The in vitro displacement of adsorbed model antigens from aluminium-containing adjuvants by interstitial proteins

Review: Unravelling the Role of DNA Sensing in Alum Adjuvant Activity

Public interest in vaccines is at an all-time high following the SARS-CoV-2 global pandemic. Currently, over 6 billion doses of various vaccines are administered globally each year. Most of these vaccines contain Aluminium-based adjuvants (alum), which have been known and used for almost 100 years to enhance vaccine immunogenicity. However, despite the historical use and importance of alum, we still do not have a complete understanding of how alum works to drive vaccine immunogenicity. In this article, we critically review studies investigating the mechanisms of action of alum adjuvants, highlighting some of the misconceptions and controversies within the area. Although we have emerged with a clearer understanding of how this ubiquitous adjuvant works, we have also highlighted some of the outstanding questions in the field. While these may seem mainly of academic interest, developing a more complete understanding of these mechanisms has the potential to rationally modify and improve the immune response generated by alum-adjuvanted vaccines.

Unraveling the enigma: elucidating the relationship between the physicochemical properties of aluminium-based adjuvants and their immunological mechanisms of action

Aluminium salts are by far the most commonly used adjuvants in vaccines. There are only two aluminium salts which are used in clinically-approved vaccines, Alhydrogel® and AdjuPhos®, while the novel aluminium adjuvant used in Gardasil® is a sulphated version of the latter. We have investigated the physicochemical properties of these two aluminium adjuvants and specifically in milieus approximating to both vaccine vehicles and the composition of injection sites. Additionally we have used a monocytic cell line to establish the relationship between their physicochemical properties and their internalisation and cytotoxicity. We emphasise that aluminium adjuvants used in clinically approved vaccines are chemically and biologically dissimilar with concomitantly potentially distinct roles in vaccine-related adverse events.

Optimizing the utilization of aluminum adjuvants in vaccines: you might just get what you want

Aluminum-containing adjuvants have been used for over 90 years to enhance the immune response to vaccines. Recent work has significantly advanced our understanding of the physical, chemical, and biological properties of these adjuvants, offering key insights on underlying mechanisms. Given the long-term success of aluminum adjuvants, we believe that they should continue to represent the “gold standard” against which all new adjuvants should be compared. New vaccine candidates that require adjuvants to induce a protective immune responses should first be evaluated with aluminum adjuvants before other more experimental approaches are considered, since use of established adjuvants would facilitate both clinical development and the regulatory pathway. However, the continued use of aluminum adjuvants requires an appreciation of their complexities, in combination with access to the necessary expertise to optimize vaccine formulations. In this article, we will review the properties of aluminum adjuvants and highlight those elements that are critical to optimize vaccine performance. We will discuss how other components (excipients, TLR ligands, etc.) can affect the interaction between adjuvants and antigens, and impact the potency of vaccines. This review provides a resource and guide, which will ultimately contribute to the successful development of newer, more effective and safer vaccines.

Mechanisms of Antigen Adsorption Onto an Aluminum-Hydroxide Adjuvant Evaluated by High-Throughput Screening

The adsorption mechanism of antigen on aluminum adjuvant can affect antigen elution at the injection site and hence the immune response. Our aim was to evaluate adsorption onto aluminum hydroxide (AH) by ligand exchange and electrostatic interactions of model proteins and antigens, bovine serum albumin (BSA), β-casein, ovalbumin (OVA), hepatitis B surface antigen, and tetanus toxin (TT). A high-throughput screening platform was developed to measure adsorption isotherms in the presence of electrolytes and ligand exchange by a fluorescence-spectroscopy method that detects the catalysis of 6,8-difluoro-4-methylumbelliferyl phosphate by free hydroxyl groups on AH. BSA adsorption depended on predominant electrostatic interactions. Ligand exchange contributes to the adsorption of β-casein, OVA, hepatitis B surface antigen, and TT onto AH. Based on relative surface phosphophilicity and adsorption isotherms in the presence of phosphate and fluoride, the capacities of the proteins to interact with AH by ligand exchange followed the trend: OVA < β-casein < BSA < TT. This could be explained by both the content of ligands available in the protein structure for ligand exchange and the antigen's molecular weight. The high-throughput screening platform can be used to better understand the contributions of ligand exchange and electrostatic attractions governing the interactions between an antigen adsorbed onto aluminum-containing adjuvant.

Protective Efficacy of the Trivalent Pseudomonas aeruginosa Vaccine Candidate PcrV-OprI-Hcp1 in Murine Pneumonia and Burn Models

Pseudomonas aeruginosa is a formidable pathogen that is responsible for a diverse spectrum of human infectious diseases, resulting in considerable annual mortality rates. Because of biofilm formation and its ability of rapidly acquires of resistance to many antibiotics, P. aeruginosa related infections are difficult to treat, and therefore, developing an effective vaccine is the most promising method for combating infection. In the present study, we designed a novel trivalent vaccine, PcrV_28-294-OprI_25-83-Hcp1_1-162 (POH), and evaluated its protective efficacy in murine pneumonia and burn models. POH existed as a dimer in solution, it induced better protection efficacy in P. aeruginosa lethal pneumonia and murine burn models than single components alone when formulated with Al(OH)₃ adjuvant, and it showed broad immune protection against several clinical isolates of P. aeruginosa. Immunization with POH induced strong immune responses and resulted in reduced bacterial loads, decreased pathology, inflammatory cytokine expression and inflammatory cell infiltration. Furthermore, in vitro opsonophagocytic killing assay and passive immunization studies indicated that the protective efficacy mediated by POH vaccination was largely attributed to POH-specific antibodies. Taken together, these data provided evidence that POH is a potentially promising vaccine candidate for combating P. aeruginosa infection in pneumonia and burn infections.

Preclinical Toxicology of Vaccines1

Immunity to targeted infectious diseases may be conferred or enhanced by vaccines, which are manufactured from recombinant forms as well as inactivated or attenuated organisms. These vaccines have to meet requirements for safety, quality, and efficacy. In addition to antigenic components, various adjuvants may be included in vaccines to evoke an effective immune response. To ensure the safety of new vaccines, preclinical toxicology studies are conducted prior to the initiation of, and concurrently with, clinical studies. There are five different types of preclinical toxicology study in the evaluation of vaccine safety: single and/or repeat dose, reproductive and developmental, mutagenicity, carcinogenicity, and safety pharmacology. If any adverse effects are observed in the course of these studies, they should be fully evaluated and a final safety decision made accordingly. Successful preclinical toxicology studies depend on multiple factors including using the appropriate study designs, using the right animal model, and evoking an effective immune response. Additional in vivo and in vitro assays that establish the identity, purity, safety, and potency of the vaccine play a significant role in assessing critical characteristics of vaccine safety.

Insight into the cellular fate and toxicity of aluminium adjuvants used in clinically approved human vaccinations

Aluminium adjuvants remain the most widely used and effective adjuvants in vaccination and immunotherapy. Herein, the particle size distribution (PSD) of aluminium oxyhydroxide and aluminium hydroxyphosphate adjuvants was elucidated in attempt to correlate these properties with the biological responses observed post vaccination. Heightened solubility and potentially the generation of Al³⁺ in the lysosomal environment were positively correlated with an increase in cell mortality in vitro, potentially generating a greater inflammatory response at the site of simulated injection. The cellular uptake of aluminium based adjuvants (ABAs) used in clinically approved vaccinations are compared to a commonly used experimental ABA, in an in vitro THP-1 cell model. Using lumogallion as a direct-fluorescent molecular probe for aluminium, complemented with transmission electron microscopy provides further insight into the morphology of internalised particulates, driven by the physicochemical variations of the ABAs investigated. We demonstrate that not all aluminium adjuvants are equal neither in terms of their physical properties nor their biological reactivity and potential toxicities both at the injection site and beyond. High loading of aluminium oxyhydroxide in the cytoplasm of THP-1 cells without immediate cytotoxicity might predispose this form of aluminium adjuvant to its subsequent transport throughout the body including access to the brain.

Superovulation with a single administration of FSH in aluminum hydroxide gel: a novel superovulation method for cattle

Superovulation (SOV) is a necessary technique to produce large numbers of embryos for embryo transfer. In the conventional methods, follicular stimulating hormone (FSH) is administered to donor cattle twice daily for 3 to 4 days. As this method is labor intensive and stresses cattle, improving this method has been desired. We previously developed a novel and simple SOV method, in which the intramuscular injection of a single dose of FSH in aluminum hydroxide gel (AH-gel) induced the growth of multiple follicles, ovulation and the production of multiple embryos. Here we show that AH-gel can efficiently adsorb FSH and release it effectively in the presence of BSA, a major interstitial protein. When a single intramuscular administration of the FSH and AH-gel mixture was performed to cattle, multiple follicular growth, ovulation and embryo production were induced. However, the treatments caused indurations at the administration sites in the muscle. To reduce the muscle damage, we investigated alternative administration routes and different amounts of aluminum in the gel. By administering the FSH in AH-gel subcutaneously rather than intramuscularly, the amount of aluminum in the gel could be reduced, thus reducing the size of the induration. Moreover, repeated administrations of FSH with AH-gel did not affect the superovulatory response. These results indicate that a single administration of FSH with AH-gel is an effective, novel and practical method for SOV treatment.

The mechanisms of action of vaccines containing aluminum adjuvants: an in vitro vs in vivo paradigm

Adjuvants such as the aluminum compounds (alum) have been dominantly used in many vaccines due to their immunopotentiation and safety records since 1920s. However, how these mineral agents influence the immune response to vaccination remains elusive. Many hypotheses exist as to the mode of action of these adjuvants, such as depot formation, antigen (Ag) targeting, and the induction of inflammation. These hypotheses are based on many in vitro and few in vivo studies. Understanding how cells interact with adjuvants in vivo will be crucial to fully understanding the mechanisms of action of these adjuvants. Interestingly, how alum influences the target cell at both the cellular and molecular level, and the consequent innate and adaptive responses, will be critical in the rational design of effective vaccines against many diseases. Thus, in this review, mechanisms of action of alum have been discussed based on available in vitro vs in vivo evidences to date.

Comparable quality attributes of hepatitis E vaccine antigen with and without adjuvant adsorption-dissolution treatment

Most vaccines require adjuvants for antigen stabilization and immune potentiation. Aluminum-based adjuvants are the most widely used adjuvants for human vaccines. Previous reports demonstrated the preservation of antigen conformation and other antigen characteristics after recovery from adjuvanted Hepatitis B and human papillomavirus vaccines. In this study, we used a combination of various physiochemical and immunochemical methods to analyze hepatitis E vaccine antigen quality attributes after recovery from adjuvants. All biochemical and biophysical methods showed similar characteristics of the p239 protein after recovery from adjuvanted vaccine formulation compared to the antigen in solution which never experienced adsorption/desorption process. Most importantly, we demonstrated full preservation of key antigen epitopes post-recovery from adjuvanted vaccine using a panel of murine monoclonal antibodies as exquisite probes. Antigenicity of p239 was probed with a panel of 9 mAbs using competition/blocking ELISA, surface plasmon resonance and sandwich ELISA methods. These multifaceted analyses demonstrated the preservation of antigen key epitopes and comparable protein thermal stability when adsorbed on adjuvants or of the recovered antigen post-dissolution treatment. A better understanding of the antigen conformation in adjuvanted vaccine will enhanced our knowledge of antigen-adjuvant interactions and facilitate an improved process control and development of stable vaccine formulation.

Advances in aluminum hydroxide-based adjuvant research and its mechanism

In the past few decades, hundreds of materials have been tried as adjuvant; however, only aluminum-based adjuvants continue to be used widely in the world. Aluminum hydroxide, aluminum phosphate and alum constitute the main forms of aluminum used as adjuvants. Among these, aluminum hydroxide is the most commonly used chemical as adjuvant. In spite of its wide spread use, surprisingly, the mechanism of how aluminum hydroxide-based adjuvants exert their beneficial effects is still not fully understood. Current explanations for the mode of action of aluminum hydroxide-based adjuvants include, among others, the repository effect, pro-phagocytic effect, and activation of the pro-inflammatory NLRP3 pathway. These collectively galvanize innate as well as acquired immune responses and activate the complement system. Factors that have a profound influence on responses evoked by aluminum hydroxide-based adjuvant applications include adsorption rate, strength of the adsorption, size and uniformity of aluminum hydroxide particles, dosage of adjuvant, and the nature of antigens. Although vaccines containing aluminum hydroxide-based adjuvants are beneficial, sometimes they cause adverse reactions. Further, these vaccines cannot be stored frozen. Until recently, aluminum hydroxide-based adjuvants were known to preferentially prime Th2-type immune responses. However, results of more recent studies show that depending on the vaccination route, aluminum hydroxide-based adjuvants can enhance both Th1 as well as Th2 cellular responses. Advances in systems biology have opened up new avenues for studying mechanisms of aluminum hydroxide-based adjuvants. These will assist in scaling new frontiers in aluminum hydroxide-based adjuvant research that include improvement of formulations, use of nanoparticles of aluminum hydroxide and development of composite adjuvants.

Quantitative measurement of Toll-like receptor 4 agonists adsorbed to Alhydrogel(®) by Fourier transform infrared-attenuated total reflectance spectroscopy

Aluminum salts have a long history as safe and effective vaccine adjuvants. In addition, aluminum salts have high adsorptive capacities for vaccine antigens and adjuvant molecules, for example, Toll-like receptor 4 (TLR4) agonists. However, the physicochemical properties of aluminum salts make direct quantitation of adsorbed molecules challenging. Typical methods for quantifying adsorbed molecules require advanced instrumentation, extreme sample processing, often destroy the sample, or rely on an indirect measurement. A simple, direct, and quantitative method for analysis of adsorbed adjuvant molecules is needed. This report presents a method utilizing Fourier transform infrared spectroscopy with a ZnSe-attenuated total reflectance attachment to directly measure low levels (<30 μg/mL) of TLR4 agonists adsorbed on aluminum salts with minimal sample preparation.

Properties and prospects of adjuvants in influenza vaccination - messy precipitates or blessed opportunities?

Influenza is a major challenge to healthcare systems world-wide. While prophylactic vaccination is largely efficient, long-lasting immunity has not been achieved in immunized populations, at least in part due to the challenges arising from the antigen variation between strains of influenza A virus as a consequence of genetic drift and shift. From progress in our understanding of the immune system, the mode-of-action of vaccines can be divided into the stimulation of the adaptive system through inclusion of appropriate vaccine antigens and of the innate immune system by the addition of adjuvant to the vaccine formulation. A shared property of many vaccine adjuvants is found in their nature of water-insoluble precipitates, for instance the particulate material made from aluminum salts. Previously, it was thought that embedding of vaccine antigens in these materials provided a "depot" of antigens enabling a long exposure of the immune system to the antigen. However, more recent work points to a role of particulate adjuvants in stimulating cellular parts of the innate immune system. Here, we briefly outline the infectious medicine and immune biology of influenza virus infection and procedures to provide sufficient and stably available amounts of vaccine antigen. This is followed by presentation of the many roles of adjuvants, which involve humoral factors of innate immunity, notably complement. In a perspective of the ultrastructural properties of these humoral factors, it becomes possible to rationalize why these insoluble precipitates or emulsions are such a provocation of the immune system. We propose that the biophysics of particulate material may hold opportunities that could aid the development of more efficient influenza vaccines.

Adsorption of recombinant poxvirus L1-protein to aluminum hydroxide/CpG vaccine adjuvants enhances immune responses and protection of mice from vaccinia virus challenge

The stockpiling of live vaccinia virus vaccines has enhanced biopreparedness against the intentional or accidental release of smallpox. Ongoing research on future generation smallpox vaccines is providing key insights into protective immune responses as well as important information about subunit-vaccine design strategies. For protein-based recombinant subunit vaccines, the formulation and stability of candidate antigens with different adjuvants are important factors to consider for vaccine design. In this work, a non-tagged secreted L1-protein, a target antigen on mature virus, was expressed using recombinant baculovirus technology and purified. To identify optimal formulation conditions for L1, a series of biophysical studies was performed over a range of pH and temperature conditions. The overall physical stability profile was summarized in an empirical phase diagram. Another critical question to address for development of an adjuvanted vaccine was if immunogenicity and protection could be affected by the interactions and binding of L1 to aluminum salts (Alhydrogel) with and without a second adjuvant, CpG. We thus designed a series of vaccine formulations with different binding interactions between the L1 and the two adjuvants, and then performed a series of vaccination-challenge experiments in mice including measurement of antibody responses and post-challenge weight loss and survival. We found that better humoral responses and protection were conferred with vaccine formulations when the L1-protein was adsorbed to Alhydrogel. These data demonstrate that designing vaccine formulation conditions to maximize antigen-adjuvant interactions is a key factor in smallpox subunit-vaccine immunogenicity and protection.

The structure of HBsAg particles is not modified upon their adsorption on aluminium hydroxide gel

Current Hepatitis B vaccines are based on recombinant Hepatitis B surface antigen (HBsAg) virus-like particles adsorbed on aluminium (Al) gel. These particles exhibit a lipoprotein-like structure with about 70 protein S molecules in association with various types of lipids. To determine whether the adsorption on Al gel affects HBsAg structure, we investigated the effect of adsorption and mild desorption processes on the protein and lipid parts of the particles, using various techniques. Electron microscopy showed that the size and morphology of native and desorbed HBsAg particles were comparable. Moreover, infrared and Raman spectroscopy revealed that the secondary structure of the S proteins was not affected by the adsorption/desorption process. Affinity measurements with Surface Plasmon Resonance showed no difference between native and desorbed HBsAg for HBsAg-specific RF-1 monoclonal antibody. Steady-state and time-resolved fluorescence data of the intrinsic fluorescence of the S proteins further indicated that the adsorption/desorption of HBsAg particles on Al gel did not modify the environment of the most emitting Trp residues, confirming that the conformation of the S proteins remains intact. Moreover, using environment-sensitive 3-hydroxyflavone probes, no significant changes of the lipid core and lipid membrane surface of the HBsAg particles were observed during the adsorption/desorption process. Finally, the ratio between lipids and proteins in the particles was found to be similar before and after the adsorption/desorption process. Taken together, our data show that adsorption on Al gel does not affect the structure of the HBsAg particles.

Efficient extraction of vaccines formulated in aluminum hydroxide gel by including surfactants in the extraction buffer

Efficient antigen extraction from vaccines formulated on aluminum hydroxide gels is a critical step for the evaluation of the quality of vaccines following formulation. It has been shown in our laboratory that the efficiency of antigen extraction from vaccines formulated on Alhydrogel decreased significantly with increased storage time. To increase antigen extraction efficiency, the present study determined the effect of surfactants on antigen recovery from vaccine formulations. The Plasmodium falciparum apical membrane antigen 1 (AMA1) formulated on Alhydrogel and stored at 2-8°C for 3 years was used as a model in this study. The AMA1 on Alhydrogel was extracted in the presence or absence of 30 mM sodium dodecyl sulfate (SDS) or 20mM cetylpyridinium chloride in the extraction buffer (0.60 M citrate, 0.55 M phosphate, pH 8.5) using our standard antigen extraction protocols. Extracted AMA1 antigen was analyzed by 4-20% Tris-glycine SDS-PAGE followed by silver staining or western blotting. The results showed that inclusion of SDS or cetylpyridinium chloride in extraction buffer increased the antigen recovery dramatically and can be used for efficient characterization of Alhydrogel vaccines.

The role of adjuvant in mediating antigen structure and stability

The purpose of this study was to probe the fate of a model antigen, a cysteine-free mutant of bacteriophage T4 lysozyme, to the level of fine structural detail, as a consequence of its interaction with an aluminum (Al)-containing adjuvant. Fluorescence spectroscopy and differential scanning calorimetry were used to compare the thermal stability of the protein in solution versus adsorbed onto an Al-containing adjuvant. Differences in accessible hydrophobic surface areas were investigated using an extrinsic fluorescence probe, 8-Anilino-1-naphthalenesulfonic acid (ANS). As has been observed with other model antigens, the apparent thermal stability of the protein decreased following adsorption onto the adjuvant. ANS spectra suggested that adsorption onto the adjuvant caused an increase in exposure of hydrophobic regions of the protein. Electrostatic interactions drove the adsorption, and disruption of these interactions with high ionic strength buffers facilitated the collection of two-dimensional (15) N heteronuclear single quantum coherence nuclear magnetic resonance data of protein released from the adjuvant. Although the altered stability of the adsorbed protein suggested changes to the protein's structure, the fine structure of the desorbed protein was nearly identical to the protein's structure in the adjuvant-free formulation. Thus, the adjuvant-induced changes to the protein that were responsible for the reduced thermal stability were not observed upon desorption.

Vaccines with aluminum-containing adjuvants: optimizing vaccine efficacy and thermal stability

Aluminum-containing adjuvants have been used to enhance the immune response against killed, inactivated, and subunit antigens for more than seven decades. Nevertheless, we are only beginning to gain important insight as to what may be some very fundamental parameters for optimizing their use. For example, there is evidence that the conventional approach of maximizing antigen binding (amount and/or strength) may not result in an optimal immune response. Adsorption of antigen onto the adjuvant has recently been suggested to decrease the thermal stability of some antigens; however, whether adsorption-induced alterations to the structure and/or stability of the antigen have consequences for the elicited immune response is unclear. Finally, the thermal stability of vaccines with aluminum-containing adjuvants is not robust. Optimizing the stability of these vaccines requires an understanding of the freeze sensitivity of the adjuvant, freeze and heat sensitivity of the antigen in the presence of the adjuvant, and perhaps most important, how (or whether) various approaches to formulation can be used to address these instabilities. This review attempts to summarize recent findings regarding issues that may dictate the success of vaccines with aluminum-containing adjuvants.

The kinetics of soluble and particulate antigen trafficking in the afferent lymph, and its modulation by aluminum-based adjuvant

Aluminium adjuvants are potent enhancers of immune responses. Despite being a component in most human and animal vaccines, their specific mode of action remains elusive. We have used a sheep lymphatic cannulation model to directly measure the trafficking of soluble and particulate antigen in real-time from the site of injection. Aluminium adjuvant does not alter the kinetics of antigen flow from the site of injection; however it does reduce the amount of soluble antigen entering into afferent lymph. Large numbers of neutrophils, but not DCs, were recruited into the lymph in both saline and aluminium-injected sites and were predominantly responsible for the early uptake of particulate antigen into the lymphatic. Aluminium adjuvant did not significantly increase neutrophil uptake but markedly increased the subsequent uptake of particulate antigen by DCs from 48 to 72 h after antigen injection. Thus, the adjuvanticity of aluminium does not correlate with slow antigen release or increased cell recruitment, but with retention of antigen at the site of injection, and increased uptake of particulate antigen by mature migratory DCs after 24h.

Influence of particle size and antigen binding on effectiveness of aluminum salt adjuvants in a model lysozyme vaccine

It has been suggested that agglomeration of aluminum salt adjuvant particles during freezing and drying can cause loss of immunogenicity of vaccines formulated with such adjuvants. In this study, we tested this hypothesis and examined the immune response in a murine model to various liquid, freeze-thawed, and lyophilized vaccine formulations, using lysozyme as a model antigen. The various processing techniques and excipient levels resulted in a wide range of particle size distributions (PSDs) and antigen-adjuvant binding levels. Anti-lysozyme titers were independent of the PSD for vaccines adjuvanted with either aluminum hydroxide or aluminum phosphate and also were unaffected by the level of antigen binding to the adjuvant.

Forces determining the adsorption of a monoclonal antibody onto an aluminium hydroxide adjuvant: influence of interstitial fluid components

This study evaluates the forces involved in the adsorption of abagovomab onto an aluminium hydroxide adjuvant in interstitial fluid and the influences of interstitial fluid and its components on this process. Abagovomab is a monoclonal, anti-idiotypic antibody developed as an immunovaccine for the treatment of ovarian cancer. Partial elution of abagovomab by a change in ionic strength indicates that electrostatic interactions influenced adsorption. Studies on the role of phosphate and simulated interstitial fluid on the adsorption demonstrated that ligand exchange is the main force of adsorption. A comparison of the adsorption capacity of abagovomab in the formulation with that in an environment imitating the in vivo environment using simulated interstitial fluid showed the adsorption capacity to decrease, the more the conditions resemble the in vivo environment after subcutaneous or intramuscular administration.

Relationship between physical and chemical properties of aluminum-containing adjuvants and immunopotentiation

Aluminum-containing adjuvants are an important component of many vaccines because they safely potentiate the immune response. The structure and properties of aluminum hydroxide adjuvant, aluminum phosphate adjuvant and alum-precipitated adjuvants are presented in this review. The major antigen adsorption mechanisms, electrostatic attraction and ligand exchange, are related to the adjuvant structure. The manner by which aluminum-containing adjuvants potentiate the immune response is related to the structure, properties of the adjuvant and adsorption mechanism. Immunopotentiation occurs through the following sequential steps: inflammation and recruitment of antigen-presenting cells, retention of antigen at the injection site, uptake of antigen, dendritic cell maturation, T-cell activation and T-cell differentiation.

Successful superovulation of cattle by a single administration of FSH in aluminum hydroxide gel

We investigated whether Al-gel could adsorb and release FSH effectively in vitro and in vivo, and whether a single administration of FSH in Al-gel could successfully induce superovulation (SOV) in cattle. Porcine FSH (pFSH; 30 mg) was mixed with 5 mL of Al-gel; 99.98+/-0.01% of pFSH was adsorbed by the gel and 71.6+/-1.1% of the adsorbed pFSH was subsequently released in the presence of BSA. In cattle given a single i.m. treatment of 30 mg of pFSH in 5 mL of Al-gel, the numbers of CL, total ova recovered, and transferable embryos per cow were not significantly different from conventional (twice daily for 4 d) pFSH treatment (12.3+/-1.7 versus 11.7+/-1.8, 10.0+/-2.5 versus 9.3+/-1.7, and 8.6+/-2.3 versus 8.0+/-1.8, respectively, mean+/-S.E.M.); plasma pFSH concentrations were increased for 4 d, indicating sustained release from the Al-gel. Five cows were given 30 mg pFSH in 5 mL of Al-gel i.m. on five occasions (once every 2-3 months); there was no significant difference among treatments for the number of CL (12.4+/-3.8, 13.8+/-4.8, 9.0+/-1.9, 9.8+/-3.0, 12.0+/-2.1), total ova recovered (12.0+/-3.8, 12.6+/-5.1, 6.8+/-1.9, 7.6+/-1.8, 11.4+/-2.5), and transferable embryos (11.4+/-3.9, 10.4+/-5.8, 6.6+/-2.1, 4.8+/-1.4, 10.4+/-2.6). In conclusion, a single i.m. treatment of 30 mg pFSH in 5 mL Al-gel effectively induced SOV in cattle.

Physiochemical and functional characterization of antigen proteins eluted from aluminum hydroxide adjuvant

We have characterized protein antigens after quantitative dissociation from aluminum hydroxide adjuvant. Bovine serum albumin (BSA) and a multi-antigen vaccine for Group A Streptococcus (GrAS Vaccine) were formulated on aluminum hydroxide, stored for > or =10 days then eluted with a 48-h treatment at 4 degrees C with 0.85% H(3)PO(4) plus 4M guanidine HCl (GnHCl). BSA is recovered from adjuvant at 92+/-2%. GrAS antigens are equally recovered from GrAS Vaccine (95+/-11% of total protein expected using multiple lots stored for up to 12 months). Recovery after elution is similar when determined by RP-HPLC, SEC-HPLC, UV absorbance, or Bradford methods. Eluted antigens are structurally and functionally intact as judged relative to both treated and untreated antigen controls by SDS-PAGE, RP-HPLC, SEC-HPLC, and after desalting by circular dichroism, bis-ANS binding, and antigenicity determined by ELISA. When formulated and stored for a few weeks, BSA has more dimer (31+/-5%) relative to the elution control (9% dimer) as detected by SEC-HPLC, suggesting that BSA microaggregation is promoted on aluminum. Antigens eluted from very aged GrAS Vaccine (>12 months) show marked changes by RP-HPLC. Structural changes in the antigens under elution conditions were evaluated using bis-ANS, a fluorescent probe of protein structure. Binding of bis-ANS increases fluorescence approximately 100-fold and is significantly diminished with increasing GnHCl concentrations indicating a progressive denaturing of the proteins. At 4M GnHCl (with or without 0.85% H(3)PO(4)) the GrAS antigens are fully denatured and BSA is partially denatured. Interestingly, the addition of 0.85% H(3)PO(4) increases bis-ANS binding on GrAS antigens and reduces the denaturing of GrAS antigens and BSA by chaotropes. Desalting or diluting the eluted antigens results in renaturing of the proteins as judged by bis-ANS fluorescence, circular dichroism and antigenicity testing. The elution method provides a novel approach for high recovery and characterization of GrAS Vaccine antigens and may be applicable to the study of many aluminum hydroxide-bound vaccines.

Potentiation of the immune response to non-adsorbed antigens by aluminum-containing adjuvants

The degree of antigen adsorption by aluminum-containing adjuvants is considered an important characteristic of vaccines that is related to immunopotentiation by the adjuvant. This study examined immunopotentiation by aluminum phosphate adjuvant in three model vaccines in which the antigen was not adsorbed in the vaccine formulation nor when mixed in vitro with interstitial fluid. In the first model vaccine, aluminum phosphate adjuvant was pre-treated with 0.5 M KH2PO4 to minimize the adsorption of dephosphorylated alpha casein. The second model vaccine was composed of aluminum phosphate adjuvant and ovalbumin that was dephosphorylated by treatment with potato acid phosphatase. The third model vaccine consisted of aluminum phosphate adjuvant and lysozyme (LYS). In order to prevent adsorption of lysozyme, the aluminum phosphate adjuvant was pre-treated with fibrinogen, a protein present in interstitial fluid that binds strongly to aluminum phosphate adjuvant. Immunopotentiation was evaluated by measuring antibody production in mice. It was found that all three model vaccines induced antibody titers that were statistically higher than induced by a solution of antigen without adjuvant and similar to vaccines in which the antigens were adsorbed by aluminum phosphate adjuvant. Confocal microscopy experiments suggested that the antigens used in these experiments, even though not adsorbed to the aluminum phosphate adjuvant, were trapped in void spaces within the adjuvant aggregates, resulting in uptake of antigen by dendritic cells.

Secondary structures of proteins adsorbed onto aluminum hydroxide: Infrared spectroscopic analysis of proteins from low solution concentrations

Comparative studies of the secondary structures of six model proteins, adsorbed onto aluminum hydroxide gel (Alhydrogel) or in aqueous solution, were carried out by Fourier transform infrared (FTIR) spectroscopy. The analysis of high-quality spectra of all six model proteins, with a broad range of secondary structure compositions, obtained at 15 mg/ml by the conventional method and at 0.5 and 1.0 mg/ml adsorbed to Alhydrogel revealed that adsorption onto hydrophilic surfaces of aluminum hydroxide particles did not alter the secondary structures of the proteins. The results of this study suggest that adsorbing proteins to Alhydrogel provides a means of obtaining FTIR spectra to study secondary structure and conformational changes of proteins in aqueous solution at very low concentrations. The new procedure effectively lowers the concentration requirement for FTIR studies of proteins in aqueous solutions by at least 40-fold, as compared with the conventional FTIR method. It permits FTIR study of proteins to be carried out in the same concentration range as is used for circular dichroism and fluorescence, thereby making it possible to compare structural information obtained by three commonly used techniques in protein biophysical characterization.

Concentration determination of a recombinant vaccine antigen adsorbed onto an alum adjuvant by chemiluminescent nitrogen detection

PURPOSE

A chemiluminescent nitrogen detector (CLND) has been evaluated for determining the concentration of an aluminum-adsorbed recombinant vaccine antigen.

METHODS

Quantification of the antigen was based upon several nitrogen-containing compounds used to calibrate the CLND. All calibrants (6.75-400 microg/ml) generated linear standard curves, with slopes being directly proportional to the % nitrogen. The limit of quantification (LOQ) was determined to be 6.75 microg/ml based on the performance of the antigen standard curve, and the limit of detection (LOD) was defined by setting the CLND minimum peak area to 40,000 U. The CLND was capable of analyzing antigen-adjuvant suspensions (adsorbed + unbound antigen) without any sample pretreatment. To measure unbound antigen, the suspension was centrifuged and an aliquot of supernatant removed for analysis; the difference between these two measurements was the amount of adsorbed antigen.

RESULTS

The adjuvant exhibited no significant matrix effect. Samples were analyzed in triplicate with observed relative standard deviation values ranging from 0.065% to 10.0%. The most accurate concentrations of the antigen were recovered relative to the antigen itself and to glycine as standards.

CONCLUSION

This methodology provides a direct measurement of the concentration of a vaccine antigen adsorbed onto an aluminum adjuvant.

Spectroscopic characterization of antibodies adsorbed to aluminium adjuvants: correlation with antibody vaccine immunogenicity

MMA383 is an anti-idiotypic antibody designed as an immunogenic surrogate for the cancer specific Lewis Y antigen. Lewis Y is expressed in 70-90% of tumours of epithelial origin with limited expression in normal tissue. Five different MMA383 vaccines were prepared by mixing a MMA383 antibody solution with an Alhydrogel aluminium hydroxide adjuvant and tested on the biological activity in a rat model. The immunogenicity increased when: (i) the adjuvant was sterilized at 121 degrees C compared to no sterilization, (ii) the adjuvant was suspended in a phosphate buffer compared to water and (iii) the MMA383 solution was at a pH of 7.2. The immunogenicity of a ready-to-use MMA383 aluminium hydroxide suspension was the lowest. The in vivo data show that small differences in vaccine formulations before injection can generate significant changes in immunogenicity. Prior to mixing with the adjuvant, the physical and chemical characteristics of MMA383 antibodies were the same in all vaccines. Fluorescence and light scattering methods were developed to characterize antibodies in the presence of the adjuvant. Compared to the least active vaccines, the two most biologically active vaccines showed an increase in the antibody Trp fluorescence intensity, anisotropy, fluorescence lifetime, 90 degrees light-scatter, sedimentation velocity and rotational correlation time. Analysis of the 90 degrees light-scatter sedimentation kinetics indicates that stronger immune responses of vaccines can be related to the stronger binding of the antibodies to the adjuvants and the formation of more compact and condensed particles. Taken together, these results show a correlation between the in vitro fluorescence and light-scatter data and the in vivo immune response of the five MMA383 vaccines. The spectroscopic techniques described offer a new in vitro approach for the prediction of immune responses of different vaccine formulations.

Aluminium assay and evaluation of the local reaction at several time points after intramuscular administration of aluminium containing vaccines in the Cynomolgus monkey

Aluminium hydroxide and aluminium phosphate have been widely used as vaccine adjuvants with a good safety record for several decades. The recent observation in human deltoid muscle of macrophage aggregates containing aluminium hydroxide spicules and termed Macrophagic Myofasciitis (MMF) has encouraged research on aluminium salts. This study was conducted in order to further investigate the clearance of aluminium at the vaccine injection site and the features of induced histopathological lesions. Two groups of 12 monkeys were immunised in the quadriceps muscle with Diphtheria-Tetanus vaccines, which were adjuvanted with either aluminium hydroxide or aluminium phosphate. Three, six or twelve months after vaccination, four monkeys from each group were sacrificed and histopathological examination and aluminium assays were performed on quadriceps muscle sections. Histopathological lesions, similar to the MMF described in humans, were observed and were still present 3 months after aluminium phosphate and 12 months after aluminium hydroxide adjuvanted vaccine administration. An increase in aluminium concentration, more marked in the area of the lesions, was also observed at the 3- and 6-month time points. These findings were localised at the injection site and no similar changes were observed in the distal or proximal muscle fragments. We conclude from this study that aluminium adjuvanted vaccines administered by the intramuscular route trigger histopathological changes restricted to the area around the injection site which persist for several months but are not associated with abnormal clinical signs.

Distribution of adsorbed antigen in mono-valent and combination vaccines

The distribution of alpha-casein, bovine serum albumin (BSA), myoglobin and recombinant protective antigen (rPA) in mono-valent and combination vaccines containing aluminum hydroxide adjuvant was studied by fluorescence microscopy and flow cytometry. Green and red fluorescent probes were conjugated to the antigens. Adsorption isotherms of the fluorescently labeled proteins to aluminum hydroxide adjuvant demonstrated that incorporation of the fluorescent probe did not significantly affect the adsorption. In mono-valent vaccine systems, antigen adsorption occurred within one minute and uniform surface coverage of the adjuvant aggregates was observed within 1h. Content uniformity was achieved through a cycle of de-aggregation and re-aggregation of the aluminum hydroxide adjuvant aggregates caused by mixing. For combination vaccines, two antigens were adsorbed separately to the aluminum hydroxide adjuvant prior to combination. Following combination, cycles of de-aggregation and re-aggregation occurred due to mixing, which led to uniform distribution of both antigens. The results of this study indicate that content uniformity should not be an issue during the production of mono-valent or combination vaccines as long as adequate mixing procedures are followed.

Mechanism of adsorption of hepatitis B surface antigen by aluminum hydroxide adjuvant

Hepatitis B surface antigen (HBsAg) differs from many antigens because of its associated lipid bilayer that is largely composed of phospholipids. In general, phosphate groups adsorb strongly to hydroxylated mineral surfaces by ligand exchange. The purpose of this study was to investigate the mechanism of adsorption of hepatitis B surface antigen to aluminum hydroxide adjuvant with emphasis on the role of phospholipids in this adsorption. The adsorption of HBsAg by aluminum hydroxide adjuvant exhibits a high affinity adsorption isotherm. The Langmuir equation was used to calculate the adsorptive capacity (1.7 microg/microg Al), which is the amount of HBsAg adsorbed at monolayer coverage and the adsorptive coefficient (6.0 ml/microg), which is a measure of the strength of the adsorption force. The relatively high value of the adsorptive coefficient indicates that adsorption is due to a strong attractive force. Ligand exchange between a phosphate of the antigen and a surface hydroxyl of the adjuvant provides the strongest adsorption mechanism. The adsorption capacity of HBsAg was not affected by increased ionic strength indicating that electrostatic attraction is not the predominant adsorption force. Adsorption was also not affected by the addition of ethylene glycol indicating that hydrophobic interactions were not the predominant adsorption force. The strength of the adsorption force was indicated by the resistance of HBsAg to elution when exposed to interstitial fluid. Less than 5% of the HBsAg adsorbed to aluminum hydroxide adjuvant in a model vaccine was eluted during a 12 h in vitro exposure to interstitial fluid at 37 degrees C. Less than 1% of the adsorbed HBsAg in two commercial vaccines was eluted by in vitro exposure to interstitial fluid for 48 h at 37 degrees C. Thus, it was concluded that adsorption of HBsAg by aluminum hydroxide adjuvant is predominantly due to ligand exchange between the phospholipids in HBsAg and surface hydroxyls in aluminum hydroxide adjuvant.

N/A

N/A

Evaluation of the compatibility of a second generation recombinant anthrax vaccine with aluminum-containing adjuvants

Recombinant protective antigen (rPA) is the active pharmaceutical ingredient in a second generation anthrax vaccine undergoing pre-clinical evaluation. This rPA vaccine differs from the currently licensed vaccine, anthrax vaccine adsorbed (AVA), in that the sole component is a recombinant form of protective antigen (PA). Unlike AVA the rPA vaccine contains no lethal factor (LF) or edema factor (EF), components of the two bipartite toxins, nor many other Bacillus anthracis-related contaminating proteins that are present in AVA. The proposed clinical protocol involves adsorption of the rPA to an aluminum-based adjuvant. The adsorptive characteristics of rPA and two aluminum-containing adjuvants were examined in a physiological buffer with and without EDTA. Based on the pI of rPA (pI=5.6) and the zero charge point of aluminum hydroxide adjuvant (11.5) and aluminum phosphate adjuvant (4.5), it was predicted and demonstrated that rPA bound in a more efficient manner to aluminum hydroxide adjuvant than to aluminum phosphate adjuvant in the physiological buffer. Binding of the rPA to the aluminum hydroxide adjuvant was decreased by increasing amounts of phosphate in the buffer. The adsorptive capacity for rPA onto aluminum hydroxide adjuvant in the physiological buffer and in water were calculated to be 0.46 mg rPA/mg aluminum in DPBS and 0.73 mg rPA/mg aluminum in water. This study also demonstrated that upon desorption from the aluminum hydroxide adjuvant the rPA was physically intact and free of detectable aggregates. Further, the eluted material was biologically active in an in vitro cytotoxicity assay. Desorption was only possible after an overnight incubation of 2-8 degrees C and not after a room temperature incubation reflecting increased contact with the aluminum hydroxide adjuvant over time. These data suggest that the interaction between rPA and aluminum hydroxide adjuvant is predominantly electrostatic in character.

Relationship between the degree of antigen adsorption to aluminum hydroxide adjuvant in interstitial fluid and antibody production

The effect of the degree of adsorption after exposure to interstitial fluid on the immune response in mice to model vaccines containing ovalbumin, alpha casein or dephosphorylated alpha casein adsorbed to aluminum hydroxide adjuvant was studied. Ovalbumin and dephosphorylated alpha casein were adsorbed in the vaccine but were completely eluted when exposed to interstitial fluid for 4 h. The presence of aluminum hydroxide adjuvant in the vaccine produced immunopotentiation compared to a solution of the protein even though the protein desorbed rapidly upon subcutaneous administration. In contrast, alpha casein was completely adsorbed to aluminum hydroxide adjuvant in both the vaccine and upon exposure to interstitial fluid. Immunopotentiation by aluminum hydroxide adjuvant was also observed in this model vaccine compared to a solution of alpha casein. The results indicated that antigen presenting cells can take up desorbed antigen from interstitial fluid as well as antigen adsorbed to aluminum-containing adjuvants.

Measuring the surface area of aluminum hydroxide adjuvant

The traditional method of determining surface area, nitrogen gas sorption, requires complete drying of the sample prior to analysis. This technique is not suitable for aluminum hydroxide adjuvant because it is composed of submicron, fibrous particles that agglomerate irreversibly upon complete removal of water. In this study, the surface area of a commercial aluminum hydroxide adjuvant was determined by a gravimetric/FTIR method that measures the water adsorption capacity. This technique does not require complete drying of the adjuvant. Five replicate determinations gave a mean surface area of 514 m(2)/g and a 95% confidence interval of 36 m(2)/g for a commercial aluminum hydroxide adjuvant. The X-ray diffraction pattern and the Scherrer equation were used to calculate the dimensions of the primary crystallites. The average calculated dimensions were 4.5 x 2.2 x 10 nm. Based on these dimensions, the mean calculated surface area of the commercial aluminum hydroxide adjuvant was 509 m(2)/g, and the 95% confidential interval was 30 m(2)/g. The close agreement between the two surface area values indicates that either method may be used to determine the surface area of aluminum hydroxide adjuvant. The high surface area, which was determined by two methods, is an important property of aluminum hydroxide adjuvants, and is the basis for the intrinsically high protein adsorption capacity.

Aluminum toxicokinetics regarding infant diet and vaccinations

Some vaccines contain aluminum adjuvants to enhance the immunological response, and it has been postulated that this aluminum could contribute to adverse health effects, especially in children who receive a vaccination series starting at birth. The pharmacokinetic properties and end-point toxicities of aluminum are presented. In assessing the relevance of dietary and medical aluminum exposure to public health, we estimated infant body burdens during the first year of life for breast milk and formula diets and for a standard vaccination schedule. We then compared those body burdens with that expected for intake at a level considered safe for intermediate-duration exposure. The methodology blends intake values and uptake fractions with an aluminum retention function derived from a human injection study using radioactive 26Al. The calculated body burden of aluminum from vaccinations exceeds that from dietary sources, however, it is below the minimal risk level equivalent curve after the brief period following injection.

Mechanisms of stimulation of the immune response by aluminum adjuvants

Aluminum adjuvants are widely used in human and veterinary vaccines. They are appropriate adjuvants for vaccines that confer protection by inducing antibodies via the induction of a type 2 immune response, but they do not induce cytotoxic T cell and cell-mediated immunity. The mechanisms by which aluminum adjuvants selectively enhance the immune response are poorly understood. Following exposure to interstitial fluid in vitro and in vivo, most antigens are rapidly desorbed from aluminum adjuvants, suggesting that sustained release of antigen from a depot does not significantly contribute to the adjuvant effect of aluminum compounds. However, the adsorption of antigens onto aluminum salts may result in a high local concentration of antigen at the injection site and enhance the uptake by antigen-presenting cells. Aluminum compounds can further enhance the immune response by direct or indirect stimulation of dendritic cells, activation of complement and by inducing the release of chemokines. The relative importance of these mechanisms remains to be determined.

Improved immunogenicity and efficacy of the recombinant 19-kilodalton merozoite surface protein 1 by the addition of oligodeoxynucleotide and aluminum hydroxide gel in a murine malaria vaccine model

Vaccination of mice with yeast-secreted Plasmodium yoelii-derived 19-kilodalton merozoite surface protein 1 (yMSP1(19)) has been shown to afford protection from challenge with a lethal strain of P. yoelii. Sterile immunity can be achieved when MSP1(19) is emulsified in Freund adjuvant but not when it is adsorbed to aluminum hydroxide gel (alum). Because complete Freund adjuvant is not an acceptable adjuvant for use in humans, alternative adjuvants must be identified for formulating MSP1(19) as a vaccine for use in humans. To determine whether oligodeoxynucleotides with CpG motifs (ODN), reported to be a powerful new class of adjuvants, could enhance the immunogenicity of yMSP1(19), C57BL/6 mice were vaccinated either with yMSP1(19) formulated with Freund adjuvant, with alum, or with ODN plus alum and challenged intravenously with P. yoelii 17XL asexual blood-stage parasites. Adsorption of immunogen and adjuvant to alum was optimized by adjusting buffer (phosphate versus acetate) and pH. We found that the adjuvant combination of ODN plus alum with yMSP1(19), injected intraperitoneally (i.p.), increased immunoglobulin G (IgG) yMSP1(19)-specific antibody production 12-fold over Freund adjuvant given i.p., 3-fold over Freund adjuvant given subcutaneously (s.c.), 300-fold over alum given i.p., and 48-fold over alum given s.c. The predominant antibody isotype in the group receiving alum-ODN-yMSP1(19) was IgG1. Increased antibody levels correlated to protection from a challenge with P. yoelii 17XL. Supernatant cytokine levels of gamma interferon in yMSP1(19)-stimulated splenocytes were dramatically elevated in the alum-ODN-yMSP1(19) group. Interleukin-10 (IL-10) levels were also elevated; however, no IL-5 was detected. The cytokine profile, as well as the predominant IgG1 antibody isotype, suggests the protective immune response was a mixed Th1/Th2 response.

The role of the adsorption process for production and control combined adsorbed vaccines

For the production and control of adsorbed vaccines it is necessary to know and respect some basic features of adsorption. Among others these are the surface charges of adsorbents and antigens, the pH of the medium, the buffer components and the maturation process. They are important for the adsorption behaviour and have influence on the stability of the adsorbate and potency of the vaccine. Individually different conditions for optimal adsorption of antigens can be respected with a production strategy, where every antigen is adsorbed separately in a controlled manner, before it is mixed with other antigens to the final bulk vaccine. This strategy is favoured over strategies with sequential or competitive adsorption of the antigens.

Change in the degree of adsorption of proteins by aluminum-containing adjuvants following exposure to interstitial fluid: freshly prepared and aged model vaccines

The ability of interstitial fluid to change the degree of adsorption of ovalbumin to aluminum hydroxide adjuvant or lysozyme to aluminum phosphate adjuvant was studied. Ovalbumin and lysozyme were almost completely eluted after exposure at 37 degrees C to sheep lymph fluid for 4h or 15 min, respectively. The ability of sheep lymph fluid to elute lysozyme from aluminum phosphate adjuvant did not change as the model vaccine aged. However, only 60% of the ovalbumin adsorbed to aluminum hydroxide adjuvant was eluted during exposure to sheep lymph fluid for 24h after the model vaccine aged for 11 weeks at 4 degrees C.

Candidate vaccine against botulinum neurotoxin serotype A derived from a Venezuelan equine encephalitis virus vector system

A candidate vaccine against botulinum neurotoxin serotype A (BoNT/A) was developed by using a Venezuelan equine encephalitis (VEE) virus replicon vector. This vaccine vector is composed of a self-replicating RNA containing all of the VEE nonstructural genes and cis-acting elements and also a heterologous immunogen gene placed downstream of the subgenomic 26S promoter in place of the viral structural genes. In this study, the nontoxic 50-kDa carboxy-terminal fragment (H(C)) of the BoNT/A heavy chain was cloned into the replicon vector (H(C)-replicon). Cotransfection of BHK cells in vitro with the H(C)-replicon and two helper RNA molecules, the latter encoding all of the VEE structural proteins, resulted in the assembly and release of propagation-deficient, H(C) VEE replicon particles (H(C)-VRP). Cells infected with H(C)-VRP efficiently expressed this protein when analyzed by either immunofluorescence or by Western blot. To evaluate the immunogenicity of H(C)-VRP, mice were vaccinated with various doses of H(C)-VRP at different intervals. Mice inoculated subcutaneously with H(C)-VRP were protected from an intraperitoneal challenge of up to 100,000 50% lethal dose units of BoNT/A. Protection correlated directly with serum enzyme-linked immunosorbent assay titers to BoNT/A. The duration of the immunity achieved was tested at 6 months and at 1 year postvaccination, and mice challenged at these times remained refractory to challenge with BoNT/A.

A novel bipolar mode of attachment to aluminium-containing adjuvants by BBG2Na, a recombinant subunit hRSV vaccine

Human respiratory syncytial virus (hRSV) is a major pathogen responsible for bronchiolitis and severe pulmonary disease in very young children, immunodeficient patients and the elderly. BBG2Na, a recombinant chimeric protein produced in Escherichia coli, is a promising subunit vaccine candidate against this respiratory pathogen, composed of G2Na, the central domain of RSV G glycoprotein, and BB, an albumin binding domain of streptococcal protein G. BBG2Na has a basic isoelectric point (pI 9.3) and as expected, is strongly adsorbed by aluminium phosphate (AP). Surprisingly, BBG2Na is also strongly adsorbed by aluminium hydroxide (AH), which normally binds molecules with acidic isoelectric points. This behaviour was unexpected according to the well established adsorption model of Hem and co-workers. Our observations may be explained by the bipolar two-domain structure of the BBG2Na chimera which is not reflected by the global basic isoelectric point of the whole protein: the BB domain has an acidic isoelectric point (pI 5.5) and the G2Na domain a highly basic one (pI 10.0). Importantly, formulation in either aluminium salt resulted in equally high immunogenicity and protective efficacy against RSV in mice. From a physicochemical point of view, this unique property of BBG2Na makes it eminently suitable for combination to either paediatric or elderly multivalent AH- or AP-containing vaccines already in the market or in development.

Degree of antigen adsorption in the vaccine or interstitial fluid and its effect on the antibody response in rabbits

The effect of the degree of adsorption of lysozyme by aluminium hydroxide adjuvant on the immune response in rabbits was studied. The surface charge of the adjuvant was modified by pretreatment with phosphate anion to produce five vaccines having degrees of adsorption ranging from 3 to 90%. The degree of adsorption of vaccines exhibiting 3, 35 or 85% adsorption changed to 40% within 1 h after each vaccine was mixed with sheep interstitial fluid to simulate subcutaneous administration. The mean anti-lysozyme antibody titers produced by the vaccines were the same and were four times greater than that produced by a lysozyme solution. Thus, the degree of adsorption of lysozyme in sheep interstitial fluid rather than the degree of adsorption in the vaccine correlated with the immune response.