Biofilm formation in environmental bacteria is influenced by different macromolecules depending on genus and species

The influence of surface materials on microbial biofilm formation in aviation fuel systems

The ability of different microbes to form biofilms on materials found in aviation fuel systems was assessed using both individual isolates and complex microbial communities. Biofilm formation by the Gram-negative bacterium, Pseudomonas putida, the fungus Amorphotheca resinae and the yeast, Candida tropicalis, was influenced by material surface properties although this differed between isolates. Biofilm formation was greatest at the fuel-water interface. The Gram-positive bacterium Rhodococcus erythropolis, in contrast, was able to grow on most surfaces. When a subset of materials was exposed to complex microbial communities, the attached microbial community structure was influenced by surface properties and selected for different genera best able to form biofilms on a specific surface. Distinct sub-populations of Pseudomonads were identified, which favoured growth on aluminium or painted surfaces, with a different subpopulation favouring growth on nitrile.

The Effect of Temperature over the Growth and Biofilm Formation of the Thermotolerant Aspergillus flavus

Aspergillus flavus is a medically relevant fungus, particularly in tropical regions. Although its aflatoxin production and thermotolerance are well documented, its biofilm-forming ability has received less attention, despite being a key factor in the virulence of A. flavus as an opportunistic pathogen, which can significantly impact therapeutic outcomes. To investigate the influence of temperature on the growth and biofilm formation of an A. flavus isolate, we compared it on solid media with the reference strain A. flavus ATCC 22546 and documented morphological changes during conidial germination. We examined biofilm formation in both strains across different temperatures and evaluated the susceptibility of this A. flavus isolate to antifungal agents in both planktonic and biofilm form. Our results showed that the temperature can promote conidiation on solid media. Radial growth was highest at 28 °C, while the conidial count and density were favored at higher temperatures. Moreover, we determined that 37 °C was the optimal temperature for conidial germination and biofilm formation. We described four distinct phases in A. flavus biofilm development-initiation (0-12 h), consolidation (12-24 h), maturation (24-48 h), and dispersion (48-72 h)-with the notable presence of conidial heads at 42 °C. Carbohydrates and proteins constitute the primary components of the extracellular matrix. We observed an abundance of lipid droplets within the hyphae of the MMe18 strain biofilm. The mature biofilms demonstrated reduced susceptibility to amphotericin B and itraconazole, requiring higher inhibitory concentrations for both antifungals compared with their planktonic counterparts.

Identification of fluoroquinolone-resistant Mycobacterium tuberculosis through high-level data fusion of Raman and laser-induced breakdown spectroscopy

Accurate and rapid diagnosis of drug susceptibility of Mycobacterium tuberculosis is crucial for the successful treatment of tuberculosis, a persistent global public health threat. To shorten diagnosis times and enhance accuracy, this study introduces a fusion model combining laser-induced breakdown spectroscopy (LIBS) and Raman spectroscopy. This model offers a rapid and accurate method for diagnosing drug-resistance. LIBS and Raman spectroscopy provide complementary information, enabling accurate identification of drug resistance in tuberculosis. Although individual use of LIBS or Raman spectroscopy achieved approximately 90% accuracy in identifying drug resistance, the fusion model significantly improved identification accuracy to 98.3%. Given the fast measurement capabilities of both techniques, this fusion approach is expected to markedly decrease the time required for diagnosis.

Spectroscopic and Microscopic Characterization of Microbial Biofouling on Aircraft Fuel Tanks

Avoiding microbial contamination and biofilm formation on the surfaces of aircraft fuel tanks is a major challenge in the aviation industry. The inevitable presence of water in fuel systems and nutrients provided by the fuel makes an ideal environment for bacteria, fungi, and yeast to grow. Understanding how microbes grow on different fuel tank materials is the first step to control biofilm formation in aviation fuel systems. In this study, biofilms of Pseudomonas putida, a model Gram-negative bacterium previously found in aircraft fuel tanks, were characterized on aluminum 7075-T6 surfaces, which is an alloy used by the aviation industry due to favorable properties including high strength and fatigue resistance. Scanning electron microscopy (SEM) coupled with energy-dispersive X-ray (EDX) showed that extracellular polymeric substances (EPS) produced by P. putida were important components of biofilms with a likely role in biofilm stability and adhesion to the surfaces. EDX analysis showed that the proportion of phosphorus with respect to nitrogen is higher in the EPS than in the bacterial cells. Additionally, different morphologies in biofilm formation were observed in the fuel phase compared to the water phase. Micro-Fourier transform infrared spectroscopy (micro-FTIR) analysis suggested that phosphoryl and carboxyl functional groups are fundamental for the irreversible attachment between the EPS of bacteria and the aluminum surface, by the formation of hydrogen bonds and inner-sphere complexes between the macromolecules and the aluminum surface. Based on the hypothesis that nucleic acids (particularly DNA) are an important component of EPS in P. putida biofilms, the impact of degrading extracellular DNA was tested. Treatment with the enzyme DNase I affected both water and fuel phase biofilms─with the cell structure disrupted in the aqueous phase, but cells remained attached to the aluminum coupons.

Combined effects of cold and acid on dual-species biofilms of Pseudomonas fluorescens and Listeria monocytogenes under simulated chilled beef processing conditions

Interactions across bacterial species boundaries are usually influenced by environmental stresses, yet little has been evaluated regarding multifactorial stresses on the fate of dual-species biofilm formation in food industry. In this study, the processing conditions of chilled beef were established as a combination of cold and acid stresses (4 °C and pH 5.4), with pH 7.0 or 25 °C serving as the controls, to investigate the interaction of dual-species biofilm between Pseudomonas fluorescens and Listeria monocytogenes. Dual-species biofilms significantly increased biofilm formation at 72 h under the condition of 25°C-pH7.0 and 25°C-pH5.4 (P < 0.05). Compared with mono-species biofilms, the cell numbers of L. monocytogenes in dual-species biofilms were lower at 25 °C (P < 0.05), however, the adherent cells of L. monocytogenes was higher in dual-species biofilms at 4 °C (P < 0.05). Furthermore, the amount of extracellular polysaccharides and proteins secreted by single P. fluorescens biofilms at 4 °C was more than three times than those at 25 °C. The surface-enhanced Raman spectroscopy further profiled the variability of extracellular polymeric substances (EPS) composition. Additionally, RT-qPCR results revealed an upregulation of biofilm-related and genes in co-culture species. It provides valuable insights into the strategies for removing mixed biofilms under diverse stressful conditions in practical food processing.

Biochemical characterization and mercury methylation capacity of Geobacter sulfurreducens biofilms grown in media containing iron hydroxide or fumarate

Geobacter species are common in iron-rich environments and can contribute to formation of methylmercury (MeHg), a neurotoxic compound with high bioaccumulation potential formed as a result of bacterial and archaeal physiological activity. Geobacter sulfurreducens can utilize various electron acceptors for growth including iron hydroxides or fumarate. However, it remains poorly understood how the growth on these compounds affects physiological properties of bacterial cells in biofilms, including the capacity to produce MeHg. The purpose of this study was to determine changes in the biochemical composition of G. sulfurreducens during biofilm cultivation in media containing iron hydroxide or fumarate, and to quantify mercury (Hg) methylation capacity of the formed biofilms. Biofilms were characterized by Fourier-transform infrared spectroscopy in the attenuated total reflection mode (ATR-FTIR), Resonance Raman spectroscopy and confocal laser scanning microscopy. MeHg formation was quantified by mass spectrometry after incubation of biofilms with 100 nM Hg. The results of ATR-FTIR experiments showed that in presence of fumarate, G. sulfurreducens biofilm formation was accompanied by variation in content of the energy-reserve polymer glycogen over time, which could be cancelled by the addition of supplementary nutrients (yeast extract). In contrast, biofilms cultivated on Fe(III) hydroxide did not accumulate glycogen. The ATR-FTIR results further suggested that Fe(III) hydroxide surfaces bind cells via phosphate and carboxylate groups of bacteria that form complexes with iron. Furthermore, biofilms grown on Fe(III) hydroxide had higher fraction of oxidized cytochromes and produced two to three times less biomass compared to conditions with fumarate. Normalized to biofilm volume, the content of MeHg was similar in assays with biofilms grown on Fe(III) hydroxide and on fumarate (with yeast extract and without). These results suggest that G. sulfurreducens biofilms produce MeHg irrespectively from glycogen content and cytochrome redox state in the cells, and warrant further investigation of the mechanisms controlling this process.

Characteristics of Staphylococcus aureus biofilm matured in tryptic soy broth, low-fat milk, or whole milk samples along with inactivation by 405 nm light combined with folic acid

In the present study, the characteristics of Staphylococcus aureus biofilms matured in tryptic soy broth (TSB), low-fat milk, or whole milk samples were identified along with their resistance to 405 nm light with or without folic acid. Phenotypic properties of carbohydrate and protein contents in extracellular polymeric substance (EPS) of S. aureus biofilms matured in different conditions were identified. The carbohydrate content was higher in the biofilm matured in low-fat milk (1.27) than the samples matured in whole milk (0.58) and TSB (0.10). Protein content in the EPS of biofilm was higher in the sample matured in whole milk (6.59) than the samples matured in low-fat milk (3.24) and TSB (2.08). Moreover, the maturation condition had a significant effect on the membrane lipid composition of the biofilm, producing more unsaturated fatty acids in biofilm matured in milk samples. These changes in biofilm matured in milk samples increased the resistance of S. aureus to 405 nm light in the presence of folic acid (LFA). Additionally, transcriptomic analysis was conducted to identify the response of S. aureus biofilm to LFA treatment. Several genes related to DNA and protein protection from oxidative stress along with biofilm accumulation were overexpressed in the LFA-treated biofilms. These results indicate the maturation of S. aureus biofilm in various samples and the biofilms responses to bactericidal treatments.

Micro-fractionation shows microbial community changes in soil particles below 20 μm

Introduction

Micro-scale analysis of microbes in soil is essential to the overall understanding of microbial organization, interactions, and ecosystem functioning. Soil fractionation according to its aggregated structure has been used to access microbial habitats. While bacterial communities have been extensively described, little is known about the fungal communities at scales relevant to microbial interactions.

Methods

We applied a gentle soil fractionation method to preserve stable aggregated structures within the range of micro-aggregates and studied fungal and bacterial communities as well as nitrogen cycling potentials in the pristine Rothamsted Park Grass soil (bulk soil) as well as in its particle size fractions (PSFs; &gt;250 μm, 250–63 μm, 63–20 μm, 20–2 μm, &lt;2 μm, and supernatant).

Results

Overall bacterial and fungal community structures changed in PSFs below 20 μm. The relative abundance of Basidiomycota decreased with decreasing particle size over the entire measure range, while Ascomycota showed an increase and Mucoromycota became more prominent in particles below 20 μm. Bacterial diversity was found highest in the &lt; 2 μm fraction, but only a few taxa were washed-off during the procedure and found in supernatant samples. These taxa have been associated with exopolysaccharide production and biofilm formation (e.g., Pseudomonas, Massilia, Mucilaginibacter, Edaphobaculum, Duganella, Janthinobacterium, and Variovorax). The potential for nitrogen reduction was found elevated in bigger aggregates.

Discussion

The observed changes below 20 μm particle are in line with scales where microbes operate and interact, highlighting the potential to focus on little researched sub-fractions of micro-aggregates. The applied method shows potential for use in studies focusing on the role of microbial biofilms in soil and might also be adapted to research various other soil microbial functions. Technical advances in combination with micro-sampling methods in soil promise valuable output in soil studies when particles below 20 μm are included.

Variable pH and subsequent change in pCO2 modulates the biofilm formation, synthesis of extracellular polymeric substances, and survivability of a marine bacterium Bacillus stercoris GST-03

Biofilm-forming bacteria adhere to the substrates and engage in the nutrient cycling process. However, environmental conditions may interrupt the biofilm formation ability, which ultimately may affect various biogeochemical cycles. The present study reports the effect of varying pH and subsequent change in pCO₂ on the survivability, biofilm formation, and synthesis of extracellular polymeric substances (EPS) of a biofilm-forming marine bacterium Bacillus stercoris GST-03 isolated from the Bhitarkanika mangrove ecosystem, Odisha, India. Understanding the pH-dependent alteration in EPS constituents, and associated functional groups of a marine bacterium will provide better insight into the adaptability of the bacteria in future ocean acidification scenarios. The strain was found to tolerate and form biofilm up to pH 4, with the maximum biofilm formation at pH 6. EPS yield and the synthesis of the key components of the EPS, including carbohydrate, protein, and lipid, were found maximum at pH 6. Changes in biofilm formation patterns and various topological parameters at varying pH/pCO₂ conditions were observed. A cellular chaining pattern was observed at pH 4, and maximum biofilm formation was obtained at pH 6 with biomass of 5.28582 ± 0.5372 μm³/μm² and thickness of 9.982 ± 1.5288 μm. Structural characterization of EPS showed changes in various functional groups of constituent macromolecules with varying pH. The amorphous nature of the EPS and the changes in linkages and associated functional groups (-R₂CHOR, -CH₃, and -CH₂) with pH variation was confirmed. EPS showed a two-step degradation with a maximum weight loss of 59.147% and thermal stability up to 480 °C at pH 6. The present work efficiently demonstrates the role of EPS in providing structural and functional stability to the biofilm in varying pH conditions. The findings will provide a better understanding of the adaptability of marine bacteria in the future effect of ocean acidification.

De novo biosynthesis of p-coumaric acid and caffeic acid from carboxymethyl-cellulose by microbial co-culture strategy

Background

Aromatic compounds, such as p-coumaric acid (p-CA) and caffeic acid, are secondary metabolites of various plants, and are widely used in diet and industry for their biological activities. In addition to expensive and unsustainable methods of plant extraction and chemical synthesis, the strategy for heterologous synthesis of aromatic compounds in microorganisms has received much attention. As the most abundant renewable resource in the world, lignocellulose is an economical and environmentally friendly alternative to edible, high-cost carbon sources such as glucose.

Results

In the present study, carboxymethyl-cellulose (CMC) was utilized as the sole carbon source, and a metabolically engineered Saccharomyces cerevisiae strain SK10-3 was co-cultured with other recombinant S. cerevisiae strains to achieve the bioconversion of value-added products from CMC. By optimizing the inoculation ratio, interval time, and carbon source content, the final titer of p-CA in 30 g/L CMC medium was increased to 71.71 mg/L, which was 155.9-fold higher than that achieved in mono-culture. The de novo biosynthesis of caffeic acid in the CMC medium was also achieved through a three-strain co-cultivation. Caffeic acid production was up to 16.91 mg/L after optimizing the inoculation ratio of these strains.

Conclusion

De novo biosynthesis of p-CA and caffeic acid from lignocellulose through a co-cultivation strategy was achieved for the first time. This study provides favorable support for the biosynthesis of more high value-added products from economical substrates. In addition, the multi-strain co-culture strategy can effectively improve the final titer of the target products, which has high application potential in the field of industrial production.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-022-01805-5.

The Transcription Regulator YgeK Affects Biofilm Formation and Environmental Stress Resistance in Avian Pathogenic Escherichia coli

Simple Summary

Avian pathogenic Escherichia coli (APEC) is the pathogen responsible for colibacillosis in poultry. Transcriptional regulator ygeK has been shown to decrease APEC’s flagellar formation ability, bacterial motility ability, serum sensitivity, and adhesion ability. However, we did not study the effects of ygeK on biofilm formation and environmental stress resistance in APEC. In this study, we investigated ygeK in APEC biofilm formation and bacterial resistance to different environmental stresses. We also analyzed the multi-level regulation of ygeK in APEC and investigated associations between differentially expressed proteins and key ygeK targets. This work provides a basis for further analysis of APEC pathogenesis mechanisms.

Abstract

Avian pathogenic Escherichia coli (APEC) is one of the most common pathogens in poultry and a potential gene source of human extraintestinal pathogenic E. coli (ExPEC), leading to serious economic losses in the poultry industry and public health concerns. Exploring the pathogenic mechanisms underpinning APEC and the identification of new targets for disease prevention and treatment are warranted. YgeK is a transcriptional regulator in APEC and is localized to the type III secretion system 2 of E. coli. In our previous work, the transcription factor ygeK significantly affected APEC flagella formation, bacterial motility, serum sensitivity, adhesion, and virulence. To further explore ygeK functions, we evaluated its influence on APEC biofilm formation and resistance to environmental stress. Our results showed that ygeK inactivation decreased biofilm formation and reduced bacterial resistance to environmental stresses, including acid and oxidative stress. In addition, the multi-level regulation of ygeK in APEC was analyzed using proteomics, and associations between differentially expressed proteins and the key targets of ygeK were investigated. Overall, we identified ygeK’s new function in APEC. These have led us to better understand the transcriptional regulatory ygeK and provide new clues about the pathogenicity of APEC.

Nondestructive 3D imaging and quantification of hydrated biofilm matrix by confocal Raman microscopy coupled with non-negative matrix factorization

Biofilms are ubiquitous in natural and engineered environments and of great importance in drinking water distribution and biological wastewater treatment systems. Simultaneously acquiring the chemical and structural information of the hydrated biofilm matrix is essential for the cognition and regulation of biofilms in the environmental field. However, the complexity of samples and the limited approaches prevent a holistic understanding of the biofilm matrix. In this work, an approach based on the confocal Raman mapping technique integrated with non-negative matrix factorization (NMF) analysis was developed to probe the hydrated biofilm matrix in situ. The flexibility of the NMF analysis was utilized to subtract the undesired water background signal and resolve the meaningful biological components from Raman spectra of the hydrated biofilms. Diverse chemical components such as proteins, bacterial cells, glycolipids and polyhydroxyalkanoates (PHA) were unraveled within the distinct Pseudomonas spp. biofilm matrices, and the corresponding 3-dimensional spatial organization was visualized and quantified. Of these components, glycolipids and PHA were unique to the P. aeruginosa and P. putida biofilm matrix, respectively. Furthermore, their high abundances in the lower region of the biofilm matrix were found to be related to the specific physiological functions and surrounding microenvironments. Overall, the results demonstrate that our NMF Raman mapping method could serve as a powerful tool complementary to the conventional approaches for identifying and visualizing the chemical components in the biofilm matrix. This work may facilitate the online characterization of the biofilm matrix widely present in the environment and advance the fundamental understanding of biofilm.

The Role of Extracellular DNA in Microbial Attachment to Oxidized Silicon Surfaces in the Presence of Ca2+ and Na. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2021;37:9838-9850. [PMID: 34347486 PMCID: PMC8397393 DOI: 10.1021/acs.langmuir.1c01410]

Attachment assays of a Pseudomonas isolate to fused silica slides showed that treatment with DNaseI significantly inhibited cellular adsorption, which was restored upon DNA treatment. These assays confirmed the important role of extracellular DNA (eDNA) adsorption to a surface. To investigate the eDNA adsorption mechanism, single-molecule force spectroscopy (SMFS) was used to measure the adsorption of eDNA to silicon surfaces in the presence of different concentrations of sodium and calcium ions. SMFS reveals that the work of adhesion required to remove calcium-bound eDNA from the silicon oxide surface is substantially greater than that for sodium. Molecular dynamics simulations were also performed, and here, it was shown that the energy gain in eDNA adsorption to a silicon oxide surface in the presence of calcium ions is small and much less than that in the presence of sodium. The simulations show that the length scales involved in eDNA adsorption are less in the presence of sodium ions than those in the presence of calcium. In the presence of calcium, eDNA is pushed above the surface cations, whereas in the presence of sodium ions, short-range interactions with the surface dominate. Moreover, SMFS data show that increasing [Ca2+] from 1 to 10 mM increases the adsorption of the cations to the silicon oxide surface and consequently enhances the Stern layer, which in turn increases the length scale associated with eDNA adsorption.

Analysis of Pathogenic Bacterial and Yeast Biofilms Using the Combination of Synchrotron ATR-FTIR Microspectroscopy and Chemometric Approaches

Biofilms are assemblages of microbial cells, extracellular polymeric substances (EPS), and other components extracted from the environment in which they develop. Within biofilms, the spatial distribution of these components can vary. Here we present a fundamental characterization study to show differences between biofilms formed by Gram-positive methicillin-resistant Staphylococcus aureus (MRSA), Gram-negative Pseudomonas aeruginosa, and the yeast-type Candida albicans using synchrotron macro attenuated total reflectance-Fourier transform infrared (ATR-FTIR) microspectroscopy. We were able to characterise the pathogenic biofilms' heterogeneous distribution, which is challenging to do using traditional techniques. Multivariate analyses revealed that the polysaccharides area (1200-950 cm^-1) accounted for the most significant variance between biofilm samples, and other spectral regions corresponding to amides, lipids, and polysaccharides all contributed to sample variation. In general, this study will advance our understanding of microbial biofilms and serve as a model for future research on how to use synchrotron source ATR-FTIR microspectroscopy to analyse their variations and spatial arrangements.

Structural and mechanical characterization of biofilm-associated bacterial polymer in the emulsification of petroleum hydrocarbon

The marine bacterium Pseudomonas furukawaii PPS-19 isolated from the oil-polluted site of Paradip port, Odisha, India, was found to form a strong biofilm in 2% (v/v) crude oil. Confocal Laser Scanning Microscopy (CLSM) revealed biofilm components along with multi-layered dense biofilm of rod-shaped cells with 64.7 µm thickness. Scanning electron micrographs showed similar biofilm architecture covered with a gluey matrix of extracellular polymeric substances (EPS) in the presence of 2% (v/v) crude oil. The architecture of purified EPS was also studied through FESEM that exposed its porous and three-dimensional flakes-like structure. The structural characterization by FTIR revealed that EPS was composed of primary alkane, amines, halide, hydroxyl groups, uronic acid, and saccharides. The XRD profile exhibited an amorphous phase of the EPS with a crystallinity index of 0.336. The EPS showed three-step thermal decomposition and thermal stability up to 600 °C, as confirmed by TGA and DSC thermogram. EPS produced by marine bacterium P. furukawaii PPS-19 could act as bioemulsifier and showed the highest emulsifying activity of 66.23% on petrol. The emulsifying ability of the EPS was superior to the commercial polymer xanthan. The emulsion also showed high stability with time and temperature exposure. The marine bacterium P. furukawaii PPS-19 and the EPS complex showed 89.52% degradation of crude oil within 5 days. These properties demonstrated the potential of biofilm-forming marine bacterium as bioemulsifier for its application in the bioremediation of oil-polluted sites.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-02795-8.

Impact of temperature-dependent phage expression on Pseudomonas aeruginosa biofilm formation

Pseudomonas aeruginosa is a ubiquitous opportunistic pathogen that forms robust biofilms in the different niches it occupies. Numerous physiological adaptations are required as this organism shifts from soil or aquatic environments to a host-associated lifestyle. While many conditions differ between these niches, temperature shifts are a factor that can contribute to physiological stress during this transition. To understand how temperature impacts biofilm formation in this pathogen, we used proteomic and transcriptomic tools to elucidate physiological responses in environment-relevant vs. host-relevant temperatures. These studies uncovered differential expression of various proteins including a phage protein that is associated with the EPS matrix in P. aeruginosa. This filamentous phage was induced at host temperatures and was required for full biofilm-forming capacity specifically at human body temperature. These data highlight the importance of temperature shift in biofilm formation and suggest bacteriophage proteins could be a possible therapeutic target in biofilm-associated infections.

Advances in the characterization and monitoring of natural organic matter using spectroscopic approaches

Natural organic matter (NOM) is ubiquitous in environment and plays a fundamental role in the geochemical cycling of elements. It is involved in a wide range of environmental processes and can significantly affect the environmental fates of exogenous contaminants. Understanding the properties and environmental behaviors of NOM is critical to advance water treatment technologies and environmental remediation strategies. NOM is composed of characteristic light-absorbing/emitting functional groups, which are the "identification card" of NOM and susceptive to ambient physiochemical changes. These groups and their variations can be captured through optical sensing. Therefore, spectroscopic techniques are elegant tools to track the sources, features, and environmental behaviors of NOM. In this work, the most recent advances in molecular spectroscopic techniques, including UV-Vis, fluorescence, infrared, and Raman spectroscopy, for the characterization, measurement, and monitoring of NOM are reviewed, and the state-of-the-art innovations are highlighted. Furthermore, the limitations of current spectroscopic approaches for the exploration of NOM-related environmental processesand how these weaknesses/drawbacks can be addressed are explored. Finally, suggestions and directions are proposed to advance the development of spectroscopic methods in analyzing and elucidating the properties and behaviors of NOM in natural and engineered environments.

Testing Anti-Biofilm Polymeric Surfaces: Where to Start?

Present day awareness of biofilm colonization on polymeric surfaces has prompted the scientific community to develop an ever-increasing number of new materials with anti-biofilm features. However, compared to the large amount of work put into discovering potent biofilm inhibitors, only a small number of papers deal with their validation, a critical step in the translation of research into practical applications. This is due to the lack of standardized testing methods and/or of well-controlled in vivo studies that show biofilm prevention on polymeric surfaces; furthermore, there has been little correlation with the reduced incidence of material deterioration. Here an overview of the most common methods for studying biofilms and for testing the anti-biofilm properties of new surfaces is provided.

Soil Particles and Phenanthrene Interact in Defining the Metabolic Profile of Pseudomonas putida G7: A Vibrational Spectroscopy Approach

In soil, organic matter and mineral particles (soil particles; SPs) strongly influence the bio-available fraction of organic pollutants, such as polycyclic aromatic hydrocarbons (PAHs), and the metabolic activity of bacteria. However, the effect of SPs as well as comparative approaches to discriminate the metabolic responses to PAHs from those to simple carbon sources are seldom considered in mineralization experiments, limiting our knowledge concerning the dynamics of contaminants in soil. In this study, the metabolic profile of a model PAH-degrading bacterium, Pseudomonas putida G7, grown in the absence and presence of different SPs (i.e., sand, clays and humic acids), using either phenanthrene or glucose as the sole carbon and energy source, was characterized using vibrational spectroscopy (i.e., FT-Raman and FT-IR spectroscopy) and multivariate classification analysis (i.e., PLS-DA). The different type of SPs specifically altered the metabolic profile of P. putida, especially in combination with phenanthrene. In comparison to the cells grown in the absence of SPs, sand induced no remarkable change in the metabolic profile of the cells, whereas clays and humic acids affected it the most, as revealed by the higher discriminative accuracy (R², RMSEP and sensitivity) of the PLS-DA for those conditions. With respect to the carbon-source (phenanthrene vs. glucose), no effect on the metabolic profile was evident in the absence of SPs or in the presence of sand. On the other hand, with clays and humic acids, more pronounced spectral clusters between cells grown on glucose or on phenanthrene were evident, suggesting that these SPs modify the way cells access and metabolize PAHs. The macromolecular changes regarded mainly protein secondary structures (a shift from α-helices to β-sheets), amino acid levels, nucleic acid conformation and cell wall carbohydrates. Our results provide new interesting evidences that SPs specifically interact with PAHs in defining bacteria metabolic profiles and further emphasize the importance of studying the interaction of bacteria with their surrounding matrix to deeply understand PAHs degradation in soils.

Reduced Chlorine in Drinking Water Distribution Systems Impacts Bacterial Biodiversity in Biofilms

In drinking water distribution systems (DWDS), a disinfectant residual is usually applied to limit bacterial regrowth. However, delivering water with no or reduced chlorine residual could potentially decrease the selection for antimicrobial resistant microorganisms, favor bacterial regrowth and result in changes in bacterial populations. To evaluate the feasibility of water reduction in local DWDS while ensuring water safety, water quality was measured over 2 months in two different networks, each of them harboring sub-areas with normal and reduced chlorine. Water quality remained good in chlorine reduced samples, with limited development of total flora and absence of coliforms. Furthermore, 16S rRNA amplicon-based metagenomics was used to investigate the diversity and the composition of microbial communities in the sub-networks. Taxonomic classification of sequence reads showed a reduced bacterial diversity in sampling points with higher chlorine residuals. Chlorine disinfection created more homogeneous bacterial population, dominated by Pseudomonas, a genus that contains some major opportunistic pathogens such as P. aeruginosa. In the absence of chlorine, a larger and unknown biodiversity was unveiled, also highlighted by a decreased rate of taxonomic classification to the genus and species level. Overall, this experiment in a functional DWDS will facilitate the move toward potable water delivery systems without residual disinfectants and will improve water taste for consumers.

High Correlation Between Structure Development and Chemical Variation During Biofilm Formation by Vibrio parahaemolyticus

The complex three-dimensional structure of biofilms is supported by extracellular polymeric substances (EPSs) and additional insight on chemical variations in EPS and biofilm structure development will inform strategies for control of biofilms. Vibrio parahaemolyticus VPS36 biofilm development was studied using confocal laser scanning microscopy (CLSM) and Raman spectroscopy (RM). The structural parameters of the biofilm (biovolume, mean thickness, and porosity) were characterized by CLSM and the results showed that VPS36 biofilm formed dense structures after 48 h incubation. There were concurrent variations in carbohydrates and nucleic acids contents in the EPS as evidenced by RM. The Raman intensities of the chemical component in EPS, measured using Pearson's correlation coefficient, were positively correlated with biovolume and mean thickness, and negatively correlated with porosity. The Raman intensity for carbohydrates correlated closely with mean thickness (p-value < 0.01) and the Raman intensity for nucleic acid correlated closely with porosity (p-value < 0.01). Additional evidence for these correlations were confirmed using scanning electron microscopic (SEM) and crystal violet staining.

Effect of Laser Irradiation on Cell Function and Its Implications in Raman Spectroscopy

Lasers are instrumental in advanced bioimaging and Raman spectroscopy. However, they are also well known for their destructive effects on living organisms, leading to concerns about the adverse effects of laser technologies. To implement Raman spectroscopy for cell analysis and manipulation, such as Raman-activated cell sorting, it is crucial to identify nondestructive conditions for living cells. Here, we evaluated quantitatively the effect of 532-nm laser irradiation on bacterial cell fate and growth at the single-cell level. Using a purpose-built microfluidic platform, we were able to quantify the growth characteristics, i.e., specific growth rates and lag times of individual cells, as well as the survival rate of a population in conjunction with Raman spectroscopy. Representative Gram-negative and Gram-positive species show similar trends in response to a laser irradiation dose. Laser irradiation could compromise the physiological function of cells, and the degree of destruction is both dose and strain dependent, ranging from reduced cell growth to a complete loss of cell metabolic activity and finally to physical disintegration. Gram-positive bacterial cells are more susceptible than Gram-negative bacterial strains to irradiation-induced damage. By directly correlating Raman acquisition with single-cell growth characteristics, we provide evidence of nondestructive characteristics of Raman spectroscopy on individual bacterial cells. However, while strong Raman signals can be obtained without causing cell death, the variety of responses from different strains and from individual cells justifies careful evaluation of Raman acquisition conditions if cell viability is critical.

IMPORTANCE In Raman spectroscopy, the use of powerful monochromatic light in laser-based systems facilitates the detection of inherently weak signals. This allows environmentally and clinically relevant microorganisms to be measured at the single-cell level. The significance of being able to perform Raman measurement is that, unlike label-based fluorescence techniques, it provides a “fingerprint” that is specific to the identity and state of any (unlabeled) sample. Thus, it has emerged as a powerful method for studying living cells under physiological and environmental conditions. However, the laser's high power also has the potential to kill bacteria, which leads to concerns. The research presented here is a quantitative evaluation that provides a generic platform and methodology to evaluate the effects of laser irradiation on individual bacterial cells. Furthermore, it illustrates this by determining the conditions required to nondestructively measure the spectra of representative bacteria from several different groups.

Genus- and species-level identification of dermatophyte fungi by surface-enhanced Raman spectroscopy

This paper demonstrates that surface-enhanced Raman spectroscopy (SERS) coupled with principal component analysis (PCA) can serve as a fast and reliable technique for detection and identification of dermatophyte fungi at both genus and species level. Dermatophyte infections are the most common mycotic diseases worldwide, affecting a quarter of the human population. Currently, there is no optimal method for detection and identification of fungal diseases, as each has certain limitations. Here, for the first time, we have achieved with a high accuracy, differentiation of dermatophytes representing three major genera, i.e. Trichophyton, Microsporum, and Epidermophyton. Two first principal components (PC), namely PC-1 and PC-2, gave together 97% of total variance. Additionally, species-level identification within the Trichophyton genus has been performed. PC-1 and PC-2, which are the most diagnostically significant, explain 98% of the variance in the data obtained from spectra of: Trichophyton rubrum, Trichophyton menatgrophytes, Trichophyton interdigitale and Trichophyton tonsurans. This study offers a new diagnostic approach for the identification of dermatophytes. Being fast, reliable and cost-effective, it has the potential to be incorporated in the clinical practice to improve diagnostics of medically important fungi.

Raman and Surface-Enhanced Raman Scattering for Biofilm Characterization

Biofilms are a communal way of living for microorganisms in which microorganism cells are surrounded by extracellular polymeric substances (EPS). Most microorganisms can live in biofilm form. Since microorganisms are everywhere, understanding biofilm structure and composition is crucial for making the world a better place to live, not only for humans but also for other living creatures. Raman spectroscopy is a nondestructive technique and provides fingerprint information about an analyte of interest. Surface-enhanced Raman spectroscopy is a form of this technique and provides enhanced scattering of the analyte that is in close vicinity of a nanostructured noble metal surface such as silver or gold. In this review, the applications of both techniques and their combination with other biofilm analysis techniques for characterization of composition and structure of biofilms are discussed.

Taking control over microbial populations: Current approaches for exploiting biological noise in bioprocesses

Phenotypic plasticity of microbial cells has attracted much attention and several research efforts have been dedicated to the description of methods aiming at characterizing phenotypic heterogeneity and its impact on microbial populations. However, different approaches have also been suggested in order to take benefit from noise in a bioprocess perspective, e.g. by increasing the robustness or productivity of a microbial population. This review is dedicated to outline these controlling methods. A common issue, that has still to be addressed, is the experimental identification and the mathematical expression of noise. Indeed, the effective interfacing of microbial physiology with external parameters that can be used for controlling physiology depends on the acquisition of reliable signals. Latest technologies, like single cell microfluidics and advanced flow cytometric approaches, enable linking physiology, noise, heterogeneity in productive microbes with environmental cues and hence allow correctly mapping and predicting biological behavior via mathematical representations. However, like in the field of electronics, signals are perpetually subjected to noise. If appropriately interpreted, this noise can give an additional insight into the behavior of the individual cells within a microbial population of interest. This review focuses on recent progress made at describing, treating and exploiting biological noise in the context of microbial populations used in various bioprocess applications.

Effects of synthetic iron and aluminium oxide surface charge and hydrophobicity on the formation of bacterial biofilm

In this research, bacterial cell attachments to hematite, goethite and aluminium hydroxide were investigated. The aim was to study the effects of these minerals' hydrophobicity and pH-dependent surface charge on the extent of biofilm formation using six genetically diverse bacterial strains: Rhodococcus spp. (RC92 & RC291), Pseudomonas spp. (Pse1 & Pse2) and Sphingomonas spp. (Sph1 & Sph2), which had been previously isolated from contaminated environments. The surfaces were prepared in a way that was compatible with the naturally occurring coating process in aquifers: deposition of colloidal particles from the aqueous phase. The biofilms were evaluated using a novel, in situ and non-invasive technique developed for this purpose. A manufactured polystyrene 12-well plate was used as the reference surface to be coated with synthesized minerals by deposition of their suspended particles through evaporation. Planktonic phase growth indicates that it is independent of the surface charge and hydrophobicity of the studied surfaces. The hydrophobic similarities failed to predict biofilm proliferation. Two of the three hydrophilic strains formed extensive biofilms on the minerals. The third one, Sph2, showed anomalies in contrast to the expected electrostatic attraction between the minerals and the cell surface. Further research showed how the solution's ionic strength affects Sph2 surface potential and shapes the extent of its biofilm formation; reducing the ionic strength from ≈200 mM to ≈20 mM led to a tenfold increase in the number of cells attached to hematite. This study provides a technique to evaluate biofilm formation on metal-oxide surfaces, under well-controlled conditions, using a simple yet reliable method. The findings also highlight that cell numbers in the planktonic phase do not necessarily show the extent of cell attachment, and thorough physicochemical characterization of bacterial strains, substrata and the aquifer medium is fundamental to successfully implementing any bioremediation projects.

Adsorption of poly acrylic acid onto the surface of calcite: an experimental and simulation study

Macromolecular binding to minerals is of great importance in the formation of biofilms, and carboxylate functional groups have been found to play a pivotal role in the functioning of these macromolecules. Here we present both fluorescence time-resolved anisotropy measurements and simulation data on the conformational behaviour and binding of a poly acrylic acid polymer. In solution the polymer exhibits a pH dependent behaviour, with a coiled conformation at a low pH and extended conformation at higher pH values. The polymer is readily adsorbed on the surface of calcite, preferring to bind in an extended conformation, with the strength of the adsorption dependent on the pH and presence of counter ions. We discuss the reasons why the calculated adsorption free energy differs from that obtained from a Langmuir isotherm analysis, showing that they refer to different quantities. The enhanced binding of the extended conformations shows the importance of flexibility in the binding of macromolecules.

Confocal microscopy imaging of the biofilm matrix

The extracellular matrix is an integral part of microbial biofilms and an important field of research. Confocal laser scanning microscopy is a valuable tool for the study of biofilms, and in particular of the biofilm matrix, as it allows real-time visualization of fully hydrated, living specimens. Confocal microscopes are held by many research groups, and a number of methods for qualitative and quantitative imaging of the matrix have emerged in recent years. This review provides an overview and a critical discussion of techniques used to visualize different matrix compounds, to determine the concentration of solutes and the diffusive properties of the biofilm matrix.

A new insight into the role of intracellular nickel levels for the stress response, surface properties and twitching motility by Haemophilus influenzae

Nickel acts as a co-factor for a small number of enzymes in bacteria. Urease is one of the two nickel-dependent enzymes that have been identified in Haemophilus influenzae; glyoxalase I is the other. However, nickel has been suggested to have roles in H. influenzae that can not attributed to the function of these enzymes. We have previously shown that in the H. influenzae strain Rd KW20 the inability to acquire nickel led to alterations to the cell-type; an increased biofilm formation and changes in cell surface properties. Here we report the differences in the genome wide gene expression between Rd KW20 and a strain incapable of importing nickel (nikQ); revealing a link between intracellular nickel levels and genes involved in metabolic pathways, stress responses and genes associated with surface factors such as type IV pili. We have then taken a strain previously shown to use type IV pili both in biofilm formation and for twitching motility (86-028NP) and have shown its homologous genes (NTHI1417-1422; annotated as cobalt transporter, cbiKLMOQ) did import nickel and mutations in this locus had pleiotropic effects correlating to stress response and motility. Compared to wild type cells, the nickel depleted cells were more electronegativity charged, they aggregated and formed a biofilm. Correct intracellular nickel levels were also important for resistance to oxidative stress; the nickel depleted cells were more sensitive to oxidative stress. The nickel depleted cells were also non-motile, but the addition specifically of nickel returned these cells to a wild type motility state. We have also analysed the role of nickel uptake in a naturally, urease negative strain (the blood isolate R2866) and depleting intracellular nickel (a nikQ mutant) in this strain effected a similar range of cell functions. These data reveal a role for the capacity to acquire nickel from the environment and for the correct intracellular nickel levels as part of H. influenzae stress response and in signalling for a switch to a sessile bacterial lifestyle.

Microbial Surface Colonization and Biofilm Development in Marine Environments

Biotic and abiotic surfaces in marine waters are rapidly colonized by microorganisms. Surface colonization and subsequent biofilm formation and development provide numerous advantages to these organisms and support critical ecological and biogeochemical functions in the changing marine environment. Microbial surface association also contributes to deleterious effects such as biofouling, biocorrosion, and the persistence and transmission of harmful or pathogenic microorganisms and their genetic determinants. The processes and mechanisms of colonization as well as key players among the surface-associated microbiota have been studied for several decades. Accumulating evidence indicates that specific cell-surface, cell-cell, and interpopulation interactions shape the composition, structure, spatiotemporal dynamics, and functions of surface-associated microbial communities. Several key microbial processes and mechanisms, including (i) surface, population, and community sensing and signaling, (ii) intraspecies and interspecies communication and interaction, and (iii) the regulatory balance between cooperation and competition, have been identified as critical for the microbial surface association lifestyle. In this review, recent progress in the study of marine microbial surface colonization and biofilm development is synthesized and discussed. Major gaps in our knowledge remain. We pose questions for targeted investigation of surface-specific community-level microbial features, answers to which would advance our understanding of surface-associated microbial community ecology and the biogeochemical functions of these communities at levels from molecular mechanistic details through systems biological integration.

Interrogating chemical variation via layer-by-layer SERS during biofouling and cleaning of nanofiltration membranes with further investigations into cleaning efficiency

Periodic chemical cleaning is an essential step to maintain nanofiltration (NF) membrane performance and mitigate biofouling, a major impediment in high-quality water reclamation from wastewater effluent. To target the important issue of how to clean and control biofouling more efficiently, this study developed surface-enhanced Raman spectroscopy (SERS) as a layer-by-layer tool to interrogate the chemical variations during both biofouling and cleaning processes. The fact that SERS only reveals information on the surface composition of biofouling directly exposed to cleaning reagents makes it ideal for evaluating cleaning processes and efficiency. SERS features were highly distinct and consistent with different biofouling stages (bacterial adhesion, rapid growth, mature and aged biofilm). Cleaning was performed on two levels of biofouling after 18 h (rapid growth of biofilm) and 48 h (aged biofilm) development. An opposing profile of SERS bands between biofouling and cleaning was observed and this suggests a layer-by-layer cleaning mode. In addition, further dynamic biochemical and infrastructural changes were demonstrated to occur in the more severe 48-h biofouling, resulting in the easier removal of sessile cells from the NF membrane. Biofouling substance-dependent cleaning efficiency was also evaluated using the surfactant sodium dodecyl sulfate (SDS). SDS appeared more efficient in cleaning lipid than polysaccharide and DNA. Protein and DNA were the predominant residual substances (irreversible fouling) on NF membrane leading to permanent flux loss. The chemical information revealed by layer-by-layer SERS will lend new insights into the optimization of cleaning reagents and protocols for practical membrane processes.

Raman spectroscopic differentiation of planktonic bacteria and biofilms

Both biofilm formations as well as planktonic cells of water bacteria such as diverse species of the Legionella genus as well as Pseudomonas aeruginosa, Klebsiella pneumoniae, and Escherichia coli were examined in detail by Raman microspectroscopy. Production of various molecules involved in biofilm formation of tested species in nutrient-deficient media such as tap water was observed and was particularly evident in the biofilms formed by six Legionella species. Biofilms of selected species of the Legionella genus differ significantly from the planktonic cells of the same organisms in their lipid amount. Also, all Legionella species have formed biofilms that differ significantly from the biofilms of the other tested genera in the amount of lipids they produced. We believe that the significant increase in the synthesis of this molecular species may be associated with the ability of Legionella species to form biofilms. In addition, a combination of Raman microspectroscopy with chemometric approaches can distinguish between both planktonic form and biofilms of diverse bacteria and could be used to identify samples which were unknown to the identification model. Our results provide valuable data for the development of fast and reliable analytic methods based on Raman microspectroscopy, which can be applied to the analysis of tap water-adapted microorganisms without any cultivation step.

Chemical composition of Enterococcus faecalis in biofilm cells initiated from different physiologic states

Enterococcus faecalis is a ubiquitous bacterium of the gut that is observed in persistent periradicular infections. Its pathogenicity is associated with biofilm formation and the ability to survive under nutrient-poor (starvation) conditions. However, characteristics of chemical composition of biofilm cells developed by starved E. faecalis cells remain poorly understood. In this study, E. faecalis cells in exponential, stationary, and starvation phases were prepared and separately cultured to form biofilms. Confocal laser scanning microscopy was performed to verify biofilm formation. Raman microscopy was used to investigate the chemical composition of cells within the biofilms. Compared to cells in exponential or stationary phase, starved cells developed biofilms with fewer culturable cells (P < 0.05). Raman analysis revealed that cells produced in the biofilms from starved planktonic cells contained more protein and less nucleic acids than either the corresponding planktonic cells or the cells in biofilms from planktonic cells in exponential or stationary phases, suggesting that biofilm-grown cells from the starvation phase were characterized by increased synthesis of proteins and decreased nucleic acids. This study provides an insight into the chemical composition of biofilm cells developed by starved E. faecalis.

Bacterial community dynamics during the early stages of biofilm formation in a chlorinated experimental drinking water distribution system: implications for drinking water discolouration

Aims

To characterize bacterial communities during the early stages of biofilm formation and their role in water discolouration in a fully representative, chlorinated, experimental drinking water distribution systems (DWDS).

Methods and Results

Biofilm development was monitored in an experimental DWDS over 28 days; subsequently the system was disturbed by raising hydraulic conditions to simulate pipe burst, cleaning or other system conditions. Biofilm cell cover was monitored by fluorescent microscopy and a fingerprinting technique used to assess changes in bacterial community. Selected samples were analysed by cloning and sequencing of the 16S rRNA gene. Fingerprinting analysis revealed significant changes in the bacterial community structure over time (P < 0·05). Cell coverage increased over time accompanied by an increase in bacterial richness and diversity.

Conclusions

Shifts in the bacterial community structure were observed along with an increase in cell coverage, bacterial richness and diversity. Species related to Pseudomonas spp. and Janthinobacterium spp. dominated the process of initial attachment. Based on fingerprinting results, the hydraulic regimes did not affect the bacteriological composition of biofilms, but they did influence their mechanical stability.

Significance and Importance of the Study

This study gives a better insight into the early stages of biofilm formation in DWDS and will contribute to the improvement of management strategies to control the formation of biofilms and the risk of discolouration.

There is a specific response to pH by isolates of Haemophilus influenzae and this has a direct influence on biofilm formation

Background

Haemophilus influenzae colonizes the nasopharynx as a commensal. Strain-specific factors allow some strains to migrate to particular anatomical niches, such as the middle ear, bronchi or blood, and induce disease by surviving within the conditions present at these sites in the body. It is established that H. influenzae colonization and in some cases survival is highly dependent on their ability to form a biofilm. Biofilm formation is a key trait in the development of chronic infection by certain isolates. This is exemplified by the contrast between the biofilm-forming strains found in middle ear infections and those isolates that survive within the blood and are rarely associated with biofilm development.

Results

Screening a group of H. influenzae strains revealed only slight variations in their growth across a range of pH conditions. However, some isolates responded to a pH of 8.0 by the formation of a biofilm. While the type b capsular blood isolate Eagan did not form a biofilm and grew at the same rate regardless of pH 6.8-8.0, transcriptomic analyses demonstrated that at pH 8.0 it uniquely induced a gluconate-uptake and metabolism pathway, which concurrently imports H⁺. A non-typeable H. influenzae, isolated from the middle ear, induced biofilm formation at pH 8.0, and at this pH it induced a series of iron acquisition genes, consistent with previous studies linking iron homeostasis to biofilm lifestyle.

Conclusions

Different strains of H. influenzae cope with changes in environmental factors using strain-specific mechanisms. These pathways define the scope and mode of niche-survival for an isolate. The pH is a property that is different from the middle ear (at least pH 8.0) compared to other sites that H. influenzae can colonize and infect. The transcriptional response to increasing pH by H. influenzae varies between strains, and pH is linked to pathways that allow strains to either continue free-living growth or induction of a biofilm. We showed that a biofilm-forming isolate induced iron metabolism pathways, whereas a strain that does not form biofilm at increasing pH induced mechanisms for growth and pH homeostasis based on sugar acid transport.

Escherichia coli biofilms have an organized and complex extracellular matrix structure

Bacterial biofilms are ubiquitous in nature, and their resilience is derived in part from a complex extracellular matrix that can be tailored to meet environmental demands. Although common developmental stages leading to biofilm formation have been described, how the extracellular components are organized to allow three-dimensional biofilm development is not well understood. Here we show that uropathogenic Escherichia coli (UPEC) strains produce a biofilm with a highly ordered and complex extracellular matrix (ECM). We used electron microscopy (EM) techniques to image floating biofilms (pellicles) formed by UPEC. EM revealed intricately constructed substructures within the ECM that encase individual, spatially segregated bacteria with a distinctive morphology. Mutational and biochemical analyses of these biofilms confirmed curli as a major matrix component and revealed important roles for cellulose, flagella, and type 1 pili in pellicle integrity and ECM infrastructure. Collectively, the findings of this study elucidated that UPEC pellicles have a highly organized ultrastructure that varies spatially across the multicellular community.

Bacteria can form biofilms in diverse niches, including abiotic surfaces, living cells, and at the air-liquid interface of liquid media. Encasing these cellular communities is a self-produced extracellular matrix (ECM) that can be composed of proteins, polysaccharides, and nucleic acids. The ECM protects biofilm bacteria from environmental insults and also makes the dissolution of biofilms very challenging. As a result, formation of biofilms within humans (during infection) or on industrial material (such as water pipes) has detrimental and costly effects. In order to combat bacterial biofilms, a better understanding of components required for biofilm formation and the ECM is required. This study defined the ECM composition and architecture of floating pellicle biofilms formed by Escherichia coli.