Non-fouling hydrogels of 2-hydroxyethyl methacrylate and zwitterionic carboxybetaine (meth)acrylamides

Titanium Surface-Grafted Zwitterionic Polymers with an Anti-Polyelectrolyte Effect Enhances Osteogenesis

Zwitterionic polymers have attracted considerable attention because of their anti-adsorption and unique anti-polyelectrolyte effects and was widely used in surface modification. In this study, zwitterionic copolymers (poly (sulfobetaine methacrylate-co-butyl acrylate) (pSB) coating on the surface of a hydroxylated titanium sheet using surface-initiated atom transfer radical polymerization (SI-ATRP) was successfully constructed. X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR) and Water contact angle (WCA) analysis proved the successful preparation of the coating. The swelling effect caused by the anti-polyelectrolyte effect was reflected in the simulation experiment in vitro, and this coating can promote the proliferation and osteogenesis of MC3T3-E1. Therefore, this study provides a new strategy for designing multifunctional biomaterials for implant surface modifications.

Self-Initiated Photopolymerization of Anti-Inflammatory Zwitterionic Hydrogels with Sustained Release

Hydrogels are three-dimensional networks of hydrophilic polymers that have garnered significant attention as wound-healing materials. Many synthetic hydrogels are fabricated using a radical polymerization approach that requires an initiator molecule that is often photo- or thermosensitive. Initiator-free hydrogels are an emerging area of research that focuses on hydrogel fabrication that occurs in the absence of an initiator or cross-linker molecule, making these hydrogels highly relevant in tissue engineering and regenerative medicine due to their excellent cytocompatibility and ease of scale-up. Here we present on the development of initiator-free zwitterionic hydrogels that photopolymerize without any initiator or cross-linker while under cytocompatible conditions. The hydrogels exhibit a wide range of mechanical characteristics that are dependent on their polymer composition. They resist nonspecific protein adsorption and exhibit a sustained release of proteins and small molecules. Additionally, these self-initiated hydrogels significantly mitigate inflammatory macrophage activation in vitro. Overall, the development of self-initiated photopolymerized zwitterionic hydrogels offers significant progress in the fields of biomaterials and materials science.

Polyzwitterion Manipulates Remineralization and Antibiofilm Functions against Dental Demineralization

Biomineralization technology has become a trend for the arrest and prevention of dental caries. In particular, the bioactivity and ability to release large amounts of Ca²⁺ and PO₄^3- ions make amorphous calcium phosphate (ACP) for hard tissue remineralization are highly desired. However, the instability of ACP limits its clinical application. Under continuous bacterial challenge in the oral cavity, the currently developed ACP-based remineralization system lacks the ability to inhibit bacterial adhesion and biofilm formation. Here, a dual-functional nanocomposite with antibiofilm and remineralization properties was designed by combining zwitterionic poly(carboxybetaine acrylamide) (PCBAA) and ACP. The resulting nanocomposite was stable in solution for at least 3 days without any aggregation. The PCBAA/ACP nanocomposite exerted a significant inhibitory effect on the adhesion and biofilm formation of Streptococcus mutans and exhibited bactericidal activities under acidic conditions resulting from bacteria. Moreover, compared with fluoride, this nanocomposite demonstrated superior effects in promoting the remineralization of demineralized enamel and the occlusion of exposed dentinal tubules in vivo and in vitro. The present work provides a theoretical and experimental basis for the use of the PCBAA/ACP nanocomposite as a potential dual-functional agent for arresting and preventing caries.

Photopolymerized Zwitterionic Hydrogels with a Sustained Delivery of Cerium Oxide Nanoparticle-miR146a Conjugate Accelerate Diabetic Wound Healing

In the United States, $87 billion per year is spent on the care of diabetic ulcers alone. Although the pathophysiology of diabetic wound healing is multifaceted, high systemic levels of inflammation and increased reactive oxygen species are often implicated in the wound healing impairment. Zwitterionic materials have been demonstrated to reduce inflammation and increase extracellular matrix deposition in wound beds, and here, we demonstrate a fabrication method for photopolymerized zwitterionic hydrogels that also enables sustained drug delivery over time. A therapeutic molecule of interest that is examined in this work is cerium oxide nanoparticle tagged with microRNA-146a (CNP-miR146a) to combat both oxidative stress and inflammation. The hydrogels are composed of zwitterionic and nonzwitterionic monomers, and the hydrogel formation occurs in the absence of a crosslinker. The hydrogels exhibit a wide range of stiffness and mechanical properties depending on their monomer content. Additionally, these hydrogels exhibit sustained release of nanoparticles and proteins. Finally, when employed in an in vivo diabetic mouse wound healing model, the zwitterionic hydrogels alone and laden with the CNP-miR146a conjugate significantly improved the rate of diabetic wound healing. Overall, these materials have excellent potential to be used as a topical treatment for chronic diabetic wounds.

DNase I functional microgels for neutrophil extracellular trap disruption

Neutrophil extracellular traps (NETs) are web-like chromatin structures produced and liberated by neutrophils under inflammatory conditions which also promote the activation of the coagulation cascade and thrombus formation. The formation of NETs is quite prominent when blood comes in contact with artificial surfaces like extracorporeal circuits, oxygenator membranes, or intravascular grafts. DNase I as a factor of the host defense system, digests the DNA backbone of NETs, which points out its treatment potential for NET-mediated thrombosis. However, the low serum stability of DNase I restricts its clinical/therapeutic applications. To improve the bioavailability of the enzyme, DNase I was conjugated to the microgels (DNase I MG) synthesized from highly hydrophilic N-(2-hydroxypropyl) methacrylamide (HPMA) and zwitterionic carboxybetaine methacrylamide (CBMAA). The enzyme was successfully conjugated to the microgels without any alternation to its secondary structure. The K_m value representing the enzymatic activity of the conjugated DNase I was calculated to be 0.063 μM demonstrating a high enzyme-substrate affinity. The DNase I MGs were protein repellant and were able to digest NETs more efficiently compared to free DNase in a biological media, remarkably even after long-term exposure to the stimulated neutrophils continuously releasing NETs. Overall, the conjugation of DNase I to a non-fouling microgel provides a novel biohybrid platform that can be exploited as non-thrombogenic active microgel-based coatings for blood-contacting surfaces to reduce the NET-mediated inflammation and microthrombi formation.

A Zwitterionic-Aromatic Motif-Based ionic skin for highly biocompatible and Glucose-Responsive sensor

Electronic skins that can sense external stimuli have been of great significance in artificial intelligence and smart wearable devices in recent years. However, most of current skin materials are unable to achieve high biocompatibility and anti-bacterial activity, which are particularly critical to wearable sensors for neonatal/premature monitoring or tissue-interfaced biosensors (such as electronic wound dressing and smart contact lens). Herein, a zwitterionic-aromatic motif-based conductive hydrogel with electrostatic and π-π interactions is designed for the development of ionic skin sensors. The hydrogel possesses high biocompatibility, anti-bacterial activity, especially glucose-responsive property which has not been achieved by previous ionic skins. Due to its unique molecular design, the zwitterionic-aromatic skin sensor exhibits excellent mechanical properties (robust elasticity and large stretchability) and high-sensitive pressure detection (including a gentle finger touch, small water droplets, and vocal cord vibration). More importantly, aromatic motives in phenylboronic acid segments endow the skin with glucose-responsive property. This skin sensor not only shows great potential in wearable e-skins, but also possesses a promising property for the tissue-interfaced and implantable continuous-glucose-monitor biosensors such as smart wound dressing with a high demand of biocompatibility.

Graphene-based materials: the key for the successful application of pHEMA as a blood-contacting device

Thrombosis and infection are the leading causes of blood-contacting device (BCD) failure, mainly due to the poor performance of existing biomaterials. Poly(2-hydroxyethyl methacrylate) (pHEMA) has excellent hemocompatibility but the weak mechanical properties impair its use as a bulk material for BCD. As such, pHEMA has been explored as a coating, despite the instability and difficulty of attachment to the underlying polymer compromise its success. This work describes the hydrogel composites made of pHEMA and graphene-based materials (GBM) that meet the biological and mechanical requirements for a stand-alone BCD. Five GBM differing in thickness, oxidation degree, and lateral size were incorporated in pHEMA, revealing that only oxidized-GBM can reinforce pHEMA. pHEMA/oxidized-GBM composites are cytocompatible and prevent the adhesion of endothelial cells, blood platelets, and bacteria (S. aureus), thus maintaining pHEMA's anti-adhesive properties. As a proof of concept, the thrombogenicity of the tubular prototypes of the best formulation (pHEMA/Graphene oxide (GO)) was evaluated in vivo, using a porcine arteriovenous-shunt model. pHEMA/GO conduits withstand the blood pressure and exhibit negligible adhesion of blood components, revealing better hemocompatibility than ePTFE, a commercial material for vascular access. Our findings reveal pHEMA/GO, a synthetic and off-the-shelf hydrogel, as a preeminent material for the design of blood-contacting devices that prevent thrombosis and bacterial adhesion.

Antibacterial infection and immune-evasive coating for orthopedic implants

Bacterial infection and infection-induced immune response have been a life-threatening risk for patients having orthopedic implant surgeries. Conventional biomaterials are vulnerable to biocontamination, which causes bacterial invasion in wounded areas, leading to postoperative infection. Therefore, development of anti-infection and immune-evasive coating for orthopedic implants is urgently needed. Here, we developed an advanced surface modification technique for orthopedic implants termed lubricated orthopedic implant surface (LOIS), which was inspired by slippery surface of Nepenthes pitcher plant. LOIS presents a long-lasting, extreme liquid repellency against diverse liquids and biosubstances including cells, proteins, calcium, and bacteria. In addition, we confirmed mechanical durability against scratches and fixation force by simulating inevitable damages during surgical procedure ex vivo. The antibiofouling and anti-infection capability of LOIS were thoroughly investigated using an osteomyelitis femoral fracture model of rabbits. We envision that the LOIS with antibiofouling properties and mechanical durability is a step forward in infection-free orthopedic surgeries.

Injectable, self-healable zwitterionic cryogels with sustained microRNA - cerium oxide nanoparticle release promote accelerated wound healing

Diabetics are prone to chronic wounds that have slower healing, and methods of accelerating the wound closure and to ensure protection from infections are critically needed. MicroRNA-146a gets dysregulated in diabetic wounds and injection of this microRNA combined with reactive oxygen species-scavenging cerium oxide nanoparticles (CNPs) can reduce inflammation and improve wound healing; however, a better delivery method than intradermal injections is needed. Here we demonstrate a biomaterial system of zwitterionic cryogels (gels formed below freezing temperatures) laden with CNP-miR146a that are topically applicable, injectable, self-healable, and provide sustained release of the therapeutic molecules. These cryogels are comprised of CBMA or SBMA and HEMA, and do not contain chemical crosslinkers. Properties of the gels can be manipulated by changing monomer type and ratio. These materials have demonstrated efficacy and viability in vivo with a diabetic mouse wound healing model. Overall, these materials have a high potential for application in wound treatments due to their ease of production, antifouling characteristics, durability, topical application, and sustained release mechanics. STATEMENT OF SIGNIFICANCE: This work presents the development of zwitterionic cryogels with unique physical properties including injectability and self-healing, that also offer highly sustained release of nanoparticles over time to improve wound healing in a diabetic mouse model. The nanoparticles are made of cerium oxide, which is known to scavenge reactive oxygen species and reduce oxidative stress, and these particles have been further tagged with a microRNA146a that has been shown to reduce inflammation. Zwitterionic materials are known for their superior antifouling properties and good biocompatibility and ability to incorporate bioactive factors. Given these properties, the use of these materials as wound healing dressings would be exciting, yet to date it has been difficult to prolong the release of bioactive factors from them due to their hydrophilicity. Previously we developed zwitterionic cyrogels with very sustained protein release over time, but those materials were quite brittle and difficult to handle. Here, we demonstrate for the first time that by removing the crosslinker molecule from our reaction and polymerizing gels under cryo-conditions, we are able to form zwitterionic cryogels that are injectable, self-healing, and with sustained release profiles. The sustained release of miRNA146a-tagged cerium oxide nanoparticles from these gels is demonstrated to speed up diabetic wound healing time and significantly reduce inflammation.

Antifouling Super Water Absorbent Supramolecular Polymer Hydrogel as an Artificial Vitreous Body

Recently, there has been a high expectation that high water absorbent hydrogels can be developed as an artificial vitreous body. However, the drawbacks associated with in vivo instability, biofouling, uncontrollable in situ reaction time, and injection-induced precrosslinked fragmentation preclude their genuine use as vitreous substitutes. Here, a supramolecular binary copolymer hydrogel termed as PNAGA-PCBAA by copolymerization of N-acryloyl glycinamide (NAGA) and carboxybetaine acrylamide (CBAA) is prepared. This PNAGA-PCBAA hydrogel physically crosslinked by dual amide hydrogen bonds of NAGA exhibits an ultralow solid content (1.6, 98.4 wt% water content), and shear-thinning behavior, body temperature extrudability/self-healability, rapid network recoverability, and very close key parameters (modulus, antifouling/antifibrosis, light transmittance, refractive index, ultrastability) to human vitreous body. It is demonstrated that the hydrogel can be readily injected by a 22G needle into the rabbits' eyes where the gelling network is rapidly recovered. After 16 weeks postoperation, the hydrogel acts as a very stable vitreous substitute without affecting the structure of soft tissues in eye, or eliciting adverse effects. This supramolecular binary copolymer hydrogel finds a broad application in ophthalmic fields as not only a self-recoverable permanent vitreous substitute, but also transient intraocular filling for prevention of inner tissues in postsurgical eyes.

SPR Biosensor for Quantification of Fetuin-A as a Promising Multibiomarker

Early diagnosis of ongoing malignant disease is crucial to improve survival rate and life quality of the patients and requires sensitive detection of specific biomarkers e.g. prostate-specific antigen (PSA), carcinoembryonic antigen (CEA), alpha-fetoprotein (AFP), etc. In spite of current technological advances, malignant diseases are still identified in rather late stages, which have detrimental effect on the prognosis and treatment of the disease. Here, we present a biosensor able to detect fetuin-A, a potential multibiomarker. The biosensing platform is based on polymer brush combining antifouling monomer units of N-(2-hydroxypropyl)methacrylamide (HPMA) and carboxybetaine methacrylamide (CBMAA), statistically copolymerized by surface-initiated atom transfer radical polymerization. The copolymer poly(HPMA-co-CBMAA) exhibits excellent non-fouling properties in the most relevant biological media (i.e. blood plasma) as well as antithrombogenic surface properties by preventing the adhesion of blood components (i.e. leukocytes; platelets; and erythrocytes). Moreover, the polymer brush can be easily functionalized with biorecognition elements maintaining high resistance to blood fouling and the binding capacity can be regulated by tuning the ratio between CBMAA and HPMA units. The superior antifouling properties of the copolymer even after biofunctionalization were exploited to fabricate a new plasmonic biosensor for the analysis of fetuin-A in real clinical blood plasma samples. The assay used in this work can be explored as label-free affinity biosensor for diagnostics of different biomarkers in real clinical plasma samples and to shift the early biomarker detection toward novel biosensor technologies allowing point of care analysis.

Zwitterionic polypeptides bearing carboxybetaine and sulfobetaine: synthesis, self-assembly, and their interactions with proteins

Zwitterionic polypeptides bearing carboxybetaine and sulfobetaine were synthesized and their self-assembly and protein interactions were evaluated.

Epoxylated Zwitterionic Triblock Copolymers Grafted onto Metallic Surfaces for General Biofouling Mitigation

Titanium and stainless steel materials are widely used in numerous devices or in custom parts for their excellent mechanical properties. However, their lack of biocompatibility seriously limits their usage in the biomedical field. This study focuses on the grafting of triblock copolymers on titanium and stainless steel metal susbtrates for improving their general biofouling resistance. The series of copolymers that we designed is composed of two blocks of zwitterionic sulfobetaine (SBMA) monomers and one block of glycidyl methacrylate (GMA). The number of repeat units forming each block, n, was finely tuned and controlled to 25, 50, 75, or 100, permitting regulation of the grafting thickness, the morphology, and the dependent properties such as the surface hydrophilicity and biofouling resistance. It was shown that the copolymer possessing n = 50 repeat units in each block, corresponding to a molecular weight of about 15.2 kDa, led to the best nonfouling properties, assessed using plasma proteins, blood cells, fibroblasts cells, and various bacteria. This was explained by an optimized grafting degree and chain organization of the copolymer. Lower value (n = 25) and higher values (n = 75, 100) led to low surface coverage and the formation of aggregates, respectively. The best copolymer was grafted onto scalpels (steel) and dental roots (titanium), and antifouling properties demonstrated using Escherichia coli and HT1080 cells. Results of this work show that this unique triblock copolymer holds promise as a potential material for surface modification of biomedical metallic devices, provided a fine-tuning of the blocks organization and length.

Salt-Responsive Bilayer Hydrogels with Pseudo-Double-Network Structure Actuated by Polyelectrolyte and Antipolyelectrolyte Effects

Development of stimuli-responsive, shape-transformable materials is fundamentally and practically important for smart actuators. Herein, we design and synthesize a bilayer hydrogel by assembling a polycationic (polyMETAC/HEAA) layer with polyelectrolyte effect and a polyzwitterionic (polyVBIPS) layer with antipolyelectrolyte effect together. The bilayer hydrogels adopt a pseudo-double-network structure, and both polyelectrolyte and polyzwitterionic layers have salt-responsive swelling and shrinkage properties, but in a completely opposite way. The resulting polyMETAC/HEAA-polyVBIPS bilayer hydrogels exhibit bidirectional bending in response to salt solutions, salt concentrations, and counterion types. Such bidirectional bending of this bilayer hydrogel is fully reversible and triggered between salt solution and pure water multiple times. The bending orientation and degree of the bilayer hydrogel is driven by the opposite volume changes between the volume shrinking (swelling) of polyMETAC/HEAA layer and the volume swelling (shrinking) of polyVBIPS layer. Such cooperative, not competitive, salt-responsive swelling-shrinking properties of the two layers are contributed to by the polyelectrolyte and antipolyelectrolyte effects from the respective layers. Moreover, an eight-arm gripper made of this bilayer hydrogel is fabricated and demonstrates its ability to grasp an object in salt solution and release the object in water. This work provides a new shape-regulated, stimuli-responsive asymmetric hydrogel for actuator-based applications.

Development of ionic strength/pH/enzyme triple-responsive zwitterionic hydrogel of the mixed l-glutamic acid and l-lysine polypeptide for site-specific drug delivery

Environmentally responsive hydrogels for drug delivery.

Non-sticky and antimicrobial zwitterionic nanocomposite dressings for infected chronic wounds

Zwitterionic poly(sulfobetaine acrylamide) (pSBAA)-based nanocomposite hydrogels can have high potential for the treatment of infected chronic wounds.

Zwitterionic surface grafting of epoxylated sulfobetaine copolymers for the development of stealth biomaterial interfaces

Most biomaterials have a lack of a simple, efficient and robust antifouling modification approach that limits their potential for biomedical applications. The challenge is to develop a universal surface grafting solution to meet the antifouling requirement. In this work, a new formulation of zwitterionic sulfobetaine-based copolymer, ploy(glycidyl methacrylate-co-sulfobetaine methacrylate) (poly(GMA-co-SBMA)), is designed as a chemical for grafting onto material and is introduced for the surface zwitterionization of versatile biomaterials, including ceramic, metal, and plastics. The grafting principle used to stabilize the poly(GMA-co-SBMA) on the target surfaces is based the base-induced ring opening reaction between epoxied and hydroxyl groups. A universal surface modification procedure was developed and performed from an optimized sequence of ultra-violet ozone pretreatment and trimethylamine-catalyzed zwitterionization on a selective case of versatile surfaces including silicon wafer, ceramic glass, titanium, steel, and polystyrene. The prepared poly(GMA-co-SBMA) with an optimum PGMA/PSBMA ratio of 0.23 and a molecular weight of 25kDa exhibited the best resistance to fibrinogen adsorption with over 90% reduction as well as blood cell activation, tissue cell adhesion and bacterial attachment on the zwitterionic copolymer grafted surfaces. The developed antifouling grafting introduces a universal modification method to generate zwitterionic interfaces on versatile biomaterial substrates, providing great potential for application in medical device coating.

STATEMENT OF SIGNIFICANCE

A simple, efficient and robust antifouling modification approach is critical for many scientific interests and industrial applications. In current stage, the existing available zwitterionic modifications suffer from the lack of universal surface grafting solution to achieve the antifouling requirement on versatile biomaterial substrates. In this study, we synthesized and characterized a new zwitterionic sulfobetaine-based copolymer, ploy(glycidyl methacrylate-co-sulfobetaine methacrylate) (poly(GMA-co-SBMA)), which is designed as chemical grafting onto material and introduced for the surface zwitterionization of versatile biomaterials, including ceramic, metal, and plastics. This research have a promising opportunity for the application of stealth biomaterial interfaces on the next generation of medical devices.

Extremely Stretchable and Fast Self-Healing Hydrogels

Dynamic crosslinking of extremely stretchable hydrogels with rapid self-healing ability is described. Using this new strategy, the obtained hydrogels are able to elongate 100 times compared to their initial length and to completely self-heal within 30 s without external energy input.

Hepatitis B plasmonic biosensor for the analysis of clinical serum samples

A plasmonic biosensor for rapid detection of protein biomarkers in complex media is reported. Clinical serum samples were analyzed by using a novel biointerface architecture based on poly[(N-(2-hydroxypropyl) methacrylamide)-co-(carboxybetaine methacrylamide)] brushes functionalized with bioreceptors. This biointerface provided an excellent resistance to fouling even after the functionalization and allowed for the first time the direct detection of antibodies against hepatitis B surface antigen (anti-HBs) in clinical serum samples using surface plasmon resonance (SPR). The fabricated SPR biosensor allowed discrimination of anti-HBs positive and negative clinical samples in 10min. Results are validated by enzyme-linked immunoassays of the sera in a certified laboratory. The sensor could be regenerated by simple treatment with glycine buffer.

Fast and Simple Preparation of Patterned Surfaces with Hydrophilic Polymer Brushes by Micromolding in Capillaries

Micropatterns of hydrophilic polymer brushes were prepared by micromolding in capillaries (MIMIC). The polymers are covalently bound to the surfaces by a rapid hetero Diels-Alder reaction, constituting the first example of polymers grafted to surfaces in a defined pattern by MIMIC. The polymers [poly(acrylic acid), poly(hydroxyethyl acrylate), and poly(tetraethylene glycol acrylate) ranging in molecular weight from 1500 to 6000 g mol(-1)] were prepared with narrow dispersities via the reversible addition-fragmentation chain transfer (RAFT) process using a highly electron deficient RAFT agent that can react with surface-anchored dienes such as cyclopentadiene. We demonstrate that the anchoring method is facile to perform and highly suitable for preparing patterned surfaces that are passivated against biological impact in well-defined areas.

Structural and optical studies of pHEMA encapsulated ZnS:Ni²⁺ nanoparticles

In this study, ZnS:Ni(2+) nanostructures have been synthesized through chemical precipitation method using poly (2-hydroxyethyl methacrylate) (pHEMA) as capping agent. The structural, morphological and optical properties at different pHEMA concentration of ZnS:Ni(2+) were studied by using X-ray diffraction (XRD), high resolution transmission electron microscopy (HR-TEM), UV-Vis Spectroscopy (UV-Vis), fourier transform infrared spectroscopy (FT-IR), Photoluminescence (PL). The Average crystalline size of the nanoparticles was found to be in the range of ∼3.59-4.36 nm. The surface morphological analysis reveals that the pHEMA capped nanoparticles showed homogeneous smooth surface. HR-TEM analysis reminds the original size of pHEMA capped nanoparticles. The band gap investigation revealed the size dependent of quantum confined nanoparticles. The immobilized nanoparticles in pHEMA matrix were verified by FT-IR studies. Novel luminescence properties have been observed for uncapped and pHEMA capped ZnS nanoparticles. The optimal capping concentration was successfully determined and its influence on photoluminescence behavior has been thoroughly analyzed.

Applying thermosettable zwitterionic copolymers as general fouling-resistant and thermal-tolerant biomaterial interfaces

We introduced a thermosettable zwitterionic copolymer to design a high temperature tolerance biomaterial as a general antifouling polymer interface. The original synthetic fouling-resistant copolymer, poly(vinylpyrrolidone)-co-poly(sulfobetaine methacrylate) (poly(VP-co-SBMA)), is both thermal-tolerant and fouling-resistant, and the antifouling stability of copolymer coated interfaces can be effectively controlled by regulating the VP/SBMA composition ratio. We studied poly(VP-co-SBMA) copolymer gels and networks with a focus on their general resistance to protein, cell, and bacterial bioadhesion, as influenced by the thermosetting process. Interestingly, we found that the shape of the poly(VP-co-SBMA) copolymer material can be set at a high annealing temperature of 200 °C while maintaining good antifouling properties. However, while the zwitterionic PSBMA polymer gels were bioinert as expected, control of the fouling resistance of the PSBMA polymer networks was lost in the high temperature annealing process. A poly(VP-co-SBMA) copolymer network composed of PSBMA segments at 32 mol % showed reduced fibrinogen adsorption, tissue cell adhesion, and bacterial attachment, but a relatively higher PSBMA content of 61 mol % was required to optimize resistance to platelet adhesion and erythrocyte attachment to confer hemocompatibility to human blood. We suggest that poly(VP-co-SBMA) copolymers capable of retaining stable fouling resistance after high temperature shaping have a potential application as thermosettable materials in a bioinert interface for medical devices, such as the thermosettable coating on a stainless steel blood-compatible metal stent investigated in this study.

Non-cell-adhesive substrates for printing of arrayed biomaterials

Cellular microarrays have become extremely useful in expediting the investigation of large libraries of (bio)materials for both in vitro and in vivo biomedical applications. An exceedingly simple strategy is developed for the fabrication of non-cell-adhesive substrates supporting the immobilization of diverse (bio)material features, including both monomeric and polymeric adhesion molecules (e.g., RGD and polylysine), hydrogels, and polymers.

A survey of state-of-the-art surface chemistries to minimize fouling from human and animal biofluids

Fouling of artificial surfaces by biofluids is a plague Biotechnology deeply suffers from. Herein, we inventory the state-of-the-art surface chemistries developed to minimize this effect from both human and animal biosamples.

Surface plasmon resonance: advances of label-free approaches in the analysis of biological samples

Surface plasmon resonance sensors have made vast advancements in the sensing technology and the number of applications achievable. New developments in surface plasmon resonance sensors have gained considerable momentum promoted by the urgent needs of fast, reliable and label-free methods for detection and quantification of analytes in molecular biology, medicine and other life sciences. However, even if enormous improvements in the limits of detections have been achieved, this technology still faces important challenges to be translated to clinical practice or in-field measurements. This paper reviews the important recent advances of this technology for the label-free detection in real biological samples and we discussed the key challenges to be overcome to transit from prototypes to commercial biosensors.

Zwitteration: coating surfaces with zwitterionic functionality to reduce nonspecific adsorption

Coating surfaces with thin or thick films of zwitterionic material is an effective way to reduce or eliminate nonspecific adsorption to the solid/liquid interface. This review tracks the various approaches to zwitteration, such as monolayer assemblies and polymeric brush coatings, on micro- to macroscopic surfaces. A critical summary of the mechanisms responsible for antifouling shows how zwitterions are ideally suited to this task.

Synergistic effect on corrosion resistance of Phynox substrates grafted with surface-initiated ATRP (co)polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) and 2-hydroxyethyl methacrylate (HEMA)

Phynox is of high interest for biomedical applications due to its biocompatibility and corrosion resistance. However, some Phynox applications require specific surface properties. These can be imparted with suitable surface functionalizations of its oxide layer. The present work investigates the surface-initiated atom transfer radical polymerization (ATRP) of 2-methacryloyoxyethyl phosphorylcholine (MPC), 2-hydroxyethyl methacrylate (HEMA), and ATRP copolymerization of (HEMA-co-MPC) (block and statistic copolymerization with different molar ratios) on grafted Phynox substrates modified with 11-(2-bromoisobutyrate)-undecyl-1-phosphonic acid (BUPA) as initiator. It is found that ATRP (co)polymerization of these monomers is feasible and forms hydrophilic layers, while improving the corrosion resistance of the system.

Photo-patterning of non-fouling polymers and biomolecules on paper

Functional cellulose substrates with tetrazole moieties are generated to serve as universal platforms for the spatio-temporal immobilization of synthetic ultra-low fouling polymer brushes and protein species via a nitrile imine-mediated tetrazole-ene cycloaddition (NITEC)-based protocol. Poly(carboxybetaine acrylamide) brushes are grafted from initiators photo-patterned by NITEC utilizing single electron transfer living radical polymerization. Streptavidin is photo-immobilized with remarkable efficiency, opening the possibility to generate new materials for biomedical and biosensing applications.

Zwitterionic poly(2-oxazoline)s as promising candidates for blood contacting applications

The hemocompatibility and cytotoxicity of zwitterionic poly(2-oxazoline)s are investigated.

Materials that harness and modulate the immune system

Recently, biomaterial scientists have married materials engineering and immunobiology to conceptualize new immunomodulatory materials. This special class of biomaterials can modulate and harness the innate properties of immune functionality for enhanced therapeutic efficacy. Generally, two fundamental strategies are followed in the design of immunomodulatory biomaterials: (1) immuno-evasive (immuno-mimetic, immuno-suppressing, or immuno-inert) biomaterials and (2) immuno-activating or immuno-enhancing biomaterials. This article highlights the development and application of a number of immunomodulatory materials, categorized by these two general approaches.

Diagnosis of Epstein-Barr virus infection in clinical serum samples by an SPR biosensor assay

Label-free affinity biosensors offer a promising platform for the development of a new generation of medical diagnostic technologies. Nevertheless, when such sensors are used in complex biological media, adsorption of non-targeted medium components prevents the specific detection of the analyte. In this work, we introduce for the first time a biosensor assay based on surface plasmon resonance (SPR) capable of diagnosing different stages of Epstein-Barr virus (EBV) infections in clinical serum samples. This was achieved by simultaneous detection of the antibodies against three different antigens present in the virus. To prevent the interference of the fouling from serum during the measurement, the SPR chips were coated by an antifouling layer of a polymer brush of poly[oligo(ethylene glycol) methacrylate] grown by surface-initiated atom transfer radical polymerization. The bioreceptors were then attached via hybridization of complementary oligonucleotides. This allowed the sensor surface to be regenerated after measurement by disrupting the complementary pairs above the oligonucleotides' melting temperature and attaching new bioreceptors. In this way, the same sensing surface could be used repeatedly. The procedure used in this work will serve as a prototype strategy for the development of label-free affinity biosensors for diagnostics in blood serum or plasma samples. This is the first example of detection of marker of a disease in clinical serum samples by an optical affinity biosensor.

Controlled cell adhesion on poly(dopamine) interfaces photopatterned with non-fouling brushes

Bioinspired poly(dopamine) (PDA) films are merged with antifouling poly(MeOEGMA) brushes utilizing a nitrile imine-mediated tetrazole-ene cycloaddition (NITEC)-based phototriggered surface encoding protocol. The antifouling brushes were photopatterned on PDA surfaces, leading cells to form confluent layers in the non-irradiated sections, while no adhesion occurred on the brushes resulting in a remarkably precise cell pattern. The presented strategy paves the way for the design of tailor-made patterned cell interfaces.