One-component, switchable ionic liquids derived from siloxylated amines

Introducing the Reversible Reaction of CO2 with Diamines into Nonisocyanate Polyurethane Synthesis

Nonisocyanate polyurethanes (NIPUs) are considered greener alternatives to traditional polyurethanes, and the preparation of NIPUs considerably depends on the design and synthesis of suitable monomers. Herein, we propose a toolbox for in situ capturing and conversion of CO2 into α,ω-diene-functionalized carbamate monomers by taking advantage of the facile reversible reaction of CO2 with diamines in the presence of organic superbases. The activation of CO2 into carbamate intermedia was demonstrated by NMR and in situ FTIR, and the optimal conditions to prepare α,ω-diene-functionalized carbamate monomers were established. Thiol-ene and acyclic diene metathesis (ADMET) polymerization of these monomers under mild conditions yielded a series of poly(thioether urethane)s and unsaturated aromatic-aliphatic polyurethanes with high yield and glass transition temperatures ranging from -26.8 to -1.1 °C. These obtained NIPUs could be further modified via postpolymerization oxidation or hydrogenation to yield poly(sulfone urethane) and saturated polyurethane with tunable properties.

Advanced Theory and Simulation to Guide the Development of CO2 Capture Solvents

Increasing atmospheric concentrations of greenhouse gases due to industrial activity have led to concerning levels of global warming. Reducing carbon dioxide (CO₂) emissions, one of the main contributors to the greenhouse effect, is key to mitigating further warming and its negative effects on the planet. CO₂ capture solvent systems are currently the only available technology deployable at scales commensurate with industrial processes. Nonetheless, designing these solvents for a given application is a daunting task requiring the optimization of both thermodynamic and transport properties. Here, we discuss the use of atomic scale modeling for computing reaction energetics and transport properties of these chemically complex solvents. Theoretical studies have shown that in many cases, one is dealing with a rich ensemble of chemical species in a coupled equilibrium that is often difficult to characterize and quantify by experiment alone. As a result, solvent design is a balancing act between multiple parameters which have optimal zones of effectiveness depending on the operating conditions of the application. Simulation of reaction mechanisms has shown that CO₂ binding and proton transfer reactions create chemical equilibrium between multiple species and that the agglomeration of resulting ions and zwitterions can have profound effects on bulk solvent properties such as viscosity. This is balanced against the solvent systems needing to perform different functions (e.g., CO₂ uptake and release) depending on the thermodynamic conditions (e.g., temperature and pressure swings). The latter constraint imposes a "Goldilocks" range of effective parameters, such as binding enthalpy and pK _a, which need to be tuned at the molecular level. The resulting picture is that solvent development requires an integrated approach where theory and simulation can provide the necessary ingredients to balance competing factors.

Amphilic Water-Lean Carbon Capture Solvent Wetting Behavior through Decomposition by Stainless-Steel Interfaces

A combined experimental and theoretical study has been carried out on the wetting and reactivity of water-lean carbon capture solvents on the surface of common column packing materials. Paradoxically, these solvents are found to be equally able to wet hydrophobic and hydrophilic surfaces. The solvents are amphiphilic and can adapt to any interfacial environment, owing to their inherent heterogeneous (nonionic/ionic) molecular structure. Ab initio molecular dynamics indicates that these structures enable the formation of a strong adlayer on the surface of hydrophilic surfaces like oxidized steel which promotes solvent decomposition akin to hydrolysis from surface oxides and hydroxides. This decomposition passivates the surface, making it effectively hydrophobic, and the decomposed solvent promotes leaching of the iron into the bulk fluid. This study links the wetting behavior to the observed corrosion of the steels by decomposition of solvent at steel interfaces. The overall affect is strongly dependent on the chemical composition of the solvent in that amines are stable, whereas imines and alcohols are not. Moreover, plastic packing shows little to no solvent degradation, but an equal degree of wetting.

Subtle changes in hydrogen bond orientation result in glassification of carbon capture solvents

Water-lean CO₂ capture solvents show promise for more efficient and cost-effective CO₂ capture, although their long-term behavior in operation has yet to be well studied. New observations of extended structure solvent behavior show that some solvent formulations transform into a glass-like phase upon aging at operating temperatures after contact with CO₂. The glassification of a solvent would be detrimental to a carbon-capture process due to plugging of infrastructure, introducing a critical need to decipher the underlying principles of this phenomenon to prevent it from happening. We present the first integrated theoretical and experimental study to characterize the nano-structure of metastable and glassy states of an archetypal single-component alkanolguanidine carbon-capture solvent and assess how minute changes in atomic-level interactions convert the solvent between metastable and glass-like states. Small-angle neutron scattering and neutron diffraction coupled with small- and wide-angle X-ray scattering analysis demonstrate that minute structural changes in solution precipitae reversible aggregation of zwitterionic alkylcarbonate clusters in solution. Our findings indicate that our test system, an alkanolguanidine, exhibits a first-order phase transition, similar to a glass transition, at approximately 40 °C-close to the operating absorption temperature for post-combustion CO₂ capture processes. We anticipate that these phenomena are not specific to this system, but are present in other classes of colvents as well. We discuss how molecular-level interactions can have vast implications for solvent-based carbon-capture technologies, concluding that fortunately in this case, glassification of water-lean solvents can be avoided as long as the solvent is run above its glass transition temperature.

Development of High-Capacity and Water-Lean CO2 Absorbents by a Concise Molecular Design Strategy through Viscosity Control

The exponentially increasing viscosity of water-lean CO₂ absorbents during carbon capture processes is a critical problem for practical application, owing to its strong correlation with systems' mass transfer properties, as well as convenience of transportation. In this work, a concise strategy based on structure-viscosity relationships is proposed and applied to construct a series of functionalized ethylenediamines as single-component absorbents for post-combustion CO₂ capture. These nonaqueous absorbents have outstanding viscosities (50-200 cP, 25 °C) at their maximal CO₂ capacities (up to 22 wt % or 4.92 mol kg^-1 , 1 bar), and are readily regenerated at low temperatures (50-80 °C) under ambient pressure. Additional capture of CO₂ through physisorption could also be achieved by operating at high pressures. The CO₂ capture and release process is systematically investigated by means of ¹³ C NMR spectroscopy, differential scanning calorimetry (DSC), in situ FTIR analysis, and density functional theory (DFT) calculations, which could provide sufficient spectroscopic details to reveal the ease of reversibility and enable rational interpretation of the absorption mechanism.

Stone/Coating Interaction and Durability of Si-Based Photocatalytic Nanocomposites Applied to Porous Lithotypes

The use of hybrid nanocoatings for the protection of natural stones has received increasing attention over the last years. However, the interaction of these materials with stones and, in particular, its modification resulting from the blending of nanoparticles and matrices, are yet little explored. In this work, the interaction of two nanocomposite coatings (based on alkylalkoxysilane matrices and TiO₂ nanoparticles in water and 2-propanol) with two different porous stones is examined in detail by comparing their absorption behaviour and protection performance with those of the respective TiO₂-free matrices. It is shown that the protective effectiveness of both matrices is not negatively affected by the presence of TiO₂, as the desired water barrier effect is retained, while a significant photocatalytic activity is achieved. The addition of titania leads to a partial aggregation of the water-based matrix and accordingly reduces the product penetration into stones. On the positive side, a chemical interaction between titania and this matrix is observed, probably resulting in a greater stability of nanoparticles inside the protective coating. Moreover, although an effect of TiO₂ on the chemical stability of matrices is observed upon UV light exposure, the protective performance of coatings is substantially maintained after ageing, while the interaction between matrices and nanoparticles results in a good retention of the latter upon in-lab simulated rain wash-out.

Switchable polarity solvents for preconcentration and simultaneous determination of amino acids in human plasma samples

The application of a mixture of amidine and alcohol as a switchable polarity solvent for the microextraction of 19 amino acids in biological samples.

Water-Lean Solvents for Post-Combustion CO2 Capture: Fundamentals, Uncertainties, Opportunities, and Outlook

This review is designed to foster the discussion regarding the viability of postcombustion CO₂ capture by water-lean solvents, by separating fact from fiction for both skeptics and advocates. We highlight the unique physical and thermodynamic properties of notable water-lean solvents, with a discussion of how such properties could translate to efficiency gains compared to aqueous amines. The scope of this review ranges from the purely fundamental molecular-level processes that govern solvent behavior to bench-scale testing, through process engineering and projections of process performance and cost. Key discussions of higher than expected CO₂ mass transfer, water tolerance, and compatibility with current infrastructure are presented along with current limitations and suggested areas where further solvent development is needed. We conclude with an outlook of the status of the field and assess the viability of water-lean solvents for postcombustion CO₂ capture.

Reinventing Design Principles for Developing Low-Viscosity Carbon Dioxide-Binding Organic Liquids for Flue Gas Clean Up

Anthropogenic CO₂ emissions from point sources (e.g., coal fired-power plants) account for the majority of the greenhouse gases in the atmosphere. Water-lean solvent systems such as CO₂ -binding organic liquids (CO₂ BOLs) are being developed to reduce the energy requirement for CO₂ capture. Many water-lean solvents such as CO₂ BOLs are currently limited by the high viscosities of concentrated electrolyte solvents, thus many of these solvents have yet to move toward commercialization. Conventional standard trial-and-error approaches for viscosity reduction, while effective, are time consuming and economically expensive. We rethink the metrics and design principles of low-viscosity CO₂ -capture solvents using a combined synthesis and computational modeling approach. We critically study the effects of viscosity reducing factors such as orientation of hydrogen bonding, introduction of higher degrees of freedom, and cation or anion charge solvation, and assess whether or how each factor affects viscosity of CO₂ BOL CO₂ capture solvents. Ultimately, we found that hydrogen bond orientation and strength is the predominant factor influencing the viscosity in CO₂ BOL solvents. With this knowledge, a new CO₂ BOL variant, 1-MEIPADM-2-BOL, was synthesized and tested, resulting in a solvent that is approximately 60 % less viscous at 25 mol % CO₂ loading than our base compound 1-IPADM-2-BOL. The insights gained from the current study redefine the fundamental concepts and understanding of what influences viscosity in concentrated organic CO₂ -capture solvents.

CO2-responsive polymeric materials: synthesis, self-assembly, and functional applications

CO2 is an ideal trigger for switchable or stimuli-responsive materials because it is benign, inexpensive, green, abundant, and does not accumulate in the system. Many different CO2-responsive materials including polymers, latexes, solvents, solutes, gels, surfactants, and catalysts have been prepared. This review focuses on the preparation, self-assembly, and functional applications of CO2-responsive polymers. Detailed discussion is provided on the synthesis of CO2-responsive polymers, in particular using reversible deactivation radical polymerization (RDRP), formerly known as controlled/living radical polymerization (CLRP), a powerful technique for the preparation of well-defined (co)polymers with precise control over molecular weight distribution, chain-end functional groups, and polymer architectural design. Self-assembly in aqueous dispersed media is highlighted as well as emerging potential applications.

Dynamic Acid/Base Equilibrium in Single Component Switchable Ionic Liquids and Consequences on Viscosity

The deployment of transformational nonaqueous CO2-capture solvent systems is encumbered by high viscosities even at intermediate uptakes. Using single-molecule CO2 binding organic liquids as a prototypical example, we present key molecular features that control bulk viscosity. Fast CO2-uptake kinetics arise from close proximity of the alcohol and amine sites involved in CO2 binding in a concerted fashion, resulting in a Zwitterion containing both an alkyl-carbonate and a protonated amine. The population of internal hydrogen bonds between the two functional groups determines the solution viscosity. Unlike the ion pair interactions in ionic liquids, these observations are novel and specific to a hydrogen-bonding network that can be controlled by chemically tuning single molecule CO2 capture solvents. We present a molecular design strategy to reduce viscosity by shifting the proton transfer equilibrium toward a neutral acid/amine species, as opposed to the ubiquitously accepted zwitterionic state. The molecular design concepts proposed here are readily extensible to other CO2 capture technologies.

Sustainable Chemistry: Reversible reaction of CO2 with amines

The reaction of primary and secondary amines with CO2 has been successfully leveraged to develop sustainable processes. In this article, we review specific examples that use the reversible reaction of CO2 with amines to synergistically enhance reaction and recovery of the products. The three cases of interest highlighted herein are: (i) reversible protection of amines, (ii) reversible ionic liquids for CO2 capture and chemical transformations, and (iii) reversible gels of ethylene diamine. These examples demonstrate that the reversible reaction of amines with CO2 is one of the tools in the sustainable technology’s toolbox.

Structure–function study of tertiary amines as switchable polarity solvents

A series of tertiary amines have been screened for their function as switchable polarity solvents (SPS). The relative ratios of tertiary amine and carbonate species as well as maximum possible concentration were determined. A new form of SPS with an amine : carbonate ratio significantly greater than unity has been identified. The N,N-dimethyl-n-alkylamine structure has been identified as important to the function of an SPS.

Design, synthesis, and evaluation of nonaqueous silylamines for efficient CO2 capture

A series of silylated amines have been synthesized for use as reversible ionic liquids in the application of post-combustion carbon capture. We describe a molecular design process aimed at influencing industrially relevant carbon capture properties, such as viscosity, temperature of reversal, and enthalpy of regeneration, while maximizing the overall CO2 -capture capacity. A strong structure-property relationship among the silylamines is demonstrated in which minor structural modifications lead to significant changes in the bulk properties of the reversible ionic liquid formed from reaction with CO2 .

CO2 Capture from Dilute Gases as a Component of Modern Global Carbon Management

The growing atmospheric CO2 concentration and its impact on climate have motivated widespread research and development aimed at slowing or stemming anthropogenic carbon emissions. Technologies for carbon capture and sequestration (CCS) employing mass separating agents that extract and purify CO2 from flue gas emanating from large point sources such as fossil fuel–fired electricity-generating power plants are under development. Recent advances in solvents, adsorbents, and membranes for postcombust- ion CO2 capture are described here. Specifically, room-temperature ionic liquids, supported amine materials, mixed matrix and facilitated transport membranes, and metal-organic framework materials are highlighted. In addition, the concept of extracting CO2 directly from ambient air (air capture) as a means of reducing the global atmospheric CO2 concentration is reviewed. For both conventional CCS from large point sources and air capture, critical research needs are identified and discussed.

Novel Solvents for Sustainable Production of Specialty Chemicals

We discuss novel solvents that improve the sustainability of various chemical reactions and processes. These alternative solvents include organic-aqueous tunable solvents; near-critical water; switchable piperylene sulfone, a volatile dimethylsulfoxide substitute; and reversible ionic liquids. These solvents are advantageous to a wide variety of reactions because they reduce waste and energy demand by coupling homogeneous reactions with heterogeneous separations, acting as in situ acid or base catalysts, and providing simple and efficient postreaction separations.

Aminosilicone solvents for CO(2) capture

This work describes the first report of the use of an aminosilicone solvent mix for the capture of CO(2). To maintain a liquid state, a hydroxyether co-solvent was employed which allowed enhanced physisorption of CO(2) in the solvent mixture. Regeneration of the capture solvent system was demonstrated over 6 cycles and absorption isotherms indicate a 25-50 % increase in dynamic CO(2) capacity over 30 % MEA. In addition, proof of concept for continuous CO(2) absorption was verified. Additionally, modeling to predict heats of reaction of aminosilicone solvents with CO(2) was in good agreement with experimental results.