Recent advances in simultaneous analysis of bisphenol A and its conjugates in human matrices: Exposure biomarker perspectives

Characterization of Chemical Exposome in A Paired Human Preconception Pilot Study

Parental preconception exposure to synthetic chemicals may have critical influences on fertility and reproduction. Here, we present a robust LC-MS/MS method covering up to 95 diverse xenobiotics in human urine, serum, seminal and follicular fluids to support exposome-wide assessment in reproductive health outcomes. Extraction recoveries of validated analytes ranged from 62% to 137% and limits of quantification from 0.01 to 6.0 ng/mL in all biofluids. We applied the validated method to a preconception cohort of Australian couples (n = 30) receiving fertility treatment. In total, 36 and 38 xenobiotics were detected across the paired biofluids of males and females, respectively, including PFAS, parabens, organic UV-filters, plastic additives, antimicrobials, and other industrial chemicals. Results showed 39% of analytes in males and 37% in females were equally detected in paired serum, urine, and reproductive fluids. The first detection of the sunscreen ingredient avobenzone and the industrial chemical 4-nitrophenol in follicular and seminal fluids suggests they can cross both blood-follicle/testis barriers, indicating potential risks for fertility. Further, the blood-follicle transfer of perfluorobutanoic acid, PFOA, PFHxS, PFOS, and oxybenzone corroborate that serum concentrations can be reliable proxies for assessing exposure within the ovarian microenvironment. In conclusion, we observed significant preconception exposure to multiple endocrine disruptors in couples and identified potential xenobiotics relevant to male and female fertility impairments.

A computational assay for identifying millet-derived compounds that antagonize the interaction between bisphenols and estrogen-related receptor gamma

The use of Bisphenol A (BPA) and its analogs in industries, as well as the products made from them, is becoming a significant concern for human health. Scientific studies have revealed that BPA functions as an endocrine disruptor. While some analogs of BPA (bisphenols) have been used for a longer time, it was later discovered that they are toxic, similar to BPA. Their widespread use ensures their presence in the environment, and thus, everyone is exposed to them. Scientific research has shown that BPA interacts with estrogen-related receptor gamma (ERRγ), affecting its normal function. ERRγ is involved in biological processes including energy metabolism and mitochondrial function. Therefore, continuous exposure to bisphenols increases the risk of various diseases. In our previous study, we observed that some analogs of BPA had a higher binding affinity to ERRγ compared to BPA itself and analyzed the amino acid residues involved in this interaction. We hypothesized that by antagonizing the interaction between bisphenols and ERRγ, we could neutralize their toxic effects. Taking into account the health benefits of millets and their toxin removal properties, virtual screening of millet-derived compounds was conducted along with prediction of their ADMET profiles. Top five candidates were prioritized for Density Functional Theory (DFT) calculations and further analyses. Long-term molecular dynamics simulation (1 µs) were utilized to evaluate their binding, stability, and antagonizing abilities. Furthermore, reevaluation of their binding energy was conducted using the MM-PBSA method. This study reports millet-derived compounds, namely, Tricin 7-rutinoside, Tricin 7-glucoside, Glucotricin, Kaempferol, and Setarin. These compounds are predicted to be potent competitive inhibitors that can antagonize the interactions between bisphenols and ERRγ. These compounds could potentially assist in the development of future therapeutics. They may also be considered for use as food supplements, although further investigations, including wet-lab experiments and clinical studies, are needed.

Exposure to bisphenol A in European women from 2007 to 2014 using human biomonitoring data - The European Joint Programme HBM4EU

BACKGROUND

Bisphenol A (BPA; or 4,4'-isopropylidenediphenol) is an endocrine disrupting chemical. It was widely used in a variety of plastic-based manufactured products for several years. The European Food Safety Authority (EFSA) recently reduced the Tolerable Daily Intake (TDI) for BPA by 20,000 times due to concerns about immune-toxicity.

OBJECTIVE

We used human biomonitoring (HBM) data to investigate the general level of BPA exposure from 2007 to 2014 of European women aged 18-73 years (n = 4,226) and its determinants.

METHODS

Fifteen studies from 12 countries (Austria, Belgium, Denmark, France, Germany, Greece, Israel, Luxembourg, Slovenia, Spain, Sweden, and the United Kingdom) were included in the BPA Study protocol developed within the European Joint Programme HBM4EU. Seventy variables related to the BPA exposure were collected through a rigorous post-harmonization process. Linear mixed regression models were used to investigate the determinants of total urine BPA in the combined population.

RESULTS

Total BPA was quantified in 85-100 % of women in 14 out of 15 contributing studies. Only the Austrian PBAT study (Western Europe), which had a limit of quantification 2.5 to 25-fold higher than the other studies (LOQ=2.5 µg/L), found total BPA in less than 5 % of the urine samples analyzed. The geometric mean (GM) of total urine BPA ranged from 0.77 to 2.47 µg/L among the contributing studies. The lowest GM of total BPA was observed in France (Western Europe) from the ELFE subset (GM=0.77 µg/L (0.98 µg/g creatinine), n = 1741), and the highest levels were found in Belgium (Western Europe) and Greece (Southern Europe), from DEMOCOPHES (GM=2.47 µg/L (2.26 µg/g creatinine), n = 129) and HELIX-RHEA (GM=2.47 µg/L (2.44 µg/g creatinine), n = 194) subsets, respectively. One hundred percent of women in 14 out of 15 data collections in this study exceeded the health-based human biomonitoring guidance value for the general population (HBM-GVGenPop) of 0.0115 µg total BPA/L urine derived from the updated EFSA's BPA TDI. Variables related to the measurement of total urine BPA and those related to the main socio-demographic characteristics (age, height, weight, education, smoking status) were collected in almost all studies, while several variables related to BPA exposure factors were not gathered in most of the original studies (consumption of beverages contained in plastic bottles, consumption of canned food or beverages, consumption of food in contact with plastic packaging, use of plastic film or plastic containers for food, having a plastic floor covering in the house, use of thermal paper…). No clear determinants of total urine BPA concentrations among European women were found. A broader range of data planned for collection in the original questionnaires of the contributing studies would have resulted in a more thorough investigation of the determinants of BPA exposure in European women.

CONCLUSION

This study highlights the urgent need for action to further reduce exposure to BPA to protect the population, as is already the case in the European Union. The study also underscores the importance of pre-harmonizing HBM design and data for producing comparable data and interpretable results at a European-wide level, and to increase HBM uptake by regulatory agencies.

Bisphenol A and its analogues: from their occurrence in foodstuffs marketed in Europe to improved monitoring strategies-a review of published literature from 2018 to 2023

In this review article, the research works covering the analytical determination of bisphenol A (BPA) and its structural analogues published from 2018 to present (February 2024) were examined. The review offers an overview of the concentration levels of these xenoestrogens in food and beverages, and discusses concerns that these may possibly pose to the human health and scrutinises, from an analytical perspective, the main biomonitoring approaches that are applied. This comes as a natural evolution of a previous review that covered the same topic but in earlier years (up to 2017). As compared to the past, while the volume of published literature on this topic has not necessarily decreased, the research studies are now much more homogeneous in terms of their geographical origin, i.e., Southern Europe (mainly Italy and Spain). For this reason, an estimated daily intake of the European population could not be calculated at this time. In terms of the analytical approaches that were applied, 67% of the research groups exploited liquid chromatography (LC), with a detection that was prevalently (71%) afforded by mass spectrometry, with over one-fourth of the research teams using fluorescence (26%) and a minority (3%) detecting the analytes with diode array detection. One-third of the groups used gas chromatography (GC)-mass spectrometry achieving comparatively superior efficiency as compared to LC. Derivatisation was performed in 59% of the GC studies to afford more symmetrical signals and enhanced sensitivity. Although the contamination levels are well below the threshold set by governments, routinely biomonitoring is encouraged because of the possible accumulation of these contaminants in the human body and of their interplay with other xenoestrogens.

The Carcinogenic Potential of Bisphenol A in the Liver Based on Transcriptomic Studies

Bisphenol A (BPA) is an environmental toxin widely used in the production of polycarbonate plastics. A correlation exists between BPA tissue contamination and the occurrence of pathological conditions, including cancer. First-passage detoxification of high BPA amounts in the liver promotes hepatotoxicity and morphological alterations of this organ, but there is a lack of knowledge about the molecular mechanisms underlying these phenomena. This prompted us to investigate changes in the liver transcriptomics of 3-month-old female mice exposed to BPA (50 mg/kg) in drinking water for 3 months. Five female mice served as controls. The animals were euthanized, the livers were collected, and RNA was extracted to perform RNA-seq analysis. The multistep transcriptomic bioinformatics revealed 120 differentially expressed genes (DEGs) in the BPA-exposed samples. Gene Ontology (GO) annotations indicated that DEGs have been assigned to many biological processes, including "macromolecule modification" and "protein metabolic process". Several of the revealed DEGs have been linked to the pathogenesis of severe metabolic liver disorders and malignant tumors, in particular hepatocellular carcinoma. Data from this study suggest that BPA has a significant impact on gene expression in the liver, which is predictive of the carcinogenic potential of this compound in this organ.

Quantification of the Conjugated Forms of Dichlorobisphenol A (3,3'-Cl 2 BPA) in Rat and Human Plasma Using HPLC-MS/MS

BACKGROUND

Bisphenol A (BPA) is a ubiquitous contaminant that has endocrine-disrupting effects. Chlorinated derivatives of BPA are formed during chlorination of drinking water and have higher endocrine-disrupting activity. Dichlorobisphenol A (Cl 2 BPA) is the most abundant chlorinated BPA derivative found in several human biological matrices. Recent in vitro experiments have shown that Cl 2 BPA is metabolized in sulpho- and glucuro-conjugated compounds. To date, no assay has been developed to quantify the sulfo- and glucuro-conjugates of 3,3'-Cl 2 BPA (3,3'-Cl 2 BPA-S and 3,3'-Cl 2 BPA-G, respectively).

METHODS

A high-performance liquid chromatography-tandem mass spectrometry assay for the determination of 3,3'-Cl 2 BPA conjugated forms in plasma samples was developed and validated according to the European Medicines Agency guidelines. Quantification was performed in the multiple reaction monitoring mode for all target analytes using a SCIEX 6500 + tandem mass spectrometer with an electrospray source operating in the negative ionization mode. Chromatographic separation was achieved using a C18 column maintained at 40°C and a binary mobile phase delivered in the gradient mode at a flow rate of 0.35 mL/min. Sample was prepared via simple precipitation using acetonitrile. The assay was validated and applied to rat and human plasma samples.

RESULTS

Linearity was demonstrated over the range of 0.006-25 ng/mL for 3,3'-Cl 2 BPA-G and 0.391-100 ng/mL for 3,3'-Cl 2 BPA-S. Intraday and interday bias values were in the 95%-109% range, and the imprecision <9%. Internal standard corrected matrix effects were also investigated. This method enabled quantification of the conjugated forms of 3,3'-Cl 2 BPA in plasma samples.

CONCLUSIONS

This is the first report on the development and validation of an analytical method for the quantification of 3,3'-Cl 2 BPA-G and 3,3'-Cl 2 BPA-S in the plasma matrix. This study is also the first report on the in vivo occurrence of these metabolites.

Dietary exposure to endocrine disruptors in gut microbiota: A systematic review

Endocrine disrupting chemicals (EDCs) can interfere with hormonal actions and have been associated with a higher incidence of metabolic disorders. They affect numerous physiological, biochemical, and endocrinal activities, including reproduction, metabolism, immunity, and behavior. The purpose of this review was to elucidate the association of EDCs in food with the gut microbiota and with metabolic disorders. EDC exposure induces changes that can lead to microbial dysbiosis. Products and by-products released by the microbial metabolism of EDCs can be taken up by the host. Changes in the composition of the microbiota and production of microbial metabolites may have a major impact on the host metabolism.

Challenges in the Analytical Preparation of a Biological Matrix in Analyses of Endocrine-Disrupting Bisphenols

Endocrine-disrupting chemicals (EDCs) are xenobiotics presented in a variety of everyday products that may disrupt the normal activity of hormones. Exposure to bisphenol A as EDC at trace and ultra-trace levels is associated with adverse health effects, and children are recognized as the most vulnerable group to EDCs exposure. In this review, a summary is presented of up-to-date sample preparation methods and instrumental techniques applied for the detection and quantification of bisphenol A and its structural analogues in various biological matrices. Biological matrices such as blood, cell-free blood products, urine, saliva, breast milk, cordial blood, amniotic and semen fluids, as well as sweat and hair, are very complex; therefore, the detection and later quantification of bisphenols at low levels present a real analytical challenge. The most popular analytical approaches include gas and liquid chromatography coupled with mass spectrometry, and their enhanced reliability and sensitivity finally allow the separation and detection of bisphenols in biological samples, even as ultra-traces. Liquid/liquid extraction (LLE) and solid-phase extraction (SPE) are still the most common methods for their extraction from biological matrices. However, many modern and environmentally safe microextraction techniques are currently under development. The complexity of biological matrices and low concentrations of analytes are the main issues for the limited identification, as well as understanding the adverse health effects caused by chronical and ubiquitous exposure to bisphenols and its analogues.

Assessment of BPA and BPS exposure in the general population in Guangzhou, China - Estimation of daily intakes based on urinary metabolites

Human exposure to bisphenol A (BPA) and bisphenol S (BPS) has garnered considerable global health concerns. In this paper, the daily intake (DI) of BPA and BPS in the general population of Guangzhou, China, were back-calculated using the biomarkers BPA glucuronides (BPA-G) and BPS glucuronides (BPS-G), respectively. The biomarkers are preferable to total BPA and BPS measurements because they are not susceptible to external contamination. A total of 1440 urine samples were gathered from the general population in Guangzhou, China, which were classified by age and sex into 36 pooled urine samples. 100% and 98% of pooled urine samples contained BPA-G and BPS-G at median values of 1.57 and 0.38 ng/mL, respectively. Based on urinary BPA-G and BPS-G concentrations, we determined the median DI of BPA and BPS to be 31.07 and 7.37 ng/(kg bw*d), respectively, and the highest values to be 106.77 ng/(kg bw*d) and 18.19 ng/(kg bw*d), respectively. Furthermore, our results showed that for the entire dataset, the DI of BPA and BPS were considerably greater in males than in females (p < 0.01)and declined significantly with age (p < 0.05). For risk assessment, the estimated DIs of BPA and BPS were much lower than the European Food Safety Authority^' s (EFSA) the temporary acceptable reference dose of 4 μg/(kg bw*d) advised for BPA, suggesting that the exposure risk of BPA and BPS for Guangzhou population is within a controllable safety range. This is the first study to investigate BPA and BPS exposure in the general population of Guangzhou, China, on the basis of urinary metabolites.

Human dietary exposure to bisphenol-diglycidyl ethers in China: Comprehensive assessment through a total diet study

Despite the widespread use of bisphenol A diglycidyl ether (BADGE) and bisphenol F diglycidyl ether (BFDGE) in various consumer products as protective plasticizer, studies on human dietary exposure to these compounds are scare. In this study, nine bisphenol diglycidyl ethers (BDGEs) including BADGE, BFDGE, and seven of their derivatives were determined in the Chinese adult population based on composite dietary samples collected from the sixth (2016-2019) China total diet study (TDS). Contamination level of nine BDGEs was determined in 288 composite dietary samples from 24 provinces in China. BADGE·2H₂O and BADGE are the most frequently detected and BADGE·2H₂O presented the highest mean concentration (2.402 μg/kg). The most contaminated food composite is meats, with a mean ∑₉BDGEs of 8.203 μg/kg, followed by aquatic products (4.255 μg/kg), eggs (4.045 μg/kg), and dairy products (3.256 μg/kg). The estimated daily intake (EDI) of ∑₉BDGEs based on the mean and 95th percentile concentrations are 121.27 ng/kg bw/day and 249.71 ng/kg bw/day. Meats, eggs, and aquatic products are the main source of dietary exposure. Notably, beverages and water, alcohols were the main contributors of dietary exposure to BADGE and BADGE·2H₂O, followed by animal-derived foods. Dietary exposure assessment demonstrated that human dietary BDGEs do not pose risks to general population based on the mean and 95th percentile hazard index with < 1. This is the first comprehensive national dietary exposure assessment of BDGEs in Chinese general population.

Impact of Bisphenol A on Structure and Function of Mitochondria: A Critical Review

Bisphenol A (BPA) is an industrial chemical used extensively to manufacture polycarbonate plastics and epoxy resins. Because of its estrogen-mimicking properties, BPA acts as an endocrine-disrupting chemical. It has gained attention due to its high chances of daily and constant human exposure, bioaccumulation, and the ability to cause cellular toxicities and diseases at extremely low doses. Several elegant studies have shown that BPA can exert cellular toxicities by interfering with the structure and function of mitochondria, leading to mitochondrial dysfunction. Exposure to BPA results in oxidative stress and alterations in mitochondrial DNA (mtDNA), mitochondrial biogenesis, bioenergetics, mitochondrial membrane potential (MMP) decline, mitophagy, and apoptosis. Accumulation of reactive oxygen species (ROS) in conjunction with oxidative damage may be responsible for causing BPA-mediated cellular toxicity. Thus, several reports have suggested using antioxidant treatment to mitigate the toxicological effects of BPA. The present literature review emphasizes the adverse effects of BPA on mitochondria, with a comprehensive note on the molecular aspects of the structural and functional alterations in mitochondria in response to BPA exposure. The review also confers the possible approaches to alleviate BPA-mediated oxidative damage and the existing knowledge gaps in this emerging area of research.

Determination of multiple bisphenol analogues and their metabolites in human serum by liquid chromatography tandem mass spectrometry

To date, knowledge of internal human exposure to BPA and its analogues (particularly bisphenol S and bisphenol F, etc.) remains limited. In the present study, a method involving dispersive solid-phase extraction and LC/MS was proposed to investigate the contamination levels of 28 precursor bisphenols and 9 major metabolites in serum. The critical variables of preparation method were screened out by Plackett-Burman design and further optimized by central composite design. Left in optimal conditions, a total of 286 samples consisting of 153 males and 133 females were analyzed. The results showed that BPA dominated over all the cases with the highest positive rate (82.2% of all the surveyed people), and totally four metabolites (BPA β-D-glucuronide, BPA monosulfate, BPA bis-(β-D-glucuronide) and BPS monosulfate) were detectable. The occurrence of BPA bis-(β-D-glucuronide) in serum is reported for the first time and its higher positive rate and contamination concentrations suggested that it may be a more important metabolite of BPA than others. Negligible potential risk of health effects to blood donors was observed, since the estimated exposure levels (mean 32.1 ng/kg bw/day, 95th 123.2 ng/kg bw/day) were well below far less than the temporary tolerable reference dose of BPA that recommended by the European Food Safety Authority (4 μg/kg bw/day by). The reference level of BPA for healthy population was determined to be 4.09 μg/L via the percentile method.

Bisphenol A in edible tissues of rams exposed to repeated low-level dietary dose by high-performance liquid chromatography with fluorescence detection

The presented work deals with levels and distribution of bisphenol A (BPA) in the edible tissues of a large food-producing animal species. An experimental animal study included 14 young Istrian pramenka rams (Ovis aries), of which seven were exposed for 64 days to a low dietary dose of BPA at 25 µg/kg b.w./day, and seven served as a control group. Residue analysis of both aglycone and total BPA was performed in the muscle tissue, liver, kidney and fat tissue of the individual animals by means of enzymatic deconjugation (for total BPA), organic solvent extraction, molecularly imprinted polymer solid-phase extraction (MISPE) clean-up and high-performance liquid chromatography with fluorescence detection (HPLC-FLU). The analysis was optimized and validated for aglycone BPA in the fat tissue and for the total BPA in all tissues investigated. Edible tissues of the control group of rams generally remained BPA-free, while there were concentration differences between the control and treated groups for liver and kidney post last administration. The human health risk resulting from this study was assessed by the estimated dietary exposure in adults, which was < 0.1% related to the valid European Union Tolerable Daily Intake (TDI) value of 4 µg/kg b.w./day. However, it would be 58-fold higher than the newly proposed TDI value of 0.04 ng/kg b.w./day.

Validated single urinary assay designed for exposomic multi-class biomarkers of common environmental exposures

Epidemiological studies often call for analytical methods that use a small biospecimen volume to quantify trace level exposures to environmental chemical mixtures. Currently, as many as 150 polar metabolites of environmental chemicals have been found in urine. Therefore, we developed a multi-class method for quantitation of biomarkers in urine. A single sample preparation followed by three LC injections was optimized in a proof-of-approach for a multi-class method. The assay was validated to quantify 50 biomarkers of exposure in urine, belonging to 7 chemical classes and 16 sub-classes. The classes represent metabolites of 12 personal care and consumer product chemicals (PCPs), 5 polycyclic aromatic hydrocarbons (PAHs), 5 organophosphate flame retardants (OPFRs), 18 pesticides, 5 volatile organic compounds (VOCs), 4 tobacco alkaloids, and 1 drug of abuse. Human urine (0.2 mL) was spiked with isotope-labeled internal standards, enzymatically deconjugated, extracted by solid-phase extraction, and analyzed using high-performance liquid chromatography-tandem mass spectrometry. The methanol eluate from the cleanup was split in half and the first half analyzed for PCPs, PAH, and OPFR on a Betasil C18 column; and pesticides and VOC on a Hypersil Gold AQ column. The second half was analyzed for tobacco smoke metabolites and a drug of abuse on a Synergi Polar RP column. Limits of detection ranged from 0.01 to 1.0 ng/mL of urine, with the majority ≤0.5 ng/mL (42/50). Analytical precision, estimated as relative standard deviation of intra- and inter-batch uncertainty, variabilities, was <20%. Extraction recoveries ranged from 83 to 109%. Results from the optimized multi-class method were qualified in formal international proficiency testing programs. Further method customization options were explored and method expansion was demonstrated by inclusion of up to 101 analytes of endo- and exogenous chemicals. This exposome-scale assay is being used for population studies with savings of assay costs and biospecimens, providing both quantitative results and the discovery of unexpected exposures.

From target analysis to suspect and non-target screening of endocrine-disrupting compounds in human urine

In the present work, a target analysis method for simultaneously determining 24 diverse endocrine-disrupting compounds (EDCs) in urine (benzophenones, bisphenols, parabens, phthalates and antibacterials) was developed. The target analysis approach (including enzymatic hydrolysis, clean-up by solid-phase extraction and analysis by liquid chromatography coupled to tandem mass spectrometry (LC–MS/MS)) was optimized, validated and applied to volunteers’ samples, in which 67% of the target EDCs were quantified. For instance, benzophenone-3 (0.2–13 ng g⁻¹), bisphenol A (7.7–13.7 ng g⁻¹), methyl 3,5-dihydroxybenzoate (8–254 ng g⁻¹), mono butyl phthalate (2–17 ng g⁻¹) and triclosan (0.3–9 ng g⁻¹) were found at the highest concentrations, but the presence of other analogues was detected as well. The developed target method was further extended to suspect and non-target screening (SNTS) by means of LC coupled to high-resolution MS/MS. First, well-defined workflows for SNTS were validated by applying the previously developed method to an extended list of compounds (83), and then, to the same real urine samples. From a list of approximately 4000 suspects, 33 were annotated at levels from 1 to 3, with food additives/ingredients and personal care products being the most abundant ones. In the non-target approach, the search was limited to molecules containing S, Cl and/or Br atoms, annotating 4 pharmaceuticals. The results from this study showed that the combination of the lower limits of detection of MS/MS and the identification power of high-resolution MS/MS is still compulsory for a more accurate definition of human exposome in urine samples.

Analytical Methods for Determination of BPA Released from Dental Resin Composites and Related Materials: A Systematic Review

Knowing the impacts of bisphenol A (BPA) on human health, this systematic review aimed to gather the analytical methods for the quantification of BPA release of BPA in dental materials in in vitro and in vivo (biological fluids) studies. A brief critical discussion of the impacts of BPA on human health and the possible association with BPA in dental materials was also presented. The research was carried out by three independent researchers, (according to PRISMA guidelines) in PUBMED and SCOPUS databases, by searching for specific keywords and articles published between January 2011 and February 2022. Seventeen articles met the eligibility criteria and were included in this systematic review: 10 in vitro and 7 in vivo. In in vitro studies, the highest amounts of BPA released were from flowable to conventional resins, followed by resin-modified glass ionomer. In contrast, the smallest amount was released from "BPA-free" composites and CAD-CAM blocks. Regarding in vivo studies, a higher concentration of BPA were found in saliva than urine or blood. The best analytical method for trace quantifying BPA is LC-MS/MS (Liquid Chromatography with Tandem Mass Spectrometry) due to its selectivity, low quantification limits, and the unequivocal identification. However, further studies are required to develop faster and more sensitive methods, in order to obtain more reliable results.

The effects of bisphenols on the cardiovascular system

Bisphenols, endocrine disrupting chemicals, have frequently been used for producing food packaging materials. The best-known member, bisphenol A (BPA), has been linked to impaired foetal development in animals. Possible negative effects of BPA on human health have resulted in the production of novel, so-called next-generation (NextGen) bisphenols whose effects on humans are much less explored or even missing. This review aimed to summarise and critically assess the main findings and shortages in current bisphenol research in relation to their potential impact on the cardiovascular system in real biological exposure. Because of the common presence of bisphenols in daily use products, humans are clearly exposed to these compounds. Most data are available on BPA, where total serum levels (i.e. included conjugated metabolite) can reach up to ∼430 nM, while free bisphenol levels have been reported up to ∼80 nM. Limited data are available for other bisphenols, but maximal serum levels of bisphenol S have been reported (680 nM). Such levels seem to be negligible, although in vitro studies have showed effects on ion channels, and thyroid, oestrogenic and androgenic receptors in low micromolar concentrations. Ex vivo studies suggest vasodilatory effects of bisphenols. This stays in clear contrast to the elevation of arterial blood pressure documented in vivo and in observatory cross-sectional human studies. Bisphenols are also claimed to have a negative effect on lipidic spectrum and coronary artery disease. Regardless, the reported data are generally inconsistent and unsatisfactory. Hence novel well-designed studies, testing in particular NextGen bisphenols, are needed.

Enzymatic probe sonication for quick extraction of total bisphenols from animal-derived foods: Applicability to occurrence and exposure assessment

A high demand exists in bisphenols (BPs) screening studies for quick, reliable and straightforward analytical methods that generate data faster and simultaneously. Herein, we describe a combination of enzymatic probe sonication (EPS) and ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) for quick extraction and simultaneous quantification of eight important BPs in animal-derived foods. Results obtained demonstrated that the ultrasonic probe power could not only enhance the enzymatic hydrolysis efficiency, but also accelerate the liquid-liquid extraction procedure. Under optimized EPS parameters, one sample could be exhaustively extracted within 120 s, as compared with 12 h needed for the conventional enzymatic extraction which is more suitable for high-throughput analysis. The method was successfully applied to analyze residual BPs in animal-derived foods collected from Beijing, China. Widespread occurrence of BPA, BPS, BPF, BPAF, BPP, and BPB were found, with detection frequencies of 65.2%, 42.4%, 33.7%, 29.4%, 28.3%, and 27.2%, respectively. The highest total concentration levels of BPs (sum of the eight BPs analyzed, ΣBPs) were found in chicken liver (mean 12.2 μg/kg), followed by swine liver (6.37 μg/kg), bovine muscle (3.24 μg/kg), egg (2.03 μg/kg), sheep muscle (2.03 μg/kg), chicken muscle (1.45 μg/kg), swine muscle (1.42 μg/kg), and milk (1.17 μg/kg). The estimated daily intake (EDI) of BPs, based on the mean and 95th percentile concentrations and daily food consumptions, was estimated to be 5.687 ng/kg bw/d and 22.71 ng/kg bw/d, respectively. The human health risk assessment in this work suggests that currently BPs do not pose significant risks to the consumers because the hazard index (HI) was <1.

Direct LC-MS/MS and indirect GC-MS/MS methods for measuring urinary bisphenol A concentrations are comparable

BACKGROUND

Bisphenol A (BPA) is typically measured in urine using an indirect method that involves enzymatic deconjugation and extraction. In contrast, the direct method measures free and conjugated BPA concurrently and sums them to estimate urinary BPA concentrations. Statistical comparison of total BPA results using the direct and indirect methods is necessary to accurately interpret biomonitoring data for risk assessments.

OBJECTIVES

To compare urinary BPA concentrations estimated from the indirect and direct methods in duplicate first trimester urine samples collected from 1879 pregnant women from the MIREC Study.

METHODS

For the indirect method, we measured urinary BPA concentrations using GC-MS/MS. For the direct method, we summed free and conjugated BPA concentrations measured using LC-MS/MS. We evaluated deviation between the two methods using the Bland-Altman analysis in the total sample and stratified (1) by specific gravity and (2) at the limit of quantification (LOQ).

RESULTS

Median urinary BPA concentrations for the direct and indirect methods were 0.89 µg BPA equivalents/L and 0.81 µg/L respectively. Concentrations from the direct method were, on average, 8.6% (95% CI: 6.7%, 10.5%) higher than the indirect method in a Bland-Altman analysis. The percent differences between the two methods was 4.0% in urines with specific gravities < 1.02 (n = 1348, 72%) and 20.3% in urine with specific gravity ≥ 1.02. In values below the LOQ (n = 663, 35%), we observed smaller average percent deviation (4.8%) between the two methods but wider limits of agreement.

DISCUSSION

Results from this study, based on the largest statistically rigorous comparison of the direct and indirect methods of BPA measurement, contrast previous findings reporting that the indirect method underestimates total BPA exposure. The difference in urinary BPA concentrations we observed with the indirect and direct methods is unlikely to alter the interpretation of health outcome data.

Recent advances in analysis of bisphenols and their derivatives in biological matrices

Biomonitoring is a very useful tool to evaluate human exposure to endocrine-disrupting compounds (EDCs), like bisphenols (BPs), which are widely used in the manufacture of plastics. The development of reliable analytical methods is key in the field of public health surveillance to obtain biomonitoring data to determine what BPs are reaching people's bodies. This review discusses recent methods for the quantitative measurement of bisphenols and their derivatives in biological samples like urine, blood, breast milk, saliva, and hair, among others. We also discuss the different procedures commonly used for sample treatment, which includes extraction and clean-up, and instrumental techniques currently used to determine these compounds. Sample preparation techniques continue to play an important role in the analysis of complex matrices, for liquid matrices the most commonly employed is solid-phase extraction, although microextraction techniques are gaining importance in this field, and for solid samples ultrasound-assisted extraction. The main instrumental techniques used are liquid and gas chromatography coupled with mass spectrometry. Finally, we present data on the main parameters obtained in the validation of the revised methods. This review focuses on various methods developed and applied for trace analysis of bisphenols, their conjugates, halogenated derivatives, and diglycidyl ethers in biological samples to enable the required selectivity and sensitivity. For this purpose, a review is carried out of the most recent relevant publications from 2016 up to present.

Human biomonitoring initiative (HBM4EU): Human biomonitoring guidance values (HBM-GVs) derived for bisphenol A

The "European Human Biomonitoring Initiative" (HBM4EU) derives human biomonitoring guidance values (HBM-GVs) for the general population (HBM-GV_GenPop) and/or for occupationally exposed adults (HBM-GV_Worker) for several priority substances and substance groups as identified by policy makers, scientists and stakeholders at EU and national level, including bisphenol A (BPA). Human exposure to BPA is widespread and of particular concern because of its known endocrine-disrupting properties. Unlike the conjugated forms of BPA circulating in the body, free BPA is known to interact with the nuclear estrogen receptors. Because free BPA is considered to be more toxicologically active than the conjugated forms (e.g. BPA-glucuronide (BPA-G) and BPA-sulfate (BPA-S)), its measurement in blood provides the superior surrogate of the biologically effective dose. However, considering the difficulty of implementing blood sampling in large HBM cohorts, as well as the current analytical capacities complying with the quality assurance (QA)/quality control (QC) schemes, total BPA in urine (i.e. the sum of free and conjugated forms of BPA measured after an hydrolysis of phase II metabolites) was retained as the relevant exposure biomarker for BPA. HBM-GV_GenPop for total BPA in urine of 230 µg/L and 135 µg/L for adults and children, respectively, were developed on the basis of toxicological data. To derive these values, the concentrations of urinary total BPA consistent with a steady-state exposure to the temporary Tolerable Daily Intake (t-TDI) of 4 µg/kg bw/day set in 2015 by the European Food Safety Authority (EFSA) were estimated. The BPA human physiologically-based pharmacokinetic (PBPK) model developed by Karrer et al. (2018) was used, assuming an oral exposure to BPA at the t-TDI level averaged over 24 h. Dermal uptake of BPA is suspected to contribute substantially to the total BPA body burden, which in comparison with the oral route, is generating a higher ratio of free BPA to total BPA in blood. Therefore, an alternative approach for calculating the HBM-GV_GenPop according to the estimated relative contributions of both the oral and dermal routes to the global BPA exposure is also discussed. Regarding BPA exposure at the workplace, the steady-state concentration of urinary total BPA was estimated after a dermal uptake of BPA that would generate the same concentration of free BPA in plasma (considered as the bioactive form) as would a 24 h-averaged intake to the European Chemicals Agency (ECHA)'s oral DNEL of 8 µg BPA/kg bw/day set for workers. The predicted concentration of urinary total BPA at steady-state is equivalent to, or exceeds the 95th percentile of total BPA in urine measured in different European HBM studies conducted in the general population. Thus, no HBM-GV_Worker was proposed, as the high background level of BPA coming from environmental exposure - mostly through food intake - is making the discrimination with the occupational exposure to BPA difficult.

Endocrine disruptors and gut microbiome interactions

Anthropogenic environmental pollutants affect many physiological, biochemical, and endocrine actions as reproduction, metabolism, immunity, behavior and as such can interfere with any aspect of hormone action. Microbiota and their genes, microbiome, a large body of microorganisms, first of all bacteria and co-existing in the host´s gut, are now believed to be autonomous endocrine organ, participating at overall endocrine, neuroendocrine and immunoendocrine regulations. While an extensive literature is available on the physiological and pathological aspects of both players, information about their mutual relationships is scarce. In the review we attempted to show various examples where both, endocrine disruptors and microbiota are meeting and can act cooperatively or in opposition and to show the mechanism, if known, staying behind these actions.

Biomonitoring of occupational exposure to bisphenol A, bisphenol S and bisphenol F: A systematic review

Bisphenol A (BPA) and its substitutes bisphenol S (BPS) and bisphenol F (BPF) are endocrine disrupting chemicals widely used in the production of polycarbonate plastics, epoxy resins and thermal papers. The aim of the review was to identify occupational studies using human biomonitoring (HBM) as a tool for bisphenol exposure assessment and to characterize research gaps on the topic as part of the HBM4EU project. Hence, a systematic literature search using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) methodology was conducted for articles published between 2000 and 27th March 2020 across three databases (PubMed, Scopus and Web of Science). Thirty studies on the occupational HBM of BPA met the inclusion criteria. Regarding BPS and BPF, only 4 and 2 publications were retrieved, respectively. Fifty-seven percent (57%) of the studies selected for BPA were conducted in Asia whereas half of BPS and BPF studies were undertaken in Europe. Studies on BPA in plastic and epoxy resin sectors were infrequent in Europe while Asian data showed higher exposure when the substance is employed as raw material. The main data on BPS were among cashiers while BPF data were available from incinerator workers. Several research gaps have been identified: (i) shortage of HBM studies on occupational exposure, especially to BPS and BPF; (ii) different methodological designs making suitable comparisons between studies difficult; and (iii) only few studies conducted on the industrial applications of bisphenols outside Asia. This review highlights the lack of recent occupational HBM studies on bisphenols and the need for a harmonized approach to acquire reliable data. Considering the increasing replacement of BPA by BPS and BPF, it is of relevance to evaluate the exposure to these substances and the impact of the available risk management measures on workers exposure and possible health risk.

Proteomic profile of the effects of low-dose bisphenol A on zebrafish ovaries

Human exposure to bisphenol-A (BPA) is largely unavoidable because BPA is an environmental contaminant found in soil, water, food and indoor dust. The safety of authorized BPA amounts in consumer products is under question because new studies have reported adverse effects of BPA at doses far below that previously established by the NOAEL (50 μg/kg per day). To protect public health, the consequences of low-dose BPA exposure in different organs and organismal functions must be further studied to generate relevant data. This study attempted to investigate the effects and potential molecular mechanisms of short-term exposure to 1 μg/L BPA on zebrafish ovarian follicular development. We observed only minor changes at the histopathological level with a small (3 %) increase in follicular atresia. However, a shotgun proteomics approach indicated deep alterations in BPA-exposed ovarian cells, including induction of the oxidative stress response, metabolic shifts and degradome perturbations, which could drive oocytes towards premature maturation. Based on these results, it could be suggested that inadvertent exposure to small concentrations of BPA on a continuous basis causes alteration in biological processes that are essential for healthy reproduction.

A new LC/MS method for specific determination of human systemic exposure to bisphenol A, F and S through their metabolites: Application to cord blood samples

Due to restriction of the use of BPA, several structural analogues such as BPS and BPF have been proposed for its replacement in many consumer products. This has increased the prevalence of BPS and BPF in urine from tested cohorts. However, these substitutes have similar endocrine disrupting properties to BPA, particularly on reproductive and metabolic functions, which suggests that fetal exposure to these analogues could be of concern for human health. Bisphenols (BPs) are mainly metabolized to glucuronides (BP-Gs), which are considered as inactive but provide a relevant marker of fetal exposure during pregnancy. In most instances, these metabolites are indirectly quantified after hydrolysis and measurement of the corresponding native BPs, which may lead to bias due to spurious BPs contamination during blood collection and/or analyses. We have developed a new method for direct quantification of BP-Gs, which has the advantage of not being affected by errors related to the presence of BPs. First, BP-Gs were extracted from plasma by anion exchange solid phase extraction. They were then labelled with dansyl chloride, using experimentally-optimized incubation conditions, after which the dansyl derivatives were injected into an on-line SPE-UHPLC/MS/MS system. The performance of the method, in terms of sensitivity, precision and accuracy, was evaluated in plasma over a concentration range of 0.05-5 ng/mL. The intra- and inter-day CV% precision were lower than 20% with accuracies ranging from 93% to 115%. The limit of quantification was set at 0.05 ng/mL. The method was then applied to measure BP-Gs in forty-four cord plasma samples. Although no BPF-G was found, BPA-G and BPS-G was determined in almost half of the cord plasma samples with concentration ranges nd-0.089 ng/mL and nd-0.586 ng/mL, respectively.

Investigating the glucuronidation and sulfation pathways contribution and disposition kinetics of Bisphenol S and its metabolites using LC-MS/MS-based nonenzymatic hydrolysis method

Despite showing serious health consequences and widespread exposure, the toxicokinetic information required to evaluate the health risks of BPS is insufficient. Thus, we aim to describe the comprehensive toxicokinetics of BPS and its glucuronide (BPS-G) and sulfate (BPS-S) metabolites in rats. Simultaneous quantification of BPS and its metabolites (authentic standards) was accomplished using UPLC-MS/MS method. BPS displayed rapid absorption, extensive metabolism and fast elimination after oral administration. Following intravenous administration, BPS exhibited CL (8.8 L/h/kg) higher than the rat hepatic blood flow rate suggesting the likelihood of extrahepatic clearance. The CL value differed from those reported previously (sheep and piglets) and the probable reason could be attributed to dose- and/or interspecies differences. BPS was extensively metabolized and excreted primarily through urine as BPS-G (∼56%). BPS and BPS-S exhibited a high protein binding capacity in comparison to BPS-G. In in vitro metabolic stability study, BPS was predominantly metabolized through glucuronidation. The predicted in vivo hepatic clearance of BPS suggested it to be a high and intermediate clearance chemical in rats and humans, respectively. The significant interspecies difference observed in the clearance of BPS between rats and humans indicated that toxicokinetics of BPS should be considered for health risk assessment in humans.

Representative Bacillus sp. AM1 from Gut Microbiota Harbor Versatile Molecular Pathways for Bisphenol A Biodegradation

Human gut microbiota harbors numerous microbial species with molecular enzymatic potential that impact on the eubiosis/dysbiosis and health/disease balances. Microbiota species isolation and description of their specific molecular features remain largely unexplored. In the present study, we focused on the cultivation and selection of species able to tolerate or biodegrade the endocrine disruptor bisphenol A (BPA), a xenobiotic extensively found in food plastic containers. Chemical xenobiotic addition methods for the directed isolation, culturing, Whole Genome Sequencing (WGS), phylogenomic identification, and specific gene-encoding searches have been applied to isolate microorganisms, assess their BPA metabolization potential, and describe encoded catabolic pathways. BPA-tolerant strains were isolated from 30% of infant fecal microbial culture libraries analyzed. Most isolated strains were phylogenetically related to the operational taxonomic group Bacillus amyloliquefaciens spp. Importantly, WGS analysis of microbial representative strain, Bacillus sp. AM1 identified the four complete molecular pathways involved on BPA degradation indicating its versatility and high potential to degrade BPA. Pathways for Exopolysaccharide (EPS) and Polyhydroxyalkanates (PHA) biopolymer synthesis were also identified and phenotypically confirmed by transmission electronic microscopy (TEM). These microbial biopolymers could generally contribute to capture and/or deposit xenobiotics.

Bisphenol A and Metabolites in Meat and Meat Products: Occurrence, Toxicity, and Recent Development in Analytical Methods

Bisphenol A (BPA) is a commonly used compound in many industries and has versatile applications in polycarbonate plastics and epoxy resins production. BPA is classified as endocrine-disrupting chemical which can hamper fetal development during pregnancy and may have long term negative health outcomes in humans. Dietary sources, main route of BPA exposure, can be contaminated by the migration of BPA into food during processing. The global regulatory framework for using this compound in food contact materials is currently not harmonized. This review aims to outline, survey, and critically evaluate BPA contamination in meat products, including level of BPA and/or metabolites present, exposure route, and recent advancements in the analytical procedures of these compounds from meat and meat products. The contribution of meat and meat products to the total dietary exposure of BPA ranges between 10 and 50% depending on the country and exposure scenario considered. From can lining materials of meat products, BPA migrates towards the solid phase resulting higher BPA concentration in solid phase than the liquid phase of the same can. The analytical procedure is comprised of meat sample pre-treatment, followed by cleaning with solid phase extraction (SPE), and chromatographic analysis. Considering several potential sources of BPA in industrial and home culinary practices, BPA can also accumulate in non-canned or raw meat products. Very few scientific studies have been conducted to identify the amount in raw meat products. Similarly, analysis of metabolites and identification of the origin of BPA contamination in meat products is still a challenge to overcome.

Pregnancy-specific physiologically-based toxicokinetic models for bisphenol A and bisphenol S

Predictions from physiologically based toxicokinetic (PBTK) models can help inform human health risk assessment for potentially toxic chemicals in the environment. Bisphenol S (BPS) is the second most abundant bisphenol detected in humans in the United States, after bisphenol A (BPA). We have recently demonstrated that BPS, much like BPA, can cross the placental barrier and disrupt placental function. Differences in physicochemical properties, toxicokinetics, and exposure outcomes between BPA and other bisphenols prevent direct extrapolation of existing BPA PBTK models to BPS. The current study aimed to develop pregnancy-specific PBTK (p-PBTK) models for BPA and BPS, using a common p-PBTK model structure. Novel paired maternal and fetal pregnancy data sets for total, unconjugated, and conjugated BPA and BPS plasma concentrations from three independent studies in pregnant sheep were used for model calibration. The nine-compartment (maternal blood, liver, kidney, fat, placenta and rest of body, and fetal liver, blood and rest of body) models simulated maternal and fetal experimental data for both BPA and BPS within one standard deviation for the majority of the experimental data points, highlighting the robustness of both models. Simulations were run to examine fetal exposure following daily maternal exposure to BPA or BPS at their tolerable daily intake dose over a two-week period. These predictive simulations show fetal accumulation of both bisphenols over time. Interestingly, the steady-state approximation following this dosing strategy achieved a fetal concentration of unconjugated BPA to levels observed in cord blood from human biomonitoring studies. These models advance our understanding of bisphenolic compound toxicokinetics during pregnancy and may be used as a quantitative comparison tool in future p-PBTK models for related chemicals.

Potential Mechanisms of Bisphenol A (BPA) Contributing to Human Disease

Bisphenol A (BPA) is an organic synthetic compound serving as a monomer to produce polycarbonate plastic, widely used in the packaging for food and drinks, medical devices, thermal paper, and dental materials. BPA can contaminate food, beverage, air, and soil. It accumulates in several human tissues and organs and is potentially harmful to human health through different molecular mechanisms. Due to its hormone-like properties, BPA may bind to estrogen receptors, thereby affecting both body weight and tumorigenesis. BPA may also affect metabolism and cancer progression, by interacting with GPR30, and may impair male reproductive function, by binding to androgen receptors. Several transcription factors, including PPARγ, C/EBP, Nrf2, HOX, and HAND2, are involved in BPA action on fat and liver homeostasis, the cardiovascular system, and cancer. Finally, epigenetic changes, such as DNA methylation, histones modification, and changes in microRNAs expression contribute to BPA pathological effects. This review aims to provide an extensive and comprehensive analysis of the most recent evidence about the potential mechanisms by which BPA affects human health.

Toxicokinetics of bisphenol-S and its glucuronide in plasma and urine following oral and dermal exposure in volunteers for the interpretation of biomonitoring data

The measurement of bisphenol-S (BPS) and its glucurono-conjugate (BPSG) in urine may be used for the biomonitoring of exposure in populations. However, this requires a thorough knowledge of their toxicokinetics. The time courses of BPS and BPSG were assessed in accessible biological matrices of orally and dermally exposed volunteers. Under the approval of the Research Ethics Committee of the University of Montreal, six volunteers were orally exposed to a BPS-d8 deuterated dose of 0.1 mg/kg body weight (bw). One month later, 1 mg/kg bw of BPS-d8 were applied on 40 cm² of the forearm and then washed 6 h after application. Blood samples were taken prior to dosing and at fixed time periods over 48 h after treatment; complete urine voids were collected pre-exposure and at pre-established intervals over 72 h postdosing. Following oral exposure, the plasma concentration-time courses of BPS-d8 and BPSG-d8 over 48 h evolved in parallel, and showed a rapid appearance and elimination. Average peak values (±SD) were reached at 0.7 ± 0.1 and 1.1 ± 0.4 h postdosing and mean (±SD) apparent elimination half-lives (t_½) of 7.9 ± 1.1 and 9.3 ± 7.0 h were calculated from the terminal phase of BPS-d8 and BPSG-d8 in plasma, respectively. The fraction of BPS-d8 reaching the systemic circulation unchanged (i.e. bioavailability) was further estimated at 62 ± 5% on average (±SD) and the systemic plasma clearance at 0.57 ± 0.07 L/kg bw/h. Plasma concentration-time courses and urinary excretion rate profiles roughly evolved in parallel for both substances, as expected. The average percent (±SD) of the administered dose recovered in urine as BPS-d8 and BPSG-d8 over the 0-72 h period postdosing was 1.72 ± 1.3 and 54 ± 10%. Following dermal application, plasma levels were under the lower limit of quantification (LLOQ) at most time points. However, peak values were reached between 5 and 8 h depending on individuals, suggesting a slower absorption rate compared to oral exposure. Similarly, limited amounts of BPS-d8 and its conjugate were recovered in urine and peak excretion rates were reached between 5 and 11 h postdosing. The average percent (±SD) of the administered dose recovered in urine as BPS-d8 and BPSG-d8 was about 0.004 ± 0.003 and 0.09 ± 0.07%, respectively. This study provided greater precision on the kinetics of this contaminant in humans and, in particular, evidenced major differences between BPA and BPS kinetics with much higher systemic levels of active BPS than BPA, an observation explained by a higher oral bioavailability of BPS than BPA. These data should also be useful in developing a toxicokinetic model for a better interpretation of biomonitoring data.

Occurrence of bisphenol A and its alternatives in paired urine and indoor dust from Chinese university students: Implications for human exposure

Bisphenol analogs (BPs), as the industrial chemicals, are widely used in consumer products. Limited information exists regarding human exposure to BPs in university students in China. In this study, we detected concentrations of seven BPs, namely bisphenol A (BPA), bisphenol AF (BPAF), bisphenol P (BPP), bisphenol AP (BPAP), bisphenol Z (BPZ), bisphenol S (BPS), and bisphenol F (BPF), in paired urine (n = 160) and indoor dust samples (n = 40) from university students in South China. High detection rates and levels (median) was found in BPA in paired urine (99%, 3.57 ng/mL) and indoor dust (80%, 2.98 μg/g) samples, followed by BPS (88%, 0.24 ng/mL; 78%, 0.22 μg/g). These findings suggest that BPA remains the major BPs used in consumer products. A positive relationship between urinary ∑BPs (sum of six BPs) concentration and indoor dust was observed (r = 0.444, p < 0.01), indicated that exposure to non-dietary BPs may also be significant to human exposure. The median EDI_urine values (ng/kg bw/day) of ∑BPs in males (119.6) were relatively higher than (p < 0.05) those in females (84.6). By contrast, the median EDI_dust of BPs (except for BPAF) in dust form female dormitories were slightly higher than that in dust from male dormitories. Notably, BPF was the most ingested from indoor dust (dormitory dust). This study is the first time to document the occurrence of BPs in paired urine and indoor dust in university students from China.

Benzothiadiazole functionalized Co-doped MIL-53-NH2 with electron deficient units for enhanced photocatalytic degradation of bisphenol A and ofloxacin under visible light

Nowadays, designing highly active photocatalysts for pollutant degradation under visible light still remains a challenging problem. Herein, a novel benzothiadiazole functionalized Co-doped MOF-based photocatalyst with electron deficient unit was first synthesized via a feasible step-by-step assembly strategy. Benzothiadiazole, as typical electron deficient group, could effectively promote the separation and transfer of photoinduced charge carriers. The implantation of Co ion could be served as an effective mediator to further facilitate the charge transfer through a Co³⁺/Co²⁺ redox pathway. Interestingly, the as-synthesized Co-MIL-53-NH-BT exhibited significantly enhanced photocatalytic degradation capacity for BPA and OFX under visible light irradiation, with removal efficiency as high as 99.9 % and 99.8 % within 120 min. TOC analysis suggested that majority of contaminants had been degraded into CO₂ and H₂O. The important parameters influencing the photocatalytic activity were investigated, and the kinetics study was also conducted. The possible degradation pathways and the possible photocatalytic mechanism were proposed. More importantly, the as-synthesized Co-MIL-53-NH-BT showed good reusability, stability as well as universal applicability. To sum up, current work not only developed an efficient and visible-light active photocatalyst for treating organic-contaminated wastewater, but also afforded some novel insight into the utilization of benzothiadiazole in MOF-based photocatalyst towards improving photocatalytic activity.

Development of analytical method of melamine in placenta from pregnant women by isotope-dilution liquid chromatography/tandem mass spectrometry

RATIONALE

Melamine is ubiquitously present in our daily life. It has a known effect on the kidneys, but it may also adversely affect the reproduction system. We have developed an analytical method for measuring melamine levels in maternal placenta and correlated these levels with melamine concentrations in urine, a necessary step in finding out if melamine might cross the placenta and enter the circulation of the fetus.

METHODS

We used liquid-liquid extraction, clean up by solid-phase extraction (SPE), and isotope-dilution liquid chromatography/tandem mass spectrometry (LC/MS/MS) to measure melamine in placenta specimens. The results of this method were assessed for linearity, limits of quantitation (LOQs), and intra- and inter-assay precision as well as accuracy, matrix effect, and recovery rate.

RESULTS

Calibration curves indicated good linearity (r >0.995) over concentrations ranging from 5 to 500 ng/mL in placenta specimens, intra- and inter-assay precision from 0.89% to 27.07%, and accuracy from 92.4% to123.5%. Recovery ranged from 63.9 to 83.9%, and the LOQ was 5 ng/mL in placenta (0.2 g). Placental melamine levels ranged from 7.87 to19.64 ng/mL, all detectable (n = 8). Pregnant women with higher levels of urinary melamine had higher placenta melamine levels than those with non-detectable urinary melamine, though the results were not significantly different (p = 0.149, n = 4 in each group).

CONCLUSIONS

The results of this study suggest that pregnant women were exposed to low doses of melamine in their daily lives as measured in urine samples and placenta specimens. It is unclear whether placenta melamine concentrations can better represent long-term exposure than urine or whether melamine in the uterus can enter the fetus via this route.

Canned food intake and urinary bisphenol a concentrations: a randomized crossover intervention study

Bisphenol A (BPA) is an endocrine disruptor. To evaluate the effect of canned food consumption on internal BPA dose, urinary BPA concentrations were measured before and after intake of canned foods. This study applied a randomized crossover design, recruited 20 healthy volunteers, and divided them into two groups. One group consumed canned food; the other group consumed fresh food. After a 1-day washout, the dietary interventions were reversed. In each period, urine samples were collected immediately before meals and then 2 h, 4 h, and 6 h after meals. A mixed-effects model was used to assess BPA changes over time. Our results showed urinary BPA concentrations increased after consumption of canned food. Specifically, urinary BPA concentrations significantly differed between consumption of canned food and fresh food at 2 h, 4 h, and 6 h after intake (p values of 0.001, < 0.001, and < 0.001, respectively). Mean BPA concentrations at 2 h, 4 h, and 6 h after meals were 152%, 206%, and 79% higher, respectively, than mean BPA concentrations before meals. Urine concentration profiles of canned food intake showed that peaks were at 4 h, the increase diminished at 6 h, and returned to baseline levels at 24 h after intake. Therefore, dietary intervention and a 1-day washout period are effective for limiting internal BPA burden. This study provides convincing evidence of a human exposure route to BPA and a basis for designing interventions to mitigate exposure.

Toxicokinetics of bisphenol A, bisphenol S, and bisphenol F in a pregnancy sheep model

Bisphenol A (BPA), S (BPS), and F (BPF) are among the most abundant bisphenols detected in humans, yet pregnancy toxicokinetics for BPS or BPF remain unknown. Because gestational BPS can disrupt placental function and result in reproductive and metabolic disorders in the progeny, the aim of the study was to investigate BPS and BPF toxicokinetics during pregnancy using an in vivo approach. Fetal catheterizations were conducted in pregnant sheep (n = 6) at mid-pregnancy and injected with either a single dose of BPS (n = 3, 0.5 mg/kg, s.c.), or a combination of BPS, BPF, and BPA (n = 3, 0.5 mg/kg for each chemical, s.c.). Maternal and fetal blood and urine and amniotic fluid were collected over 72 h and analyzed for bisphenols by HPLC-MS/MS. We observed significant differences in half-life, maximum concentration, and total body clearance in maternal circulation among bisphenols. Longer half-lives were observed in fetal vs. maternal circulation for all bisphenols. Fetal toxicokinetics differed among bisphenols with BPS having the longest fetal half-life. All bisphenols reached basal levels at 48 h in maternal plasma, but were still detectable in amniotic fluid, fetal urine, and fetal plasma at 72 h. In this first pregnancy toxicokinetic study of BPS and BPF we have demonstrated maternal and fetal toxicokinetic differences among all three bisphenols. Higher BPS persistence in the fetal compartment warrants studies into progeny adverse outcomes following gestational exposure. Additionally, toxicokinetic differences among bisphenols call for a more careful approach when extrapolating kinetic information from one bisphenol chemical to another.

Insights into the effect and interaction mechanism of bisphenol S on lipids hydrolysis in sludge through multi-spectra, thermodynamics, and molecule docking analysis

As an alternative to bisphenol A, bisphenol S (BPS) is widely used in industrial production and daily life, which is then discharged into sewage treatment plants and accumulates in sludge. In this research, impact and interaction mechanism of BPS on lipids hydrolysis in sludge is studied from the respect of soluble organic matter and volatile organic fatty acids (VFAs). Multi-spectra, thermodynamics, molecule docking, and enzyme activity assay are applied to elucidate the effect mechanism of BPS on lipids hydrolysis. Results show that lipids hydrolysis is restrained due to the denaturation of lipase with BPS exposure. The interaction mechanism is involved in hydrophobic bond and hydrogen bond interaction in the activity region of lipase. This interaction not only results in an unfolding skeleton structure of lipase and a less hydrophobic microenvironment of tyrosine and tryptophan residues but also leads to fluorophore static quenching with the formation of lipase-BPS complex. The experimental results and the combined research methods not only contribute to the development of novel technique for sludge treatment containing micropollutant but also profit to clarify the interaction mechanism between other micropollutant and enzymes.