Sustainable remediation of hazardous environmental pollutants using biochar-based nanohybrid materials

Sustainable biomass-derived activated biochar/polyaniline/alginate composite beads for enhanced methylene blue adsorption: Experimental and theoretical investigations

This study investigates biomass-derived adsorbents in powder and bead forms for the efficient removal of methylene blue MB from wastewater. Activated biochar powders (ABC and ABCZ) were synthesized using H3PO4 and ZnCl2 as activators for the chemical treatment of Crataegus azarolus CAS seed waste, while polyaniline (PA) and sodium alginate (SG) were integrated to form two bead-shaped composites. Compared to ZnCl2, H3PO4 activation produced similar acidic site concentrations but resulted in improved mesoporosity and larger pore diameters. Untreated lignin-like ABC and PA-functionalized ABC were successfully encapsulated into uniform composite beads (ABC-SG and ABC-PA-SG) with negatively charged surfaces at neutral pH of solution as confirmed by FTIR, TGA, and pHpzc analyses. Adsorption efficiency depended on material composition, form, and texture. Encapsulation significantly enhanced MB adsorption capacity, with ABC-PA-SG beads achieving 821 mg/g, compared to 261 mg/g for ABC powder. While greater surface area improved MB adsorption in powders, PA incorporation in composite beads contributed to higher adsorption performance. Kinetic modeling showed that MB adsorption on ABC powder was governed by chemisorption and pores filling, while composite beads followed a physical interaction-driven process. Thermodynamic analysis confirmed that adsorption was spontaneous and endothermic. Statistical modeling and DFT calculations provided deeper insights into the adsorption mechanisms. π-π interactions dominated MB adsorption, with a horizontal molecular arrangement. ABC powders exhibited multilayer pore filling on a heterogeneous surface, whereas adsorption on ABC-PA-SG beads followed a double-energy double-layer mechanism. This study provides integrated insights into biomass-derived composite beads adsorbents, highlighting their potential for sustainable wastewater treatment applications.

Intrinsic structure-function connections of carbon-encapsulated nanoscale zero-valent-iron using various pyrolysis atmospheres

Carbon-encapsulated nanoscale zero-valent-iron (C@Fe0) derived from plant-based extracts has been the subject of growing interest due to its environmental friendliness. However, the effects of various pyrolysis atmospheres on the structure-function connections of C@Fe0 are still unclear. In this study, three pyrolytic atmospheres, namely Air, N2, and 5% H2/Ar were selected to fabricate X-C@Fe0 (X represented as A, N, H) for removing 2,4,6-Trichlorophenol (TCP), and the relationships between their structures and functions were demonstrated. The N-C@Fe0 with improved hydrophobicity exhibited superior TCP adsorptive performance compared to H-C@Fe0 and A-C@Fe0. Apart from this, N-C@Fe0 effectively reduced TCP through dechlorination, this process achieved 25.9% dichlorination efficiency, and in turn alleviated products toxicity. Electrochemical tests and density functional theory calculations showed that the substitution of nitrogen with carbon in N-C@Fe0 elevated the Fe-d band center and enhanced the hybridization between Fe-3d and C-2p orbital, which collectively promoted the dichlorination of TCP. This study will provide practical guideline for improving the intrinsic activity of iron-carbon materials using pyrolytic atmosphere engineering.

Rice straw waste-based green synthesis and characterizations investigation of Fe-MoS2-derived nanohybrid

In present work, synthesis of a nanohybrid material using Fe and MoS2 has been performed via a cost-effective and environmentally friendly route for sustainable manufacturing innovation. Rice straw extract was prepared and used as a reducing and chelating agent to synthesize the nanohybrid material by mixing it with molybdenum disulfide (MoS2) and ferric nitrate [Fe (NO3)3.9H2O], followed by heating and calcination. The X-ray diffraction (XRD) pattern confirms the formation of a nanohybrid consisting of monoclinic Fe2(MoO4)3, cubic Fe2.957O4, and orthorhombic FeS with 86% consisting of Fe2(MoO4)3. The properties were analyzed through Fourier-transformed infrared spectroscopy (FTIR), atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results of the dynamic light scattering (DLS) study revealed a heterogeneous size distribution, with an average particle size of 48.42 nm for 18% of particles and 384.54 nm for 82% of particles. Additionally, the zeta potential was measured to be -18.88 mV, suggesting moderate stability. X-ray photoelectron spectroscopy (XPS) results confirmed the presence of both Fe2+ and Fe3+ oxidation states along with the presence of Molybdenum (Mo), oxygen (O), and Sulphur (S). The prepared nanohybrid material exhibited a band gap of 2.95 eV, and the photoluminescence intensity increased almost twice that of bare MoS2. The present work holds potential applications in photo luminescent nanoplatform for biomedical applications.

Applications of engineered biochar in remediation of heavy metal(loid)s pollution from wastewater: Current perspectives toward sustainable development goals

Environmental pollution of heavy metal(loid)s (HMs) caused adverse impacts, has become one of the emerging concerns and challenges worldwide. Metal(loid)s can pose significant threats to living organisms even when present in trace levels within environmental matrices. Extended exposure to these substances can lead to adverse health consequences in humans. Removing HM-contaminated water and moving toward sustainable development goals (SDGs) is critical. In this mission, biochar has recently gained attention in the environmental sector as a green and alternative material for wastewater removal. This work provides a comprehensive analysis of the remediation of typical HMs by biochars, associated with an understanding of remediation mechanisms, and gives practical solutions for ecologically sustainable. Applying engineered biochar in various fields, especially with nanoscale biochar-aided wastewater treatment approaches, can eliminate hazardous metal(loid) contaminants, highlighting an environmentally friendly and low-cost method. Surface modification of engineered biochar with nanomaterials is a potential strategy that positively influences its sorption capacity to remove contaminants. The research findings highlighted the biochars' ability to adsorb HM ions based on increased specific surface area (SSA), heightened porosity, and forming inner-sphere complexes with oxygen-rich groups. Utilizing biochar modification emerged as a viable approach for addressing lead (Pb), cadmium (Cd), arsenic (As), mercury (Hg), and chromium (Cr) pollution in aqueous environments. Most biochars investigated demonstrated a removal efficiency >90 % (Cd, As, Hg) and can reach an impressive 99 % (Pb and Cr). Furthermore, biochar and advanced engineered applications are also considered alternative solutions based on the circular economy.

Waste paper-derived porous carbon via microwave-assisted activation for energy storage and water purification

The reuse of waste papers by conversion into valuable carbon materials has received considerable attention for diverse applications such as energy storage and water purification. However, traditional methods for converting waste papers into materials with suitable properties for specific applications are often complex and ineffective, involving consecutive carbonization and activation steps. Herein, we propose a simple one-step microwave (MW)-assisted synthesis for preparing waste paper-derived porous carbons (WPCs) for energy storage and water purification. Through a 30-min synthesis, WPCs with graphitic structure and high specific surface area were successfully produced. The fabricated WPCs exhibited outstanding charge storage capability with a maximum specific capacitance of 237.7 F g-1. Additionally, the WPC demonstrates a high removal efficiency for various dyes, achieving a maximum removal efficiency of 95.0% for methylene blue. The developed one-step MW synthesis not only enables the production of porous carbon from waste paper, but also offers a viable approach to address solid waste management challenges while simultaneously yielding valuable materials.

Aging properties and cadmium remediation mechanism of biochar in sediment from phosphorus-rich water

Cadmium (Cd) is the main heavy metal pollutant in sediments from East China. The biochar-sediment nexus can provide carbon sequestration and pollution control. In this work, an in situ study was conducted to investigate the long-term effects and control mechanism of biochar and the effect of biochar aging on Cd stabilization in overlying water-pore water-sediment. The Cd2+ concentration in the overlying water was positively correlated with total nitrogen (0.960, P < 0.05), total organic carbon (0.983, P < 0.05), and total phosphorus (0.993, P < 0.01) in pore water. Biochar stabilized Cd2+ by increasing the pH and oxidation-reduction potential of the sediment environment and promoting the formation of Cd1.25Ca0.75(P2O7) on the biochar surface in sediment from phosphorus-rich water. These changes were closely related to the Brunauer-Emmett-Teller surface area and average pore size of the biochar. Within 60 days, the biochar in the sediment underwent aging, which was closely related to the preparation temperature of the biochar. The organic composition of biochar prepared at a low temperature (≤ 300 °C) and the surface structure of biochar prepared at a high temperature (≥ 500 °C) were altered. The biochar parameter changes were in the order of pore volume > Brunauer-Emmett-Teller surface area > pore size. Our results show that biochar modification can enhance the remediation capacity of biochar, but may be unfavorable to biochar anti-aging. This knowledge will support policymakers and researchers when exploring long-term biochar use in contamination control and strengthen future research.

Industrial and agricultural waste amendments interact with microorganism activities to enhance P availability in rice-paddy soils

Adding industrial and agricultural wastes to farmland can increase soil available phosphorus (P) pool and boost crop production, but the process affecting soil P transformation and bioavailability is still poorly understood. We studied the effects of straw (ST), biochar (BC) and Si-modified biochar (Si-BC) amendments on the available-P content and its fraction transformation in rice-paddy soils. Our results showed that these three soil amendments significantly increased the concentrations of both microbial biomass carbon (MBC) and microbial biomass-P (MBP) during the first rice season; by contrast, the effects of ST and BC application were relatively poor on acid-phosphatase (ACP) activity, which was increased by 24 % under ST and 14 % under BC. Soil total P concentrations did not differ significantly, although the concentration and percentage of each P-fraction were altered significantly among treatments. Although all three applications increase soil available-P concentration by promoting the transformation of organic-P (Po) components to inorganic-P (Pi), there are differences in the transformation efficiency of the soil P fraction between these amendments. Redundancy analysis results also showed significant clustering of soil P-fraction transformations after ST and BC treatments. Structural equation model analysis further indicated that all amendments regulated microbial processes by changing soil pH and dissolved organic carbon (DOC), thereby promoting soil P transformation and improving P efficiency. Sodium bicarbonate-extractable Po (NaHCO3-Po) contributed most to soil available-P under the different amendments. Compared to ST and Si-BC, BC application improved more soil microbial status and the transformation of soil unavailable-P into available-P, therefore the application of BC in rice fields is the most beneficial method to promote phosphorus use and production sustainability in rice. These findings helped to understand the effects of using industrial and agricultural waste (e.g. straw, biochar and Si-modified biochar) on soil P-fractions and so provided a reference for sustainable resource use and green production in rice-paddy ecosystems.

Enhancing the Potential of Polymer Composites Using Biochar as a Filler: A Review

This article discusses the scope biochar's uses; biochar is a sustainable organic material, rich in carbon, that can be synthesized from various types of biomass feedstock using thermochemical reactions such as pyrolysis or carbonization. Biochar is an eco-friendly filler material that can enhance polymer composites' mechanical, thermal, and electrical performances. In comparison to three inorganic fillers, namely carbon black, carbon nanotubes (CNT), and carbon filaments, this paper explores the optimal operating conditions for regulating biochar's physical characteristics, including pore size, macro- and microporosity, and mechanical, thermal, and electrical properties. Additionally, this article presents a comparative analysis of biochar yield from various thermochemical processes. Moreover, the review examines how the surface functionality, surface area, and particle size of biochar can influence its mechanical and electrical performance as a filler material in polymer composites at different biochar loads. The study showcases the outstanding properties of biochar and recommends optimal loads that can improve the mechanical, thermal, and electrical properties of polymer composites.

Quantifying plastic waste generation in Aizawl city, India: waste management and its impact on human and environmental health

Plastic wastes in recent years have become a menace owing to population pressure and high demand of various plastic products in daily use. A study was conducted in Aizawl city of northeast India for a period of 3 years to quantify various types of plastic wastes. Our study found that a present plastic consumption of 13.06 g/capita/day although low when compared to developed countries continues; the generation will be doubled after a decade as the population is projected to double specially due to migration from rural areas. The plastic waste was contributed more by the high-income group of the population with a correlation factor of r = 0.97. Among the total plastic waste, packaging plastics contributed maximum with an average of 52.56% and carry bags among the packaging contribute maximum with 32.55% in the three sectors, namely, residential, commercial, and dumping sites. The result leads to a maximum contribution by the LDPE polymer with 27.46% among seven categories of polymers.

Treatment of textile wastewater using carbon-based nanomaterials as adsorbents: a review

Waste derived from the textile industry can contain a wide variety of pollutants of organic and inorganic natures, such as dyes (e.g., acid, basic, reactive, mordant dyes) and toxic metals (e.g., lead, chromium, cadmium). The presence of pollutants at high concentrations in textile waste makes them relevant sources of pollution in the environment. To solve this problem, various technologies have been developed for the removal of pollutants from these matrices. Thus, adsorption emerges as an efficient alternative for textile waste remediation, providing advantages as simplicity of operation, economy, possibility of using different adsorbent materials, and developing on-line systems that allow the reuse of the adsorbent during several adsorption/desorption cycles. This review will initially propose an introduction to the adsorption world, its fundamentals, and aspects related to kinetics, equilibrium, and thermodynamics. The possible mechanisms through which a pollutant can be retained on an adsorbent will be explained. The analytical techniques that offer valuable information to characterize the solid phases as well as each adsorbate/adsorbent system will be also commented. The most common synthesis techniques to obtain carbon nano-adsorbents have been also presented. In addition, the latest advances about the use of these adsorbents for the removal of pollutants from textile waste will be presented and discussed. The contributions reported in this manuscript demonstrated the use of highly efficient carbon-based nano-adsorbents for the removal of both organic and inorganic pollutants, reaching removal percentages from 65 to 100%.

Mini-review on remediation of plastic pollution through photoreforming: progress, possibilities, and challenges

The increasing plastic pollution has raised significant concerns about the environment and the destruction of its precious resources. Making value-added products out of plastic waste is an effective way to reduce plastic pollution and use it as a valuable resource. Plastic reforming driven by sunlight offers a quick and low-energy way to produce hydrogen from waste. Photoreforming of plastic waste is an emerging technology that cannot only break down plastic polymer waste into value-added chemicals but also produce solar fuel cell quality H2. Technologies, such as pyrolysis, combustion, and advanced oxidation, are right now being studied for converting plastic pollution into energy. A thorough summary and comparison of different technologies have not yet been published. Open dumping and combustion are two main steps to deal with waste plastics, but these processes experience inefficiencies and cannot adequately address the challenges. In this mini-review, we aimed to provide a short overview of the recently reported conventional and novel plastic waste treatment methods. The current research on the photoreforming of plastics conducted by various groups and some advantages and disadvantages of this practice has been discussed thoroughly. Also, some notes were made on the prospective future scope present in this particular research area to achieve a carbon-free fuel system. The purpose of this review is to encourage the utilisation of plastic garbage as an alternative source of energy.

Improving the efficiency of metal ions doped Fe2O3 nanoparticles: Photocatalyst for removal of organic dye from aqueous media

The metal ion-based nanocomposite photocatalysts were accepted to exhibit a wide range of photocatalytic and biological applications. In this paper, we synthesize bare Fe₂O₃, 1 wt% metal (Ag, Co, and Cu) doped Fe₂O₃ nanoparticles (NPs) using a simple hydrothermal process and wet impregnation method. The as-prepared nanomaterials crystalline structure, shape, optical characteristics, and elemental composition were determined by using X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Scanning electron microscope (SEM), Energy-dispersive X-ray (EDS) and Transmission electron microscopy (TEM) techniques. Furthermore, the synthesized nanocomposites were utilized as a photosensitizer for the degradation of reactive red (RR120) and orange II (O-II) dyes under sunlight irradiation. The synthesized 1 wt% Ag-Fe₂O₃ (AgF) NPs samples exhibit a more exceptional catalytic performance of RR120 and O-II dyes (98.32%) within 120 min than the existing Fe₂O₃, 1 wt% Co-Fe₂O₃, and Cu-Fe₂O₃ NPs. The effect of parameters such as exciton formation under solar irradiation, charge recombination rate, and surface charge availability. The metal oxide-doped nanocomposite economic relevance is revealed by their long-term durability and recyclability in photodegradation reactions. The photocatalytic investigations show that the active species O₂^∙-, HO^∙ and h⁺ play an important role in the dye degradation process. This research might pave the opportunity for the sustainable development of greater photocatalysts for photodegradation and a wide range of environmental applications.

Remediation competence of nanoparticles amalgamated biochar (nanobiochar/nanocomposite) on pollutants: A review

Advanced biochar blended nanoparticles substances, such as nano biochar or nanocomposites, have provided long-term solutions to a wide range of modern-day problems. Biochar blended nano-composites can be created to create better composite materials that combine the benefits of biochar and nanoparticles. Such materials have been typically improved with active functional groups, porous structure, active surface area, catalytic deterioration ability, as well as easy recovery or separation of pollutants. Such biochar-basednanocomposites have good adsorption properties for a variety of pollutants in various form of polluted medium (soil and water contamination). Catalytic nanoparticle encapsulated biochar, can perform concurrently the adsorption (by biochar) as well as catalytic degradation (nanoparticles) functions for pollutants removal from polluted sites. In this review, the advanced and practically feasible techniques involved in the biochar blended nanoparticles-based nanocomposites have been discussed with environmental applications. Furthermore, the mechanisms involved in this composite material in remediation, as well as the advantages and disadvantages of biochar blended nanoparticles-based nanocomposites, were discussed, and future directions for study in this field were suggested.

Functionalized metal-organic framework-derived carbon: Effective adsorbent to eliminate methylene blue, a small cationic dye from water

Elimination of organic dyes from wastewater is very important for our safe environment and sound health. In this work, adsorptive removal of cationic dyes, especially small ones, was investigated with carbonaceous materials to develop a competitive adsorption technology. To improve the performance of metal-organic framework (MOF)-derived carbons (MDCs) in dye adsorption, an MDC, derived from a MOF (MAF-6), was oxidatively functionalized with ammonium persulfate solutions (APSs). Although the porosity of pristine MDC decreased with functionalization via oxidation, functionalized MDCs (FMDCs), especially FMDC(1.0) that was obtained via treating MDC with APS (1.0 M), showed remarkable performances in the adsorption of small cationic dyes like methylene blue (MB) and azure B. For example, FMDC(1.0) had the maximum adsorption capacity (Q_o) of 625.0 mg/g (for MB) which is larger than any reported value with carbonaceous materials. Moreover, the obtained Q_o was around 4 and 2 times that of activated carbon with Q_o of 160 mg/g and MDC with Q_o of 298 mg/g, respectively. On the contrary, oxidative treatment of MDC was negative in adsorption of an anionic dye such as methyl orange. Moreover, the functionalized MDC was not very effective in the adsorption of cationic dyes with large sizes (like brilliant green, crystal violet, Janus green B, and rhodamine B) because of the limited pore size of the studied adsorbent FMDC(1.0). The remarkable adsorption of MB over FMDC(1.0) could be explained by electrostatic and π-π interactions. Finally, the facile recyclability of the FMDC(1.0) in MB adsorption was confirmed via successive adsorptions, FT-IR, and nitrogen adsorption; therefore, FMDC(1.0) can be suggested as a potential adsorbent to remove cationic dyes, especially with small molecular sizes.

Enhanced photocatalytic activity of novel Canthium coromandelicum leaves based copper oxide nanoparticles for the degradation of textile dyes

The present study focused to synthesize the copper oxide nanoparticles (CuONPs) using novel Canthium coromandelicum leaves in a cost-effective, easy, and sustainable approach. The obtained Canthium coromandelicum-copper oxide nanoparticles (CC-CuONPs) were characterized using UV-Visible spectroscopy, FT-IR analysis, FESEM, HR-TEM imaging, and XRD study. The XRD pattern verified the development of crystalline CC-CuONPs with an average size of 33 nm. The biosynthesized CC-CuONPs were roughly spherical, according to HR-TEM and FESEM analyses. FT-IR research verified the existence of functional groups involved in CC-CuONPs production. Cu and O₂ have high-energy signals of 78.32% and 12.78%, respectively, according to data from EDX. The photocatalytic evaluation showed that synthesized CC-CuONPs have the efficiency of degrading methylene blue (MB) and methyl orange (MO) by 91.32%, 89.35% respectively. The findings showed that biosynthesized CC-CuONPs might effectively remove contaminants in an environmentally acceptable manner.

Nano-remediation technologies for the sustainable mitigation of persistent organic pollutants

The absence of novel and efficient methods for the elimination of persistent organic pollutants (POPs) from the environment is a serious concern in the society. The pollutants release into the atmosphere by means of industrialization and urbanization is a massive global hazard. Although, the eco-toxicity associated with nanotechnology is still being debated, nano-remediation is a potentially developing tool for dealing with contamination of the environment, particularly POPs. Nano-remediation is a novel strategy to the safe and long-term removal of POPs. This detailed review article presents an important perspective on latest innovations and future views of nano-remediation methods used for environmental decontamination, like nano-photocatalysis and nanosensing. Different kinds of nanomaterials including nanoscale zero-valent iron (nZVI), carbon nanotubes (CNTs), magnetic and metallic nanoparticles, silica (SiO2) nanoparticles, graphene oxide, covalent organic frameworks (COFs), and metal organic frameworks (MOFs) have been summarized for the mitigation of POPs. Furthermore, the long-term viability of nano-remediation strategies for dealing with legacy contamination was considered, with a particular emphasis on environmental and health implications. The assessment goes on to discuss the environmental consequences of nanotechnology and offers consensual recommendations on how to employ nanotechnology for a greater present and a more prosperous future.

Effects of slag and biochar amendments on microorganisms and fractions of soil organic carbon during flooding in a paddy field after two years in southeastern China

Incorporating amendments of industrial waste such as biochar and steel slag in cropland has been used to enhance the storage of soil organic carbon (SOC) while sustaining crop production. Short-term laboratory and field studies have identified important influences of biochar on active SOC fractions associated with soil microbial activity in paddy soils, but the long-term effects remain poorly understood. To address these knowledge gaps, we examined the effects of slag, biochar, and slag+biochar treatments on total SOC concentration, active SOC fractions and soil microbial communities in a paddy field two years after incorporation. Across both two seasons, the addition of slag, biochar, slag+biochar increased soil salinity by 26-80%, 1.3-37% and 42-79%, and also increased soil pH by 0.8-5.7%, 2.1-2.4% and 4.0-6.3%, respectively, relative to the control. SOC concentration was higher in the slag, biochar, and slag+biochar treatments across both rice seasons by 4.3-5%, 0.5-17% and 4.3-7%, respectively. Soil C-pool activity and C-pool management indices in the late paddy season were significantly lower in the slag+biochar treatment than the control by 26.3 and 21.3%, respectively, indicating that the amendments contributed to the stability of SOC. The C concentrations of the biochar and slag amendments affected bacterial abundance more than fungal abundance and affected C cycling. Our study suggests that combined slag and biochar amendments may increase bacterial abundance that may maintain SOC storage and reduce the abundances of potential SOC decomposers in key functional genera, indicating strong coupling relationships with changes of soil properties such as salinity, pH, and SOC concentration. These outcomes due to the amendments (e.g. slag+biochar) may increase microbial C-use efficiency and support the stability of active SOC fractions, with opportunities for long-term C sequestration.

Biochar-based composites for remediation of polluted wastewater and soil environments: Challenges and prospects

Pharmaceuticals, heavy metals, pesticides, and dyes are the main environmental contaminants that have serious effects on both land and aquatic lives and necessitate the development of effective methods to mitigate these issues. Although some conventional methods are in use to tackle soil contamination, but biochar and biochar-based composites represent a reliable and sustainable means to deal with a spectrum of toxic organic and inorganic pollutants from contaminated environments. The capacity of biochars and derived constructs to remediate inorganic dyes, pesticides, insecticides, heavy metals, and pharmaceuticals from environmental matrices is attributed to their extensive surface area, surface functional groups, pore size distribution, and high sorption capability of these pollutants in water and soil environments. Application conditions, biochar feedstock, pyrolysis conditions and precursor materials are the factors that influence the capacity and functionality of biochar to adsorb pollutants from wastewater and soil. These factors, when improved, can benefit biochar in agrochemical and heavy metal remediation from various environments. However, the processes involved in biochar production and their influence in enhancing pollutant sequestration remain unclear. Therefore, this paper throws light on the current strategies, operational conditions, and sequestration performance of biochar and biochar-based composites for agrochemical and heavy metal in soil and water environments. The main challenges associated with biochar preparation and exploitation, toxicity evaluation, research directions and future prospects for biochar in environmental remediation are also outlined.

Nanofertilizers for agricultural and environmental sustainability

Indiscriminate use of chemical fertilizers in the agricultural production systems to keep pace with the food and nutritional demand of the galloping population had an adverse impact on ecosystem services and environmental quality. Hence, an alternative mechanism is to be developed to enhance farm production and environmental sustainability. A nanohybrid construct like nanofertilizers (NFs) is an excellent alternative to overcome the negative impact of traditional chemical fertilizers. The NFs provide smart nutrient delivery to the plants and proves their efficacy in terms of crop productivity and environmental sustainability over bulky chemical fertilizers. Plants can absorb NFs by foliage or roots depending upon the application methods and properties of the particles. NFs enhance the biotic and abiotic stresses tolerance in plants. It reduces the production cost and mitigates the environmental footprint. Multitude benefits of the NFs open new vistas towards sustainable agriculture and climate change mitigation. Although supra-optimal doses of NFs have a detrimental effect on crop growth, soil health, and environmental outcomes. The extensive release of NFs into the environment and food chain may pose a risk to human health, hence, need careful assessment. Thus, a thorough review on the role of different NFs and their impact on crop growth, productivity, soil, and environmental quality is required, which would be helpful for the research of sustainable agriculture.

Alginate-based nano-adsorbent materials - Bioinspired solution to mitigate hazardous environmental pollutants

Population growth and industrialization is associated with the elevation of hazardous pollutants, including heavy metals, biomedical wastes, personal-care products, endocrine-disrupters, pharmaceutically active compounds, and colorants in the environment. The scientific focus has been devoted to developing novel adsorbents to mitigate hazardous pollutants by constructing hybrids of different polymers and nano-structured materials for improved workability and physicochemical attributes. Recently, much attention has been devoted to nanomaterials in environmental remediation, owning to their exceptional characteristics including novel electrical/chemical features, quantum size effects, tunable functionalization, high scalability, and surface-area-to-volume ratio. Target-specific designing of nanocomposites impart high functionality. The cost-effective and eco-friendly synthesis of bioadsorbent materials is increasing for the removal of hazardous pollutants. Due to biocompatible, biodegradable, and eco-friendly nature, sodium alginate has been widely reported for the preparation of bioadsorbent materials to remove different inorganic/organic pollutants. In this review, the potentialities of alginate-based nanocomposites have been described for environmental remediation purposes. Different nanomaterials, including silica, metallic oxide, graphene oxide, hybrid inorganic-organic, non-magnetic-magnetic, carbon nanorods, nanotubes, polymeric nanocarriers, and several other materials have been described in combination with alginate biopolymer for environmental remediation.