Copper hypersensitivity

In vitro assessment of antibacterial and antiviral activity of three copper products after 200 rounds of simulated use

Copper has well-documented antibacterial effects but few have evaluated it after prolonged use and against bacteria and viruses. Coupons from three copper formulations (solid, thermal coating, and decal applications) and carbon steel controls were subjected to 200 rounds simulated cleaning using a Wiperator™ and either an accelerated hydrogen peroxide, quaternary ammonium, or artificial sweat products. Antibacterial activity against S. aureus and P. aeruginosa was then evaluated using a modified Environmental Protection Agency protocol. Antiviral activity against coronavirus (229E) and norovirus (MNV-1) surrogates was assessed using the TCID50 method. Results were compared to untreated control coupons. One hour after inoculation, S. aureus exhibited a difference in log kill of 1.16 to 4.87 and P. aeruginosa a log kill difference of 3.39-5.23 (dependent upon copper product and disinfectant) compared to carbon steel. MNV-1 demonstrated an 87-99% reduction on each copper surfaces at 1 h and 99% reduction at 2 h compared to carbon steel. Similarly, coronavirus 229E exhibited a 97-99% reduction after 1 h and 90-99% after 2 h. Simulated use with artificial sweat did not hinder the antiviral nor the antibacterial activity of Cu surfaces. Self-sanitizing copper surfaces maintained antibacterial and antiviral activity after 200 rounds of simulated cleaning.

One-year trial evaluating the durability and antimicrobial efficacy of copper in public transportation systems

Surfaces on transit vehicles are frequently touched and could potentially act as reservoirs for micro-organism transmission. Regular cleaning and disinfection to minimize the spread of micro-organisms is operationally challenging due to the need to keep vehicles in circulation. The application of copper (Cu) alloys to high- touch surfaces could help reduce the risk of cross-contamination, however, little is known about the durability and efficacy of engineered copper surfaces after prolonged use. Three Cu products (decal, thermal fabrication, and alloy covers) were assessed over a 12-month period. These Cu products were randomly installed on 110 stanchions on three buses and four train (SkyTrain) cars in Vancouver and three buses, two subway cars, and two streetcars in Toronto with mirrored control surfaces directly opposite. Bacterial counts (Colony forming units, CFU) and ATP bioluminescence (ATPB) were measured every two months after peak morning routes. Durability of the Cu products were assessed monthly through visual inspection and colorimetry assays or by ex-situ microscopy. Cu products on stanchions reduced the mean colony forming units (CFU) of all vehicles by 42.7% in the mean CFU (0.573 (CI 95% 0.453-0.726), p-value < 0.001) compared to control surfaces. The three Cu products exhibited an overall 87.1% reduction in the mean ATPB readings (0.129 (CI 95% 0.059-0.285, p-value < 0.001) compared to controls. Surface Cu concentration for all three products was consistent throughout the 12-month period. Electron microscopy (SEM) and Energy-dispersive X-ray Spectroscopy (EDS) cross-sectional analysis showed no change in thickness or dealloying of Cu products, however SEM top-down analysis revealed substantial carbon accumulation on all surfaces. Cu products installed on transit vehicles maintained antimicrobial efficacy and durability after 12 months of use.

Development of novel antimicrobial acrylic denture modified with copper nanoparticles

PURPOSE

This study aimed to synthesize heat-cured poly(methyl methacrylate) (PMMA) acrylic formulated with copper nanoparticles (nCu) for producing dentures with antimicrobial properties and ability to prevent denture stomatitis (DS).

METHODS

nCu/PMMA nanocomposites were prepared through in situ formation of nCu into methyl methacrylate (MMA). The fabricated material was characterized using scanning electron microscopy, spectroscopy (energy-dispersive X-ray, attenuated total reflectance-Fourier-transform infrared, and X-ray photoelectron spectroscopy), X-ray diffraction analysis, and mechanical flexural tests (ISO 20795-1:2008). Antimicrobial activity against Candida albicans and oral bacteria was determined. MTS assay (ISO 10993-5:2009) and copper release experiments were conducted to assess cytotoxicity. In the clinical trial, participants wearing nCu/PMMA (n=25) and PMMA (n=25) dentures were compared; specifically, DS incidence and severity and Candida species proliferation were assessed for 12 months. Data were analyzed using analysis of variance with Tukey's post hoc test (α=0.05).

RESULTS

nCu/PMMA nanocomposite loaded with 0.045% nCu exhibited the maximum antimicrobial activity against C. albicans and other oral bacteria without producing cytotoxicity in the wearer. nCu/PMMA dentures retained their mechanical and aesthetic properties as well as inhibited the growth of Candida species on both denture surface and patient palate. DS incidence and severity were lower in the nCu/PMMA denture group than in the PMMA denture group.

CONCLUSIONS

PMMA acrylic produced with copper nanotechnology is antimicrobial, biocompatible, and aesthetic and can reduce DS incidence. Thus, this material may act as a novel preventive alternative for oral infections associated with denture use.

Heavy metals in contact dermatitis: A review

Contact dermatitis is an inflammatory skin reaction caused by direct contact with chemical substances in the environment and can either be irritant or allergic in nature. The clinical symptoms of contact dermatitis, include local skin rash, itching, redness, swelling, and lesions. Nowadays, 15-20% of people have some degree of contact dermatitis, which can be more or less severe. Immune responses in allergic contact dermatitis (ACD) are due to the effects of cytokines and allergen-specific CD4⁺ and CD8⁺ T cells on the skin. Acids and alkalis such as drain cleaners, plants such as poinsettias, hair colors, and nail polish remover, are all prominent causes of irritant contact dermatitis (ICDs). Heavy metals are metallic elements with a high atomic weight that are hazardous in low quantities and are known to cause dermatitis after systemic or local exposure. Nickel (Ni), chromium (Cr), lead (Pb), and copper (Cu) are among the most common heavy metals used in various industries. Metal allergies may cause ACD and also systemic contact dermatitis (SCD). Contact dermatitis is detected by laboratory tests such as patch testing, lymphocyte stimulation test (LST), and evaluation of cytokine production by primary cultures of peripheral blood mononuclear cells. This article presents an update on the epidemiological and clinical characteristics of ACD and SCD caused by three heavy metals (Cr, Cu, and Pb). Ni is not discussed due to recent coverage. Furthermore, the effects of contact sensitivity to some other heavy metals, such as gold (Au), cobalt (Co), palladium (Pd), and mercury (Hg) are discussed.

Part 2: The Pediatric Hazards of Art Materials

Children can encounter art materials that contain hazardous substances at school, in the home, and during outside activities. Hazardous substances can be found in both art materials that are made to be used by children and art materials used by adults. Some of these materials can be severe irritants, allergens, carcinogens, or other chronic disease hazards. Many of the most frequently used and potentially most hazardous materials are found in the categories of solvents, pigments, and adhesives. Selected members of these categories and where they may be found in common art materials are briefly discussed. Preventive techniques that specifically address the potential hazards of each category are included. [Pediatr Ann. 2023;52(6):e219-e230.].

Occurrence and health implications of heavy metals in preschool children's clothing manufactured in four Asian regions

Clothing may be a potential contributor to body metal burden in children. However, available information on heavy metals in children's clothing is extremely limited and the associated health risks remain poorly understood. This study investigated the concentrations of Pb, Cd, Co, Zn, Cr, As, Cu and Ni in new preschool children's clothing manufactured in four Asian regions. The children's clothing had higher levels of Ni and Cr but lower levels of Pb and Cd in comparison to the concentrations reported in other textile products. The concentrations of Cd were higher in the black clothing than those in the white and color samples. The non-cotton samples contained higher Co concentrations. The Pb concentrations in the samples manufactured in China were significantly higher than those in the other three regions. We estimated the dermal exposure doses for these metals and calculated the associated risks. The results indicated that the health risks from exposure to these metals in the children's clothing were acceptable. However, more research is required to investigate heavy metals and the associated risks in child clothing due to the increasing complexity of their materials and manufacturing processes.

Determination of some heavy metals and their health risk in T-shirts printed for a special program

Heavy metals often are used in different textile processes, like dyeing and printing. When the toxic elements are present in more than recommended in textile materials they may impose potential risk to human health by absorption through the skin. In this study concentrations of some heavy metals (Co, Cu, Cr, Cd, and Pb) were analyzed in skin contact fading T-shirts printed for a special program at Mettu town using Atomic Absorption Spectroscopy with a microwave digestion method technique for sample preparation. High levels of Cu were found in black, green, blue, and red-colored T-shirts ranging from 26.726–179.315mg/kg. Cr exceeded the recommended limits in most samples of T-shirts and was mostly in yellow, black, and blue colors. Cd levels were found to be within normal ranges. However, all T-shirt samples had low levels of cobalt, ranging from 1.33±2.13 to3.94±0.21. Maximum lead concentrations were found to be 3.40 ± 0.19 mg/kg for red-colored samples and 2.71 ± 0.13 mg/kg for blue colored samples. The metal concentrations in the T-shirts investigated were also compared to the OEKO Tex standard 100 limits. In this investigation, the concentrations of Pb, Cu, and Cr in red and green colored T-shirt samples were above the OEKO Tex suggested standard value. Therefore a strict local and international regulation and measures need to be taken to avoid toxicity of the studied metals.

Assessment of dermal absorption of beryllium and copper contained in temple tips of eyeglasses

Dermal exposure to hazardous substances such as chemicals, toxics, metallic items and other contaminants may present substantial danger for health. Beryllium (Be) is a hazardous metal, especially when inhaled and/or in direct contact with the skin, associated with chronic beryllium disease (CBD) and Be sensitization (BeS). The objective of this study was to investigate the percutaneous penetration of beryllium and copper contained in metallic items as eyeglass temple tips (specifically BrushCAST® Copper Beryllium Casting Alloys containing Be 0.35 < 2.85%; Cu 95.3-98.7%), using Franz diffusion cells. This work demonstrated that the total skin absorption of Cu was higher (8.86%) compared to Be (4.89%), which was expected based on the high percentage of Cu contained in the eyeglass temple tips. However, Be accumulated significantly in the epidermis and dermis (up to 0.461 µg/cm²) and, to a lesser extent, in the stratum corneum (up to 0.130 µg/cm²) with a flux of permeation of 3.52 ± 4.5 µg/cm²/hour and lag time of 2.3 ± 1.3 h, after cutaneous exposure of temple tip into 1.0 mL artificial sweat for 24 h. Our study highlights the importance of avoiding the use of Be alloys in items following long-term skin contact.

Deleterious side effects of nutritional supplements

Vitamin and mineral supplement consumption is widespread. They are taken for a variety of conditions, including dermatologic disorders. Although consumers often assume these supplements are safe, excessive consumption of supplements may have deleterious effects. Such vitamin supplements include vitamin A, niacin, biotin, vitamin D, and vitamin E, and specific mineral supplements include zinc, copper, and iron. These supplements may have a number of potential adverse effects.

Mechanical and Chemical Characterisation of TiN and AlTiSiN Coatings on a LPBF Processed IN718 Substrate

Wear-resistant coatings development is progressively increasing steeply due to their advantages when applied to mechanical components subjected to abrasive and destructive environments. Titanium nitride (TiN) coating is typically used to enlarge tools and components' service life and improve their surface quality. On the other hand, AlTiSiN coating intends to be applied to more aggressive environments such as spatial satellites components exposed to solar radiation, extremely high temperatures, and random particles impact. In this work, specimens of Inconel 718 (IN718) were fabricated via laser powder bed fusion (LPBF), and physical vapour deposition (PVD)-deposited with TiN and AlTiSiN as coatings to mechanically and chemically characterise their surface. In this respect, microhardness testing and chemical analysis via glow discharge optical emission spectroscopy (GDOES) were performed. Later, roughness and wear behaviour analyses were carried out to evaluate the mechanical performance of both coatings and their surface and morphological features. The experimental observations allowed the analysis of both studied coatings by comparing them with the substrate processed via LPBF.

Bioactive Compounds for Skin Health: A Review

Human skin is continually changing. The condition of the skin largely depends on the individual’s overall state of health. A balanced diet plays an important role in the proper functioning of the human body, including the skin. The present study draws attention to bioactive substances, i.e., vitamins, minerals, fatty acids, polyphenols, and carotenoids, with a particular focus on their effects on the condition of the skin. The aim of the study was to review the literature on the effects of bioactive substances on skin parameters such as elasticity, firmness, wrinkles, senile dryness, hydration and color, and to define their role in the process of skin ageing.

Bioremediation mechanism and potential of copper by actively growing fungus Trichoderma lixii CR700 isolated from electroplating wastewater

Present study investigated the Cu²⁺ removal potential of Trichoderma lixii CR700, isolated from enormously heavy metal polluted electroplating wastewater. In the batch study, actively growing CR700 was able to remove 84.6% of Cu²⁺ at the concentration 10 mg/L of Cu²⁺ within 120 h after incubation and the accumulated and surface adsorbed amount of Cu was 0.51 and 0.47 mg/g of dry biomass respectively. T. lixii CR700 also showed efficient Cu²⁺ removal potential in the pH ranges from 5.0 to 8.0, in the presence of other co-occurring contaminant such as heavy metal, anions and metabolic inhibitor as well from real tannery wastewater. Alteration on cell surface of Cu²⁺ treated mycelia of T. lixii CR700 was analyzed using scanning electron microscope. Fourier transform infrared spectroscopic analysis was performed to identify the role of surface functional group in Cu²⁺ adsorption which revealed that COO^─ functional group lead Cu²⁺ adsorption onto the surface of T. lixii CR700. Thus, T. lixii CR700 uses simultaneous surface sorption and accumulation mechanism in Cu²⁺ removal and can be potentially applied for bioremediation of Cu²⁺ contaminated wastewater in ecofriendly, safe and sustainable way.

The Activation of Heat-Shock Protein After Copper(II) and/or Arsenic(III)-Induced Imbalance of Homeostasis, Inflammatory Response in Chicken Rectum

Arsenic and copper, two toxic pollutants, are powerful inducers of oxidative stress. Exposure to copper and arsenic can cause intestinal injury in cockerel. This study was carried out to investigate the effects of these two pollutants on the gastrointestinal tract of cockerels. Experimental results showed that the activity of antioxidant enzymes (catalase and glutathione peroxidase) was inhibited and the ionic balance was destroyed after exposure to copper sulfate (300 mg/kg) and/or arsenic trioxide (30 mg/kg). However, the expression of pro-inflammatory cytokines (nuclear factor kappa-B, cyclooxygenase-2, tumor necrosis factor-α, and prostaglandin E2 synthases) increased markedly. Damages to the biofilm structure and inflammatory cell infiltration were simultaneously observed during histological examination. Heat-shock proteins were also expressed in large quantities after exposure to the poisons. Collectively, exposure to arsenite and/or Cu²⁺ can cause rectal damage in cockerels, inducing inflammation and an imbalance in immune system responses. Sometimes, exposure to both pollutants can produce even more toxic effects. Heat-shock proteins can protect the tissue from the exotoxins but the specific mechanisms require exploration. After oral ingestion of toxins, the rectum can still be damaged, necessitating attention to the safety of poultry breeding, human food safety, and environmental protection.

A Comprehensive Artificial Sweat Study for Quantitation of Nickel and Other Inorganic Elements Released from Imitation Earrings Purchased in Istanbul Market

Element sensitization is frequent cause of allergic contact dermatitis, and Ni is the main reason for this condition owing to daily use of different Ni-containing items. European Union established a limit of 0.2 μg/cm²/week Ni release for the items by the Ni Directive in 2004. The aim of this study was to determine the amount of element release of imitation earrings sold in different points of Istanbul with different prices and consider the element release levels including 29 trace and toxic elements. After calculation of released nickel amounts, 31.80% of earrings (71 of 223) were observed over the limit of European Commission Directive's migration limit. Minimum and maximum nickel release amounts were found as 0.21 and 30.11 μg/cm²/week, respectively, and mean level was found 3.24 μg/cm²/week among 71 positive earrings. Results showed that essential part of imitation earrings used especially by women release nickel particles over the European Commission Directive's migration limit. In addition, other elements such as Cu, Cr, and Co were found to be in the structure of the imitation earrings, as well as high amounts of toxic element Pb.

Metal nanomaterials: Immune effects and implications of physicochemical properties on sensitization, elicitation, and exacerbation of allergic disease

The recent surge in incorporation of metallic and metal oxide nanomaterials into consumer products and their corresponding use in occupational settings have raised concerns over the potential for metals to induce size-specific adverse toxicological effects. Although nano-metals have been shown to induce greater lung injury and inflammation than their larger metal counterparts, their size-related effects on the immune system and allergic disease remain largely unknown. This knowledge gap is particularly concerning since metals are historically recognized as common inducers of allergic contact dermatitis, occupational asthma, and allergic adjuvancy. The investigation into the potential for adverse immune effects following exposure to metal nanomaterials is becoming an area of scientific interest since these characteristically lightweight materials are easily aerosolized and inhaled, and their small size may allow for penetration of the skin, which may promote unique size-specific immune effects with implications for allergic disease. Additionally, alterations in physicochemical properties of metals in the nano-scale greatly influence their interactions with components of biological systems, potentially leading to implications for inducing or exacerbating allergic disease. Although some research has been directed toward addressing these concerns, many aspects of metal nanomaterial-induced immune effects remain unclear. Overall, more scientific knowledge exists in regards to the potential for metal nanomaterials to exacerbate allergic disease than to their potential to induce allergic disease. Furthermore, effects of metal nanomaterial exposure on respiratory allergy have been more thoroughly-characterized than their potential influence on dermal allergy. Current knowledge regarding metal nanomaterials and their potential to induce/exacerbate dermal and respiratory allergy are summarized in this review. In addition, an examination of several remaining knowledge gaps and considerations for future studies is provided.

Assessment of skin sensitizing potential of metals with β-galactosidase-expressing E. coli culture system

It has been a challenge to develop in vitro alternative test methods for accurate prediction of metallic products which may exert skin sensitization, as several test methods adopted by OECD were relatively ineffective in assessing the capacity for metallic compounds to exert sensitizing reactions, compared with organic test substances. Based upon these findings, a system that incorporates β-galactosidase producing E. coli cultures was tested for its predictive capacity to well-known metallic sensitizers. In this system, E. coli cells were incubated with metal salts at various concentrations and β-galactosidase suppression by each test metal was determined. Fourteen local lymph node assay (LLNA) categorized metal salts were examined. Although color interference from metal salts was minimal, a fluorometric detection system was also employed using 4-methylumbelliferyl galactopyranoside as a substrate for β-galactosidase to avoid the color interference, concomitantly with the original UV-spectrometric method. Data demonstrated that two detection methods were comparable and complementary. In addition, most of the metallic sensitizers were correctly identified at 0.6 and 0.8 mM concentrations. Despite the lower specificity obtained in the current study and small number of substances tested, the developed method appears to be a relatively simple and effective in vitro method for detecting metallic sensitizers. When 61 chemicals tested in the β-galactosidase producing E. coli cultures including the present study were collectively analyzed, the prediction capacity was as high as other OECD-adopted tests: 95.6% of sensitivity, 66.7% of specificity, and 88.5% of accuracy. It is important to emphasize that animals or mammalian cell cultures were not required in the current method, which are in accordance with the EU guidelines on restricted or banned animal testing.

Discrepant effects of copper (II) stress on different types of skeletal muscles in chicken: Elements and amino acids

Different distributions of 28 elements and 17 amino acids in pectoralis, wing biceps brachii and leg gastrocnemius of chicken upon CuSO₄ (300 mg/kg) exposure for 90 days were investigated. Accompanied by copper accumulation, pathological injuries were observed in those three kinds of skeletal muscles using histological and ultrastructural methods. Based on data obtained, we analyzed leg gastrocnemius displayed the most increases (P < 0.000) in all three kinds of elements detected, including macroelements (131%), essential microelements (129%) and toxic microelements (179%) than the other two skeletal muscles. Furthermore, decreased total amino acids (P = 0.006), a susceptibility of lipid peroxidation/oxidative stress and a disequilibrium of nutrition and taste were analyzed in the leg gastrocnemius, indicating an unsuitability for human consumption. Intriguingly, these anomalies were scarce in pectoralis and wing biceps brachii. Combined with multivariate analysis we may conclude that leg gastrocnemius are more vulnerable to copper stress than pectoralis and wing biceps brachii in chicken.

Benefits of hardware removal after plating

Routine implant removal is frequently performed although evidence-based guidelines are lacking. But routinely planned implant removal has significant economic implications and shows considerable complication rates. In general, clinical outcome seems to improve but pain relief after operation is often unpredictable. Even in patients reporting implant-related pain, implant removal does not guarantee relief and may be associated with further complications. The intra- and postoperative complication rate remains very high. Implant removal demonstrates a significant learning curve and unsupervised junior surgeons tend to cause more complications. The need for implant removal may be questioned. Even with the implant in place, contact activities can be resumed. However, a new adequate trauma can create a new fracture independently if there is an implant in-situ or not. It is important to understand the complications and outcomes to be expected with hardware removal to carefully evaluate its indication.

Amalgam Contact Allergy in Oral Lichenoid Lesions

BACKGROUND

Oral lichenoid lesions (OLLs) cannot be distinguished from oral lichen planus (OLP) except that causative factors can be identified. Amalgam is one of the causative allergens, and replacement may lead to resolution.

OBJECTIVES

The aim of this study was to determine the prevalence, prognosis, and aggravating factors of amalgam contact allergy in patients with OLLs.

METHODS

A clinical retrospective and prospective cohort study was carried out at the Dermatology Department, Siriraj Hospital, Mahidol University. In cases with patch test positive for an amalgam component, patients were suggested to replace their amalgam restorations.

RESULTS

Of 53 patients with OLLs, 39 (73.6%) had positive patch test results, and 31 (58.5%) reacted to at least one amalgam component. The most common causative allergen was mercury (35.8%). Lesions on bilateral buccal mucosa and gingiva tended to have negative patch test results (P < 0.05). Spicy food was the main aggravating factor. Amalgam replacements were performed in 10 patients. Clinical improvement was observed in all cases with complete healing in 3 cases.

CONCLUSIONS

The prevalence of amalgam contact allergy in patients with OLLs was 58.5%. Mercury was the most common allergen, followed by copper sulfate. An association between clinical, topographic relation, and positive patch test results would be a useful predictor for favorable outcome after amalgam removal.

Patch Testing for Evaluation of Hypersensitivity to Implanted Metal Devices: A Perspective From the American Contact Dermatitis Society

The American Contact Dermatitis Society recognizes the interest in the evaluation and management of metal hypersensitivity reactions. Given the paucity of robust evidence with which to guide our practices, we provide reasonable evidence and expert opinion-based guidelines for clinicians with regard to metal hypersensitivity reaction testing and patient management. Routine preoperative evaluation in individuals with no history of adverse cutaneous reactions to metals or history of previous implant-related adverse events is not necessary. Patients with a clear self-reported history of metal reactions should be evaluated by patch testing before device implant. Patch testing is only 1 element in the assessment of causation in those with postimplantation morbidity. Metal exposure from the implanted device can cause sensitization, but a positive metal test does not prove symptom causality. The decision to replace an implanted device must include an assessment of all clinical factors and a thorough risk-benefit analysis by the treating physician(s) and patient.

The Many Faces of Graphene as Protection Barrier. Performance under Microbial Corrosion and Ni Allergy Conditions

In this work we present a study on the performance of CVD (chemical vapor deposition) graphene coatings grown and transferred on Ni as protection barriers under two scenarios that lead to unwanted metal ion release, microbial corrosion and allergy test conditions. These phenomena have a strong impact in different fields considering nickel (or its alloys) is one of the most widely used metals in industrial and consumer products. Microbial corrosion costs represent fractions of national gross product in different developed countries, whereas Ni allergy is one of the most prevalent allergic conditions in the western world, affecting around 10% of the population. We found that grown graphene coatings act as a protective membrane in biological environments that decreases microbial corrosion of Ni and reduces release of Ni²⁺ ions (source of Ni allergic contact hypersensitivity) when in contact with sweat. This performance seems not to be connected to the strong orbital hybridization that Ni and graphene interface present, indicating electron transfer might not be playing a main role in the robust response of this nanostructured system. The observed protection from biological environment can be understood in terms of graphene impermeability to transfer Ni²⁺ ions, which is enhanced for few layers of graphene grown on Ni. We expect our work will provide a new route for application of graphene as a protection coating for metals in biological environments, where current strategies have shown short-term efficiency and have raised health concerns.

Exposure of women to trace elements through the skin by direct contact with underwear clothing

Heavy metals pose a potential danger to human health when present in textile materials. In the present study, inductive coupled plasma mass spectrometry (ICPMS) was used to determine the concentrations and the identity of extractable inorganic elements from different brands of women undergarments. A total of 120 samples consisting of 63 cottons, 44 nylons and 13 polyesters manufactured in 14 different countries having different colors were analyzed for their extractable metals contents. Elements analyzed were Ag, Al, As, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Li, Mg, Mn, Na, Ni, Pb, Sb, Se, Sr, Ti, V and Zn. Cotton undergarments were rich in Al, Fe and Zn, nylon undergarments had high levels of Cr, Cu and Al, while polyester fabrics contained higher levels of Ni and Fe compared to cotton or nylon. With respect to manufacturing countries, China, Egypt and India showed the highest concentrations of metals in all fabrics. With respect to the color, black garments were characteristic by high concentration of Fe, blue colors with Cu, brown garments with Fe and Cu, green garments with Cu and Fe, pink garments with Al, purple garments with Al and Cu and red garments with Cr, Zn and Al. The consumer should be made aware of the potential dangers of these metals in their clothing.

Selected Biomarkers Revealed Potential Skin Toxicity Caused by Certain Copper Compounds

Copper is an essential mineral and plays important roles in skin growth and activity. Copper delivery through skin can provide beneficial effects but its potential to induce skin irritation reactions is often overlooked. Data on dermal toxicity caused by copper compounds is scant. Some recognized in vitro skin toxicity methods are unsuitable for all metal compounds. Here, we employ a keratinocyte-based model and evaluated the skin irritation potential of copper compounds at cellular, genomic and proteomic levels. We determined cell viability and cytotoxicity by using tetrazolium reduction assay and Lactate Dehydrogenase (LDH) assay, performed real-time PCR and protein quantification to assess the expression of biomarkers after treating cells with copper peptide (GHK-Cu), copper chloride (CuCl₂) and copper acetate (Cu(OAc)₂). These copper compounds exhibited different irritancy potentials at the same treatment concentrations. GHK-Cu was not cytotoxic and did not induce any significant change in the expression levels of various skin irritation-related biomarkers. IL-1α and IL-8, HSPA1A and FOSL1 were significantly upregulated following 24-h treatment with CuCl₂ and Cu(OAc)₂ at 58 and 580 μM without concomitant inhibition in cell viability. GHK-Cu has a low potential of inducing skin irritation and therefore provides a safer alternative for the delivery of copper through skin.

Copper toxicology, oxidative stress and inflammation using zebrafish as experimental model

Copper is an essential micronutrient and a key catalytic cofactor in a wide range of enzymes. As a trace element, copper levels are tightly regulated and both its deficit and excess are deleterious to the organism. Under inflammatory conditions, serum copper levels are increased and trigger oxidative stress responses that activate inflammatory responses. Interestingly, copper dyshomeostasis, oxidative stress and inflammation are commonly present in several chronic diseases. Copper exposure can be easily modeled in zebrafish; a consolidated model in toxicology with increasing interest in immunity-related research. As a result of developmental, economical and genetic advantages, this freshwater teleost is uniquely suitable for chemical and genetic large-scale screenings, representing a powerful experimental tool for a whole-organism approach, mechanistic studies, disease modeling and beyond. Copper toxicological and more recently pro-inflammatory effects have been investigated in both larval and adult zebrafish with breakthrough findings. Here, we provide an overview of copper metabolism in health and disease and its effects on oxidative stress and inflammation responses in zebrafish models. Copper-induced inflammation is highlighted owing to its potential to easily mimic pro-oxidative and pro-inflammatory features that combined with zebrafish genetic tractability could help further in the understanding of copper metabolism, inflammatory responses and related diseases. Copyright © 2016 John Wiley & Sons, Ltd.

Human exposure to trace elements through the skin by direct contact with clothing: Risk assessment

Metals in textile products and clothing are used for many purposes, such as metal complex dyes, pigments, mordant, catalyst in synthetic fabrics manufacture, synergists of flame retardants, antimicrobials, or as water repellents and odour-preventive agents. When present in textile materials, heavy metals may mean a potential danger to human health. In the present study, the concentrations of a number of elements (Al, As, B, Ba, Be, Bi, Cd, Co, Cr, Cu, Fe, Hg, Mg, Mn, Mo, Ni, Pb, Sb, Sc, Se, Sm, Sn, Sr, Tl, V, and Zn) were determined in skin-contact clothes. Analysed clothes were made of different materials, colours, and brands. Interestingly, we found high levels of Cr in polyamide dark clothes (605 mg/kg), high Sb concentrations in polyester clothes (141 mg/kg), and great Cu levels in some green cotton fabrics (around 280 mg/kg). Dermal contact exposure and human health risks for adult males, adult females, and for <1-year-old children were assessed. Non-carcinogenic and carcinogenic risks were below safe (HQ<1) and acceptable (<10(-6)) limits, respectively, according to international standards. However, for Sb, non-carcinogenic risk was above 10% of the safety limit (HQ>0.1) for dermal contact with clothes.

Using Copper to Improve the Well-Being of the Skin

Copper has two key properties that are being exploited in consumer and medical device products in the last decade. On the one hand, copper has potent biocidal properties. On the other hand, copper is involved in numerous physiological and metabolic processes critical for the appropriate functioning of almost all tissues in the human body. In the skin, copper is involved in the synthesis and stabilization of extracellular matrix skin proteins and angiogenesis. This manuscript reviews clinical studies that show that the use of textile consumer and medical device products, embedded with microscopic copper oxide particles, improve the well-being of the skin. These include studies showing a) cure of athlete’s foot infections and improvement in skin elasticity, especially important for individuals suffering from diabetes; b) reduction of facial fine line and wrinkles; and c) enhancement of wound healing; by copper oxide embedded socks, pillowcases and wound dressings, respectively. The manuscript also reviews and discusses the mechanisms by which the presence of copper in these products improves skin well-being.