Damage of Escherichia coli membrane by bactericidal agent polyhexamethylene guanidine hydrochloride: micrographic evidences

Durable and Robust Antibacterial Polypropylene Hernia Mesh for Abdominal Wall Defect Repair

Polypropylene (PP) mesh is commonly used in repairing abdominal wall hernia (AWH). However, the use of synthetic prosthesis comes with the risk of developing a prosthetic infection, resulting in delayed healing, secondary surgery, and potentially increased mortality. To address these issues, a facile surface functionalization strategy for PP mesh based on phytic acid (PA) and polyhexamethylene guanidine (PHMG) was constructed through a one-step co-deposition process, referred to as the PA/PHMG coating. The development of PA/PHMG coating is mainly attributed to the surface affinity of PA and the electrostatic interactions between PA and PHMG. The PA/PHMG coating could be completed within 4 h under mild conditions. The prepared PA/PHMG coatings on PP mesh surfaces exhibited desirable biocompatibility toward mammalian cells and excellent antibacterial properties against the notorious "superbug" methicillin-resistant Staphylococcus aureus (MRSA) and tetracycline-resistant Escherichia coli (TRE). The PA/PHMG-coated PP meshes showed killing ratios of over 99% against MRSA in an infected abdominal wall hernia repair model. Furthermore, histological and immunohistochemical analysis revealed a significantly attenuated degree of neutrophil infiltration in the PA/PHMG coating group, attributed to the decreased bacterial numbers alleviating the inflammatory response at the implant sites. Meanwhile, the pristine PP and PA/PHMG-coated meshes showed effective tissue repair, with the PA/PHMG coating group exhibiting enhanced angiogenesis compared with pristine PP meshes, suggesting superior tissue restoration. Additionally, PP meshes with the highest PHMG weight ratio (PA/PHMG(3)) exhibited excellent long-term robustness under phosphate-buffered saline (PBS) immersion with a killing ratio against MRSA still exceeding 95% after 60 days of PBS immersion. The present work provides a facile and promising approach for developing antibacterial implants.

Polyhexamethylene guanidine phosphate induces pyroptosis via reactive oxygen species-regulated mitochondrial dysfunction in bronchial epithelial cells

Pyroptosis is a form of programmed cell death characterized by gasdermin (GSDM)-mediated pore formation in the cell membrane, resulting in the release of pro-inflammatory cytokines and cellular lysis. Increasing evidence has shown that pyroptosis is responsible for the progression of various pulmonary disorders. The inhalation of polyhexamethylene guanidine (PHMG) causes severe lung inflammation and pulmonary toxicity; however, the underlying mechanisms are unknown. Therefore, in this study, we investigate the role of pyroptosis in PHMG-induced pulmonary toxicity. We exposed bronchial epithelial cells, BEAS-2B, to PHMG phosphate (PHMG-p) and evaluated cell death type, reactive oxygen species (ROS) levels, and relative expression levels of pyroptosis-related proteins. Our data revealed that PHMG-p reduced viability and induced morphological alterations in BEAS-2B cells. Exposure to PHMG-p induced excessive accumulation of mitochondrial ROS (mtROS) in BEAS-2B cells. PHMG-p activated caspase-dependent apoptosis as well as NLRP3/caspase-1/GSDMD-mediated- and caspase-3/GSDME-mediated pyroptosis through mitochondrial oxidative stress in BEAS-2B cells. Notably, PHMG-p reduced mitochondrial respiratory function and induced the translocation of Bax and cleaved GSDM into the mitochondria, leading to mitochondrial dysfunction. Our results enhanced our understanding of PHMG-p-induced lung toxicity by demonstrating that PHMG-p induces pyroptosis via mtROS-induced mitochondrial dysfunction in bronchial epithelial cells.

Substitution of bridge carbons for sulphur in calix[4]arene-bis-α-hydroxymethylphosphonic acid transformed mobile carrier into ionic channel accompanied with evoked muscle contraction and impaired neurotransmission powered by membrane action of resulting thiocalix[4]arene-bis-α-hydroxymethylphosphonic acid

The action of calix[4]arenes C-424, C-425 and C-1193 has been investigated on suspended cholesterol/egg phosphatidylcholine lipid bilayer in a voltage-clamp mode. Comparative analysis with the membrane action by calix[4]arene-bis-α-hydroxymethylphosphonic acid (C-99) has shown that the substitution of bridge carbons for sulphur and addition of another methyl group to two alkyl tales in the lower rim of former dipropoxycalix[4]arene C-99 transformed mobile carrier that C-99 created in lipid bilayer (Shatursky et al., 2014) into a transmembrane pore as exposure of the bilayer membrane to sulphur-containing derivative dibutoxythiocalix[4]arene C-1193 resulted in microscopic transmembrane current patterns indicative of a channel-like mode of facilitated diffusion. Within all calix[4]arenes tested a net steady-state voltage-dependent transmembrane current was readily achieved only after addition of calix[4]-arene C-1193. In comparison with the membrane action of C-99 the current induced by calix[4]-arene C-1193 exhibited a much weakened anion selectivity passing slightly more current at positive potentials applied from the side of bilayer membrane to which the calix[4]-arene was added. Testing C-1193 for the membrane action against smooth muscle cells of rat uterus or swine myometrium and synaptosomes of rat brain nerve terminals revealed an increase in intracellular concentration of Ca2+ with reduction of the effective hydrodynamic diameter of the smooth muscle cells and enhanced basal extracellular level of neurotransmitters (glutamate and γ-aminobutyric acid) after C-1193-induced depolarization of the nerve terminals.

Treatment of Microsporidium Nosema bombycis Spores with the New Antiseptic M250 Helps to Avoid Bacterial and Fungal Contamination of Infected Cultures without Affecting Parasite Polar Tube Extrusion

Microsporidia are a group of widespread eukaryotic spore-forming intracellular parasites of great economic and scientific importance. Since microsporidia cannot be cultured outside of a host cell, the search for new antimicrosporidian drugs requires an effective antiseptic to sterilize microsporidian spores to infect cell lines. Here, we show that a new polyhexamethylene guanidine derivative M250, which is active against fungi and bacteria at a concentration of 0.5-1 mg/L, is more than 1000 times less effective against spores of the microsporidium Nosema bombycis, a highly virulent pathogen of the silkworm Bombyx mori (LC50 is 0.173%). Treatment of N. bombycis spores that were isolated non-sterilely from silkworm caterpillars with 0.1% M250 solution does not reduce the rate of spore polar tube extrusion. However, it completely prevents contamination of the Sf-900 III cell culture medium by microorganisms in the presence of antibiotics. The addition of untreated spores to the medium results in contamination, whether antibiotics are present or not. Since 0.1% M250 does not affect spore discharging, this compound may be promising for preventing bacterial and fungal contamination of microsporidia-infected cell cultures.

Comparison of cytotoxic, apoptotic and oxidative properties of Akacid plus and chlorhexidine in corneal epithelial cell culture

PURPOSE

This study aims to compare the cytotoxic, apoptotic, and oxidative effects of a new cationic disinfectant, Akacid Plus, with chlorhexidine, on the human corneal epithelial cell line.

METHODS

Time-dependent cytotoxicity studies were performed with the Alamar Blue method. Apoptotic activity was investigated by flow cytometric methods. Reactive oxygen species levels were measured with the ROS cellular test kit. BAX, BCL2 and caspase 3, 9, 12 mRNA expressions were evaluated by PCR, as well as BAX and BCL2 protein expressions by Western-Blot.

RESULTS

At the fifth minute of the treatment, the viability was 68.15% with Akacid Plus and 43.95% with chlorhexidine. At the 15th minute, no significant difference was observed with both solutions. In the apoptotic evaluation, Akacid Plus significantly increased the early and late apoptotic activity in the cell line (p < 0.0001), while a significant increase was observed in late apoptosis and necrosis levels with chlorhexidine (p < 0.001). Chlorhexidine also induced gene expression of BAX, BCL2, caspase 3, 9 and BAX proteins (p < 0.05), while reducing protein expression of BCL2 (p < 0.001). Akacid Plus induced the gene expressions of BCL2, CASP3 and caspase 9, reduced gene expressions of BAX and caspase 12 and protein expression of BCL2 (p < 0.05). No significant difference was observed in the ROS level with both solutions (p > 0.05).

CONCLUSION

Due to the widespread use of cationic polymers in ophthalmology, this new molecule with high antimicrobial activity and relatively low cytotoxicity may be of interest for clinical use. Further investigations are necessary to fully understand the ophthalmologic potential of this solution.

Preparation of grafted starch by IPDI coupling and its antibacterial properties

Antibacterial acetate grafted starch (AGS) was synthesized by isophorone diisocyanate (IPDI) coupling acetate esterified starch (AST) and the antimicrobial agent polyhexamethyleneguanidine hydrochloride (PHMG), and the antimicrobial properties of AGS were evaluated. The process parameters of AGS were: IPDI reacted with PHMG at 120 °C for 1 h, then, reacted with starch at 60 °C for 3 h. The grafting yield of PHMG and starch reached 28.43%. The Fourier transform infrared spectroscopy (FTIR) and Nuclear magnetic resonance (1H NMR) showed that the binding of IPDI to PHMG was successfully grafted on the AS. The antibacterial effect of AGS was investigated. AGS produced inhibition zones and confirmed its significant inhibitory effect on Escherichia coli and Staphylococcus aureus, as the grafting yield increased, the inhibition effect on bacteria became stronger. When the grafting yield was 28.43%, the inhibition rate of AGS was 90.24% for Escherichia coli. and 94.45% for Staphylococcus aureus. The experiments of water washing showed that after AGS was washed 10 times with water, the inhibition rate of AGS to E. coli. only reduced 3.04% and that of S. aureus 2.95%, indicating that the combination of PHMG and starch was stable and the inhibition effect was long-lasting, AGS has huge potential to be developed into antibacterial material.

Toxicity of benzethonium chloride and polyhexamethylene guanidine hydrochloride mixtures on Daphnia carinata: synergistic and antagonistic effects at specific ratios

Throughout the coronavirus (COVID-19) pandemic, the sanitizing products benzethonium chloride (BEC) and polyhexamethylene guanidine hydrochloride (PHMG-H) were widely used; however, few studies have investigated their combined toxicity to organisms. In the present study, acute toxicity and genotoxicity of BEC, PHMG-H, and the combination of the two were investigated as endpoints using Daphnia carinata as the model organism. For individual reagents, PHMG-H was found to be more toxic than BEC in terms of both mortality and genotoxicity. DNA damage and survival rate were used as toxicity endpoints. The interaction was evaluated with the concentration addition (CA) model via toxic unit (TU) approach and additive index (AI) method in mixtures at different ratios in TU. Only the binary mixture BEC + PHMG-H at the ratio 1:9 in TU was regarded as synergistic, while all others indicated increased antagonistic effects as the proportion of BEC increased over the PHMG-H concentration. The findings here benefit understanding surrounding precisely how BEC and PHMG-H interact at different mixing ratios, and can assist with the evaluation of risk assessments for binary mixtures in aquatic ecosystems.

Environmentally Friendly and Broad-Spectrum Antibacterial Poly(hexamethylene guanidine)-Modified Polypropylene and Its Antifouling Application

Biological fouling is one of the main reasons that limits the application of traditional polypropylene (PP) fishing nets in aquaculture. Here, a new environmentally friendly and broad-spectrum antibacterial agent called cationic poly(hexamethylene guanidine) (PHMG) was grafted onto PP molecular chains via permanent chemical bonding to inhibit the biological fouling. The antibacterial monofilaments were obtained by blending different contents of PP-g-PHMG with PP by melt spinning. FTIR results found PHMG to be stably present in the mixed monofilaments after high-temperature melt spinning molding. The crystallinity, relaxation behavior, mechanical properties, water absorptivity, and antibacterial and antifouling efficiencies of the PP-g-PHMG/PP blends were strongly dependent on PP-g-PHMG. The crystallinity increased with increasing PP-g-PHMG content. Adding PP-g-PHMG improved the breaking strength, knotting strength, and elongation at the break for all ratios of PP-g-PHMG/PP blends. However, the water absorption caused by PHMG is low, ranging between 2.48% and 3.45% for the PP-g-PHMG/PP monofilaments. The monofilaments showed excellent nonleaching antimicrobial activities against Staphylococcus aureus and Escherichia coli. The electrostatic adsorption of the negatively charged bacteria and the destruction of their cell membrane allowed the growth inhibition to reach 99.69% with a PP-g-PHMG content of 40%. The marine fish farming experiment also showed a long-term antifouling effect.

A Straightforward Approach towards Antibacterial and Anti-Inflammatory Multifunctional Nanofiber Membranes with Sustained Drug Release Profiles

Preventing bacterial infection and controlling the inflammatory response occupy important positions in wound treatment. Although loading wound dressings with antibacterial or anti-inflammatory drugs/molecules is an effective approach to address these issues, simultaneous sustained release of these drugs remains challenging. Herein, hydrophilic polyhexamethylene guanidine hydrochloride (PHGC) and hydrophobic indomethacin (Indo) are loaded in hydrophilic polyvinyl alcohol (PVA) and hydrophobic polycaprolactone (PCL) nanofibers respectively by bidirectional electrospinning to form an antibacterial and anti-inflammatory PCL-Indo/PVA-PHGC wound dressing. The fabricated nanofiber membrane exhibits 100% disinfection activity to both Gram-negative (E. coli) and Gram-positive (S. aureus) bacteria because of the release of the broad-spectrum antibacterial molecule PHGC. Additionally, the loading of Indo in the nanofiber membrane enhances the expression level of IL-10, while inhibiting those of IL-6 and TNF-α in the RAW264.7 mouse cells. In the interwoven membrane of PCL and PVA fibers, the release of hydrophobic Indo is hindered by hydrophilic PHGC and PVA fibers, and similarly, the release of hydrophilic PHGC is hindered by hydrophobic Indo and PCL fibers. In conclusion, the PCL-Indo/PVA-PHGC nanofiber membrane has excellent antibacterial, anti-inflammatory, and sustained-release effects, and thus regulates the immune microenvironment of the cells to potentially promote wound healing.

Antibacterial Mechanism of N-PMI and the Characteristics of PMMA-Co-N-PMI Copolymer

Aiming at the excellent killing effect of N-phenylmaleimide (N-PMI) on microorganisms, this article used structural simulation analysis, fluorescence analysis, confocal laser scanning microscope and SEM to find that the double bond in N-PMI could interact with the sulfur groups in the membrane protein, changing its conformation, rupturing the plasma membrane of the cell, leaking the contents, and ultimately causing the death of the microorganisms. Therefore, once the double bond participated in the polymerization, N-PMI lost its antimicrobial function. N-PMI could achieve azeotropic copolymerization with MMA through reactive extrusion polymerization. N-PMI with a content of 5 % can be evenly inserted into the PMMA chain segment during the copolymerization reaction, thereby increasing the Tg of pure PMMA by up to 15 °C, which provided the PMMA-co-PMI copolymer with resistance to boiling water sterilization advantageous conditions. In addition, N-PMI with a content of 5 % has little effect on the transparency of PMMA after participating in the copolymerization. Moreover, the trace amount of residual N-PMI made the material have excellent antimicrobial function, and the bacteriostatic zone is extremely small, which provided an excellent guarantee for the safety and durability of the material. As a medical biological material, the PMMA-co-PMI copolymer has a good industrialization application prospects.

Synergistic Inhibition of Plantaricin E/F and Lactic Acid Against Aeromonas hydrophila LPL-1 Reveals the Novel Potential of Class IIb Bacteriocin

Plantaricin E/F (PlnEF) is a pair of two-component class IIb bacteriocin produced by lactic acid bacteria. PlnEF commonly displays potent antimicrobial activity against certain Gram-positive organisms. In this study, we investigated the synergistic activity of PlnEF combined with lactic acid against Gram-negative food and aquaculture potential pathogen Aeromonas hydrophila LPL-1, which is naturally resistant to PlnEF. We applied SDS-PAGE, wavelength-scanning, laser confocal microscopy, flow cytometer, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and two-dimensional electrophoresis to investigate their synergistic inhibitory activities. The results showed that L-lactic acid drove the release of LPS from A. hydrophila, making it possible for PlnEF to contact the inner cell membrane of A. hydrophila. Besides, co-treatment of lactic acid and PlnEF caused severe morphological and intracellular changes of A. hydrophila, including blebs on the cell surface, abnormal cell elongation, inner membrane disruption, pore-forming through the outer and inner membrane, coagulation of the cytoplasm, and structural transformation of DNA. Protein profile analysis revealed that combined treatment of lactic acid and PlnEF inhibited the energy metabolism, protein synthesis, protein folding, and DNA replication in A. hydrophila. These findings proved that PlnEF combined with lactic acid was efficient against A. hydrophila and shed light on bacteriocin’s potential and a new inhibition mechanism against A. hydrophila.

Physicochemical and biological properties of experimental dental adhesives doped with a guanidine-based polymer: an in vitro study

OBJECTIVES

The objective of this study is to formulate experimental dental adhesives with different polyhexamethylene guanidine hydrochloride concentrations (PHMGH) and evaluate their physical, chemical, and biological properties.

MATERIALS AND METHODS

The experimental adhesives were formulated with 0 (control, G_CTRL), 0.5 (G_0.5%), 1 (G_1%), or 2 (G_2%) wt.% into the adhesive. The adhesives were analyzed for degree of conversion (DC%), softening in solvent (ΔKHN%), ultimate tensile strength (UTS), microtensile bond strength (μTBS) immediately and after 1 year of aging, antibacterial activity, and cytotoxicity.

RESULTS

There were no differences among groups for DC%, ΔKHN%, and UTS (p > 0.05%). There were no differences between each PHMGH-doped adhesive compared to G_CTRL in the immediate μ-TBS (p > 0.05). Adhesives with at least 1 wt.% of PHMGH presented better stability of μ-TBS. PHMGH-doped adhesives showed improved longitudinal μ-TBS compared to G_CTRL (p < 0.05). Lower Streptococcus mutans biofilm formation was observed for PHMGH-doped adhesives (p < 0.05). There was lower viability of planktonic S. mutans in the media in contact with the samples when at least 1 wt.% of PHGMGH was incorporated (p < 0.05). The formulated adhesives showed no cytotoxicity against pulp cells (p > 0.05).

CONCLUSIONS

The adhesive with 2 wt.% of PHMGH showed the highest antibacterial activity, without affecting the physicochemical properties and cytotoxicity, besides conferring stability for the dental adhesion.

CLINICAL RELEVANCE

PHMGH, a positively charged polymer, conveyed antibacterial activity to dental adhesives. Furthermore, it did not negatively affect the essential physicochemical and biocompatibility properties of the adhesives. More importantly, the incorporation of PHMGH provided stability for the μ-TBS compared to the control group without this additive.

eDNA Inactivation and Biofilm Inhibition by the PolymericBiocide Polyhexamethylene Guanidine Hydrochloride (PHMG-Cl)

The choice of effective biocides used for routine hospital practice should consider the role of disinfectants in the maintenance and development of local resistome and how they might affect antibiotic resistance gene transfer within the hospital microbial population. Currently, there is little understanding of how different biocides contribute to eDNA release that may contribute to gene transfer and subsequent environmental retention. Here, we investigated how different biocides affect the release of eDNA from mature biofilms of two opportunistic model strains Pseudomonas aeruginosa ATCC 27853 (PA) and Staphylococcus aureus ATCC 25923 (SA) and contribute to the hospital resistome in the form of surface and water contaminants and dust particles. The effect of four groups of biocides, alcohols, hydrogen peroxide, quaternary ammonium compounds, and the polymeric biocide polyhexamethylene guanidine hydrochloride (PHMG-Cl), was evaluated using PA and SA biofilms. Most biocides, except for PHMG-Cl and 70% ethanol, caused substantial eDNA release, and PHMG-Cl was found to block biofilm development when used at concentrations of 0.5% and 0.1%. This might be associated with the formation of DNA–PHMG-Cl complexes as PHMG-Cl is predicted to bind to AT base pairs by molecular docking assays. PHMG-Cl was found to bind high-molecular DNA and plasmid DNA and continued to inactivate DNA on surfaces even after 4 weeks. PHMG-Cl also effectively inactivated biofilm-associated antibiotic resistance gene eDNA released by a pan-drug-resistant Klebsiella strain, which demonstrates the potential of a polymeric biocide as a new surface-active agent to combat the spread of antibiotic resistance in hospital settings.

A natural polysaccharide-based antibacterial functionalization strategy for liquid and air filtration membranes

Filtration membranes are widely applied in medical fields. However, these membranes are challenged by bacterial contamination in hospitals, which increases the risk of nosocomial infections. Thus, it is significant to develop antibacterial filtration membranes. In this work, an oxidated dextran (ODex)-based antibacterial coating was designed and constructed on microfiltration (MF) membranes and melt-blown fabrics. Polyhexamethylene guanidine (PHMG) was synthesized as an antibacterial agent, and was fixed by ODex onto filtration membranes. The functionalized MF membranes increased the filtration efficiency for E. coli from 20.9% to 99.9%, and improved the absorption ratio for endotoxin by 59.1%, while the water flow rate still remained as high as 5255 L (h m²)^-1. Furthermore, the trapped bacteria were inactivated by the antibacterial coating. For the melt-blown fabrics, the aerosol filtration efficiency was increased from 74.6% to 81.0%, and the antibacterial efficiency was promoted to 92.0%. The present work developed a facile and universal antibacterial functionalization strategy for filtration membranes, which provided a new method for the design and development of various novel antibacterial filtration materials in the medical field.

Polyguanidine-modified adsorbent to enhance marine applicability for uranium recovery from seawater

The marine applicability of adsorbents intended for recovering uranium from seawater is crucial. For such applicability, the materials must exhibit anti-biofouling properties, seawater pH adaptability (pH~8), and salt tolerance. Extracting uranium from seawater is a long-term project; hence, biofouling, high salt concentrations, and weak alkaline environments negatively affect the adsorption of uranium and damage the recovered materials. Most studies on the extraction of uranium from seawater focus on increasing the adsorption capacity of the employed adsorbent, while its marine applicability is neglected. In the present study, three types of guanidine polymer (GP)-modified acrylic fibers were prepared to investigate the impact of the introduced structure on the marine applicability of the fibers. After screening, the introduction of polyhexamethylene biguanidine (PHMB) is observed to produce PAO-PHMB-A, characterized by excellent marine applicability. The enhanced properties include high antimicrobial activity (10⁹ CFU/mL, 99.71%), good salt tolerance, and optimal adsorption at a pH of 8. Owing to the synergistic effect of its functional groups, the PAO-PHMB-A material exhibits excellent adsorption performance (525.89 mg/g), as well as high selectivity and durability. More importantly, long-term marine tests revealed that PAO-PHMB-A shows a remarkable uranium adsorption capacity (30 d, 3.19 mg/g) and excellent antibacterial activity. Considering its excellent marine applicability and good adsorption performance, the PAO-PHMB-A material developed in this work could serve as a potential adsorbent for engineering applications associated with uranium recovery from seawater.

Characteristics of the Molecular Weight of Polyhexamethylene Guanidine (PHMG) Used as a Household Humidifier Disinfectant

(1) Background: Household humidifier disinfectant (HD) brands containing polyhexamethylene guanidine (PHMG) have been found to cause the most HD-associated lung injuries (HDLIs) in the Republic of Korea. Nevertheless, no study has attempted to characterize the potential association of the health effects, including HDLI, with the physicochemical properties of PHMG dissolved in different HD brands. This study aimed to characterize the molecular weight (MW) distribution, the number-average molecular weight (M_n), the weight-average molecular weight (M_w), and the structural types of PHMG used in HD products. (2) Methods: Quantitative measurements were made using matrix-assisted laser desorption/ionization–time-of-flight mass spectrometry (MALDI-TOF MS). The M_n, M_w, and MW distributions were compared among various HD products. (3) Results: The mean M_n and M_w were 542.4 g/mol (range: 403.0–692.2 g/mol) and 560.7 g/mol (range: 424.0–714.70 g/mol), respectively. The degree of PHMG oligomerization ranged from 3 to 7. The MW distribution of PHMG indicated oligomeric compounds regardless of the HD brands. (4) Conclusions: Based on the molecular weight distribution, the average molecular weight of PHMG, and the degree of polymerization, the PHMG collected from HDLI victims could be regarded as an oligomer. PHMG, as used in household humidifiers, should not be exempted from toxic chemical registration as a polymer. Further study is necessary to examine the association of PHMG oligomeric compounds and respiratory health effects, including HDLI.

Effect of Cu Nanoparticles on the Properties of PP-g-PHMG/PE Monofilament and Its Antifouling Application

The modified polyethylene monofilament was prepared by melt blending and spinning using polyethylene (PE), polypropylene-grafted poly(hexamethylene guanidine) (PP-g-PHMG), and Cu nanoparticles (CuNPs). The effect of CuNP content on the structure, mechanical properties, and antimicrobial properties of the monofilaments was studied. In addition, the antifouling property of fishing nets using the modified polyethylene monofilaments was evaluated. The results showed that CuNPs were dispersed homogeneously in the monofilament matrix as microaggregates. The initial increase in the tensile strength of monofilament was attributed to the mechanical restraint, whereas a decrease in the tensile properties at 1.0 wt% CuNP content was due to the predominant effect of a decrease in the total crystallinity. A bacteriostatic test showed that the monofilament had an obvious inhibitory effect on Staphylococcus aureus. Furthermore, coupon test results showed that PP-g-PHMG/PE/CuNP nanocomposite netting had lower weight gain than PP-g-PHMG/PE netting (23.6% reduction) because of the combined antibacterial effect of both PHMG and CuNP. Therefore, PP-g-PHMG/PE/CuNP monofilament has the potential to produce green and efficient antifouling fishing nets.

Development of bactericidal spinel ferrite nanoparticles with effective biocompatibility for potential wound healing applications

The current study was devised to explore the antibacterial activity and underlying mechanism of spinel ferrite nanoparticles (NPs) along with their biocompatibility and wound healing potentials. In this regard, nickel ferrite and zinc/nickel ferrite NPs were synthesized via a modified co-precipitation method and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy Energy-dispersive X-ray spectroscopy (EDX). The biocompatibility of the synthesized NPs with human dermal fibroblast (HDF) and red blood cells (RBCs) was assessed. The biocompatible concentrations of the NPs were used to investigate the antimicrobial activity against various pathogenic Gram-negative and Gram-positive bacteria. The mode of bactericidal action was also explored. In vitro scratch assay was performed to evaluate the wound healing potential of NPs. The SEM-EDX analysis showed that the average particles size of nickel ferrite and zinc/nickel ferrite were 49 and 46 nm, respectively, with appropriate elemental composition and homogenous distribution. The XRD pattern showed all the characteristic diffraction peaks of spinel ferrite NPs, which confirmed the synthesis of the pure phase cubic spinel structure. The biocompatible concentration of nickel ferrite and zinc/nickel ferrite NPs was found to be 250 and 125 μg ml-1, respectively. Both the NPs showed inhibition against all the selected strains in the concentration range of 50 to 1000 μg ml-1. Studies on the underlying antimicrobial mechanism revealed damage to the cell membrane, protein leakage, and intracellular reactive oxygen species production. The in vitro scratch assay confirmed the migration and proliferation of fibroblast with artificial wound shrinkage. This study shows that nickel ferrite and zinc/nickel ferrite NPs could be a strong candidate for antibacterial and wound healing nano-drugs.

Synthesis of cationic acrylate copolyvidone-iodine nanoparticles with double active centers and their antibacterial application

Antibacterial materials are rapidly emerging as a primary component in the mitigation of bacterial pathogens, and functional polymers play a vital role in the preparation of antibacterial coatings. In this study, a novel antibacterial polymer with double active centers was synthesized. Firstly, using one-pot soap-free emulsion polymerization technology, the cationic acrylate copolymeric polyvidone (CACPV) was synthesized by copolymerization of four monomers with different functions, which were methyl methacrylate (MMA), N-vinyl-2-pyrrolidone (NVP), γ-methacryloxypropyltrimethoxysilane (MAPTS) and [3-(methacryloylamino)propyl]trimethylammonium chloride (MAPTAC). Secondly, using iodine complexation, the cationic acrylate copolyvidone-iodine (CACPVI) nanoparticles were prepared. After being characterized by scanning electron microscopy (SEM), dynamic light scattering (DLS), X-ray photoelectron spectroscopy (XPS) and contact angle test, the antibacterial activity of CACPVI was evaluated against the typical human pathogens Escherichia coli (E. coli, Gram-negative) and Staphylococcus aureus (S. aureus, Gram-positive). Additionally, CACPVI was used to improve the antibacterial activities of some materials, such as ink, dye and coatings. It was found that CACPVI presented an excellent antibacterial synergy. When the antibacterial activities were more than 99% at a concentration of 40.00 μg mL-1, CACPVI exhibited long-term antibacterial performance as expected. The antibacterial mechanism of this synergy was also investigated. In summary, a novel antibacterial polymer material with double active centers was successfully synthesized and was widely applied in coating, dye and ink materials for minimizing bacterial infection.

TGFβ/Smad mediated the polyhexamethyleneguanide areosol-induced irreversible pulmonary fibrosis in subchronic inhalation exposure

AIM

Polyhexamethylene guanidine (PHMG) is widely used as a disinfectant with broad spectra of bactericidal activity and low oral toxicity. However, inhalation of PHMG can cause pulmonary injury and severe pulmonary fibrosis. The mechanism underlying PHMG aerosol induced pulmonary fibrosis remains unclear. In this study, we aimed to examine the subchronic lung injury and determine potential cytokines involved in PHMG aerosol induced fibrosis.

METHODS

C57BL/6N mice were exposed to 1.03 mg/m³ PHMG through aerosol inhalation for 3 weeks, or 3 weeks followed by other 3 weeks recovery.

RESULTS

The results indicated that the expression of transforming growth factor-beta1 (TGF-β1) and extracellular matrix remodeling markers were up-regulated in the PHMG-treated mice and these parameters were aggravated after 3 weeks recovery. Bronchoalveolar lavage fluids (BALFs) analysis showed that the number of total cells was significantly decreased in exposure group. The percentage of macrophages in BALFs decreased significantly whereas the percentage of neutrophils and lymphocytes increased. Extensive collagen deposition was observed in the peribronchiolar and interstitial areas in the PHMG exposed lungs.

CONCLUSION

In conclusion, even low-does PHMG aerosol exposure could induce mice pulmonary local inflammation and irreversible fibrosis. In addition, TGF-β/Smad signaling pathway mediated the extracellular matrix remodeling involved in the development of pulmonary fibrosis.

A copper-specific microbial fuel cell biosensor based on riboflavin biosynthesis of engineered Escherichia coli

Copper pollution poses a serious threat to the aquatic environment; however, in situ analytical methods for copper monitoring are still scarce. In the current study, Escherichia coli Rosetta was genetically modified to express OprF and ribB with promoter P_t7 and P_cusC , respectively, which could synthesize porin and senses Cu²⁺ to produce riboflavin. The cell membrane permeability of this engineered strain was increased and its riboflavin production (1.45-3.56 μM) was positively correlated to Cu²⁺ (0-0.5 mM). The biosynthetic strain was then employed in microbial fuel cell (MFC) based biosensor. Under optimal operating parameters of pH 7.1 and 37°C, the maximum voltage (248, 295, 333, 352, and 407 mV) of the constructed MFC biosensor showed a linear correlation with Cu²⁺ concentration (0.1, 0.2, 0.3, 0.4, 0.5 mM, respectively; R²  = 0.977). The continuous mode testing demonstrated that the MFC biosensor specifically senses Cu²⁺ with calculated detection limit of 28 μM, which conforms to the common Cu²⁺ safety standard (32 μM). The results obtained with the developed biosensor system were consistent with the existing analytical methods such as colorimetry, flame atomic absorption spectrometry, and inductively coupled plasma optical emission spectrometry. In conclusion, this MFC-based biosensor overcomes the signal conversion and transmission problems of conventional approaches, providing a fast and economic analytical alternative for in situ monitoring of Cu²⁺ in water.

In Vitro and In Vivo Evaluation of the Toxic Effects of Dodecylguanidine Hydrochloride

The toxicity profiles of the widely used guanidine-based chemicals have not been fully elucidated. Herein, we evaluated the in vitro and in vivo toxicity of eight guanidine-based chemicals, focusing on inhalation toxicity. Among the eight chemicals, dodecylguanidine hydrochloride (DGH) was found to be the most cytotoxic (IC50: 0.39 μg/mL), as determined by the water soluble tetrazolium salts (WST) assay. An acute inhalation study for DGH was conducted using Sprague-Dawley rats at 8.6 ± 0.41, 21.3 ± 0.83, 68.0 ± 3.46 mg/m3 for low, middle, and high exposure groups, respectively. The levels of lactate dehydrogenase, polymorphonuclear leukocytes, and cytokines (MIP-2, TGF-β1, IL-1β, TNF-α, and IL-6) in the bronchoalveolar lavage fluid increased in a concentration-dependent manner. Histopathological examination revealed acute inflammation with necrosis in the nasal cavity and inflammation around terminal bronchioles and alveolar ducts in the lungs after DGH inhalation. The LC50 of DGH in rats after exposure for 4 h was estimated to be >68 mg/m3. Results from the inhalation studies showed that DGH was more toxic in male rats than in female rats. Overall, DGH was found to be the most cytotoxic chemical among guanidine-based chemicals. Exposure to aerosols of DGH could induce harmful pulmonary effects on human health.

Properties of Polyhexamethylene Guanidine (PHMG) Associated with Fatal Lung Injury in Korea

The use of humidifier disinfectant (HD) has been determined to be associated with lung injuries (HDLI) in Korea. Although HD brands containing polyhexamethylene guanidine (PHMG) oligomers have been found to cause more HDLI compared to brands containing other disinfectants, the physicochemical properties of PHMG have been poorly defined. We aimed to quantify the PHMG dissolved in HD brands, characterize the number-average (Mn) and weight-average (Mw) molecular masses, and identify the polymerization degree of PHMG. Analysis of the PHMG oligomers was performed using a matrix-assisted laser desorption/ionization time-of-flight mass spectrometer (MALDI-TOF MS) operated in positive-ion reflectron mode. Eight brands of HD containing PHMG were identified. The PHMG concentrations in these brands ranged from 160 to 37,200 ppm (mean = 3100.9 ppm). Concentration was a significant variable among and within HD brands. The degree of PHMG oligomerization fell within the range of two to four. The averages of Mn and Mw were 517.2 g/mol (range: 422-613 g/mol) and 537.3 g/mol (range: 441.0-678.0 g/mol), respectively. Based on the average molecular weight and the degree of polymerization, the PHMG examined here could be regarded as oligomers, which may be associated with the highest proportion of HDLI being caused by PHMG.

Synthesis and antimicrobial properties of new chitosan derivatives containing guanidinium groups

New chitosan derivatives bearing guanidinium functions were synthesized following different synthesis strategies. N-guanidinium chitosan acetate and N-guanidinium chitosan chloride were synthesized by direct reaction between chitosan and cyanamide in the presence of scandium(III) triflate. The synthesis of N-guanidinium chitosan (N,N'-dicyclohexyl) chloride and N-guanidinium chitosan (N-(3-dimethylaminopropyl)-N'-ethyl hydrochloride) chloride involved the reaction of chitosan with carbodiimides in ionic liquid. The chitosan derivatives were characterized by analytical techniques including ¹³C solid state NMR, FT-IR spectroscopies, thermogravimetry and elemental analysis. The antimicrobial properties of chitosan and the new derivatives were investigated using the minimal inhibitory concentration (MIC) technique. All new guanylated chitosan derivatives displayed high antimicrobial activity in comparison with neat chitosan. The N-guanidinium chitosan acetate reduced the time required for killing to half in comparison with chitosan and recorded MIC values less than 3.125 mg/mL against all assayed microorganisms. This work opens new perspectives for using chitosan derivatives as antimicrobial surfaces.

Disinfection of Ready-to-Eat Lettuce Using Polyhexamethylene Guanidine Hydrochloride

As a novel and safe sanitizer, polyhexamethylene guanidine hydrochloride (PHMG) has been used to inhibit the spoilage of agricultural products caused by fungi. However, little is known about its antibacterial effects on vegetables. In this study, we evaluated the disinfection efficacy of PHMG on ready-to-eat lettuce. PHMG (150-200 mg/L) treatment for 5 min was optimal for lettuce disinfection. Compared to several household sanitizers (vinegar: 1% acetic acid; kettle descaler: 1% citric acid; "84" disinfectant: 200 mg/L sodium hypochlorite), PHMG showed the greatest reductions in Escherichia coli O157:H7, Listeria monocytogenes, aerobic mesophilic counts, aerobic psychrotrophic counts and molds and yeasts. Quality analysis of color (as determined by L*, a* and b*) and determination of electrolyte leakage indicated that PHMG did not cause any additional quality loss as compared to other household sanitizers. These results provide a reference for the application of PHMG as a vegetable sanitizer at the ready-to-eat stage.

Physical and biological properties of a novel root canal sealer modified by polyhexamethylene guanidine

The key of the root canal therapy is to eliminate the micro-organism infection, fill the root canal tightly and reduce the stimulation to the periapical tissues. However, it is quite difficult to meet all the conditions due to the defect of the material. Here we develop a novel root canal sealer (MZOE), in which zinc oxide eugenol (ZOE) were fabricated with polyhexamethylene guanidine (PHMG), and the PHMG's concentration is 0.8, 1.0, 1.2 and 1.4%. Our investigation tested its physical properties, antibacterial effect to E. faecalis, C. albicans, E. coli, S. aureus and cytotoxicity to human periodontal ligament fibroblasts (HPDLFs). The physical properties of the MZOE conformed to the ISO 6876:2001, and its antibacterial effect was stronger than ZOE (p<0.05), the RGR of HPDLFs was tested between 1 to 24%, belonging to moderate cytotoxicity. It was suggested that MZOE had good physical properties, high antibacterial effect, and moderate cytotoxicity.

Combination of polyhexamethylene guanidine hydrochloride and potassium peroxymonosulfate to disinfect ready-to-eat lettuce

There is increasing demand for improved fresh produce disinfection technology during the ready-to-eat stage, especially in low-income developing countries. We previously reported that polyhexamethylene guanidine hydrochloride (PHMG) is an effective sanitizer using fresh-cut lettuce as a model. As a low-cost alternative, in the present study, we examined the disinfection efficacy of combining PHMG with the oxidizing sanitizer potassium peroxymonosulfate (PMS). PHMG (150 mg L⁻¹) reduced the counts of Escherichia coli O157:H7, non-O157 E. coli, Listeria monocytogenes, Salmonella typhimurium, and naturally present microbes on ready-to-eat lettuce. The disinfection efficacy of PMS was significantly lower than that of PHMG; however, the efficacy of their combination (100 mg L⁻¹ PHMG + 50 mg L⁻¹ PMS, 50 mg L⁻¹ PHMG + 100 mg L⁻¹ PMS, and 50 mg L⁻¹ PHMG + 50 mg L⁻¹ PMS) was equivalent to that of PHMG alone. Color and sensory analyses (crispness, color, flavour, and off-odor) indicated that the combination of PHMG and PMS will not lead to additional quality loss when compared with tap water treatment, and electrolyte leakage analysis showed no additional lettuce surface damage of the combination when compared with PHMG-only treatment. These results show that partial replacement of PHMG by PMS is a cost-reducing strategy, providing a theoretical foundation for its practical application.

Combination of polyhexamethylene guanidine hydrochloride and potassium peroxymonosulfate can achieve consistent disinfection effects as those obtained with polyhexamethylene guanidine hydrochloride but at a lower cost.

Humidifier disinfectant and use characteristics associated with lung injury in Korea

Since around the year 2000, hundreds of people in Korea have developed humidifier disinfectant-associated lung injury (HDLI). We collected all HD exposure-related information from the field investigations into the locations in which the 1199 registered patients had used HD. Among the people who registered, 38% (1st round = 214, 2nd = 73, 3rd = 166) were confirmed as HDLI patients. Children aged under eight years old made up the highest proportion of HDLI cases (N = 279, 62%), followed by pregnant women (N = 31, 7%). One hundred thirty-three (29%) of the confirmed HDLI patients died. Fifty-seven percent of HDLI patients (N = 259) developed HDLI after <1 year of HD use. The number of HDLI patients who used only the Oxy Saksak HD brand was found to be 176 (39%), followed by the brands Cefu (N = 27, 6%) and Aekyung (N = 22, 5%). HD products containing only polyhexamethylene guanidine phosphate (PHMG-P) were the most frequently used among HDLI patients (N = 234, 52%), followed by oligo (2-(2-ethoxy)ethoxyethyl) guanidinium (PGH) (N = 27, 6%) and a mixture of chloromethylisothiazolinone (CMIT) and methylisothiazolinone (MIT) (N = 26, 6%). The average PHMG-P inhalation level estimated from the patient group classified as suffering lung injury definitely associated with HD use was 145.1 μg/m³ (N = 91, SD = 395.1 μg/m³ ), higher than levels estimated from both the probable and possible HDLI patient groups. In conclusion, HD exposure-related variables, including type of HD brand and estimated inhalation HD level, were associated with the risk of HDLI.

Cationic Polymers with Tailored Structures for Rendering Polysaccharide-Based Materials Antimicrobial: An Overview

Antimicrobial polymers have attracted substantial interest due to high demands on improving the health of human beings via reducing the infection caused by various bacteria. The review presented herein focuses on rendering polysaccharides, mainly cellulosic-based materials and starch to some extent, antimicrobial via incorporating cationic polymers, guanidine-based types in particular. Extensive review on synthetic antimicrobial materials or plastic/textile has been given in the past. However, few review reports have been presented on antimicrobial polysaccharide, cellulosic-based materials, or paper packaging, especially. The current review fills the gap between synthetic materials and natural polysaccharides (cellulose, starch, and cyclodextrin) as substrates or functional additives for different applications. Among various antimicrobial polymers, particular attention in this review is paid to guanidine-based polymers and their derivatives, including copolymers, star polymer, and nanoparticles with core-shell structures. The review has also been extended to gemini surfactants and polymers. Cationic polymers with tailored structures can be incorporated into various products via surface grafting, wet-end addition, blending, or reactive extrusion, effectively addressing the dilemma of improving substrate properties and bacterial growth. Moreover, the pre-commercial trial conducted successfully for making antimicrobial paper packaging has also been addressed.

Membrane action of polyhexamethylene guanidine hydrochloride revealed on smooth muscle cells, nerve tissue and rat blood platelets: A biocide driven pore-formation in phospholipid bilayers

A well-known cationic biocide of guanidine polymer family, polyhexamethylene guanidine hydrochloride (PHMG) has been tested against smooth muscle cells isolated from swine myometrium, synaptosomes of rat brain nerve terminals and rat blood platelets for the membrane action. It was established that PHMG blocked the activity of Na⁺,K⁺-ATPase of smooth muscle cells plasma membrane by 82.2 ± 0.9% at a concentration of 7 ppm, whilst a dose-dependent depolarization of synaptosomes and platelets became appreciable at 100-500 ppm. Comparative studies by the methods of mass spectrometry (MALDI-TOF and PDMS-TOF), viscosimetry, dynamic light scattering and model phospholipid membranes revealed PHMG oligomers with various number of repeat units (8-16) that formed K⁺-selective potential-dependent pores in sterol-free phosphatidylethanolamine-containing phospholipid bilayers at a concentration of 1 ppm. Obtained results suggest that besides acidic lipids and membrane proteins phosphatidylethanolamine and cholesterol are the other major factors responsible for the differences between PHMG-induced plasma membrane depolarization of microbial and eukaryotic cells and thus, diverse modes of PHMG membrane action.

In vitro Susceptibility and Evaluation of Techniques for Understanding the Mode of Action of a Promising Non-antibiotic Citrus Fruit Extract Against Several Pathogens

The screening for alternatives to antibiotics is an urgent need for the pharmaceutical industry. One of these alternatives seems to be the citrus fruit extracts, which are showing a significant antibacterial activity against Gram-negative and Gram-positive bacteria. One of these citrus extracts, named BIOCITRO®, is assessed in this study to elucidate its bacteriostatic and bactericidal effect and its mode of action on the important pathogens Campylobacter coli, C. jejuni, Escherichia coli, Salmonella enterica ssp. enterica, Clostridium difficile, C. perfringens, and Staphylococcus aureus. For most of the strains tested of these bacteria the product was bactericidal as well as bacteriostatic at the same concentration, and the minimum bactericidal concentrations ranged from 16 to 256 μg/mL. Regarding the mode of action, important changes in the permeability, structure, composition and morphology of the bacterial envelope were evidenced using flow cytometry, Fourier transform infrared spectroscopy and scanning electron microscopy. The main effect of the product was found over carbohydrates and polysaccharides, inducing the release of microvesicles by the cells in addition to other specific effects. During the study, the techniques used were evaluated to clarify their contribution to the knowledge of the mode of action of the product. The survival test elucidated whether the modifications displayed using other techniques affected the viability of the cells or on the contrary, the cells remained viable even with evident changes in their structure, composition or morphology. Flow cytometry showed that for some strains the proportion of cells detected with altered membrane permeability were higher than the number of non-viable cells, and therefore the damage did not affect the viability of some cells. On the contrary, some cells observed using scanning electron microscopy with no apparent damage, were demonstrated non-viable using the survival test, making this technique indispensable in studies of the mode of action of antimicrobials to make a correct interpretation of the data from other techniques.

Antibacterial, chemical and physical properties of sealants with polyhexamethylene guanidine hydrochloride

The aim of this study was to evaluate the influence of polyhexamethylene guanidine hydrochloride (PHMGH) in the physico-chemical properties and antibacterial activity of an experimental resin sealant. An experimental resin sealant was formulated with 60 wt.% of bisphenol A glycol dimethacrylate and 40 wt.% of triethylene glycol dimethacrylate with a photoinitiator/co-initiator system. PHMGH was added at 0.5 (G0.5%), 1 (G1%), and 2 (G2%) wt.% and one group remained without PHMGH, used as control (GCTRL). The resin sealants were analyzed for degree of conversion (DC), Knoop hardness (KHN), and softening in solvent (ΔKHN), ultimate tensile strength (UTS), contact angle (θ) with water or α-bromonaphthalene, surface free energy (SFE), and antibacterial activity against Streptococcus mutans for biofilm formation and planktonic bacteria. There was no significant difference for DC (p > 0.05). The initial Knoop hardness ranged from 17.30 (±0.50) to 19.50 (± 0.45), with lower value for GCTRL (p < 0.05). All groups presented lower KHN after immersion in solvent (p < 0.05). The ΔKHN ranged from 47.22 (± 4.30) to 57.22 (± 5.42)%, without significant difference (p > 0.05). The UTS ranged from 54.72 (± 11.05) MPa to 60.46 (± 6.50) MPa, with lower value for G2% (p < 0.05). PHMGH groups presented no significant difference compared to GCTRL in θ (p > 0.05). G2% showed no difference in SFE compared to GCTRL (p > 0.05). The groups with PHMGH presented antibacterial activity against biofilm and planktonic bacteria, with higher antibacterial activity for higher PHMGH incorporation (p < 0.05). PHMGH provided antibacterial activity for all resin sealant groups and the addition up to 1 wt.% showed reliable physico-chemical properties, maintaining the caries-protective effect of the resin sealant over time.

Novel Methods for Efficacy Testing of Disinfectants – Part I

The pathogens which are the effective transmitters of various infections pose a serious problem in restraining their interference in maintaining a sterile environment. The practical applicability of traditional methods of disinfection is restricted due to their cumbersomeness, toxic product generation, and cost-effectiveness. Therefore, the objective of the current review is to elaborate the efficacies and limitations of various novel disinfectants that can show their activity in a few minutes of treatment. The expected outcome would be feasibility for selection of a favorable disinfectant through various technologies that can generate uniform results and form a basis for the true estimation required parameters. Hence, the current paper ends with the consideration of unique new techniques that distinguishes their simplicity, safety, and efficacy in generating a sterile environment.

Antibiofilm Activity of Polyamide 11 Modified with Thermally Stable Polymeric Biocide Polyhexamethylene Guanidine 2-Naphtalenesulfonate

The choice of efficient antimicrobial additives for polyamide resins is very difficult because of their high processing temperatures of up to 300 °C. In this study, a new, thermally stable polymeric biocide, polyhexamethylene guanidine 2-naphtalenesulfonate (PHMG-NS), was synthesised. According to thermogravimetric analysis, PHMG-NS has a thermal degradation point of 357 °C, confirming its potential use in joint melt processing with polyamide resins. Polyamide 11 (PA-11) films containing 5, 7 and 10 wt% of PHMG-NS were prepared by compression molding and subsequently characterised by FTIR spectroscopy. The surface properties were evaluated both by contact angle, and contactless induction. The incorporation of 10 wt% of PHMG-NS into PA-11 films was found to increase the positive surface charge density by almost two orders of magnitude. PA-11/PHMG-NS composites were found to have a thermal decomposition point at about 400 °C. Mechanical testing showed no change of the tensile strength of polyamide films containing PHMG-NS up to 7 wt%. Antibiofilm activity against the opportunistic bacteria Staphylococcus aureus and Escherichia coli was demonstrated for films containing 7 or 10 wt% of PHMG-NS, through a local biocide effect possibly based on an influence on the bacterial eDNA. The biocide hardly leached from the PA-11 matrix into water, at a rate of less than 1% from its total content for 21 days.