Elemental speciation studies--new directions for trace metal analysis

Cross-Regional Elemental Comparison of Mussels Using Total Reflection X-Ray Fluorescence (TXRF)

This study evaluates the effectiveness of Total Reflection X-ray Fluorescence for multi-element analysis in mussels, focusing on sensitivity, precision, and detection limits. Additionally, it offers a cross-regional comparison of elemental composition in mussels from aquaculture farms in Italy, Spain, and Chile. TXRF, using suspensions of mussel samples, proved effective in detecting minor and trace elements, with recovery rates over 80% for Fe, Cu, Zn, As, and Sr. The research offers a chemical element comparison of Mytilus galloprovincialis and Mytilus chilensis mussels, revealing significant variation based on geographic origin. Correlation matrices demonstrated variable associations between elements, indicating that regional environmental conditions influence bioaccumulation. These findings deepen our understanding of how mussels accumulate elements in different environments. However, further research is needed to develop comprehensive elemental databases and to account for seasonal and temporal variations in mussels' elemental composition. This study may bring insight for food safety and public health monitoring.

Fabrication of a Microfluidic-Based Device Coated with Polyelectrolyte-Capped Titanium Dioxide to Couple High-Performance Liquid Chromatography with Inductively Coupled Plasma Mass Spectrometry for Mercury Speciation

Mercury (Hg) is a toxic element which impacts on biological systems and ecosystems. Because the toxicity of Hg species is highly dependent on their concentration levels and chemical forms, the sensitive identification of the chemical forms of Hg-i.e., Hg speciation-is of major significance in providing meaningful information about the sources of Hg exposure. In this study, a microfluidic-based device made of high-clarity poly(methyl methacrylate) (PMMA) was fabricated. Then, titanium dioxide nanoparticles (nano-TiO2s) were attached to the treated channel's interior with the aid of poly(diallyldimethylammonium chloride) (PDADMAC). After coupling the nano-TiO2-coated microfluidic-based photocatalyst-assisted reduction device (the nano-TiO2-coated microfluidic-based PCARD) with high-performance liquid chromatography (HPLC) and inductively coupled plasma mass spectrometry (ICP-MS), a selective and sensitive, hyphenated system for Hg speciation was established. Validation procedures demonstrated that the method could be satisfactorily applied to the determination of mercury ions (Hg2+) and methylmercury ions (CH3Hg+) in both human urine and water samples. Remarkably, the zeta potential measured clearly indicated that the PDADMAC-capped nano-TiO2s with a predominance of positive charges indeed provided a steady force for firm attachment to the negatively charged device channel. The cause of the durability of the nano-TiO2-coated microfluidic-based PCARD was clarified thus.

Applied Analytical Methods for Detecting Heavy Metals in Medicinal Plants

For thousands of years, medicinal plants (MPs) have been one of the main sources of drugs worldwide. However, recently, heavy metal pollution has seriously affected the quality and safety of MPs. Consuming MPs polluted by heavy metals such as Pb, Hg, and Cu significantly threaten the health of consumers. To manage this situation, the levels of heavy metals in MPs must be controlled. In recent years, this field has attracted significant attention, but few researchers have systematically summarized various analytical methods. Therefore, it is necessary to investigate methods that can accurately and effectively detect the amount of heavy metals in MPs. Herein, some important analytical methods used to detect heavy metals in MPs and their applications have been introduced and summarized in detail. These include atomic absorption spectrometry, atomic fluorescence spectrometry, inductively coupled plasma mass spectrometry, inductively coupled plasma atomic emission spectrometry, X-ray fluorescence spectrometry, neutron activation analysis, and anodic stripping voltammetry. The characteristics of these methods were subsequently compared and analyzed. In addition, high-performance liquid chromatography, ultraviolet spectrophotometry, and disposable electrochemical sensors have also been used for heavy metal detection in MPs. To elucidate the systematic and comprehensive information, these methods have also been briefly introduced in this review.

Elemental Testing Using Inductively Coupled Plasma Mass Spectrometry in Clinical Laboratories

OBJECTIVES

This review aims to describe the principles underlying different types of inductively coupled plasma mass spectrometry (ICP-MS), and major technical advancements that reduce spectral interferences, as well as their suitability and wide applications in clinical laboratories.

METHODS

A literature survey was performed to review the technical aspects of ICP-MS, ICP-MS/MS, high-resolution ICP-MS, and their applications in disease diagnosis and monitoring.

RESULTS

Compared to the atomic absorption spectrometry and ICP-optical emission spectrometry, ICP-MS has advantages including improved precision, sensitivity and accuracy, wide linear dynamic range, multielement measurement capability, and ability to perform isotopic analysis. Technical advancements, such as collision/reaction cells, triple quadrupole ICP-MS, and sector-field ICP-MS, have been introduced to improve resolving power and reduce interferences. Cases are discussed that highlight the clinical applications of ICP-MS including determination of toxic elements, quantification of nutritional elements, monitoring elemental deficiency in metabolic disease, and multielement analysis.

CONCLUSIONS

This review provides insight on the strategies of elemental analysis in clinical laboratories and demonstrates current and emerging clinical applications of ICP-MS.

Zinc and cadmium mapping by NanoSIMS within the root apex after short-term exposure to metal contamination

Zinc as a micronutrient and cadmium as a nonessential toxic element share similar pathways for entering plant tissues and thus may be antagonistic. In nutrient solution culture, 17-day-old radish (Raphanus sativus L) plants were exposed to short-term (24 h) equimolar metal contamination (2.2 µM of each ⁷⁰Zn and total Cd) to investigate the in situ Zn/Cd distribution in the apical root tissues using high-resolution secondary ion mass spectrometry (NanoSIMS) imaging. Inductively-coupled plasma mass spectrometry analysis of bulk root tissue confirmed large root uptake of both metal elements. After 24-h exposure the total root concentration (in µg/g DW) of ⁷⁰Zn was 180 ± 24 (mean±SE) and of total Cd 352 ± 11. NanoSIMS mapping was performed on the cross sections of the radish root apex as a crucial component in root growth and uptake of water and nutrients from soil. Elemental maps of ⁷⁰Zn and ¹¹⁴Cd isotopes revealed greater enrichment of both metals in the outer epidermal root layer than in cortical tissues and especially stele, confirming the epidermal root cells as preferential sites of metal uptake, and indicating relatively slow and less-intensive metal transport into other parts (edible hypocotyl, shoot) of metal-sensitive radish. NanoSIMS has been confirmed as a powerful tool for spatial detection and visualisation of some ultra-trace metal isotopes (e.g. ⁷⁰Zn) in the fast-growing root tips. However, precise (sub)cellular mapping of diffusible metallic ions (Cd, Zn) remains a technically-challenging task in plant specimens given an unavoidable compromise between optimising methodology for structural preservation vs. authentic in vivo ion localisation.

Zinc and Cadmium Mapping in the Apical Shoot and Hypocotyl Tissues of Radish by High-Resolution Secondary Ion Mass Spectrometry (NanoSIMS) after Short-Term Exposure to Metal Contamination

Zinc (as an essential phytonutrient) and cadmium (as a toxic but readily bioavailable nonessential metal for plants) share similar routes for crossing plant biomembranes, although with a substantially different potential for translocation into above-ground tissues. The in situ distribution of these metals in plant cells and tissues (particularly intensively-dividing and fast-growing areas) is poorly understood. In this study, 17-day-old radish (Raphanus sativus L.) plants grown in nutrient solution were subjected to short-term (24 h) equimolar contamination (2.2 µM of each ⁷⁰Zn and Cd) to investigate their accumulation and distribution in the shoot apex (leaf primordia) and edible fleshy hypocotyl tissues. After 24-h exposure, radish hypocotyl had similar concentration (in µg/g dry weight) of ⁷⁰Zn (12.1 ± 1.1) and total Cd (12.9 ± 0.8), with relatively limited translocation of both metals to shoots (concentrations lower by 2.5-fold for ⁷⁰Zn and 4.8-fold for Cd) as determined by inductively-coupled plasma mass spectrometry (ICP-MS). The in situ Zn/Cd distribution maps created by high-resolution secondary ion mass spectrometry (NanoSIMS, Cameca, Gennevilliers, France) imaging corresponded well with the ICP-MS data, confirming a similar pattern and uniform distribution of ⁷⁰Zn and Cd across the examined areas. Both applied techniques can be powerful tools for quantification (ICP-MS) and localisation and visualisation (NanoSIMS) of some ultra-trace isotopes in the intensively-dividing cells and fast-growing tissues of non-metalophytes even after short-term metal exposure. The results emphasise the importance of the quality of (agro)ecosystem resources (growing media, metal-contaminated soils/waters) in the public health risk, given that, even under low contamination and short-term exposure, some of the most toxic metallic ions (e.g., Cd) can relatively rapidly enter the human food chain.

Unbiased Measurement of Phosphate and Phosphorus Speciation in Surface Waters

Trace-level phosphate analysis and phosphorus speciation in surface water remained challenging due to adsorption and phosphate uptake by microorganisms. In this study a two-dimensional ion chromatography separation coupled to electrospray ionization high-resolution mass spectrometry (2D-IC-ESI-MS) allowed isotope dilution quantitation of phosphate with simultaneous analysis of 11 phosphate-containing metabolites and two inorganic condensed phosphates. Samples were collected from Lake St. Clair, Lake Ontario, and Georgian Bay (ON, Canada). Comparative experiments showed lower phosphate results for samples not immediately spiked and for external calibration quantitation. Field spiking with ¹⁸O-labeled phosphate combined with isotope dilution quantitation allows measurement of the phosphate levels existent at the collection time instead of the phosphate concentrations remaining in the samples at the analysis time. This is a significant advantage against the traditional colorimetric and ion chromatographic (IC) analysis methods, which are unable to compensate for the adsorption loss occurring in standards and samples, especially when phosphate is present at levels below 20 μg L^-1 as P (61 μg L^-1 as PO₄^3-). Two phosphate-containing metabolites, adenosine 5'-monophosphate (AMP) and d-glucose 6-phosphate (Glucose-P), were detected in a subset of samples collected from Lake St. Clair, with no statistically significant correlation between them and the simultaneously measured phosphate. Directly bioavailable P (phosphate), indirectly bioavailable P (phosphatase-hydrolyzed P) and nonbioavailable P (nonhydrolizable P) fractions were quantified by measuring phosphate, phosphate after phosphatase addition and total phosphorus. The proposed 2D-IC-ESI-MS method developed for a QExactive MS instrument with field spiking of the internal standard provides accurate phosphate results and eliminates quantitation errors caused by phosphate adsorption. This setup allows simultaneous collection of targeted and nontargeted analysis data and thus the detection of trace polar organic phosphorus metabolites as well.

Characterization and identification of selected metal-binding biomolecules from hepatic and gill cytosols of Vardar chub (Squalius vardarensis Karaman, 1928) using various techniques of liquid chromatography and mass spectrometry

Metals play crucial physiological roles, but they can also cause irreparable toxic effects through binding to important cellular biomolecules in aquatic organisms.

Biology and toxicology of tellurium explored by speciation analysis

Tellurium (Te) is widely used in industry because it has unique physicochemical properties. Although Te is a non-essential element in animals and plants, it is expected to be metabolized to organometallic compounds having a carbon-Te bond in living organisms exposed to inorganic Te compounds. Thus, the speciation and identification of tellurometabolites are expected to contribute to the depiction of the metabolic chart of Te. Speciation by elemental mass spectrometry and identification by molecular mass spectrometry coupled with separation techniques have significantly contributed to the discovery of tellurometabolites in animals and plants. The aim of this mini review is to present recent advances in the biology and toxicology of tellurium as revealed by speciation and identification by molecular mass spectrometry.

In vivo study of the effect of lactoferrin on iron metabolism and bioavailability from different iron chemical species for formula milk fortification

Iron fortification in infant formulas is a common practice for providing iron to newborns in order to avoid its deficiency (anemia). Depending on the physicochemical species used, its bioavailability might be insufficient to meet iron requirements. In this vein, the influence of Lactoferrin (Lf) presence on iron bioavailability in 2-week-old wistar rats fed with formula milk fortified with ⁵⁷ Fe(III)₂ -Lf or ⁵⁷ Fe(II)SO₄ (in presence of Lf) using quantitative speciation (by HPLC-ICP-MS) and Isotope Pattern Deconvolution (IPD) is studied here. Results obtained were compared among fortifiers and also with the maternal group. In RBCs, iron was mainly bound to hemoglobin in all the assayed groups in the same extent. Regarding serum samples, several iron-proteins were observed (such as transferrin and albumin). In both samples, iron content in the fractions studied was similar in all groups compared and exogenous ⁵⁷ Fe incorporation of intaked iron was always above 50%, showing no significative differences between physicochemical forms but related to the dose administered. Regarding iron stores (liver) the group fed with formula milk fortified with the higher dose of ⁵⁷ FeSO₄ in presence of Lf presented the highest values of total iron even superior than those found in the maternal group, and also the highest exogenous (⁵⁷ Fe) incorporation. In conclusion, it was proved that iron fortification is required to ensure proper iron levels in all body compartments. No significative differences were observed between different physicochemical species when iron is administered at low doses. However, higher iron doses lead to a greater incorporation in all the iron-proteins studied.

A Review on Recent Applications of High-Performance Liquid Chromatography in Metal Determination and Speciation Analysis

High-performance liquid chromatography (HPLC) has several advantages over the conventional methods due to their operational simplicity. It is a vital tool to determine metal ions having same mass but different electronic configuration, to separate complex mixtures and to resolve ions that may be indistinguishable by mass spectrometry alone. Metal ions play vital role in many biological processes and involved in setting up of many diseases. Therefore, the development of simple methods for the detection and quantification of metals in real samples might serve as diagnostic tools for various diseases. This review article focuses on the recent main feature of this technique, i.e. speciation of metal ions and their applications to series of problem of metal ion chemistry in different environmental matrixes. Speciation of metals is of increasing interest and has a great importance because of bioavailability, environmental mobility, toxicity and potential risk of metals. With the capability of partitioning the complex species of different metal ions, HPLC is an efficient technique for this task. This review summarizes recent advances in the development of HPLC to the fundamental understanding of metal ion chemistry in the environment and discusses all the issues that still need a lot of consideration. It has been classified into different sections depending on the role of HPLC in separation used and metal speciation; furthermore, the underlying sample preconcentration techniques and detection systems involved for the determination of metal ions and their applications were discussed.

A novel electrochemical sensing platform based on Pt/PPy/Eosin-Y for the determination of cadmium

In this research work, a novel sensing platform has been designed for the determination of cadmium (Cd²⁺) based on the modification of a bare platinum (Pt) electrode with pyrrole (Py) and Eosin-Y (yellowish) using electro-polymerization and electro-deposition procedures.

Multielemental speciation analysis by advanced hyphenated technique - HPLC/ICP-MS: A review

Speciation analysis has become an invaluable tool in human health risk assessment, environmental monitoring or food quality control. Another step is to develop reliable multielemental speciation methodologies, to reduce costs, waste and time needed for the analysis. Separation and detection of species of several elements in a single analytical run can be accomplished by high performance liquid chromatography hyphenated to inductively coupled plasma mass spectrometry (HPLC/ICP-MS). Our review assembles articles concerning multielemental speciation determination of: As, Se, Cr, Sb, I, Br, Pb, Hg, V, Mo, Te, Tl, Cd and W in environmental, biological, food and clinical samples analyzed with HPLC/ICP-MS. It addresses the procedures in terms of following issues: sample collection and pretreatment, selection of optimal conditions for elements species separation by HPLC and determination using ICP-MS as well as metrological approach. The presented work is the first review article concerning multielemental speciation analysis by advanced hyphenated technique HPLC/ICP-MS.

Heavy metals in marine fish meat and consumer health: a review

The numerous health benefits provided by fish consumption may be compromised by the presence of toxic metals and metalloids such as lead, cadmium, arsenic and mercury, which can have harmful effects on the human body if consumed in toxic quantities. The monitoring of metal concentrations in fish meat is therefore important to ensure compliance with food safety regulations and consequent consumer protection. The toxicity of these metals may be dependent on their chemical forms, which requires metal speciation processes for direct measurement of toxic metal species or the identification of prediction models in order to determine toxic metal forms from measured total metal concentrations. This review addresses various shortcomings in current knowledge and research on the accumulation of metal contaminants in commercially consumed marine fish globally and particularly in South Africa, affecting both the fishing industry as well as fish consumers.

The elementome of calcium-based urinary stones and its role in urolithiasis

Urolithiasis affects around 10% of the US population with an increasing rate of prevalence, recurrence and penetrance. The causes for the formation of most urinary calculi remain poorly understood, but obtaining the chemical composition of these stones might help identify key aspects of this process and new targets for treatment. The majority of urinary stones are composed of calcium that is complexed in a crystalline matrix with organic and inorganic components. Surprisingly, mitigation of urolithiasis risk by altering calcium homeostasis has not been very effective. Thus, studies to identify other therapeutic stone-specific targets, using proteomics, metabolomics and microscopy techniques, have been conducted, revealing a high level of complexity. The data suggest that numerous metals other than calcium and many nonmetals are present within calculi at measurable levels and several have distinct distribution patterns. Manipulation of the levels of some of these elemental components of calcium-based stones has resulted in clinically beneficial changes in stone chemistry and rate of stone formation. The elementome--the full spectrum of elemental content--of calcium-based urinary calculi is emerging as a new concept in stone research that continues to provide important insights for improved understanding and prevention of urinary stone disease.

Chromium and its speciation in water samples by HPLC/ICP-MS--technique establishing metrological traceability: a review since 2000

Chromium holds a special position among living organisms because depending on its species it can be either essential or toxic. Cr(VI) even at very low concentrations is harmful and carcinogenic, while Cr(III) is a necessary microelement for cellular metabolism. Therefore, a simple analysis of Cr concentration in collected samples will not be able to distinguish these differences effectively: for a proper chemical analysis we need to perform a reliable detection and quantification of Cr species. Separation and detection of chromium can be accomplished with high performance liquid chromatography hyphenated to inductively coupled plasma mass spectrometry (HPLC/ICP-MS) in a one-step. Our review assembles articles published since 2000 regarding chromium speciation in water samples with the use of HPLC/ICP-MS. It addresses the following issues: chromium chemistry, the possibilities of dealing with interferences, metrological aspects, analytical performance and speciated isotope dilution mass spectrometry (SIDMS) which is a definitive measurement method. The authors would like to advocate this hyphenated advanced technique as well as the metrological approach in speciation analysis of chromium.

Speciation of As(III) and As(V) in water and sediment using reverse-phase ion-pair high-performance liquid chromatography-neutron activation analysis (HPLC-NAA)

Total As content and the As species distribution in water and sediments from the Kwabrafo stream, a major water body draining the Obuasi gold mining community in southwestern Ghana, have been investigated. Total As content was determined by instrumental neutron activation analysis (INAA). Ion-pair reverse phase high-performance liquid chromatography-neutron activation analysis (HPLC-NAA) was used for speciation of As species. Solid phase extraction with phosphate buffer was used to extract soluble As species from lyophilized sediment. The mass balance after phosphate extraction of soluble As species in sediment varied from 89 to 96 %. Compositionally appropriate reference material International Atomic Energy Agency (IAEA)-Lake Sediment (SL)-1 was used to check the validity of INAA method for total As determination. The measured values are in good agreement with the IAEA recommended value and also within the 95 % confidence interval. The accuracy of the measurement in terms of relative deviation from the IAEA recommended value was ±0.83 %. "In-house" prepared As(III) and As(V) standards were used to validate the HPLC-INAA method used for the As species determination. Total As concentration in the water samples ranged from 1.15 to 9.20 mg/L. As(III) species in water varied from 0.13 to 0.7 mg/L, while As(V) species varied from 0.79 to 3.85 mg/L. Total As content in sediment ranged from 2,134 to 3,596 mg/kg dry mass. The levels of As(III) and As(V) species in the sediment ranges from 138 to 506 mg/kg dry mass and 156 to 385 mg/kg dry mass, respectively.

Inductively coupled plasma-MS in drug development: bioanalytical aspects and applications

The vast majority of today's modern bioanalytical methods for pharmacokinetic, pharmacodynamic and immunogenicity purposes are based on LC-MS/MS and immunoanalytical approaches. Indeed, these methodologies are suitable for a wide range of molecules from small to large. For a smaller but not insignificant group of compounds, LC-MS/MS is not suitable - or in some cases much less suitable - as a reliable bioanalytical methodology, and inductively coupled plasma (ICP)-MS is a more appropriate methodology. ICP-MS is one of these less widely used techniques in drug development. This methodology is predominantly used for elemental bioanalysis for pharmacokinetics, for imaging purposes, for mass-balance, food-effect and biomarker studies. In addition, in the last couple of years an increasing number of applications has been published, where ICP-MS and its various hyphenations (LC-ICP-MS, CE-ICP-MS) have been used for speciation/metabolism and proteomics studies. Here, the analytical potential, the quantitative bioanalytical aspects, the various modes of operation and the challenges of the application of ICP-MS in life sciences applications are given. This includes an overview of recent applications in this area in scientific literature, the various hyphenation possibilities and their application areas and the analysis of the various sample matrices applicable to these fields. It also provides a brief outlook of where the potential of this technique lies in the future of regulated bioanalysis and drug development.

Monitoring of (bio)available labile metal fraction in a drinking water treatment plant by diffusive gradients in thin films

A performance study of diffusive gradients in thin films (DGT) and inductively coupled plasma optical emission spectrometry (ICP-OES) was applied for the monitoring of the labile fraction of metals Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn, in Sant Joan Despí Drinking Water Treatment Plant located in the South of Barcelona's Metropolitan Area (Spain). The DWTP monitoring protocol was optimized by working for 1 day of deployment (24 h) with the DGT device in contact with both treated and river water matrixes. Additionally, it was demonstrated that an increase in the deployment time of 1 week did not decrease the evaluated concentrations of the studied metals. The quality parameters of the DGT device and ICP-OES determination, such as limit of quantification, accuracy expressed as relative error (%) and reproducibility expressed as relative standard deviation, were evaluated. Good results were obtained for all the metals in ultrapure water; limits of quantification ranged from 1.5 μg L( - 1) for cadmium to 28 μg L( - 1) for zinc when deployment time of 24 h was used and from 0.2 μg L( - 1) for cadmium to 4 μg L( - 1) for zinc when this time was increased by 1 week. Accuracy and precisions lower than or equal to 10% were obtained at a parametric concentration value of the metals regulated in the European Drinking Water Guidelines (98/83/EC). DGT deployment was tested in river and treated water, and good results were obtained for Cd, Ni, Co and Zn, whereas for the other metals, a continuous control of their metallic labile fractions was monitored. Therefore, DGT device allows the continuous monitoring of the labile metal species in a drinking water treatment plant.

Probing the viral metallome: searching for metalloproteins in bacteriophage λ-- the hunt begins

Although the proteome and genome of bacteriophages are well developed, there is little knowledge about metals and their interactions with the phages, even though metals have been observed in stabilizing phage particles. With expanding studies of phage display and its promising applications, metalloprotein investigations in the bacteriophage areas are necessary to understand whether or not metalloproteins are included in the viral coat proteome. Since these virus studies are still in their infancy, lambda phage was chosen due to its high metal-binding potential as suggested by the cysteine/methionine rich proteins in the viral coat. After large-scale preparation and further purification of lambda phage according to standard protocols, state-of-the-art metallomics techniques via combinations of chromatographies and mass spectrometries were utilized for screening metal-associated species in lambda phage. The lambda phage sample was first separated using non-denaturing size exclusion chromatography with selective metal detection by ICPMS for screening associated metals and generating size distribution fractions for the various metal species, some of which include metalloproteins. Various molecular size distribution patterns were exhibited for the metals detected, Mn, Fe, Co, Ni, Cu and Zn, at different molecular weight ranges. On the other hand numerous other metals were not associated with the coat proteins, as they were not detected in the different molecular weight fractions. Further identification for putative metallopeptides and metalloproteins was accomplished by collecting various metal species' fractions offline and subsequently analyzing tryptically-digested fractions via nanoLC-Chip-ESI-MS. By searching appropriate MS databases with both Spectrum Mill and MASCOT search engines, the main capsid protein, gpE, a capsid decoration protein, gpD, and main tail component protein, gpV, were found and are known for associations with the detected transition metals. These findings will likely provide valuable information for lambda phage engineered applications.

Chemical speciation of inorganic pollutants in river-estuary-sea water systems

Monitoring studies and thermodynamic modeling were used to reveal the changes of inorganic chemical species of some water pollutants (nutrients and trace metals such as Fe, Mn, Zn, Cu, Cd and Pb) inthe river-estuary-sea water system. The case studies were two rivers, Kamchiya and Ropotamo, representing part of the Bulgarian Black Sea water catchment area, and having different flow characteristics. There were no major differences in inorganic chemical species of the two river systems. NO3(-) and NO2(-) chemical species showed no changes along the river-estuary-sea water system. Concerning phosphates six different species were calculated and differences between the three parts of the systems were established. The HPO4(2-) and H2PO4(-) species were found to be dominant in river waters. The H2PO4(-) species quickly decreased at the expense of HPO4(2-) and Ca, Mg and Na phosphate complexes in estuary and seawater. Trace metals showed a great variety of chemical species. Fe(OH)2(+) species prevailed in river waters, and Fe(OH)3(0) species--in sea waters. Me2+ and MeCO3(0) (Me = Cu, Pb) and PbHCO3(+) were dominant in river waters, while Cu(CO3)2(2-) and PbCl(-) species appear also in sea waters. Cd2+ species prevailed in river and estuary waters, and CdCln(2-n) (n = 1-3) species, in seawater. Free Zn2+ species predominated in all systems but downstream their percentage decreased at the expense of Zn phosphates, carbonates,sulfates and chlorides complexes. Only free Mn2+ species were dominant along the systems.

Evaluation of methods for trace-element determination with emphasis on their usability in the clinical routine laboratory

Commonly used techniques for trace-element analysis in human biological material are flame atomic absorption spectrometry (FAAS), graphite furnace atomic absorption spectrometry (GFAAS), inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). Elements that form volatile hydrides, first of all mercury, are analysed by hydride generation techniques. In the absorption techniques the samples are vaporized into free, neutral atoms and illuminated by a light source that emits the atomic spectrum of the element under analysis. The absorbance gives a quantitative measure of the concentration of the element. ICP-AES and ICP-MS are multi-element techniques. In ICP-AES the atoms of the sample are excited by, for example, argon plasma at very high temperatures. The emitted light is directed to a detector, and the optical signals are processed to values for the concentrations of the elements. In ICP-MS a mass spectrometer separates and detects ions produced by the ICP, according to their mass-to-charge ratio. Dilution of biological fluids is commonly needed to reduce the effect of the matrix. Digestion using acids and microwave energy in closed vessels at elevated pressure is often used. Matrix and spectral interferences may cause problems. Precautions should be taken against trace-element contamination during collection, storage and processing of samples. For clinical problems requiring the analysis of only one or a few elements, the use of FAAS may be sufficient, unless the higher sensitivity of GFAAS is required. For screening of multiple elements, however, the ICP techniques are preferable.

ICP/OES application for assessing cadmium uptake (or toxicity) in glomerular cells: influence of extracellular calcium

The risks of metals for health are highlighted by their chemical stability and their persistence in the environment. Chronic exposure to low cadmium (Cd) concentrations results in renal dysfunction mainly. Cd has been regarded primarily as a renal tubular toxicant, but glomerular structures may also be affected. Since the cellular environment may influence metal toxicity, differences concerning Cd uptake and toxicity were evaluated according to calcium (Ca) medium concentrations. An optimized inductively coupled plasma emission spectrometry method (ICP/OES) was developed under defined conditions, as a selective analytical tool to determine cadmium uptake in glomerular mesangial cells. The performance characteristics of the analytical system were evaluated for both Cd and Ca by calibration (50 to 250 microg/L and 1 to 5 mg/L), linearity (r2 .9968 and .9943), limits of detection (1 microg/L and 0.1 mg/L) and quantitation (3 microg/L and 0.3 mg/L), accuracy with spiking, and repeatability (1.2 and 2.9%) with matrix matched standards. Total intracellular Cd content was significantly threefold lower in 0.175 mM Ca medium (Ca-free Eagle's minimum essential medium [EMEM] medium with 5% fetal bovine serum [FBS]) than in EMEM medium (1.8 mM Ca) with respectively 0.16 and 0.37 microg/mg proteins after 24 h of Cd (1 microM) exposure. Similar differences were obtained in cytotoxicity studies with a fourfold reduction in the mortality index (IC50). Complementary assays using Ca-spiked medium reinforced that Cd cytotoxicity and uptake were significantly dependent on the concentration of extracellular Ca. These findings suggest direct link between Cd uptake and toxicity, underlining the relevance of the analytical method.

An interdisciplinary approach to investigate the impact of cobalt in a human keratinocyte cell line

Since in nuclear power plants, risks of skin contact contamination by radiocobalt are significant, we focused on the impact of cobalt on a human cutaneous cell line, i.e. HaCaT keratinocytes. The present paper reports an interdisciplinary approach aimed at clarifying the biochemical mechanisms of metabolism and toxicity of cobalt in HaCaT cells. Firstly, a brief overview of the used instrumental techniques is reported. The following parts present description and discussion of results concerning: (i) toxicological studies concerning cobalt impact towards HaCaT cells (ii) structural and speciation fundamental studies of cobalt-bioligand systems, through X-ray absorption spectroscopy (XAS), ab initio and thermodynamic modelling (iii) preliminary results regarding intracellular cobalt speciation in HaCaT cells using size exclusion chromatography/inductively coupled plasma-atomic emission spectroscopy (SEC/ICP-AES) and direct in situ analysis by ion beam micropobe analytical techniques.

An overview of recent applications of inductively coupled plasma-mass spectrometry (ICP-MS) in determination of inorganic impurities in drugs and pharmaceuticals

The recent applications of inductively coupled plasma-mass spectrometry (ICP-MS) in determination of trace level inorganic impurities in drugs and pharmaceuticals have been reviewed. ICP-MS coupled with LC, GC and CE was used for speciation of heavy metals in pharmaceutical products. The review covers the period from 1995 to 2005 during which the technique was applied not only for determination of metallic impurities but also the assay of various trace elements in pharmaceuticals.

Selenium speciation analysis using inductively coupled plasma-mass spectrometry

Selenium exists in several oxidation states and a variety of inorganic and organic compounds, and the chemistry of selenium is complex in both the environment and living systems. Selenium is an essential element at trace levels and toxic at greater levels. Interest in speciation analysis for selenium has grown rapidly in this last decade, especially in the use of chromatographic separation coupled with inductively coupled plasma-mass spectrometry (ICP-MS). Complete characterization of selenium compounds is necessary to understand selenium's significance in metabolic processes, clinical chemistry, biology, toxicology, nutrition and the environment. This review describes some of the essential background of selenium, and more importantly, some of the currently used separation methodologies, both chromatographic and electrophoretic, with emphasis on applications of selenium speciation analysis using ICP-MS detection.

Mass spectrometry in bioinorganic analytical chemistry

A considerable momentum has recently been gained by in vitro and in vivo studies of interactions of trace elements in biomolecules due to advances in inductively coupled plasma mass spectrometry (ICP MS) used as a detector in chromatography and capillary and planar electrophoresis. The multi-isotopic (including non-metals such as S, P, or Se) detection capability, high sensitivity, tolerance to matrix, and large linearity range regardless of the chemical environment of an analyte make ICP MS a valuable complementary technique to electrospray MS and MALDI MS. This review covers different facets of the recent progress in metal speciation in biochemistry, including probing in vitro interactions between metals and biomolecules, detection, determination, and structural characterization of heteroatom-containing molecules in biological tissues, and protein monitoring and quantification via a heteroelement (S, Se, or P) signal. The application areas include environmental chemistry, plant and animal biochemistry, nutrition, and medicine.

An architectural framework that may lie at the core of the postsynaptic density

The postsynaptic density (PSD) is a complex assembly of proteins associated with the postsynaptic membrane that organizes neurotransmitter receptors, signaling pathways, and regulatory elements within a cytoskeletal matrix. Here we show that the sterile alpha motif domain of rat Shank3/ProSAP2, a master scaffolding protein located deep within the PSD, can form large sheets composed of helical fibers stacked side by side. Zn2+, which is found in high concentrations in the PSD, binds tightly to Shank3 and may regulate assembly. Sheets of the Shank protein could form a platform for the construction of the PSD complex.

Modeling and separation-detection methods to evaluate the speciation of metals for toxicity assessment

There is an increasing appreciation for the importance of speciation in the assessment of metal toxicity. In this review, two approaches to speciation are discussed, with an emphasis on their application to biological samples. One approach is the direct separation and detection of metal species of toxicological interest. Various "hyphenated" techniques, consisting of a chromatographic system coupled to inductively coupled plasma-mass spectrometry (ICP-MS), are discussed. The chromatographic strategies employed for separation emphasize liquid chromatography (LC), but the increasing use of gas chromatography (GC) and capillary electrophoresis (CE) in speciation analysis is discussed. The second approach to speciation is the use of computer models to calculate the speciation of a metal ion within a complex mixture of ligands. This approach is applicable to systems in which the metal cation exchanges ligands rapidly, so that the sample represents an equilibrium mixture of metal complexes. These computational models are based on the equilibrium constants for the metal complexes and a series of mass balance equations and give the distribution of metal complexes in the original sample. This approach is illustrated using the speciation of Al(III) in serum as an example.

Inductively coupled plasma mass spectrometry in separation techniques: Recent trends in phosphorus speciation

Inductively coupled plasma-MS (ICP-MS) and its combined use with molecular mass spectrometric techniques have become the most promising detection techniques in speciation studies. High sensitivity and element specificity of ICP-MS has the advantage of detecting trace amounts of the species of interest in complex matrices. This review is divided into two parts. In the first part, suitable use of ICP-MS either online or offline with currently used separation techniques such as HPLC, CE, and gel electrophoresis in speciation analysis is briefly discussed. In the second part, recent applications (1999-2005) of phosphorus speciation is presented to elucidate the importance of ICP-MS in separation methods and to illustrate its importance in nonmetal detection.

Arsenic and its speciation analysis using high-performance liquid chromatography and inductively coupled plasma mass spectrometry

It is known that arsenic has different toxicological properties dependent upon both its oxidation state for inorganic compounds, as well as the different toxicity levels exhibited for organic arsenic compounds. The field of arsenic speciation analysis has grown rapidly in recent years, especially with the utilization of high-performance liquid chromatography (HPLC) coupled to inductively coupled plasma mass spectrometry (ICP-MS), a highly sensitive and robust detector system. Complete characterization of arsenic compounds is necessary to understand intake, accumulation, transport, storage, detoxification and activation of this element in the natural environment and living systems. This review describes the essential background and toxicity of arsenic in the environment, and more importantly, some currently used chromatographic applications and sample handling procedures necessary to accurately detect and quantify arsenic in its various chemical forms. Applications and work using only HPLC-ICP-MS for arsenic speciation of environmental and biological samples are presented in this review.