Heavy metals in drinking water: Occurrences, implications, and future needs in developing countries

Application of water safety planning to improve drinking water safety in an Arctic community - a case study in Cambridge Bay, Nunavut

Water safety planning is a risk management approach that accounts for quantitative and qualitative drinking water hazards and includes ongoing input from stakeholders. This approach has been applied in jurisdictions across the world including Canada. Rural and remote communities in Canada, impacted by water safety, stand to benefit most from holistic approaches to water safety risk management such as water safety planning. Unfortunately, these communities typically have limited resources to engage in this approach. Additionally, most remote communities rely on truck and cistern water systems, which have less understood hazards than communities in Canada with piped service. In this study, we report the results of an initial water safety planning case study in Cambridge Bay, Nunavut. We identified numerous water quality hazards including disinfection byproducts in trucks, manganese in the source water, and copper in tap water, as well as operational challenges that increase the risk of water emergencies in the community. We conclude that water safety planning has the potential to substantially improve water safety in Nunavut but current information gaps as well as complex stakeholder interactions are likely to hinder top-down attempts. A dynamic and inclusive approach is recommended that incorporates a targeted exploration of water safety hazards.

Carbon nanomaterials for co-removal of antibiotics and heavy metals from water systems: An overview

Pollution resulting from the combination of antibiotics and heavy metals (HMs) poses a significant threat to human health and the natural environment. Adsorption is a promising technique for removing antibiotics and HMs owing to its low cost, simple procedures, and high adsorption capacity. In recent years, various novel carbon nanomaterials have been developed, demonstrating outstanding performance in simultaneously removing antibiotics and HMs. This work presents a comprehensive review of carbon nanomaterials (i.e., carbon nanotubes, graphene, resins, and other nanocomposites) for the co-removal of antibiotics and HMs in water systems. The mechanisms influencing the simultaneous removal of antibiotics and HMs include the bridging effect, electrostatic shielding, competition, and spatial site-blocking effects. These mechanisms can promote, inhibit, or have no impact on the adsorption capacity for antibiotics or HMs. Additionally, environmental factors such as pH, inorganic ions, natural organic matter, and microplastics affect the adsorption efficiency. This review also covers adsorbent regeneration and cost estimation. On the laboratory scale, the cost of the adsorption process primarily depends on the chemical and energy costs of adsorbent production. Our assessment highlights that the carbon-nanomaterial-mediated simultaneous removal of antibiotics and HMs warrants comprehensive consideration from both economic and environmental perspectives.

Development of a highly sensitive PbrR-based biosensor via directed evolution and its application for lead detection

The Whole-cell biosensor (WCB) is a convenient and practical assay that can monitor bioavailable lead (Pb) contamination. However, existing Pb-responsive WCB struggle to meet practical detection needs due to the lack of sensitivity, specificity, and stability. In this study, we developed a Pb WCB using the Pb resistance transcriptional regulatory factor (PbrR) and green fluorescent protein (GFP), and improved its performance by directed evolution in conjunction with fluorescence-activated cell sorting (FACS). After 3 rounds of screening, we acquired a biosensor mutant (PbrR-E3). The evolved biosensor exhibited an approximately 11-fold increase in maximum fluorescence output signal compared to the non-evolved biosensor, resulting in an improvement of its sensitivity and specificity. This biosensor demonstrated a limit of detection (LOD) of 0.045 μg/L. Furthermore, the evolved biosensor showcased outstanding performance in the detection of Pb(II) in tea infusion and also demonstrated good stability in tests with spiked real water samples. These results highlight the potential of the evolved WCB as a viable approach for monitoring Pb.

Compositions and concentrations of dissolved organic matter, selected elements and anions in German drinking waters

Dissolved organic matter (DOM) in water resources can lead to various drinking water quality issues, including undesirable color, taste, and odor, while also enhancing the mobility of heavy metals and promoting the formation of disinfection byproducts. This study investigated DOM concentrations and compositions in German drinking waters using fluorescence spectroscopy and size-exclusion chromatography coupled with organic carbon detection (LC-OCD). Additionally, the occurrence of selected elements and other inorganic ions were studied. Eighty-nine (89) drinking water samples were collected with the help of residents across Germany. The study revealed that DOM concentrations ranged from 0.3 to 5.7 mg/L, primarily due to humic substances. DOM fractions identified using LC-OCD and fluorescence spectroscopy showed a correlation, indicating that an increase in organic carbon resulted in an increase in fluorescent DOM, as expected due to the aromatic character of humic substances. Heavy metal concentrations in drinking waters were below the regulatory limits set by the German Drinking Water Ordinance (TrinkwV) for safe drinking water, except for one example of a lead concentration, which was 16.2 μg/L. No specific relation was found between the sources of drinking water (including surface water, groundwater, and bank filtrate) and the concentration and composition of DOM, as well as the occurrence of heavy metals. However, correlations between vanadium and chromium, nickel and lead, calcium and magnesium, and calcium and sulfate suggested that these components may share common sources or exhibit similar geochemical behaviors.

Removal of hexavalent chromium and pentavalent arsenic from aqueous solutions by adsorption on polyethylenimine-modified silica nanoparticles

Chromium and arsenic are commonly found in water and wastewater as hexavalent chromium, Cr(VI), and inorganic arsenic species, such as pentavalent arsenic, As(V). In aqueous media, both Cr(VI) and As(V) exist predominantly in the form of oxy-anions. In our study, we prepared a polyethylenimine-silica composite material (SiO₂-PEI) as an adsorbent to study the adsorption capacity for chromate and arsenate ions. Polyethylenimine (PEI) can effectively bind negatively charged species through electrostatic interactions. The parameters that were evaluated, regarding the adsorption capacity were the effect of pH, the effect of the initial concentration of Cr(VI) and As(V), and the presence of other anions. Also, we examined the effect of Cr(VI) and As(V) on each other by studying the simultaneous removal of chromate and arsenate ions. Isotherm, kinetic, and thermodynamic analyses on the experimental data obtained were conducted. The results showed that the pH of the solution is affecting the charge density of PEI, and at pH 4, the lower value that was examined, the SiO₂-PEI exhibited higher adsorption capacity. The presence of other anions, such as phosphate, nitrate, and sulfate ions, had an adverse effect on the adsorption capacity of the SiO₂-PEI material for both chromate and arsenate ions. The adsorption capacity of arsenate was more affected by the presence of other anions compared to the chromate, and the higher impact was observed by the sulfate ions at pH 4, on the contrary for the chromate ions the higher impact was observed by the sulfate ions at pH 7 and by the phosphate ions at pH 4. Concerning the effect of temperature, the adsorption is an exothermic process and it was more favorable at lower environmental temperature. The study of simultaneous removal of Cr(VI) and As(V) declares the material's ability to accommodate both types of ions without requiring separate treatment steps. Addressing the simultaneous removal is essential for reducing the complexity of water treatment systems, lowering operational costs, and improving the safety of treated water.

Screening, identification, and application of anaerobic ammonia oxidizing bacteria in activated sludge systems: A comprehensive review

Anaerobic ammonium oxidation (Anammox) has garnered significant attention due to its ability to eliminate the need for aeration and supplementary carbon sources in biological nitrogen removal process, relying on the capacity of anaerobic ammonium oxidizing bacteria (AnAOB) to directly convert ammonium and nitrite nitrogen into nitrogen gas. This review consolidates the latest advancements in AnAOB research, outlining the mechanisms and enzymatic processes of Anammox, and summarizing the molecular biological techniques used for studying AnAOB, such as 16s rRNA sequencing, qPCR, and metagenomic sequencing. Additionally, it also overviews the currently identified AnAOB species and their distinct metabolic traits, while consolidating strategies to improve their performance. It further delineates coupled processes that utilize Anammox technology, offering practical insights for process selection. Eventually, the review concludes by suggesting future research directions and highlighting critical areas for further investigation. This review serves as a theoretical reference for the enrichment and cultivation of AnAOB, environmental impact management, and the selection of effective treatment processes.

Tb-based Metal-Organic Framework-Referenced Fluorescence Assay for Distinguishing Hydroquinone from Its Isomers and Subsequent Quantitative Visual Detection of Cu2

Hydroquinone (HQ) and copper ions (Cu2+) are categorized as environmental pollutants that are severely limited in water. Designing a selective assay for discriminating HQ from its two isomers and the convenient determination of Cu2+ is of great importance. Herein, a Tb-based metal-organic framework (Tb-MOF) and HQ are assembled innovatively into a ratiometric fluorescence nanoprobe to selectively distinguish HQ and subsequent quantitative visual detection of Cu2+. The native blue emission of HQ at 338 nm is used as a response signal, while Tb-MOF with green fluorescence offers a reference signal at 545 nm. Notably, neither resorcinol (RC) nor catechol (CC) exhibits obvious emission under the same experimental conditions, which enables discriminating HQ from its isomers. Thus, a ratiometric fluorescence method has been designed for the selective detection of HQ with the fluorescence intensity ratio F338/F545 as the readout. The redox reaction between HQ and Cu2+ induces fluorescence quenching of HQ and no change to that of Tb-MOF, resulting in a noticeable color variation from blue-green to green via the naked eye. Furthermore, sensitive visual detection of Cu2+ is achieved with a low detection limit of 1.67 μM using a smartphone. The satisfactory recoveries and good repeatability of quantitative visualization determined in spiked water samples make this sensing platform suitable for on-site monitoring of environmental samples.

Groundwater Contamination: Study on the Distribution and Mobility of Metals and Metalloids in Soil and Rocks

This study investigates the distribution and mobility of metals and metalloids (M&Ms) in soils, rocks, and groundwater within the geologically complex southwestern region of Sicily. The study aims to highlight how natural sources, like rocks and soils, can release elements potentially harmful to human health. It underlines their dual role as both natural reservoirs and active sources of M&M release, driven by leaching processes influenced by physicochemical factors such as pH and redox potential (Eh). Lithological characteristics significantly influence the retention and release of elements, with clay-rich formations exhibiting higher immobilization capacity. However, environmental parameter variations can enhance element mobilization, increasing bioavailability and the risk of groundwater contamination. Water quality analyses reveal regulatory exceedances for As, B, Ni, and Be, underscoring potential health and ecological risks. Concurrently, microbiological investigations identify diverse microbial communities capable of altering the oxidative states of specific elements through oxidation and reduction processes, further influencing their mobility. This study underscores the importance of understanding natural sources of M&Ms and their interactions with geochemical and microbiological processes for effective environmental risk assessment. The findings provide a foundation for developing integrated and sustainable water resource management strategies to mitigate contamination risks and safeguard ecosystems and public health.

Retention behavior of Hg2+, MeHg+, thimerosal and phenylmercuric acetate on a C18 RP-HPLC column

Humans are exposed to potentially toxic mercuric mercury (Hg2+) and methylmercury (MeHg+) by the ingestion of food, to the bactericidal vaccine additive thimerosal (THI), and/or to the antifungal compound phenylmercuric acetate (PMA) which is used in some lens cleaning ophthalmic fluids. While numerous HPLC methods have been developed to separate Hg2+ and MeHg+ in environmental samples (e.g. food, surface waters), comparatively few have been reported for THI and PMA, in part owing to their increased hydrophobicity. We investigated the retention behavior of Hg2+, MeHg+, THI and PMA on a reversed-phase (RP) HPLC column using a flame atomic absorption spectrometer (FAAS) as a Hg-specific detector. Mobile phases comprised of 50 mM phosphate buffer (pH 7.4) with acetonitrile (ACN) concentrations of 30-50 % (v:v) produced single Hg-peaks, which eluted in the order THI, Hg2+, MeHg+ and PMA. With the 50 % ACN mobile phase, all mercurials eluted within 5 min. While the utilization of a FAAS precludes the analysis of environmental waters with the developed RP-HPLC-FAAS method, the latter is useful to probe the stability of THI and PMA in the presence of physiologically relevant concentrations of salt (100 mM in blood plasma) and l-cysteine (0.5 mM in hepatocyte cytosol), which is important as both mercurials have been recently shown to effectively inhibit the main protease of SARS-CoV-2, though the actual inhibitory Hg-species is unknown.

Fluorescent cellulose nanofibrils hydrogels for sensitive detection and efficient adsorption of Cu2+ and Cr6

Increasing chromium and copper pollution poses a significant threat to the global environment and human health. It is crucial to detect and remove Cu (II) and Cr (VI) from water. Cellulose nanofibrils (CNF)-based hydrogels were a natural, abundant, and biocompatible material that has attracted great attention for bio adsorption applications. In this work, a new fluorescent CNF-based hydrogel (PAA-CNF-W) was prepared for the high-efficiency adsorption and sensitive detection of Cu (II) and Cr (VI). CNF was introduced as a natural backbone to construct a three-dimensional porous structure, which increased the specific surface area and provided additional active sites, exhibiting excellent adsorption properties for Cu (II) (159.24 mg/g) and Cr (VI) (173.87 mg/g). Moreover, the synthesized dansyl chloride derivatives with fluorescent properties were introduced to the hydrogel and formed chelates with the metals leading to fluorescence quenching. PAA-CNF-W hydrogels showed high sensitivity to the detection limit (LOD) of Cu (II) (28.70 mg/L) and Cr (VI) (1.45 mg/L). The kinetic study revealed that pseudo-second order kinetics was the best-fitting model. The Langmuir isotherm was the best adjustment model. The study provides a new idea for efficient detection and removal of Cu (II) and Cr (VI) from wastewater by cellulose materials.

Comparative analysis of heavy metals toxicity in drinking water of selected industrial zones in Gujranwala, Pakistan

Heavy metal contamination of drinking water, primarily driven by industrial activities, represents a critical challenge, with implications for human health and environmental safety. Gujranwala is an industrial and thickly populated city. The current study aimed to assess and compare heavy metal contamination levels in drinking water from five industrial areas and evaluate their potential impacts on human health. Total 100 water samples were collected and analysed for physicochemical parameters and heavy metals. Zonal variations in heavy metal concentrations revealed that Zone 2 had the highest mean levels of cadmium (0.331 mg/L), lead (0.573 mg/L), chromium (0.164 mg/L), arsenic (0.042 mg/L), and aluminium (0.484 mg/L), while Zone 4 showed elevated mean levels of iron (1.88 mg/L) and mercury (0.259 mg/L). Spearman correlation analysis among heavy metals revealed positive relationships among several heavy metals with As notably showing a strong correlation with Hg (0.701**). Kruskal-Wallis test revealed significant spatial variation (p < 0.05) in parameters like pH, EC, TDS, and heavy metals (Cd, Pb, Fe, Cu, Mn, Al), indicating spatial heterogeneity across zones. Spatial distribution maps also depicted heavy metal elevated concentrations of Cd, Pb, Fe, Cr, As, and Hg exceeding in Zone 2 (Engineering industries zone) and 4 (Iron and steel industries zone). The findings revealed a strong link between elevated heavy metal levels and health risks, including dermatological, respiratory, gastrointestinal, and neurological disorders. This study highlights the need for stricter wastewater management, regular monitoring of drinking water, and policies to address water toxicity in industrial premises and to protect public health.

Heavy metals in sediments of the river-lake system in the Dianchi basin, China: Their pollution, sources, and risks

The accumulation of heavy metals in river and lake sediments in basins seriously threatens ecological safety and human health. To manage the basin effectively, it is crucial to understand pollution levels and identify and quantify the sources and risks of heavy metals in rivers and lakes separately for targeted control. In this study, 34 sediment samples were collected from the Dianchi Basin, China, and the pollution, sources, and risks in the river-lake system sediments were systematically analysed for cadmium (Cd), chromium (Cr), arsenic (As), mercury (Hg), lead (Pb), copper (Cu), zinc (Zn), and nickel (Ni). The results showed that at least half of the heavy metals in the lakes and rivers exceeded the local soil background values during the flood and dry seasons. Heavy metal concentrations were generally higher in the lakes, with high concentrations in the lakes and nearby rivers. Through positive matrix factorisation and Geodetector traceability discovery, agricultural activities were found to be the main source of heavy metals in river sediments, whereas urban activities were the main source in lake sediments. Ecological risk assessments indicated that Hg and Cd were the main risk factors, causing pollution in lakes due to atmospheric deposition and traffic emissions and moderate pollution in rivers due to atmospheric deposition and agricultural production. Health risk assessments revealed that As and Ni were the main carcinogenic risks, originating from human and industrial activities in lakes, and from agricultural and natural sources in rivers. Children faced higher carcinogenic risks than adults, possibly because of their behaviour and physiology. Overall, the presence of heavy metals, along with their ecological and health risks, was significantly higher in the lakes than in the rivers. This study provides a comprehensive overview of the pollution, sources, and risks of eight heavy metals in the river-lake system of the Dianchi Basin.

Influence of pyrolysis time on removal of heavy metals using biochar derived from macroalgal biomass (Oedogonium sp.)

In this study, pyrolysis was performed at different times to convert Oedogonium biomass into biochar. The physicochemical properties show that the pyrolysis time significantly impacts structural and morphological changes in biochar samples. The influence of pyrolysis time on the removal of multiple heavy metals was investigated. Owing to the presence of abundant functional groups, inorganic minerals and porous nature, biochar obtained from a 40 min pyrolysis time showed higher removal efficiency of heavy metals compared to biochars pyrolyzed at 20 mins and 60 mins even with higher concentrations of metal ions. The maximum adsorption capacity was observed 9.33, 10.74, 322.58, 13.70 and 9.11 mg/g with the biochar prepared at the pyrolysis time of 40 mins for Co, Ni, Cu, Zn and Cd, respectively. The adsorption isotherm is well fitted with the Langmuir adsorption model for heavy metals adsorption, and the kinetic study is well-defined by a pseudo second-order model.

A critical review on the removal of lead (heavy metal) by using various adsorbents from aqueous solution

One of the biggest problems globally is the presence of lead in water resources. Due to increased Industrialization, the presence of the heavy metal lead in the environment is a severe worry. Excessive lead poisoning harms all the aquatic systems, which poses a concern for human health and damages this ecosystem through eutrophication. Various techniques are used to collect and remove lead from wastewater to protect aquatic bodies. Adsorption is among the finest methods for eliminating lead from wastewater since it is easy to use, effective, universal, inexpensive, and environmentally friendly. Adsorption is one of the most efficient and effective techniques employed even at low temperatures, as we will explore in this paper. The removal of lead (heavy metal) by adsorption utilizing various adsorbents, including cellulose, industrial by-products, forest wastes, and biotechnology wastes, was evaluated in this paper at various levels from the numerous research and literature. Then, various adsorbent types were assessed in terms of removal efficiency, adsorption capacity, temperature, optimal pH, sorbent dose, and contact time. The paper also examines or researches adsorbent concentration, critical studies, and lead removal percentage. The growth of low-cost adsorbents offers challenges for lead recovery and removal in the near and far future.

Comprehensive insights into the application of graphene-based aerogels for metals removal from aqueous media: Surface chemistry, mechanisms, and key features

Efficient removal of heavy metals and other toxic metal pollutants from wastewater is essential to protect human health and the surrounding vulnerable ecosystems. Therefore, significant efforts have been invested in developing practical and sustainable tools to address this issue, including high-performance adsorbents. In this respect, within the last few years, graphene-based aerogels/xerogels/cryogels (GBAs) have emerged and drawn significant attention as excellent materials for removing and recovering harmful and valuable metals from different aqueous media. Such an upward trend is mainly due to the features of the aerogel materials combined with the properties of the graphene derivatives within the aerogel's network, including the GBAs' unique three-dimensional (3D) porous structure, high porosity, low density, large specific surface area, exceptional electron mobility, adjustable and rich surface chemistry, remarkable mechanical features, and tremendous stability. This review offers a comprehensive analysis of the fundamental and practical aspects and phenomena related to the application of GBAs for metals removal. Herein, we cover all types of (bottom-up) synthesized GBAs, including true microporous graphene-based aerogels as well as other 3D graphene-based open-cell interconnected mesoporous and macroporous aerogels, foams, and sponges. Indeed, we provide insights into the fundamental understanding of the GBAs' suitability for such an important application by revealing the mechanisms involved in metals removal and the factors inducing and controlling the highly selective behavior of these distinctive adsorbents. Besides conventional adsorptive pathways, we critically analyzed the ability of GBAs to electrochemically capture metal pollutants (i.e., electrosorption) as well as their efficiency in metals detoxification through reductive mechanisms (i.e., adsorption-reduction-readsorption). We also covered the reusability aspect of graphene aerogels (GAs)-based adsorbents, which is strongly linked to the GBAs' outstanding stability and efficient desorption of captured metals. Furthermore, in view of their numerous practical and environmental benefits, the development and application of magnetically recoverable GAs for metals removal is also highlighted. Moreover, we shed light on the potential practical and scalable implementation of GBAs by evaluating their performance in continuous metals removal processes while highlighting the GBAs' versatility demonstrated by their ability to remove multiple contaminants along with metal pollutants from wastewater media. Finally, this review provides readers with an accessible overview and critical discussion of major recent achievements regarding the development and applications of GAs-based adsorbents for metal ions removal. Along with our recommendations and suggestions for potential future work and new research directions and opportunities, this review aims to serve as a valuable resource for researchers in the field of wastewater treatment and inspire further progress towards developing next-generation high-performance GBAs and expanding their application.

Efficient removal of low concentrations of copper and lead ions in water using chitosan-condensed tannin composite microspheres

Condensed tannin was solidified onto chitosan microspheres to prepare chitosan-tannin (CT) composite microspheres with a simple preparation method to study its performance in adsorbing copper (Cu2+) and lead ions (Pb2+) in aqueous media. The study investigated the influence of the mass ratio of tannin and chitosan, pH value, adsorption time, and initial concentrations of Cu2+ and Pb2+ on the adsorption capacity of Cu2+ and Pb2+ ions. Additionally, the study examined the adsorption isotherms and kinetics of Cu2+ and Pb2+ on CT composite microspheres. The adsorption process aligns more closely with the fitting results of the Langmuir model. The maximum capacity for saturated monolayer adsorption of CT composite microspheres for Cu2+ and Pb2+ was 37.6 and 52.9 mg/g, respectively. The adsorption process of CT composite microspheres for Cu2+ and Pb2+ was primarily driven by single-layer chemical adsorption. In addition, metal ions adsorbed onto CT composite microspheres can be released by treating them with a dilute solution of strong acid. Furthermore, the CT composite microspheres exhibited impressive removal efficiencies of 82 % and 95 % for Cu2+ and Pb2+ respectively, even at low concentrations of 2 mg/L. The CT composite microspheres have the ability to easily separate the adsorbed Cu2+ and Pb2+ ions.

The emerging application of LC-based metallomics techniques to unravel the bioinorganic chemistry of toxic metal(loid)s

The on-going anthropogenic emission of toxic metal(loid) species into the environment contaminates the food supply and drinking water resources in various parts of the world. Given that inorganic pollutants cannot be degraded, their increased influx into the bloodstream of babies, children and pregnant women is inevitable. Since the ramifications of the ensuing environmental exposure on human health remain poorly defined, fundamentally new insight into their bioinorganic chemistry in organisms is urgently needed. Based on the flow of dietary constituents through organisms, the interaction of toxic metal(loid) species with biomolecules in the bloodstream deserve particular attention as they play an integral role in the mechanisms of their chronic toxicity. Gaining insight into these bioinorganic processes is hampered by the biological complexity of plasma/red blood cells and the low concentrations of the metal(loid) species of interest, but can be overcome by employing LC techniques hyphenated to atomic spectroscopic detectors (i.e. metallomics techniques). This perspective aims to highlight the potential of unconventional hyphenated separation modes to advance our understanding of the bioinorganic chemistry of toxic metal(loid) species in the bloodstream-organ system. Four examples are illustrated. The application of anion-exchange (AEX) and size-exclusion chromatography (SEC) provided new insight into the blood-based bioinorganic mechanisms that direct Cd2+ and MeHg+ to target organs. AEX chromatography also allowed to observe the formation of complexes between Hg2+ and MeHg+ with L-cysteine at pH 7.4, that are implicated in their organ uptake. Lastly, the application of reversed phase (RP) chromatography revealed a possible cytosolic mechanism by which N-acetyl-L-cysteine binds to MeHg+ in the presence of cytosolic glutathione (GSH). New insight into other bioinorganic processes may advance the regulatory framework to better protect public health.

Fully autonomous water monitoring by plant-inspired robots

Developing countries struggle with water quality management owing to poor infrastructure, limited expertise, and financial constraints. Traditional water testing, relying on periodic site visits and manual sampling, is impractical for continuous wide-area monitoring and fails to detect sudden heavy metal contamination. To address this, plant-inspired robots capable of fully autonomous water quality monitoring are proposed. Constructed from paper, the robot absorbs surrounding water through its roots. This paper robot is controlled by paper-based microfluidic logic that sends absorbed water to petal-shaped actuators only when the water is polluted by heavy metals. This triggers the actuators to swell and bend like a blooming flower, visually signaling contamination to local residents. In tests with copper-contaminated water, the robotic flower's diameter increased from 4.69 cm to 14.89 cm, a more than threefold expansion (217.25 %). This significant blooming movement serves as a highly visible and easily recognizable indicator of water pollution, even for the public. Furthermore, the paper robot can be mass-produced at a low cost (∼$0.2 per unit) and deployed over large areas. Once installed, the paper robot operates autonomously using surrounding water as a power source, eliminating the need for external electrical infrastructure and expert intervention. Therefore, this autonomous robot offers a new approach to water quality monitoring suitable for resource-limited environments, such as Sub-Saharan Africa.

Synthesis and Characterization of Mesoporous Materials Functionalized with Phosphinic Acid Ligand and Their Capability to Remove Cd(II)

This article presents a study of cadmium removal from nitrate medium using adsorption in calcined mesoporous silica (MCM-C), mesoporous silica doped (MCM_DIOPA), and calcined and impregnated mesoporous silica (MCM@DIOPA), with diisooctylphosphinic acid (DIOPA). The sorbents were synthesized via a sol-gel method. Several characterization techniques, such as XRD, FTIR spectroscopy, N2 sorption and elemental analysis, have been used to determine the main structural, textural, and chemical properties of prepared sorbents. Batch adsorption and kinetics tests were carried out, where the influence of pH and contact time of the sorbents and their role in cation removal were studied. Experimental results show poor sorption efficiencies with MCM-C and MCM_DIOPA at pH 5.85. At the same pH, better cadmium extraction was attained by MCM@DIOPA and was achieved within 30 min. The pseudo-second-order model is the most appropriate model to describe the elimination mechanism of Cd(II) ions. The Langmuir equation was used to model the sorption isotherm and the maximum sorption capacity of Cd(II) is 22.16 mg/g (200 mmol/kg). The complex type of the probable extracted species isCdL2-HL.

Assessment of heavy metal contamination in groundwater and its implications for dental and public health

Groundwater contamination with heavy metals is a critical environmental issue, especially in regions heavily reliant on groundwater for drinking purpose. These metals can seep into groundwater from soil and rock weathering or through improper disposal of industrial waste and effluents. Access to safe drinking water is essential for maintaining public health. This study aimed to assess heavy metal contamination in groundwater and its implications for dental and public health. The objective of the study was to measure the concentration of the heavy metals in the dentine of extracted tooth of the study population. The study concurrently measured heavy metal concentrations in groundwater and tooth dentine samples, analyzing demographic profiles, heavy metal correlations, and underlying structures using Principal Component Analysis (PCA). The average level of heavy metals in the groundwater samples varied from 9.763 ± 3.362 μg/L for Cd to 3426.204 ± 875.264 μg/L for Fe. The mean concentrations (μg/g) in teeth dentine showed significant variations, with iron (Fe) ranging from 0.149 ± 0.03 μg/g in water purifiers to 4.62 ± 0.578 μg/g in local water sources. Similar variations were observed for other heavy metals across different water sources. Principal component analysis (PCA) revealed seven principal components, with the first two components explaining 96.1% of the total variance. The findings revealed varied concentrations of heavy metals across all water sources. Statistical analyses underscored the complex relationship between water sources and heavy metal contamination levels, highlighting the need for targeted interventions to improve water quality and mitigate health risks. The study highlights the urgent need for monitoring and mitigation efforts to ensure safe drinking water and mitigate health risks associated with heavy metal contamination.

Which organic contaminants should be paid more attention: Based on an improved health risk assessment framework

The increasing chemical pollution of the drinking water is widely concerned. Large number of organic contaminants cannot be removed by conventional water treatment technology due to their low concentration, and long-term exposure may pose significant risks to human health. Which organic contaminants in drinking water should be given more attention has been a topic of great concern in recent years. To identify the organic contaminants that need attention, this research proposes an improved health risk screening method to quantitatively analyze the risks of accumulation, persistence, toxicity, and antibiotic resistance. Compared with conventional method, 26 compounds were added to the improved screening list, including 9 DBPs (e.g., NDMA), 3 antibiotics (e.g., oxytetracycline), PFNA and other compounds. Overall, antibiotics and plasticizers rose in the risk rankings. From the perspective of the proportion of total risk value, a single risk plays a decisive role (more than 99%) in the ranking. This change suggests that antibiotic resistance and the accumulation of organic matter are as important as their toxic risks to humans. 58 compounds were recommended for the priority control organic contaminants list in drinking water. This list provides the necessary information for authoritative regulations to monitor, control, assess, and manage the risks of environmentally relevant compounds in drinking water in China.

Fill, Fold, Photo: Preconcentration and Multiplex Detection of Trace Level Heavy Metals in Water

Heavy metal contamination is an increasing global threat to human and environmental health, particularly in resource-limited areas. Traditional platforms for heavy metal detection are labor intensive and expensive and require lab facilities. While paper-based colorimetric sensors offer a simpler approach, their sensitivity limitations prevent them from meeting legislative requirements for many metals. Existing preconcentration systems, on the other hand, can achieve lower detection limits but typically focus on analyzing only one metal, making comprehensive monitoring difficult. We address these limitations by introducing a low-cost preconcentration system coupled with colorimetric analysis for the simultaneous detection of seven metal ions at low ppb levels without the need for external equipment outside a smartphone. The system achieved detection limits of 15 ppb (Ni(II)), 7 ppb (Cu(II)), 2 ppb (Fe(III)), 20 ppb (Cr(VI)), 13 ppb (Pb(II)), 26 ppb (Hg(II)), and 15 ppb (Mn(II)) with six out of seven limits of detection values falling well below EPA regulatory guidelines for drinking water. The user-friendly Fill, Fold, Photo approach eliminates complex pretreatment steps. Smartphone-based detection offers portable quantification within seconds. Employing masking strategies ensured higher selectivity for each assay on the card, while our packaging protocols enable system stability for over 4 weeks of study, facilitating mass production and deployment within a realistic time frame. To validate the sensor's performance in real-world scenarios, the sensor was tested with environmental water samples. The sensor demonstrated good recovery, ranging from 77% to 94% compared to the standard ICP-MS method. Furthermore, spike recovery analysis confirmed the sensor's accuracy, with a relative standard deviation (RSD) of less than 15%. This technology holds significant promise for future development as a convenient, portable solution for field-based monitoring of a broad spectrum of water contaminants, including pesticides, PFAS, fertilizers, and beyond.

Confined within a sugarcane monoculture: A participatory assessment of water pollution and potential health risks in the community of El Tiple, Colombia

Communities neighboring monoculture plantations are vulnerable to different forms of pollution associated with agro-industrial operations. Herein, we examine the case of El Tiple, a rural Afro descendant community embedded within one of the largest sugarcane plantations in the Americas. We implemented a participatory approach to assess water pollution, exposure via water ingestion, and non-carcinogenic health risks associated with the use of local water sources available to the community. We conducted household surveys to unveil demographic characteristics and family dynamics linked to water consumption. Additionally, we measured water quality parameters and assessed the concentration glyphosate, its major metabolite (aminomethylphosphonic acid) and metals and metalloids. Drinking water El Tiple households is sourced from three primary sources: the local aqueduct system, water delivery trucks, and private deep wells. Tests on water samples from both the local aqueduct and delivery trucks showed no traces of pesticides, metals, or metalloids surpassing regulatory limits set by Colombian or EPA standards. However, we found concentration of contaminants of primary concern, including mercury (up to 0.0052 ppm) and lead (up to 0.0375 ppm) that exceed the permissible regulatory thresholds in water from groundwater wells. Residents of the peripheric subdivisions of El Tiple are four times more reliant on well water extraction than residents of the central area of the town due to lack of access to public drinking water and sanitation infrastructure. Finally, adult women and school-age children have a higher health risk associated with exposure to local pollutants than adult men due to their constant presence in the town. We conclude that expanding the coverage of clean water and sanitation infrastructure to include all households of the community would be the most recommended measure to minimize exposure and risk via ingestion of water pollutants.

Revolutionizing waste: Harnessing agro-food hydrochar for potent adsorption of organic and inorganic contaminants in water

Constant pollution from a wide range of human activities has a negative impact on the quantity and quality of the planet's water resources. On the other hand, agro-food waste can impact climate change and other forms of life, in addition to having social, economic, and environmental consequences. However, as a result of their inherent physicochemical properties and lignocellulosic composition, these residues are becoming increasingly recognized as valuable products in line with government policies advocating zero waste and circular economies. An advantageous way to convert these wastes into energy and chemicals is hydrothermal carbonization (HTC). This review highlights the valorization of agro-food waste into hydrochar-based adsorbents for the elimination of organic and inorganic contaminants from aqueous environments. An overview of the toxicity of pollutants in aqueous environments, food waste management, as well as HTC technology was initially proposed. Then, a discussion on the conversion of major agro-food wastes into contaminant adsorbents was given in detail. Adsorption mechanisms as well as the possibility of reuse of adsorbents were also discussed. Enhanced properties of the produced materials enable them to provide competent solutions to various ecological contexts, including removing pollutants from wastewater with cost-effectiveness and satisfactory results. Besides addressing environmental concerns, this sustainable approach opens the door for more environmentally-friendly and resource-efficient applications in the future, making it an exciting prospect.

Hydrochar as a bio-based adsorbent for heavy metals removal: A review of production processes, adsorption mechanisms, kinetic models, regeneration and reusability

The spread of heavy metals throughout the ecosystem has extremely endangered human health, animals, plants, and natural resources. Hydrochar has emerged as a promising adsorbent for removal of heavy metals from water and wastewater. Hydrochar, obtained from hydrothermal carbonization of biomass, owns unique physical and chemical properties that are highly potent in capturing heavy metals via surface complexation, electrostatic interactions, and ion exchange mechanisms. This review focuses on removing heavy metals by hydrochar adsorbents from water bodies. The article discusses factors affecting the adsorption capacity of hydrochars, such as contact time, pH, initial metal concentration, temperature, and competing ions. Literature on optimization approaches such as surface modification, composite development, and hybrid systems are reviewed to enlighten mechanisms undertaking the efficiency of hydrochars in heavy metals removal from wastewater. The review also addresses challenges such as hydrochar regeneration and reusability, alongside potential issues related to its disposal and metal leaching. Integration with current water purification methods and the significance of ongoing research and initiatives promoting hydrochar-based technologies were also outlined. The article concludes that combining hydrochar with modern technologies such as nanotechnology and advanced oxidation techniques holds promise for improving heavy metal remediation. Overall, this comprehensive analysis provides valuable insights to guide future studies and foster the development of effective, affordable, and environmentally friendly heavy metal removal technologies to ensure the attainment of safer drinking water for communities worldwide.

Elements characteristics and potential environmental risk assessment of jarosite residue and arsenic sulfide residue based on geochemical and mineralogical analysis

The waste slag known as jarosite residue (JR) and arsenic sulfide residue (ASR) were produced following the creation of zinc by hydrometallurgical procedures. The increasing annual zinc mining has led to growing pressure to dispose of the resulting JR and ASR from zinc smelting, making it crucial to assess their environmental impact and feasibility for utilization. The main components, distribution characteristics of elements, and potential environmental risks of zinc smelting wastes are studied through toxicity leaching tests, sequential extraction procedures, and various characterization technologies such as XRF, XRD, and SEM-EDS. The mineral compositions of JR are natrojarosite, franklinite, and gunningite, and zinc mainly adheres to the crevices of the natrojarosite mineral. Meanwhile, the ASR of flocculent structures is composed of orpiment, greenockite, arsenic oxide, and calvertite, and As appears in the form of the S-As-O phase. The Zn, Cu, and Cd in JR were dominated by exchangeable bound (81.53-96.6 %), and the main form of As, Cd, Se, and Tl in ASR was organic matter bound (87.0-99.21 %). The Risk Assessment Code (RAC) method confirmed the risk of Cd, Cu, Zn, and Mo in JR is high, while the risk of Cd, Pb, and Cr in ASR is moderate. Compared to the standard value of "Identification Standard for Toxicity of Hazardous Waste Leaching (GB5085.3-2007)", the leachate concentrations of Zn in JR as well as Cd and As in ASR were exceeded, suggesting that the JR and ASR were in the type of hazardous waste and posed an environmental risk. The study provides theoretical guidance for the future rational management and effective utilization of hazardous waste.

Root-soil-microbiome interaction in the rhizosphere of Masson pine (Pinus massoniana) under different levels of heavy metal pollution

Heavy metal pollution of the soil affects the environment and human health. Masson pine is a good candidate for phytoremediation of heavy metal in mining areas. Microorganisms in the rhizosphere can help with the accumulation of heavy metal in host plants. However, studies on its rhizosphere bacterial communities under heavy metal pollution are still limited. Therefore, in this study, the chemical and bacterial characteristics of Masson pine rhizosphere under four different levels of heavy metal pollution were investigated using 16 S rRNA gene sequencing, soil chemistry and analysis of plant enzyme activities. The results showed that soil heavy metal content, plant oxidative stress and microbial diversity damage were lower the farther they were from the mine dump. The co-occurrence network relationship of slightly polluted soils (C1 and C2) was more complicated than that of highly polluted soils (C3 and C4). Relative abundance analysis indicated Sphingomonas and Pseudolabrys were more abundant in slightly polluted soils (C1 and C2), while Gaiella and Haliangium were more abundant in highly polluted soils (C3 and C4). LEfSe analysis indicated Burkholderiaceae, Xanthobacteraceae, Gemmatimonadaceae, Gaiellaceae were significantly enriched in C1 to C4 site, respectively. Mantel analysis showed that available cadmium (Cd) contents of soil was the most important factor influencing the bacterial community assembly. Correlation analysis showed that eight bacterial genus were significantly positively associated with soil available Cd content. To the best of our knowledge, this is the first study to investigate the rhizospheric bacterial community of Masson pine trees under different degrees of heavy metal contamination, which lays the foundation for beneficial bacteria-based phytoremediation using Masson pines in the future.

Analytical Investigation of Phthalates and Heavy Metals in Edible Ice from Vending Machines Connected to the Italian Water Supply

Edible ice is often produced by special machines that can represent a source of significant chemical and microbiological contamination. In this work, the presence of phthalic acid esters (phthalates, PAEs) and heavy metals in ice cubes distributed by 77 vending machines installed in two different zones in southern Italy and fed by water from the public water supply was investigated. Solid-phase microextraction coupled to gas chromatography-mass spectrometry (SPME-GC/MS) was used to evaluate contamination with four PAEs, which were selected because they are commonly used in the production of food-contact plastics, while inductively coupled plasma mass spectrometry (ICP/MS) was used to quantify the heavy metals. It was found that ice samples, especially those from one of the two considered zones (zone 2), exceeded the dibutyl phthalate (DBP) threshold limit value; some ice cubes from the other zone (zone 1) instead showed levels of both lead (Pb) and nickel (Ni) up to one order of magnitude higher than those observed in samples collected in zone 2 and higher than the maximum permitted values (European Directive n. 2184/2020). Since the water source connected to the ice vending machines was found to be free from significant levels of all considered target compounds and metals, the high levels of DBP, Ni, and Pb in ice cubes could be attributed to the components and/or to the state of repair of the ice vending machines themselves.

Simultaneous removal of Cd(II) and phosphate by nanoscale zero-valent iron from solution: Co-sorption and implication of corrosion

Nanoscale zero-valent iron (nZVI) has been extensively utilized in environmental remediation, but its reactivity in the presence of co-contaminants requires further investigation for effective application in complex environments. Here, we conducted batch removal experiments to systematically investigate the co-removal behaviors of Cd(II) and phosphate by nZVI. Results showed that nZVI can synergistically remove Cd(II) and phosphate in solution, with the removal efficiency of Cd(II) and phosphate in the binary system being approximately 2 and 5 times higher than those in the single system, respectively. Sequential removal experiments combined with characterization analysis revealed the co-sorption of Cd(II) and phosphate onto the corrosion product of nZVI mainly by forming the ternary complexes (≡Fe-P-Cd). The Fe(OH)2 formed as the initial nZVI corrosion product provides numerous active sites for immobilization of Cd(II) and phosphate. Such effective co-sorption of Fe(OH)2 inhibits its subsequent phase transformation to Fe3O4. Overall, our work sheds light on how nZVI, Cd(II), and phosphate interact in solution as well as highlights the influence of phase transformation on co-removal, which can broaden the potential applications of nZVI in the practical environment.

Associations between multiple urinary metals and metabolic syndrome: Exploring the mediating role of liver function in Chinese community-dwelling elderly

BACKGROUND

Multiple metals exposure has been revealed to be related to metabolic syndrome (MetS). However, the associations and interactions between multiple metals exposure and MetS are remains controversial, and the potential mechanism of the above-mentioned is still unclear.

METHODS

The associations between urinary metals and the MetS were analyzed by multivariable logistic regression model and restricted cubic spline (RCS). Bayesian kernel machine regression (BKMR) model and quantile-based g-computation (qgcomp) were applied to explore the mixed exposure and interaction effect of metals. Mediation analysis was used to explore the role of liver function.

RESULTS

In the single metal model, multiple metals were significantly associated with MetS. RCS analysis further verified the associations between 8 metals and MetS. BKMR model and qgcomp showed that zinc (Zn), iron (Fe), and tellurium (Te) were the main factors affecting the overall effect. In addition, mediation analysis indicated that serum alanine aminotransferase (ALT) mediated 21.54% and 13.29% in the associations of vanadium (V) and Zn with the risk of MetS, respectively.

CONCLUSIONS

Elevated urinary concentration of Zn, V, Te, copper (Cu), molybdenum (Mo), and thallium (Tl) were related to the increased risk of MetS. Conversely, Fe and selenium (Se) may be protective factors for MetS in mixed exposure. Liver function may play a key role in the association of V and Zn exposure with MetS.

Enhanced cadmium removal by a magnetic potassium ferrocyanide framework: Performance and mechanism study

Polluted environments often contain large amounts of toxic metals, such as cadmium, which pose a major threat to ecosystems and public health. Contamination by cadmium and its compounds is often observed in areas surrounding zinc mining sites and electroplating factories, and the control of cadmium pollution is essential for environmental safety and health. In this study, a highly efficient and straightforward separation strategy for K4Fe(CN)6@Fe3O4 nanocomposites is successfully developed to capture the Cd ions in the water environment. Batch adsorption experiments revealed that K4Fe(CN)6@Fe3O4 exhibited a high cadmium removal rate (greater than 98 %) at a pH level of 6.0 and solid-liquid ratio of 1.0 g/L at room temperature (298 K). Kinetic analysis revealed that the adsorption process followed a pseudo-second-order model and cadmium was rapidly removed in the first 10 min, with chemisorption dominating the capture of Cd2+ by K4Fe(CN)6@Fe3O4. Adsorption isotherms revealed a heterogeneous adsorption behavior, with a maximum adsorption capacity of 40.78 mg/g. The intrinsic adsorption of Cd2+ by K4Fe(CN)6@Fe3O4 occurring primarily through electrostatic interaction and ion exchange. In addition, K4Fe(CN)6@Fe3O4 exhibited an excellent regeneration capacity. Therefore, integrating Fe3O4 into the metal cyanide not only provided the composite material with excellent chemical stability and selective adsorption sites for Cd2+, but also facilitated subsequent sorbent collection and recovery. Overall, this study presents a simple and feasible approach for integrating Fe3O4 into potassium ferrocyanide frameworks for efficient cadmium removal from contaminated water.

The Chemistry of Chelation for Built Heritage Cleaning: The Removal of Copper and Iron Stains

Chelators are widely used in conservation treatments to remove metal stains from marble, travertine, and limestone surfaces. In the current review the chemical aspects underlying the use of chelators for the removal of copper and iron stains from built heritage are described and clear criteria for the selection of the most efficient stain removal treatment are given. The main chelator structural features are outlined and the operating conditions for effective metal stain removal (pH, time of application, etc.) discussed, with a particular emphasis on the ability to form stable metal complexes, the high selectivity towards the metal that should be removed, and the high sustainability for the environment. Dense matrices often host chelators for higher effectiveness, and further research is required to clarify their role in the cleaning process. Then, relevant case studies of copper and iron stain removal are discussed. On these bases, the most effective chelators for copper and stain removal are indicated, providing chemists and conservation scientists with scientific support for conservation operations on stone works of art and opening the way to the synthesis of new chelators.

Quantitative Effects of Anthropogenic and Natural Factors on Heavy Metals Pollution and Spatial Distribution in Surface Drinking Water Sources in the Upper Huaihe River Basin in China

The water quality of sources in the Huaihe River Basin significantly affects the lives and health of approximately 16.7% of China's population. Identifying and quantifying pollution sources and risks is essential for effective water resource management. This study utilized Monte Carlo simulations and Geodetector to assess water quality and eutrophication, as well as to evaluate the sources of heavy metals and the associated health risks for both adults and children. The results showed that eutrophication of water sources in Huaihe River was severe, with an overall EI value of 37.92; 67.8% of the water sources were classified as mesotrophic and 32.2% classified as eutrophic. Water quality and eutrophication levels in the southern mountainous regions were better than those in the densely populated northern areas. Adults were found to have a higher carcinogenic risk than children, whereas children faced a higher noncarcinogenic risk than adults. Cr presented the highest carcinogenic risk, affecting more than 99.8% of both adults and children at levels above 1 × 10-6 but not exceeding 1 × 10-4. The noncarcinogenic risk from metals did not surpass a level of 1, except for Pb. As was primarily influenced by agricultural activities and transportation, whereas Cd, Cr, and Pb were mainly affected by industrial activities, particularly in local textile industries such as knitting and clothing manufacturing. The analysis demonstrated that the influence of anthropogenic factors on heavy metal distribution was significantly enhanced by indirect natural factors. For example, the explanatory power of Precipitation and Road Network Density on As was 0.362 and 0.189, respectively, whereas their interaction had an explanatory power as high as 0.673. This study indicates that the geodetector method is effective in elucidating the factors influencing heavy metal distribution in water, thereby providing valuable insights into pollution sources in global drinking water.

Heavy metals in Ethiopian drinking water and public health risks: Insights from nationwide and regional analysis

The ambitious sustainable development goal (SDG) 6 of the United Nations, which aims to achieve universal access to safe water and sanitation by 2030, remains elusive for many developing countries like Ethiopia. This is often due to a multitude of intricate factors, including the escalating degradation of water quality. Here, we present a comprehensive nationwide and regional analysis of heavy metal pollution in drinking water sources and the associated human health risks in Ethiopia based on a dataset of 11 heavy metal concentrations (n = 975) collated from available studies. Results indicate significant variations in heavy metal pollution in drinking water sources in Ethiopia, with 44 % of the total concentration exceeding maximum permissible limits. The mean concentrations were ranked as follows: Pb (1.92 mg/L) > Zn (1.25 mg/L) > Fe (0.56 mg/L) > Mn (0.43 mg/L) > Cu (0.40 mg/L) > Co (0.30 mg/L) > As (0.12 mg/L) > Ni (0.12 mg/L) > Cr (0.10 mg/L) > Cd (0.06 mg/L) > Hg (0.04 mg/L). We found that children are more vulnerable to non-carcinogenic health risks than adults, with the highest hazard quotient (HQ) exceedances of up to a factor of 1823 and 762, respectively. Furthermore, a Monte Carlo-based probabilistic risk assessment highlighted significant concerns regarding co-exposure to multiple heavy metals. The measured concentrations, ingestion rates, and exposure frequencies were identified as sensitive parameters. Overall, a higher risk was attributed to Pb and As, with river drinking water sources and the Tigray region requiring immediate mitigation measures. In conclusion, the findings emphasize the urgent need to test and purify water before consumption and to implement effective public health interventions. Furthermore, a multifaceted approach including regular monitoring, source protection, and proper waste management is recommended to expedite the achievement of SDGs and promote water sustainability in resource-limited Ethiopia and sub-Saharan Africa.

Speciation distribution and leaching behavior of heavy metals in coal gasification fine ash: Influence of particle size, carbon content and mineral composition

In this study, the occurrence and distribution of heavy metals in coal gasification fine ash (CGFA) with different particle sizes were investigated to ensure safer disposal and utilization strategies for CGFA. These measures are critical to sustainable industrial practices. This study investigates the distribution and leachability of heavy metals in CGFA, analyzing how these factors vary with particle size, carbon content, and mineral composition. The results demonstrated that larger CGFA particles (>1 mm) encapsulated up to 70 % more heavy metals than smaller particles (<0.1 mm). Cr and Zn were present in higher concentrations in larger CGFA particles, whereas volatile elements such as Zn, Hg, Se, and Pb were found in relatively higher contents in finer CGFA particles. At least 70 % of Hg in CGFA was present in an acid-soluble form of speciation, whereas Cd, Zn, and Pb were mostly present in a reducible form of speciation, which could be attributed to the presence of franklinite. More than 40 % of Cd and Zn in fine CGFA particles exist in an acid-soluble form. With the exception of CGFA_1.18, Se in CGFA mainly existed in an oxidizable form at a ratio of 60 %-80 %. This could be attributed to the presence of bassanite particles as well as the higher affinity of Se for S. In contrast, Cr, Cu, and As were mostly present in residual speciation forms owing to their parasitism in quartz, sillimanite, and amorphous Fe solid solution in CGFA. Additionally, the study revealed that there was no significant relationship between heavy metal content, leaching behavior, and carbon content in CGFA. Based on combined analyses using toxicity characteristic leaching procedure (TCLP) leaching concentrations and risk assessment code (RAC) results, it is recommended to focus on the environmental risks posed by Cd, Cr, Pb, Zn, and Hg in CGFA during their modification and utilization processes.

A novel bioaccessibility-based probabilistic risks assessment of potentially toxic elements (PTEs) in earthworm

Introduction: Early risk assessment studies usually based on total heavy metal (loid) contents, inevitably leading to an overestimation of the health risks. In addition, inputs are represented as single-point estimates in deterministic models, leading to underestimation or overestimation of the health risks. Methods: To overcome these barriers, a novel probabilistic risk assessment strategy based on the combinational use of bioaccessibility and Monte Carlo simulation was developed to assess heavy metal (loid) associated health risks of earthworms in this study. To obtain a realistic and robust probabilistic risk assessment, heavy metal (loid) exposure duration and frequency were determined using our questionnaire data. Results: As a result, the mean gastrointestinal bioaccessibility was in the order: Cd > As > Cu > Hg. The mean hazard index (HI) values for investigated metal (loid)s were 0.65 and 0.59 for male and female, respectively, demonstrating an acceptable health risk in an average community. However, the 90th percentile of HI values was 1.87 and 1.65 for male and female, respectively. And the total non-cancer risks of heavy metal (loid) exposure exceeded the acceptable threshold for 19.9% and 17.8% of male and female, respectively. In addition, the total cancer risk (TCR) value through co-exposure to As and Cd suggested that the carcinogenic risks may be of concern for average exposure population. Sensitivity analyses revealed that the exposure frequency and bioaccessible As concentration were the dominant contributors to the total risk variance, which provided meaningful implications for environmental management. Conclusion: Altogether, the refined strategy based on bioaccessibility and Monte Carlo simulation is the first of its kind, such effort attempts to scientifically guide the rational clinic use of TCM and the improvement of population-health.

Adsorption of cadmium (II) on organic xerogel microspheres: effect of adding sepiolite or vermiculite and operating conditions on the adsorption capacity

The organic xerogel (OX) was synthesized through sol-gel polymerization of formaldehyde and resorcinol in inverse emulsion using Na2CO3 as a catalyst. Meanwhile, OX containing sepiolite (OX-Sep) and vermiculite (OX-Ver) were prepared similarly to OX but adding clays during synthesis. All materials were mesoporous and presented spherical morphology, and the surface of these materials exhibited an acidic character because the concentration of acidic sites was higher than those of basic sites. Cd(II) adsorption from aqueous solutions onto OX, OX-Sep, and OX-Ver was examined, and the OX-Sep showed the highest adsorption capacity towards Cd(II) of 189.7 mg/g, being 1.5, 2, and 36 times higher than that of OX-Ver, OX, and Sep. The OX-Sep capacity for adsorbing Cd(II) was significantly lessened by decreasing the pH from 7 to 4 and raising the ionic strength from 0.01 N to 0.1 N. This trend was ascribed to electrostatic attraction between the Cd+2 in water and the negatively charged surface of OX-Sep. Besides, desorption studies at pH 4 showed that the average desorption percentage of Cd(II) adsorbed on OX-Sep was 80%. The characterization results and the effect of the operating conditions on the adsorption capacity proved that electrostatic attraction and cation exchange play a crucial role in the adsorption mechanism.

Metal(loid) contamination in Bangladesh: a comprehensive synthesis in different landscapes with ecological and health implications

Elevated metal(loid) concentrations in soil and foodstuffs is a significant global issue for many densely populated countries like Bangladesh, necessitating reliable estimation for sustainable management. Therefore, a comprehensive data synthesis from the published literature might help to provide a wholistic view of metal(loid) contamination in different areas in Bangladesh. This study provided a clearer view of metal(loid) contamination status and their associated ecological and health risks in different land use and ecosystems in Bangladesh. Comprehensive analyses were performed on data gathered from 143 published articles using multiple statistical techniques including meta-analysis. Considering the potential loading of metal(loid), the data were summarized under various groups, including coastal, rural, urban and industrial regions. Also, the concentrations of seven metal(loid)s, e.g., cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni), lead (Pb), zinc (Zn), and arsenic (As) in soil, sediment, cereal, vegetable, fruit, surface water and groundwater were included. Results showed that the relative concentrations of metal(loid)s in comparison to the maximum permissible limit (MPL) were mostly less than one, although they varied significantly for locations and individual metal(loid). However, the normalized cumulative relative concentrations over the MPL for all seven metal(loid)s across different environmental samples were 4.75, 2.97, 1.51 and 2.79 for coastal, industrial, rural and urban areas, respectively, which was due to the higher concentration of Cd, Cr and Cu. Similar to the metal(loid) concentrations, the average of cumulative median non-cancer risks for all metal(loid)s was in the order of industrial (6.46) > urban (4.05) > rural (3.83) > coastal (2.41). This research outcome will provide a foundation for future research on metal(loid)s and will help in pertinent policy-making by the relevant authorities in Bangladesh.

Simultaneous and on-line detection of organic and heavy metal components in water using a novel nebulization-assisted injection plasma ionization triple quadruple mass spectrometry instrument

BACKGROUND

The global release of organic and heavy metal components into natural water bodies is a major concern for the environment and human health. The assessment of water quality relies on analyzing organic and heavy metal components qualitatively and quantitatively. Real-time identification of organic and metal components in water systems requires different analytical techniques due to varying measurement requirements. Thus, on-line detecting both organic compounds and heavy metals in ambient water systems simultaneously using a single instrumentation setup presents a significant challenge.

RESULTS

In this study, an analytical technique of nebulization-assisted injection plasma ionization mass spectrometry (NI-PIMS) was developed. This novel method enables the simultaneous detection of heavy metals and organic compounds in water system with high sensitivity, which has been demonstrated by the limit of quantification (LOQ) values below 1.0 μg/L for the three sterols (Enrofloxacin, ciprofloxacin, and clenbuterol) and three heavy metals (Pb, Ba, and Cd). Moreover, the method was successfully applied to rapidly analyze real water samples from urban and rural areas in China. The analytical results are available in less than 0.5 min, and only a few microliters of sample are required for each analysis.

SIGNIFICANCE AND NOVELTY

As far as we know, this is the first report of on-line simultaneous analysis of organic compounds and heavy metals in a water system using a single mass spectrometry instrument. Compared to traditional methods, NI-PIMS demonstrates higher efficiency, sensitivity, no or lower sample preparation, and less sample consumption. The advancement and widespread use of this technology are expected to enhance the effectiveness of mass spectrometers, broaden the applications, and play an important role in complex sample analysis in fields such as atmospheric science, environmental science, and earth science.

Equilibrium, Kinetic, and Diffusion Mechanism of lead(II) and cadmium(II) Adsorption onto Commercial Activated Carbons

The adsorption of Pb(II) and Cd(II) on three commercial microporous activated carbons was analysed. Adsorption kinetics and statistics were investigated, and the results were described with different models. The highest values of the correlation coefficient R2 were obtained for the pseudo-second-order kinetics model for all ions tested and all sorbents used. The adsorption process was found to be determined by both diffusion in the liquid layer and intraparticle diffusion. The adsorption equilibrium is very well described by Langmuir, Temkin, Thoth or Jovanovic isotherm models. Based on the values of n from the Freundlich isotherm and KL from the Langmuir isotherm, the adsorption of cadmium and lead ions was found to be favourable. The highest monolayer capacities were obtained during the adsorption of lead ions (162.19 mg/g) and for cadmium (126.34 mg/g) for activated carbon WG-12. This carbon is characterised by the highest amount of acid functional groups and the largest specific surface area. The adsorption efficiency of the tested ions from natural water is lower than that from a model solution made from deionised water. The lowest efficiencies are obtained when the process occurs from highly mineralised water.

Health Risk Assessment of Potentially Toxic Elements Contamination of Commonly Consumed Fruits in Bahir Dar Town, Northwest Ethiopia

Background

Excess accumulation of potentially toxic elements in frequently consumed fruits is a serious threat to human health. The aim of this study was to determine the levels of cadmium (Cd), chromium (Cr), copper (Cu), and lead (Pb) and to estimate the noncarcinogenic and carcinogenic health risks associated with their daily intake in commonly consumed fruits in Bahir Dar town, northwest Ethiopia.

Methods

Three types of fruits (mango, banana, and orange) were collected using a simple random sampling method from open markets in Bahir Dar town. Wet digestion was used, and the concentration of potentially toxic elements was analyzed in the edible portion of the fruits. The average daily intake (ADI), hazard quotient (HQ), hazard index (HI), and target cancer risk (TCR) were estimated to assess the human health risks posed by the intake of those potentially toxic elements from the consumption of the studied fruits.

Results

The concentrations of Cr and Cu were lower than the maximum limit of normal values in mango, banana, and orange. However, the Pb and Cd concentrations (mg kg-1) in mango were 0.576 and 1.771, respectively, which exceeded the FAO/WHO recommended permissible limits of 0.3 mg kg-1 and 0.2 mg kg-1, respectively. The ADI of potentially toxic elements was found to be lower than the maximum permitted tolerable daily intake in the studied fruits, and the HI values (mgday-1 kg-1) of all studied potentially toxic elements were lower than one in banana and orange, except mango (3.69). The TCR values for Pb, Cd, and Cr in banana and orange were 7.16 × 10-4 and 7.15 × 10-4, respectively, which exceeded the recommended threshold risk limit (>1 × 10-4), but in mango (1.71 × 10-3), the level was above the moderate risk limit (>1 × 10-3). However, the TCR value in all the studied fruits was above the recommended safe limit (ILCR < 1 × 10-6) set by the United States Environmental Protection Agency (US-EPA).

Conclusion

The study revealed that the consumption of mango fruit in the studied areas may pose noncarcinogenic and carcinogenic adverse health effects.

Heavy metals in centralized drinking water sources of the Yangtze River: A comprehensive study from a basin-wide perspective

Water quality in the Yangtze River Basin (YRB) has received considerable attention because it supplies water to 400 million people. However, the trends, sources, and risks associated with heavy metals (HMs) in water of centralized drinking water sources (CDWSs) in the YRB region are not well understood due to the lack of high-frequency, large-scale monitoring data. Moreover, research on the factors affecting the transportation of HMs in natural water are limited, all of which significantly reduce the effectiveness of CDWSs management. Therefore, this study utilized data on 11 HMs and water quality from 114 CDWSs, covering 71 prefecture-level cities (PLC) in 15 provinces (cities), to map unprecedented geospatial distribution of HMs in the YRB region and examine their concentrations in relation to water chemistry parameters. The findings revealed that the frequency of detection (FOD) of 11 HMs ranged from 28.59% (Hg) to 99.64% (Ba). The mean concentrations are ranked as follows: Ba (40.775 μg/L) > B (21.866 μg/L) > Zn (5.133 μg/L) > V (2.668 μg/L) > Cu (2.049 μg/L) > As (1.989 μg/L) > Mo (1.505 μg/L) > Ni (1.108 μg/L) > Sb (0.613 μg/L) > Pb (0.553 μg/L) > Hg (0.002 μg/L). Concentrations of Zn, As, Hg, Pb, Mo, Sb, Ni, and Ba exhibited decreasing trends from 2018 to 2022. Human activities, including industrial and agricultural production, have led to higher pollution levels in the midstream and downstream of the river than in its upstream. Additionally, the high concentrations of Ba and B are influenced by natural geological factors. Anion concentrations and nutrient levels, play a significant role in the transport of HMs in water. Probabilistic health risk assessment indicates that As, Ba, and Sb pose a potential carcinogenic risk. Additionally, non-carcinogenic risk to children under extreme conditions should also be considered.

Sustainable and reusable probe-encapsulated porous poly(AMST-co-TRIM) monolithic sensor for the selective and ultra-sensitive detection of toxic cadmium(II) from industrial/environmental wastewater

This study focuses on a new type of fast responsive solid-state visual colorimetric sensor, custom engineered with dual-entwined porous polymer imbued with chromoionophoric 4-(sec-butyl)- 2-((5-mercapto-1,3,4-thiadiazol-2-yl)diazenyl)phenol (SMDP) probe for selective and ultra-sensitive colorimetric sensing of Cd(II). The polymer monolith, i.e., poly(aminostyrene-co-trimethylolpropanetrimethacrylate) denoted as poly(AMST-co-TRIM), is designed through a stoichiometric blending of monomer, crosslinker, and porogens leading to superior surface area, pore and adsorption properties for the voluminous incorporation of SMDP probe for target specific ion sensing. The porosity, surface and structural characteristics of the poly(AMST-co-TRIM)monolith and poly(AMST-co-TRIM)SMDP sensor are investigated using p-XRD, XPS, TG-DTA, FT-IR, BET/BJH, FE-SEM, HR-TEM, EDAX, and SAED techniques. The poly(AMST-co-TRIM)SMDP sensor reveals a frozen geometrical orientation of SMDP molecules to bind selectively with Cd(II), forming stable charge-transfer complexes by exhibiting transitional visible color shifts from light yellow to dark green (λmax 608 nm). The sensor imposes a linear response from 0-200 ppb, with quantification and detection limits of 0.95 and 0.28 ppb. The fabricated sensor material is cost-effective and versatile in its solid-state naked-eye sensing, with excellent reusability. The sensor performance has been verified using various environmentally contaminated water and commercial cigarette samples, with a recovery of ≥ 99.12% and an RSD of ≤ 1.95%, thus reflecting exceptional data reproducibility/reliability.

Applications of artificial intelligence (AI) in drinking water treatment processes: Possibilities

In water treatment processes (WTPs), artificial intelligence (AI) based techniques, particularly machine learning (ML) models have been increasingly applied in decision-making activities, process control and optimization, and cost management. At least 91 peer-reviewed articles published since 1997 reported the application of AI techniques to coagulation/flocculation (41), membrane filtration (21), disinfection byproducts (DBPs) formation (13), adsorption (16) and other operational management in WTPs. In this paper, these publications were reviewed with the goal of assessing the development and applications of AI techniques in WTPs and determining their limitations and areas for improvement. The applications of the AI techniques have improved the predictive capabilities of coagulant dosages, membrane flux, rejection and fouling, disinfection byproducts (DBPs) formation and pollutants' removal for the WTPs. The deep learning (DL) technology showed excellent extraction capabilities for features and data mining ability, which can develop an image recognition-based DL framework to establish the relationship among the shapes of flocs and dosages of coagulant. Further, the hybrid techniques (e.g., combination of regression and AI; physical/kinetics and AI) have shown better predictive performances. The future research directions to achieve better control for WTPs through improving these techniques were also emphasized.

Personal Strategies to Reduce the Cardiovascular Impacts of Environmental Exposures

Ubiquitous environmental exposures increase cardiovascular disease risk via diverse mechanisms. This review examines personal strategies to minimize this risk. With regard to fine particulate air pollution exposure, evidence exists to recommend the use of portable air cleaners and avoidance of outdoor activity during periods of poor air quality. Other evidence may support physical activity, dietary modification, omega-3 fatty acid supplementation, and indoor and in-vehicle air conditioning as viable strategies to minimize adverse health effects. There is currently insufficient data to recommend specific personal approaches to reduce the adverse cardiovascular effects of noise pollution. Public health advisories for periods of extreme heat or cold should be observed, with limited evidence supporting a warm ambient home temperature and physical activity as strategies to limit the cardiovascular harms of temperature extremes. Perfluoroalkyl and polyfluoroalkyl substance exposure can be reduced by avoiding contact with perfluoroalkyl and polyfluoroalkyl substance-containing materials; blood or plasma donation and cholestyramine may reduce total body stores of perfluoroalkyl and polyfluoroalkyl substances. However, the cardiovascular impact of these interventions has not been examined. Limited utilization of pesticides and safe handling during use should be encouraged. Finally, vasculotoxic metal exposure can be decreased by using portable air cleaners, home water filtration, and awareness of potential contaminants in ground spices. Chelation therapy reduces physiological stores of vasculotoxic metals and may be effective for the secondary prevention of cardiovascular disease.

Evaluation of potentially toxic elements and microplastics in the water treatment facility

The potentially harmful effects of consuming potentially toxic elements (PTEs) and microplastics (MPs) regularly via drinking water are a significant cause for worry. This study investigated PTEs (Cd, Cu, Cr, Ni, Pd, Zn, Co), MPs, turbidity, pH, conductivity, and health risk assessment in the water treatment plant in Kielce, Poland. Zn had the highest concentrations throughout the water treatment facility, whereas Cd, Pb, and Co had lower concentrations (< 0.1 µg/L). The order of the concentrations among the specified PTEs was like Zn˃Cu˃Ni˃Cr˃Cd˃Pb and Co. The minimum turbidity was 0.34, and the maximum was 1.9 NTU. The range of pH in water samples was 6.51-7.47. The conductivity was 1,203-1,445 ms in water samples. These identified MPs were categorized into fiber and fragments. The color of these identified MPs was blue, red, black, green, and transparent. The minimum and maximum size of the MPs was 196 and 4,018 µm, while the average size was 2,751 ± 1,905 µm. The average concentration of MPs per liter of the water treatment plant was 108.88 ± 55.61. The elements listed are C, O, Na, Mg, Al, Si, K, Ca, and Ti. Fe and Zn were the predominant elements seen using EDX. HQ values of the PTEs were less than one for adults and children. The human health risk associated with all detected PTEs revealed that the HQ values exhibit a satisfactory degree of non-carcinogenic adverse health risk. HI values for adults and children age groups were less than one. In most water treatment samples, the carcinogenic value exceeds the threshold value of 10-6. The PTEs and MP concentrations in drinking water should be periodically monitored to minimize consumers' environmental pollution and health risks.

An Update in Computational Methods for Environmental Monitoring: Theoretical Evaluation of the Molecular and Electronic Structures of Natural Pigment-Metal Complexes

Metals are beneficial to life, but the presence of these elements in excessive amounts can harm both organisms and the environment; therefore, detecting the presence of metals is essential. Currently, metal detection methods employ powerful instrumental techniques that require a lot of time and money. Hence, the development of efficient and effective metal indicators is essential. Several synthetic metal detectors have been made, but due to their risk of harm, the use of natural pigments is considered a potential alternative. Experiments are needed for their development, but they are expensive and time-consuming. This review explores various computational methods and approaches that can be used to investigate metal-pigment interactions because choosing the right methods and approaches will affect the reliability of the results. The results show that quantum mechanical methods (ab initio, density functional theory, and semiempirical approaches) and molecular dynamics simulations have been used. Among the available methods, the density functional theory approach with the B3LYP functional and the LANL2DZ ECP and basis set is the most promising combination due to its good accuracy and cost-effectiveness. Various experimental studies were also in good agreement with the results of computational methods. However, deeper analysis still needs to be carried out to find the best combination of functions and basis sets.

Recent advances in clay minerals for groundwater pollution control and remediation

Clay minerals are abundant on Earth and have been crucial to the advancement of human civilization. The ability of clay minerals to absorb chemicals is frequently utilized to remove hazardous compounds from aquatic environments. Moreover, clay-based adsorbent products are both environmentally acceptable and affordable. This study provides an overview of advances in clay minerals in the field of groundwater remediation and related predictions. The existing literature was examined using data and information aggregation approaches. Keyword clustering analysis of the relevant literature revealed that clay minerals are associated with groundwater utilization and soil pollution remediation. Principal component analysis was used to assess the relationships among clay mineral modification methods, pollutant properties, and the Langmuir adsorption capacity (Qmax). The results demonstrated that pollutant properties affect the Qmax of pollutants adsorbed by clay minerals. Systematic cluster analysis was utilized to classify the collected data and investigate the relationships. The pollution adsorption mechanism of the unique structure of clay minerals was investigated based on the characterization results. Modified clay minerals exhibited changes in surface functional groups, internal structure, and pHpzc. This review provides a summary of recent clay-based materials and their applications in groundwater remediation, as well as discussions of their challenges and future prospects.

Cyanoremediation of heavy metals (As(v), Cd(ii), Cr(vi), Pb(ii)) by live cyanobacteria (Anabaena variabilis, and Synechocystis sp.): an eco-sustainable technology

The cyanoremediation technique for heavy metal (HM) removal from wastewater using live cyanobacteria is promising to reduce the pollution risk both for the environment and human health. In this study, two widely recognized freshwater cyanobacteria, Anabaena variabilis and Synechocystis sp., were used to explore their efficacy in HM (As(v), Cd(ii), Cr(vi), Pb(ii)) removal. The different optimum adsorption conditions were pH 8 and 7.5 for A. variabilis and Synechocystis sp., respectively, but the temperature (25 °C) and contact time (48 hours) were the same for both strains. Under these specified conditions, A. variabilis exhibited the capability to remove 25% of As(v), 78% of Cd(ii), 54% of Cr(vi), and 17% of Pb(ii), whereas Synechocystis sp. removed 77% of As(v), 57% of Cd(ii), 91% of Cr(vi), and 77% of Pb(ii) at different initial concentrations. Metal diversity interfered negatively with cyanobacterial growth, especially Cd(ii) and As(v), as measured by OD730, dry biomass, chlorophyll a, and carotenoid production for both strains. Fourier transform infrared spectrum (FT-IR) analysis revealed the existence of diverse surface binding sites for HM adsorption, stemming from proteins and polysaccharides. Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) confirmed the presence of HMs on the surface of the cyanobacterial cells. Finally, the zeta potential results indicating alterations in the surface negative charges elucidated the adsorption mechanisms involved in the HM removal by both cyanobacteria. These results provided a comprehensive understanding of the HM adsorption mechanism by cyanobacteria, offering valuable theoretical insights that can be extrapolated to enhance our comprehension of the cyanoremediation mechanisms by various other cyanobacterial strains.

Emerging insights into the impacts of heavy metals exposure on health, reproductive and productive performance of livestock

Heavy metals, common environmental pollutants with widespread distribution hazards and several health problems linked to them are distinguished from other toxic compounds by their bioaccumulation in living organisms. They pollute the food chain and threaten the health of animals. Biologically, heavy metals exhibit both beneficial and harmful effects. Certain essential heavy metals such as Co, Mn, Se, Zn, and Mg play crucial roles in vital physiological processes in trace amounts, while others like As, Pb, Hg, Cd, and Cu are widely recognized for their toxic properties. Regardless of their physiological functions, an excess intake of all heavy metals beyond the tolerance limit can lead to toxicity. Animals face exposure to heavy metals through contaminated feed and water, primarily as a result of anthropogenic environmental pollution. After ingestion heavy metals persist in the body for an extended duration and the nature of exposure dictates whether they induce acute or chronic, clinical or subclinical, or subtle toxicities. The toxic effects of metals lead to disruption of cellular homeostasis through the generation of free radicals that develop oxidative stress. In cases of acute heavy metal poisoning, characteristic clinical symptoms may arise, potentially culminating in the death of animals with corresponding necropsy findings. Chronic toxicities manifest as a decline in overall body condition scoring and a decrease in the production potential of animals. Elevated heavy metal levels in consumable animal products raise public health concerns. Timely diagnosis, targeted antidotes, and management strategies can significantly mitigate heavy metal impact on livestock health, productivity, and reproductive performance.