Applications of nanotechnology in smart textile industry: A critical review

Atomic layer deposition on flexible polymeric materials for lithium-ion batteries

Polymers have the distinctive qualities of being lightweight, flexible, and inexpensive and possessing good mechanical qualities. Consequently, these materials are employed in a wide range of applications, including lithium-ion batteries (LiBs). Interestingly, a variety of thin film materials can be deposited onto polymer substrates using the atomic layer deposition (ALD) technique. This is because the surface of many polymers has abundant reactive sites that are essential for the initial growth of ALD, such as functional hydroxyl -OH groups and -C[double bond, length as m-dash]O polar groups, aiding the smooth growth of ALD materials. Moreover, the diffusion growth mechanism, which is initiated by the nucleation and infiltration of precursors, can enable the initial growth of ALD materials even if the polymers lack these reactive polar groups. As polymers are composed of several chains, they have microporous characteristics, forming voids between the polymer chains. Because of these characteristics, polymers are considered ideal material substrates for investigating the promising future of the widely used ALD technique. The combination of polymer materials and the ALD method is becoming increasingly important in the advancements of high-performance LiBs. This review focuses on the present understanding of the role of polymer materials in the ALD technique for the fabrication of lithium-ion batteries.

Nanotechnology Innovations in Myocardial Infarction: Diagnosis, Treatment and the Way Forward

Myocardial infarction (MI) is a global health concern that necessitates continued advancements in diagnostic and therapeutic modalities. Nanotechnology facilitates prompt diagnosis and personalized treatment. This manuscript explicitly reviews the application of innovative methodologies for identifying cardiac biomarkers to facilitate the early diagnosis of MI and its clinical management. Nanoscale agents such as nanoparticles and nanosensors have been employed for this purpose. Technological advancements in medical imaging are revolutionizing therapeutic approaches while reducing morbidity and mortality typically associated with cardiac tissue injury. Besides all, applications of nanotechnology in therapeutics have proven extremely effective. The development of nanoparticle-based customized drug delivery systems will contribute to more effective treatments, fewer side effects, and improved therapeutic outcomes. Biomaterials and nanoscale surgical technologies may benefit patients with MI by promoting tissue regeneration and repair. This manuscript also investigates the ethical and legal limitations that could prevent seamless incorporation of nanotechnology into clinical practice.

Atomic layer deposition paves the way for next-generation smart and functional textiles

As technology evolves and consumer needs diversify, textiles have become crucial to determining the future of fashion, sustainability, and functionality. Functional textiles, which not only provide comfort and aesthetics as traditional textiles but also endow textiles with special functions such as antibacterial, anti-odor, moisture absorption and perspiration, anti-ultraviolet (UV), flame-retardant, self-cleaning, and anti-static properties through technological innovation and upgrading, have attracted increasing attention because they satisfy the specific needs of people in different environments and occasions. However, functionality often occurs at the expense of comfort in existing functional products. Endowing textiles with excellent multi-functionality with marginal effects on comfort and wearability properties continues to be a challenge. Atomic layer deposition (ALD) paves the way for creating functional fabrics by enabling the formation of highly conforming inorganic/organic coatings over a large area with precise atomic-level film thickness control from a self-limiting reaction mechanism. Therefore, this paper introduces the reaction mechanism of ALD and the unique advantages of depositing inorganic nanofilms on fiber and textile surfaces. The factors influencing ALD and the commonly used ALD-derived technologies are then discussed. Subsequently, the research progress and breakthroughs in inorganic nanofilms prepared by ALD in conferring multifunctional properties on textile surfaces, such as antimicrobial, UV-resistant, heat-insulating, multifunctional wetting, structural coloring, thermoelectric elements, and flexible sensing, are reviewed. Finally, future developments and possible challenges of ALD for the large-scale production of multifunctional fabrics are proposed, which are expected to promote the development of next-generation advanced functional textiles.

Trends and Advances in Wearable Plasmonic Sensors Utilizing Surface-Enhanced Raman Spectroscopy (SERS): A Comprehensive Review

Wearable sensors have appeared as a promising solution for real-time, non-invasive monitoring in diverse fields, including healthcare, environmental sensing, and wearable electronics. Surface-enhanced Raman spectroscopy (SERS)-based sensors leverage the unique properties of SERS, such as plasmonic signal enhancement, high molecular specificity, and the potential for single-molecule detection, to detect and identify a wide range of analytes with ultra-high sensitivity and molecular selectivity. However, it is important to note that wearable sensors utilize various sensing mechanisms, and not all rely on SERS technology, as their design depends on the specific application. This comprehensive review highlights the recent trends and advancements in wearable plasmonic sensing technologies, focusing on their design, fabrication, and integration into practical wearable devices. Key innovations in material selection, such as the use of nanomaterials and flexible substrates, have significantly enhanced sensor performance and wearability. Moreover, we discuss challenges such as miniaturization, power consumption, and long-term stability, along with potential solutions to address these issues. Finally, the outlook for wearable plasmonic sensing technologies is presented, emphasizing the need for interdisciplinary research to drive the next generation of smart wearables capable of real-time health diagnostics, environmental monitoring, and beyond.

Surface Treatment of Polyamide 6 through Enzymatic Hydrolysis and Covalent Incorporation of Chitosan Nanoparticles

Polyamide (PA) has notable physical and chemical properties and is one of the most versatile synthetic materials in the industrial sector. However, its hydrophobicity creates significant challenges in its beneficiation and modification. Modifications of PA with chitosan nanoparticles (CNPs) can improve its undesired properties but are rarely found in the literature due to the weak interaction between the chemical groups of both structures. Surface hydrolysis mediated by enzymes can mildly improve the PA properties and create reactive sites. These sites can react with CNPs to confer enhanced properties to the fabrics, such as antimicrobial activity and flame retardancy. This study investigated the action of 14 hydrolases in the surface hydrolysis of 100% polyamide 6 (PA 6) fabric. Such an extensive study applying several enzymes for this process is uncommon. Under the optimum conditions, the hydrolyzed fabric was covalently bonded to the CNPs, generating material with reduced bacterial proliferation and flame retardancy properties. The uncommon covalent bond attachment achieved high material durability, even after five washing cycles.

Sub-Nanoscale Caffeic Acid-Functionalized TiO2 Composite: Enhancing Mechanical Properties and Odontogenic Differentiation Capacity of Resin-Based Dental Restoration

Resin-based materials (RBMs) are widely applied in dentistry because they withstand the recurrent multi-dimensional force striking and the hydrolysis of teeth. Sub-nanoscale materials can enhance the mechanical strength and bioactivity of RBMs, but the effects are still limited and the mechanisms to enhance bioactivity remain unclear. Here, a TiO2-based sub-nanocomposite modified with caffeic acid (CA) to enhance mechanical robustness, structural stability, and bioactivity of RBMs is reported. This sub-nanocomposite can promote the proliferation, adhesion, and odontogenic differentiation of human dental pulp stem cells (hDPSCs) through specifically up-regulating the expression of genes related to cell-matrix adhesion, integrin-mediated signaling pathways, and collagen fibril organization. These effects lead to a better capacity for up-regulating odontogenic differentiation of RBMs.

Green Advances in Wet Finishing Methods and Nanoparticles for Daily Textiles

This work presented an overview of greener technologies for realizing everyday fabrics with enhanced antibacterial activity, flame retardancy, water repellency, and UV protection. Traditional methods for improving these qualities in textiles involved dangerous chemicals, energy and water-intensive procedures, harmful emissions. New strategies are presented in response to the current emphasis on process and product sustainability. Nanoparticles (NPs) are suggested as a potential alternative for hazardous components in textile finishing. NPs are found to efficiently decrease virus transmission, limit combustion events, protect against UV radiation, and prevent water from entering, through a variety of mechanisms. Some attempts are made to increase NPs efficiency and promote long-term adherence to textile surfaces. Traditional wet finishing methods are implemented through a combination of advanced green technologies (plasma pre-treatment, ultrasound irradiations, sol-gel, and layer-by-layer self-assembly methods). The fibrous surface is activated by adding functional groups that facilitate NPs grafting on the textile substrate by basic interactions (chemical, physical, or electrostatic), also indirectly via crosslinkers, ligands, or coupling agents. Finally, other green options explore the use of NPs synthesized from bio-based materials or hybrid combinations, as well as inorganic NPs from green synthesis to realize ecofriendly finishing able to provide durable and protective fabrics.

A roadmap towards safe and sustainable by design nanotechnology: Implementation for nano-silver-based antimicrobial textile coatings production by ASINA project

This report demonstrates a case study within the ASINA project, aimed at instantiating a roadmap with quantitative metrics for Safe(r) and (more) Sustainable by Design (SSbD) options. We begin with a description of ASINA's methodology across the product lifecycle, outlining the quantitative elements within: Physical-Chemical Features (PCFs), Key Decision Factors (KDFs), and Key Performance Indicators (KPIs). Subsequently, we delve in a proposed decision support tool for implementing the SSbD objectives across various dimensions-functionality, cost, environment, and human health safety-within a broader European context. We then provide an overview of the technical processes involved, including design rationales, experimental procedures, and tools/models developed within ASINA in delivering nano-silver-based antimicrobial textile coatings. The result is pragmatic, actionable metrics intended to be estimated and assessed in future SSbD applications and to be adopted in a common SSbD roadmap aligned with the EU's Green Deal objectives. The methodological approach is transparently and thoroughly described to inform similar projects through the integration of KPIs into SSbD and foster data-driven decision-making. Specific results and project data are beyond this work's scope, which is to demonstrate the ASINA roadmap and thus foster SSbD-oriented innovation in nanotechnology.

Semi-supervised Federated Learning for Digital Twin 6G-enabled IIoT: A Bayesian estimated approach

INTRODUCTION

In recent years, the proliferation of Industrial Internet of Things (IIoT) devices has resulted in a substantial increase in data generation across various domains, including the nascent 6G networks. Digital Twins (DTs), serving as virtual replicas of physical entities, have gained popularity within the realm of IoT due to their capacity to simulate and optimize physical systems in a cost-effective manner. Nonetheless, the security of DTs and the safeguarding of the sensitive data they generate have emerged as paramount concerns. Fortunately, the Federated Fearning (FL) system has emerged as a promising solution to address the challenge of data privacy within DTs. Nonetheless, the requisite acquisition of a significant volume of labeled data for training purposes poses a formidable challenge, particularly in a DT environment that blends real and virtual data.

OBJECTIVES

To tackle this challenge, this study presents an innovative Semi-supervised FL (SSFL) framework designed to overcome the scarcity of labeled data through the strategic utilization of pseudo-labels.

METHODS

Specifically, our proposed SSFL algorithm, named SSFL-MBE, introduces a novel approach by combining Mix data augmentation and Bayesian Estimation consistency regularization loss, thereby integrating robust augmentation techniques to enhance model generalization. Furthermore, we introduce a Bayesian-estimated pseudo-label loss that leverages prior probabilistic knowledge to enhance model performance. Our investigation focuses particularly on a demanding scenario where labeled and unlabeled data are segregated across disparate locations, specifically, the server and various clients.

RESULTS

Comprehensive evaluations conducted on CIFAR-10 and MNIST datasets conclusively demonstrate that our proposed algorithm consistently surpasses mainstream SSFL baseline models, exhibiting an enhancement in model performance ranging from 0.5% to 1.5%.

CONCLUSION

Overall, this work contributes to the development of more efficient and secure approaches for model training in DT-empowered FL settings, which is crucial for the deployment of IIoTs in 6G-enabled environments.

Realizing the Potential of Commercial E-Textiles for Wearable Glucose Biosensing Application

Advancements in wearable technology have enabled noninvasive health monitoring using biosensors. This research focuses on developing a textile-based sweat glucose sensor using commercially available conductive textiles, evading the complexity of traditional fabrication methods. A comparative analysis of three low-cost conductive textiles, Adafruit 1364, 1167, and 4762, has been conducted for electrochemical glucose detection with glucose-specific enzymes such as glucose oxidase (GOx) and glucose dehydrogenase (GDH). Adafruit 1364 outperformed others in morphological, electrochemical, and wearable properties. Cyclic voltammetry shows that Adafruit 1364 and 4762 effectively detect glucose at the potential of 0.23 and 0.08 V using glucose oxidase and 0.1 and 0.08 V using glucose dehydrogenase enzymes, respectively. Furthermore, chronoamperometry has been conducted to confirm the presence of glucose at 1 μM concentration. Differential pulse voltammetry was conducted to assess the sensitivity of the Adafruit 1364 fabric electrode using glucose solutions with concentrations of 0.05, 0.15, 0.25, and 0.5 mM. The electrode immobilized with GOx showed a sensitivity of 0.005 μA μM-1 and a limit of detection (LOD) of 41.3 μM, while the electrode immobilized with GDH exhibited a sensitivity of 0.0019 μA μM-1 and an LOD of 63.1 μM. The study also highlighted the reproducibility, effect of interferents, and advantageous wearable properties of these sensors.

Thermo-Chemo-Mechanically Robust, Multifunctional MXene/PVA/PAA-Hanji Textile with Energy Harvesting, EMI Shielding, Flame-Retardant, and Joule Heating Capabilities

The rapid development of wearable electronics, personal mobile equipment, and Internet of Things systems demands smart textiles that integrate multiple functions with enhanced durability. Herein, the study reports robust and multifunctional textiles with energy harvesting, electromagnetic interference (EMI) shielding, flame resistance, and Joule heating capabilities, fabricated by a facile yet effective integration method using the deposition of cross-linked MXene (Ti3C2Tx), poly(vinyl alcohol) (PVA), and poly(acrylic acid) (PAA) onto traditional Korean paper, Hanji via vacuum filtration. Comprehensive analyses confirm robust cross-linking, structural integrity, and interface stability in the MXene/PVA/PAA-Hanji (MPP-H) textiles, which synergistically boost their multifunctional performance. The MPP-H textiles exhibit remarkable power generation lasting over 60 min with a power density of 102.2 µW cm-3 and an energy density of 31.0 mWh cm-3 upon the application of 20 µL of NaCl solution. The EMI shielding effectiveness (SE) per unit thickness in the X-band (8.2-12.4 GHz) is up to 437.6 dB mm-1, with the ratio of absorption to reflection reaching 4.5, outperforming existing EMI shielding materials. Superior thermo-chemo-mechanical properties (flame resistance, rapid Joule heating, durability, and washability) further demonstrate their versatile usability. The MPP-H enables diverse functionalities within a single, robust textile through a scalable fabrication method, offering transformative potential for wearable and mobility platforms.

Scalable Production of Functional Fibers with Nanoscale Features for Smart Textiles

Functional fibers, retaining nanoscale characteristics or nanomaterial properties, represent a significant advance in nanotechnology. Notably, the combination of scalable manufacturing with cutting-edge nanotechnology further expands their utility across numerous disciplines. Manufacturing kilometer-scale functional fibers with nanoscale properties are critical to the evolution of smart textiles, wearable electronics, and beyond. This review discusses their design principles, manufacturing technologies, and key advancements in the mass production of such fibers. In addition, it summarizes the current applications and state of progress in scalable fiber technologies and provides guidance for future advances in multifunctional smart textiles, by highlighting the upcoming impending demands for evolving nanotechnology. Challenges and directions requiring sustained effort are also discussed, including material selection, device design, large-scale manufacturing, and multifunctional integration. With advances in functional fibers and nanotechnology in large-scale production, wearable electronics, and smart textiles could potentially enhance human-machine interaction and healthcare applications.

Exposure assessment and risks associated with wearing silver nanoparticle-coated textiles

Background

Silver (Ag) nanoparticles (NPs) are used increasingly in consumer and healthcare fabrics due to their antimicrobial properties. Abrasive leaching experiments have shown that AgNPs can be released during textile wear and cause a dermal exposure. Derived-no-effect-limit value for AgNPs ranges from 0.01 to 0.0375 mg/kg-body-weight, and thus, low exposures levels can cause relevant risk.

Methods

In this study AgNP release from textiles by artificial sweat immersion and mechanical stress was investigated. A mass balance model was used to calculate dermal Ag exposure and potential intake via percutaneous absorption and inadvertent (peri-)oral intake during wear of face mask, suit with a full body exposure and gloves. Mass flow analysis was performed for up to 8-h wear time and by using Ag penetration rate constants reported for fresh-, cryopreserved- and glycerolized skin grafts.

Results

Dermal intake risk characterization ratio (RCR) during 8-h wear time for glycerolized skin was up to 0.02 for face mask and 0.9 for full body wear in a worst-case condition. Wearing gloves for 1-h followed by single unintentional fingertip mouthing (contact area 11.5 cm 2) resulted in an RCR of 0.0002. RCR varied depending on the type of textile-product, exposure wear duration and skin type.

Conclusions

This study provides a comprehensive assessment of AgNPs release from textiles and their potential impact on human dermal exposure and was essential for understanding the safety implications for different exposure scenarios and mitigating potential risks.

ZnO Nanoparticles Enhance the Antimicrobial Properties of Two-Sided-Coated Cotton Textile

Cotton textiles improved with metal oxide nanoparticles acquire additional features that may enhance their action against antimicrobial-resistant pathogens due to the unique properties and characteristics of the nanoparticles. The main objective of this work is to evaluate the antimicrobial features of two-sided-coated cotton textiles with ZnO nanoparticles. Nanoparticles were deposited using green chemistry technology with low-temperature oxygen plasma. ZnO particles formed stable structures on textile fibers. The optimal deposition parameters (150 W plasma power, 120 min immersion time) achieved the best effects against Gram-negative and Gram-positive bacteria and microscopic fungi. Two-sided-coated cotton with ZnO nanoparticles showed high antibacterial action on Gram-negative and Gram-positive bacteria. Modification with zinc oxide inhibited the growth of Candida albicans by more than half.

Low toxicity of magnetite-based modified bionanocomposites with potential application for wastewater treatment: Evaluation in a zebrafish animal model

In recent years, the escalating concerns surrounding environmental pollution and the need for sustainable wastewater treatment solutions have underscored the significance of developing technologies that can efficiently treat wastewater while also reducing negative ecological effects. In this context, our study aims to contribute to the advancement of sustainable technologies for wastewater treatment, by investigating the effects that bare magnetite nanoparticles and those functionalized with the enzyme laccase could have in an aquatic animal, zebrafish, at various life cycle stages. Exposure to magnetite nanoparticles shows some effects on embryo hatching, survival rates, or larval behavior at higher concentrations. For both treatments, the hatching percentages were close to 80% compared to 93% for the control group. At the end of the observations in larvae, survival in all the evaluated groups was higher than 90%. Additionally, we evaluated the accumulation of nanoparticles in various stages of zebrafish. We found that, although there was accumulation during embryonic stages, it did not affect normal development or subsequent hatching. Iron levels in different organs such as gills, muscles, gastrointestinal tract, and brain were also evaluated in adults. Animals treated with a mix of food and nanoparticles at 10 μg/mL (Food group) presented a higher concentration of iron accumulation in muscle, gastrointestinal tract, and gills compared to the untreated control group. Although iron levels increased depending on the dose and exposure method applied, they were not statistically significant from the control groups. Our findings suggest that bionanocomposites evaluated here can be considered safe for removal of contaminants in wastewater without toxic effects or detrimental accumulation fish's health.

Nanomaterials for Potential Uses in Extraterrestrial Environments

Over the past decades, the development of nanomaterials has played an important role in the most intriguing aspects of new technologies in several scientific fields, such as nanoelectronics, nanomedicine [...].

Surface modification of jute-cotton union fabric using TiO2 and ZnO nanoparticles for multifunctional properties

In this study TiO2 and ZnO nanoparticles were employed as a protective coating to impart multifunctional properties, i.e. self-cleaning, water repellency, UV protection and antimicrobial activity onto jute-cotton union fabric. Through the sol-gel method, using titanium (IV) isopropoxide (TTIP) and zinc acetate as precursors, TiO2 and ZnO nanoparticles have been synthesized. Following the dip-pad-dry-cure method along with a 2 wt% of acrylic binder, the synthesized particles were applied on the jute-cotton union fabric. Subsequently, antibacterial activity, self-cleaning properties and physical properties like water absorbency, crease recovery, water vapor permeability, tensile strength, and tear strength of the treated fabric were tested and evaluated. The structural properties of the nano-particles were distinguished by Fourier Transform Infrared Spectroscopy (FTIR) and SEM. Upon comparing the test results of the coated fabric with the uncoated fabric, the results were found to be extremely satisfactory. This study provided valuable insights into the potential of TiO2 and ZnO coating in enhancing properties of jute-cotton union fabric.

Development and characterization of smart composites reinforced with fibrillated cellulose and nickel-titanium alloy

The current study presents the synergistic effects of fibrillated cellulose (FC) and nickel-titanium (NiTi) alloy on the performance properties of smart composites. Epoxy resin was reinforced with loadings of 1 %, 3 %, and 5 % FC and 3 % NiTi. The composites were produced using the casting method. The morphological properties have been analyzed using scanning electron microscopy (SEM). For mechanical properties, yield strength, modulus of elasticity, hardness, and impact energy were determined. The corrosion rate was determined via electrochemical corrosion testing. The recovery test was used to measure the shape-memory of the composites. The self-healing of the artificial defect in the composites was observed using a thermal camera. The yield strength, modulus of elasticity, hardness, and impact energy of composites reinforced with 5 % FC and 3 % NiTi increased by 168.2 %, 290 %, 33.3 %, and 114.3 %, respectively, compared to pure epoxy resin. There has been a 56.3 % decrease in the corrosion rate. The percentage of composites that returned from the final state to the original state after a deformation was 4 %. Self-healing analysis revealed that the scratch defect in composites was healed after 24 h. It is concluded that smart composites can be used in the aviation and automotive industries.

Polypyrrole-wool composite with electrical heating properties fabricated via layer-by-layer method

This study presents the development of conductive polymer-textile composites with outstanding electric heating properties achieved through the in-situ polymerization of polypyrrole on wool-felt fabrics, renowned for their superior thermal insulation. Employing successive layer-by-layer (LBL) cycles facilitated precise control over the uniform deposition of polypyrrole with the fabrics. The investigation focused on the interaction between wool fiber and polypyrrole, evaluating appearance, add-on, and electrical heating performance with varying LBL cycles. The polymerization process resulted in the formation of spherical polypyrrole particles on the wool-felt, with deposition increasing alongside LBL cycle numbers. Mechanical properties, including tensile strength and bending rigidity, exhibited enhancement with polypyrrole deposition, while strain reduction was noted, with minimal influence from LBL cycles. Electrical properties, particularly surface resistance, displayed a rapid decrease up to the second LBL cycle. Concerning electrical heating performance, the application of a 12 V voltage resulted in a linear increase in surface temperature with increasing LBL cycles, peaking at 15.5 ℃. Notably, this sustained electrical heating effect persisted even after voltage removal, attributed to the low thermal conductivity of wool fiber. Moreover, the polypyrrole conductive layer maintained exceptional conductivity following repeated abrasion and washing, credited to improved uniformity through LBL cycles. The synergy of wool's insulating properties and polypyrrole's conductivity, as confirmed in this study, presents the potential for a highly efficient heating fabric. These developed materials exhibited improved heating performance, energy conservation, and minimal change in mechanical properties, making them suitable for applications such as electrical heating smart clothing.

Electrospun cellulose nanofibers immobilized with anthocyanin extract for colorimetric determination of bacteria

A novel smart biochromic textile sensor was developed by immobilizing anthocyanin extract into electrospun cellulose acetate nanofibers to detect bacteria for numerous potential uses, such as healthcare monitoring. Red-cabbage was employed to extract anthocyanin, which was then applied to cellulose acetate nanofibers treated with potassium aluminum sulfate as a mordant. Thus, nanoparticles (NPs) of mordant/anthocyanin (65-115 nm) were generated in situ on the surface of cellulose acetate nanofibrous film. The pH of a growing bacterial culture medium is known to change when bacteria multiply. The absorbance spectra revealed a bluish shift from 595 nm (purple) to 448 nm (green) during the growth of Gram-negative bacteria (E. coli) owing to the discharge of total volatile basic amines as secretion metabolites. On the other hand, the absorption spectra of a growing bacterial culture containing Gram-positive bacteria (L. acidophilus) showed a blue shift from 595 nm (purplish) to 478 nm (pink) as a result of releasing lactic acid as a secretion metabolite. Both absorbance spectra and CIE Lab parameters were used to determine the color shifts. Various analytical techniques were utilized to study the morphology of the anthocyanin-encapsulated electrospun cellulose nanofibers. The cytotoxic effects of the colored cellulose acetate nanofibers were tested.

Dielectric Barrier Discharge Plasma Processing and Sr-Doped ZnO/CNT Photocatalyst Decoration of Cotton Fabrics for Self-Cleaning Application

Nonthermal plasma processing is a chemical-free and environmentally friendly technique to enhance the self-cleaning activity of nanoparticle-coated cotton fabrics. In this research, Sr-doped ZnO/carbon nanotube (CNT) photocatalysts, namely, S10ZC2, S15ZC2, and S20ZC2 with different Sr doping concentrations, were synthesized using the sol-gel method and coated on plasma-functionalized fabric to perform the self-cleaning tests. The fabrics were treated with dielectric barrier discharge plasma in an open environment for 3 min to achieve a stable coating of nanoparticles. The energy band gap of the photocatalyst decreased with an increase in the level of Sr doping. The band gap of S10ZC2, S15ZC2, and S20ZC2 photocatalysts was estimated to be 2.85, 2.78, and 2.5 eV, respectively. The hexagonal wurtzite structure of ZnO was observed on the fabric surface composited with CNTs and Sr. The S20ZC2 photocatalyst showed better homogeneity and photocatalytic response on the fabric when compared with S10ZC2- and S15ZC2-coated fabrics. The S20ZC2 photocatalyst showed 89% dye degradation efficiency after 4 h of light exposure in methylene blue solution, followed by S15ZC2 (84%) and S10ZC2 (80%) photocatalysts.

Synthesis and characterization of titanium dioxide nanoparticles from Bacillus subtilis MTCC 8322 and its application for the removal of methylene blue and orange G dyes under UV light and visible light

Over the last decade there has been a huge increase in the green synthesis of nanoparticles. Moreover, there is a continuous increase in harnessing the potential of microorganisms for the development of efficient and biocompatible nanoparticles around the globe. In the present research work, investigators have synthesized TiO2 NPs by harnessing the potential of Bacillus subtilis MTCC 8322 (Gram-positive) bacteria. The formation and confirmation of the TiO2 NPs synthesized by bacteria were carried out by using UV-Vis spectroscopy, Fourier transforms infrared (FT-IR), X-ray diffraction (XRD), scanning electron microscope (SEM), and energy dispersive X-ray spectroscopy (EDX/EDS). The size of the synthesized TiO2 NPs was 80-120 nm which was spherical to irregular in shape as revealed by SEM. FTIR showed the characteristic bands of Ti-O in the range of 400-550 cm-1 and 924 cm-1 while the band at 2930 cm-1 confirmed the association of bacterial biomolecules with the synthesized TiO2 NPs. XRD showed two major peaks; 27.5° (rutile phase) and 45.6° (anatase phase) for the synthesized TiO2 NPs. Finally, the potential of the synthesized TiO2 NPs was assessed as an antibacterial agent and photocatalyst. The remediation of Methylene blue (MB) and Orange G (OG) dyes was carried out under UV- light and visible light for a contact time of 150-240 min respectively. The removal efficiency for 100 ppm MB dye was 25.75% and for OG dye was 72.24% under UV light, while in visible light, the maximum removal percentage for MB and OG dye was 98.85% and 80.43% respectively at 90 min. Moreover, a kinetic study and adsorption isotherm study were carried out for the removal of both dyes, where the pseudo-first-order for MB dye is 263.269 and 475554.176 mg/g for OG dye. The pseudo-second-order kinetics for MB and OG dye were 188.679 and 1666.667 mg/g respectively. In addition to this, the antibacterial activity of TiO2 NPs was assessed against Bacillus subtilis MTCC 8322 (Gram-positive) and Escherichia coli MTCC 8933 (Gram-negative) where the maximum zone of inhibition in Bacillus subtilis MTCC 8322 was about 12 mm, and for E. coli 16 mm.

Sonocatalytic induced dye degradation and antibacterial performance of SrTiO3 nanoparticles embedded cotton fabric

In the present work, a pigment paste was prepared by adding strontium titanate (SrTiO3) nanoparticles (NPs) particles to a water and adhesive binder paste. Screen printing was utilized to embed the cotton fabric with the prepared pigment paste. Sonocatalytic induced antibacterial and dye mineralization abilities were evaluated for the printed fabric. The produced samples were examined for efficacy against the pathogens E. coli and S. aureus. The prepared SrTiO3 embedded cotton fabric inhibited (after 2 h) E. coli and S. aureus by 99.3% and 96.09%, respectively. The coated fabric was able to reduce pathogens by more than 92% even after 15 washing cycles. The Rhodamine B (RhB) dye was mineralized by 53% in 210 min by STO printed fabric as opposed to about 8% by pristine cotton. The results revealed that the intrinsic properties of cotton including tensile, abrasion, and air permeability remained unaffected by the printing of STO-NPs onto fabric.

Development of Antibacterial Cotton Textiles by Deposition of Fe2O3 Nanoparticles Using Low-Temperature Plasma Sputtering

Antibacterial textiles can help prevent infections from antimicrobial-resistant pathogens without using antibiotics. This work aimed to enhance the cotton fabric's antimicrobial properties by depositing Fe2O3 nanoparticles on both sides of its surface. The nanoparticles were deposited using low-temperature plasma technology in a pure oxygen atmosphere, which is environmentally friendly. The Fe2O3 nanoparticles formed clusters on the fabric surface, rather than thin films that could reduce the airflow of the textile. The optimal conditions for the nanoparticle deposition were 200 W of plasma power, 120 min of immersion time, and 5 cm of Fe cathode-textile sample distance. The received antimicrobial textile was tested and the high efficiency of developed materials were successfully demonstrated against 16 microbial strains (Gram-positive and Gram-negative bacteria and fungi).

PVA Nanofibers as an Insoluble pH Sensor

Turmeric has been widely studied as a color indicator for pH variations due to its halochromic properties. It has been tested in solution or included in some polymeric matrices. Some studies have demonstrated that its change in color is due to the tautomeric species of curcumin, and this property can be observed even if turmeric is assimilated in a film or nanofiber. Chitosan/polyethylene oxide (PEO) polymers have been tested in previous studies. Polyvinyl alcohol (PVA) nanofibers are used as potential carriers of drugs once they are insolubilized. The aim of this work is to cross-link PVA with citric acid (CA) to insolubilize the nanofibers and determine the effect on turmeric's halochromic properties. The nanofibers were treated with a sodium hydroxide (NaOH) solution, and a chromatic study was undertaken to determine color change. The change in color was assessed by eye (subjective) and by spectroscopy (objective). The nanofibers were characterized, in addition to the colorimetric study, by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) as well. The results demonstrate how thermal treatment induces cross-linking between the nanofibers, allowing them to keep their shape once the NaOH solution is applied to them. The opposite effect (solubilization) can be observed for non-cross-linked (NCL) samples. Although the final color varied, the cross-linked (CL) nanofibers' halochromic behavior was maintained. It was demonstrated that during cross-linking, ester groups are formed from the free carboxyl group in the cross-linked CA and the ketones present in the curcumin under acid conditions. So, CA acts as an acid catalyst to bond turmeric to the cross-linked PVA nanofibers.

Changes in characteristics of silver conductive fabrics owing to perspiration and washing

The original appearance and physical properties of smart clothing as well as the electrical properties of the conductive fabric applied, despite utilization and the management environment, need to be maintained. Previous research has only investigated the washability and functional changes of smart textiles according to the environment from the perspective of sensors and fabric material; however, they have not comprehensively considered actual usage conditions. In this study, changes in the appearance, color, chemical components, wettability, and electrical properties of silver-coated conductive knitted fabrics due to exposure to perspiration and washing were investigated based on the manufacturing methods of conductive fabrics. The conductive knitted fabric exposed to perspiration exhibited the most prominent color change, and the surface became rough and hydrophilic as AgCl and AgO were formed through a chemical reaction between perspiration and silver. In contrast, the conductivity of the fabric was enhanced by the release of Ag+ ions via perspiration. After washing, the silver layer on the surface of the conductive knitted fabric peeled off due to the interference and friction between the fabrics caused by the mechanical force generated during the cleaning process. There was no obvious chemical change, but the contact angle decreased as the nano-roughness decreased owing to the removal of silver particles. The conductivity slightly increased after washing but did not show a significant difference at 10% elongation. Finally, as the frequency of exposure to perspiration and washing increased, the silver layer coating the fiber or fabric surface peeled off and was damaged, resulting in a significant color change. Additionally, the chemical composition of the silver layer was significantly altered by perspiration and water and became hydrophilic. Surface resistance also increased linearly as the frequency of exposure to perspiration and washing increased. In terms of hand value, softness and smoothness decreased, and warmness increased after several cycles. Under all conditions, the conductive fabric with silver-coated yarn maintained a more optimized appearance and electrical properties than the silver-coated fabric according to the manufacturing method. Therefore, conductive yarn is more suitable for manufacturing conductive knitted fabrics for smart clothing in terms of durability. Additionally, specific management plans based on the actual use and environment of smart clothing using conductive knitted fabric are urgently needed.

Stearic Acid and CeO2 Nanoparticles Co-functionalized Cotton Fabric with Enhanced UV-Block, Self-Cleaning, Water-Repellent, and Antibacterial Properties

Superhydrophobic cotton fabrics with multifunctional features are highly desired in domestic and outdoor applications. However, the short coating longevity and hazardous reagents significantly reduce their commercial-scale applications. Herein, we introduce CeO2 nanoparticles and stearic acid (SA) to develop a fluorine-free, durable superhydrophobic cotton fabric that mimics the lotus effect. The pristine cotton fabric is treated with APTES-functionalized CeO2 nanoparticles by immersion followed by a dip and drying treatment with a 2% myristic acid solution. This sequential process creates a stable superhydrophobic cotton fabric (SA/CeO2-cotton fabric) with a water contact angle of 158° and a water sliding angle of 5°. The results are attributed to the combined effect of CeO2 nanoparticles and stearic acid that enhances surface roughness and reduces surface sorption energy. APTES facilitates the durable attachment of CeO2 nanoparticles and stearic acid to the cotton fabric. The modified cotton fabric is characterized by advanced analytical tools, demonstrating enhanced superhydrophobicity, self-cleaning, and antiwater absorption properties. Additionally, it exhibits remarkable UV-blocking (UPF 542) and antibacterial properties. The designed superhydrophobic cotton fabric unveils good mechanical, thermal, and chemical durability. The proposed strategy is simple, green, and economical and can be used commercially for functional fabric preparation.

The Enhanced Durability of AgCu Nanoparticle Coatings for Antibacterial Nonwoven Air Conditioner Filters

Antibacterial nonwoven fabrics, incorporated with Ag, have been applied as masks and air conditioner filters to prevent the spread of disease from airborne respiratory pathogens. In this work, we present a comparison study of Ag ions: Ag and AgCu nanoparticles (NPs) coated onto nonwoven fabrics intended for use as air conditioner antibacterial filters. We illustrate their color changes and durability running in air conditioners using antibacterial activity testing and X-ray Photoelectron Spectroscopic (XPS) analysis. We found that AgCu NPs showed the best antibacterial efficacy and durability. XPS analysis indicated that the Ag concentration, on both the AgCu and Ag- NP-coated fibers, changed little. On the contrary, the Ag concentration on Ag ion-coated fibers decreased by ~30%, and the coated NPs aggregated over time. The color change in AgCu NP-coated fabric, from yellow to white, is caused by oxide shell formation over the NPs, with nearly 46% oxidized silver. Our results, both from antibacterial evaluation and wind blowing tests, indicate that AgCu NP-coated fibers have higher durability, while Ag ion-coated fibers have little durability in such applications. The enhanced durability of the AgCu NP-coated antibacterial fabrics can be attributed to stronger NP-fiber interactions and greater ion release.

Gold Nanorods as Radiopharmaceutical Carriers: Preparation and Preliminary Radiobiological In Vitro Tests

Low-energy electrons (Auger electrons) can be produced via the interaction of photons with gold atoms in gold nanorods (AuNRs). These electrons are similar to those emitted during the decay of technetium-99m (^99mTc), a radioactive nuclide widely used for diagnostics in nuclear medicine. Auger and internal conversion (IC) electron emitters appropriately targeted to the DNA of tumors cells may, therefore, represent a new radiotherapeutic approach. ^99mTc radiopharmaceuticals, which are used for diagnosis, could indeed be used in theragnostic fields when loaded on AuNRs and delivered to a tumor site. This work aims to provide a proof of concept (i) to evaluate AuNRs as carriers of ^99mTc-based radiopharmaceuticals, and (ii) to evaluate the efficacy of Auger electrons emitted by photon-irradiated AuNRs in inducing radio-induced damage in T98G cells, thus mimicking the effect of Auger electrons emitted during the decay of ^99mTc used in clinical settings. Data are presented on AuNRs' chemical characterization (with an aspect ratio of 3.2 and Surface Plasmon Resonance bands at 520 and 680 nm) and the loading of pharmaceuticals (after ^99mTc decay) on their surface. Spectroscopic characterizations, such as UV-Vis and synchrotron radiation-induced X-ray photoelectron (SR-XPS) spectroscopies, were performed to investigate the drug-AuNR interaction. Finally, preliminary radiobiological data on cell killing with AuNRs are presented.

Green Nanomaterials for Smart Textiles Dedicated to Environmental and Biomedical Applications

Smart textiles recently reaped significant attention owing to their potential applications in various fields, such as environmental and biomedical monitoring. Integrating green nanomaterials into smart textiles can enhance their functionality and sustainability. This review will outline recent advancements in smart textiles incorporating green nanomaterials for environmental and biomedical applications. The article highlights green nanomaterials' synthesis, characterization, and applications in smart textile development. We discuss the challenges and limitations of using green nanomaterials in smart textiles and future perspectives for developing environmentally friendly and biocompatible smart textiles.

New insights from nanotechnology in SARS-CoV-2 detection, treatment strategy, and prevention

The recent outbreak of SARS-CoV-2 resulted into the deadly COVID-19 pandemic, which has made a profound impact on mankind and the world health care system. SARS-CoV-2 is mainly transmitted within the population via symptomatic carriers, enters the host cell via ACE2 and TMPSSR2 receptors and damages the organs. The standard diagnostic tests and treatment methods implemented lack required efficiency to beat SARS-CoV-2 in the race of its spreading. The most prominently used diagnostic test,reverse transcription-polymerase chain reaction (a nucleic acid-based method), has limitations including a prolonged time taken to reveal results, limited sensitivity, a high rate of false negative results, and lacking specificity due to a homology with other viruses. Furthermore, as part of the treatment, antiviral drugs such as remdesivir, favipiravir, lopinavir/ritonavir, chloroquine, daclatasvir, atazanavir, and many more have been tested clinically to check their potency for the treatment of SARS-CoV-2 but none of these antiviral drugs are the definitive cure or suitable prophylaxis. Thus, it is always required to combat SARS-CoV-2 spread and infection for a better and precise prognosis. This review answers the above mentioned challenges by employing nanomedicine for the development of improved detection, treatment, and prevention strategies for SARS-CoV-2. In this review, nanotechnology-based detection methods such as colorimetric assays, photothermal biosensors, molecularly imprinted nanoparticles sensors, electrochemical nanoimmunosensors, aptamer-based biosensors have been discussed. Furthermore, nanotechnology-based treatment strategies involving polymeric nanoparticles, metallic nanoparticles, lipid nanoparticles, and nanocarrier-based antiviral siRNA delivery have been depicted. Moreover, SARS-CoV-2 prevention strategies, which include the nanotechnology for upgrading personal protective equipment, facemasks, ocular protection gears, and nanopolymer-based disinfectants, have been also reviewed. This review will provide a one-site informative platform for researchers to explore the crucial role of nanomedicine in managing the COVID-19 curse more effectively.

A mini review on green nanotechnology and its development in biological effects

The utilization of living organisms for the creation of inorganic nanoscale particles is a potential new development in the realm of biotechnology. An essential milestone in the realm of nanotechnology is the process of creating dependable and environmentally acceptable metallic nanoparticles. Due to its increasing popularity and ease, use of ambient biological resources is quickly becoming more significant in this field of study. The phrase "green nanotechnology" has gained a lot of attention and refers to a variety of procedures that eliminate or do away with hazardous compounds to repair the environment. Green nanomaterials can be used in a variety of biotechnological sectors such as medicine and biology, as well as in the food and textile industries, wastewater treatment and agriculture field. The construction of an updated level of knowledge with utilization and a study of the ambient biological systems that might support and revolutionize the creation of nanoparticles (NPs) are presented in this article.

Antimicrobial Nanomaterials as Advanced Coatings for Self-Sanitizing of Textile Clothing and Personal Protective Equipment

Controlling bioaerosols has become increasingly critical in affecting human health. Natural product treatment in the nano form is a potential method since it has lower toxicity than inorganic nanomaterials like silver nanoparticles. This research is important for the creation of a bioaerosol control system that is effective. Nanoparticles (NPs) are gradually being employed to use bacteria as a nonantibiotic substitute for treating bacterial infections. The present study looks at nanoparticles' antimicrobial properties, their method of action, their impact on drug-opposing bacteria, and the hazards connected with their operation as antimicrobial agents. The aspects that influence nanoparticle conduct in clinical settings, as well as their distinctive features and mode of action as antibacterial assistants, are thoroughly examined. Nanoparticles' action on bacterial cells is presently accepted by way of the introduction of oxidative stress induction, metal-ion release, and nonoxidative methods. Because many concurrent mechanisms of action against germs would necessitate multiple simultaneous gene modifications in the same bacterial cell for antibacterial protection to evolve, bacterial cells developing resistance to NPs is difficult. This review discusses the antimicrobial function of NPs against microbes and presents a comprehensive discussion of the bioaerosols: their origin, hazards, and their prevention. This state of the art method is dependent upon the use of personal protective gear against these bioaerosols. The benefit of the utmost significant categories of metal nanoparticles as antibacterial agents is given important consideration. The novelty of this review depends upon the antimicrobial properties of (a) silver (Ag), (b) zinc oxide (ZnO), and (c) copper oxide (CuO) nanoparticles. The value-added features of these nanoparticles are discussed, as well as their physicochemical characterization and pharmacokinetics, including the toxicological danger they pose to people. Lastly, the effective role of nanomaterials and their future in human wellness is discussed.

Modification of Cotton and Leather Surfaces Using Cold Atmospheric Pressure Plasma and TiO2-SiO2-Reduced Graphene Oxide Nanopowders

Surface modification of textile fabrics and leathers is very versatile and allows the products quality improvement. In this work, cotton and leather substrates were pre-treated with cold atmospheric pressure plasma (CAPP) and further coated with TiO₂-SiO₂-reduced graphene oxide composites in dispersion form. By using a Taguchi scheme, this research evaluated the effect of three significant parameters, i.e., the pre-treatment with CAPP, organic dispersion coating and TiO₂-SiO₂-reduced graphene oxide (TS/GR) composites, that may affect the morpho-structural properties and photocatalytic activity of modified cotton and leather surfaces. The characteristics of cotton/leather surfaces were evaluated by morphological, structural, optical and self-cleaning ability using scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX), X-ray powder diffraction (XRD), attenuated total reflection-Fourier Transform Infrared spectroscopy (ATR-FTIR) and UV-Vis spectroscopy. The self-cleaning performance of the obtained cotton and leather samples was evaluated by photocatalytic discoloration of berry juice surface stains under UV light irradiation for 12 h. The successfulness of coating formulations was proven by the SEM analysis and UV-Vis spectroscopy. The XRD patterns and ATR-FTIR spectra revealed the cellulose and collagen structures as dominant components of cotton and leather substrates. The CAPP treatment did not damage the cotton and leather structures. The photocatalytic results highlighted the potential of TiO₂-SiO₂-reduced graphene oxide composites in organic dispersion media, as coating formulations, for further use in the fabrication of innovative self-cleaning photocatalytic cotton and leather products.

Biogeneration of silver nanoparticles from Cuphea procumbens for biomedical and environmental applications

Nanotechnology is one of the most important and relevant disciplines today due to the specific electrical, optical, magnetic, chemical, mechanical and biomedical properties of nanoparticles. In the present study we demonstrate the efficacy of Cuphea procumbens to biogenerate silver nanoparticles (AgNPs) with antibacterial and antitumor activity. These nanoparticles were synthesized using the aqueous extract of C. procumbens as reducing agent and silver nitrate as oxidizing agent. The Transmission Electron Microscopy demonstrated that the biogenic AgNPs were predominantly quasi-spherical with an average particle size of 23.45 nm. The surface plasmonic resonance was analyzed by ultraviolet visible spectroscopy (UV-Vis) observing a maximum absorption band at 441 nm and Infrared Spectroscopy (FT IR) was used in order to structurally identify the functional groups of some compounds involved in the formation of nanoparticles. The AgNPs demonstrated to have antibacterial activity against the pathogenic bacteria Escherichia coli and Staphylococcus aureus, identifying the maximum zone of inhibition at the concentration of 0.225 and 0.158 µg/mL respectively. Moreover, compared to the extract, AgNPs exhibited better antitumor activity and higher therapeutic index (TI) against several tumor cell lines such as human breast carcinoma MCF-7 (IC₅₀ of 2.56 µg/mL, TI of 27.65 µg/mL), MDA-MB-468 (IC₅₀ of 2.25 µg/mL, TI of 31.53 µg/mL), human colon carcinoma HCT-116 (IC₅₀ of 1.38 µg/mL, TI of 51.07 µg/mL) and melanoma A-375 (IC₅₀ of 6.51 µg/mL, TI of 10.89 µg/mL). This fact is of great since it will reduce the side effects derived from the treatment. In addition, AgNPs revealed to have a photocatalytic activity of the dyes congo red (10^-3 M) in 5 min and malachite green (10^-3 M) in 7 min. Additionally, the degradation percentages were obtained, which were 86.61% for congo red and 82.11% for malachite green. Overall, our results demonstrated for the first time that C. procumbens biogenerated nanoparticles are excellent candidates for several biomedical and environmental applications.

Recent advances in piezoelectric textile materials: A brief literature review

Smart textiles (ST) can be defined as materials capable of detecting an external stimulus, responding, and adapting its behavior according to the stimulus obtained. The field of study and development of these materials is extensive, and ST can be seen in areas such as health, transport, security, civil construction, and sports. Piezoelectric textiles are part of the ST category and are characterized due the ability to generate electrical energy from mechanical stimulus, and vice versa. Therefore, the main objective of this review is to present the current research on piezoelectric ST. In addition, the study highlights the process of obtaining materials with piezoelectric properties and the challenges and limitations, seeking to understand the contribution of the development of these materials in the field of wearable electronic devices. Thus, the main challenge in developing piezoelectric textiles is in the ability to supply energy to electronic devices to be applied in various fields such as motion detection, acoustics, impact absorption, among others. Moreover, piezoelectric ST is remarkably promising for the development of wearable electronic textiles (e-textiles) that consequently impact the creation of new functional materials that enable renewable sources to offer a positive contribution in the daily society.

Stretchable One-Dimensional Conductors for Wearable Applications

Continuous, one-dimensional (1D) stretchable conductors have attracted significant attention for the development of wearables and soft-matter electronics. Through the use of advanced spinning, printing, and textile technologies, 1D stretchable conductors in the forms of fibers, wires, and yarns can be designed and engineered to meet the demanding requirements for different wearable applications. Several crucial parameters, such as microarchitecture, conductivity, stretchability, and scalability, play essential roles in designing and developing wearable devices and intelligent textiles. Methodologies and fabrication processes have successfully realized 1D conductors that are highly conductive, strong, lightweight, stretchable, and conformable and can be readily integrated with common fabrics and soft matter. This review summarizes the latest advances in continuous, 1D stretchable conductors and emphasizes recent developments in materials, methodologies, fabrication processes, and strategies geared toward applications in electrical interconnects, mechanical sensors, actuators, and heaters. This review classifies 1D conductors into three categories on the basis of their electrical responses: (1) rigid 1D conductors, (2) piezoresistive 1D conductors, and (3) resistance-stable 1D conductors. This review also evaluates the present challenges in these areas and presents perspectives for improving the performance of stretchable 1D conductors for wearable textile and flexible electronic applications.

Antibacterial, UV-Protective, Hydrophobic, Washable, and Heat-Resistant BN-Based Nanoparticle-Coated Textile Fabrics: Experimental and Theoretical Insight

The use of nanoparticles (NPs) to modify the surface of cotton fabric is a promising approach to endowing the material with a set of desirable characteristics that can significantly expand the functionality, wear comfort, and service life of textile products. Herein, two approaches to modifying the surface of hexagonal boron nitride (h-BN) NPs with a hollow core and a smooth surface by treatment with maleic anhydride (MA) and diethylene triamine (DETA) were studied. The DETA and MA absorption on the surface of h-BN and the interaction of surface-modified h-NPs with cellulose as the main component of cotton were modeled using density functional theory with the extended Perdew-Burke-Ernzerhof functional. Theoretical modeling showed that the use of DETA as a binder agent can increase the adhesion strength of BN NPs to textile fabric due to the simultaneous hydrogen bonds with cellulose and BN. Due to the difference in zeta potentials (-38.4 vs -25.8 eV), MA-modified h-BN NPs form a stable suspension, while DETA-modified BN NPs tend to agglomerate. Cotton fabric coated with surface-modified NPs exhibits an excellent wash resistance and high hydrophobicity with a water contact angle of 135° (BN-MA) and 146° (BN-DETA). Compared to the original textile material, treatment with MA- and DETA-modified h-BN NPs increases heat resistance by 10% (BN-MA fabric) and 15% (BN-DETA fabric). Cotton fabrics coated with DETA- and MA-modified BN NPs show enhanced antibacterial activity against Escherichia coli U20 and Staphylococcus aureus strains and completely prevent the formation of an E. coli biofilm. The obtained results are important for the further development of fabrics for sports and medical clothing as well as wound dressings.

Self-induced transformation of raw cotton to a nanostructured primary cell wall for a renewable antimicrobial surface

Herein, raw cotton is shown to undergo self-induced transformation into a nanostructured primary cell wall. This process generates a metal nanoparticle-mediated antimicrobial surface that is regenerable through multiple washings. Raw cotton, without being scoured and bleached, contains noncellulosic constituents including pectin, sugars, and hemicellulose in its primary cell wall. These noncellulosic components provide definitive active binding sites for the in situ synthesis of silver nanoparticles (Ag NPs). Facile heating in an aqueous solution of AgNO3 activated raw cotton to produce Ag NPs (ca. 28 nm in diameter and 2261 mg kg-1 in concentration). Compared with scoured and bleached cotton, raw cotton requires lower concentrations of AgNO3-ten times lower for Klebsiella pneumonia and two times lower for Staphylococcus aureus-to achieve 99.9% reductions of both Gram-positive and Gram-negative bacteria. The Ag NPs embedded in the primary cell wall, which was confirmed via transmission electron microscopy images of the fiber cross-sections, are immobilized, exhibiting resistance to leaching as judged by continuous laundering. A remarkable percentage (74%) of the total Ag NPs remained in the raw cotton after 50 laundering cycles.

Recent Advances in Functionalization of Cotton Fabrics with Nanotechnology

Nowadays, consumers understand that upgrading their traditional clothing can improve their lives. In a garment fabric, comfort and functional properties are the most important features that a wearer looks for. A variety of textile technologies are being developed to meet the needs of customers. In recent years, nanotechnology has become one of the most important areas of research. Nanotechnology's unique and useful characteristics have led to its rapid expansion in the textile industry. In the production of high-performance textiles, various finishing, coating, and manufacturing techniques are used to produce fibers or fabrics with nano sized (10-9) particles. Humans have been utilizing cotton for thousands of years, and it accounts for around 34% of all fiber production worldwide. The clothing industry, home textile industry, and healthcare industry all use it extensively. Nanotechnology can enhance cotton fabrics' properties, including antibacterial activity, self-cleaning, UV protection, etc. Research in the field of the functionalization of nanotechnology and their integration into cotton fabrics is presented in the present study.

Stabilization of Silver Nanoparticles on Polyester Fabric Using Organo-Matrices for Controlled Antimicrobial Performance

Antimicrobial textiles are helpful tools to fight against multidrug-resistant pathogens and nosocomial infections. The deposition of silver nanoparticles (AgNPs) onto textiles has been studied to achieve antimicrobial properties. Yet, due to health and environmental safety concerns associated with such formulations, processing optimizations have been introduced: biocompatible materials, environmentally friendly agents, and delivery platforms that ensure a controlled release. In particular, the functionalization of polyester (PES) fabric with antimicrobial agents is a formulation in high demand in medical textiles. However, the lack of functional groups on PES fabric hinders the development of cost-effective, durable systems that allow a controlled release of antimicrobial agents. In this work, PES fabric was functionalized with AgNPs using one or two biocompatible layers of chitosan or hexamethyldisiloxane (HMDSO). The addition of organo-matrices stabilized the AgNPs onto the fabrics, protected AgNPs from further oxidation, and controlled their release. In addition, the layered samples were efficient against Staphylococcus aureus and Escherichia coli. The sample with two layers of chitosan showed the highest efficacy against S. aureus (log reduction of 2.15 ± 1.08 after 3 h of contact). Against E. coli, the sample with two layers of chitosan showed the best properties. Chitosan allowed to control the antimicrobial activity of AgNPs, avoid the complete loss of AgNPs after washings and act in synergy with AgNPs. After 3 h of incubation, this sample presented a log reduction of 4.81, and 7.27 of log reduction after 5 h of incubation. The antimicrobial results after washing showed a log reduction of 3.47 and 4.88 after 3 h and 5 h of contact, respectively. Furthermore, the sample with a final layer of HMDSO also presented a controlled antimicrobial effect. The antimicrobial effect was slower than the sample with just an initial layer of HMDSO, with a log reduction of 4.40 after 3 h of incubation (instead of 7.22) and 7.27 after 5 h. The biocompatibility of the composites was confirmed through the evaluation of their cytotoxicity towards HaCaT cells (cells viability > 96% in all samples). Therefore, the produced nanocomposites could have interesting applications in medical textiles once they present controlled antimicrobial properties, high biocompatibility and avoid the complete release of AgNPs to the environment.