Design and characterization of memantine and donepezil loaded 3D scaffolds

Memantine HCl (MEM) and Donepezil HCl (DON) are widely used separately and in combination to treat Alzheimer's disease, and some studies suggest that these drugs may also prevent bone fractures and promote bone regeneration. For this purpose, we formulated fiber-based 3D scaffolds for local delivery of MEM/DON to improve the regeneration process of bone fractures. First, Poly (ε-caprolactone) (PCL)-based MEM/DON-loaded nanofibrous membranes were produced by electrospinning, and then these nanofibrous membranes were transformed into 3D scaffolds using the thermally induced self-agglomeration (TISA) method. Encapsulation efficiency after these two steps was found to be around 20%. Analyses confirmed that the 3D scaffolds have a morphology similar to the extracellular matrix, and that their hydrophilicity, swelling ratio, porosity, and degradation rate were adequate for bone tissue regeneration. Release studies show that the scaffolds provide an initial burst release of the drugs, followed by a sustained release for 21 days. These 3D scaffolds did not show any cytotoxic effect on the L-929 cell line, and increased cell viability over time indicates that they can be used in tissue engineering applications.

Microstructural Effects of Melt Electrowritten-Reinforced Hydrogel Scaffolds for Engineering Thick Skin Substitutes

Engineering thick skin tissue substitutes resembling the physiochemical and mechanical properties of native tissue is a significant challenge. Melt electrowriting (MEW) is a powerful technique with the capability of fabricating highly ordered structures with fine fiber diameters, closely replicating the native extracellular matrix (ECM). In this study, we constructed melt electrowritten porous polycaprolactone (PCL) scaffolds with three different geometries by depositing fibers at 0-90 and 60-120° in a mesh structure and in a honeycomb-like orientation to assess the effects of the microstructure on the mechanical strength of the scaffold and cellular behavior. These scaffolds were subsequently infilled with gelatin hydrogel, encapsulating human skin dermal fibroblasts (HSFs) and human umbilical vein endothelial cells (HUVECs). Mechanical tensile tests revealed that the honeycomb microstructure of the hybrid PCL/gelatin scaffold exhibited greater elongation at failure, along with an acceptable elastic modulus suitable for skin tissue applications. All scaffolds provided a cytocompatible microenvironment that maintained over 90% cell viability and preserved typical cell morphology. HSFs were guided through the PCL fibers to the apical surface, while HUVECs were distributed within the gelatin hydrogel within the hybrid structure. Additionally, HSFs' alignment was regulated by the scaffold geometry. Notably, the expression of CD31 in HUVECs─a key transmembrane protein for capillary formation─increased significantly over a 14 day incubation period. Among those, 0-90° mesh and honeycomb geometries showed the greatest effects on the upregulation of CD31. These findings demonstrate that the microstructural guidance of HSFs and their interaction with HUVECs in hybrid structures play a crucial role in promoting vascularization. In conclusion, the honeycomb MEW-gelatin hybrid scaffold demonstrates significant potential for effectively replicating both the mechanical and physicochemical properties essential for full-thickness skin tissue substitutes.

Hybrid Hydrogels Augmented via Additive Network Integration (HANI) for Meniscal Tissue Engineering Applications

Orthopedic soft tissue injuries, such as those to the fibrocartilaginous meniscus in the knee, present a significant clinical challenge, impacting millions globally and often requiring surgical interventions that fail to fully restore mechanical function. Current bioengineered meniscal replacement options that incorporate synthetic and/or natural scaffolds have limitations in biomechanical performance and biological integration. This study introduces a novel scaffold fabrication approach, termed Hybrid Hydrogels Augmented via Additive Network Integration (HANI) with great potential for meniscal tissue engineering applications. HANI scaffolds combine cross-linked gelatin-based hydrogels with polycaprolactone (PCL) additive networks, created via Fused Deposition Modeling (FDM), to enhance mechanical strength and replicate the anisotropic properties of the meniscus. Custom Stereolithography (SLA)-printed molds ensure precise dimensional control and seamless incorporation of PCL networks within the hydrogel matrix. The mechanical evaluation of HANI scaffolds showed improvements in compressive stiffness, stress relaxation behavior, and load-bearing capacity, especially with circumferential and 3D PCL reinforcements, when compared to hydrogel scaffolds without additive networks. These findings highlight HANI's potential as a cost-effective, scalable, and tunable scaffold fabrication approach for meniscal tissue engineering applications.

Advanced 3D scaffolds for corneal stroma regeneration: a preclinical progress

Corneal stromal defects represent a significant global cause of blindness, necessitating innovative therapeutic strategies to address the limitations of conventional treatments, such as corneal transplantation. Tissue engineering, a cornerstone of regenerative medicine, offers a transformative approach by leveraging biomaterial-based solutions to restore damaged tissues. Among these, three-dimensional (3D) scaffolds fabricated using advanced techniques like 3D printing have emerged as a promising platform for corneal regeneration. These scaffolds replicate the native extracellular matrix (ECM) architecture, providing a biomimetic microenvironment that supports cell proliferation, differentiation, and tissue integration. This review highlights recent advances in the design and fabrication of 3D scaffolds for corneal stroma engineering (CSE), emphasizing the critical interplay between scaffold architecture, mechanical properties, and bioactive signaling in directing cellular behavior and tissue regeneration. Likewise, we emphasize the diverse range of biomaterials utilized in scaffold fabrication, highlighting their influence on cellular interactions and tissue reconstruction. By elucidating the complex relationship between scaffold design and biologics, this review aims to illuminate the evolution of next-generation strategies for engineering functional corneal tissue. Eventually, this review will provide a comprehensive synthesis of the current state-of-the-art in 3D scaffold-based corneal tissue engineering (CTE), offering insights that could advance progress toward effective vision restoration therapies.

Isobavachalcone-loaded electrospun polycaprolactone/gelatin nanofibers for antibacterial and antioxidant applications

Antibacterial nanofibers have been widely used in the fields of biomedicine and food packaging fields. To overcome existing antibiotic resistance, this study utilized isobavachalcone (IBC), a natural compound with antibacterial and antioxidant properties, combined with polycaprolactone (PCL) and gelatin (GEL) to develop an electrospun nanofibrous antibacterial membrane. Scanning electron microscopy (SEM) analysis revealed a uniform and smooth surface structure of the nanofiber. Fourier transform infrared spectroscopy and x-ray diffraction confirmed the interactions among the components of the nanofibrous membrane PCL/GEL/IBC (PGI). Thermogravimetric analysis and contact angle measurements demonstrated the thermal stability and hydrophilic nature. Additionally, the mechanical properties of PGI membrane were that the elongation at break increased to 19.9% and the tensile strength to 2.9 MPa.In vitrorelease studies indicated at least 48% release rate of IBC from the PGI nanofibrous membrane in 12 h, and release period up to 14 d. Antioxidant results revealed PGI membranes had fine abilities for scavenging free radical. The elimination of over 99% ofStaphylococcus aureusand elimination of 54%Candida albicansdemonstrated the antibacterial capacities of the PGI membrane, indicating its potential as antibacterial and antioxidant materials. Subsequent faster wound healing, lower oxidative damage for 4-HNE and 8-OHdG, further demonstrated that PGI can reduce oxidative damage at the wound and promote wound healing. These findings also suggest the potential of PGI in the field of tissue engineering.

Solution Blow Spinning: An Emerging Nanomaterials-Based Wound-Care Technology

Application of one-dimensional nanofibers have witnessed exponential growth over the past few decades and are still emerging with their excellent physicochemical and electrical properties. The driving force behind this intriguing transition lies in their unique high surface-to-volume ratio, ubiquitous nanodomains, improved tensile strength, and flexibility to incorporate deliberate functionalities required for specific and advanced applications. Besides numerous benefits, nanomaterials may adversely interact with biological tissues and potentially be cytotoxic and carcinogenic. However, precisely engineered design can outperform the risk with myriad benefits. Wound care technologies are evolving, and products involved in wound care management have a yearly market value of $15-22 billion. Solution blow spinning (SBS) is a facile technique to synthesize biocompatible nanofibers with scalable processing variables for multidirectional biomedical applications. SBS is feasible for a wide range of thermoplastic polymers and nanomaterials to fabricate nanocomposites. This review will focus on the relevance of SBS technology for wound care, including dressings, drug delivery, tissue engineering scaffolds, and sensors.

Development of axitinib-loaded polymeric ocular implants for the treatment of posterior ocular diseases

Diabetic retinopathy (DR) and age-related macular degeneration (AMD) are the primary causes of vision impairment and blindness worldwide. The current treatment for these diseases is an intravitreal injection of anti-VEGF agents, which are costly and require frequent injections. Implants can be used to sustain the release of drugs and minimize side effects. Axitinib (AX) is a potent VEGF receptor inhibitor and a promising candidate for treating posterior ocular diseases, such as diabetic retinopathy (DR) and age-related macular degeneration (AMD). A sustained release of AX was successfully achieved from 3D-printed AX-loaded implants fabricated using the well-known 3D printing technique, semi-solid extrusion (SSE). AX at concentrations of 10% w/w and 20% w/w was incorporated within the polycaprolactone (PCL) and Precirol®-based matrix. The fabricated implants were characterized via FTIR spectroscopy, SEM imaging, and thermal analysis. The implants were also evaluated for their drug release and biocompatibility. The AX-loaded implants exhibited thermal stability, and no chemical interactions were found between AX and the matrix components. The release mechanism study of AX revealed that the concentration of drug loading influenced AX release from the implant, with a 10% w/w and 20 %w/w of AX showing first-order and Korsmeyer-Peppas mechanism, respectively. A biocompatibility study using ARPE-19 cells confirmed that AX-loaded implants are nontoxic and safe for ocular use.

Calcium Phosphate (CaP) Composite Nanostructures on Polycaprolactone (PCL): Synergistic Effects on Antibacterial Activity and Osteoblast Behavior

Bone tissue engineering aims to develop biomaterials that are capable of effectively repairing and regenerating damaged bone tissue. Among the various polymers used in this field, polycaprolactone (PCL) is one of the most widely utilized. As a biocompatible polymer, PCL is easy to fabricate, cost-effective, and offers consistent quality control, making it a popular choice for biomedical applications. However, PCL lacks inherent antibacterial properties, making it susceptible to bacterial adhesion and biofilm formation, which can lead to implant failure. To address this issue, this study aims to enhance the antibacterial properties of PCL by incorporating calcium phosphate composite (PCL_CaP) nanostructures onto its surface via hydrothermal synthesis. The resulting "PCL_CaP" nanostructured surfaces exhibited improved wettability and demonstrated mechano-bactericidal potential against Escherichia coli and Bacillus subtilis. The flake-like morphology of the fabricated CaP nanostructures effectively disrupted bacteria membranes, inhibiting bacterial growth. Furthermore, the "PCL_CaP" surfaces supported the adhesion, proliferation, and differentiation of pre-osteoblasts, indicating their potential for bone tissue engineering applications. This study demonstrates the promise of calcium phosphate composite nanostructures as an effective antibacterial coating for implants and medical devices, with further research required to evaluate their long-term stability and in vivo performance.

3D-Printed PCL-Based Scaffolds with High Nanosized Synthetic Smectic Clay Content: Fabrication, Mechanical Properties, and Biological Evaluation for Bone Tissue Engineering

Background

The 3D printing of macro- and mesoporous biomimetic grafts composed of polycaprolactone (PCL) infused with nanosized synthetic smectic clay is a promising innovation in biomaterials for bone tissue engineering (BTE). The main challenge lies in achieving a uniform distribution of nanoceramics across low to high concentrations within the polymer matrix while preserving mechanical properties and biological performance essential for successful osseointegration.

Methods

This study utilized 3D printing to fabricate PCL scaffolds enriched with nanosized synthetic smectic clay (LAP) to evaluate its effects on structural, chemical, thermal, mechanical, and degradative properties, with a focus on in vitro biological performance and non-toxicity. Scaffolds were created with varying proportions of PCL and LAP. Comprehensive characterization included scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), mechanical testing, swelling analysis, and degradation studies. Biological performance was assessed through MTT assays (cell viability), alkaline phosphatase activity, histological analysis, and Raman spectroscopy, highlighting the scaffolds' biocompatibility and potential applications in regenerative medicine.

Results

The developed inks demonstrated excellent injectability, and the 3D-printed PCL/LAP scaffolds exhibited a microporous and rough structure, good structural fidelity, low degradability, thermal stability, and sufficient mechanical strength across all formulations. Intrinsic properties of the scaffolds revealed no cytotoxicity while enhancing bioactivity and promoting in vitro mineralization when cultured with mesenchymal stem cells in all analyzed groups. Notably, the high concentration of LAP within the PCL matrices did not induce in vitro cytotoxicity but rather stimulated in vitro mineralization and differentiation.

Conclusion

This study demonstrated the feasibility of 3D printing PCL/LAP scaffolds with high concentrations of nanoceramics. Both in vitro and in vivo assays validated the regenerative potential of these scaffolds, emphasizing their efficacy as a promising approach for developing advanced biomimetic grafts.

Transparent and Mechanically Robust Janus Nanofiber Membranes for Open Wound Healing and Monitoring

The electrospun nanofiber membrane has demonstrated great potential for wound management due to its porous structure, large surface area, mechanical strength, and barrier properties. However, there is a need to develop transparent bioactive nanofibers with strong mechanical properties to facilitate the monitoring of the healing process. In this study, we present an electrospinning-based method for creating transparent (∼80-90%), strong (∼11-13 MPa), and Janus nanofiber membranes. The innovative square pattern architecture of the membrane includes a thin hydrophobic polycaprolactone layer on top of a layer of hydrophilic ethylene-vinyl alcohol nanofiber, which enables the absorption of excess biofluid from the wound and exhibits Janus wettability for water. Furthermore, incorporating 5% chitosan into the composition of the nanofibers accelerates the healing process through its antioxidant properties and antimicrobial activity against various bacteria, including drug-resistant strains. The developed membrane also demonstrates skin-repairing function, quick blood clotting (around 145 ± 12 s), and biocompatibility with keratinocyte (≥90%), as well as in vitro quick cell migration (∼24 h). With a tensile strength of 11-13 MPa, the membrane effectively adheres to the knee joint even after running 4 km. These optimal properties of the electrospun nanofiber membrane make it suitable for effective wound management and inspection of the healing process, without the need for frequent dressing changes.

Semiaromatic Polyester-Ethers with Tunable Degradation Profiles

Poly(ε-caprolactone) (PCL) is a widely utilized polymer within the biomedical field; however, one of its limitations is the multi-year long degradation profile. Herein, we report a semiaromatic polyester-ether (SAEE) PCL copolymer using a salicylic acid-based monomer which can disrupt the semicrystalline nature of the bulk material. The molar percentage of incorporation correlated to a linear decrease in melting and crystallization temperature, until a totally amorphous solid was seen at 37 mol %. Alongside this, mechanical analysis elucidated a softer, more extensible material with E' decreasing from 292 to 222 to 43.8 MPa for PCL to 10 to 22 mol % SAEE, respectively. Accelerated basic degradation studies (2 M NaOH) exhibited total mass loss after 16 weeks for 6 mol % compared to only 38% mass loss for PCL over the same period. Overall, by varying the SAEE mol %, we show the ability to finely tune the thermal, mechanical, and degradation profiles of PCL copolymers while maintaining an advantageous biological profile.

Drug-Eluting and Antibacterial Core-Shell Polycaprolactone/Pectin Nanofibers Containing Ti3C2Tx MXene and Medical Herbs for Wound Dressings

Fibrous scaffolds capable of delivering natural drugs and herbs show great promise for tissue regeneration and wound care, particularly in personalized medicine. This study presents the fabrication and characterization of drug-eluting antibacterial core-shell mats composed of polycaprolactone (PCL) and pectin nanofibers produced through coaxial electrospinning. Berberine chloride (BBR), an herbal compound with antineoplastic, anti-inflammatory, antilipidemic, and antidiabetic properties, served as the model drug. Poly(vinyl alcohol) (PVA) was blended with pectin to enhance the mechanical properties of the core fibers. The shell was modified with two-dimensional Ti3C2Tx (MXene) nanosheets and subjected to covalent and ionic cross-linking. Structural analysis confirmed the successful production of bead-free fibers with diameters ranging from 160 to 350 nm, depending on composition. The PCL core fibers were uniformly coated with a pectin/PVA shell approximately 90 nm thick. The inclusion of BBR and MXene increased the fiber diameter. Drug-release kinetics, modeled by using Korsmeyer-Peppas, revealed a two-stage release mechanism. An initial burst release occurred within the first 24 h (kinetic exponent n = 1.36), followed by sustained release over 2 weeks (n = 0.48). The release mechanisms were identified as case-II relaxational release in the first stage, transitioning to quasi-Fickian diffusion in the second. Incorporating MXene into the shell further prolonged drug release. The mechanical strength of the scaffolds improved significantly by a factor of 7 and 4 in wet and dry conditions, respectively. In vitro biocompatibility assays using L929 cells demonstrated excellent cell attachment and compatibility. Additionally, antibacterial tests against Escherichia coli showed that the inclusion of MXene enhanced antibacterial activity by 30%. These results suggest that the functional biocomposite scaffolds hold the potential for developing innovative, drug-eluting wound dressings.

Hierarchically vascularized and suturable tissue constructs created through angiogenesis from tissue-engineered vascular grafts

A major roadblock in implementing engineered tissues clinically lies in their limited vascularization. After implantation, such tissues do not integrate with the host's circulation as quickly as needed, commonly resulting in loss of viability and functionality. This study presents a solution to the vascularization problem that could enable the survival and function of large, transplantable, and vascularized engineered tissues. The technique allows vascularization of a cell laden hydrogel through angiogenesis from a suturable tissue-engineered vascular graft (TEVG) constructed from electrospun polycaprolactone with macropores. The graft is surrounded by a layer of cell-laden gelatin-methacryloyl hydrogel. The constructs are suturable and possess mechanical properties like native vessels. Angiogenesis occurs through the pores in the graft, resulting in a hydrogel containing an extensive vascular network that is connected to an implantable TEVG. The size of the engineered tissue and the degree of vascularization can be increased by adding multiple TEVGs into a single construct. The engineered tissue has the potential to be immediately perfused by the patient's blood upon surgical anastomosis to host vessels, enabling survival of implanted cells. These findings provide a meaningful step to address the longstanding problem of fabricating suturable pre-vascularized tissues which could survive upon implantation in vivo. STATEMENT OF SIGNIFICANCE: Creating vascularized engineered tissues that can be transplanted and rapidly perfused by the host blood supply is a major challenge which has limited the clinical impact of tissue engineering. In this study we demonstrate a technique to fabricate vascularized tissue constructs via angiogenesis from a suturable tissue-engineered vascular graft. The macroporous graft is surrounded with hydrogel, allowing endothelial cells to migrate from the lumen and vascularize the hydrogel layer with capillary-like structures connected to the macrovessel. The graft has comparable mechanical properties to native blood vessels and larger constructs can be fabricated by incorporating multiple grafts. These constructs could potentially be connected surgically to the circulation at an implantation site to support their immediate perfusion and survival.

Functional Scaffolds for Bone Tissue Regeneration: A Comprehensive Review of Materials, Methods, and Future Directions

Bone tissue regeneration is a rapidly evolving field aimed at the development of biocompatible materials and devices, such as scaffolds, to treat diseased and damaged osseous tissue. Functional scaffolds maintain structural integrity and provide mechanical support at the defect site during the healing process, while simultaneously enabling or improving regeneration through amplified cellular cues between the scaffold and native tissues. Ample research on functionalization has been conducted to improve scaffold-host tissue interaction, including fabrication techniques, biomaterial selection, scaffold surface modifications, integration of bioactive molecular additives, and post-processing modifications. Each of these methods plays a crucial role in enabling scaffolds to not only support but actively participate in the healing and regeneration process in bone and joint surgery. This review provides a state-of-the-art, comprehensive overview of the functionalization of scaffold-based strategies used in tissue engineering, specifically for bone regeneration. Critical issues and obstacles are highlighted, applications and advances are described, and future directions are identified.

Impact of morphological features and chemical composition of tendon biomimetic scaffolds on immune recognition via Toll-like receptors

Tendinopathies are a major worldwide clinical problem. The development of tendon biomimetic scaffolds is considered a promising, therapeutic approach. However, to be clinically effective, scaffolds should avoid immunological recognition. It has been well described that scaffolds composed of aligned fibers lead to a better tenocyte differentiation, vitality, proliferation and motility. However, little has been studied regarding the impact of fiber spatial distribution on the recognition by immune cells. Additionally, it has been suggested that higher hydrophilicity would reduce their immune recognition. Herein, polycaprolactone (PCL)-hyaluronic acid (HA)-based electrospun scaffolds were generated with different fiber diameters (in the nano- and micro-scales) and orientations as well as different grades of wettability and the impact of these properties on immunological recognition has been assessed, by means of Toll-like receptor (TLR) reporter cells. Our results showed that TLR 2/1 and TLR 2/6 were not triggered by the scaffolds. In addition, the TLR 4 signalling pathway seems to be triggered to a greater extent by higher PCL and HA concentrations, but the alignment of the fibers prevents the triggering of this receptor. Taken together, TLR reporter cells were shown to be a useful and effective tool to study the potential of scaffolds to induce immune responses and the results obtained can be used to inform the design of fibrous scaffolds for tendon repair.

Osteogenic potentials in canine mesenchymal stem cells: unraveling the efficacy of polycaprolactone/hydroxyapatite scaffolds in veterinary bone regeneration

BACKGROUND

The integration of stem cells, signaling molecules, and biomaterial scaffolds is fundamental for the successful engineering of functional bone tissue. Currently, the development of composite scaffolds has emerged as an attractive approach to meet the criteria of ideal scaffolds utilized in bone tissue engineering (BTE) for facilitating bone regeneration in bone defects. Recently, the incorporation of polycaprolactone (PCL) with hydroxyapatite (HA) has been developed as one of the suitable substitutes for BTE applications owing to their promising osteogenic properties. In this study, a three-dimensional (3D) scaffold composed of PCL integrated with HA (PCL/HA) was prepared and assessed for its ability to support osteogenesis in vitro. Furthermore, this scaffold was evaluated explicitly for its efficacy in promoting the proliferation and osteogenic differentiation of canine bone marrow-derived mesenchymal stem cells (cBM-MSCs) to fill the knowledge gap regarding the use of composite scaffolds for BTE in the veterinary orthopedics field.

RESULTS

Our findings indicate that the PCL/HA scaffolds substantially supported the proliferation of cBM-MSCs. Notably, the group subjected to osteogenic induction exhibited a markedly upregulated expression of the osteogenic gene osterix (OSX) compared to the control group. Additionally, the construction of 3D scaffold constructs with differentiated cells and an extracellular matrix (ECM) was successfully imaged using scanning electron microscopy. Elemental analysis using a scanning electron microscope coupled with energy-dispersive X-ray spectroscopy confirmed that these constructs possessed the mineral content of bone-like compositions, particularly the presence of calcium and phosphorus.

CONCLUSIONS

This research highlights the synergistic potential of PCL/HA scaffolds in concert with cBM-MSCs, presenting a multidisciplinary approach to scaffold fabrication that effectively regulates cell proliferation and osteogenic differentiation. Future in vivo studies focusing on the repair and regeneration of bone defects are warranted to further explore the regenerative capacity of these constructs, with the ultimate goal of assessing their potential in veterinary clinical applications.

Research advancements on nerve guide conduits for nerve injury repair

Peripheral nerve injury (PNI) is one of the most serious causes of disability and loss of work capacity of younger individuals. Although PNS has a certain degree of regeneration, there are still challenges like disordered growth, neuroma formation, and incomplete regeneration. Regarding the management of PNI, conventional methods such as surgery, pharmacotherapy, and rehabilitative therapy. Treatment strategies vary depending on the severity of the injury. While for the long nerve defect, autologous nerve grafting is commonly recognized as the preferred surgical approach. Nevertheless, due to lack of donor sources, neurological deficits and the low regeneration efficiency of grafted nerves, nerve guide conduits (NGCs) are recognized as a future promising technology in recent years. This review provides a comprehensive overview of current treatments for PNI, and discusses NGCs from different perspectives, such as material, design, fabrication process, and composite function.

Fabrication of 3D Polycaprolactone Macrostructures by 3D Electrospinning

Building 3D electrospun macrostructures and monitoring the biological activities inside them are challenging. In this study, 3D fibrous polycaprolactone (PCL) macrostructures were successfully fabricated using in-house 3D electrospinning. The main factors supporting the 3D self-assembled nanofiber fabrication are the H3PO4 additives, flow rate, and initial distance. The effects of solution concentration, solvent, H3PO4 concentration, flow rate, initial distance, voltage, and nozzle speed on the 3D macrostructures were examined. The optimal conditions of 4 mL/h flow rate, 4 cm initial nozzle-collector distance, 14 kV voltage, and 1 mm/s nozzle speed provided a rapid buildup of cylinder macrostructures with 6 cm of diameter, reaching a final height of 16.18 ± 2.58 mm and a wall thickness of 3.98 ± 1.01 mm on one perimeter with uniform diameter across different sections (1.40 ± 1.10 μm average). Oxygen plasma treatment with 30-50 W for 5 min significantly improved the hydrophilicity of the PCL macrostructures, proving a suitable scaffold for in vitro cell cultures. Additionally, 3D images obtained by synchrotron radiation X-ray tomographic microscopy (SRXTM) presented cell penetration and cell growth within the scaffolds. This breakthrough in 3D electrospinning surpasses current scaffold fabrication limitations, opening new possibilities in various fields.

Smart Bandage Based on a ZIF-8 Triboelectric Nanogenerator for In Situ Real-Time Monitoring of Drug Concentration

For chronic wounds, frequent replacement of bandages not only increases the likelihood of secondary damage and the risk of cross infection but also wastes medication. Therefore, in situ real-time monitoring of the concentrations of residual drugs in bandages is crucial. Here, we propose a novel strategy that combines a triboelectric nanogenerator (TENG) with medical bandages to develop a smart bandage based on zeolite imidazolate framework TENG. During the process of wound healing, the electrical output of TENG changes with the continuous release of drugs. Based on the correlation between the electrical signal of TENG and drug concentration, the concentration of residual drugs in the bandage can be monitored in real-time in situ, guiding medical staff to replace the bandage at the most appropriate time. The smart bandage based on TENG provides a new strategy for in situ real-time monitoring of drug concentration and also provides an ideal and feasible solution for the field of biomedical drug sensing.

Synthesis of star-shaped poly(lactide)s, poly(valerolactone)s and poly(caprolactone)s via ROP catalyzed by N-donor tin(ii) cations and comparison of their wetting properties with linear analogues

In this study, we report the use of N-coordinated tin(ii) cations [L1→Sn(H2O)][OTf]2·THF (1) and [L1→SnCl][SnCl3] (2) (L1 = 1,2-(C5H4N-2-CH = N)2CH2CH2) as efficient ROP catalysts, which, in combination with benzyl alcohol, afford well-defined linear poly(ε-caprolactone) (PCL) and poly(δ-valerolactones) (PVL) via an activated monomer mechanism (AMM). Thanks to the versatility of complexes 1 and 2 as catalysts, star-shaped PCL, PVL and PLA were also prepared using three-, four-, five- and six-functional alcohols. The number of arms was determined by SEC-MALS-Visco analysis. Spin-coated thin layers of linear and selected six-armed polymers were further studied in terms of their wettability to water. Attention was focused on the influence of the composition and structure of the polymers. Finally, to increase the hydrophobic properties of the studied polymers, stannaboroxines L2(Ph)Sn[(OB-(C6H4-4-CF3))2O] and L2(Ph)Sn[(OB-(C6H4-3,5-CF3)2)2O] (L2 = C6H3-2,6-(Me2NCH2)2) were applied.

Protective Role of Nanoceria-Infused Nanofibrous Scaffold toward Bone Tissue Regeneration with Senescent Cells

The presence of oxidative stress in bone defects leads to delayed regeneration, especially in the aged population and patients receiving cancer treatment. This delay is attributed to the increased levels of reactive oxygen species (ROS) in these populations due to the accumulation of senescent cells. Tissue-engineered scaffolds are emerging as an alternative method to treat bone defects. In this study, we engineered tissue scaffolds tailored to modulate the adverse effects of oxidative stress and promote bone regeneration. We used polycaprolactone to fabricate nanofibrous mats by using electrospinning. We exploited the ROS-scavenging properties of cerium oxide nanoparticles to alleviate the high oxidative stress microenvironment caused by the presence of senescent cells. We characterized the nanofibers for their physical and mechanical properties and utilized an ionization-radiation-based model to induce senescence in bone cells. We demonstrate that the presence of ceria can modulate ROS levels, thereby reducing the level of senescence and promoting osteogenesis. Overall, this study demonstrates that ceria-infused nanofibrous scaffolds can be used for augmenting the osteogenic activity of senescent progenitor cells, which has important implications for engineering bone tissue scaffolds for patients with low regeneration capabilities.

Multi-variate multi-objective optimization of production conditions for electro-spun skin scaffold using RSM and investigation of gamma irradiation effects on the properties of the optimized sample

Developing electro-spun scaffolds with ideal mechanical properties for skin purposes can profit from using the Response Surface Methodology technique to define and optimize the outcome quality and required sterilization for use in vivo. This study investigated the effects of four main independent electrospinning variables for polycaprolactone nanofibers scaffold using multi-variable and multi-objective optimization. It was done to determine significant parameters on responses and find optimal conditions to reach the preferred properties. Young's modulus, elongation-at-break, and tensile strength were the responses. After obtaining appropriate models, the impact share of variables on the responses was determined using Sobol sensitivity analysis. The results showed that flow rate is the most significant parameter of elastic modulus and tensile strength responses, with 76.45 % and 41.27 % impact shares, respectively. The polymer concentration is the following significant parameter on elongation at break, tensile strength and, Young's modulus responses with 64.35 %, 39.485 and, 14.28 % impact share, respectively. Based on the optimized results, a skin scaffold with desired mechanical properties was achieved (under solution concentration of 10 % w/v, flow rate of 2 mL/h, nuzzle-collector distance of 15 cm, and applied voltage of 20 kV). Then it was sterilized with gamma radiation of various doses (25, 40, and 55 kGy) to use in vivo. The SEM analysis indicated no significant change in fibrous morphology due to gamma irradiation at any dosage. FTIR analysis demonstrated the breakup of ester bonds due to gamma irradiation. For samples irradiated by 25 kGy, the crystallinity percentage decreased and chains crosslinking without losing the mechanical stability was dominant. The studies demonstrated that 25 kGy of gamma irradiation could improve the mechanical properties of the optimized PCL skin scaffold, which is very promising for wound healing.

Development and characterization of Polycaprolactone/chitosan-based scaffolds for tissue engineering of various organs: A review

Research in creating 3D structures mirroring the extracellular matrix (ECM) with accurate environmental cues holds paramount significance in biological applications.Biomaterials that replicate ECM properties-mechanical, physicochemical, and biological-emerge as pivotal tools in mimicking ECM behavior.Incorporating synthetic and natural biomaterials is widely used to produce scaffolds suitable for the intended organs.Polycaprolactone (PCL), a synthetic biomaterial, boasts commendable mechanical properties, albeit with relatively modest biological attributes due to its hydrophobic nature.Chitosan (CTS) exhibits strong biological traits but lacks mechanical resilience for complex tissue regeneration.Notably, both PCL and CTS have demonstrated their application in tissue engineering for diverse types of tissues.Their combination across varying PCL:CTS ratios has increased the likelihood of fabricating scaffolds to address defects in sturdy and pliable tissues.This comprehensive analysis aspires to accentuate their distinct attributes within tissue engineering across different organs.The central focus resides in the role of PCL:CTS-based scaffolds, elucidating their contribution to the evolution of advanced functional 3D frameworks tailored for tissue engineering across diverse organs.Moreover, this discourse delves into the considerations pertinent to each organ.

Simple Electrospinning Method for Biocompatible Polycaprolactone β-Carotene Scaffolds: Advantages and Limitations

In this study, electrospun scaffolds were fabricated using polycaprolactone (PCL) loaded with varying concentrations of β-carotene (1.2%, 2.4%, and 3.6%) via the electrospinning technique. The electrospinning process involved the melting of PCL in acetic acid, followed by the incorporation of β-carotene powder under constant stirring. Raman spectroscopy revealed a homogeneous distribution of β-carotene within the PCL matrix. However, the β-carotene appeared in particulate form, rather than being dissolved and blended with the PCL matrix, a result also confirmed by thermogravimetric analysis. Additionally, X-ray diffraction analysis indicated a decrease in crystallinity with increasing β-carotene concentration. Mechanical testing of the scaffolds demonstrated an increase in ultimate strain, accompanied by a reduction in ultimate stress, indicating a potential plasticizing effect. Moreover, antimicrobial assays revealed a marginal antibacterial effect against Escherichia coli for scaffolds with higher β-carotene concentrations. Conversely, preliminary biological assessment using KUSA-A1 mesenchymal cells indicated enhanced cellular proliferation in response to the scaffolds, suggesting the potential biocompatibility and cell-stimulating properties of β-carotene-loaded PCL scaffolds. Overall, this study provides insights into the fabrication and characterization of electrospun PCL scaffolds containing β-carotene, laying the groundwork for further exploration in tissue engineering and regenerative medicine applications.

Reducing Inert Materials for Optimal Cell-Cell and Cell-Matrix Interactions within Microphysiological Systems

In the pursuit of achieving a more realistic in vitro simulation of human biological tissues, microfluidics has emerged as a promising technology. Organ-on-a-chip (OoC) devices, a product of this technology, contain miniature tissues within microfluidic chips, aiming to closely mimic the in vivo environment. However, a notable drawback is the presence of inert material between compartments, hindering complete contact between biological tissues. Current membranes, often made of PDMS or plastic materials, prevent full interaction between cell types and nutrients. Furthermore, their non-physiological mechanical properties and composition may induce unexpected cell responses. Therefore, it is essential to minimize the contact area between cells and the inert materials while simultaneously maximizing the direct contact between cells and matrices in different compartments. The main objective of this work is to minimize inert materials within the microfluidic chip while preserving proper cellular distribution. Two microfluidic devices were designed, each with a specific focus on maximizing direct cell-matrix or cell-cell interactions. The first chip, designed to increase direct cell-cell interactions, incorporates a nylon mesh with regular pores of 150 microns. The second chip minimizes interference from inert materials, thereby aiming to increase direct cell-matrix contact. It features an inert membrane with optimized macropores of 1 mm of diameter for collagen hydrogel deposition. Biological validation of both devices has been conducted through the implementation of cell migration and cell-to-cell interaction assays, as well as the development of epithelia, from isolated cells or spheroids. This endeavor contributes to the advancement of microfluidic technology, aimed at enhancing the precision and biological relevance of in vitro simulations in pursuit of more biomimetic models.

Fabrication of 3D-printed scaffolds loaded with gallium acetylacetonate for potential application in osteoclastic bone resorption

We recently reported the potential of a new gallium compound, gallium acetylacetonate (GaAcAc) in combating osteoclastic bone resorption through inhibition of osteoclast differentiation and function. Herein, we focused on 3D-printed polylactic acid scaffolds that were loaded with GaAcAc and investigated the impact of scaffold pretreatment with polydopamine (PDA) or sodium hydroxide (NaOH). We observed a remarkable increase in scaffold hydrophilicity with PDA or NaOH pretreatment while biocompatibility and in vitro degradation were not affected. NaOH-pretreated scaffolds showed the highest amount of GaAcAc loading when compared to other scaffolds (p < 0.05). NaOH-pretreated scaffolds with GaAcAc loading showed effective reduction of osteoclast counts and size. The trend was supported by suppression of key osteoclast differentiation markers such as NFAT2, c-Fos, TRAF6, & TRAP. All GaAcAc-loaded scaffolds, regardless of surface pretreatment, were effective in inhibiting osteoclast function as evidenced by reduction in the number of resorptive pits in bovine cortical bone slices (p < 0.01). The suppression of osteoclast function according to the type of scaffold followed the ranking: GaAcAc loading without surface pretreatment > GaAcAc loading with NaOH pretreatment > GaAcAc loading with PDA pretreatment. Additional studies will be needed to fully elucidate the impact of surface pretreatment on the efficacy and safety of GaAcAc-loaded 3D-printed scaffolds.

Developing strategies to optimize the anchorage between electrospun nanofibers and hydrogels for multi-layered plasmonic biomaterials

Polycaprolactone (PCL), a recognized biopolymer, has emerged as a prominent choice for diverse biomedical endeavors due to its good mechanical properties, exceptional biocompatibility, and tunable properties. These attributes render PCL a suitable alternative biomaterial to use in biofabrication, especially the electrospinning technique, facilitating the production of nanofibers with varied dimensions and functionalities. However, the inherent hydrophobicity of PCL nanofibers can pose limitations. Conversely, acrylamide-based hydrogels, characterized by their interconnected porosity, significant water retention, and responsive behavior, present an ideal matrix for numerous biomedical applications. By merging these two materials, one can harness their collective strengths while potentially mitigating individual limitations. A robust interface and effective anchorage during the composite fabrication are pivotal for the optimal performance of the nanoplatforms. Nanoplatforms are subject to varying degrees of tension and physical alterations depending on their specific applications. This is particularly pertinent in the case of layered nanostructures, which require careful consideration to maintain structural stability and functional integrity in their intended applications. In this study, we delve into the influence of the fiber dimensions, orientation and surface modifications of the nanofibrous layer and the hydrogel layer's crosslinking density on their intralayer interface to determine the optimal approach. Comprehensive mechanical pull-out tests offer insights into the interfacial adhesion and anchorage between the layers. Notably, plasma treatment of the hydrophobic nanofibers and the stiffness of the hydrogel layer significantly enhance the mechanical effort required for fiber extraction from the hydrogels, indicating improved anchorage. Furthermore, biocompatibility assessments confirm the potential biomedical applications of the proposed nanoplatforms.

Step-by-step fabrication of heart-on-chip systems as models for cardiac disease modeling and drug screening

Cardiovascular diseases are caused by hereditary factors, environmental conditions, and medication-related issues. On the other hand, the cardiotoxicity of drugs should be thoroughly examined before entering the market. In this regard, heart-on-chip (HOC) systems have been developed as a more efficient and cost-effective solution than traditional methods, such as 2D cell culture and animal models. HOCs must replicate the biology, physiology, and pathology of human heart tissue to be considered a reliable platform for heart disease modeling and drug testing. Therefore, many efforts have been made to find the best methods to fabricate different parts of HOCs and to improve the bio-mimicry of the systems in the last decade. Beating HOCs with different platforms have been developed and techniques, such as fabricating pumpless HOCs, have been used to make HOCs more user-friendly systems. Recent HOC platforms have the ability to simultaneously induce and record electrophysiological stimuli. Additionally, systems including both heart and cancer tissue have been developed to investigate tissue-tissue interactions' effect on cardiac tissue response to cancer drugs. In this review, all steps needed to be considered to fabricate a HOC were introduced, including the choice of cellular resources, biomaterials, fabrication techniques, biomarkers, and corresponding biosensors. Moreover, the current HOCs used for modeling cardiac diseases and testing the drugs are discussed. We finally introduced some suggestions for fabricating relatively more user-friendly HOCs and facilitating the commercialization process.

Poly(ethylene glycol) Hydrogels with the Sustained Release of Hepatocyte Growth Factor for Enhancing Vascular Regeneration

The surface modification of biologically active factors on tissue-engineering vascular scaffold fails to fulfill the mechanical property and bioactive compounds' sustained release in vivo and results in the inhibition of tissue regeneration of small-diameter vascular grafts in vascular replacement therapies. In this study, biodegradable poly(ε-caprolactone) (PCL) was applied for scaffold preparation, and poly(ethylene glycol) (PG) hydrogel was used to load heparin and hepatocyte growth factor (HGF). In vitro analysis demonstrated that the PCL scaffold could inhibit the heparin release from the PG hydrogel, and the PG hydrogel could inhibit heparin release during the process of PCL degradation. Finally, it results in sustained release of HGF and heparin from the PCL-PG-HGF scaffold. The mechanical property of this hybrid scaffold improved after being coated with the PG hydrogel. In addition, the PCL-PG-HGF scaffold illustrated no inflammatory lesions, organ damage, or biological toxicity in all primary organs, with rapid organization of the endothelial cell layer, smooth muscle regeneration, and extracellular matrix formation. These results indicated that the PCL-PG-HGF scaffold is biocompatible and provides a microenvironment in which a tissue-engineered vascular graft with anticoagulant properties allows regeneration of vascular tissue (Scheme 1). Such findings confirm the feasibility of creating hydrogel scaffolds coated with bioactive factors to prepare novel vascular grafts.

Recent Advances in Functionalized Electrospun Membranes for Periodontal Regeneration

Periodontitis is a global, multifaceted, chronic inflammatory disease caused by bacterial microorganisms and an exaggerated host immune response that not only leads to the destruction of the periodontal apparatus but may also aggravate or promote the development of other systemic diseases. The periodontium is composed of four different tissues (alveolar bone, cementum, gingiva, and periodontal ligament) and various non-surgical and surgical therapies have been used to restore its normal function. However, due to the etiology of the disease and the heterogeneous nature of the periodontium components, complete regeneration is still a challenge. In this context, guided tissue/bone regeneration strategies in the field of tissue engineering and regenerative medicine have gained more and more interest, having as a goal the complete restoration of the periodontium and its functions. In particular, the use of electrospun nanofibrous scaffolds has emerged as an effective strategy to achieve this goal due to their ability to mimic the extracellular matrix and simultaneously exert antimicrobial, anti-inflammatory and regenerative activities. This review provides an overview of periodontal regeneration using electrospun membranes, highlighting the use of these nanofibrous scaffolds as delivery systems for bioactive molecules and drugs and their functionalization to promote periodontal regeneration.

Active colorimetric bilayer polycaprolactone-eucalyptus oil@silk fibroin-bayberry anthocyanins (PCL-EO@SF-BAs) membrane with directional water transport (DWT) for food packaging

Currently, designing smart membranes with multifunctional effectiveness is crucial to food freshness monitoring and retention. Herein, an active colorimetric Janus bilayer membrane with directional water transport (DWT) performance is constructed by electrospinning, which comprises a hydrophilic layer of silk fibroin-bayberry anthocyanins (SF-BAs) and a hydrophobic layer of polycaprolactone-eucalyptus oil (PCL-EO). The entities of BAs and EO are well dispersed in the fiber matrix by hydrogen bonds and physical interactions, respectively. BAs endow the membrane colorimetric response and antioxidant activity, and EO contributes to the antibacterial activity while DWT performance is generated from the asymmetric wettability of the two layers. The bilayer membrane has an accumulative one-way transport index of 1077%, an overall moisture management capacity of 0.76 and a water evaporation rate of 0.48 g h-1. Moreover, the release of BAs and EO was predominantly controlled by Fickian diffusion. As a pH-sensing indicator, PCL-EO@SF-BAs is highly sensitive to external pH stimuli and the response is reversible. In addition to freshness monitoring, PCL-EO@SF-BAs can extend the shelf-life of pork beyond 100% at 4 °C. Also, it can extend the shelf life of shrimp by approximately 70% at 25 °C with the synergistic effect of antibacterial activity and the DWT performance.

Biological properties of polycaprolactone and barium titanate composite in biomedical applications

The ceramic-polymer composite materials are widely known for their exceptional mechanical and biological properties. Polycaprolactone (PCL) is a biodegradable polymer material extensively used in various biomedical applications. At the same time, barium titanate (BT), a ceramic material, exhibits piezoelectric properties similar to bone, which is essential for osseointegration. Furthermore, a composite material that combines the benefits of PCL and BT results in an innovative composite material with enhanced properties for biomedical applications. Thus, this review is organised into three sections. Firstly, it aims to provide an overview of the current research on evaluating biological properties, including antibacterial activity, cytotoxicity and osseointegration, of PCL polymeric matrices in its pure form and reinforced structures with ceramics, polymers and natural extracts. The second section investigates the biological properties of BT, both in its pure form and in combination with other supporting materials. Finally, the third section provides a summary of the biological properties of the PCLBT composite material. Furthermore, the existing challenges of PCL, BT and their composites, along with future research directions, have been presented. Therefore, this review will provide a state-of-the-art understanding of the biological properties of PCL and BT composites as potential futuristic materials in biomedical applications.

Incorporating nanoconfined chitin-fibrils in poly (ε-caprolactone) membrane scaffolds improves mechanical and chemical properties for biomedical application

Engineered composite scaffolds composed of natural and synthetic polymers exhibit cooperation at the molecular level that closely mimics tissue extracellular matrix's (ECM) physical and chemical characteristics. However, due to the lack of smooth intermix capability of natural and synthetic materials in the solution phase, bio-inspired composite material development has been quite challenged. In this research, we introduced new bio-inspired material blending techniques to fabricate nanofibrous composite scaffolds of chitin nanofibrils (CNF), a natural hydrophilic biomaterial and poly (ɛ-caprolactone) (PCL), a synthetic hydrophobic-biopolymer. CNF was first prepared by acid hydrolysis technique and dispersed in trifluoroethanol (TFE); and second, PCL was dissolved in TFE and mixed with the chitin solution in different ratios. Electrospinning and spin-coating technology were used to form nanofibrous mesh and films, respectively. Physicochemical properties, such as mechanical strength, and cellular compatibility, and structural parameters, such as morphology, and crystallinity, were determined. Toward the potential use of this composite materials as a support membrane in blood-brain barrier application (BBB), human umbilical vein endothelial cells (HUVECs) were cultured, and transendothelial electrical resistance (TEER) was measured. Experimental results of the composite materials with PCL/CNF ratios from 100/00 to 25/75 showed good uniformity in fiber morphology and suitable mechanical properties. They retained the excellent ECM-like properties that mimic synthetic-bio-interface that has potential application in biomedical fields, particularly tissue engineering and BBB applications.

Bioactive Nanostructured Scaffold-Based Approach for Tendon and Ligament Tissue Engineering

An effective therapeutic strategy to treat tendon or ligament injury continues to be a clinical challenge due to the limited natural healing capacity of these tissues. Furthermore, the repaired tendons or ligaments usually possess inferior mechanical properties and impaired functions. Tissue engineering can restore the physiological functions of tissues using biomaterials, cells, and suitable biochemical signals. It has produced encouraging clinical outcomes, forming tendon or ligament-like tissues with similar compositional, structural, and functional attributes to the native tissues. This paper starts by reviewing tendon/ligament structure and healing mechanisms, followed by describing the bioactive nanostructured scaffolds used in tendon and ligament tissue engineering, with emphasis on electrospun fibrous scaffolds. The natural and synthetic polymers for scaffold preparation, as well as the biological and physical cues offered by incorporating growth factors in the scaffolds or by dynamic cyclic stretching of the scaffolds, are also covered. It is expected to present a comprehensive clinical, biological, and biomaterial insight into advanced tissue engineering-based therapeutics for tendon and ligament repair.

The interplay of cells, polymers, and vascularization in three-dimensional lung models and their applications in COVID-19 research and therapy

Millions of people have been affected ever since the emergence of the corona virus disease of 2019 (COVID-19) outbreak, leading to an urgent need for antiviral drug and vaccine development. Current experimentation on traditional two-dimensional culture (2D) fails to accurately mimic the in vivo microenvironment for the disease, while in vivo animal model testing does not faithfully replicate human COVID-19 infection. Human-based three-dimensional (3D) cell culture models such as spheroids, organoids, and organ-on-a-chip present a promising solution to these challenges. In this report, we review the recent 3D in vitro lung models used in COVID-19 infection and drug screening studies and highlight the most common types of natural and synthetic polymers used to generate 3D lung models.

Recent Biomedical Applications of Coupling Nanocomposite Polymeric Materials Reinforced with Variable Carbon Nanofillers

The hybridization between polymers and carbon materials is one of the most recent and crucial study areas which abstracted more concern from scientists in the past few years. Polymers could be classified into two classes according to the source materials synthetic and natural. Synthetic polymeric materials have been applied over a floppy zone of industrial fields including the field of biomedicine. Carbon nanomaterials including (fullerene, carbon nanotubes, and graphene) classified as one of the most significant sources of hybrid materials. Nanocarbons are improving significantly mechanical properties of polymers in nanocomposites in addition to physical and chemical properties of the new materials. In all varieties of proposed bio-nanocomposites, a considerable improvement in the microbiological performance of the materials has been explored. Various polymeric materials and carbon-course nanofillers were present, along with antibacterial, antifungal, and anticancer products. This review spots the light on the types of synthetic polymers-based carbon materials and presented state-of-art examples on their application in the area of biomedicine.

Alginate sulfate/ECM composite hydrogel containing electrospun nanofiber with encapsulated human adipose-derived stem cells for cartilage tissue engineering

Stem cell therapy is a promising strategy for cartilage tissue engineering, and cell transplantation using polymeric scaffolds has recently gained attention. Herein, we encapsulated human adipose-derived stem cells (hASCs) within the alginate sulfate hydrogel and then added them to polycaprolactone/gelatin electrospun nanofibers and extracellular matrix (ECM) powders to mimic the cartilage structure and characteristic. The composite hydrogel scaffolds were developed to evaluate the relevant factors and conditions in mechanical properties, cell proliferation, and differentiation to enhance cartilage regeneration. For this purpose, different concentrations (1-5 % w/v) of ECM powder were initially loaded within an alginate sulfate solution to optimize the best composition for encapsulated hASCs viability. Adding 4 % w/v of ECM resulted in optimal mechanical and rheological properties and better cell viability. In the next step, electrospun nanofibrous layers were added to the alginate sulfate/ECM composite to prepare different layered hydrogel-nanofiber (2, 3, and 5-layer) structures with the ability to mimic the cartilage structure and function. The 3-layer structure was selected as the optimum layered composite scaffold, considering cell viability, mechanical properties, swelling, and biodegradation behavior; moreover, the chondrogenesis potential was assessed, and the results showed promising features for cartilage tissue engineering application.

Development and Characterization of Drug Loaded PVA/PCL Fibres for Wound Dressing Applications

Nowadays, synthetic polymers are used in medical applications due to their special biodegradable, biocompatible, hydrophilic, and non-toxic properties. The materials, which can be used for wound dressing fabrication with controlled drug release profile, are the need of the time. The main aim of this study was to develop and characterize polyvinyl alcohol/polycaprolactone (PVA/PCL) fibres containing a model drug. A dope solution comprising PVA/PCL with the drug was extruded into a coagulation bath and became solidified. The developed PVA/PCL fibres were then rinsed and dried. These fibres were tested for Fourier transform infrared spectroscopy, linear density, topographic analysis, tensile properties, liquid absorption, swelling behaviour, degradation, antimicrobial activity, and drug release profile for improved and better healing of the wound. From the results, it was concluded that PVA/PCL fibres containing a model drug can be produced by using the wet spinning technique and have respectable tensile properties; adequate liquid absorption, swelling %, and degradation %; and good antimicrobial activity with the controlled drug release profile of the model drug for wound dressing applications.

Investigation on Centrifugally Spun Fibrous PCL/3-Methyl Mannoside Mats for Wound Healing Application

Fibrous structures, in general, have splendid advantages in different forms of micro- and nanomembranes in various fields, including tissue engineering, filtration, clothing, energy storage, etc. In the present work, we develop a fibrous mat by blending the bioactive extract of Cassia auriculata (CA) with polycaprolactone (PCL) using the centrifugal spinning (c-spinning) technique for tissue-engineered implantable material and wound dressing applications. The fibrous mats were developed at a centrifugal speed of 3500 rpm. The PCL concentration for centrifugal spinning with CA extract was optimized at 15% w/v of PCL to achieve better fiber formation. Increasing the extract concentration by more than 2% resulted in crimping of fibers with irregular morphology. The development of fibrous mats using a dual solvent combination resulted in fine pores on the fiber structure. Scanning electron microscope (SEM) images showed that the surface morphology of the fibers in the produced fiber mats (PCL and PCL-CA) was highly porous. Gas chromatography-mass spectrometry (GC-MS) analysis revealed that the CA extract contained 3-methyl mannoside as the predominant component. The in vitro cell line studies using NIH3T3 fibroblasts demonstrated that the CA-PCL nanofiber mat was highly biocompatible, supporting cell proliferation. Hence, we conclude that the c-spun, CA-incorporating nanofiber mat can be employed as a tissue-engineered construct for wound healing applications.

Probing Single-Cell Fermentation Fluxes and Exchange Networks via pH-Sensing Hybrid Nanofibers

The homeostatic control of their environment is an essential task of living cells. It has been hypothesized that, when microenvironmental pH inhomogeneities are induced by high cellular metabolic activity, diffusing protons act as signaling molecules, driving the establishment of exchange networks sustained by the cell-to-cell shuttling of overflow products such as lactate. Despite their fundamental role, the extent and dynamics of such networks is largely unknown due to the lack of methods in single-cell flux analysis. In this study, we provide direct experimental characterization of such exchange networks. We devise a method to quantify single-cell fermentation fluxes over time by integrating high-resolution pH microenvironment sensing via ratiometric nanofibers with constraint-based inverse modeling. We apply our method to cell cultures with mixed populations of cancer cells and fibroblasts. We find that the proton trafficking underlying bulk acidification is strongly heterogeneous, with maximal single-cell fluxes exceeding typical values by up to 3 orders of magnitude. In addition, a crossover in time from a networked phase sustained by densely connected "hubs" (corresponding to cells with high activity) to a sparse phase dominated by isolated dipolar motifs (i.e., by pairwise cell-to-cell exchanges) is uncovered, which parallels the time course of bulk acidification. Our method addresses issues ranging from the homeostatic function of proton exchange to the metabolic coupling of cells with different energetic demands, allowing for real-time noninvasive single-cell metabolic flux analysis.

Heterogeneous porous PLLA/PCL fibrous scaffold for bone tissue regeneration

Bone tissue engineering has become one of the most promising therapeutic methods to treat bone defects. A suitable scaffolding material to regenerate new bone tissues should have a high specific surface area, high porosity and a suitable surface structure which benefit cell attachment, proliferation, and differentiation. In this study, an acetone post-treatment strategy was developed to generate heterogeneous structure. After PLLA/PCL nanofibrous membranes were electrospun and collected, they were treated with acetone to generate a highly porous structure. Meanwhile, part of PCL was extracted from the fibre and enriched on the fibre surface. The cell affinity of the nanofibrous membrane was verified by human osteoblast-like cells assay. The proliferation rate of heterogeneous samples increased 190.4 %, 265.5 % and 137.9 % at day 10 compared with pristine samples. These results demonstrated that the heterogeneous PLLA/PCL nanofibrous membranes could enhance osteoblast adhesion and proliferation. With high surface area (average surface area 36.302 m²/g) and good mechanical properties (average Young's modulus 1.65 GPa and average tensile strength 5.1 MPa), the heterogeneous PLLA/PCL membrane should have potential applications in the field of bone regeneration.

Electrospun nanofiber mesh with connective tissue growth factor and mesenchymal stem cells for pelvic floor repair: Long-term study

Pelvic organ prolapse (POP) affects many women, with an estimated lifetime risk of surgical intervention of 18.7%. There is a need for alternative approaches as the use of synthetic nondegradable mesh was stopped due to severe adverse events, and as current methods for pelvic floor repair have high POP recurrence rates. Thus, we hypothesized that electrospun degradable meshes with stem cells and growth factor were safe and durable for the long term in elderly rats. In an abdominal repair model, electrospun polycaprolactone (PCL) meshes coated with connective tissue growth factor (CTGF)/PEG-fibrinogen (PF) and rat mesenchymal stem cells were implanted in elderly female rats and removed after in average 53 weeks (53-week group). Collagen amount and production were quantified by qPCR and Western blotting. Moreover, histological appearance and biomechanical properties were evaluated. Results were compared with previous results of young rats with identical mesh implanted for 24 weeks (24-week group). The 53-week group differed from the 24-week group in terms of (1) reduced collagen III, (2) strong reduction in foreign body response, and (3) altered histological appearance. We found comparable biomechanical properties, aside from higher, not significant, mean tissue stiffness in the 53-week group. Lastly, we identified mesh components 53 weeks after implantation. This study provides new insights into future POP repair in postmenopausal women by showing how CTGF/PF-coated electrospun PCL meshes with stem cells exhibit sufficient support, biocompatibility, and no mesh-related complications long term in an abdominal repair model in elderly rats.

Fast and Integral Nano-Surface-Coating of Various Fiber Materials via Interfacial Polymerization

Surface coating is essential and critical to endow fiber materials with various functions for broad applications. However, it is still a great challenge to achieve a fast, fully covered, and robust surface coating on multiple fibers. In this work, a nanoscale surface coating with superior stability was rapidly and integrally formed on various fiber materials (such as Nylon mesh, nonwoven fabrics, and stainless-steel mesh) by highly reactive interfacial polymerization (IP) between polyethylenimine (PEI) and trimesoyl chloride (TMC). The resulting polyamide (PA) layer with an ultrathin thickness of tens of nanometers wholly and uniformly covered the surface of each fiber of the constituent material. Due to the synergistic effect of the PA layer with inherent robustness and the fully covered structure between the outer PA layer and the inner fiber, the nanosurface-coating exhibited outstanding mechanical stability, good acid resistance, and excellent organic solvent resistance. The functional modification of the nanosurface-coating can be easily carried out by using the abundant carboxyl groups in the PA layer. By introducing sulfobetaine zwitterionic copolymers via either "grafting from" or "grafting to" methods, the surfaces presented prominent underwater antioil-adhesion property and exceptional protein adhesion resistance. The surface coating based on IP process opens up an avenue in the field of surface modification. It is expected to offer a generally feasible strategy for the fabrication of fiber materials with robust and multifunctional coatings.

Nano-Hydroxyapatite Composite Scaffolds Loaded with Bioactive Factors and Drugs for Bone Tissue Engineering

Nano-hydroxyapatite (n-HAp) is similar to human bone mineral in structure and biochemistry and is, therefore, widely used as bone biomaterial and a drug carrier. Further, n-HAp composite scaffolds have a great potential role in bone regeneration. Loading bioactive factors and drugs onto n-HAp composites has emerged as a promising strategy for bone defect repair in bone tissue engineering. With local delivery of bioactive agents and drugs, biological materials may be provided with the biological activity they lack to improve bone regeneration. This review summarizes classification of n-HAp composites, application of n-HAp composite scaffolds loaded with bioactive factors and drugs in bone tissue engineering and the drug loading methods of n-HAp composite scaffolds, and the research direction of n-HAp composite scaffolds in the future is prospected.

Fibrous hydrogels by electrospinning: Novel platforms for biomedical applications

Hydrogels, hydrophilic and biocompatible polymeric networks, have been used for numerous biomedical applications because they have exhibited abilities to mimic features of extracellular matrix (ECM). In particular, the hydrogels engineered with electrospinning techniques have shown great performances in biomedical applications. Electrospinning techniques are to generate polymeric micro/nanofibers that can mimic geometries of natural ECM by drawing micro/nanofibers from polymer precursors with electrical forces, followed by structural stabilization of them. By exploiting the electrospinning techniques, the fibrous hydrogels have been fabricated and utilized as 2D/3D cell culture platforms, implantable scaffolds, and wound dressings. In addition, some hydrogels that respond to external stimuli have been used to develop biosensors. For comprehensive understanding, this review covers electrospinning processes, hydrogel precursors used for electrospinning, characteristics of fibrous hydrogels and specific biomedical applications of electrospun fibrous hydrogels and highlight their potential to promote use in biomedical applications.

Piezoelectric conductive electrospun nanocomposite PCL/Polyaniline/Barium Titanate scaffold for tissue engineering applications

Recent trends in tissue engineering technology have switched to electrical potentials generated through bioactive scaffolds regarding their appropriate effects on cell behaviors. Preparing a piezo-electrical stimuli scaffold with high electrical conductivity for bone and cartilage tissue regeneration is the ultimate goal of the present study. Here, Barium Titanate nanoparticles (BaTiO3 NPs) were used as piezoelectric material and highly conductive binary doped Polyaniline nanoparticles (PANI NPs) were synthesized by oxidative polymerization. Polycaprolactone (PCL) was applied as carrier substrate polymer and conductive spun nanofibrous scaffolds of PCL/PANI composites were prepared in two different amounts of PANI (3 and 5 wt.%). The conductivity of PCL/PANI nanofibers has been analyzed by standard four probes test. Based on the obtained results, the PCL/PANI5 (with 5 wt.% PANI) was selected due to the superior electrical conductivity of 8.06 × 10-4 s cm - 1. Moreover, the piezoelectric nanofibrous scaffolds of PCL/BT composite were electrospun in three different amounts of BT (20, 30, and 40 wt.%). To investigate the synergic effect of conductive PANI and piezoelectric BT, ternary nanocomposite scaffolds of PCL/PANI/BT were prepared using the dual jet electrospinning technique. The piezoelectric properties have been analyzed by determining the produced voltage. The morphological assessment, contact angle, mechanical test, and MTT assay have been conducted to evaluate other properties including biocompatibility of nanofibrous scaffolds. The PCL/PANI5/BT40 composite resulted in an unprecedented voltage of 1.9 Volt. SEM results confirm that BT NPs have been distributed and embedded inside PCL fibers quite appropriately. Also, the chosen scaffolds were homogeneously intertwined and possessed an average fiber diameter of 288 ± 180 nm, and a contact angle of 92 ± 7°, making it a desirable surface for cell attachment and protein interactions. Moreover, Young's modulus, ultimate tensile stress, and elongation were obtained as 11 ± 1 MPa, 5 ± 0.6 MPa, and 109 ± 15% respectively. Obtained results assert the novel potential of piezo-electrical stimuli conductive nanocomposite scaffold for tissue engineering applications.