Organic aerosols associated with the generation of reactive oxygen species (ROS) by water-soluble PM2.5

Effects of chemical composition of ambient PM2.5 measured in Seoul on potential health risks and generation of reactive oxygen species

This study assesses the health effects associated with the chemical species of ambient particulate matter (PM) with an aerodynamic diameter ≤2.5 μm (PM2.5) in Seoul, focusing on identifying key chemical constituents and their sources. We employed two approaches to estimate health risks: (1) evaluating carcinogenic and noncarcinogenic risks using IRIS (Integrated Risk Information System) data from the US EPA (Environmental Protection Agency), and (2) quantifying the generation of hydroxyl radicals (·OH) following exposure to PM2.5 in surrogate lung fluid (SLF). Our results show a significant impact on human health from certain elements (Cr, Ni, As, and Cd) and polycyclic aromatic hydrocarbons (PAHs) (DaeP, DahA, and BaP for carcinogenic risks; BaP and BeP for noncarcinogenic risks). Notably, Cr and BaP, which are influential in both risk assessment and ·OH generation, highlight their significant roles in human health impacts. However, other components (e.g., CPP, BaP, BghiP, BaA, CHR, PYR, FLT, Ca, Mg, and Cu), though contributors to ·OH generation, were not included in the EPA's health risk assessment, suggesting a need for a broader PM2.5 compositional analysis to more accurately determine exposure concentrations and assess inhalation risks. These components predominantly originate from anthropogenic sources, such as combustion, vehicles, and industrial activities, underscoring the significant health implications of the pollutants emitted from these sources. The study concluded that focusing solely on the mass reduction of PM2.5 may not suffice; a dual approach that reduces both mass concentration and chemical-specific health risks is imperative for effective public health protection.

Experimental factors influencing the bioaccessibility and the oxidative potential of transition metals from welding fumes

Inhalation of welding fumes (WFs) containing high levels of transition metals (Cr, Cu, Fe, Mn, Ni…) is associated with numerous health effects including oxidative stress. However, the measurements of the oxidative potential (OP) and bioaccessibility of WF transition metals depend on several physicochemical parameters and may be subject to several experimental artifacts. In this work, we investigated the influence of the experimental conditions that may affect the bioaccessibility of transition metals and their OP on stainless-steel WF extracts. WFs were produced using a generation bench and sampled on filters. The soluble fraction of the metals was analysed. Two different extraction fluids mimicking physiological pulmonary conditions were studied: phosphate buffer and Hatch's solution. Three extraction times were tested to determine the optimal time for a significant OPDTT using the dithiothreitol (DTT) method. The storage conditions of WFs after filter sampling such as duration, temperature and atmospheric conditions were investigated. The results indicate that experimental conditions can significantly affect the OPDTT and metal bioaccessibility analyses. Cr, Cu and Ni show higher solubility in Hatch's solution than in the phosphate buffer. Mn is highly sensitive to DTT and shows close solubility in the two fluids. An extraction time of 0.5 h in phosphate buffer allows a better sensitivity to OPDTT, probably by limiting complexations, interactions between metals and precipitation. Storage time and temperature can influence the physical or chemical evolution of the WFs, which can affect their OPDTT and Mn solubility. However, storage under N2(g) limits these changes. On-line measurements of OPDTT could provide an alternative to filter sampling to overcome these artifacts.

Redox-activity and in vitro effects of regional atmospheric aerosol pollution: Seasonal differences and correlation between oxidative potential and in vitro toxicity of PM1

Particulate Matter (PM) is a complex and heterogeneous mixture of atmospheric particles recognized as a threat to human health. Oxidative Potential (OP) measurement is a promising and integrative method for estimating PM-induced health impacts since it is recognized as more closely associated with adverse health effects than ordinarily used PM mass concentrations. OP measurements could be introduced in the air quality monitoring, along with the parameters currently evaluated. PM deposition in the lungs induces oxidative stress, inflammation, and DNA damage. The study aimed to compare the OP measurements with toxicological effects on BEAS-2B and THP-1 cells of winter and summer PM1 collected in the Po Valley (Italy) during 2021. PM1 was extracted in deionized water by mechanical agitation and tested for OP and, in parallel, used to treat cells. Cytotoxicity, genotoxicity, oxidative stress, and inflammatory responses were assessed by MTT test, DCFH-DA assay, micronucleus, γ-H2AX, comet assay modified with endonucleases, ELISA, and Real-Time PCR. The evaluation of OP was performed by applying three different assays: dithiothreitol (OPDTT), ascorbic acid (OPAA), and 2',7'-dichlorofluorescein (OPDCFH), in addition, the reducing potential was also analysed (RPDPPH). Seasonal differences were detected in all the parameters investigated. The amount of DNA damage detected with the Comet assay and ROS formation highlights the presence of oxidative damage both in winter and in summer samples, while DNA damage (micronucleus) and genes regulation were mainly detected in winter samples. A positive correlation with OPDCFH (Spearman's analysis, p < 0.05) was detected for IL-8 secretion and γ-H2AX. These results provide a biological support to the implementation in air quality monitoring of OP measurements as a useful proxy to estimate PM-induced cellular toxicological responses. In addition, these results provide new insights for the assessment of the ability of secondary aerosol in the background atmosphere to induce oxidative stress and health effects.

The Impact of Russia-Ukraine geopolitical conflict on the air quality and toxicological properties of ambient PM2.5 in Milan, Italy

The geopolitical conflict between Russia and Ukraine has disrupted Europe's natural gas supplies, driving up gas prices and leading to a shift towards biomass for residential heating during colder months. This study assessed the consequent air quality and toxicological impacts in Milan, Italy, focusing on fine particulate matter (PM2.5, dp < 2.5 μm) emissions. PM2.5 samples were analyzed for their chemical composition and assessed for their oxidative potential using the dithiothreitol (DTT) assay across three periods reflecting residential heating deployment (RHD): pre-RHD, intra-RHD, and post-RHD periods. During the intra-RHD period, PM2.5 levels were significantly higher than those in other periods, with concentrations reaching 57.94 ± 7.57 μg/m3, indicating a deterioration in air quality. Moreover, levoglucosan was 9.2 times higher during the intra-RHD period compared to the pre-RHD period, correlating with elevated levels of elemental carbon (EC) and polycyclic aromatic hydrocarbons (PAHs). These findings were compared with previous local studies before the conflict, underscoring a significant rise in biomass-related emissions. DTT assay levels during the intra-RHD were 2.1 times higher than those observed during the same period in 2022, strongly correlating with biomass burning emissions. Our findings highlight the necessity for policies to mitigate the indirect health effects of increased biomass burning emissions due to the energy crisis triggered by the geopolitical conflict.

Acidity and oxidative potential of atmospheric aerosols over a remote mangrove ecosystem during the advection of anthropogenic plumes

To investigate the acidity and the water-soluble oxidative potential of PM10, during the continental biomass-burning plume transport, a three-year (2018-2020) winter-time campaign was conducted over a pristine island (21.35°N, 88.32°E) of Sundarban mangrove ecosystem situated at the shore of Bay of Bengal. The average PM10 concentration over Sundarban was found to be 98.3 ± 22.2 μg m-3 for the entire study period with a high fraction of non-sea-salt- SO42- and water-soluble organic carbons (WSOC) that originated from the regional solid fuel burning. The thermodynamic E-AIM(IV) model had estimated that the winter-time aerosols over Sundarban were acidic (pH:2.4 ± 0.6) and mainly governed by non-sea-salt-SO42-. The volume and mass normalized oxidative potential of PM10 was found to be 1.81 ± 0.40 nmol DTT min-1 m-3 and 18.4 ± 6.1 pmol DTT min-1 μg-1 respectively which are surprisingly higher than several urban atmospheres across the world including IGP. The acid-digested water-soluble transition metals (Cu, Mn) show higher influences in the oxidative potential (under high aerosol acidity) compared to the WSOC. The study revealed that the advection of regional solid fuel burning plume and associated non-sea-salt-SO42- is enhancing aerosol acidity and oxidative stress that in turn alters the intrinsic properties of aerosols over such marine ecosystems rich in ecology and bio-geochemistry.

Wildfire and African dust aerosol oxidative potential, exposure and dose in the human respiratory tract

Exposure to wildfire smoke and dust can severely affect air quality and health. Although particulate matter (PM) levels and exposure are well-established metrics linking to health outcomes, they do not consider differences in particle toxicity or deposition location in the respiratory tract (RT). Usage of the oxidative potential (OP) exposure may further shape our understanding on how different pollution events impact health. Towards this goal, we estimate the aerosol deposition rates, OP and resulting OP deposition rates in the RT for a typical adult Caucasian male residing in Athens, Greece. We focus on a period when African dust (1-3 of August 2021) and severe wildfires at the northern part of the Attika peninsula and the Evia island, Greece (4-18 of August 2021) affected air quality in Athens. During these periods, the aerosol levels increased twofold leading to exceedances of the World Health Organization (WHO) [15(5) μg m-3] PM10 (PM2.5) air quality standard by almost 100 %. We show that the OP exposure is 1.5-times larger during the wildfire smoke events than during the dust intrusion, even if the latter was present in higher mass loads - because wildfire smoke has a higher specific OP than dust. This result carries two important implications: OP exposure should be synergistically used with other metrics - such as PM levels - to efficiently link aerosol exposure with the resulting health effects, and, certain sources of air pollution (in our case, exposure to biomass burning smoke) may need to be preferentially controlled, whenever possible, owing to their disproportionate contribution to OP exposure and ability to penetrate deeper into the human RT.

Contribution of fossil and biomass-derived secondary organic carbon to winter water-soluble organic aerosols in Delhi, India

Delhi, among the world's most polluted megacities, is a hotspot of particulate matter emissions, with high contribution from organic aerosol (OA), affecting health and climate in the entire northern India. While the primary organic aerosol (POA) sources can be effectively identified, an incomplete source apportionment of secondary organic aerosol (SOA) causes significant ambiguity in the management of air quality and the assessment of climate change. Present study uses positive matrix factorization analysis on the water-soluble organic aerosol (WSOA) data from the offline-aerosol mass spectrometry (AMS). It revealed POA as the dominant source of WSOA, with biomass-burning OA (31-34 %) and solid fuel combustion OA (∼21 %) being two major contributors. Here we use water-solubility fingerprints to track the SOA precursors, such as oxalates or organic nitrates, instead of identifying them based on their O:C ratio. Non-fossil precursors dominate in more oxidized oxygenated organic carbon (MO-OOC) (∼90 %), a proxy for aged secondary organic carbon (SOC), by coupling offline-AMS with 14C measurements. On the contrary, the oxidation of fossil fuel emissions produces a large quantity of fresh fossil SOC, which accounts for ∼75 % of less oxidized oxygenated organic carbon (LO-OOC). Our study reveals that apart from major POA contributions, large fractions of fossil (10-14 %) and biomass-derived SOA (23-30 %) contribute significantly to the total WSOA load, having impact on climate and air quality of the Delhi megacity. Our study reveals that large-scale unregulated biomass burning was not only found to dominate in POA but was also observed to be a significant contributor to SOA with implications on human health, highlighting the need for effective control strategies.

Size-segregated characteristics of water-soluble oxidative potential in urban Xiamen: Potential driving factors and implications for human health

Oxidative potential (OP), defined as the ability of particulate matter (PM) to generate reactive oxygen species (ROS), has been considered as a potential health-related metric for PM. Particles with different sizes have different OP and deposition efficiencies in the respiratory tract and pose different health risks. In this study, size-segregated PM samples were collected at a coastal urban site in Xiamen, a port city in southeastern China, between August 2020 and September 2021. The water-soluble constituents, including inorganic ions, elements and organic carbon, were determined. Total volume-normalized OP based on the dithiothreitol assay was highest in spring (0.241 ± 0.033 nmol min-1 m-3) and lowest in summer (0.073 ± 0.006 nmol min-1 m-3). OP had a biomodal distribution with peaks at 0.25-0.44 μm and 1.0-1.4 μm in spring, summer, and winter and a unimodal pattern with peak at 0.25-0.44 μm in fall, which were different from the patterns of redox-active species. Variations in the seasonality of fine and coarse mode OP and their correlations with water-soluble constituents showed that the size distribution patterns of OP could be attributed to the combined effects of the size distributions of transition metals and redox-active organics and the interactions between them which varied with emissions, meteorological conditions and atmospheric processes. Respiratory tract deposition model indicated that the deposited OP and the toxic elements accounted for 47.9 % and 36.8 % of their measured concentrations, respectively. The highest OP doses and the excess lifetime carcinogenic risk (ELCR) were found in the head airway (>70 %). However, the size distributions of OP deposition and ELCR in the respiratory tract were different, with 63.9 % and 49.4 % of deposited ELCR and OP, respectively, coming from PM2.5. Therefore, attention must be paid to coarse particles from non-exhaust emissions and road dust resuspension.

Size-distribution and driving factors of aerosol oxidative potential in rural kitchen microenvironments of northeastern India

This study reports size-resolved dithiothreitol (DTT)-based oxidative potential (OP: total and water-soluble) in rural kitchens using liquefied petroleum gas (LPG), firewood (FW), and mixed biomass (MB) fuels in northeastern (NE) India. In comparison to LPG, volume-normalized total OP (OPtotal(v)DTT) was enhanced by a factor of ∼5 in biomass-using kitchens (74 ± 35 to 78 ± 42 nmol min-1 m-3); however, mass-normalized total OP (OPtotal(m)DTT) was similar between LPG and FW users and higher by a factor of 2 in MB-using kitchens. The water-insoluble OP (OPwi(v, m)DTT) fraction in OPtotal(v, m)DTT was greater than 50% across kitchens. Size distributions across kitchens and OPDTT categories ranged from unimodal to trimodal. OPws(v)DTT was driven by metals as well as organics across size fractions while OPwi(v)DTT was majorly constrained by metals with an increasing importance of organics in fine particles of biomass-using kitchens. Multiple linear regression analysis revealed that Cu and Ba explained 71% of the OPtotal(v)DTT variability in LPG-using kitchens, while water-soluble organic carbon (WSOC) and Ba were responsible for 44% variability in FW-using kitchens. Finally, the high internal dose of OPtotal(v)DTT (28-31 nmol min-1 m-3) in biomass-using kitchens established the severity of oxidative stress on the exposed population.

Research progress on the characteristics, sources, and environmental and potential health effects of water-soluble organic compounds in atmospheric particulate matter

Water-soluble organic compounds (WSOCs) have received extensive attention due to their indistinct chemical components, complex sources, negative environmental impact, and potential health effects. To the best of our knowledge, until now, there has been no comprehensive review focused on the research progress of WSOCs. This paper reviewed the studies on chemical constituent and characterization, distribution condition, sources, environmental impact, as well as the potential health effects of WSOCs in the past 13 years. Moreover, the main existing challenges and directions for the future research on WSOCs were discussed from several aspects. Because of the complex composition of WSOCs and many unknown individual components that have not been detected, there is still a need for the identification and quantification of WSOCs. As modern people spend more time in indoor environments, it is meaningful to fill the gaps in the component characteristics and sources of indoor WSOCs. In addition, although in vitro cell experiments have shown that WSOCs could induce cellular oxidative stress and trigger the inflammatory response, the corresponding mechanisms of action need to be further explored. The current population epidemiology research of WSOCs is missing. Prospectively, we propose to conduct a comprehensive and simultaneous analysis strategy for concentration screening, source apportionment, potential health effects, and action mechanisms of WSOCs based on high throughput omics coupled with machine learning simulation and prediction.

Insights the dominant contribution of biomass burning to methanol-soluble PM2.5 bounded oxidation potential based on multilayer perceptron neural network analysis in Xi'an, China

Atmospheric fine particulate matter (PM2.5) is associated with cardiorespiratory morbidity and mortality due to its ability to generate reactive oxygen species (ROS). Ambient PM2.5 samples were collected during heating and nonheating seasons in Xi'an, China, and the ROS-generation potential of PM2.5 was quantified using the dithiothreitol (DTT) assay. Additionally, positive matrix factorization combined with multilayer perceptron was employed to apportion sources contributing to the oxidation potential of PM2.5. Both the mass concentration of PM2.5 and the volume-based DTT activity (DTTv) were higher during the heating season than during the nonheating season. The primary contributors to DTTv were combustion (biomass and coal) sources during the heating season (>52 %), whereas secondary formation dominated DTT activity during the nonheating season (35.7 %). In addition, the secondary reaction process promoted the generation of intrinsic oxidation potential (OP) of sources. Among all the sources investigated (traffic source, industrial emission, mineral dust, biomass burning, secondary formation and coal combustion), the inherent oxidation potential of biomass burning was the highest, whereas that of mineral dust was the lowest. Our study indicates that anthropogenic sources, especially biomass burning, should be prioritized in PM2.5 toxicity control strategies.

A comprehensive review of the development of land use regression approaches for modeling spatiotemporal variations of ambient air pollution: A perspective from 2011 to 2023

Land use regression (LUR) models are widely used in epidemiological and environmental studies to estimate humans' exposure to air pollution within urban areas. However, the early models, developed using linear regressions and data from fixed monitoring stations and passive sampling, were primarily designed to model traditional and criteria air pollutants and had limitations in capturing high-resolution spatiotemporal variations of air pollution. Over the past decade, there has been a notable development of multi-source observations from low-cost monitors, mobile monitoring, and satellites, in conjunction with the integration of advanced statistical methods and spatially and temporally dynamic predictors, which have facilitated significant expansion and advancement of LUR approaches. This paper reviews and synthesizes the recent advances in LUR approaches from the perspectives of the changes in air quality data acquisition, novel predictor variables, advances in model-developing approaches, improvements in validation methods, model transferability, and modeling software as reported in 155 LUR studies published between 2011 and 2023. We demonstrate that these developments have enabled LUR models to be developed for larger study areas and encompass a wider range of criteria and unregulated air pollutants. LUR models in the conventional spatial structure have been complemented by more complex spatiotemporal structures. Compared with linear models, advanced statistical methods yield better predictions when handling data with complex relationships and interactions. Finally, this study explores new developments, identifies potential pathways for further breakthroughs in LUR methodologies, and proposes future research directions. In this context, LUR approaches have the potential to make a significant contribution to future efforts to model the patterns of long- and short-term exposure of urban populations to air pollution.

Predicting Atmospheric Water-Soluble Organic Mass Reversibly Partitioned to Aerosol Liquid Water in the Eastern United States

Water-soluble organic matter (WSOM) formed through aqueous processes contributes substantially to total atmospheric aerosol, however, the impact of water evaporation on particle concentrations is highly uncertain. Herein, we present a novel approach to predict the amount of evaporated organic mass induced by sample drying using multivariate polynomial regression and random forest (RF) machine learning models. The impact of particle drying on fine WSOM was monitored during three consecutive summers in Baltimore, MD (2015, 2016, and 2017). The amount of evaporated organic mass was dependent on relative humidity (RH), WSOM concentrations, isoprene concentrations, and NOx/isoprene ratios. Different models corresponding to each class were fitted (trained and tested) to data from the summers of 2015 and 2016 while model validation was performed using summer 2017 data. Using the coefficient of determination (R2) and the root-mean-square error (RMSE), it was concluded that an RF model with 100 decision trees had the best performance (R2 of 0.81) and the lowest normalized mean error (NME < 1%) leading to low model uncertainties. The relative feature importance for the RF model was calculated to be 0.55, 0.2, 0.15, and 0.1 for WSOM concentrations, RH levels, isoprene concentrations, and NOx/isoprene ratios, respectively. The machine learning model was thus used to predict summertime concentrations of evaporated organics in Yorkville, Georgia, and Centerville, Alabama in 2016 and 2013, respectively. Results presented herein have implications for measurements that rely on sample drying using a machine learning approach for the analysis and interpretation of atmospheric data sets to elucidate their complex behavior.

Chemical and oxidative properties of fine particulate matter from near-road traffic sources

The toxicity associated with the fine particulate matter (PM2.5) has not been well studied, particularly in relation to the emissions from on-road vehicles and other sources in low- and middle-income countries such as India. Thus, a study was conducted to examine the oxidative potential (OP) of PM2.5 at a roadside (RS) site with heavy vehicular traffic and an urban background (BG) site in Mumbai using the dithiothreitol (DTT) assay. Simultaneous gravimetric PM2.5 was measured at both sites and characterized for carbonaceous constituents and water-soluble trace elements and metals. Results depicted higher PM2.5, elemental carbon (EC), and organic carbon (OC) concentrations on the RS than BG (by a factor of 1.7, 4.6, and 1.2, respectively), while BG had higher water-soluble organic carbon (WSOC) levels (by a factor of 1.4) and a higher WSOC to OC ratio (86%), likely due to the dominance of secondary aerosol formation. In contrast, the measured OPDTTv at RS (8.9 ± 5.5 nmol/min/m3) and BG (8.1 ± 6.4 nmol/min/m3) sites were similar. However, OPDTTv at BG was higher during the afternoon, suggesting the influence of photochemical transformation on measured OPDTTv at BG. At RS, OC and redox-active metals (Cu, Zn, Mn, and Fe) were significantly associated with measured OP (p < 0.05), while at BG, WSOC was most strongly associated (p < 0.05). The coefficient of divergence (COD) for PM2.5, its chemical species, and OPDTTv was >0.2, indicating spatial heterogeneity between the sites, and differences in emission sources and toxicity. The estimated hazard index (HI) was not associated with OPDTTv, indicating that current PM2.5 mass regulations may not adequately capture the health effects of PM2.5. The study highlights the need for further studies examining PM2.5 toxicity and developing toxicity-based air quality regulations.

Oxidized and Unsaturated: Key Organic Aerosol Traits Associated with Cellular Reactive Oxygen Species Production in the Southeastern United States

Exposure to ambient fine particulate matter (PM2.5) is associated with millions of premature deaths annually. Oxidative stress through overproduction of reactive oxygen species (ROS) is a possible mechanism for PM2.5-induced health effects. Organic aerosol (OA) is a dominant component of PM2.5 worldwide, yet its role in PM2.5 toxicity is poorly understood due to its chemical complexity. Here, through integrated cellular ROS measurements and detailed multi-instrument chemical characterization of PM in urban southeastern United States, we show that oxygenated OA (OOA), especially more-oxidized OOA, is the main OA type associated with cellular ROS production. We further reveal that highly unsaturated species containing carbon-oxygen double bonds and aromatic rings in OOA are major contributors to cellular ROS production. These results highlight the key chemical features of ambient OA driving its toxicity. As more-oxidized OOA is ubiquitous and abundant in the atmosphere, this emphasizes the need to understand its sources and chemical processing when formulating effective strategies to mitigate PM2.5 health impacts.

Iron and Copper Alter the Oxidative Potential of Secondary Organic Aerosol: Insights from Online Measurements and Model Development

The oxidative potential (OP) of particulate matter has been widely suggested as a key metric for describing atmospheric particle toxicity. Secondary organic aerosol (SOA) and redox-active transition metals, such as iron and copper, are key drivers of particle OP. However, their relative contributions to OP, as well as the influence of metal-organic interactions and particulate chemistry on OP, remains uncertain. In this work, we simultaneously deploy two novel online instruments for the first time, providing robust quantification of particle OP. We utilize online AA (OPAA) and 2,7-dichlorofluoroscein (ROSDCFH) methods to investigate the influence of Fe(II) and Cu(II) on the OP of secondary organic aerosol (SOA). In addition, we quantify the OH production (OPOH) from these particle mixtures. We observe a range of synergistic and antagonistic interactions when Fe(II) and Cu(II) are mixed with representative biogenic (β-pinene) and anthropogenic (naphthalene) SOA. A newly developed kinetic model revealed key reactions among SOA components, transition metals, and ascorbate, influencing OPAA. Model predictions agree well with OPAA measurements, highlighting metal-ascorbate and -naphthoquinone-ascorbate reactions as important drivers of OPAA. The simultaneous application of multiple OP assays and a kinetic model provides new insights into the influence of metal and SOA interactions on particle OP.

Design, optimization, and evaluation of a wet electrostatic precipitator (ESP) for aerosol collection

In this study, we developed, optimized, and evaluated in lab and field experiments a wet electrostatic precipitator (ESP) for the collection of ambient PM_2.5 (particulate matter with aerodynamic diameter < 2.5 μm) into ultrapure water by applying an electrostatic charge to the particles. We operated the wet ESP at different flow rates and voltages to identify the optimal operating conditions. According to our experimental measurements, a flow rate of 125 lpm and an applied positive voltage of 11 kV resulted in a lower ozone generation of 133 ppb and a particle collection efficiency exceeding 80-90% in all size ranges. For the field tests, the wet ESP was compared with the versatile aerosol concentration enrichment system (VACES) connected to a BioSampler, a PTFE filter sampler, and an OC/EC analyzer (Sunset Laboratory Inc., USA) as a reference. The chemical analysis results indicated the wet ESP concentrations of metal and trace elements were in very good agreement with those measured by the VACES/BioSampler and PTFE filter sampler. Moreover, our results showed comparable total organic carbon (TOC) concentrations measured by the wet ESP, BioSampler, and OC/EC analyzer, while somewhat lower TOC concentrations were measured by the PTFE filter sampler, possibly due to the limitations of extracting water-insoluble organic carbon (WIOC) from a dry substrate in the latter sampler. The comparable TOC content in the wet ESP and BioSampler samples differs from previous findings that showed higher TOC content in BioSampler samples compared to those collected by dry ESP. The results of the Dithiothreitol (DTT) assay showed comparable DTT activity in the VACES/BioSampler and wet ESP PM samples while slightly lower in the PTFE filter samples. Overall, our results suggest that the wet ESP could be a promising alternative to other conventional sampling methods.

Oxidative stress indices induced by industrial and urban PM2.5-bound metals in A549 cells

The detrimental effects of atmospheric fine particulate matter (PM_2.5) on human health are of major global concern. PM_2.5-bound metals are toxic compounds that contribute to cellular damage. To investigate the toxic effects of water-soluble metals on human lung epithelial cells and their bioaccessibility to lung fluid, PM_2.5 samples were collected from both urban and industrial areas in the metropolitan city of Tabriz, Iran. Oxidative stress indices, including proline content, total antioxidant capacity (TAC), cytotoxicity, and DNA damage levels of water-soluble components of PM_2.5, were evaluated. Furthermore, an in vitro test was conducted to assess the bioaccessibility of various PM_2.5-bound metals to the respiratory system using simulated lung fluid. PM_2.5 average concentrations in urban and industrial areas were 83.11 and 97.71 μg/m³, respectively. The cytotoxicity effects of PM_2.5 water-soluble constituents from urban areas were significantly higher than in industrial areas and the IC₅₀ was found to be 96.76 ± 3.34 and 201.31 ± 5.96 μg/mL for urban and industrial PM_2.5 samples, respectively. In addition, higher PM_2.5 concentrations increased the proline content in a concentration-dependent manner in A549 cells, which plays a protective role against oxidative stress and prevents PM_2.5-induced DNA damage. Also, the partial least squares regression revealed that Be, Cd, Co, Ni, and Cr, were significantly correlated with DNA damage and proline accumulation, which caused cell damage through oxidative stress. The results of this study showed that PM_2.5-bound metals in highly polluted metropolitan city caused substantial changes in the cellular proline content, DNA damage levels and cytotoxicity in human lung A549 cells.

Microfluidic paper-based analytical devices for simultaneous detection of oxidative potential and copper in aerosol samples

The potential reach of point-of-care (POC) diagnostics into daily routines for exposure to reactive oxygen species (ROS) and Cu in aerosolized particulate matter (PM) demands that microfluidic paper-based analytical devices (μPADs) take into consideration the simple detection of these toxic PM components. Here, we propose μPADs with a dual-detection system for simultaneous ROS and Cu(II) detection. For colorimetric ROS detection, the glutathione (GSH) assay with a folding design to delay the reaction yielded complete ROS and GSH oxidation, and improved homogeneity of color development relative to using the lateral flow pattern. For electrochemical Cu(II) determination, 1,10-phenanthroline/Nafion modified graphene screen-printed electrodes showed ability to detect Cu(II) down to pg level being low enough to be applied to PM analysis. No intra- and inter-interference affecting both systems were found. The proposed μPADs obtained LODs for 1,4-naphthoquinone (1,4-NQ), used as the ROS representative, and Cu(II) of 8.3 ng and 3.6 pg, respectively and linear working ranges of 20 to 500 ng for ROS and 1 × 10^-2 to 2 × 10² ng for Cu(II). Recovery of the method was between 81.4 and 108.3% for ROS and 80.5-105.3% for Cu(II). Finally, the sensors were utilized for simultaneous ROS and Cu(II) determination in PM samples and the results statistically agreed with those using the conventional methods at 95% confidence.

Measurement artifacts in the dithiothreitol (DTT) oxidative potential assay caused by interactions between aqueous metals and phosphate buffer

Metals in particulate matter (PM) are hypothesized to have enhanced toxicity based on their ability to catalyze reactive oxygen species (ROS) formation. Acellular assays are used to measure the oxidative potential (OP) of PM and its individual components. Many OP assays, including the dithiothreitol (DTT) assay, use a phosphate buffer matrix to simulate biological conditions (pH 7.4 and 37 °C). Prior work from our group observed transition metal precipitation in the DTT assay, consistent with thermodynamic equilibria. In this study, we characterized the effects of metal precipitation on OP measured by the DTT assay. Metal precipitation was affected by aqueous metal concentrations, ionic strength, and phosphate concentrations in ambient PM sampled in Baltimore, MD and a standard PM sample (NIST SRM-1648a, Urban Particulate Matter). Critically, differences in metal precipitation induced differing OP responses of the DTT assay as a function of phosphate concentration in all PM samples analyzed. These results indicate that comparison of DTT assay results obtained at differing phosphate buffer concentrations is highly problematic. Further, these results have implications for other chemical and biological assays that use phosphate buffer for pH control and their use to infer PM toxicity.

Assessing oxidative stress induction ability and oxidative potential of PM2.5 in cities in eastern and western Japan

Oxidative stress is an important cause of respiratory diseases associated with exposure to PM_2.5. Accordingly, acellular methods for assessing the oxidative potential (OP) of PM_2.5 have been evaluated extensively for use as indicators of oxidative stress in living organisms. However, OP-based assessments only reflect the physicochemical properties of particles and do not consider particle-cell interactions. Therefore, to determine the potency of OP under various PM_2.5 scenarios, oxidative stress induction ability (OSIA) assessments were performed using a cell-based method, the heme oxygenase-1 (HO-1) assay, and the findings were compared with OP measurements obtained using an acellular method, the dithiothreitol assay. For these assays, PM_2.5 filter samples were collected in two cities in Japan. To quantitatively determine the relative contribution of the quantity of metals and subtypes of organic aerosols (OA) in PM_2.5 to the OSIA and the OP, online measurements and offline chemical analysis were also performed. The findings showed a positive relationship between the OSIA and OP for water-extracted samples, confirming that the OP is generally well suited for use as an indicator of the OSIA. However, the correspondence between the two assays differed for samples with a high water-soluble (WS)-Pb content, which had a higher OSIA than would be expected from the OP of other samples. The results of reagent-solution experiments showed that the WS-Pb induced the OSIA, but not the OP, in 15-min reactions, suggesting a reason for the inconsistent relationship between the two assays across samples. Multiple linear regression analyses and reagent-solution experiments showed that WS transition metals and biomass burning OA accounted for approximately 30-40% and 50% of the total OSIA or the total OP of water-extracted PM_2.5 samples, respectively. This is the first study to evaluate the association between cellular oxidative stress assessed by the HO-1 assay and the different subtypes of OA.

Toxicological Effects of Secondary Air Pollutants

Secondary air pollutants, originating from gaseous pollutants and primary particulate matter emitted by natural sources and human activities, undergo complex atmospheric chemical reactions and multiphase processes. Secondary gaseous pollutants represented by ozone and secondary particulate matter, including sulfates, nitrates, ammonium salts, and secondary organic aerosols, are formed in the atmosphere, affecting air quality and human health. This paper summarizes the formation pathways and mechanisms of important atmospheric secondary pollutants. Meanwhile, different secondary pollutants' toxicological effects and corresponding health risks are evaluated. Studies have shown that secondary pollutants are generally more toxic than primary ones. However, due to their diverse source and complex generation mechanism, the study of the toxicological effects of secondary pollutants is still in its early stages. Therefore, this paper first introduces the formation mechanism of secondary gaseous pollutants and focuses mainly on ozone's toxicological effects. In terms of particulate matter, secondary inorganic and organic particulate matters are summarized separately, then the contribution and toxicological effects of secondary components formed from primary carbonaceous aerosols are discussed. Finally, secondary pollutants generated in the indoor environment are briefly introduced. Overall, a comprehensive review of secondary air pollutants may shed light on the future toxicological and health effects research of secondary air pollutants.

Toxicological Profile of PM from Different Sources in the Bronchial Epithelial Cell Line BEAS-2B

The toxicity of particulate matter (PM) is strictly associated with its physical-chemical characteristics, such as size or chemical composition. While these properties depend on the origin of the particles, the study of the toxicological profile of PM from single sources has rarely been highlighted. Hence, the focus of this research was to investigate the biological effects of PM from five relevant sources of atmospheric PM: diesel exhaust particles, coke dust, pellet ashes, incinerator ashes, and brake dust. Cytotoxicity, genotoxicity, oxidative, and inflammatory response were assessed in a bronchial cell line (BEAS-2B). BEAS-2B cells were exposed to different concentrations (25, 50, 100, and 150 μg/mL medium) of particles suspended in water. The exposure lasted 24 h for all the assays performed, except for reactive oxygen species, which were evaluated after 30 min, 1 h, and 4 h of treatment. The results showed a different action of the five types of PM. All the tested samples showed a genotoxic action on BEAS-2B, even in the absence of oxidative stress induction. Pellet ashes seemed to be the only ones able to induce oxidative stress by boosting the formation of reactive oxygen species, while brake dust resulted in the most cytotoxic. In conclusion, the study elucidated the differential response of bronchial cells to PM samples generated by different sources. The comparison could be a starting point for a regulatory intervention since it highlighted the toxic potential of each type of PM tested.

Fast Hydroxyl Radical Generation at the Air-Water Interface of Aerosols Mediated by Water-Soluble PM2.5 under Ultraviolet A Radiation

Due to the adverse health effects and the role in the formation of secondary organic aerosols, hydroxyl radical (OH) generation by atmospheric fine particulate matter (PM) has been of particular research interest in both bulk solutions and the gas phase. However, OH generation by PM at the air-water interface of atmospheric water droplets, a unique environment where reactions can be accelerated by orders of magnitude, has long been overlooked. Using the field-induced droplet ionization mass spectrometry methodology that selectively samples molecules at the air-water interface, here, we show significant oxidation of amphiphilic lipids and isoprene mediated by water-soluble PM_2.5 at the air-water interface under ultraviolet A irradiation, with the OH generation rate estimated to be 1.5 × 10¹⁶ molecule·s^-1·m^-2. Atomistic molecular dynamics simulations support the counter-intuitive affinity for the air-water interface of isoprene. We opine that it is the carboxylic chelators of the surface-active molecules in PM that enrich photocatalytic metals such as iron at the air-water interface and greatly enhance the OH generation therein. This work provides a potential new heterogeneous OH generation channel in the atmosphere.

Pollution source and chemicals structure of the water-soluble fractions in PM2.5 that induce apoptosis in China

Identify risk drivers is the key condition in air pollution control, and biological effect-directed analysis is the most commented method for combing chemical identify and human health. The water-soluble organic matter contained in PM_2.5 plays an important role in human health, while it is also the most difficult to identify its chemical information. Exploring the structural characteristics and pollution sources of its key toxic components is the optimized strategy to meet this question. In this study, the induction of apoptosis by the water-soluble fractions (WSF) of PM_2.5 samples collected in 10 major cities in China over a period of 1 year was observed in vitro in Beas-2b cells. Organic carbon structures were examined using nuclear magnetic resonance; air potential sources were identified using δ¹³C and ¹⁴C isotopic markers. Apoptosis induction by WSF in PM_2.5 was generally stronger in northern cities than in southern cities, and in winter than in summer. Organic compounds with aromatic and double-bond carbon structures from secondary products of motor vehicle exhausts, coal-derived emissions, and emissions derived from the burning of core residues may be primarily responsible for apoptosis induction by PM_2.5. Our results will contribute to understanding the toxic substances contained in WSF and provide basic data for accurate pollution control.

Seasonal variation of driving factors of ambient PM2.5 oxidative potential in Shenzhen, China

Reactive oxygen species (ROS) play a central role in health effects of ambient fine particulate matter (PM_2.5). In this work, we screened for efficient and complementary oxidative potential (OP) measurements by comparing the response values of multiple chemical probes (OP^DTT, OP^OH, OP^GSH) to ambient PM_2.5 in Shenzhen, China. Combined with meteorological condition and PM_2.5 chemical composition analysis, we explored the effects of different chemical components and emission sources on the ambient PM_2.5 OP and analyzed their seasonal variations. The results show that OP_m^DTT(mass-normalized) and OP_m^GSH-SLF were highly correlated (r = 0.77). OP^DTT was mainly influenced by organic carbon, while OP^OH was highly dominated by heavy metals. The combination of OP^DTT and OP^OH provides an efficient and comprehensive measurement of OP. Temporally, the OPs were substantially higher in winter than in summer (1.4 and 4 times higher for OP_m^DTT and OP_m^OH, respectively). The long-distance transported biomass burning sources from the north dominated the OP^DTT in winter, while the ship emissions mainly influenced the summer OP. The OP_m^DTT increased sharply with the decrease of PM_2.5 mass concentration, especially when the PM_2.5 concentration was lower than 30 μg/m³. The huge differences in wind fields between the winter and summer cause considerable variations in PM_2.5 concentrations, components, and OP. Our work emphasizes the necessity of long-term, multi-method, multi-component assessment of the OP of PM_2.5.

The oxidative potential of airborne particulate matter in two urban areas of Chile: More than meets the eye

Oxidative potential (OP) has gained attention as a parameter that can reveal the ability of different properties of particulate matter (PM) to generate reactive oxygen species (ROS) as one single value. Moreover, OP is also believed to be a predictor of toxicity and hence the health effects of PM. This study evaluated the OP of PM₁₀, PM_2.5,and PM_1.0samples using dithiothreitol assays in two cities of Chile (Santiago and Chillán). The results showed that the OP was different between cities, PM size fractions, and seasons. Additionally, OP was strongly correlated with certain metals and meteorological variables. Higher mass-normalized OP was observed during cold periods in Chillán and warm periods in Santiago and was associated with PM_2.5 and PM₁. On the other hand, volume-normalized OP was higher during winter in both cities and for PM₁₀. Additionally, we compared the OP values to the Air Quality Index (AQI) scale and found cases of days that were classified as having "good" air quality (supposed to be less harmful to health) showing extremely high OP values that were similar to those on days that were classified as "unhealthy". Based on these results,we suggest using the OP as a complementary measure to the PM mass concentration because it includes important new information related to PM properties and compositions that could help improvecurrent air quality management tools.

Chemical Characteristics and Cytotoxicity to GC-2spd(ts) Cells of PM2.5 in Nanjing Jiangbei New Area from 2015 to 2019

PM_2.5 is an air pollutant with complex components. After entering the body through respiration, PM_2.5 can not only cause respiratory diseases, but also break through the blood-testis barrier and influence the reproductive system. PM_2.5 with different components may result in different toxic effects. In the first five years of Nanjing Jiangbei New Area, industrial transformation would change the concentration and chemical fraction of PM_2.5 in the local environment to a certain extent. In this study, PM_2.5 collected in Nanjing Jiangbei New Area every autumn and winter from 2015 to 2019 was analyzed. PM_2.5 concentration generally decreased year by year. The large proportion of secondary inorganic ions indicated the presence of secondary pollution at the sampling site. PM_2.5 was mainly emitted from fossil fuel combustion and vehicle exhaust. The cytotoxicity of PM_2.5 samples was evaluated by PM_2.5 exposure to mouse spermatocytes (GC-2spd(ts) cells). Cell viability was relatively low in 2016 and 2018, and relatively high in 2017 and 2019. Reactive oxygen species levels and DNA damage levels followed similar trends, with an overall annual decrease. The cytotoxicity of PM_2.5 on GC-2spd(ts) cells was significantly correlated with water-soluble ions, water-soluble organic carbon, heavy metals and polycyclic aromatic hydrocarbons (p < 0.01). According to principal component analysis and multiple linear regression, fossil fuel combustion, secondary transformation of pollutants and construction dust were identified as the major contributors to cytotoxic effects, contributing more than 50%.

Pollution characteristics of environmental persistent free radicals (EPFRs) and their contribution to oxidation potential in road dust in a large city in northwest China

Environmental persistent free radicals (EPFRs) are new environmental health risk substances in the atmosphere, and their oxidative toxicity (OT) has not been strongly confirmed. In this study, the fugitive characteristics of EPFRs in road dust in a metropolitan city located in northwest China, and their potential oxidative toxicity were investigated. The results showed that the road dust contains Carbon-centered EPFRs with the mean mass concentration of (6.6 ± 5.0) × 10¹⁷ spins/g. EPFRs in road dust are degradable and have a half-life of 4.5 years. The water insoluble (WIS) components contribute 71% to the oxidative toxicity of road dust and show a rapid toxicity generation process, while the oxidative toxicity generation rate of water-soluble dust is more stable. Based on the positive matrix factorization (PMF) model, the contribution of EPFRs-dominated factors to Total-OT and WIS-OT is 17.3% and 33.3%, respectively. The PMF model results indicated that different types of EPFRs contributed differently to the oxidative toxicity of road dust and Carbon-centered EPFRs are more likely to participate in reactive oxygen species generation. Our results highlight that the EPFRs are an important contributor to the oxidative toxicity of atmospheric particulate matter, and their oxidative toxicity is dependent on the types of free radicals. It also provides an important insight into the influence of other potentially toxic substances on the oxidative toxicity of atmospheric PM.

Organic Peroxides in Aerosol: Key Reactive Intermediates for Multiphase Processes in the Atmosphere

Organic peroxides (POs) are organic molecules with one or more peroxide (-O-O-) functional groups. POs are commonly regarded as chemically labile termination products from gas-phase radical chemistry and therefore serve as temporary reservoirs for oxidative radicals (HOx and ROx) in the atmosphere. Owing to their ubiquity, active gas-particle partitioning behavior, and reactivity, POs are key reactive intermediates in atmospheric multiphase processes determining the life cycle (formation, growth, and aging), climate, and health impacts of aerosol. However, there remain substantial gaps in the origin, molecular diversity, and fate of POs due to their complex nature and dynamic behavior. Here, we summarize the current understanding on atmospheric POs, with a focus on their identification and quantification, state-of-the-art analytical developments, molecular-level formation mechanisms, multiphase chemical transformation pathways, as well as environmental and health impacts. We find that interactions with SO2 and transition metal ions are generally the fast PO transformation pathways in atmospheric liquid water, with lifetimes estimated to be minutes to hours, while hydrolysis is particularly important for α-substituted hydroperoxides. Meanwhile, photolysis and thermolysis are likely minor sinks for POs. These multiphase PO transformation pathways are distinctly different from their gas-phase fates, such as photolysis and reaction with OH radicals, which highlights the need to understand the multiphase partitioning of POs. By summarizing the current advances and remaining challenges for the investigation of POs, we propose future research priorities regarding their origin, fate, and impacts in the atmosphere.

Dynamic Wood Smoke Aerosol Toxicity during Oxidative Atmospheric Aging

Wildfires are a major source of biomass burning aerosol to the atmosphere, with their incidence and intensity expected to increase in a warmer future climate. However, the toxicity evolution of biomass burning organic aerosol (BBOA) during atmospheric aging remains poorly understood. In this study, we report a unique set of chemical and toxicological metrics of BBOA from pine wood smoldering during multiphase aging by gas-phase hydroxyl radicals (OH). Both the fresh and OH-aged BBOA show activity relevant to adverse health outcomes. The results from two acellular assays (DTT and DCFH) show significant oxidative potential (OP) and reactive oxygen species (ROS) formation in OH-aged BBOA. Also, radical concentrations in the aerosol assessed by electron paramagnetic resonance (EPR) spectroscopy increased by 50% following heterogeneous aging. This enhancement was accompanied by a transition from predominantly carbon-centered radicals (85%) in the fresh aerosol to predominantly oxygen-centered radicals (76%) following aging. Both the fresh and aged biomass burning aerosols trigger prominent antioxidant defense during the in vitro exposure, indicating the induction of oxidative stress by BBOA in the atmosphere. By connecting chemical composition and toxicity using an integrated approach, we show that short-term aging initiated by OH radicals can produce biomass burning particles with a higher particle-bound ROS generation capacity, which are therefore a more relevant exposure hazard for residents in large population centers close to wildfire regions than previously studied fresh biomass burning emissions.

Prenatal exposure to tailpipe and non-tailpipe tracers of particulate matter pollution and autism spectrum disorders

BACKGROUND

Traffic-related air pollution exposure is associated with increased risk of autism spectrum disorder (ASD). It is unknown whether carbonaceous material from vehicular tailpipe emissions or redox-active non-tailpipe metals, eg. from tire and brake wear, are responsible. We assessed ASD associations with fine particulate matter (PM_2.5) tracers of tailpipe (elemental carbon [EC] and organic carbon [OC]) and non-tailpipe (copper [Cu]; iron [Fe] and manganese [Mn]) sources during pregnancy in a large cohort.

METHODS

This retrospective cohort study included 318,750 children born in Kaiser Permanente Southern California (KPSC) hospitals during 2001-2014, followed until age 5. ASD cases were identified by ICD codes. Monthly estimates of PM_2.5 and PM_2.5 constituents EC, OC, Cu, Fe, and Mn with 4 km spatial resolution were obtained from a source-oriented chemical transport model. These exposures and NO₂ were assigned to each maternal address during pregnancy, and associations with ASD were assessed using Cox regression models adjusted for covariates. PM constituent effect estimates were adjusted for PM_2.5 and NO₂ to assess independent effects. To distinguish ASD risk associated with non-tailpipe from tailpipe sources, the associations with Cu, Fe, and Mn were adjusted for EC and OC, and vice versa.

RESULTS

There were 4559 children diagnosed with ASD. In single-pollutant models, increased ASD risk was associated with gestational exposures to tracers of both tailpipe and non-tailpipe emissions. The ASD hazard ratios (HRs) per inter-quartile increment of exposure) for EC, OC, Cu, Fe, and Mn were 1.11 (95% CI: 1.06-1.16), 1.09 (95% CI: 1.04-1.15), 1.09 (95% CI: 1.04-1.13), 1.14 (95% CI: 1.09-1.20), and 1.17 (95% CI: 1.12-1.22), respectively. Estimated effects of Cu, Fe, and Mn (reflecting non-tailpipe sources) were largely unchanged in two-pollutant models adjusting for PM_2.5, NO₂, EC or OC. In contrast, ASD associations with EC and OC were markedly attenuated by adjustment for non-tailpipe sources.

CONCLUSION

Results suggest that non-tailpipe emissions may contribute to ASD. Implications are that reducing tailpipe emissions, especially from vehicles with internal combustion engines, may not eliminate ASD associations with traffic-related air pollution.

Ultrafine Particles Issued from Gasoline-Fuels and Biofuel Surrogates Combustion: A Comparative Study of the Physicochemical and In Vitro Toxicological Effects

Gasoline emissions contain high levels of pollutants, including particulate matter (PM), which are associated with several health outcomes. Moreover, due to the depletion of fossil fuels, biofuels represent an attractive alternative, particularly second-generation biofuels (B2G) derived from lignocellulosic biomass. Unfortunately, compared to the abundant literature on diesel and gasoline emissions, relatively few studies are devoted to alternative fuels and their health effects. This study aimed to compare the adverse effects of gasoline and B2G emissions on human bronchial epithelial cells. We characterized the emissions generated by propane combustion (CAST1), gasoline Surrogate, and B2G consisting of Surrogate blended with anisole (10%) (S+10A) or ethanol (10%) (S+10E). To study the cellular effects, BEAS-2B cells were cultured at air-liquid interface for seven days and exposed to different emissions. Cell viability, oxidative stress, inflammation, and xenobiotic metabolism were measured. mRNA expression analysis was significantly modified by the Surrogate S+10A and S+10E emissions, especially CYP1A1 and CYP1B1. Inflammation markers, IL-6 and IL-8, were mainly downregulated doubtless due to the PAHs content on PM. Overall, these results demonstrated that ultrafine particles generated from biofuels Surrogates had a toxic effect at least similar to that observed with a gasoline substitute (Surrogate), involving probably different toxicity pathways.

Air Pollution and Pediatric Respiratory Hospitalizations: Effect Modification by Particle Constituents and Oxidative Potential

Rationale: Outdoor particulate and gaseous air pollutants impair respiratory health in children, and these associations may be influenced by particle composition. Objectives: To examine whether associations between short-term variations in fine particulate air pollution, oxidant gases, and respiratory hospitalizations in children are modified by particle constituents (metals and sulfur) or oxidative potential. Methods: We conducted a case-crossover study of 10,500 children (0-17 years of age) across Canada. Daily fine particle mass concentrations and oxidant gases (nitrogen dioxide and ozone) were collected from ground monitors. Monthly estimates of fine particle constituents (metals and sulfur) and oxidative potential were also measured. Conditional logistic regression models were used to estimate associations between air pollutants and respiratory hospitalizations, above and below median values for particle constituents and oxidative potential. Measurements and Main Results: Lag-1 fine particulate matter mass concentrations were not associated with respiratory hospitalizations (odds ratio and 95% confidence interval per 10 μg/m³ increase in fine particulate matter: 1.004 [0.955-1.056]) in analyses ignoring particle constituents and oxidative potential. However, when models were examined above or below median metals, sulfur, and oxidative potential, positive associations were observed above the median. For example, the odds ratio and 95% confidence interval per 10 μg/m³ increase in fine particulate matter were 1.084 (1.007-1.167) when copper was above the median and 0.970 (0.929-1.014) when copper was below the median. Similar trends were observed for oxidant gases. Conclusions: Stronger associations were observed between outdoor fine particles, oxidant gases, and respiratory hospitalizations in children when metals, sulfur, and particle oxidative potential were elevated.

Phenotypic and Metabolomic Characterization of 3D Lung Cell Cultures Exposed to Airborne Particulate Matter from Three Air Quality Network Stations in Catalonia

Air pollution constitutes an environmental problem that it is known to cause many serious adverse effects on the cardiovascular and respiratory systems. The chemical characterization of particulate matter (PM) is key for a better understanding of the associations between chemistry and toxicological effects. In this work, the chemical composition and biological effects of fifteen PM₁₀ air filter samples from three air quality stations in Catalonia with contrasting air quality backgrounds were investigated. Three-dimensional (3D) lung cancer cell cultures were exposed to these sample extracts, and cytotoxicity, reactive oxygen species (ROS) induction, metabolomics, and lipidomics were explored. The factor analysis method Multivariate Curve Resolution-Alternating Least-Squares (MCR-ALS) was employed for an integrated interpretation of the associations between chemical composition and biological effects, which could be related to urban traffic emission, biomass burning smoke, and secondary aerosols. In this pilot study, a novel strategy combining new approach methodologies and chemometrics provided new insights into the biomolecular changes in lung cells associated with different sources of air pollution. This approach can be applied in further research on air pollution toxicity to improve our understanding of the causality between chemistry and its effects.

Effect of Biomass Burning, Diwali Fireworks, and Polluted Fog Events on the Oxidative Potential of Fine Ambient Particulate Matter in Delhi, India

We investigated the influence of biomass burning (BURN), Diwali fireworks, and fog events on the ambient fine particulate matter (PM_2.5) oxidative potential (OP) during the postmonsoon (PMON) and winter season in Delhi, India. The real-time hourly averaged OP (based on a dithiothreitol assay) and PM_2.5 chemical composition were measured intermittently from October 2019 to January 2020. The peak extrinsic OP (OP_v: normalized by the volume of air) was observed during the winter fog (WFOG) (5.23 ± 4.6 nmol·min^-1·m^-3), whereas the intrinsic OP (OP_m; normalized by the PM_2.5 mass) was the highest during the Diwali firework-influenced period (29.4 ± 18.48 pmol·min^-1·μg^-1). Source apportionment analysis using positive matrix factorization revealed that traffic + resuspended dust-related emissions (39%) and secondary sulfate + oxidized organic aerosols (38%) were driving the OP_v during the PMON period, whereas BURN aerosols dominated (37%) the OP_v during the WFOG period. Firework-related emissions became a significant contributor (∼32%) to the OP_v during the Diwali period (4 day period from October 26 to 29), and its contribution peaked (72%) on the night of Diwali. Discerning the influence of seasonal and episodic sources on health-relevant properties of PM_2.5, such as OP, could help better understand the causal relationships between PM_2.5 and health effects in India.

Alveolar Type II Cell Damage and Nrf2-SOD1 Pathway Downregulation Are Involved in PM2.5-Induced Lung Injury in Rats

The general toxicity of fine particulate matter (PM_2.5) has been intensively studied, but its pulmonary toxicities are still not fully understood. To investigate the changes of lung tissue after PM_2.5 exposure and identify the potential mechanisms of pulmonary toxicity, PM_2.5 samples were firstly collected and analyzed. Next, different doses of PM_2.5 samples (5 mg/kg, 10 mg/kg, 20 mg/kg) were intratracheally instilled into rats to simulate lung inhalation of polluted air. After instillation for eight weeks, morphological alterations of the lung were examined, and the levels of oxidative stress were detected. The data indicated that the major contributors to PM_2.5 mass were organic carbon, elemental carbon, sulfate, nitrate, and ammonium. Different concentrations of PM_2.5 could trigger oxidative stress through increasing reactive oxygen species (ROS) and 8-hydroxy-2'-deoxyguanosine (8-OHdG) levels, and decreasing expression of antioxidant-related proteins (nuclear factor erythroid 2-related factor 2 (Nrf2), superoxide dismutase 1 (SOD1) and catalase). Histochemical staining and transmission electron microscopy displayed pulmonary inflammation, collagen deposition, mitochondrial swelling, and a decreasing number of multilamellar bodies in alveolar type II cells after PM_2.5 exposure, which was related to PM_2.5-induced oxidative stress. These results provide a basis for a better understanding of pulmonary impairment in response to PM_2.5.

Oxidation potential and coupling effects of the fractionated components in airborne fine particulate matter

Fine particulate matter (PM_2.5) can induce the generation of reactive oxygen species (ROS) and damage human tissues. Fully understanding the generation mechanism of oxidative toxicity of PM is challenging due to the extremely complex composition. Classification methods may be helpful in understanding the ROS production mechanisms of complex PM. This study used a solvent extraction and solid phase extraction methods to separate five different components from PM_2.5 includes non-extractable components that have rarely been studied before, and discussed the coupling effect and heterogeneous characteristics of oxidation activity they produced. It is found that the water-soluble component contribute about half of the PM oxidation activity, and metal ions probably contribute most of the oxidation activity. Experimental results show that oxygen molecules is the main precursor of ROS production, which depends on whether the aerosol component has catalytic conversion ability. After mixing humic-like substance (HULIS) and hydrophilic water-soluble (HP-WSM) PM, the oxidation activity increased, it is most likely to be a synergistic effect between HULIS and metal ions is dominant, but limited contribution to oxidation activity. It turns out that the non-extractable and water-insoluble components have higher oxidation activity than the water-soluble components, and the two components exhibited a more durable ability to produce ¹O₂. The reaction of soluble components to produce ROS is homogeneous, but it is obviously heterogeneous for these insoluble components. This study suggests that future attention should be paid to the oxidative toxicity of the non-extractable component, and that single PM component or compound cannot simply be studied independently.

Inter-annual variability of source contributions to PM10, PM2.5, and oxidative potential in an urban background site in the central mediterranean

Airborne particulate matter (PM) is studied because of its effects on human health and climate change. PM long-term characterisation allows identifying trends and evaluating the outcomes of environmental protection policies. This work is aimed to study the inter-annual variability of PM_2.5 and PM₁₀ concentrations and chemical composition in an urban background site (Italy). A dataset of daily PM_2.5 and PM₁₀ was collected in the period 2016-2017, including the content of OC, EC, major water-soluble ions, main metals, and compared to a similar dataset collected in the period 2013-2014. Oxidative potential using DTT assay (dithiothreitol) was evaluated and expressed in DTT_V as 0.39 nmol/min·m³ in PM₁₀ and 0.29 in PM_2.5 nmol/min·m³. PM source apportionment was computed using the EPA PMF5.0 model and source contributions compared with those of a previous dataset collected between 2013 and 2014. Multi linear regression analysis identified which source contributed (p < 0.05) to the oxidative potential of each size fraction. Inter-annual trends were more evident on PM_2.5 with reductions of biomass burning contribution and increases in traffic contribution in the 2016-2017 period. Crustal contributions were similar for the two periods, in both size fractions. Carbonates were comparable in PM₁₀ with a slight increase in PM_2.5. Sea spray decreased in PM₁₀. The DTT_V of PM_2.5 peaked during cold periods, while, the DTT_V of the PM_10-2.5 fraction peaked in summer, suggesting that different sources, with different seasonality, influence OP in the PM_2.5 and PM_10-2.5 fractions. Analysis showed that sea spray, crustal, and carbonates sources contribute ∼13.6% to DTT_V in PM_2.5 and ∼62.4% to DTT_V in PM_10-2.5. Combustion sources (biomass burning and traffic) contribute to the majority of DTT_V (50.6%) in PM_2.5 and contribute for ∼26% to DTT_V in PM_10-2.5. Secondary nitrate contributes to DTT_V in both fine and coarse fraction; secondary sulphate contribute to DTT_V in PM_2.5 with negligible contributions to DTT_V in PM_10-2.5.

Chemical characteristics and oxidative potential of indoor and outdoor PM2.5 in densely populated urban slums

A significant proportion of population in metropolitan cities in India live in slums which are highly dense and crowded informal housing settlements with poor environmental conditions including high exposure to air pollution. Recent studies report that toxicity is induced by oxidative processes, mediated by the water-soluble PM chemical components leading to reactive oxygen species production thereby causing inflammatory disorders. Hence, for the first time, this study assessed the chemical characteristics and oxidative potential (OP) of indoor and outdoor PM_2.5 in two slums in Mumbai, India. Daily gravimetric PM_2.5 was measured in ∼40 homes each in a low- and a high-traffic slum and analysed for 18 water-soluble elements and organic carbon (WSOC). Subsequently, OP was assessed through the Dithiothreitol (DTT) assay. Average WSOC was similar in indoor and outdoor environments while the water-soluble concentrations of total elements ranged 4.5-6.5 μg/m³ indoors and 6.4-19.2 μg/m³ outdoors, with S, Ca, K, Na and Zn being the most abundant elements. Spatial distributions of indoor concentrations were influenced by outdoor sources such as local traffic emissions for Cd, Fe, Al and Zn. The influence of outdoor-origin particles was enhanced in homes reporting high air exchange rates. OP was higher outdoors than indoors in both low-traffic slum (0.04-0.51 nmol min^-1m^-3 outdoors and 0.02-0.38 nmol min^-1m^-3 indoors) and high-traffic slum (0.03-1.06 nmol min^-1m^-3 outdoors and 0.04-0.77 nmol min^-1m^-3 indoors). Outdoor and indoor OP was also more influenced by outdoor road dust showing significant correlation with tracer elements Cu and Al (r ≥ 0.45; p < 0.05). Similar to OP, the non-carcinogenic health risk associated with indoor PM_2.5 were also higher in high-traffic slum (Hazard Index, HI = 1.60) than in low-traffic slum (HI = 0.43). Overall, this study shows that the indoor PM_2.5 and its chemical constituents in Mumbai slums are primarily of outdoor origin with higher toxicity and non-carcinogenic health risk in high-traffic slums.

Exposure to naphthalene and β-pinene-derived secondary organic aerosol induced divergent changes in transcript levels of BEAS-2B cells

The health effects of exposure to secondary organic aerosols (SOAs) are still limited. Here, we investigated and compared the toxicities of soot particles (SP) coated with β-pinene SOA (SOAβPin-SP) and SP coated with naphthalene SOA (SOANap-SP) in a human bronchial epithelial cell line (BEAS-2B) residing at the air-liquid interface. SOAβPin-SP mostly contained oxygenated aliphatic compounds from β-pinene photooxidation, whereas SOANap-SP contained a significant fraction of oxygenated aromatic products under similar conditions. Following exposure, genome-wide transcriptome responses showed an Nrf2 oxidative stress response, particularly for SOANap-SP. Other signaling pathways, such as redox signaling, inflammatory signaling, and the involvement of matrix metalloproteinase, were identified to have a stronger impact following exposure to SOANap-SP. SOANap-SP also induced a stronger genotoxicity response than that of SOAβPin-SP. This study elucidated the mechanisms that govern SOA toxicity and showed that, compared to SOAs derived from a typical biogenic precursor, SOAs from a typical anthropogenic precursor have higher toxicological potency, which was accompanied with the activation of varied cellular mechanisms, such as aryl hydrocarbon receptor. This can be attributed to the difference in chemical composition; specifically, the aromatic compounds in the naphthalene-derived SOA had higher cytotoxic potential than that of the β-pinene-derived SOA.

Oxidative potential associated with water-soluble components of PM2.5 in Beijing: The important role of anthropogenic organic aerosols

Oxidative stress is the mainstream toxicological mechanism for the adverse health outcomes of ambient aerosols. However, our understanding of the crucial redox-active species affecting the oxidative potential of water-soluble aerosols (OP_WS) remains limited. In this study, the OP_WS of PM_2.5 in Beijing was measured using dithiothreitol (DTT) assay, including DTT consumption rate and ·OH formation rate. OP_WS was more closely related to water-soluble organic compounds (WSOC) rather than transition metals. Laboratory simulations were conducted to investigate the effects of individual target species in the context of complex metal-organic interactions. The results showed that reducing WSOC can effectively decrease OP_WS, while reducing Cu²⁺ increased OP_WS. Parallel factor analysis demonstrated that OP_WS was the most significantly correlated with the highly oxidized humic-like or quinone-like substances. Multiple linear regression showed that aromatic secondary organic carbon (SOC) (34.4%), other primary combustion sources of WSOC (20.0%), primary biomass burning WSOC (19.8%), transition metal ions (12.9%) and biomass burning SOC (12.8%) made significant contributions to DTT_V. In addition to the anthropogenic sources of WSOC, the aged biogenic SOC also contributed to OH_V, particularly in summer. Reducing anthropogenic WSOC was the key to the effective control of OP_WS of PM_2.5 in Beijing.

A protective role of autophagy in fine airborne particulate matter-induced apoptosis in LN-229 cells

Air pollution is a public health threat and global epidemiological studies have shown that ambient air pollutants are closely related to various poor health conditions, including neurodegenerative diseases. Here, we evaluated the toxic effects and the underlying mechanisms of fine airborne particulate matter (PM2.5) on human glioblastoma LN-229 cells. Our results showed that exposure of LN-229 cells to PM2.5 (≥ 200 μg/mL) significantly reduced cell viability. PM2.5 exposure increased autophagy, apoptosis, and ROS production in the cells. Pre-treatment with a ROS scavenger, catalase, or depletion of mtDNA (ρ0 cells) abolished PM2.5-induced autophagy and apoptosis. PM2.5 exposure also activated MAPK signals in cells, which were blocked by catalase pre-treatment or mtDNA depletion. Furthermore, inhibition of JNK, but not ERK1/2 or p38, attenuated PM2.5-induced autophagy and apoptosis in cells. Finally, suppression of autophagy with Bafilomycin A1 or Beclin 1 siRNA exacerbated PM2.5-induced apoptosis, indicating a protective role of autophagy against PM2.5-induced apoptosis. Our results demonstrated that exposure of LN-229 cells to PM2.5 caused autophagy and apoptosis through PM2.5-induced ROS generation, mainly by mitochondria, and JNK activation. Autophagy may have a transient protective response in PM2.5-induced apoptosis. These findings have important implications for understanding the potential neurotoxicity of PM2.5.

Oxidative potential and in vitro toxicity of particles generated by pyrotechnic smokes in human small airway epithelial cells

Pyrotechnic smokes are widely used in civilian and military applications. The major issue arise from the release of particles after smoke combustion but the health risks related to their exposure are poorly documented whereas toxicity of airborne particles on the respiratory target are very well known. Therefore, this study aimed to explore the in vitro toxicity of the particle fraction of different pyrotechnic smokes. Particles from a red signalling smoke (RSS), an hexachloroethane-based obscuring smoke (HC-OS) and an anti-intrusion smoke (AIS) were collected from the cloud. RSS particles displayed the highest organic fraction (quinones and polycyclic aromatic hydrocarbons) of the three samples characterized. AIS particles contained K and cholesterol derivatives. HC-OS particles were mainly metallic with very high concentrations of Al, Fe and Ca. Intrinsic oxidative potential of smoke particles was measured with two assays. Depletions of DTT by RSS particles was greater than depletion obtained with AIS and HC-OS particles but depletion of acid ascorbic (AA) was only observed with HC-OS particles. In vitro toxicity was assessed by exposing human small airway epithelial cells (SAEC) to various concentrations of particles. After 24 h of exposure, cell viability was not affected but significant modifications of mRNA expression of antioxidant (SOD-1 and -2, catalase, HO-1, NQO-1) and inflammatory markers (IL-6, IL-8, TNF-α) were observed and were dependent on smoke type. Particles rich in metal, such as HC-OS, induced a greatest depletion of AA and a greatest inflammatory response, whereas particles rich in organic compounds, such as RSS, induced a greatest DTT depletion and a greatest antioxidant response. In conclusion, the three smoke particles have an intrinsic oxidative potential and triggered a cell adaptive response. Our study improved the knowledge of particle toxicity of pyrotechnic smokes and scientific approach developed here could be used to study other type of particles.

The effect of size distribution of ambient air particulate matter on oxidative potential by acellular method Dithiothreitol; a systematic review

Today air pollution caused by particulate matter (PM) is a global issue, especially in densely populated and high-traffic cities. The formation of reactive oxygen species (ROS) by various toxicological studies is considered as one of the important effects caused by airborne particles that can lead to adverse effects on human health. In this study, to answer the question of whether particle size affects oxidative potential (OP), we searched the main databases, including PubMed, Scopus, Embase, and Web of Science, and defined search strategy based on the MESH terms for the above-mentioned search engines. All articles published until 2021 were searched. An ANOVA was run using R software to show the correlation between the size distributions of particulate matter and oxidative potential (base on mass and volumetric units) in ambient air. As expected, the regression results showed that the relationship between particle size and OP values for the studies based on mass-logarithm has a significant difference in the different distribution size categories, which was related to the difference between the <2.5 and < 1 categories. However, ANOVA analysis did not show a significant difference in the volumetric OP logarithm in the different distribution size categories. In this study, it was found that sizes higher than 2.5 μm did not have much effect on human health, and it is recommended that future research focus on PM2.5.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s40201-021-00768-w.

Precipitation of aqueous transition metals in particulate matter during the dithiothreitol (DTT) oxidative potential assay

Transition metals in particulate matter (PM) are hypothesized to have enhanced toxicity based on their oxidative potential (OP). The acellular dithiothreitol (DTT) assay is widely used to measure the OP of PM and its chemical components. In our prior study, we showed that the DTT assay (pH 7.4, 0.1 M phosphate buffer, 37 °C) provides favorable thermodynamic conditions for precipitation of multiple metals present in PM. This study utilizes multiple techniques to characterize the precipitation of aqueous metals present at low concentrations in the DTT assay. Metal precipitation was identified using laser particle light scattering analysis, direct chemical measurement of aqueous metal removal, and microscopic imaging. Experiments were run with aqueous metals from individual metal salts and a well-characterized urban PM standard (NIST SRM-1648a, Urban Particulate Matter). Our results demonstrated rapid precipitation of metals in the DTT assay. Metal precipitation was independent of DTT but dependent on metal concentration. Metal removal in the chemically complex urban PM samples exceeded the thermodynamic predictions and removal seen in single metal salt experiments, suggesting co-precipitation and/or adsorption may have occurred. These results have broad implications for other acellular assays that study PM metals using phosphate buffer, and subsequently, the PM toxicity inferred from these assays.

Adverse outcome pathway of fine particulate matter leading to increased cardiovascular morbidity and mortality: An integrated perspective from toxicology and epidemiology

Fine particulate matter (PM_2.5) exposure is a major threat to public health, and is listed as one of the leading factors associated with global premature mortality. Among the adverse health effects on multiple organs or tissues, the influence of PM_2.5 exposure on cardiovascular system has drawn more and more attention. Although numerous studies have investigated the mechanisms responsible for the cardiovascular toxicity of PM_2.5, the various mechanisms have not been integrated due to the variety of the study models, different levels of toxicity assessment endpoints, etc. Adverse Outcome Pathway (AOP) framework is a useful tool to achieve this goal so as to facilitate comprehensive understanding of toxicity assessment of PM_2.5 on cardiovascular system. This review aims to illustrate the causal mechanistic relationships of PM_2.5-triggered cardiovascular toxicity from different levels (from molecular/cellular/organ to individual/population) by using AOP framework. Based on the AOP Wiki and published literature, we propose an AOP framework focusing on the cardiovascular toxicity induced by PM_2.5 exposure. The molecular initiating event (MIE) is identified as reactive oxygen species generation, followed by the key events (KEs) of oxidative damage and mitochondria dysfunction, which induces vascular endothelial dysfunction via vascular endothelial cell autophagy dysfunction, vascular fibrosis via vascular smooth muscle cell activation, cardiac dysregulation via myocardial apoptosis, and cardiac fibrosis via fibroblast proliferation and myofibroblast differentiation, respectively; all of the above cardiovascular injuries ultimately elevate cardiovascular morbidity and mortality in the general population. As far as we know, this is the first work on PM_2.5-related cardiovascular AOP construction. In the future, more work needs to be done to explore new markers in the safety assessment of cardiovascular toxicity induced by PM_2.5.

On the Redox-Activity and Health-Effects of Atmospheric Primary and Secondary Aerosol: Phenomenology

The RHAPS (Redox-Activity And Health-Effects Of Atmospheric Primary And Secondary Aerosol) project was launched in 2019 with the major objective of identifying specific properties of the fine atmospheric aerosol from combustion sources that are responsible for toxicological effects and can be used as new metrics for health-related outdoor pollution studies. In this paper, we present the overall methodology of RHAPS and introduce the phenomenology and the first data observed. A comprehensive physico-chemical aerosol characterization has been achieved by means of high-time resolution measurements (e.g., number size distributions, refractory chemical components, elemental composition) and low-time resolution analyses (e.g., oxidative potential, toxicological assays, chemical composition). Preliminary results indicate that, at the real atmospheric conditions observed (i.e., daily PM1 from less than 4 to more than 50 μg m−3), high/low mass concentrations of PM1, as well as black carbon (BC) and water soluble Oxidative Potential (WSOP,) do not necessarily translate into high/low toxicity. Notably, these findings were observed during a variety of atmospheric conditions and aerosol properties and with different toxicological assessments. Findings suggest a higher complexity in the relations observed between atmospheric aerosol and toxicological endpoints that go beyond the currently used PM1 metrics. Finally, we provide an outlook to companion papers where data will be analyzed in more detail, with the focus on source apportionment of PM1 and the role of source emissions on aerosol toxicity, the OP as a predictive variable for PM1 toxicity, and the related role of SOA possessing redox-active capacity, exposure-response relationships for PM1, and air quality models to forecast PM1 toxicity.

The oxidative potential of fresh and aged elemental carbon-containing airborne particles: a review

Elemental carbon is often found in ambient particulate matter (PM), and it contributes to the PM's oxidative potential (OP) and thus poses great health concerns. Previous review articles mainly focused on the methodologies in evaluating OP in PM and its relationship with selected chemical constituents, including metal ions, PAHs, and inorganic species. In recent years, growing attention has been paid to the effect of atmospheric aging processes on the OP of EC-containing airborne particles (ECCAPs). This review investigates more than 150 studies concerning the OP measurements and physico-chemical properties of both fresh and aged ECCAPs such as laboratory-generated elemental carbon (LGEC), carbon black (CB), soot (black carbon), and engineered carbon-containing nanomaterials (ECCBNs). Specifically, we summarize the characteristics of water-soluble and insoluble organic species, PAHs, quinone, and oxygen-containing functional groups (OFGs), and EC crystallinity. Both water-soluble organic carbon (WSOC) and water-insoluble organic carbon (WIOC) contribute to the OP. Low molecular weight (MW) PAHs show a higher correlation with OP than high MW PAHs. Furthermore, oxidative aging processes introduce OFGs, where quinone (CO) and epoxide (O-C-O) increase the OP of ECCAPs. In contrast, carboxyl (-COOH) and hydroxyl (-OH) slightly change the OP. The low crystallinity of EC favors the oxygen addition and forms active OFG quinone, thus increasing the OP. More detailed analyses for the EC microstructures and the organic coatings are needed to predict the OP of ECCAPs.

Influence of COVID-19 lockdown on the variation of organic aerosols: Insight into its molecular composition and oxidative potential

To prevent the transmission of the novel coronavirus disease 2019 (COVID-19), China adopted nationwide lockdown measures on January 25, 2020, leading to an evident diminution in the observed air pollutants. To investigate the influence of the lockdown on atmospheric chemistry, the specific molecular composition, oxidative potential of organic aerosols (OAs) in PM_2.5 were studied using a high-resolution orbitrap mass spectrometry at a typical coal-combustion city, Linfen, in the North China Plain (NCP). The major air pollutants including PM_2.5, PM₁₀, SO₂, NO₂, and CO were observed to be diminished by 28.6-45.4%, while O₃ was augmented by 52.5% during the lockdown compared to those before the lockdown. A significant decrease of oxygen-containing (CHO) compounds (24.7%) associated with anthropogenic acids was observed during the lockdown, implying a reduction in fossil fuel combustion. The coal-burning related sulfur-containing organosulfates (CHOS-) and nitrooxy-sulfates (CHONS-) have also shown attenuated in both their relative abundances and anthropogenic/biogenic ratios. Amine/amide-like CHON + components have decreased by 27.6%, while nitro/nitrooxy-containing CHON- compounds have only decreased by 7.1%. Multi-source nitrogen-containing (CHN) compounds have shown a moderate elimination of 24.0%, while the identified high-condensed azaarenes have fallen from 17.7% to 14.7%, implying a potential reduction in the health risk of OAs during quarantine. The measurement of OAs' oxidative potential through dithiothreitol (DTT) assay has confirmed that as it had dropped from 0.88 nmol min^-1 m^-3 to 0.80 nmol min^-1 m^-3. High correlations were observed between the abundance of OA subgroups with the concentration of PM_2.5 after the execution of the lockdown, suggesting a potential elevation in the contribution of organic components to the total PM_2.5 level. Our study provides insightful compositional and health-related information in the variation of OAs during the lockdown period and attests to the validity of joint-control strategy in controlling the level and health risks of numerous atmospheric pollutants.