Cannabidiol aqueous solubility enhancement: Comparison of three amorphous formulations strategies using different type of polymers

Acid-Catalyzed Conversion of Cannabidiol to Tetrahydrocannabinols: En Route to Demystifying Manufacturing Processes and Controlling the Reaction Outcomes

Background: Over the last decade, there has been a significant increase in the production of multiple tetrahydrocannabidiol (THC) related products via the acid catalysis of cannabidiol (CBD). The widespread availability of CBD and the unregulated or poorly regulated nature of its use have flooded the market with THC-containing products of unverifiable provenance and frequently contaminated by trace metals and residual solvents. Under non-optimized, poorly controlled, or harsh reaction conditions, these acid-catalyzed transformations yield multiple cannabinoids including Δ9-THC and Δ8-THC, along with numerous side products. These side products are rarely identified or quantified accurately, and their safety and pharmacology remain largely unknown. Aims: This review aims to present an up-to-date understanding of one of the fundamental transformations in cannabinoid chemistry: the cyclization of CBD to THC. This knowledge will facilitate the development of safer, cleaner, more affordable, and accessible cannabinoid products while guiding medical practitioners and regulators. Materials and Methods: We conducted a literature review of studies published over the last 5-6 years on the interconversion of CBD to THC. Our review focused on the following key aspects: (1) advances in understanding reaction mechanisms and optimizing desirable reaction outcomes; (2) development of new catalysts, including "green chemistry" approaches such as solid-supported acids; and (3) implementation of fit-for-purpose analytical methods to better characterize reaction outcomes and reassess the accuracy of cannabis and hemp product labeling. Results: Provided strict quality controls of materials, reaction conditions, and related isolation techniques, the latest research of the acid-catalyzed CBD cyclization shows that it is feasible to access products with elevated and consistently high quality, enriched with either CBD or THC fractions, in a cost-effective manner. Among a spectrum of possible products, easy access to low-potency THC compositions may be particularly relevant for serving the needs of medical patients consuming cannabis and hemp-derived cannabinoids including dose titration as well as to supporting safe and responsible use in recreational markets now saturated with overly potent products.

Variable pore size of mesoporous silica in improving physical stability and oral bioavailability of insoluble drugs

Mesoporous silica carriers are known to improve the solubility and bioavailability of poorly soluble Class II drugs. However, most mesoporous silica carriers available in the market have relatively low drug loading capacities. Therefore, it is essential to select the appropriate mesoporous silica carrier to control the particle size and form of poorly soluble drugs, as well as ensure efficient drug loading, particularly for drugs with large clinical dosages. In this study, three types of dendritic mesoporous silica nanoparticles (MSNs) with similar particle sizes but different pore sizes (25 nm, 15 nm, and 5 nm) were prepared, which could be degraded by 80 % in simulated intestinal fluid at pH 6.8 over 7 days. Fenofibrate (Fen) was loaded into MSNs, commercial mesoporous silica excipients, and a traditional solid dispersion excipient (PVP K-30) using the solvent evaporation method. MSNs showed a higher drug loading efficiency (about 33 %) compared to commercial excipients. The drug-loaded systems increased drug release rate and improved the hydrophilicity by reducing the contact angle. After loading, the specific surface area, pore volume, and pore size decreased. Under accelerated test condition, the rigid structure of MSNs prevented drug crystallization, avoiding the aging issues seen with traditional solid dispersions like PVP K-30, and improved the drug's long-term stability. Pharmacokinetic studies in rats showed that the bioavailability of self-made Fen capsules was 1.31 times higher than that of commercial capsules (Lipanthyl®). In summary, these results highlighted the potential of MSNs to improve the stability and oral absorption of poorly soluble drugs.

High-Pressure Dielectric Spectroscopic Studies of Amorphous CBD: Investigating Molecular Dynamics and Physical Stability Under Manufacturing Conditions of the Pharmaceuticals

Objectives: This study highlighted the key role played by high-pressure (HP) dielectric spectroscopic measurements of amorphous CBD to probe the molecular dynamics in order to examine the physical stability of the drug. The pharmacological properties of CBD assure that this can be a promising drug for the pharmaceutical industry. Hence, it is important to check the physical stability under elevated temperature and pressure conditions to understand the behavior of the drug under manufacturing conditions. Methods: This research investigated the molecular dynamics at various temperatures and pressures. We utilized the HP dielectric studies which are considered as an advanced and sensitive tool to determine both the molecular dynamics and the phase transformations. Results: This paper discusses the physical stability by analyzing the behavior of structural relaxation and crystallization tendencies of the amorphous drug under ambient and elevated pressure conditions. This study verified that amorphous CBD is highly physically stable at storage and elevated temperature conditions under ambient pressure. Conclusions: Accordingly, we examined the physical stability under elevated pressures at storage temperature, and we observed that the compression induced the crystallization of amorphous CBD. The breaking of weak hydrogen bonds present in the CBD might be the reason for this destabilization at elevated pressures. The least physical stability at high-pressure conditions was also confirmed by the broadening of the α-relaxation peak at high pressures.

Microencapsulation techniques for developing cannabidiol formulations: a review

Cannabidiol (CBD), extracted from Cannabis sativa L., holds therapeutic promise without inducing psychoactive effects seen with Δ9-tetrahydrocannabinol. Its interaction with the endocannabinoid system plays a pivotal role in regulating mood, pain perception and immune function. Nevertheless, CBD encounters hurdles in clinical application due to its poor bioavailability and water solubility. To overcome these limitations, researchers are exploring microencapsulation techniques, which involve encapsulating CBD within protective matrices. This comprehensive review offers insights into various microencapsulation methods for CBD, scrutinizing their advantages, limitations and implications for formulation optimization. By elucidating the potential of microencapsulation, this review underscores its promise in refining CBD therapy and addressing challenges associated with administration.

Cannabidiol and Hydroxypropyl-β-Cyclodextrin for the Development of Deflated Spherical-Shaped Inhalable Powder

In addition to the known therapeutic indications for cannabidiol, its administration by inhalation appears to be of great interest. Indeed, there is evidence of cannabidiol's efficacy in several physiological pathways, suggesting its potential for a wide range of applications for both local and systemic pulmonary administration like cancers. Significant advances in pulmonary drug delivery have led to innovative strategies to address the challenges of increasing the respirable fraction of drugs and standardizing inhalable products. Among different devices, dry powder inhalers offer significant advantages including high stability and ease of use. Particle engineering using techniques such as spray drying is now the focus of research and is expected to improve upon, rather than completely replace, traditional carrier-based formulations. The development of carrier-free powders (without lactose-carrier) is mainly used for medicines with low active ingredient doses, which limits the technology. Previously, we demonstrated the benefits of using a cyclodextrin to obtain deflated spherical-shaped powders by spray drying. In this study the potential of this excipient with a very poorly water-soluble active molecule was investigated. Inhalable cannabidiol powders were developed by spray drying, using the solubility enhancers hydroxypropyl-beta-cyclodextrin and ethanol to optimize cannabidiol water-solubility. Electron microscopy images revealed consistent deflated spherical shapes, while particle size analysis showed low polydispersity and suitable sizes for deep lung deposition (2 µm). The selected engineered powders (without ethanol) had very high fine particle fractions (> 60%) due to their deflated surface. Finally, the powder was instantly solubilized leading to drug dissolution, which is important for therapeutic efficacy. In conclusion, this study successfully develops a cannabidiol inhalation powder by particle engineering having suitable aerosolization behavior. Due to the speed of the process and the performance of the finished product, this work opens the door for future studies. It has been shown that active molecules that are only slightly soluble in water can be formulated effectively as a powder for inhalation. Other molecules could be tested and subsequent in vivo studies conducted to demonstrate correlation with these in vitro results.

Selection of In Vivo Relevant Dissolution Test Parameters for the Development of Cannabidiol Formulations with Enhanced Oral Bioavailability

Background: Cannabidiol (CBD) shows interesting therapeutic properties but has yet to demonstrate its full potential in clinical trials partly due to its low solubility in physiologic media. Two different formulations of CBD (amorphous and lipid-based) have been optimized and enable an increase in bioavailability in piglets. In vivo studies are time-consuming, costly and life-threatening. Therefore, we need to develop in vitro tests that can predict what will happen in vivo. Methods: Comparisons in terms of dissolution were made especially by using different media (FaSSGF, FaSSIF, FeSSIF, HCl 0.1N with or without SLS, phosphate buffer pH 6.8 with or without SLS) and different conditions (sink or non-sink conditions). These in vitro results were confronted with in vivo results to select the most appropriate dissolution test conditions. Results: The importance of the presence of surfactants to enable solubilization of CBD was demonstrated. Neutral media enabled a relatively good prediction of the extent of absorption observed in vivo, whereas the rate of absorption was more complicated to predict. Conclusions: FeSSIF media, and FaSSIF sink media to a lesser extent, were the only compositions enabling predictions of both extent and rate, indicating that emulsification is possibly a major contributor to the in vivo availability of the drug.

Enhancing Patient-Centric Drug Development: Coupling Hot Melt Extrusion with Fused Deposition Modeling and Pressure-Assisted Microsyringe Additive Manufacturing Platforms with Quality by Design

In recent years, with the increasing patient population, the need for complex and patient-centric medications has increased enormously. Traditional manufacturing techniques such as direct blending, high shear granulation, and dry granulation can be used to develop simple solid oral medications. However, it is well known that "one size fits all" is not true for pharmaceutical medicines. Depending on the age, sex, and disease state, each patient might need a different dose, combination of medicines, and drug release pattern from the medications. By employing traditional practices, developing patient-centric medications remains challenging and unaddressed. Over the last few years, much research has been conducted exploring various additive manufacturing techniques for developing on-demand, complex, and patient-centric medications. Among all the techniques, nozzle-based additive manufacturing platforms such as pressure-assisted microsyringe (PAM) and fused deposition modeling (FDM) have been investigated thoroughly to develop various medications. Both nozzle-based techniques involve the application of thermal energy. However, PAM can also be operated under ambient conditions to process semi-solid materials. Nozzle-based techniques can also be paired with the hot melt extrusion (HME) process for establishing a continuous manufacturing platform by employing various in-line process analytical technology (PAT) tools for monitoring critical process parameters (CPPs) and critical material attributes (CMAs) for delivering safe, efficacious, and quality medications to the patient population without compromising critical quality attributes (CQAs). This review covers an in-depth discussion of various critical parameters and their influence on product quality, along with a note on the continuous manufacturing process, quality by design, and future perspectives.

Responsive Supramolecular Nanomicelles Formed through Self-Assembly of Acyclic Cucurbit[n]uril for Targeted Drug Delivery to Cancer Cells

The supramolecular drug delivery systems (SDDSs) based on host-guest recognition through noncovalent interactions, capable of responsive behavior and dynamic switching to external stimuli, have attracted considerable attention in cancer therapy. In this study, a targeted dual-functional drug delivery system was designed and synthesized. A hydrophilic macrocyclic host molecule (acyclic cucurbit[n]uril ACB) was modified with folic acid (FA) as a targeting ligand. The guest molecule consists of a disulfide bond attached to adamantane (DA) and cannabidiol (CBD) at both ends of the response element of glutathione. Recognition and self-assembly of host and guest molecules successfully functionalize supramolecular nanomicelles (SNMs), targeting cancer cells and releasing drugs in a high glutathione environment. The interactions between host and guest molecules were investigated by using nuclear magnetic resonance (NMR), fluorescence titration, Fourier-transform infrared spectroscopy (FT-IR), and thermal analysis (TGA). Transmission electron microscopy (TEM) and dynamic light scattering (DLS) confirmed the nanostructure of the SNMs. Experimentation with 5,5'-dithiobis (2-nitrobenzoic acid) (DTNB) demonstrated the responsiveness of SNMs to glutathione (GSH). In vitro cytotoxicity assays demonstrated that SNMs had a greater targeting efficacy for four types of cancer cells (HeLa, HCT-116, A549, and HepG2) compared to normal 293T cells. Cellular uptake studies revealed that HeLa cells more readily absorbed SNMs, leading to their accumulation in the tumor cell cytoplasm. Fluorescence colocalization assays verified that SNMs efficiently accumulated in organelles related to energy metabolism and signaling, including mitochondria and the endoplasmic reticulum, affecting cellular metabolic death. Both flow cytometry and confocal nuclear staining assays confirmed that SNMs effectively induced apoptosis over time, ultimately resulting in the death of cancer cells. These findings demonstrate that SNMs exhibit excellent targeting ability, responsiveness, high bioavailability, and stability, suggesting significant potential in drug delivery applications.

CBD-Loaded Nanostructured Lipid Carriers: Optimization, Characterization, and Stability

Cannabidiol (CBD) has demonstrated its potential to enhance depression treatment through various biological pathways. However, the application potential of CBD is significantly impeded by its polymorphic nature, limited water solubility, and hepatic first-pass metabolism. To improve chemical stability and water solubility, nanostructured lipid carriers loaded with CBD (CBD-NLCs) were developed using a hot-melt emulsification method and optimized by response surface methodology (RSM). The process parameters were optimized using a four-factor and three-level Box-Behnken experimental design consisting of 29 experiments. The CBD-NLCs were formulated and characterized, demonstrating desirable properties, including a mean particle size of 54.33 nm, a PDI value of 0.118, a zeta potential of -29.7 mV, and an impressive encapsulation efficiency rate of 87.58%. The nanoparticles were found to possess an approximately spherical shape, as revealed by scanning and transmission electron microscopy. The stability studies have demonstrated that CBD-NLCs effectively mitigated the photodegradation of CBD and exhibited a stable behavior for 42 days when stored. The CBD-NLCs displayed a biphasic release profile characterized by an initial burst release (over 50% of CBD released within 20 min) followed by a subsequent gradual and sustained release, aligned with first-order kinetics and Fickian diffusion. These findings demonstrate the potential suitability of this formulation as a carrier for CBD in food fortification and pharmaceutical applications.

Production of Biopolymeric Microparticles to Improve Cannabigerol Bioavailability

Cannabigerol's (CBG) therapeutic effects are limited by its poor water solubility and low dissolution rate. To improve these properties, supercritical CO2-assisted atomization (SAA) was applied to produce coprecipitates, i.e., CBG nanoparticles coprecipitated in polyvinylpyrrolidone (PVP) microparticles. The experiments were performed by varying the CBG/PVP mass ratio (R) and the overall concentration of solutes CBG+PVP to study the influence of these parameters on particle morphology, particle size, and size distribution. Periodic dynamic light scattering (DLS) analysis was performed at regular time intervals to measure the size of CBG nanoparticles in PVP microparticles. It showed that CBG nanoparticles down to 105 nm were successfully produced through SAA. Dissolution tests were used to verify that a reduction of CBG particle size significantly increased its dissolution rate. In the liquid medium adopted, untreated CBG powder was released in 210 min, whereas CBG nanoparticles of 105 nm were completely dissolved in only 15 min.

High-loading cannabidiol powders for inhalation

Limited attempts have been made previously to develop high-loading CBD inhalable powders, which are essential for high dose delivery. Therefore, this study aimed to develop and characterise inhalable powders with ≥ 95 % w/w CBD by wet ball milling. The effects of magnesium stearate (2 % and 5 %) and inhaler resistance (low-resistance and high-resistance RS01 inhalers) on aerosol performance were also compared. Wet ball milling produced CBD powders with > 50 % production yield. The milled particles showed irregular shapes. The powders were crystalline with minimal amorphous content, low residual solvent level (<1%), and low moisture sorption (<4%). Magnesium stearate improved both the emitted and fine particle fractions. The aerodynamic particle size distribution of the formulations differed between the low-resistance and high-resistance RS01 inhalers. The latter decreased throat deposition but increased inhaler retention. The dissolution profiles showed that all three formulations released CBD steadily and plateaued at 30 min. The best scenario was CBD with 5 % magnesium stearate dispersed from the high resistance RS01 inhaler, showing the highest FPF with the lowest throat deposition. This combination may be tested in vivo in the future to investigate its pharmacokinetic profile.

Cannabidiol and its application in the treatment of oral diseases: therapeutic potentials, routes of administration and prospects

Cannabidiol (CBD), one of the most important active ingredients in cannabis, has been reported to have some pharmacological effects such as antibacterial and analgesic effects, and to have therapeutic potential in the treatment of oral diseases such as oral cancer, gingivitis and periodontal diseases. However, there is a lack of relevant systematic research and reviews. Therefore, based on the etiology and clinical symptoms of several common oral diseases, this paper focuses on the therapeutic potential of CBD in periodontal diseases, pulp diseases, oral mucosal diseases, oral cancer and temporomandibular joint diseases. The pharmacological effects of CBD and the distribution and function of its receptors in the oral cavity are also summarized. In order to provide reference for future research and further clinical application of CBD, we also summarize several possible routes of administration and corresponding characteristics. Finally, the challenges faced while applying CBD clinically and possible solutions are discussed, and we also look to the future.

Spray freeze dried cannabidiol with dipalmitoylphosphatidylcholine (DPPC) for inhalation and solubility enhancement

Pulmonary delivery is an efficient route of administration to deliver cannabidiol (CBD) due to the high bioavailability and fast onset of action. The major formulation challenge is the poor aqueous solubility of CBD. This study aimed to produce inhalable CBD powders with enhanced solubility and characterise their solid-state properties. CBD was spray freeze dried with mannitol or trehalose dihydrate with and without dipalmitoylphosphatidylcholine (DPPC). All four powders had acceptable yields at > 70 % with porous and spherical particles. The two crystalline mannitol powders contained less residual solvent than both amorphous trehalose ones. The addition of DPPC did not affect the crystallinity and residual solvent level of the powders. Instead, DPPC made the particles more porous, decreased the particle size from 19-23 µm to 11-13 µm, and increased CBD solubility from 0.36 µg/mL to over 2 µg/mL. The two DPPC powders were dispersed from a low resistance RS01 inhaler, showing acceptable aerosol performance with emitted fractions at 91-93 % and fine particle fractions < 5 µm at 34-43 %. These formulations can be used as a platform to deliver CBD and other cannabinoids by inhalation.

Evaluation of amorphous and lipid-based formulation strategies to increase the in vivo cannabidiol bioavailability in piglets

Cannabidiol (CBD) suffers from poor oral bioavailability due to poor aqueous solubility and high metabolism, and is generally administered in liquid lipid vehicles. Solid-state formulations of CBD have been developed, but their ability to increase the oral bioavailability has not yet been proven in vivo. Various approaches are investigated to increase this bioavailability. This study aimed to demonstrate the enhancement of the oral bioavailability of oral solid dosage forms of amorphous CBD and lipid-based CBD formulation compared to crystalline CBD. Six piglets received the three formulations, in a cross-over design. CBD and 7 - COOH - CBD, a secondary metabolite used as an indicator of hepatic degradation, were analyzed in plasma. A 10.9-fold and 6.8-fold increase in oral bioavailability was observed for the amorphous and lipid formulations, respectively. However, the lipid-based formulation allowed reducing the inter-variability when administered to fasted animals. An entero-hepatic cycle was confirmed for amorphous formulations. Finally, this study showed that the expected protective effect of lipids against hepatic degradation of the lipid-based formulation did not occur, since the ratio CBD/metabolite was higher than that of the amorphous one.

Permeation-Enhancing Strategies for Transdermal Delivery of Cannabinoids

Introduction: This review aims to provide an overview of the advancements and status of clinical studies and potential permeation-enhancing strategies in the transdermal delivery of cannabinoids. Methods: A systematic and comprehensive literature search across academic databases, search engines, and online sources to identify relevant literature on the transdermal administration of cannabinoids. Results: Cannabinoids have proven beneficial in the treatment of wide-ranging physical and psychological disorders. A shift toward legalized cannabinoid products has increased both interests in cannabinoid research and the development of novel medicinal exploitations of cannabinoids in recent years. Oral and pulmonary delivery of cannabinoids has several limitations, including poor bioavailability, low solubility, and potential side effects. This has diverted scientific attention toward the transdermal route, successfully overcoming these hurdles by providing higher bioavailability, safety, and patient compliance. Yet, due to the barrier properties of the skin and the lipophilic nature of cannabinoids, there is a need to increase the permeation of the drugs to the underneath layers of skin to reach desired therapeutic plasma levels. Literature describing detailed clinical trials on cannabinoid transdermal delivery, either with or without permeation-enhancing strategies, is limited. Conclusion: The limited number of reports indicates that increased attention is needed on developing and examining efficient transdermal delivery systems for cannabinoids, including patch design and composition, drug-patch interaction, clinical effectiveness and safety in vivo, and permeation-enhancing strategies.

Cutaneous Delivery and Biodistribution of Cannabidiol in Human Skin after Topical Application of Colloidal Formulations

The objective of this study was to investigate the cutaneous delivery of cannabidiol (CBD) from aqueous formulations developed for the targeted local treatment of dermatological conditions. CBD was formulated using a proprietary colloidal drug delivery system (VESIsorb®) into an aqueous colloidal solution at 2% (ACS 2%) and two colloidal gels (CG 1% and CG 2%, which contained 1% and 2% CBD, respectively). Two basic formulations containing CBD (5% in propylene glycol (PG 5%) and a 6.6% oil solution (OS 6.6%)) and two marketed CBD products (RP1 and RP2, containing 1% CBD) were used as comparators. Cutaneous delivery and cutaneous biodistribution experiments were performed using human abdominal skin (500-700 µm) under infinite- and finite-dose conditions with 0.5% Tween 80 in the PBS receiver phase. The quantification of CBD in the skin samples was performed using a validated UHPLC-MS/MS method and an internal standard (CBD-d3). The cutaneous deposition of CBD under finite-dose conditions demonstrated the superiority of CG 1%, CG 2%, and ACS 2% over the marketed products; CG 1% had the highest delivery efficiency (5.25%). Cutaneous biodistribution studies showed the superiority of the colloidal systems in delivering CBD to the viable epidermis, and the upper and lower papillary dermis, which are the target sites for the treatment of several dermatological conditions.

An Intravenous Pharmacokinetic Study of Cannabidiol Solutions in Piglets through the Application of a Validated Ultra-High-Pressure Liquid Chromatography Coupled to Tandem Mass Spectrometry Method for the Simultaneous Quantification of CBD and Its Carboxylated Metabolite in Plasma

Cannabidiol (CBD) has multiple therapeutic benefits that need to be maximized by optimizing its bioavailability. Numerous formulations are therefore being developed and their pharmacokinetics need to be studied, requiring analytical methods and data from intravenous administration. As CBD is susceptible to hepatic metabolism, the requirement of any method is to quantify metabolites such as 7-COOH-CBD. We demonstrated that CBD and 7-COOH-CBD could be simultaneously and correctly quantified in piglet plasma by using an UHPLC-MS/MS technique. The validated method allowed for an accurate bioanalysis of an intravenously injected solution consisting of CBD-HPβCD complexes. The experimental pharmacokinetic profile of CBD showed multi-exponential decay characterized by a fast apparent distribution half-life (0.25 h) and an elimination half-life of two hours. The profile of 7-COOH-CBD was not linked with the first-pass metabolism, since 80% of the maximum metabolite concentration was reached at the first sampling time point, without any decrease during the period of study. A two-compartment model was optimal to describe the experimental CBD profile. This model allowed us to calculate macro-micro constants and volumes of distribution (Vss = 3260.35 ± 2286.66 mL) and clearance (1514.5 ± 261.16 mL·h-1), showing that CBD is rapidly distributed to peripheral tissues once injected and slowly released into the bloodstream.

Novel phenolate salts of bioactive agents: Cannabidiol phenolate salts

Bioactive phenolic compounds are commonly found in medications, with examples including apomorphine, estrone, thymol, estradiol, propofol, o-phenylphenol, l-Dopa, doxorubicin, tetrahydrocannabinol (THC), and cannabidiol (CBD). This study is the first to explore the creation and assessment of metal and ammonium phenolate salts using CBD as an example. CBD is used in medicine to treat anxiety, insomnia, chronic pain, and inflammation, but its bioavailability is limited due to poor water solubility. In this study exploit a synthetic route to convert CBD into anionic CBD-salts to enhance water solubility. Various CBD-salts with metal and ammonium counterions such as lithium (Li+), sodium (Na+), potassium (K+), choline hydroxide ([(CH3)3NCH2CH2OH]+), and tetrabutylammonium ([N(C4H9)4]+) have been synthesized and characterized. These salts are obtained in high yields, ranging from 74 % to 88 %, through a straightforward dehydration reaction between CBD and alkali metal hydroxides (LiOH, NaOH, KOH) or ammonium hydroxides (choline hydroxide, tetrabutylammonium hydroxide). These reactions are conducted in either ethanol, methanol, or a methanol:water mixture, maintaining a 1:1 molar ratio between the reactants. Comprehensive characterization using Fourier-Transform Infrared Spectroscopy (FT-IR), Nuclear Magnetic Resonance (NMR) spectroscopy, and elemental (CHN) analysis confirms the formation of CBD-salts, as evidenced by the absence of aromatic hydroxyl resonances or stretching frequencies. The molecular formulas of CBD salts were determined based on CHN analysis, and CBD quantification from acid regeneration experiments. Characterization data confirms that each CBD phenolate in a specific CBD salt was electrostatically stabilized by one of the either alkali metal or ammonium ion. The CBD-salts are highly susceptible to acidic conditions, readily reverting back to the original CBD. The percentage and purity of CBD in the CBD-metal/ammonium salts have been studied using High-Performance Liquid Chromatography (HPLC) analysis. Solubility studies indicate that the conversion of CBD into CBD salts significantly enhances its solubility in water, ranging from 110 to 1606 folds greater than pure CBD. Furthermore, the pharmacokinetic evaluation of oral administration of CBD-salts compared to CBD were determined in rats.

Feasibility study of the use of a homemade direct powder extrusion printer to manufacture printed tablets with an immediate release of a BCS II molecule

Among the various 3D printing techniques, FDM is the most studied in pharmaceutical research. However, it requires the fabrication of filaments with suitable mechanical properties using HME, which can be laborious and time-consuming. DPE has emerged as a single-step printing technique that can overcome FDM limits as it enables the direct printing of powder blends without the need of filaments. This study demonstrated the manufacturing of cylindrical-shaped printed tablets containing CBD, a BCS II molecule, with an immediate release. Different blends of PEO/E100 and PEO/SOL, each with 10 % of CBD, were printed and tested according to the Eur. Ph. for uncoated tablets. Each printed cylinder met the Eur. Ph. specifications for friability, mass variation and mass uniformity. However, only the E100-based formulations enabled a CBD immediate release, as formulations containing SOL formed a gel once in contact with the dissolution medium, reducing the drug dissolution rate.

Development, Characterization and Pharmacological Evaluation of Cannabidiol-Loaded Long Circulating Niosomes

Cannabidiol (CBD) is a promising drug candidate with pleiotropic pharmacological activity, whose low aqueous solubility and unfavorable pharmacokinetics have presented obstacles to its full clinical implementation. The rational design of nanocarriers, including niosomes for CBD encapsulation, can provide a plausible approach to overcoming these limitations. The present study is focused on exploring the feasibility of copolymer-modified niosomes as platforms for systemic delivery of CBD. To confer steric stabilization, the niosomal membranes were grafted with newly synthesized amphiphilic linear or star-shaped 3- and 4-arm star-shaped copolymers based on polyglycidol (PG) and poly(ε-caprolactone) (PCL) blocks. The niosomes were prepared by film hydration method and were characterized by DLS, cryo-TEM, encapsulation efficacy, and in vitro release. Free and formulated cannabidiol were further investigated for cytotoxicity and pro-apoptotic and anti-inflammatory activities in vitro in three human tumor cell lines. The optimal formulation, based on Tween 60:Span60:Chol (3.5:3.5:3 molar ration) modified with 2.5 mol% star-shaped 3-arm copolymer, is characterized by a size of 235 nm, high encapsulation of CBD (94%), and controlled release properties. Niosomal cannabidiol retained the antineoplastic activity of the free agent, but noteworthy superior apoptogenic and inflammatory biomarker-modulating effects were established at equieffective exposure vs. the free drug. Specific alterations in key signaling molecules, implicated in programmed cell death, cancer cell biology, and inflammation, were recorded with the niosomal formulations.

Inhalation powder development without carrier: How to engineer ultra-flying microparticles?

Particle engineering technologies have led to the commercialization of new inhaled powders like PulmoSolTM or PulmoSphereTM. Such platforms are produced by spray drying, a well-known process popular for its versatility, thanks to wide-ranging working parameters. Whereas these powders contain a high drug-loading, we have studied a low-dose case, in optimizing the production of powders with two anti-asthmatic drugs, budesonide and formoterol. Using a Design of Experiments approach, 27 powders were produced, with varying excipient mixes (cyclodextrins, raffinose and maltodextrins), solution concentrations, and spray drying parameters in order to maximize deep lung deposition, measured through fine particle fraction (next generation impactor). Based on statistical analysis, two powders made of hydropropyl-β-cyclodextrin alone or mixed with raffinose and L-leucine were selected. Indeed, the two powders demonstrated very high fine particle fraction (>55%), considerably better than commercially available products. Deep lung deposition has been correlated to very fine particle size and lower microparticles interactions shown by laser diffraction assays at different working pressures, and particle morphometry. Moreover, the two drugs would be predicted to deposit homogeneously into the lung according to impaction studies. Uniform delivery is fundamental to control symptoms of asthma. In this study, we develop carrier-free inhalation powders promoting very efficient lung deposition and demonstrate the high impact of inter-particular interactions intensity on their aerosolization behaviour.

Co-Dispersion Delivery Systems with Solubilizing Carriers Improving the Solubility and Permeability of Cannabinoids (Cannabidiol, Cannabidiolic Acid, and Cannabichromene) from Cannabis sativa (Henola Variety) Inflorescences

Cannabinoids: cannabidiol (CBD), cannabidiolic acid (CBDA), and cannabichromene (CBC) are lipophilic compounds with limited water solubility, resulting in challenges related to their bioavailability and therapeutic efficacy upon oral administration. To overcome these limitations, we developed co-dispersion cannabinoid delivery systems with the biopolymer polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol (Soluplus) and magnesium aluminometasilicate (Neusilin US2) to improve solubility and permeability. Recognizing the potential therapeutic benefits arising from the entourage effect, we decided to work with an extract instead of isolated cannabinoids. Cannabis sativa inflorescences (Henola variety) with a confirming neuroprotective activity were subjected to dynamic supercritical CO2 (scCO2) extraction and next they were combined with carriers (1:1 mass ratio) to prepare the co-dispersion cannabinoid delivery systems (HiE). In vitro dissolution studies were conducted to evaluate the solubility of CBD, CBDA, and CBC in various media (pH 1.2, 6.8, fasted, and fed state simulated intestinal fluid). The HiE-Soluplus delivery systems consistently demonstrated the highest dissolution rate of cannabinoids. Additionally, HiE-Soluplus exhibited the highest permeability coefficients for cannabinoids in gastrointestinal tract conditions than it was during the permeability studies using model PAMPA GIT. All three cannabinoids exhibited promising blood-brain barrier (BBB) permeability (Papp higher than 4.0 × 10-6 cm/s), suggesting their potential to effectively cross into the central nervous system. The improved solubility and permeability of cannabinoids from the HiE-Soluplus delivery system hold promise for enhancement in their bioavailability.

Continuous Manufacturing of Solvent-Free Cyclodextrin Inclusion Complexes for Enhanced Drug Solubility via Hot-Melt Extrusion: A Quality by Design Approach

Conventional cyclodextrin complexation enhances the solubility of poorly soluble drugs but is solvent-intensive and environmentally unfavorable. This study evaluated solvent-free hot-melt extrusion (HME) for forming cyclodextrin inclusion complexes to improve the solubility and dissolution of ibuprofen (IBU). Molecular docking confirmed IBU's hosting in Hydroxypropyl-β-cyclodextrin (HPβ-CD), while phase solubility revealed its complex stoichiometry and stability. In addition, an 11 mm twin-screw co-rotating extruder with PVP VA-64 as an auxiliary substance aided the complex formation and extrusion. Using QbD and the Box-Behnken design, we studied variables (barrel temperature, screw speed, and polymer concentration) and their impact on solubility and dissolution. The high polymer concentration and high screw speeds positively affected the dependent variables. However, higher temperatures had a negative effect. The lowest barrel temperature set near the Tg of the polymer, when combined with high polymer concentrations, resulted in high torques in HME and halted the extrusion process. Therefore, the temperature and polymer concentration should be selected to provide sufficient melt viscosities to aid the complex formation and extrusion process. Studies such as DSC and XRD revealed the amorphous conversion of IBU, while the inclusion complex formation was demonstrated by ATR and NMR studies. The dissolution of ternary inclusion complexes (TIC) produced from HME was found to be ≥85% released within 30 min. This finding implied the high solubility of IBU, according to the US FDA 2018 guidance for highly soluble compounds containing immediate-release solid oral dosage forms. Overall, the studies revealed the effect of various process parameters on the formation of CD inclusion complexes via HME.

Comparative study of encapsulated cannabidiol ternary solid dispersions prepared by different techniques: The application of a novel technique jet milling

Jet milling is a common technique in ultrafine powder preparation field. It has never been used to design delivery systems. Cannabidiol (CBD) is an important cannabinoid of hemp but poor aqueous solubility limited its applications. In this study, solid dispersion (SD) technique was combined with cyclodextrin complexation technique, and jet milling was used for the first time to prepare SDs for improving CBD solubility. Different characterizations demonstrated that the dispersion effect and complexation structure of CBD SD3 prepared by jet milling were comparable to that of CBD SD2 prepared by spray drying (a common solution-based method), and were better than that of CBD SD1 prepared by cogrinding. The water solubility of CBD was increased to 20.902 μg/mL (909-fold) in CBD SD3. Besides, the antioxidant activity and cytotoxicity to tumor cells of CBD were enhanced by dispersion. This work indicated that jet milling, as a new technique with low cost and excellent applicability, could be further developed for the delivery of food functional factors or bioactive molecules.

A Physiologically-Based Pharmacokinetic Model for Cannabidiol in Healthy Adults, Hepatically-Impaired Adults, and Children

Cannabidiol (CBD) is available as a prescription oral drug that is indicated for the treatment of some types of epilepsy in children and adults. CBD is also available over-the-counter and is used to self-treat a variety of other ailments, including pain, anxiety, and insomnia. Accordingly, CBD may be consumed with other medications, resulting in possible CBD-drug interactions. Such interactions can be predicted in healthy and hepatically-impaired (HI) adults and in children through physiologically based pharmacokinetic (PBPK) modeling and simulation. These PBPK models must be populated with CBD-specific parameters, including the enzymes that metabolize CBD in adults. In vitro reaction phenotyping experiments showed that UDP-glucuronosyltransferases (UGTs, 80%), particularly UGT2B7 (64%), were the major contributors to CBD metabolism in adult human liver microsomes. Among the cytochrome P450s (CYPs) tested, CYP2C19 (5.7%) and CYP3A (6.5%) were the major CYPs responsible for CBD metabolism. Using these and other physicochemical parameters, a CBD PBPK model was developed and validated for healthy adults. This model was then extended to predict CBD systemic exposure in HI adults and children. Our PBPK model successfully predicted CBD systemic exposure in both populations within 0.5- to 2-fold of the observed values. In conclusion, we developed and validated a PBPK model to predict CBD systemic exposure in healthy and HI adults and children. This model can be used to predict CBD-drug or CBD-drug-disease interactions in these populations. SIGNIFICANCE STATEMENT: Our PBPK model successfully predicted CBD systemic exposure in healthy and hepatically-impaired adults, as well as children with epilepsy. This model could be used in the future to predict CBD-drug or CBD-drug-disease interactions in these special populations.

Preformulation study for the selection of a suitable polymer for the development of ellagic acid-based solid dispersion using hot-melt extrusion

Ellagic acid is one of the most studied polyphenolic compounds due to its numerous promising therapeutic properties. However, this therapeutic potential remains difficult to exploit owing to its low solubility and low permeability, resulting in low oral bioavailability. In order to allow an effective therapeutic application of EA, it is therefore necessary to develop strategies that sufficiently enhance its solubility, dissolution rate and bioavailability. For this purpose, solid dispersions based on pre-selected polymers such as Eudragit® EPO, Soluplus® and Kollidon® VA 64, with 5% w/w ellagic acid loading were prepared by hot extrusion and characterized by X-ray diffraction, FTIR spectroscopy and in vitro dissolution tests in order to select the most suitable polymer for future investigations. The results showed that Eudragit® EPO was the most promising polymer for ellagic acid solid dispersions development because its extrudates allowed to obtain a solution supersaturated in ellagic acid that was stable for at least 90 min. Moreover, the resulting apparent solubility was 20 times higher than the actual solubility of ellagic acid. The extrudates also showed a high dissolution rate of ellagic acid (96.25% in 15 min), compared to the corresponding physical mixture (6.52% in 15 min) or the pure drug (1.56% in 15 min). Furthermore, increasing the loading rate of ellagic acid up to 12% in extrudates based on this polymer did not negatively influence its release profile through dissolution tests.

Aqueous cannabidiol β-cyclodextrin complexed polymeric micelle nasal spray to attenuate in vitro and ex-vivo SARS-CoV-2-induced cytokine storms

Cannabidiol (CBD) has a number of biological effects by acting on the cannabinoid receptors CB₁ and CB₂. CBD may be involved in anti-inflammatory processes via CB₁ and CB₂ receptors, resulting in a decrease of pro-inflammatory cytokines. However, CBD's poor aqueous solubility is a major issue in pharmaceutical applications. The aim of the present study was to develop and evaluate a CBD nasal spray solution. A water-soluble CBD was prepared by complexation with β-cyclodextrin (β-CD) at a stoichiometric ratio of 1:1 and forming polymeric micelles using poloxamer 407. The mixture was then lyophilized and characterized using FT-IR, DSC, and TGA. CBD-β-CD complex-polymeric micelles were formulated for nasal spray drug delivery. The physicochemical properties of the CBD-β-CD complex-polymeric micelle nasal spray solution (CBD-β-CDPM-NS) were assessed. The results showed that the CBD content in the CBD-β-CD complex polymeric micelle powder was 102.1 ± 0.5%. The CBD-β-CDPM-NS was a clear colorless isotonic solution. The particle size, zeta potential, pH value, and viscosity were 111.9 ± 0.7 nm, 0.8 ± 0.1 mV, 6.02 ± 0.02, and 12.04 ± 2.64 cP, respectively. This formulation was stable over six months at ambient temperature. The CBD from CBD-β-CDPM-NS rapidly released to 100% within 1 min. Ex-vivo permeation studies of CBD-β-CDPM-NS through porcine nasal mucosa revealed a permeation rate of 4.8 μg/cm²/min, which indicated that CBD was effective in penetrating nasal epithelial cells. CBD-β-CDPM-NS was tested for its efficacy and safety in terms of cytokine production from nasal immune cells and toxicity to nasal epithelial cells. The CBD-β-CDPM-NS was not toxic to nasal epithelial at the concentration of CBD equivalent to 3.125-50 μg/mL. When the formulation was subjected to bioactivity testing against monocyte-like macrophage cells, it proved that the CBD-β-CDPM-NS has the potential to inhibit inflammatory cytokines. CBD-β-CDPM-NS demonstrated the formulation's ability to reduce the cytokine produced by S-RBD stimulation in ex vivo porcine nasal mucosa in both preventative and therapeutic modes.

Cannabidiol for the Treatment of Brain Disorders: Therapeutic Potential and Routes of Administration

The use of cannabidiol (CBD) for treating brain disorders has gained increasing interest. While the mechanism of action of CBD in these conditions is still under investigation, CBD has been shown to affect numerous different drug targets in the brain that are involved in brain disorders. Here we review the preclinical and clinical evidence on the potential therapeutic use of CBD in treating various brain disorders. Moreover, we also examine various drug delivery approaches that have been applied to CBD. Due to the slow absorption and low bioavailability with the current oral CBD therapy, more efficient routes of administration to bypass hepatic metabolism, particularly pulmonary delivery, should be considered. Comparison of pharmacokinetic studies of different delivery routes highlight the advantages of intranasal and inhalation drug delivery over other routes of administration (oral, injection, sublingual, buccal, and transdermal) for treating brain disorders. These two routes of delivery, being non-invasive and able to achieve fast absorption and increase bioavailability, are attracting increasing interest for CBD applications, with more research and development expected in the near future.

Production challenges of tablets containing lipid excipients: Case study using cannabidiol as drug model

The aims of this study were, firstly, to select an optimal lipid solid dispersion of cannabidiol among different lipid excipients (Gelucire® 50/13, 48/16, 44/14 and Labrasol®) and inorganic carriers (colloidal silica, Syloid® XDP and Neusilin® US2) through a screening plan. The enhancement of aqueous solubility of cannabidiol from a free-flowing powder with adequate drug content was obtained by mixing cannabidiol (20%) with Gelucire® 50/13 (40%; Gattefossé, France), both incorporated inside mesopores of mesoporous silica Syloid® XDP (40%; Grace, Germany). Secondly, we have studied the tableting properties of this selected dispersion through a Design of Experiments (DoE) by manufacturing tablets with other excipients with using a compression simulator (Styl'One® Evo, Medelpharm, France). The design of experiments included the percentage of lipid solid dispersion, of glidant, of lubricant and different compression forces. The dissolution efficiency, the drug content, the tensile strength and the ejection force were analyzed. The DoE showed that % of dispersion as well as compression forces were the main influential variables. An exit of lipid materials outside the mesopores of silica due to compression process has been highlighted, reflected by reduced tensile strength. This study showed the possibility of manufacturing tablets with lipid materials even if limitations have been highlighted. Indeed, the dispersion percentage must not exceed 27% and compression forces up to 13 kN are required to produce lipid tablets with optimal properties.

The Fundamental Role of Lipids in Polymeric Nanoparticles: Dermal Delivery and Anti-Inflammatory Activity of Cannabidiol

This report presents a nanoparticulate platform for cannabidiol (CBD) for topical treatment of inflammatory conditions. We have previously shown that stabilizing lipids improve the encapsulation of CBD in ethyl cellulose nanoparticles. In this study, we examined CBD release, skin permeation, and the capability of lipid-stabilized nanoparticles (LSNs) to suppress the release of IL-6 and IL-8. The nanoparticles were stabilized with cetyl alcohol (CA), stearic acid (SA), lauric acid (LA), and an SA/LA eutectic combination (SALA). LSN size and concentration were measured and characterized by differential scanning calorimetry (DSC), in vitro release of loaded CBD, and skin permeability. IL-6 and IL-8 secretions from TNF-α-induced HaCaT cells were monitored following different LSN treatments. CBD released from the LSNs in dispersion at increasing concentrations of polysorbate 80 showed non-linear solubilization, which was explained by recurrent precipitation. A significant high release of CBD in a cell culture medium was shown from SALA-stabilized nanoparticles. Skin permeation was >30% lower from SA-stabilized nanoparticles compared to the other LSNs. Investigation of the CBD-loaded LSNs' effect on the release of IL-6 and IL-8 from TNF-α-induced HaCaT cells showed that nanoparticles stabilized with CA, LA, or SALA were similarly effective in suppressing cytokine release. The applicability of the CBD-loaded LSNs to treat topical inflammatory conditions has been supported by their dermal permeation and release inhibition of pro-inflammatory cytokines.

Structural Investigation of Beta-Cyclodextrin Complexes with Cannabidiol and Delta-9-Tetrahydrocannabinol in 1:1 and 2:1 Host-Guest Stoichiometry: Molecular Docking and Density Functional Calculations

The complexation of β-cyclodextrin (β-CD) with cannabidiol (CBD) and Δ⁹-tetrahydrocannabinol (THC) was investigated using molecular docking and M062X/6-31G(d,p) calculations. The calculations suggested two possible complex formations of 1:1 and 2:1 host-guest molecular ratio of β-CD with CBD and THC. The preferred orientation of all complexes in this study exhibited the hydrogen bonding between hydroxy-substituted benzene ring of CBD and THC with the β-CD's secondary hydroxy groups at the wide rim. The calculated complexation energies indicate that formation of the 2:1 complexes (-83.53 to -135.36 kcal/mol) was more energetically favorable and chemically stable than the 1:1 complexes (-30.00 to -34.92 kcal/mol). However, the deformation energies of the host and the guest components in the 2:1 complexes (37.47-96.91 kcal/mol) are much higher than those in the 1:1 complexes (3.49-8.69 kcal/mol), which means the formation processes of the 2:1 complexes are more difficult due to the rigidity of the dimeric β-CDs. Therefore, the inclusion complexes of β-CD with CBD and THC are more likely to be in 1:1 host-guest ratio than in 2:1 molecular ratio. The results of this study supported the experimental results that the complexation constant of 1:1 β-CD/CBD (Ks = 300 M^-1) is greater than that of 2:1 β-CDs/CBD (Kss = 0.833 M^-1). Altogether, this study introduced the fitting parameters that could indicate the stability of the molecular fits in complex formation of each stoichiometry host-guest ratio, which are important for the assessment of the inclusion mechanisms as well as the relationships of reactants and products in chemical reactions.

Oral inhalation of cannabidiol delivered from a metered dose inhaler to alleviate cytokine production induced by SARS-CoV-2 and pollutants

Cannabidiol (CBD) was formulated as a metered dose inhaler (CBD-MDI) and evaluated in vitro for its efficacy as an inhaled dosage form against inflammation caused by the SARS-CoV-2 virus, lipopolysaccharide (LPS) from Escherichia coli, silica particles, nicotine, and coal tar. A CBD-MDI formulation was prepared with 50 mg of CBD in 10 mL for a CBD dose of 250 μg/puff. The formulation ingredients included CBD, absolute ethanol as a cosolvent, and HFA-134a as the propellant. High aerosol performance of CBD-MDI was obtained with mass median aerodynamic diameter of 1.25 ± 0.01 μm, geometric standard deviation of 1.75 ± 0.00, emitted dose of 244.7 ± 2.1 μg, and fine particle dose of 122.0 ± 1.6 μg. The cytotoxicity and anti-inflammatory effectiveness of CBD-MDI were performed in alveolar macrophage (NR8383) and co-culture of alveolar macrophage (NR8383) and human lung adenocarcinoma (A549) cell line. CBD delivered from an MDI was safe on respiratory cells and did not trigger an immune response in alveolar macrophages. CBD-MDI effectively reduced the generation of cytokines in immune cells treated with viral antigen S-RBD, bacterial antigen LPS, silica particles, and coal tar. The efficacy of CBD-MDI was comparable to budesonide. Furthermore, the findings demonstrated that the use of CBD-MDI was more effective in treatment rather than prevention when inflammation was induced by either a viral or bacterial stimulant.

Activity of THC, CBD, and CBN on Human ACE2 and SARS-CoV1/2 Main Protease to Understand Antiviral Defense Mechanism

THC, CBD, and CBN were reported as promising candidates against SARS-CoV2 infection, but the mechanism of action of these three cannabinoids is not understood. This study aims to determine the mechanism of action of THC, CBD, and CBN by selecting two essential targets that directly affect the coronavirus infections as viral main proteases and human angiotensin-converting enzyme2. Tested THC and CBD presented a dual-action action against both selected targets. Only CBD acted as a potent viral main protease inhibitor at the IC₅₀ value of 1.86 ± 0.04 µM and exhibited only moderate activity against human angiotensin-converting enzyme2 at the IC₅₀ value of 14.65 ± 0.47 µM. THC acted as a moderate inhibitor against both viral main protease and human angiotensin-converting enzymes2 at the IC₅₀ value of 16.23 ± 1.71 µM and 11.47 ± 3.60 µM, respectively. Here, we discuss cannabinoid-associated antiviral activity mechanisms based on in silico docking studies and in vitro receptor binding studies.

In Vitro Release, Mucosal Permeation and Deposition of Cannabidiol from Liquisolid Systems: The Influence of Liquid Vehicles

This work investigated the influence of liquid vehicles on the release, mucosal permeation and deposition of cannabidiol (CBD) from liquisolid systems. Various vehicles, including EtOH, nonvolatile low- and semi-polar solvents, and liquid surfactants, were investigated. The CBD solution was converted into free-flowing powder using carrier (microcrystalline cellulose) and coating materials (colloidal silica). A physical mixture of the CBD and carrier–coating materials was prepared as a control. The non-crystalline state of CBD in the liquisolid systems was confirmed using XRD, FTIR and SEM studies. The CBD liquisolid powder prepared with volatile and nonvolatile solvents had a better CBD release performance than the CBD formed as the surfactant-based and control powders. The liquisolid systems provided the CBD permeation flux through porcine esophageal mucosa ranging from 0.68 ± 0.11 to 13.68 ± 0.74 µg·cm⁻²·h⁻¹, with the CBD deposition levels of 0.74 ± 0.04 to 2.62 ± 0.30 μg/mg for the dry mucosa. Diethylene glycol monoethyl ether showed significant CBD permeation enhancement (2.1 folds) without an increase in mucosal deposition, while the surfactants retarded the permeation (6.7–9.0 folds) and deposition (1.5–3.2 folds) significantly. In conclusion, besides the drug release, liquid vehicles significantly influence mucosal permeation and deposition, either enhanced or suppressed, in liquisolid systems. Special attention must be paid to the selection and screening of suitable liquid vehicles for liquisolid systems designed for transmucosal applications.

Enhancement of transdermal permeation of cannabinoids and their pharmacodynamic evaluation in rats

The objective of the present study was to enhance the transdermal permeation of cannabinoids: cannabidiol (CBD), cannabigerol (CBG) and tetrahydrocannabivarin (THCV) using chemical permeation enhancer approach and evaluate them for their anti-inflammatory effect in vivo in a paw edema model in rats. Cannabinoids gel formulations were developed using FDA approved inactive ingredients: lactic acid (LA), polyethylene glycol-400 (PEG-400), N-methyl-2 pyrrolidone (NMP), dimethyl sulfoxide (DMSO). In vitro skin permeation testing (IVPT) showed flux of ∼ 13.25 μg/cm²/h for CBD, ∼9.38 μg/cm²/h for CBG and ∼ 51.74 μg/cm²/h for THCV. Additionally, IVPT study showed cumulative drug permeation of 610.96 ± 88.92 μg/cm², 432.09 ± 35.59 μg/cm² and 2384.44 ± 42.22 μg/cm² from CBD, CBG and THCV gel formulations respectively. Further, effect of excipients on cannabinoid permeation showed that, formulation containing lactic acid, NMP and DMSO showed significantly (p < 0.0001) enhanced flux of cannabinoids as compared to formulation without LA, NMP and DMSO. In vivo studies showed that paw edema was significantly (p < 0.0001) reduced in the groups containing CBD, CBG, THCV as compared to control and placebo formulation. In conclusion, flux of CBD, CBG and THCV was significantly enhanced using chemical permeation enhancers approach which helped in reducing rat paw edema.

Effect of Lipid Vehicles on Solubility, Stability, and Topical Permeation of Delta-9-Tetrahydrocannabinol

Delta-9-tetrahydrocannabinol (THC) is one of the most effective antinociceptive agents used in the treatment of peripheral neuropathy. THC is highly lipophilic and susceptible to thermal and oxidative degradation. Identifying appropriate solvents in which THC is stable as well as adequately solubilized is crucial in developing topical dosage forms. Lipid solvent systems are of utmost utility and relevance for formulating highly lipophilic drugs. Hence, the objective of this project was to screen the solubility of THC in lipidic excipients, monitor THC content in the selected vehicles during stability, and study the influence of these excipients on permeation of THC across skin. The solubility of THC in liquid lipid excipients was in the range of 421 to 500 mg/g. The solubility of THC in solid lipid excipients was in the range of 250 to 750 mg/g. THC in its neat form was poorly stable, but when dissolved in lipid-based excipients, its stability improved significantly. THC in lipid excipients was more stable at 4 ± 3°C compared to samples stored at 25 ± 2°C. The antioxidants (butylated hydroxytoluene and ascorbyl palmitate) used in the excipients further improved the stability of THC. The results demonstrated that the liquid and solid lipid excipients used in the study could solubilize THC freely and mitigate the degradation of THC significantly. The binary combination of lipid excipients enhanced THC skin permeation and retention, demonstrating the potential for topical formulation development of THC.

Extraction of Bioactive Compounds From Cannabis sativa L. Flowers and/or Leaves Using Deep Eutectic Solvents

The increasing demand for medical cannabis urges the development of new and effective methods for the extraction of phytocannabinoids. Deep eutectic solvents (DESs) are an alternative to the use of hazardous organic solvents typically used in the industry. In this study, hydrophilic and hydrophobic DESs were developed based on terpenes, sugars, and natural organic acids as green extraction media for the extraction of cannabis bioactive compounds. The factors influencing the extraction of bioactive components, such as the type of DESs and extraction time, were investigated. Initial screening in hemp showed that the DES composed of Men: Lau (a 2:1-M ratio) had a greater extraction efficiency of cannabidiol (CBD) and cannabidiolic acid (CBDA) (11.07 ± 0.37 mg/g) of all the tested DESs and higher than ethanol. Besides having a higher or equivalent extraction yield as the organic solvents tested, DESs showed to be more selective, extracting fewer impurities, such as chlorophyll and waxes. These results, coupled with the non-toxic, biodegradable, low-cost, and environmentally friendly characteristics of DESs, provide strong evidence that DESs represent a better alternative to organic solvents.

Biophysical Studies and In Vitro Effects of Tumor Cell Lines of Cannabidiol and Its Cyclodextrin Inclusion Complexes

Phytocannabinoids possess anticancer properties, as established in vitro and in vivo. However, they are characterized by high lipophilicity. To improve the properties of cannabidiol (CBD), such as solubility, stability, and bioavailability, CBD inclusion complexes with cyclodextrins (CDs) might be employed, offering targeted, faster, and prolonged CBD release. The aim of the present study is to investigate the in vitro effects of CBD and its inclusion complexes in randomly methylated β-CD (RM-β-CD) and 2-hyroxypropyl-β-CD (HP-β-CD). The enhanced solubility of CBD upon complexation with CDs was examined by phase solubility study, and the structure of the inclusion complexes of CBD in 2,6-di-O-methyl-β-CD (DM-β-CD) and 2,3,6-tri-O-methyl-β-CD (TM-β-CD) was determined by X-ray crystallography. The structural investigation was complemented by molecular dynamics simulations. The cytotoxicity of CBD and its complexes with RM-β-CD and HP-β-CD was tested on two cell lines, the A172 glioblastoma and TE671 rhabdomyosarcoma cell lines. Methylated β-CDs exhibited the best inclusion ability for CBD. A dose-dependent effect of CBD on both cancer cell lines and improved efficacy of the CBD–CDs complexes were verified. Thus, cannabinoids may be considered in future clinical trials beyond their palliative use as possible inhibitors of cancer growth.

The Transdermal Delivery of Therapeutic Cannabinoids

Recently, several studies have indicated an increased interest in the scientific community regarding the application of Cannabis sativa plants, and their extracts, for medicinal purposes. This plant of enormous medicinal potential has been legalised in an increasing number of countries globally. Due to the recent changes in therapeutic and recreational legislation, cannabis and cannabinoids are now frequently permitted for use in clinical settings. However, with their highly lipophilic features and very low aqueous solubility, cannabinoids are prone to degradation, specifically in solution, as they are light-, temperature-, and auto-oxidation-sensitive. Thus, plant-derived cannabinoids have been developed for oral, nasal-inhalation, intranasal, mucosal (sublingual and buccal), transcutaneous (transdermal), local (topical), and parenteral deliveries. Among these administrations routes, topical and transdermal products usually have a higher bioavailability rate with a prolonged steady-state plasma concentration. Additionally, these administrations have the potential to eliminate the psychotropic impacts of the drug by its diffusion into a nonreactive, dead stratum corneum. This modality avoids oral administration and, thus, the first-pass metabolism, leading to constant cannabinoid plasma levels. This review article investigates the practicality of delivering therapeutic cannabinoids via skin in accordance with existing literature.

A Comprehensive Review on the Techniques for Extraction of Bioactive Compounds from Medicinal Cannabis

Cannabis is well-known for its numerous therapeutic activities, as demonstrated in pre-clinical and clinical studies primarily due to its bioactive compounds. The Cannabis industry is rapidly growing; therefore, product development and extraction methods have become crucial aspects of Cannabis research. The evaluation of the current extraction methods implemented in the Cannabis industry and scientific literature to produce consistent, reliable, and potent medicinal Cannabis extracts is prudent. Furthermore, these processes must be subjected to higher levels of scientific stringency, as Cannabis has been increasingly used for various ailments, and the Cannabis industry is receiving acceptance in different countries. We comprehensively analysed the current literature and drew a critical summary of the extraction methods implemented thus far to recover bioactive compounds from medicinal Cannabis. Moreover, this review outlines the major bioactive compounds in Cannabis, discusses critical factors affecting extraction yields, and proposes future considerations for the effective extraction of bioactive compounds from Cannabis. Overall, research on medicinal marijuana is limited, with most reports on the industrial hemp variety of Cannabis or pure isolates. We also propose the development of sustainable Cannabis extraction methods through the implementation of mathematical prediction models in future studies.

Cannabidiol/hydroxypropyl-β-cyclodextrin inclusion complex: structure analysis, release behavior, permeability, and bioactivity under in vitro digestion

The inclusion complex of CBD greatly improved its release performance and bioactivity.

Development and pharmacokinetic evaluation of a self-nanoemulsifying drug delivery system for the oral delivery of cannabidiol

The number of lipophilic drug candidates in pharmaceutical discovery pipelines has increased in recent years. These drugs often possess physicochemical properties that result in poor oral bioavailability, and their clinical potential may be limited without adequate formulation strategies. Cannabidiol (CBD) is an excellent example of a highly lipophilic compound with poor oral bioavailability, due to low water solubility and extensive first-pass metabolism. An approach that may overcome these limitations is formulation of the drug in self-nanoemulsifying drug delivery systems (SNEDDS). Herein, CBD-SNEDDS formulations were prepared and evaluated in vitro. Promising formulations (F2, F4) were administered to healthy female Sprague-Dawley rats via oral gavage (20 mg/kg CBD). Resulting pharmacokinetic parameters of CBD were compared to those obtained following administration of CBD in two oil-based formulations: a medium-chain triglyceride oil vehicle (MCT-CBD), and a sesame oil-based formulation similar in composition to an FDA-approved formulation of CBD, Epidiolex® (SO-CBD). Compared to MCT-CBD, administration of the SNEDDS formulations led to more rapid absorption of CBD (median T_max values: 0.5 h (F2), 1 h (F4), 6 h (MCT-CBD)). Administration of F2 and F4 formulations also improved the systemic exposure to CBD by 2.2 and 2.8-fold compared to MCT-CBD; however, no improvement was found compared to SO-CBD.

Influence of API physico-chemical properties on amorphization capacity of several mesoporous silica loading methods

The objective of this work was to evaluate the impact of physico-chemical properties of pharmaceutical drugs on the optimal mesoporous silica loading methods. Indeed, a good combination between drug and loading process has to be studied to promote the deepest penetration of the drug inside the mesopores, allowing high drug amorphization. Six molecules, namely lidocaine and its hydrochloride, ibuprofen, ketoprofen, artemether and miconazole, with different physico-chemical properties (the ionized character, the acid-base character, the HBDA number, the solubility in sc-CO₂ and the behavior under subcritical CO₂) were used to produce drug-silica formulations. Different impregnation processes (physical mixing, melting, wetting, sc-CO₂ and subcritical CO₂ impregnations) have been compared for each drug, in terms of drug recovery and crystallinity. Formulations showed drug percentage close to 100% except for supercritical soluble drug formulations impregnated by using sc-CO₂. However, the basic drug character provided less or no drug loss during impregnation. Processing insoluble sc-CO₂ molecule under supercritical conditions led to less crystallinity than the correspondent physical mixture suggesting an interesting repulsive effect that forces the drug penetration within the mesopores. Besides, it has been also highlighted that the HBDA number is not sufficient to predict the final drug loading. Melting methods have high interest considering the drugs tested and subcritical CO₂ could increase the loading, especially for drugs with high molten viscosity. This study showed that a plethora of loading methods can be used to provide high drug loaded MS formulations with a wide choice of equipment.

Application of a liquisolid technique to cannabis sativa extract compacts: Effect of liquid vehicles on the dissolution enhancement and stability of cannabinoids

This work describes the application of liquisolid technique to enhance cannabinoid dissolution from Cannabis sativa L. (CS) compacts. Effects of five vehicles, namely, volatile (ethanol) and nonvolatile (caprylocaproyl macrogolglycerides, polyethylene glycol 400, oleoyl macrogolglycerides and polysorbate 20) liquids, on tablet properties, dissolution and stability were investigated. The viscid oleoresin CS extract was mixed with vehicles before being transformed into free-flowing powder by the use of microcrystalline cellulose and colloidal silica as carrier and coating materials. Liquid vehicles had a nonsignificant effect on liquid load factor of CS extract. CS liquisolid compacts had acceptable tableting properties in terms of weight variation, friability, hardness, content uniformity and disintegration time. Different vehicles affected the hardness, disintegration, and wettability of CS compacts and thus the dissolution behaviors of cannabinoids to different extents. Dissolutions of cannabinoids from CS compacts were rate-limited by the disintegration process. Liquisolid formulations using nonvolatile liquids with low polarity or high hydrophilic-lipophilic balance yielded more than 90% cannabinoid dissolution. Stability studies revealed nonsignificant changes in tablet characteristics, cannabinoid content and dissolutions of CS compacts when stored at 5 ± 3 °C for 3 months. This work presents a general concept of how to successfully formulate CS extract with cannabinoid dissolution enhancement characteristics.