Synthesis of aerogels: from molecular routes to 3-dimensional nanoparticle assembly

Pseudomorphic amorphization of three-dimensional superlattices through morphological transformation of nanocrystal building blocks

Nanocrystal (NC) superlattices (SLs) have been widely studied as a new class of functional mesoscopic materials with collective physical properties. The arrangement of NCs in SLs governs the collective properties of SLs, and thus investigations of phenomena that can change the assembly of NC constituents are important. In this study, we investigated the dynamic evolution of NC arrangements in three-dimensional (3D) SLs, specifically the morphological transformation of NC constituents during the direct liquid-phase synthesis of 3D NC SLs. Electron microscopy and synchrotron-based in situ small angle X-ray scattering experiments revealed that the transformation of spherical Cu2S NCs in face-centred-cubic 3D NC SLs into anisotropic disk-shaped NCs collapsed the original ordered close-packed structure. The random crystallographic orientation of spherical Cu2S NCs in starting SLs also contributed to the complete disordering of the NC array via random-direction anisotropic growth of NCs. This work demonstrates that an understanding of the anisotropic growth kinetics of NCs in the post-synthesis modulation of NC SLs is important for tuning NC array structures.

Silica-Cyclodextrin Hybrid Materials: Two Possible Synthesis Processes

Both cyclodextrin (CD) and porous silica possess interesting properties of adsorption and release. A silica-CD hybrid, therefore, could synergically merge the properties of the two components, giving rise to a material with appealing properties for both environmental and pharmaceutical applications. With this aim, in the present study, a first hybrid is obtained through one-pot sol-gel synthesis starting from CD and tetramethyl orthosilicate (TMOS) as a silica precursor. In particular, methyl-β-cyclodextrin (bMCD) is selected for this purpose. The obtained bMCD-silica hybrid is a dense material containing a considerable amount of bMCD (45 wt.%) in amorphous form and therefore represents a promising support. However, since a high specific surface area is desirable to increase the release/adsorption properties, an attempt is made to produce the hybrid material in the form of an aerogel. Both the synthesis of the gel and its drying in supercritical CO2 are optimized in order to reach this goal. All the obtained samples are characterized in terms of their physico-chemical properties (infra-red spectroscopy, thermogravimetry) and structure (X-ray diffraction, electron microscopy) in order to investigate their composition and the interaction between the organic component (bMCD) and the inorganic one (silica).

Magnetite nanoparticles decorated on cellulose aerogel for p-nitrophenol Fenton degradation: Effects of the active phase loading, cross-linker agent and preparation method

Magnetite nanoparticles (Fe3O4 NPs) are among the most effective Fenton-Like heterogeneous catalysts for degrading environmental contaminants. However, Fe3O4 NPs aggregate easily and have poor dispersion stability because of their magnetic properties, which seriously decrease their catalytic efficiency. In this study, a novel environmentally friendly method for synthesising Fe3O4@CA was proposed. Fe3O4 NPs were immobilized on the 3D cellulose aerogels (CAs) in order to augment the degradation efficiency of p-nitrophenol (PNP) treatment and make the separation of the catalyst accessible by vacuum filtration method. Besides, CAs were fabricated from a cellulose source extracted from water hyacinth by using different cross-linking agents, such as kymene (KM) and polyvinyl alcohol-glutaraldehyde system (PVA-GA), and other drying methods, including vacuum thermal drying and freeze drying, were evaluated in the synthesis process. As-synthesized samples were analysed by various methods, including Powder X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, energy dispersive X-ray analysis and Brunauer-Emmett-Teller. Then, using ultraviolet-visible spectroscopy, the difference in the degradability of PNP of the obtained material samples was also investigated to determine their potential applications. Results highlighted that the Fe3O4-3@CA-KF catalyst with an Fe3O4 loading of 0.40 g/gCA used KM as a cross-linker and the freeze-drying method demonstrated the highest PNP removal efficiency (92.5 %) in all Fe3O4@CA samples with a H2O2 content of 5 g/L. The degradation kinetics and well-fitted pseudo-first-order model were investigated. Notably, after five successive PNP degradation experiments, this catalyst retained ∼80 % of the ability to degrade PNP, indicating its outstanding reusability. In environmental remediation, this study provides valuable insights into the development of simply separated and high-efficiency catalysts for heterogeneous catalytic reactions.

Microwave-Assisted Synthesis of Iron-Based Aerogels with Tailored Textural and Morphological Properties

Iron aerogels have been synthesized by microwave heating for the first time. Therefore, it is essential to optimize this synthesis process to evaluate the possibility of obtaining nanometric materials with tailored properties and fitting them to the needs of different applications. Herein, the effect of the ratio between reagents and the time of synthesis on the final textural, morphological, and structural properties has been evaluated. The micro-meso-macroporosity of the samples can be tailored by modifying the ratio between reagents, whereas the time of synthesis has only a slight effect on the microporosity. Both the proportion between reagents and the time of synthesis are essential to controlling the nanometric morphology, making it possible to obtain either cluster- or flake-type structures. Regarding the chemical and structural composition, the samples are mainly composed of iron(II) and iron(III) oxides. However, the percentage of iron(II) can be modulated by changing the ratio between reagents, which implies that it is possible to obtain materials from highly magnetic materials to materials without magnetic properties. This control over the properties of iron aerogels opens a new line of opportunities for the use of this type of material in several fields of applications such as electrochemistry, electrocatalysis, and electrical and electronic engineering.

Large-scale assembly of isotropic nanofiber aerogels based on columnar-equiaxed crystal transition

Ice-templating technology holds great potential to construct industrial porous materials from nanometers to the macroscopic scale for tailoring thermal, electronic, or acoustic transport. Herein, we describe a general ice-templating technology through freezing the material on a rotating cryogenic drum surface, crushing it, and then re-casting the nanofiber slurry. Through decoupling the ice nucleation and growth processes, we achieved the columnar-equiaxed crystal transition in the freezing procedure. The highly random stacking and integrating of equiaxed ice crystals can organize nanofibers into thousands of repeating microscale units with a tortuous channel topology. Owing to the spatially well-defined isotropic structure, the obtained Al2O3·SiO2 nanofiber aerogels exhibit ultralow thermal conductivity, superelasticity, good damage tolerance, and fatigue resistance. These features, together with their natural stability up to 1200 °C, make them highly robust for thermal insulation under extreme thermomechanical environments. Cascading thermal runaway propagation in a high-capacity lithium-ion battery module consisting of LiNi0.8Co0.1Mn0.1O2 cathode, with ultrahigh thermal shock power of 215 kW, can be completely prevented by a thin nanofiber aerogel layer. These findings not only establish a general production route for nanomaterial assemblies that is conventionally challenging, but also demonstrate a high-energy-density battery module configuration with a high safety standard that is critical for practical applications.

Investigation of the Photocatalytic Hydrogen Production of Semiconductor Nanocrystal-Based Hydrogels

Destabilization of a ligand-stabilized semiconductor nanocrystal solution with an oxidizing agent can lead to a macroscopic highly porous self-supporting nanocrystal network entitled hydrogel, with good accessibility to the surface. The previously reported charge carrier delocalization beyond a single nanocrystal building block in such gels can extend the charge carrier mobility and make a photocatalytic reaction more probable. The synthesis of ligand-stabilized nanocrystals with specific physicochemical properties is possible, thanks to the advances in colloid chemistry made in the last decades. Combining the properties of these nanocrystals with the advantages of nanocrystal-based hydrogels will lead to novel materials with optimized photocatalytic properties. This work demonstrates that CdSe quantum dots, CdS nanorods, and CdSe/CdS dot-in-rod-shaped nanorods as nanocrystal-based hydrogels can exhibit a much higher hydrogen production rate compared to their ligand-stabilized nanocrystal solutions. The gel synthesis through controlled destabilization by ligand oxidation preserves the high surface-to-volume ratio, ensures the accessible surface area even in hole-trapping solutions and facilitates photocatalytic hydrogen production without a co-catalyst. Especially with such self-supporting networks of nanocrystals, the problem of colloidal (in)stability in photocatalysis is circumvented. X-ray photoelectron spectroscopy and photoelectrochemical measurements reveal the advantageous properties of the 3D networks for application in photocatalytic hydrogen production.

Conducting ITO Nanoparticle-Based Aerogels—Nonaqueous One-Pot Synthesis vs. Particle Assembly Routes

Indium tin oxide (ITO) aerogels offer a combination of high surface area, porosity and conductive properties and could therefore be a promising material for electrodes in the fields of batteries, solar cells and fuel cells, as well as for optoelectronic applications. In this study, ITO aerogels were synthesized via two different approaches, followed by critical point drying (CPD) with liquid CO2. During the nonaqueous one-pot sol–gel synthesis in benzylamine (BnNH2), the ITO nanoparticles arranged to form a gel, which could be directly processed into an aerogel via solvent exchange, followed by CPD. Alternatively, for the analogous nonaqueous sol–gel synthesis in benzyl alcohol (BnOH), ITO nanoparticles were obtained and assembled into macroscopic aerogels with centimeter dimensions by controlled destabilization of a concentrated dispersion and CPD. As-synthesized ITO aerogels showed low electrical conductivities, but an improvement of two to three orders of magnitude was achieved by annealing, resulting in an electrical resistivity of 64.5–1.6 kΩ·cm. Annealing in a N2 atmosphere led to an even lower resistivity of 0.2–0.6 kΩ·cm. Concurrently, the BET surface area decreased from 106.2 to 55.6 m2/g with increasing annealing temperature. In essence, both synthesis strategies resulted in aerogels with attractive properties, showing great potential for many applications in energy storage and for optoelectronic devices.

Dispersible SnO2 :Sb and TiO2 Nanocrystals After Calcination at High Temperature

High-temperature treatment of functional nanomaterials, through postsynthesis calcination, often represents an important step to unlock their full potential. However, such calcination steps usually severely limit the preparation of colloidal solutions of the nanoparticles due to the formation of sintered agglomerates. Herein, a simple route is reported to obtain colloidal solutions of calcined n-conductive antimony doped tin oxide (ATO) as well as titanium dioxide (TiO₂ ) nanoparticles without the need for additional sacrificial materials. This is achieved by making use of the reduced contact between individual nanoparticles when they are assembled into aerogels. Following the calcination of the aerogels at 500 °C, redispersion of the nanoparticles into stable colloidal solutions with various solvents can be achieved. Although a slight degree of sintering is inevitable, the size of the resulting aggregates in solution is still remarkably small with values below 30 nm.

Alpha Al2O3 Nanosheet-Based Biphasic Aerogels with High-Temperature Resistance up to 1600 °C

Alumina aerogels are desirable for lightweight and highly efficient thermal insulation. However, they are typically constrained by brittleness and structural collapse at high temperatures. The manufacture of alumina aerogels with ultralow thermal conductivity and excellent thermal stability at high temperatures beyond 1300 °C is still challenging. Herein, alumina aerogels with superior ultrahigh-temperature-resistant and thermal insulation were successfully prepared by assembling the α-Al₂O₃ nanosheets with silica sols as the high-temperature binders. Benefiting from the generation of the mullite-covered alumina biphasic structure, the α-Al₂O₃ nanosheet-based aerogels (ANSAs) exhibit excellent thermal and chemical stabilities even after calcination at as high as 1600 °C. The ANSAs had a low thermal conductivity (0.029 W·m^-1·K^-1 at room temperature), structural stability with a measured compressive strength of 0.6 MPa, and good thermal shock resistance. Furthermore, the 2D α-alumina@mullite core-shell sheets were also prepared as assembly units to construct aerogels (AMSAs). This core-shell structure can improve temperature resistance through inter-lattice suppression under continuous energy input at high temperatures. The AMSAs have a linear shrinkage of only 2.7% after calcination at 1600 °C for 30 min, further improving the temperature resistance, making them an ideal super-insulating material for applications at extremely high temperatures.

Hydrogen Production by N-Heterocycle Dehydrogenation over Pd Supported on Aerogel-Prepared Mg-Al Oxides

Tetradecahydrophenazine (14HP) is a nitrogen-containing heterocycle compound with a high content of hydrogen that can be released during its dehydrogenation to phenazine (P). The high stability of the 14HP/P pair and relatively low dehydrogenation temperature make 14HP a promising organic hydrogen carrier. This manuscript is devoted to the investigation of hydrogen production by 14HP dehydrogenation over Pd supported on a series of magnesium-aluminum oxides prepared by the aerogel method. This technique made it possible to synthesize catalyst supports characterized by a high surface area and high concentration of surface active sites where active transition metals could be stabilized in a finely dispersed state. The synthesized aerogels had high specific surface areas and pore volumes. A surface area as high as 600 m2/g after calcination at 500 °C was observed for the mixed aerogel with an Mg:Al ratio of 1:4. An increase in the concentration of acidic electron-acceptor sites determined by EPR on the surface of the mixed magnesium-aluminum oxide supports with a high surface area prepared by the aerogel method was found to result in higher hydrogen production due to the faster dehydrogenation of sterically hindered nitrogen-containing tetradecahydrophenazine heterocycles.

Using small angle x-ray scattering to examine the aggregation mechanism in silica nanoparticle-based ambigels for improved optical clarity

Silica-based aerogels are a promising low-cost solution for improving the insulation efficiency of single-pane windows and reducing the energy consumption required for space heating and cooling. Two key material properties required are high porosity and small pore sizes, which lead to low thermal conductivity and high optical transparency, respectively. However, porosity and pore size are generally directly linked, where high porosity materials also have large pore sizes. This is unfavorable as large pores scatter light, resulting in reduced transmittance in the visible regime. In this work, we utilized preformed silica colloids to explore methods for reducing pore size while maintaining high porosity. The use of preformed colloids allows us to isolate the effect of solution conditions on porous gel network formation by eliminating simultaneous nanoparticle growth and aggregation found when using typical sol-gel molecular-based silica precursors. Specifically, we used in situ synchrotron-based small-angle x-ray scattering during gel formation to better understand how pH, concentration, and colloid size affect particle aggregation and pore structure. Ex situ characterization of dried gels demonstrates that peak pore widths can be reduced from 15 to 13 nm, accompanied by a narrowing of the overall pore size distribution, while maintaining porosities of 70%-80%. Optical transparency is found to increase with decreasing pore sizes while low thermal conductivities ranging from 95 +/- 13 mW/m K are maintained. Mechanical performance was found to depend primarily on effective density and did not show a significant dependence on solution conditions. Overall, our results provide insights into methods to preserve high porosity in nanoparticle-based aerogels while improving optical transparency.

Constitutionally Selective Dynamic Covalent Nanoparticle Assembly

The future of materials chemistry will be defined by our ability to precisely arrange components that have considerably larger dimensions and more complex compositions than conventional molecular or macromolecular building blocks. However, exerting structural and constitutional control in the assembly of nanoscale entities presents a considerable challenge. Dynamic covalent nanoparticles are emerging as an attractive category of reaction-enabled solution-processable nanosized building block through which the rational principles of molecular synthetic chemistry can be extended into the nanoscale. From a mixture of two hydrazone-based dynamic covalent nanoparticles with complementary reactivity, specific molecular instructions trigger selective assembly of intimately mixed heteromaterial (Au–Pd) aggregates or materials highly enriched in either one of the two core materials. In much the same way as complementary reactivity is exploited in synthetic molecular chemistry, chemospecific nanoparticle-bound reactions dictate building block connectivity; meanwhile, kinetic regioselectivity on the nanoscale regulates the detailed composition of the materials produced. Selectivity, and hence aggregate composition, is sensitive to several system parameters. By characterizing the nanoparticle-bound reactions in isolation, kinetic models of the multiscale assembly network can be constructed. Despite ignoring heterogeneous physical processes such as aggregation and precipitation, these simple kinetic models successfully link the underlying molecular events with the nanoscale assembly outcome, guiding rational optimization to maximize selectivity for each of the three assembly pathways. With such predictive construction strategies, we can anticipate that reaction-enabled nanoparticles can become fully incorporated in the lexicon of synthetic chemistry, ultimately establishing a synthetic science that manipulates molecular and nanoscale components with equal proficiency.

The Importance of the Macroscopic Geometry in Gas-Phase Photocatalysis

Photocatalysis has the potential to make a major technological contribution to solving pressing environmental and energy problems. There are many strategies for improving photocatalysts, such as tuning the composition to optimize visible light absorption, charge separation, and surface chemistry, ensuring high crystallinity, and controlling particle size and shape to increase overall surface area and exploit the reactivity of individual crystal facets. These processes mainly affect the nanoscale and are therefore summarized as nanostructuring. In comparison, microstructuring is performed on a larger size scale and is mainly concerned with particle assembly and thin film preparation. Interestingly, most structuring efforts stop at this point, and there are very few examples of geometry optimization on a millimeter or even centimeter scale. However, the recent work on nanoparticle-based aerogel monoliths has shown that this size range also offers great potential for improving the photocatalytic performance of materials, especially when the macroscopic geometry of the monolith is matched to the design of the photoreactor. This review article is dedicated to this aspect and addresses some issues and open questions that arise when working with macroscopically large photocatalysts. Guidelines are provided that could help develop novel and efficient photocatalysts with a truly 3D architecture.

Assembling Inorganic Nanocrystal Gels

Inorganic nanocrystal gels retain distinct properties of individual nanocrystals while offering tunable, network-structure-dependent characteristics. We review different mechanisms for assembling gels from colloidal nanocrystals including (1) controlled destabilization, (2) direct bridging, (3) depletion, as well as linking mediated by (4) coordination bonding or (5) dynamic covalent bonding, and we highlight how each impacts gel properties. These approaches use nanocrystal surface chemistry or the addition of small molecules to mediate inter-nanocrystal attractions. Each method offers advantages in terms of gel stability, reversibility, or tunability and presents new opportunities for the design of reconfigurable materials and fueled assemblies.

Viscoelasticity Investigation of Semiconductor NP (CdS and PbS) Controlled Biomimetic Nanoparticle Hydrogels

The viscoelastic properties of colloidal nanoparticles (NPs) make opportunities to construct novel compounds in many different fields. The interparticle forces of inorganic particles on colloidal NPs are important for forming a mechanically stable particulate network especially the NP-based soft matter in the self-assembly process. Here, by capping with the same surface ligand L-glutathione (GSH), two semiconductor NP (CdS and PbS) controlled biomimetic nanoparticle hydrogels were obtained, namely, CdS@GSH and PbS@GSH. The dependence of viscoelasticity of colloidal suspensions on NP sizes, concentrations, and pH value has been investigated. The results show that viscoelastic properties of CdS@GSH are stronger than those of PbS@GSH because of stronger surface bonding ability of inorganic particles and GSH. The hydrogels formed by the smaller NPs demonstrate the higher stiffness due to the drastic change of GSH configurations. Unlike the CdS@GSH hydrogel system, the changes of NP concentrations and pH value had great influence on the PbS@GSH hydrogel system. The higher the proportion of water in the small particle size PbS@GSH hydrogel system, the greater the mechanical properties. The stronger the alkalinity in the large particle size PbS@GSH hydrogel system, the greater the hardness and storage modulus. Solution˗state nuclear magnetic resonance (NMR) indicated that the ligand GSH forms surface layers with different thickness varying from different coordination modes which are induced by different semiconductor NPs. Moreover, increasing the pH value of the PbS@GSH hydrogel system will dissociate the surface GSH molecules to form Pb²⁺ and GSH complexes which could enhance the viscoelastic properties.

Aerogels as promising materials for antibacterial applications: a mini-review

The increasing cases of bacterial infections originating from resistant bacteria are a serious problem globally and many approaches have been developed for different purposes to treat bacterial infections. Aerogels are a novel class of smart porous materials composed of three-dimensional networks. Recently, aerogels with the advantages of ultra-low density, high porosity, tunable particle and pore sizes, and biocompatibility have been regarded as promising carriers for the design of delivery systems. Recently, aerogels have also been provided with antibacterial activity through loading of antibacterial agents, incorporation of metal/metal oxides and via surface functionalization and coating with various functional groups. In this mini-review, the synthesis of aerogels from both conventional and low-cost precursors is reported and examples of aerogels displaying antibacterial properties are summarized. As a result, it is clear that the encouraging antibacterial performance of aerogels promotes their use in many antibacterial applications, especially in the food industry, pharmaceutics and medicine.

Surfactant-Free Synthesis of Three-Dimensional Metallic Nanonetworks via Nanobubble-Assisted Self-Assembly

Three-dimensional metallic nanonetworks (3D-MNWs) demonstrate unique performances across a wide range of fields, and their facile and green synthetic method is of high significance. Herein, we report a self-generated-nanobubble scaffolding strategy for the fabrication of 3D-MNWs, which employs aqua ammonia (AA) as a nanobubble reservoir and avoids the use of any surfactants or polymeric capping agents. Benefiting from the interaction between ammonia and metallic nanoparticles, finely interlocked nanonetworks (Au, Pt, Ag, and Cu) with curved geometry and abundant pores are obtained by precisely controlling the anisotropic kinetic growth using a strong reducing agent and a high concentration of AA. As a demonstration, the methanol oxidation reaction (MOR) is tested to assess the electrocatalytic performance of the Pt 3D-MNWs. The peak current of Pt 3D-MNWs reaches 152 mA/mg^Pt, which is 2.5 times higher than that of commercial Pt black. This unique nanobubble-assisted strategy has great potential in the basic synthetic prototype for polyporous nanomaterials.

Fabrication and application of macroscopic nanowire aerogels

Assembly of nanowires into three-dimensional macroscopic aerogels not only bridges a gap between nanowires and macroscopic bulk materials but also combines the benefits of two worlds: unique structural features of aerogels and unique physical and chemical properties of nanowires, which has triggered significant progress in the design and fabrication of nanowire-based aerogels for a diverse range of practical applications. This article reviews the methods developed for processing nanowires into three-dimensional monolithic aerogels and the applications of the resultant nanowire aerogels in many emerging fields. Detailed discussions are given on gelation mechanisms involved in every preparation method and the pros and cons of the different methods. Furthermore, we systematically scrutinize the application of nanowire-based aerogels in the fields of thermal management, energy storage and conversion, catalysis, adsorbents, sensors, and solar steam generation. The unique benefits offered by nanowire-based aerogels in every application field are clarified. We also discuss how to improve the performance of nanowire-based aerogels in those fields by engineering the compositions and structures of the aerogels. Finally, we provide our perspectives on future development of nanowire-based aerogels.

Interfacial Engineering to Tailor the Properties of Multifunctional Ultralight Weight hBN-Polymer Composite Aerogels

A common feature of aerogels is that they are brittle and suffer from poor mechanical properties. The development of high-performance, lightweight, and mechanically robust polymer composite aerogels may find use in a broad range of applications such as packaging, transportation, construction, electronics, and aerospace. Most aerogels are made of ceramic materials, such as silica, alumina, and carbide. These aerogels are dense and brittle. Two-dimensional (2D) layered nanostructures such as graphene, graphene oxide and hexagonal boron nitride (hBN) have promising potential in emerging technologies including those involved in extreme environmental conditions because they can withstand high temperatures, harsh chemical environments, and corrosion. Here, we report the development of highly porous, ultralightweight, and flexible aerogel composites made by the infiltration of various polymers into 2D hBN aerogels. The 2D hBN aerogels in which pore size could be controlled were fabricated using a unique self-assembly approach involving polystyrene nanoparticles as templates for ammonia borane into desired structures. We have shown that the physical, mechanical, and thermal properties of hBN-polymer composite aerogels can be tuned by the infiltration of different additives. We also performed theoretical calculations to gain insight into the interfacial interactions between the hBN-polymer structure, as the interface is critical in determining key material properties.

Printed aerogels: chemistry, processing, and applications

As an extraordinarily lightweight and porous functional nanomaterial family, aerogels have attracted considerable interest in academia and industry in recent decades. Despite the application scopes, the modest mechanical durability of aerogels makes their processing and operation challenging, in particular, for situations demanding intricate physical structures. "Bottom-up" additive manufacturing technology has the potential to address this drawback. Indeed, since the first report of 3D printed aerogels in 2015, a new interdisciplinary research area combining aerogel and printing technology has emerged to push the boundaries of structure and performance, further broadening their application scope. This review summarizes the state-of-the-art of printed aerogels and presents a comprehensive view of their developments in the past 5 years, and highlights the key near- and mid-term challenges.

Solvent Vapor Strengthened Polyimide Nanofiber-Based Aerogels with High Resilience and Controllable Porous Structure

Owing to the hierarchically three-dimensional (3D) network, ultralow density, and high porosity, nanofiber-based aerogels (NFAs) have drawn great attention recently. However, precise control of the porous structure and mechanical properties of NFAs, which have been proved to be extremely essential to the applications, still remains a major challenge. Herein, electrospun polyimide (PI) nanofibers were utilized as building blocks to construct NFAs through the solid-templating technique. The porous structure of PI nanofiber-based aerogels (PI-NFAs) could be adjusted by changing the processing parameters. By further welding the adjacent nanofibers at the contact sites with solvent vapor, high-resilience PI-NFAs were successfully prepared with comparable or higher recoverable, under compression, folding and torsion relative to other NFAs. The welded PI-NFAs showed ultralow density (minimum of 0.96 mg/cm³), high porosity (maximum of 99.93%), and tunable hierarchical structure. Therefore, this study brought a new perspective on the simple preparation of high-resilience nanofiber-based aerogels with tunable porous structures.

Synthesis of a Crystalline and Transparent Aerogel Composed of Ni-Al Layered Double Hydroxide Nanoparticles through Crystallization from Amorphous Hydrogel

Enormous efforts have been devoted to the development of crystalline aerogels toward heterogeneous catalysis, energy storage, ion/molecular absorption, and luminescence. However, properties of aerogels are not fully exploited due to their low content of functional moieties embedded in their solid networks, low crystallinity, and limited chemical compositions. Herein, we develop a one-pot approach based on crystallization from amorphous metal hydroxides modified with a β-diketone ligand, toward crystalline transition-metal hydroxide aerogels. Synthesis of monolithic and crystalline aerogels of layered double hydroxide (LDH) was performed in a Ni-Al system starting from aqueous ethanol solutions of NiCl₂·6H₂O and AlCl₃·6H₂O with acetylacetone (acac) as an organic ligand. Propylene oxide (PO) as an alkalization reagent was added into precursory solutions to yield monolithic wet gels. The successive pH increase induces the formation of a three-dimensional (3-D) solid framework composed of amorphous Al(OH)₃. Then, amphoteric Al(OH)₃ undergoes crystallization into Ni-Al LDH via an acetylacetone-driven dissolution-crystallization of metal hydroxides without destroying the preformed 3-D solid framework. The process allows us to obtain crystalline aerogel monoliths with high porosity and high transparency after supercritical CO₂ drying of wet gels. The present scheme can be expected to synthesize functionalized aerogel composed of crystalline transition-metal oxide/hydroxide nanobuilding blocks (NBBs).

Anomalous Anisotropic Nanoparticle Aggregation in Cu2(OH)3Br Gels

Aerogels are of interest for their ability to uniformly incorporate nanoscale features into macroscopic assemblies, which enabled applications that require low density, high surface area, and/or bicontinuous networks. The structure of the nanoporous network is intrinsically linked to the macroscopic properties of aerogels. Hence, control of this structure is of paramount importance. Small-angle X-ray scattering (SAXS) is used here to monitor nanoparticle aggregation in situ in Cu₂(OH)₃Br aerogels formed via epoxide-assisted gelation. Anomalous anisotropic aggregation is observed in the absence of templating agents and is attributed to the molecular structure of the inorganic nanoparticles themselves. This is a fundamental departure from the models currently used to describe traditional inorganic sol-gel chemistry where nanoparticles are believed to undergo isotropic diffusion- and/or kinetically limited aggregation. Time-resolved SAXS indicates that Cu₂(OH)₃Br nanoparticles nucleate rapidly from solution to form unbranched chain-like aggregates rather than branched mass-fractal aggregates. Sizes of primary particles (∼1.5 nm) and the chain-like structure of their aggregates are independent of particle concentration (gel density), while rates of particle aggregation, gelation time, and aggregate size are strongly dependent upon particle concentration, which implies that the chemistry of particle formation and the physics of particle aggregation are independent processes. Because the conditions necessary for creating anisotropic structures are not unique to Cu₂(OH)₃Br, these results could provide insight into the structure and gelation mechanisms of other inorganic aerogels.

Tailoring the Morphology and Fractal Dimension of 2D Mesh-like Gold Gels

As there is a great demand of 2D metal networks, especially out of gold for a plethora of applications we show a universal synthetic method via phase boundary gelation which allows the fabrication of networks displaying areas of up to 2 cm². They are transferred to many different substrates: glass, glassy carbon, silicon, or polymers such as PDMS. In addition to the standardly used web thickness, the networks are parametrized by their fractal dimension. By variation of experimental conditions, we produced web thicknesses between 4.1 nm and 14.7 nm and fractal dimensions in the span of 1.56 to 1.76 which allows to tailor the structures to fit for various applications. Furthermore, the morphology can be tailored by stacking sheets of the networks. For each different metal network, we determined its optical transmission and sheet resistance. The obtained values of up to 97 % transparency and sheet resistances as low as 55.9 Ω/sq highlight the great potential of the obtained materials.

Modern Chemical Routes for the Controlled Synthesis of Anisotropic Bimetallic Nanostructures and Their Application in Catalysis

Bimetallic nanoparticles (BNPs) have attracted greater attention compared to its monometallic counterpart because of their chemical/physical properties. The BNPs have a wide range of applications in the fields of health, energy, water, and environment. These properties could be tuned with a number of parameters such as compositions of the bimetallic systems, their preparation method, and morphology. Monodisperse and anisotropic BNPs have gained considerable interest and numerous efforts have been made for the controlled synthesis of bimetallic nanostructures (BNS) of different sizes and shapes. This review offers a brief summary of the various synthetic routes adopted for the synthesis of Palladium(Pd), Platinum(Pt), Nickel(Ni), Gold(Au), Silver(Ag), Iron(Fe), Cobalt(Co), Rhodium(Rh), and Copper(Cu) based transition metal bimetallic anisotropic nanostructures, growth mechanisms e.g., seed mediated co-reduction, hydrothermal, galvanic replacement reactions, and antigalvanic reaction, and their application in the field of catalysis. The effect of surfactant, reducing agent, metal precursors ratio, pH, and reaction temperature for the synthesis of anisotropic nanostructures has been explained with examples. This review further discusses how slight modifications in one of the parameters could alter the growth mechanism, resulting in different anisotropic nanostructures which highly influence the catalytic activity. The progress or modification implied in the synthesis techniques within recent years is focused on in this article. Furthermore, this article discussed the improved activity, stability, and catalytic performance of BNS compared to the monometallic performance. The synthetic strategies reported here established a deeper understanding of the mechanisms and development of sophisticated and controlled BNS for widespread application.

Boron nitride aerogels consisting of varied superstructures

As a porous material with a nanoscale skeleton, aerogel serves as a bridge between the nano- and macro-world. The integration of nanostructures into aerogels not only allows the combination of multidimensional features but also implies the possibility of unexpected properties. With great potential in many fields, boron nitride (BN) nanostructures have garnered growing attention and their existence in the aerogel state holds even more promise. However, the existing fabrication routes in the aerogel field, despite their validity and effectiveness, provide no panacea and are challenged by those incompatible with the current preparation toolbox, among which BN stands out. Herein, a multilevel assembly scheme is demonstrated for the elegant fabrication of BN aerogels consisting of varied superstructures, i.e., nanoribbons composed of tiny nanocrystals and nest-like structures tangled by nanofibers, the realization of which via the traditional molecular route or the classic assembly route is rather difficult. Interestingly, the resultant aerogels were found to exhibit great contrast in their hydrophilicity, which could be attributed to the microstructure difference. This study may raise the prospects of BN in energy, environment, bio-applications, etc. It may also give inspirations for the incorporation of other complex structures into aerogels.

Hierarchical microfibrillar gels from evaporation-induced anisotropic self-assembly of in situ-generated nanocrystals

Whilst nanocrystal gels may be formed via destabilization of pre-functionalized nanocrystal dispersions, gelation via assembly of unfunctionalized nanocrystals into fibrillar networks remains a significant challenge. Here, we show that gels with hierarchical microfibrillar networks are formed from anisotropic self-assembly of in situ-generated mesolamellar nanocrystals upon evaporation of ZnO nanofluids. The obtained gels display the thermo-reversible behavior characteristic of a non-covalent physical gel. We elucidate a three-stage gelation mechanism. In the pre-nucleation stage, the cloudy ZnO nanofluid transforms into a transparent stable suspension, comprising multi-branched networks of aggregates self-assembled from in situ-generated layered zinc hydroxide (LZH) nanocrystals upon solvent evaporation. In the subsequent nucleation and anisotropic 1D fibre growth stage, further evaporation triggers nucleation and growth of 1D nanofibers through reorganization of the nanocrystal aggregates, before rapid nanofibre bundling leading to microfibrillar networks in the ultimate gelation stage. Our results provide mechanistic insights for hierarchical self-assembly of nanocrystals into fibrillar gels and open up facile fabrication routes using reactive transition metal-oxide nanofluids for new functional fibres and gels.

Rare-Earth Zirconate Ln2Zr2O7 (Ln: La, Nd, Gd, and Dy) Powders, Xerogels, and Aerogels: Preparation, Structure, and Properties

The physicochemical properties of rare-earth zirconates can be tuned by the rational modification of their structures and phase compositions. In the present work, La³⁺-, Nd³⁺-, Gd³⁺-, and Dy³⁺-zirconate nanostructured materials were prepared by different synthetic protocols, leading to powders, xerogels, and, for the first time, monolithic aerogels. Powders were synthesized by the co-precipitation method, while xerogels and aerogels were synthesized by the sol-gel technique, followed by ambient and supercritical drying, respectively. Their microstructures, thermogravimetric profiles, textural properties, and crystallographic structures are reported. The co-precipitation method led to dense powders (S_BET < 1 m² g^-1), while the sol-gel technique resulted in large surface area xerogels (S_BET = 144 m² g^-1) and aerogels (S_BET = 168 m² g^-1). In addition, the incorporation of lanthanide ions into the zirconia lattice altered the crystal structures of the powders, xerogels, and aerogels. Single-phase pyrochlores were obtained for La₂Zr₂O₇ and Nd₂Zr₂O₇ powders and xerogels, while defect fluorite structures formed in the case of Gd₂Zr₂O₇ and Dy₂Zr₂O₇. All aerogels contain a mixture of cubic and tetragonal ZrO₂ phases. Thus, a direct effect is shown between the drying conditions and the resulting crystalline phases of the nanostructured rare-earth zirconates.

Lead-Free Antimony-Based Light-Emitting Diodes through the Vapor-Anion-Exchange Method

Hybrid lead halide perovskites continue to attract interest for use in optoelectronic devices such as solar cells and light-emitting diodes. Although challenging, the replacement of toxic lead in these systems is an active field of research. Recently, the use of trivalent metal cations (Bi³⁺ and Sb³⁺) that form defect perovskites A₃B₂X₉ has received great attention for the development of solar cells, but their light-emissive properties have not previously been studied. Herein, an all-inorganic antimony-based two-dimensional perovskite, Cs₃Sb₂I₉, was synthesized using the solution process. Vapor-anion-exchange method was employed to change the structural composition from Cs₃Sb₂I₉ to Cs₃Sb₂Br₉ or Cs₃Sb₂Cl₉ by treating CsI/SbI₃ spin-coated films with SbBr₃ or SbCl₃, respectively. This novel method facilitates the fabrication of Cs₃Sb₂Br₉ or Cs₃Sb₂Cl₉ through solution processing without the need of using poorly soluble precursors (e.g., CsCl and CsBr). We go on to demonstrate electroluminescence from a device employing Cs₃Sb₂I₉ emitter sandwiched between ITO/PEDOT:PSS and TPBi/LiF/Al as the hole and electron injection electrodes, respectively. A visible-infrared radiance of 0.012 W·Sr^-1·m^-2 was measured at 6 V when Cs₃Sb₂I₉ was the active emitter layer. These proof-of-principle devices suggest a viable path toward low-dimensional, lead-free A₃B₂X₉ perovskite optoelectronics.

Diffusion- and reaction-limited cluster aggregation revisited

We simulated irreversible aggregation of non-interacting particles and of particles interacting via repulsive and attractive potentials explicitly implementing the rotational diffusion of aggregating clusters. Our study confirms that the attraction between particles influences neither the aggregation mechanism nor the structure of the aggregates, which are identical to those of non-interacting particles. In contrast, repulsive particles form more compact aggregates and their fractal dimension and aggregation times increase with the decrease of the temperature. A comparison of the fractal dimensions obtained for non-rotating clusters of non-interacting particles and for rotating clusters of repulsive particles provides an explanation for the conformity of the respective values obtained earlier in the well established model of diffusion-limited cluster aggregation neglecting rotational diffusion and in experiments on colloidal particles.

Fabrication of Au aerogels with {110}-rich facets by size-dependent surface reconstruction for enzyme-free glucose detection

Au^6–50 aerogels with {110}-rich facets (35.5%) are fabricated for glucose detection by size-dependent surface reconstruction between two differently-sized gold nanoparticles.

Nanoporous Metallic Networks: Fabrication, Optical Properties, and Applications

Nanoporous metallic networks are a group of porous materials made of solid metals with suboptical wavelength sizes of both particles and voids. They are characterized by unique optical properties, as well as high surface area and permeability of guest materials. As such, they attract a great focus as novel materials for photonics, catalysis, sensing, and renewable energy. Their properties together with the ability for scaling-up evoke an increased interest also in the industrial field. Here, fabrication techniques of large-scale metallic networks are discussed, and their interesting optical properties as well as their applications are considered. In particular, the focus is on disordered systems, which may facilitate the fabrication technique, yet, endow the three-dimensional (3D) network with distinct optical properties. These metallic networks bridge the nanoworld into the macroscopic world, and therefore pave the way to the fabrication of innovative materials with unique optoelectronic properties.

Design and Application of High Optical Quality YAG:Ce Nanocrystal-Loaded Silica Aerogels

The intrinsic properties of silica aerogels make them well suited for applications requiring high surface area. Therefore, the dispersion of functional nanoparticles (NPs) in these highly porous structures gives access to materials for wide range of applications such as catalysis, energy storage or sensing. The last one is particularly interesting if such composites possess good optical quality. Herein, the synthesis of monolithic and transparent silica aerogels highly loaded with Y₃Al₅O₁₂:Ce nanocrystals (NCs) (up to 50 wt %) is reported. The developed composite aerogels can be impregnated with liquids, contrary to most of existing aerogels, which crack because of the strong capillary forces. Therefore, this system is designed as a novel concept of 3D porous scintillator, using the efficient photoluminescent and scintillating properties of Y₃Al₅O₁₂:Ce. The investigated fluid containing low-energetic ionizing radiation emitters impregnates the material, which assures the efficient harvesting of radiation because of highly developed surface area. Such composites prove to be efficient new-type detectors of low-energy beta radiation both in liquids and gases.

Electrostatic-Driven Gelation of Colloidal Nanocrystals

The assembly of colloidal nanocrystals (NCs) is a unique strategy to produce porous materials with high crystallinity and unmatched control over structural and chemical parameters. This strategy has been demonstrated mostly for single-component nanomaterials. In the present work, we report the gelation of colloidal NC solutions driven by the electrostatic interaction of oppositely charged NCs. A key step for leading this strategy to success is to produce a stable colloidal solution of the positively charged component. We achieved this goal by functionalizing the NCs with inexpensive and nontoxic amino acids such as glutamine. We demonstrate the combination of positively and negatively charged NCs in proper concentrations to result in gels with a homogeneous distribution of the two compounds. In this way, porous nanocomposites with virtually any combination can be produced. We illustrate this approach by combining positively charged ceria NCs with negatively charged gold NCs to form Au-CeO₂ gels. These gels were dried from supercritical CO₂ to produce highly porous Au-CeO₂ aerogels with specific surface areas of 120 m² g^-1. The formation of a proper interface is confirmed through the evaluation of nanocomposite catalytic activity toward CO oxidation. We further demonstrate the versatility of this strategy to produce porous metal chalcogenide-metal oxide and metal-metal chalcogenide nanocomposites by the examples of PbS-CeO₂ and Au-PbS.

Regulating Surface Facets of Metallic Aerogel Electrocatalysts by Size-Dependent Localized Ostwald Ripening

It is well known that the activity and stability of electrocatalysts are largely dependent on their surface facets. In this work, we have successfully regulated surface facets of three-dimensional (3D) metallic Au ^{m- n} aerogels by salt-induced assembly of citrate-stabilized gold nanoparticles (Au NPs) of two different sizes and further size-dependent localized Ostwald ripening at controlled particle number ratios, where m and n represent the size of Au NPs. In addition, 3D Au ^{m- n}-Pd aerogels were further synthesized on the basis of Au ^{m- n} aerogels and also bear controlled surface facets because of the formation of ultrathin Pd layers on Au ^{m- n} aerogels. Taking the electrooxidation of small organic molecules (such as methanol and ethanol) by the resulting Au ^{m- n} and Au ^{m- n}-Pd aerogels as examples, it is found that surface facets of metallic aerogels with excellent performance can be regulated to realize preferential surface facets for methanol oxidation and ethanol oxidation, respectively. Moreover, they also indeed simultaneously bear high activity and excellent stability. Furthermore, their activities and stability are also highly dependent on the area ratio of active facets and inactive facets on their surfaces, respectively, and these ratios are varied via the mismatch of sizes of adjacent NPs. Thus, this work not only demonstrates the realization of the regulation of the surface facets of metallic aerogels by size-dependent localized Ostwald ripening but also will open up a new way to improve electrocatalytic performance of 3D metallic aerogels by surface regulation.

Metal Oxide Aerogels with Controlled Crystallinity and Faceting from the Epoxide-Driven Cross-Linking of Colloidal Nanocrystals

We present a novel method to produce crystalline oxide aerogels which is based on the cross-linking of preformed colloidal nanocrystals (NCs) triggered by propylene oxide (PO). Ceria and titania were used to illustrate this new approach. Ceria and titania colloidal NCs with tuned geometry and crystal facets were produced in solution from the decomposition of a suitable salt in the presence of oleylamine (OAm). The native surface ligands were replaced by amino acids, rendering the NCs colloidally stable in polar solvents. The NC colloidal solution was then gelled by adding PO, which gradually stripped the ligands from the NC surface, triggering a slow NC aggregation. NC-based metal oxide aerogels displayed both high surface areas and excellent crystallinity associated with the crystalline nature of the constituent building blocks, even without any annealing step. Such NC-based metal oxide aerogels showed higher thermal stability compared with aerogels directly produced from ionic precursors using conventional sol-gel chemistry strategies.

Colloidal Nanocrystal-Based BaTiO3 Xerogels as Green Bodies: Effect of Drying and Sintering at Low Temperatures on Pore Structure and Microstructures

Although aerogels prepared by the colloidal assembly of nanoparticles are a rapidly emerging class of highly porous and low-density materials, their ambient dried counterparts, namely xerogels, have hardly been explored. Here we report the use of nanoparticle-based BaTiO₃ xerogels as green bodies, which provide a versatile route to ceramic materials under the minimization of organic additives with a significant reduction of the calcination temperature compared to that of conventional powder sintering. The structural changes of the xerogels are investigated during ambient drying by carefully analyzing the microstructure at different drying stages. For this purpose, the shrinkage was arrested by a supercritical drying step under full preservation of the intermediate microstructure, giving unprecedented insight into the structural changes during ambient drying of a nanoparticle-based gel. In a first step, the large macropores shrink because of capillary forces, followed by the collapse of residual mesopores until a dense xerogel is obtained. The whole process is accompanied by a volume shrinkage of 97% and a drop in surface area from 300 to 220 m² g^-1. Finally, the xerogels are sintered, causing another shrinkage of up to 8% with a slight increase in the average pore and crystal sizes. At temperatures higher than 700 °C, an unexpected phase transition to BaTi₂O₅ is observed.

3D assembly of preformed colloidal nanoparticles into gels and aerogels: function-led design

Nanoparticle-based aerogels combine the properties of traditional aerogels with those of nanoparticles, and hold promise for various applications following a function-led design.