Effects of chloride and ionic strength on physical morphology, dissolution, and bacterial toxicity of silver nanoparticles

Fish acute toxicity of nine nanomaterials: Need of pre-tests to ensure comparability and reuse of data

Fish acute toxicity tests are commonly used in aquatic environmental risk assessments, being required in different international substances regulations. A general trend in the toxicity testing of nanomaterials (NMs) has been to use standardized aquatic toxicity tests. However, as these tests were primarily developed for soluble chemical, issues regarding particle dissolution, agglomeration or sedimentation during the time of exposure are not considered when reporting the toxicity of NMs. The aim of this study was to characterize the NM behaviour throughout the fish acute test and to provide criteria to assay the toxicity of nine NMs based on TiO2, ZnO, SiO2, BaSO4, bentonite, and carbon nanotubes, on rainbow trout following OECD Test Guideline (TG) nº203. Our results showed the importance of conducting a preliminary test (without fish) when working with NMs. They provide valuable information on, sample monitoring, agglomeration, sedimentation, dissolution, actual concentrations of NMs, needed to design the test. Among the NMs tested, only bentonite nanoparticles were stable during the 96-h pre-test and test in aquarium water. In contrast, the remaining NMs exhibited considerable loss and sedimentation within the first 24 h. The high sedimentation observed for almost all NMs highlights the need of consistently measuring the concentrations throughout the entire duration of the fish acute toxicity test to make reliable concentration-response relationships. Notable differences emerged in LC50 values when using actual concentrations as nominal concentrations overestimated concentrations by up to 85.6%. Among all NMs tested, only ZnO NMs were toxic to rainbow trout. A flow chart was specifically developed for OECD TG 203, aiding users in making informed decisions regarding the selection of test systems and necessary modifications to ensure accurate, reliable, and reusable toxicity data. Our findings might contribute to the harmonization of TG 203 improving result reproducibility and interpretability and supporting the development of read-across and QSAR models.

Environmental behavior of silver nanomaterials in aquatic environments: An updated review

The increasing applications of silver nanomaterials (nano-Ag) and their inevitable release posed great potential risks to aquatic organisms and ecosystems. Considerable attention has been attracted on their behaviors and transformations, which were critically important for their subsequent biological toxicities and ecological effects. Therefore, the summary of the recent efforts on the environmental behavior of nano-Ag would be beneficial for understanding the environmental fate and accurate risk assessment. This review summarized the studies on various physical, chemical and biological transformations of nano-Ag, meanwhile, the influencing factors (including the intrinsic properties and environmental conditions) and related mechanisms were highlighted. Surface structure and facets of nano-Ag, abiotic conditions and natural freeze-thaw cycle processes could affect the transformations of nano-Ag under different environmental scenarios (including freshwater, seawater and wastewater). The interactions with co-present components, such as chemicals and other particles, impacted the multiple processes of nano-Ag. Besides, the contradictory effects and mechanisms by several environmental factors were summarized. Lastly, the key knowledge gaps and some aspects that deserve further investigation were also addressed. Therefore, the current review aimed to provide an overall analysis of transformation processes of nano-Ag, which will provide more available information and pave the way for the future research areas.

Comprehensive response of microbes to Ag and Ag2S nanoparticles and silver spatial distribution in constructed wetlands

This study investigated functional bacteria, key enzymes, and nitrogen metabolism in vertical flow constructed wetlands (CWs) after exposing to silver, silver sulfide nanoparticles (Ag NPs and Ag2S NPs), and silver iron (Ag+), and silver spatial distribution in CWs for 155 days. Ag NPs and Ag2S NPs affected species richness and diversity whereas Ag+ showed the higher the species diversity indices. Sequencing analysis exhibited that Ag NPs or Ag+ significantly inhibited nitrogen metabolic process by hindering the relative activity of functional enzymes, downregulating relative abundances of nrfA, norB and napA for Ag NPs, nxrA gene for Ag+, while Ag2S NPs inhibited relative abundance of nirA. The above results confirmed that NPs or Ag+ significantly reduced nitrogen removal and Ag NPs mainly inhibited NO3--N removal while Ag+ significantly suppressed NH4+-N removal. This study also found that CWs could effectively remove NPs or Ag+ (about 98 %), and nanoparticles showed higher translocation factors (TFs) values (0.81-1.15 or 0.36), indicating nanoparticles transported easily through substrate layers.

Integrating Navajo Pottery Techniques To Improve Silver Nanoparticle-Enabled Ceramic Water Filters for Disinfection

Point-of-use treatment technologies can increase access to safe drinking water in rural areas. Sustained use of these technologies is uncommon due to oversight of community needs, user-perceived risks, long-term maintenance, and conflict with traditional practices. Nanosilver-enabled ceramic water filters are unique due to the use of locally sourced materials available at or near the target community; however, technical limitations persist (e.g., nanosilver's uncontrolled release and passivation from sulfide or chloride). This work aims to overcome these limitations by impregnating nanosilver onto ceramics with a Navajo pottery rosin, collected from pinyon trees with a third-generation artisan. Here, we investigate this sustainable and novel material for drinking water treatment; the study ranges from a proof of concept to testing under realistic conditions. Results show that when embedded in a thin film, the biopolymer controlled ionic silver dissolution and prevented silver passivation from sulfide and chloride. When applied to ceramic filters, the biopolymer effectively immobilized nanosilver in a range of waters. Over a 25 day study to emulate household-use conditions, this coating method sustained disinfection of a coculture of Gram-positive and Gram-negative bacteria while controlling biofouling. Overall, the use of this Navajo pottery material can facilitate adoption while providing the needed technological advancement to these widely used treatment devices.

Silver nanoparticles loaded on lactose/alginate: in situ synthesis, catalytic degradation, and pH-dependent antibacterial activity

We present the in situ synthesis of silver nanoparticles (AgNPs) through ionotropic gelation utilizing the biodegradable saccharides lactose (Lac) and alginate (Alg). The lactose reduced silver ions to form AgNPs. The crystallite structure of the nanocomposite AgNPs@Lac/Alg, with a mean size of 4-6 nm, was confirmed by analytical techniques. The nanocomposite exhibited high catalytic performance in degrading the pollutants methyl orange and rhodamine B. The antibacterial activity of the nanocomposite is pH-dependent, related to the alterations in surface properties of the nanocomposite at different pH values. At pH 6, the nanocomposite demonstrated the highest antibacterial activity. These findings suggest that this nanocomposite has the potential to be tailored for specific applications in environmental and medicinal treatments, making it a highly promising material.

Novel insights into the multistep chlorination of silver nanoparticles in aquatic environments

Due to the increasing applications, silver nanoparticles (AgNPs) are inevitably released into the environments and are subjected to various transformations. Chloride ion (Cl^-) is a common and abundant anion with a wide range of concentration in aquatic environments and exhibits a strong affinity for silver. The results indicate that AgNPs experienced multistep chlorination, which was dependent on the concentration of Cl^- in a non-linear manner. The dissolution of AgNPs was accelerated at Cl/Ag ratio of 1 and the intensive etching effect of Cl^- contributed to the significant morphology changes of AgNPs. The dissolved Ag⁺ quickly precipitated with Cl^- to form an amorphous and passivating AgCl(s) layer on the surface of AgNPs, thus the dissolution rate of AgNPs decreased at higher Cl/Ag ratios (100 and 1000). As the Cl/Ag ratio further increased to 10,000, the overall transformation rate increased remarkably due to the complexation of Cl^- with AgCl(s) to form soluble AgCl_x^(x-1)- species, which was verified by the reaction of AgCl nanoparticles with Cl^-. Besides, several environmental factors (electrolytes, surfactants and natural organic matter) affected AgNPs dissolution and the following chlorination. These results will expand the understanding of the environmental fate and potential risks of AgNPs in natural chloride-rich waters.

A Comparative Study of the Biodurability and Persistence of Gold, Silver and Titanium Dioxide Nanoparticles Using the Continuous Flow through System

The potential for nanoparticles to cause harm to human health and the environment is correlated with their biodurability in the human body and persistence in the environment. Dissolution testing serves to predict biodurability and nanoparticle environmental persistence. In this study, dissolution testing using the continuous flow through system was used to investigate the biodurability and persistence of gold nanoparticles (AuNPs), silver nanoparticles (AgNPs) and titanium dioxide nanoparticles (TiO₂ NPs) in five different simulated biological fluids and two synthetic environmental media to predict their behaviour in real life situations. This study examined the physicochemical properties and agglomeration state of gold, silver and titanium dioxide nanoparticles before and after dissolution tests using three different techniques (UV-vis, XRD and TEM). The UV-vis spectra revealed that all three nanoparticles shifted to higher wavelengths after being exposed to simulated fluids. The titanium powder was found to be mixed with both rutile and anatase, according to XRD examination. The average diameter of gold nanoparticles was 14 nm, silver nanoparticles were 10 nm and titanium dioxide nanoparticles were 25 nm, according to TEM images. The gold and silver nanoparticles were observed to be spherical, but the titanium dioxide nanoparticles were irregular in shape, with some being spherical. The level of dissolved nanoparticles in simulated acidic media was higher in magnitude compared to that dissolved in simulated alkaline media. The results obtained via the continuous flow through dissolution system also displayed very significant dissolution rates. For TiO₂ NPs the calculated half-times were in the range of 13-14 days, followed by AuNPs ranging between 4-12 days, significantly longer if compared to the half-times of AgNPs ranging between 2-7 days. AuNPs and TiO₂ NPs were characterized by low dissolution rates therefore are expected to be (bio)durable in physiological surroundings and persistent in the environment thus, they might impose long-term effects on humans and the environment. In contrast, AgNPs have high dissolution rates and not (bio)durable and hence may cause short-term effects. The results suggest a hierarchy of biodurability and persistence of TiO₂ NPs > AuNPs > AgNPs. It is recommended that nanoparticle product developers should follow the test guidelines stipulated by the OECD to ensure product safety for use before it is taken to the market.

Determination of the Particle Number Concentration, Size Distribution, and Species of Dominant Silver-Containing Nanoparticles in Soils by Single-Particle ICP-MS

The potential risk of various silver-containing nanoparticles (AgCNPs) in soils is related to the concentration, size, and speciation, but their determination remains a great challenge. Herein, we developed an effective method for determining the particle number, size, and species of dominant AgCNPs in soils, including nanoparticles of silver (Ag NPs), silver chloride (AgCl NPs), and silver sulfide (Ag₂S NPs). By ultrasonication wand-assisted tetrasodium pyrophosphate extraction, these AgCNPs were extracted efficiently from soils. Then, multistep selective dissolution of Ag NPs, AgCl NPs, and whole Ag NPs/AgCl NPs/Ag₂S NPs was achieved by 1% (v/v) H₂O₂, 5% (v/v) NH₃·H₂O, and 10 mM thiourea in 2% (v/v) acetic acid, respectively. Finally, the particle number concentration and size distribution of AgCNPs in the extracts and the remaining AgCNP particle number concentration after each dissolution were determined by single-particle inductively coupled plasma mass spectroscopy for speciation of the dominant AgCNPs. AgCNPs were detected in all five soil samples with the concentrations of 0.23-8.00 × 10⁷ particles/g and sizes of 16-110 nm. Ag₂S NPs were the main form of AgCNPs in the examined soils with the percentage range of 53.98-69.19%, followed by AgCl NPs (11.42-23.31%) and Ag NPs (7.78-16.19%). Our method offers a new approach for evaluating the occurrence and potential risk of AgCNPs in environmental soils.

Ambivalent effects of dissolved organic matter on silver nanoparticles/silver ions transformation: A review

The numerous applications of silver nanoparticles (AgNPs) lead to their spread in aquatic systems and the release of silver ions (Ag⁺), which brings potential risks to environment and human health. Owing to the different toxicity, the mutual transformations between AgNPs and Ag⁺ has been a hot topic of research. Dissolved organic matter (DOM) is ubiquitous on the earth and almost participates in all the reactions in the nature. The previous studies have reported the roles of DOM played in the transformation between AgNPs and Ag⁺. However, different experiment conditions commonly caused contradictory results, leading to the difficulty to predict the fate of AgNPs in specific reactions. Here we summarized mechanisms of DOM-mediated AgNPs oxidation and Ag⁺ reduction, and analyzed the effects of environmental parameters. Moreover, the knowledge gaps, challenges, and new opportunities for research in this field are discussed. This review will promote the understanding of the fate and risk assessments of AgNPs in natural water systems.

Exploring specific biomarkers regarding neurobehavioral toxicity of lead dioxide nanoparticles in medaka fish in different water matrices

Nano-scale lead dioxide (nPbO₂) is an industrial metal oxide nanoparticle that can be also formed as a corrosion by-product from chlorination of Pb-containing plumbing materials. nPbO₂ governs release of toxic lead ion in drinking water and receiving organisms; however, its modes of toxic action regarding neurobehavioral toxicity remain unclear. This study evaluated the toxicity mechanism of nPbO₂ (10 and 20 mg/L) versus its released Pb(II)_aq (100 μg/L) in terms of aqueous chemistry, bioavailability and neurobehavioral toxicity to medaka fish in different water matrices. In very hard water (VHW), dissolved salts enhanced the aggregation and sedimentation of nPbO₂, resulting in higher bioavailability and altered locomotion of treated fish than those fish exposed to nPbO₂ in soft water with humic acid (SW + HA). Transcriptomic results identified six differentially expressed genes with greater altered expression with nPbO₂ than the control or Pb(II)_aq exposure. With VHW exposure, nPbO₂ caused greater altered expression of genes involved in cell adhesion (nlgn1 and epd), cell cytoskeleton (α1-tubulin), and relevant apoptosis (c-fos, birc5.1-a and casp3), as compared with SW + HA or Pb(II)_aq exposure. This study provides novel molecular mechanistic insights into the neurobehavioral nanotoxicity using nPbO₂ and medaka fish as surrogates, suggesting nPbO₂ promotes neurobehavioral dysfunction, leading to adverse outcomes from gene alteration to the organismal level. The identified biomarkers responded specifically to the nPbO₂-induced neurotoxicity in different water matrices can be used for evaluating toxicity risks of small metal oxide particulates on human or aquatic life under environmentally relevant exposures.

Building the Bridge From Aquatic Nanotoxicology to Safety by Design Silver Nanoparticles

Nanotechnologies have rapidly grown, and they are considered the new industrial revolution. However, the augmented production and wide applications of engineered nanomaterials (ENMs) and nanoparticles (NPs) inevitably lead to environmental exposure with consequences on human and environmental health. Engineered nanomaterial and nanoparticle (ENM/P) effects on humans and the environment are complex and largely depend on the interplay between their peculiar properties such as size, shape, coating, surface charge, and degree of agglomeration or aggregation and those of the receiving media/body. These rebounds on ENM/P safety and newly developed concepts such as the safety by design are gaining importance in the field of sustainable nanotechnologies. This article aims to review the critical characteristics of the ENM/Ps that need to be addressed in the safe by design process to develop ENM/Ps with the ablility to reduce/minimize any potential toxicological risks for living beings associated with their exposure. Specifically, we focused on silver nanoparticles (AgNPs) due to an increasing number of nanoproducts containing AgNPs, as well as an increasing knowledge about these nanomaterials (NMs) and their effects. We review the ecotoxicological effects documented on freshwater and marine species that demonstrate the importance of the relationship between the ENM/P design and their biological outcomes in terms of environmental safety.

Incubation media modify silver nanoparticle toxicity for whitefish (Coregonus lavaretus) and roach (Rutilus rutilus) embryos

Toxicological studies were performed to examine silver nanoparticle (AgNP, size: 14.4 ± 2.5 nm) transformation within three different test media and consequent effects on embryos of whitefish (Coregonus lavaretus) and roach (Rutilus rutilus). The test media, namely ASTM very hard water, ISO standard dilution medium, and natural lake water differed predominantly in ionic strength. Total silver was determined using inductively coupled plasma mass spectrometry (ICP-MS), while AgNPs were characterized by transmission electron microscopy and single particle ICP-MS. Silver species distributions were estimated via thermodynamic speciation calculations. Data demonstrated that increased AgNP dissolution accompanied by decreasing ionic strength of the test medium did not occur as noted in other studies. Further, other physicochemical parameters including AgNP size and metallic species distribution did not markedly affect AgNP-induced toxicity. Irrespective of the test medium, C. lavaretus were more sensitive to AgNP exposure (median lethal concentration after 8 weeks: 0.51-0.73 mg/L) compared to R. rutilus, where adverse effects were only observed at 5 mg/L in natural lake water. In addition, AgNP-induced toxicity was lower in the two standard test media compared to natural lake water. Currently, there are no apparent studies assessing simultaneously the sensitivity of C. lavaretus and R. rutilus to AgNP exposure. Therefore, the aim of this study was to (1) investigate AgNP-induced toxicity in C. lavaretus and R. rutilus cohabiting in the same aquatic environment and (2) the role played by test media in the observed effects of AgNPs on these aquatic species.

Does Silver in Different Forms Affect Bacterial Susceptibility and Resistance? A Mechanistic Perspective

The exceptional increase in antibiotic resistance in past decades motivated the scientific community to use silver as a potential antibacterial agent. However, due to its unknown antibacterial mechanism and the pattern of bacterial resistance to silver species, it has not been revolutionized in the health sector. This study deciphers mechanistic aspects of silver species, i.e., ions and lysozyme-coated silver nanoparticles (L-Ag NPs), against E. coli K12 through RNA sequencing analysis. The obtained results support the reservoir nature of nanoparticles for the controlled release of silver ions into bacteria. This study differentiates between the antibacterial mechanism of silver species by discussing the pathway of their entry in bacteria, sequence of events inside cells, and response of bacteria to overcome silver stress. Controlled release of ions from L-Ag NPs not only reduces bacterial growth but also reduces the likelihood of resistance development. Conversely, direct exposure of silver ions, leads to rapid activation of the bacterial defense system leading to development of resistance against silver ions, like the well-known antibiotic resistance problem. These findings provide valuable insight on the mechanism of silver resistance and antibacterial strategies deployed by E. coli K12, which could be a potential target for the generation of aim-based and effective nanoantibiotics.

Simultaneous Influence of Gradients in Natural Organic Matter and Abiotic Parameters on the Behavior of Silver Nanoparticles in the Transition Zone from Freshwater to Saltwater Environments

As nanoparticles have been found to cause a range of harmful impacts in biota, understanding processes and transformations which may stabilize and increase their persistence time in the environment are of great importance. As nanoparticles carried in riverine or wastewaters will eventually reach estuaries, understanding their behavior and transport potential in this transition zone from fresh to marine waters is essential, particularly as estuaries are sensitive ecological zones, oftentimes encompassing ornithologically important areas. In this direction, we report on the influence of combined gradients of riverine and marine natural organic matter (NOM) on the temporal stability of biocorona-encapsulated silver nanoparticles in terms of ion release kinetics. In parallel, salinity, pH and oxygen saturation were simultaneously varied to create a model to mimic the complex estuarine environment. While humic acid (HA) and alginate (Alg) disrupted the stabilizing ability of the nanoparticle protein corona to a greater and lesser degree, respectively, they slowed the rate of ion release in freshwater at pH 6.6 and in saltwater at pH 8, respectively, while oxygen saturation was also found to be an important factor. Thus, as the type of NOM changes with pH along a salinity gradient in an estuary, conditions required to increase the persistence time of nanoparticles are serendipitously met, with greater colloidal stability achieved in cases where there is more rapid replacement of HA with Alg. Despite the strong gradients in ionic strength, pH and oxygen saturation, the protein corona was not sufficiently disrupted at the nanoparticle surface to be substituted by NOM indicating the greater adsorption energy of the protein's hydrophobic domains. Ultimately, it is the specific NOM profile of individual estuaries that may provide the best indicator for predicting the stability and persistence of silver nanoparticles as they transition from fresh to salt water environments.

Use of an in silico knowledge discovery approach to determine mechanistic studies of silver nanoparticles-induced toxicity from in vitro to in vivo

Background

Silver nanoparticles (AgNPs) are considered a double-edged sword that demonstrates beneficial and harmful effects depending on their dimensions and surface coating types. However, mechanistic understanding of the size- and coating-dependent effects of AgNPs in vitro and in vivo remains elusive. We adopted an in silico decision tree-based knowledge-discovery-in-databases process to prioritize the factors affecting the toxic potential of AgNPs, which included exposure dose, cell type and AgNP type (i.e., size and surface coating), and exposure time. This approach also contributed to effective knowledge integration between cell-based phenomenological observations and in vitro/in vivo mechanistic explorations.

Results

The consolidated cell viability assessment results were used to create a tree model for generalizing cytotoxic behavior of the four AgNP types: SCS, LCS, SAS, and LAS. The model ranked the toxicity-related parameters in the following order of importance: exposure dose > cell type > particle size > exposure time ≥ surface coating. Mechanistically, larger AgNPs appeared to provoke greater levels of autophagy in vitro, which occurred during the earlier phase of both subcytotoxic and cytotoxic exposures. Furthermore, apoptosis rather than necrosis majorly accounted for compromised cell survival over the above dosage range. Intriguingly, exposure to non-cytotoxic doses of AgNPs induced G2/M cell cycle arrest and senescence instead. At the organismal level, SCS following a single intraperitoneal injection was found more toxic to BALB/c mice as compared to SAS. Both particles could be deposited in various target organs (e.g., spleen, liver, and kidneys). Morphological observation, along with serum biochemical and histological analyses, indicated that AgNPs could produce pancreatic toxicity, apart from leading to hepatic inflammation.

Conclusions

Our integrated in vitro, in silico, and in vivo study revealed that AgNPs exerted toxicity in dose-, cell/organ type- and particle type-dependent manners. More importantly, a single injection of lethal-dose AgNPs (i.e., SCS and SAS) could incur severe damage to pancreas and raise blood glucose levels at the early phase of exposure.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12989-022-00447-0.

Microfluidic Synthesis of Theranostic Nanoparticles with Near-Infrared Scintillation: Toward Next-Generation Dosimetry in X-ray-Induced Photodynamic Therapy

We developed a microfluidic synthesis to grow GdF₃:Eu theranostic scintillating nanoparticles to simultaneously monitor the X-ray dose delivered to tumors during treatments with X-ray activated photodynamic therapy (X-PDT). The flow reaction was optimized to enhance scintillation emission from the Eu³⁺ ions. The as-prepared ∼15 nm rhombohedral-shaped nanoparticles self-assembled into ∼100 nm mesoporous flower-like nanostructures, but the rhombohedral units remained intact and the scintillation spectra unaltered. The conjugation of the ScNPs with multilayers of methylene blue (MB) in a core-shell structure (GdF@MB) resulted in enhanced singlet oxygen (¹O₂) generation under X-ray irradiation, with maximum ¹O₂ production for nanoparticles with 4 MB layers (GdF@4MB). High ¹O₂ yield was further evidenced in cytotoxicity assays, demonstrating complete cell death only for the association of ScNPs with MB and X-rays. Because the scintillating Eu³⁺ emission at 694 nm is within the therapeutic window and was only partially absorbed by the MB molecules, it was explored for getting in vivo dosimetric information. Using porcine skin and fat to simulate the optical and radiological properties of the human tissues, we showed that the scintillation light can be detected for a tissue layer of ∼16 mm, thick enough to be employed in radiotherapy treatments of breast cancers, for instance. Therefore, the GdF₃:Eu ScNPs and the GdF@4MB nanoconjugates are strong candidates for treating cancer with X-PDT while monitoring the treatment and the radiation dose delivered, opening new avenues to develop a next-generation modality of real-time in vivo dosimetry.

Materials, surfaces, and interfacial phenomena in nanoplastics toxicology research

In response to the growing worldwide plastic pollution problem, the field of nanoplastics research is attempting to determine the risk of exposure to nanoparticles amidst their ever-increasing presence in the environment. Since little is known about the attributes of environmental nanoplastics (concentration, composition, morphology, and size) due to fundamental limitations in detection and quantification of smaller plastic particles, researchers often improvise by engineering nanoplastic particles with various surface modifications as models for laboratory toxicological testing. Polystyrene and other commercially available or easily synthesized polymer materials functionalized with surfactants or fluorophores are typically used for these studies. How surfactants, additives, fluorophores, the addition of surface functional groups for conjugation, or other changes to surface attributes alter toxicological profiles remains unclear. Additionally, the limited polymers used in laboratory models do not mimic the vast range of polymer types comprising environmental pollutants. Nanomaterials are tricky materials to investigate due to their high surface area, high surface energies, and their propensity to interact with molecules, proteins, and biological probes. These unique properties can often invalidate common laboratory assays. Extreme care must be taken to ensure that results are not artefactual. We have gathered zeta potential values for various polystyrene nanoparticles with different functionalization, in different solvents, from the reported literature. We also discuss the effects of surface engineering and solvent properties on interparticle interactions, agglomeration, particle-protein interactions, corona formation, nano-bio interfaces, and contemplate how these parameters might confound results. Various toxicological exemplars are critically reviewed, and the relevance and shortfalls of the most popular models used in nanoplastics toxicity studies published in the current literature are considered.

Evaluation of antibacterial activities of silver nanoparticles on culturability and cell viability of Escherichia coli

Nanoparticles released into the environment are attracting increasing concern because of their potential toxic effects. Conventional methods for assessing the toxicity of nanoparticles are usually confined to cultivable cells, but not applicable to viable but non-culturable (VBNC) cells. However, it remains unknown whether silver nanoparticles (AgNPs), a typical antimicrobial agent, could induce bacteria into a VBNC state in natural environments. In this work, the viability of E. coli, an indicator bacterium widely used for assessing the antibacterial activity of AgNPs, was examined through coupling plate counting, fluorescence staining and adenosine triphosphate (ATP) production. AgNPs were found to have a considerable antibacterial ability, which resulted in less than 0.0004% of culturable cells on plates. However, more than 80% of the cells still maintained their cell membrane integrity under the stress of 80 mg/L AgNPs. Meanwhile, the residue of ATP production (0.6%) was 1500 times higher than that of the culturable cells (< 0.0004%). These results clearly demonstrate that when exposed to AgNPs, most of cells fell into a VBNC state, instead of dying. Environmental factors, e.g., Cl^- and illumination, which could change the dissolution, hydrophilicity and zeta potential of AgNPs, eventually influenced the culturability of E. coli. Inhibition of dissolved Ag⁺ and reactive oxygen species was found to facilitate the mitigation of the strain into a VBNC state. Our findings suggest the necessity of re-evaluating the environmental effects and antibacterial activities of AgNPs.

Antibacterial and Antifungal Properties of Silver Nanoparticles-Effect of a Surface-Stabilizing Agent

The biocidal properties of silver nanoparticles (AgNPs) prepared with the use of biologically active compounds seem to be especially significant for biological and medical application. Therefore, the aim of this research was to determine and compare the antibacterial and fungicidal properties of fifteen types of AgNPs. The main hypothesis was that the biological activity of AgNPs characterized by comparable size distributions, shapes, and ion release profiles is dependent on the properties of stabilizing agent molecules adsorbed on their surfaces. Escherichia coli and Staphylococcus aureus were selected as models of two types of bacterial cells. Candida albicans was selected for the research as a representative type of eukaryotic microorganism. The conducted studies reveal that larger AgNPs can be more biocidal than smaller ones. It was found that positively charged arginine-stabilized AgNPs (ARGSBAgNPs) were the most biocidal among all studied nanoparticles. The strongest fungicidal properties were detected for negatively charged EGCGAgNPs obtained using (-)-epigallocatechin gallate (EGCG). It was concluded that, by applying a specific stabilizing agent, one can tune the selectivity of AgNP toxicity towards desired pathogens. It was established that E. coli was more sensitive to AgNP exposure than S. aureus regardless of AgNP size and surface properties.

Stability and Microbial Toxicity of Silver Nanoparticles under Denitrifying Conditions

While the antibacterial effect of silver nanoparticles (AgNPs) on environmentally beneficial microbes has drawn considerable attention, the stability and microbial toxicity of AgNPs in a system where nitrate reduction is the dominant terminal electron-accepting process remain understudied. Here, we explore the impact of citrate-coated AgNPs (cit-AgNPs) on the growth and metabolism of two metal-sensitive and one nonsensitive bacterial strains under denitrifying conditions. Dose-response analysis revealed that in contrast to the bacteriostatic effect exhibited at 1 ppm, 5 ppm cit-AgNPs were bactericidal to the metal-sensitive strains. It was observed that the growth of the cells initiated Ag(I) formation, and the supplement of chloride (2.7 mM) to the cultures substantially mitigated the bactericidal capacity of cit-AgNPs, indicating that AgNP dissolution to ionic Ag(I) played a key role in AgNP toxicity. Abiotic experiments confirmed that nitrite, not nitrate, had the capacity to oxidize cit-AgNPs. Transcriptomic analysis revealed that (i) the gene encoding for membrane stress was upregulated proportionally to cit-AgNP concentrations; (ii) cit-AgNPs and Ag(I) at higher levels upregulated genes involved in oxidative stress and iron-sulfur clusters, whereas expressions of the genes responsible for electron transport, ATP synthesis, and denitrification were substantially repressed; (iii) the addition of chloride significantly altered the level of transcriptional profiles of all of the genes. These results not only provide evidence of abiotic AgNP oxidation by metabolic intermediate nitrogen species but also suggest that AgNPs and Ag(I) may induce differential toxicity modes to prokaryotes. Our findings reinforce the importance of evaluating the potential ecological toxicity and risks associated with the transformation of nanomaterials.

The impacts of metal-based engineered nanomaterial mixtures on microbial systems: A review

The last decade has witnessed tremendous growth in the commercial use of metal-based engineered nanomaterials (ENMs) for a wide range of products and processes. Consequently, direct and indirect release into environmental systems may no longer be considered negligible or insignificant. Yet, there is an active debate as to whether there are real risks to human or ecological health with environmental exposure to ENMs. Previous research has focused primarily on the acute effects of individual ENMs using pure cultures under controlled laboratory environments, which may not accurately reveal the ecological impacts of ENMs under real environmental conditions. The goal of this review is to assess our current understanding of ENM effects as we move from exposure of single to multiple ENMs or microbial species. For instance, are ENMs' impacts on microbial communities predicted by their intrinsic physical or chemical characteristics or their effects on single microbial populations; how do chronic ENM interactions compare to acute toxicity; does behavior under simplified laboratory conditions reflect that in environmental media; finally, is biological stress modified by interactions in ENM mixtures relative to that of individual ENM? This review summarizes key findings and our evolving understanding of the ecological effects of ENMs under complex environmental conditions on microbial systems, identifies the gaps in our current knowledge, and indicates the direction of future research.

Silver nanoparticles effect on Artemia salina and Allium cepa organisms: influence of test dilution solutions on toxicity and particles aggregation

The objective of this study was to evaluate the effects of AgNPs on Artemia salina and Allium cepa, evaluating the influence of the dilution solutions on the particle behavior. The AgNPs were synthesized by chemical reduction of AgNO₃ (3 and 5 mmol L^-1) with sodium borohydride and stabilized with PVA (polyvinyl alcohol) and CMC (sodium carboxymethyl cellulose). The toxicity of AgNPs was evaluated in Artemia salina (mortality) using Meyer's solution as a diluent and in Allium cepa (chromosomal aberrations) using reconstituted hard water. AgNPs showed characteristic molecular absorption bands. Particles with CMC presented hydrodynamic radius between 4 and 102 nm and with PVA between 7 and 46 nm. The studied dispersions were toxic to A. salina species. Meyer's solution, used as dilution water in the test, caused precipitation of Ag⁺ and also caused changes in CMC-stabilized AgNPs, changing the shape of the nanoparticles by depositing precipitates on their surface. These changes make the results of toxicity difficult to interpret. AgNPs stabilized with PVA remained unchanged. AgNPs affected cell division and caused the appearance of chromosomal aberrations on A. cepa. Higher numbers of chromosomal aberrations occurred in dispersions with smaller particle diameters (AgNPs3-PVA and AgNPs5-PVA, without dilution). In the studied conditions the dispersions were toxic to the tested organisms, the concentrations of precursors and the type of stabilizer used influenced the particle size and toxicity. In the test with A. cepa, the reconstituted hard water did not cause changes in the dispersions of AgNPs, whereas for A. salina the Meyer solution promoted aggregation of the particles and precipitation, in the dispersions stabilized with CMC, thus changing the samples.

Ionic-strength-dependent effect of suspended sediment on the aggregation, dissolution and settling of silver nanoparticles

Suspended sediment (SS) is ubiquitous in natural waters and plays a key role in the fate of engineered nanomaterials. In this study, the effect of SS on the aggregation, settling, and dissolution of polyvinylpyrrolidone-coated silver nanoparticles (PVP-AgNPs) was investigated under environmentally relevant conditions. The heteroaggregation of AgNPs with SS was not observed at low ionic strength (≤0.01 M) due to high electrostatic repulsion and steric forces. At higher NaCl concentrations (0.1 and 0.3 M), PVP-AgNPs were found to attach onto the SS surface, and the formation of AgNP-SS heteroaggregates strongly promoted settling of PVP-AgNPs due to the overwhelming gravity force. PVP-AgNP dissolution was reduced after the addition of sediment to ultrapure water because the presence of sediment-associated dissolved organic matter (SS-DOM). The formation of an AgCl layer on PVP-AgNP surface in 0.01 M NaCl solution resulted in the minor effect of SS on AgNP dissolution. After addition of SS, the dissolved silver concentrations of PVP-AgNP increased in 0.1 and 0.3 M NaCl solution. The interactions of SS-DOM with AgNPs under different NaCl concentrations interfered the dissolution of AgNPs in sediment-laden water. This study provides new insight into the fate of AgNPs in sediment-laden water under various environmental conditions.

Antibacterial Electrospun Polycaprolactone Membranes Coated with Polysaccharides and Silver Nanoparticles for Guided Bone and Tissue Regeneration

Electrospun polycaprolactone (PCL) membranes have been widely explored in the literature as a solution for several applications in tissue engineering and regenerative medicine. PCL hydrophobicity and its lack of bioactivity drastically limit its use in the medical field. To overcome these drawbacks, many promising strategies have been developed and proposed in the literature. In order to increase the bioactivity of electrospun PCL membranes designed for guided bone and tissue regeneration purposes, in the present work, the membranes were functionalized with a coating of bioactive lactose-modified chitosan (CTL). Since CTL can be used for the synthesis and stabilization of silver nanoparticles, a coating of this compound was employed here to provide antibacterial properties to the membranes. Scanning electron microscopy imaging revealed that the electrospinning process adopted here allowed us to obtain membranes with homogeneous fibers and without defects. Also, PCL membranes retained their mechanical properties after several weeks of aging in simulated body fluid, representing a valid support for cell growth and tissue development. CTL adsorption on membranes was investigated by fluorescence microscopy using fluorescein-labeled CTL, resulting in a homogeneous and slow release over time. Inductively coupled plasma-mass spectrometry was used to analyze the release of silver, which was shown to be stably bonded to the CTL coating and to be slowly released over time. The CTL coating improved MG63 osteoblast adhesion and proliferation on membranes. On the other hand, the presence of silver nanoparticles discouraged biofilm formation by Pseudomonas aeruginosa and Staphylococcus aureus without being cytotoxic. Overall, the stability and the biological and antibacterial properties make these membranes a valid and versatile material for applications in guided tissue regeneration and in other biomedical fields like wound healing.

Characterizing the effects of titanium dioxide and silver nanoparticles released from painted surfaces due to weathering on zebrafish (Danio rerio)

Silver (nAg) and titanium dioxide nanoparticles (nTiO₂) are common engineered nanoparticles (ENPs) added into paint for their antimicrobial and whitening properties, respectively. Weathering of outdoor painted surfaces can release such ENPs, though little is known about the potential effects of released ENPs on aquatic species. The objective of this study was to characterize the toxicity of nAg and nTiO₂ released from painted panels using fish liver cells (CRL2643) and zebrafish embryos (OECD 236 embryotoxicity test). Cells and embryos were exposed to suspensions of pristine nAg or nTiO₂, panels (unpainted or painted with nAg or nTiO₂) or base paint, after sonication. Cell viability and gene expression were assessed using resazurin assay and qPCR, respectively, while embryo mortality and deformities were scored visually via microscopic examination. In the cell studies, both paint-released nanoparticles did not affect viability, but paint-released nAg resulted in differential expression of a few genes including gclc and ncf1. In embryos, paint-released nAg increased mortality and incidence of deformities, whereas paint-released nTiO₂ resulted in differential expression of several genes including gclc, ncf1, txnrd1, gpx1b, and cyp1c1 but without major phenotypic abnormalities. Comparing the two types of exposures, paint-released exposures affected both molecular (gene expression) and apical (embryotoxicity) endpoints, while pristine exposures affected the expression of some genes but had no apical effects. The differing effects of paint-released and pristine nanoparticle exposures suggest that further research is needed to further understand how paint coatings (and the products of their weathering and aging) may influence nanoparticle toxicity to aquatic organisms.

Silver Nanoparticles Induce a Triclosan-Like Antibacterial Action Mechanism in Multi-Drug Resistant Klebsiella pneumoniae

Infections associated with antimicrobial-resistant bacteria now represent a significant threat to human health using conventional therapy, necessitating the development of alternate and more effective antibacterial compounds. Silver nanoparticles (Ag NPs) have been proposed as potential antimicrobial agents to combat infections. A complete understanding of their antimicrobial activity is required before these molecules can be used in therapy. Lysozyme coated Ag NPs were synthesized and characterized by TEM-EDS, XRD, UV-vis, FTIR spectroscopy, zeta potential, and oxidative potential assay. Biochemical assays and deep level transcriptional analysis using RNA sequencing were used to decipher how Ag NPs exert their antibacterial action against multi-drug resistant Klebsiella pneumoniae MGH78578. RNAseq data revealed that Ag NPs induced a triclosan-like bactericidal mechanism responsible for the inhibition of the type II fatty acid biosynthesis. Additionally, released Ag+ generated oxidative stress both extra- and intracellularly in K. pneumoniae. The data showed that triclosan-like activity and oxidative stress cumulatively underpinned the antibacterial activity of Ag NPs. This result was confirmed by the analysis of the bactericidal effect of Ag NPs against the isogenic K. pneumoniae MGH78578 ΔsoxS mutant, which exhibits a compromised oxidative stress response compared to the wild type. Silver nanoparticles induce a triclosan-like antibacterial action mechanism in multi-drug resistant K. pneumoniae. This study extends our understanding of anti-Klebsiella mechanisms associated with exposure to Ag NPs. This allowed us to model how bacteria might develop resistance against silver nanoparticles, should the latter be used in therapy.

Food and Beverage Ingredients Induce the Formation of Silver Nanoparticles in Products Stored within Nanotechnology-Enabled Packaging

Nanotechnology-based packaging may improve food quality and safety, but packages manufactured with polymer nanocomposites (PNCs) could be a source of human dietary exposure to engineered nanomaterials (ENMs). Previous studies showed that PNCs release ENMs to foods predominantly in a dissolved state, but most of this work used food simulants like dilute acetic acid and water, leaving questions about how substances in real foods may influence exposure. Here, we demonstrate that food and beverage ingredients with reducing properties, like sweeteners, may alter exposure by inducing nanoparticle formation in foods contacting silver nanotechnology-enabled packaging. We incorporated 12.8 ± 1.4 nm silver nanoparticles (AgNPs) into polyethylene and stored media containing reducing ingredients in packages manufactured from this material under accelerated room-temperature and refrigerated conditions. Analysis of the leachates revealed that reducing ingredients increased the total silver transferred to foods contacting PNC packaging (by as much as 7-fold) and also induced the (re)formation of AgNPs from this dissolved silver during storage. AgNP formation was also observed when Ag⁺ was introduced to solutions of natural and artificial sweeteners (glucose, sucrose, aspartame), commercial beverages (soft drinks, juices, milk), and liquid foods (yogurt, starch slurry), and the amount and morphology of reformed AgNPs depended on the ingredient formulation, silver concentration, storage conditions, and light exposure. These results imply that food and beverage ingredients may influence dietary exposure to nanoparticles when PNCs are used in packaging applications, and the practice of using food simulants may in certain cases underpredict the amount of ENMs likely to be found in foods stored in these materials.

Transport of environmental natural organic matter coated silver nanoparticle across cell membrane based on membrane etching treatment and inhibitors

Environmental natural organic matters (NOMs) have great effects on the physicochemical properties of engineering nanoparticles, which may impact the transport of nanoparticles across plasma membrane and the cytotoxicity. Therefore, the kinetics, uptake pathway and mass of transporting into A549 cell membrane of silver nanoparticles (AgNPs) coated with citric acid (CA), tartaric acid (TA) and fulvic acid (FA) were investigated, respectively. CA, FA and TA enhanced the colloidal stability of AgNPs in culture medium and have greatly changed the surface plasmon resonance spectrum of AgNPs due to the absorption of CA, FA and TA on surface of AgNPs. Internalizing model showed that velocity of CA-, TA- and FA-nAg transporting into A549 cell were 5.82-, 1.69- and 0.29-fold higher than those of the control group, respectively. Intracellular mass of Ag was dependent on mass of AgNPs delivered to cell from suspension, which obeyed Logistic model and was affected by NOMs that CA- and TA-nAg showed a large promotion on intracellular mass of Ag. The lipid raft/caveolae-mediated endocytosis (LME) of A549 cell uptake of AgNPs were susceptible to CA, TA and FA that uptake of CA-, TA- and FA-nAg showed lower degree of dependent on LME than that of the control (uncoated AgNPs). Actin-involved uptake pathway and macropinocytosis would have less contribution to uptake of FA-nAg. Overall, transmembrane transport of NOMs-coated AgNPs differs greatly from that of the pristine AgNPs.

Developments in the Application of Nanomaterials for Water Treatment and Their Impact on the Environment

Nanotechnology is an uppermost priority area of research in several nations presently because of its enormous capability and financial impact. One of the most promising environmental utilizations of nanotechnology has been in water treatment and remediation where various nanomaterials can purify water by means of several mechanisms inclusive of the adsorption of dyes, heavy metals, and other pollutants, inactivation and removal of pathogens, and conversion of harmful materials into less harmful compounds. To achieve this, nanomaterials have been generated in several shapes, integrated to form different composites and functionalized with active components. Additionally, the nanomaterials have been added to membranes that can assist to improve the water treatment efficiency. In this paper, we have discussed the advantages of nanomaterials in applications such as adsorbents (removal of dyes, heavy metals, pharmaceuticals, and organic contaminants from water), membrane materials, catalytic utilization, and microbial decontamination. We discuss the different carbon-based nanomaterials (carbon nanotubes, graphene, graphene oxide, fullerenes, etc.), and metal and metal-oxide based nanomaterials (zinc-oxide, titanium dioxide, nano zerovalent iron, etc.) for the water treatment application. It can be noted that the nanomaterials have the ability for improving the environmental remediation system. The examination of different studies confirmed that out of the various nanomaterials, graphene and its derivatives (e.g., reduced graphene oxide, graphene oxide, graphene-based metals, and graphene-based metal oxides) with huge surface area and increased purity, outstanding environmental compatibility and selectivity, display high absorption capability as they trap electrons, avoiding their recombination. Additionally, we discussed the negative impacts of nanomaterials such as membrane damage and cell damage to the living beings in the aqueous environment. Acknowledgment of the possible benefits and inadvertent hazards of nanomaterials to the environment is important for pursuing their future advancement.

Nanomaterial Transformations in the Environment: Effects of Changing Exposure Forms on Bioaccumulation and Toxicity

In the environment, nanomaterials (NMs) are subject to chemical transformations, such as redox reactions, dissolution, coating degradation, and organic matter, protein, and macromolecule binding, and physical transformations including homo or heteroagglomeration. The combination of these reactions can result in NMs with differing characteristics progressing through a functional fate pathway that leads to the formation of transformed NM functional fate groups with shared properties. To establish the nature of such effects of transformation on NMs, four main types of studies are conducted: 1) chemical aging for transformation of pristine NMs; 2) manipulation of test media to change NM surface properties; 3) aging of pristine NMs water, sediment, or soil; 4) NM aging in waste streams and natural environments. From these studies a paradigm of aging effects on NM uptake and toxicity can be developed. Transformation, especially speciation changes, largely results in reduced potency. Further reactions at the surface resulting in processes, such as ecocorona formation and heteroagglomeration may additionally reduce NM potency. When NMs of differing potency transform and enter environments, common transformation reaction occurring in receiving system may act to reduce the variation in hazard between different initial NMs leading to similar actual hazard under realistic exposure conditions.

Discovering the Importance of ClO• in a Coupled Electrochemical System for the Simultaneous Removal of Carbon and Nitrogen from Secondary Coking Wastewater Effluent

Inorganic constituents in real wastewater, such as halides and carbonates/bicarbonates, may have negative effects on the performance of electrochemical systems because of their capability of quenching HO^•. However, we discovered that the presence of Cl^- and HCO₃^- in an electrochemical system is conducive to the formation of ClO^•, which plays an important role in promoting the simultaneous elimination of biorefractory organics and nitrogen in secondary coking wastewater effluent. The 6-h operation of the coupled electrochemical system (an undivided electrolytic cell with a PbO₂/Ti anode and a Cu/Zn cathode) at a current density of 37.5 mA cm^-2 allowed the removal of 87.8% of chemical oxygen demand (COD) and 86.5% of total nitrogen. The electron paramagnetic resonance results suggested the formation of ClO^• in the system, and the probe experiments confirmed the predominance of ClO^•, whose steady-state concentrations (8.08 × 10^-13 M) were 16.4, 26.5, and 1609.5 times those of Cl₂^•- (4.92 × 10^-14 M), HO^• (3.05 × 10^-14 M), and Cl^• (5.02 × 10^-16 M), respectively. The rate constant of COD removal and the Faradaic efficiency of anodic oxidation obtained with Cl^- and HCO₃^- was linearly proportional to the natural logarithm of the ClO^• concentration, and the specific energy consumption was inversely correlated to it, demonstrating the crucial role of ClO^• in pollutant removal.

Stability of Nano-ZnO in simulated landfill leachate containing heavy metal ions

As the presence of nanosized zinc oxide particles (nano-ZnO) in landfill leachate increases, their interaction with coexisting heavy metal ions (HMs) also increases. The interface interaction between nano-ZnO and HMs will influence nano-ZnO stability and therefore affect its bioavailability and environmental impact. In the present study, we investigated the effects of Cu(II), Cr(III), and Cr(VI) ions on the aggregation, sedimentation, and dissolution of nano-ZnO using batch experiments with a view to better understanding their co-effect on the environment. Dynamic light scattering and UV-Vis spectroscopy results show enhanced aggregation of nano-ZnO in the presence of Cr(VI) ions under fresh landfill leachate conditions, in addition to distinct sedimentation of nano-ZnO in the presence of Cr(III) ions in both fresh and aged landfill leachate. In fresh leachate, Cu(II) ions improved the concentration of dissolved Zn from nano-ZnO. However, the effects of Cu(II), Cr(III), and Cr(VI) ions on the aggregation and dissolution of nano-ZnO were markedly reduced in aged landfill leachate. Both acetic and humic acids in landfill leachate significantly affected the stability of nano-ZnO in the presence of HMs. According to the ATR-FTIR results, Cr(III) ions reacted with hydroxyl groups on nano-ZnO to form ZnO-O bonds, which induced chains of nano-ZnO and Cr(III) complexes, and hence the increased of nano-ZnO aggregates. ATR-FTIR shows merely electrostatic adsorption effects between nano-ZnO and Cu(II) or Cr(VI) ions. In brief, the mode of interactions between HMs and nano-ZnO influenced the stability via adsorption and binding effects. The results of the present research provide insight into the potential effects of nano-ZnO on the environment in the presence of HMs in landfill leachate.

Silver nanoparticles: Toxicity in model organisms as an overview of its hazard for human health and the environment

Silver nanoparticles (AgNPs) have attracted remarkable attention due to their powerful antimicrobial action as well as their particular physicochemical properties. This has led to their application in a wide variety of products with promising results. However, their interaction with the environment and toxicity in live terrestrial or aquatic organisms is still a matter of intense debate. More detailed knowledge is still required about the toxicity of AgNPs, their possible uptake mechanisms and their adverse effects in live organisms. Several studies have reported the interactions and potential negative effects of AgNPs in different organisms. In this review, we report and discuss the current state of the art and perspectives for the impact of AgNPs on different organisms present in the environment. Recent progress in interpreting uptake, translocation and accumulation mechanisms in different organisms and/or living animals are discussed, as well as the toxicity of AgNPs and possible tolerance mechanisms in live organisms to cope with their deleterious effects. Finally, we discuss the challenges of accurate physicochemical characterization of AgNPs and their ecotoxicity in environmentally realistic conditions such as soil and water media.

Addressing Nanomaterial Immunosafety by Evaluating Innate Immunity across Living Species

The interaction of a living organism with external foreign agents is a central issue for its survival and adaptation to the environment. Nanosafety should be considered within this perspective, and it should be examined that how different organisms interact with engineered nanomaterials (NM) by either mounting a defensive response or by physiologically adapting to them. Herein, the interaction of NM with one of the major biological systems deputed to recognition of and response to foreign challenges, i.e., the immune system, is specifically addressed. The main focus is innate immunity, the only type of immunity in plants, invertebrates, and lower vertebrates, and that coexists with adaptive immunity in higher vertebrates. Because of their presence in the majority of eukaryotic living organisms, innate immune responses can be viewed in a comparative context. In the majority of cases, the interaction of NM with living organisms results in innate immune reactions that eliminate the possible danger with mechanisms that do not lead to damage. While in some cases such interaction may lead to pathological consequences, in some other cases beneficial effects can be identified.

Transformation pathways and fate of engineered nanoparticles (ENPs) in distinct interactive environmental compartments: A review

The ever increasing production and use of nano-enabled commercial products release the massive amount of engineered nanoparticles (ENPs) in the environment. An increasing number of recent studies have shown the toxic effects of ENPs on different organisms, raising concerns over the nano-pollutants behavior and fate in the various environmental compartments. After the release of ENPs in the environment, ENPs interact with various components of the environment and undergoes dynamic transformation processes. This review focus on ENPs transformations in the various environmental compartments. The transformation processes of ENPs are interrelated to multiple environmental aspects. Physical, chemical and biological processes such as the homo- or hetero-agglomeration, dissolution/sedimentation, adsorption, oxidation, reduction, sulfidation, photochemically and biologically mediated reactions mainly occur in the environment consequently changes the mobility and bioavailability of ENPs. Physico-chemical characteristics of ENPs (particle size, surface area, zeta potential/surface charge, colloidal stability, and core-shell composition) and environmental conditions (pH, ionic strength, organic and inorganic colloids, temperature, etc.) are the most important parameters which regulated the ENPs environmental transformations. Meanwhile, in the environment, organisms encountered multiple transformed ENPs rather than the pristine nanomaterials due to their interactions with various environmental materials and other pollutants. Thus it is the utmost importance to study the behavior of transformed ENPs to understand their environmental fate, bioavailability, and mode of toxicity.

Occurrence of Cerium-, Titanium-, and Silver-Bearing Nanoparticles in the Besòs and Ebro Rivers

The presence of anthropogenic nanoparticles (NPs) in the aquatic environment has become an emerging concern in terms of environmental and health safety. In the present study, we assessed the presence of Ag-bearing, Ti-bearing, and Ce-bearing NPs in the Barcelona catchment area, including the Besòs River basin and the Barcelona coast, and in the Ebro River Delta, using single particle inductively coupled plasma mass spectrometry (sp-ICP-MS). Ti-NPs and Ce-NPs were ubiquitously detected in surface waters, and their presence was related to a high natural background. Concentrations of Ti-NPs ranged from 23.2 × 10⁶ to 298 × 10⁶ Ti-NPs/L, with high concentrations being detected in areas with little anthropogenic pressure, while the presence of nanosilver (17.9 × 10⁶ to 45.1 × 10⁶ Ag-NPs/L) in the analyzed rivers was limited to certain hotspots close to wastewater treatment plants discharge points. The concentrations of Ce-NPs in the river ranged from 18.1 × 10⁶ to 278 × 10⁶ NPs/L, and they were related to the natural occurrence of the mineral Monazite-(Ce). Overall, the concentrations of these nanomaterials in the Barcelonan coast were significantly attenuated by river-sea environmental dilution. Nevertheless, Ce-NPs were eventually detected in some seawater samples with low levels of lanthanum-NPs, suggesting anthropogenic inputs of nanoCeO₂, probably from atmospheric deposition.

Dynamic nano-Ag colloids cytotoxicity to and accumulation by Escherichia coli: Effects of Fe3+, ionic strength and humic acid

Released Ag ions or/and Ag particles are believed to contribute to the cytotoxicity of Ag nanomaterials, and thus, the cytotoxicity and mechanism of Ag nanomaterials should be dynamic in water due to unfixed Ag particle:Ag⁺ ratios. Our recent research found that the cytotoxicity of PVP-Ag nanoparticles is attributable to Ag particles alone in 3 hr bioassays, and shifts to both Ag particles and released Ag⁺ in 48 hr bioassays. Herein, as a continued study, the cytotoxicity and accumulation of 50 and 100 nm Ag colloids in Escherichia coli were determined dynamically. The cytotoxicity and mechanisms of nano-Ag colloids are dynamic throughout exposure and are derived from both Ag ions and particles. Ag accumulation by E. coli is derived mainly from extracellular Ag particles during the initial 12 hr of exposure, and thereafter mainly from intracellular Ag ions. Fe³⁺ accelerates the oxidative dissolution of nano-Ag colloids, which results in decreasing amounts of Ag particles and particle-related toxicity. Na⁺ stabilizes nano-Ag colloids, thereby decreasing the bioavailability of Ag particles and particle-related toxicity. Humic acid (HA) binds Ag⁺ to form Ag⁺-HA, decreasing ion-related toxicity and binding to the E. coli surface, decreasing particle-related toxicity. HA in complex conditions showed a stronger relative contribution to toxicity and accumulation than Na⁺ or Fe³⁺. The results highlighted the cytotoxicity and mechanism of nano-Ag colloids are dynamic and affected by environmental factors, and therefore exposure duration and water chemistry should be seriously considered in environmental and health risk assessments.

Antimicrobial efficacy and mechanisms of silver nanoparticles against Phanerochaete chrysosporium in the presence of common electrolytes and humic acid

In this study, influences of cations (Na⁺, K⁺, Ca²⁺, and Mg²⁺), anions (NO₃^-, Cl^-, and SO₄^2-), and humic acid (HA) on the antimicrobial efficacy of silver nanoparticles (AgNPs)/Ag⁺ against Phanerochaete chrysosporium were investigated by observing cell viability and total Ag uptake. K⁺ enhanced the antimicrobial toxicity of AgNPs on P. chrysosporium, while divalent cations decreased the toxicity considerably, with preference of Ca²⁺ over Mg²⁺. Impact caused by a combination of monovalent and divalent electrolytes was mainly controlled by divalent cations. Compared to AgNPs, however, Ag⁺ with the same total Ag content exhibited stronger antimicrobial efficacy towards P. chrysosporium, regardless of the type of electrolytes. Furthermore, HA addition induced greater microbial activity under AgNP stress, possibly originating from stronger affinity of AgNPs over Ag⁺ to organic matters. The obtained results suggested that antimicrobial efficacy of AgNPs was closely related to water chemistry: addition of divalent electrolytes and HA reduced the opportunities directly for AgNP contact and interaction with cells through formation of aggregates, complexes, and surface coatings, leading to significant toxicity reduction; however, in monovalent electrolytes, the dominating mode of action of AgNPs could be toxic effects of the released Ag⁺ on microorganisms due to nanoparticle dissolution.

Environmental fate and behavior of silver nanoparticles in natural estuarine systems

Silver nanoparticles (AgNPs) are widely used in many consumer products, whereas their environmental behaviors in natural aquatic systems remain unknown, especially in natural brackish media. Therefore, it is urgent to investigate the environmental fate of AgNPs in natural brackish waters. Here, we investigated the stability of citrate-coated AgNPs in natural brackish water collected from 6 different sites with distinct salinities in the Xinglinwan Reservoir, located in Xiamen City, southeast China. The obtained results showed that AgNP colloids remained stable in low-salinity waters, which was mainly determined by the effects of dissolved organic matter (DOM) promoting the stability of the nanoparticles. However, the environmental fate of AgNPs in high-salinity waters was dominated by the salinity or ionic strength, especially the free ion concentrations of Cl^-, SO₄^2-, or S^2-, resulting in rapid sedimentation and dissolution. In addition, both DOM and salinity contributed to the environmental behavior of AgNPs in moderate-salinity waters, ultimately resulting in either colloidal stability or sedimentation. Overall, these results may reveal that AgNPs remain relatively stable for a long period in low-salinity natural waters, and that the stability might gradually decrease as AgNPs are transferred from freshwaters through brackish waters and eventually end up in seawater along the bay. Our findings also further indicate that the toxicity and potential risks of AgNPs may present more serious threats to the environment and organisms in natural freshwaters than in natural estuarine systems or seawater.

Effects of Chloride Concentration on the Water Disinfection Performance of Silver Containing Nanocellulose-based Composites

The availability of microbially-safe drinking water is a challenge in many developing regions. Due to the well-known antibacterial effect of silver ions, materials used for their controlled release have been widely studied for point-of-use water disinfection. However, even if it is in principle known that chloride anions can suppress the antibacterial efficiency of silver, the majority of previous studies, surprisingly, have not focused on chloride concentrations relevant for freshwaters and thus for practical applications. Here, we prepared low-cost nanocellulose-aluminium oxyhydroxide nanocomposites functionalized with silver nanoparticles. Field samples obtained from Chennai, India were used as a guideline for choosing relevant chloride concentrations for the antibacterial studies, i.e., 10, 90, and 290 ppm. The antibacterial performance of the material against Escherichia coli and Bacillus subtilis was demonstrated and the influence of chloride concentration on the antibacterial effect was studied with E. coli. A 1 h contact time led to bacterial reductions of 5.6 log₁₀, 2.9 log₁₀, and 2.2 log₁₀, respectively. This indicates that an increase of chloride concentration leads to a substantial reduction of antibacterial efficiency, even within chloride concentrations found in freshwaters. This work enables further insights for designing freshwater purification systems that utilize silver-releasing materials.

Soil chloride content influences the response of bacterial but not fungal diversity to silver nanoparticles entering soil via wastewater treatment processing

Silver nanoparticles (NPs) are among the most widely used nanomaterials and are entering soil ecosystems, mainly via biosolids in agriculture. When added directly to soils, metallic Ag-NPs have been shown to affect microbial communities, which underpin important ecosystem functions. During wastewater treatment processing, metallic Ag-NPs are rapidly converted to Ag₂S, which is relatively insoluble and less toxic. Furthermore, recent evidence indicates that silver bioavailability is influenced by soil chloride content. Hence there is a need to understand how Ag₂S, which forms from Ag-NPs during wastewater treatment, influences soil microbial diversity at varying salinity. In this study, after adding Ag-NPs to sludge (with most converted to Ag₂S), we then applied the sludge to soil and examined how salinity influences the effects of 0 mg, 1 mg and 10 mg kg^-1 Ag on bacterial and fungal diversity over time. Using high-throughput phylogenetic marker gene sequencing of 16S rRNA gene and ITS2 amplicons, we demonstrate that, despite being theoretically less toxic, wastewater treatment processed Ag-NPs can affect the composition of soil bacterial and fungal communities, and influence bacterial alpha diversity. In addition, we found that silver-associated changes in bacterial community composition were affected by soil chloride content, with more acute responses to silver being observed in more saline soils. This work highlights that the release of Ag-NPs and their conversion into Ag₂S prior to addition to soils via realistic exposure pathways can alter microbial diversity and that these effects may be influenced by soil chloride content.

Roles of Silver-Chloride Complexations in Sunlight-Driven Formation of Silver Nanoparticles

In aerobic natural surface water, a silver ion (Ag⁺) exists in various Ag⁺-Cl^- complexes because of a strong affinity for a chloride ion (Cl^-); however, little information is available about the role of the Ag⁺-Cl^- complex in the formation of silver nanoparticles (AgNPs). This study demonstrates that soluble AgCl_x^(x-1)- species act as a precursor of AgNPs under simulated sunlight irradiation. The AgNP photoproduction increases with Cl^- levels up to 0.0025 M ([Ag⁺] = 5 × 10^-7 M) and decreases with continued Cl^- level increase (0.09 to 0.5 M). At [Cl^-] ≤ 0.0025 M (freshwater systems), photoproduction of AgNP correlates with the formation of AgCl_(aq), suggesting that it is the most photoactive species in those systems. Matching the ionic strength of experiments containing various Cl^- levels indicates that the trend in AgNP photoproduction correlates with Cl^- concentrations rather than ionic strength-induced effects. The photoproduction of AgNPs is highly pH-dependent, especially at pH > 8.3. The UV and visible light portions of the solar light spectrum are equally important in photoreduction of Ag⁺. Overall, we show evidence that AgCl_x^(x-1)- species irradiated under sunlight conditions contributes to the formation of nanosized silver (Ag) in the environment.

Morphological Transformation of Silver Nanoparticles from Commercial Products: Modeling from Product Incorporation, Weathering through Use Scenarios, and Leaching into Wastewater

There is increasing interest in the environmental fate and effects of engineered nanomaterials due to their ubiquitous use in consumer products. In particular, given the mounting evidence that dramatic transformations can occur to a nanomaterial throughout its product lifecycle, the appropriateness of using pristine nanomaterials in environmental testing is being questioned. Using a combination of transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma-mass spectrometry (ICP-MS), this work examines the morphological and compositional effects of conditions mimicking a typical lifecycle of a nano-enabled product, from the production of the silver nanoparticle (AgNP)-laden textiles, through its use, laundering, and then finally, its leaching and incubation in the wastewater collection system. These simulated weathering conditions showed evidence for the transformation of AgNPs into AgCl and Ag₂S. Incubation in raw wastewater had the most dramatic effect on the AgNPs in terms of transformation, no matter what initial weathering was applied to the NPs prior to incubation. However, despite extensive transformation noted, AgNPs were still present within all the samples after the use scenarios.

Antibacterial performance of polymer quaternary ammonium salt-capped silver nanoparticles on Bacillus subtilis in water

In this study, we prepared polymer quaternary ammonium salt–capped silver nanoparticles (PQAS–AgNPs) and investigated their antimicrobial activities. The antimicrobial effectiveness of PQAS–AgNPs on Bacillus subtilis (B. subtilis), and the effect of dose, pH, chloride ion and humic acid (HA) were studied. It was found that PQAS–AgNPs revealed excellent antimicrobial activity to B. subtilis, compared with polyvinylpyrrolidone-capped silver nanoparticles (PVP-AgNPs), which was the reference antimicrobial material. The positive surface, the antimicrobial activity of PQAS, and the synergistic antibacterial effect between PQAS and AgNPs contributed to the significant antibacterial superiority of PQAS–AgNPs. This study demonstrated that the impact of the dose of the material was positive and the microbiocidal efficacy of PQAS–AgNPs was stronger at lower pH. In addition, the antibacterial performance of PQAS–AgNPs decreased in the presence of Cl⁻ and HA. Finally, in combination with the results of FCM and adenosine triphosphate (ATP) content, it was found that PQAS–AgNPs destroyed the respiratory chain of bacterial cells, reduced the synthesis of ATP, and destroyed the cell wall and cell membrane function.

Polymer quaternary ammonium salt–capped silver nanoparticles (PQAS–AgNPs) were synthesized, and they exhibited significant antibacterial capacity against Bacillus subtilis.

Effects of Silver Nitrate are a Conservative Estimate for the Effects of Silver Nanoparticles on Algae Growth and Daphnia magna Reproduction

Silver (Ag) salts have been shown to be highly toxic to freshwater organisms. There is nevertheless still a high level of uncertainty as to the aquatic effects of Ag nanoparticles (AgNPs), and how these relate to the effects of soluble Ag salts. As part of the substance evaluation for Ag of the European Union Registration, Evaluation, Authorisation, and Restriction of Chemicals regulation, we have generated new data to justify read-across from soluble Ag salts to AgNPs. The aquatic toxicity to algae growth and Daphnia magna reproduction, fate, and behavior of AgNO₃ versus AgNPs were tested and compared. Chloride salts in the test media were replaced with equimolar concentrations of nitrate salts. Total Ag, "conventionally" dissolved Ag (0.45 µm), and "truly" dissolved Ag (3 kDa) were determined. Algae were the most sensitive test species to AgNO₃ (10% effect concentration [EC10] 0.10 µg Ag/L) when expressed as conventionally dissolved Ag. The corresponding value for AgNPs was 0.26 µg/L. For D. magna reproduction, the lowest EC10 values were 3.49 µg Ag/L for AgNO₃ and 33.4 µg Ag/L for AgNPs. Using measured Ag concentrations, AgNO₃ was experimentally shown to be more toxic than AgNPs for all Ag fractions. We explain these observations by a different dissolution behavior of AgNO₃ versus AgNPs. The results provide experimental confirmation that AgNO₃ can be used as a conservative estimate for the aquatic effects of AgNPs at comparable Ag concentrations. Environ Toxicol Chem 2019;38:1701-1713. © 2019 SETAC.

Silver Nanowire-Modified Filter with Controllable Silver Ion Release for Point-of-Use Disinfection

Waterborne diseases related to unsafe water are still major threats to public health in some developing countries and rural areas. Providing affordable and safe drinking water globally remains a great challenge in the coming decades. In this study, we develop a high-throughput and conductive silver nanowire (AgNW)-modified composite filter via depositing thin and ultralong AgNWs on a macroporous substrate. An electrochemical filtration cell (EFC) equipped with the composite filter achieves controllable Ag⁺ release at a μg L^-1 level and superior bacterial inactivation performance (>6-log inactivation efficiency) with an operation voltage of only 1 V at a high flux of 100 m³ h^-1 m^-2. Under such operation conditions, each composite filter (effective area: 0.79 cm²) can treat at least 750 mL of the bacterial suspension (∼10⁷ CFU mL^-1 of Escherichia coli) with a low effluent Ag⁺ concentration below 50 μg L^-1 and almost negligible energy consumption of only ∼70 J m^-3.