Fine-tuned local coordination environment of Pt single atoms on ceria controls catalytic reactivity

Blocking the Operando Formation of Single-Atom Spectators by Interfacial Engineering

Aside from activity and selectivity, catalyst stability is a key focus in heterogeneous catalysis research. Although sintering of metal species has been considered the primary cause for deactivation of metal catalysts, our study reveals that the loss of activity at low reaction temperatures in the CeO2-supported Pt (Pt/CeO2) catalyst in complete propane oxidation is due to the dispersion of Pt ensemble sites (nanoclusters) and their subsequent operando conversion into Pt single atoms under reaction conditions. These Pt single-atom species exhibit low reactivity and act as spectators in the low-temperature reaction region. To address this issue, we engineered the surface of CeO2 by introducing NbOx, which does not directly interact with Pt. Instead, NbOx blocks the strong binding sites for Pt on CeO2, thereby preventing Pt redispersion/fragmentation and preserving reactive Pt ensembles. This strategy led to a remarkable 37-fold increase in the reaction rate compared to the Pt/CeO2 catalyst. Our findings emphasize the importance of suppressing the formation of noble metal single-atom spectators through innovative surface engineering strategy. These mechanistic insights not only advance the understanding of the materials science of Pt/CeO2 but also extend to critical technological fields such as energy conversion systems and environmental remediation technologies.

Unlocking single-atom induced electronic metal-support interactions in electrocatalytic one-electron water oxidation for wastewater purification

Electro-oxidation is a promising green technology for decentralized wastewater purification. However, its efficacy is primarily constrained by the selectivity and efficiency of hydroxyl radical (•OH) generation through one-electron water oxidation. In this study, we elucidate the mechanism of electronic metal-support interactions (EMSI) of Ni single-atoms on antimony-doped tin oxide anode (Ni/ATO) to enhance •OH production and overall water treatment efficiency. We experimentally and theoretically investigate both the structural evolution process and micro-interface mechanisms associated with the EMSI effects induced by Ni single-atoms. The optimized electronic structures in the interfacial catalysts under EMSI conditions and the co-catalytic role of Ni single-atoms synergistically facilitate selective and efficient •OH generation, resulting in over a fivefold increase in its steady-state concentration and tenfold enhancement in pseudo-first-order rate constant of sulfamethoxazole degradation compared to those on bare ATO. With the EMSI, rapid electron transfer channels were established for a marked enhancement in the adsorption, conversion, and dissociation of interfacial H2O molecules. Notably, it is revealed that Ni single-atoms serve as co-catalytic sites, exhibiting a "H-pulling effect" that is crucial for •OH generation. The Ni/ATO anode demonstrates great efficiency in degrading various refractory organic pollutants, and effectively treats real pharmaceutical wastewater with low energy consumption. Furthermore, it presents remarkable stability and adaptability, while maintaining a minimal environmental footprint during wastewater treatment processes. This work addresses the theoretical gaps between EMSI effects and co-catalysis in electro-oxidation systems, while providing a robust technological solution for wastewater purification.

Formation of hydrided Pt-Ce-H sites in efficient, selective oxidation catalysts

Single-atom site catalysts can improve the rates and selectivity of many catalytic reactions. We have modified Pt1/CeO2 single sites by combining them with molecular groups and with oxygen vacancies of the support. The new sites include hydrided (Pt2+-Ce3+Hδ-) and hydroxylated (Pt2+-Ce3+OH) sites that exhibit higher reactivity and selectivity to previous single sites for several reactions, including a ninefold increase in the reaction rate for carbon monoxide oxidation and a 2.3-fold improvement of propylene selectivity for oxidative dehydrogenation of propane. The atomic structure and reaction steps of these sites were determined with in situ and ex situ spectroscopy techniques and theoretical methods.

Short-Path Hydrogen Spillover on CeO2-Supported PtPd Nanoclusters for Efficient Hydrogen Evolution in Acidic Media

Hydrogen spillover in supported metal electrocatalysts has garnered significant research attention for its potential to enhance the hydrogen evolution reaction (HER) efficiency. However, challenges remain in facilitating hydrogen spillover and reducing the associated energy barriers. Herein, PtPd alloy clusters are anchored to the CeO2 surface, enabling short-path hydrogen spillover and lowering the reaction energy barrier in acidic environments. During HER, hydrogen is initially adsorbed on the noble metal surface and subsequently migrates to the interface, rather than precipitating directly on the CeO2 surface. This interface exhibits a near-zero Gibbs free energy of hydrogen adsorption (0.023 eV). Consequently, the catalyst demonstrates an exceptionally low overpotential of only 5.7 mV at 10 mA cm-2 in acidic media, along with remarkable long-term stability. These findings provide valuable insights into designing highly efficient HER electrocatalysts for acidic environments based on hydrogen spillover mechanisms.

Single-atom Pd1O4Ce2/CeO2 catalyst with unique local fields for methane-catalyzed combustion

Modifying the local fields of active metals can directly and effectively optimize the catalytic performance in the heterogeneous catalytic process. Here, the local fields of single-atom Pd in the Pd1/CeO2 catalyst were tailored by using a self-sacrificial electron-rich carbon nitride to obtain the Pd1O4Ce2/CeO2 with coordination unsaturated single-atom Pd. Compared with Pd1O4Ce3/CeO2 with coordination saturated single-atom Pd, the Pd1O4Ce2/CeO2 catalyst showed enhanced activity for CH4 combustion with decreased 118 °C of T50 and 8 times higher in turnover frequency (TOF) at 400 °C. The thermal decomposition of carbon nitride pre-coordinated Pd created a unique atmosphere around Pd species, leading to the formation of coordination unsaturated single-atom Pd on the surface of CeO2. This coordination unsaturated single-atom Pd catalyst conduced to the polarization of CH4 and reduced the cleavage energy barrier of CH4, thus accelerating the catalytic activity. The construction method of this coordination unsaturated structure provides insights for the designing and synthesizing of highly active single atom catalysts.

Oxide Support Inert in Its Interaction with Metal but Active in Its Interaction with Oxide and Vice Versa

Supported metal or oxide nanostructures catalyze many industrial reactions, where the interaction of metal or oxide overlayer with its support can have a substantial influence on catalytic performance. In this work, we show that small Pt species can be well stabilized on CeO2 under both H2-containing and O2-containing atmospheres but sintering happens on SiO2, indicating that CeO2 is active whereas SiO2 is inert in Pt-support interaction. On the other hand, Co oxide (CoOx) supported on SiO2 can maintain a low-valence Co2+ state both in air and during CO2 hydrogenation to CO, indicating a strong interaction of CoOx with SiO2. However, the CoOx overlayer has a weak interaction with CeO2 and is easily reduced to metallic Co during the CO2 hydrogenation reaction producing CH4. Thus, SiO2 is active, but CeO2 is inert for CoOx-support interaction, which is counter to the common sense from the Pt/oxide systems. Systematic studies in stability behaviors of Pt and CoOx nanocatalysts supported on various oxides show that the reducibility of the oxide supports can be used to describe the catalyst-support interaction. Oxide supports with high reducibility or low metal-oxygen bond strength interact strongly with Pt and other metals, showing high metalphilicity. Conversely, oxide supports with low reducibility or high metal-oxygen bond strength have strong interaction with CoOx and other oxides, having high oxidephilicity.

Regulating the Electronic Metal-Support Interaction of Single-Atom Ruthenium Catalysts for Boosting Chlorobenzene Oxidation

Developing highly active single-atom catalysts (SACs) with excellent chlorine resistance for efficient oxidation of harmful chlorinated volatile organic compounds (CVOCs) is a great challenge. Tuning the electronic metal-support interaction (EMSI) is viable for promoting catalytic performances of SACs. Herein, an effective strategy of modulating the EMSI in Ru1/CeO2 SACs by thermal treatment control is proposed, which distinctly enhances the activities of the catalyst for chlorobenzene (CB) oxidation and chlorine conversion, accomplishing total CB degradation at nearly 260 °C. Detailed characterization and theoretical calculations reveal that the EMSI induces electron transfer from Ru to CeO2, optimizing the coordination and electronic structure of single-atom Ru and accordingly facilitating the adsorption and activation of CB. Moreover, the surface lattice oxygen (Olatt) at the Ru-O-Ce interface is demonstrated as the critical reactive oxygen species, the mobility and reactivity of which are also prompted by the EMSI, leading to the boosted conversion of reaction intermediates. This work sheds light on the effect of EMSI regulation on CVOC catalytic oxidation and provides guidance on fabricating high-efficiency SACs for environmental catalysis.

Revealing the structure-activity relationship of Pt1/CeO2 with 17O solid-state NMR spectroscopy and DFT calculations

Single-atom catalysts (SACs) have attracted significant interest due to their exceptional and tunable performance, enabled by diverse coordination environments achieved through innovative synthetic strategies. However, various local structures of active sites pose significant challenges for precise characterization, a prerequisite for developing structure-activity relationships. Here, we combine 17O solid-state NMR spectroscopy and DFT calculations to elucidate the detailed structural information of Pt/CeO2 SACs and their catalytic behaviors. The NMR data reveal that single Pt atoms, dispersed from clusters with water vapor, exhibit a square planar geometry embedded in CeO2 (111) surface, distinct from the original clusters and other conventionally generated Pt single atoms. The square planar Pt/CeO2 SAC demonstrates improved CO oxidation performance compared to Pt/CeO2 SAC with octahedral coordination, due to moderately strong CO adsorption and low energy barriers. This approach can be extended to other oxide-supported SACs, enabling spatially resolved characterization and offering comprehensive insights into their structure-activity relationships.

Controlling Reaction Pathways of Ethylene Hydroformylation Using Isolated Bimetallic Rhodium-Cobalt Sites

Designing efficient ligand-free heterogeneous catalysts for ethylene hydroformylation to produce C3 oxygenates is of importance for both fundamental research and practical applications, but it is often hindered by insufficient catalytic activity and selectivity. This work designs isolated rhodium-cobalt (Rh-Co) sites confined within a ZSM-5 zeolite to enhance ethylene hydroformylation rates and selectivity while maintaining catalyst stability. By adjusting the Co/Al ratio in Co-ZSM-5, different sizes of Co are formed; subsequent Rh introduction produces isolated Rh1Cox clusters with different Rh-Co coordination numbers (CNs). In-situ characterizations and density functional theory calculations reveal that a Rh-Co CN of 3, corresponding to an isolated Rh1Co3 site, provides optimal bindings to reaction intermediates and thus achieves the highest hydroformylation rates among supported Rh-based catalysts. This study demonstrates the role of coordination-tuning via a secondary metal in effectively controlling the reaction pathway over single Rh atom catalysts.

Identifying N Coordination Types of Single-Atom Catalysts by Spin-Modulated Luminol Cathodic Electrochemiluminescence

The type of coordinated N atoms in the metal-N coordination structure is of paramount importance to the catalytic property of N-modified carbon-based single-atom catalysts (SACs). Extended X-ray absorption fine structure (EXAFS) spectroscopy is a powerful tool for analyzing the coordination environments of SACs. Despite its efficacy, the limited availability of synchrotron light sources and the complexity of data analysis have constrained its broader application in identifying metal-N coordination types within SACs. In this work, two kind of CoN4 SACs, were prepared by varying the N source. Then their electrochemiluminescence (ECL) behavior in the luminol/dissolved oxygen system during cathodic scanning were investigated. In comparison to CoN4(pyridinic N), for which the spin density displays dz2 orbital characteristics, CoN4(pyrrolic N) exhibits dxz orbital features, which was more conducive to the subsequent cleavage of the O-O bond in O2⋅- to ⋅OH, resulting in the generation of more active intermediates *OH and the promotion of cathodic ECL emission. This work demonstrates that the ECL technique provides a novel method for the rapid identification of Co-N coordination types and the spin nature of the metal center in CoN4 SACs.

Crystallinity of Cerium Oxide Dictates Reactivity of Platinum Catalysts

The reactivity of supported metal catalysts can be influenced by the nature of supports, which synergistically activate reactant molecules with metal sites. The investigation of the crystalline effect of CeO2 remains unclear because of the easy formation of fluorite-structure CeO2. Here, we successfully synthesized CeOx clusters with distinct crystallinity and established that the crystalline nature of CeOx clusters dictates the reactivity of the Pt/CeOx catalysts for CO oxidation. Specifically, Pt clusters supported on crystalline CeOx exhibited a specific CO conversion rate approximately 15-fold higher than those on amorphous CeOx at temperatures of 120 to 140 °C. Detailed experimental investigations and simulations revealed that the enhanced CO oxidation reactivity originates from the higher mobility of lattice oxygen and more labile oxygen species on crystalline CeOx nanoclusters. This work deepens our understanding of crystallinity-dependent redox properties of nanoscale oxide supports and opens new routes for designing better metal catalysts for targeted reactions.

Asymmetric Pt1O4-Ov Dual Active Sites Induced by NbOx Clusters Promotes CO Synergistical Oxidation

Pt/CeO2 single-atom catalysts are attractive materials for CO oxidation but normally show poor activity below 150 °C mainly due to the unicity of the originally symmetric Pt1O4 structure. In this work, a highly active and stable Pt1/CeO2 single-site catalyst with only 0.1 wt % Pt loading, achieving a satisfied complete conversion of CO at 150 °C, can be obtained through fabricating asymmetric Pt1O4-oxygen vacancies (Ov) dual-active sites induced by well-dispersed NbOx clusters. Specifically, the formation of new Ce-O-Nb interactions weakened the strength of the original Pt-O-Ce bond, thus transferring the originally near-perfect square-planar Pt1O4 into the distorted square-planar one, along with forming abundant Ov around the Pt site. Hence, the promoted CO activation on the asymmetric Pt1O4 structure and the facilitated dissociation of the O2 on the neighboring Ov site synergistically improved the CO catalytic oxidation performance. The fabrication of such asymmetric Pt1O4-Ov double-active sites was also active for the oxidation of other typical hydrocarbons pollutants such as C7H8 and C3H6 from exhaust gases, shedding light on engineering high-efficiency Pt-based oxidation catalysts for low-temperature environmental catalysis.

Ohmic Contact Heterostructures Immobilized Pt Single Atoms for Boosting Alkaline Hydrogen Evolution Reaction

Pt single-atoms catalysts have been widely confirmed as ideal electrocatalysts for high-efficiency hydrogen evolution reaction (HER), but their activity and durability at high current density remain great challenges, especially in alkaline media. Herein, a unique Ohmic contact heterostructure is fabricated by integrating Ni and NiO to immobilize Pt single-atoms (Ni-NiO-Pt) via Pt-O4 coordination for boosting the alkaline HER. Owing to transient high temperature and pressure in the laser ablation process, Ohmic contact heterojunctions are constructed at the interfaces between metal Ni core and nanoporous semiconducting NiO shell with adequate oxygen vacancies. The large work function difference triggers the electron transfer from Ni to Pt-decorated NiO, which dramatically eliminates the electron conduction impedance and regulates the charge redistribution. Density functional theory calculation unveils that the multiple regulations of energy barrier and charge redistribution on Ohmic contact endow Ni-NiO-Pt with outstanding electrical conductivity and favorable hydrogen binding energy. Consequently, Ni-NiO-Pt displays superior alkaline HER performances with an overpotential of 23.54 mV at 10 mA cm-2 and protruding durability for 75 h at 500 mA cm-2, drastically outperforming commercial Pt/C and most reported HER electrocatalysts. The immobilization of Pt single-atoms on Ohmic contact opens up an avenue toward the rational design of high-efficiency electrocatalysts.

Striking Improvement of N2 Selectivity in NH3 Oxidation Reaction on Fe2O3-Based Catalysts via SiO2 Doping

The emission of NH3 has been reported to pose a serious threat to both human health and the environment. To efficiently eliminate NH3, catalysts for the selective catalytic oxidation of NH3 (NH3-SCO) have been intensively studied. Fe2O3-based catalysts were found to exhibit superior NH3 oxidation activity; however, the low N2 selectivity made it less attractive in practical applications. In this work, aimed at improving the N2 selectivity on Fe2O3-based catalysts, a simple SiO2 doping strategy was proposed. Although the NH3 oxidation activity showed almost no change on Fe2O3 after SiO2 doping, the N2 selectivity was significantly improved. Systematic characterizations revealed that SiO2 doping could increase the specific surface area of Fe2O3, and a strong interaction of Fe-O-Si was formed in Fe2O3-SiO2 mixed oxide catalysts. Furthermore, abundant Brønsted acid sites were formed on Fe2O3-SiO2 catalysts due to the facile hydrolysis of the Fe-O-Si structure into Si-OH and Fe-OH. Although SiO2 doping was found to weaken the redox ability of Fe2O3, the abundant Brønsted acid sites on Fe2O3-SiO2 catalysts could facilitate NH3 oxidation reaction through an internal SCR (i-SCR) pathway, thus achieving superior N2 selectivity. This work can provide new insights into constructing efficient NH3-SCO catalysts with high N2 selectivity.

Polyoxometalates-Mediated Selectivity in Pt Single-Atoms on Ceria for Environmental Catalysis

Optimizing the reactivity and selectivity of single-atom catalysts (SACs) remains a crucial yet challenging issue in heterogeneous catalysis. This study demonstrates selective catalysis facilitated by a polyoxometalates-mediated electronic interaction (PMEI) in a Pt single-atom catalyst supported on CeO2 modified with Keggin-type phosphotungstate acid (HPW), labeled as Pt1/CeO2-HPW. The PMEI effect originates from the unique arrangement of isolated Pt atoms and HPW clusters on the CeO2 support. Electrons are transferred from the ceria support to the electrophilic tungsten in HPW clusters, and subsequently, Pt atoms donate electrons to the now electron-deficient ceria. This phenomenon enhances the positive charge of Pt atoms, moderating O2 activation and limiting lattice oxygen mobility compared to the conventional Pt1/CeO2 catalyst. The resulting electronic structure of Pt combined with the strong and local acidic environment of HPW on Pt1/CeO2-HPW leads to improved efficiency and N2 selectivity in the degradation of NH3 and NO, as well as increased CO2 yield when inputting volatile organic compounds. This study sheds the light on the design of SACs with balanced reactivity and selectivity for environmental catalysis.

Optimizing surface active sites via burying single atom into subsurface lattice for boosted methanol electrooxidation

The precise fabrication and regulation of the stable catalysts with desired performance still challengeable for single atom catalysts. Here, the Ru single atoms with different coordination environment in Ni3FeN lattice are synthesized and studied as a typical case over alkaline methanol electrooxidation. The Ni3FeN with buried Ru atoms in subsurface lattice (Ni3FeN-Ruburied) exhibits high selectivity and Faradaic efficiency of methanol to formate conversion. Meanwhile, operando spectroscopies reveal that the Ni3FeN-Ruburied exhibits an optimized adsorption of reactants along with an inhibited surface structural reconstruction. Additional theoretical simulations demonstrate that the Ni3FeN-Ruburied displays a regulated local electronic states of surface metal atoms with an optimized adsorption of reactants and reduced energy barrier of potential determining step. This work not only reports a high-efficient catalyst for methanol to formate conversion in alkaline condition, but also offers the insight into the rational design of single atom catalysts with more accessible surficial active sites.

Thermally-Stable Single-Site Pd on CeO2 Catalyst for Selective Amination of Phenols to Aromatic Amines without External Hydrogen

Developing a new route to produce aromatic amines as key chemicals from renewable phenols is a benign alternative to current fossil-based routes like nitroaromatic hydrogenation, but is challenging because of the high dissociation energy of the Ar-OH bond and difficulty in controlling side reactions. Herein, an aerosolizing-pyrolysis strategy was developed to prepare high-density single-site cationic Pd species immobilized on CeO2 (Pd1/CeO2) with excellent sintering resistance. The obtained Pd1/CeO2 catalysts achieved remarkable selectivity of important aromatic amines (yield up to 76.2 %) in the phenols amination with amines without external hydrogen sources, while Pd nano-catalysts mainly afforded phenyl-ring-saturation products. The excellent catalytic properties of the Pd1/CeO2 are closely related to high-loading Pd single-site catalysts with abundant surface defect sites and suitable acid-base properties. This report provides a sustainable route for producing aromatic amines from renewable feedstocks.

Synthesis of Palladium Nanowires on Flagella Template for Electrochemical Biosensor Detection of microRNA-21

In recent years, the use of bacterial flagella as biomimetic templates has gained increasing attention in nanomaterial synthesis due to their unique structural and functional properties. In this study, we optimized the flagella extraction method and achieved a high concentration of flagella solution. Flagella were isolated from Escherichia coli. Surface characterization revealed that the flagella had abundant functional groups, such as amino and carboxyl groups, which can serve as nucleation sites for the controlled nucleation and growth of metal nanomaterials. Using bacterial flagella as a template, we synthesized one-dimensional palladium nanowires (Fla-Pd NWs). The results of morphological and phase analyses showed that the synthesized palladium nanoparticles were uniformly and densely distributed on the surface of the flagella. Moreover, the Fla-Pd nanowires exhibited superior electrocatalytic activity, which was applied to develop an electrochemical biosensor. This biosensor was used to detect the early breast cancer biomarker microRNA-21 and exhibited a linear range of 0.66-1.98 µmol/L and a detection limit of 0.78 µmol/L. The method demonstrated high selectivity and reusability, making it a promising strategy for early cancer diagnosis.

Hierarchically Ordered Pore Engineering of Carbon Supports with High-Density Edge-Type Single-Atom Sites to Boost Electrochemical CO2 Reduction

Metal sites at the edge of the carbon matrix possess unique geometric and electronic structures, exhibiting higher intrinsic activity than in-plane sites. However, creating single-atom catalysts with high-density edge sites remains challenging. Herein, the hierarchically ordered pore engineering of metal-organic framework-based materials to construct high-density edge-type single-atomic Ni sites for electrochemical CO2 reduction reaction (CO2RR) is reported. The created ordered macroporous structure can expose enriched edges, further increased by hollowing the pore walls, which overcomes the low edge percentage in the traditional microporous substrates. The prepared single-atomic Ni sites on the ordered macroporous carbon with ultra-thin hollow walls (Ni/H-OMC) exhibit Faraday efficiencies of CO above 90% in an ultra-wide potential window of 600 mV and a turnover frequency of 3.4 × 104 h-1, much superior than that of the microporous material with dominant plane-type sites. Theory calculations reveal that NiN4 sites at the edges have a significantly disrupted charge distribution, forming electron-rich Ni centers with enhanced adsorption ability with *COOH, thereby boosting CO2RR efficiency. Furthermore, a Zn-CO2 battery using the Ni/H-OMC cathode shows an unprecedentedly high power density of 15.9 mW cm-2 and maintains an exceptionally stable charge-discharge performance over 100 h.

Single-atom nanozymes for antibacterial applications

Bacteria have always been a thorny problem that threatens human health and food safety. Conventional antibiotic treatment often leads to the emergence of drug resistance. Therefore, the development of more effective antibacterial agents is urgently needed. Single-atom nanozymes (SAzymes) can efficiently eliminate bacteria due to their high atomic utilization, abundant active centers, and good natural enzyme mimicry, providing a potential alternative choice for antibiotics in antibacterial applications. Here, the antibacterial applications of SAzymes are reviewed and their catalytic properties are discussed from the aspects of active sites, coordination environment regulation and carrier selection. Then, the antibacterial effect of SAzymes is elaborated in combination with photothermal therapy (PTT) and sonodynamic therapy (SDT). Finally, the problems faced by SAzymes in antibacterial applications and their future development potential are proposed.

Fabrication of Highly Dispersed Ru Catalysts on CeO2 for Efficient C3H6 Oxidation

Emissions of volatile organic compounds (VOCs) threaten both the environment and human health. To realize the elimination of VOCs, Ru/CeO2 catalysts have been intensively investigated and applied. Although it has been widely acknowledged that the catalytic performance of platinum group metal catalysts was highly determined by their dispersion and coordination environment, the most reactive structures on Ru/CeO2 catalysts for VOCs oxidation are still ambiguous. In this work, starting from Ce-BTC (BTC = 1,3,5-benzenetricarboxylic acid) materials, atomically dispersed Ru catalysts and agglomerated Ru catalysts were successfully created via one-step hydrothermal method (Ru-CeO2-BTC) and conventional incipient wetness impregnation method (Ru/CeO2-BTC), respectively. In a typical model reaction of C3H6 oxidation, atomically dispersed Ruδ+ species with the formation of abundant Ru-O-Ce linkages on Ru-CeO2-BTC were found to perform much better than agglomerated RuOx species on Ru/CeO2-BTC. Further characterizations and mechanism study disclosed that Ru-CeO2-BTC catalyst with atomically dispersed Ru ions and more superior low temperature redox performance compared to Ru/CeO2-BTC could better facilitate the adsorption/activation of C3H6 and the decomposition/desorption of intermediates, thus exhibiting superior C3H6 oxidation activity. This work elucidated the reactive sites on Ru/CeO2 catalysts in the C3H6 oxidation reaction and provided insightful guidance for designing efficient Ru/CeO2 catalysts to eliminate VOCs.

Edge-Rich Pt-O-Ce Sites in CeO2 Supported Patchy Atomic-Layer Pt Enable a Non-CO Pathway for Efficient Methanol Oxidation

Rational design of efficient methanol oxidation reaction (MOR) catalyst that undergo non-CO pathway is essential to resolve the long-standing poisoning issue. However, it remains a huge challenge due to the rather difficulty in maximizing the non-CO pathway by the selective coupling between the key *CHO and *OH intermediates. Here, we report a high-performance electrocatalyst of patchy atomic-layer Pt epitaxial growth on CeO2 nanocube (Pt ALs/CeO2) with maximum electronic metal-support interaction for enhancing the coupling selectively. The small-size monolayer material achieves an optimal geometrical distance between edge Pt-O-Ce sites and *OH absorbed on CeO2, which well restrains the dehydrogenation of *CHO, resulting in the non-CO pathway. Meanwhile, the *CHO/*CO intermediate generated at inner Pt-O-Ce sites can migrate to edge, inducing the subsequent coupling reaction, thus avoiding poisoning while promoting reaction efficiency. Consequently, Pt ALs/CeO2 exhibits exceptionally catalytic stability with negligible degradation even under 1000 s pure CO poisoning operation and high mass activity (14.87 A/mgPt), enabling it one of the best-performing alkali-stable MOR catalysts.

Enhancing Activity and Stability of Pd-on-TiO2 Single-Atom Catalyst for Low-Temperature CO Oxidation through in Situ Local Environment Tailoring

The development of efficient Pd single-atom catalysts for CO oxidation, crucial for environmental protection and fundamental studies, has been hindered by their limited reactivity and thermal stability. Here, we report a thermally stable TiO2-supported Pd single-atom catalyst that exhibits enhanced intrinsic CO oxidation activity by tunning the local coordination of Pd atoms via H2 treatment. Our comprehensive characterization reveals that H2-treated Pd single atoms have reduced nearest Pd-O coordination and form short-distanced Pd-Ti coordination, effectively stabilizing Pd as isolated atoms even at high temperatures. During CO oxidation, partial replacement of the Pd-Ti coordination by O or CO occurs. This unique Pd local environment facilitates CO adsorption and promotes the activity of the surrounding oxygen species, leading to superior catalytic performance. Remarkably, the turnover frequency of the H2-treated Pd single-atom catalyst at 120 °C surpasses that of the O2-treated Pd single-atom catalyst and the most effective Pd/Pt single-atom catalysts by an order of magnitude. These findings open up new possibilities for the design of high-performance single-atom catalysts for crucial industrial and environmental applications.

Recent Advances on Two-Dimensional Nanomaterials Supported Single-Atom for Hydrogen Evolution Electrocatalysts

Water electrolysis has been recognized as a promising technology that can convert renewable energy into hydrogen for storage and utilization. The superior activity and low cost of catalysis are key factors in promoting the industrialization of water electrolysis. Single-atom catalysts (SACs) have attracted attention due to their ultra-high atomic utilization, clear structure, and highest hydrogen evolution reaction (HER) performance. In addition, the performance and stability of single-atom (SA) substrates are crucial, and various two-dimensional (2D) nanomaterial supports have become promising foundations for SA due to their unique exposed surfaces, diverse elemental compositions, and flexible electronic structures, to drive single atoms to reach performance limits. The SA supported by 2D nanomaterials exhibits various electronic interactions and synergistic effects, all of which need to be comprehensively summarized. This article aims to organize and discuss the progress of 2D nanomaterial single-atom supports in enhancing HER, including common and widely used synthesis methods, advanced characterization techniques, different types of 2D supports, and the correlation between structural hydrogen evolution performance. Finally, the latest understanding of 2D nanomaterial supports was proposed.

Coordination engineering of single-atom ruthenium in 2D MoS2 for enhanced hydrogen evolution

This study investigates the enhancement of catalytic activity in single-atom catalysts (SACs) through coordination engineering. By introducing non-metallic atoms (X = N, O, or F) into the basal plane of MoS2 via defect engineering and subsequently anchoring hetero-metallic Ru atoms, we created 10 types of non-metal-coordinated Ru SACs (Ru-X-MoS2). Computations indicate that non-metal atom X significantly modifies the electronic structure of Ru, optimizing the hydrogen evolution reaction (HER). Across acidic, neutral, and alkaline electrolytes, Ru-X-MoS2 catalysts exhibit significantly improved HER performance compared with Ru-MoS2, even surpassing commercial Pt/C catalysts. Among these, the Ru-O-MoS2 catalyst, characterized by its asymmetrically coordinated O2-Ru-S1 active sites, demonstrates the most favorable electrocatalytic behavior and exceptional stability across all pH ranges. Consequently, single-atom coordination engineering presents a powerful strategy for enhancing SAC catalytic performance, with promising applications in various fields.

Probing Basal and Prismatic Planes of Graphitic Materials for Metal Single Atom and Subnanometer Cluster Stabilization

Supported metal single atom catalysis is a dynamic research area in catalysis science combining the advantages of homogeneous and heterogeneous catalysis. Understanding the interactions between metal single atoms and the support constitutes a challenge facing the development of such catalysts, since these interactions are essential in optimizing the catalytic performance. For conventional carbon supports, two types of surfaces can contribute to single atom stabilization: the basal planes and the prismatic surface; both of which can be decorated by defects and surface oxygen groups. To date, most studies on carbon-supported single atom catalysts focused on nitrogen-doped carbons, which, unlike classic carbon materials, have a fairly well-defined chemical environment. Herein we report the synthesis, characterization and modeling of rhodium single atom catalysts supported on carbon materials presenting distinct concentrations of surface oxygen groups and basal/prismatic surface area. The influence of these parameters on the speciation of the Rh species, their coordination and ultimately on their catalytic performance in hydrogenation and hydroformylation reactions is analyzed. The results obtained show that catalysis itself is an interesting tool for the fine characterization of these materials, for which the detection of small quantities of metal clusters remains a challenge, even when combining several cutting-edge analytical methods.

Exploring the Facet-Dependent Structural Evolution of Pt/CeO2 Catalysts Induced by Typical Pretreatments for CO Oxidation

Atomic-scale insights into the interactions between metals and supports play a crucial role in optimizing catalyst design, understanding catalytic mechanisms, and enhancing chemical conversion processes. The effects of oxide support on the dynamic behavior of supported metal species during pretreatments or reactions have been attracting a lot of attention; however, very less systematic integrations are carried out experimentally using real catalysts. In this study, we here utilized facet-controlled CeO2 as examples to explore their influence on the supported Pt species (1.0 wt %) during the reducing and oxidizing pretreatments that are typically applied in heterogeneous catalysts. By employing a combination of microscopy, spectroscopy, and first-principles calculations, it is demonstrated that the exposed crystal facets of CeO2 govern the evolution behavior of supported Pt species under different environmental conditions. This leads to distinct local coordinations and charge states of the Pt species, which directly influence the catalytic reactivity and can be leveraged to control the catalytic performance for CO oxidation reactions.

Interface Induced by Hydrothermal Aging Boosts the Low-Temperature Activity of Cu-SSZ-13 for Selective Catalytic Reduction of NOx

Hitherto, sulfur poisoning and hydrothermal aging have still been the challenges faced in practical applications of the Cu-SSZ-13 catalyst for the selective catalytic reduction (SCR) of NOx from diesel engine exhaust. Here, we elaborately design and conduct an in-depth investigation of the synthetic effects of hydrothermal aging and SO2 poisoning on pristine Cu-SSZ-13 and Cu-SSZ-13@Ce0.75Zr0.25O2 core@shell structure catalysts (Cu@CZ). It has been discovered that Cu@CZ susceptible to 750 °C with 5 vol % H2O followed by 200 ppm SO2 with 5 vol % H2O (Cu@CZ-A-S) could still maintain nearly 100% NOx conversion across the significantly wider temperature region of 200-425 °C, which is remarkably broader than that of the Cu-SSZ-13-A-S (300-400 °C) counterpart. The experimental results show that the hydrothermal aging process results in the migration of highly active Cu species within the cage of Cu-SSZ-13 to the CZ surface, forming CuO/CZ with abundant interfaces, which significantly enhances the adsorption and subsequent activation of NO, leading to the generation of reactive N2O3 and HONO intermediates. Moreover, density functional theory (DFT) calculations reveal that the H of the HONO* species can function as Brønsted acid sites, effectively adsorbing NH3 to generate the active NH4NO2* intermediate, which readily decomposes into N2 and H2O. Furthermore, this pathway is the rate-determining step with an energy barrier of 0.93 eV, notably lower than that of the "standard SCR" pathway (1.42 eV). Therefore, the formation of the new CuO/CZ interface profoundly boosts the low-temperature NH3-SCR activity and improves the coresistance of the Cu@CZ catalyst to sulfur poisoning and hydrothermal aging.

Simultaneously activating molecular oxygen and surface lattice oxygen on Pt/TiO2 for low-temperature CO oxidation

Developing high-performance Pt-based catalysts with low Pt loading is crucial but challenging for CO oxidation at temperatures below 100 °C. Herein, we report a Pt-based catalyst with only a 0.15 wt% Pt loading, which consists of Pt-Ti intermetallic single-atom alloy (ISAA) and Pt nanoparticles (NP) co-supported on a defective TiO2 support, achieving a record high turnover frequency of 11.59 s-1 at 80 °C and complete conversion of CO at 120 °C. This is because the coexistence of Pt-Ti ISAA and Pt NP significantly alleviates the competitive adsorption of CO and O2, enhancing the activation of O2. Furthermore, Pt single atom sites are stabilized by Pt-Ti ISAA, resulting in distortion of the TiO2 lattice within Pt-Ti ISAA. This distortion activates the neighboring surface lattice oxygen, allowing for the simultaneous occurrence of the Mars-van Krevelen and Langmuir-Hinshelwood reaction paths at low temperatures.

Advanced Characterization Techniques and Theoretical Calculation for Single Atom Catalysts in Fenton-like Chemistry

Single-atom catalysts (SACs) have attracted extensive attention due to their unique catalytic properties and wide range of applications. Advanced characterization techniques, such as energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, scanning electron microscopy, and X-ray absorption fine-structure spectroscopy, have been used to investigate the elemental compositions, structural morphologies, and chemical bonding states of SACs in detail, aiming at unraveling the catalytic mechanism. Meanwhile, theoretical calculations, such as quantum chemical calculations and kinetic simulations, were used to predict the catalytic reaction pathways, active sites, and reaction kinetic behaviors of SACs, providing theoretical guidance for the design and optimization of SACs. This review overviews advanced characterization techniques and theoretical calculations for SACs in Fenton-like chemistry. Moreover, this work highlights the importance of advanced characterization techniques and theoretical calculations in the study of SACs and provides perspectives on the potential applications of SACs in the field of environmental remediation and the challenges of practical engineering.

Rutile TiO2-Supported Pt Nanoparticle Catalysts for the Low-Temperature Oxidation of Ethane to Ethanol

Structure-function relationships of supported metal nanoparticle catalysts in the CO-assisted oxidation of ethane to ethanol were investigated. A rutile TiO2-supported Pt nanoparticle catalyst exhibited the highest ethanol production rate and selectivity. During the reaction, sequential changes in the geometric/electronic states and the particle size of the Pt nanoparticles were observed. The comparison of the catalytic performances of model catalysts with controlled metal-support interactions revealed that Pt0 nanoparticles of 2-3 nm with a high fraction of the surface Ptδ+ species are highly active for the oxidation of ethane to ethanol. The coadded CO plays a pivotal role not only in tuning the oxidation state of the surface Pt but also in producing H2O2, which is the true oxidant for the reaction. The supported Pt nanoparticle uses in situ-generated H2O2 to activate ethane, where the C2H5OOH intermediate is formed through a nonradical mechanism and subsequently converted to C2H5OH. This reaction occurs even at 50 °C with an apparent activation energy of 32 kJ mol-1. The present study sheds light on the usefulness of surface-engineered Pt nanoparticles for the low-temperature oxidation of ethane to ethanol.

Surface-Grafted Single-Atomic Pt-Nx Complex with a Precisely Regulating Coordination Sphere for Efficient Electron Acceptor-Inducing Interfacial Electron Transfer

Based on the electron-withdrawing effect of the Pt(bpy)Cl2 molecule, a simple post-modification amide reaction was firstly used to graft it onto the surface of NH2-MIL-125, which performed as a highly efficient electron acceptor that induced the conversion of the photoinduced charge migration pathway from internal BDC→TiOx migration to external BDC→PtNx migration, significantly improving the efficiency of photoinduced electron transfer and separation. Furthermore, precisely regulating over the first coordination sphere of Pt single atoms was achieved using further post-modification with additional bipyridine to investigate the effect of Pt-Nx coordination numbers on reaction activity. The as-synthesized NML-PtN2 exhibited superior photocatalytic hydrogen evolution activity of 7.608 mmol g-1 h-1, a remarkable improvement of 225 and 2.26 times compared to pristine NH2-MIL-125 and NML-PtN4, respectively. In addition, the superior apparent quantum yield of 4.01 % (390 nm) and turnover frequency of 190.3 h-1 (0.78 wt % Pt SA; 129 times compared to Pt nanoparticles/NML) revealed the high solar utilization efficiency and hydrogen evolution activity of the material. And macroscopic color changes caused by the transition of carrier migration paths was first observed. It holds profound significance for the design of MOF-Molecule catalysts with efficient charge carrier separation and precise regulation of single-atom coordination sphere.

General negative pressure annealing approach for creating ultra-high-loading single atom catalyst libraries

Catalyst systems populated by high-density single atoms are crucial for improving catalytic activity and selectivity, which can potentially maximize the industrial prospects of heterogeneous single-atom catalysts (SACs). However, achieving high-loading SACs with metal contents above 10 wt% remains challenging. Here we describe a general negative pressure annealing strategy to fabricate ultrahigh-loading SACs with metal contents up to 27.3-44.8 wt% for 13 different metals on a typical carbon nitride matrix. Furthermore, our approach enables the synthesis of high-entropy single-atom catalysts (HESACs) that exhibit the coexistence of multiple metal single atoms with high metal contents. In-situ aberration-corrected HAADF-STEM (AC-STEM) combined with ex-situ X-ray absorption fine structure (XAFS) demonstrate that the negative pressure annealing treatment accelerates the removal of anionic ligand in metal precursors and boosts the bonding of metal species with N defective sites, enabling the formation of dense N-coordinated metal sites. Increasing metal loading on a platinum (Pt) SAC to 41.8 wt% significantly enhances the activity of propane oxidation towards liquid products, including acetone, methanol, and acetic acid et al. This work presents a straightforward and universal approach for achieving many low-cost and high-density SACs for efficient catalytic transformations.

Structural Design of Single-Atom Catalysts for Enhancing Petrochemical Catalytic Reaction Process

Petroleum, as the "lifeblood" of industrial development, is the important energy source and raw material. The selective transformation of petroleum into high-end chemicals is of great significance, but still exists enormous challenges. Single-atom catalysts (SACs) with 100% atom utilization and homogeneous active sites, promise a broad application in petrochemical processes. Herein, the research systematically summarizes the recent research progress of SACs in petrochemical catalytic reaction, proposes the role of structural design of SACs in enhancing catalytic performance, elucidates the catalytic reaction mechanisms of SACs in the conversion of petrochemical processes, and reveals the high activity origins of SACs at the atomic scale. Finally, the key challenges are summarized and an outlook on the design, identification of active sites, and the appropriate application of artificial intelligence technology is provided for achieving scale-up application of SACs in petrochemical process.

Insights into the Construction of Robust Pt Clusters with Satisfactory Stability on CeO2 for the Catalytic Oxidation of CO

Improving the efficiency of platinum group metals (Pt, Pd, Rh, etc.) in catalytic oxidation reactions remains an urgent topic. The conflict between the low-temperature activity and high-temperature stability of noble metals can hardly reach a consensus. For instance, Pt cluster catalysts supported on CeO2 with high low-temperature activity will suffer from deactivation due to the redispersion under high-temperature lean-burn reaction conditions. Herein, two Pt1/CeO2 prepared by the incipient wetness impregnation method using different Pt precursors possessed varied Pt-O and Pt-O-Ce coordination numbers (CNs). They showed various priorities in CO oxidation versus NH3 selective catalytic oxidation, materials with higher CNPt-O-Ce selectively catalyzing NH3 oxidation to N2 more superior, conversely materials with lower CNPt-O-Ce performing better in CO oxidation. After activation by H2 reduction, both formed massive Pt clusters on the CeO2 surface but showed drastically distinct stability in lean-burn CO oxidation reactions. By summarizing the experimental results of high-angle annular dark-field scanning transmission electron microscopy, X-ray absorption spectroscopy, Raman spectroscopy, in situ diffuse reflectance infrared Fourier transform spectroscopy, etc., it is beyond doubt that the difference in the initial states of Pt1 due to distinct precursors indeed determine the redispersion behavior of the reduced Pt clusters on CeO2. Materials with lower CNPt-O-Ce and higher CNPt-O are more likely to form robust Pt clusters, as they are not conducive to Pt anchoring, thus restricting the reversible structural evolution occurring under lean-burn CO oxidation and reductive conditions. This approach serves as a guide for the convenient and efficient construction and exploration of robust Pt cluster catalysts.

Well-dispersed Pt/Nb2O5on zeolitic imidazolate framework derived nitrogen-doped carbon for efficient oxygen reduction reaction

In this work, an advanced hybrid material was constructed by incorporating niobium pentoxide (Nb2O5) nanocrystals with nitrogen-doped carbon (NC) derived from ZIF-8 dodecahedrons, serving as a support, referred to as Nb2O5/NC. Pt nanocrystals were dispersed onto Nb2O5/NC using a simple impregnation reduction method. The obtained Pt/Nb2O5/NC electrocatalyst showed high oxygen reduction reaction (ORR) activity due to three-phase mutual contacting structure with well-dispersed Pt and Nb2O5NPs. In addition, the conductive NC benefits electron transfer, while the induced Nb2O5can regulate the electronic structure of Pt element and anchor Pt nanocrystals, thereby enhancing the ORR activity and stability. The half-wave potential (E1/2) for Pt/Nb2O5/NC is 0.886 V, which is higher than that of Pt/NC (E1/2= 0.826 V). The stability examinations demonstrated that Pt/Nb2O5/NC exhibited higher electrocatalytic durability than Pt/NC. Our work provides a new direction for synthesis and structural design of precious metal/oxides hybrid electrocatalysts.

Enhancement Effect Induced by the Second Metal to Promote Ozone Catalytic Oxidation of VOCs

It is a promising research direction to develop catalysts with high stability and ozone utilization for low-temperature ozone catalytic oxidation of VOCs. While bimetallic catalysts exhibit excellent catalytic activity compared with conventional single noble metal catalysts, limited success has been achieved in the influence of the bimetallic effect on the stability and ozone utilization of metal catalysts. Herein, it is necessary to systematically study the enhancement effect in the ozone catalytic reaction induced by the second metal. With a simple continuous impregnation method, a platinum-cerium bimetallic catalyst is prepared. Also highlighted are studies from several aspects of the contribution of the second metal (Ce) to the stability and ozone utilization of the catalysts, including the "electronic effect" and "geometric effect". The synergistic removal rate of toluene and ozone is nearly 100% at 30 °C, and it still shows positive stability after high humidity and a long reaction time. More importantly, the instructive significance, which is the in-depth knowledge of enhanced catalytic mechanism of bimetallic catalysts resulting from a second metal, is provided by this work.

Probing Coordination Number of Single-Atom Catalysts by d-Band Center-Regulated Luminescence

It is essential to probe the coordination number (CN) because it is a crucial factor to ensure the catalytic capability of single-atom catalysts (SACs). Currently, synchrotron X-ray absorption spectroscopy (XAS) is widely used to measure the CN. However, the scarcity of synchrotron X-ray source and complicated data analysis restrict its wide applications in determining the CN of SACs. In this contribution, we have developed a d-band center-regulated acetone cataluminescence (CTL) probe for a rapid screening of the CN of Pt-SACs. It is disclosed that the CN-triggered CTL is attributed to the fact that the increased CN could induce the downward shift of d-band center position, which assists the acetone adsorption and promotes the subsequent catalytic reaction. In addition, the universality of the proposed acetone-CTL probe is verified by determining the CN of Fe-SACs. This work has opened a new avenue for exploring an alternative to synchrotron XAS for the determination of CN of SACs and even conventional metal catalysts through d-band center-regulated CTL.

Engineering the Coordination Environment of Ir Single Atoms with Surface Titanium Oxide Amorphization for Superior Chlorine Evolution Reaction

The chlorine evolution reaction (CER) is essential for industrial Cl2 production but strongly relies on the use of dimensionally stable anode (DSA) with high-amount precious Ru/Ir oxide on a Ti substrate. For the purpose of sustainable development, precious metal decrement and performance improvement are highly desirable for the development of CER anodes. Herein, we demonstrate that surface titanium oxide amorphization is crucial to regulate the coordination environment of stabilized Ir single atoms for efficient and durable chlorine evolution of Ti monolithic anodes. Experimental and theoretical results revealed the formation of four-coordinated Ir1O4 and six-coordinated Ir1O6 sites on amorphous and crystalline titanium oxides, respectively. Interestingly, the Ir1O4 sites exhibited a superior CER performance, with a mass activity about 10 and 500 times those of the Ir1O6 counterpart and DSA, respectively. Moreover, the Ir1O4 anode displayed excellent durability for 200 h, far longer than that of its Ir1O6 counterpart (2 h). Mechanism studies showed that the unsaturated Ir in Ir1O4 was the active center for chlorine evolution, which was changed to the top-coordinated O in Ir1O6. This change of active sites greatly affected the adsorption energy of Cl species, thus accounting for their different CER activity. More importantly, the amorphous structure and restrained water dissociation of Ir1O4 synergistically prevent oxygen permeation across the Ti substrate, contributing to its long-term CER stability. This study sheds light on the importance of single-atom coordination structures in the reactivity of catalysts and offers a facile strategy to prepare highly active single-atom CER anodes via surface titanium oxide amorphization.

Facilitating alkaline hydrogen evolution reaction on the hetero-interfaced Ru/RuO2 through Pt single atoms doping

Exploring an active and cost-effective electrocatalyst alternative to carbon-supported platinum nanoparticles for alkaline hydrogen evolution reaction (HER) have remained elusive to date. Here, we report a catalyst based on platinum single atoms (SAs) doped into the hetero-interfaced Ru/RuO2 support (referred to as Pt-Ru/RuO2), which features a low HER overpotential, an excellent stability and a distinctly enhanced cost-based activity compared to commercial Pt/C and Ru/C in 1 M KOH. Advanced physico-chemical characterizations disclose that the sluggish water dissociation is accelerated by RuO2 while Pt SAs and the metallic Ru facilitate the subsequent H* combination. Theoretical calculations correlate with the experimental findings. Furthermore, Pt-Ru/RuO2 only requires 1.90 V to reach 1 A cm-2 and delivers a high price activity in the anion exchange membrane water electrolyzer, outperforming the benchmark Pt/C. This research offers a feasible guidance for developing the noble metal-based catalysts with high performance and low cost toward practical H2 production.

Role of the In-Situ-Formed Surface (Pt-S-O)-Ti Active Structure in SO2-Promoted C3H8 Combustion over a Pt/TiO2 Catalyst

Typically, SO2 unavoidably deactivates catalysts in most heterogeneous catalytic oxidations. However, for Pt-based catalysts, SO2 exhibits an extraordinary boosting effect in propane catalytic oxidation, but the promotive mechanism remains contentious. In this study, an in situ-formed tactful (Pt-S-O)-Ti structure was concluded to be a key factor for Pt/TiO2 catalysts with a substantial SO2 tolerance ability. The experiments and theoretical calculations confirm that the high degree of hybridization and orbital coupling between Pt 5d and S 3p orbitals enable more charge transfer from Pt to S species, thus forming the (Pt-S-O)-Ti structure with the oxygen atom dissociated from the chemisorbed O2 adsorbed on oxygen vacancies. The active oxygen atom in the (Pt-S-O)-Ti active structure is a robust site for C3H8 adsorption, leading to a better C3H8 combustion performance. This work can provide insights into the rational design of chemical bonds for high SO2 tolerance catalysts, thereby improving economic and environmental benefits.

Influence of Oxygen Vacancy-Induced Coordination Change on Pd/CeO2 for NO Reduction

The byproduct formation in environmental catalysis is strongly influenced by the chemical state and coordination of catalysts. Herein, two Pd/CeO2 catalysts (PdCe-350 and PdCe-800) with varying oxygen vacancies (Ov) and coordination numbers (CN) of Pd were prepared to investigate the mechanism of N2O and NH3 formation during NO reduction by CO. PdCe-350 exhibits a higher density of Ov and Pd sites with higher CN, leading to an enhanced metal-support interaction by electron transformation from the support to Pd. Consequently, PdCe-350 displayed increased levels of byproduct formation. In situ spectroscopies under dry and wet conditions revealed that at low temperatures, the N2O formation strongly correlated with the Ov density through the decomposition of chelating nitro species on PdCe-350. Conversely, at high temperatures, it was linked to the reactivity of Pd species, primarily facilitated by monodentate nitrates on PdCe-800. In terms of NH3 formation, its occurrence was closely associated with the activation of H2O and C3H6, since a water-gas shift or hydrocarbon reforming could provide hydrogen. Both bridging and monodentate nitrates showed activity in NH3 formation, while hyponitrites were identified as key intermediates for both catalysts. The insights provide a fundamental understanding of the intricate relationship among the local coordination of Pd, surface Ov, and byproduct distribution.

Pd-CeO2 catalyst facilely derived from one-pot generated Pd@Ce-BTC for low temperature CO oxidation

Due to the capacity to offer abundant catalytic sites within porous solids featuring high surface areas, metal-organic frameworks (MOFs) and their derivatives have garnered considerable attention as prospective catalysts in environmental catalysis. To promote the industrial application of MOFs, there is an urgent need for an effective and environmental-friendly preparation approach. Breaking through the limitation of the traditional two-step preparation method that Pd was introduced to the already prepared Ce-BTC (Pd/Ce-BTC, BTC = 1, 3, 5 benzenetricarboxylate), in this work, we present a novel one-pot solvothermal method for synthesizing the Pd material supported by Ce-BTC (Pd@Ce-BTC). After pyrolysis in N2 flow or air flow, Pd-CeO2 catalysts derived from Pd@Ce-BTC exhibited much higher CO oxidation activity than those from Pd/Ce-BTC. Moreover, Pd/Ce-BTC and Pd@Ce-BTC pyrolyzed in N2 flow (Pd/Ce-BTC-N and Pd@Ce-BTC-N) could better catalyze the oxidation of CO than Pd/Ce-BTC and Pd@Ce-BTC pyrolyzed in air flow (Pd/Ce-BTC-A and Pd@Ce-BTC-A). Further characterizations revealed that the abundant surface Ce3+ species, rich surface adsorbed oxygen species and superior redox properties were the main reasons for the superior CO oxidation activity of Pd@Ce-BTC-N.

Fine-Tuning of Pt Dispersion on Al2O3 and Understanding the Nature of Active Pt Sites for Efficient CO and NH3 Oxidation Reactions

Fine-tuning the dispersion of active metal species on widely used supports is a research hotspot in the catalysis community, which is vital for achieving a balance between the atomic utilization efficiency and the intrinsic activity of active sites. In this work, using bayerite Al(OH)3 as support directly or after precalcination at 200 or 550 °C, Pt/Al2O3 catalysts with distinct Pt dispersions from single atoms to clusters (ca. 2 nm) were prepared and evaluated for CO and NH3 removal. Richer surface hydroxyl groups on AlOx(OH)y support were proved to better facilitate the dispersion of Pt. However, Pt/Al2O3 with relatively lower Pt dispersion could exhibit better activity in CO/NH3 oxidation reactions. Further reaction mechanism study revealed that the Pt sites on Pt/Al2O3 with lower Pt dispersion could be activated to Pt0 species much easier under the CO oxidation condition, on which a higher CO adsorption capacity and more efficient O2 activation were achieved simultaneously. Compared to Pt single atoms, PtOx clusters could also better activate NH3 into -NH2 and -HNO species. The higher CO adsorption capacity and the more efficient NH3/O2 activation ability on Pt/Al2O3 with relatively lower Pt dispersion well explained its higher CO/NH3 oxidation activity. This study emphasizes the importance of avoiding a singular pursuit of single-atom catalyst synthesis and instead focusing on achieving the most effective Pt species on Al2O3 support for targeted reactions. This approach avoids unnecessary limitations and enables a more practical and efficient strategy for Pt catalyst fabrication in emission control applications.

Surface Activation by Single Ru Atoms for Enhanced High-Temperature CO2 Electrolysis

Cathodic CO2 adsorption and activation is essential for high-temperature CO2 electrolysis in solid oxide electrolysis cells (SOECs). However, the component of oxygen ionic conductor in the cathode displays limited electrocatalytic activity. Herein, stable single Ruthenium (Ru) atoms are anchored on the surface of oxygen ionic conductor (Ce0.8 Sm0.2 O2-δ , SDC) via the strong covalent metal-support interaction, which evidently modifies the electronic structure of SDC surface for favorable oxygen vacancy formation and enhanced CO2 adsorption and activation, finally evoking the electrocatalytic activity of SDC for high-temperature CO2 electrolysis. Experimentally, SOEC with the Ru1 /SDC-La0.6 Sr0.4 Co0.2 Fe0.8 O3-δ cathode exhibits a current density as high as 2.39 A cm-2 at 1.6 V and 800 °C. This work expands the application of single atom catalyst to the high-temperature electrocatalytic reaction in SOEC and provides an efficient strategy to tailor the electronic structure and electrocatalytic activity of SOEC cathode at the atomic scale.

Catalyzing Generation and Stabilization of Oxygen Vacancies on CeO2-x Nanorods by Pt Nanoclusters as Nanozymes for Catalytic Therapy

Although CeO2 nanomaterials have been widely explored as nanozymes for catalytic therapy, they still suffer from relatively low activities. Herein, the catalyzing generation and stabilization of oxygen vacancies on CeO2 nanorods by Pt nanoclusters via H2 gas reduction under mild temperature (350 °C) to obtain Pt/CeO2- x , which can serve as a highly efficient nanozyme for catalytic cancer therapy, is reported. The deposited Pt on CeO2 by the atomic layer deposition technique not only can serve as the catalyst to generate oxygen vacancies under mild temperature reduction through the hydrogen spillover effect, but also can stabilize the generated oxygen vacancies. Meanwhile, the oxygen vacancies also provide anchoring sites for Pt forming strong metal-support interactions and thus preventing their agglomerations. Importantly, the Pt/CeO2- x reduced at 350 °C (Pt/CeO2- x -350R) exhibits excellent enzyme-mimicking catalytic activity for generation of reactive oxygen species (e.g., ·OH) as compared to other control samples, including CeO2 , Pt/CeO2 , and Pt/CeO2- x reduced at other temperatures, thus achieving excellent performance for tumor-specific catalytic therapy to efficiently eliminate cancer cells in vitro and ablate tumors in vivo. The excellent enzyme-mimicking catalytic activity of Pt/CeO2- x -350R originates from the good catalytic activities of oxygen vacancy-rich CeO2- x and Pt nanoclusters.

Slow-release synthesis of Cu single-atom catalysts with the optimized geometric structure and density of state distribution for Fenton-like catalysis

Single-atom Fenton-like catalysis has attracted significant attention, yet the quest for controllable synthesis of single-atom catalysts (SACs) with modulation of electron configuration is driven by the current disadvantages of poor activity, low selectivity, narrow pH range, and ambiguous structure-performance relationship. Herein, we devised an innovative strategy, the slow-release synthesis, to fabricate superior Cu SACs by facilitating the dynamic equilibrium between metal precursor supply and anchoring site formation. In this strategy, the dynamics of anchoring site formation, metal precursor release, and their binding reaction kinetics were regulated. Bolstered by harmoniously aligned dynamics, the selective and specific monatomic binding reactions were ensured to refine controllable SACs synthesis with well-defined structure-reactivity relationship. A copious quantity of monatomic dispersed metal became deposited on the C3N4/montmorillonite (MMT) interface and surface with accessible exposure due to the convenient mass transfer within ordered MMT. The slow-release effect facilitated the generation of targeted high-quality sites by equilibrating the supply and demand of the metal precursor and anchoring site and improved the utilization ratio of metal precursors. An excellent Fenton-like reactivity for contaminant degradation was achieved by the Cu1/C3N4/MMT with diminished toxic Cu liberation. Also, the selective ·OH-mediated reaction mechanism was elucidated. Our findings provide a strategy for regulating the intractable anchoring events and optimizing the microenvironment of the monatomic metal center to synthesize superior SACs.

Tuning the Interaction between Platinum Single Atoms and Ceria by Zirconia Doping for Efficient Catalytic Ammonia Oxidation

Aiming at the development of an efficient NH3 oxidation catalyst to eliminate the harmful NH3 slip from the stationary flue gas denitrification system and diesel exhaust aftertreatment system, a facile ZrO2 doping strategy was proposed to construct Pt1/CexZr1-xO2 catalysts with a tunable Pt-CeO2 interaction strength and Pt-O-Ce coordination environment. According to the results of systematic characterizations, Pt species supported on CexZr1-xO2 were mainly in the form of single atoms when x ≥ 0.7, and the strength of the Pt-CeO2 interaction and the coordination number of Pt-O-Ce bond (CNPt-O-Ce) on Pt1/CexZr1-xO2 showed a volcanic change as a function of the ZrO2 doping amount. It was proposed that the balance between the reasonable concentration of oxygen defects and limited surface Zr-Ox species well accounted for the strongest Pt-CeO2 interaction and the highest CNPt-O-Ce on Pt/Ce0.9Zr0.1O2. It was observed that the Pt/Ce0.9Zr0.1O2 catalyst exhibited much higher NH3 oxidation activity than other Pt/CexZr1-xO2 catalysts. The mechanism study revealed that the Pt1 species with the stronger Pt-CeO2 interaction and higher CNPt-O-Ce within Pt/Ce0.9Zr0.1O2 could better activate NH3 adsorbed on Lewis acid sites to react with O2 thus resulting in superior NH3 oxidation activity. This work provides a new approach for designing highly efficient Pt/CeO2 based catalysts for low-temperature NH3 oxidation.

What is the role of interface in the catalytic elimination of multi-carbon air pollutants?

Multi-carbon air pollutants pose serious hazards to the environment and health, especially soot and volatile organic compounds (VOCs). Catalytic oxidation is one of the most effective technologies for eliminating them. The oxidation of soot and most hydrocarbon VOCs begins with C-H (or edge-CH) activation, so this commonality can be targeted to design active sites. Rationally designed interface nanostructures optimize metal-support interactions (MSIs), providing suitable active sites for C-H activation. Meanwhile, the interfacial reactant spillover facilitates the further decomposition of activated intermediates. Thus, rationally exploiting interfacial effects is critical to enhancing catalytic activity. In this review, we analyzed recent advances in the following aspects: I. Understanding of the interface effects and design; II. Optimization of the catalyst-reactant contact, metal-support interface, and MSIs; III. Design of the interfacial composition and perimeter. Based on the analysis of the advances and current status, we provided challenges and opportunities for the rational design of interface nanostructures and interface-related stability. Meanwhile, a critical outlook was given on the interfacial sites of single-atom catalysts (SACs) for specific activation and catalytic selectivity.

Regulating the Pt1-CeO2 interaction via alkali modification for boosting the catalytic performance of single-atom catalysts

With the introduction of potassium species, the catalytic oxidation performance over the Pt₁/CeO₂ catalyst was significantly enhanced, where potassium ions acted as structural and electronic promoters, and formed Pt-O-K interactions with Pt to directly regulate the coordination environment and electronic state of Pt and the metal-support interaction between Pt and CeO₂.