Mismanagement of Plastic Waste through Open Burning with Emphasis on the Global South: A Systematic Review of Risks to Occupational and Public Health

Accelerating biodegradation efficiency of low-density polyethylene and its hazardous dissolved organic matter using unexplored polyolefin-respiring bacteria: New insights on degradation characterization, biomolecule influence and biotransformation pathways

The COVID-19 outbreak has significantly increased low-density polyethylene (LDPE) waste in landfills, posing new environmental risks due to the release of hazardous dissolved organic matter (DOM). Current LDPE degradation technologies are inadequate and are restricted by a limited understanding of the biotransformation pathway. This study aims to accelerate the biodegradability of LDPE and DOM using Morganella morganii PQ533186 isolated from LDPE-laden municipal landfill. The in-vitro LDPE biodegradation demonstrated a 42.18 % weight loss within 120 days. The accelerated biodegradability of LDPE by M. morganii is attributed to the concurrent production of biocatalysts and bio-amphiphiles, coupled with effective bacterial colonization on LDPE surfaces. The FT-IR analysis reveals oxidation with enhancement in O-H (11.29-folds), CO (17.65-folds), CC (6.70-folds), C-O (8.51-folds), and C-O-C (6.37-folds) indices. The DSC and XRD analyses divulge reduced crystallinity (33.57 %) and increased interplanar d-spacing of (110) and (200) reflections from 4.09 and 3.71 Å to 4.17 and 3.80 Å, respectively. The Raman, XPS, TG-DTG, and Contact-angle measurements demonstrate reduced density, carbon content, thermal stability, and hydrophobicity. The degradation was confirmed using 1H NMR, GC-MS, and Py/GC-MS analyses. Furthermore, DOM released from LDPE biodegradation, comprising monomers and additives was biodegraded with an 84.61 % COD reduction within 6 days. The mechanistic investigation elucidated a two-stage oxidoreductase and hydrolase-mediated LDPE biotransformation pathway involving biocatalytic oxidation and DOM release. Subsequently, the released DOM undergoes terminal biocatalytic oxidation, yielding simpler non-toxic end products. The present study is the first report to present novel insights into the degradation characterization, pivotal contribution of biomolecules, and in-depth biotransformation pathways which are responsible for the accelerated degradation of both LDPE and hazardous DOM.

Polymer waste and pollution in oral healthcare clinics: a systematic review

BACKGROUND

Modern oral healthcare extensively uses polymer items and devices derived from various monomeric compounds. These materials are essential for personal protective equipment, infection barriers, packaging, and intraoral devices. The COVID-19 pandemic has led to an increased reliance on single-use polymer items, causing supply chain disruptions and higher costs. This systematic review explores the extent of polymer waste and pollution generated in oral healthcare clinics.

MATERIALS AND METHODS

A systematic review protocol was registered with PROSPERO and was formatted according to PRISMA guidelines and SWiM recommendations. Eligibility criteria included studies that provided quantified estimates of polymer waste or pollution in air or wastewater from oral healthcare clinics. Comprehensive electronic searches were conducted across several bibliometric databases, followed by data extraction and risk of bias assessments performed by two independent reviewers.

RESULTS

A total of thirty studies were included in the review. Sixteen papers reported on waste audits that detailed polymer waste data, while eight studies focused on pollution caused by polymer nano- and microparticles in clinical settings. Additionally, six experimental studies investigated potential leakage of monomeric eluates or polymer particles from landfill waste. There was significant variation in the amount of polymer waste generated per patient, ranging from 81 to 384 g per operatory room per day. On-site sampling revealed the presence of polymer nano- and microparticles in the clinic air, which was influenced by dental procedures and the equipment used.

CONCLUSIONS

This review highlights critical knowledge gaps about polymer waste and pollution in oral healthcare clinics. The variability of study designs limited the feasibility of meta-analysis. Current evidence indicates substantial polymer waste generation, particularly from single-use items, as well as potential environmental impacts from monomeric eluates and polymer microparticles. Future research should focus on sustainable polymer waste management solutions to reduce environmental pollution in oral healthcare settings.

Regional land-based plastic leakage into the aquatic environment - Waste Flow Diagram applied to the Phu Yen province, Vietnam

Land-based plastic waste is the primary source of ocean plastic pollution, but data regarding its origins and pathways remain limited. This study adapted the Waste Flow Diagram (WFD) tool, initially developed for city-level plastic leakage assessment, for regional application in Phu Yen province, Vietnam. This adaptation aims to capture plastic leakage dynamics across a broader spatial scale to account for all significant sources contributing to ocean plastic pollution. The results show that, excluding Tuy Hoa City, Phu Yen contributes 9.4 kg per capita per year to aquatic environments. Most leakage (88.6 %) originated from uncollected waste in areas lacking collection services. Additional leakage arises from waste collection and transport (7.9 %), disposal sites (2.8 %), and informal activities (0.6 %). Leakage varies widely across districts, ranging from 1 to 55.7 kg/cap/year. The findings offer valuable insights for targeted interventions and policies aimed to enhance waste collection coverage and mitigate regional marine plastic pollution.

Probiotics improve lung function and QOL in participants with exposure to fine particulate matter air pollution: a randomized, double-blind, placebo-controlled clinical trial

Background: Probiotics have been reported to alleviate pulmonary inflammation through the gut-lung axis. However, their effects on PM2.5-induced toxic reactions have not yet been well studied. Objective: This study aims to investigate the effects of probiotics on lung function and quality of life in participants exposed to PM2.5, as well as to explore the potential mechanisms underlying these effects. Methods: 120 volunteers were randomly assigned in a double-blind manner to receive either a placebo or 2.5 × 109 cfu g-1 LGG probiotics once daily for four consecutive weeks, with a follow-up period of 6 months. An analysis of covariance was conducted for data statistics, using PM2.5 exposure and baseline measurements as covariates. Least squares means and their 95% confidence intervals were calculated to explore the effect of PM2.5 exposure on changes in the intestinal microbiota. A mixed linear model analysis was used to construct a model with baseline values and PM2.5 exposure as covariates to analyse the effects of PM2.5 on SF-36, COOP/WONCA charts, and lung function, and the intervention effect of LGG on these parameters. Results: 120 participants were included. Probiotic intervention demonstrated benefits in the Shannon index and β diversity. After the probiotic intervention, the scores of quality-of-life charts increased during the follow-up period. The pulmonary function indicators, including FEV1, FEF50%, and FEF75%, were statistically different from those in the placebo group. Conclusion: Probiotic intervention can reshape the gut microbiota, offering potential benefits for improving the quality of life in participants chronically exposed to PM2.5.

Potential exposure to metals-bound particulate during open burning of different waste materials

Smoke caused by open waste burning (OWB) contains metal-bound particulates that can harm human health. This study aimed to understand the differences in the exposure of particulate matter 10 and 2.5 µm (PM10 and PM2.5) concentrations in several distances and investigated potential health impacts of metal-bound particulates. Observations were made based on laboratory and field studies consisting of multiple open burning practices, PM capture, and inductively coupled plasma optical emission spectrometry (ICP-OES) analysis. Moreover, the potential health risks in terms of respiratory deposition dose (RDD), carcinogenic risk (CR), and non-carcinogenic risks were determined. The results showed that the exposure levels in the distance range of 1 - 5 m were not significantly different (0.419 - 0.607 mg/m3 for PM10 and 0.289 - 0.399 mg/m3 for PM2.5). During the day, RDD values were higher for adults (2.58 - 5.79 µg/min), with adults facing greater short-term exposure risk (2.45 - 5.79 µg/min) than children (2.22 - 3.90 µg/min). It was found that the highest CR from the ingestion pathway was caused by arsenic (As) from textile burning (1.41 × 10-6), and that caused by chromium (Cr) through the inhalation pathway from backyard waste burning (7.43 × 10-9). However, the CR values for both the pathways were below the acceptable threshold. In addition, the hazard index (HI), for both adults and children were less than 1 for all metal concentrations in all types of waste burning. The higher HI value in children indicates that they are most vulnerable to long-term exposure to OWB. Preventive actions to reduce OWB activity are necessary to reduce the adverse health effects.

Does exposure enhance interest? An analysis of composting exposure on interest in household waste management

With the increasing amount of household waste produced in developing countries' municipalities, composting can be a crucial alternative to ease the burden of disposal. This study utilizes primary survey data to investigate the association between households' exposure to public composting campaigns and the interest in composting in Siddharthanagar Municipality, Nepal. We also use household attitudes, knowledge, barriers, and policy variables. Further, using our geo-referenced data as a novel approach, we probe the spatial connections between exposure and interest and investigate any inter-regional differences by constructing spatial maps. The dichotomous model results indicate a significant positive impact of exposure to composting campaigns on interest in composting, and the results remain consistent after the robustness check. Further, spatial autocorrelation is evident for composting exposure and interest. The spatial maps indicate inter-regional similarity for these variables. These results indicate the urge for policies that extensively promote public information regarding composting at the household level.

Emerging investigator series: open dumping and burning: an overlooked source of terrestrial microplastics in underserved communities

Open dumping and burning of solid waste are widely practiced in underserved communities lacking access to solid waste management facilities; however, the generation of microplastics from these sites has been overlooked. We report elevated concentrations of microplastics (MPs) in soil of three solid waste open dump and burn sites: a single-family site in Tuttle, Oklahoma, USA, and two community-wide sites in Crow Agency and Lodge Grass, Montana, USA. We extracted, quantified, and characterized MPs from two soil depths (0-9 cm and 9-18 cm). The average of abundance of particles found at community-wide sites three sites (18, 460 particles kg-1 soil) equals or exceeds reported concentrations from currently understood sources of MPs including biosolids application and other agricultural practices. Attenuated total reflectance Fourier transformed infrared (ATR-FTIR) identified polyethylene as the dominant polymer across all sites (46.2-84.8%). We also detected rayon (≤11.5%), polystyrene (up to 11.5%), polyethylene terephthalate (≤5.1), polyvinyl chloride (≤4.4%), polyester (≤3.1), and acrylic (≤2.2%). Burned MPs accounted for 76.3 to 96.9% of the MPs found in both community wide dumping sites. These results indicate that solid waste dumping and burning activities are a major source of thermally oxidized MPs for the surrounding terrestrial environment with potential to negatively affect underserved communities.

Burnt Plastic (Pyroplastic) from the M/V X-Press Pearl Ship Fire and Plastic Spill Contain Compounds That Activate Endocrine and Metabolism-Related Human and Fish Transcription Factors

In May 2021, the M/V X-Press Pearl ship fire disaster led to the largest maritime spill of resin pellets (nurdles) and burnt plastic (pyroplastic). Field samples collected from beaches in Sri Lanka nearest to the ship comprised nurdles and pieces of pyroplastic. Three years later, the toxicity of the spilled material remains unresolved. To begin understanding its potential toxicity, solvent extracts of the nurdles and pyroplastic were screened for their bioactivity by several Attagene FACTORIAL bioassays (TF, NR, and AquaTox), which measured the activity of a combined 70 human transcription factor response elements and nuclear receptors and 6 to 7 nuclear receptors for each of three phylogenetically distinct fish species. Extracts of the pyroplastics robustly activated end points for the human aryl hydrocarbon receptor (AhR), estrogen receptor (ER), pregnane X receptor (PXR), peroxisome proliferator-activated receptor (PPAR), retinoid X receptor (RXR), and oxidative stress (NRF2) and had the potential for activation of several others. The bioactivity profile of the pyroplastics was most similar (similarity score = 0.96) to that of probable human carcinogens benzo[b]fluoranthene and benzo[k]fluoranthene despite the extracts being a complex mixture of thousands of compounds. The activity diminished only slightly for extracts of pyroplastic collected eight months after the spill. The AquaTox FACTORIAL bioassay measured the activation of ERα, ERβ, androgen receptor (AR), PPARα, PPARγ, and RXRβ for human, zebrafish (Danio rerio), Japanese medaka (Oryzias latipes), and rainbow trout (Oncorhynchus mykiss), revealing species-specific sensitivities to the chemicals associated with the pyroplastics. These findings provide needed information to guide long-term monitoring efforts, make hazard assessments of the spilled material, and direct further research on pyroplastic, an emerging global contaminant.

PRECIS-2 used as an implementation science tool for global environmental health: A cross-sectional evaluation of the Ecolectivos study protocol to reduce burning of household plastic waste in rural Guatemala

BACKGROUND

Randomized controlled trials (RCTs) that evaluate the efficacy of an intervention remain underutilized in community-based environmental health research. RCTs that use a pragmatic design emphasize the effectiveness of interventions in complex, real world settings. Pragmatic trials may be especially relevant when community-based interventions address social and environmental determinants that threaten health equity. The revised Pragmatic Explanatory Continuum Indicator Summary (PRECIS-2) is a validated tool developed in 2015 by trialists to ensure that clinical trials are designed to fit their intended purpose, with an assessment of applicability of the trial results to specific contexts. The purpose of this cross-sectional study was to ask Ecolectivos study investigators and external implementation scientists to evaluate the Ecolectivos study protocol using the PRECIS-2 tool prior to the launch of the trial. Ecolectivos is an implementation science study, using a village-level cluster randomized controlled trial design, to assess a behavioral intervention to reduce household plastic waste burning in rural Guatemala.

METHODS

We invited 60 researchers to participate in an online survey between February 2022 and January 2023. Respondents were asked to review the Ecolectivos study protocol and provide scores for the nine PRECIS-2 domains (eligibility, recruitment, setting, organization, flexibility-delivery, flexibility-adherence, follow-up, primary outcome, and primary analysis), with short responses explaining their score. The PRECIS-2 tool is used to assess the degree of pragmatism, ranked on a five-point Likert scale from very explanatory (Checkley W, 2022) to very pragmatic (Ashcraft LE, 2024). Descriptive statistics were used to compare responses between Ecolectivos investigators and external evaluators.

RESULTS

Twenty-five respondents provided data. Among the nine domains, four were rated as pragmatic-eligibility, setting, flexibility-delivery, and primary analysis. Four were evaluated to be equally pragmatic as explanatory-recruitment, organization, flexibility-adherence, and primary outcome. One domain was primarily explanatory in nature-follow-up. Only one domain, eligibility, was statistically significantly different between Ecolectivos investigators and external evaluators, demonstrating that the two groups were broadly consistent in their opinions in eight of the nine study domains. Using the PRECIS-2 tool, we found that our study protocol was viewed as more pragmatic than explanatory, providing evidence to support the pragmatic approach of the Ecolectivos study goals, which is to reduce burning of plastic waste and plastic use in community settings using a behavioral intervention.

CONCLUSIONS

By evaluating the degree of pragmatism within the nine domains, PRECIS-2 guides investigators to think about the applicability of potential results. Investigator assessment and communication regarding intervention protocols for community-level environmental interventions, their degree of pragmatism, and external validity are important for identifying strategies to address complex community problems. Our findings contribute to the growing body of literature that addresses greater research utility through pragmatic trial design, tying community environmental health interventions to the rigor of implementation science strategies.

Would the Oceans Become Toxic to Humanity Due to Use and Mismanagement of Plastics?

The production of plastics and associated products, including microplastics (MPs), has been surging over the past several decades and now poses a grave environmental threat. This is because when not appropriately recycled, incinerated, or disposed of in fully contained landfills, plastic waste manifests as a potent pollutant, with vast amounts finding their way into oceans annually, adversely impacting marine life and ecosystems. Additionally, research also confirms there are direct impacts from MPs on water, air, and soil, impacting ecosystem and human health. This study investigated all aspects of plastics and microplastics such as their generation and consumption, their presence in oceans, and their ultimate fate. Next, a comprehensive literature search was performed to identify impacts MPs have on watercourses and soils and eventually on the ocean, taking into consideration the coupled impacts of metals and emerging contaminants adsorbed onto MPs. Then, a model to estimate the number of MPs in oceans and then using toxicity of MPs to humans and aquatic life to estimate when oceans would become toxic to humanity is described. Utilizing the model, it is possible to estimate the year when MPs in the ocean could potentially become broadly toxic, for both humanity and marine life, under different emissions scenarios. The estimates conclude that with the current MP discharge growth, oceans would become toxic to humanity between 2398 and 2456, for MP discharge growth only until 2020, it could be reached between 2408 and 2472, and for emissions ending in 2020, oceans would not become toxic to the humanity. Finally, remediation strategies are described to prevent oceans from becoming toxic to humanity by focusing on various action items such as education and awareness, reducing the utilization of single-use plastic, and conventional and innovative strategies that can be used for the treatment of stormwater and wastewater.

Contribution of plastic solid components to volatile organic compounds formation during plastics combustion

The combustion of plastic waste releases volatile organic compounds (VOCs) that are harmful to human health. However, information on the micro-mechanisms of VOC formation remains lacking. Here, the study hypothesized and verified the relationship between VOC formation and solid component degradation during plastics combustion. The VOCs released during plastics combustion exhibit characteristics such as low carbon content (nc< 10), volatility (9 μg m-3 < log10C0 < 11 μg m-3), and medium oxidation degree (-1.5 < OSC¯ < -0.5). The dominant VOCs ketones/aldehydes/acids (33-43 %) may be attributed to the depolymerization of the polymer structure of plastics, the oxidation of C-O/CO groups, and the secondary cleavage of gaseous oxygen-containing macromolecules. The VOCs released from the combustion of polyethylene terephthalate (PET) and poly(butyleneadipate-co-terephthalate) (PBAT) contained more aromatics than polyethylene (PE) and polypropylene (PP). And the temperature response of aromatics released from PET and PBAT lagged other VOCs compared that of PP and PE. However, compared to biomass thermal conversion, combustion of plastics releases fewer aromatics and nitrogenous compounds. Collectively, this work shows that the formation mechanisms of VOCs contributed by the solid components during plastic combustion are similar for PET and PBAT due to their similar chemical structures. The proposed mechanism in this paper will provide insight into the control of contaminants during plastic combustion.

A systematic evidence map protocol for mapping global exposure to bisphenols and their alternatives and social and environmental justice implications

BACKGROUND

Bisphenol A (BPA) is one of the highest-volume chemicals produced worldwide, and human exposure to BPA is thought to be ubiquitous. Stricter regulations around the use of BPA have led many manufacturers to switch to other bisphenol chemicals with similar functions such as bisphenol S and F. Even though exposure to BPA, other bisphenol chemicals and bisphenol alternatives poses a health risk for humans, very little is known about the granular exposure levels of different populations around the world.

AIM

This systematic evidence map (SEM) will identify human studies reporting concentrations of bisphenols and their alternatives measured in human bio-samples with the aim to chart the global human exposure levels by country and population characteristics to identify research gaps and discuss any social and environmental injustice implications.

SEARCH STRATEGY AND ELIGIBILITY CRITERIA

MEDLINE®, Embase and Web of Science (WoS) databases as well as grey literature sources will be searched using predefined search strings. The database search results will be supplemented by backward and forward citation tracking on included studies. A scoping exercise conducted during planning identified 90 bisphenol chemicals and alternatives used in plastics. These include BPA, other bisphenol chemicals with/without similar functions to BPA as well as alternatives with similar functions to bisphenol chemicals. Eligible studies must measure concentrations of at least one relevant bisphenol chemical/alternative in human bio-samples.

STUDY SELECTION

Only primary studies published in English since 2010 will be considered. The title, abstract and keywords will be screened by the DistillerAI tool and two independent reviewers. Grey literature will be screened by two reviewers for inclusion and exclusion. The full text of the included studies will then be screened by two independent reviewers.

STUDY APPRAISAL

Study quality will not be evaluated in this SEM.

DATA EXTRACTION AND CODING

Data extraction and coding will be performed by two independent reviewers. Parameters of interest will include the following: study characteristics (e.g., year of publication, sampling timepoints and study design), population information (e.g., country, age, sex, ethnicity, number of participants) and exposure information (sources of exposure, bio-sample analyzed, chemical name, concentration, and detection frequencies).

SYNTHESIS AND VISUALIZATION

The results will be presented using a narrative summary, tables, bar plots and color-coded maps. The interactive database will be available on a dedicated freely accessible website.

SYSTEMATIC MAP PROTOCOL REGISTRY AND REGISTRATION NUMBER

This protocol has been registered on Open Science Framework (OSF) and is available at https://doi.org/10.17605/OSF.IO/MNWTD.

Improving Thermo-Sealing of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by Blending with Polycaprolactone

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a biodegradable biopolymer from the PHAs family that has potential to replace conventional plastics and reduce plastic pollution. However, PHBV has thermo-sealability issues, making it challenging to use for bags. Blending it with polycaprolactone (PCL) could address this but may alter the barrier properties of the films, affecting their effectiveness as food packaging material. This study examined the properties and heat-sealing capacity of PHBV/PCL blend films (ratios: 60/40, 50/50, and 40/60), obtained by melt blending and compression moulding. Both polymers are immiscible and were in separated phases; the continuous phase was PHBV in the 60/40 blend and PCL in the 40/60 blend, while the 50/50 sample exhibited interpenetrating bicontinuous phases of both polymers. The permeability to water vapour, oxygen, and D-limonene increased as the PCL content rose, especially when it formed the continuous phase in the matrix. The elastic modulus and resistance to break decreased, while extensibility increased, more markedly when PCL was the continuous phase. However, the continuity of PCL phase provided the films with better thermal adhesion and seal strength. The 50/50 blend showed the best balance between heat sealability and barrier properties, making it the most suitable for food packaging in sealed bags.

Photoaging-induced variations in heteroaggregation of nanoplastics and suspended sediments in aquatic environments: A case study on nanopolystyrene

Photoaging of nanoplastics (NPs) and heteroaggregate with suspended sediments (SS) determines transport processes and ecological risks of NPs in aquatic environments. This study investigated the disruption of photoaging on the heteroaggregation behavior of polystyrene NPs (PSNPs) and SS in different valence electrolyte solutions and deduced the interaction mechanisms by integrating aggregation kinetics and molecular dynamics (MD) simulation. Increasing the electrolyte concentration significantly enhanced the heteroaggregation between PSNPs and SS, and the divalent electrolytes induced the heteroaggregation more efficiently. MD simulation at the molecular level revealed that PS and SS could spontaneously form clusters, and photoaged PS has a stronger potential to fold into a dense state with SS. Photoaging for 30 d retarded heteroaggregation due to the steric hindrance produced by the leached organic matter in NaCl solutions, and the critical coagulation concentration (CCC) increased by >85.44 %. Contrarily, photoaging caused more oxygen-containing functional groups produced on the surface of PSNPs through Ca2+ bridging promoting heteroaggregation and thus destabilizing in CaCl2 solutions, the CCC decreased by 23.53 % ∼ 35.29 %. These findings provide mechanistic insight into the environmental process of NPs and SS and are crucial for a comprehensive understanding of the environmental fate and transport of NPs in aquatic environments.

Innovations in plastic remediation: Catalytic degradation and machine learning for sustainable solutions

Plastic pollution is an extreme environmental threat, necessitating novel restoration solutions. The present investigation investigates the integration of machine learning (ML) techniques with catalytic degradation processes to improve plastic waste management. Catalytic degradation is emphasized for its efficiency and selectivity, while several machine learning techniques are assessed for their capacity to enhance these processes. The review goes into ML applications for forecasting catalyst performance, determining appropriate reaction conditions, and refining catalyst design to improve overall process performance. Briefing about the reinforcement, supervised, and unsupervised learning algorithms that handle all complex data and parameters is explained. A techno-economic study is provided, evaluating these ML-driven system's performance, affordability, and environmental sustainability. The paper reviews how the novel method integrating ML with catalytic degradation for plastic cleanup might alter the process, providing new insights into scalable and sustainable solutions. This review emphasizes the usefulness of these modern strategies in tackling the urgent problem of plastic pollution by offering a comprehensive examination.

Review of microplastics and chemical risk posed by plastic packaging on the marine environment to inform the Global Plastics Treaty

Plastic overproduction and the resulting increase in consumption has made plastic pollution ubiquitous in all ecosystems. Recognizing this, the United Nations (UN) has started negotiations to establish a global treaty to end plastic pollution, especially in the marine environment. The basis of the treaty has been formulated in terms of turning off the tap, signaling the will to prevent plastic pollution at its source. Based on the distribution of plastic production by sector, the plastic packaging sector consumes the most plastic. The volume and variety of chemicals used in plastic packaging, most of which is single-use, is a major concern. Single-use plastics including packaging is one of the most dominant sources of plastic pollution. Plastic waste causes pollution in water, air and soil by releasing harmful chemicals into the environment and can also lead to exposure through contamination of food with micro- and nano-plastic particles and chemicals through packaging. Marine life and humans alike face risks from plastic uptake through bioaccumulation and biomagnification. While the contribution of plastics ingested to chemical pollution is relatively minor in comparison to other pathways of exposure, the effect of plastic waste on marine life and human consumption of seafood is beyond question. To reduce the long-term impact of plastic, it is crucial to establish a global legally binding instrument to ensure the implementation of upstream rather than downstream solutions. This will help to mitigate the impact of both chemicals and microplastics, including from packaging, on the environment.

A local-to-global emissions inventory of macroplastic pollution

Negotiations for a global treaty on plastic pollution1 will shape future policies on plastics production, use and waste management. Its parties will benefit from a high-resolution baseline of waste flows and plastic emission sources to enable identification of pollution hotspots and their causes2. Nationally aggregated waste management data can be distributed to smaller scales to identify generalized points of plastic accumulation and source phenomena3-11. However, it is challenging to use this type of spatial allocation to assess the conditions under which emissions take place12,13. Here we develop a global macroplastic pollution emissions inventory by combining conceptual modelling of emission mechanisms with measurable activity data. We define emissions as materials that have moved from the managed or mismanaged system (controlled or contained state) to the unmanaged system (uncontrolled or uncontained state-the environment). Using machine learning and probabilistic material flow analysis, we identify emission hotspots across 50,702 municipalities worldwide from five land-based plastic waste emission sources. We estimate global plastic waste emissions at 52.1 [48.3-56.3] million metric tonnes (Mt) per year, with approximately 57% wt. and 43% wt. open burned and unburned debris, respectively. Littering is the largest emission source in the Global North, whereas uncollected waste is the dominant emissions source across the Global South. We suggest that our findings can help inform treaty negotiations and develop national and sub-national waste management action plans and source inventories.

Brominated Flame Retardants (BFRs) in China Over the Past Half-Century: Stocks, Flows, Fates, and Ecological Risks

China is a significant producer and consumer of various brominated flame retardants (BFRs), raising environmental concerns due to their widespread presence and potential threats to ecosystems and organisms. This study adopts a life cycle perspective, combining material flow analysis, multimedia environmental modeling, and ecological risk assessment to systematically analyze the substance metabolism and ecological risks of six BFR types in China from 1970 to 2021. The findings reveal that China's cumulative BFR consumption reached 3.3 Mt, with the electronics sector being the predominant contributor at 52.1%. Consequently, 1.5 kt of BFRs were released into the environment, with 24.9%, 31.5%, and 43.6% being discharged into the air, water, and soil, respectively. Notably, the proportion of novel BFRs in emissions has steadily increased over the years, exemplified by the increase in decabromodiphenyl ethane (DBDPE) from 21.3% in 2010 to 30.1% in 2021. Geographically, BFR concentrations are higher in the eastern and southwestern regions compared to those in the northwest. Presently, certain BFRs like tetrabromobisphenol A (TBBPA) and DBDPE exhibit moderate to high ecological risks, primarily concentrated in the Shandong and Sichuan provinces. A combination of efficient recycling, emission control, and substitution with novel flame-retardant can minimize the exposure of BFRs to the environment and organisms.

From Plastic Waste to Green Hydrogen and Valuable Chemicals Using Sunlight and Water

Over 79 % of 6.3 billion tonnes of plastics produced from 1950 to 2015 have been disposed in landfills or found their way to the oceans, where they will reside for up to hundreds of years before being decomposed bringing upon significant dangers to our health and ecosystems. Plastic photoreforming offers an appealing alternative by using solar energy and water to transform plastic waste into value-added chemical commodities, while simultaneously producing green hydrogen via the hydrogen evolution reaction. This review aims to provide an overview of the underlying principles of emerging plastic photoreforming technologies, highlight the challenges associated with experimental protocols and performance assessments, discuss recent global breakthroughs on the photoreforming of plastics, and propose perspectives for future research. A critical assessment of current plastic photoreforming studies shows a lack of standardised conditions, hindering comparison amongst photocatalyst performance. Guidelines to establish a more accurate evaluation of materials and systems are proposed, with the aim to facilitate the translation of promising fundamental discovery in photocatalysts design.

A critical review and analysis of plastic waste management practices in Rwanda

Plastic products are now essential commodities, yet their widespread disposal leads to environmental and human health effects, particularly in developing nations. Therefore, developing nations require comprehensive studies to assess the current state of plastic and plastic waste production to enhance plastic waste management practices. This review analyzes the import and export of plastic and the production of plastic waste in Rwanda, aiming to improve waste management practices. This review used open-access papers, reports, and websites dealing with plastic waste management. In this review, 58 articles from the Web of Science and 86 from other search engines were consulted to write this review. The findings revealed that the daily estimated plastic waste produced per person ranges between 0.012 and 0.056 kg. The estimated amount of plastic waste generated per person per year in Rwanda could be between 4.38 and 20.44 kg. Plastic waste accounts for between 1 and 8% of the total municipal solid waste produced per person per day in the country, which ranges from 219 to 255.5 kg. The average annual amount of imported plastics could reach 568.2881 tons, whereas the average quantity of exported plastics could reach 103.7414 tons. This shows that plastic management practices have not yet adopted technically advanced or improved practices, which should concern efforts to protect our environment. This study suggests approaches that can vastly improve plastic waste management and potentially open massive opportunities for the people of Rwanda.

Microplastics in aquatic systems: An in-depth review of current and potential water treatment processes

Plastic products, despite their undeniable utility in modern life, pose significant environmental challenges, particularly when it comes to recycling. A crucial concern is the pervasive introduction of microplastics (MPs) into aquatic ecosystems, with deleterious effects on marine organisms. This review presents a detailed examination of the methodologies developed for MPs removal in water treatment systems. Initially, investigating the most common types of MPs in wastewater, subsequently presenting methodologies for their precise identification and quantification in aquatic environments. Instruments such as scanning electron microscopy, dynamic light scattering, Fourier transform infrared spectroscopy, Raman spectroscopy, surface-enhanced Raman spectroscopy, and Raman tweezers stand out as powerful tools for studying MPs. The discussion then transitions to the exploration of both existing and emergent techniques for MPs removal in wastewater treatment plants and drinking water treatment plants. This includes a description of the core mechanisms that drive these techniques, with an emphasis on the latest research developments in MPs degradation. Present MPs removal methodologies, ranging from physical separation to chemical and biological adsorption and degradation, offer varied advantages and constraints. Addressing the MPs contamination problem in its entirety remains a significant challenge. In conclusion, the review offers a succinct overview of each technique and forwards recommendations for future research, highlighting the pressing nature of this environmental dilemma.

Impacts associated with the plastic polymers polycarbonate, polystyrene, polyvinyl chloride, and polybutadiene across their life cycle: A review

Polymers are the main building blocks of plastic, with the annual global production volume of fossil carbon-based polymers reaching over 457 million metric tons in 2019 and this figure is anticipated to triple by 2060. There is potential for environmental harm and adverse human health impacts associated with plastic, its constituent polymers and the chemicals therein, at all stages of the plastic life cycle, from extraction of raw materials, production and manufacturing, consumption, through to ultimate disposal and waste management. While there have been considerable research and policy efforts in identifying and mitigating the impacts associated with problematic plastic products such as single-use plastics and hazardous chemicals in plastics, with national and/or international regulations to phase out their use, plastic polymers are often overlooked. In this review, the polymer dimension of the current knowledge on environmental release, human exposure and health impacts of plastic is discussed across the plastic life cycle, including chemicals used in production and additives commonly used to achieve the properties needed for applications for which the polymers are generally used. This review focuses on polycarbonate, polystyrene, polyvinyl chloride, and polybutadiene, four common plastic polymers made from the hazardous monomers, bisphenol, styrene, vinyl chloride and 1,3-butadiene, respectively. Potential alternative polymers, chemicals, and products are considered. Our findings emphasise the need for a whole system approach to be undertaken for effective regulation of plastics whereby the impacts of plastics are assessed with respect to their constituent polymers, chemicals, and applications and across their entire life cycle.

Social competition drives collective action to reduce informal waste burning in Uganda

Improving urban air quality is a pressing challenge in the Global South. A key source of air pollution is the informal burning of household waste. Reducing informal burning requires governments to develop formal systems for waste disposal and for residents to adopt new disposal behaviors. Using a randomized experiment, we show that social competitions between pairs of neighborhoods in Nansana municipality, Uganda, galvanized leadership and inspired collective action to reduce informal burning. All 44 neighborhoods in the study received a public health campaign, while 22 treated neighborhoods were paired and competed to reduce waste burning over an 8-mo period. Treated neighborhoods showed a 24 percent reduction (95% CI: 11 to 35 percent) in waste burning relative to control neighborhoods at the end of the competition period. There is no evidence that treated neighborhoods experienced a rebound in waste burning several months after the competitions. Community leaders reported greater effort in coordinating residents and more pride in their neighborhood when assigned to the competition treatment. These results suggest that creating focal points for leadership and collective action can be an effective and low-cost strategy to address policy problems that require broad participation and costly behavior change.

A review of plastic waste circular actions in seven developing countries to achieve sustainable development goals

Plastic waste circularity is a priority at a global level. Sustainable development goals (SDGs) set the ways to go, and the circular economy principles underlined the 'green' strategies to be employed. However, in practice, there is still much to do, especially in developing countries, where open burning and open dumping still represent the common way of plastic waste disposal. This review aims to analyse current plastic waste circular approaches in low-middle income settings. Seven countries were selected based on the economic level and data availability from the authors, and analysed to collect and critically discuss the actions implemented at a city level. Examples of waste minimization and recycling strategies, selective collection systems and public campaigns are reported from Africa, Asia and Latin America. First, a background analysis related to physical and governance aspects of municipal solid waste management systems of the chosen settings was conducted. The assessment was focused on the treatment processes or minimization actions. Then, the applicability of the projects to achieve the SDGs was commented on. The outcomes of the research underline the need to: (1) scale up small-scale and pilot projects, (2) disseminate good practices in more low- to middle-income settings, (3) create synergies among international partners for further replications in cities. Urgent solutions to plastic waste pollution are needed. The review presented practical actions to be implemented now to boost plastic waste circularity in developing cities.

Emissions from plastic incineration induce inflammation, oxidative stress, and impaired bioenergetics in primary human respiratory epithelial cells

Inhalation exposure to plastic incineration emissions (PIEs) is a problem of increasing human relevance, as plastic production and waste creation have drastically increased since mainstream integration during the 20th century. We investigated the effects of PIEs on human nasal epithelial cells (HNECs) to understand if such exposures cause damage and dysfunction to respiratory epithelia. Primary HNECs from male and female donors were cultured at air-liquid interface (ALI), and 16HBE cells were cultured on coverslips. Smoke condensates were generated from incineration of plastic at flaming (640°C) and smoldering (500°C) temperatures, and cells were subsequently exposed to these materials at 5-50 μg/cm2 concentrations. HNECs were assessed for mitochondrial dysfunction and 16HBE cells for glutathione oxidation in real-time analyses. HNEC culture supernatants and total RNA were collected at 4-h postexposure for cytokine and gene expression analysis, and results show that PIEs can acutely induce inflammation, oxidative stress, and mitochondrial dysfunction in HNECs, and that incineration temperature modifies biological responses. Specifically, condensates from flaming and smoldering PIEs significantly increased HNEC secretion of cytokines IL-8, IL-1β, and IL-13, as well as expression of xenobiotic metabolism pathways and genes such as CYP1A1 and CYP1B1 at 5 and 20 μg/cm2 concentrations. Only 50 μg/cm2 flaming PIEs significantly increased glutathione oxidation in 16HBEs, and decreased respiration and ATP production in HNEC mitochondria. Impact Statement: Our data reveal the impact of incineration temperatures on biological outcomes associated with PIE exposures, emphasizing the importance of temperature as a factor when evaluating respiratory disease associated with PIEs exposure.

Plastic litter affected by heat or pressure: A review of current research on remoulded plastic litter

Pyroplastic, plastiglomerates, anthropogenic rocks, plasticrusts, pebble clasts, plastitar, plastisoil and anthropoquinas are examples of terms that have been used to describe the secondary products of plastic litter that have been melted, moulded, pressed, or cemented together with other plastic litter and/or minerogenic sediments or organic matter, either naturally or anthropogenically. Such processes may also favor the formation of new geological features containing plastics, such as coastal landforms or sedimentary rocks. Further research and classification of this secondary plastic litter is critical for understanding the implications of this emerging contaminant as well as to create well-targeted measures to reduce it. The literature review as presented includes 32 peer-reviewed articles published between 1997 and June 2023, all of which describe various burnt or otherwise remoulded plastic litter from around the world. Based on our review we propose a new umbrella term for the different forms of secondary plastic litter that have been modified by heat or pressure: Remoulded Plastic Litter (RPL). If accepted by the research community, important steps for future research and policy will be to implement RPL into the OSPAR protocol for monitoring and assessment of marine litter and thereby fill knowledge gaps of the geographic distribution of RPLs and their potential toxicities to nature and humans. It is clear that the distribution of RPL research spans the globe, however, studies in Africa, Oceania, large tracts of the polar regions, and terrestrial areas in general, are scarce to absent, as are ecotoxicological studies and recommendations for policy development.

Abundance and risk assessment of microplastics in water, sediment, and aquatic insects of the Nile River

Microplastics (MPs) are a serious threat in freshwater environments. The ecological risk and abundance level of MPs in abiotic and biotic compartments of the Nile River haven't been systematically reported. Thus, these issues were highlighted in the present study during different seasons of the sampling year. The results showed that MP concentrations in the river ranged from 2.24 ± 0.6 to 3.76 ± 1.1 particles/L, 298 ± 63 to 520 ± 80 particles/kg dry weight, and 0.081 ± 0.051 to 4.95 ± 2.6 particles/individual in surface water, sediment, and different species of aquatic insects, respectively. All the extracted MPs are colored blue, red, and black. Fiber-shaped polyesters (<500-1500 μm) were the most common MPs in all the river compartments. MPs' dominance was observed during the summer in comparison with that in the other seasons. Environmental risk indicators indicate the high ecological risk of MPs, which are widely distributed in the Nile River. In conclusion, MP consumption by aquatic insects may not only be related to levels of environmental contamination, since other variables, such as taxon size, weight, and particular feeding behavior, may also be significant. Additionally, the presence of MPs in insects (at lower trophic levels) creates the potential for predation-based inter-trophic level transmission. Thus, higher trophic-level investigations of various feeding groups should be carried out to identify any possible harm that MPs cause to various aquatic organisms.

Polystyrene microplastic-induced oxidative stress triggers intestinal barrier dysfunction via the NF-κB/NLRP3/IL-1β/MCLK pathway

Emerging evidence has demonstrated the association between microplastics (MPs) with a diameter of <5 mm and the risk of intestinal diseases. However, the molecular mechanisms contributing to MP-induced intestinal barrier dysfunction have not been fully appreciated. In this study, C57BL/6 J mice were exposed to polystyrene microplastics (PS-MPs, 0.2, 1 or 5 μm) at 1 mg/kg body weight daily by oral gavage for 28 days. We found that PS-MPs exposure induced oxidative stress and inflammatory cell infiltration in mice colon, leading to an increased expression of pro-inflammatory cytokine. Moreover, there were an increase in intestinal permeability and decrease in mucus secretion, accompanied by downregulation of tight junction (TJ)-related zonula occluden-1 (ZO-1), occluding (OCLN) and claudin-1 (CLDN-1) in mice colon. Especially, 5 μm PS-MPs (PS5)-induced intestinal epithelial TJ barrier damage was more severe than 0.2 μm PS-MPs (PS0.2) and 1 μm PS-MPs (PS1). In vitro experiments indicated that PS5-induced oxidative stress upregulated the expression of nuclear factor kappa B (NF-κB), nucleotide-binding domain and leucine-rich repeat protein 3 (NLRP3) inflammasome, and myosin light chain kinase (MLCK). Meanwhile, pre-treatment with the antioxidant NAC, NLRP3 inhibitor MCC950 and MLCK inhibitor ML-7 considerably reduced PS5-triggered reactive oxygen species (ROS) production and inflammatory response, inhibited the activation of the NF-κB/NLRP3/MLCK pathway, and upregulated ZO-1, OCLN and CLDN-1 expression in Caco-2 cells. Taken together, our study demonstrated that PS-MPs cause intestinal barrier dysfunction through the ROS-dependent NF-κB/NLRP3/IL-1β/MLCK pathway.

Development and validation of a GC Orbitrap-MS method for the analysis of phthalate esters (PAE) and bis(2-ethylhexyl)adipate (DEHA) in atmospheric particles and its application for screening PM2.5 from Curitiba, Brazil

Phthalates or phthalic acid esters (PAE) and bis(2-ethylhexyl)adipate (DEHA) are ubiquitous chemicals often used as plasticisers and additives in many industrial products and are classified as both persistent organic pollutants (POPs) and new emerging pollutants (NEPs). Exposure to these chemicals, especially through inhalation, is linked to a wide range of negative health effects, including endocrine disruption. Air particulate matter (PM) with an aerodynamic diameter ≤ 2.5 μm can be enriched with PAEs and DEHA and if inhaled can cause multi-system human toxicity. Therefore, proper monitoring of PAEs and DEHA in PM is required to assess human exposure to these pollutants. In this work, we developed and validated a new and sensitive gas-chromatography high-resolution mass spectrometry (GC-HRMS) method for targeted analysis of PAEs including dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate (DBP), benzyl butyl phthalate (BBP), bis(2-ethylhexyl)adipate (DEHA), bis(2-ethylhexyl)phthalate (DEHP), di-n-octyl phthalate (DOP), in PM. Analytical aspects including sample preparation steps and GC-HRMS parameters, e.g., quadrupole isolation window, to enhance method sensitivity have been assessed. The estimated limit of detection (LODs) of target PAEs and DEHA ranged from 5.5 to 17 pg μL-1, allowing their trace-level detection in PM. Extraction efficiencies of 78-101% were obtained for the target compounds. Low DMP and DEP extraction efficiencies from the spiked filter substrates indicated that significant losses of higher volatility PAEs can occur during the sample collection when filter-based techniques are used. This work is the first targeted method based on GC-Orbitrap MS for PAEs and DEHA in environmental samples. The validated method was successfully applied for the targeted analysis of PAEs and DEHA in PM2.5 samples from the eighth most populous city in Brazil, Curitiba. This work is the first to report DBP, DEHA, DEHP, and DOP in urban PM from Brazil. The observed concentrations of PAEs (up to 29 ng m-3) in PM2.5 from Curitiba may not represent the extent of pollution by these toxic compounds since the analysed samples were collected during a COVID-19 restriction when anthropogenic activities were reduced.

Depolymerization within a Circular Plastics System

The societal importance of plastics contrasts with the carelessness with which they are disposed. Their superlative properties lead to economic and environmental efficiency, but the linearity of plastics puts the climate, human health, and global ecosystems at risk. Recycling is fundamental to transitioning this linear model into a more sustainable, circular economy. Among recycling technologies, chemical depolymerization offers a route to virgin quality recycled plastics, especially when valorizing complex waste streams poorly served by mechanical methods. However, chemical depolymerization exists in a complex and interlinked system of end-of-life fates, with the complementarity of each approach key to environmental, economic, and societal sustainability. This review explores the recent progress made into the depolymerization of five commercial polymers: poly(ethylene terephthalate), polycarbonates, polyamides, aliphatic polyesters, and polyurethanes. Attention is paid not only to the catalytic technologies used to enhance depolymerization efficiencies but also to the interrelationship with other recycling technologies and to the systemic constraints imposed by a global economy. Novel polymers, designed for chemical depolymerization, are also concisely reviewed in terms of their underlying chemistry and potential for integration with current plastic systems.

Portable Pyrolysis-Point Discharge Optical Spectrometer for In Situ Plastic Polymer Identification by Coupling with Machine Learning

Rapid and in situ identification of specific polymers is a challenging and crucial step in plastic recycling. However, conventional techniques continue to exhibit significant limitations in the rapid and field classification of plastic products, especially with the wide range of commercially available color polymers because of their large size, high energy consumption, and slow and complicated analysis procedures. In this work, a simple analytical system integrating a miniature and low power consumption (22.3 W) pyrolyzer (Pyr) and a low temperature, atmospheric pressure point discharge optical emission spectrometer (μPD-OES) was fabricated for rapidly identifying polymer types. Plastic debris is decomposed in the portable pyrolyzer to yield volatile products, which are then swept into the μPD-OES instrument for monitoring the optical emission patterns of the thermal pyrolysis products. With machine learning, five extensively used raw polymers and their consumer plastics were classified with an accuracy of ≥97.8%. Furthermore, the proposed method was applied to the identification of the aged polymers and plastic samples collected from a garbage recycling station, indicating its great potential for identification of environmentally weathered plastics. This portable Pyr-μPD-OES system provides a cost-effective tool for rapid and field identification of polymer types of recycled plastic for proper management and resource recycling.

Microplastic pollution in wild and aquacultured Mediterranean mussels from the Sea of Marmara: Abundance, characteristics, and health risk estimations

Microplastic (MP) pollution raises urgent concerns about the environmental well-being and the safety of the food supply for humans. Mussels are essential filter-feeding organisms that may be highly susceptible to MPs uptake due to their global distribution and sedentary lifestyle. There is also a knowledge gap regarding MP levels in commercially-farmed and wild-sourced mussels for human consumption, creating gaps in risk identification for food safety. This study aims to fill this gap in understanding by (a) investigating the presence and abundance of MPs in both wild and aquacultured mussels collected from six different stations in the Sea of Marmara, (b) comparing the levels of MPs between aquacultured and wild mussels, and (c) evaluating the potential health risks associated with the consumption of these contaminated mussels. Polymer types were verified by ATR-FTIR (Attenuated Total Reflectance Fourier Transform- Infrared Spectroscopy), and 6 different polymers have been identified. Among the total 753 identified MPs, the majority (79.8%) were fibers, with the predominant size range (42.4%) falling between 0.1 and 0.5 mm. Consuming wild mussels was associated with a 187.6% higher risk of MP intake compared to aquaculture. A consumer can potentially be exposed to 133.11 to 844.86 MP particles when consuming a 100 g serving of mussels, with risks becoming more significant as portion sizes increase, as is the case in some countries where portions reach 225 g. In this study, detailed information is presented on MP pollution in both wild and aquacultured mussels from Sea of Marmara, providing valuable insights for ensuring food safety, effective management and control of MP pollution in this region.

Recent Advancements in Pyrolysis of Halogen-Containing Plastics for Resource Recovery and Halogen Upcycling: A State-of-the-Art Review

Plastic waste has emerged as a serious issue due to its impact on environmental degradation and resource scarcity. Plastic recycling, especially of halogen-containing plastics, presents challenges due to potential secondary pollution and lower-value implementations. Chemical recycling via pyrolysis is the most versatile and robust approach for combating plastic waste. In this Review, we present recent advancements in halogen-plastic pyrolysis for resource utilization and the potential pathways from "reducing to recycling to upcycling" halogens. We emphasize the advanced management of halogen-plastics through copyrolysis with solid wastes (waste polymers, biomass, coal, etc.), which is an efficient method for dealing with mixed wastes to obtain high-value products while reducing undesirable substances. Innovations in catalyst design and reaction configurations for catalytic pyrolysis are comprehensively evaluated. In particular, a tandem catalysis system is a promising route for halogen removal and selective conversion of targeted products. Furthermore, we propose novel insights regarding the utilization and upcycling of halogens from halogen-plastics. This includes the preparation of halogen-based sorbents for elemental mercury removal, the halogenation-vaporization process for metal recovery, and the development of halogen-doped functional materials for new materials and energy applications. The reutilization of halogens facilitates the upcycling of halogen-plastics, but many efforts are needed for mutually beneficial outcomes. Overall, future investigations in the development of copyrolysis and catalyst-driven technologies for upcycling halogen-plastics are highlighted.

Minimizing the Environmental Impacts of Plastic Pollution through Ecodesign of Products with Low Environmental Persistence

While plastic pollution threatens ecosystems and human health, the use of plastic products continues to increase. Limiting its harm requires design strategies for plastic products informed by the threats that plastics pose to the environment. Thus, we developed a sustainability metric for the ecodesign of plastic products with low environmental persistence and uncompromised performance. To do this, we integrated the environmental degradation rate of plastic into established material selection strategies, deriving material indices for environmental persistence. By comparing indices for the environmental impact of on-the-market plastics and proposed alternatives, we show that accounting for the environmental persistence of plastics in design could translate to societal benefits of hundreds of millions of dollars for a single consumer product. Our analysis identifies the materials and their properties that deserve development, adoption, and investment to create functional and less environmentally impactful plastic products.

Photo-oxidation of Micro- and Nanoplastics: Physical, Chemical, and Biological Effects in Environments

Micro- and nanoplastics (MNPs) are attracting increasing attention due to their persistence and potential ecological risks. This review critically summarizes the effects of photo-oxidation on the physical, chemical, and biological behaviors of MNPs in aquatic and terrestrial environments. The core of this paper explores how photo-oxidation-induced surface property changes in MNPs affect their adsorption toward contaminants, the stability and mobility of MNPs in water and porous media, as well as the transport of pollutants such as organic pollutants (OPs) and heavy metals (HMs). It then reviews the photochemical processes of MNPs with coexisting constituents, highlighting critical factors affecting the photo-oxidation of MNPs, and the contribution of MNPs to the phototransformation of other contaminants. The distinct biological effects and mechanism of aged MNPs are pointed out, in terms of the toxicity to aquatic organisms, biofilm formation, planktonic microbial growth, and soil and sediment microbial community and function. Furthermore, the research gaps and perspectives are put forward, regarding the underlying interaction mechanisms of MNPs with coexisting natural constituents and pollutants under photo-oxidation conditions, the combined effects of photo-oxidation and natural constituents on the fate of MNPs, and the microbiological effect of photoaged MNPs, especially the biotransformation of pollutants.

The Open Burning of Plastic Wastes is an Urgent Global Health Issue

The open burning of mixed wastes that contain plastics is a widespread practice across the globe, resulting in the release of gas emissions and ash residues that have toxic effects on human and environmental health. Although plastic pollution is under scrutiny as a pressing environmental concern, it is often conflated with plastic litter, and the contribution of the open burning of plastics to air, soil, and water pollution gets overlooked. Therefore, campaigns to raise awareness about plastic pollution often end up leading to increased open burning. Many countries or regions where open burning is prevalent have laws in place against the practice, but these are seldom effective. In this viewpoint, we direct attention to this critical but largely overlooked dimension of plastic pollution as an urgent global health issue. We also advocate interventions to raise awareness about the risks of open burning and emphasize the necessity of phasing out some particularly pernicious plastics in high-churn, single-use consumer applications.

Heavy metal migration regimes in the production of syngas from solid waste by thermal plasma treatment

In recent years, thermal plasma technology has been widely used in the harmless and resource-efficient treatment of solid waste (SW). This study investigates the migration behaviors of heavy metals during the thermal plasma treats SW to obtain the interphase structure change regimes of heavy metals. The transformation of SW under high-temperature environments was analyzed by Fluent simulation, and the composition of the crystalline phases and heavy metal content of the post-treatment slags were studied through a combination of XRD, SEM, and heavy metal leaching experiments. The results show that the thermal plasma provides a melting zone temperature of more than 4000 K, and the treated slag is mostly an amorphous solid composed of glassy Si-O mesh, which effectively encapsulates heavy metals and reduces their leaching rate. Additional analysis of the migration and transformation of heavy metals during thermal plasma treatment revealed that solid-phase heavy metals primarily took the form of sulphides and sulphates, while liquid- and gas-phase heavy metals were mostly oxides and chlorides. Simultaneously, Economic analysis results showed that the thermal plasma treats SW economically with an Energetic efficiency of up to 76.7%. The results of this study providing new insights into thermal plasma treatment SW research.

Estimating personal exposures to household air pollution and plastic garbage burning among adolescent girls in Jalapa, Guatemala

Waste collection services are uncommon in rural areas of low-resource countries, causing waste accumulation and subsequent dumping and burning of garbage. Air pollution from household garbage burning, including plastics, has been observed in Jalapa, Guatemala in addition to household air pollution (HAP) from cooking. Adolescent girls often help with these cooking and household tasks, but little is known about their exposures. We characterized 24-h exposures to HAP and household garbage burning in adolescent girls by measuring fine particulate matter (PM2.5), black carbon (BC), urinary biomarkers of polycyclic aromatic hydrocarbons (PAHs), bisphenol A (BPA), and phthalates. We recruited 60 girls between 13 and 17 years of age who helped with cooking activities and lived with participants of the Household Air Pollution Intervention Network (HAPIN) trial. We recruited n = 30 girls each from the control (wood-burning stove) and intervention (liquefied petroleum gas stove) arms. We also measured real-time kitchen concentrations of BC in 20 homes (33%). PM2.5 and BC were measured in n = 21 control and n = 20 intervention participants. Median concentrations of personal PM2.5 and BC and kitchen BC were lower (p < 0.05) in the intervention arm by 87%, 80%, and 85%, respectively. PAH metabolite concentrations were lower (p < 0.001) for all nine metabolites in intervention (n = 26) compared to control participants (n = 29). Urinary BPA concentrations were 66% higher in participants who reported using cosmetics (p = 0.02), and phthalate concentrations were 63% higher in participants who had reported using hair products during the sample period (p = 0.05). Our results suggest that gas stoves can reduce HAP exposures among adolescents who are not primary cooks at home. Biomarkers of plastic exposure were not associated with intervention status, but some were elevated compared to age- and sex-matched participants of the National Health and Nutrition Examination Survey (NHANES).

Learning from the past to plan for the future: An historical review of the evolution of waste and resource management 1970-2020 and reflections on priorities 2020-2030 - The perspective of an involved witness

Improving waste and resource management (WaRM) around the world can halve the weight of plastics entering the oceans, significantly mitigate global heating and contribute directly to 12 of 17 sustainable development goals (SDGs). Achieving such results demands understanding and learning from historical evolution of WaRM. The baseline is 1970, prior to environmental legislation. Early steps in the Global North focused on the 'technical fix' within strictly enforced legal frameworks, first bringing hazardous wastes and municipal solid wastes (MSW) under control, then gradually ramping up environmental standards. Using modern technologies to the Global South often failed due to institutional and financial constraints. From 1990, focus switched to integrating technical and governance aspects: local institutional coherence, financial sustainability, provider inclusivity, user inclusivity, national legislative and policy framework. The Global North rediscovered recycling, using policy measures to promote segregation at source; this relied on new markets in emerging economies, which had largely disappeared by 2020. The Global South is making progress on bringing wastes under control, but around 2.7 billion people lack access to waste collection, while ~40% of collected MSW is open dumped or burned - a continuing global waste emergency. So, much remains to be done to move further towards a circular economy. Three policy priorities are critical for all countries: access to sustainable financing, rethinking sustainable recycling and worldwide extended producer responsibility with teeth. Extending services to unserved communities (SDG11.6.1) requires a people-centred approach, working with communities to provide both quality services and decent livelihoods for collection and recycling workers.

Assessing the bioavailability of black carbon-derived dissolved organic matter for marine heterotrophic prokaryotes

Here we investigated the bioavailability of black carbon (BC)-derived dissolved organic matter (DOM) for a natural mixed community of marine heterotrophic prokaryotes. We ran an in vitro biodegradation experiment that took place over 3 months and exposed a community of organisms collected in the northwestern Mediterranean Sea (Bay of Marseille, France) to three different soluble fractions of BC prepared in the laboratory from various fossil fuel combustion particulates: standard diesel (DREF), oxidized diesel (DREF-OX), and natural samples of ship soot (DSHIP). Over the course of the three months, we observed significant decreases in the concentrations of dissolved organic carbon (DOC; from 9 to 21 %), dissolved BC (DBC; from 22 to 38 %) and dissolved polycyclic aromatic hydrocarbons (d-PAH; from 24 to 64 %) along with variability in the growth dynamics and activity of the heterotrophic prokaryotic community. The heterotrophic prokaryotic community exposed to DREF-OX treatment showed the highest values of respiration and production and the highest cell abundance, associated with the highest decrease in DOC (21 %) and d-PAH (64 %) concentrations. In the DREF and DSHIP treatments, prokaryotic activity was oriented towards anabolism. DREF treatment led to the highest decrease in DBC concentration (38 %). DSHIP treatment, which presented a substantially different d-PAH and dissolved metals content to the other two treatments, showed the lowest decreases in DOC, DBC and d-PAH concentrations, as well as the lowest prokaryotic activity and biomasses. Our results indicate that BC-derived DOM, including the most condensed fraction of this material, is partly bioavailable and therefore likely to be assimilated by marine prokaryotes. The origin of BC/soot deposited at the ocean surface turns out to be a key parameter that dictates the efficiency of biodegradation of its dissolved fraction by heterotrophic prokaryotes.

U.S. plastic waste exports: A state-by-state analysis pre- and post-China import ban

This study analyzes the regional implications of China's 2017 import ban on plastic waste by examining U.S. census data. A statistically significant decrease in total U.S. plastic waste exports was found, dropping from about 1.4 million tons to 0.6 million tons in the post-ban period. California remained the top exporter, throughout both pre- and post-ban periods, while South Carolina exhibited the highest per capita exports. Malaysia emerged as the largest importer of U.S. plastic waste, followed by Vietnam, Indonesia, and Thailand. The ban also led to a change in the composition of the exported plastic waste. Ethylene polymers increased from 32.6% of total exports in the pre-ban period to 46.9% in the post-ban period. Other plastics (vinyl chloride polymers, styrene polymers, and for plastics not elsewhere specified or included) decreased from 67.4% of total exports in the pre-ban period to 53.1% in the post-ban period. Moreover, we found that exporting plastic waste has significant environmental and human health impacts. For example, the Global Warming Potential (GWP) decreased from 20 million tons CO2-eq in the scenario where 100% of plastics are exported, or 25 million tons exported from the U.S. since 2002, to -11.1 million tons CO2-eq in the scenario where 100% of plastics are treated domestically. Transportation exacerbates these impacts for exported waste scenarios, increasing to 5.4 million tons CO2-eq when plastics are exported by ship while decreasing to 0.9 million tons CO2-eq for domestic treatment. Although exporting plastic waste is initially cost-effective, our study highlights that investing in domestic waste management can yield significant long-term benefits, considering the environmental and public health impacts. Therefore, it is crucial to prioritize context-specific solutions to address the challenges of the evolving global plastic waste landscape.

Fire and Oil Led to Complex Mixtures of PAHs on Burnt and Unburnt Plastic during the M/V X-Press Pearl Disaster

In May 2021, the M/V X-Press Pearl container ship burned for 2 weeks, leading to the largest maritime spill of resin pellets (nurdles). The disaster was exacerbated by the leakage of other cargo and the ship's underway fuel. This disaster affords the unique opportunity to study a time-stamped, geolocated release of plastic under real-world conditions. Field samples collected from beaches in Sri Lanka nearest to the ship comprised nurdles exposed to heat and combustion, burnt plastic pieces (pyroplastic), and oil-plastic agglomerates (petroplastic). An unresolved question is whether the 1600+ tons of spilled and recovered plastic should be considered hazardous waste. Due to the known formation and toxicity of combustion-derived polycyclic aromatic hydrocarbons (PAHs), we measured 20 parent and 21 alkylated PAHs associated with several types of spilled plastic. The maximum PAH content of the sampled pyroplastic had the greatest amount of PAHs recorded for marine plastic debris (199,000 ng/g). In contrast, the sampled unburnt white nurdles had two orders of magnitude less PAH content. The PAH composition varied between the types of spilled plastic and presented features typical of and conflicting with petrogenic and pyrogenic sources. Nevertheless, specific markers and compositional changes for burning plastics were identified, revealing that the fire was the main source of PAHs. Eight months after the spill, the PAH contents of sampled stray nurdles and pyroplastic were reduced by more than 50%. Due to their PAH content exceeding levels allowable for plastic consumer goods, classifying burnt plastic as hazardous waste may be warranted. Following a largely successful cleanup, we recommend that the Sri Lankans re-evaluate the identification, handling, and disposal of the plastic debris collected from beaches and the potential exposure of responders and the public to PAHs from handling it. The maritime disaster underscores pyroplastic as a type of plastic pollution that has yet to be fully explored, despite the pervasiveness of intentional and unintentional burning of plastic globally.

Soil contamination by trace metals and assessment of the risks associated: the dumping site of Safi city (Northwest Morocco)

The main objective of this work was to determine the soil contamination with trace metals within and around the dumpsite of Safi city (Morocco) and to evaluate the potential environmental risk associated. The results showed that the average soil concentrations of trace metals had the following order: Fe > Zn > Cu > Cr > Cd and exceeded the world and the upper continental background concentrations except for Fe. In addition, the concentrations of Zn, Cu, and Cd remained beyond the limit standards given by the WHO/FAO. Geoaccumulation index, enrichment factor, and pollution load index (PLI) indicated that the dumpsite soil is highly contaminated and deteriorated, presenting evidence of high ecological risk proved by the values of the potential ecological risk index (PERI). Correlation analyses revealed a strong relationship between the organic matter & [Fe, Zn, Cr, Cd], calcium carbonates & [Zn, Cr], and Cr & Cu inside the dumpsite soil. Principal component analysis confirmed the temporal and spatial classification of Zone A as the oldest and Zone C as the youngest and indicated that the regrouped trace metals could have the same behavior and or the same origin. The interpolation of trace metals concentrations and PERI revealed a plausible extension outside the landfill, confirmed by PLI values.

Applicability of the Life Cycle Assessment Model in Solid Waste Management in Zimbabwe

Solid waste increase is inevitable globally due to anthropogenic activities. This adds burden to waste management systems in developing countries including Zimbabwe. Currently, life cycle assessment (LCA) model is used to achieve sustainability and circular economy (CE) in solid waste management. Therefore, the main goal of this paper was to unearth LCA model applicability in solid waste management in Zimbabwe. Data sources were retrieved from databases like Scopus, ScienceDirect and Springer, although government documents were also used. In Zimbabwe, organic and inorganic solid waste is generated from various sources, namely industries, institutions and households. Solid waste management in Zimbabwe is based on traditional linear approach where waste is collected and disposed through landfilling, burning, incineration, burying, open pits or illegally. Most disposal approaches occupy base of waste management pyramid, hence posing detrimental impacts to human health, terrestrial, aquatic and atmospheric ecosystems. Management approaches are far from Agenda 21, Sustainable Development Goals (SDGs), Zimbabwe Vision 2030 and National Development Strategy 1 demands. Literature revealed that LCA model can be utilised to achieve sustainable solid waste management in countries like Zimbabwe. LCA model is essential in management of solid waste in Zimbabwe, since it assists decision makers in selecting management approaches with less environmental health impacts. Moreover, LCA enables application of waste material reuse, recycle, repairing and recovery, thus narrowing the gap to achieve CE and economic growth in Zimbabwe. Owing to LCA model implementation of waste management legislation and policies which support energy recovery and circular economy became easier in Zimbabwe.

Open defaecation by proxy: Tackling the increase of disposable diapers in waste piles in informal settlements

Disposable diapers are becoming increasingly popular and present an emerging challenge for global waste management, particularly within LMICs. They offer a cheap and convenient way for caregivers to manage child excreta; however, insufficient understanding of safe disposal methods, combined with limited access to waste management services results in hazardous disposal. Used diapers are being increasingly found dumped in the open environment, including in water bodies and in open fields, leading to faecal contamination of the environment and an enhanced risk of transmission of faecal-oral diseases such as cholera and typhoid. United Nations SDG 6 aims to end open defaecation globally by 2030; however, improper disposal of used diapers will hamper progress towards reaching this goal. In this review, we identify current trends in use and subsequent disposal of single use disposable diapers in LMICs, and critically discuss the environmental and public health impacts of current practices, and potential solutions to address these challenges. Contemporary methods for managing the disposal of single use diapers for communities in LMICs tend to be cost prohibitive with few alternative options other than dumping in the environment. Modern cloth diapers offer a low waste alternative to disposable diapers but often carry an unaffordable high upfront cost. Here, in addition to advocating improved efforts by governments to upgrade access and quality of waste management services, we recommend the design and implementation of intervention schemes aimed to increase awareness of safe and hygienic disposal practices for disposable diapers.

Ecotoxicity of PM10 emissions generated during controlled burning of waste PET

Domestic waste is often burned either as fuel for winter heating or in open areas, simply to get rid of waste. Polyethylene terephthalate (PET) represents an important component of plastics usage as well as of plastic waste produced. While most studies attempt to characterize environmental risk of open burning of mixed household waste, present work evaluates chemical and ecotoxicological parameters of particulate matter (PM) produced during controlled burning of PET samples. In the PM₁₀ samples, polycyclic aromatic hydrocarbon and heavy metal concentrations were measured, ecotoxicity was evaluated using the kinetic Vibrio fischeri bioassay. Both chemical composition and ecotoxicity of the 4 samples showed significant correlation, regardless of the colored or colorless nature of the original PET sample. Antimony was found in considerable concentrations, in the range of 6.93-16.9 mg/kg. PAHs profiles of the samples were very similar, showing the dominance of 4-and 5-ring PAHs, including carcinogenic benzo(a)pyrene.

The Minderoo-Monaco Commission on Plastics and Human Health

Background

Plastics have conveyed great benefits to humanity and made possible some of the most significant advances of modern civilization in fields as diverse as medicine, electronics, aerospace, construction, food packaging, and sports. It is now clear, however, that plastics are also responsible for significant harms to human health, the economy, and the earth's environment. These harms occur at every stage of the plastic life cycle, from extraction of the coal, oil, and gas that are its main feedstocks through to ultimate disposal into the environment. The extent of these harms not been systematically assessed, their magnitude not fully quantified, and their economic costs not comprehensively counted.

Goals

The goals of this Minderoo-Monaco Commission on Plastics and Human Health are to comprehensively examine plastics' impacts across their life cycle on: (1) human health and well-being; (2) the global environment, especially the ocean; (3) the economy; and (4) vulnerable populations-the poor, minorities, and the world's children. On the basis of this examination, the Commission offers science-based recommendations designed to support development of a Global Plastics Treaty, protect human health, and save lives.

Report Structure

This Commission report contains seven Sections. Following an Introduction, Section 2 presents a narrative review of the processes involved in plastic production, use, and disposal and notes the hazards to human health and the environment associated with each of these stages. Section 3 describes plastics' impacts on the ocean and notes the potential for plastic in the ocean to enter the marine food web and result in human exposure. Section 4 details plastics' impacts on human health. Section 5 presents a first-order estimate of plastics' health-related economic costs. Section 6 examines the intersection between plastic, social inequity, and environmental injustice. Section 7 presents the Commission's findings and recommendations.

Plastics

Plastics are complex, highly heterogeneous, synthetic chemical materials. Over 98% of plastics are produced from fossil carbon- coal, oil and gas. Plastics are comprised of a carbon-based polymer backbone and thousands of additional chemicals that are incorporated into polymers to convey specific properties such as color, flexibility, stability, water repellence, flame retardation, and ultraviolet resistance. Many of these added chemicals are highly toxic. They include carcinogens, neurotoxicants and endocrine disruptors such as phthalates, bisphenols, per- and poly-fluoroalkyl substances (PFAS), brominated flame retardants, and organophosphate flame retardants. They are integral components of plastic and are responsible for many of plastics' harms to human health and the environment.Global plastic production has increased almost exponentially since World War II, and in this time more than 8,300 megatons (Mt) of plastic have been manufactured. Annual production volume has grown from under 2 Mt in 1950 to 460 Mt in 2019, a 230-fold increase, and is on track to triple by 2060. More than half of all plastic ever made has been produced since 2002. Single-use plastics account for 35-40% of current plastic production and represent the most rapidly growing segment of plastic manufacture.Explosive recent growth in plastics production reflects a deliberate pivot by the integrated multinational fossil-carbon corporations that produce coal, oil and gas and that also manufacture plastics. These corporations are reducing their production of fossil fuels and increasing plastics manufacture. The two principal factors responsible for this pivot are decreasing global demand for carbon-based fuels due to increases in 'green' energy, and massive expansion of oil and gas production due to fracking.Plastic manufacture is energy-intensive and contributes significantly to climate change. At present, plastic production is responsible for an estimated 3.7% of global greenhouse gas emissions, more than the contribution of Brazil. This fraction is projected to increase to 4.5% by 2060 if current trends continue unchecked.

Plastic Life Cycle

The plastic life cycle has three phases: production, use, and disposal. In production, carbon feedstocks-coal, gas, and oil-are transformed through energy-intensive, catalytic processes into a vast array of products. Plastic use occurs in every aspect of modern life and results in widespread human exposure to the chemicals contained in plastic. Single-use plastics constitute the largest portion of current use, followed by synthetic fibers and construction.Plastic disposal is highly inefficient, with recovery and recycling rates below 10% globally. The result is that an estimated 22 Mt of plastic waste enters the environment each year, much of it single-use plastic and are added to the more than 6 gigatons of plastic waste that have accumulated since 1950. Strategies for disposal of plastic waste include controlled and uncontrolled landfilling, open burning, thermal conversion, and export. Vast quantities of plastic waste are exported each year from high-income to low-income countries, where it accumulates in landfills, pollutes air and water, degrades vital ecosystems, befouls beaches and estuaries, and harms human health-environmental injustice on a global scale. Plastic-laden e-waste is particularly problematic.

Environmental Findings

Plastics and plastic-associated chemicals are responsible for widespread pollution. They contaminate aquatic (marine and freshwater), terrestrial, and atmospheric environments globally. The ocean is the ultimate destination for much plastic, and plastics are found throughout the ocean, including coastal regions, the sea surface, the deep sea, and polar sea ice. Many plastics appear to resist breakdown in the ocean and could persist in the global environment for decades. Macro- and micro-plastic particles have been identified in hundreds of marine species in all major taxa, including species consumed by humans. Trophic transfer of microplastic particles and the chemicals within them has been demonstrated. Although microplastic particles themselves (>10 µm) appear not to undergo biomagnification, hydrophobic plastic-associated chemicals bioaccumulate in marine animals and biomagnify in marine food webs. The amounts and fates of smaller microplastic and nanoplastic particles (MNPs <10 µm) in aquatic environments are poorly understood, but the potential for harm is worrying given their mobility in biological systems. Adverse environmental impacts of plastic pollution occur at multiple levels from molecular and biochemical to population and ecosystem. MNP contamination of seafood results in direct, though not well quantified, human exposure to plastics and plastic-associated chemicals. Marine plastic pollution endangers the ocean ecosystems upon which all humanity depends for food, oxygen, livelihood, and well-being.

Human Health Findings

Coal miners, oil workers and gas field workers who extract fossil carbon feedstocks for plastic production suffer increased mortality from traumatic injury, coal workers' pneumoconiosis, silicosis, cardiovascular disease, chronic obstructive pulmonary disease, and lung cancer. Plastic production workers are at increased risk of leukemia, lymphoma, hepatic angiosarcoma, brain cancer, breast cancer, mesothelioma, neurotoxic injury, and decreased fertility. Workers producing plastic textiles die of bladder cancer, lung cancer, mesothelioma, and interstitial lung disease at increased rates. Plastic recycling workers have increased rates of cardiovascular disease, toxic metal poisoning, neuropathy, and lung cancer. Residents of "fenceline" communities adjacent to plastic production and waste disposal sites experience increased risks of premature birth, low birth weight, asthma, childhood leukemia, cardiovascular disease, chronic obstructive pulmonary disease, and lung cancer.During use and also in disposal, plastics release toxic chemicals including additives and residual monomers into the environment and into people. National biomonitoring surveys in the USA document population-wide exposures to these chemicals. Plastic additives disrupt endocrine function and increase risk for premature births, neurodevelopmental disorders, male reproductive birth defects, infertility, obesity, cardiovascular disease, renal disease, and cancers. Chemical-laden MNPs formed through the environmental degradation of plastic waste can enter living organisms, including humans. Emerging, albeit still incomplete evidence indicates that MNPs may cause toxicity due to their physical and toxicological effects as well as by acting as vectors that transport toxic chemicals and bacterial pathogens into tissues and cells.Infants in the womb and young children are two populations at particularly high risk of plastic-related health effects. Because of the exquisite sensitivity of early development to hazardous chemicals and children's unique patterns of exposure, plastic-associated exposures are linked to increased risks of prematurity, stillbirth, low birth weight, birth defects of the reproductive organs, neurodevelopmental impairment, impaired lung growth, and childhood cancer. Early-life exposures to plastic-associated chemicals also increase the risk of multiple non-communicable diseases later in life.

Economic Findings

Plastic's harms to human health result in significant economic costs. We estimate that in 2015 the health-related costs of plastic production exceeded $250 billion (2015 Int$) globally, and that in the USA alone the health costs of disease and disability caused by the plastic-associated chemicals PBDE, BPA and DEHP exceeded $920 billion (2015 Int$). Plastic production results in greenhouse gas (GHG) emissions equivalent to 1.96 gigatons of carbon dioxide (CO2e) annually. Using the US Environmental Protection Agency's (EPA) social cost of carbon metric, we estimate the annual costs of these GHG emissions to be $341 billion (2015 Int$).These costs, large as they are, almost certainly underestimate the full economic losses resulting from plastics' negative impacts on human health and the global environment. All of plastics' economic costs-and also its social costs-are externalized by the petrochemical and plastic manufacturing industry and are borne by citizens, taxpayers, and governments in countries around the world without compensation.

Social Justice Findings

The adverse effects of plastics and plastic pollution on human health, the economy and the environment are not evenly distributed. They disproportionately affect poor, disempowered, and marginalized populations such as workers, racial and ethnic minorities, "fenceline" communities, Indigenous groups, women, and children, all of whom had little to do with creating the current plastics crisis and lack the political influence or the resources to address it. Plastics' harmful impacts across its life cycle are most keenly felt in the Global South, in small island states, and in disenfranchised areas in the Global North. Social and environmental justice (SEJ) principles require reversal of these inequitable burdens to ensure that no group bears a disproportionate share of plastics' negative impacts and that those who benefit economically from plastic bear their fair share of its currently externalized costs.

Conclusions

It is now clear that current patterns of plastic production, use, and disposal are not sustainable and are responsible for significant harms to human health, the environment, and the economy as well as for deep societal injustices.The main driver of these worsening harms is an almost exponential and still accelerating increase in global plastic production. Plastics' harms are further magnified by low rates of recovery and recycling and by the long persistence of plastic waste in the environment.The thousands of chemicals in plastics-monomers, additives, processing agents, and non-intentionally added substances-include amongst their number known human carcinogens, endocrine disruptors, neurotoxicants, and persistent organic pollutants. These chemicals are responsible for many of plastics' known harms to human and planetary health. The chemicals leach out of plastics, enter the environment, cause pollution, and result in human exposure and disease. All efforts to reduce plastics' hazards must address the hazards of plastic-associated chemicals.

Recommendations

To protect human and planetary health, especially the health of vulnerable and at-risk populations, and put the world on track to end plastic pollution by 2040, this Commission supports urgent adoption by the world's nations of a strong and comprehensive Global Plastics Treaty in accord with the mandate set forth in the March 2022 resolution of the United Nations Environment Assembly (UNEA).International measures such as a Global Plastics Treaty are needed to curb plastic production and pollution, because the harms to human health and the environment caused by plastics, plastic-associated chemicals and plastic waste transcend national boundaries, are planetary in their scale, and have disproportionate impacts on the health and well-being of people in the world's poorest nations. Effective implementation of the Global Plastics Treaty will require that international action be coordinated and complemented by interventions at the national, regional, and local levels.This Commission urges that a cap on global plastic production with targets, timetables, and national contributions be a central provision of the Global Plastics Treaty. We recommend inclusion of the following additional provisions:The Treaty needs to extend beyond microplastics and marine litter to include all of the many thousands of chemicals incorporated into plastics.The Treaty needs to include a provision banning or severely restricting manufacture and use of unnecessary, avoidable, and problematic plastic items, especially single-use items such as manufactured plastic microbeads.The Treaty needs to include requirements on extended producer responsibility (EPR) that make fossil carbon producers, plastic producers, and the manufacturers of plastic products legally and financially responsible for the safety and end-of-life management of all the materials they produce and sell.The Treaty needs to mandate reductions in the chemical complexity of plastic products; health-protective standards for plastics and plastic additives; a requirement for use of sustainable non-toxic materials; full disclosure of all components; and traceability of components. International cooperation will be essential to implementing and enforcing these standards.The Treaty needs to include SEJ remedies at each stage of the plastic life cycle designed to fill gaps in community knowledge and advance both distributional and procedural equity.This Commission encourages inclusion in the Global Plastic Treaty of a provision calling for exploration of listing at least some plastic polymers as persistent organic pollutants (POPs) under the Stockholm Convention.This Commission encourages a strong interface between the Global Plastics Treaty and the Basel and London Conventions to enhance management of hazardous plastic waste and slow current massive exports of plastic waste into the world's least-developed countries.This Commission recommends the creation of a Permanent Science Policy Advisory Body to guide the Treaty's implementation. The main priorities of this Body would be to guide Member States and other stakeholders in evaluating which solutions are most effective in reducing plastic consumption, enhancing plastic waste recovery and recycling, and curbing the generation of plastic waste. This Body could also assess trade-offs among these solutions and evaluate safer alternatives to current plastics. It could monitor the transnational export of plastic waste. It could coordinate robust oceanic-, land-, and air-based MNP monitoring programs.This Commission recommends urgent investment by national governments in research into solutions to the global plastic crisis. This research will need to determine which solutions are most effective and cost-effective in the context of particular countries and assess the risks and benefits of proposed solutions. Oceanographic and environmental research is needed to better measure concentrations and impacts of plastics <10 µm and understand their distribution and fate in the global environment. Biomedical research is needed to elucidate the human health impacts of plastics, especially MNPs.

Summary

This Commission finds that plastics are both a boon to humanity and a stealth threat to human and planetary health. Plastics convey enormous benefits, but current linear patterns of plastic production, use, and disposal that pay little attention to sustainable design or safe materials and a near absence of recovery, reuse, and recycling are responsible for grave harms to health, widespread environmental damage, great economic costs, and deep societal injustices. These harms are rapidly worsening.While there remain gaps in knowledge about plastics' harms and uncertainties about their full magnitude, the evidence available today demonstrates unequivocally that these impacts are great and that they will increase in severity in the absence of urgent and effective intervention at global scale. Manufacture and use of essential plastics may continue. However, reckless increases in plastic production, and especially increases in the manufacture of an ever-increasing array of unnecessary single-use plastic products, need to be curbed.Global intervention against the plastic crisis is needed now because the costs of failure to act will be immense.

Base- or acid-assisted polystyrene plastic degradation in supercritical CO2

Plastic has caused serious "white pollution" to the environment, and the highly inert characteristics of plastic bring a major challenge for degradation. Supercritical fluids have unique physical properties and have been widely used in various fields. In this work, supercritical CO2 (Sc-CO2) with mild conditions was selected and assisted by NaOH/HCl solution to degrade polystyrene (PS) plastic, and the reaction model was designed using response surface methodology (RSM). It was found that, regardless of the types of assistance solutions, the factors affecting PS degradation efficiencies were reaction temperature, reaction time, and NaOH/HCl concentration. At the temperature of 400 °C, time of 120 min, and base/acid concentration of 5% (in weight), 0.15 g PS produced 126.88/116.99±5 mL of gases with 74.18/62.78±5 mL of H2, and consumed 81.2/71.5±5 mL of CO2. Sc-CO2 created a homogeneous environment, which made PS highly dispersed and uniformly heated, thus promoting the degradation of PS. Moreover, Sc-CO2 also reacted with the degradation products to produce new CO and more CH4 and C2Hx (x=4, 6). Adding NaOH/HCl solution not only improved the solubility of PS in Sc-CO2, but also provided a base/acid environment that reduced the activation energy of the reaction, and effectively improved the degradation efficiencies of PS. In short, degrading PS in Sc-CO2 is feasible, and better results are obtained with the assistance of base/acid solution, which can provide a reference for the disposal of waste plastics in the future.

Supplementary Information

The online version contains supplementary material available at 10.1007/s42768-023-00139-1.

Plastic waste reprocessing for circular economy: A systematic scoping review of risks to occupational and public health from legacy substances and extrusion

The global plastics reprocessing sector is likely expand as the circular economy becomes more established and efforts to curb plastic pollution increase. Via a critical systematic scoping review (PRISMA-ScR), we focused on two critical challenges for occupational and public health that will require consideration along with this expansion: (1) Legacy contamination in secondary plastics, addressing the risk of materials and substances being inherited from the previous use and carried (circulated or transferred) through into new products when reprocessed material enters its subsequent use phase (recycled, secondary plastic); and, (2) Extrusion of secondary plastics during the final stage of conventional mechanical reprocessing. Based on selected literature, we semi-quantitatively assessed nine risk scenarios and ranked them according to the comparative magnitude of risk to human health. Our analysis highlights that despite stringent regulation, industrial diligence and enforcement, occasionally small amounts of potentially hazardous substances contained in waste plastics are able to pass through established safeguards and re-enter (cascade into) the next use phase (product cycle) after being recycled. Although many of these 'inherited' chemical substances are present at concentrations unlikely to pose a serious and imminent threat, their existence may indicate a wider or possible increase in pollution dispersion. Our assessment indicates that the highest risk results from exposure to these substances during extrusion by mechanical reprocessors in contexts where only passive ventilation, dilution and dispersion are used as control measures. Our work sets the basis to inform improved future risk management protocols for a non-polluting circular economy for plastics.

Plastic waste generation and emissions from the domestic open burning of plastic waste in Guatemala

Domestic, or household-level, open burning of plastic waste is a source of air pollutants and greenhouse gases that are often neglected in emission inventories. Domestic open burning is a considerable concern in Guatemala due to the lack of access to waste collection services, particularly in rural areas. This paper offers the first attempt to estimate emissions from the domestic open burning of waste at the city and departmental levels in Guatemala. Data were collected from the Xalapán region of Jalapa, Guatemala and analyzed to determine the change in plastic waste generation over time as well as the socioeconomic factors that may affect the extent of plastic waste generation and burning. The annual per capita masses of plastic waste burned were used to estimate emissions from domestic open burning of plastic waste in the region of Xalapán, the cities of Jutiapa and Guatemala city, and all 22 departments in Guatemala. Our results show that rural areas burn more waste domestically, likely because of a lack of access to waste collection, and 30.4% of OC, 24.0% of BC, 23.6% of PM2.5, and 2.4% of CO2 emissions in Guatemala may not be accounted for by excluding open plastic burning as a source.