Functionalizing Double-Network Hydrogels for Applications in Remote Actuation and in Low-Temperature Strain Sensing

Stimulus-responsive cellulose hydrogels in biomedical applications and challenges

Stimuli-responsive cellulose hydrogels have garnered significant attention in the biomedical field owing to their extensive applications in tissue engineering and controlled drug delivery systems. Derived from cellulose and its derivatives, they are synthesized through physical or chemical cross-linking techniques, offering notable advantages such as cost-effectiveness and excellent biocompatibility. These hydrogels can respond to environmental stimuli, including pH variations, temperature fluctuations, and light exposure, enabling targeted drug release and promoting tissue regeneration. In tissue engineering, Stimuli-responsive cellulose hydrogels are used for the repair and regeneration of skin, bone, and other critical tissues. In drug delivery, they are optimized for oral, nasal, and ocular administration, as well as advanced cancer therapies. In addition, Stimuli-responsive cellulose hydrogels exhibit significant potential in disease diagnostics, particularly their conductive variants, which show promise in biosensing and diagnostic applications. However, despite their potential, challenges such as immune compatibility, long-term stability, and scalability in production remain barriers to clinical translation. Future research efforts should focus on multifunctional integration, advanced intelligent design, and enhanced stimulus responsiveness to fully unlock their potential in biomedical applications and facilitate their transition from laboratory research to practical use.

Antifreezing hydrogels: from mechanisms and strategies to applications

Antifreezing hydrogels have emerged as an innovative solution for maintaining functional performance and mechanical integrity in subzero environments, offering a robust alternative to traditional water-free antifreezing materials that often fail under wet and cold conditions. These water-rich hydrogels leverage their porous, crosslinked, polymeric networks, which serve as the structural basis for implementing two parallel strategies: the incorporation of antifreezing additives (peptides/proteins, salts, ionic liquids, and organics) and the meticulous engineering of polymer systems and network structures for manipulating the water-ice phase equilibrium to significantly enhance antifreezing properties. This review synthesizes recent findings to provide a fundamental overview of the important advancements in antifreezing hydrogels, focusing on their designs, mechanisms, performances, and functional applications. Various types of antifreezing hydrogels have been developed, utilizing strategies like the incorporation of antifreeze agents, use of strongly water-bound polymers, and design of highly crosslinked networks to illustrate different antifreezing mechanisms: freezing point depression, ice recrystallization inhibition, and network freezing inhibition. This review also explores the diverse functions of antifreezing hydrogels in biomedical devices, soft robotics, flexible electronics, food industry, and environmental engineering. Finally, this review concludes with future directions, emphasizing the potential of integrating machine learning and advanced molecular simulations into materials design. This strategic vision is aimed at promoting continuous innovation and progress in the rapidly evolving field of antifreezing hydrogels.

Advances in conducting nanocomposite hydrogels for wearable biomonitoring

Recent advancements in wearable biosensors and bioelectronics have led to innovative designs for personalized health management devices, with biocompatible conducting nanocomposite hydrogels emerging as a promising building block for soft electronics engineering. In this review, we provide a comprehensive framework for advancing biosensors using these engineered nanocomposite hydrogels, highlighting their unique properties such as high electrical conductivity, flexibility, self-healing, biocompatibility, biodegradability, and tunable architecture, broadening their biomedical applications. We summarize key properties of nanocomposite hydrogels for thermal, biomechanical, electrophysiological, and biochemical sensing applications on the human body, recent progress in nanocomposite hydrogel design and synthesis, and the latest technologies in developing flexible and wearable devices. This review covers various sensor types, including strain, physiological, and electrochemical sensors, and explores their potential applications in personalized healthcare, from daily activity monitoring to versatile electronic skin applications. Furthermore, we highlight the blueprints of design, working procedures, performance, detection limits, and sensitivity of these soft devices. Finally, we address challenges, prospects, and future outlook for advanced nanocomposite hydrogels in wearable sensors, aiming to provide a comprehensive overview of their current state and future potential in healthcare applications.

Extraction and incorporation of cellulose microfibers from textile wastes into MXene-enhanced PVA-borax hydrogel for multifunctional wearable sensors

Conductive hydrogel has drawn great concern in wearable sensors, human-machine interfaces, artificial intelligence (AI), health monitoring, et al. But it still remains challenge to develop hydrogel through facile and sustainable methods. In this work, a conductive, flexible, bendable and self-healing hydrogel (PBCM) composed of polyvinyl alcohol (PVA), borax, cellulose microfibers (CMFs) and MXene nanosheets was fabricated by a simple and efficient strategy. The carboxylated CMFs were extracted from waste ramie fibers via a one-pot ammonium persulfate oxidation method. The crystallinity and tensile strength were increased 70 % and 4 times due to the addition of CMFs and MXene compared to the pristine PVA-borax hydrogel. The incorporation of MXene nanosheets acts as multifunctional cross-linkers and energy transfer platform, promoting the electrical conductivity, stretchability and bendability of hydrogel remarkably. The PBCM-2 hydrogel exhibited the maximum electrical conductivity of 0.81 S/cm. Additionally, the dynamic borate ester linkage imparts self-healing ability to the hydrogel. The resulting PBCM-2 hydrogel demonstrated excellent resistance to fire and pH response properties. Moreover, it showed sensitivity in monitoring various human physiological movements, including finger, wrist, elbow, knee bending and drinking water, indicating its potential for wearable sensing applications like health care and sports training.

Preparation and performance study of sodium alginate/bamboo fiber/gelatin ionic conductive self-healing hydrogel

This study has been successfully developed the Sodium alginate/Bamboo fiber /Gelatin（SA/BF/Gel）composite conductive hydrogel with adhesive and self-healing properties. Through in-depth research, the influence of Gel content on the tensile, adhesive, self-healing properties, and conductivity of the SA/BF/Gel composite conductive hydrogel was discussed. The sensing performance and sensing mechanism of the material were also investigated, along with a preliminary exploration of its potential applications. An attempt was made to apply the SA/BF/Gel composite conductive hydrogel to 3D printing technology, establishing a connection between the rheological properties of the hydrogel and its printing structure. The addition of Gel significantly improved the flexibility of the hydrogel, with a conductivity of up to 3.12 S/m at a Gel content of 1.5 %. When employed as a sensor, the material exhibited high sensitivity (GF = 2.21) and excellent cyclic stability, rendering it suitable for a wide range of applications in real-time monitoring of bending movements of fingers and wrists, as well as dynamic contact and variations in contact forces on the hydrogel surface. The SA/BF/Gel composite conductive hydrogel has the potential to be utilized in a multitude of applications, including the development of smart wearable devices, the monitoring of individual human beings, and the integration of human beings and machines. Furthermore, the research findings associated with this hydrogel will provide a strong foundation for the advancement of materials science and the integration of smart technologies.

Hard- and Soft-Coded Strain Stiffening in Metamaterials via Out-of-Plane Buckling Using Highly Entangled Active Hydrogel Elements

Metamaterials show elaborate mechanical behavior such as strain stiffening, which stems from their unit cell design. However, the stiffening response is typically programmed in the design step and cannot be adapted postmanufacturing. Here, we show hydrogel metamaterials with highly programmable strain-stiffening responses by exploiting the out-of-plane buckling of integrated pH-switchable hydrogel actuators. The stiffening upon reaching a certain extension stems from the initially buckled active hydrogel beams. At low strain, the beams do not contribute to the mechanical response under tension until they straighten with a resulting step-function increase in stiffness. In the hydrogel actuator design, the acrylic acid concentration hard-codes the configuration of the metamaterial and range of possible stiffening onsets, while the pH soft-codes the exact stiffening onset point after fabrication. The utilization of out-of-plane buckling to realize subsequent stiffening without the need to deform the passive structure extends the application of hydrogel actuators in mechanical metamaterials. Our concept of out-of-plane buckled active elements that stiffen only under tension enables strain-stiffening metamaterials with high programmability before and after fabrication.

Tough, conductive hydrogels based on gelatin and oxidized sodium carboxymethyl cellulose as flexible sensors

Natural polymer-based hydrogels have been wildly used in electronic skin, health monitoring and human motion sensing. However, the construction of hydrogel with excellent mechanical strength and electrical conductivity totally using natural polymers still faces many challenges. In this paper, gelatin and oxidized sodium carboxymethylcellulose were used to synthesize a double-network hydrogel through the dynamic Schiff base bonds. Then, the mechanical strength of the hydrogel was further enhanced by immersing it in an ammonium sulfate solution based on the Hofmeister effect between gelatin and salt. Finally, the gelatin/oxidized sodium carboxymethylcellulose hydrogel exhibited high tensile properties (614 %), tensile fracture strength (2.6 MPa), excellent compressive fracture strength (64 MPa), and compressive toughness (4.28 MJ/m3). Also, the electrical conductivity reached 3.94 S/m. The hydrogel after salt soaked was fabricated as strain sensors, which could accurately monitor the movement of many joints in the human body, such as fingers, wrists, elbows, neck, and throat. Therefore, the designed hydrogel fully originated from natural polymers and has great application potential in motion detection and information recording.

Double cross-linked graphene oxide hydrogel for promoting healing of diabetic ulcers

This study explores the synthesis and characterization of a novel double cross-linked hydrogel composed of polyvinyl alcohol (PVA), sodium alginate (SA), graphene oxide (GO), and glutathione (GSH), henceforth referred to as PVA/SA/GO/GSH. This innovative hydrogel system incorporates two distinct types of cross-linking networks and is meticulously engineered to exhibit sensitivity to high glucose and/or reactive oxygen species (ROS) environments. A sequential approach was adopted in the hydrogel formation. The initial phase involved the absorption of GSH onto GO, which was subsequently functionalized with boric acid and polyethylene glycol derivatives via a bio-orthogonal click reaction. This stage constituted the formation of the first chemically cross-linked network. Subsequently, freeze-thaw cycles were utilized to induce a secondary cross-linking process involving PVA and SA, thereby forming the second physically cross-linked network. The resultant PVA/SA/GO/GSH hydrogel retained the advantageous hydrogel properties such as superior water retention capacity and elasticity, and additionally exhibited the ability to responsively release GSH under changes in glucose concentration and/or ROS levels. This feature finds particular relevance in the therapeutic management of diabetic ulcers. Preliminary in vitro evaluation affirmed the hydrogel's biocompatibility and its potential to promote cell migration, inhibit apoptosis, and exhibit antibacterial properties. Further in vivo studies demonstrated that the PVA/SA/GO/GSH hydrogel could facilitate the healing of diabetic ulcer sites by mitigating oxidative stress and regulating glucose levels. Thus, the developed PVA/SA/GO/GSH hydrogel emerges as a promising candidate for diabetic ulcer treatment, owing to its specific bio-responsive traits and therapeutic efficacy.

Chinese herb pollen derived micromotors as active oral drug delivery system for gastric ulcer treatment

Considerable efforts have been devoted to treating gastric ulcers. Attempts in this field tend to develop drug delivery systems with prolonged gastric retention time. Herein, we develop novel Chinese herb pollen-derived micromotors as active oral drug delivery system for treating gastric ulcer. Such Chinese herb pollen-derived micromotors are simply produced by asymmetrically sputtering Mg layer onto one side of pollen grains. When exposed to gastric juice, the Mg layer can react with the hydrogen ions, resulting in intensive generation of hydrogen bubbles to propel the micromotors. Benefiting from the autonomous motion and unique spiny structure, our micromotors can move actively in the stomach and adhere to the surrounding tissues. Besides, their special architecture endows the micromotors with salient capacity of drug loading and releasing. Based on these features, we have demonstrated that our Chinese herb pollen-derived micromotors could effective deliver berberine hydrochloride and show desirable curative effect on the gastric ulcer model of mice. Therefore, these Chinese herb pollen-derived micromotors are anticipated to serve as promising oral drug delivery carriers for clinical applications.

Effects of mechanical properties of carbon-based nanocomposites on scaffolds for tissue engineering applications: a comprehensive review

Mechanical properties, such as elasticity modulus, tensile strength, elongation, hardness, density, creep, toughness, brittleness, durability, stiffness, creep rupture, corrosion and wear, a low coefficient of thermal expansion, and fatigue limit, are some of the most important features of a biomaterial in tissue engineering applications. Furthermore, the scaffolds used in tissue engineering must exhibit mechanical and biological behaviour close to the target tissue. Thus, a variety of materials has been studied for enhancing the mechanical performance of composites. Carbon-based nanostructures, such as graphene oxide (GO), reduced graphene oxide (rGO), carbon nanotubes (CNTs), fibrous carbon nanostructures, and nanodiamonds (NDs), have shown great potential for this purpose. This is owing to their biocompatibility, high chemical and physical stability, ease of functionalization, and numerous surface functional groups with the capability to form covalent bonds and electrostatic interactions with other components in the composite, thus significantly enhancing their mechanical properties. Considering the outstanding capabilities of carbon nanostructures in enhancing the mechanical properties of biocomposites and increasing their applicability in tissue engineering and the lack of comprehensive studies on their biosafety and role in increasing the mechanical behaviour of scaffolds, a comprehensive review on carbon nanostructures is provided in this study.

Fundamental properties of smart hydrogels for tissue engineering applications: A review

Tissue engineering is an advanced and potential biomedical approach to treat patients suffering from lost or failed an organ or tissue to repair and regenerate damaged tissues that increase life expectancy. The biopolymers have been used to fabricate smart hydrogels to repair damaged tissue as they imitate the extracellular matrix (ECM) with intricate structural and functional characteristics. These hydrogels offer desired and controllable qualities, such as tunable mechanical stiffness and strength, inherent adaptability and biocompatibility, swellability, and biodegradability, all crucial for tissue engineering. Smart hydrogels provide a superior cellular environment for tissue engineering, enabling the generation of cutting-edge synthetic tissues due to their special qualities, such as stimuli sensitivity and reactivity. Numerous review articles have presented the exceptional potential of hydrogels for various biomedical applications, including drug delivery, regenerative medicine, and tissue engineering. Still, it is essential to write a comprehensive review article on smart hydrogels that successfully addresses the essential challenging issues in tissue engineering. Hence, the recent development on smart hydrogel for state-of-the-art tissue engineering conferred progress, highlighting significant challenges and future perspectives. This review discusses recent advances in smart hydrogels fabricated from biological macromolecules and their use for advanced tissue engineering. It also provides critical insight, emphasizing future research directions and progress in tissue engineering.

A Novel Superparamagnetic Multifunctional Nerve Scaffold: A Remote Actuation Strategy to Boost In Situ Extracellular Vesicles Production for Enhanced Peripheral Nerve Repair

Extracellular vesicles (EVs) have inherent advantages over cell-based therapies in regenerative medicine because of their cargos of abundant bioactive cues. Several strategies are proposed to tune EVs production in vitro. However, it remains a challenge for manipulation of EVs production in vivo, which poses significant difficulties for EVs-based therapies that aim to promote tissue regeneration, particularly for long-term treatment of diseases like peripheral neuropathy. Herein, a superparamagnetic nanocomposite scaffold capable of controlling EVs production on-demand is constructed by incorporating polyethyleneglycol/polyethyleneimine modified superparamagnetic nanoparticles into a polyacrylamide/hyaluronic acid double-network hydrogel (Mag-gel). The Mag-gel is highly sensitive to a rotating magnetic field (RMF), and can act as mechano-stimulative platform to exert micro/nanoscale forces on encapsulated Schwann cells (SCs), an essential glial cell in supporting nerve regeneration. By switching the ON/OFF state of the RMF, the Mag-gel can scale up local production of SCs-derived EVs (SCs-EVs) both in vitro and in vivo. Further transcriptome sequencing indicates an enrichment of transcripts favorable in axon growth, angiogenesis, and inflammatory regulation of SCs-EVs in the Mag-gel with RMF, which ultimately results in optimized nerve repair in vivo. Overall, this research provides a noninvasive and remotely time-scheduled method for fine-tuning EVs-based therapies to accelerate tissue regeneration, including that of peripheral nerves.

Recent advances in double network hydrogels based on naturally-derived polymers: synthesis, properties, and biological applications

Hydrogels composed of naturally-derived biopolymers have garnered significant research interest due to the bioavailability and biocompatibility of starting materials. However, translating these advantages to practical use is challenged by limitations of mechanical properties and stability of the resulting materials. The development of double network (DN) hydrogels has led to greatly enhanced mechanical properties and shows promise toward broadening the applications of conventional synthetic or natural hydrogels. This review highlights recently developed protein-based and polysaccharide-based DN hydrogels. For each biopolymer, we focus on a subset of DN hydrogels centered around a theme related to synthetic design or applications. Network structures and crosslinking mechanisms that endow enhanced mechanical properties and performance to the materials are discussed. Important applications, including tissue engineering, drug delivery, bioadhesives, wound healing, and wearable sensors, that arise from the inherent properties of the natural polymer or its combination with other materials are also emphasized. Finally, we discuss ongoing challenges to stimulate the discovery of new design principles for the future of DN hydrogels based on naturally-derived polymers for biological applications.

Polysaccharide-Based Double-Network Hydrogels: Polysaccharide Effect, Strengthening Mechanisms, and Applications

Polysaccharides are carbohydrate polymers that are major components of plants, animals, and microorganisms, with unique properties. Biological hydrogels are polymeric networks that imbibe and retain large amounts of water and are the major components of living organisms. The mechanical properties of hydrogels are critical for their functionality and applications. Since synthetic polymeric double-network (DN) hydrogels possess unique network structures with high and tunable mechanical properties, many natural functional polysaccharides have attracted increased attention due to their rich and convenient sources, unique chemical structure and chain conformation, inherently desirable cytocompatibility, biodegradability and environmental friendliness, diverse bioactivities, and rheological properties, which rationally make them prominent constituents in designing various strong and tough polysaccharide-based DN hydrogels over the past ten years. This review focuses on the latest developments of polysaccharide-based DN hydrogels to comprehend the relationship among the polysaccharide properties, inner strengthening mechanisms, and applications. The aim of this review is to provide an insightful mechanical interpretation of the design strategy of novel polysaccharide-based DN hydrogels and their applications by introducing the correlation between performance and composition. The mechanical behavior of DN hydrogels and the roles of varieties of marine, microbial, plant, and animal polysaccharides are emphatically explained.

A multifunctional sensor for real-time monitoring and pro-healing of frostbite wounds

Flexible epidermal sensors based on conductive hydrogels hold great promise for various applications, such as wearable electronics and personal healthcare monitoring. However, the integration of conductive hydrogel epidermal sensors into multiple applications remains challenging. In this study, a multifunctional PAAm/PEG/hydrolyzed keratin (Hereinafter referred to as HK)/MXene conductive hydrogel (PPHM hydrogel) was designed as a high-performance therapeutic all-in-one epidermal sensor. This sensor not only accelerates wound healing but also provides wearable human-computer interaction. The developed sensor possesses highly sensitive sensing properties (Gauge Factor = 4.82 at high strain), strong mechanical tensile properties (capable of achieving a maximum elongation at break of 600 %), rapid self-healing capability, stable self-adhesive capability, biocompatibility, freeze resistance at -20 °C, and adjustable photo-thermal conversion capability. This therapeutic all-in-one sensor can sensitively monitor human movements, enabling the detection of small electrophysiological signals for diagnosing relevant activities and diseases. Furthermore, using a rat frostbite model, we demonstrated that the composite hydrogel sensor can serve as an effective wound dressing to accelerate the healing process. This study serves as a valuable reference for the development of multifunctional flexible epidermal sensors for personal smart health monitoring. STATEMENT OF SIGNIFICANCE: Accelerated wound healing reduces the risk of wound infection, and conductive hydrogel-based sensors can monitor physiological signals. The multifunctional application of conductive hydrogel sensors combined with wound diagnostic and therapeutic capabilities can meet personalized medical requirements for wound healing and sensor monitoring. The aim of this study is to develop a multifunctional hydrogel patch. The multifunctional hydrogel can be assembled into a flexible wearable high-performance diagnostic and therapeutic integrated sensor that can effectively accelerate the healing of frostbite wounds and satisfy the real-time monitoring of multi-application scenarios. We expect that this study will inform efforts to integrate wound therapy and sensor monitoring.

A Simple and Effective Physical Ball-Milling Strategy to Prepare Super-Tough and Stretchable PVA@MXene@PPy Hydrogel for Flexible Capacitive Electronics

Biomimetic flexible electronics for E-skin have received increasing attention, due to their ability to sense various movements. However, the development of smart skin-mimic material remains a challenge. Here, a simple and effective approach is reported to fabricate super-tough, stretchable, and self-healing conductive hydrogel consisting of polyvinyl alcohol (PVA), Ti3 C2 Tx MXene nanosheets, and polypyrrole (PPy) (PMP hydrogel). The MXene nanosheets and Fe3+ serve as multifunctional cross-linkers and effective stress transfer centers, to facilitate a considerable high conductivity, super toughness, and ultra-high stretchability (elongation up to 4300%) for the PMP hydrogel with. The hydrogels also exhibit rapid self-healing and repeatable self-adhesive capacity because of the presence of dynamic borate ester bond. The flexible capacitive strain sensor made by PMP hydrogel shows a relatively broad range of strain sensing (up to 400%), with a self-healing feature. The sensor can precisely monitor various human physiological signals, including joint movements, facial expressions, and pulse waves. The PMP hydrogel-based supercapacitor is demonstrated with a high capacitance retention of ≈92.83% and a coulombic efficiency of ≈100%.

Near-Infrared-II-Driven Pollen Micromotors for Inflammatory Bowel Disease Treatment

Inflammatory bowel disease (IBD) is a common inflammatory bowel disease with a high incidence rate and serious consequences. Attempts in this area are focusing on developing efficient delivery systems for relieving IBD. Herein, we present a kind of near-infrared-II (NIR-II)-activated pollen-derived micromotor (PDMM) as an efficient delivery system for treating IBD. These PDMMs are pollen grains with half of them covered by a gold (Au) layer, which can result in an asymmetric thermal gradient around the PDMMs under NIR-II irradiation, thereby forming a thermophoretic force to drive PDMMs to move spontaneously. Besides, the inherent spiny and hollow architectures of pollen grains endowed the PDMMs with outstanding capacity of adherence and drug delivery, respectively. Based on these features, we have demonstrated that the PDMMs could move actively in vivo with the irradiation of NIR-II light and adhere to the surrounding tissues for drug delivery. Thus, the PDMMs loaded with dexamethasone show desirable curative effects on treating IBD. These results indicated that the proposed PDMM-based delivery system has great potential in clinic gastrointestinal administration.

Multifunctional acetylated distarch phosphate based conducting hydrogel with high stretchability, ultralow hysteresis and fast response for wearable strain sensors

The rapid development of flexible sensors has greatly increased the demand for high-performance hydrogels. However, it remains a challenge to fabricate flexible hydrogel sensors with high stretching, low hysteresis, excellent adhesion, good conductivity, sensing characteristics and bacteriostatic function in a simple way. Herein, a highly conducting double network hydrogel is presented by incorporating lithium chloride (LiCl) into the hydrogel consisting of poly (2-acrylamide-2-methylpropanesulfonic acid/acrylamide/acrylic acid) (3A) network and acetylated distarch phosphate (ADSP). The addition of ADSP not only formed hydrogen bonds with 3A to improve the toughness of the hydrogel but also plays the role of "physical cross-linking" in 3A by "anchoring" the polymer molecular chains together. Tuning the composition of the hydrogel allows the attainment of the best functions, such as high stretchability (∼770 %), ultralow hysteresis (2.2 %, ε = 100 %), excellent electrical conductivity (2.9 S/m), strain sensitivity (GF = 3.0 at 200-500 % strain) and fast response (96 ms). Based on the above performance, the 3A/ADSP/LiCl hydrogel strain sensor can repeatedly and stably detect and monitor large-scale human movements and subtle sensing signals. In addition, the 3A/ADSP/LiCl hydrogel shows a good biocompatibility and bacteriostatic ability. This work provides an effective strategy for constructing the conductive hydrogels for wearable devices and flexible sensors.

Highly conductive and tough polyacrylamide/sodium alginate hydrogel with uniformly distributed polypyrrole nanospheres for wearable strain sensors

Conductive hydrogels have attracted widespread attention because of their integrated characteristics of being stretchable, deformable, adhesive, self-healable, and conductive. Herein, we report a highly conductive and tough double-network hydrogel based on a double cross-linked polyacrylamide (PAAM) and sodium alginate (SA) network with conducting polypyrrole nanospheres (PPy NSs) uniformly distributed in the network (PAAM-SA-PPy NSs). SA was employed as a soft template for synthesis of PPy NSs and distribution of PPy NSs uniformly in the hydrogel matrix to construct SA-PPy conductive network. The PAAM-SA-PPy NS hydrogel exhibited both high electrical conductivity (6.44 S/m) and excellent mechanical properties (tensile strength of 560 kPa at 870 %), as along as high toughness, high biocompatibility, good self-healing and adhesion properties. The assembled strain sensors showed high sensitivity and a wide sensing range (a gauge factor of 1.89 for 0-400 % strain and 4.53 for 400-800 % strain, respectively), as well as fast responsiveness and reliable stability. When used as a wearable strain sensor, it was able to monitor a series of physical signals from human large-scale joint motions and subtle muscle movements. This work provides a new strategy for the development of electronic skins and flexible strain sensors.

Pathways toward wearable and high-performance sensors based on hydrogels: toughening networks and conductive networks

Wearable hydrogel sensors provide a user-friendly option for wearable electronics and align well with the existing manufacturing strategy for connecting and communicating with large numbers of Internet of Things devices. This is attributed to their components and structures, which exhibit exceptional adaptability, scalability, bio-compatibility, and self-healing properties, reminiscent of human skin. This review focuses on the recent research on principal structural elements of wearable hydrogels: toughening networks and conductive networks, highlighting the strategies for enhancing mechanical and electrical properties. Wearable hydrogel sensors are categorized for an extensive exploration of their composition, mechanism, and design approach. This review provides a comprehensive understanding of wearable hydrogels and offers guidance for the design of components and structures in order to develop high-performance wearable hydrogel sensors.

A liquid metal/carbon nanotubes complex enabling ultra-fast polymerization of super-robust, stretchable adhesive hydrogels for highly sensitive sensor

Carbon nanotubes (CNTs) usually served as conductive and reinforcing nanofillers for making nanocomposites have never been reported to play a role in accelerating fabrication of hydrogels. Herein, we report an important discovery that by involving CNTs and liquid metal (LM) to form a complex (LM@CNTs), multifunctional hydrogels are rapidly prepared from vinyl monomers without heating or adding any initiators and crosslinkers. Study results demonstrate that LM@CNTs not only performs as both initiator and crosslinker for synthesizing hydrogels, but also dramatically reduces the polymerization duration from 3 days to minute levels, compared with that of only LM involved in hydrogel fabrication. Specifically, the complex initiates (<60 s) and crosslinks (<8min) monomers to form the high-performance hydrogels, which significantly reduces energy consumptions. The resulting polyacrylic acid (PAA) hydrogel possesses super stretchability (∼1200 %), high tensile strength (0.96 MPa), outstanding strain sensitivity (Gauge factor = 15.40 at 300-500 % strain), and excellent adhesion to various substrate surfaces. Additionally, the injectable molding performance will benefit the mass production of the hydrogels, which exhibits great potential for applications of wearable flexible sensors. This study provides an environmentally friendly, rapid polymerization, and energy-saving strategy by effectively applying nano-fillers for viable fabrication and application of multifunctional hydrogels.

Dual-network polyvinyl alcohol/polyacrylamide/xanthan gum ionic conductive hydrogels for flexible electronic devices

Ionic conductive hydrogels (ICHs) have received widespread attention as an ideal candidate for flexible electronic devices. However, conventional ICHs failed in widespread applications due to their inability to simultaneously possess high toughness, high ionic conductivity, and anti-freezing properties. Here, polyvinyl alcohol (PVA) and polyacrylamide (PAAm) were first dissolved in the zinc chloride solution, in which zinc ions (Zn²⁺) act as ionic cross-linkers and conducting ions, followed by the introduction of xanthan gum (XG) with a unique structure of trisaccharide side chains into the PVA/PAAm semi-interpenetrating network to prepare a dual-network ICHs (refers as PPXZ). Enabled by the synergistic effect of intermolecular chemical covalent cross-linking and physical cross-linking, PPXZ hydrogels exhibit significantly improved mechanical properties without sacrificing electrical conductivity. Furthermore, PPXZ hydrogels are successfully applied to flexible electronic devices, such as strain sensors and zinc ion hybrid supercapacitors, exhibiting satisfactory sensing sensitivity and cycling stability at a wide temperature range, respectively. Even at a high current density (10 A g^-1), the capacity of the supercapacitor retains 88.24 % after 10,000 cycles. This strategy provides new insight for ICHs in wide temperature-applied flexible electronic devices.

Highly biocompatible Ag nanocluster-reinforced wound dressing with long-term and synergistic bactericidal activity

Clinical application of antibiotic-free agents like silver nanoparticle-derived materials remains a critical challenge due to their limited long-term antibacterial activity and potential system toxicity. Herein, a highly biocompatible Ag nanocluster-reinforced hydrogel with enhanced synergistic antibacterial ability has been developed. Specifically, bioactive curcumin was incorporated into lysozyme-protected ultrasmall Ag nanoclusters (LC-AgNCs) and further integrated with sodium alginate (Sa) hydrogel (LC-AgNCs@Sa) through multiple interaction forces. Due to the synergistic antibacterial activity, LC-AgNCs could effectively kill both S. aureus and E. coli bacteria with a concentration down to 2.5 μg mL^-1. In-depth mechanism investigations revealed that the bactericidal effect of LC-AgNCs lies in their bacterial membrane destruction, reactive oxygen species (ROS) production, glutathione depletion and prooxidant-antioxidant system disruption ability. Curcumin can mediate the intracellular ROS balance to protect NIH 3T3 cells from oxidative stress and improve the biocompatibility of LC-AgNCs@Sa. LC-AgNCs@Sa with long-term antibacterial ability can effectively protect the wound from bacterial invasion in vivo, and significantly accelerate the wound healing process due to their distinctive functions of inhibiting inflammatory factor (TNF-α) production, promoting collagen deposit and facilitating re-epithelization. This study provides a new, versatile strategy for the design of high-performance antibacterial dressing for broad infectious disease therapy.

High-Performance Zwitterionic Organohydrogel Fiber in Bioelectronics for Monitoring Bioinformation

Bioinformation plays an imperative role in day-to-day life. Wearable bioelectronics are important for sensing bioinformation in real-time and conductive hydrogel fibers are a key component in next generation wearable bioelectronics. However, current conductive hydrogel fibers have remarkable disadvantages such as insufficient conductivity, stability, and bioinformation sensing ability. Here, we report the synthesis of a zwitterionic organohydrogel (ZOH) fiber by the combination of the mold method and solvent replacement strategy. The ZOH fiber shows transparency (92.1%), stretchability (905.8%), long-term stability, anti-freezing ability (-35-60 °C), and low light transmission loss (0.17 dB/cm). Then, we integrate the ZOH fiber into fabric for use as a bioinformation sensor, the results prove its capability as a bioinformation monitor, monitoring information such as motion and bioelectric signals. In addition, the potential of the ZOH fiber in optogenetic applications is also confirmed.

Tailoring Functional Micromotors for Sensing

Micromotors are identified as a promising candidate in the field of sensing benefiting from their capacity of autonomous movement. Here, a review on the development of tailoring micromotors for sensing is presented, covering from their propulsion mechanisms and sensing strategies to applications. First, we concisely summarize the propulsion mechanism of micromotors involving fuel-based propulsion and fuel-free propulsion introducing their principles. Then, emphasis is laid to the sensing stratagems of the micromotors including speed-based sensing strategy, fluorescence-based sensing strategy, and other strategies. We listed typical examples of different sensing stratagems. After that, we introduce the applications of micromotors in sensing fields including environmental science, food safety, and biomedical fields. Finally, we discuss the challenges and prospects of the micromotors tailored for sensing. We believe that this comprehensive review can help readers to catch the research frontiers in the field of sensing and thus to burst out new ideas.

Plasmonic nanogels for naked-eye sensing of food adulterants

Cellulose based nanoplasmonic sensors gained immense attention for various applications due to their advantageous physicochemical characteristics such as ease of fabrication, low density, chirality, surface functionalization and disposal. Herein, a hydrogel based nanoplasmonic sensor probe was fabricated and evaluated for the detection of melamine (MA). Plasmonic nanomaterials (AuNPs) were synthesized by the redox reaction using a dual reducing agent (β-cyclodextrin (βCD) and citrate). The physicochemical characteristics of the synthesized AuNPs were extensively determined by various spectroscopic and microscopic techniques. The colorimetric sensing of melamine (MA) was carried out in solution and hydrogel phases. Upon the addition of MA, AuNPs tend to aggregate and exhibit color changes from orange-red to purple due to surface plasmon resonance (SPR) coupling. This nanosensor probe showed high selectivity and sensitivity for detection of MA with a detection limit of 3 × 10^-7 M. Plasmonic hydrogels were prepared using the cellulose acetate (CA) polymer and optimized for stability and interaction with melamine. The βCD-citrate stabilized AuNPs showed color changes with the CA hydrogels. The hydrogel-based sensor probe exhibits similar characteristics with respect to the selective and sensitive detection of MA under optimized conditions. The fabricated nanoreactor based sensor probe has high potential for food sensor applications.

Molecular Dynamics-Assisted Design of High Temperature-Resistant Polyacrylamide/Poloxamer Interpenetrating Network Hydrogels

Polyacrylamide has promising applications in a wide variety of fields. However, conventional polyacrylamide is prone to hydrolysis and thermal degradation under high temperature conditions, resulting in a decrease in solution viscosity with increasing temperature, which limits its practical effect. Herein, combining molecular dynamics and practical experiments, we explored a facile and fast mixing strategy to enhance the thermal stability of polyacrylamide by adding common poloxamers to form the interpenetrating network hydrogel. The blending model of three synthetic polyacrylamides (cationic, anionic, and nonionic) and poloxamers was first established, and then the interaction process between them was simulated by all-atom molecular dynamics. In the results, it was found that the hydrogen bonding between the amide groups on all polymers and the oxygen-containing groups (ether and hydroxyl groups) on poloxamers is very strong, which may be the key to improve the high temperature resistance of the hydrogel. Subsequent rheological tests also showed that poloxamers can indeed significantly improve the stability and viscosity of nonionic polyacrylamide containing only amide groups at high temperatures and can maintain a high viscosity of 3550 mPa·S at 80 °C. Transmission electron microscopy further showed that the nonionic polyacrylamide/poloxamer mixture further formed an interpenetrating network structure. In addition, the Fourier transform infrared test also proved the existence of strong hydrogen bonding between the two polymers. This work provides a useful idea for improving the properties of polyacrylamide, especially for the design of high temperature materials for physical blending.

Shear-flow-induced graphene coating microfibers from microfluidic spinning

The advancements in flexible electronics call for invention of fiber-based electronic systems by surface modification or encapsulation. Here we present novel shear-flow-induced graphene nanosheets coating microfibers by integrating the dip coating approach with the microfluidic spinning method. The core hydrogel microfiber was first spun continuously from the microfluidic device, and the shear flow from the dip coating approach allowed formation of the thin graphene oxide (GO) nanosheet coating shell. Because the fluid components and flow rates in the microfluidic spinning together with the lifting speed in the dip coating approach are highly controllable, the morphology of the resultant microfibers could be precisely tailored, including the core-shell structure, conductivity, and thermal responsibilities. These features equipped the resultant microfibers with the potential of thermal and motion sensors, and their value in gesture indicators has also been explored. Microfibers generated from such a simple and controllable method could be versatile in flexible electronics.

Design of asymmetric-adhesion lignin reinforced hydrogels with anti-interference for strain sensing and moist air induced electricity generator

Flexible hydrogels with integration of excellent mechanical and electrical properties are well suited for applications as wearable electronic sensors, and others. Self-adhesion is an important feature of wearable sensors. However, the usual isotropic- adhesion hydrogels have the drawback of poor anti-interference, which negatively affects their applications. In this study, we developed asymmetric-adhesion and tough lignin reinforced hydrogels in a facile two-step process: 1) PAA hydrogels, with lignin as the binder and conductive filler, were first prepared; 2) the asymmetric-adhesion property was imparted to lignin reinforced hydrogel by simple soaking of the top portion of the hydrogel in CaCl₂ solution. The as-obtained asymmetric-adhesion lignin reinforced hydrogel was assembled into a wearable sensor, which shows excellent anti-interference and accurate and stable collections of sensing signals, with its gauge factor (GF) of 2.51 (in the strain range of 0-51.5%). In addition, the tough hydrogel is capable of generating electricity upon moist air sweeping through it, showing excellent energy conversion capabilities, with open-circuit voltage of as high as 306.6 mV. These results provided new prospects for the application of polyelectrolyte hydrogel materials in the fields of wet-to-electric conversion and wearable electronic sensors.

Lignin reinforced hydrogels with fast self-recovery, multi-functionalities via calcium ion bridging for flexible smart sensing applications

Hydrogels have found applications in many different fields. However, poor mechanical properties, such as low elasticity and lack of rapid recovery under large deformation, can severely limit their applications. In this study, we developed lignin reinforced hydrogels made of calcium ion containing ternary polymers (lignosulfonate (LS), alginate (Alg), and polyacrylic acid (PAA)). The resultant hydrogel has excellent elasticity, rapid self-recovery, and multi-functionalities. The covalent PAA network acts as the elastic scaffold of hydrogel, while calcium bridging networks of LS, Alg, and PAA, as well as the strong hydrogen bonding network in the system, function as sacrifice bonds to dissipate energy and transfer stress. The PAA/LS/Alg/Ca hydrogels exhibit rapid and durable elastic recovery ability under large deformation with the highest compressive stress of 835 kPa (95% strain), highest tensile fracture stress of 357 kPa, and highest tensile strain of 1144%. In addition, these tough hydrogels show UV resistance, self-healing, antifreeze, and excellent electro-conductivity. When assembled into a strain sensor, stable and reliable electrical responses with 375 ms response time are demonstrated. The PAA/LS/Alg/Ca hydrogel strain sensors can monitor human movements with responsive and accurate physiological signals. These results support the conclusion that the PAA/LS/Alg/Ca hydrogel strain sensors have great application potential in flexible wearable electronics and smart devices.

Gelatin-Reinforced Zwitterionic Organohydrogel with Tough, Self-Adhesive, Long-Term Moisturizing and Antifreezing Properties for Wearable Electronics

Strong mechanical performance, appropriate adhesion capacity, and excellent biocompatibility of conductive hydrogel-based sensors are of great significance for their application. However, conventional conductive hydrogels usually exhibit insufficient mechanical strength and adhesion. In addition, they will lose flexibility and conductivity under subzero temperature and a dry environment owing to inevitable freezing and evaporation of water. In this study, a tough, flexible, self-adhesive, long-term moisturizing, and antifreezing organohydrogel was prepared, which was composed of gelatin, zwitterionic poly [2-(methacryloyloxy) ethyl] dimethyl-(3-sulfopropyl) (PSBMA), MXene nanosheets, and glycerol. Natural gelatin was incorporated to enhance mechanical performance via the entanglement of a physical cross-linked network and a PSBMA network, which was also used as a stabilizer to disperse MXene into the organohydrogel. Zwitterionic PSBMA endowed the organohydrogel with good adhesion and self-healing properties. Long-term moisturizing properties and antifreeze tolerance could be achieved owing to the synergistic water retention capacity of PSBMA and glycerol. The resulting PSBMA-gelatin-MXene-glycerol (PGMG) organohydrogel exhibited high mechanical fracture strength (0.65 MPa) and stretchability (over 1000%), excellent toughness (3.87 MJ/m³), strong and repeated adhesion to diverse substrates (e.g., paper, glass, silicon rubber, iron, and pig skin), good fatigue resistance (under the cyclic stretching-releasing process), and rapid recovery capacity. Moreover, the PGMG organohydrogel showed good stability under -40 °C. The sensor based on PGMG organohydrogel could tightly attach to the human skin and real-time-monitor the motions of joints (e.g., bending of the finger, wrist, elbow, and knee) and the change in mood such as smiling and frowning. Therefore, PGMG organohydrogels have a huge potential for wearable sensors under room temperature or extreme environments.

Flexible organohydrogel ionic skin with Ultra-Low temperature freezing resistance and Ultra-Durable moisture retention

HYPOTHESIS

One prevailing method to construct excellent temperature tolerance/long-lasting moisture hydrogels is to couple the original hydrogel networks with freezing-tolerant/moisture retaining agents, including ionic liquids, inorganic salts, zwitterionic osmolytes, and polyhydric alcohols. Among them, organohydrogels have shed new light on the development of ionic skins with long-term usability and stable sensing performance at subzero temperatures due to their long-lasting water retention and anti-freezing capability.

EXPERIMENTS

We report a dual network organohydrogel by doping conductive ZnSO₄ into the double network hydrogel of polyvinyl alcohol-polyacrylamide (PVA-PAM) with subsequent immersing in a mixed solvent of ethylene glycol (EG) and H₂O. The anti-freezing and moisture retaining abilities of the PVA/PAM/Zn/EG (PPZE) organohydrogel were studied and the sensing performances of the PPZE organohydrogel-based ionic skin were investigated.

FINDINGS

The organohydrogel exhibits a high conductivity (0.44 S m^-1), excellent fatigue resistance and exceptional moisture retaining ability with more than 99.3% of the initial weight retention after 31 days storage at ambient temperature. Importantly, the PPZE organohydrogel-based ionic skin shows an ultra-low temperature anti-freezing ability and remains flexibility and sensing capability with a high sensitivity (signal response time ∼ 0.23 s) even at -50 °C. The PPZE organohydrogel demonstrates a tremendous potential in artificial skin and health monitoring.

A wide-temperature-range sensor based on wide-strain-range self-healing and adhesive organogels

Adaptable physicochemically double cross-linked network organogels for use at different temperatures are demonstrated.

Low-Temperature Wearable Strain Sensor Based on a Silver Nanowires/Graphene Composite with a Near-Zero Temperature Coefficient of Resistance

Currently, the exploration of wearable strain sensors that can work under subzero temperatures while simultaneously possessing anti-interference capability toward temperature is still a grand challenge. Herein, we present a low-temperature wearable strain sensor that is constructed via the incorporation of a Ag nanowires/graphene (Ag NWs/G) composite into the polydimethylsiloxane (PDMS) polymer. The Ag NWs/G/PDMS strain sensor exhibits promising flexibility at a very low temperature (-40 °C), outstanding fatigue resistance with low hysteresis energy, and near-zero temperature coefficient of resistance (TCR). The Ag NWs/G/PDMS strain sensor shows excellent sensing performance under subzero temperatures with a very high gauge factor of 9156 under a strain of >36%, accompanied by a noninterference characteristic to temperature (-40 to 20 °C). The Ag NWs/G/PDMS strain sensor also demonstrates the feasibility of monitoring various human movements such as finger bending, arm waving, wrist rotation, and knee bending under both room temperature and low-temperature conditions. This work initiates a new promising strategy to construct next-generation wearable strain sensors that can work stably and effectively under very low temperatures.

Self-Healing Mechanism and Conductivity of the Hydrogel Flexible Sensors: A Review

Sensors are devices that can capture changes in environmental parameters and convert them into electrical signals to output, which are widely used in all aspects of life. Flexible sensors, sensors made of flexible materials, not only overcome the limitations of the environment on detection devices but also expand the application of sensors in human health and biomedicine. Conductivity and flexibility are the most important parameters for flexible sensors, and hydrogels are currently considered to be an ideal matrix material due to their excellent flexibility and biocompatibility. In particular, compared with flexible sensors based on elastomers with a high modulus, the hydrogel sensor has better stretchability and can be tightly attached to the surface of objects. However, for hydrogel sensors, a poor mechanical lifetime is always an issue. To address this challenge, a self-healing hydrogel has been proposed. Currently, a large number of studies on the self-healing property have been performed, and numerous exciting results have been obtained, but there are few detailed reviews focusing on the self-healing mechanism and conductivity of hydrogel flexible sensors. This paper presents an overview of self-healing hydrogel flexible sensors, focusing on their self-healing mechanism and conductivity. Moreover, the advantages and disadvantages of different types of sensors have been summarized and discussed. Finally, the key issues and challenges for self-healing flexible sensors are also identified and discussed along with recommendations for the future.

Stretchable and Conductive Composite Structural Color Hydrogel Films as Bionic Electronic Skins

Electronic skins have received increasing attention in biomedical areas. Current efforts about electronic skins are focused on the development of multifunctional materials to improve their performance. Here, the authors propose a novel natural-synthetic polymers composite structural color hydrogel film with high stretchability, flexibility, conductivity, and superior self-reporting ability to construct ideal multiple-signal bionic electronic skins. The composite hydrogel film is prepared by using the mixture of polyacrylamide (PAM), silk fibroin (SF), poly(3,4-ethylenedioxythiophene):poly (4-styrene sulfonate) (PEDOT:PSS, PP), and graphene oxide (GO) to replicate colloidal crystal templates and construct inverse opal scaffolds, followed by subsequent acid treatment. Due to these specific structures and components, the resultant film is imparted with vivid structural color and high conductivity while retaining the composite hydrogel's original stretchability and flexibility. The authors demonstrate that the composite hydrogel film has obvious color variation and electromechanical properties during the stretching and bending process, which could thus be utilized as a multi-signal response electronic skin to realize real-time color sensing and electrical response during human motions. These features indicate that the proposed composite structural color hydrogel film can widen the practical value of bionic electronic skins.

Ultra-Sensitive and Ultra-Stretchable Strain Sensors Based on Emulsion Gels with Broad Operating Temperature

Hydrogels with mechanical elasticity and conductivity are ideal materials in wearable devices. However, traditional hydrogels are fragile upon mechanical loading and lose functions in climate change because the internal water undergoes freeze and dehydration. Herein, we synthesize stable emulsions at high and low temperatures by introducing glycerol into the W/W emulsions. Then the high-stable emulsions are used as templates to produce the freestanding emulsion gels with enhanced mechanical strength and conductivity. The introduction of glycerol endows emulsions and emulsion gels with high and low temperature resistance (-20 to 90 °C). The fabricated strain sensors based on emulsion gels show high sensitivity (gauge factor=6.240), high stretchability (1081 %), fatigue resistance, self-healing and adhesion properties, realizing the repeatable and accurate detection of various human motions. These high-performance and eco-friendly emulsion gels can be promising candidates for next-generation artificial skin and human-machine interface.

Rapid Photothermal Responsive Conductive MXene Nanocomposite Hydrogels for Soft Manipulators and Sensitive Strain Sensors

Stimulus-responsive hydrogels are of great significance in soft robotics, wearable electronic devices, and sensors. Near-infrared (NIR) light is considered an ideal stimulus as it can trigger the response behavior remotely and precisely. In this work, a smart flexible stimuli-responsive hydrogel with excellent photothermal property and decent conductivity are prepared by incorporating MXene nanosheets into the physically cross-linked poly(N-isopropyl acrylamide) hydrogel matrix. Because of outstanding photothermal effect and dispersion of MXene, the composite hydrogel exhibits rapid photothermal responsiveness and excellent photothermal stability under the NIR irradiation. Furthermore, the anisotropic bilayer hydrogel actuator shows fast and controllable light-driven bending behavior, which can be used as a light-controlled soft manipulator. Meanwhile, the hydrogel sensor exhibits cycling stability and good durability in detecting various deformation and real-time human activities. Therefore, the present study involving the fabrication of MXene nanocomposite hydrogels for potential applications in remotely controlled actuator and wearable electronic device provides a new method for the development of photothermal responsive conductive hydrogels.

Self-adhesive and contractile silk fibroin/graphene nano-ionotronic skin for strain sensing of irregular surfaces

Nanofiber-based artificial skin has shown promise for application in flexible wearable electronics due to its favorable breathability and comfortable wearability. However, the electrospinning method commonly used for nanofiber preparation suffers from poor spinning performance when used for ionotronic solutions. Moreover, the resulting membrane usually lacks self-adhesive and self-adapting properties when it is attached to an irregular subject, which greatly hinders its practical usage. Herein, a self-adhesive and contractile silk fibroin/graphene nano-ionotronic skin was successfully prepared using a high-yield electro-blowing technique. The electro-blowing technique was able to effectively overcome the instability of the spinning jet and raise the feed rate to at least 5 ml h^-1. The high Ca²⁺content provided the fabricated nano-ionotronic skin with humidity-induced stretchability and robusticity. More importantly, the ionotronic skin also possessed a self-adhesive property and was able to contract to adapt to irregular surfaces. Additionally, an analytical piezoresistive model was successfully built to predict the response of the sensors to stress. Furthermore, due to its stable conductivity, sensitivity, and self-adapting property, the obtained nano-ionotronic skin can be used for body monitoring, for example, for bending of the arm and hand gestures. The design and manufacture concept proposed in this work might inspire the development of high-yield ionotronic nanofibers and the design of self-adapting artificial skin.

Versatile Ice Microneedles for Transdermal Delivery of Diverse Actives

Microneedles are regarded as an emerging and promising transdermal drug delivery strategy. Great efforts are devoted to getting rid of their material restrictions and imparting them with abilities to carry various drugs. Here, inspired by ice formation in nature and based on characteristics of different frozen materials, the authors present novel ice microneedles made from versatile soft materials using a simple freezing template-based fabrication stratagem for effective transdermal delivery of diverse actives. Their strategy can convert microneedles with almost all water-containing components from softness into hardness for guaranteeing satisfactory penetration, thus removing their material component limitations. As all fabrication procedures are mild and actives can maintain activity during these processes, the ice microneedles can carry and deliver various actives from small molecules and macromolecules to even living organisms. They have demonstrated that these ice microneedles can easily penetrate mouse and swine skins using a microneedle injector, with their active-carried tips left inside after their ice base melts. Thus, by loading heparin, erythropoietin, or biosafe Bacillus subtilis (B. subtilis) inside the ice microneedles to treat mouse models, the practical values of these microneedles are well displayed, indicating their bright prospects in universal drug delivery systems.

Self-Healing, Self-Adhesive Silk Fibroin Conductive Hydrogel as a Flexible Strain Sensor

Flexible and wearable hydrogel strain sensors have attracted tremendous attention for applications in human motion and physiological signal monitoring. However, it is still a great challenge to develop a hydrogel strain sensor with certain mechanical properties and tensile deformation capabilities, which can be in conformal contact with the target organ and also have self-healing properties, self-adhesive capability, biocompatibility, antibacterial properties, high strain sensitivity, and stable electrical performance. In this paper, an ionic conductive hydrogel (named PBST) is rationally designed by proportionally mixing polyvinyl alcohol (PVA), borax, silk fibroin (SF), and tannic acid (TA). SF can not only be a reinforcement to introduce an energy dissipation mechanism into the dynamically cross-linked hydrogel network to stabilize the non-Newtonian behavior of PVA and borax but it can also act as a cross-linking agent to combine with TA to reduce the dissociation of TA on the hydrogel network, improving the mechanical properties and viscoelasticity of the hydrogel. The combination of SF and TA can improve the self-healing ability of the hydrogel and realize the adjustable viscoelasticity of the hydrogel without sacrificing other properties. The obtained hydrogel has excellent stretchability (strain > 1000%) and shows good conformal contact with human skin. When the hydrogel is damaged by external strain, it can rapidly self-repair (mechanical and electrical properties) without external stimuli. It shows adhesiveness and repeatable adhesiveness to different materials (steel, wood, PTFE, glass, iron, and cotton fabric) and biological tissues (pigskin) and is easy to peel off without residue. The obtained PBST conductive hydrogel also has a wide strain-sensing range (>650%) and reliable stability. The hydrogel adhered to the skin surface can monitor large strain movements such as in finger joints, wrist joints, knee joints, and so on and detect swallowing, smiling, facial bulging and calming, and other micro-deformation behaviors. It can also distinguish physical signals such as light smile, big laugh, fast and slow breathing, and deep and shallow breathing. Therefore, the PBST conductive hydrogel material with multiple synergistic functions has great potential as a flexible wearable strain sensor. The PBST hydrogel has antibacterial properties and good biocompatibility at the same time, which provides a safety guarantee for it as a flexible wearable strain sensor. This work is expected to provide a new way for people to develop ideal wearable strain sensors.

Low-temperature adaptive conductive hydrogel based on ice structuring proteins/CaCl2 anti-freeze system as wearable strain and temperature sensor

Conductive hydrogels as wearable devices meet the basic demands of mechanical flexibility and smart sensing. However, achieving anti-freeze property in conductive hydrogels is still challengeable. Here, a novel anti-freezing system based on ice structuring proteins and CaCl₂ was introduced to enable a conductive hydrogel with low-temperature adaptability. Both formation of ice nuclei and ice growth of the hydrogel at sub-zero temperature could be inhibited. Supported by the anti-freeze system, the hydrogel revealed good flexibility (890% at -20 °C), recovery and conductivity (0.50 S/m at -20 °C) at both room temperature and sub-zero temperature. The low-temperature adaptability enabled the hydrogel to be used as strain and temperature sensors at both room temperature and sub-zero temperature. The anti-freeze system in this work is expected to open up a new avenue to promote the conductive hydrogel with low-temperature adaptability.

Two-Dimensional MoO2 Nanosheet Composite Hydrogels with High Transmittance and Excellent Photothermal Property for Near-Infrared Responsive Actuators and Microvalves

Stimulus-responsive intelligent hydrogel actuators have highly promising applications in the fields of soft robotics, smart manipulators, and flexible devices. Near-infrared (NIR) light is considered an ideal method to trigger the response behavior remotely and precisely. In order to realize the excellent optical transmittance and photothermal property of NIR-responsive hydrogels at the same time, two-dimensional nonlayered MoO₂ nanosheets (2D-MoO₂) with excellent photothermal efficiency (62% under an NIR light irradiation of 808 nm), splendid chemistry stability, and low preparation cost are used as photothermal agents and incorporated into the poly(N-isopropylacrylamide) (PNIPAM) hydrogel network, forming the 2D-MoO₂/Laponite/PNIPAM ternary nanocomposite hydrogel (TN hydrogel). It is remarkable that compared with the GO and MXene hydrogels with the same agent content (1.0 mg mL^-1) and thickness (1 mm) whose transmittance values are only ∼5% at 600 nm, the TN hydrogel shows a similar NIR-responsive temperature, but much higher optical transmittance (∼53%). Besides, of the three hydrogels with similar transmittance, the TN hydrogel shows a much higher NIR-responsive temperature. The TN hydrogel with a low loading of 2D-MoO₂ (1.5 mg mL^-1) can produce a significant temperature increase of ∼30 °C after the application of 0.8 W cm^-2 NIR light irradiation for 15 s. Impressively, the TN hydrogel exhibits excellent anti-fatigue property, keeping a fast response and temperature rise behavior even after 50 times of heating-cooling cycles. The flexibly controllable and reversible deformation is realized by a well-designed bilayer structure even in harsh environments. The transparent and asymmetric bilayer hydrogel is further used as a soft manipulator to capture objects visually and accurately. The NIR light-controlled microvalve based on this composite hydrogel is also demonstrated. This work provides a novel kind of transparent hybrid NIR response hydrogel for the further development of smart, programmable, reversible hydrogel-based actuators and soft robotics.

Tough chitosan/poly(acrylamide-acrylic acid)/cellulose nanofibrils/ethylene glycol nanocomposite organohydrogel with tolerance to hot and cold environments

Simultaneously achieving good mechanical properties and high tolerance to hot and cold environments in hydrogel materials remains a challenge. In this work, ethylene glycol (EG) and cellulose nanofibrils (CNFs) were introduced into chitosan/poly(acrylamide-acrylic acid) double-network hydrogels to improve their toughness and tolerance to hot and cold environments. The effect of EG and CNFs on the properties of the hydrogels was studied respectively. EG increases the tolerance of the hydrogel to hot and cold environments. However, EG had a negative effect on the mechanical properties of hydrogels. In addition, CNFs substantially enhanced the strength and toughness of the chitosan/poly(acrylamide-acrylic acid)/EG organohydrogels. Finally, with the cooperative action of EG and CNFs, high-strength and tough organohydrogels (tensile strength = 0.71 MPa, elongation at break = 787.2%) with a high tolerance to hot and cold environments (-23 °C to 60 °C) were obtained. Further, EG enabled the organohydrogel to revert to its original state after drying at 60 °C. This paper provides a new route to prepare high-strength and tough organohydrogels with a high tolerance to hot and cold environments.