Chemically tailored dielectric-to-metal transition for the design of metamaterials from nanoimprinted colloidal nanocrystals

Experimental Measurement of Particle-to-Particle Heat Transfer in Nanoparticle Solids

Thermal conductivity in nanoparticle solids has been previously reported in the range of 0.1-1 W m-1 K-1, which is a much smaller variation than the orders of magnitude differences achievable in electrical conductivity of similar systems. Both the low absolute magnitude of thermal conductivity and the relative insensitivity compared to electrical conductivity may be largely attributed to the poor interfacial thermal conductance of the many interfaces of the nanocrystal solid, but a direct experimental study of these interfaces is challenging. Here, we overcome this challenge via direct spectroscopic observation of heat flow within the components of a nanocrystal solid. These thermal transfers are studied by mixing two distinct types of particles: one that serves as a selectively excited antenna to inject heat and the other as the thermal acceptor to report the time-dependent change in temperature. Using transient spectroscopy, the equilibration between the heat donor and heat acceptor is observed to require ∼300 ps at room temperature, speeds up at reduced temperature, and has only weak sensitivity to the relative stoichiometry of the components or the intervening ligands. These results contrast strongly with the 10-20 ps time-scale of through-bond heat transfer at the ligand-particle surface and highlight the substantially lower interfacial thermal conductance of particle-to-particle transport without covalent bonding. It is also found, serendipitously, that the mixed composite films show an unexpected, substantially enhanced nonlinear absorption at the resonant wavelength of the plasmonic particles, which is tentatively attributed to a local field enhancement.

Chemically Driven Sintering of Colloidal Cu Nanocrystals for Multiscale Electronic and Optical Devices

Emerging applications of Internet of Things (IoT) technologies in smart health, home, and city, in agriculture and environmental monitoring, and in transportation and manufacturing require materials and devices with engineered physical properties that can be manufactured by low-cost and scalable methods, support flexible forms, and are biocompatible and biodegradable. Here, we report the fabrication and device integration of low-cost and biocompatible/biodegradable colloidal Cu nanocrystal (NC) films through room temperature, solution-based deposition, and sintering, achieved via chemical exchange of NC surface ligands. Treatment of organic-ligand capped Cu NC films with solutions of shorter, environmentally benign, and noncorrosive inorganic reagents, namely, SCN- and Cl-, effectively removes the organic ligands, drives NC grain growth, and limits film oxidation. We investigate the mechanism of this chemically driven sintering by systemically varying the Cu NC size, ligand reagent, and ligand treatment time and follow the evolution of their structure and electrical and optical properties. Cl--treated, 4.5 nm diameter Cu NC films yield the lowest DC resistivity, only 3.2 times that of bulk Cu, and metal-like dielectric functions at optical frequencies. We exploit the high conductivity of these chemically sintered Cu NC films and, in combination with photo- and nanoimprint-lithography, pattern multiscale structures to achieve high-Q radio frequency (RF) capacitive sensors and near-infrared (NIR) resonant optical metasurfaces.

Thermally Reconfigurable, 3D Chiral Optical Metamaterials: Building with Colloidal Nanoparticle Assemblies

The three-dimensional, geometric handedness of chiral optical metamaterials allows for the rotation of linearly polarized light and creates a differential interaction with right and left circularly polarized light, known as circular dichroism. These three-dimensional metamaterials enable polarization control of optical and spin excitation and detection, and their stimuli-responsive, dynamic switching widens applications in chiral molecular sensing and imaging and spintronics; however, there are few reconfigurable solid-state implementations. Here, we report all-solid-state, thermally reconfigurable chiroptical metamaterials composed of arrays of three-dimensional nanoparticle/metal bilayer heterostructures fabricated from coassemblies of phase change VO2 and metallic Au colloidal nanoparticles and thin films of Ni. These metamaterials show dynamic switching in the mid-infrared as VO2 is thermally cycled through an insulator-metal phase transition. The spectral range of operation is tailored in breadth by controlling the periodicity of the arrays and thus the hybridization of optical modes and in position through the mixing of VO2 and Au nanoparticles.

Tunable assembly of host-guest colloidal crystals

Entropy compartmentalization provides new self-assembly routes to colloidal host-guest (HG) structures. Leveraging host particle shape to drive the assembly of HG structures has only recently been proposed and demonstrated. However, the extent to which the guest particles can dictate the structure of the porous network of host particles has not been explored. In this work, by modifying only the guest shape, we show athermal, binary mixtures of star-shaped host particles and convex polygon-shaped guest particles assemble as many as five distinct crystal structures, including rotator and discrete rotator guest crystals, two homoporous host crystals, and one heteroporous host crystal. Edge-to-edge alignment of neighboring stars results in the formation of three distinct pore motifs, whose preferential formation is controlled by the size and shape of the guest particles. Finally, we confirm, via free volume calculations, that assembly is driven by entropy compartmentalization, where the hosts and guests contribute differently to the free energy of the system; free volume calculations also explain differences in assembly based on guest shape. These results provide guest design rules for assembling colloidal HG structures, especially on surfaces and interfaces.

Hierarchically Doped Plasmonic Nanocrystal Metamaterials

Assembling plasmonic nanocrystals in regular superlattices can produce effective optical properties not found in homogeneous materials. However, the range of these metamaterial properties is limited when a single nanocrystal composition is selected for the constituent meta-atoms. Here, we show how continuously varying doping at two length scales, the atomic and nanocrystal scales, enables tuning of both the frequency and bandwidth of the collective plasmon resonance in nanocrystal-based metasurfaces, while these features are inextricably linked in single-component superlattices. Varying the mixing ratio of indium tin oxide nanocrystals with different dopant concentrations, we use large-scale simulations to predict the emergence of a broad infrared spectral region with near-zero permittivity. Experimentally, tunable reflectance and absorption bands are observed, owing to in- and out-of-plane collective resonances. These spectral features and the predicted strong near-field enhancement establish this multiscale doping strategy as a powerful new approach to designing metamaterials for optical applications.

Chemical and Physical Properties of Photonic Noble-Metal Nanomaterials

Colloidal noble metal nanoparticles (NPs) are composed of metal cores and organic or inorganic ligand shells. These NPs support size- and shape-dependent plasmonic resonances. They can be assembled from dispersions into artificial metamolecules which have collective plasmonic resonances originating from coupled bright and dark optical electric and magnetic modes that form depending on the size and shape of the constituent NPs and their number, arrangement, and interparticle distance. NPs can also be assembled into extended 2D and 3D metamaterials that are glassy thin films or ordered thin films or crystals, also known as superlattices and supercrystals. The metamaterials have tunable optical properties that depend on the size, shape, and composition of the NPs, and on the number of NP layers and their interparticle distance. Interestingly, strong light-matter interactions in superlattices form plasmon polaritons. Tunable interparticle distances allow designer materials with dielectric functions tailorable from that characteristic of an insulator to that of a metal, and serve as strong optical absorbers or scatterers, respectively. In combination with lithography techniques, these extended assemblies can be patterned to create subwavelength NP superstructures and form large-area 2D and 3D metamaterials that manipulate the amplitude, phase, and polarization of transmitted or reflected light.

Tunable Subnanometer Gaps in Self-Assembled Monolayer Gold Nanoparticle Superlattices Enabling Strong Plasmonic Field Confinement

Nanoparticle superlattices produced with controllable interparticle gap distances down to the subnanometer range are of superior significance for applications in electronic and plasmonic devices as well as in optical metasurfaces. In this work, a method to fabricate large-area (∼1 cm²) gold nanoparticle (GNP) superlattices with a typical size of single domains at several micrometers and high-density nanogaps of tunable distances (from 2.3 to 0.1 nm) as well as variable constituents (from organothiols to inorganic S^2-) is demonstrated. Our approach is based on the combination of interfacial nanoparticle self-assembly, subphase exchange, and free-floating ligand exchange. Electrical transport measurements on our GNP superlattices reveal variations in the nanogap conductance of more than 6 orders of magnitude. Meanwhile, nanoscopic modifications in the surface potential landscape of active GNP devices have been observed following engineered nanogaps. In situ optical reflectance measurements during free-floating ligand exchange show a gradual enhancement of plasmonic capacitive coupling with a diminishing average interparticle gap distance down to 0.1 nm, as continuously red-shifted localized surface plasmon resonances with increasing intensity have been observed. Optical metasurfaces consisting of such GNP superlattices exhibit tunable effective refractive index over a broad wavelength range. Maximal real part of the effective refractive index, n_max, reaching 5.4 is obtained as a result of the extreme field confinement in the high-density subnanometer plasmonic gaps.

Three-Dimensionally Complex Phase Behavior and Collective Phenomena in Mixtures of Acoustically Powered Chiral Microspinners

The process of dynamic self-organization of small building blocks is fundamental to the emergent function of living systems and is characteristic of their out-of-equilibrium homeostasis. The ability to control the interactions of synthetic particles in large groups could lead to the realization of analogous macroscopic robotic systems with microscopic complexity. Rotationally induced self-organization has been observed in biological systems and modeled theoretically, but studies of fast, autonomously moving synthetic rotors remain rare. Here, we report switchable, out-of-equilibrium hydrodynamic assembly and phase separation in suspensions of acoustically powered chiral microspinners. Semiquantitative modeling suggests that three-dimensionally (3D) complex spinners interact through viscous and weakly inertial (streaming) flows. The interactions between spinners were studied over a range of densities to construct a phase diagram, which included gaseous dimer pairing at low density, collective rotation and multiphase separation at intermediate densities, and ultimately jamming at high density. The 3D chirality of the spinners leads to self-organization in parallel planes, forming a three-dimensionally hierarchical system that goes beyond the 2D systems that have so far been modeled computationally. Dense mixtures of spinners and passive tracer particles also show active-passive phase separation. These observations are consistent with recent theoretical predictions of the hydrodynamic coupling between rotlets generated by autonomous spinners and provide an exciting experimental window to the study of colloidal active matter and microrobotic systems.

Contact Conductance Governs Metallicity in Conducting Metal Oxide Nanocrystal Films

Although colloidal nanoparticles hold promise for fabricating electronic components, the properties of nanoparticle-derived materials can be unpredictable. Materials made from metallic nanocrystals exhibit a variety of transport behavior ranging from insulators, with internanocrystal contacts acting as electron transport bottlenecks, to conventional metals, where phonon scattering limits electron mobility. The insulator-metal transition (IMT) in nanocrystal films is thought to be determined by contact conductance. Meanwhile, criteria are lacking to predict the characteristic transport behavior of metallic nanocrystal films beyond this threshold. Using a library of transparent conducting tin-doped indium oxide nanocrystal films with varied electron concentration, size, and contact area, we assess the IMT as it depends on contact conductance and show how contact conductance is also key to predicting the temperature-dependence of conductivity in metallic films. The results establish a phase diagram for electron transport behavior that can guide the creation of metallic conducting materials from nanocrystal building blocks.

Disordered-nanoparticle-based etalon for ultrafast humidity-responsive colorimetric sensors and anti-counterfeiting displays

The development of real-time and sensitive humidity sensors is in great demand from smart home automation and modern public health. We hereby proposed an ultrafast and full-color colorimetric humidity sensor that consists of chitosan hydrogel sandwiched by a disordered metal nanoparticle layer and reflecting substrate. This hydrogel-based resonator changes its resonant frequency to external humidity conditions because the chitosan hydrogels are swollen under wet state and contracted under dry state. The response time of the sensor is ~10⁴ faster than that of the conventional Fabry-Pérot design. The origins of fast gas permeation are membrane pores created by gaps between the metal nanoparticles. Such instantaneous and tunable response of a new hydrogel resonator is then exploited for colorimetric sensors, anti-counterfeiting applications, and high-resolution displays.

Material strategies for function enhancement in plasmonic architectures

Plasmonic materials are promising for applications in enhanced sensing, energy, and advanced optical communications. These applications, however, often require chemical and physical functionality that is suited and designed for the specific application. In particular, plasmonic materials need to access the wide spectral range from the ultraviolet to the mid-infrared in addition to having the requisite surface characteristics, temperature dependence, or structural features that are not intrinsic to or easily accessed by the noble metals. Herein, we describe current progress and identify promising strategies for further expanding the capabilities of plasmonic materials both across the electromagnetic spectrum and in functional areas that can enable new technology and opportunities.

Ink-Lithography for Property Engineering and Patterning of Nanocrystal Thin Films

Next-generation devices and systems require the development and integration of advanced materials, the realization of which inevitably requires two separate processes: property engineering and patterning. Here, we report a one-step, ink-lithography technique to pattern and engineer the properties of thin films of colloidal nanocrystals that exploits their chemically addressable surface. Colloidal nanocrystals are deposited by solution-based methods to form thin films and a local chemical treatment is applied using an ink-printing technique to simultaneously modify (i) the chemical nature of the nanocrystal surface to allow thin-film patterning and (ii) the physical electronic, optical, thermal, and mechanical properties of the nanocrystal thin films. The ink-lithography technique is applied to the library of colloidal nanocrystals to engineer thin films of metals, semiconductors, and insulators on both rigid and flexible substrates and demonstrate their application in high-resolution image replications, anticounterfeit devices, multicolor filters, thin-film transistors and circuits, photoconductors, and wearable multisensors.

Self-Resonant Microlasers of Colloidal Quantum Wells Constructed by Direct Deep Patterning

Here, the first account of self-resonant fully colloidal μ-lasers made from colloidal quantum well (CQW) solution is reported. A deep patterning technique is developed to fabricate well-defined high aspect-ratio on-chip CQW resonators made of grating waveguides and in-plane reflectors. The fabricated waveguide-coupled laser, enabling tight optical confinement, assures in-plane lasing. CQWs of the patterned layers are closed-packed with sharp edges and residual-free lifted-off surfaces. Additionally, the method is successfully applied to various nanoparticles including colloidal quantum dots and metal nanoparticles. It is observed that the patterning process does not affect the nanocrystals (NCs) immobilized in the attained patterns and the different physical and chemical properties of the NCs remain pristine. Thanks to the deep patterning capability of the proposed method, patterns of NCs with subwavelength lateral feature sizes and micron-scale heights can possibly be fabricated in high aspect ratios.

None sharp corner localized surface plasmons resonance based ultrathin metasurface single layer quarter wave plate

We report on a non-sharp-corner quarter wave plate (NCQW) within the single layer of only 8 nm thickness structured by the Ag hollow elliptical ring array, where the strong localized surface plasmons (LSP) resonances are excited. By manipulating the parameters of the hollow elliptical ring, the transmitted amplitude and phase of the two orthogonal components are well controlled. The phase difference of π/2 and amplitude ratio of 1 is realized simultaneously at the wavelength of 834 nm with the transmission of 0.46. The proposed NCQW also works well in an ultrawide wavelength band of 110 nm, which suggests an efficient way of exciting LSP resonances and designing wave plates, and provides a great potential for advanced nanophotonic devices and integrated photonic systems.

Study of Complex Optical Constants of Neat Cadmium Selenide Nanoplatelets Thin Films by Spectroscopic Ellipsometry

Knowledge of tunability of complex optical constants of colloidal CdSe nanoplatelets (NPLs) thin films is essential for accurate modeling and design of NPL-containing optoelectronic devices. Here, dielectric functions, complex optical conductivities, and absorption coefficients of a series of CdSe NPL films with a varying number of atomic layers were investigated in a combination of spectroscopic ellipsometry techniques and transmittance measurements over a broad spectral range. Fine electronic structures were deciphered from the dielectric functions. Oscillator strengths at the lowest exciton resonance up to 0.62 for a series of CdSe NPL films were also determined. From our results, increasing the number of monolayers was found to boost the complex optical constants and the amplitude of the coupling strength of the fundamental exciton state mainly due to higher inorganic volume filling factors and pronounced surface passivation. Our work gives insights into both the interpretation and improvements of performance of CdSe NPL-based photoelectronic applications.

Spin-coated fluorinated PbS QD superlattice thin film with high hole mobility

Motivated by the oleophobic and electron-withdrawing nature of perfluorocarbons, we explore the effect of a trifluoromethyl coating on lead sulfide quantum dots (PbS QDs) in thin film transistor (TFT) geometry. The low surface energy conferred by the oleophobic perfluorocarbons creates QDs packed in a primitive cubic lattice with long range order, as confirmed by grazing incidence small angle X-ray scattering (GISAXS) and transmission electron microscopy (TEM). Hole mobilities as high as 0.085 cm2 V-1 s-1 were measured in the TFTs. No electron transport was observed. This suggests that the electron-withdrawing nature of the trifluoromethyl ligand is eclipsed by the excess holes present in the PbS QDs that likely stem from cation vacancies induced by the thiol group.

Towards high-throughput large-area metalens fabrication using UV-nanoimprint lithography and Bosch deep reactive ion etching

We demonstrate the fabrication of diffraction-limited dielectric metasurface lenses for NIR by the use of standard industrial high-throughput silicon processing techniques: UV nano imprint lithography (UV-NIL) combined with continuous reactive ion etching (RIE) and pulsed Bosch deep reactive ion etching (DRIE). As the research field of metasurfaces moves towards applications, these techniques are relevant as potential replacements of commonly used cost-intensive fabrication methods utilizing electron beam ithography. We show that washboard-type sidewall surface roughness arising from the Bosch DRIE process can be compensated for in the design of the metasurface, without deteriorating lens quality. Particular attention is given to fabrication challenges that must be overcome towards high-throughput production of relevance to commercial applications. Lens efficiencies are measured to be 25.5% and 29.2% at wavelengths λ = 1.55μm and λ = 1.31μm, respectively. A number of routes towards process optimization are proposed in relation to encountered challenges.

Direct Imprinting of Quasi-3D Nanophotonic Structures into Colloidal Quantum-Dot Devices

Three-dimensional (3D) subwavelength nanostructures have emerged and triggered tremendous excitement because of their advantages over the two-dimensional (2D) counterparts in fields of plasmonics, photonic crystals, and metamaterials. However, the fabrication and integration of 3D nanophotonic structures with colloidal quantum dots (CQDs) faces several technological obstacles, as conventional lithographic and etching techniques may affect the surface chemistry of colloidal nanomaterials. Here, the direct fabrication of functional quasi-3D nanophotonic structures into CQD films is demonstrated by one-step imprinting with well-controlled precision in both vertical and lateral directions. To showcase the potential of this technique, diffraction gratings, bilayer wire-grid polarizers, and resonant metal mesh long-pass filters are imprinted on CQD films without degrading the optical and electrical properties of CQD. Furthermore, a dual-diode CQD detector into an unprecedented mid-wave infrared two-channel polarization detector is functionalized by embedding an imprinted bilayer wire-grid polarizer within the CQDs. The results show that this approach offers a feasible pathway to combine quasi-3D nanostructures with colloidal materials-based optoelectronics and access a new level of light manipulation.

Chemo- and Thermomechanically Configurable 3D Optical Metamaterials Constructed from Colloidal Nanocrystal Assemblies

Nanofabrication has limited most optical metamaterials to 2D or, often with multiple patterning steps, simple 3D meta-atoms that typically have limited built-in tunability. Here, with a one-step scalable patterning process, we exploit the chemical addressability and structural adaptability of colloidal Au nanocrystal assemblies to transform 2D nanocrystal/Ti bilayers into complex, 3D-structured meta-atoms and to thermally direct their shape morphing and alter their optical properties. By tailoring the length, number, and curvature of 3D helical structures in each meta-atom, we create large-area metamaterials with chiroptical responses of as high as ∼40% transmission difference between left-hand (LCP) and right-hand (RCP) circularly polarized light (ΔT = T_RCP - T_LCP) that are suitable for broadband circular polarizers and, upon thermally configuring their shape, switch the polarity of polarization rotation. These 3D optical metamaterials provide prototypes for low-cost, large-scale fabrication of optical metamaterials for ultrathin lenses, polarizers, and waveplates.

Generation of highly integrated multiple vivid colours using a three-dimensional broadband perfect absorber

The colour printing technology based on interactions between geometric structures and light has various advantages over the pigment-based colour technology in terms of nontoxicity and ultrasmall pixel size. The asymmetric Fabry-Perot (F-P) cavity absorber is the simplest light-interacting structure, which can easily represent and control the colour by the thickness of the dielectric layer. However, for practical applications, an advanced manufacturing technique for the simultaneous generation of multiple reflective colours is required. In this study, we demonstrate F-P cavity absorbers with micropixels by overcoming the difficulties of multi-level pattern fabrication using a nanoimprinting approach. Our asymmetric F-P cavity absorber exhibited a high absorption (approximately 99%) in a wide visible light range upon the incorporation of lossy metallic materials, yielding vivid colours. A high-resolution image of eight different reflective colours was obtained by a one-step process. This demonstrates the potential of this technology for device applications such as high-resolution colour displays and colour patterns used for security functions.

Metal-insulator transition in a semiconductor nanocrystal network

Many envisioned applications of semiconductor nanocrystals (NCs), such as thermoelectric generators and transparent conductors, require metallic (nonactivated) charge transport across an NC network. Although encouraging signs of metallic or near-metallic transport have been reported, a thorough demonstration of nonzero conductivity, σ, in the 0 K limit has been elusive. Here, we examine the temperature dependence of σ of ZnO NC networks. Attaining both higher σ and lower temperature than in previous studies of ZnO NCs (T as low as 50 mK), we observe a clear transition from the variable-range hopping regime to the metallic regime. The critical point of the transition is distinctly marked by an unusual power law close to σ ∝ T ^1/5. We analyze the critical conductivity data within a quantum critical scaling framework and estimate the metal-insulator transition (MIT) criterion in terms of the free electron density, n, and interparticle contact radius, ρ.

Designing Strong Optical Absorbers via Continuous Tuning of Interparticle Interaction in Colloidal Gold Nanocrystal Assemblies

We program the optical properties of colloidal Au nanocrystal (NC) assemblies via an unconventional ligand hybridization (LH) strategy to precisely engineer interparticle interactions and design materials with optical properties difficult or impossible to achieve in bulk form. Long-chain hydrocarbon ligands used in NC synthesis are partially exchanged, from 0% to 100%, with compact thiocyanate ligands by controlling the reaction time for exchange. The resulting NC assemblies show transmittance, reflectance, optical permittivity, and direct-current (DC) resistivity that continuously traverse a dielectric-metal transition, providing analog tuning of their physical properties, unlike the digital control realized by complete exchange with ligands of varying length. Exploiting this LH strategy, we create Au NC assemblies that are strong, ultrathin film optical absorbers, as seen by a 6× increase in the extinction of infrared light compared to that in bulk Au thin films and by a temperature rise of 20 °C upon illumination with 808 nm light. Our LH strategy may be applied to the design of materials constructed from NCs of different size, shape, and composition for specific applications.

Metal Slot Color Filter Based on Thin Air Slots on Silver Block Array

The human eye perceives the color of visible light depending on the spectrum of the incident light. Hence, the ability of color expression is very important in display devices. For practical applications, the transmitted color filter requires high transmittance and vivid colors, covering full standard default color spaces (sRGB). In this paper, we propose a color filter with a silver block array on a silica substrate structure with nanoscale air slots where strong transmission is observed through the slots between silver blocks. We investigated the transmitted color by simulating the transmission spectra as functions of various structure parameters. The proposed structure with an extremely small pixel size of less than 300 nm covers 90% of sRGB color depending on the structure and has a narrow angular distribution of transmitted light.

Stimuli-Responsive Optical Nanomaterials

Responsive optical nanomaterials that can sense and translate various external stimuli into optical signals, in the forms of observable changes in appearance and variations in spectral line shapes, are among the most active research topics in nanooptics. They are intensively exploited within the regimes of the four classic optical phenomena-diffraction in photonic crystals, absorption of plasmonic nanostructures, as well as color-switching systems, refraction of assembled birefringent nanostructures, and emission of photoluminescent nanomaterials and molecules. Herein, a comprehensive review of these research activities regarding the fundamental principles and practical strategies is provided. Starting with an overview of their substantial developments during the latest three decades, each subtopic discussion is led with fundamental theories that delineate the correlation between nanostructures and optical properties and the delicate research strategies are elaborated with specific attention focused on working principles and optical performances. The unique advantages and inherent limitations of each responsive optical nanoscale platform are summarized, accompanied by empirical criteria that should be met and perspectives on research opportunities where the developments of next-generation responsive optical nanomaterials might be directed.

Flexible colloidal nanocrystal electronics

Nanometer-scale crystals of bulk group IV, III-V, II-VI, IV-VI, I-III-VI2, and metal-halide perovskite semiconductors, dispersed in solvents, are known as colloidal nanocrystals and form an excellent, solution-processable materials class for thin film and flexible electronics. This review surveys the size, composition, and surface chemistry-dependent properties of semiconductor NCs and thin films derived therefrom and provides physico-chemical insight into the recent leaps forward in the performance of NC field-effect transistors. Device design and fabrication methods are described that have enabled the demonstration and scaling up in complexity and area and scaling down in device size of flexible, colloidal nanocrystal integrated circuits. Finally, taking stock of the advances made in the science and engineering of NC systems, challenges and opportunities are presented to develop next-generation, colloidal NC electronic materials and devices, important to their potential in future computational and in Internet of Things applications.

Solution-Processable Nanocrystal-Based Broadband Fabry-Perot Absorber for Reflective Vivid Color Generation

Structural reflective colors based on Fabry-Perot (F-P) cavity resonances have attracted tremendous interest for diverse applications, such as color decoration and printing, display, and imaging devices. However, the asymmetric F-P cavity-based reflective colors proposed to date have low color purity and have difficulty to realize a desired vivid color because of a narrow absorption band characteristic in the visible light region. Here, a solution-processed, F-P ultra-broadband light absorber is newly proposed using a high lossy nanoporous material for vivid color generation. An asymmetric metal-insulator-metal structure consists of a high lossy nanoporous metallic film with coupled silver nanocrystals (Ag NCs) as the top layer. The absorbers not only increase the maximum absorption intensity up to ∼98% but also widen the bandwidth by 300 nm, resulting in high color purity in micrometer-scale pixels. Furthermore, the solution-based absorber shows potential to realize a high-resolution display pixel and anticounterfeiting devices having mechanical flexibility using the inkjet printing technology.

Nanowire Assemblies for Flexible Electronic Devices: Recent Advances and Perspectives

The fabrication of nanowire (NW)-based flexible electronics including wearable energy storage devices, flexible displays, electrical sensors, and health monitors has received great attention both in fundamental research and market requirements in our daily lives. Other than a disordered state after synthesis, NWs with designed and hierarchical structures would not only optimize the intrinsic performance, but also create new physical and chemical properties, and integration of individual NWs into well-defined structures over large areas is one of the most promising strategies to optimize the performance of NW-based flexible electronics. Here, the recent developments and achievements made in the field of flexible electronics composed of integrated NW structures are presented. The different assembly strategies for the construction of 1D, 2D, and 3D NW assemblies, especially the NW coassembly process for 2D NW assemblies, are comprehensively discussed. The improvements of different NW assemblies on flexible electronics structure and performance are described in detail to elucidate the advantages of well-defined NW assemblies. Finally, a short summary and outlook for future challenges and perspectives in this field are presented.

Chemically Engineered Au-Ag Plasmonic Nanostructures to Realize Large Area and Flexible Metamaterials

We developed a simple and systematic method to fabricate optically tunable and thermally and chemically stable Au-Ag nanocrystal-based plasmonic metamaterials. An Ag nanocrystal-based metamaterial with desirable optical properties was fabricated via nanoimprinting and ligand-exchange process. Its optical properties were controlled by selectively substituting Ag atoms with Au atoms through a spontaneous galvanic replacement reaction. The developed Au-Ag-based metamaterials provide excellent tunable plasmonic properties required for various applications in the visible and near-infrared regions by controlling the Au-Ag composition according to the conditions of the galvanic displacement. Furthermore, their thermal and chemical stabilities significantly improved because of the protective Au thin layer on the surface. Using this developed process, chemically and thermally stable and flexible plasmonic metamaterials were successfully fabricated on a flexible polyester terephthalate substrate.

3D Nanofabrication via Chemo-Mechanical Transformation of Nanocrystal/Bulk Heterostructures

Planar nanocrystal/bulk heterostructures are transformed into 3D architectures by taking advantage of the different chemical and mechanical properties of nanocrystal and bulk thin films. Nanocrystal/bulk heterostructures are fabricated via bottom-up assembly and top-down fabrication. The nanocrystals are capped by long ligands introduced in their synthesis, and therefore their surfaces are chemically addressable, and their assemblies are mechanically "soft," in contrast to the bulk films. Chemical modification of the nanocrystal surface, exchanging the long ligands for more compact chemistries, triggers large volume shrinkage of the nanocrystal layer and drives bending of the nanocrystal/bulk heterostructures. Exploiting the differential chemo-mechanical properties of nanocrystal and bulk materials, the scalable fabrication of designed 3D, cell-sized nanocrystal/bulk superstructures is demonstrated, which possess unique functions derived from nanocrystal building blocks.

Direct optical lithography of functional inorganic nanomaterials

Photolithography is an important manufacturing process that relies on using photoresists, typically polymer formulations, that change solubility when illuminated with ultraviolet light. Here, we introduce a general chemical approach for photoresist-free, direct optical lithography of functional inorganic nanomaterials. The patterned materials can be metals, semiconductors, oxides, magnetic, or rare earth compositions. No organic impurities are present in the patterned layers, which helps achieve good electronic and optical properties. The conductivity, carrier mobility, dielectric, and luminescence properties of optically patterned layers are on par with the properties of state-of-the-art solution-processed materials. The ability to directly pattern all-inorganic layers by using a light exposure dose comparable with that of organic photoresists provides an alternate route for thin-film device manufacturing.

The role of ligands in coinage-metal nanoparticles for electronics

Coinage-metal nanoparticles are key components of many printable electronic inks. They can be combined with polymers to form conductive composites and have been used as the basis of molecular electronic devices. This review summarizes the multidimensional role of surface ligands that cover their metal cores. Ligands not only passivate crystal facets and determine growth rates and shapes; they also affect size and colloidal stability. Particle shapes can be tuned via the ligand choice while ligand length, size, ω-functionalities, and chemical nature influence shelf-life and stability of nanoparticles in dispersions. When particles are deposited, ligands affect the electrical properties of the resulting film, the morphology of particle films, and the nature of the interfaces. The effects of the ligands on sintering, cross-linking, and self-assembly of particles in electronic materials are discussed.

Designing Metallic and Insulating Nanocrystal Heterostructures to Fabricate Highly Sensitive and Solution Processed Strain Gauges for Wearable Sensors

All-solution processed, high-performance wearable strain sensors are demonstrated using heterostructure nanocrystal (NC) solids. By incorporating insulating artificial atoms of CdSe quantum dot NCs into metallic artificial atoms of Au NC thin film matrix, metal-insulator heterostructures are designed. This hybrid structure results in a shift close to the percolation threshold, modifying the charge transport mechanism and enhancing sensitivity in accordance with the site percolation theory. The number of electrical pathways is also manipulated by creating nanocracks to further increase its sensitivity, inspired from the bond percolation theory. The combination of the two strategies achieves gauge factor up to 5045, the highest sensitivity recorded among NC-based strain gauges. These strain sensors show high reliability, durability, frequency stability, and negligible hysteresis. The fundamental charge transport behavior of these NC solids is investigated and the combined site and bond percolation theory is developed to illuminate the origin of their enhanced sensitivity. Finally, all NC-based and solution-processed strain gauge sensor arrays are fabricated, which effectively measure the motion of each finger joint, the pulse of heart rate, and the movement of vocal cords of human. This work provides a pathway for designing low-cost and high-performance electronic skin or wearable devices.

Hierarchical Materials Design by Pattern Transfer Printing of Self-Assembled Binary Nanocrystal Superlattices

We demonstrate the fabrication of hierarchical materials by controlling the structure of highly ordered binary nanocrystal superlattices (BNSLs) on multiple length scales. Combinations of magnetic, plasmonic, semiconducting, and insulating colloidal nanocrystal (NC) building blocks are self-assembled into BNSL membranes via the liquid-interfacial assembly technique. Free-standing BNSL membranes are transferred onto topographically structured poly(dimethylsiloxane) molds via the Langmuir-Schaefer technique and then deposited in patterns onto substrates via transfer printing. BNSLs with different structural motifs are successfully patterned into various meso- and microstructures such as lines, circles, and even three-dimensional grids across large-area substrates. A combination of electron microscopy and grazing incidence small-angle X-ray scattering (GISAXS) measurements confirm the ordering of NC building blocks in meso- and micropatterned BNSLs. This technique demonstrates structural diversity in the design of hierarchical materials by assembling BNSLs from NC building blocks of different composition and size by patterning BNSLs into various size and shape superstructures of interest for a broad range of applications.

High-strength magnetically switchable plasmonic nanorods assembled from a binary nanocrystal mixture

Next-generation 'smart' nanoparticle systems should be precisely engineered in size, shape and composition to introduce multiple functionalities, unattainable from a single material. Bottom-up chemical methods are prized for the synthesis of crystalline nanoparticles, that is, nanocrystals, with size- and shape-dependent physical properties, but they are less successful in achieving multifunctionality. Top-down lithographic methods can produce multifunctional nanoparticles with precise size and shape control, yet this becomes increasingly difficult at sizes of ∼10 nm. Here, we report the fabrication of multifunctional, smart nanoparticle systems by combining top-down fabrication and bottom-up self-assembly methods. Particularly, we template nanorods from a mixture of superparamagnetic Zn_0.2Fe_2.8O₄ and plasmonic Au nanocrystals. The superparamagnetism of Zn_0.2Fe_2.8O₄ prevents these nanorods from spontaneous magnetic-dipole-induced aggregation, while their magnetic anisotropy makes them responsive to an external field. Ligand exchange drives Au nanocrystal fusion and forms a porous network, imparting the nanorods with high mechanical strength and polarization-dependent infrared surface plasmon resonances. The combined superparamagnetic and plasmonic functions enable switching of the infrared transmission of a hybrid nanorod suspension using an external magnetic field.

Assembly and Electronic Applications of Colloidal Nanomaterials

Artificial solids and thin films assembled from colloidal nanomaterials give rise to versatile properties that can be exploited in a range of technologies. In particular, solution-based processes allow for the large-scale and low-cost production of nanoelectronics on rigid or mechanically flexible substrates. To achieve this goal, several processing steps require careful consideration, including nanomaterial synthesis or exfoliation, purification, separation, assembly, hybrid integration, and device testing. Using a ubiquitous electronic device - the field-effect transistor - as a platform, colloidal nanomaterials in three electronic material categories are reviewed systematically: semiconductors, conductors, and dielectrics. The resulting comparative analysis reveals promising opportunities and remaining challenges for colloidal nanomaterials in electronic applications, thereby providing a roadmap for future research and development.

Large Transient Optical Modulation of Epsilon-Near-Zero Colloidal Nanocrystals

Epsilon-near-zero materials may be synthesized as colloidal nanocrystals which display large magnitude subpicosecond switching of infrared localized surface plasmon resonances. Such nanocrystals offer a solution-processable, scalable source of tunable metamaterials compatible with arbitrary substrates. Under intraband excitation, these nanocrystals display a red-shift of the plasmon feature arising from the low electron heat capacities and conduction band nonparabolicity of the oxide. Under interband pumping, they show in an ultrafast blueshift of the plasmon resonance due to transient increases in the carrier density. Combined with their high-quality factor, large changes in relative transmittance (+86%) and index of refraction (+85%) at modest control fluences (<5 mJ/cm²) suggest that these materials offer great promise for all-optical switching, wavefront engineering, and beam steering operating at terahertz switching frequencies.

Magneto-Optical Response of Cobalt Interacting with Plasmonic Nanoparticle Superlattices

The magneto-optical Kerr effect is a striking phenomenon whereby the optical properties of a material change under an applied magnetic field. Though promising for sensing and data storage technology, these properties are typically weak in magnitude and are inherently limited by the bulk properties of the active magnetic material. In this work, we theoretically demonstrate that plasmonic thin-film assemblies on a cobalt substrate can achieve tunable transverse magneto-optical (TMOKE) responses throughout the visible and near-infrared (300-900 nm). In addition to exhibiting wide spectral tunability, this response can be varied in sign and magnitude by changing the plasmonic volume fraction (1-20%), the composition and arrangement of the assembly, and the shape of the nanoparticle inclusions. Of particular interest is the newly discovered sensitivity of the sign and intensity of the TMOKE spectrum to collective metallic plasmonic behavior in silver, mixed silver-gold, and anisotropic superlattices.

Magneto-Optical Response of Cobalt Interacting with Plasmonic Nanoparticle Superlattices

The magneto-optical Kerr effect is a striking phenomenon whereby the optical properties of a material change under an applied magnetic field. Though promising for sensing and data storage technology, these properties are typically weak in magnitude and are inherently limited by the bulk properties of the active magnetic material. In this work, we theoretically demonstrate that plasmonic thin-film assemblies on a cobalt substrate can achieve tunable transverse magneto-optical (TMOKE) responses throughout the visible and near-infrared (300-900 nm). In addition to exhibiting wide spectral tunability, this response can be varied in sign and magnitude by changing the plasmonic volume fraction (1-20%), the composition and arrangement of the assembly, and the shape of the nanoparticle inclusions. Of particular interest is the newly discovered sensitivity of the sign and intensity of the TMOKE spectrum to collective metallic plasmonic behavior in silver, mixed silver-gold, and anisotropic superlattices.

Tunable longitudinal modes in extended silver nanoparticle assemblies

Nanostructured materials with tunable properties are of great interest for a wide range of applications. The self-assembly of simple nanoparticle building blocks could provide an inexpensive means to achieve this goal. Here, we generate extended anisotropic silver nanoparticle assemblies in solution using controlled amounts of one of three inexpensive, widely available, and environmentally benign short ditopic ligands: cysteamine, dithiothreitol and cysteine in aqueous solution. The self-assembly of our extended structures is enforced by hydrogen bonding. Varying the ligand concentration modulates the extent and density of these unprecedented anisotropic structures. Our results show a correlation between the chain nature of the assembly and the generation of spectral anisotropy. Deuterating the ligand further enhances the anisotropic signal by triggering more compact aggregates and reveals the importance of solvent interactions in assembly size and morphology. Spectral and morphological evolutions of the AgNPs assemblies are followed via UV-visible spectroscopy and transmission electron microscopy (TEM). Spectroscopic measurements are compared to calculations of the absorption spectra of randomly assembled silver chains and aggregates based on the discrete dipole approximation. The models support the experimental findings and reveal the importance of aggregate size and shape as well as particle polarizability in the plasmon coupling between nanoparticles.

Templated Self-Assembly of Ultrathin Gold Nanowires by Nanoimprinting for Transparent Flexible Electronics

We fabricated flexible, transparent, and conductive metal grids as transparent conductive materials (TCM) with adjustable properties by direct nanoimprinting of self-assembling colloidal metal nanowires. Ultrathin gold nanowires (diameter below 2 nm) with high mechanical flexibility were confined in a stamp and readily adapted to its features. During drying, the wires self-assembled into dense bundles that percolated throughout the stamp. The high aspect ratio and the bundling yielded continuous, hierarchical superstructures that connected the entire mesh even at low gold contents. A soft sintering step removed the ligand barriers but retained the imprinted structure. The material exhibited high conductivities (sheet resistances down to 29 Ω/sq) and transparencies that could be tuned by changing wire concentration and stamp geometry. We obtained TCMs that are suitable for applications such as touch screens. Mechanical bending tests showed a much higher bending resistance than commercial ITO: conductivity dropped by only 5.6% after 450 bending cycles at a bending radius of 5 mm.

Designed Assembly and Integration of Colloidal Nanocrystals for Device Applications

Colloidal nanocrystals have been intensively studied over the past three decades due to their unique properties that originate, in large part, from their nanometer-scale sizes. For applications in electronic and optoelectronic devices, colloidal nanoparticles are generally employed as assembled nanocrystal solids, rather than as individual particles. Consequently, tailoring 2D patterns as well as 3D architectures of assembled nanocrystals is critical for their various applications to micro- and nanoscale devices. Here, recent advances in the designed assembly, film fabrication, and printing/integration methods for colloidal nanocrystals are presented. The advantages and drawbacks of these methods are compared, and various device applications of assembled/integrated colloidal nanocrystal solids are discussed.

Reversible switching of structural and plasmonic properties of liquid-crystalline gold nanoparticle assemblies

Hybrid materials built of spherical gold nanoparticles with three different sizes covered with (pro)mesogenic molecules have been prepared. Small-angle X-ray diffraction studies showed that after thermal annealing most of the obtained materials formed long-range ordered assemblies. Variation of the (pro)mesogenic ligand architecture enabled us to achieve a switchable material, which could be reversibly reconfigured between 3D long-range ordered structures with tetragonal and face centred cubic symmetries. This structural reconfiguration induces changes to the plasmonic response of the material. This work demonstrates that it is possible to use LC-based self-assembling phenomena to prepare dynamic materials with structural properties important for the development of active plasmonic metamaterials.

Quantifying "Softness" of Organic Coatings on Gold Nanoparticles Using Correlated Small-Angle X-ray and Neutron Scattering

Small-angle X-ray and neutron scattering provide powerful tools to selectively characterize the inorganic and organic components of hybrid nanomaterials. Using hydrophobic gold nanoparticles coated with several commercial and dendritic thiols, the size of the organic layer on the gold particles is shown to increase from 1.2 to 4.1 nm. A comparison between solid-state diffraction from self-assembled lattices of nanoparticles and the solution data from neutron scattering suggests that engineering softness/deformability in nanoparticle coatings is less straightforward than simply increasing the organic size. The "dendritic effect" in which higher generations yield increasingly compact molecules explains changes in the deformability of organic ligand shells.

Substitutional doping in nanocrystal superlattices

Doping is a process in which atomic impurities are intentionally added to a host material to modify its properties. It has had a revolutionary impact in altering or introducing electronic, magnetic, luminescent, and catalytic properties for several applications, for example in semiconductors. Here we explore and demonstrate the extension of the concept of substitutional atomic doping to nanometre-scale crystal doping, in which one nanocrystal is used to replace another to form doped self-assembled superlattices. Towards this goal, we show that gold nanocrystals act as substitutional dopants in superlattices of cadmium selenide or lead selenide nanocrystals when the size of the gold nanocrystal is very close to that of the host. The gold nanocrystals occupy random positions in the superlattice and their density is readily and widely controllable, analogous to the case of atomic doping, but here through nanocrystal self-assembly. We also show that the electronic properties of the superlattices are highly tunable and strongly affected by the presence and density of the gold nanocrystal dopants. The conductivity of lead selenide films, for example, can be manipulated over at least six orders of magnitude by the addition of gold nanocrystals and is explained by a percolation model. As this process relies on the self-assembly of uniform nanocrystals, it can be generally applied to assemble a wide variety of nanocrystal-doped structures for electronic, optical, magnetic, and catalytic materials.

Defect tolerance and the effect of structural inhomogeneity in plasmonic DNA-nanoparticle superlattices

Bottom-up assemblies of plasmonic nanoparticles exhibit unique optical effects such as tunable reflection, optical cavity modes, and tunable photonic resonances. Here, we compare detailed simulations with experiment to explore the effect of structural inhomogeneity on the optical response in DNA-gold nanoparticle superlattices. In particular, we explore the effect of background environment, nanoparticle polydispersity (>10%), and variation in nanoparticle placement (∼5%). At volume fractions less than 20% Au, the optical response is insensitive to particle size, defects, and inhomogeneity in the superlattice. At elevated volume fractions (20% and 25%), structures incorporating different sized nanoparticles (10-, 20-, and 40-nm diameter) each exhibit distinct far-field extinction and near-field properties. These optical properties are most pronounced in lattices with larger particles, which at fixed volume fraction have greater plasmonic coupling than those with smaller particles. Moreover, the incorporation of experimentally informed inhomogeneity leads to variation in far-field extinction and inconsistent electric-field intensities throughout the lattice, demonstrating that volume fraction is not sufficient to describe the optical properties of such structures. These data have important implications for understanding the role of particle and lattice inhomogeneity in determining the properties of plasmonic nanoparticle lattices with deliberately designed optical properties.

Large-Area Nanoimprinted Colloidal Au Nanocrystal-Based Nanoantennas for Ultrathin Polarizing Plasmonic Metasurfaces

We report a low-cost, large-area fabrication process using solution-based nanoimprinting and compact ligand exchange of colloidal Au nanocrystals to define anisotropic, subwavelength, plasmonic nanoinclusions for optical metasurfaces. Rod-shaped, Au nanocrystal-based nanoantennas possess strong, localized, plasmonic resonances able to control polarization. We fabricate metasurfaces from rod-shaped nanoantennas tailored in size and spacing to demonstrate Au nanocrystal-based quarter-wave plates that operate with extreme bandwidths and provide high polarization conversion efficiencies in the near-to-mid infrared.

Sintering of ultrathin gold nanowires for transparent electronics

Ultrathin gold nanowires (AuNWs) with diameters below 2 nm and high aspect ratios are considered to be a promising base material for transparent electrodes. To achieve the conductivity expected for this system, oleylamine must be removed. Herein we present the first study on the conductivity, optical transmission, stability, and structure of AuNW networks before and after sintering with different techniques. Freshly prepared layers consisting of densely packed AuNW bundles were insulating and unstable, decomposing into gold spheres after a few days. Plasma treatments increased the conductivity and stability, coarsened the structure, and left the optical transmission virtually unchanged. Optimal conditions reduced sheet resistances to 50 Ω/sq.