Traction force microscopy on-chip: shear deformation of fibroblast cells

Bio-inspired microfluidics: A review

Biomicrofluidics, a subdomain of microfluidics, has been inspired by several ideas from nature. However, while the basic inspiration for the same may be drawn from the living world, the translation of all relevant essential functionalities to an artificially engineered framework does not remain trivial. Here, we review the recent progress in bio-inspired microfluidic systems via harnessing the integration of experimental and simulation tools delving into the interface of engineering and biology. Development of "on-chip" technologies as well as their multifarious applications is subsequently discussed, accompanying the relevant advancements in materials and fabrication technology. Pointers toward new directions in research, including an amalgamated fusion of data-driven modeling (such as artificial intelligence and machine learning) and physics-based paradigm, to come up with a human physiological replica on a synthetic bio-chip with due accounting of personalized features, are suggested. These are likely to facilitate physiologically replicating disease modeling on an artificially engineered biochip as well as advance drug development and screening in an expedited route with the minimization of animal and human trials.

Integration of Extracellular Matrices into Organ-on-Chip Systems

The extracellular matrix (ECM) is a complex, dynamic network present within all tissues and organs that not only acts as a mechanical support and anchorage point but can also direct fundamental cell behavior, function, and characteristics. Although the importance of the ECM is well established, the integration of well-controlled ECMs into Organ-on-Chip (OoC) platforms remains challenging and the methods to modulate and assess ECM properties on OoCs remain underdeveloped. In this review, current state-of-the-art design and assessment of in vitro ECM environments is discussed with a focus on their integration into OoCs. Among other things, synthetic and natural hydrogels, as well as polydimethylsiloxane (PDMS) used as substrates, coatings, or cell culture membranes are reviewed in terms of their ability to mimic the native ECM and their accessibility for characterization. The intricate interplay among materials, OoC architecture, and ECM characterization is critically discussed as it significantly complicates the design of ECM-related studies, comparability between works, and reproducibility that can be achieved across research laboratories. Improving the biomimetic nature of OoCs by integrating properly considered ECMs would contribute to their further adoption as replacements for animal models, and precisely tailored ECM properties would promote the use of OoCs in mechanobiology.

Frugal Approach toward Developing a Biomimetic, Microfluidic Network-on-a-Chip for In Vitro Analysis of Microvascular Physiology

Several disease conditions, such as cancer metastasis and atherosclerosis, are deeply connected with the complex biophysical phenomena taking place in the complicated architecture of the tiny blood vessels in human circulatory systems. Traditionally, these diseases have been probed by devising various animal models, which are otherwise constrained by ethical considerations as well as limited predictive capabilities. Development of an engineered network-on-a-chip, which replicates not only the functional aspects of the blood-carrying microvessels of human bodies, but also its geometrical complexity and hierarchical microstructure, is therefore central to the evaluation of organ-assist devices and disease models for therapeutic assessment. Overcoming the constraints of reported resource-intensive fabrication techniques, here, we report a facile, simple yet niche combination of surface engineering and microfabrication strategy to devise a highly ordered hierarchical microtubular network embedded within a polydimethylsiloxane (PDMS) slab for dynamic cell culture on a chip, with a vision of addressing the exclusive aspects of the vascular transport processes under medically relevant paradigms. The design consists of hierarchical complexity ranging from capillaries (∼80 μm) to large arteries (∼390 μm) and a simultaneous tuning of the interfacial material chemistry. The fluid flow behavior is characterized numerically within the hierarchical network, and a confluent endothelial layer is realized on the inner wall of microfluidic device. We further explore the efficacy of the device as a vascular deposition assay of circulatory tumor cells (MG-63 osteosarcoma cells) present in whole blood. The proposed paradigm of mimicking an in vitro vascular network in a low-cost paradigm holds further potential for probing cellular dynamics as well as offering critical insights into various vascular transport processes.

Activation of cell migration via morphological changes in focal adhesions depends on shear stress in MYCN-amplified neuroblastoma cells

Neuroblastoma is the most common solid tumour of childhood, and it metastasizes to distant organs. However, the mechanism of metastasis, which generally depends on the cell motility of the neuroblastoma, remains unclear. In many solid tumours, it has been reported that shear stress promotes metastasis. Here, we investigated the relationship between shear stress and cell motility in the MYCN-amplified human neuroblastoma cell line IMR32, using a microfluidic device. We confirmed that most of the cells migrated downstream, and cell motility increased dramatically when the cells were exposed to a shear stress of 0.4 Pa, equivalent to that expected in vivo. We observed that the morphological features of focal adhesion were changed under a shear stress of 0.4 Pa. We also investigated the relationship between malignancy and the motility of IMR32 cells under shear stress. Decreasing the expression of MYCN in IMR32 cells via siRNA transfection inhibited cell motility by a shear stress of 0.4 Pa. These results suggest that MYCN-amplified neuroblastoma cells under high shear stress migrate to distant organs due to high cell motility, allowing cell migration to lymphatic vessels and venules.

Fibroblast rejuvenation by mechanical reprogramming and redifferentiation

The mechanical reprogramming of fibroblasts, followed by their redifferentiation into rejuvenated fibroblasts in an optimized 3D collagen matrix, made these cells more contractile and more efficient at synthesizing matrix components including laminin, fibronectin, and collagen-IV. Moreover, the rejuvenated fibroblasts obtained through this approach exhibited a decrease in DNA damage. The rejuvenated fibroblasts derived from this method precisely align into tissue architectures, suggesting its potential application as clinical implants in tissue engineering and regenerative medicine.

Over the course of the aging process, fibroblasts lose contractility, leading to reduced connective-tissue stiffness. A promising therapeutic avenue for functional rejuvenation of connective tissue is reprogrammed fibroblast replacement, although major hurdles still remain. Toward this, we recently demonstrated that the laterally confined growth of fibroblasts on micropatterned substrates induces stem-cell-like spheroids. In this study, we embedded these partially reprogrammed spheroids in collagen-I matrices of varying densities, mimicking different three-dimensional (3D) tissue constraints. In response to such matrix constraints, these spheroids regained their fibroblastic properties and sprouted to form 3D connective-tissue networks. Interestingly, we found that these differentiated fibroblasts exhibit reduced DNA damage, enhanced cytoskeletal gene expression, and actomyosin contractility. In addition, the rejuvenated fibroblasts show increased matrix protein (fibronectin and laminin) deposition and collagen remodeling compared to the parental fibroblast tissue network. Furthermore, we show that the partially reprogrammed cells have comparatively open chromatin compaction states and may be more poised to redifferentiate into contractile fibroblasts in 3D-collagen matrix. Collectively, our results highlight efficient fibroblast rejuvenation through laterally confined reprogramming, which has important implications in regenerative medicine.

Impact of PDMS surface treatment in cell-mechanics applications

As a widely used elastomer in cell mechanics studies, PDMS is exposed to a variety of surface treatments during cell culture preparation. Considering its viscoelastic nature in particular, effects of the aforementioned treatments on PDMS mechanical behaviour, especially at the relevant length scale of 100 μm, received limited attention. This is despite the fact that significant errors were reported in the quantification of cellular traction forces as a result of minute changes in PDMS mechanical properties. Hence, the effects of plasma oxidation, sterilization and incubation on PDMS modulus of elasticity, relaxation modulus and Poisson's ratio are studied here through tension and stress relaxation tests, with the results of the latter interpreted via the linear viscoelastic formulation. It is observed that although significant deviations from the properties of untreated PDMS are measured through this cycle of surface treatment, properties of untreated PDMS are almost recovered following incubation in cell medium. For example, the modulus of elasticity of treated PDMS was found to be 6% smaller than that of the untreated PDMS. The corresponding deviation was <3% and <1% for the relaxation modulus and time-averaged Poisson's ratio, respectively. The rate of change of the Poisson's ratio with time was also found to be reduced at the end of incubation process in cell medium. As a result, viscoelastic properties of untreated PDMS can safely be used within the error margins provided by this work.

Mechanical stress-induced autophagic response: A cancer-enabling characteristic?

Metastasis is the leading cause of cancer mortality. Throughout the cascade of metastasis, cancer cells are exposed to both chemical and mechanical cues which influence their migratory behavior and survival. Mechanical forces in the milieu of cancer may arise due to excessive growth of cells in a confinement as in case of solid tumors, interstitial flows within tumors and due to blood flow in the vasculature as in case of circulating tumor cells. The focus of this review is to highlight the mechanical forces prevalent in the cancer microenvironment and discuss the impact of mechanical stresses on cancer progression, with special focus on mechanically induced autophagic response in cancer cells. Autophagy is a cellular homeostatic mechanism that a cell employs not only for recycling of damaged organelles and turnover of proteins involved in cellular migration but also as an adaptive response to survive through unfavourable stresses. Elucidation of the role of mechanically triggered autophagic response may lead to a better understanding of the mechanobiological aspects of metastatic cancer and unravelling the associated signaling mechanochemical pathways may hint at potential therapeutic targets.

Traction microscopy with integrated microfluidics: responses of the multi-cellular island to gradients of HGF

Collective cellular migration plays a central role in development, regeneration, and metastasis. In these processes, mechanical interactions between cells are fundamental but measurement of these interactions is often hampered by technical limitations. To overcome some of these limitations, here we describe a system that integrates microfluidics with traction microscopy (TM). Using this system we can measure simultaneously, and in real time, migration speeds, tractions, and intercellular tension throughout an island of confluent Madin-Darby canine kidney (MDCK) cells. The cell island is exposed to hepatocyte growth factor (HGF) at a controlled gradient of concentrations; HGF is known to elicit epithelial-to-mesenchymal transition (EMT) and cell scattering. As expected, the rate of expansion of the cell island was dependent on the concentration of HGF. Higher concentrations of HGF reduced intercellular tensions, as expected during EMT. A novel finding, however, is that the effects of HGF concentration and its gradient were seen within an island. This integrated experimental system thus provides an integrated tool to better understand cellular forces during collective cellular migration under chemical gradients.

Human blood platelets contract in perpendicular direction to shear flow

In their physiological environment, blood platelets are permanently exposed to shear forces caused by blood flow. Within this surrounding, they generate contractile forces that eventually lead to a compaction of the blood clot. Here, we present a microfluidic chamber that combines hydrogel-based traction force microscopy with a controlled shear environment, and investigate the force fields platelets generate when exposed to shear flow in a spatio-temporally resolved manner. We find that for shear rates between 14 s-1 to 33 s-1, the general contraction behavior in terms of force distribution and magnitude does not differ from no-flow conditions. The main direction of contraction, however, does respond to the externally applied stress. At high shear stress, we observe an angle of about 90° between flow direction and main contraction axis. We explain this observation by the distribution of the stress acting on the adherent cell: the observed angle provides the most stable situation for the cell experiencing the shear flow, as supported by a finite element method simulation of the stresses along the platelet boundary.

Quantifying the mechanics of locomotion of the schistosome pathogen with respect to changes in its physical environment

Schistosomiasis is a chronic and morbid disease of poverty affecting approximately 200 million people worldwide. Mature schistosome flatworms wander in the host's hepatic portal and mesenteric venous system where they encounter a range of blood flow conditions and geometrical confinement. However, the mechanisms that support schistosome locomotion and underlie the pathogen's adaptation to its physical environment are largely unknown. By combining microfabrication and traction force microscopy, we developed various in vitro assays to quantify the mechanics of locomotion of adult male Schistosoma mansoni in different physiologically relevant conditions. We show that in unconfined settings, the parasite undergoes two-anchor marching mediated by the coordinated action of its oral and ventral suckers. This mode of locomotion is maintained when the worm faces an external flow, to which it responds by adjusting the strength of its suckers. In geometrically confined conditions, S. mansoni switches to a different crawling modality by generating retrograde peristaltic waves along its body, a mechanism shared with terrestrial and marine worms. However, while the surface of most worms has backward-pointing bristles that rectify peristaltic waves and facilitate forward locomotion, S. mansoni has isotropically oriented tubercles. This requires tight coordination between muscle contraction and substrate friction but gives S. mansoni the ability to reverse its direction of locomotion without turning its body, which is likely advantageous to manoeuvre in narrow-bore vessels. We show that the parasite can also coordinate the action of its suckers with its peristaltic body contractions to increase crawling speed. Throughout this study, we report on a number of biomechanical parameters to quantify the motility of adult schistosomes (e.g. sucker grabbing strength, the rate of detachment under flow, peristaltic wave properties and traction stresses). The new series of in vitro assays make it possible to quantify key phenotypical aspects of S. mansoni motility that could guide the discovery of new drugs to treat schistosomiasis.

Biomimetic pulsatile flows through flexible microfluidic conduits

We bring out unique aspects of the pulsatile flow of a blood analog fluid (Xanthan gum solution) in a biomimetic microfluidic channel. Pressure waveforms that mimic biologically consistent pulsations are applied on physiologically relevant cylindrical microchannels fabricated using polydimethylsiloxane. The in vivo features of the relevant waveforms like peak amplitude and dicrotic notch are reproduced in vitro. The deformation profiles exhibit viscoelastic behavior toward the end of each cycle. Further, the time-varying velocity profiles are critically analyzed. The local hydrodynamics within the microchannel is found to be more significantly affected by pressure waveform rather than the actual wall deformation and the velocity profile. These results are likely to bear far-reaching implications for assessing micro-circulatory dynamics in lab on a chip based microfluidic platforms that to a large extent replicate physiologically relevant conditions.

Magneto-active substrates for local mechanical stimulation of living cells

Cells are able to sense and react to their physical environment by translating a mechanical cue into an intracellular biochemical signal that triggers biological and mechanical responses. This process, called mechanotransduction, controls essential cellular functions such as proliferation and migration. The cellular response to an external mechanical stimulation has been investigated with various static and dynamic systems, so far limited to global deformations or to local stimulation through discrete substrates. To apply local and dynamic mechanical constraints at the single cell scale through a continuous surface, we have developed and modelled magneto-active substrates made of magnetic micro-pillars embedded in an elastomer. Constrained and unconstrained substrates are analysed to map surface stress resulting from the magnetic actuation of the micro-pillars and the adherent cells. These substrates have a rigidity in the range of cell matrices, and the magnetic micro-pillars generate local forces in the range of cellular forces, both in traction and compression. As an application, we followed the protrusive activity of cells subjected to dynamic stimulations. Our magneto-active substrates thus represent a new tool to study mechanotransduction in single cells, and complement existing techniques by exerting a local and dynamic stimulation, traction and compression, through a continuous soft substrate.

Unveiling the Self-Assembling Behavior of 5-Fluorouracil and its N,N'-Dimethyl Derivative: A Spectroscopic and Microscopic Approach

Under physiological conditions, 5-fluorouracil (5-FU), an anticancer drug, self-assembles into fibrils by strong hydrogen-bonding network, whereas its N,N'-dimethyl derivative, 5-fluoro-1,3-dimethyluracil (5-FDMU), does not make fibrils due to lack of strong hydrogen-bonding motif. In vitro, 5-FU self-assembly is sensitive to physicochemical conditions like the pH and ionic strength of the solution, which tune the strength of the noncovalent driving forces. Here we report a surprising finding that the buffer, which is necessary to control the pH and is typically considered to be inert, also significantly influences 5-FU self-assembly, which indicates an important role of counterions in the fibril formation. We have also monitored concentration- and time-dependent fibrillar growth of 5-FU. Again, fibril growth process is probed under dynamic conditions using microfluidic platform. The self-assembly of 5-FU compared with its N,N'-dimethyl derivative shows lower cytotoxicity to the cultured human erythroleukemic cells (K562 cells), which plausibly states the reason behind the greater effectiveness of 5-FU derivative drugs than 5-FU itself.

Nanomechanically Visualizing Drug-Cell Interaction at the Early Stage of Chemotherapy

A detailed understanding of chemotherapy is determined by the response of cell to the formation of the drug-target complex and its corresponding sudden or eventual cell death. However, visualization of this early but important process, encompassing the fast dynamics as well as complex network of molecular pathways, remains challenging. Herein, we report that the nanomechanical traction force is sensitive enough to reflect the early cellular response upon the addition of chemotherapeutical molecules in a real-time and noninvasive manner, due to interactions between chemotherapeutic drug and its cytoskeleton targets. This strategy has outperformed the traditional cell viability, cell cycle, cell impendence as well as intracellular protein analyses, in terms of fast response. Furthermore, by using the nanomechanical traction force as a nanoscale biophysical marker, we discover a cellular nanomechanical change upon drug treatment in a fast and sensitive manner. Overall, this approach could help to reveal the hidden mechanistic steps in chemotherapy and provide useful insights in drug screening.

Stretchable impedance sensor for mammalian cell proliferation measurements

This paper presents the fabrication and testing of a novel stretchable electric cell-substrate impedance sensing (ECIS) lab on a chip device. This is the first time that ECIS electrodes were fabricated on a stretchable polydimethylsiloxane (PDMS) substrate and ECIS measurements were performed on mammalian cells exposed to cyclic strain. The stretchable ECIS biosensors simulate in vitro the dynamic environment of organisms, such as pulsation, bending and stretching, which enables investigations on cell behavior that undergoes mechanical stimuli in biological tissue. Usually cell-based assays used in cell mechanobiology rely on endpoint cell tests, which provide a limited view on dynamic cellular mechanisms. The ECIS technique is a label-free, real-time and noninvasive method to monitor the cellular response to mechanical stimuli. Bovine aortic endothelial cells (BAECs) have been used in this research because the BAECs are exposed in vivo to cyclic physiologic elongation produced by blood circulation in the arteries. These innovative stretchable ECIS biosensors were used to analyze the proliferation of BAECs under different cyclic mechanical stimulations. The results of fluorescence based cell proliferation assays confirmed that the stretchable ECIS sensors were able to analyze in real-time the BAEC proliferation. The novel stretchable ECIS sensor has the ability to analyse cell proliferation, determine the cell number and density, and apply mechanical stimulation at the same time.

Nanonet Force Microscopy for Measuring Cell Forces

The influence of physical forces exerted by or felt by cells on cell shape, migration, and cytoskeleton arrangement is now widely acknowledged and hypothesized to occur due to modulation of cellular inside-out forces in response to changes in the external fibrous environment (outside-in). Our previous work using the non-electrospinning Spinneret-based Tunable Engineered Parameters' suspended fibers has revealed that cells are able to sense and respond to changes in fiber curvature and structural stiffness as evidenced by alterations to focal adhesion cluster lengths. Here, we present the development and application of a suspended nanonet platform for measuring C2C12 mouse myoblast forces attached to fibers of three diameters (250, 400, and 800 nm) representing a wide range of structural stiffness (3-50 nN/μm). The nanonet force microscopy platform measures cell adhesion forces in response to symmetric and asymmetric external perturbation in single and cyclic modes. We find that contractility-based, inside-out forces are evenly distributed at the edges of the cell, and that forces are dependent on fiber structural stiffness. Additionally, external perturbation in symmetric and asymmetric modes biases cell-fiber failure location without affecting the outside-in forces of cell-fiber adhesion. We then extend the platform to measure forces of (1) cell-cell junctions, (2) single cells undergoing cyclic perturbation in the presence of drugs, and (3) cancerous single-cells transitioning from a blebbing to a pseudopodial morphology.

Analysis of Calcium Transients and Uniaxial Contraction Force in Single Human Embryonic Stem Cell-Derived Cardiomyocytes on Microstructured Elastic Substrate with Spatially Controlled Surface Chemistries

The mechanical activity of cardiomyocytes is the result of a process called excitation-contraction coupling (ECC). A membrane depolarization wave induces a transient cytosolic calcium concentration increase that triggers activation of calcium-sensitive contractile proteins, leading to cell contraction and force generation. An experimental setup capable of acquiring simultaneously all ECC features would have an enormous impact on cardiac drug development and disease study. In this work, we develop a microengineered elastomeric substrate with tailor-made surface chemistry to measure simultaneously the uniaxial contraction force and the calcium transients generated by single human cardiomyocytes in vitro. Microreplication followed by photocuring is used to generate an array consisting of elastomeric micropillars. A second photochemical process is employed to spatially control the surface chemistry of the elastomeric pillar. As result, human embryonic stem cell-derived cardiomyocytes (hESC-CMs) can be confined in rectangular cell-adhesive areas, which induce cell elongation and promote suspended cell anchoring between two adjacent micropillars. In this end-to-end conformation, confocal fluorescence microscopy allows simultaneous detection of calcium transients and micropillar deflection induced by a single-cell uniaxial contraction force. Computational finite elements modeling (FEM) and 3D reconstruction of the cell-pillar interface allow force quantification. The platform is used to follow calcium dynamics and contraction force evolution in hESC-CMs cultures over the course of several weeks. Our results show how a biomaterial-based platform can be a versatile tool for in vitro assaying of cardiac functional properties of single-cell human cardiomyocytes, with applications in both in vitro developmental studies and drug screening on cardiac cultures.

Electrotaxis Studies of Lung Cancer Cells using a Multichannel Dual-electric-field Microfluidic Chip

The behavior of directional cell migration under a direct current electric-field (dcEF) is referred to as electrotaxis. The significant role of physiological dcEF in guiding cell movement during embryo development, cell differentiation, and wound healing has been demonstrated in many studies. By applying microfluidic chips to an electrotaxis assay, the investigation process is shortened and experimental errors are minimized. In recent years, microfluidic devices made of polymeric substances (e.g., polymethylmethacrylate, PMMA, or acrylic) or polydimethylsiloxane (PDMS) have been widely used in studying the responses of cells to electrical stimulation. However, unlike the numerous steps required to fabricate a PDMS device, the simple and rapid construction of the acrylic microfluidic chip makes it suitable for both device prototyping and production. Yet none of the reported devices facilitate the efficient study of the simultaneous chemical and dcEF effects on cells. In this report, we describe our design and fabrication of an acrylic-based multichannel dual-electric-field (MDF) chip to investigate the concurrent effect of chemical and electrical stimulation on lung cancer cells. The MDF chip provides eight combinations of electrical/chemical stimulations in a single test. The chip not only greatly shortens the required experimental time but also increases accuracy in electrotaxis studies.

Review of cellular mechanotransduction on micropost substrates

As physical entities, living cells can sense and respond to various stimulations within and outside the body through cellular mechanotransduction. Any deviation in cellular mechanotransduction will not only undermine the orchestrated regulation of mechanical responses, but also lead to the breakdown of their physiological function. Therefore, a quantitative study of cellular mechanotransduction needs to be conducted both in experiments and in computational simulations to investigate the underlying mechanisms of cellular mechanotransduction. In this review, we present an overview of the current knowledge and significant progress in cellular mechanotransduction via micropost substrates. In the aspect of experimental studies, we summarize significant experimental progress and place an emphasis on the coupled relationship among cellular spreading, focal adhesion and contractility as well as the influence of substrate properties on force-involved cellular behaviors. In the other aspect of computational investigations, we outline a coupled framework including the biochemically motivated stress fiber model and thermodynamically motivated adhesion model and present their predicted biomechanical responses and then compare predicted simulation results with experimental observations to further explore the mechanisms of cellular mechanotransduction. At last, we discuss the future perspectives both in experimental technologies and in computational models, as well as facing challenges in the area of cellular mechanotransduction.

A microfluidic pipette array for mechanophenotyping of cancer cells and mechanical gating of mechanosensitive channels

Micropipette aspiration measures the mechanical properties of single cells. A traditional micropipette aspiration system requires a bulky infrastructure and has a low throughput and limited potential for automation. We have developed a simple microfluidic device which is able to trap and apply pressure to single cells in designated aspiration arrays. By changing the volume flow rate using a syringe pump, we can accurately exert a pressure difference across the trapped cells for pipette aspiration. By examining cell deformation and protrusion length into the pipette under an optical microscope, several important cell mechanical properties, such as the cortical tension and the Young's modulus, can be measured quantitatively using automated image analysis. Using the microfluidic pipette array, the stiffness of breast cancer cells and healthy breast epithelial cells was measured and compared. Finally, we applied our device to examine the gating threshold of the mechanosensitive channel MscL expressed in mammalian cells. Together, the development of a microfluidic pipette array could enable rapid mechanophenotyping of individual cells and for mechanotransduction studies.

On-chip lectin microarray for glycoprofiling of different gastritis types and gastric cancer

An on-chip lectin microarray based glycomic approach is employed to identify glyco markers for different gastritis and gastric cancer. Changes in protein glycosylation have impact on biological function and carcinogenesis. These altered glycosylation patterns in serum proteins and membrane proteins of tumor cells can be unique markers of cancer progression and hence have been exploited to diagnose various stages of cancer through lectin microarray technology. In the present work, we aimed to study the alteration of glycan structure itself in different stages of gastritis and gastric cancer thoroughly. In order to perform the study from both serum and tissue glycoproteins in an efficient and high-throughput manner, we indigenously developed and employed lectin microarray integrated on a microfluidic lab-on-a-chip platform. We analyzed serum and gastric biopsy samples from 8 normal, 15 chronic Type-B gastritis, 10 chronic Type-C gastritis, and 6 gastric adenocarcinoma patients and found that the glycoprofile obtained from tissue samples was more distinctive than that of the sera samples. We were able to establish signature glycoprofile for the three disease groups, that were absent in healthy normal individuals. In addition, our findings elucidated certain novel signature glycan expression in chronic gastritis and gastric cancer. In silico analysis showed that glycoprofile of chronic gastritis and gastric adenocarcinoma formed close clusters, confirming the previously hypothesized linkage between them. This signature can be explored further as gastric cancer marker to develop novel analytical tools and obtain in-depth understanding of the disease prognosis.

Modeling crawling cell movement on soft engineered substrates

Self-propelled motion, emerging spontaneously or in response to external cues, is a hallmark of living organisms. Systems of self-propelled synthetic particles are also relevant for multiple applications, from targeted drug delivery to the design of self-healing materials. Self-propulsion relies on the force transfer to the surrounding. While self-propelled swimming in the bulk of liquids is fairly well characterized, many open questions remain in our understanding of self-propelled motion along substrates, such as in the case of crawling cells or related biomimetic objects. How is the force transfer organized and how does it interplay with the deformability of the moving object and the substrate? How do the spatially dependent traction distribution and adhesion dynamics give rise to complex cell behavior? How can we engineer a specific cell response on synthetic compliant substrates? Here we generalize our recently developed model for a crawling cell by incorporating locally resolved traction forces and substrate deformations. The model captures the generic structure of the traction force distribution and faithfully reproduces experimental observations, like the response of a cell on a gradient in substrate elasticity (durotaxis). It also exhibits complex modes of cell movement such as "bipedal" motion. Our work may guide experiments on cell traction force microscopy and substrate-based cell sorting and can be helpful for the design of biomimetic "crawlers" and active and reconfigurable self-healing materials.

Oscillatory shear stress induced calcium flickers in osteoblast cells

The dynamic physical microenvironment of bone affects the activity of osteoblast cells, yet little is known about how osteoblast mechanotransduction depends on different features of a dynamic stimulus. Here we investigated the effect of physiologically relevant oscillatory flow shear stress on the calcium mobility in osteoblast cells within a microfluidic platform that mimics the confined environment of bone matrix. We characterized the spatiotemporal evolution of intracellular calcium 'flickers', an important signature of cell activation, in response to steady, pulsatile, and oscillatory shear stress. We found that oscillatory flow induces surprisingly higher flicker activity than other flow types. We could further attribute this phenomenon to the opening of a stretch activated ion channel, namely TRPM7. We also found that localization of TRPM7 within the cholesterol-enriched lipid raft domains of plasma membranes is essential for its activity. Collectively our findings elucidated a candidate mechanism for the flow mediated stimulation of osteoblast cells. They therefore have implications towards unveiling various facets of bone formation and remodelling in healthy and diseased conditions, including bone-metastasis of various cancer types, diabetes, and inflammatory autoimmune diseases.

Fluid flow stress induced contraction and re-spread of mesenchymal stem cells: a microfluidic study

Mesenchymal stem cells (MSCs), the multipotent progenitor cells, are sensitive to fluid shear stress (FSS). MSCs can migrate through the blood stream by intravasation into the circulatory system to transfer to distant positions through the blood stream. During the transferring process, MSCs may differentiate into cells of corresponding tissues for repair, or remain undifferentiated and initiate ectopic tissue formation, lipid accumulation, or calcification, which are closely related to the pathology of atherosclerosis. However, how the MSCs sense and respond to vascular FSS stimulation and lead to subsequent biological effects remains elusive. In this study, by using an in situ time-lapse microfluidic cell culture and observation system, we found that rat mesenchymal stem cells (rMSCs) presented a contraction and re-spread (CRS) process when they were initially subjected to a physiological FSS (1.3 Pa). Our subsequent studies demonstrated that integrin and cilia played key roles in sensing FSS. Calcium, F-actin, and Rho-kinase were key molecules in the mechanotransduction of the CRS of the rMSCs. Our study revealed the immediate response of the rMSCs to FSS. It will be helpful for the understanding of MSC-related tissue repair and the role of MSCs in the initiation of atherosclerosis.

Force field evolution during human blood platelet activation

Contraction at the cellular level is vital for living organisms. The most prominent type of contractile cells are heart muscle cells, a less-well-known example is blood platelets. Blood platelets activate and interlink at injured blood vessel sites, finally contracting to form a compact blood clot. They are ideal model cells to study the mechanisms of cellular contraction, as they are simple, having no nucleus, and their activation can be triggered and synchronized by the addition of thrombin. We have studied contraction using human blood platelets, employing traction force microscopy, a single-cell technique that enables time-resolved measurements of cellular forces on soft substrates with elasticities in the physiological range (∼4 kPa). We found that platelet contraction reaches a steady state after 25 min with total forces of ∼34 nN. These forces are considerably larger than what was previously reported for platelets in aggregates, demonstrating the importance of a single-cell approach for studies of platelet contraction. Compared with other contractile cells, we find that platelets are unique, because force fields are nearly isotropic, with forces pointing toward the center of the cell area.

Enhancement of static incubation time in microfluidic cell culture platforms exploiting extended air-liquid interface

Microfluidics based cell culture applications have facilitated the study of cellular dynamics at the single entity level. Yet, long term versions of such applications in a static framework suffer from the fast exhaustion of available oxygen, dissolved in the limited media volume available per cell, within the microconfined environment. In order to circumvent such drawbacks, we have improvised a microfluidic cell culture platform for prolonged sustenance of adherent mammalian cells by formation of an air-liquid interface through functionalizing inner surfaces of a polydimethylsiloxane (PDMS) based microdevice. We have demonstrated an augmented static incubation time for different cell lines using this approach.

Effect of fluidic transport on the reaction kinetics in lectin microarrays

Lectins are the proteins which can distinguish glycosylation patterns. They are frequently used as biomarkers for progressions of several diseases including cancer. As the lectin microarray based prognosis devices miniaturize the process of glycoprofiling, it is anticipated that their performance can be augmented by integration with microfluidic framework. This is analogous to microfluidics based DNA arrays. However, unlike small oligonucleotide microarrays, it remains uncertain whether the binding reaction-kinetic parameters can be considered invariant of imposed hydrodynamics, for relatively larger and structure sensitive molecules such as lectins. Here we show, using two standard lectins namely Concanavalin A and Abrus Agglutinin, that the steady state binding efficiency unexpectedly declines beyond a critical shear rate magnitude. This observation can be explained only if the associated reaction constants are presumed to be functions of hydrodynamic parameters. We methodically deduce the shear rate dependence of association and dissociation constants from the comparison of experimental and model-simulation trends. The aforementioned phenomena are perceived to be the consequences of strong hydrodynamic perturbations, culminating into molecular structural distortion. The exploration, therefore, reveals a unique coupling between reaction kinetics and hydrodynamics for biomacromolecules and provides a generic scheme towards futuristic microfluidics-coupled biomedical assays.

Application of sensing techniques to cellular force measurement

Cell traction forces (CTFs) are the forces produced by cells and exerted on extracellular matrix or an underlying substrate. CTFs function to maintain cell shape, enable cell migration, and generate and detect mechanical signals. As such, they play a vital role in many fundamental biological processes, including angiogenesis, inflammation, and wound healing. Therefore, a close examination of CTFs can enable better understanding of the cellular and molecular mechanisms of such processes. To this end, various force-sensing techniques for CTF measurement have been developed over the years. This article will provide a concise review of these sensing techniques and comment on the needs for improved force-sensing technologies for cell mechanics and biology research.

A micro-incubator for cell and tissue imaging

A low-cost micro-incubator for imaging dynamic processes in living cells and tissues has been developed. This micro-incubator provides a tunable environment that can be altered to study responses of cell monolayers for several days as well as relatively thick tissue samples and tissue-engineered epithelial tissues in experiments lasting several hours. Samples are contained in a sterile cavity closed by a gas-permeable membrane. The incubator can be positioned in any direction and used on an inverted or upright microscope. Temperature is regulated using a Peltier module controlled by a sensor positioned close to the sample, enabling compensation for any changes in temperature. Rapid changes in a sample's surrounding environment can be achieved due to the fast response of the Peltier module. These features permit monitoring of sample adaptation to induced environmental changes.

Bio-Microfluidics: Overview

With a view to establish unique interfacial synergistic interactions between two seemingly distant fields of microfluidics and biology, Bio-microfluidics has become a progressive arena of research in recent times. Bio-microfluidic tools in the format of lab-on-a-chip devices have been extensively utilized to uncouth hitherto un-illuminated regions of cellular-molecular biology, biotechnology and biomedical engineering. This chapter elaborately delineates the linking between the fundamental microscale physics and biologically relevant physico-chemical events and how, in practice, these relations are exploited in microfluidic devices. Finally, potential directions of future biomicrofluidic research are also discussed.

Fibroblasts and myofibroblasts in wound healing: force generation and measurement

Fibroblasts are one of the most abundant cell types in connective tissues. These cells are responsible for tissue homeostasis under normal physiological conditions. When tissues are injured, fibroblasts become activated and differentiate into myofibroblasts, which generate large contractions and actively produce extracellular matrix (ECM) proteins to facilitate wound closure. Both fibroblasts and myofibroblasts play a critical role in wound healing by generating traction and contractile forces, respectively, to enhance wound contraction. This review focuses on the mechanisms of force generation in fibroblasts and myofibroblasts and techniques for measuring such cellular forces. Such a topic was chosen specifically because of the dual effects that fibroblasts/myofibroblasts have in wound healing process- a suitable amount of force generation and matrix deposition is beneficial for wound healing; excessive force and matrix production, however, result in tissue scarring and even malfunction of repaired tissues. Therefore, understanding how forces are generated in these cells and knowing exactly how much force they produce may guide the development of optimal protocols for more effective treatment of tissue wounds in clinical settings.

Monodisperse semi-permeable microcapsules for continuous observation of cells

We present a method for forming monodisperse semi-permeable microcapsules composed of an alginate-poly-L-lysine (PLL) membrane for the observation of encapsulated cells. These microcapsules were prepared with a monolithic three-dimensional microfluidic axisymmetric flow-focusing device by an internal gelation method using glucono-1,5-lactone in order to provide mild conditions for the cells. The microcapsules were sufficiently monodisperse and robust to be trapped in a bead-based microfluidic array system for easy observation. We also confirmed that (i) the alginate-PLL membrane is semi-permeable so that cells and microorganisms cannot pass through it but nutrients and wastes can, (ii) cells are able to move freely inside the semi-permeable microcapsules, and (iii) cells can be successfully proliferated in the microcapsules.

Critical stresses for cancer cell detachment in microchannels

We present experiments involving cancer cells adhering to microchannels, subjected to increasing shear stresses (0.1-30 Pa). Morphological studies were carried out at different shear stresses. Cells exhibit spreading patterns similar to those observed under static conditions, as long as the shear stress is not too high. At critical wall shear stresses (around 2-5 Pa), cell-substrate contact area decreases until detachment at the larger stresses. Critical shear stresses are found to be lower for higher confinements (i.e. smaller cell height to channel height ratio). Fluorescent techniques were used to locate focal adhesions (typically 1 lm(2) in size) under various shearing conditions, showing that cells increase the number of focal contacts in the region facing the flow. To analyze such data, we propose a model to determine the critical stress, resulting from the competition between hydrodynamic forces and the adhesive cell resistance. With this model, typical adhesive stresses exerted at each focal contact can be determined and are in agreement with previous works.