Stability and stabilization of omega-3 oils: A review

Stability of probiotic microcapsules produced through complex coacervation based on whey protein-gum arabic coupled with double emulsification: Role of krill oil in middle oil phase

The objective of this study was to prepare a microcapsule system composed of the inner microenvironment (probiotics), middle oil layer (soybean oil and polyglycerol polyricinoleate) and outer coacervate (whey protein and gum arabic) using double emulsification technique coupled with complex coacervation to encapsulate probiotics, and to evaluate the effect of adding krill oil (KO) to the middle oil layer on microcapsule structure and probiotic stability. The results of Fourier transform infrared spectroscopy and Scanning electron microscopy confirmed that whey protein may capture phospholipids in KO through hydrogen bonds, resulting in the formation of a more compact coacervate. Due to the compact coacervate enhanced the vapor transport barrier and reduced water evaporation during low-temperature dehydration, probiotics encapsulated in KO-supplemented microcapsules revealed less cell damage and a higher survival rate after freeze-drying. More importantly, compared with KO-free microcapsules, KO-supplemented microcapsules provided better protection for probiotics under environmental stress (pasteurization, storage and simulated gastrointestinal tract), and the protection degree exhibited a "dose-effect" relationship with the KO content (0-15 %). Overall, this work provides a novel strategy for the design of microcapsules with high bacterial viability.

Pilot-Scale Enzymatic Conversion of Low Stability, High Free Fatty, Squid Oil to an Oxidatively Stable Astaxanthin-Rich Acylglyceride Oil Suitable for Nutritional Applications

Squid viscera, a byproduct of squid processing, contains oil rich in omega-3 fatty acids (up to 10% by mass) and the antioxidant astaxanthin. However, its high free fatty acid (FFA) content compromises stability. To address this, pilot-scale (200 L) enzymatic re-esterification of squid oil using immobilized lipase (Lipozyme RMIM) was demonstrated, resulting in high acylglyceride yields. The processed oil was analyzed for oxidation kinetics and thermodynamics using Rancimat, fatty acid composition using GC, omega-3 fatty acid positional distribution in the acylglyceride product using 13C NMR, and astaxanthin content. Lipase treatment reduced FFA levels from 44% to 4% and increased acylglycerides to 93% in squid oil. This reduction in FFA was accompanied by significantly increased stability (0.06 to 18.9 h by Rancimat). The treated oil showed no loss in astaxanthin (194.1 µg/g) or omega-3 fatty acids, including docosahexaenoic acid (DHA). DHA remaining predominantly at sn-2 indicated that the naturally occurring positional distribution of this omega-3 FFA was retained in the product. Lipase treatment significantly enhanced oxidative stability, evidenced by improved thermodynamic parameters (Ea 94.15 kJ/mol, ΔH 91.09 kJ/mol, ΔS -12.6 J/mol K) and extended shelf life (IP25 74.42 days) compared to starting squid oil and commercial fish/squid oils lacking astaxanthin. Thus, lipase treatment offers an effective strategy for reducing FFA levels and producing oxidatively stable, astaxanthin-rich acylglyceride squid oil with DHA retained at the nutritionally favored sn-2 position.

Lipophilic antioxidants in edible oils: Mechanisms, applications and interactions

Essential fatty acids (EFAs) in edible oils are crucial for human nutrition. However, their high unsaturation renders edible oils susceptible to oxidation during storage and processing. The addition of lipophilic antioxidants is an effective strategy to inhibit oxidation and safeguard the nutritional integrity of edible oils. This review focused on the diverse mechanisms and applications of lipophilic antioxidants to inhibit oxidation of edible oils. A range of both synthetic and natural lipophilic antioxidants, including butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT), tert-butyl hydroquinone (TBHQ), propyl gallate (PG), tocopherols, tocopherols, carotenoids, flavonoids, ascorbyl palmitate, and lipophilic phenolic compounds were discussed. Moreover, lipophilic antioxidant extracts, as the mixture of natural lipophilic antioxidants, can significantly inhibit oil oxidation. The interaction mechanisms of natural lipophilic antioxidants were reviewed. However, compared to synthetic lipophilic antioxidants, the mechanisms and interactions of natural lipophilic antioxidants need to be further studied. Additionally, their stability and solubility, the extraction and purification costs, and the impact on the sensory must be considered when applying natural lipophilic antioxidants to edible oils. This review serves as a timely reference for application of natural lipophilic antioxidants in edible oils, contributing to the development of healthier and more sustainable options.

Synthesis of lipophilic vitamin C and evaluation of its antioxidant performance in sunflower seed oil frying

The present study involved the synthesis and analysis of a lipophilic form of vitamin C, namely tetrabutyryl vitamin C ester (TVCE). TVCE is synthesized by a simple one-step method, combining the advantages of VC and butyric acid. Its antioxidant efficacy on sunflower seed oil frying was evaluated by assessing lipid oxidation parameters including peroxide number (POV), carbonyl number (CV), and paraniline number (pAV). Furthermore, changes in the fatty acid composition of the oil were monitored using techniques such as infrared spectroscopy (IR), nuclear magnetic resonance (NMR), and gas chromatography (GC). The findings demonstrated that lipophilic vitamin C exhibited superior protection against oxidation during frying compared to vitamin E, suggesting that it may be an effective fat-soluble antioxidant. The study provides a new field for the utilization of vitamin C and a new idea for the development of efficient antioxidants.

Fabrication of bio-inspired carbon nanodot-corn starch nanocomposite films via extrusion process for sustainable active food packaging applications

In this study, carbon nanodot (CD)-corn starch (CS) nanocomposite films are fabricated for active food packaging applications. First, ginkgo biloba leaves (GBL) were used as a biomass-derived carbon precursor, and a facile hydrothermal method was employed to synthesise environmentally sustainable CDs. The GBL-derived carbon nanodots (gCDs) were then characterised and incorporated into a CS matrix via an extrusion process to fabricate the CS/gCD nanocomposite film. The effects of various gCD concentrations on the physicochemical and functional properties of CS/gCD composite films were systematically investigated. The gCD exhibited non-cytotoxic effect against human colorectal adenocarcinoma cell line (Caco-2) cells when exposed up to 1000 μg/mL. The incorporation of gCDs into the CS film improved its mechanical properties, with the toughness of the CS/gCD2% nanocomposite film exhibiting 198 % superiority compared to the CS film. In addition, the oxygen barrier and UV-blocking properties were significantly improved. Furthermore, the CS/gCD nanocomposite film significantly extended the shelf life of ω-3 oils owing to the superior antioxidant activity of the gCDs, exhibiting only 9 meq/kg during the 15-day storage period. Our results suggest that the developed CS/gCD active composite film is a promising candidate for environmentally sustainable solutions to enhance food shelf life and reduce food waste.

Omega-3 fatty acids supplementation prevents learning and memory impairment induced by chronic ethanol consumption in adolescent male rats through restoration of inflammatory and oxidative responses

OBJECTIVE

Ethanol (Eth) intake is known to cause numerous detrimental effects on the structure and function of the brain, and it is commonly used as a psychostimulant drug by adolescents. Conversely, omega-3 (O3) can reduce the risk of cognitive decline and promote the maintenance of neurophysiological functions. In this study, we investigated the protective effects of O3 on behavioral alterations, oxidative stress, and interleukin-6 (IL-6) levels induced by chronic Eth intake during adolescence in rats.

MATERIALS AND METHODS

Adolescent male rats (21 days old) were divided as follows: (1) Vehicle, (2) Eth (Eth in drinking water [20%]), (3-5) Eth + O3 (50/100/150 mg/kg), and (6) O3 (150 mg/kg). After 5 weeks, Morris water maze (MWM) and passive avoidance (PA) tests were performed, and the hippocampal and cortical levels of oxidative stress markers and inflammatory indices were measured.

RESULTS

Adolescent Eth intake impairs learning and memory function in MWM and PA tests (groups × day, p < 0.05 and p < 0.001, respectively). It was shown that Eth induced oxidative stress and neuroinflammation. O3 improved learning and impairment induced by Eth by reducing the adverse effects of Eth on the oxidant/antioxidant balance in the hippocampi (for malondialdehyde [MDA]/thiol: p < 0.01, p < 0.001, respectively) and for superoxide dismutase (SOD)/catalase (CAT): p < 0.01 and p < 0.05, respectively). Furthermore, we found that O3 prevented the Eth-induced increase of hippocampal IL-6 (p < 0.001).

CONCLUSION

O3 supplementation acts as an effective approach to prevent learning and memory impairments induced by chronic Eth consumption during adolescence. In this respect, the antioxidant and anti-inflammatory properties of O3 seem to be the main underlying mechanisms of neuroprotection.

Desserts Enriched with a Nanoemulsion Loaded with Vitamin D3 and Omega-3 Fatty Acids for Older People

The food industry is challenged to develop nutritious and palatable foods that satisfy older people's needs. So, this work aimed to study the incorporation of nanoemulsions enriched with vitamin D3 and omega-3 fatty acids into two desserts (yogurt and fruit puree), characterizing their nutritional profile, viscosity, and color properties and evaluating their in vitro bioaccessibility and sensory response. The results showed that adding nanoemulsion modified the nutrition profile of desserts due to increasing lipids and calories. The desserts' physical properties were also affected, with a decrease in viscosity and a lightening of color. Regarding digestion, the enriched desserts presented a low release of free fatty acids (14.8 and 11.4%, respectively). However, fruit puree showed the highest vitamin D3 and omega-3 fatty acid in vitro bioaccessibility (48.9 and 70.9%, respectively). In addition, older consumers found this dessert more acceptable than yogurt due to the adequate intensity of its sensory attributes (aroma, flavor, sweetness, and consistency). Therefore, the fruit puree can be enriched with nanoemulsions loaded with vitamin D3 and omega-3 fatty acids to improve the bioaccessibility of lipid bioactive compounds and sensory performance, offering a health-enhancing option for older consumers.

Co-encapsulation of omega-3 and vitamin D3 in beeswax solid lipid nanoparticles to evaluate physicochemical and in vitro release properties

In recent years, lipophilic bioactive compounds have gained much attention due to their wide range of health-benefiting effects. However, their low solubility and susceptibility to harsh conditions such as high temperatures and oxidation stress have limited their potential application for the development of functional foods and nutraceutical products in the food industry. Nanoencapsulation can help to improve the stability of hydrophobic bioactive compounds and protect these sensitive compounds during food processing conditions, thus overcoming the limitation of their pure use in food products. The objective of this work was to co-entrap vitamin D3 (VD3) and omega 3 (ω3) as hydrophobic bioactive compounds providing significant health benefits in beeswax solid lipid nanoparticles (BW. SLNs) for the first time and to investigate the effect of different concentrations of VD3 (5 and 10 mg/mL) and ω3 (8 and 10 mg) on encapsulation efficiency (EE). Our findings revealed that the highest EE was obtained for VD3 and ω3 at concentrations of 5 mg/mL and 10 mg, respectively. VD3/ω3 loaded BW. SLNs (VD3/ω3-BW. SLNs) were prepared with zeta potential and size of-32 mV and 63.5 nm, respectively. Results obtained by in-vitro release study indicated that VD3 release was lower compared to ω3 in the buffer solution. VD3 and ω3 incorporated in BW. SLNs demonstrated excellent stability under alkaline and acidic conditions. At highly oxidizing conditions, 96.2 and 90.4% of entrapped VD3 and ω3 remained stable in nanoparticles. Moreover, nanoparticles were stable during 1 month of storage, and no aggregation was observed. In conclusion, co-loaded VD3 and ω3 in BW. SLNs have the great potential to be used as bioactive compounds in food fortification and production of functional foods.

Enrichment of a fruit-based smoothie beverage with omega-3 fatty acids from microencapsulated chia seed oil

BACKGROUND

Omega-3 fatty acids are known for their various health benefits. Chia is the richest vegetable source of omega-3 fatty acids. However, its oil is highly susceptible to oxidative deterioration and should be protected for incorporation into food matrices. This work aimed to study the incorporation of different chia oil microcapsules in a powdered beverage, analyzing the effect on the physicochemical characteristics and stability during storage.

RESULTS

Different types of microcapsules were obtained: monolayer microcapsules using sodium caseinate and lactose as wall material, and multilayer microcapsules produced through electrostatic deposition using lecithins, chitosan, and chia mucilage as the first, second, and third layers, respectively. The results demonstrated an efficient enrichment of smoothies, with omega-3 fatty acid values ranging from 24.09% to 42.73%, while the original food matrix powder lacked this component. These powder beverages exhibited low moisture content (≤ 2.91%) and low water activity (≤ 0.39). The aerated, packed density and compressibility assays indicated that adding microcapsules made the powders less dense and compressible. The color of the original powdered beverage was not modified. The dispersibility reflected an acceptable instantaneity, reaching the maximum obscuration after 30 s of stirring. The solubility of all the enriched products was higher than 70%, whereas the pH was ~6.8. The contact angle between the powder and liquid indicated an excellent ability to be reconstituted in water. The analysis of the glass transition temperature showed that the storage temperature (25 °C) was adequate. The peroxide value of all the products was low throughout the storage (≤ 1.63 meq peroxide kg-1 of oil at 90 days at 25 ± 2 °C), thus maintaining the quality of the microencapsulated chia oil.

CONCLUSIONS

The results suggest that incorporating the monolayer and multilayer chia oil microcapsules that were studied could be a viable strategy for enriching smoothies with the omega-3 fatty acids present in chia seed oil. © 2023 Society of Chemical Industry.

Designing healthier and more sustainable ultraprocessed foods

The food industry has been extremely successful in creating a broad range of delicious, affordable, convenient, and safe food and beverage products. However, many of these products are considered to be ultraprocessed foods (UPFs) that contain ingredients and are processed in a manner that may cause adverse health effects. This review article introduces the concept of UPFs and briefly discusses food products that fall into this category, including beverages, baked goods, snacks, confectionary, prepared meals, dressings, sauces, spreads, and processed meat and meat analogs. It then discusses correlations between consumption levels of UPFs and diet-related chronic diseases, such as obesity and diabetes. The different reasons for the proposed ability of UPFs to increase the risk of these chronic diseases are then critically assessed, including displacement of whole foods, high energy densities, missing phytochemicals, contamination with packaging chemicals, hyperpalatability, harmful additives, rapid ingestion and digestion, and toxic reaction products. Then, potential strategies to overcome the current problems with UPFs are presented, including reducing energy density, balancing nutritional profile, fortification, increasing satiety response, modulating mastication and digestion, reengineering food structure, and precision processing. The central argument is that it may be possible to reformulate and reengineer many UPFs to improve their healthiness and sustainability, although this still needs to be proved using rigorous scientific studies.

Role of encapsulation on the bioavailability of omega-3 fatty acids

Omega-3 fatty acids (omega-3 FAs) have been widely recognized for their therapeutic advantages, including anti-inflammatory and cardioprotective properties. They have shown promise in enhancing regulatory function, promotingdevelopment and mitigating the progression of diabetes and cancer. The scientific communities, along with industries, are actively endorsing initiatives aimed at increasing the daily intake of lipids rich in omega-3 FAs. Nevertheless, incorporating polyunsaturated FAs (PUFAs) into food products poses several challenges due to their susceptibility to oxidation when exposed to oxygen, high temperatures, and moisture. This oxidative deterioration results in undesirable flavours and a loss of nutritional value. Various methods, including physical blending, interesterification, and encapsulation, have been utilized as ways to enhance the stability of edible oils rich in PUFA against oxidation. Encapsulation has emerged as a proven strategy for enhancing the oxidative stability and functional properties of omega-3 FA-rich oils. Multiple encapsulation methods have been developed to stabilize and improve the delivery of omega-3 FAs in food products. The selection of an appropriate encapsulation method depends on the desired application of the encapsulated oil. In addition, encapsulation enhances the bioavailability of omega-3 FAs by promoting increased absorption of the encapsulated form in the intestinal epithelium. This review discusses the techniques and principles of omega-3 FA-rich oil encapsulation and its role in improving stability and bioavailability. Furthermore, it also investigates the potential health benefits of these encapsulated oils. This review explores the variations in bioavailability based on encapsulation techniques and processing, offering vital insights for nutrition and product development.

Stabilization of the Antioxidant Properties in Spray-Dried Microcapsules of Fish and Chia Oil Blends

Even with healthy foods, there is still a need to protect the functionality during processing. The stabilization and enrichment of fish oil (FO) extracted from fish fillets using solvent extraction might make this healthy oil more available. FO was stabilized by mixing it with chia seed oil (CSO) at 50:50 at room temperature. The antioxidant properties of the blends were evaluated using the total phenolic content (TPC), free radical scavenging activity (DPPH), ferric reducing antioxidant potential (FRAP), and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) activities with FO and CSO as controls. The blends of FO and CSO increased the oxidative stability, while FO was the most susceptible to degradation. The stability and bioactivity of antioxidants against environmental factors were improved by using encapsulation. Response surface methodology (RSM) was used to optimize spray-drying operating conditions for spray-dried microcapsules (SDMs). The independent variables were the inlet air temperature (IAT), which varied from 125 to 185 °C; wall material (WM) concentration, which varied from 5 to 25%; pump speed (PS), which varied from 3 to 7 mL/min; and needle speed (NS), which varied from 3 to 11 s. The results indicated that the maximum antioxidant activity of SDM was obtained at 140 °C IAT, 10% WM, 4 mL/min PS, and 5 s NS, while the minimum value was obtained at 170 °C IAT, 20% WM, 6 mL/min PS, and 9 s NS. The IAT had a significant effect on the antioxidant activities, and the stability of SDMs was increased. These SDMs can be used in the formulation of food matrices due to their therapeutic and nutritional properties.

Trash to Treasure: An Up-to-Date Understanding of the Valorization of Seafood By-Products, Targeting the Major Bioactive Compounds

Fishery production is exponentially growing, and its by-products negatively impact industries' economic and environmental status. The large amount of bioactive micro- and macromolecules in fishery by-products, including lipids, proteins, peptides, amino acids, vitamins, carotenoids, enzymes, collagen, gelatin, chitin, chitosan, and fucoidan, need to be utilized through effective strategies and proper management. Due to the bioactive and healthy compounds in fishery discards, these components can be used as functional food ingredients. Fishery discards have inorganic or organic value to add to or implement in various sectors (such as the agriculture, medical, and pharmaceutical industries). However, the best use of these postharvest raw materials for human welfare remains unelucidated in the scientific community. This review article describes the most useful techniques and methods, such as obtaining proteins and peptides, fatty acids, enzymes, minerals, and carotenoids, as well as collagen, gelatin, and polysaccharides such as chitin-chitosan and fucoidan, to ensure the best use of fishery discards. Marine-derived bioactive compounds have biological activities, such as antioxidant, anticancer, antidiabetic, anti-inflammatory, and antimicrobial activities. These high-value compounds are used in various industrial sectors, such as the food and cosmetic industries, owing to their unique functional and characteristic structures. This study aimed to determine the gap between misused fishery discards and their effects on the environment and create awareness for the complete valorization of fishery discards, targeting a sustainable world.

Ultraprocessed plant-based foods: Designing the next generation of healthy and sustainable alternatives to animal-based foods

Numerous examples of next-generation plant-based foods, such as meat, seafood, egg, and dairy analogs, are commercially available. These products are usually designed to have physicochemical properties, sensory attributes, and functional behaviors that match those of the animal-sourced products they are designed to replace. However, there has been concern about the potential negative impacts of these foods on human nutrition and health. In particular, many of these products have been criticized for being ultraprocessed foods that contain numerous ingredients and are manufactured using harsh processing operations. In this article, the concept of ultraprocessed foods is introduced and its relevance to describe the properties of next-generation plant-based foods is discussed. Most commercial plant-based meat, seafood, egg, and dairy analogs currently available do fall into this category, and so can be classified as ultraprocessed plant-based (UPB) foods. The nutrient content, digestibility, bioavailability, and gut microbiome effects of UPB foods are compared to those of animal-based foods, and the potential consequences of any differences on human health are discussed. Some commercial UPB foods would not be considered healthy based on their nutrient profiles, especially those plant-based cheeses that contain low levels of protein and high levels of fat, starch, and salt. However, it is argued that UPB foods can be designed to have good nutritional profiles and beneficial health effects. Finally, areas where further research are still needed to create a more healthy and sustainable food supply are discussed.

Characterization of a New Thermostable and Organic Solution-Tolerant Lipase from Pseudomonas fluorescens and Its Application in the Enrichment of Polyunsaturated Fatty Acids

The search for and characterization of new lipases with excellent properties has always been urgent and is of great importance to meet industrial needs. In this study, a new lipase, lipB, from Pseudomonas fluorescens SBW25, belonging to the lipase subfamily I.3, was cloned and expressed in Bacillus subtilis WB800N. Enzymatic properties studies of recombinant LipB found that it exhibited the highest activity towards p-nitrophenyl caprylate at 40 °C and pH 8.0, retaining 73% of its original activity after incubation at 70 °C for 6 h. In addition, Ca²⁺, Mg²⁺, and Ba²⁺ strongly enhanced the activity of LipB, while Cu²⁺, Zn²⁺, Mn²⁺, and CTAB showed an inhibiting effect. The LipB also displayed noticeable tolerance to organic solvents, especially acetonitrile, isopropanol, acetone, and DMSO. Moreover, LipB was applied to the enrichment of polyunsaturated fatty acids from fish oil. After hydrolyzing for 24 h, it could increase the contents of polyunsaturated fatty acids from 43.16% to 72.18%, consisting of 5.75% eicosapentaenoic acid, 19.57% docosapentaenoic acid, and 46.86% docosahexaenoic acid, respectively. The properties of LipB render it great potential in industrial applications, especially in health food production.

Integrated the embedding delivery system and targeted oxygen scavenger enhances free radical scavenging capacity

World trends in oil crop growing area, yield, and production over the last 10 years exhibited an increase of 48 %, 82 %, and 240 %, respectively. Concerning reduced shelf-life of oil-containing food products caused by oil oxidation and the demand for sensory quality of oil, the development of methods the improvement oil quality is urgently required. This critical review presented a concise overview of the recent literature related to the inhibition ways of oil oxidation. The mechanism of different antioxidants and nanoparticle delivery systems on oil oxidation was also explored. The current review provides scientific findings on control strategies: (i) design oxidation quality assessment model; (ii) packaging by antioxidant coatings and eco-friendly film nanocomposite: ameliorate physicochemical properties; (iii) molecular investigations on inhibitory effects of selected antioxidants and underlying mechanisms; (iv) explore the interrelationship between the cysteine/citric acid and lipoxygenase pathway in the progression of oxidative/fragmentation degradation of unsaturated fatty acid chains.

Quantitative analysis of fatty acids and vitamin E and total lipid profiling of dietary supplements from the German market

Certain polyunsaturated fatty acids with n-3 double bonds are essential nutrients for the human body and are part of the bilayer of cell membranes or precursors of tissue hormones. The most abundant dietary n-3 fatty acids in human nutrition are α-linolenic, eicosapentaenoic, and docosahexaenoic acid and can be taken up through dietary sources such as vegetable oils or fish or, alternatively, dietary supplements with high levels of n-3 fatty acids. In previous studies, considerable variation of lipid patterns and quantities of n-3 fatty acids were observed. In this study, 33 dietary supplements from the German market, based on fish-, krill-, microalgae, and plant oil, have been analyzed. Lipid profiling (LC–MS) revealed triacylglycerols as the dominant lipid species in most samples. However, krill oil was rich in phospholipids and samples containing fatty acid concentrates featured abundant fatty acid ethyl esters and diacylglycerols. Furthermore, total lipid profiles showed considerable variance depending on the lipid sources (e.g., fish or plant oil), which was also apparent in fatty acid analysis. The contents of n-3 fatty acids ranged between 150 and 570 mg/g capsule content (GC–MS) and vitamin E (α-tocopherol and tocopheryl acetate) were found in quantities ranging from 1.2 to 86.1 mg/g capsule content (HPLC–UV/Vis). While our analyses indicated a good agreement between labeled and present quantities of total n-3 fatty acids and vitamin E for the majority of samples, significant differences in agreement between individual fatty acids were observed, as well as frequent mismatches between declared and present vitamin E derivatives.

Comparison of Physicochemical Properties of Silver and Gold Nanocomposites Based on Potato Starch in Distilled and Cold Plasma-Treated Water

Nanometal-containing biocomposites find wide use in many industries and fields of science. The physicochemical properties of these materials depend on the character of the polymer, the size and shape of the metallic nanoparticles, and the interactions between the biopolymer and the nanoparticles. The aim of the work was to synthesise and study the effect of plasma-treated water on the properties of the obtained metallic nanoparticles as well as the physicochemical and functional properties of nanocomposites based on potato starch. The metallic nanoparticles were synthesised within a starch paste made in distilled water and in distilled water exposed to low-temperature, low-pressure plasma. The materials produced were characterised in terms of their physicochemical properties. Studies have shown that gold and silver nanoparticles were successfully obtained in a matrix of potato starch in distilled water and plasma water. SEM (Scanning Electron Microscopy) images and UV-Vis spectra confirmed the presence of nanosilver and nanosilver in the obtained composites. On the basis of microscopic images, the size of nanoparticles was estimated in the range from 5 to 20 nm for nanoAg and from 15 to 40 nm for nanoAu. The analysis of FTIR-ATR spectra showed that the type of water used and the synthesis of gold and silver nanoparticles did not lead to changes in the chemical structure of potato starch. DLS analysis showed that the nanoAg obtained in the plasma water-based starch matrix were smaller than the Ag particles obtained using distilled water. Colour analysis showed that the nanocomposites without nanometals were colourless, while those containing nanoAg were yellow, while those with nanoAu were dark purple. This work shows the possibility of using plasma water in the synthesis of nanometals using potato starch, which is a very promising polysaccharide in terms of many potential applications.

Polyphenol-Enriched Protein Oleogels as Potential Delivery Systems of Omega-3 Fatty Acids

Omega-3 polyunsaturated fatty acids (n-3 FAs) are essential nutrients and are considered effective in improving human health. Recent studies highlight the importance of the combination of n-3 FAs and polyphenols for limiting the oxidation of n-3 FAs and exhibiting synergistic beneficial effects. Herein, we developed a novel formulation technology to prepare oleogels that could be used for the codelivery of n-3 FAs and polyphenols with high loading efficacy and oxidative stability. These oleogels are made from algal oil with polyphenol-enriched whey protein microgel (WPM) particles as gelling agents via simple and scalable ball milling technology. The oxidative status, fatty acid composition, and volatiles of protein oleogels during accelerated storage were systematically assessed by stoichiometry and gas chromatography-mass spectrometry. These results showed that protein oleogels could overcome several challenges associated with the formulation of n-3 oils, including long-term oxidative stability and improved sensory and textural properties. The protein oleogel system could provide an excellent convenience for formulating multiple nutrients and nutraceuticals with integrating health effects, which are expected to be used in the care of highly vulnerable populations, including children, the elderly, and patients.

Highly Valuable Fish Oil: Formation Process, Enrichment, Subsequent Utilization, and Storage of Eicosapentaenoic Acid Ethyl Esters

In recent years, as the demand for precision nutrition is continuously increasing, scientific studies have shown that high-purity eicosapentaenoic acid ethyl ester (EPA-EE) functions more efficiently than mixed omega-3 polyunsaturated fatty acid preparations in diseases such as hyperlipidemia, heart disease, major depression, and heart disease; therefore, the market demand for EPA-EE is growing by the day. In this paper, we attempt to review EPA-EE from a whole-manufacturing-chain perspective. First, the extraction, refining, and ethanolysis processes (fish oil and ethanol undergo transesterification) of EPA-EE are described, emphasizing the potential of green substitute technologies. Then, the method of EPA enrichment is thoroughly detailed, the pros and cons of different methods are compared, and current developments in monomer production techniques are addressed. Finally, a summary of current advanced strategies for dealing with the low oxidative stability and low bioavailability of EPA-EE is presented. In conclusion, understanding the entire production process of EPA-EE will enable us to govern each step from a macro perspective and accomplish the best use of EPA-EE in a more cost-effective and environmentally friendly way.

Evaluation of the Efficacy and Synergistic Effect of α- and δ-Tocopherol as Natural Antioxidants in the Stabilization of Sunflower Oil and Olive Pomace Oil during Storage Conditions

Tocopherols are natural bioactive compounds with several health benefits. This study evaluated the effect of different ratios of α- and δ- tocopherol homologs to protect sunflower oil (SO) and olive pomace oil (OPO) against oxidation. A synergistic effect was recorded when the two tocopherols were combined at a ratio of 7:1 (α-T/δ-T). The oil samples were exposed to accelerated oxidation conditions using a Rancimat (90 °C and airflow of 15 L/h for 24 h) and protection from tocopherols was compared with that from butylated hydroxytoluene (BHT). Assessment of oil stability was examined using well-known parameters such as peroxide value (PV), thiobarbituric acid reactive substances (TBARS), p-anisidine value (p-AV), conjugated dienes (CD) and trienes (CT), and total oxidation (Totox) value, which were all significantly reduced when tocopherols were added at a ratio of 7:1 α-T/δ-T. Primary oxidative compounds measured according to PV were only reduced in SO samples (6.11%). Off-flavor compounds measured via TBARS assay in SO samples were reduced by above 20%, while p-AV was also reduced. CDvalue was correlated with PV in SO samples, while the 7:1 mixture was more effective than BHT for CTvalue. Total oxidation values in SO samples and OPO samples were reduced by 6.02% and 12.62%, respectively. These values in SO samples also provided a remarkable correlation (R2 > 0.95) with incubation time. Moreover, the synergistic effect was not only effective in reducing the oxidation values of oil samples, but also in lowering the degradation rate of tocopherols. Protective effects from tocopherols were mainly observed in SO samples, as OPO samples were more resistant to oxidation processes. This effect was even observed in fatty acid analysis, where the 7:1 mixture provided better results than BHT-spiked samples. Thus, it is suggested that tocopherol mixtures might be used as a natural preservative in the food industry to restrain lipid oxidation processes.

Enzymatic lipophilization of bioactive compounds with high antioxidant activity: a review

Food products contain bioactive compounds such as phenolic and polyphenolic compounds and vitamins, resulting in a myriad of biological characteristics such as antimicrobial, anticarcinogenic, and antioxidant activities. However, their application is often restricted because of their relatively low solubility and stability in emulsions and oil-based products. Therefore, chemical, enzymatic, or chemoenzymatic lipophilization of these compounds can be achieved by grafting a non-polar moiety onto their polar structures. Among different methods, enzymatic modification is considered environmentally friendly and may require only minor downstream processing and purification steps. In recent years, different systems have been suggested to design the synthetic reaction of these novel products. This review presents the new trends in this area by summarizing the essential enzymatic modifications in the last decade that led to the synthesis of bioactive compounds with attractive antioxidative properties for the food industry by emphasizing on optimization of the reaction conditions to maximize the production yields. Lastly, recent developments regarding characterization, potential applications, emerging research areas, and needs are highlighted.

Characterization and Application in Packaging Grease of Gelatin-Sodium Alginate Edible Films Cross-Linked by Pullulan

Gelatin-sodium alginate-based edible films cross-linked with pullulan were prepared using the solution casting method. FTIR spectroscopy demonstrated the existence of hydrogen bonding interactions between the components, and scanning electron microscopy observed the component of the films, revealing electrostatic interactions and thus explaining the differences in the properties of the blend films. The best mechanical properties and oxygen barrier occurred at a 1:1 percentage of pullulan to gelatin (GP11) with sodium alginate dosing for modification. Furthermore, GP11 demonstrated the best thermodynamic properties by DSC analysis, the highest UV barrier (94.13%) and the best oxidation resistance in DPPH tests. The results of storage experiments using modified edible films encapsulated in fresh fish liver oil showed that GP11 retarded grease oxidation by inhibiting the rise in peroxide and anisidine values, while inappropriate amounts of pullulan had a pro-oxidative effect on grease. The correlation between oil oxidation and material properties was investigated, and water solubility and apparent color characteristics were also assessed.

Mono- and dioleyl p-coumarate phenolipids and their antioxidant activity in a muscle food model system

Response surface methodology (RSM) was used to optimize the degree of esterification of p-coumaric acid to triolein via lipase-catalyzed acidolysis, and enzyme load, reaction time and mole ratio of substrates were selected as variables in the experimental design. The results showed that the model employed was highly sufficient for determining the effectiveness and interaction of three selected variables, enzyme load, reaction time and the mole ratio of substrates, on the dependent variable, the degree of esterification. Although the optimization point was not found in the selected range of the three variables, the steepest ascent analysis suggested that an increase of these three variables might lead to a stationary point. However, based on the limitations on increasing the range of tested variables, including possible oxidation of synthesized lipids and increased cost, the degree of esterification so yielded in the designed central composite design should be the one closest to the possible ideal optimized degree. The p-coumarates so produced exhibited varying antioxidant performance in the tested muscle food model, which could be explained by their different lipophilicity. Moreover, the potential health benefits of synthesized phenolic lipids have been discussed.

Graphical Abstract