Quadruple perovskite ruthenate as a highly efficient catalyst for acidic water oxidation

Metal-oxygen bonding characteristics dictate activity and stability differences of RuO2 and IrO2 in the acidic oxygen evolution reaction

Ruthenium dioxide (RuO2) and iridium dioxide (IrO2) serve as benchmark electrocatalysts for the acidic oxygen evolution reaction (OER), yet their intrinsic activity-stability relationships remain elusive. Herein, we employ density functional theory (DFT) calculations to systematically investigate the origin of divergent OER catalytic behaviors between RuO2 and IrO2 in acidic media. Mechanistic analyses reveal that RuO2 follows the adsorbate evolution mechanism with superior activity (theoretical overpotential: 0.698 V vs. 0.909 V for IrO2), while IrO2 demonstrates enhanced stability due to a higher dissolution energy change (>2.9 eV vs. -0.306 eV for RuO2). Electronic structure analysis reveals that RuO2 exhibits ionic-dominated metal-oxygen bonds with delocalized electron distribution, facilitating intermediate desorption but promoting detrimental RuO42- dissolution. In contrast, IrO2 features covalent bonding characteristics with more electron filling in Ir-oxygen bonds (2.942 vs. 2.412 for RuO2), thereby stabilizing surface intermediates against dissolution at the expense of higher OER barriers. This work establishes a clear correlation between the bonding nature and electrocatalytic performance metrics, offering fundamental insights for the rational design of acid-stable OER electrocatalysts with optimized activity-stability relationships.

Atomic Ga triggers spatiotemporal coordination of oxygen radicals for efficient water oxidation on crystalline RuO2

Advancements in proton-exchange membrane water electrolyzer depend on developing oxygen evolution reaction electrocatalysts that synergize high activity with stability. Here, we introduce an approach aimed at elevating oxygen evolution reaction performance by enhancing the spatiotemporal coordination of oxygen radicals to promote efficient O-O coupling. A dense, single-atom configuration of oxygen radical donors within interconnected RuO2 nanocrystal framework is demonstrated. The stable oxygen radicals on gallium sites with adaptable Ga-O bonds are thermodynamically favorable to attract those from Ru sites, addressing dynamic adaptation challenges and boosting O-O coupling efficiency. The optimized catalyst achieves a low overpotential of 188 mV at 10 mA cm-2, operates robustly for 800 h at 100 mA cm-2 in acidic conditions, and shows a large current density of 3 A cm-2 at 1.788 V, with stable performance at 0.5 A cm-2 for 200 h, confirming its long-term viability in proton-exchange membrane water electrolyzer applications.

Amorphous RuO2 Nanozymes with an Excellent Catalytic Efficiency Superior to Natural Peroxidases

Developing efficient peroxidase-like nanozymes to surpass natural enzymes remains a significant challenge. Herein, an amorphous RuO2 nanozyme with peroxidase-like activity is synthesized for activating H2O2 with a specific activity of 1492.52 U mg-1, outperforming the crystalline RuO2 nanozymes by a factor of 22 and far superior to natural peroxidases. Amorphous RuO2 nanozymes with long-range disordered atomic arrangements can effectively elongate the O─O bonds in H2O2. Abundant oxygen vacancies in amorphous RuO2 nanozymes lead to an upshift of the d-band center, enhancing the exceptional adsorption strength of H2O2, which improve the electron transfer efficiency and ensure superior peroxidase-like activity. Accordingly, a nanozyme-linked immunosorbent assay is developed for the precise and sensitive detection of prostate-specific antigens with a detection limit as low as 0.52 pg mL-1. This study introduces a simple approach for developing high-performance peroxidase-like nanozymes to improve the analytical performances of prostate-specific antigens in clinical diagnostics.

Design and synthesis of autogenous growth NiFe bimetallic phosphide catalysts on a nickel iron foam-like substrate for efficient overall water splitting

The design of low-cost, highly active, and stable electrocatalysts is pivotal for advancing water electrolysis technologies. In this study, carbonyl iron powder (CIP) was anchored within the pores of nickel foam (NF) by electroplating nickel, creating nickel iron foam-like (NFF-L) substrates. Subsequently, nickel-iron hydroxide (NiFe-OH) was synthesized on the NFF-L substrate employing an autogenous growth strategy, followed by a phosphating treatment that produced a nanoflower-like NiFe bimetallic phosphide heterostructure catalyst (Fe2P-Ni2P@NFF-L). This novel method of substrate filling enhanced space utilization, while the presence of micropores and mesopores on the nanosheet surfaces facilitated electrolyte infiltration and ion diffusion, thereby significantly increasing the specific surface area. The formation of a two-phase heterointerface accelerated electron transmission and transfer, enhancing water dissociation and the adsorption of hydrogen adatoms (Had). In addition, under anodic oxidation conditions, the dynamic surface reconstruction facilitated a synergistic interaction between the highly active β-NiOOH and α-FeOOH phases, which significantly contributed to the catalyst's exceptional intrinsic activity for the oxygen evolution reaction (OER).

Cobalt-Doped MnFe2O4 Spinel Coupled with Nitrogen-Doped Reduced Graphene Oxide: Enhanced Oxygen Electrocatalytic Activity for Zinc-Air Batteries

MFCO spinel anchored on N-rGO is synthesized by a two-step hydrothermal method as a bifunctional electrocatalyst. Its physicochemical properties have been characterized and tested, and it is applied to zinc-air batteries. The experimental and theoretical calculations show that the MFCO is uniformly distributed on the surface of N-rGO. When MFCO is anchored on the conducting N-rGO, a synergistic effect occurs between the Co-N bonds, which changes the arrangement of the C-N bonds from the sp2 orientation to the sp3 form. The ORR catalytic pathway of the MFCO/N-rGO electrocatalyst is dominated by 4-electron transfer, with a half-wave potential of 0.8003 V, an overpotential value of 352 mV, and a small potential difference (ΔE = 0.78 V). With a charge/discharge voltage difference of about 0.88 V, the voltage gap remains almost unchanged for a long period after 650 h, showing excellent stability. The improved catalytic performance is attributed to Co acting as an active site, and the doping of Co induces the Jahn-Teller effect, which alters the electronic structure of spinel, shifts the d-band center upward, enhances the adsorption of oxygen intermediates, and promotes the oxygen electrocatalytic reaction. This study provides a low-cost and promising bifunctional oxygen electrocatalyst for zinc-air batteries.

Intelligent design and synthesis of energy catalytic materials

Efficient energy conversion and storage are crucial for the sustainable development and growth of renewable energy sources. However, the limited varieties of traditional energy catalytic materials cannot match the fast-expansion requirement of raising various clean energy for industrial applications. Thus, accelerating the design and synthesis of high-performance catalysts is necessary for the application of energy equipment. Recently, with artificial intelligence (AI) technology being advanced by leaps and bounds, it is feasible to efficiently and precisely screen materials and optimize synthesis conditions in a huge unknown space. Here, we introduce and review AI techniques used in the development of catalytic materials in detail. We describe the workflow for designing and synthesizing new materials using machine learning (ML) and robotics. We summarize the sources of data collection, the intelligent algorithms commonly used to build ML models, and the laboratory modules for the intelligent synthesis of materials. We provide the illustrations of predicting the properties of catalytic materials with ML assistance in different material types. In addition, we present the potential strategies for finding material synthesis pathways, and advances in robotics to accelerate high-performance catalytic materials synthesis in the review. Finally, the summary, challenges, and potential directions in the development of AI-assisted catalytic materials are presented and discussed.

Crystalline Structural Engineering of an Electrical Insulator Into A Highly-Active Electrocatalyst for Oxygen Evolution

The development of highly efficient electrocatalysts for oxygen evolution reaction (OER) is crucial for water splitting. Due to flexible lattice structure and tunable electronic properties, perovskite oxides are considered promising candidates for oxygen evolution catalysts. In this work, pulsed laser deposition (PLD) is employed to fabricate well-defined amorphous SrRuO3 (SRO) films (insulator) on a glassy carbon (GC) substrate as the OER catalyst, demonstrating superior OER catalytic activity compare with crystalline SRO. The mechanism is also investigated by which oxygen partial pressure affects the activity of amorphous SRO. Changes in oxygen partial pressure can affect the content of oxygen vacancies and active site valence in amorphous SRO, with these factors working in concert to regulate the OER activity of the films. Furthermore, it is provide evidence that amorphous SRO can trigger a self-adaptive process, which plays a crucial role in electrochemical reaction. This findings suggest that amorphous structure engineering can be an effective and versatile strategy for designing next-generation high-performance catalysts for OER applications.

Cobalt-Doped Ru@RuO2 Core-Shell Heterostructure for Efficient Acidic Water Oxidation in Low-Ru-Loading Proton Exchange Membrane Water Electrolyzers

Proton exchange membrane water electrolysis (PEMWE) is a highly promising hydrogen production technology for enabling a sustainable energy supply. Herein, we synthesize a single-atom Co-doped core-shell heterostructured Ru@RuO2 (Co-Ru@RuO2) catalyst via a combination of ultrafast pulse-heating and calcination methods as an iridium (Ir)-free and durable oxygen evolution reaction (OER) catalyst in acidic conditions. Co-Ru@RuO2 exhibits a low overpotential of 203 mV and excellent stability over a 400 h durability test at 10 mA cm-2. When implemented in industrial PEMWE devices, a current density of 1 A cm-2 is achieved with only 1.58 V under an extremely low catalyst loading of 0.34 mgRu cm-2, which is decreased by 4 to 6 times as compared to other reported Ru-based catalysts. Even at 500 mA cm-2, the PEMWE device could work stably for more than 200 h. Structural characterizations and density functional theory (DFT) calculations reveal that the single-atom Co doping and the core-shell heterostructure of Ru@RuO2 modulate the electronic structure of pristine RuO2, which reduce the energy barriers of OER and improve the stability of surface Ru. This work provides a unique avenue to guide future developments on low-cost PEMWE devices for hydrogen production.

Mitigating A-Site Segregation in Pyrochlore Oxides: Enhancing Oxygen Evolution Reaction Performance through Surface Engineering

Significant progress has been achieved in enhancing the oxygen evolution reaction (OER) performance of pyrochloric oxides through geometric and electronic structure regulation. However, the issue of A-site cation segregation in these materials remains underexplored. In this study, Bi2Ru2O7, a promising OER electrocatalyst, is synthesized via a sol-gel method, and its surface is modified using l-ascorbic acid to address Bi3+ segregation. This treatment selectively removes the Bi2O3 passivation layer, inducing an amorphous RuOx layer that forms a heterostructure with crystalline Bi2Ru2O7. This engineered structure significantly enhances catalytic performance, reducing the overpotential to 259 mV at 10 mA cm-2 and maintaining stability after continuous operation for >30 h. Comprehensive characterization, electrochemical testing, and density functional theory calculations reveal that the improvements stem from an increased number of oxygen vacancies and enhanced electron transfer. This work underscores the importance of surface engineering to mitigate A-site segregation, providing a new strategy for optimizing Ru-based pyrochlores in energy conversion technologies.

A General Sol-Gel Route to Fabricate Large-Area Highly-Ordered Metal Oxide Arrays Toward High-Performance Zinc-Air Batteries

A universal method is demonstrated for the fabrication of large-area highly ordered microporous arrayed metal oxides based on a high-quality self-assembly opal template combined with a sucrose-assisted sol-gel technique. Sucrose as a chelating agent optimizes precursor infiltration and regulates both oxide formation and the melting process of polystyrene templates, thus preventing crack formation during infiltration and calcination. As a result, over 20 metal element-based 3DOM oxides with arbitrary compositions are successfully prepared. Therein, a champion electrocatalyst RuCoOx-IO exhibits outstanding bifunctional oxygen activity with an ultra-narrow oxygen potential gap of 0.598 V, and the Zn-air batteries based on RuCoOx-IO air cathode operates for 1380 h under fast-charging cycling (50 mA cm-2), and reaches a high energy efficiency of 69.5% in discharge-charge cycling. In situ spectroscopy characterizations and density functional theory reveal that the rational construction of Ru─O─Co heterointerface with decoupled multi-active sites and mutual coupling of RuO2 and Co3O4 facilitate interfacial electron transfer, leading to an optimized d-band centers of active Ru/Co and a weakened spin interaction between oxygen intermediates and Co sites, so as to enhance the adsorption ability of *OOH on interfacial Co sites for fast ORR kinetics while favoring the desorption of oxygen intermediates on interfacial Ru during OER.

Machine learning models for easily obtainable descriptors of the electrocatalytic properties of Ag-Pd-Ir nanoalloys toward the formate oxidation reaction

Direct formate fuel cells (DFFCs) have received increasing attention due to their environmentally benign and highly safe characteristics. However, the absence of highly active electrocatalysts for the formate oxidation reaction (FOR) restricts their widespread application. Currently, the design of FOR catalysts, which relies on experimental trial-and-error and high-throughput DFT calculations, is costly and time-consuming. In this study, based on a DFT dataset of FOR overpotentials for 137 Ag-Pd-Ir nanoalloy catalysts, six machine learning (ML) models were trained, where the K-nearest neighbors (KNN) model demonstrated the best performance, with an R2 value of 0.94, an MAE value of 0.041 V and an RMSE value of 0.050 V. Using the KNN model, six optimal catalysts with an overpotential of 0.48 V were screened from 310 candidate catalysts, with an MAE value as low as 0.004 V compared to the DFT results, proving the accuracy of the ML model. This work provides a novel strategy to accelerate the design of high-performance catalysts.

Beyond conventional structures: emerging complex metal oxides for efficient oxygen and hydrogen electrocatalysis

The core of clean energy technologies such as fuel cells, water electrolyzers, and metal-air batteries depends on a series of oxygen and hydrogen-based electrocatalysis reactions, including the oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), which necessitate cost-effective electrocatalysts to improve their energy efficiency. In the recent decade, complex metal oxides (beyond simple transition metal oxides, spinel oxides and ABO3 perovskite oxides) have emerged as promising candidate materials with unexpected electrocatalytic activities for oxygen and hydrogen electrocatalysis owing to their special crystal structures and unique physicochemical properties. In this review, the current progress in complex metal oxides for ORR, OER, and HER electrocatalysis is comprehensively presented. Initially, we present a brief description of some fundamental concepts of the ORR, OER, and HER and a detailed description of complex metal oxides, including their physicochemical characteristics, synthesis methods, and structural characterization. Subsequently, we present a thorough overview of various complex metal oxides reported for ORR, OER, and HER electrocatalysis thus far, such as double/triple/quadruple perovskites, perovskite hydroxides, brownmillerites, Ruddlesden-Popper oxides, Aurivillius oxides, lithium/sodium transition metal oxides, pyrochlores, metal phosphates, polyoxometalates and other specially structured oxides, with emphasis on the designed strategies for promoting their performance and structure-property-performance relationships. Moreover, the practical device applications of complex metal oxides in fuel cells, water electrolyzers, and metal-air batteries are discussed. Finally, some concluding remarks summarizing the challenges, perspectives, and research trends of this topic are presented. We hope that this review provides a clear overview of the current status of this emerging field and stimulate future efforts to design more advanced electrocatalysts.

Binary ruthenium dioxide and nickel oxide ultrafine particles loaded on carbon nanotubes for high-stability oxygen evolution reaction at high current densities

RuO2 is an efficient electrocatalyst for the oxygen evolution reaction (OER). However, during the OER process, RuO2 is prone to oxidation into Rux+ (x > 4), leading to its dissolution in the electrolyte and resulting in poor stability of RuO2. Here, we report a bicomponent electrocatalyst, NiO and RuO2 co-loaded on carbon nanotubes (RuO2/NiO/CNT). The results demonstrate that the introduction of NiO suppresses the over-oxidation of RuO2 during the OER process, not only inheriting the excellent catalytic performance of RuO2, but also significantly enhancing the stability of the catalyst for OER at high current densities. In contrast to RuO2/CNT, RuO2/NiO/CNT shows no significant change in activity after 150 h of OER at a current density of 100 mA cm-2. Density functional theory (DFT) calculations indicate that NiO transfers a large number of electrons to RuO2, thereby reducing the oxidation state of Ru. In conclusion, this study provides a detailed analysis of the phenomenon where low-valent metal oxides have the ability to enhance the stability of RuO2 catalysts.

Developing Catalysts for Membrane Electrode Assemblies in High Performance Polymer Electrolyte Membrane Water Electrolyzers

Extensive research is underway to achieve carbon neutrality through the production of green hydrogen via water electrolysis, powered by renewable energy. Polymer membrane water electrolyzers, such as proton exchange membrane water electrolyzer (PEMWE) and anion exchange membrane water electrolyzer (AEMWE), are at the forefront of this research. Developing highly active and durable electrode catalysts is crucial for commercializing these electrolyzers. However, most research is conducted in half-cell setups, which may not fully represent the catalysts' effectiveness in membrane-electrode-assembly (MEA) devices. This review explores the catalysts developed for high-performance PEMWE and AEMWE MEA systems. Only the catalysts reporting on the MEA performance were discussed in this review. In PEMWE, strategies aim to minimize Ir use for the oxygen evolution reaction (OER) by maximizing activity, employing metal oxide-based supports, integrating secondary elements into IrOx lattices, or exploring non-Ir materials. For AEMWE, the emphasis is on enhancing the performance of NiFe-based and Co-based catalysts by improving electrical conductivity and mass transport. Pt-based and Ni-based catalysts for the hydrogen evolution reaction (HER) in AEMWE are also examined. Additionally, this review discusses the unique considerations for catalysts operating in pure water within AEMWE systems.

Ultrathin and Conformal Depletion Layer of Core/Shell Heterojunction Enables Efficient and Stable Acidic Water Oxidation

Ru-based electrocatalysts hold great promise for developing affordable proton exchange membrane (PEM) electrolyzers. However, the harsh acidic oxidative environment of the acidic oxygen evolution reaction (OER) often causes undesirable overoxidation of Ru active sites and subsequent serious activity loss. Here, we present an ultrathin and conformal depletion layer attached to the Schottky heterojunction of core/shell RuCo/RuCoOx that not only maximizes the availability of active sites but also improves its durability and intrinsic activity for acidic OER. Operando synchrotron characterizations combined with theoretical calculations elucidate that the lattice strain and charge transfer induced by Schottky heterojunction substantially regulate the electronic structures of active sites, which modulates the OER pathway and suppresses the overoxidation of Ru species. Significantly, the closed core/shell architecture of the RuCo/RuCoOx ensures the structure integrity of the Schottky heterojunction under acidic OER conditions. As a result, the core/shell RuCo/RuCoOx Schottky heterojunction exhibits an unprecedented durability up to 250 0 h at 10 mA cm-2 with an ultralow overpotential of ∼170 mV at 10 mA cm-2 in 0.5 M H2SO4. The RuCo/RuCoOx catalyst also demonstrates superior durability in a proton exchange membrane (PEM) electrolyzer, showcasing the potential for practical applications.

Synergistic Sr Activation and Cr Buffering Effect on RuO2 Electronic Structures for Enhancing the Acidic Oxygen Evolution Reaction

The oxygen evolution reaction (OER) performance of ruthenium-based oxides strongly correlates with the electronic structures of Ru. However, the widely adopted monometal doping method unidirectionally regulates only the electronic structures, often failing to balance the activity and stability. Here, we propose an "elastic electron transfer" strategy to achieve bidirectional optimization of the electronic structures of Sr, Cr codoped RuO2 catalysts for acidic OER. The introduction of electron-withdrawing Sr intrinsically activates the Ru sites by increasing the oxidation state of Ru. Simultaneously, Cr acts as an electron buffer, donating electrons to Ru in the presence of Sr in the as-prepared catalysts and absorbing excess electrons from Sr leaching during the OER. Such a bidirectional regulation feature of Cr prevents overoxidation of Ru and maintains its high oxidation state during the OER. The optimal Ru3Cr1Sr0.175 catalyst exhibits a low overpotential (214 mV @ 10 mA cm-2) and excellent stability (over 300 h).

One Stone, Three-Birds Approach: Ultra-active Ru/N, S-MoO2/CNTs Electrocatalyst for Overall Water Splitting in Wide Electrode Applications (NF, GC, and CC)

The construction of exceptionally multifunctional electrocatalysts is essential for various applications, but it poses significant challenges. A novel electrocatalyst, denoted as Ru/N, S-MoO2/CNTs, was successfully synthesized using a combination of mechano-grinding and hydrothermal/calcination techniques. The Ru/N, S-MoO2/CNTs demonstrates ultrasmall overpotentials of 12 and 163 mV in NF, 51 and 167 mV in GCE, and 54 and 173 mV in CC for HER and OER, respectively, at a current density of 10 mA/cm2 in alkaline medium. To accomplish electrocatalytic OWS, a current density of 10 mA/cm2 can be obtained by using a cell voltage of 1.446 V. Theoretical studies demonstrated that the inclusion of Ru, N, and S triggers a change in the composition of MoO2; produces oxygen vacancies; and forms Ru, N, and S-oxygen-Mo catalytic centers. The combination of Ru, N, and S nanoclusters; Ru, N, and S-oxygen-Mo catalytic centers; and OVs-enriched MoO2 would position it among the top electrocatalysts.

Half-metallization Atom-Fingerprints Achieved at Ultrafast Oxygen-Evaporated Pyrochlores for Acidic Water Oxidation

The stability and catalytic activity of acidic oxygen evolution reaction (OER) are strongly determined by the coordination states and spatial symmetry among metal sites at catalysts. Herein, an ultrafast oxygen evaporation technology to rapidly soften the intrinsic covalent bonds using ultrahigh electrical pulses is suggested, in which prospective charged excited states at this extreme avalanche condition can generate a strong electron-phonon coupling to rapidly evaporate some coordinated oxygen (O) atoms, finally leading to a controllable half-metallization feature. Simultaneously, the relative metal (M) site arrays can be orderly locked to delineate some intriguing atom-fingerprints at pyrochlore catalysts, where the coexistence of metallic bonds (M─M) and covalent bonds (M─O) at this symmetry-breaking configuration can partially restrain crystal field effect to generate a particular high-spin occupied state. This half-metallization catalyst can effectively optimize the spin-related reaction kinetics in acidic OER, giving rise to 10.3 times (at 188 mV overpotential) reactive activity than pristine pyrochlores. This work provides a new understanding of half-metallization atom-fingerprints at catalyst surfaces to accelerate acidic water oxidation.

Amorphous MnRuOx Containing Microcrystalline for Enhanced Acidic Oxygen-Evolution Activity and Stability

Compared to Ir, Ru-based catalysts often exhibited higher activity but suffered significant and rapid activity loss during the challenging oxygen evolution reaction (OER) in a corrosive acidic environment. Herein, we developed a hybrid MnRuOx catalyst in which the RuO2 microcrystalline regions serve as a supporting framework, and the amorphous MnRuOx phase fills the microcrystalline interstices. In particular, the MnRuOx-300 catalyst from an annealing temperature of 300 °C contains an optimal amorphous/crystalline heterostructure, providing substantial defects and active sites, facilitating efficient adsorption and conversion of OH-. In addition, the heterostructure leads to a relative increase of the d-band center close to the Fermin level, thus accelerating electron transfer with reduced charge transfer resistance at the active interface between crystalline and amorphous phases during the OER. The catalyst was further thoroughly evaluated under various operating conditions and demonstrated exceptional activity and stability for the OER, representing a promising solution to replace Ir in water electrolyzers.

Advances in Noble Metal Electrocatalysts for Acidic Oxygen Evolution Reaction: Construction of Under-Coordinated Active Sites

Renewable energy-driven proton exchange membrane water electrolyzer (PEMWE) attracts widespread attention as a zero-emission and sustainable technology. Oxygen evolution reaction (OER) catalysts with sluggish OER kinetics and rapid deactivation are major obstacles to the widespread commercialization of PEMWE. To date, although various advanced electrocatalysts have been reported to enhance acidic OER performance, Ru/Ir-based nanomaterials remain the most promising catalysts for PEMWE applications. Therefore, there is an urgent need to develop efficient, stable, and cost-effective Ru/Ir catalysts. Since the structure-performance relationship is one of the most important tools for studying the reaction mechanism and constructing the optimal catalytic system. In this review, the recent research progress from the construction of unsaturated sites to gain a deeper understanding of the reaction and deactivation mechanism of catalysts is summarized. First, a general understanding of OER reaction mechanism, catalyst dissolution mechanism, and active site structure is provided. Then, advances in the design and synthesis of advanced acidic OER catalysts are reviewed in terms of the classification of unsaturated active site design, i.e., alloy, core-shell, single-atom, and framework structures. Finally, challenges and perspectives are presented for the future development of OER catalysts and renewable energy technologies for hydrogen production.

γ-MnO2 as an Electron Reservoir for RuO2 Oxygen Evolution Catalyst in Acidic Media

Developing highly active and durable catalysts in acid conditions remains an urgent issue due to the sluggish kinetics of oxygen evolution reaction (OER). Although RuO2 has been a state-of-the-art commercial catalyst for OER, it encounters poor stability and high cost. In this study, the electronic reservoir regulation strategy is proposed to promote the performance of acidic water oxidation via constructing a RuO2/MnO2 heterostructure supported on carbon cloth (CC) (abbreviated as RuO2/MnO2/CC). Theoretical and experimental results reveal that MnO2 acts as an electron reservoir for RuO2. It facilitates electron transfer from RuO2, enhancing its activity prior to OER, and donates electrons to RuO2, improving its stability after OER. Consequently, RuO2/MnO2/CC exhibits better performance compared to commercial RuO2, with an ultrasmall overpotential of 189 mV at 10 mA cm-2 and no signs of deactivation even after 800 h of electrolysis in 0.5 m H2SO4 at 10 mA cm-2. When applied as the anode in a proton exchange membrane water electrolyzer, the cost-efficient RuO2/MnO2/CC catalyst only requires a cell voltage of 1.661 V to achieve the water-splitting current of 1 A cm-2, and the noble metal cost is as low as US$ 0.00962 cm-2, indicating potential for practical applications.

Lanthanide-regulating Ru-O covalency optimizes acidic oxygen evolution electrocatalysis

Precisely modulating the Ru-O covalency in RuOx for enhanced stability in proton exchange membrane water electrolysis is highly desired. However, transition metals with d-valence electrons, which were doped into or alloyed with RuOx, are inherently susceptible to the influence of coordination environment, making it challenging to modulate the Ru-O covalency in a precise and continuous manner. Here, we first deduce that the introduction of lanthanide with gradually changing electronic configurations can continuously modulate the Ru-O covalency owing to the shielding effect of 5s/5p orbitals. Theoretical calculations confirm that the durability of Ln-RuOx following a volcanic trend as a function of Ru-O covalency. Among various Ln-RuOx, Er-RuOx is identified as the optimal catalyst and possesses a stability 35.5 times higher than that of RuO2. Particularly, the Er-RuOx-based device requires only 1.837 V to reach 3 A cm-2 and shows a long-term stability at 500 mA cm-2 for 100 h with a degradation rate of mere 37 μV h-1.

Designing 3d Transition Metal Cation-Doped MRuOx As Durable Acidic Oxygen Evolution Electrocatalysts for PEM Water Electrolyzers

The continuous dissolution and oxidation of active sites in Ru-based electrocatalysts have greatly hindered their practical application in proton exchange membrane water electrolyzers (PEMWE). In this work, we first used density functional theory (DFT) to calculate the dissolution energy of Ru in the 3d transition metal-doped MRuOx (M = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, and Zn) to evaluate their stability for acidic oxygen evolution reaction (OER) and screen out ZnRuOx as the best candidate. To confirm the theoretical predictions, we experimentally synthesized these MRuOx materials and found that ZnRuOx indeed displays robust acidic OER stability with a negligible decay of η10 after 15 000 CV cycles. Of importance, using ZnRuOx as the anode, the PEMWE can run stably for 120 h at 200 mA cm-2. We also further uncover the stability mechanism of ZnRuOx, i.e., Zn atoms doped in the outside of ZnRuOx nanocrystal would form a "Zn-rich" shell, which effectively shortened average Ru-O bond lengths in ZnRuOx to strengthen the Ru-O interaction and therefore boosted intrinsic stability of ZnRuOx in acidic OER. In short, this work not only provides a new study paradigm of using DFT calculations to guide the experimental synthesis but also offers a proof-of-concept with 3d metal dopants as RuO2 stabilizer as a universal principle to develop high-durability Ru-based catalysts for PEMWE.

Promotion of Acid-Water Oxidation by Lattice Distortion and Orbital Hybridization Induced by Ionic Dopant in Pyrochlore Y2Ru2O7

For acid-water oxidation, pyrochloric ruthenates are thought to be extremely effective electrocatalysts. In this work, through partial B-site replacement with larger M2+ cations, the electronic states of Y2Ru2O7 with strong electron correlations are reasonably managed, by which the inherent performance is tremendously promoted. Based on this, the improved Y2Ru1.9Sr0.1O7 electrocatalyst exhibits an outstanding durability and presents a highly inherent mass activity of 1915.1 A gRu-1 (at 1.53 V vs RHE). The enhanced oxygen-evolving reaction (OER) activity by ionic dopant in YRO pyrochlore can be attributed to two aspects, i.e., the lattice distortion induced inhibition of the grain coarsening, which results in a large surface area for YRO-M and increases the OER active sites, and the weakening of electron correlation via broadening of the Ru 4d bandwidths due to the increase of the average radius of B-site ions, which gives rise to an enhancement of conductivity and a strengthened hybridization between Ru 4d and O 2p orbitals and improves the reaction kinetics. The synergistic effects of lattice distortion and orbital hybridization promote the enhanced OER activity. The results would provide fresh concepts for the design of improved electrocatalysts and underscore the significance of managing the intrinsic performance through the dual modification of microstructure morphology and electronic structure.

Na Substitution Steering RuO6 Unit in Ruthenium Pyrochlores for Enhanced Oxygen Evolution in Acid

Although Ruthenium-based pyrochlore oxides can function as promising catalysts for acidic water oxidation, their limitations in terms of stability and activity still need to be addressed for further application in practical conditions. In this work, the possibility to enhance both oxygen evolution reaction activity and durability of Gd2Ru2O7- δ through partial replacement with Na+ in Gd3+ sites is first offered, leading to the electronic and geometric regulation of active center RuO6. Na+ triggers the emergence of Ru<4+ and the electron rearrangement of active-centered RuO6. Specifically, Ru ions with a negative d-band center after Na+ doping exhibit weaker adsorption energies of *O and result in the conversion of the rate-limiting step from *O/*OOH to *OH/O*, reducing energy barriers for boosting activities. Therefore, the NaxGd2- xRu2O7- δ requires a low overpotential of 260 mV at 10 mA cm-2 in 0.1 m HClO4 electrolyte. Moreover, the higher formation energy of Ru vacancy and less distorted RuO6 enable the as-prepared NaxGd2- xRu2O7- δ to operate steadily at 10 mA cm-2 for 300 h and multi-current chronopotentiometry with current densities from 20 to 100 mA cm-2 for 60 h in acidic proton exchange membrane electrolyzer, respectively.

Porous Tellurium-Doped Ruthenium Dioxide Nanotubes for Enhanced Acidic Water Oxidation

Electrocatalysts with high activity and durability for acidic oxygen evolution reaction (OER) play a crucial role in achieving cost-effective hydrogen production via proton exchange membrane water electrolysis. A novel electrocatalyst, Te-doped RuO2 (Te-RuO2) nanotubes, synthesized using a template-directed process, which significantly enhances the OER performance in acidic media is reported. The Te-RuO2 nanotubes exhibit remarkable OER activity in acidic media, requiring an overpotential of only 171 mV to achieve an anodic current density of 10 mA cm-2. Furthermore, they maintain stable chronopotentiometric performance under 10 mA cm-2 in acidic media for up to 50 h. Based on the experimental results and density functional calculations, this significant improvement in OER performance to the synergistic effect of large specific surface area and modulated electronic structure resulting from the doping of Te cations is attributed.

Locking the lattice oxygen in RuO2 to stabilize highly active Ru sites in acidic water oxidation

Ruthenium dioxide is presently the most active catalyst for the oxygen evolution reaction (OER) in acidic media but suffers from severe Ru dissolution resulting from the high covalency of Ru-O bonds triggering lattice oxygen oxidation. Here, we report an interstitial silicon-doping strategy to stabilize the highly active Ru sites of RuO2 while suppressing lattice oxygen oxidation. The representative Si-RuO2-0.1 catalyst exhibits high activity and stability in acid with a negligible degradation rate of ~52 μV h-1 in an 800 h test and an overpotential of 226 mV at 10 mA cm-2. Differential electrochemical mass spectrometry (DEMS) results demonstrate that the lattice oxygen oxidation pathway of the Si-RuO2-0.1 was suppressed by ∼95% compared to that of commercial RuO2, which is highly responsible for the extraordinary stability. This work supplied a unique mentality to guide future developments on Ru-based oxide catalysts' stability in an acidic environment.

Continuous strain tuning of oxygen evolution catalysts with anisotropic thermal expansion

Compressive strain, downshifting the d-band center of transition metal oxides, is an effective way to accelerate the sluggish kinetics of oxygen evolution reaction (OER) for water electrolysis. Here, we find that anisotropic thermal expansion can produce compressive strains of the IrO6 octahedron in Sr2IrO4 catalyst, thus downshifting its d-band center. Different from the previous strategies to create constant strains in the crystals, the thermal-triggered compressive strains can be real-timely tuned by varying temperature. As a result of the thermal strain accelerating OER kinetics, the Sr2IrO4 exhibits the nonlinear lnjo - T-1 (jo, exchange current density; T, absolute temperature) Arrhenius relationship, resulting from the thermally induced low-barrier electron transfer in the presence of thermal compressive strains. Our results verify that the thermal field can be utilized to manipulate the electronic states of Sr2IrO4 via thermal compressive strains downshifting the d-band center, significantly accelerating the OER kinetics, beyond the traditional thermal diffusion effects.

Strain-modulated Ru-O Covalency in Ru-Sn Oxide Enabling Efficient and Stable Water Oxidation in Acidic Solution

RuO2 is one of the benchmark electrocatalysts used as the anode material in proton exchange membrane water electrolyser. However, its long-term stability is compromised due to the participation of lattice oxygen and metal dissolution during oxygen evolution reaction (OER). In this work, weakened covalency of Ru-O bond was tailored by introducing tensile strain to RuO6 octahedrons in a binary Ru-Sn oxide matrix, prohibiting the participation of lattice oxygen and the dissolution of Ru, thereby significantly improving the long-term stability. Moreover, the tensile strain also optimized the adsorption energy of intermediates and boosted the OER activity. Remarkably, the RuSnOx electrocatalyst exhibited excellent OER activity in 0.1 M HClO4 and required merely 184 mV overpotential at a current density of 10 mA cm-2 . Moreover, it delivered a current density of 10 mA cm-2 for at least 150 h with negligible potential increase. This work exemplifies an effective strategy for engineering Ru-based catalysts with extraordinary performance toward water splitting.

Robust Crystal Phase Separation with Distinct Charge, Orbital, and Spin Orders in AgMn7O12

An AA'3B4O12-type A-site-ordered quadruple perovskite oxide AgMn7O12 was prepared by high-pressure and high-temperature methods. At room temperature, the compound crystallizes into a cubic Im3̅ symmetry with a charge distribution of AgMn33+Mn43.5+O12. With the temperature decreasing to TCO,OO ≈ 180 K, the compound undergoes a structural phase transition toward a monoclinic C2/m symmetry, giving rise to a B-site charge- and orbital-ordered AgMn33+Mn23+Mn24+O12 phase. Moreover, this charge-/orbital-ordered main phase coexists with the initial cubic AgMn33+Mn43.5+O12 phase in the wide temperature range we measured. The charge-/orbital-ordered phase shows two antiferromagnetic phase transitions near 125 and 90 K, respectively. Short-range ferromagnetic correlations are found to occur for the initial B-site mixed cubic phase around 35 K. Because of the robust phase separation, considerable magnetoresistance effects are observed below TCO,OO in AgMn7O12.

The Promising Seesaw Relationship Between Activity and Stability of Ru-Based Electrocatalysts for Acid Oxygen Evolution and Proton Exchange Membrane Water Electrolysis

The development of electrocatalysts that are not reliant on iridium for efficient acid-oxygen evolution is a critical step towards the proton exchange membrane water electrolysis (PEMWE) and green hydrogen industry. Ruthenium-based electrocatalysts have garnered widespread attention due to their remarkable catalytic activity and lower commercial price. However, the challenge lies in balancing the seesaw relationship between activity and stability of these electrocatalysts during the acid-oxygen evolution reaction (OER). This review delves into the progress made in Ru-based electrocatalysts with regards to acid OER and PEMWE applications. It highlights the significance of customizing the acidic OER mechanism of Ru-based electrocatalysts through the coordination of adsorption evolution mechanism (AEM) and lattice oxygen oxidation mechanism (LOM) to attain the ideal activity and stability relationship. The promising tradeoffs between the activity and stability of different Ru-based electrocatalysts, including Ru metals and alloys, Ru single-atomic materials, Ru oxides, and derived complexes, and Ru-based heterojunctions, as well as their applicability to PEMWE systems, are discussed in detail. Furthermore, this paper offers insights on in situ control of Ru active sites, dynamic catalytic mechanism, and commercial application of PEMWE. Based on three-way relationship between cost, activity, and stability, the perspectives and development are provided.

Breaking the Ru-O-Ru Symmetry of a RuO2 Catalyst for Sustainable Acidic Water Oxidation

Proton exchange membrane water electrolysis is a highly promising hydrogen production technique for sustainable energy supply, however, achieving a highly active and durable catalyst for acidic water oxidation still remains a formidable challenge. Herein, we propose a local microenvironment regulation strategy for precisely tuning In-RuO2 /graphene (In-RuO2 /G) catalyst with intrinsic electrochemical activity and stability to boost acidic water oxidation. The In-RuO2 /G displays robust acid oxygen evolution reaction performance with a mass activity of 671 A gcat -1 at 1.5 V, an overpotential of 187 mV at 10 mA cm-2 , and long-lasting stability of 350 h at 100 mA cm-2 , which arises from the asymmetric Ru-O-In local structure interactions. Further, it is unraveled theoretically that the asymmetric Ru-O-In structure breaks the thermodynamic activity limit of the traditional adsorption evolution mechanism which significantly weakens the formation energy barrier of OOH*, thus inducing a new rate-determining step of OH* absorption. Therefore, this strategy showcases the immense potential for constructing high-performance acidic catalysts for water electrolyzers.

Highly Active Pyrochlore-Type Praseodymium Ruthenate Electrocatalyst for Efficient Acid-Water Oxidation

To produce directly combustible hydrogen from water, highly active, acid-resistant, and economical catalysts for oxygen evolution reaction (OER) are needed. An electrocatalyst based on praseodymium ruthenate (Pr2Ru2O7) is presented here that greatly outperforms RuO2 for acid-water oxidation. Specifically, at 10 mA cm-2, this electrocatalyst presents a low overpotential (η) of 213 mV and markedly superior stability. Moreover, Pr2Ru2O7 presents a significant rise in turnover frequency (TOF) and a highly intrinsic mass activity of 1618.8 A gRu-1 (η = 300 mV), exceeding the most commonly reported acid OER catalysts. Density functional theory calculations and electronic structure study demonstrate that the Ru 4d-band center related to the longer Ru-O bond with a large radius of Pr ion in this pyrochlore is lower than that in RuO2, which would optimize the binding between the adsorbed oxygen species and catalytic metal sites and enhance the catalytic intrinsic activity.

Trace Lattice S Inserted RuO2 Flexible Nanosheets for Efficient and Long-Term Acidic Oxygen Evolution Catalysis

Pursuing highly active and long-term stable ruthenium (Ru) based oxygen evolution reaction (OER) catalyst for water electrolysis under acidic conditions is of great significance yet a tremendous challenge to date. To solve the problem of serious Ru corrosion in an acid medium, the trace lattice sulfur (S) inserted RuO2 catalyst is prepared. The optimized catalyst (Ru/S NSs-400) has shown a record stability of 600 h for the solely containing Ru (iridium-free) nanomaterials. In the practical proton exchange membrane device, the Ru/S NSs-400 can even sustain more than 300 h without obvious decay at the high current density of 250 mA cm-2 . The detailed investigations reveal that S doping not only changes the electronic structure of Ru via forming RuS coordination for high adsorption of reaction intermediates but also stabilizes Ru from over-oxidation. This strategy is also effective for improving the stability of commercial Ru/C and homemade Ru-based nanoparticles. This work offers a highly effective strategy to design high-performance OER catalysts for water splitting and beyond.

Spin-Polarization Strategy for Enhanced Acidic Oxygen Evolution Activity

Spin-polarization is known as a promising way to promote the anodic oxygen evolution reaction (OER), since the intermediates and products endow spin-dependent behaviors, yet it is rarely reported for ferromagnetic catalysts toward acidic OER practically used in industry. Herein, the first spin-polarization-mediated strategy is reported to create a net ferromagnetic moment in antiferromagnetic RuO2 via dilute manganese (Mn2+ ) (S = 5/2) doping for enhancing OER activity in acidic electrolyte. Element-selective X-ray magnetic circular dichroism reveals the ferromagnetic coupling between Mn and Ru ions, fulfilling the Goodenough-Kanamori rule. The ferromagnetism behavior at room temperature can be well interpreted by first principles calculations as the interaction between the Mn2+ impurity and Ru ions. Indeed, Mn-RuO2 nanoflakes exhibit a strongly magnetic field enhanced OER activity, with the lowest overpotential of 143 mV at 10 mA cmgeo -2 and negligible activity decay in 480 h stability (vs 200 mV/195 h without magnetic field) as known for magnetic effects in the literature. The intrinsic turnover frequency is also improved to reach 5.5 s-1 at 1.45 VRHE . This work highlights an important avenue of spin-engineering strategy for designing efficient acidic oxygen evolution catalysts.

Ruthenium-Manganese Solid Solution Oxide with Enhanced Performance for Acidic and Alkaline Oxygen Evolution Reaction

Proton exchange membrane water electrolysers and alkaline exchange membrane water electrolysers for hydrogen production suffer from sluggish kinetics and the limited durability of the electrocatalyst toward oxygen evolution reaction (OER). Herein, a rutile Ru0.75 Mn0.25 O2-δ solid solution oxide featured with a hierarchical porous structure has been developed as an efficient OER electrocatalyst in both acidic and alkaline electrolyte. Specifically, compared with commercial RuO2 , the catalyst displays a superior reaction kinetics with small Tafel slope of 54.6 mV dec-1 in 0.5 M H2 SO4 , thus allowing a low overpotential of 237 and 327 mV to achieve the current density of 10 and 100 mA cm-2 , respectively, which is attributed to the enhanced electrochemically active surface area from the porous structure and the increased intrinsic activity owing to the regulated Ru>4+ proportion with Mn incorporation. Additionally, the sacrificial dissolution of Mn relieves the leaching of active Ru species, leading to the extended OER durability. Besides, the Ru0.75 Mn0.25 O2-δ catalyst also shows a highly improved OER performance in alkaline electrolyte, rendering it a versatile catalyst for water splitting.

Arming Ru with Oxygen-Vacancy-Enriched RuO2 Sub-Nanometer Skin Activates Superior Bifunctionality for pH-Universal Overall Water Splitting

Water electrolysis has been expected to assimilate the renewable yet intermediate energy-derived electricity for green H₂ production. However, current benchmark anodic catalysts of Ir/Ru-based compounds suffer severely from poor dissolution resistance. Herein, an effective modification strategy is proposed by arming a sub-nanometer RuO₂ skin with abundant oxygen vacancies to the interconnected Ru clusters/carbon hybrid microsheet (denoted as Ru@V-RuO₂ /C HMS), which can not only inherit the high hydrogen evolution reaction (HER) activity of the Ru, but more importantly, activate the superior activity toward the oxygen evolution reaction (OER) in both acid and alkaline conditions. Outstandingly, it can achieve an ultralow overpotential of 176/201 mV for OER and 46/6 mV for the HER to reach 10 mA cm^-2 in acidic and alkaline solution, respectively. Inspiringly, the overall water splitting can be driven with an ultrasmall cell voltage of 1.467/1.437 V for 10 mA cm^-2 in 0.5 m H₂ SO₄ /1.0 m KOH, respectively. Density functional theory calculations reveal that armoring the oxygen-vacancy-enriched RuO₂ exoskeleton can cooperatively alter the interfacial electronic structure and make the adsorption behavior of hydrogen and oxygen intermediates much close to the ideal level, thus simultaneously speeding up the hydrogen evolution kinetics and decreasing the energy barrier of oxygen release.

Electrocatalysts for the Oxygen Evolution Reaction in Acidic Media

The well-established proton exchange membrane (PEM)-based water electrolysis, which operates under acidic conditions, possesses many advantages compared to alkaline water electrolysis, such as compact design, higher voltage efficiency, and higher gas purity. However, PEM-based water electrolysis is hampered by the low efficiency, instability, and high cost of anodic electrocatalysts for the oxygen evolution reaction (OER). In this review, the recently reported acidic OER electrocatalysts are comprehensively summarized, classified, and discussed. The related fundamental studies on OER mechanisms and the relationship between activity and stability are particularly highlighted in order to provide an atomistic-level understanding for OER catalysis. A stability test protocol is suggested to evaluate the intrinsic activity degradation. Some current challenges and unresolved questions, such as the usage of carbon-based materials and the differences between the electrocatalyst performances in acidic electrolytes and PEM-based electrolyzers are also discussed. Finally, suggestions for the most promising electrocatalysts and a perspective for future research are outlined. This review presents a fresh impetus and guideline to the rational design and synthesis of high-performance acidic OER electrocatalysts for PEM-based water electrolysis.

Active and durable R2MnRuO7 pyrochlores with low Ru content for acidic oxygen evolution

The production of green hydrogen in water electrolyzers is limited by the oxygen evolution reaction (OER). State-of-the-art electrocatalysts are based on Ir. Ru electrocatalysts are a suitable alternative provided their performance is improved. Here we show that low-Ru-content pyrochlores (R₂MnRuO₇, R = Y, Tb and Dy) display high activity and durability for the OER in acidic media. Y₂MnRuO₇ is the most stable catalyst, displaying 1.5 V at 10 mA cm^-2 for 40 h, or 5000 cycles up to 1.7 V. Computational and experimental results show that the high performance is owed to Ru sites embedded in RuMnO_x surface layers. A water electrolyser with Y₂MnRuO₇ (with only 0.2 mg_Ru cm^-2) reaches 1 A cm^-2 at 1.75 V, remaining stable at 200 mA cm^-2 for more than 24 h. These results encourage further investigation on Ru catalysts in which a partial replacement of Ru by inexpensive cations can enhance the OER performance.

Iron-Doped Monoclinic Strontium Iridate as a Highly Efficient Oxygen Evolution Electrocatalyst in Acidic Media

Ir-based perovskite oxides are efficient electrocatalysts for anodic oxygen evolution. This work presents a systematic study of the doping effects of Fe on the OER activity of monoclinic SrIrO₃ to reduce the consumption of Ir. The monoclinic structure of SrIrO₃ was retained when the Fe/Ir ratio was less than 0.1/0.9. Upon further increases in the Fe/Ir ratio, the structure of SrIrO₃ changed from a 6H to 3C phase. The SrFe_0.1Ir_0.9O₃ had the highest activity among the investigated catalysts with the lowest overpotential of 238 mV at 10 mA cm^-2 in 0.1 M HClO₄ solution, which could be attributed to the oxygen vacancies induced by the Fe dopant and the IrOx formed upon the dissolution of Sr and Fe. The formation of oxygen vacancies and uncoordinated sites at the molecular level may be responsible for the improved performance. This work explored the effect of Fe dopants in boosting the OER activity of SrIrO₃, thus providing a detailed reference to tune perovskite-based electrocatalyst by Fe for other applications.

Customized reaction route for ruthenium oxide towards stabilized water oxidation in high-performance PEM electrolyzers

The poor stability of Ru-based acidic oxygen evolution (OER) electrocatalysts has greatly hampered their application in polymer electrolyte membrane electrolyzers (PEMWEs). Traditional understanding of performance degradation centered on influence of bias fails in describing the stability trend, calling for deep dive into the essential origin of inactivation. Here we uncover the decisive role of reaction route (including catalytic mechanism and intermediates binding strength) on operational stability of Ru-based catalysts. Using MRuO_x (M = Ce⁴⁺, Sn⁴⁺, Ru⁴⁺, Cr⁴⁺) solid solution as structure model, we find the reaction route, thereby stability, can be customized by controlling the Ru charge. The screened SnRuO_x thus exhibits orders of magnitude lifespan extension. A scalable PEMWE single cell using SnRuO_x anode conveys an ever-smallest degradation rate of 53 μV h^-1 during a 1300 h operation at 1 A cm^-2.

Electronic Structure Modulation Induced by Cobalt-doping and Lattice-Contracting on Armor-Like Ruthenium Oxide Drives pH-Universal Oxygen Evolution

Exquisite design of RuO₂ -based catalysts to simultaneously improve activity and stability under harsh conditions and reduce the Ru dosage is crucial for advancing energy conversion involving oxygen evolution reaction (OER). Herein, a distinctive cobalt-doped RuO_x framework is constructed on Co₃ O₄ nanocones (Co₃ O₄ @CoRuO_x ) as a promising strategy to realize above urgent desires. Extensive experimental characterization and theoretical analysis demonstrate that cobalt doped in RuO_x lattice brings the oxygen vacancies and lattice contraction, which jointly redistribute the electron configuration of RuO_x . The optimized d-band center balances the adsorption energies of oxygenated intermediates, lowing the thermodynamical barrier of the rate-determining step; and meanwhile, the over-oxidation and dissolution of Ru species are restrained because of the p-band down-shifting of the lattice oxygen. Co₃ O₄ @CoRuO_x with 3.7 wt.% Ru delivers the extremely low OER overpotentials at 10 mA cm^-2 in alkaline (167 mV), neutral (229 mV), and acidic electrolytes (161 mV), and super operating stability over dozens of hours. The unprecedented activity ranks first in all pH-universal OER catalysts reported so far. These findings provide a route to produce robust low-loading Ru catalysts and an engineering approach for regulating the central active metal through synergy of co-existing defects to improve the catalytic performance and stability.

Simultaneously Constructing Active Sites and Regulating Mn-O Strength of Ru-Substituted Perovskite for Efficient Oxidation and Hydrolysis Oxidation of Chlorobenzene

Chlorinated volatile organic compounds (CVOCs) are a class of hazardous pollutants that severely threaten environmental safety and human health. Although the catalytic oxidation technique for CVOCs elimination is effective, enhancing the catalytic efficiency and simultaneously inhibiting the production of organic byproducts is still of great challenge. Herein, Ru-substituted LaMn(Ru)O_{3+ δ} perovskite with Ru-O-Mn structure and weakened Mn-O bond strength has been developed for catalytic oxidation of chlorobenzene (CB). The formed Ru-O-Mn structure serves as favorable sites for CB adsorption and activation, while the weakening of Mn-O bond strength facilitates the formation of active oxygen species and improves oxygen mobility and catalyst reducibility. Therefore, LaMn(Ru)O_{3+ δ} exhibits superior low-temperature activity with the temperature of 90% CB conversion decreasing by over 90 °C compared with pristine perovskite, and the deep oxidation of chlorinated byproducts produced in low temperature is also accelerated. Furthermore, the introduction of water vapor into reaction system triggers the process of hydrolysis oxidation that promotes CB destruction and inhibits the generation of chlorinated byproducts, due to the higher-activity *OOH species generated from the dissociated H₂ O reacting with adsorbed oxygen. This work can provide a unique, high-efficiency, and facile strategy for CVOCs degradation and environmental improvement.

Oxygen Evolution Electrocatalysts for the Proton Exchange Membrane Electrolyzer: Challenges on Stability

Hydrogen generated by proton exchange membrane (PEM) electrolyzer holds a promising potential to complement the traditional energy structure and achieve the global target of carbon neutrality for its efficient, clean, and sustainable nature. The acidic oxygen evolution reaction (OER), owing to its sluggish kinetic process, remains a bottleneck that dominates the efficiency of overall water splitting. Over the past few decades, tremendous efforts have been devoted to exploring OER activity, whereas most show unsatisfying stability to meet the demand for industrial application of PEM electrolyzer. In this review, systematic considerations of the origin and strategies based on OER stability challenges are focused on. Intrinsic deactivation of the material and the extrinsic balance of plant-induced destabilization are summarized. Accordingly, rational strategies for catalyst design including doping and leaching, support effect, coordination effect, strain engineering, phase and facet engineering are discussed for their contribution to the promoted OER stability. Moreover, advanced in situ/operando characterization techniques are put forward to shed light on the OER pathways as well as the structural evolution of the OER catalyst, giving insight into the deactivation mechanisms. Finally, outlooks toward future efforts on the development of long-term and practical electrocatalysts for the PEM electrolyzer are provided.

Crystal Structure and Electrical Properties of Ruthenium-Substituted Calcium Copper Titanate

This paper reports a detailed study of crystal structure and dielectric properties of ruthenium-substituted calcium-copper titanates (CaCu₃Ti_4-xRu_xO₁₂, CCTRO). A series of three samples with different stoichiometry was prepared: CaCu₃Ti_4-xRu_xO₁₂, x = 0, 1 and 4, abbreviated as CCTO, CCT3RO and CCRO, respectively. A detailed structural analysis of CCTRO samples was done by the Rietveld refinement of XRPD data. The results show that, regardless of whether Ti⁴⁺ or Ru⁴⁺ ions are placed in B crystallographic position in AA'₃B₄O₁₂ (CaCu₃Ti_4-xRu_xO₁₂) unit cell, the crystal structure remains cubic with Im3¯ symmetry. Slight increases in the unit cell parameters, cell volume and interatomic distances indicate that Ru⁴⁺ ions with larger ionic radii (0.62 Å) than Ti⁴⁺ (0.605 Å) are incorporated in the CaCu₃Ti_4-xRu_xO₁₂ crystal lattice. The structural investigations were confirmed using TEM, HRTEM and ADF/STEM analyses, including EDXS elemental mapping. The effect of Ru atoms share in CaCu₃Ti_4-xRu_xO₁₂ samples on their electrical properties was determined by impedance and dielectric measurements. Results of dielectric measurements indicate that one atom of ruthenium per CaCu₃Ti_4-xRu_xO₁₂ unit cell transforms dielectric CCTO into conductive CCT3RO while preserving cubic crystal structure. Our findings about CCTO and CCT3RO ceramics promote them as ideal tandem to overcome the problem of stress on dielectric-electrode interfaces in capacitors.

High-Performance RuOx Catalyst with Advanced Mesoporous Structure for Oxygen Evolution Reaction

Polymer electrolyte membrane water electrolysis (PEMWE) is regarded as one of the most important cornerstone technologies in the upcoming hydrogen society. However, one of the major problems it encounters is its slow oxygen evolution kinetics, which necessitates the use of large amounts of precious metal catalysts to ensure a satisfactory reaction rate. Herein, we have prepared a series of RuO_x with porous structures and ultrahigh Ru utilization toward the oxygen evolution reaction. All porous samples exhibit an enhanced catalytic performance compared with commercial RuO_x. Particularly, for the RuO_x-350 sample, the overpotential to reach 10 mA cm^-2 is as low as 225 mV. It has obvious advantages among all reported pure RuO₂-based catalysts. Here, a new strategy was raised to construct efficient RuO₂ electrocatalysts with outstanding activity and stability for water electrolysis technology.

Interface engineering breaks both stability and activity limits of RuO2 for sustainable water oxidation

Designing catalytic materials with enhanced stability and activity is crucial for sustainable electrochemical energy technologies. RuO2 is the most active material for oxygen evolution reaction (OER) in electrolysers aiming at producing 'green' hydrogen, however it encounters critical electrochemical oxidation and dissolution issues during reaction. It remains a grand challenge to achieve stable and active RuO2 electrocatalyst as the current strategies usually enhance one of the two properties at the expense of the other. Here, we report breaking the stability and activity limits of RuO2 in neutral and alkaline environments by constructing a RuO2/CoOx interface. We demonstrate that RuO2 can be greatly stabilized on the CoOx substrate to exceed the Pourbaix stability limit of bulk RuO2. This is realized by the preferential oxidation of CoOx during OER and the electron gain of RuO2 through the interface. Besides, a highly active Ru/Co dual-atom site can be generated around the RuO2/CoOx interface to synergistically adsorb the oxygen intermediates, leading to a favourable reaction path. The as-designed RuO2/CoOx catalyst provides an avenue to achieve stable and active materials for sustainable electrochemical energy technologies.