Synthesis of 1,6-Hexanediol from Cellulose Derived Tetrahydrofuran-Dimethanol with Pt-WOx/TiO2 Catalysts

Bio-Polyethylene and Polyethylene Biocomposites: An Alternative toward a Sustainable Future

Polyethylene (PE), a highly prevalent non-biodegradable polymer in the field of plastics, presents a waste management issue. To alleviate this issue, bio-based PE (bio-PE), derived from renewable resources like corn and sugarcane, offers an environmentally friendly alternative. This review discusses various production methods of bio-PE, including fermentation, gasification, and catalytic conversion of biomass. Interestingly, the bio-PE production volumes and market are expanding due to the growing environmental concerns and regulatory pressures. Additionally, the production of PE and bio-PE biocomposites using agricultural waste as filler materials, highlights the growing demand for sustainable alternatives to conventional plastics. According to previous studies, addition of ≈50% defibrillated corn and abaca fibers into bio-PE matrix and a compatibilizer, results in the highest Young's modulus of 4.61 and 5.81 GPa, respectively. These biocomposites have potential applications in automotive, building construction, and furniture industries. Moreover, the advancement made in abiotic and biotic degradation of PE and PE biocomposites is elucidated to address their environmental impacts. Finally, the paper concludes with insights into the opportunities, challenges, and future perspectives in the sustainable production and utilization of PE and bio-PE biocomposites. In summary, production of PE and bio-PE biocomposites can contribute to a cleaner and sustainable future.

Recent advances in catalytic synthesis of 2,5-furandimethanol from 5-hydroxymethylfurfural and carbohydrates

5-Hydroxymethylfurfural (HMF) is a versatile platform chemical derived from the dehydration of renewable carbohydrates (typically glucose/fructose-based monosaccharides, oligosaccharides, and polysaccharides). Some useful compounds, such as 2,5-furandimethanol (FDM), 2,5-dimethylfuran (DMF) and 2,5-dimethyltetrahydrofuran (DMTHF), have been synthesized by reduction of HMF. Among these, FDM is a promising diol and can be further converted towards fine chemicals, liquid fuels and polymer materials. In this review, some typical catalytic systems for the synthesis of FDM from both HMF and carbohydrates were summarized. The discussion focused on controlling the reaction networks for the reduction of HMF. The reaction mechanisms and the stability of the catalysts were introduced briefly. Last but not least, the prospects of effective production of FDM were discussed as well.

Synthesis by Melt-Polymerization of a Novel Series of Bio-Based and Biodegradable Thiophene-Containing Copolyesters with Promising Gas Barrier and High Thermomechanical Properties

Volatile global oil prices, owing to the scarcity of fossil resources, have impacted the cost of producing petrochemicals. Therefore, there is a need to seek novel, renewable chemicals from biomass feedstocks that have comparable properties to petrochemicals. In this study, synthesis, thermal and mechanical properties, and degradability studies of a novel series of sustainable thiophene-based copolyesters like poly(hexylene 2,5-thiophenedicarboxylate-co-bis(2-hydroxyethoxybenzene) (PTB_xH_y) were conducted via a controlled melt polymerization method. Fourier-transform infrared (FTIR) and nuclear magnetic resonance (¹H NMR) spectroscopy techniques elucidated the degree of randomness and structural properties of copolyesters. Meanwhile, gel permeation chromatography (GPC) analysis showed a high average molecular weight in the range of 67.4-78.7 × 10³ g/mol. The glass transition temperature (T_g) was between 69.4 and 105.5 °C, and the melting point between 173.7 and 194.2 °C. The synthesized polymers outperformed poly(ethylene 2,5-thiophenedicarboxylate) (PETF) and behaved similarly to polyethylene terephthalate. The copolyesters exhibited a high tensile strength of 46.4-70.5 MPa and a toughness of more than 600%, superior to their corresponding homopolyesters. The copolyesters, which ranged from 1,4-bis(2-hydroxyethyl)benzene thiophenedicarboxylate (TBB)-enriched to hexylene thiophenedicarboxylate (THH)-enriched, offered significant control over crystallinity, thermal and mechanical properties. Enzymatic hydrolysis of synthetized polymers using porcine pancreatic lipase (PP-L) over a short period resulted in significant weight losses of 9.6, 11.4, 30.2, and 35 wt%, as observed by scanning electron microscopy (SEM), with perforations visible on all surfaces of the films. Thus, thiophene-based polyesters with cyclic aromatic structures similar to terephthalic acid (TPA) show great promise as PET mimics. At the same time, PP-L appears to be a promising biocatalyst for the degradation of bioplastic waste and its recycling via re-synthesis processes.

A facile process for adipic acid production in high yield by oxidation of 1,6-hexanediol using the resting cells of Gluconobacter oxydans

Background

Adipic acid (AA) is one of the most important industrial chemicals used mainly for the production of Nylon 6,6 but also for making polyurethanes, plasticizers, and unsaturated polyester resins, and more recently as a component in the biodegradable polyester poly(butylene adipate terephthalate) (PBAT). The main route for AA production utilizes benzene as feedstock and generates copious amounts of the greenhouse gas NO₂. Hence, alternative clean production routes for AA from renewable bio-based feedstock are drawing increasing attention. We have earlier reported the potential of Gluconobacter oxydans cells to oxidize 1,6-hexanediol, a potentially biobased diol to AA.

Results

The present report involves a study on the effect of different parameters on the microbial transformation of 1,6-hexanediol to adipic acid, and subsequently testing the process on a larger lab scale for achieving maximal conversion and yield. Comparison of three wild-type strains of G. oxydans DSM50049, DSM2003, and DSM2343 for the whole-cell biotransformation of 10 g/L 1,6-hexanediol to adipic acid in batch mode at pH 7 and 30 °C led to the selection of G. oxydans DSM50049, which showed 100% conversion of the substrate with over 99% yield of adipic acid in 30 h. An increase in the concentrations of the substrate decreased the degree of conversion, while the product up to 25 g/L in batch and 40 g/L in fed-batch showed no inhibition on the conversion. Moreover, controlling the pH of the reaction at 5–5.5 was required for the cascade oxidation reactions to work. Cell recycling for the biotransformation resulted in a significant decrease in activity during the third cycle. Meanwhile, the fed-batch mode of transformation by intermittent addition of 1,6-hexanediol (30 g in total) in 1 L scale resulted in complete conversion with over 99% yield of adipic acid (approximately 37 g/L). The product was recovered in a pure form using downstream steps without the use of any solvent.

Conclusion

A facile, efficient microbial process for oxidation of 1,6-hexanediol to adipic acid, having potential for scale up was demonstrated. The entire process is performed in aqueous medium at ambient temperatures with minimal greenhouse gas emissions. The enzymes involved in catalyzing the oxidation steps are currently being identified.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-022-01947-6.

Hydrogenolysis of glycerol over TiO2-supported Pt-WOx catalysts: Effects of the TiO2 crystal phase and WOx loading

The selective hydrogenolysis of glycerol to 1,3-propanediol (1,3-PDO) with high added value is attraction but challenging. Pt-WO_x-based catalysts have been extensively studied in the selective hydrogenolysis of glycerol. The catalyst support and the physicochemical state of WO_x play important roles on this reaction. In this paper, Pt-WO_x catalysts supported on TiO₂ with different crystal forms were prepared and studied for their catalytic performance in hydrogenolysis of glycerol. It was observed that the catalytic performance of anatase-type (A-type) TiO₂-supported catalyst (Pt/W/A-Ti) is much better than that of the rutile-type (R-type) TiO₂ catalyst (Pt/W/R-Ti) due to its higher stability. Furthermore, the influence of W loading amount and state were thoroughly investigated for the Pt/W/A-Ti catalysts, and Pt/W/A-TiO₂ with 5 wt% loading of WO_x achieved the best catalytic performance (100% conversion of glycerol and 41% yield of 1,3-PDO under the optimal reaction conditions), owing to the suitable WO_x domains and high dispersion of W species, as evidenced by XRD patterns and TEM images. Mechanism study by in-situ DRIFTS experiments indicated that glycerol was first converted to 3-hydroxypropanal and then converted to 1,3-PDO through subsequent reactions.

Biocompatible non-leachable antimicrobial polymers with a nonionic hyperbranched backbone and phenolic terminal units

This work aimed to develop biocompatible non-leachable antimicrobial polymers without ionic structures. A series of nonionic hyperbranched polymers (HBPs) with an isatin-based backbone and phenolic terminal units were synthesized and characterized. The molecular structures and thermal properties of the obtained HBPs were characterized by SEC, NMR, FTIR, TGA and DSC analyses. Disk diffusion assay revealed significant antibacterial activity of the obtained phenolic HBPs against nine different pathogenic bacteria. The presence of a methoxy or long alkyl group close to the phenolic unit enhanced the antibacterial effect against certain Gram positive and negative bacteria. The obtained nonionic HBPs were blended in polyester poly(hexamethylene terephthalate) films, which showed no noticeable leakage after being immersed in water for 5 days. Finally, these HBPs showed no cytotoxicity effect to MG-63 osteoblast-like human cells according to MTT analysis, and negligible hemolytic effect.

Catalytic Hydroconversion of 5-HMF to Value-Added Chemicals: Insights into the Role of Catalyst Properties and Feedstock Purity

5-hydroxymethylfurfural (HMF) is an important bio-derived platform molecule that is generally obtained from hexoses via acid-catalyzed dehydration. It can be effectively transformed into a variety of value-added derivatives, thus being an ideal candidate for fossil replacement. Both HMF oxidation and hydrogenation processes enable the synthesis of numerous chemicals, monomers for polymerization, and biofuel precursors. This Review summarizes the most recent advances in heterogeneous catalytic hydroconversion of HMF into valuable chemicals with strong focus on 2,5-bishydroxymethyl furan (BHMF), 2,5-bishydroxymethyltetrahydrofuran (BHMTHF), and 2,5-dimethyltetrahydrofuran (DMTHF). In addition, multifunctional catalytic systems that enable a tunable production of various HMF derived intermediates are discussed. Within this chemistry, the surprising impact of HMF purity on the catalytic performance, such as selectivity and activity, during its upgrading is highlighted. Lastly, the remaining challenges in the field of HMF hydroconversion to the mentioned chemicals are summarized and discussed, taking into account the knowledge gain of catalyst properties and feedstock purity.

Catalytic Conversion of 5-Hydroxymethylfurfural to High-Value Derivatives by Selective Activation of C-O, C=O, and C=C Bonds

With increasing concern for reducing CO₂ emission and alleviating fossil resource dependence, catalytic transformation of 5-hydroxymethylfurfural (HMF), a vital platform compound derived from C₆ sugars, holds great promise for producing value-added chemicals. Among several well-established catalytic systems, hydrogenation and oxidation processes have been efficiently adopted for upgrading HMF. This Review covers recent advances in the development of thermocatalytic conversion of HMF into value-added chemicals. The advances of metal-catalyzed hydrogenation, hydrogenolysis, ring-opening, decarbonylation, and oxidation involving selective activation of C-O, C=O, and C=C groups are described. The roles played by nature of metals, supports, additives, synergy of metal-acid sites, and metal-support interaction are also discussed at the molecular level. Finally, an outlook is provided to highlight major challenges associated with this huge research area.

Sustainable Catalytic Transformation of Biomass-Derived 5-Hydroxymethylfurfural to 2,5-Bis(hydroxymethyl)tetrahydrofuran

5-Hydroxymethylfurfural (5-HMF), one of the most important platform molecules in biorefinery, can be directly obtained from a vast diversity of biomass materials. Owing to the reactive functional groups (-CHO and -CH₂ OH) in the structure, this versatile building block undertakes several transformations to provide a wealth of high value-added products. Among numerous well-established paradigms, the catalytic hydrogenation of 5-HMF towards 2,5-bis(hydroxymethyl)tetrahydrofuran (BHMTHF) is of great interest because this downstream diol can be exploited in a wide range of industrial applications. Not surprisingly, incessant endeavors from both academia and industry to upgrade this catalytic process have been established over the years. The main aim of this Review was to provide a comprehensive overview on the development of heterogeneous metal catalysts for the 5-HMF-to-BHMTHF transformation. Herein, the rational design and utility of hydrogenating catalysts were elaborated in many aspects including metal types (Ni, Co, Pd, Ru, Pt, and bimetals), solid supports, preparation method, recyclability, operating conditions, and reaction regime (batch and continuous flow). In addition, the assessment of cooperative catalysts to convert carbohydrates into BHMTHF under one-pot cascade, tentative mechanism, as well as prospects and challenges for the chemo-selective hydrogenation of 5-HMF were also highlighted.

Integrated Cascade Process for the Catalytic Conversion of 5-Hydroxymethylfurfural to Furanic and TetrahydrofuranicDiethers as Potential Biofuels

The depletion of fossil resources is driving the research towards alternative renewable ones. Under this perspective, 5-hydroxymethylfurfural (HMF) represents a key molecule deriving from biomass characterized by remarkable potential as platform chemical. In this work, for the first time, the hydrogenation of HMF in ethanol was selectively addressed towards 2,5-bis(hydroxymethyl)furan (BHMF) or 2,5-bis(hydroxymethyl)tetrahydrofuran (BHMTHF) by properly tuning the reaction conditions in the presence of the same commercial catalyst (Ru/C), reaching the highest yields of 80 and 93 mol%, respectively. These diols represent not only interesting monomers but strategic precursors for two scarcely investigated ethoxylated biofuels, 2,5-bis(ethoxymethyl)furan (BEMF) and 2,5-bis(ethoxymethyl)tetrahydrofuran (BEMTHF). Therefore, the etherification with ethanol of pure BHMF and BHMTHF and of crude BHMF, as obtained from hydrogenation step, substrates scarcely investigated in the literature, was performed with several commercial heterogeneous acid catalysts. Among them, the zeolite HZSM-5 (Si/Al=25) was the most promising system, achieving the highest BEMF yield of 74 mol%. In particular, for the first time, the synthesis of the fully hydrogenated diether BEMTHF was thoroughly studied, and a novel cascade process for the tailored conversion of HMF to the diethyl ethers BEMF and BEMTHF was proposed.

Recent Advances in the Catalytic Hydroconversion of 5-Hydroxymethylfurfural to Valuable Diols

Biomass, a globally available resource, is a promising alternative feedstock for fossil fuels, especially considering the current energy crisis and pollution. Biomass-derived diols, such as 2,5-bis(hydroxymethyl)furan, 2,5-bis(hydroxymethyl)-tetrahydrofuran, and 1,6-hexanediol, are a significant class of monomers in the polyester industry. Therefore, the catalytic conversion of biomass to valuable diols has received extensive research attention in the field of biomass conversion and is a crucial factor in determining the development of the polyester industry. 5-Hydroxymethylfurfural (HMF) is an important biomass-derived compound with a C6-furanic framework. The hydroconversion of HMF into diols has the advantages of being simple to operate, inexpensive, environmentally friendly, safe, and reliable. Therefore, in the field of diol synthesis, this method is regarded as a promising approach with significant industrialization potential. This review summarizes recent advances in diol formation, discusses the roles of catalysts in the hydroconversion process, highlights the reaction mechanisms associated with the specificities of each active center, and provides an outlook on the challenges and opportunities associated with the research on biomass-derived diol synthesis.

Hydrogen Spillover-Enhanced Heterogeneously Catalyzed Hydrodeoxygenation for Biomass Upgrading

Hydrodeoxygenation (HDO) is regarded as a promising technology for biomass upgrading to obtain sustainable and competitive chemicals and fuels. In fact, biomass HDO over heterogeneous solid catalysts is often accompanied by the phenomenon of hydrogen spillover, which further affects the catalytic performance. Thus, it is necessary to gain in-depth understand the promoting effect of hydrogen spillover in the biomass HDO process to obtain desired conversion and selectivity. This Review summarized the extensive research on hydrogen spillover in biomass refining and discussed in detail the regulation mechanism of hydrogen spillover in biomass HDO process, mainly by regulating different active center sites on catalyst supports, such as metal sites, acid sites, surface functional groups, and defective sites, which exhibit independent and synergistic characteristics promoting catalyst activity, selectivity, and stability. Finally, the prospective of hydrogen spillover in biomass HDO applications was critically evaluated, and the key technical challenges in developing "hydrogen-free" HDO and upgrading biofuels were highlighted. The presentation of hydrogen spillover-enhanced catalytic biomass HDO in this Review will hopefully provide insight and guidance for further development of efficient catalysts and preparation of high-value chemicals in the future.

Melt polycondensation of 2,5-tetrahydrofurandimethanol with various dicarboxylic acids towards a variety of biobased polyesters

The effects of THFDM's structure on its reactivity, polymer molecular chain energy and properties were systematically studied.

Effect of DMSO on the catalytical production of 2,5-bis(hydoxymethyl)furan from 5-hydroxymethylfurfural over Ni/SiO2 catalysts

Highly effective production of 2,5-bis(hydoxymethyl)furan (BHMF) from 5-hydroxymethylfurfural (HMF) has been achieved over Ni/SiO2 catalyst. An effect of DMSO on the HMF hydrogenation is demonstrated under practical conditions.

Synergistic interaction of renewable nipagin and eugenol for aromatic copoly(ether ester) materials with desired performance

Naturally occurring nipagin and eugenol were used as the collaborative starting materials for poly(ether ester) polymers. In this study, two series of nipagin and eugenol-derived copoly(ether ester)s, PHN1_1−xE1_x and PHN1_1−xE2_x (x = 0%, 5%, 10%, 15%, 20%), were prepared with renewable 1,6-hexanediol as a comonomer. The nipagin-derived component acts as the renewable surrogate of petroleum-based dimethyl terephthalate (DMT), while the eugenol-derived component acts as the cooperative property modifier of parent homopoly(ether ester) PHN1. 1,6-Hexanediol was chosen as the spacer because of its renewability, high boiling point, and short chain to enhance the glass transition temperatures (T_gs) of materials. The molecular weights and chemical structures were confirmed by gel permeation chromatograph (GPC), NMR and FTIR spectroscopies. Thermal and crystalline properties were studied by thermal gravimetric analysis (TGA), differential scanning calorimetric (DSC) and wide-angle X-ray diffraction (WXRD). The tensile assays were conducted to evaluate the mechanical properties. The results suggested that properties of this kind of poly(ether ester)s could be finely tuned by the relative content of two components for the desired applications (elastomer, rubbery) suitable for different scenarios from polyethylene glycol terephthalate (PET) and polybutylene terephthalate (PBT).

Simultaneous production of 1,6-hexanediol, furfural, and high-purity lignin from white birch: Process integration and techno-economic evaluation

An integrated strategy of multiple catalytic conversions was developed to completely utilize three major fractions of biomass, thereby increasing the revenue from lignocellulosic biomass (white birch). Cellulose was converted into 1,6-hexanediol (1,6-HDO) with a yield of 21.8% via a series of catalytic conversions, hemicellulose was converted into furfural with a yield of 87.2% via dehydration, and lignin was purified into high-purity lignin with a yield of 71.7% via two-step purification. Heat integration was performed to mitigate the challenges associated with the large energy requirements of the process. Additionally, a techno-economic analysis was conducted to investigate the feasibility of the proposed process. The minimum selling price (MSP) of 1,6-HDO is estimated to be $3,922/ton, meaning that the economics of the proposed process are favorable compared to petroleum-derived 1,6-HDO production ($4,400/ton). The effect of economic parameters on the MSP of 1,6-HDO was also investigated via a wide array of sensitivity analyses.

Quantum Mechanical Calculations for Biomass Valorization over Metal-Organic Frameworks (MOFs)

Metal-organic framework (MOF) in biomass valorization is a promising technology developed in recent decades. By tailoring both the metal nodes and organic ligands, MOFs exhibit multiple functionalities, which not only extend their applicability in biomass conversion but also increase the complexity of material designs. To address this issue, quantum mechanical simulations have been used to provide mechanistic insights into the catalysis of biomass-derived molecules, which could potentially facilitate the development of novel MOF-based materials for biomass valorization. The aim of this review is to survey recent quantum mechanical simulations on biomass reactions occurring in MOF catalysts, with the emphasis on the studies of the catalytic activity of active sites and the effects of organic ligand and porous structures on the kinetics. Moreover, different model systems and computational methods used for MOF simulations are also surveyed and discussed in this review.

Selective Hydrogenolysis of Erythritol over Ir-ReOx /Rutile-TiO2 Catalyst

Partial hydrogenolysis of erythritol, which can be produced at large scale by fermentation, to 1,4-butanediol (1,4-BuD) is investigated with Ir-ReO_x /SiO₂ and Ir-ReO_x /rutile-TiO₂ catalysts. In addition to the higher conversion rate over Ir-ReO_x /TiO₂ than over Ir-ReO_x /SiO₂ , which has been also reported for glycerol hydrogenolysis, Ir-ReO_x /TiO₂ showed higher selectivity to 1,4-BuD than Ir-ReO_x /SiO₂ , especially at low conversion levels, leading to high 1,4-BuD productivity of 20 mmol_1,4-BuD  g_Ir ^-1  h^-1 at 373 K (36 % conversion, 33 % selectivity). The productivity based on the noble metal amount is higher than those reported previously, although the maximum yield of 1,4-BuD (23 %) is not higher than the highest reported values. The reactions of various triols, diols and mono-ols are tested and the selectivity and the reaction rates are compared between catalysts and between substrates. The Ir-ReO_x /TiO₂ catalyst showed about twofold higher activity than Ir-ReO_x /SiO₂ in hydrogenolysis of the C-OH bond at the 2- or 3-positions in 1,2- and 1,3-diols, respectively, whereas the hydrogenolysis of C-OH at the 1-position is less promoted by the TiO₂ support. Lowering the loading amount of Ir on TiO₂ (from 4 wt % to 2 or 1 wt %) decreases the Ir-based activity and 1,4-BuD selectivity. Similarly, increasing the loading amount on SiO₂ from 4 wt % to 20 wt % increases the Ir-based activity and 1,4-BuD selectivity, although they remain lower than those for TiO₂ -supported catalyst with 4 wt % Ir. High metal loadings on the support seem to be important.

Chemicals from Lignin: A Review of Catalytic Conversion Involving Hydrogen

Lignin is the most abundant biopolymer with aromatic building blocks and its valorization to sustainable chemicals and fuels has extremely great potential to reduce the excessive dependence on fossil resources, although such conversions remain challenging. The purpose of this Review is to present an insight into the catalytic conversion of lignin involving hydrogen, including reductive depolymerization and the hydrodeoxygenation of lignin-derived monomers to arenes, cycloalkanes and phenols, with a main focus on the catalyst systems and reaction mechanisms. The roles of hydrogenation sites (Ru, Pt, Pd, Rh) and acid sites (Nb, Ti, Mo), as well as their interaction in selective hydrodeoxygenation reactions are emphasized. Furthermore, some inspirational strategies for the production of other value-added chemicals are mentioned. Finally, some personal perspectives are provided to highlight the opportunities within this attractive field.

Value-Added Bio-Chemicals Commodities from Catalytic Conversion of Biomass Derived Furan-Compounds

The depletion of fossil resources in the near future and the need to decrease greenhouse gas emissions lead to the investigation of using alternative renewable resources as raw materials. One of the most promising options is the conversion of lignocellulosic biomass (like forestry residues) into bioenergy, biofuels and biochemicals. Among these products, the production of intermediate biochemicals has become an important goal since the petrochemical industry needs to find sustainable alternatives. In this way, the chemical industry competitiveness could be improved as bioproducts have a great potential market. Thus, the main objective of this review is to describe the production processes under study (reaction conditions, type of catalysts, solvents, etc.) of some promising intermediate biochemicals, such as; alcohols (1,2,6-hexanetriol, 1,6-hexanetriol and pentanediols (1,2 and 1,5-pentanediol)), maleic anhydride and 5-alkoxymethylfuran. These compounds can be produced using 5-hydroxymethylfurfural and/or furfural, which they both are considered one of the main biomass derived building blocks.

Efficient Plastic Waste Recycling to Value-Added Products by Integrated Biomass Processing

The industrial production of polymeric materials is continuously increasing, but sustainable concepts directing towards a circular economy remain rather elusive. The present investigation focuses on the recycling of polyoxymethylene polymers, facilitated through combined catalytic processing of polymer waste and biomass-derived diols. The integrated concept enables the production of value-added cyclic acetals, which can flexibly function as solvents, fuel additives, pharmaceutical intermediates, and even monomeric materials for polymerization reactions. Based on this approach, an open-loop recycling of these waste materials can be envisaged in which the carbon content of the polymer waste is efficiently utilized as a C1 building block, paving the way to unprecedented possibilities within a circular economy of polyoxymethylene polymers.

CNN pincer ruthenium complexes for efficient transfer hydrogenation of biomass-derived carbonyl compounds

The ligand HCNNOMe (6-(4-methoxyphenyl)-2-aminomethylpyridine) is easily prepared from the commercially available 6-(4-methoxyphenyl)pyridine-2-carbaldehyde by the reaction of hydroxylamine and hydrogenation (H2, 1 atm) with Pd/C. The pincer complexes cis-[RuCl(CNNOMe)(PPh3)2] (1) and [RuCl(CNNOMe)(PP)] (PP = dppb, 2; and dppf, 3) are synthesized from [RuCl2(PPh3)3], HCNNOMe and PP (for 2 and 3) in 2-propanol with NEt3 at reflux and are isolated in 85-93% yield. Carbonylation of 1 (CO, 1 atm) gives [RuCl(CNNOMe)(CO)(PPh3)] (4) (79% yield) which cleanly reacts with Na[BArf4] and PCy3, affording the cationic trans-[Ru(CNNOMe)(CO)(PCy3)(PPh3)][BArf4] (5) (92% yield). These robust pincer complexes display remarkably high catalytic activity in the transfer hydrogenation (TH) of lignocellulosic biomass carbonyl compounds, using 2-propanol at reflux in a basic medium (NaOiPr or K2CO3). Thus, furfural, 5-(hydroxymethyl)furfural and Cyrene are reduced to the corresponding alcohols with 2 and 3, at S/C in the range of 10 000-100 000, within minutes or hours (TOF up to 1 500 000 h-1). The monocarbonyl complex 5 was found to be extremely active in the TH of cinnamaldehyde, vanillin derivatives and ethyl levulinate at S/C in the range of 10 000-50 000. Vanillyl alcohol is also obtained by the TH of vanillin with 5 (S/C = 500) in 2-propanol in the presence of K2CO3.

Reduction of sugar derivatives to valuable chemicals: utilization of asymmetric carbons

Recent progress on non-furfural routes from sugar derivatives to valuable chemicals including chiral chemicals was reviewed.

An Eco-Friendly Method to Get a Bio-Based Dicarboxylic Acid Monomer 2,5-Furandicarboxylic Acid and Its Application in the Synthesis of Poly(hexylene 2,5-furandicarboxylate) (PHF)

Recently, we have developed an eco-friendly method for the preparation of a renewable dicarboxylic acid 2,5-furandicarboxylic acid (FDCA) from biomass-based 5-hydroxymethylfrufural (HMF). In the present work, we optimized our reported method, which used phosphate buffer and Fe(OH)₃ as the stabilizer to improve the stability of potassium ferrate, then got a purified FDCA (up to 99%) in high yield (91.7 wt %) under mild conditions (25 °C, 15 min, air atmosphere). Subsequently, the obtained FDCA, along with 1,6-hexanediol (HDO), which was also made from HMF, were used as monomers for the synthesis of poly(hexylene 2,5-furandicarboxylate) (PHF) via direct esterification, and triphenyl phosphite was used as the antioxidant to alleviate the discoloration problem during the esterification. The intrinsic viscosity, mechanical properties, molecular structure, thermal properties, and degradability of the PHFs were measured or characterized by Koehler viscometer, universal tensile tester, Nuclear Magnetic Resonance (NMR), Fourier-transform Infrared (FTIR), X-ray diffraction (XRD), Differential Scanning Calorimeter (DSC), Derivative Thermogravimetry (DTG), Scanning Electron Microscope (SEM), and weight loss method. The experimental evidence clearly showed that the furan-aromatic polyesters prepared from biomass-based HMF are viable alternatives to the petrochemical benzene-aromatic polyesters, they can serve as low-melting heat bondable fiber, high gas-barrier packaging material, as well as specialty material for engineering applications.

Aerobic oxidation of C4–C6 α,ω-diols to the diacids in base-free medium over zirconia-supported (bi)metallic catalysts

Aerobic oxidation of (C₄–C₆) α,ω-diols in water produces the corresponding α,ω-diacids in high 83–96% yields over a Au–Pt/ZrO₂ catalyst.