Engineering an in vitro model of a functional ligament from bone to bone

Hierarchy Reproduction: Multiphasic Strategies for Tendon/Ligament-Bone Junction Repair

Tendon/ligament-bone junctions (T/LBJs) are susceptible to damage during exercise, resulting in anterior cruciate ligament rupture or rotator cuff tear; however, their intricate hierarchical structure hinders self-regeneration. Multiphasic strategies have been explored to fuel heterogeneous tissue regeneration and integration. This review summarizes current multiphasic approaches for rejuvenating functional gradients in T/LBJ healing. Synthetic, natural, and organism-derived materials are available for in vivo validation. Both discrete and gradient layouts serve as sources of inspiration for organizing specific cues, based on the theories of biomaterial topology, biochemistry, mechanobiology, and in situ delivery therapy, which form interconnected network within the design. Novel engineering can be constructed by electrospinning, 3-dimensional printing, bioprinting, textiling, and other techniques. Despite these efforts being limited at present stage, multiphasic scaffolds show great potential for precise reproduction of native T/LBJs and offer promising solutions for clinical dilemmas.

Relative Energy Deficiency in Sport (REDs) and knee injuries: current concepts for female athletes

In athletes, a mismatch between caloric intake and energy expended in exercise can eventually lead to Relative Energy Deficiency in Sport (REDs), where the athlete suffers from physiological derangements and decreased sport performance. The prevalence of REDs is higher in females than males. Females are already at a higher risk of knee injuries, which has been attributed to a multitude of factors such as hormonal influences, differences in musculoskeletal anatomy and neuromuscular control compared to males. The literature demonstrates an even higher risk of knee injuries in female athletes with symptoms of REDs. We propose the various factors that influence this risk. A reduction in anabolic hormones can affect muscle development and tendon repair. A relationship between poor neuromuscular control and knee injury has been established, and this can be further worsened in patients with menstrual dysfunction. Chronic deficiency in nutrients such as collagen and vitamin D can result in poorer recovery from microtrauma in tendons and ligaments. All these factors may contribute to increasing the risk of knee injuries, which may include anterior cruciate ligament tears, patella tendinopathy and patellofemoral pain syndrome. This review aims to educate sports clinicians to have a high index of suspicion when treating knee injuries in females; to screen and then manage for REDs if present, for holistic patient care.

Saturated fatty acids negatively affect musculoskeletal tissues in vitro and in vivo

Fish oils rank among the world's most popular nutritional supplements and are purported to have numerous health benefits. Previous work suggested that fish oils increase collagen production; however, the effect of fish oils on musculoskeletal health is poorly understood. Further, the divergent effects of omega-3 (Ω3FA) and saturated fatty acids (SFA) remains poorly understood. We tested the effects of Ω3FA and SFAs on in vitro-engineered human ligament (EHL) function. EHLs were treated with bovine serum albumin (BSA)-conjugated eicosapentaenoic acid (EPA, 20:5(n-3)), palmitic acid (PA, 16:0), or a BSA control for 6 days. EPA did not significantly alter, whereas PA significantly decreased EHL function and collagen content. To determine whether this was an in vitro artifact, mice were fed a control or high-lard diet for 14 weeks and musculoskeletal mass, insulin sensitivity, and the collagen content, and mechanics of tendon and bone were determined. Body weight was 40 % higher on a HFD, but muscle, tendon, and bone mass did not keep up with body weight resulting in relative losses in muscle mass, tendon, and bone collagen, as well as mechanical properties. Importantly, we show that PA acutely decreases collagen synthesis in vitro to a similar extent as the decrease in collagen content with chronic treatment. These data suggest that Ω3FAs have a limited effect on EHLs, whereas SFA exert a negative effect on collagen synthesis resulting in smaller and weaker musculoskeletal tissues both in vitro and in vivo.

Postprandial plasma amino acid and appetite responses with ingestion of a novel salmon-derived protein peptide in healthy young adults

This study assessed postprandial plasma aminoacidemia, glycemia, insulinemia and appetite responses to ingestion of a novel salmon-derived protein peptide (Salmon PP) compared with milk protein isolate (Milk PI). In a randomised, participant-blind crossover design, eleven healthy adults (M = 5, F = 6; mean ± sd age: 22 ± 3 years; BMI: 24 ± 3 kg/m2) ingested 0·3 g/kg/body mass of Salmon PP or Milk PI. Arterialised blood samples were collected whilst fasted and over a 240-min postprandial period. Appetite sensations were measured via visual analogue scales. An ad libitum buffet-style test meal was administered after each trial. The incremental AUC (iAUC) plasma essential amino acid (EAA) response was similar between Salmon PP and Milk PI. The iAUC plasma leucine response was significantly greater following Milk PI ingestion (P < 0·001), whereas temporal and iAUC plasma total amino acid (P = 0·001), non-essential amino acid (P = 0·002), glycine (P = 0·0025) and hydroxyproline (P < 0·001) responses were greater following Salmon PP ingestion. Plasma insulin increased similarly above post-absorptive values following Salmon PP and Milk PI ingestion, whilst plasma glucose was largely unaltered. Indices of appetite were similarly altered following Salmon PP and Milk PI ingestion, and total energy and macronutrient intake during the ad libitum meal was similar between Salmon PP and Milk PI. The postprandial plasma EAA, glycine, proline and hydroxyproline response to Salmon PP ingestion suggest this novel protein source could support muscle and possibly connective tissue adaptive remodelling, which warrants further investigation, particularly as the plasma leucine response to Salmon PP ingestion was inferior to Milk PI.

Anatomical design and production of a novel three-dimensional co-culture system replicating the human flexor digitorum profundus enthesis

The enthesis, the specialized junction between tendon and bone, is a common site of injury. Although notoriously difficult to repair, advances in interfacial tissue engineering techniques are being developed for restorative function. Most notably are 3D in vitro co-culture models, built to recreate the complex heterogeneity of the native enthesis. While cell and matrix properties are often considered, there has been little attention given to native enthesis anatomical morphometrics and replicating these to enhance clinical relevance. This study focuses on the flexor digitorum profundus (FDP) tendon enthesis and, by combining anatomical morphometrics with computer-aided design, demonstrates the design and construction of an accurate and scalable model of the FDP enthesis. Bespoke 3D-printed mould inserts were fabricated based on the size, shape and insertion angle of the FDP enthesis. Then, silicone culture moulds were created, enabling the production of bespoke anatomical culture zones for an in vitro FDP enthesis model. The validity of the model has been confirmed using brushite cement scaffolds seeded with osteoblasts (bone) and fibrin hydrogel scaffolds seeded with fibroblasts (tendon) in individual studies with cells from either human or rat origin. This novel approach allows a bespoke anatomical design for enthesis repair and should be applied to future studies in this area.

Characterization of an in vitro engineered ligament model

In vivo tendon and ligament research can be limited by the difficultly of obtaining tissue samples that can be biochemically analyzed. In this study, we characterize the most widely used in vitro engineered ligament model. Despite previous works suggesting multiple passages change gene expression in 2D primary tenocytes, we found no relationship between passage number and expression of classical tendon fibroblast markers across different biological donors. When engineered into 3D ligaments, there was an increase in maximal tensile load between 7 and 14 days in culture, that corresponded with an increase in collagen content. By contrast, percent collagen increased logarithmically from Day 7 to Day 14, and this was similar to the increase in the modulus of the tissue. Importantly, there was no relationship between passage number and mechanical function or collagen content in the two independent donors tested. These results suggest that the model develops quickly and is reliable across differing passage numbers. This provides the field with the ability to 1) consistently determine functional changes of interventions out to passage number 10; and 2) to time interventions to the appropriate developmental stage: developing/regenerating (Day 7) or mature (Day 14) tissue.

Inhibiting JAK1, not NF-κB, reverses the effect of pro-inflammatory cytokines on engineered human ligament function

The role of inflammation in chronic tendon/ligament injury is hotly debated. There is less debate about inflammation following acute injury. To better understand the effect of acute inflammation, in this study we developed a multi-cytokine model of inflammatory tendinitis. The combined treatment with TNF-α, IL-1β, and IL-6, at dosages well below what are routinely used in vitro, decreased the mechanical properties and collagen content of engineered human ligaments. Treatment with this cytokine mixture resulted in an increase in phospho-NF-κB and MMP-1, did not affect procollagen production, and decreased STAT3 phosphorylation relative to controls. Using this more physiologically relevant model of acute inflammation, we inhibited NF-κB or JAK1 signaling in an attempt to reverse the negative effects of the cytokine mixture. Surprisingly, NF-κB inhibition led to an even greater decrease in mechanical function and collagen content. By contrast, inhibiting JAK1 led to an increase in mechanical properties, collagen content and thermal stability concomitant with a decrease in MMP-1. Our results suggest that inhibition of JAK1, not NF-κB, reverses the negative effects of pro-inflammatory cytokines on collagen content and mechanics in engineered human ligaments.

Enthesis maturation in engineered ligaments is differentially driven by loads that mimic slow growth elongation and rapid cyclic muscle movement

Entheses are complex attachments that translate load between elastic-ligaments and stiff-bone via organizational and compositional gradients. Neither natural healing, repair, nor engineered replacements restore these gradients, contributing to high re-tear rates. Previously, we developed a culture system which guides ligament fibroblasts in high-density collagen gels to develop early postnatal-like entheses, however further maturation is needed. Mechanical cues, including slow growth elongation and cyclic muscle activity, are critical to enthesis development in vivo but these cues have not been widely explored in engineered entheses and their individual contribution to maturation is largely unknown. Our objective here was to investigate how slow stretch, mimicking ACL growth rates, and intermittent cyclic loading, mimicking muscle activity, individually drive enthesis maturation in our system so to shed light on the cues governing enthesis development, while further developing our tissue engineered replacements. Interestingly, we found these loads differentially drive organizational maturation, with slow stretch driving improvements in the interface/enthesis region, and cyclic load improving the ligament region. However, despite differentially affecting organization, both loads produced improvements to interface mechanics and zonal composition. This study provides insight into how mechanical cues differentially affect enthesis development, while producing some of the most organized engineered enthesis to date. STATEMENT OF SIGNIFICANCE: Entheses attach ligaments to bone and are critical to load transfer; however, entheses do not regenerate with repair or replacement, contributing to high re-tear rates. Mechanical cues are critical to enthesis development in vivo but their individual contribution to maturation is largely unknown and they have not been widely explored in engineered replacements. Here, using a novel culture system, we provide new insight into how slow stretch, mimicking ACL growth rates, and intermittent cyclic loading, mimicking muscle activity, differentially affect enthesis maturation in engineered ligament-to-bone tissues, ultimately producing some of the most organized entheses to date. This system is a promising platform to explore cues regulating enthesis formation so to produce functional engineered replacements and better drive regeneration following repair.

The rat Achilles and patellar tendons have similar increases in mechanical properties but become transcriptionally divergent during postnatal development

The molecular events that drive post-natal tendon development are poorly characterized. In this study, we profiled morphological, mechanical, and transcriptional changes in the rat Achilles and patellar tendon before walking (P7), shortly after onset of walking (P14), and at motor maturity (P28). The Achilles and patellar tendons increased collagen content and mechanical strength similarly throughout post-natal development. However, at P28 the patellar tendon tended to display a higher maximal tensile load (MTL) (P = 0.0524) than the Achilles tendon, but a similar ultimate tensile strength (UTS; load relative to cross-sectional area) probably due to its increased cross-sectional area during development. The tendons started transcriptionally similar, with overlapping PCA clusters at P7 and P14, before becoming transcriptionally distinct at P28. In both tendons, there was an increase in extracellular matrix (ECM) gene expression and a concomitant decrease in cell cycle and mitochondrial gene expression. The transcriptional divergence at P28 suggested that STAT signalling was lower in the patellar tendon where MTL increased the most. Treating engineered human ligaments with the STAT inhibitor itacitinib increased collagen content and MTL. Our results suggest that during post-natal development, cellular resources are initially allocated towards cell proliferation before shifting towards extracellular matrix development following the onset of mechanical load and provide potential targets for improving tendon function. KEY POINTS: Little is known about mechanisms of post-natal tendon growth. We characterized morphological, mechanical, and transcriptional changes that occur before (P7), and early (P14) and late after (P28) rats begin to walk. From P7 to P28, the Achilles tendon increased in length, whereas the patellar tendon increased in cross-sectional area. Mechanical and material properties of the Achilles and patellar tendon increased from P7 to P28. From P7 to P28, the Achilles and patellar tendons increased expression of ECM genes and decreased mitochondrial and cell cycle gene expression. Ribosomal gene expression also significantly decreased in the Achilles and tended to decrease in the patellar tendon. At P28, STAT1 signalling tended to be lower in the patellar tendon which had grown by increasing cross-sectional area and inhibiting STAT activation in vitro improved mechanical properties in engineered human ligaments.

Advances in nutritional supplementation for sarcopenia management

Sarcopenia is a syndrome characterized by a decline in muscular mass, strength, and function with advancing age. The risk of falls, fragility, hospitalization, and death is considerably increased in the senior population due to sarcopenia. Although there is no conclusive evidence for drug treatment, resistance training has been unanimously recognized as a first-line treatment for managing sarcopenia, and numerous studies have also pointed to the combination of nutritional supplementation and resistance training as a more effective intervention to improve quality of life for people with sarcopenia. People with both malnutrition and sarcopenia have a higher mortality rate, so identifying people at risk of malnutrition and intervening early is extremely important to avoid sarcopenia and its associated problems. This article provides important information for dietary interventions in sarcopenia by summarizing the discoveries and developments of nutritional supplements such as protein, leucine, β-hydroxy-β-methylbutyric acid, vitamin D, vitamin C, vitamin E, omega-3 fatty acids, creatine, inorganic nitrate, probiotics, minerals, collagen peptides, and polyphenols in the management of sarcopenia.

Anatomical Tissue Engineering of the Anterior Cruciate Ligament Entheses

The firm integration of anterior cruciate ligament (ACL) grafts into bones remains the most demanding challenge in ACL reconstruction, since graft loosening means graft failure. For a functional-tissue-engineered ACL substitute to be realized in future, robust bone attachment sites (entheses) have to be re-established. The latter comprise four tissue compartments (ligament, non-calcified and calcified fibrocartilage, separated by the tidemark, bone) forming a histological and biomechanical gradient at the attachment interface between the ACL and bone. The ACL enthesis is surrounded by the synovium and exposed to the intra-articular micromilieu. This review will picture and explain the peculiarities of these synovioentheseal complexes at the femoral and tibial attachment sites based on published data. Using this, emerging tissue engineering (TE) strategies addressing them will be discussed. Several material composites (e.g., polycaprolactone and silk fibroin) and manufacturing techniques (e.g., three-dimensional-/bio-printing, electrospinning, braiding and embroidering) have been applied to create zonal cell carriers (bi- or triphasic scaffolds) mimicking the ACL enthesis tissue gradients with appropriate topological parameters for zones. Functionalized or bioactive materials (e.g., collagen, tricalcium phosphate, hydroxyapatite and bioactive glass (BG)) or growth factors (e.g., bone morphogenetic proteins [BMP]-2) have been integrated to achieve the zone-dependent differentiation of precursor cells. However, the ACL entheses comprise individual (loading history) asymmetric and polar histoarchitectures. They result from the unique biomechanical microenvironment of overlapping tensile, compressive and shear forces involved in enthesis formation, maturation and maintenance. This review should provide a road map of key parameters to be considered in future in ACL interface TE approaches.

ACL microtrauma: healing through nutrition, modified sports training, and increased recovery time

PURPOSE

Sports injuries among youth and adolescent athletes are a growing concern, particularly at the knee. Based on our current understanding of microtrauma and anterior cruciate ligament (ACL) healing characteristics, this clinical commentary describes a comprehensive plan to better manage ACL microtrauma and mitigate the likelihood of progression to a non-contact macrotraumatic ACL rupture.

METHODS

Medical literature related to non-contact ACL injuries among youth and adolescent athletes, collagen and ACL extracellular matrix metabolism, ACL microtrauma and sudden failure, and concerns related to current sports training were reviewed and synthesized into a comprehensive intervention plan.

RESULTS

With consideration for biopsychosocial model health factors, proper nutrition and modified sports training with increased recovery time, a comprehensive primary ACL injury prevention plan is described for the purpose of better managing ACL microtrauma, thereby reducing the incidence of non-contact macrotraumatic ACL rupture among youth and adolescent athletes.

CONCLUSION

Preventing non-contact ACL injuries may require greater consideration for reducing accumulated ACL microtrauma. Proper nutrition including glycine-rich collagen peptides, or gelatin-vitamin C supplementation in combination with healthy sleep, and adjusted sports training periodization with increased recovery time may improve ACL extracellular matrix collagen deposition homeostasis, decreasing sudden non-contact ACL rupture incidence likelihood in youth and adolescent athletes. Successful implementation will require compliance from athletes, parents, coaches, the sports medicine healthcare team, and event organizers. Studies are needed to confirm the efficacy of these concepts.

LEVEL OF EVIDENCE

V.

Driving native-like zonal enthesis formation in engineered ligaments using mechanical boundary conditions and β-tricalcium phosphate

Fibrocartilaginous entheses are structurally complex tissues that translate load from elastic ligaments to stiff bone via complex zonal gradients in the organization, mineralization, and cell phenotype. Currently, these complex gradients necessary for long-term mechanical function are not recreated in soft tissue-to-bone healing or engineered replacements, contributing to high failure rates. Previously, we developed a culture system that guides ligament fibroblasts to develop aligned native-sized collagen fibers using high-density collagen gels and mechanical boundary conditions. These constructs are promising ligament replacements, however functional ligament-to-bone attachments, or entheses, are required for long-term function in vivo. The objective of this study was to investigate the effect of compressive mechanical boundary conditions and the addition of beta-tricalcium phosphate (βTCP), a known osteoconductive agent, on the development of zonal ligament-to-bone entheses. We found that compressive boundary clamps, that restrict cellular contraction and produce a zonal tensile-compressive environment, guide ligament fibroblasts to produce 3 unique zones of collagen organization and zonal accumulation of glycosaminoglycans (GAGs), type II, and type X collagen. Ultimately, by 6 weeks of culture these constructs had similar organization and composition as immature bovine entheses. Further, βTCP applied under the clamp enhanced maturation of these entheses, leading to significantly increased tensile moduli, and zonal GAG accumulation, ALP activity, and calcium-phosphate accumulation, suggesting the initiation of endochondral ossification. This culture system produced some of the most organized entheses to date, closely mirroring early postnatal enthesis development, and provides an in vitro platform to better understand the cues that drive enthesis maturation in vivo. STATEMENT OF SIGNIFICANCE: Ligaments are attached to bone via entheses. Entheses are complex tissues with gradients in organization, composition, and cell phenotype. Entheses are necessary for proper transfer of load from ligament-to-bone, but currently are not restored with healing or replacements. Here, we provide new insight into how tensile-compressive boundary conditions and βTCP drive zonal gradients in collagen organization, mineralization, and matrix composition, producing tissues similar to immature ligament-to-bone attachments. Collectively, this culture system uses a bottom-up approach with mechanical and biochemical cues to produce engineered replacements which closely mirror postnatal enthesis development. This culture system is a promising platform to better understanding the cues that regulate enthesis formation so to better drive enthesis regeneration following graft repair and in engineered replacements.

Nutritional Considerations for Injury Prevention and Recovery in Combat Sports

Sports participation is not without risk, and most athletes incur at least one injury throughout their careers. Combat sports are popular all around the world, and about one-third of their injuries result in more than 7 days of absence from competition or training. The most frequently injured body regions are the head and neck, followed by the upper and lower limbs, while the most common tissue types injured are superficial tissues and skin, followed by ligaments and joint capsules. Nutrition has significant implications for injury prevention and enhancement of the recovery process due to its effect on the overall physical and psychological well-being of the athlete and improving tissue healing. In particular, amino acid and protein intake, antioxidants, creatine, and omega-3 are given special attention due to their therapeutic roles in preventing muscle loss and anabolic resistance as well as promoting injury healing. The purpose of this review is to present the roles of various nutritional strategies in reducing the risk of injury and improving the treatment and rehabilitation process in combat sports. In this respect, nutritional considerations for muscle, joint, and bone injuries as well as sports-related concussions are presented. The injury risk associated with rapid weight loss is also discussed. Finally, preoperative nutrition and nutritional considerations for returning to a sport after rehabilitation are addressed.

Biomimetic Approaches for the Design and Fabrication of Bone-to-Soft Tissue Interfaces

Bone-to-soft tissue interfaces are responsible for transferring loads between tissues with significantly dissimilar material properties. The examples of connective soft tissues are ligaments, tendons, and cartilages. Such natural tissue interfaces have unique microstructural properties and characteristics which avoid the abrupt transitions between two tissues and prevent formation of stress concentration at their connections. Here, we review some of the important characteristics of these natural interfaces. The native bone-to-soft tissue interfaces consist of several hierarchical levels which are formed in a highly specialized anisotropic fashion and are composed of different types of heterogeneously distributed cells. The characteristics of a natural interface can rely on two main design principles, namely by changing the local microarchitectural features (e.g., complex cell arrangements, and introducing interlocking mechanisms at the interfaces through various geometrical designs) and changing the local chemical compositions (e.g., a smooth and gradual transition in the level of mineralization). Implementing such design principles appears to be a promising approach that can be used in the design, reconstruction, and regeneration of engineered biomimetic tissue interfaces. Furthermore, prominent fabrication techniques such as additive manufacturing (AM) including 3D printing and electrospinning can be used to ease these implementation processes. Biomimetic interfaces have several biological applications, for example, to create synthetic scaffolds for osteochondral tissue repair.

The impact of collagen protein ingestion on musculoskeletal connective tissue remodeling: a narrative review

Collagen is the central structural component of extracellular connective tissue, which provides elastic qualities to tissues. For skeletal muscle, extracellular connective tissue transmits contractile force to the tendons and bones. Connective tissue proteins are in a constant state of remodeling and have been shown to express a high level of plasticity. Dietary-protein ingestion increases muscle protein synthesis rates. High-quality, rapidly digestible proteins are generally considered the preferred protein source to maximally stimulate myofibrillar (contractile) protein synthesis rates. In contrast, recent evidence demonstrates that protein ingestion does not increase muscle connective tissue protein synthesis. The absence of an increase in muscle connective tissue protein synthesis after protein ingestion may be explained by insufficient provision of glycine and/or proline. Dietary collagen contains large amounts of glycine and proline and, therefore, has been proposed to provide the precursors required to facilitate connective tissue protein synthesis. This literature review provides a comprehensive evaluation of the current knowledge on the proposed benefits of dietary collagen consumption to stimulate connective tissue remodeling to improve health and functional performance.

The effects of collagen peptide supplementation on body composition, collagen synthesis, and recovery from joint injury and exercise: a systematic review

Collagen peptide supplementation (COL), in conjunction with exercise, may be beneficial for the management of degenerative bone and joint disorders. This is likely due to stimulatory effects of COL and exercise on the extracellular matrix of connective tissues, improving structure and load-bearing capabilities. This systematic review aims to evaluate the current literature available on the combined impact of COL and exercise. Following Preferred Reporting Items for Systematic Reviews and Meta-analyses guidelines, a literature search of three electronic databases—PubMed, Web of Science and CINAHL—was conducted in June 2020. Fifteen randomised controlled trials were selected after screening 856 articles. The study populations included 12 studies in recreational athletes, 2 studies in elderly participants and 1 in untrained pre-menopausal women. Study outcomes were categorised into four topics: (i) joint pain and recovery from joint injuries, (ii) body composition, (iii) muscle soreness and recovery from exercise, and (iv) muscle protein synthesis (MPS) and collagen synthesis. The results indicated that COL is most beneficial in improving joint functionality and reducing joint pain. Certain improvements in body composition, strength and muscle recovery were present. Collagen synthesis rates were elevated with 15 g/day COL but did not have a significant impact on MPS when compared to isonitrogenous higher quality protein sources. Exact mechanisms for these adaptations are unclear, with future research using larger sample sizes, elite athletes, female participants and more precise outcome measures such as muscle biopsies and magnetic imagery.

Hydrolyzed Collagen Supplementation on Lower Body Stiffness in Recreational Triathletes

Background: Myotendinous stiffness is related to the collagen content of the muscle and tendon, and can be estimated during running by changes in vertical stiffness (kvert) and the resulting modifications of the spatiotemporal parameters (on-off ground asymmetry and landing-takeoff asymmetry). Supplementation with amino acids found in collagen, such as proline, glycine, and hydroxyl proline, combined with ascorbic acid, improve collagen synthesis and potentially result in improved mechanical strength and stiffness. Objectives: To determine if hydrolyzed collagen (HC) supplementation increases kvert and improves the spatiotemporal parameters during running in recreational triathletes. Methods: Nine active males (weight; 68.4 ± 5.7 kg, height; 171.8 ± 5.4 cm, age; 32.5 ± 4.1 years; Vo2max; 53.15 ± 2.19 mL/kg/min) were randomly distributed into a collagen group (CollG, n = 5) and a control group (CG, n = 4). Participants were supplemented for 4 weeks with 15g HC (CollG) or 15g placebo (CG; maltodextrin), 3 times per week. One hour after supplementation, the participants of both groups were asked to perform four repetitions of short sprints to further stimulate collagen synthesis. The ground reaction forces were recorded during running at 4.44 m s-1, 5.55 m.s-1, and 6.66 m.s-1 for assessment of kvert and the spatiotemporal step parameters. Results: Both groups increased kvert with speed (4.44 - 6.66 m s-1) from 24.8 ± 2.7 to 53.7 ± 16.5 N/m and from 25.1 to 49.8 N/m in the CollG and CG, respectively (P < 0.0001); however, there were no differences between groups before and after the supplementation period. As a consequence, the spatiotemporal parameters of running were also similar between groups. Conclusions: Four weeks of HC supplementation does not improve the bouncing mechanism of running in recreational triathletes.

Improved Biocompatible, Flexible Mesh Composites for Implant Applications via Hydroxyapatite Coating with Potential for 3-Dimensional Extracellular Matrix Network and Bone Regeneration

Hydroxyapatite (HA)-coated metals are biocompatible composites, which have potential for various applications for bone replacement and regeneration in the human body. In this study, we proposed the design of biocompatible, flexible composite implants by using a metal mesh as substrate and HA coating as bone regenerative stimulant derived from a simple sol-gel method. Experiments were performed to understand the effect of coating method (dip-coating and drop casting), substrate material (titanium and stainless steel) and substrate mesh characteristics (mesh size, weave pattern) on implant's performance. HA-coated samples were characterized by X-ray diffractometer, transmission electron microscope, field-emission scanning electron microscope, nanoindenter, polarization and electrochemical impedance spectroscopy, and biocompatibility test. Pure or biphasic nanorod HA coating was obtained on mesh substrates with thicknesses varying from 4.0 to 7.9 μm. Different coating procedures and number of layers did not affect crystal structure, shape, or most intense plane reflections of the HA coating. Moduli of elasticity below 18.5 GPa were reported for HA-coated samples, falling within the range of natural skull bone. Coated samples led to at least 90% cell viability and up to 99.5% extracellular matrix coverage into a 3-dimensional network (16.4% to 76.5% higher than bare substrates). Fluorescent imaging showed no antagonistic effect of the coatings on osteogenic differentiation. Finer mesh size enhanced coating coverage and adhesion, but a low number of HA layers was preferable to maintain open mesh areas promoting extracellular matrix formation. Finally, electrochemical behavior studies revealed that, although corrosion protection for HA-coated samples was generally higher than bare samples, galvanic corrosion occurred on some samples. Overall, the results indicated that while HA-coated titanium grade 1 showed the best performance as a potential implant, HA-coated stainless steel 316 with the finest mesh size constitutes an adequate, lower cost alternative.

Driving Hierarchical Collagen Fiber Formation for Functional Tendon, Ligament, and Meniscus Replacement

Hierarchical collagen fibers are the primary source of strength in musculoskeletal tendons, ligaments, and menisci. It has remained a challenge to develop these large fibers in engineered replacements or in vivo after injury. The objective of this study was to investigate the ability of restrained cell-seeded high density collagen gels to drive hierarchical fiber formation for multiple musculoskeletal tissues. We found boundary conditions applied to high density collagen gels were capable of driving tenocytes, ligament fibroblasts, and meniscal fibrochondrocytes to develop native-sized hierarchical collagen fibers 20-40 μm in diameter. The fibers organize similar to bovine juvenile collagen with native fibril banding patterns and hierarchical fiber bundles 50-350 μm in diameter by 6 weeks. Mirroring fiber organization, tensile properties of restrained samples improved significantly with time, reaching ~1 MPa. Additionally, tendon, ligament, and meniscal cells produced significantly different sized fibers, different degrees of crimp, and different GAG concentrations, which corresponded with respective juvenile tissue. To our knowledge, these are some of the largest, most organized fibers produced to date in vitro. Further, cells produced tissue specific hierarchical fibers, suggesting this system is a promising tool to better understand cellular regulation of fiber formation to better stimulate it in vivo after injury.

Adding exogenous biglycan or decorin improves tendon formation for equine peritenon and tendon proper cells in vitro

Background

Tendon injuries amount to one of the leading causes of career-ending injuries in horses due to the inability for tendon to completely repair and the high reinjury potential. As a result, novel therapeutics are necessary to improve repair with the goal of decreasing leg lameness and potential reinjury. Small leucine-rich repeat proteoglycans (SLRPs), a class of regulatory molecules responsible for collagen organization and maturation, may be one such therapeutic to improve tendon repair. Before SLRP supplementation can occur in vivo, proper evaluation of the effect of these molecules in vitro needs to be assessed. The objective of this study was to evaluate the effectiveness of purified bovine biglycan or decorin on tendon proper and peritenon cell populations in three-dimensional tendon constructs.

Methods

Equine tendon proper or peritenon cell seeded fibrin three-dimensional constructs were supplemented with biglycan or decorin at two concentrations (5 nM or 25 nM). The functionality and ultrastructural morphology of the constructs were assessed using biomechanics, collagen content analysis, transmission electron microscopy (TEM), and gene expression by real time – quantitative polymerase chain reaction (RT-qPCR).

Results

SLRP supplementation affected both tendon proper and peritenon cells-seeded constructs. With additional SLRPs, material and tensile properties of constructs strengthened, though ultrastructural analyses indicated production of similar-sized or smaller fibrils. Overall expression of tendon markers was bolstered more in peritenon cells supplemented with either SLRP, while supplementation of SLRPs to TP cell-derived constructs demonstrated fewer changes in tendon and extracellular matrix markers. Moreover, relative to non-supplemented tendon proper cell-seeded constructs, SLRP supplementation of the peritenon cells showed increases in mechanical strength, material properties, and collagen content.

Conclusions

The SLRP-supplemented peritenon cells produced constructs with greater mechanical and material properties than tendon proper seeded constructs, as well as increased expression of matrix assembly molecules. These findings provide evidence that SLRPs should be further investigated for their potential to improve tendon formation in engineered grafts or post-injury.

Spatial Presentation of Tissue-Specific Extracellular Matrix Components along Electrospun Scaffolds for Tissue Engineering the Bone-Ligament Interface

The bone-ligament interface transitions from a highly organized type I collagen rich matrix to a nonmineralized fibrocartilage region and finally to a mineralized fibrocartilage region that interfaces with the bone. Therefore, engineering the bone-ligament interface requires a biomaterial substrate capable of maintaining or directing the spatially defined differentiation of multiple cell phenotypes. To date the appropriate combination of biophysical and biochemical factors that can be used to engineer such a biomaterial substrate remain unknown. Here we show that microfiber scaffolds functionalized with tissue-specific extracellular matrix (ECM) components can direct the differentiation of MSCs toward the phenotypes seen at the bone-ligament interface. Ligament-ECM (L-ECM) promoted the expression of the ligament-marker gene tenomodulin (TNMD) and higher levels of type I and III collagen expression compared to functionalization with commercially available type I collagen. Functionalization of microfiber scaffolds with cartilage-ECM (C-ECM) promoted chondrogenesis of MSCs, as evidenced by adoption of a round cell morphology and increased SRY-box 9 (SOX9) expression in the absence of exogenous growth factors. Next, we fabricated a multiphasic scaffold by controlling the spatial presentation of L-ECM and C-ECM along the length of a single electrospun microfiber construct, with the distal region of the C-ECM coated fibers additionally functionalized with an apatite layer (using simulated body fluid) to promote endochondral ossification. These ECM functionalized scaffolds promoted spatially defined differentiation of MSCs, with higher expression of TNMD observed in the region functionalized with L-ECM, and higher expression of type X collagen and osteopontin (markers of endochondral ossification) observed at the end of the scaffold functionalized with C-ECM and the apatite coating. Our results demonstrate the utility of tissue-specific ECM derived components as a cue for directing MSC differentiation when engineering complex multiphasic interfaces such as the bone-ligament enthesis.

Investigating materials and orientation parameters for the creation of a 3D musculoskeletal interface co-culture model

Musculoskeletal tissue interfaces are a common site of injury in the young, active populations. In particular, the interface between the musculoskeletal tissues of tendon and bone is often injured and to date, no single treatment has been able to restore the form and function of damaged tissue at the bone–tendon interface. Tissue engineering and regeneration hold great promise for the manufacture of bespoke in vitro models or implants to be used to advance repair and so this study investigated the material, orientation and culture choices for manufacturing a reproducible 3D model of a musculoskeletal interface between tendon and bone cell populations. Such models are essential for future studies focussing on the regeneration of musculoskeletal interfaces in vitro. Cell-encapsulated fibrin hydrogels, arranged in a horizontal orientation though a simple moulding procedure, were shown to best support cellular growth and migration of cells to form an in vitro tendon–bone interface. This study highlights the importance of acknowledging the material and technical challenges in establishing co-cultures and suggests a reproducible methodology to form 3D co-cultures between tendon and bone, or other musculoskeletal cell types, in vitro.

Protein synthesis rates of muscle, tendon, ligament, cartilage, and bone tissue in vivo in humans

Skeletal muscle plasticity is reflected by a dynamic balance between protein synthesis and breakdown, with basal muscle tissue protein synthesis rates ranging between 0.02 and 0.09%/h. Though it is evident that other musculoskeletal tissues should also express some level of plasticity, data on protein synthesis rates of most of these tissues in vivo in humans is limited. Six otherwise healthy patients (62±3 y), scheduled to undergo unilateral total knee arthroplasty, were subjected to primed continuous intravenous infusions with L-[ring-¹³C₆]-Phenylalanine throughout the surgical procedure. Tissue samples obtained during surgery included muscle, tendon, cruciate ligaments, cartilage, bone, menisci, fat, and synovium. Tissue-specific fractional protein synthesis rates (%/h) were assessed by measuring the incorporation of L-[ring-¹³C₆]-Phenylalanine in tissue protein and were compared with muscle tissue protein synthesis rates using a paired t test. Tendon, bone, cartilage, Hoffa’s fat pad, anterior and posterior cruciate ligament, and menisci tissue protein synthesis rates averaged 0.06±0.01, 0.03±0.01, 0.04±0.01, 0.11±0.03, 0.07±0.02, 0.04±0.01, and 0.04±0.01%/h, respectively, and did not significantly differ from skeletal muscle protein synthesis rates (0.04±0.01%/h; P>0.05). Synovium derived protein (0.13±0.03%/h) and intercondylar notch bone tissue protein synthesis rates (0.03±0.01%/h) were respectively higher and lower compared to skeletal muscle protein synthesis rates (P<0.05 and P<0.01, respectively). Basal protein synthesis rates in various musculoskeletal tissues are within the same range of skeletal muscle protein synthesis rates, with fractional muscle, tendon, bone, cartilage, ligament, menisci, fat, and synovium protein synthesis rates ranging between 0.02 and 0.13% per hour in vivo in humans.

Clinical trial registration: NTR5147

Plasma Amino Acid Concentrations After the Ingestion of Dairy and Collagen Proteins, in Healthy Active Males

Introduction: Recent evidence suggests that the consumption of essential amino acids (AA) and/or those abundantly present in collagen may have the capacity to influence the synthesis of new collagen in ligaments and tendons, when tissue perfusion is optimized (e.g., during exercise). However, little is currently known about the bioavailability of these AAs in blood after the consumption of various collagen and diary protein sources: such information is needed to develop potentially useful dietary and supplement intake strategies. Objectives: The aim of the current study was to characterize blood AA concentrations in response to consumption of collagen and dairy protein sources; specifically, maximum concentrations, the timing of maximum concentration, and total (area under the curve) exposure above baseline. Methods: A 20 g serve of various dairy and collagen proteins, and a 300 mL serve of bone broth were consumed by healthy, recreationally active males after an overnight fast. Blood samples were drawn every 20 min for a total of 180 min, for analysis of plasma AA concentrations. Total AA, essential AA and collagen specific AAs were analyzed for maximum concentration, timing of peak, and area under the curve. Results: In general, protein intake was associated with a similar increase in total and collagen specific AAs, except for collagen proteins being a superior source of glycine (683 ± 166 μmol/L) compared to 260 ± 65 μmol/L for dairy proteins (P < 0.0001), whilst dairy proteins were a superior source of leucine (267 ± 77 μmol/L) compared to 189 ± μmol/L for collagen proteins (P < 0.04). Although there were several differences in the bioavailability of hydrolysed compared to non-hydrolysed proteins, this only reached statistical significance within the dairy proteins, but not for collagen proteins. Conclusions: The intake of collagen proteins result in higher plasma peaks of glycine, whilst the intake of dairy proteins result in higher plasma peaks of leucine. This information may support further investigations, and identification of key AAs that may support exercise in the synthesis of collagen.

Rehabilitation and nutrition protocols for optimising return to play from traditional ACL reconstruction in elite rugby union players: A case study

Current nutrition and exercise focus during rehabilitation periods has been on reducing muscle atrophy associated with immobilisation. This case report outlines a best practice anterior cruciate ligament (ACL) rehabilitation programme undertaken by two professional rugby athletes, with the addition of an evidence-based supplementation (gelatine and vitamin C) and exercise protocol focused on collagenous tissue. Both players ruptured their left ACL and were repaired with a traditional hamstring graft. Players undertook a structured rehabilitation programme for 34 weeks before being clinically assessed ready to play. Players saw minimal changes in body composition in the early rehabilitation period (P1 - 0.8 kg; P2 - 0.4 kg). Leg lean mass reduced in both legs of Player 1 (Injured - 0.8 kg, Non-injured - 0.6 kg) at 17 weeks, with Player 2 only experiencing a loss of 0.3 kg of lean tissue in the injured leg. Both players returned to baseline body compositions after 24 weeks. Leg strength returned to a maximum at 24 and 15 weeks, respectively, with knee function returning to baseline by 30 weeks. This case report provides evidence that nutrition and rehabilitation programmes targeted at minimising the effects of disuse in both muscle and connective tissue may assist return to play after ACL injury.

Exercising Bioengineered Skeletal Muscle In Vitro: Biopsy to Bioreactor

The bioengineering of skeletal muscle tissue in-vitro has enabled researchers to more closely mimic the in-vivo skeletal muscle niche. The three-dimensional (3-D) structure of the tissue engineered systems employed to date enable the generation of highly aligned and differentiated myofibers within a representative biological matrix. The use of electrical stimulation to model concentric contraction, via innervation of the myofibers, and the use of mechanical loading to model passive lengthening or stretch has begun to provide a manipulable environment to investigate the cellular and molecular responses following exercise mimicking stimuli in-vitro. Currently available bioreactor systems allow either electrical stimulation or mechanical loading to be utilized at any given time. In the present manuscript, we describe in detail the methodological procedures to create 3-D bioengineered skeletal muscle using both cell lines and/or primary human muscle derived cells from a tissue biopsy, through to modeling exercising stimuli using a bioreactor that can provide both electrical stimulation and mechanical loading simultaneously within the same in-vitro system.

A Novel Microplate 3D Bioprinting Platform for the Engineering of Muscle and Tendon Tissues

Two-dimensional (2D) cell cultures do not reflect the in vivo situation, and thus it is important to develop predictive three-dimensional (3D) in vitro models with enhanced reliability and robustness for drug screening applications. Treatments against muscle-related diseases are becoming more prominent due to the growth of the aging population worldwide. In this study, we describe a novel drug screening platform with automated production of 3D musculoskeletal-tendon-like tissues. With 3D bioprinting, alternating layers of photo-polymerized gelatin-methacryloyl-based bioink and cell suspension tissue models were produced in a dumbbell shape onto novel postholder cell culture inserts in 24-well plates. Monocultures of human primary skeletal muscle cells and rat tenocytes were printed around and between the posts. The cells showed high viability in culture and good tissue differentiation, based on marker gene and protein expressions. Different printing patterns of bioink and cells were explored and calcium signaling with Fluo4-loaded cells while electrically stimulated was shown. Finally, controlled co-printing of tenocytes and myoblasts around and between the posts, respectively, was demonstrated followed by co-culture and co-differentiation. This screening platform combining 3D bioprinting with a novel microplate represents a promising tool to address musculoskeletal diseases.

Selected In-Season Nutritional Strategies to Enhance Recovery for Team Sport Athletes: A Practical Overview

Team sport athletes face a variety of nutritional challenges related to recovery during the competitive season. The purpose of this article is to review nutrition strategies related to muscle regeneration, glycogen restoration, fatigue, physical and immune health, and preparation for subsequent training bouts and competitions. Given the limited opportunities to recover between training bouts and games throughout the competitive season, athletes must be deliberate in their recovery strategy. Foundational components of recovery related to protein, carbohydrates, and fluid have been extensively reviewed and accepted. Micronutrients and supplements that may be efficacious for promoting recovery include vitamin D, omega-3 polyunsaturated fatty acids, creatine, collagen/vitamin C, and antioxidants. Curcumin and bromelain may also provide a recovery benefit during the competitive season but future research is warranted prior to incorporating supplemental dosages into the athlete's diet. Air travel poses nutritional challenges related to nutrient timing and quality. Incorporating strategies to consume efficacious micronutrients and ingredients is necessary to support athlete recovery in season.

The impact of loading, unloading, ageing and injury on the human tendon

A tendon transfers force from the contracting muscle to the skeletal system to produce movement and is therefore a crucial component of the entire muscle-tendon complex and its function. However, tendon research has for some time focused on mechanical properties without any major appreciation of potential cellular and molecular changes. At the same time, methodological developments have permitted determination of the mechanical properties of human tendons in vivo, which was previously not possible. Here we review the current understanding of how tendons respond to loading, unloading, ageing and injury from cellular, molecular and mechanical points of view. A mechanistic understanding of tendon tissue adaptation will be vital for development of adequate guidelines in physical training and rehabilitation, as well as for optimal injury treatment.

Minimizing Injury and Maximizing Return to Play: Lessons from Engineered Ligaments

Musculoskeletal injuries account for more than 70% of time away from sports. One of the reasons for the high number of injuries and long return to play is that we have only a very basic understanding of how our training alters tendon and ligament (sinew) structure and function. Sinews are highly dense tissues that are difficult to characterize both in vivo and in vitro. Recently, engineered ligaments have been developed in vitro using cells from human anterior cruciate ligaments or hamstring tendons. These three-dimensional tissues can be grown in a laboratory, treated with agents thought to affect sinew physiology, and then mechanically tested to determine their function. Using these tissues, we have learned that sinews, like bone, quickly become refractory to an exercise stimulus, suggesting that short (<10 min) periods of activity with relatively long (6 h) periods of rest are best to train these tissues. The engineered sinews have also shown how estrogen decreases sinew function and that a factor released following intense exercise increases sinew collagen synthesis and function. Last, engineered sinews are being used to screen possible nutritional interventions that may benefit tendon or ligament function. Using the data derived from these tissue-engineered sinews, new nutritional and training regimes are being designed and tested with the goal of minimizing injury and accelerating return to play.

Integrating soft and hard tissues via interface tissue engineering

The enthesis, or interface between bone and soft tissues such as ligament and tendon, is prone to injury and often does not heal, even post surgical intervention. Interface tissue engineering represents an integrative strategy for regenerating the native enthesis by functionally connecting soft and hard tissues and thereby improving clinical outcome. This review focuses on integrative and cell-instructive scaffold designs that target the healing of the two most commonly injured soft tissue-bone junctions: tendon-bone interface (e.g., rotator cuff) and ligament-bone interface (e.g., anterior cruciate ligament). The inherent connectivity between soft and hard tissues is instrumental for musculoskeletal motion and is therefore a key design criterion for soft tissue regeneration. To this end, scaffold design for soft tissue regeneration have progressed from single tissue systems to the emerging focus on pre-integrated and functional composite tissue units. Specifically, a multifaceted, bioinspired approach has been pursued wherein scaffolds are tailored to stimulate relevant cell responses using spatially patterned structural and chemical cues, growth factors, and/or mechanical stimulation. Moreover, current efforts to elucidate the essential scaffold design criteria via strategic biomimicry are emphasized as these will reduce complexity in composite tissue regeneration and ease the related burden for clinical translation. These innovative studies underscore the clinical relevance of engineering connective tissue integration and have broader impact in the formation of complex tissues and total joint regeneration. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:1069-1077, 2018.

Donor age affects proteome composition of tenocyte-derived engineered tendon

Background

The concept of tissue engineering is to deliver to the injury site biological scaffolds carrying functional cells that will enhance healing response. The preferred cell source is autologous in order to reduce immune response in the treated individual. However, in elderly patients age-related changes in synthetic activity of the implanted cells and subsequent alterations in tissue protein content may affect therapeutic outcomes. In this study we investigated the effect of donor age on proteome composition of tenocyte-derived tendon tissue-engineered constructs.

Results

Liquid chromatography tandem mass spectrometry was used to assess the proteome of tissue-engineered constructs derived from young and old equine tenocytes. Ageing was associated with altered extracellular matrix composition, especially accumulation of collagens (type I, III and XIV), and lower cytoskeletal turnover. Proteins involved in cell responsiveness to mechanical stimuli and cell-extracellular matrix interaction (calponin 1, palladin, caldesmon 1, cortactin) were affected.

Conclusions

This study demonstrated significant changes in proteome of engineered tendon derived from young and old tenocytes, indicating the impact of donor age on composition of autologous constructs.

Electronic supplementary material

The online version of this article (10.1186/s12896-018-0414-5) contains supplementary material, which is available to authorized users.

Treatment of Ligament Constructs with Exercise-conditioned Serum: A Translational Tissue Engineering Model

In vitro experiments are essential to understand biological mechanisms; however, the gap between monolayer tissue culture and human physiology is large, and translation of findings is often poor. Thus, there is ample opportunity for alternative experimental approaches. Here we present an approach in which human cells are isolated from human anterior cruciate ligament tissue remnants, expanded in culture, and used to form engineered ligaments. Exercise alters the biochemical milieu in the blood such that the function of many tissues, organs and bodily processes are improved. In this experiment, ligament construct culture media was supplemented with experimental human serum that has been 'conditioned' by exercise. Thus the intervention is more biologically relevant since an experimental tissue is exposed to the full endogenous biochemical milieu, including binding proteins and adjunct compounds that may be altered in tandem with the activity of an unknown agent of interest. After treatment, engineered ligaments can be analyzed for mechanical function, collagen content, morphology, and cellular biochemistry. Overall, there are four major advantages versus traditional monolayer culture and animal models, of the physiological model of ligament tissue that is presented here. First, ligament constructs are three-dimensional, allowing for mechanical properties (i.e., function) such as ultimate tensile stress, maximal tensile load, and modulus, to be quantified. Second, the enthesis, the interface between boney and sinew elements, can be examined in detail and within functional context. Third, preparing media with post-exercise serum allows for the effects of the exercise-induced biochemical milieu, which is responsible for the wide range of health benefits of exercise, to be investigated in an unbiased manner. Finally, this experimental model advances scientific research in a humane and ethical manner by replacing the use of animals, a core mandate of the National Institutes of Health, the Center for Disease Control, and the Food and Drug Administration.

Proteomic differences between native and tissue-engineered tendon and ligament

Tendons and ligaments (T/Ls) play key roles in the musculoskeletal system, but they are susceptible to traumatic or age‐related rupture, leading to severe morbidity as well as increased susceptibility to degenerative joint diseases such as osteoarthritis. Tissue engineering represents an attractive therapeutic approach to treating T/L injury but it is hampered by our poor understanding of the defining characteristics of the two tissues. The present study aimed to determine differences in the proteomic profile between native T/Ls and tissue engineered (TE) T/L constructs. The canine long digital extensor tendon and anterior cruciate ligament were analyzed along with 3D TE fibrin‐based constructs created from their cells. Native tendon and ligament differed in their content of key structural proteins, with the ligament being more abundant in fibrocartilaginous proteins. 3D T/L TE constructs contained less extracellular matrix (ECM) proteins and had a greater proportion of cellular‐associated proteins than native tissue, corresponding to their low collagen and high DNA content. Constructs were able to recapitulate native T/L tissue characteristics particularly with regard to ECM proteins. However, 3D T/L TE constructs had similar ECM and cellular protein compositions indicating that cell source may not be an important factor for T/L tissue engineering.

Vitamin C-enriched gelatin supplementation before intermittent activity augments collagen synthesis

BACKGROUND

Musculoskeletal injuries are the most common complaint in active populations. More than 50% of all injuries in sports can be classified as sprains, strains, ruptures, or breaks of musculoskeletal tissues. Nutritional and/or exercise interventions that increase collagen synthesis and strengthen these tissues could have an important effect on injury rates.

OBJECTIVE

This study was designed to determine whether gelatin supplementation could increase collagen synthesis.

DESIGN

Eight healthy male subjects completed a randomized, double-blinded, crossover-design study in which they consumed either 5 or 15 g of vitamin C-enriched gelatin or a placebo control. After the initial drink, blood was taken every 30 min to determine amino acid content in the blood. A larger blood sample was taken before and 1 h after consumption of gelatin for treatment of engineered ligaments. One hour after the initial supplement, the subjects completed 6 min of rope-skipping to stimulate collagen synthesis. This pattern of supplementation was repeated 3 times/d with ≥6 h between exercise bouts for 3 d. Blood was drawn before and 4, 24, 48, and 72 h after the first exercise bout for determination of amino-terminal propeptide of collagen I content.

RESULTS

Supplementation with increasing amounts of gelatin increased circulating glycine, proline, hydroxyproline, and hydroxylysine, peaking 1 h after the supplement was given. Engineered ligaments treated for 6 d with serum from samples collected before or 1 h after subjects consumed a placebo or 5 or 15 g gelatin showed increased collagen content and improved mechanics. Subjects who took 15 g gelatin 1 h before exercise showed double the amino-terminal propeptide of collagen I in their blood, indicating increased collagen synthesis.

CONCLUSION

These data suggest that adding gelatin to an intermittent exercise program improves collagen synthesis and could play a beneficial role in injury prevention and tissue repair. This trial was registered at the Australian New Zealand Clinical Trials Registry as ACTRN12616001092482.

Anterior Cruciate Ligament: Structure, Injuries and Regenerative Treatments

Anterior cruciate ligament (ACL) is one of the most vulnerable ligaments of the knee. ACL impairment results in episodic instability, chondral and meniscal injury and early osteoarthritis. The poor self-healing capacity of ACL makes surgical treatment inevitable. Current ACL reconstructions include a substitution of torn ACL via biological grafts such as autograft, allograft. This review provides an insight of ACL structure, orientation and properties followed by comparing the performance of various constructs that have been used for ACL replacement. New approaches, undertaken to induce ACL regeneration and fabricate biomimetic scaffolds, are also discussed.

Revision Meniscal Surgery in Children and Adolescents: Risk Factors and Mechanisms for Failure and Subsequent Management

BACKGROUND

The mechanisms of failure and risk factors for failed meniscal surgery in children and adolescents have not been well described.

PURPOSE

To investigate the risk factors, mechanisms of failure, and subsequent operative management for revision meniscal surgery in a pediatric population, as well as to identify the local incidence of failed meniscal surgery.

STUDY DESIGN

Case-control study; Level of evidence, 3.

METHODS

All patients younger than 20 years who had arthroscopic management for meniscal injuries at a single institution between 2008 and 2012 underwent retrospective review. Demographic data and intraoperative findings at the time of the initial surgery were documented. All patients undergoing a second procedure on the same meniscus were further analyzed. Multivariate logistic regression with purposeful selection was performed to identify independent risk factors for revision meniscal surgery.

RESULTS

Arthroscopic knee surgery was performed on 293 patients and 324 menisci, including 129 primary repairs, 149 primary partial meniscectomies, and 46 discoid saucerizations ± stabilization. At a mean of 40 months (range, 19-62 months) after surgery, 13% of all menisci required a revision procedure. The primary repair cohort had the highest failure rate (18%), followed by the primary discoid saucerization cohort (15%) and the partial meniscectomy cohort (7%). Multivariate analysis indicated that meniscal repair was predictive of retear (odds ratio, 2.04 [95% CI, 1.01-4.1]; P = .046), and children with an open physis and a bucket-handle tear had the highest retear rate of 46% (P = .039). Independent variables shown to have no significant relationship to revision meniscal surgery included age, sex, body mass index, extremity side, laterality (medial-lateral), time to repair, tear location, and associated ligament reconstruction. The most common indication for revision surgery was an acute reinjury during intense physical activity. Revision procedures were performed at a mean of 14 months after the index procedure, and the majority of failures (83%) were identified within 1 year. Of patients undergoing a revision surgery, 44% underwent a further debridement, whereas 56% underwent a repair.

CONCLUSION

The success rate of meniscal surgery is 87% in children and adolescents. The revision rate was higher when repair was attempted in the index procedure, particularly in those children with open physes and bucket-handle tears. Most failures are the result of an acute reinjury within 1 year, and nearly half will require debridement of the retorn meniscus.

Current evidence and future directions for research into the use of tantalum in soft tissue re-attachment surgery

The use of tantalum is well established in orthopaedic surgery.

Development of tissue engineered ligaments with titanium spring reinforcement

Titanium spring reinforced tissue-engineered ligament replacement: enhancing construct stiffness, load propagation and robustness under cyclic loading.

Exploiting cell-mediated contraction and adhesion to structure tissues in vitro

Progress in tissue engineering is now impacting beyond the field of regenerative medicine. Engineered tissues are now used as tools to evaluate the toxicity of compounds or even to enable the modelling of disease. While many of the materials that are used to facilitate tissue growth are designed to enable cell attachment, many researchers consider that the contraction and modification of these matrices by attached cells is not desirable and take measures to prevent this from occurring. Where substantial alignment of the molecules within tissues, however, is a feature of structure the process of contraction can be exploited to guide new matrix deposition. In this paper, we will demonstrate how we have used the cell contraction process to generate tissues with high levels of organization. The tissues that have been grown in the laboratory have been characterized using a suite of analytical techniques to demonstrate significant levels of matrix organization and mechanical behaviour analogous to natural tissues. This paper provides an overview of research that has been undertaken to determine how tissues have been grown in vitro with structuring from the molecular, right through to the macroscopic level.

The exercise-induced biochemical milieu enhances collagen content and tensile strength of engineered ligaments

Exercise stimulates a dramatic change in the concentration of circulating hormones, such as growth hormone (GH), but the biological functions of this response are unclear. Pharmacological GH administration stimulates collagen synthesis; however, whether the post-exercise systemic milieu has a similar action is unknown. We aimed to determine whether the collagen content and tensile strength of tissue-engineered ligaments is enhanced by serum obtained post-exercise. Primary cells from a human anterior cruciate ligament (ACL) were used to engineer ligament constructs in vitro. Blood obtained from 12 healthy young men 15 min after resistance exercise contained GH concentrations that were ∼7-fold greater than resting serum (P < 0.001), whereas IGF-1 was not elevated at this time point (P = 0.21 vs. rest). Ligament constructs were treated for 7 days with medium supplemented with serum obtained at rest (RestTx) or 15 min post-exercise (ExTx), before tensile testing and collagen content analysis. Compared with RestTx, ExTx enhanced collagen content (+19%; 181 ± 33 vs. 215 ± 40 μg per construct P = 0.001) and ligament mechanical properties - maximal tensile load (+17%, P = 0.03 vs. RestTx) and ultimate tensile strength (+10%, P = 0.15 vs. RestTx). In a separate set of engineered ligaments, recombinant IGF-1, but not GH, enhanced collagen content and mechanics. Bioassays in 2D culture revealed that acute treatment with post-exercise serum activated mTORC1 and ERK1/2. In conclusion, the post-exercise biochemical milieu, but not recombinant GH, enhances collagen content and tensile strength of engineered ligaments, in association with mTORC1 and ERK1/2 activation.

Biodegradable Materials for Bone Repair and Tissue Engineering Applications

This review discusses and summarizes the recent developments and advances in the use of biodegradable materials for bone repair purposes. The choice between using degradable and non-degradable devices for orthopedic and maxillofacial applications must be carefully weighed. Traditional biodegradable devices for osteosynthesis have been successful in low or mild load bearing applications. However, continuing research and recent developments in the field of material science has resulted in development of biomaterials with improved strength and mechanical properties. For this purpose, biodegradable materials, including polymers, ceramics and magnesium alloys have attracted much attention for osteologic repair and applications. The next generation of biodegradable materials would benefit from recent knowledge gained regarding cell material interactions, with better control of interfacing between the material and the surrounding bone tissue. The next generations of biodegradable materials for bone repair and regeneration applications require better control of interfacing between the material and the surrounding bone tissue. Also, the mechanical properties and degradation/resorption profiles of these materials require further improvement to broaden their use and achieve better clinical results.