Interactions of microplastics with organic, inorganic and bio-pollutants and the ecotoxicological effects on terrestrial and aquatic organisms

New insight into intestinal toxicity accelerated by aged microplastics with triclosan: Inflammation regulation by gut microbiota-bile acid axis

The combined toxic effects of microplastics (MPs) and their carried contaminants on organisms have been widely concerned; however, the health risks and its mechanism of "gut microbiota-host metabolism (bile acids, BA)" remain unknown. Herein, Xenopus tropicalis were exposured to aged polystyrene MPs carried triclosan (aPS+TCS) and single (a)PS-MPs & TCS, respectively. The bioaccumulation of TCS in the gut of X. tropicalis was significantly increased in aPS+TCS group, which was 89 % higher than that of PS+TCS group, causing more severe oxidative stress, inflammation and intestinal barrier disruption (leaky gut). The expressions of TNF-α, IL-6 and IL-10 in aPS+TCS group were enhanced by 276 % and 19 % and decreased by 81 %, respectively, compared to that in PS+TCS group. Moreover, co-exposure to aPS+TCS increased the number of Escherichia coli, and reduced levels of DCA and LCA (secondary BAs). Multiomics analysis further revealed that the intestinal toxicity of aPS+TCS to X. tropicalis was mainly influenced by the gut flora, BA metabolism and inflammation-related pathways. Co-exposure may exacerbate inflammation by increasing the blood levels of lipopolysaccharides and inhibiting secondary BA production, which are regulated by the gut microbiota-bile acid axis. This study provides new insights in the potential mechanisms of intestinal damage from pollutant-loaded aged MPs.

Microplastics in wastewater treatment plant: Characterization of changes, influencing factors, and their impact on the spatial distribution of pathogenic bacteria

Wastewater treatment plants (WWTPs) have been proposed as pivotal convergence points for microplastics (MPs) and hotspots of bacterial pathogens. In this study, the characteristics of MPs and bacteria in the sewage/sludge were investigated and their relationship was formulated. Meanwhile, this study innovatively focused on the impact of MPs on microbial aerosolization process in WWTP. MPs and pathogenic bacteria were identified in sewage/sludge samples from all treatment steps, in which the levels and compositions of them vary. However, Bacillus, Planifilum, Achromobacter, and Geobacillus were the dominant genera in bioaerosol samples. The dominant shape of MPs was fibers and fragments. The main size range of MPs were 0.5 - 1 mm, with the primary type of polyethylene and polypropylene. White was the most prevalent color. Furthermore, a significant correlation between MPs and bacterial community structure in sewage/sludge was observed. The abundance and some characteristics of MPs showed positive correlations with the relative abundances of some potential pathogens, including Bacillus, Pseudomonas, Staphylococcus, Acinetobacter and Achromobacter. Aeration experiments demonstrated that the presence of MPs exerted an influence on the microbial aerosolization process. Collectively, this study provides a better understanding of the relationship between MPs and bacterial structures in a WWTP and offers new insights to the role of MPs on the microbial aerosolization process. The findings will provide a basis for the control and reduction of MPs and bacterial pathogens in WWTPs.

Integration of machine learning and meta-analysis reveals the behaviors and mechanisms of antibiotic adsorption on microplastics

Microplastics (MPs) can adsorb antibiotics (ATs) to cause combined pollution in the environment. Research on this topic has been limited to specific types of MPs and ATs, resulting in inconsistent findings, particularly for the influencing factors and adsorption mechanisms. Therefore, this study combined meta-analysis and machine learning to analyze a dataset comprising 6805 records from 123 references. The results indicated that polyamide has the highest adsorption capacity for ATs, which is primarily attributed to the formation of hydrogen bonds by its N-H groups, and MPs exhibited the strongest affinity for chlortetracycline because the CO and -Cl groups in chlortetracycline form hydrogen and halogen bonds with MPs. Moreover, the particle size, MP and AT concentrations, and pH were key factors affecting the adsorption process with notable interaction effects. Hydrogen bonding and electrostatic interaction were commonly involved in the adsorption of ATs onto MPs. Finally, an interactive graphical user interface was deployed to predict the adsorption amount, affinity constant, and maximum adsorption capacity of MPs for ATs, with results aligning well with the latest published data. This study provides crucial insights into the behavior of MPs carrying ATs, thereby facilitating accurate assessment of the combined environmental risks of them.

Microplastics indirectly affect soil respiration of different-aged forest by altering microbial communities and carbon metabolism

This study explored how microplastics impact soil respiration processes in forests of varying ages by modulating the structure of microbial communities and carbon metabolic functions. The findings indicated that the abundance of microplastics in different aged forests was approximately 600-3858 items∙kg-1. The 10-year-old Pinus massoniana forest exhibited the lowest, and the 60-year-old forest had the highest microplastic abundance. The microplastics mainly consisted of fibers (26.57-38.38 %), particles sized 0-0.1 μm (40.28-70.19 %), and black particles (6.92-43.46 %). The soil respiration rate decreases with increasing forest age. However, the microplastics indirectly modified soil respiration by influencing total organic carbon (TOC) and soil pH. The functional prediction analysis showed that metabolic pathways such as formaldehyde assimilation, ribulose monophosphate pathway, and the hydroxypropionate-hydroxybutylate cycle, were significantly correlated with microplastic abundance. Structural equation model (SEM) results suggested that microplastics affected microbial carbon metabolic demands by altering microbial community structure (0.44) or directly influencing carbon metabolic pathways (0.68). Consequently, this impacts soil CO2 emissions. The findings provide new insights into the critical role of forest soils in mitigating carbon emissions caused by microplastics.

Non-degradable microplastic promote microbial colonization: A meta-analysis comparing the effects of microplastic properties and environmental factors

Microplastics serve as favorable substrates for microbial colonization, promoting biofilm formation, which consequently facilitates the accumulation of pollutants and aids in the degradation of microplastics. Hence, obtaining a thorough comprehension of the factors that influence the development of microplastic biofilms is imperative. Nevertheless, there have been conflicting responses concerning biofilm formation in conjunction with microplastic characteristics and environmental conditions. As a result, a meta-analysis was conducted to quantitatively evaluate the impact of microplastic properties and environmental factors on biofilm formation. The findings indicated that the type and size of microplastics significantly influence biofilm growth on their surfaces. Non-degradable microplastics, particularly polyvinyl chloride (PVC) and polystyrene (PS), exhibited higher surface biomass and biodiversity in microplastic-attached biofilms compared to degradable microplastics. Furthermore, it was observed that smaller microplastics were more conducive to microbial colonization. Model selection and correlation analysis further indicated that the environment acts as a substantial predictor of biofilm formation, with prolonged exposure significantly enhancing microbial diversity within biofilms as opposed to short-term exposure. Moreover, meta-regression analysis illustrated a positive correlation between biofilm biomass and alpha-diversity with temperature, while salinity exhibited a negative correlation in diverse aquatic settings. Notably, the ease of biofilm formation on microplastics was observed to be greater in oceans compared to lakes, yet biofilms exhibited a higher diversity increment in lakes than their oceanic counterparts. In the long-term growth of biofilms, initial biomass and diversity are influenced by microplastic characteristics and the surrounding environment, although environmental influences may assume more significance as time progresses.

Interaction of Polystyrene Nanoplastics with Biomolecules and Environmental Pollutants: Effects on Human Hepatocytes

The inevitable exposure of humans to micro/nanoplastics has become a pressing global environmental issue, with growing concerns regarding their impact on health. While the direct effects of micro/nanoplastics on human health remain largely unknown, increasing attention is being given to their potential role as carriers of environmental pollutants and organic substances. This study investigates the direct toxicity of 500 nm polystyrene nanoplastics (NPs) on human hepatocytes (HepG2) in vitro, both alone and in combination with cadmium (Cd), a hazardous heavy metal and a prevalent environmental pollutant. One-hour exposure to 100 µg/mL of NPs causes a significant increase in ROS production (+25% compared to control) but cell viability remains unaffected even at concentrations much higher than environmental levels. Interestingly, NPs significantly reduce Cd cytotoxicity at LC50 concentrations (cell viability compared to control: 55.4% for 50 µM Cd, 66.9% for 50 µM Cd + 10 µg/mL NPs, 68.4% for 50 µM Cd + 100 µg/mL NPs). Additionally, NPs do not alter the cellular lipid content after short-term exposure (24 h). However, when Cd and fatty acids are added to the medium, NPs appear to sequester fatty acids, reducing their availability and impairing their uptake by cells in a dose-dependent manner. We confirmed by Dynamic Light Scattering and Scanning Electron Microscopy the interaction between NPs, Cd and free fatty acids. Although polystyrene NPs exhibited minimal cytotoxicity in our experimental model, collectively our findings suggest that predicting the effects of cell exposure to NPs is extremely challenging, due to the potential interaction between NPs, environmental pollutants and specific components of the biological matrix.

Microplastic in upper Himalayan Ganga river: Occurrence, seasonal dynamics and ecological risk

Ganga river supports about 500 million population in the Gangetic Plain. Still, the occurrence of toxic pollutants in the Ganga river is an emerging concern, questioning its ecological health. This study is the first to quantify the microplastic (MP) and its characteristics, seasonal dynamics (pre-monsoon and post-monsoon), and environmental risk in the 19 sites (sample size, n = 228) in the upper Himalayan stretch of Ganga (Devprayag, Zone-I; Rishikesh, Zone-II; Haridwar, Zone-III) with multiples sampling (6 months). Average MP particles were found in the range of 100-1550 particles/L in water and 50-1300 particles/kg in sediment samples. MP flux showed an increased trend (Zone-I < Zone-II < Zone-III) while the river flows from the foothills of the Himalayas to densely populated bank cities. MP-sized 500 μm to 5 mm were dominant in sediment (45.68 %) and water (52.73 %) during pre-monsoon. MP-sized 500 μm to 5 mm, 250 μm to 500 μm, and 50 μm to 250 μm were found to be 45.68 %, 27.57 %, and 26.75 % in water and 52.73 %, 23.03 %, and 24.24 % in sediments, respectively with abundance during post-monsoon. μATR-FTIR analysis revealed polyethylene, polyamides and polystyrene as dominant polymers and no drastic change occurred in polymer types between studied seasons. The fibers were the predominant particle type, followed by fragments and films across the studied stretch of the Ganga river. The pollution load index suggested that Zone-I and Zone-II fall under hazard category 1 while Zone-III in category 2. Polymer hazard index and potential ecological risk index data suggested an extreme pollution level of MP in a studied stretch of the Ganga river. This study emphasizes the adverse impacts of beach activities, tourist accommodations, and open waste disposals on river health, highlighting the urgent action required for effective plastic waste management. We urged a comprehensive study on MPs in the Ganga river basin, which serves as pathways and sinks for these particles into the ocean.

Ferroptosis induced by environmental pollutants and its health implications

Environmental pollution represents a significant public health concern, with the potential health risks associated with environmental pollutants receiving considerable attention over an extended period. In recent years, a substantial body of research has been dedicated to this topic. Since the discovery of ferroptosis, an iron-dependent programmed cell death typically characterized by lipid peroxidation, in 2012, there have been significant advances in the study of its role and mechanism in various diseases. A growing number of recent studies have also demonstrated the involvement of ferroptosis in the damage caused to the organism by environmental pollutants, and the molecular mechanisms involved have been partially elucidated. The targeting of ferroptosis has been demonstrated to be an effective means of ameliorating the health damage caused by PM2.5, organic and inorganic pollutants, and ionizing radiation. This review begins by providing a summary of the most recent and important advances in ferroptosis. It then proceeds to offer a critical analysis of the health effects and molecular mechanisms of ferroptosis induced by various environmental pollutants. Furthermore, as is the case with all rapidly evolving research areas, there are numerous unanswered questions and challenges pertaining to environmental pollutant-induced ferroptosis, which we discuss in this review in an attempt to provide some directions and clues for future research in this field.

Effect of microplastics concentration and size on pollutants removal and antibiotic resistance genes (ARGs) generation in constructed wetlands: A metagenomics insight

The accrual of microplastics (MPs) and antibiotics poses synergistic threats to the environment. This study systemically examined the effect of environmental-level (μg/L) MPs (90-110 µm) and nanoplastics (NPs, 700 nm) on constructed wetlands (CWs) treating oxytetracycline-contaminated wastewater via metagenomics analysis. Polystyrene (PS) MPs notably hindered the removal of nitrogen, phosphorus, and oxytetracycline, particularly at high level (1000 μg/L), with removal rates of 73.34 %, 59.59 %, and 99.34 %, respectively. Among them, the removal of NH4+-N decreased the most in comparison to CK, at 15.26 %. Antibiotic resistance genes (ARGs) copies/16S rRNA ranged from 0.26 to 0.42 in CWs, exceeding that found in rivers by a factor of 1.5 to 2.5 times. The relative abundance of multidrug resistance genes (mdtB, acrB, mexF, mdtC, and mexT) and tetracycline resistance genes (txtA, tetG, and tetP) exhibited a pronounced increase under MPs exposure, ranging from 0.06 to 0.14 and 0.01 to 0.08 copies/16S rRNA, respectively. Redundancy and network analyses emphasized robust associations among contaminant reduction, ARG abundance, and microbial community. Partial least squares path modeling indicated MPs exerted a more profound influence on pollutant removal (coefficient = 0.8194), microbial community (coefficient = 0.3358) and ARGs dissemination (coefficient = 0.6566) compared to NPs. MPs concentrations significantly affects pollutants removal and ARGs proliferation, and MPs with larger sizes amplified ARG dissemination. This research highlights the influence of MPs on CW-mediated wastewater treatment and ARGs accumulation, offering valuable insights for developing ecological wastewater treatment strategies tailored to multi-pollutant scenarios. These insights are fundamental in developing sustainable solutions to the adverse impacts of MPs on ecosystems.

Food packaging solutions in the post-per- and polyfluoroalkyl substances (PFAS) and microplastics era: A review of functions, materials, and bio-based alternatives

Food packaging (FP) is essential for preserving food quality, safety, and extending shelf-life. However, growing concerns about the environmental and health impacts of conventional packaging materials, particularly per- and polyfluoroalkyl substances (PFAS) and microplastics, are driving a major transformation in FP design. PFAS, synthetic compounds with dual hydro- and lipophobicity, have been widely employed in food packaging materials (FPMs) to impart desirable water and grease repellency. However, PFAS bioaccumulate in the human body and have been linked to multiple health effects, including immune system dysfunction, cancer, and developmental problems. The detection of microplastics in various FPMs has raised significant concerns regarding their potential migration into food and subsequent ingestion. This comprehensive review examines the current landscape of FPMs, their functions, and physicochemical properties to put into perspective why there is widespread use of PFAS and microplastics in FPMs. The review then addresses the challenges posed by PFAS and microplastics, emphasizing the urgent need for sustainable and bio-based alternatives. We highlight promising advancements in sustainable and renewable materials, including plant-derived polysaccharides, proteins, and waxes, as well as recycled and upcycled materials. The integration of these sustainable materials into active packaging systems is also examined, indicating innovations in oxygen scavengers, moisture absorbers, and antimicrobial packaging. The review concludes by identifying key research gaps and future directions, including the need for comprehensive life cycle assessments and strategies to improve scalability and cost-effectiveness. As the FP industry evolves, a holistic approach considering environmental impact, functionality, and consumer acceptance will be crucial in developing truly sustainable packaging solutions.

Comprehensive understanding of microplastics in compost: Ecological risks and degradation mechanisms

The introduction of microplastics (MPs) into soil ecosystems via compost application has emerged as a critical environmental concern. However, the ecological risks and degradation behavior of MPs in compost remain insufficiently understood. This review addresses these gaps by synthesizing recent findings on MPs in composting systems, focusing on their sources, impacts on compost quality, ecological risks, and degradation mechanisms. MP sources vary significantly across compost matrices-domestic waste, sludge, and agricultural waste‑leading to differences in their types and quantities. MPs adversely impact compost quality by disrupting its physical structure and impairing fertility, aeration, and water retention. Furthermore, their persistence after compost application can result in long-term environmental accumulation, posing risks to soil ecosystems and biological health. This review also explores the aging and degradation of MPs during composting, a complex process influenced by physical, chemical, and biological mechanisms. Finally, we propose future research directions, emphasizing the development of standardized methodologies to assess MP behavior in compost and strategies to mitigate associated risks. These insights contribute to advancing sustainable waste management and environmental protection practices.

Adsorption of neonicotinoid insecticides by mulch film-derived microplastics and their combined toxicity

Mulch films allow for efficient crop production, yet their low recovery after use causes severe microplastics (MPs) pollution in agricultural soils. MPs in agricultural environments undergo complex ageing processes, which can alter their interactions with coexisting neonicotinoids and result in unpredictable ecological risks. Here, polyethylene (PE) and polybutylene adipate terephthalate (PBAT), typical mulch films, were chosen for the preparation of PE-MPs and PBAT-MPs. The adsorption of two common neonicotinoids, imidacloprid and dinotefuran, by the two MPs and their joint toxicity were examined. We found that the specific surface area of PBAT-MPs (7.59 m2 g-1) is greater than that of PE-MPs (2.83 m2 g-1), which results in a greater adsorption capacity for neonicotinoids. Additionally, ageing increased the adsorption capacity of MPs for neonicotinoids by 37.50-40.68 % for PBAT-MPs and 44.23-72.34 % for PE-MPs. This enhancement is attributed to the introduction of additional oxygen-containing functional groups on the MPs' surfaces, which can form hydrogen bonds with the amino groups in imidacloprid and dinotefuran. Furthermore, compared to single MPs and neonicotinoids, stronger inhibition in the growth of Escherichia coli and the germination of lettuce seeds was observed when they coexisted. This study highlights the importance of assessing the interactions between MPs and neonicotinoids and their joint toxicity, thereby improving our understanding of the potential risks of MPs towards the agricultural ecosystems.

Enhanced competitiveness of Spirodela polyrhiza in co-culture with Salvinia natans under combined exposure to polystyrene nanoplastics and polychlorinated biphenyls

Micro- and nanoplastics (MNPs) and polychlorinated biphenyls (PCBs) are prevalent in the environment and pose potential threats to ecosystems. However, studies on the phytotoxicity of MNPs and PCBs on primary producers are limited. This study investigated the effects of polystyrene nanoplastics (PS-NPs, 10 mg/L) and 2,2',5,5'-tetrachlorobiphenyl (PCB-52, 0.1 mg/L), on the growth of Spirodela polyrhiza and Salvinia natans, and their impact on plant competitive ability under co-culture conditions. Laser confocal microscopy images revealed that PS-NPs accumulated on the leaf and root surfaces of both species. Combined exposure to PS-NPs and PCB-52 significantly inhibited the average specific and relative growth rates (RGR) of both species, reduced chlorophyll a and b levels, and slightly increased carotenoid content, disrupting the photosynthetic system. PCB-52 exacerbated PS-NPs accumulation on plants, leading to increased hydrogen peroxide (H2O2) and superoxide anion (O2-) production in both roots and leaves. This affects the activity of superoxide dismutase (SOD), peroxidase (POD), malondialdehyde (MDA), and the soluble protein content. The combined treatment with PS-NPs and PCB-52 induced greater ecological stress in both species than the treatment with PS-NPs alone. In addition, the combined treatment with PS-NPs and PCB-52 significantly improved the relative yield and competition balance index of S. polyrhiza, indicating that PS-NPs + PCB-52 enhanced the competitive ability of S. polyrhiza when co-cultured with S. natans. This study confirmed the effects of co-exposure to PS-NPs and PCB-52 on aquatic plant growth and species competition, contributing to better insight into the ecological impacts of MNPs and organic pollutants.

Microfibre pollution: An emerging contaminant, alarming threat to the global environment

Microfibres, mostly obtained from home laundry, textiles, industrial materials, sewage effluents, and sludge, are considered the main source of environmental pollution, which has become a prevalent threat to terrestrial and aquatic creatures. Global population growth and industrialization have led to a rise in fibre consumption and production, which spread its network in drinking water, beer, and seafood. Focusing on the alarming threat of microfibre towards the natural environment, we have penned an extensive review article about microfibre pollution. The manuscript is divided into various subparts, such as the introductory portion, which briefly summarizes the sources and presence of various hazardous pollutants in the environment, followed by a detailed discussion about microfibre. The second part elaborates on the sources and distribution of microfibreous pollutants and the third portion discloses the toxic chemicals utilized or produced from functionalization, as well as the negative implications of microfibre on the environment. The fourth part discloses the leading application strategies to diminish microfibre pollution by controlling the sources and the development of various remediations. The last portion deals with the future and critical aspects of microfibre contamination. The authors hope this review article will boost its domain in environmental chemistry, sustainable development and environmental engineering from academic to industrial level as it helps researchers in particular and academics in general.

Environmental problems of emerging toxic metals and treatment technology and methods

The increasing industrial use of toxic metals essential for modern electronics and renewable energy presents significant environmental and health challenges. This review was needed to address the environmental risks posed by toxic metals, particularly those accumulating in soil and sediment ecosystems. The objective is to examine the sources of toxic metal pollution, their ecological impacts, and the effectiveness of existing treatment technologies. By comprehensively reviewing the recent literature, we analyzed the physiological and molecular responses of plants to toxic metals, focusing on their toxicity mechanisms. Key parameters measured include toxic metal concentration, soil and sediment health, microbial diversity, and plant stress responses. Our findings highlight that toxic metals, such as lithium, nickel, and indium, fueled by industrial activities, including mining and electronic waste disposal, significantly disrupt ecosystems. These metals bioaccumulate, harming soil microbial communities and aquatic life. For instance, in soil ecosystems, cadmium and lead inhibit microbial functions, while in aquatic systems, resuspension of sediment-bound metals leads to persistent contamination. Data show that phytoremediation and microbial techniques are effective in reducing toxic metal concentrations up to 30-40%. In conclusion, long-term monitoring and sustainable remediation strategies are essential to mitigate these environmental impacts. Future efforts should focus on enhancing the efficiency of bioremediation techniques and integrating these methods into global toxic metal management practices.

Enlarging effects of microplastics on adsorption, desorption and bioaccessibility of chlorinated organophosphorus flame retardants in landfill soil particle-size fractions

Chlorinated organophosphorus flame retardants (Cl-OPFRs) and microplastics (MPs) are emerging pollutants in landfills, but their synergistic behaviors and triggering risks were rarely focused on, impeding the resource utilization of landfill soils. This study systematically investigated the adsorption/desorption behaviors, bioaccessibility and human health risks of Cl-OPFRs in landfill soil particle-size fractions coexisted with MPs under simulated gastrointestinal conditions. The results showed that the adsorption capacity and bioaccessibility of Cl-OPFRs in humus soil were higher than that in subsoil. MPs promoted the adsorption of tris(1-chloro-2-methylethyl) phosphate (TCPP) and tris(1,3-dichloro-2-propyl) phosphate (TDCPP) in landfill soils by up to 34.6 % and 34.1 % respectively, but inhibited the adsorption of tris(2-chloroethyl) phosphate (TCEP) by up to 43.6 %. The bioaccessibility of Cl-OPFRs in landfill soils was positively correlated with MPs addition ratio but negatively correlated with the KOW of Cl-OPFRs, soil organic matter and particle size. MPs addition increased the residual concentration of Cl-OPFRs and significantly increased the bioaccessibility of TCEP and TDCPP by up to 33.1 % in landfill soils, resulting in higher carcinogenic and noncarcinogenic risks. The study presents the first series of the combined behavior and effects of MPs and Cl-OPFRs in landfill soils, and provides a theoretical reference for landfill risk management.

Microplastics-biofilm in aquatic ecosystem: Formation, pollutants complexation, greenhouse gas emission and ecotoxicology

The omnipresent microplastics (MPs) have gradually become a significant environmental problem due to its adverse consequences for ecological systems. MPs serve as substrates for biofilms colonization, which enhances adsorption of harmful contaminants on MPs surface in the aquatic ecosystem. The present study provides a critical discussion on the mechanism involved in MPs-biofilm formation, microbial colonization and the robust factors influencing the process in the aquatic ecosystem. Subsequently, the impact of MPs-biofilm on adsorption of inorganic and organic contaminants is explored. The ecological significance of MPs-biofilm associated pollutant complex for promoting greenhouse gases (GHGs) emissions from aquatic ecosystem is extensively discussed for understanding the climatic risk. Furthermore, the discussion is extended over ecotoxicological impact of MPs-biofilm on aquatic biodiversity and humans. The protective extracellular polymeric substances secreted by colonised bacteria over MPs during biofilm formation creates sticky MPs surface for heteroaggregates formation with swift adsorption of chemical compounds and microorganisms. MPs with functional aromatic groups facilitate the bacterial adhesion on the surface, but affect formation of biofilm. Alternatively, MPs-biofilm promotes the Mn and Fe hydrous oxides formation that can co-precipitate with heavy metal ions and facilitate in remediation measures. However, MPs biodegradation generates GHGs emission per unit mass, comparably more from freshwater than marine ecosystem. Considering the toxicity, MPs-biofilm induces the oxidative response in fishes, causing painful death and thus, destroys aquatic biodiversity. This study will be useful to address MPs-biofilm associated pollution scenario via trace, test and treat strategy involving future engineering research framework for ecological restoration.

A critical review of microplastic pollution in breeding industry: Sources, distribution, impacts, and characterization techniques, mitigation strategies and future research directions

Microplastic (MP) pollution has garnered significant attention due to its detrimental effects on ecosystems and human health. If MPs contaminate farmed animals, they are more likely to enter the human body through the food chain, thereby impacting human health. Exploring MPs in breeding industry can provide a theoretical basis for breeding industry to prevent MP pollution. However, there is currently a lack of comprehensive summaries and overviews of MPs research in the industry as a whole. The core focus of the review is to improve our understanding of MPs in the breeding industry and provide valuable references and support for the development of mitigation strategies and policies. The review found that there are more studies related to MP pollution in the breeding industry, but there is inadequate information on the prevention and control technology. This review proposes strategies for prevention and control and discusses future research directions.

Adsorption behavior and mechanism of heavy metals onto microplastics: A meta-analysis assisted by machine learning

Microplastics (MPs) have the potential to adsorb heavy metals (HMs), resulting in a combined pollution threat in aquatic and terrestrial environments. However, due to the complexity of MP/HM properties and experimental conditions, research on the adsorption of HMs onto MPs often yields inconsistent findings. To address this issue, we conducted a comprehensive meta-analysis assisted with machine learning by analyzing a dataset comprising 3340 records from 134 references. The results indicated that polyamide (PA) (ES = -1.26) exhibited the highest adsorption capacity for commonly studied HMs (such as Pb, Cd, Cu, and Cr), which can be primarily attributed to the presence of C=O and N-H groups. In contrast, polyvinyl chloride (PVC) demonstrated a lower adsorption capacity, but the strongest adsorption strength resulting from the halogen atom on its surface. In terms of HMs, metal cations were more readily adsorbed by MPs compared with metalloids and metal oxyanions, with Pb (ES = -0.78) exhibiting the most significant adsorption. As the pH and temperature increased, the adsorption of HMs initially increased and subsequently decreased. Using a random forest model, we accurately predicted the adsorption capacity of MPs based on MP/HM properties and experimental conditions. The main factors affecting HM adsorption onto MPs were HM and MP concentrations, specific surface area of MP, and pH. Additionally, surface complexation and electrostatic interaction were the predominant mechanisms in the adsorption of Pb and Cd, with surface functional groups being the primary factors affecting the mechanism of MPs. These findings provide a quantitative summary of the interactions between MPs and HMs, contributing to our understanding of the environmental behavior and ecological risks associated with their correlation.

Surface characteristics and adsorption properties of polypropylene microplastics by ultraviolet irradiation and natural aging

The vast application and deep integration of plastic commodity with our human lives raise a great concern about the ubiquitous microplastics (MPs) in nature, yet the environmental behavior of MPs remain unclear. As a main type and candidate of MPs, pristine polypropylene MPs (PP-MP-Pris), as well as the influence of ultraviolet (UV) irradiation on the degree of aging and surface characteristics, were characterized quantitatively by Fourier infrared spectroscopy, scanning electron microscopy, contact angle meter, automatic specific surface area and pore analyzer and laser particle analyzer, with natural aged PP-MPs (PP-MP-Age) as comparison. The carbonyl index (CI) of UV aged PP-MPs (PP-MP-U) was increased with extension of exposure time, while biofilm with abundant functional groups and the maximum CI value were the characteristics of PP-MP-Age. Moreover, the adsorption capacity of PP-MP-U for crystal violet (CV) was increased and reached the maximum after 30 days, while that of PP-MP-Age was weakened, probably due to the enhanced hydrophilicity and the shedding of calcium carbonate (CaCO3) during the natural aging process, which was demonstrated by hydrochloric acid treatment, indicating the vital involvement of CaCO3. Moreover, the better fitting to PSO kinetics and Freundlich isotherm models indicated that the multilayered and non-homogeneous surface adsorption was acted as the rate-controlling step. Furthermore, the positive values of ΔGθ, ΔHθ and ΔSθ indicated that the adsorption was a non-spontaneous, endothermic process with increased degree of the freedom on the interface of PP-MPs and CV solution. The presence of divalent salts inhibited CV adsorption, demonstrating that electrostatic attraction played a major role in CV capture. The hydrophobic interaction, micropore filling, hydrogen bonding, and π - π conjugation were possible involved. This study is of great significance for better understanding the complex pollution of MPs and its potential environmental risks in the future.

Microplastic atmospheric pollution in an urban Southern Brazil region: What can spider webs tell us?

The World Health Organization categorizes air pollution as the presence of one or more contaminants in the atmosphere such as smoke, dust, and particulate matter like microplastics, which are considered a priority pollutant. However, only a few studies have been developed on atmospheric pollution, and knowledge about MPs in the atmosphere is still limited. Spider webs have been tested and used as a passive sampling approach to study anthropogenic pollution. Despite this, studies on microplastic contamination using spiderwebs as samplers are scarce. Thus, this study uses spider webs as passive indicators to investigate air quality regarding microplastic contamination in an urbanized area. Therefore, 30 sampling points were selected, and webs of Nephilingis cruentata were collected. The spider webs were dipped in KOH 10 %. After digestion, the solution was washed and sieved through a 90 µm geological sieve. The remaining material was transferred to a Petri dish with filter paper, quantified, and identified by type and color. The chemical composition of the polymers was determined using Raman spectroscopy. 3138 microplastics were identified (2973 filaments and 165 fragments). The most frequent colors were blue and black. Raman spectroscopy revealed five types of polymers: Isotactic Polypropylene, Polyethylene Terephthalate, Polyurethane, Polyamide, and Direct Polyethylene.

Combined toxicity of pristine or artificially aged tire wear particles and bisphenols to Tigriopus japonicus

Tire wear particles (TWPs) are considered an important component of microplastic pollution in the marine environment and occur together with a variety of aquatic pollutants, including frequently detected bisphenols. The adverse effects of TWPs or bisphenols on aquatic organisms have been widely reported. However, the combined toxicity of TWPs and bisphenols is still unknown. In this study, the combined toxicity of both pristine (p-) and aged TWPs (a-TWPs) and four bisphenols ((bisphenol A (BPA), bisphenol F (BPF), bisphenol S (BPS), and bisphenol AF (BPAF)) to Tigriopus japonicus was evaluated. TWPs increased the toxicity of BPA and BPF but decreased the toxicity of BPAF. For BPS, there was synergistic toxic effect in the presence of p-TWPs, but slightly antagonistic effect was observed in the presence of a-TWPs. This adsorption of BPAF by TWPs resulted in a reduction of its toxicity to the copepod. A-TWPs could release more Zn than p-TWPs, and the released Zn contributed to the synergistic effect of TWPs and BPA or BPF. The aggregation formed by TWPs in certain sizes (e.g., 90-110 μm) could cause intestinal damage and lipid peroxidation in T. japonicus. The synergistic effect of p-TWPs and BPS might be due to the aggregation size of the binary mixture. The results of the current study will be important to understand the combined toxic effect of TWPs and bisphenols and the potential toxic mechanisms of the binary mixture.

Differential effects of polystyrene microplastics on the adsorption of cadmium and ciprofloxacin by tea leaf litter-derived magnetic biochar: Influencing factors and mechanisms

Water pollution involves the coexistence of microplastics (MPs) and traditional pollutants, and how can MPs influence the adsorption of other pollutants by biochar during the treatment process remains unclear. This study aimed to investigate the influence of polystyrene microplastics (PS MPs) on the adsorption of cadmium (Cd) and ciprofloxacin (CIP) by magnetic biochar (MTBC) in the single and binary systems. MTBC was prepared using tea leaf litter; the effects of time, pH, and salt ions on the adsorption behaviors were investigated; and X-ray photoelectronic spectroscopy (XPS) and density flooding theory analysis were conducted to elucidate the influence mechanisms. Results indicated that PS MPs reduced the pollutants adsorption by MTBC due to the heterogeneous aggregation between PS MPs and MTBC and the surface charge change of MTBC induced by PS MPs. The effects of PS MPs on heavy metals and antibiotics adsorption were distinctly different. PS MPs reduced Cd adsorption on MTBC, which were significantly influenced by the solution pH and salt ions contents, suggesting the participation of electrostatic interaction and ion exchange in the adsorption, whereas the effects of PS MPs on CIP adsorption were inconspicuous. In the hybrid system, PS MPs reduced pollutants adsorption by MTBC with 66.3% decrease for Cd and 12.8% decrease for CIP, and the more remarkable reduction for Cd was due to the predominated physical adsorption, and CIP adsorption was mainly a stable chemisorption. The influence of PS MPs could be resulted from the interaction between PS MPs and MTBC with changing the functional groups and electrostatic potential of MTBC. This study demonstrated that when using biochar to decontaminate wastewater, it is imperative to consider the antagonistic action of MPs, especially for heavy metal removal. PRACTITIONER POINTS: Magnetic biochar (MTBC) was prepared successfully using tea leaf litter. MTBC could be used for cadmium (Cd) and ciprofloxacin (CIP) removal. Polystyrene microplastics (Ps MPs) reduced Cd/CIP adsorption by MTBC. Ps MPs effects on Cd adsorption were more obvious than that of CIP. Ps MPs changed the functional groups and electrostatic potential of MTBC, thus influencing MTBC adsorption.

Nanoplastics enhanced the developmental toxicity of aromatic disinfection byproducts to a marine polychaete at non-feeding early life stage

Micro/nanoplastics can act as vectors for organic pollutants and enhance their toxicity, which has been attributed to the ingestion by organisms and the "Trojan horse effect". In this study, we disclosed a non-ingestion pathway for the toxicity enhancement effect of nanoplastics. Initially, the combined toxicity of polystyrene microplastics (40 μm) or nanoplastics (50 nm) with three disinfection byproducts (DBPs) to a marine polychaete, Platynereis dumerilii, was investigated. No toxic effect was observed for the micro/nanoplastics alone. The microplastics showed no effect on the toxicity of the three DBPs, whereas the nanoplastics significantly enhanced the toxicity of two aromatic DBPs when the polychaete was in its non-feeding early life stage throughout the exposure period. The microplastics showed no interaction with the P. dumerilii embryos, whereas the nanoplastics agglomerated strongly on the embryonic chorion and fully encapsulated the embryos. This could contribute to higher actual exposure concentrations in the microenvironment around the embryos, as the concentrations of the two aromatic DBPs on the nanoplastics were 1200 and 120 times higher than those in bulk solution. Our findings highlight an important and previously overlooked mechanism by which nanoplastics and organic pollutants, such as DBPs, pose a higher risk to marine species at their vulnerable early life stages. This study may contribute to a broader understanding of the environmental impacts of plastic pollution and underscore the necessity to mitigate their risks associated with DBPs.

Quantification and characterization of microplastics ingested by mangrove oysters across West Africa

Microplastic ingestion by marine organisms presents a challenge to both ecosystem functioning and human health. We characterized microplastic abundance, shape, size, and polymer types ingested by the West African mangrove oyster, Crassostrea tulipa (Lamarck, 1819) sampled from estuaries and lagoons from the Gambia, Sierra Leone, Ghana, Benin, and Nigeria using optical microscopy and Fourier transform infrared (FTIR) techniques. A total of 780 microplastics were isolated in the whole tissues of the 250 oysters (n = 50 oysters per country). The abundance and distribution of microplastics in the oysters followed the pattern: the Gambia > Ghana > Sierra Leone > Nigeria > Benin. The Tanbi wetlands in the Gambia recorded the highest average of 10.50 ± 6.69 per oyster while the Ouidah lagoon in Benin recorded the lowest average of 1.80 ± 1.90 per oyster. Overall, microplastic numbers varied significantly (p < 0.05) among the five countries. Microfibers, particularly those within 1001-5000 μm size, dominated the total microplastic count with a few fragments and films. No spherical microplastics were isolated in the oysters. In the Sierra Leone and Benin oysters, fragments and films were absent in the samples. Microplastic between the 1001 and 5000 μm size class dominated the counts, followed by 501-1000 μm, 101-500 μm, and 51-100 μm. Five polymer groups namely polyethylene, polyester, nylon, polypropylene, and polyamide were identified across the five countries, with polyethylene occurring in oysters from all five countries and polyester occurring in all but the oysters from Nigeria. This diversity of polymers suggests varied sources of microplastics ingested by the studied oysters. The absence of microspheres across the five supports findings from other studies that they are the least ingested and highly egested by the oysters.

Bacterial community in the buckwheat rhizosphere responds more sensitively to single microplastics in lead-contaminated soil compared to the arbuscular mycorrhizal fungi community

Soil pollution by microplastics (MPs), defined as plastic particles <5 mm, and heavy metals is a significant environmental issue. However, studies on the co-contamination effects of MPs and heavy metals on buckwheat rhizosphere microorganisms, especially on the arbuscular mycorrhizal fungi (AMF) community, are limited. We introduced low (0.01 g kg-1) and high doses of lead (Pb) (2 g kg-1) along with polyethylene (PE) and polylactic acid (PLA) MPs, both individually and in combination, into soil and assessed soil properties, buckwheat growth, and rhizosphere bacterial and AMF communities in a 40-day pot experiment. Notable alterations were observed in soil properties such as pH, alkaline hydrolyzable nitrogen (AN), and the available Pb (APb). High-dose Pb combined with PLA-MPs hindered buckwheat growth. Compared to the control, bacterial Chao1 richness and Shannon diversity were lower in the high dose Pb with PLA treatment, and differentially abundant bacteria were mainly detected in the high Pb dose treatments. Variations in bacterial communities correlated with APb, pH and AN. Overall, the AMF community composition remained largely consistent across all treatments. This phenomenon may be due to fungi having lower nutritional demands than bacteria. Stochastic processes played a relatively important role in the assembly of both bacterial and AMF communities. In summary, MPs appeared to amplify both the positive and negative effects of high Pb doses on the buckwheat rhizosphere bacteria.

Triclosan-loaded aged microplastics exacerbate oxidative stress and neurotoxicity in Xenopus tropicalis tadpoles via increased bioaccumulation

Microplastics and chlorine-containing triclosan (TCS) are widespread in aquatic environments and may pose health risks to organisms. However, studies on the combined toxicity of aged microplastics and TCS are limited. To investigate the toxic effects and potential mechanisms associated with co-exposure to TCS adsorbed on aged polyethylene microplastics (aPE-MPs) at environmentally relevant concentrations, a 7-day chronic exposure experiment was conducted using Xenopus tropicalis tadpoles. The results showed that the overall particle size of aPE-MPs decreased after 30 days of UV aging, whereas the increase in specific surface area improved the adsorption capacity of aPE-MPs for TCS, resulting in the bioaccumulation of TCS under dual-exposure conditions in the order of aPE-TCS > PE-TCS > TCS. Co-exposure to aPE-MPs and TCS exacerbated oxidative stress and neurotoxicity to a greater extent than a single exposure. Significant upregulation of pro-symptomatic factors (IL-β and IL-6) and antioxidant enzyme activities (SOD and CAT) indicated that the aPE-TCS combination caused more severe oxidative stress and inflammation. Molecular docking revealed the molecular mechanism of the direct interaction between TCS and SOD, CAT, and AChE proteins, which explains why aPE-MPs promote the bioaccumulation of TCS, causing increased toxicity upon combined exposure. These results emphasize the need to be aware of the combined toxicity caused by the increased ability of aged microplastics to carry contaminants.

The effects of polystyrene microparticles on the environmental availability and bioavailability of As, Cd and Hg in soil for the land snail Cantareus aspersus

The combined contamination of terrestrial environments by metal(loid)s (MEs) and microplastics (MPs) is a major environmental issue. Once MPs enter soils, they can interact with MEs and modify their environmental availability, environmental bioavailability, and potential toxic effects on biota. Although research efforts have been made to describe the underlying mechanisms driving MP and ME interactions, the effects of MPs on ME bioavailability in terrestrial Mollusca have not yet been documented. To fill this gap, we exposed the terrestrial snail Cantareus aspersus to different combinations of polystyrene (PS) and arsenic (As), cadmium (Cd), or mercury (Hg) concentrations. Using kinetic approaches, we then assessed the variations in the environmental availability of As, Cd or Hg after three weeks of equilibration and in the environmental bioavailability of As, Cd or Hg to snails after four weeks of exposure. We showed that while environmental availability was influenced by the total ME concentration, the effects of PS were limited. Although an increase in As availability was observed for the highest exposure concentrations at the beginning of the experiment, the soil ageing processes led to rapid adsorption in the soil regardless of the PS particle concentration. Concerning transfers to snail, ME bioaccumulation was ME concentration-dependent but not modified by the PS concentration in the soils. Nevertheless, the kinetic approaches evidenced an increase in As (2- to 2.6-fold) and Cd (1.6-fold), but not Hg, environmental bioavailability or excretion (2.3- to 3.6-fold for As, 1.8-fold for Cd) at low PS concentrations. However, these impacts were no longer observable at the highest PS exposure concentrations because of the increase in the bioaccessibility of MEs in the snail digestive tract. The generalization of such hormetic responses and the identification of the precise mechanisms involved necessitate further research to deepen our understanding of the MP-mediated behaviour of MEs in co-occurring scenarios.

Reproductive toxicity and related mechanisms of micro(nano)plastics in terrestrial mammals: Review of current evidence

Micro(nano)plastics (MNPs) have been detected in various ecological environments and are widely used due to their stable properties, raising widespread concern about their potential human reproductive toxicity. Currently, infertility affects approximately 10-30% of couples of reproductive age globally. MNPs, as environmental pollutants, have been shown to exhibit reproductive toxicity through intrinsic mechanisms or as carriers of other hazardous substances. Numerous studies have established that MNPs of varying sizes and types can penetrate biological barriers, and enter tissues and even organelles of organisms through four main routes: dietary ingestion, inhalation, dermal contact, and medical interventions. However, historical research on the toxic effects of MNPs on reproduction mainly focused on lower and aquatic species. We conducted an inclusive review of studies involving terrestrial mammals, revealing that MNPs can induce reproductive toxicity via various mechanisms such as oxidative stress, inflammation, fibrosis, apoptosis, autophagy, disruption of intestinal flora, endocrine disruption, endoplasmic reticulum stress, and DNA damage. In terrestrial mammals, reproductive toxicity predominantly manifests as disruption in the blood-testis barrier (BTB), impaired spermatogenesis, sperm malformation, sperm DNA damage, reduced sperm fertilizing capacity, compromised oocyte maturation, impaired follicular growth, granulosa cell apoptosis, diminished ovarian reserve function, uterine and ovarian fibrosis, and endocrine disruption, among other effects. Furthermore, MNPs can traverse the maternal-fetal interface, potentially impacting offspring reproductive health. To gain a comprehensive understanding of the potential reproductive toxicity and underlying mechanisms of MNPs with different sizes, polymer types, shapes, and carried toxins, as well as to explore effective protective interventions for mitigating reproductive damage, further in-depth animal studies, clinical trials, and large-scale epidemiological studies are urgently required.

Metagenomic analysis reveals gene taxonomic and functional diversity response to microplastics and cadmium in an agricultural soil

Both microplastics (MPs) and heavy metals are common soil pollutants and can interact to generate combined toxicity to soil ecosystems, but their impact on soil microbial communities (e.g., archaea and viruses) remains poorly studied. Here, metagenomic analysis was used to explore the response of soil microbiome in an agricultural soil exposed to MPs [i.e., polyethylene (PE), polystyrene (PS), and polylactic acid (PLA)] and/or Cd. Results showed that MPs had more profound effects on microbial community composition, diversity, and gene abundances when compared to Cd or their combination. Metagenomic analysis indicated that the gene taxonomic diversity and functional diversity of microbial communities varied with MPs type and dose. MPs affected the relative abundance of major microbial phyla and genera, while their coexistence with Cd influenced dominant fungi and viruses. Nitrogen-transforming and pathogenic genera, which were more sensitive to MPs variations, could serve as the indicative taxa for MPs contamination. High-dose PLA treatments (10%, w/w) not only elevated nitrogen metabolism and pathogenic genes, but also enriched copiotrophic microbes from the Proteobacteria phylum. Overall, MPs and Cd showed minimal interactions on soil microbial communities. This study highlights the microbial shifts due to co-occurring MPs and Cd, providing evidence for understanding their environmental risks.

Bacterial dynamics of the plastisphere microbiome exposed to sub-lethal antibiotic pollution

BACKGROUND

Antibiotics and microplastics are two major aquatic pollutants that have been associated to antibiotic resistance selection in the environment and are considered a risk to human health. However, little is known about the interaction of these pollutants at environmental concentrations and the response of the microbial communities in the plastisphere to sub-lethal antibiotic pollution. Here, we describe the bacterial dynamics underlying this response in surface water bacteria at the community, resistome and mobilome level using a combination of methods (next-generation sequencing and qPCR), sequencing targets (16S rRNA gene, pre-clinical and clinical class 1 integron cassettes and metagenomes), technologies (short and long read sequencing), and assembly approaches (non-assembled reads, genome assembly, bacteriophage and plasmid assembly).

RESULTS

Our results show a shift in the microbial community response to antibiotics in the plastisphere microbiome compared to surface water communities and describe the bacterial subpopulations that respond differently to antibiotic and microplastic pollution. The plastisphere showed an increased tolerance to antibiotics and selected different antibiotic resistance bacteria (ARB) and antibiotic resistance genes (ARGs). Several metagenome assembled genomes (MAGs) derived from the antibiotic-exposed plastisphere contained ARGs, virulence factors, and genes involved in plasmid conjugation. These include Comamonas, Chryseobacterium, the opportunistic pathogen Stenotrophomonas maltophilia, and other MAGs belonging to genera that have been associated to human infections, such as Achromobacter. The abundance of the integron-associated ciprofloxacin resistance gene aac(6')-Ib-cr increased under ciprofloxacin exposure in both freshwater microbial communities and in the plastisphere. Regarding the antibiotic mobilome, although no significant changes in ARG load in class 1 integrons and plasmids were observed in polluted samples, we identified three ARG-containing viral contigs that were integrated into MAGs as prophages.

CONCLUSIONS

This study illustrates how the selective nature of the plastisphere influences bacterial response to antibiotics at sub-lethal selective pressure. The microbial changes identified here help define the selective role of the plastisphere and its impact on the maintenance of environmental antibiotic resistance in combination with other anthropogenic pollutants. This research highlights the need to evaluate the impact of aquatic pollutants in environmental microbial communities using complex scenarios with combined stresses. Video Abstract.

Effect of microplastics on oxytetracycline trophic transfer: Immune, gut microbiota and antibiotic resistance gene responses

Microplastics and antibiotics are prevalent and emerging pollutants in aquatic ecosystems, but their interactions in aquatic food chains remain largely unexplored. This study investigated the impact of polypropylene microplastics (PP-MPs) on oxytetracycline (OTC) trophic transfer from the shrimp (Neocaridina denticulate) to crucian carp (Carassius auratus) by metagenomic sequencing. The carrier effects of PP-MPs promoted OTC bioaccumulation and trophic transfer, which exacerbated enterocyte vacuolation and hepatocyte eosinophilic necrosis. PP-MPs enhanced the inhibitory effect of OTC on intestinal lysozyme activities and complement C3 levels in shrimp and fish, and hepatic immunoglobulin M levels in fish (p < 0.05). Co-exposure of MPs and OTC markedly increased the abundance of Actinobacteria in shrimp and Firmicutes in fish, which caused disturbances in carbohydrate, amino acid, and energy metabolism. Moreover, OTC exacerbated the enrichment of antibiotic resistance genes (ARGs) in aquatic animals, and PP-MPs significantly increased the diversity and abundance of ARGs and facilitated the trophic transfer of teta and tetm. Our findings disclosed the impacts of PP-MPs on the mechanism of antibiotic toxicity in aquatic food chains and emphasized the importance of gut microbiota for ARGs trophic transfer, which contributed to a deeper understanding of potential risks posed by complex pollutants on aquatic ecosystems.

Understanding microplastic aging driven by photosensitization of algal extracellular polymeric substances

The aging of microplastics (MPs) is extremely influenced by photochemically-produced reactive intermediates (PPRIs), which are mediated by natural photosensitive substances. Algal extracellular polymeric substances (EPS) can produce PPRIs when exposed to sunlight. Nonetheless, the specific role of EPS in the aging process of MPs remains unclear. This work systematically explored the aging process of polystyrene (PS) MPs in the EPS secreted by Chlorella vulgaris under simulated sunlight irradiation. The results revealed that the existence of EPS accelerated the degradation of PS MPs into particles with sizes less than 1 µm, while also facilitating the formation of hydroxy groups on the surface. The release rate of dissolved organic matter (DOM) from PS MPs was elevated from 0.120 mg·L-1·day-1 to 0.577 mg·L-1·day-1. The primary factor contributing to the elevated levels of DOM was humic acid-like compounds generated through the breakdown of PS. EPS accelerated the aging process of PS MPs by primarily mediating the formation of triplet excited states (3EPS*), singlet oxygen (1O2), and superoxide radicals (O2∙-), resulting in indirect degradation. 3EPS* was found to have the most substantial impact. This study makes a significant contribution to advance understanding of the environmental fate of MPs in aquatic environments impacted by algal blooms.

Combined effects of micron-sized polyvinyl chloride particles and copper on seed germination of perilla

Microplastics (MPs) and copper (Cu) pollution coexist widely in cultivation environment. In this paper, polyvinyl chloride (PVC) were used to simulate the MPs exposure environment, and the combined effects of MPs + Cu on the germination of perilla seeds were analyzed. The results showed that low concentrations of Cu promoted seed germination, while medium to high concentrations exhibited inhibition and deteriorated the morphology of germinated seeds. The germination potential, germination index and vitality index of 8 mg • L-1 Cu treatment group with were 23.08%, 76.32% and 65.65%, respectively, of the control group. The addition of low concentration PVC increased the above indicators by 1.27, 1.15, and 1.35 times, respectively, while high concentration addition led to a decrease of 65.38%, 82.5%, and 66.44%, respectively. The addition of low concentration PVC reduced the amount of PVC attached to radicle. There was no significant change in germination rate. PVC treatment alone had no significant effect on germination. MPs + Cu inhibited seed germination, which was mainly reflected in the deterioration of seed morphology. Cu significantly enhanced antioxidant enzyme activity, increased reactive oxygen species (ROS) and MDA content. The addition of low concentration PVC enhanced SOD activity, reduced MDA and H2O2 content. The SOD activity of the Cu2+8 + PVC10 group was 4.05 and 1.35 times higher than that of the control group and Cu treatment group at their peak, respectively. At this time, the CAT activity of the Cu2+8 + PVC5000 group increased by 2.66 and 1.42 times, and the H2O2 content was 2.02 times higher than the control. Most of the above indicators reached their peak at 24 h. The activity of α-amylase was inhibited by different treatments, but β-amylase activity, starch and soluble sugar content did not change regularly. The research results can provide new ideas for evaluating the impact of MPs + Cu combined pollution on perilla and its potential ecological risk.

Research progress on the origin, fate, impacts and harm of microplastics and antibiotic resistance genes in wastewater treatment plants

Previous studies reported microplastics (MPs), antibiotics, and antibiotic resistance genes (ARGs) in wastewater treatment plants (WWTPs). There is still a lack of research progress on the origin, fate, impact and hazards of MPs and ARGs in WWTPs. This paper fills a gap in this regard. In our search, we used "microplastics", "antibiotic resistance genes", and "wastewater treatment plant" as topic terms in Web of Science, checking the returned results for relevance by examining paper titles and abstracts. This study mainly explores the following points: (1) the origins and fate of MPs, antibiotics and ARGs in WWTPs; (2) the mechanisms of action of MPs, antibiotics and ARGs in sludge biochemical pools; (3) the impacts of MPs in WWTPs and the spread of ARGs; (4) and the harm inflicted by MPs and ARGs on the environment and human body. Contaminants in sewage sludge such as MPs, ARGs, and antibiotic-resistant bacteria enter the soil and water. Contaminants can travel through the food chain and thus reach humans, leading to increased illness, hospitalization, and even mortality. This study will enhance our understanding of the mechanisms of action among MPs, antibiotics, ARGs, and the harm they inflict on the human body.

Combined effects of norfloxacin and polystyrene nanoparticles on the oxidative stress and gut health of the juvenile horseshoe crab Tachypleus tridentatus

Pollution with anthropogenic contaminants including antibiotics and nanoplastics leads to gradual deterioration of the marine environment, which threatens endangered species such as the horseshoe crab Tachypleus tridentatus. We assessed the potential toxic mechanisms of an antibiotic (norfloxacin, 0, 0.5, 5 μg/L) and polystyrene nanoparticles (104 particles/L) in T. tridentatus using biomarkers of tissue redox status, molting, and gut microbiota. Exposure to single and combined pollutants led to disturbance of redox balance during short-term (7 days) exposure indicated by elevated level of a lipid peroxidation product, malondialdehyde (MDA). After prolonged (14-21 days) exposure, compensatory upregulation of antioxidants (catalase and glutathione but not superoxide dismutase) was observed, and MDA levels returned to the baseline in most experimental exposures. Transcript levels of molting-related genes (ecdysone receptor, retinoic acid X alpha receptor and calmodulin A) and a molecular chaperone (cognate heat shock protein 70) showed weak evidence of response to polystyrene nanoparticles and norfloxacin. The gut microbiota T. tridentatus was altered by exposures to norfloxacin and polystyrene nanoparticles shown by elevated relative abundance of Bacteroidetes. At the functional level, evidence of suppression by norfloxacin and polystyrene nanoparticles was found in multiple intestinal microbiome pathways related to the genetic information processing, metabolism, organismal systems, and environmental information processing. Future studies are needed to assess the physiological and health consequences of microbiome dysbiosis caused by norfloxacin and polystyrene nanoparticles and assist the environmental risk assessment of these pollutants in the wild populations of the horseshoe crabs.

Secreted salt and hydrodynamic factors combine to affect dynamic fluctuations of microplastics on mangrove leaves

Mangrove leaves have been acknowledged as crucial sink for coastal microplastics (MPs). Whereas, the temporal dynamics of MPs intercepted by mangrove leaves have remained poorly understood. Here, we detected MPs intercepted by submerged and non-submerged mangrove leaves over time and the potential driving factors. Abundance and characteristics of MPs interception by mangrove leaves exhibited dynamic fluctuations, with the coefficient of variation (CV) of submerged mangrove leaves (CV = 0.604; 1.76 n/g to 15.45 n/g) being approximately twofold higher than non-submerged mangrove leaves (CV = 0.377; 0.74 n/g to 3.28 n/g). Partial least squares path model (PLS-PM) analysis further illustrated that MPs abundance on submerged mangrove leaves were negative correlated to hydrodynamic factors (i.e., current velocity and tidal range). Intriguingly, secreted salt as a significantly driver of MPs intercepted by mangrove leaves. Results of this work highlights that MPs intercepted by mangrove leaves is characterized by dynamic fluctuations and reveals the importance of hydrodynamic factors and secreted salt. Overall, this work identifies the pivotal buffering role played by mangrove leaves in intercepting MPs, which provides basic knowledge for better understanding of microplastic pollution status and control from mangrove plants.

Are you drowned in microplastic pollution? A brief insight on the current knowledge for early career researchers developing novel remediation strategies

Microplastics (MPs) composed of different polymers with various shapes, within a vast granulometric distribution (1 μm - 5 mm) and with a wide variety of physicochemical surface and bulk characteristics spiral around the globe, with different atmospheric, oceanic, cryospheric, and terrestrial residence times, while interacting with other pollutants and biota. The challenges of microplastic pollution are related to the complex relationships between the microplastic generation mechanisms (physical, chemical, and biological), their physicochemical properties, their interactions with other pollutants and microorganisms, the changes in their properties with aging, and their small sizes that facilitate their diffusion and transportation between the air, water, land, and biota, thereby promoting their ubiquity. Early career researchers (ERCs) constitute an essential part of the scientific community committed to overcoming the challenges of microplastic pollution with their new ideas and innovative scientific perspectives for the development of remediation technologies. However, because of the enormous amount of scientific information available, it may be difficult for ERCs to determine the complexity of this environmental issue. This mini-review aims to provide a quick and updated overview of the essential insights of microplastic pollution to ERCs to help them acquire the background needed to develop highly innovative physical, chemical, and biological remediation technologies, as well as valorization proposals and environmental education and awareness campaigns. Moreover, the recommendations for the development of holistic microplastic pollution remediation strategies presented here can help ERCs propose technologies considering the environmental, social, and practical dimensions of microplastic pollution while fulfilling the current government policies to manage this plastic waste.

Effect of microfibers induced toxicity in marine sedentary polychaete Hydroides elegans: Insight from embryogenesis axis

Presence of surgical face masks in the environment are more than ever before after the COVID-19 pandemic, and it poses a newer threat to aquatic habitats around the world due to microfibers (MFs) and other contaminants that get discharged when these masks deteriorate. The mechanism behind the developmental toxicity of MFs, especially released from surgical masks, on the early life stages of aquatic organisms are not well understood. Toxicity test were developed to examine the effects of MFs released from surgical facemask upon deterioration using the early gametes and early life stages of marine sedentary polychaete Hydroides elegans. For MFs release, cut pieces of face masks were allowed to degrade in seawater for different time points (1 day, 30 days and 120 days) after which the fibers were obtained for further toxicity studies. The gametes of H. elegans were exposed to the MFs (length < 20 μm) separately for 20 min at a concentration of 50 MFs/ml before fertilization. In addition, we also analyzed the experimental samples for heavy metals and organic substances released from face masks. Our findings demonstrated that gametes exposed to MFs affected the percentage of successful development, considerably slowed down the mitotic cell division and significantly postponed the time of larval hatching and also produced an adverse effect during embryogenesis. When the sperm were exposed fertilization rate was decreased drastically, whereas when the eggs were exposed to MFs fertilization was not inhibited but a delay in early embryonic development observed. In addition the release of heavy metals and other volatile organics from the degrading face masks could also contribute to overall toxicity of these materials in environment. Our study thus shows that inappropriately discarded face masks and MFs and other pollutants released from such face masks could pose long-term hazard to coastal ecosystems.

A comprehensive review of micro- and nano-plastics in the atmosphere: Occurrence, fate, toxicity, and strategies for risk reduction

Micro- and nano-plastics (MNPs) have received considerable attention over the past 10 years due to their environmental prevalence and potential toxic effects. With the increase in global plastic production and disposal, MNP pollution has become a topic of emerging concern. In this review, we describe MNPs in the atmospheric environment, and potential toxicological effects of exposure to MNPs. Studies have reported the occurrence of MNPs in outdoor and indoor air at concentrations ranging from 0.0065 items m-3 to 1583 items m-3. Findings have identified plastic fragments, fibers, and films in sizes predominantly <1000 μm with polyamide (PA), polyester (PES), polyethylene terephthalate (PET), polypropylene (PP), rayon, polyethylene (PE), polystyrene (PS), polyvinyl chloride (PVC), polyacrylonitrile (PAN), and ethyl vinyl acetate (EVA) as the major compounds. Exposure through indoor air and dust is an important pathway for humans. Airborne MNPs pose health risks to plants, animals, and humans. Atmospheric MNPs can enter organism bodies via inhalation and subsequent deposition in the lungs, which triggers inflammation and other adverse health effects. MNPs could be eliminated through source reduction, policy/regulation, environmental awareness and education, biodegradable materials, bioremediation, and efficient air-filtration systems. To achieve a sustainable society, it is crucial to implement effective strategies for reducing the usage of single-use plastics (SUPs). Further, governments play a pivotal role in addressing the pressing issue of MNPs pollution and must establish viable solutions to tackle this significant challenge.

Microplastics released from disposable medical devices and their toxic responses in Caenorhabditis elegans

Owing to accelerated urbanization and industrialization, many plastic products have been manufactured and discharged into the environment, causing environmental and public health problems. Plastics in environmental media are further degraded by prolonged exposure to light, heat, mechanical friction, and other factors to form new pollutants called microplastics (MPs). Medical plastics have become a crucial source of plastics in environmental media. However, the release profiles of MPs from medical plastics and their potential ecological and health risks remain unclear. We used optical photothermal infrared spectroscopy to explore the release profiles of eight typical disposable medical devices under high-temperature steam disinfection (HSD). We also evaluated the toxicity of disposable medical devices-derived MPs in Caenorhabditis elegans (C. elegans). Our results showed that the changes in the surface morphology and modification of the disposable medical devices were mainly associated with the material. Polypropylene (PP) and polystyrene (PS) materials exhibited high aging phenomena (e.g., bumps, depressions, bulges and cracks), and HSD broke their oxygen-containing functional groups and carbon chains. By contrast, minor changes in the chemical and physical properties were observed in the polyvinyl chloride (PVC)-prepared disposable medical devices under the same conditions. Further physicochemical characterization indicated that the amount of MPs released from PP-prepared disposable medical devices (P4: 1.27 ± 0.34 × 106) was greater than that from PVC-prepared disposable medical devices (P7: 1.08 ± 0.14 × 105). The particle size of the released MPs was the opposite, PVC-prepared disposable medical devices (P7: 11.45 ± 1.79 μm) > PP-prepared disposable medical devices (P4: 7.18 ± 0.52 μm). Toxicity assessment revealed that disposable medical devices-released MPs significantly increased germ cell apoptosisin C. elegans. Moreover, MPs from PP-prepared disposable medical devices disrupted the intestinal barrier of worms, decreasing their lifespan. Our findings provided novel information regarding the profiles and mechanisms of MP release from disposable medical devices and revealed their potential risks to ecological environment.

A critical review of the recent trends in source tracing of microplastics in the environment

Microplastics are found across the globe because of their size and ability to transport across environments. The effects of microplastics on the micro- and macro-organisms have brought out concern over the potential risk to human health and the need to regulate their distribution at the source. Control of microplastic pollution requires region-specific management and mitigation strategies which can be developed with the information on sources and their contributions. This review provides an overview of the sources, fate, and distribution of microplastics along with techniques to source-trace microplastics. Source-tracing approaches provide both qualitative and quantitive information. Since better outcomes have been produced by the integration of techniques like backward trajectory analysis with cluster analysis, the significance of integrated and multi-dimensional approaches has been emphasized. The scope of the plastisphere, heavy metal, and biofilm microbial community in tracing the sources of microplastics are also highlighted. The present review allows the researchers and policymakers to understand the recent trends in the source-tracing of microplastics which will help them to develop techniques and comprehensive action plans to limit the microplastic discharge at sources.

The hepatotoxicity assessment of micro/nanoplastics: A preliminary study to apply the adverse outcome pathways

Plastic pollution has become a significant global problem over the years, leading to the continuous decomposition and accumulation of micro/nanoplastics (MNPLs) in the environment. As a result, human exposure to these MNPLs is inevitable. The liver, in particular, is highly susceptible to potential MNPL toxicity. In this study, we systematically reviewed the current literature on MNPLs-induced hepatotoxicity and collected data on toxic events occurring at different biological levels. Then, to better understand the cause-mechanism causality, we developed an Adverse Outcome Pathway (AOP) framework for MNPLs-induced hepatotoxicity. The AOP framework provided insights into the mechanism of MNPL-induced hepatotoxicity and highlighted potential health risks such as liver dysfunction and inflammation, metabolism disorders and liver fibrosis. Moreover, we discussed the potential application of emerging toxicological models in the hepatotoxicity study. Liver organoids and liver-on-chips, which can simulate the structure and function of the liver in vitro, offer a promising alternative platform for toxicity testing and risk assessment. We proposed combining the AOP framework with these emerging toxicological models to improve our understanding of the hepatotoxic effects of MNPLs. Overall, this study performed a preliminary exploration of novel toxicological methodologies to assess the hepatotoxicity of MNPLs, providing a deeper understanding of environmental toxicology.

Co-exposure to cadmium and microplastics promotes liver fibrosis through the hemichannels -ATP-P2X7 pathway

Microplastics (MPs) and cadmium (Cd) are important environmental pollutants, that damage the liver. However, the effect and mechanism of combined Cd and MPs exposure on liver fibrosis are still largely unknown. In this study investigated, Cd + MPs exposure increased superoxide anion production and promoted extracellular ATP release compared with exposure to Cd or MPs individually. Cd + MPs increased inflammatory cell infiltration, activated the P2X7-NLRP3 signaling pathway, and promoted inflammatory factor release. Cd + MPs aggravated Cd- or MPs-induced liver fibrosis and induced liver inflammation. In AML12/HSC-T6 cell in vitro poisoning model, exposure of AML12 cells to Cd + MPs increased the opening of connexin hemichannels and promoted extracellular ATP release. Treatment of HSC-T6 cells with the supernatant of AML12 cells exposed to Cd + MPs significantly promoted HSC-T6 cell activation. Treatment of HSC-T6 cells with different concentrations of ATP produced similar results. TAT-Gap19TFA, an inhibitor of connexin hemichannels, significantly inhibited the ATP release and activation of Cd + MPs-treated HSC-T6 cells. Finally, the expression of the ATP receptor P2X7 was silenced in HSC-T6 cells, which significantly inhibited their activation. In conclusion, exposure to Cd + MPs promoted liver fibrosis through the ATP-P2X7 pathway and synergistically affected liver inflammation and fibrosis.

Application of CRISPR/Cas9-based genome editing in ecotoxicology

Chemicals are widely used and released into the environment, and their degradation, accumulation, migration, and transformation processes in the environment can pose a threat to the ecosystem. The advancement in analytical methods with high-throughput screening of biomolecules has revolutionized the way toxicologists used to explore the effects of chemicals on organisms. CRISPR/Cas is a newly developed tool, widely used in the exploration of basic science and biologically engineered products given its high efficiency and low cost. For example, it can edit target genes efficiently, and save loss of the crop yield caused by environmental pollution as well as gain a better understanding of the toxicity mechanisms from various chemicals. This review briefly introduces the development history of CRISPR/Cas and summarizes the current application of CRISPR/Cas in ecotoxicology, including its application on improving crop yield and drug resistance towards agricultural pollution, antibiotic pollution and other threats. The benefits by applying the CRISPR/Cas9 system in conventional toxicity mechanism studies are fully demonstrated here together with its foreseeable expansions in other area of ecotoxicology. Finally, the prospects and disadvantages of CRISPR/Cas system in the field of ecotoxicology are also discussed.

Microplastic ingestion perturbs the microbiome of Aedes albopictus (Diptera: Culicidae) and Aedes aegypti

Microplastics (MPs) are common environmental pollutants; however, little is known about their effects after ingestion by insects. Here we fed Aedes (Stegomyia) aegypti (L.) and Aedes (Stegomyia) albopictus (Skuse) mosquito larvae 1 µm polystyrene MPs and examined the impacts of ingestion on adult emergence rates, gut damage, and fungal and bacterial microbiota. Results show that MPs accumulate in the larval guts, resulting in gut damage. However, little impact on adult emergence rates was observed. MPs are also found in adult guts postemergence from the pupal stage, and adults expel MPs in their frass after obtaining sugar meals. Moreover, MPs effects on insect microbiomes need to be better defined. To address this knowledge gap, we investigated the relationship between MP ingestion and the microbial communities in Ae. albopictus and Ae. aegypti. The microbiota composition was altered by the ingestion of increasing concentrations of MPs. Amplicon sequence variants (ASVs) that contributed to differences in the bacterial and fungal microbiota composition between MP treatments were from the genera Elizabethkingia and Aspergillus, respectively. Furthermore, a decrease in the alpha diversity of the fungal and bacterial microbiota was observed in treatments where larvae ingested MPs. These results highlight the potential for the bacterial and fungal constituents in the mosquito microbiome to respond differently to the ingestion of MPs. Based on our findings and the effects of MP ingestion on the mosquito host micro- and mycobiome, MP pollution could impact the vector competence of important mosquito-transmitted viruses and parasites that cause human and animal diseases.

Detection and characterization of microplastics in the human testis and semen

The health risk of microplastics (MPs) is a growing global concern. Evidence of reproductive health damage caused by the accumulation of MPs in males is still lacking. In the present study, 6 testis and 30 semen samples were collected, and MPs were detected using both pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) and laser direct infrared spectroscopy (LD-IR). The results showed that MPs were detected in both testis and semen, with an average abundance of 0.23 ± 0.45 particles/mL in semen and 11.60 ± 15.52 particles/g in testis. Microplastics in the testis were composed of polystyrene (PS) with 67.7 %, while polyethylene (PE) and polyvinyl chloride (PVC) were the predominant polymers in semen. Compared to fragments, fiber, and film detected in semen, the fragment was the main shape the in testis. The sizes of these microplastics ranged from 21.76 μm to 286.71 μm, and most (67 % and 80.6 %) were 20-100 μm in semen and testis. In summary, this study revealed for the first time that MPs pollute the human male reproductive system and that various MP characteristics appear in different regions, which provides critical information and basic data for the risk assessment of MPs to human health.

Classification of household microplastics using a multi-model approach based on Raman spectroscopy

The extensive use of plastics leads to the release and diffusion of microplastics. Household plastic products occupy a large part and are closely related to daily life. Due to the small size and complex composition of microplastics, it is challenging to identify and quantify microplastics. Therefore,a multi-model machine learning approach was developed for classification of household microplastics based on Raman spectroscopy. In this study, Raman spectroscopy and machine learning algorithm are combined to realize the accurate identification of seven standard microplastic samples, real microplastics samples and real microplastic samples post-exposure to environmental stresses. Four single-model machine learning methods were used in this study, including Support vector machine (SVM), K-nearest neighbor (KNN), Linear discriminant analysis (LDA), and Multi-layer perceptron (MLP) model. The principal components analysis (PCA) was utilized before SVM, KNN and LDA. The classification effect of four models on standard plastic samples is over 88%, and reliefF algorithm was used to distinguish HDPE and LDPE samples. A multi-model is proposed based on four single models including PCA-LDA, PCA-KNN and MLP. The recognition accuracy of multi-model for standard microplastic samples, real microplastic samples and microplastic samples post-exposure to environmental stresses is over 98%. Our study demonstrates that the multi-model coupled with Raman spectroscopy is a valuable tool for microplastic classification.

Effects of irrigation on the fate of microplastics in typical agricultural soil and freshwater environments in the upper irrigation area of the Yellow River

Agricultural activities are among the most significant sources of microplastics (MPs) in water. However, few studies have explored the effect of irrigation on the fate of MPs in agricultural systems. This study investigated the distribution of MPs in agricultural soil, surface water, and sediment of adjacent rivers, as well as the "MP communities" in various environments before and after irrigation in a typical agricultural irrigation area of the Yellow River. MPs were detected in all of the examined sites. The number of MPs in surface water and sediment increased after irrigation, whereas those in the surface soil of croplands decreased. In the vertical direction, irrigation accelerated the migration of MPs (< 100 µm) deep into the soil. The vertical mobility of fibers in soil was faster than that of other types of MPs. Moreover, irrigation decreased the correlation between soil properties and MPs in soils. MP community analysis indicated that irrigation enhanced the differences between MP communities among adjacent environments. Collectively, our findings confirmed that river water irrigation caused secondary MP pollution in the soil environment and accelerated MP pollution in deep soil. Therefore, this study provides a theoretical basis for the development of strategies for MP pollution control in agricultural soil.

Recent advances in carbon-based nanomaterials for the treatment of toxic inorganic pollutants in wastewater

Wastewater contains inorganic pollutants, generated by industrial and domestic sources, such as heavy metals, antibiotics, and chemical pesticides, and these pollutants cause many environmental problems.