Suspension feeders: diversity, principles of particle separation and biomimetic potential

Flamingos use their L-shaped beak and morphing feet to induce vortical traps for prey capture

Flamingos feature one of the most sophisticated filter-feeding systems among birds, characterized by upside-down feeding, comb-like lamellae, and a piston-like tongue. However, the hydrodynamic functions of their L-shaped chattering beak, S-curved neck, and distinct behaviors such as stomping and feeding against the flow remain a mystery. Combining live flamingo experiments with live brine shrimp and passive particles, bioinspired physical models, and 3D CFD simulations, we show that flamingos generate self-induced vortical traps using their heads, beaks, and feet to capture agile planktonic prey in harsh fluid environments. When retracting their heads rapidly (~40 cm/s), flamingos generate tornado-like vortices that stir up and upwell bottom sediments and live shrimp aided by their L-shaped beak. Remarkably, they also induce directional flows (~7 cm/s) through asymmetric beak chattering underwater (~12 Hz). Their morphing feet create horizontal eddies during stomping, lifting, and concentrating sediments and brine shrimp, while trapping fast-swimming invertebrates, as confirmed by using a 3D-printed morphing foot model. During interfacial skimming, flamingos produce a vortical recirculation zone at the beak's tip, aiding in prey capture. Experiments using a flamingo-inspired particle collection system indicate that beak chattering improves capture rates by ~7×. These findings offer design principles for bioinspired particle collection systems that may be applied to remove pollutants and harmful microorganisms from water bodies.

Evaluation of microplastics in marine selective and non-selective suspension-feeding benthic invertebrates

Microplastic (MP) pollution is ubiquitous in marine ecosystems, presenting significant concerns to organisms and fisheries. Suspension-feeding invertebrates are particularly susceptible to encountering and consuming these particles due to their feeding strategy. This meta-analysis assessed MP contamination in selective suspension-feeding (SSF) and non-selective suspension-feeding (NSSF) benthic marine invertebrate species globally. Data reported from 144 peer-reviewed articles, covering as wide of a geographic scope as possible, were extracted and analyzed. In total, 518 independent batches of organisms (i.e. rows in the spreadsheet) were compiled, representing seven Phyla, 12 Classes, 53 Families, and 131 species. In both SSFs and NSSFs, microfibers and fragments were the most common MP shapes found, with polyethylene, polyethylene terephthalate, and polypropylene being the predominant polymer types. While the mean detection frequencies of MPs within individuals of each independent sample batch were similar between SSFs (63 % ± 18 95 %CI) and NSSFs (73 % ± 5 95 %CI), NSSFs had significantly greater MP concentrations than SSFs (i.e. 9.13 MPs ind-1 ±8.87 95 %CI; 138.52.74 MP g ww-1 ±114.6 95 %CI vs. 6.33 MPs ind-1 ±1.53 95 %CI; 3.45 MP g ww-1 ±1.19 95 %CI, respectively). Significant differences in the relative abundance of MPs were also found based on taxonomy. Collectively, these results highlight important differences in MP concentrations in suspension-feeding benthic invertebrates globally and may help inform future efforts in determining appropriate sentinel species for future MP surveys.

Making sense of vertebrate senses from a neural crest and cranial placode evo-devo perspective

The evolution of vertebrates from protochordate ancestors marked the beginning of the gradual transition to predatory lifestyles. Enabled by the acquisition of multipotent neural crest and cranial placode cell populations, vertebrates developed an elaborate peripheral nervous system, equipped with paired sense organs, which aided in adaptive behaviors and ultimately, successful colonization of diverse environmental niches. Underpinning the enduring success of vertebrates is the highly adaptable nature of the peripheral nervous system, which is enabled by the exceptional malleability of the neural crest and placode developmental programs. Here, we explore the embryonic origins of the vertebrate senses from the neural crest and cranial placodes and discuss the evolutionary trajectory of the senses in the context of adaptation to novel environments.

A filter inspired by deep-sea glass sponges for oil cleanup under turbulent flow

Oil spill disasters lead to widespread and long-lasting social, economical, environmental and ecological impacts. Technical challenges remain for conventional static adsorption due to hydrodynamic instability under complex water-flow conditions, which results in low oil-capture efficiency, time delay and oil escape. To address this issue, we design a vortex-anchored filter inspired by the anatomy of deep-sea glass sponges (E. aspergillum) by mimicking their exceptional skeletal features and filter-feeding patterns. Results demonstrate that the vortex-anchored filter can retain external turbulent-flow kinetic energy in low-speed vortical flow with small Kolmogorov microscale (85 μm) in the cavity of skeleton, leading to enhanced interfacial mass transfer and residence time by physical field synergy. It improves hydrodynamic stability by reducing Reynolds stresses in nearly quiescent wake flow. The vortex-anchored filter can realize >97% capture of floating, underwater and emulsified oils stably at Reynolds numbers ranging from subcritical to supercritical regimes. This study not only highlights the importance of vortex-anchored mechanism in enhancing interfacial mass transfer and hydrodynamic stability during oil capture beyond previously known benefits of increased residence time, but also represents a paradigm shift to advance biophysically inspired strategies for in-situ, dynamic and robust cleanup of spilled oil, environmental remediation and resource recovery.

Filter feeding in devil rays is highly sensitive to morphology

Mobulid rays (manta and devil rays) use a highly specialized filtering apparatus to separate plankton food particles from seawater. Recent studies have indicated that captive vortices form within the microscale pores of the filter, which enhance filtration efficiency through a novel mechanism referred to as ricochet separation. The high throughput and clog resistance of this filtration process have led to the development of several bioinspired engineered filtration systems. However, it is still unclear how changes to the filter morphology influence the surrounding flow patterns and filtration efficiency. We address this question by examining the flow fields around and filtering properties of mobulid filters with systematically varied morphologies, using a combination of computational fluid dynamics and experiments on physical models. While the pore size is the principal determinant of filtration efficiency in a sieve filter, we found that the captive vortices in a mobulid filter grow or shrink to fill the pore, and changes in the pore size have modest effects. By contrast, the filtration efficiency appears to be highly sensitive to the orientation of the filter lobes (microscale plate-like structures). These results provide a foundation for interpreting the morphological differences between species and also for generating optimized bioinspired designs.

Interplay of elasticity and flow velocity on gorgonian feeding and implications for bioinspired design

Evidence shows that gorgonians are more resistant to ocean acidification and rising temperatures than hard corals and are vital to reef health and the reestablishment of disrupted coral reef communities. Gorgonian coral's resilience and its diversity of morphology and environment make it well-suited as a model organism for bioinspired design applied to particle capture. We focus on flow near the polyps, using an updated form of the immersed boundary method to model the fluid-structure interaction of the flexible polyps and the surrounding ocean water. The inlet velocity and the polyp elasticity are simultaneously varied to gain insight into (1) how these parameters affect the emergent reconfiguration of their tentacles and (2) how the interaction of the reconfiguration and inlet velocity impacts passive particle capture. Two main behaviors are observed: a recirculation regime, in which particles recirculate in a region near the oral disk, and a unidirectional regime, in which the particles move unidirectionally through the tentacles without recirculation. Our results show that different regimes support different feeding strategies. We apply these results as bioinspired filtration, discussing how an elastic material could benefit specific engineering applications.

Permeability-selectivity trade-off for a universal leaky channel inspired by mobula filters

Mobula rays have evolved leaf-shaped filter structures to separate food particles from seawater, which function similarly to industrial cross-flow filters. Unlike cross-flow filtration, where permeability and selectivity are rationally designed following trade-off analyses, the driving forces underlying the evolution of mobula filter geometry have remained elusive. To bridge the principles of cross-flow and mobula filtration, we establish a universal framework for the permeability-selectivity trade-off in a leaky channel inspired by mobula filters, where permeability and selectivity are characterized by the pore-scale leaking rate and the cut-off particle size, respectively. Beyond the classic pore-flow regime in cross-flow filtration, we reveal transition and vortex regimes pertinent to mobula filtration. Combining theory, physical experiments, and simulations, we present distinct features of water permeability and particle selectivity across the three regimes. In particular, we identify an unreported 1/2-scaling law for the leaking rate in the vortex regime. We conclude by demonstrating that mobula filters strike an elegant balance between permeability and selectivity, which enables mobula rays to simultaneously satisfy biological requirements for breathing and filter feeding. By integrating cross-flow and mobula filtration into a universal framework, our findings provide fundamental insights into the physical constraints and evolutionary pressures associated with biological filtration geometries and lay the foundation for developing mobula-inspired filtration in industry.

Thin-layer capping with granular activated carbon and calcium-silicate to remediate organic and metal polluted harbor sediment - A mesocosm study

Sediments polluted with hydrophobic organic contaminants (HOCs) and metals can pose environmental risks, yet effective remediation remains a challenge. We investigated a new composite sorbent comprising granular activated carbon (GAC) and a calcium-silicate (Polonite®, PO) for thin-layer capping of polluted sediment, with the aim to sequester both HOCs and metals. Box cores were collected in polluted Oskarshamn harbor, Sweden, and the sediments were treated with GAC and/or Polonite in a 10-week mesocosm study to measure endpoints ranging from contaminant immobilization to ecological side effects on native fauna and biogeochemical processes. The GAC particle size was 300-500 μm to reduce negative effects on benthic fauna (by being non-ingestible) and of biogenic origin (coconut) to have a small carbon footprint compared with traditional fossil ACs. The calcium-silicate was a fine-grained industrial by-product used to target metals and as a carrier for GAC to improve the cap integrity. GAC decreased the uptake of dioxins (PCDD/Fs) in the bivalve Macoma balthica by 47 % and the in vitro bioavailability of PCB by 40 %. The composite cap of GAC + Polonite decreased sediment-to-water release of Pb < Cu < Ni < Zn < Cd by 42-98 % (lowest to highest decrease) and bioaccumulation of Cd < Zn < Cu in the worm Hediste diversicolor by 50-65 %. Additionally, in vitro bioavailability of Pb < Cu < Zn, measured using digestive fluid extraction, decreased by 43-83 %. GAC showed no adverse effects on benthic fauna while Polonite caused short-term adverse effects on fauna diversity and abundance, partly due to its cohesiveness, which, in turn, can improve the cap integrity in situ. Fauna later recovered and bioturbated the cap. Both sorbents influenced biogeochemical processes; GAC sorbed ammonium, Polonite decreased respiration, and both sorbents reduced denitrification. In conclusion, the side effects were relatively mild, and the cap decreased the release and bioavailability of both HOCs and metals effectively, thus offering a promising sustainable and cost-effective solution to remediating polluted sediments.

Assessment of the calcium-silicate Polonite as a sorbent for thin-layer capping of metal contaminated sediment

Sediments contaminated with hazardous metals pose risks to humans and wildlife, yet viable management options are scarce. In a series of laboratory experiments, we characterized Polonite® - an activated calcium-silicate - as a novel sorbent for thin-layer capping of metal-contaminated sediments. We tested a fine-grained by-product from the Polonite production as a cheap and sustainable sorbent. First, Polonite was reacted with solutions of Cu, Pb, and Zn, and the surface chemistry of the Polonite was examined using, e.g., scanning electron microscopy to investigate metal sorption mechanisms. Batch experiments were conducted by adding Polonite to industrially contaminated harbor sediment to determine sorption kinetics and isotherms. Importantly, we measured if the Polonite could reduce metal bioavailability to sediment fauna by performing digestive fluid extraction (DFE). Finally, a cap placement technique was studied by applying a Polonite slurry in sedimentation columns. The results showed rapid metal sorption to Polonite via several mechanisms, including hydroxide and carbonate precipitation, and complexation with metal oxides on the Polonite surface. Isotherm data revealed that the sediment uptake capacity (Kf) for Cu, Pb, and Zn increased by a factor of 25, 21, and 14, respectively, after addition of 5% Polonite. The bioavailability of Cu, Pb, and Zn was reduced by 70%, 65%, and 54%, respectively, after a 25% Polonite addition. In conclusion, we propose that sediment treatment with low doses of the Polonite by-product can be a cheap, sustainable, and effective remediation method compared to other more intrusive methods such as dredging or conventional isolation capping.

Microplastics in marine ecosystems: A comprehensive review of biological and ecological implications and its mitigation approach using nanotechnology for the sustainable environment

Microplastic contamination has rapidly become a serious environmental issue, threatening marine ecosystems and human health. This review aims to not only understand the distribution, impacts, and transfer mechanisms of microplastic contamination but also to explore potential solutions for mitigating its widespread impact. This review encompasses the categorisation, origins, and worldwide prevalence of microplastics and methodically navigates the complicated structure of microplastics. Understanding the sources of minute plastic particles infiltrating water bodies worldwide is critical for successful removal. The presence and accumulation of microplastics has far reaching negative impacts on various marine creatures, eventually extending its implications to human health. Microplastics are known to affect the metabolic activities and the survival of microbial communities, phytoplankton, zooplankton, and fauna present in marine environments. Moreover, these microplastics cause developmental abnormalities, endocrine disruption, and several metabolic disorders in humans. These microplastics accumulates in aquatic environments through trophic transfer mechanisms and biomagnification, thereby disrupting the delicate balance of these ecosystems. The review also addresses the tactics for minimising the widespread impact of microplastics by suggesting practical alternatives. These include increasing public awareness, fostering international cooperation, developing novel cleanup solutions, and encouraging the use of environment-friendly materials. In conclusion, this review examines the sources and prevalence of microplastic contamination in marine environment, its impacts on living organisms and ecosystems. It also proposes various sustainable strategies to mitigate the problem of microplastics pollution. Also, the current challenges associated with the mitigation of these pollutants have been discussed and addressing these challenges require immediate and collective action for restoring the balance in marine ecosystems.

The Cambrian Odaraia alata and the colonization of nektonic suspension-feeding niches by early mandibulates

The diversity of cephalic morphologies in mandibulates (myriapods and pancrustaceans) was key to their evolutionary success. A group of Cambrian bivalved arthropods called hymenocarines exhibit diagnostic mandibulate traits that illustrate this diversity, but many forms are still poorly known. These include the odaraiids, typified by Odaraia alata from the Burgess Shale (Wuliuan), characterized by its unique tubular carapace and rudder-like tail fan, and one of the largest Cambrian euarthropods at nearly 20 cm in length. Unfortunately, odaraiid cephalic anatomy has been largely unknown, limiting evolutionary scenarios and putting their mandibulate affinities into question. Here, we reinvestigate Odaraia based on new specimens from the Burgess Shale and describe exquisitely preserved mandibles with teeth and adjacent structures: a hypostome, maxillae and potential paragnaths. These structures can be homologized with those of Cambrian fuxianhuiids and extant mandibulates, and suggest that the ancestral mandibulate head could have had a limbless segment but retained its plasticity, allowing for limb re-expression within Pancrustacea. Furthermore, we show the presence of limbs with spinose endites which created a suspension-feeding structure. This discovery provides morphological evidence for suspension feeding among large Cambrian euarthropods and evinces the increasing exploitation of planktonic resources in Cambrian pelagic food webs.

Do DOM quality and origin affect the uptake and accumulation of a lipid-soluble contaminant in a filter feeding ascidian species (Ciona) that can target small particle size classes?

The widely reported increase of terrestrial dissolved organic matter (terrDOM) in northern latitude coastal areas ("coastal darkening") can impact contaminant dynamics in affected systems. One potential impact is based on differences in chemical adsorption processes of the molecularly larger terrDOM compared to marine DOM (marDOM) that leads to increased emulsification of lipophilic contaminants with terrDOM. Filter feeders filter large amounts of water and DOM daily and thus are directly exposed to associated contaminants through both respiration and feeding activity. Thus, increased exposure to terrDOM could potentially lead to an increase in bioaccumulation of lipid soluble contaminants in filter feeders. To assess the effect of DOM on bioaccumulation in filter feeders, we exposed the mucous based filter feeding ascidian Ciona intestinalis (formerly known as Ciona intestinalis Type B), to the lipophilic veterinary drug teflubenzuron (log KOW: 5.39) in combination with four DOM treatments: TerrDOM, marDOM, a mix of the two called mixDOM, and seawater without DOM addition. The exposure lasted for 15 days, after which the individuals in all DOM treatments showed a trend towards higher bioaccumulation of Teflubenzuron than those in the seawater control. However, there was considerable overlap in posterior distributions. Against our expectations, marDOM resulted in the highest bioaccumulation factor (BAF), followed by mixDOM, with terrDOM resulting in the lowest BAF except for seawater (kinetic BAF L/kg median, 2.5 %-97.5 % percentile marDOM 94, 74-118; mixDOM 82, 63-104; terrDOM 79; 61-99; seawater 61, 44-79). All BAFs were below the level of concern according to the EU REACH regulation (BAF < 2000 L / kg) and, therefore, likely not environmentally problematic in the examined context. However, the results show that DOM can act as a dietary vector; thus, different combinations of contaminants, DOM, and filter feeding organisms should be tested further.

The three-dimensionally articulated oral apparatus of a Devonian heterostracan sheds light on feeding in Palaeozoic jawless fishes

Attempts to explain the origin and diversification of vertebrates have commonly invoked the evolution of feeding ecology, contrasting the passive suspension feeding of invertebrate chordates and larval lampreys with active predation in living jawed vertebrates. Of the extinct jawless vertebrates that phylogenetically intercalate these living groups, the feeding apparatus is well-preserved only in the early diverging stem-gnathostome heterostracans. However, its anatomy remains poorly understood. Here, we use X-ray microtomography to characterize the feeding apparatus of the pteraspid heterostracan Rhinopteraspis dunensis (Roemer, 1855). The apparatus is composed of 13 plates arranged approximately bilaterally, most of which articulate from the postoral plate. Our reconstruction shows that the oral plates were capable of rotating around the transverse axis, but likely with limited movement. It also suggests the nasohypophyseal organs opened internally, into the pharynx. The functional morphology of the apparatus in Rhinopteraspis precludes all proposed interpretations of feeding except for suspension/deposit feeding and we interpret the apparatus as having served primarily to moderate the oral gape. This is consistent with evidence that at least some early jawless gnathostomes were suspension feeders and runs contrary to macroecological scenarios that envisage early vertebrate evolution as characterized by a directional trend towards increasingly active food acquisition.

The hydrodynamics and kinematics of the appendicularian tail underpin peristaltic pumping

Planktonic organisms feed while suspended in water using various hydrodynamic pumping strategies. Appendicularians are a unique group of plankton that use their tail to pump water over mucous mesh filters to concentrate food particles. As ubiquitous and often abundant members of planktonic ecosystems, they play a major role in oceanic food webs. Yet, we lack a complete understanding of the fluid flow that underpins their filtration. Using high-speed, high-resolution video and micro particle image velocimetry, we describe the kinematics and hydrodynamics of the tail in Oikopleura dioica in filtering and free-swimming postures. We show that sinusoidal waves of the tail generate peristaltic pumping within the tail chamber with fluid moving parallel to the tail when filtering. We find that the tail contacts attachment points along the tail chamber during each beat cycle, serving to seal the tail chamber and drive pumping. When we tested how the pump performs across environmentally relevant temperatures, we found that the amplitude of the tail was invariant but tail beat frequency increased threefold across three temperature treatments (5°C, 15°C and 25°C). Investigation into this unique pumping mechanism gives insight into the ecological success of appendicularians and provides inspiration for novel pump designs.

Depuration of ingested 14C-labelled polystyrene nanospheres in the Atlantic scallop (Placopecten magellanicus)

The presence of nano-plastics in marine bivalves is well established and may represent a risk to human consumption. The main objective of our work was to study the detailed tissue distribution of 14C-radiolabelled polystyrene nanospheres (PSNP; 325 nm) following their ingestion by commercial-size Atlantic scallop (Placopecten magellanicus) using whole-body autoradiography to assess their translocation, bioaccumulation and depuration mechanisms over a short-term exposure (6h) and a long-term exposure (2 weeks). Results showed that the nanospheres (PSNP) did not accumulate in scallop tissues despite the fact they were ingested and transported all along the digestive system. Elimination of the PSNP was virtually completed within 48 h and no radiolabeling appeared in the edible adductor muscle. This is indicative of the presence of an active depuration mechanism of particles without nutritional value as plastic PSNP. Our preliminary work indicates a rapid translocation of PSNP in scallops minimizing a possible transfer to human consumers.

On the paradox of thriving cold-water coral reefs in the food-limited deep sea

The deep sea is amongst the most food-limited habitats on Earth, as only a small fraction (<4%) of the surface primary production is exported below 200 m water depth. Here, cold-water coral (CWC) reefs form oases of life: their biodiversity compares with tropical coral reefs, their biomass and metabolic activity exceed other deep-sea ecosystems by far. We critically assess the paradox of thriving CWC reefs in the food-limited deep sea, by reviewing the literature and open-access data on CWC habitats. This review shows firstly that CWCs typically occur in areas where the food supply is not constantly low, but undergoes pronounced temporal variation. High currents, downwelling and/or vertically migrating zooplankton temporally boost the export of surface organic matter to the seabed, creating 'feast' conditions, interspersed with 'famine' periods during the non-productive season. Secondly, CWCs, particularly the most common reef-builder Desmophyllum pertusum (formerly known as Lophelia pertusa), are well adapted to these fluctuations in food availability. Laboratory and in situ measurements revealed their dietary flexibility, tissue reserves, and temporal variation in growth and energy allocation. Thirdly, the high structural and functional diversity of CWC reefs increases resource retention: acting as giant filters and sustaining complex food webs with diverse recycling pathways, the reefs optimise resource gains over losses. Anthropogenic pressures, including climate change and ocean acidification, threaten this fragile equilibrium through decreased resource supply, increased energy costs, and dissolution of the calcium-carbonate reef framework. Based on this review, we suggest additional criteria to judge the health of CWC reefs and their chance to persist in the future.

Environmental stress and nanoplastics' effects on Ciona robusta: regulation of immune/stress-related genes and induction of innate memory in pharynx and gut

In addition to circulating haemocytes, the immune system of the solitary ascidian Ciona robusta relies on two organs, the pharynx and the gut, and encompasses a wide array of immune and stress-related genes. How the pharynx and the gut of C. robusta react and adapt to environmental stress was assessed upon short or long exposure to hypoxia/starvation in the absence or in the presence of polystyrene nanoplastics. We show that the immune response to stress is very different between the two organs, suggesting an organ-specific immune adaptation to the environmental changes. Notably, the presence of nanoplastics appears to alter the gene modulation induced by hypoxia/starvation in both organs, resulting in a partial increase in gene up-regulation in the pharynx and a less evident response to stress in the gut. We have also assessed whether the hypoxia/starvation stress could induce innate memory, measured as gene expression in response to a subsequent challenge with the bacterial agent LPS. Exposure to stress one week before challenge induced a substantial change in the response to LPS, with a general decrease of gene expression in the pharynx and a strong increase in the gut. Co-exposure with nanoplastics only partially modulated the stress-induced memory response to LPS, without substantially changing the stress-dependent gene expression profile in either organ. Overall, the presence of nanoplastics in the marine environment seems able to decrease the immune response of C. robusta to stressful conditions, hypothetically implying a reduced capacity to adapt to environmental changes, but only partially affects the stress-dependent induction of innate memory and subsequent responses to infectious challenges.

Suspension feeding in Copepoda (Crustacea) - a numerical model of setae acting in concert

Suspension feeding via setae collecting particles is common within Crustacea. Even though the mechanisms behind it and the structures themselves have been studied for decades, the interplay between the different setae types and the parameters contributing to their particle collecting capacities remain partly enigmatic. Here, we provide a numerical modeling approach to understand the relationship among the mechanical property gradients, the mechanical behavior and the adhesion of setae, and the feeding efficiency of the system. In this context, we set-up a simple dynamic numerical model that takes all of these parameters into account and describes the interaction with food particles and their delivery into the mouth opening. By altering the parameters, it was unraveled that the system performs best when the long and short setae have different mechanical properties and different degrees of adhesion since the long setae generate the feeding current and the short ones establish the contact with the particle. This protocol can be applied to any system in the future as the parameters (i.e., properties and arrangement of particles and setae) can be easily altered. This will shed light on the biomechanical adaptations of these structures to suspension feeding and provide inspiration for biomimetics in the field of filtration technologies.

Hydrodynamic analysis of bioinspired vortical cross-step filtration by computational modelling

Research on the suspension-feeding apparatus of fishes has led recently to the identification of novel filtration mechanisms involving vortices. Structures inside fish mouths form a series of 'backward-facing steps' by protruding medially into the mouth cavity. In paddlefish and basking shark mouths, porous gill rakers lie inside 'slots' between the protruding branchial arches. Vortical flows inside the slots of physical models have been shown to be important for the filtration process, but the complex flow patterns have not been visualised fully. Here we resolve the three-dimensional hydrodynamics by computational fluid dynamics simulation of a simplified mouth cavity including realistic flow dynamics at the porous layer. We developed and validated a modelling protocol in ANSYS Fluent software that combines a porous media model and permeability direction vector mapping. We found that vortex shape and confinement to the medial side of the gill rakers result from flow resistance by the porous gill raker surfaces. Anteriorly directed vortical flow shears the porous layer in the centre of slots. Flow patterns also indicate that slot entrances should remain unblocked, except for the posterior-most slot. This new modelling approach will enable future design exploration of fish-inspired filters.

Occurrence and Characterization of Small Microplastics (<100 μm), Additives, and Plasticizers in Larvae of Simuliidae

This study is the first to investigate the ingestion of microplastics (MPs), plasticizers, additives, and particles of micro-litter < 100 μm by larvae of Simuliidae (Diptera) in rivers. Blackflies belong to a small cosmopolitan insect family whose larvae are present alongside river courses, often with a torrential regime, up to their mouths. Specimens of two species of blackfly larvae, Simulium equinum and Simulium ornatum, were collected in two rivers in Central Italy, the Mignone and the Treja. Small microplastics (SMPs, <100 μm), plasticizers, additives, and other micro-litter components, e.g., natural and non-plastic synthetic fibers (APFs) ingested by blackfly larvae were, for the first time, quantified and concurrently identified via MicroFTIR. The pretreatment allowed for simultaneous extraction of the ingested SMPs and APFs. Strong acids or strong oxidizing reagents and the application of temperatures well above the glass transition temperature of polyamide 6 and 6.6 (55−60 °C) were not employed to avoid further denaturation/degradation of polymers and underestimating the quantification. Reagent and procedural blanks did not show any SMPs or APFs. The method’s yield was >90%. Differences in the abundances of the SMPs and APFs ingested by the two species under exam were statistically significant. Additives and plasticizers can be specific to a particular polymer; thus, these compounds can be proxies for the presence of plastic polymers in the environment.

Biomimetics Linked to Classical Product Development: An Interdisciplinary Endeavor to Develop a Technical Standard

Biomimetics is a well-known approach for technical innovation. However, most of its influence remains in the academic field. One option for increasing its application in the practice of technical design is to enhance the use of the biomimetic process with a step-by-step standard, building a bridge to common engineering procedures. This article presents the endeavor of an interdisciplinary expert panel from the fields of biology, engineering science, and industry to develop a standard that links biomimetics to the classical processes of product development and engineering design. This new standard, VDI 6220 Part 2, proposes a process description that is compatible and connectable to classical approaches in engineering design. The standard encompasses both the solution-based and the problem-driven process of biomimetics. It is intended to be used in any product development process for more biomimetic applications in the future.