Polymeric Nanoparticles as a Metolachlor Carrier: Water-Based Formulation for Hydrophobic Pesticides and Absorption by Plants

N-succinyl-chitosan as ecofriendly pesticide carriers: Nano encapsulation and synergistic antifungal effect on 4-hydroxyphenyl-2-propenyl-1-one derivatives based on chalcone structure

INTRODUCTION

Traditional pesticides have poor-water solubility, high toxicity and low bioavailability. Therefore, it is of great significance for the sustainable and healthy development of the pesticide industry to develop efficient and ecofriendly new chemical pesticide products and formulations.

OBJECTIVES

This study aims to synthesize a series of derivatives based on chalcone structure (HPPO), and then use the amphiphilic and self-assembly characteristics of N-succinyl-chitosan (NSCS) to prepare HPPO@NSCS nanoparticles (HPPO@NSCS NPs) in order to realize the green application of HPPO, and investigate the antifungal activity and mechanisms of HPPO@NSCS NPs.

METHODS

NSCS was synthesized by structural modification using chitosan as the carrier. Based on its amphiphilic and self-assembly characteristics, HPPO-16@NSCS NPs were reasonably prepared by combining with active small molecule HPPO-16. Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), dynamic light scattering (DLS), fluorescence spectroscopy (FS) and high-performance liquid chromatography (HPLC) were used to characterize the physicochemical properties of NSCS and HPPO-16@NSCS NPs. The inhibitory activity of nanopesticides against Rhizoctonia solani (R. solani) was tested in vivo and in vitro. The mechanism of antifungal action was discussed from the observation of pathogen morphology, fluorescence staining and enzyme activity determination.

RESULTS

28 small molecules based on chalcone structure (HPPO-1-28), NSCS and HPPO-16@NSCS were successfully synthesized. The application of HPPO-16@NSCS could impair the development, cell structure, cellular energy utilization, and metabolism pathways of the fungi. The protective effects of HPPO-16@NSCS NPs on rice leaves and leaf sheaths were 80.9 and 76.1 %, respectively, which were better than those of azoxystrobin.

CONCLUSION

This study reveals that these simple chalcone derivatives can be further explored as viable antibacterial alternatives and NSCS as a novel pesticide matrix can be used for the delivery of more insoluble pesticides.

The nano-paradox: addressing nanotoxicity for sustainable agriculture, circular economy and SDGs

Engineered nanomaterials (ENMs) have aroused extensive interest in agricultural, industrial, and medical applications. The integration of ENMs into the agricultural systems aligns with the principles of United Nations' sustainable development goals (SDGs), circular economy (CE) and bio-economy (BE) principles. This approach offers excellent opportunities to enhance productivity and address global climate change challenges. The revelation of the adverse effects of nanomaterials (NMs) on various organisms and ecosystems, however, has fueled the debate on 'Nano-paradox' leading to emergence of a new research domain 'Nanotoxicology'. ENMs have shown different interactions with biological and environmental systems as compared to their bulk counterparts. They bioaccumulate in organisms, soils, and other environmental matrices, move through food chains and reach higher trophic levels including humans ultimately resulting in oxidative stress and cellular damage. Understanding nano-bio interactions, the mechanism of gene- and cytotoxicity, and associated potential hazards, is therefore, essential to mitigate their toxicological outputs. This review comprehensively examines the cyto- and genotoxicity mechanisms of ENMs in biological systems, covering aspects such as their entry, uptake, cellular responses, dynamic interactions in biological environments their long-term effects and environmental risk assessment (ERA). It also discusses toxicological assessment methods, regulatory policies, strategies for toxicity management/mitigation and future research directions in nanotechnology, all within the context of SDGs, CE, promoting resource efficiency and sustainability. Navigating the nano-paradox involves balancing the benefits of nanomaterials with concerns about nanotoxicity. Prioritizing thorough research on above facets can ensure sustainability and safety, enabling responsible harnessing of nanotechnology's transformative potential in various applications including mitigating global climate change and enhancing agricultural productivity.

Cationic Amphiphilic Comb-Shaped Polymer Emulsifier for Fabricating Avermectin Nanoemulsion with Exceptional Leaf Behaviors and Multidimensional Controlled Release

The development of intelligent multifunctional nanopesticides featuring enhanced foliage affinity and hierarchical target release is increasingly pivotal in modern agriculture. In this study, a novel cationic amphiphilic comb-shaped polymer, termed PEI-TA, was prepared via a one-step Michael addition between low-molecular-weight biodegradable polyethylenimine (PEI) and tetradecyl acrylate (TA), followed by neutralization with acetic acid. Using the emulsifier PEI-TA, a positively charged avermectin (AVM) nanoemulsion was prepared via a phase inversion emulsification process. Under optimal formulation, the obtained AVM nanoemulsion (defined as AVM@PEI-TA) demonstrated exceptional properties, including small size (as low as 67.6 nm), high encapsulation efficiency (up to 87.96%), and high stability toward shearing, storage, dilution, and UV irradiation. The emulsifier endowed AVM@PEI-TA with a pronounced thixotropy, so that the droplets exhibited no splash and bounce when they were sprayed on the cabbage leaf. Owing to the electrostatic attraction between the emulsifier and the leaf, AVM@PEI-TA showed improved leaf adhesion, better deposition, and higher washing resistance in contrast to both its negatively charged counterpart and AVM emulsifiable concentrate (AVM-EC). Compared to the large-sized particles, the small-sized particles of the AVM nanoemulsion more effectively traveled long distances through the vascular system of veins after entering the leaf apoplast. Moreover, the nanoparticles lost stability when exposed to multidimensional stimuli, including pH, temperature, esterase, and ursolic acid individually or simultaneously, thereby promoting the release of AVM. The release mechanisms were discussed for understanding the important role of the emulsifier in nanopesticides.

Redox/pH Dual-Responsive Fluorescent Nanoparticles for Intelligent Pesticide Release and Visualization in Gray Mold Disease Synergistic Control

An intelligent delivery nanoformulation could enhance the utilization efficacy, uptake, and translocation of pesticides in plants. Herein, a redox/pH-triggered and fluorescent smart delivery nanoformulation was designed and constructed by using hollow mesoporous organosilica nanoparticles (HMONs) and ZnO quantum dots as the nanocarrier and capping agent, respectively. Boscalid was further loaded to generate Boscalid@HMONs@ZnO with a loading rate of 9.8% for controlling Botrytis cinerea (B. cinerea). The quantity of boscalid released by Boscalid@HMONs@ZnO in a glutathione environment or at pH 3.0 was 1.3-fold and 1.9-fold higher than that in a neutral condition. Boscalid@HMONs@ZnO has 1.7-fold the toxicity index of boscalid technical against B. cinerea in antifungal experiments. Pot experiments revealed that the efficacy of Boscalid@HMONs@ZnO was significantly enhanced more than 1.27-fold compared to commercially available water-dispersible granules of boscalid. Due to the fluorescence properties of Boscalid@HMONs@ZnO, pesticide transport's real-time monitoring of pesticide translocation in tomato plants could be observed by confocal laser scanning microscopy. Fluorescence images revealed that HMONs@ZnO had been effectively transported via treated leaves or roots in tomato plants. This research showed the successful application of HMONs@ZnO as a nanocarrier for controlling disease and offered an effective avenue to explore the real-time tracking of pesticide translocation in plants.

Macromolecules-based encapsulation of pesticides with carriers: A promising approach for safe and effective delivery

The global issue of pollution caused by the misuse and indiscriminate application of pesticides has reached critical levels. In this vein, encapsulating pesticides with carriers offers a promising approach that impacts key parameters such as pesticide release kinetics, stability, and biocompatibility, enhancing the safe and effective delivery of agrochemicals. Encapsulated pesticides hold the potential to reduce off-target effects, decrease environmental contamination, and improve overall crop protection. This review highlights the potential benefits and challenges associated with the use of both organic and in-organic carriers in pesticide encapsulation, and the current state of research in this field. Overall, the encapsulation of pesticides with carriers presents a promising approach for the safe and effective delivery of these vital agricultural compounds. By harnessing the advantages of encapsulation, this technique offers a potential solution to mitigate the adverse effects of conventional pesticides and contribute towards sustainable and environmentally conscious farming practices. Further research and development in this field is necessary to optimize the encapsulation process, carrier properties and advance towards sustainable and environmentally friendly pesticide delivery systems.

Recent Advances in Stimulus-Responsive Nanocarriers for Pesticide Delivery

In an effort to make pesticide use safer, more efficient, and sustainable, micro-/nanocarriers are increasingly being utilized in agriculture to deliver pesticide-active agents, thereby reducing quantities and improving effectiveness. In the use of nanopesticides, the choice to further design and prepare pesticide stimulus-responsive nanocarriers based on changes in the plant growth environment (light, temperature, pH, enzymes, etc.) has received more and more attention from researchers. Based on this, this paper examines recent advancements in nanomaterials for the design of stimulus-responsive micro-/nanocarriers. It delves into the intricacies of preparation methods, material enhancements, in vivo/ex vivo controlled release, and application techniques for controlled release formulations. The aim is to provide a crucial reference for harnessing nanotechnology to pursue reduced pesticide use and increased efficiency.

Critical Review: Uptake and Translocation of Organic Nanodelivery Vehicles in Plants

Nanodelivery vehicles (NDVs) are engineered nanomaterials (ENMs) that, within the agricultural sector, have been investigated for their ability to improve uptake and translocation of agrochemicals, control release, or target specific tissues or subcellular compartments. Both inorganic and organic NDVs have been studied for agrochemical delivery in the literature, but research on the latter has been slower to develop than the literature on the former. Since the two classes of nanomaterials exhibit significant differences in surface chemistry, physical deformability, and even colloidal stability, trends that apply to inorganic NDVs may not hold for organic NDVs, and vice versa. We here review the current literature on the uptake, translocation, biotransformation, and cellular and subcellular internalization of organic NDVs in plants following foliar or root administration. A background on nanomaterials and plant physiology is provided as a leveling ground for researchers in the field. Trends in uptake and translocation are examined as a function of NDV properties and compared to those reported for inorganic nanomaterials. Methods for assessing fate and transport of organic NDVs in plants (a major bottleneck in the field) are discussed. We end by identifying knowledge gaps in the literature that must be understood in order to rationally design organic NDVs for precision agrochemical nanodelivery.

Effect of Brucea javanica Oil on the Toxicity of β-Cypermethrin Emulsifiable Concentrate Formulation

Enhancing the performance of traditional pesticide formulations by improving their leaf surface wetting capabilities is a crucial approach for maximizing the pesticide efficiency. This study develops an emulsifiable concentrate (EC) of 4.5% β-cypermethrin containing Brucea javanica oil (BJO). The incorporation of BJO aims to improve the leaf-wetting properties of the EC formulation and enhance its insecticidal effectiveness. The droplet size and emulsion characteristics of β-CYP EC emulsion with varying concentrations of the emulsifier were evaluated, and changes after incorporating BJO were assessed to develop the optimal formulation. A comprehensive comparison was conducted among commercial 4.5% β-cypermethrin EC (β-CYP EC-1), 4.5% β-cypermethrin EC with BJO (β-CYP EC-2), and 4.5% β-cypermethrin EC without BJO (β-CYP EC-3). This comparison encompassed various factors including storage stability, insecticidal activity, cytotoxicity, and wetting performance on cabbage leaves. The results indicated that the ideal emulsifier concentration was 15% emulsifier 0201B. β-CYP EC-2 demonstrated superior wetting properties on cabbage leaves (the wetting performance of β-CYP EC-2 emulsion on cabbage leaves is 2.60 times that of the β-CYP EC-1 emulsion), heightened insecticidal activity against the third larvae of Plutella xylostella [diamondback moth (DBM)] [the insecticidal activity of the β-CYP EC-2 emulsion against the third larvae of DBM is 1.93 times that of the β-CYP EC-1 emulsion (12 h)], and more obvious inhibitory effects on the proliferation of DBM embryo cells than the other tested formulations. These findings have significant implications for advancing pest control strategies and promoting sustainable and effective agricultural practices.

Encapsulated nanopesticides application in plant protection: Quo vadis?

The increased global food insecurity due to the growing population can be addressed with precision and sustainable agricultural practices. To tackle the issues regarding food insecurity, farmers used different agrochemicals that improved plant growth and protection. Among these agrochemicals, synthetic pesticides used for plant protection in the agricultural field have various disadvantages. Conventional applications of synthetic pesticides have drawbacks such as rapid degradation, poor solubility, and non-target effects, as well as increased pesticide runoff that pollutes the environment. Nanotechnology has evolved as a potential solution to increase agricultural productivity through the development of different nanoforms of agrochemicals such as nanopesticides, nano-fabricated fertilizers, nanocapsules, nanospheres, nanogels, nanofibers, nanomicelles, and nano-based growth promoters. Encapsulation of these pesticides inside the nanomaterials has provided good biocompatibility over conventional application by inhibiting the early degradation of active ingredients (AI), increasing the uptake and adhesion of pesticides, improving the stability, solubility, and permeability of the pesticides, and decreasing the environmental impacts due to the pesticide runoff. In this review, different nanoforms of encapsulated pesticides and their smart delivery systems; nanocarriers in RNA interference (RNAi) based pesticides; environmental fate, practical implications, management of nanopesticides; and future perspectives are discussed.

Ascendancy of pyraclostrobin nanocapsule formulation against Rhizoctonia solani: From a perspective of fungus

High-performance pesticide formulations are essential for sustainable agriculture. Among these, nano-pesticides exhibit great advantages in pest control because of their unique size effects. However, the direct effects of nano-formulation fungicides on fungal pathogens remain largely unexplored. In this study, three qualified formulations, suspension concentrate (SC), microcapsules (CS), and nanocapsules (NCS) of pyraclostrobin (PYR) were prepared and utilized to reveal their biocontrol activities against Rhizoctonia solani. Among these three formulations, NCS exhibited notable biocontrol efficacy against R. solani exemplified by an EC50 of 0.319 mg/L for mycelia, distortion of mycelia and abnormalities in cell ultrastructure. Moreover, NCS displayed excellent internalization within R. solani mycelia, contributing to severe damage to cell membrane permeability. Importantly, an equivalent quantity of NCS-PYR showed potent inhibitory effects on the target pathogen, as indicated by reduced adenosine triphosphate (ATP) content and mitochondrial Complex III activity. The NCS consistently exhibited superior in vivo protective and curative activities against R. solani compared to those of CS and SC in rice and faba bean. In summary, we uncovered the strength of rapid efficacy and biocontrol activity of NCS against R. solani and elucidated the advantages of NCS-PYR from the perspective of the target pathogen in agriculture.

Advanced nanopesticides: Advantage and action mechanisms

The use of various chemical substances to control pests, diseases, and weeds in the field is a necessary part of the agricultural development process in every country. While the application of pesticides can improve the quality and yield of crops, plant resistance and the harm caused by pesticide residues to the environment and humans have led to the search for greener and safer pesticide formulations to improve the current situation. In recent years, nanopesticides (NPts) have shown great potential in agriculture due to their high efficiency, low toxicity, targeting, resistance, and controlled slow release demonstrated in the experimental stage. Commonly used approaches to prepare NPts include the use of nanoscale metal materials as active ingredients (AI) (ingredients that can play a role in insecticide, sterilization and weeding) or the construction of carriers based on commonly used pesticides to make them stable in nano-sized form. This paper systematically summarizes the advantages and effects of NPts over conventional pesticides, analyzes the formation and functions of NPts in terms of structure, AI, and additives, and describes the mechanism of action of NPts. Despite the feasibility of NPts use, there is not enough comprehensive research on NPts, which must be supplemented by more experiments in terms of biotoxicology and ecological effects to provide strong support for NPts application.

Eco-Efficient Systems Based on Nanocarriers for the Controlled Release of Fertilizers and Pesticides: Toward Smart Agriculture

The excessive application of pesticides and fertilizers has generated losses in biological diversity, environmental pollution, and harmful effects on human health. Under this context, nanotechnology constitutes an innovative tool to alleviate these problems. Notably, applying nanocarriers as controlled release systems (CRSs) for agrochemicals can overcome the limitations of conventional products. A CRS for agrochemicals is an eco-friendly strategy for the ecosystem and human health. Nanopesticides based on synthetic and natural polymers, nanoemulsions, lipid nanoparticles, and nanofibers reduce phytopathogens and plant diseases. Nanoproducts designed with an environmentally responsive, controlled release offer great potential to create formulations that respond to specific environmental stimuli. The formulation of nanofertilizers is focused on enhancing the action of nutrients and growth stimulators, which show an improved nutrient release with site-specific action using nanohydroxyapatite, nanoclays, chitosan nanoparticles, mesoporous silica nanoparticles, and amorphous calcium phosphate. However, despite the noticeable results for nanopesticides and nanofertilizers, research still needs to be improved. Here, we review the relevant antecedents in this topic and discuss limitations and future challenges.

Nanoengineered particles for sustainable crop production: potentials and challenges

Nanoengineered nanoparticles have a significant impact on the morphological, physiology, biochemical, cytogenetic, and reproductive yields of agricultural crops. Metal and metal oxide nanoparticles like Ag, Au, Cu, Zn, Ti, Mg, Mn, Fe, Mo, etc. and ZnO, TiO2, CuO, SiO2, MgO, MnO, Fe2O3 or Fe3O4, etc. that found entry into agricultural land, alter the morphological, biochemical and physiological system of crop plants. And the impacts on these parameters vary based on the type of crop and nanoparticles, doses of nanoparticles and its exposure situation or duration, etc. These nanoparticles have application in agriculture as nanofertilizers, nanopesticides, nanoremediator, nanobiosensor, nanoformulation, phytostress-mediator, etc. The challenges of engineered metal and metal oxide nanoparticles pertaining to soil pollution, phytotoxicity, and safety issue for food chains (human and animal safety) need to be understood in detail. This review provides a general overview of the applications of nanoparticles, their potentials and challenges in agriculture for sustainable crop production.

Nanoparticles in Plants: Uptake, Transport and Physiological Activity in Leaf and Root

Due to their unique characteristics, nanoparticles are increasingly used in agricultural production through foliage spraying and soil application. The use of nanoparticles can improve the efficiency of agricultural chemicals and reduce the pollution caused by the use of agricultural chemicals. However, introducing nanoparticles into agricultural production may pose risks to the environment, food and even human health. Therefore, it is crucial to pay attention to the absorption migration, and transformation in crops, and to the interaction with higher plants and plant toxicity of nanoparticles in agriculture. Research shows that nanoparticles can be absorbed by plants and have an impact on plant physiological activities, but the absorption and transport mechanism of nanoparticles is still unclear. This paper summarizes the research progress of the absorption and transportation of nanoparticles in plants, especially the effect of size, surface charge and chemical composition of nanoparticle on the absorption and transportation in leaf and root through different ways. This paper also reviews the impact of nanoparticles on plant physiological activity. The content of the paper is helpful to guide the rational application of nanoparticles in agricultural production and ensure the sustainability of nanoparticles in agricultural production.

Towards Sustainable Green Adjuvants for Microbial Pesticides: Recent Progress, Upcoming Challenges, and Future Perspectives

Microbial pesticides can be significantly improved by adjuvants. At present, microbial pesticide formulations are mainly wettable powders and suspension concentrations, which are usually produced with adjuvants such as surfactants, carriers, protective agents, and nutritional adjuvants. Surfactants can improve the tension between liquid pesticides and crop surfaces, resulting in stronger permeability and wettability of the formulations. Carriers are inert components of loaded or diluted pesticides, which can control the release of active components at appropriate times. Protective agents are able to help microorganisms to resist in adverse environments. Nutritional adjuvants are used to provide nutrients for microorganisms in microbial pesticides. Most of the adjuvants used in microbial pesticides still refer to those of chemical pesticides. However, some adjuvants may have harmful effects on non-target organisms and ecological environments. Herein, in order to promote research and improvement of microbial pesticides, the types of microbial pesticide formulations were briefly reviewed, and research progress of adjuvants and their applications in microbial pesticides were highlighted, the challenges and the future perspectives towards sustainable green adjuvants of microbial pesticides were also discussed in this review.

Polymer nanoparticles pass the plant interface

As agriculture strives to feed an ever-increasing number of people, it must also adapt to increasing exposure to minute plastic particles. To learn about the accumulation of nanoplastics by plants, we prepared well-defined block copolymer nanoparticles by aqueous dispersion polymerisation. A fluorophore was incorporated via hydrazone formation and uptake into roots and protoplasts of Arabidopsis thaliana was investigated using confocal microscopy. Here we show that uptake is inversely proportional to nanoparticle size. Positively charged particles accumulate around root surfaces and are not taken up by roots or protoplasts, whereas negatively charged nanoparticles accumulate slowly and become prominent over time in the xylem of intact roots. Neutral nanoparticles penetrate rapidly into intact cells at the surfaces of plant roots and into protoplasts, but xylem loading is lower than for negative nanoparticles. These behaviours differ from those of animal cells and our results show that despite the protection of rigid cell walls, plants are accessible to nanoplastics in soil and water.

Basic Technology and Recent Trends in Agricultural Formulation and Application Technology

Recent requirements of the pesticide industry have become much severer, and pesticides (formulated products) are required to satisfy higher safety to both human beings and the environment, higher biological efficacy, lower price, and labor-saving. This review explains the outline of basic pesticide formulation technology, followed by recent advances in developing new formulations and application technologies. Labor-saving formulations and application technologies, environmental load reduction technologies, and user-friendly formulations and application technologies are elucidated.

Preparation and Phytotoxicity Evaluation of Cellulose Acetate Nanoparticles

The use of biocompatible and low-cost polymeric matrices to produce non-phytotoxic nanoparticles for delivery systems is a promising alternative for good practices in agriculture management and biotechnological applications. In this context, there is still a lack of studies devoted to producing low-cost polymeric nanoparticles that exhibit non-phytotoxic properties. Among the different polymeric matrices that can be used to produce low-cost nanoparticles, we can highlight the potential application of cellulose acetate, a natural biopolymer with biocompatible and biodegradable properties, which has already been used as fibers, membranes, and films in different agricultural and biotechnological applications. Here, we provided a simple and low-cost route to produce cellulose acetate nanoparticles (CA-NPs), by modified emulsification solvent evaporation technique, with a main diameter of around 200 nm and a spherical and smooth morphology for potential use as agrochemical nanocarriers. The non-phytotoxic properties of the produced cellulose acetate nanoparticles were proved by performing a plant toxic test by Allium cepa assay. The cytotoxicity and genotoxicity tests allowed us to evaluate the mitotic process, chromosomal abnormalities, inhibition/delay in root growth, and micronucleus induction. In summary, the results demonstrated that CA-NPs did not induce phytotoxic, cytotoxic, or genotoxic effects, and they did not promote changes in the root elongation, germination or in the mitotic, chromosomal aberration, and micronucleus indices. Consequently, the present findings indicated that CA-NPs can be potentially used as environmentally friendly nanoparticles.

An Ecological Approach to Control Pathogens of Lycopersicon esculentum L. by Slow Release of Mancozeb from Biopolymeric Conjugated Nanoparticles

To control insects, weeds, and infections in crops, old-fashioned pesticide formulations (with massive quantities of heavy metals and a variety of chemicals) are used. By biological amplification via the food chain, many of these established pesticide formulations have accumulated in living systems and caused environmental pollution. To form a nanoparticulate matrix with a diameter ranging from 322.2 ± 0.9 to 403.7 ± 0.7 nm, mancozeb was embedded in chitosan-gum acacia (CSGA) biopolymers and loadings were confirmed via TEM and FTIR. Differential scanning calorimetry analyses were carried out as part of the investigation. Inhibition of Alternaria alternata by nanoparticles (NPs) with 1.0 mg/mL mancozeb (CSGA-1.0) was 85.2 ± 0.7 % at 0.5 ppm, whereas for Stemphylium lycopersici it was 62.1 ± 0.7% in the mycelium inhibition method. NPs demonstrated antimicrobial action in pot house environments. After ten hours, the mancozeb was liberated from the nanoformulations due to polymer matrix diffusion and relaxation, compared to 2 h for commercial mancozeb. Even while drug-loaded conjugated nanoparticles have equivalent antifungal activities, they have a lower release rate and, hence, reduced toxicology compared to commercial mancozeb. Therefore, this method can be employed to implement sustainable farming techniques in the future.

One-Step Construct Responsive Lignin/Polysaccharide/Fe Nano Loading System Driven by Digestive Enzymes of Lepidopteran for Precise Delivery of Pesticides

A strategy that relies on the differences in feeding behavior between pests and natural enemies to deliver insecticides precisely was proposed. After proving that the digestive enzymes in Lepidopteran pests can act as triggers for lignin-based controlled-release carriers, a novel multiple-enzyme-responsive lignin/polysaccharide/Fe nanocarrier was constructed by combining the electrostatic self-assembly and chelation and loaded with lambda-cyhalothrin (LC) to form a nanocapsule suspension loading system. The nanocapsules were LC@sodium lignosulfonate/chitosan/Fe (LC@SL/CS/Fe) and LC@sodium lignosulfonate/alkyl polyglycoside quaternary ammonium salt/Fe (LC@SL/APQAS/Fe). LC@SL/APQAS/Fe was more stable than LC@SL/CS/Fe because it adsorbs more Fe³⁺, and the half-lives of LC in LC@SL/APQAS/Fe under UV irradiation were prolonged at 4.02- and 6.03-folds than those of LC@SL/CS/Fe and LC emulsifiable concentrate (LC EC), respectively. Both LC@SL/APQAS/Fe and LC@SL/CS/Fe have responsive release functions to laccase and cellulase, and the release rate of the former was slower. The insecticidal activity of LC@SL/APQAS/Fe against Agrotis ipsilonis was similar to those of LC@SL/CS/Fe and LC EC, while the toxicity of LC@SL/APQAS/Fe to the natural enemy was 2-3 times less than those of LC@SL/CS/Fe and LC EC. Meanwhile, the organic solvent component in the nanocapsule suspension was 94% less than that in the EC preparation. Therefore, the nano loading system based on SL/APQAS/Fe is a promising nanoplatform with the advantages of high efficiency, low toxicity, and environmental friendliness.

Development of a Preemergent Nanoherbicide: From Efficiency Evaluation to the Assessment of Environmental Fate and Risks to Soil Microorganisms

Nanoparticles based on biodegradable polymers have been shown to be excellent herbicide carriers, improving weed control and protecting the active ingredient in the crop fields. Metribuzin is often found in natural waters, which raises environmental concerns. Nanoencapsulation of this herbicide could be an alternative to reduce its losses to the environment and improve gains in its efficiency. However, there is a paucity of information about the behavior of nanoformulations of herbicides in environmental matrices. In this study, the stability of nanoencapsulated metribuzin in polymeric nanoparticles (nanoMTZ) was verified over time, as well as its dissipation in different soils, followed by the effects on soil enzymatic activity. The physiological parameters and control effects of nanoMTZ on Ipomoea grandifolia plants were investigated. No differences were verified in the half-life of nanoencapsulated metribuzin compared to a commercial formulation of the herbicide. Moreover, no suppressive effects on soil enzymatic activities were observed. The retention of nanoMTZ in the tested soils was lower compared to its commercial analogue. However, the mobility of nanoencapsulated metribuzin was not greatly increased, reflecting a low risk of groundwater contamination. Weed control was effective even at the lowest dose of nanoMTZ (48 g a.i. ha-1), which was consistent with the higher efficiency of nanoMTZ compared to the conventional herbicide in inhibiting PSII activity and decreasing pigment levels. Overall, we verified that nanoMTZ presented a low environmental risk, with increased weed control.

Selenium nanoparticles are effective in penetrating pine and causing high oxidative damage to Bursaphelenchus xylophilus in pine wilt disease control

BACKGROUND

Research on selenium nanoparticles (SeNPs) in chemical defense and chemotherapy of plants has developed rapidly owing to their high microbial toxicity, environmental safety, and degradability. Pine wilt disease (PWD) threatens pine forests worldwide; however, it is difficult to kill the nematodes (Bursaphelenchus xylophilus) inside the tree that cause PWD using traditional pesticide formulations. SeNPs could be the key to controlling PWD.

RESULTS

In this study, approximately 50 nm SeNPs were prepared using a simple and green method, and chitosan was used to increase their biocompatibility and stability. The preparation and characterization results showed that the prepared SeNPs coated with chitosan (SeNPs@CS) were spherical and evenly dispersed. The bioassay results showed that SeNPs@CS had an LC₅₀ of 15.627 mg L^-1 against B. xylophilus. In addition, the killing mechanism of SeNPs@CS against B. xylophilus was studied. Confocal microscopy and transmission electron microscopy demonstrated that B. xylophilus were killed by reactive oxygen species, and the penetration of nano-form materials to B. xylophilus was higher than that of non-nano-form materials. To verify the effective penetration of SeNPs in pine tissues, Cy5-labeled SeNPs@CS was observed inside pine needles and branches using frozen sections and confocal microscopy. In addition, the cytotoxicity of SeO₂ and SeNPs@CS was tested, and the results showed that the cytotoxicity of SeNPs@CS to MC3T3-E1 cells was reduced.

CONCLUSION

These results show that SeNPs are expected to be used as a new strategy for the control of PWD with oxidative damage and high penetration to B. xylophilus and effective target penetration and biosafety. © 2022 Society of Chemical Industry.

Fluorescent labeling as a strategy to evaluate uptake and transport of polymeric nanoparticles in plants

The use of biodegradable nanopolymers in agriculture offers an excellent alternative for the efficient delivery of agrochemicals that promote plant protection and development. However, tracking of these systems inside plants requires complex probe tagging strategies. In addition to providing a basis for better understanding such nanostructures to optimize delivery system design, these probes allow monitoring the migration of nanoparticles through plant tissues, and determine accumulation sites. Thus, these probes are powerful tools that can be used to quantify and visualize nanoparticle accumulation in plant cells and tissues. This review is an overview of the methods involved in labeling nanocarriers, mainly based on polymeric matrices, for the delivery of nanoagrochemicals and the recent advances in this field.

Biopolymer-based nanocarriers for sustained release of agrochemicals: A review on materials and social science perspectives for a sustainable future of agri- and horticulture

Devastating plant diseases and soil depletion rationalize an extensive use of agrochemicals to secure the food production worldwide. The sustained release of fertilizers and pesticides in agriculture is a promising solution to the eco-toxicological impacts and it might reduce the amount and increase the effectiveness of agrochemicals administration in the field. This review article focusses on carriers with diameters below 1 μm, such as capsules, spheres, tubes and micelles that promote the sustained release of actives. Biopolymer nanocarriers represent a potentially environmentally friendly alternative due to their renewable origin and biodegradability, which prevents the formation of microplastics. The social aspects, economic potential, and success of commercialization of biopolymer based nanocarriers are influenced by the controversial nature of nanotechnology and depend on the use case. Nanotechnology's enormous innovative power is only able to unfold its potential to limit the effects of climate change and to counteract current environmental developments if the perceived risks are understood and mitigated.

Stability Phenomena Associated with the Development of Polymer-Based Nanopesticides

Pesticides have been used in agricultural activity for decades because they represent the first defense against pathogens, harmful insects, and parasitic weeds. Conventional pesticides are commonly employed at high dosages to prevent their loss and degradation, guaranteeing effectiveness; however, this results in a large waste of resources and significant environmental pollution. In this regard, the search for biocompatible, biodegradable, and responsive materials has received greater attention in the last years to achieve the obtention of an efficient and green pesticide formulation. Nanotechnology is a useful tool to design and develop “nanopesticides” that limit pest degradation and ensure a controlled release using a lower concentration than the conventional methods. Besides different types of nanoparticles, polymeric nanocarriers represent the most promising group of nanomaterials to improve the agrochemicals’ sustainability due to polymers’ intrinsic properties. Polymeric nanoparticles are biocompatible, biodegradable, and suitable for chemical surface modification, making them attractive for pesticide delivery. This review summarizes the current use of synthetic and natural polymer-based nanopesticides, discussing their characteristics and their most common design shapes. Furthermore, we approached the instability phenomena in polymer-based nanopesticides and strategies to avoid it. Finally, we discussed the environmental risks and future challenges of polymeric nanopesticides to present a comprehensive analysis of this type of nanosystem.

A Star Polyamine-Based Nanocarrier Delivery System for Enhanced Avermectin Contact and Stomach Toxicity against Green Peach Aphids

The unscientific application of synthesized/botanical pesticides has not only brought the resistance of plant pathogens and pests, but also led to serious environmental pollution. In recent years, various nano-delivery systems have been used for the development of environmental-friendly pesticides with improved efficacy. Herein, the current study constructed an efficient avermectin B1a (AVM) nano-delivery system based on a star polyamine (SPc) and focused on the characterization and bioactivity of SPc-loaded AVM at various mass ratios. The hydroxyl groups of AVM could assemble with carbonyl groups of SPc through hydrogen bond and van der Waals forces, and the self-assembly of AVM and SPc formed nearly spherical particles of AVM/SPc complex with nanoscale size. The contact angle of SPc-loaded AVM decreased with the increasing mass ratio of SPc, revealing the easier distribution and spreading of the AVM/SPc complex. Furthermore, the stomach and contact toxicity of AVM/SPc complex also increased along with the increasing SPc mass ratio, which could be attributed to the enhanced systemic transportation in plants, enlarged contact area to insect pests and stronger permeability across the insect cuticle. The current study provides an efficient nano-delivery system for increasing stomach and contact toxicity of pesticides with wide applications in the agricultural field.

Zein and lignin-based nanoparticles as soybean seed treatment: translocation and impact on seed and plant health

Zein nanoparticles (ZNPs) were synthesized with a cationic surfactant, didodecyldimethylammonium bromide (122.9 ± 0.8 nm, + 59.7 ± 4.4 mV) and a non-ionic surfactant, Tween 80 (118.7 ± 1.7 nm, + 26.4 ± 1.1 mV). Lignin-graft-poly(lactic-co-glycolic) acid nanoparticles (LNPs) were made without surfactants (52.9 ± 0.2 nm, − 54.9 ± 0.5 mV). Both samples were applied as antifungal seed treatments on soybeans, and their impact on germination and plant health was assessed. Treated seeds showed high germination rates (> 90% for all treatment groups), similar to the control group (100%). Root and stem lengths and the dry biomass of treated seeds were not statistically distinguishable from the control. Foliage from seed-treated plants was fed to larvae of Chrysodeixis includens with no differences in mortality between treatments. No translocation of fluorescently tagged particles was observed with fluorescence microscopy following seed treatment and germination. Nano-delivered azoxystrobin provided ~ 100% protection when LNPs were used. Results suggest ZNPs and LNPs are safe and effective delivery systems of active compounds for seed treatments.

Nanomaterials for Postharvest Management of Insect Pests: Current State and Future Perspectives

Globally, between one quarter and one-third of total grains produced each year are lost during storage mainly through infestation of insect pests. Among the available control options such as chemical and physical techniques, fumigation with aluminum phosphide (AlP) is so far considered the best control strategy against storage insect pests. However, these insect pests are now developing resistance against AIP due to its indiscriminate use due to non-availability of any effective alternative control option. Resistance to AIP among storage insect pests is increasing, and its inhalation has shown adverse effects on animals and human beings. Nanotechnology has opened up a wide range of opportunities in various fields such as agriculture (pesticides, fertilizers, etc.), pharmaceuticals, and electronics. One of the applications of nanotechnology is the usage of nanomaterial-based insecticide formulations for mitigating field and storage insect pests. Several formulations, namely, nanoemulsions, nanosuspensions, controlled release formulations, and solid-based nanopesticides, have been developed with different modes of action and application. The major advantage is their small size which helps in proper spreading on the pest surface, and thus, better action than conventional pesticides is achieved. Besides their minute size, these have no or reduced harmful effects on non-target species. Nanopesticides can therefore provide green and efficient alternatives for the management of insect pests of field and storage. However, an outcry against the utilization of nano-based pesticides is also revealed. It is considered by some that nano-insecticides may also have hazardous effects on humans as well as on the environment. Due to limited available data, nanopesticides have become a double-edged weapon. Therefore, nanomaterials need to be evaluated extensively for their large-scale adoption. In this article, we reviewed the nanoformulations that are developed and have proved effective against the insect pests under postharvest storage of grains.

Assessment of Antifungal Efficacy and Release Behavior of Fungicide-Loaded Chitosan-Carrageenan Nanoparticles against Phytopathogenic Fungi

Biopolymeric Chitosan-Carrageenan nanocomposites 66.6-231.82 nm in size containing the chemical fungicide mancozeb (nano CSCRG-M) were synthesized following a green chemistry approach. The physicochemical study of nanoparticles (NPs) was accomplished using a particle size analyzer, SEM and FTIR. TEM exhibited clover leaf-shaped nanoparticles (248.23 nm) with mancozeb on the inside and entrapped outside. Differential scanning calorimetry and TGA thermogravimetry exhibited the thermal behaviour of the nanoform. Nano CSCRG-1.5 at 1.5 ppm exhibited 83.1% inhibition against Alternaria solani in an in vitro study and performed as well as mancozeb (84.6%). Complete inhibition was exhibited in Sclerotinia sclerotiorum at 1.0 and 1.5 ppm with the nanoformulation. The in vivo disease control efficacy of mancozeb-loaded nanoparticles against A. solani in pathogenized plants was found to be relatively higher (79.4 ± 1.7) than that of commercial fungicide (76 ± 1.1%) in pot conditions. Nanomancozeb showed superior efficacy for plant growth parameters, such as germination percentage, root-shoot ratio and dry biomass. The nanoformulation showed higher cell viability compared to mancozeb in Vero cell cultures at 0.25 and 0.50 mg/mL in the resazurin assay. CSCRG-0.5 showed slow-release behavior up to 10 h. Thus, these green nano-based approaches may help combat soil and water pollution caused by harmful chemical pesticides.

Phytotoxicological effects of engineered nanoparticles: An emerging nanotoxicology

Recent innovations in the field of nanoscience and technology and its proficiency as a part of inter-disciplinary science has set an eclectic display in innumerable branches of science, a majority in aliened health science of human and agriculture. Modern agricultural practices have been shifting towards the implementation of nanotechnology-based solutions to combat various emerging problems ranging from safe delivery of nutrients to sustainable approaches for plant protection. In these processes, engineered nanoparticles (ENPs) are widely used as nanocarriers (to deliver nutrients and pesticides) due to their high permeability, efficacy, biocompatibility, and biodegradability properties. Even though the constructive nature of nanoparticles (NPs), nanomaterials (NMs), and other modified or ENPs towards sustainable development in agriculture is referenced, the darker side i.e., eco-toxicological effects is still not covered to a larger extent. The overwhelming usage of these trending NMs has led to continuous persistence in the ecosystem, and their interface with the biotic and abiotic community, degradation lanes and intervention, which might lead to certain beneficial or malefic effects. Metal oxide NPs and polymeric NPs (Alginate, chitosan, and polyethylene glycol) are the most used ENPs, which are posing the nature of beneficial as well as environmentally concerning hazardous materials depending upon their fate and persistence in the ecosystem. The cautious usage of NMs in a scientific way is most essential to harness beneficial aspects of NMs in the field of agriculture whilst minimizing the eco-toxicological effects. The current review is focused on the toxicological effects of various NMs on plant physiology and health. It details interactions of plant intracellular components between applied/persistent NMs, which have brought out drastic changes in seed germination, crop productivity, direct and indirect interaction at the enzymatic as well as nuclear levels. In conclusion, ENPs can pose as genotoxicants that may alter the plant phenotype if not administered appropriately.

MXene (Ti3C2) Based Pesticide Delivery System for Sustained Release and Enhanced Pest Control

A multifunctional nanomaterials based pesticide delivery system provides a powerful strategy for the efficient utilization of pesticides. We present here the application of a 2D MXene (Ti₃C₂) nanomaterial for pesticide delivery and plant protection. Avermectin (AV), a hydrophobic and unstable insecticide, was chosen as the model pesticide. In our study, AV@Ti₃C₂ was formed by fast adsorption of AV on Ti₃C₂, with a maximum loading capacity of 81.44%. Compared with hydrophobic AV, AV@Ti₃C₂ exhibited significantly improved water solubility, which is beneficial for ensuring the bioactivity of pesticide. The AV@Ti₃C₂ nanoformulation showed pH responsive slow-release behavior, overcoming the burst-release of conventional AV formulations. Besides, AV@Ti₃C₂ possessed excellent photostability under UV irradiation, which prolonged the persistent period of AV. Therefore, AV@Ti₃C₂ performed sustaining and enhanced antipest activity, according to the bioactivity assay. Furthermore, AV@Ti₃C₂ showed satisfactory biosafety, with no negative effect to the germination and growth of maize. Our current research provides a potential candidate, AV@Ti₃C₂, for pest control, and also broadens the application of 2D MXene materials in plant protection and sustainable agriculture.

A systematic study to unravel the potential of using polysaccharides based organic-nanoparticles versus hybrid-nanoparticles for pesticide delivery

To daze conventional pesticide release limitations, nanotechnology-mediated pesticide delivery using natural polymers has been actively investigated. However, the lack of information on what are the beneficial/non-beneficial aspects of using hybrid- and organic-nanoparticles (NP) and among the polysaccharides which are better suited concerning pesticide loading efficiency (PLE wt%), entrapment efficiency, and sustained pesticide release (SPR %) has prompted us to investigate this study. In this report, we systematically investigated a series of polysaccharides such as starch (S), cellulose (C), aminocellulose (AC), and sodium carboxymethylcellulose (NaCMC) coated on magnetite NP (MNP, Fe₃O₄) and complete organic nanocarrier systems (starch and cellulose) that have no MNP part were compared for the PLE wt% and SPR % efficiencies for chlorpyrifos (ChP) insecticide. Overall, all nanocarriers (NCs) have shown good to excellent PLE wt% due to the smaller-sized NP obtained through optimal conditions. However, among the hybrid polysaccharides studied, starch MNP has shown a maximum PLE of 111 wt% in comparison with other polysaccharides (80-94 wt%) coated hybrid-NCs as well as with organic-NCs (81-87 wt%). The use of inorganic support does improve the PLE wt% markedly for starch but not for cellulose derivatives. Similarly, the SPR results of S-NP showed a remarkably better sustained release profile for ChP of 88% in 14 d. In contrast, other unfunctionalized and functionalized celluloses exhibited poor release profiles of 60%-20% for the same period. This study may help the researchers choose the right system for designing and achieving enhanced pesticide efficiency.

Preparation of p-amino salicylic acid-modified polysuccinimide as water-based nanocarriers for enhancing pesticide stability and insecticidal activity

Avermectin (AVM) is a biopesticide with low toxicity and high activity, but has limited use due to its poor water solubility and easy decomposition. A delivery system that can stabilize this biopesticide can play a significant role for improving its biological activity. Herein, water-dispersible functionalized polysuccinimide nanoparticles (PAD) were prepared by a ring-opening reaction and subsequently used to encapsulate AVM via self-assembly to form AVM@PAD nanoparticles with a loading ratio of 10.04 %. The half-life under UV radiation (300 W) of AVM@PAD was three times higher than that of free AVM, demonstrating the excellent protective ability of PAD. In addition, AVM@PAD nanoparticles could sustain the release of AVM for 70 h with a cumulative release rate of 70 %. AVM@PAD nanoparticles also showed a pH-responsive release, and their maximum cumulative release rate was at neutral pH. Moreover, the median lethal concentration (LC₅₀) value of AVM@PAD with respect to Plutella xylostella was 34.50 mg/L, while that of free AVM was 56.05 mg/L. These results showed that the AVM@PAD nanoparticles can potentially and effectively promote drug stability and biological activity in agriculture.

Zoxamide accumulation and retention evaluation after nanosuspension technology application in tomato plant

BACKGROUND

Low water solubility of pesticide requires formulations with high levels of stabilizers and organic solvents. Moreover, only 0.1% of the applied pesticides formulation reaches the target, while 99.9% spreads in the surrounding environment. Therefore, there is the need for more efficient and environmentally sustainable alternatives.

RESULTS

Zoxamide (ZO) nanosuspension was prepared through a media milling technique by using the stabilizer polysorbate 80. The thin and acicular crystals obtained, showed particle size of 227 nm, polydispersion index of 0.247 and zeta potential of -28 mV. Dimensional data and morphology of ZO nanocrystals alone, on tomato leaves and berries, were confirmed by scanning electron microscopy. The reduction in size for ZO crystals obtained after the milling process increased pesticide water solubility till 39.6 mg L^-1 , about 1.6 the solubility obtained with a conventional commercial formulation. Field and dip contamination trials performed on tomato plants showed the nanosuspension's ability to increase ZO deposition and accumulation versus a coarse ZO suspension and commercial formulation, respectively.

CONCLUSIONS

The nanoformulation proposed, resulted in low cost and was easy to make. Moreover, the organic solvent-free composition together with a low surfactant addition assured a minor environmental impact. Finally, the increased retention and deposition of the fungicide can reduce the amounts of ZO formulation applied to tomatoes. © 2021 Society of Chemical Industry.

Ecotoxicological and regulatory aspects of environmental sustainability of nanopesticides

Recent years have seen the development of various colloidal formulations of pesticides and other agrochemicals aimed at use in sustainable agriculture. These formulations include inorganic, organic or hybrid particulates, or nanocarriers composed of biodegradable polymers, that can provide a better control of the release of active ingredients. The very small particle sizes and high surface areas of nanopesticides may however also lead to some unintended (eco)toxicological effects due to the way in which they interact with the target and non-target species and the environment. The current level of knowledge on ecotoxicological effects of nanopesticides is scarce, especially in regard to the fate and behaviour of such formulations in the environment. Nanopesticides will however have to cross a stringent regulatory scrutiny before marketing in most countries for health and environmental risks under a range of regulatory frameworks that require pre-market notification, risk assessment and approval, followed by labelling, post-market monitoring and surveillance. This review provides an overview of the key regulatory and ecotoxicological aspects relating to nanopesticides that will need to be considered for environmentally-sustainable use in agriculture.

Recent advances in biodegradable matrices for active ingredient release in crop protection: Towards attaining sustainability in agriculture

Climate changes, emerging species of plant pests, and deficits of clean water and arable land have made availability of food to the ever-increasing global population a challenge. Excessive use of synthetic pesticides to meet ever-increasing production needs has resulted in development of resistance in pest populations, as well as significant ecotoxicity, which has directly and indirectly impacted all life-forms on earth. To meet the goal of providing safe, sufficient, and high-quality food globally with minimal environmental impact, one strategy is to focus on targeted delivery of pesticides using eco-friendly and biodegradable carriers that are derived from naturally available materials. Herein, we discuss some of the recent approaches to use biodegradable matrices in crop protection, while exploring their design and efficiency. We summarize by discussing associated challenges with the existing approaches and future trends that can lead the world to more sustainable agricultural practices.

•

Providing food safety and security is critical for the growing global population.

•

Crop yield is affected by various biotic and abiotic factors.

•

Targeted/sustained delivery of agrochemicals reduces excessive use of pesticides.

•

Nature-derived biodegradable materials curtail plant health and environmental harm.

•

Biodegradable matrices hold promise for sustainable crop protection.

Stimuli-responsive hydrogel as carrier for controlling the release and leaching behavior of hydrophilic pesticide

In this work, biochar based hydrogel microspheres were fabricated successfully to develop pH and ion strength dual-stimuli responsively controlled-release system for hydrophilic pesticide. Herein, gentian violet (GV) was selected as model hydrophilic pesticide. Taking advantage of the cross-linking reaction, GV was incorporated into biochar and the 3D network-structured hydrogel, guaranteeing a satisfying encapsulation efficiency and sustained release of pesticide. The leaching behavior of pesticide in simulated soil column at different pHs and ion strength was in accordance with the corresponding release performance, and bulk of pesticide was retarded on the surface. In addition, the pesticide carrier had nearly no toxic effect on the cell proliferation and zebrafish embryo, displaying a good biosafety. The work provides a promising strategy with a low-cost and simple procedure that could regulate pesticide release behavior, decrease leaching loss, and improve the utilization efficiency of pesticide.

Sonication-Assisted Production of Fosetyl-Al Nanocrystals: Investigation of Human Toxicity and In Vitro Antibacterial Efficacy against Xylella Fastidiosa

Recently, there is a growing demand in sustainable phytopathogens control research. Nanotechnology provides several tools such as new pesticides formulations, antibacterial nanomaterials and smart delivery systems. Metal nano-oxides and different biopolymers have been exploited in order to develop nanopesticides which can offer a targeted solution minimizing side effects on environment and human health. This work proposed a nanotechnological approach to obtain a new formulation of systemic fungicide fosetyl-Al employing ultrasonication assisted production of water dispersible nanocrystals. Moreover, chitosan was applicated as a coating agent aiming a synergistic antimicrobial effect between biopolymer and fungicide. Fosetyl-Al nanocrystals have been characterized by morphological and physical-chemical analysis. Nanotoxicological investigation was carried out on human keratinocytes cells through cells viability test and ultrastructural analysis. In vitro planktonic growth, biofilm production and agar dilution assays have been conducted on two Xylella fastidiosa subspecies. Fosetyl-Al nanocrystals resulted very stable over time and less toxic respect to conventional formulation. Finally, chitosan-based fosetyl-Al nanocrystals showed an interesting antibacterial activity against Xylella fastidiosa subsp. pauca and Xylella fastidiosa subsp. fastidiosa.

Atrazine nanoencapsulation improves pre-emergence herbicidal activity against Bidens pilosa without enhancing long-term residual effect on Glycine max

BACKGROUND

Poly(ϵ-caprolactone) nanocapsules (NC + ATZ) are an efficient carrier system for atrazine and were developed as an alternative to reduce the harmful environmental effects of this herbicide. Here, we analyzed the pre-emergence herbicidal activity of NC + ATZ against Bidens pilosa and evaluated its residual effect on soybean plants after different periods of soil treatment with the formulations.

RESULTS

In contrast to non-nanoatrazine, NC + ATZ treatment led to very high mortality rates of B. pilosa seedlings even after a tenfold dilution, which suggests that atrazine nanoencapsulation improved its pre-emergence herbicidal activity. In a short-term assay (17 days), soil treatment with all atrazine-containing formulations resulted in intense toxicity to soybean plants. NC + ATZ at 200 g ha-1 had the same inhibitory effects on the physiological and growth parameters of soybean plants compared with non-nanoatrazine at 2000 g ha-1 , which suggests that atrazine nanoencapsulation increased the short-term residual effect of the herbicide. In a long-term assay (60 days), a gradual recovery of soybean plants from atrazine phytotoxicity was observed. When comparing the effects of nano- and non-nanoatrazine at the same concentrations, the growth and physiological parameters of soybean plants were mainly affected to the same extent. This indicates that encapsulation of atrazine into poly(ϵ-caprolactone) nanocapsules did not enhance the long-term residual effect of the herbicide on soybean.

CONCLUSION

NC + ATZ could be applied for efficient weed control without additional phytotoxicity to susceptible crops compared with non-nanoatrazine, provided that a safe interval is respected from atrazine application to sowing. © 2019 Society of Chemical Industry.

Can atrazine loaded nanocapsules reduce the toxic effects of this herbicide on the fish Prochilodus lineatus? A multibiomarker approach

Atrazine (ATZ) is a widely used herbicide that has the potential to contaminate the environment and cause deleterious effects on non-target organisms. Release systems for ATZ have been developed to minimize this contamination, such as nanocapsules prepared with poly (ε-caprolactone) (PCL). The objective of this work was to investigate the effects of nanoencapsulated ATZ compared to ATZ on biomarkers of the freshwater teleost Prochilodus lineatus. The fish were exposed for 24 and 96 h to nanoencapsulated ATZ (nATZ) and atrazine (ATZ) at concentrations of 2 and 20 μg L^-1, just to the PCL nanocapsules without the herbicide (NANO) in the corresponding amounts or only to dechlorinated water (CTR). The results showed that nATZ was less toxic compared to ATZ, as it did not promote an increase in glycemia, alterations in antioxidants, nor in carbonic anhydrase enzyme activity, and no increase in the frequency of micronuclei and other nuclear erythrocyte abnormalities either. However, exposure to nATZ, as well as to ATZ and PCL nanocapsules, resulted in a reduction in hemoglobin content, increase in erythrocyte DNA damage, as well as changes in Ca²⁺-ATPase activity, leading to a decrease in plasma Ca⁺². The Integrated Biomarker Response Index (IBR) depicted that exposure to ATZ promoted changes in a greater number of biomarkers compared to nATZ, indicating that the nanoencapsulation of the herbicide protected the animal from the effects of ATZ.

Nano-based smart pesticide formulations: Emerging opportunities for agriculture

The incorporation of nanotechnology as a means for nanopesticides is in the early stage of development. The main idea behind this incorporation is to lower the indiscriminate use of conventional pesticides to be in line with safe environmental applications. Nanoencapsulated pesticides can provide controlled release kinetics, while efficiently enhancing permeability, stability, and solubility. Nanoencapsulation can enhance the pest-control efficiency over extended durations by preventing the premature degradation of active ingredients (AIs) under harsh environmental conditions. This review is thus organized to critically assess the significant role of nanotechnology for encapsulation of AIs for pesticides. The smart delivery of pesticides is essential to reduce the dosage of AIs with enhanced efficacy and to overcome pesticide loss (e.g., due to leaching and evaporation). The future trends of pesticide nanoformulations including nanomaterials as AIs and nanoemulsions of biopesticides are also explored. This review should thus offer a valuable guide for establishing regulatory frameworks related to field applications of these nano-based pesticides in the near future.

Pesticide Encapsulation at the Nanoscale Drives Changes to the Hydrophobic Partitioning and Toxicity of an Active Ingredient

Given the costs associated with designing novel active ingredients, new formulations focus on the use of other ingredients to modify existing formulations. Nanosized encapsulated pesticides offer a variety of enhanced features including controlled release and improved efficacy. Despite the presence of nanosized capsules in current-use pesticide formulations, the analytical and toxicological implications of encapsulation are uncertain. To explore this issue quantitatively, we fractionated the capsules of a commercially available encapsulated insecticide formulation (γ-cyhalothrin active ingredient) into two size ranges: a large fraction (LF), with an average hydrodynamic diameter (HDD) of 758 nm, and a small fraction (SF), with an average HDD of 449 nm. We developed a novel extraction method demonstrating a time-dependent inhibition of γ-cyhalothrin from capsules for up to 48 h. An acute immobilization test with a freshwater macroinvertebrate (Ceriodaphnia dubia) revealed that the SF was significantly more toxic than both the LF and the free γ-cyhalothrin treatment (EC50 = 0.18 µg/L, 0.57 µg/L, and 0.65 µg/L, respectively). These findings highlight that encapsulation of γ-cyhalothrin mitigates hydrophobic partitioning in a time-dependent manner and influences toxicity in a size-dependent manner. Recognizing the analytical and toxicological nuances of various nanosized capsules can contribute to innovation in pesticide formulations and may lead to more comprehensive pesticide regulation.

Nanotechnology for Plant Disease Management

Each year, 20%–40% of crops are lost due to plant pests and pathogens. Existing plant disease management relies predominantly on toxic pesticides that are potentially harmful to humans and the environment. Nanotechnology can offer advantages to pesticides, like reducing toxicity, improving the shelf-life, and increasing the solubility of poorly water-soluble pesticides, all of which could have positive environmental impacts. This review explores the two directions in which nanoparticles can be utilized for plant disease management: either as nanoparticles alone, acting as protectants; or as nanocarriers for insecticides, fungicides, herbicides, and RNA-interference molecules. Despite the several potential advantages associated with the use of nanoparticles, not many nanoparticle-based products have been commercialized for agricultural application. The scarcity of commercial applications could be explained by several factors, such as an insufficient number of field trials and underutilization of pest–crop host systems. In other industries, nanotechnology has progressed rapidly, and the only way to keep up with this advancement for agricultural applications is by understanding the fundamental questions of the research and addressing the scientific gaps to provide a rational and facilitate the development of commercial nanoproducts.

Development of Multifunctional Avermectin Poly(succinimide) Nanoparticles to Improve Bioactivity and Transportation in Rice

Avermectin (AVM) as a nonsystemic pesticide possesses a low effective utilization rate. Studies of the multifunctional pesticide delivery system for improving biological activity are developing prosperously. In this study, multifunctional avermectin/polysuccinimide with glycine methyl ester nanoparticles (AVM-PGA) were prepared by the self-assembly process. The AVM loading capacity was up to 23.7%. After 24 h of UV irradiation, there was still about 70% of AVM remaining in PGA₄₂ nanocarriers, as opposed to less than 5% of the free-form AVM. The rising ambient pH promoted the release of AVM using an in vitro releasing test, revealing a favorable pH-responsively controlled-release property. The mortality rate of Plutella xylostella with 2.5 μg/mL of AVM content of AVM-PGA₄₂ was 96.3% after 48 h, while that of free AVM was only 51.5%. In addition, the AVM could be detected in stems and all leaves treated with AVM-PGA₄₂ nanoparticles, whereas rare AVM was detected only in treated leaves for the free-form AVM, which achieved the transportation of nanocarriers carrying AVM in rice for the first time. Furthermore, the PGA nanoparticles performed a good growth promoting effect on rice. These results show that the AVM-PGA₄₂ nanopesticides have a great potential application prospect to control the pest and improve the drug utilization efficiency on agriculture.