Biological Control of Crystal Texture: A Widespread Strategy for Adapting Crystal Properties to Function

Evaluating the single crystallinity of sea urchin calcite

Recent advancements in electron backscatter diffraction (EBSD) data evaluation enable the determination of misorientation between crystals below 0.1°, while with conventional EBSD data evaluation, the smallest misorientation precision between crystals scatters between 0.5°-1°. Sea urchin tests and spines are lightweight biomaterials with a serrated microstructure comprising interlinked calcite crystals. We investigated the microstructure and crystallographic texture of Cidaris cidaris and Paracentrotus lividus test and spine calcite with advanced EBSD measurement and data evaluation. In particular, we re-evaluated the widely accepted single-crystallinity of sea urchin calcite. We found that the test and the spines comprise calcite crystals with different fabrics and a significant variation in crystal co-orientation strength. Even the highly co-oriented calcite of C. cidaris and P. lividus is not perfectly single-crystalline. We found test and spine portions that feature significant internal misorientations (1-3°). Test c-axis orientation in C. cidaris is tangential to the outer test surface, while in the spines, it is parallel to the morphological axis of the spine. Primary and secondary spines feature a bimodal crystal texture comprising co-oriented calcite surrounded by a cortex of misoriented crystals. Crystal misorientation in the spine cortex seems to result mainly from competitive growth determinants. Deciphering the degree of crystallinity and mode of crystal organisation of biological hard tissues is vital for understanding their exceptional control of structure, material architecture and material properties. STATEMENT OF SIGNIFICANCE: Echinoids form lightweight biomineralised skeletal elements with outstanding material properties and a complex microstructure formed of interlinked calcite crystals. The degree of crystallinity and the crystallographic organisation of the calcitic tests and spines are still under debate. We investigate and discuss the crystallinity, microstructure, and texture of Cidaris cidaris and Paracentrotus lividus test and spine crystals. Unprecedented and not yet used for biomineralised carbonate tissues, we apply electron backscatter diffraction pattern matching data evaluation, enabling detection of misorientation precision below 0.1°, relative to 0.5°-1° misorientation precision obtained from conventional EBSD data evaluation. We demonstrate that sea urchin test plates and spines are not single crystals. They feature internal small-angle misorientations and poorly co-oriented, polycrystalline regions with intricate microstructures.

Nineteenth Century Amorphous Calcium Carbonate

The work of the English anatomist George Rainey is compared with that of the Dutch naturalist Pieter Harting. While the latter is regarded as a pioneer in biomimetic inorganic crystallography for precipitating unusual crystallographic forms that mimic the products of living organisms, the work of Rainey largely has been forgotten. In fact, Rainey first prepared amorphous calcium carbonate, a material that can be molded by organisms to form biogenic crystals. Rainey's extensive experimentation with amorphous calcareous bodies observed in a variety of organisms was at one time considered a significant and pioneering chapter in inorganic chemical morphogenesis and it should reclaim some of its former assessments. Rainey's interpretations of crystal form and the effects of gravity on crystal growth mechanisms, however, are historical curiosities that should be left behind, except to the extent that they show how the efforts of an individual may appear diminished by the dynamic process of consensus building in science. Harting also prepared amorphous calcium carbonate, but more than a decade after Rainey. While Rainey was a quiet scholar with steady habits, Harting was a statesman, a champion of the down-trodden (albeit with prejudice), a popular educator, a temperance advocate, and a sci-fi novelist, in addition to being a professor. Harting's public life may account for his outsized place in our collective memory. Rainey's synthesis of amorphous calcium carbonate in the presence of gum arabic was repeated in a modern setting. Microspheres were characterized by scanning electron microscopy, established as hollow by X-ray microtomography, and were shown to have the composition of calcium carbonate by energy dispersive X-ray analysis. They were amorphous by powder X-ray diffraction.

Constructing Multifunctional Composite Single Crystals via Polymer Gel Incorporation

The non-uniformity of a single crystal can sometimes be found in biominerals, where surrounding biomacromolecules are incorporated into the growing crystals. This unique composite structure, combining heterogeneity and long-range ordering, enables the functionalization of single crystals. Polymer gel media are often used to prepare composite single crystals, in which the growing crystals incorporate gel networks and form a bi-continuous interpenetrating structure without any disruption to single crystallinity. Moreover, dyes and many kinds of nanoparticles can be occluded into single crystals under the guidance of gel incorporation. On this basis, the bio-inspired method has been applied in crystal morphology control, crystal dyeing, mechanical reinforcement, and organic bulk heterojunction-based optoelectronics. In this paper, the composite structure, the incorporation mechanisms, and the multiple functions of gel-incorporated single crystals are reviewed.

Stearate-Coated Biogenic Calcium Carbonate from Waste Seashells: A Sustainable Plastic Filler

Waste seashells from aquaculture are a massive source of biogenic calcium carbonate (bCC) that can be a potential substitute for ground calcium carbonate and precipitated calcium carbonate. These last materials find several applications in industry after a surface coating with hydrophobic molecules, with stearate as the most used. Here, we investigate for the first time the capability of aqueous stearate dispersions to coat bCC powders from seashells of market-relevant mollusc aquaculture species, namely the oyster Crassostrea gigas, the scallop Pecten jacobaeus, and the clam Chamelea gallina. The chemical-physical features of bCC were extensively characterized by different analytical techniques. The results of stearate adsorption experiments showed that the oyster shell powder, which is the bCC with a higher content of the organic matrix, showed the highest adsorption capability (about 23 wt % compared to 10 wt % of geogenic calcite). These results agree with the mechanism proposed in the literature in which stearate adsorption mainly involves the formation of calcium stearate micelles in the dispersion before the physical adsorption. The coated bCC from oyster shells was also tested as fillers in an ethylene vinyl acetate compound used for the preparation of shoe soles. The obtained compound showed better mechanical performance than the one prepared using ground calcium. In conclusion, we can state that bCC can replace ground and precipitated calcium carbonate and has a higher stearate adsorbing capability. Moreover, they represent an environmentally friendly and sustainable source of calcium carbonate that organisms produce by high biological control over composition, polymorphism, and crystal texture. These features can be exploited for applications in fields where calcium carbonate with selected features is required.

Pb Removal Efficiency by Calcium Carbonates: Biogenic versus Abiogenic Materials

The sorption of heavy metals on mineral surfaces plays a key role in controlling the fate and bioavailability of harmful elements through dissolution-precipitation reactions. Here, we investigate the efficiency of Pb removal from highly contaminated waters by two calcium carbonate hard tissues, scallop shells (up to 99.9 mol %; -biocalcite) and cuttlefish bones (up to 90.0 mol %; bioaragonite), which template the precipitation of the highly insoluble mineral cerussite (PbCO3). The experiments show that both biomaterials are about five times more effective Pb scavengers (5 mmol of cerussite precipitated/g sample) than their inorganic counterparts (∼1 mmol/g). We relate this enhanced Pb scavenging capacity of biocarbonates to their composite organic-inorganic nature, which modulates their specific nano- and microstructural features and defines their larger surface areas, solubility, and reactivity compared to those of their inorganic counterparts. The oriented growth of cerussite progressively passivates the bioaragonite surface, reducing its long-term Pb scavenging capacity. In contrast, the randomly oriented growth of cerussite crystals on biocalcite prevents surface passivation and explains why biocalcite outperforms bioaragonite as a long-term Pb scavenger. The use of biocarbonates could be a key for designing more efficient decontamination strategies for heavy metal-polluted waters.

Local Crystallographic Texture of a Nummulite (Foraminifera) Test from the Eocene Deposits of the Crimea Peninsula

Unicellular protozoa form calcium carbonate tests. It is important to understand the features and mechanisms of its formation. This may shed light on the processes of shell formation in metazoans. One of the most important characteristics of the Protozoa carbonate test is the degree of crystal ordering that can be described by crystallographic texture. The crystallographic texture data of calcite in the foraminifera Nummulites distans (Deshayes) test from the Eocene deposits (Cenozoic, Paleogene) of the Crimea Peninsula are obtained using X-ray diffraction. A very strict orientation of the crystals is revealed. The calcite texture sharpness is several times greater than in the shells of the bivalve mollusk Placuna placenta (Linnaeus), measured by the same method. It also exceeds the crystallographic texture and sharpness of the same mineral in the shells of the bivalves of Mytilus galloprovincialis (Lamarck), studied by neutron diffraction. It is concluded that a high level of control during test formation is already characteristic of protozoa. Studying the processes involved in the formation of a very sharp crystallographic texture can become an important direction for creating nature-like materials with desired properties.

Factors Controlling Complex Morphologies of Isomorphous Metal-Organic Frameworks

We demonstrate here how nitrate salts of bivalent copper, nickel, cobalt, and manganese, along with an achiral organic ligand, assemble into various structures such as symmetrical double-decker flowers, smooth elongated hexagonal bipyramids, and hexagonal prisms. Large morphological changes occur in these structures because of different metal cations, although they maintain isomorphous hexagonal crystallographic structures. Metal cations with stronger coordination to ligands (Cu and Ni) tend to form uniform crystals with unusual shapes, whereas weaker coordinating metal cations (Mn and Co) produce crystals with more regular hexagonal morphologies. The unusual flower-like crystals formed with copper nitrate have two pairs of six symmetrical petals with hexagonal convex centers. The texture of the petals indicates dendritic growth. Two different types of morphologies were formed by using different copper nitrate-to-ligand ratios. An excess of the metal salt results in uniform and hexagonal crystals having a narrow size distribution, whereas the use of an excess of ligand results in double-decker morphologies. Mechanistically, an intermediate structure was observed with slightly concave facets and a domed center. Such structures most likely play a key role in the formation of double-decker crystals that can be formed by fusion processes. The coordination chemistry results in isostructural chiral frameworks consisting of two types of continuous helical channels. Four pyridine units from four separate ligands are coordinated to the metal center in a plane having a chiral (propeller-type) arrangement. The individual double-decker flower crystals are homochiral and a batch consists of crystals having both handedness.

Photo-actuators via epitaxial growth of microcrystal arrays in polymer membranes

Photomechanical crystals composed of three-dimensionally ordered and densely packed photochromes hold promise for high-performance photochemical actuators. However, bulk crystals with high structural ordering are severely limited in their flexibility, resulting in poor processibility and a tendency to fragment upon light exposure, while previous nano- or microcrystalline composites have lacked global alignment. Here we demonstrate a photon-fuelled macroscopic actuator consisting of diarylethene microcrystals in a polyethylene terephthalate host matrix. These microcrystals survive large deformations and show a high degree of three-dimensional ordering dictated by the anisotropic polyethylene terephthalate, which critically also has a similar stiffness. Overall, these ordered and compliant composites exhibit rapid response times, sustain a performance of over at least hundreds of cycles and generate work densities exceeding those of single crystals. Our composites represent the state-of-the-art for photochemical actuators and enable properties unattainable by single crystals, such as controllable, reversible and abrupt jumping (photosalient behaviour).

Multi-Functionalization of Single crystals Mediated by Gel-Incorporation: A Bioinspired Strategy

Biominerals are inherently organic-inorganic crystal composites. Drawing inspiration from this biomineral structure, functionalized single crystals can be synthesized using the gel-grown method, resulting in the incorporation of gel-networks into the host crystals. By incorporating gel-networks, diverse guest materials, such as nanoparticles and dye molecules, can be uniformly and isotropically distributed within the crystals, thereby imparting non-intrinsic optical or magnetic properties to the host crystals. Additionally, gel-incorporation enhances the toughness and stability of the crystals as the incorporated gel-fibers and accompanying guest materials act as bridges to prevent crack propagation. Furthermore, gel-incorporation enables protein crystals to exhibit self-healing properties, which can be attributed to the dynamic bonding interaction between gel-networks and crystals. Notably, recent research has demonstrated that the incorporation of zwitterionic gel-networks enhances the charge effects on crystal morphology evolution as the charged groups become bound to the developing crystal surfaces, and their detachment is impeded by the interconnected gel-networks. Therefore, preparing single crystals with gel-incorporation is a remarkable strategy for synthesizing functionalized crystal materials.

Morphological Evolution of Calcite Grown in Zwitterionic Hydrogels: Charge Effects Enhanced by Gel-Incorporation

The incorporation of charged biomacromolecules is widely found in biomineralization. To investigate the significance of this biological strategy for mineralization control, gelatin-incorporated calcite crystals grown from gelatin hydrogels with different charge concentrations along the gel networks are examined. It is found that the bound charged groups on gelatin networks (amino cations, gelatin-NH₃ ⁺ and carboxylic anions, gelatin-COO^- ) play crucial roles in controlling the single-crystallinity and the crystal morphology. And the charge effects are greatly enhanced by the gel-incorporation because the incorporated gel networks force the bound charged groups on them to attach to crystallization fronts. In contrast, ammonium ions (NH₄ ⁺ ) and acetate ions (Ac^- ) dissolve in the crystallization media do not exhibit the similar charge effects because the balance of attachment/detachment make them more difficult to be incorporated. Employing the revealed charge effects, the calcite crystal composites with different morphologies can be flexibly prepared.

Elemental compositions of sea urchin larval cell vesicles evaluated by cryo-STEM-EDS and cryo-SEM-EDS

During spicule formation in sea urchin larvae, calcium ions translocate within the primary mesenchymal cells (PMCs) from endocytosed seawater vacuoles to various organelles and vesicles where they accumulate, and subsequently precipitate. During this process, calcium ions are concentrated by more than three orders of magnitude, while other abundant ions (Na, Mg) must be removed. To obtain information about the overall ion composition in the vesicles, we used quantitative cryo-SEM-EDS and cryo-STEM-EDS analyzes. For cryo-STEM-EDS, thin (500 nm) frozen hydrated lamellae of PMCs were fabricated using cryo-focused ion beam-SEM. The lamellae were then loaded into a cryo-TEM, imaged and the ion composition of electron dense bodies was measured. Analyzes performed on 18 Ca-rich particles/particle clusters from 6 cells contained Ca, Na, Mg, S and P in different ratios. Surprisingly, all the Ca-rich particles contained P in amounts up to almost 1:1 of Ca. These cryo-STEM-EDS results were qualitatively confirmed by cryo-SEM-EDS analyzes of 310 vesicles, performed on high pressure frozen and cryo-planed samples. We discuss the advantages and limitations of the two techniques, and their potential applicability, especially to study ion transport pathways and ion trafficking in cells involved in mineralization. STATEMENT OF SIGNIFICANCE: The 'inorganic side of life', encompassing ion trafficking and ion storage in soft tissues of organisms, is a generally overlooked problem. Addressing such a problem becomes possible through the application of innovative techniques, performed in cryogenic conditions, which preserve the tissues in quasi-physiological state. We developed here a set of analytical tools, cryo-SEM-EDS, and cryo-STEM-EDS, which allow reconstructing the ion composition inside vesicles in sea urchin larval cells, on their way to deposit mineral in the skeletons. The techniques are complex, and we evaluate here the advantages and disadvantages of each technique. The methodologies that we are developing here can be applied to other cells and other pathways as well, eventually leading to quantitative elemental analyzes of tissues under cryogenic conditions.

Biomineralized Materials as Model Systems for Structural Composites: 3D Architecture

Biomineralized materials are sophisticated material systems with hierarchical 3D material architectures, which are broadly used as model systems for fundamental mechanical, materials science, and biomimetic studies. The current knowledge of the structure of biological materials is mainly based on 2D imaging, which often impedes comprehensive and accurate understanding of the materials' intricate 3D microstructure and consequently their mechanics, functions, and bioinspired designs. The development of 3D techniques such as tomography, additive manufacturing, and 4D testing has opened pathways to study biological materials fully in 3D. This review discusses how applying 3D techniques can provide new insights into biomineralized materials that are either well known or possess complex microstructures that are challenging to understand in the 2D framework. The diverse structures of biomineralized materials are characterized based on four universal structural motifs. Nacre is selected as an example to demonstrate how the progression of knowledge from 2D to 3D can bring substantial improvements to understanding the growth mechanism, biomechanics, and bioinspired designs. State-of-the-art multiscale 3D tomographic techniques are discussed with a focus on their integration with 3D geometric quantification, 4D in situ experiments, and multiscale modeling. Outlook is given on the emerging approaches to investigate the synthesis-structure-function-biomimetics relationship.

Biomineralized Materials as Model Systems for Structural Composites: Intracrystalline Structural Features and Their Strengthening and Toughening Mechanisms

Biomineralized composites, which are usually composed of microscopic mineral building blocks organized in 3D intercrystalline organic matrices, have evolved unique structural designs to fulfill mechanical and other biological functionalities. While it has been well recognized that the intricate architectural designs of biomineralized composites contribute to their remarkable mechanical performance, the structural features within and corresponding mechanical properties of individual mineral building blocks are often less appreciated in the context of bio-inspired structural composites. The mineral building blocks in biomineralized composites exhibit a variety of salient intracrystalline structural features, such as, organic inclusions, inorganic impurities (or trace elements), crystalline features (e.g., amorphous phases, single crystals, splitting crystals, polycrystals, and nanograins), residual stress/strain, and twinning, which significantly modify the mechanical properties of biogenic minerals. In this review, recent progress in elucidating the intracrystalline structural features of three most common biomineral systems (calcite, aragonite, and hydroxyapatite) and their corresponding mechanical significance are discussed. Future research directions and corresponding challenges are proposed and discussed, such as the advanced structural characterizations and formation mechanisms of intracrystalline structures in biominerals, amorphous biominerals, and bio-inspired synthesis.

Designed nanostructures created via physicochemical switching of the growth mode between single crystals and mesocrystals

Most biominerals are composed of mesocrystals, in which individual nanoparticle building units have a defined long-range order on the atomic scale in at least one direction. Although the crystal size and orientation of the mesostructures are spatially designed in biological architectures, it has been difficult to achieve adequate control of the crystal growth to produce modulated mesostructures in artificial aqueous systems. Here, we propose a simple physicochemical approach for the spatial design of nanostructures using an aqueous solution system. The ordered arrays of oriented fluorapatite (FA) rods similar to tooth enamel are produced on a polymer substrate in a supersaturated solution. We succeeded in reversible switching of the growth mode of FA between single-crystalline rods and mesocrystalline grains through the disturbance of the solution. The primary crystal size was tuned between micrometric rods ∼0.5 μm wide and >5 μm long and nanoscale grains ∼10 nm wide and 50 nm long without a drastic change in the c direction. Hierarchical architectures consisting of iso-oriented FA microrods and nanograins were constructed via temporal control of the crystal growth mode by switching a physicochemical parameter, such as the degree of supersaturation at the growth front.

Ion Pathways in Biomineralization: Perspectives on Uptake, Transport, and Deposition of Calcium, Carbonate, and Phosphate

Minerals are formed by organisms in all of the kingdoms of life. Mineral formation pathways all involve uptake of ions from the environment, transport of ions by cells, sometimes temporary storage, and ultimately deposition in or outside of the cells. Even though the details of how all this is achieved vary enormously, all pathways need to respect both the chemical limitations of ion manipulation, as well as the many "housekeeping" roles of ions in cell functioning. Here we provide a chemical perspective on the biological pathways of biomineralization. Our approach is to compare and contrast the ion pathways involving calcium, phosphate, and carbonate in three very different organisms: the enormously abundant unicellular marine coccolithophores, the well investigated sea urchin larval model for single crystal formation, and the complex pathways used by vertebrates to form their bones. The comparison highlights both common and unique processes. Significantly, phosphate is involved in regulating calcium carbonate deposition and carbonate is involved in regulating calcium phosphate deposition. One often overlooked commonality is that, from uptake to deposition, the solutions involved are usually supersaturated. This therefore requires not only avoiding mineral deposition where it is not needed but also exploiting this saturated state to produce unstable mineral precursors that can be conveniently stored, redissolved, and manipulated into diverse shapes and upon deposition transformed into more ordered and hence often functional final deposits.

PbI2-TiO2 Bulk Heterojunctions with Long-Range Ordering for X-ray Detectors

High-performance X-ray detectors are usually based on single crystals, due to the long-range ordering and hence outstanding electronic properties. On the other hand, bulk heterojunctions (BHJs) that can effectively enhance photogenerated exciton dissociation are widely used for photodetectors. The benefits of both spur investigation into how to combine these two strategies to enhance X-ray detection. Here, TiO₂ networks are incorporated into PbI₂ crystals to form interpenetrating type II heterojunctions, namely BHJs. These BHJs exhibit long-range ordering in molecular packing similar to that of single crystals. Compared with single crystals, the long-range ordered BHJs facilitate the separation of photogenerated electrons and holes to inhibit recombination, extend the mobility lifetime product by 6.4 times, and consequently improve X-ray sensitivity by 5.8 times. Hence, this work provides a new strategy using gel-grown crystals to fabricate high-performance X-ray detectors as well as a new platform for studying the behavior of X-ray-generated carriers in BHJs with long-range ordering.

Coccolith crystals: Pure calcite or organic-mineral composite structures?

The localization of organic material within biominerals is central to developing biomineral formation mechanisms. Coccoliths, morphologically sophisticated calcite platelets of intracellularly calcifying coccolithophores, are not only eco-physiologically important, but also influence biogeochemical cycles through mass production. Despite their importance and over a century of research, the formation mechanism of coccoliths is still poorly understood. Crucial unsolved questions include the localization of organic material within coccoliths. In extracellular calcifiers the discovery of an organics-containing nano-structure within seemingly single crystals has led to the formulation of a two-step crystallization mechanism. Coccoliths are traditionally thought of as being formed by a different mechanism, but it is unclear whether coccolith crystals possess a nano-structure. Here we review the evidence for and against such a nano-structure. Current SXPD analyses suggest a nano-structure of some kind, while imaging methods (SEM, TEM, AFM) provide evidence against it. We suggest directions for future research which should help solve this puzzle. STATEMENT OF SIGNIFICANCE: Coccolithophores, unicellular calcifying algae, are important primary producers and contribute significantly to pelagic calcium carbonate export. Their calcite platelets, the coccoliths, are amongst the most sophisticated biomineral structures. Understanding the crystallization mechanism of coccolith crystals is not only central to coccolithophore cell biology but also lies at the heart of biomineralization research more generally. The crystallization mechanism of coccoliths has remained largely elusive, not least because it is still an open question whether the micron sized coccolith crystals are pure calcite, or contain organic material. Here we review the state of the art and suggest a way to solve this central problem.

Effect of CO2 driven ocean acidification on calcification, physiology and ovarian cells of tropical sea urchin Salmacis virgulata - A microcosm approach

In the present study, we depict the structural modification of test minerals, physiological response and ovarian damage in the tropical sea urchin Salmacis virgulata using microcosm CO₂ (Carbon dioxide) perturbation experiment. S. virgulata were exposed to hypercapnic conditions with four different pH levels using CO₂ gas bubbling method that reflects ambient level (pH 8.2) and elevated pCO₂ scenarios (pH 8.0, 7.8 and 7.6). The variations in physical strength and mechanical properties of S. virgulata test were evaluated by thermogravimetric analysis, Fourier transform infrared spectroscopy, X-ray diffraction analysis and scanned electron microscopy analysis. Biomarker enzymes such as glutathione-S-transferase, catalase, acetylcholine esterase, lipid peroxidase and reduced glutathione showed physiological stress and highly significant (p < 0.01) towards pH 7.6 and 7.8 treatments. Ovarian cells were highly damaged at pH 7.6 and 7.8 treatments. This study proved that the pH level 7.6 and 7.8 drastically affect calcification, physiological response and ovarian cells in S. virgulata.

DNA nanostructures as templates for biomineralization

Nature uses extracellular matrix scaffolds to organize biominerals into hierarchical structures over various length scales. This has inspired the design of biomimetic mineralization scaffolds, with DNA nanostructures being among the most promising. DNA nanotechnology makes use of molecular recognition to controllably give 1D, 2D and 3D nanostructures. The control we have over these structures makes them attractive templates for the synthesis of mineralized tissues, such as bones and teeth. In this Review, we first summarize recent work on the crystallization processes and structural features of biominerals on the nanoscale. We then describe self-assembled DNA nanostructures and come to the intersection of these two themes: recent applications of DNA templates in nanoscale biomineralization, a crucial process to regenerate mineralized tissues.

Hybrid Spider Silk with Inorganic Nanomaterials

High-performance functional biomaterials are becoming increasingly requested. Numerous natural and artificial polymers have already demonstrated their ability to serve as a basis for bio-composites. Spider silk offers a unique combination of desirable aspects such as biocompatibility, extraordinary mechanical properties, and tunable biodegradability, which are superior to those of most natural and engineered materials. Modifying spider silk with various inorganic nanomaterials with specific properties has led to the development of the hybrid materials with improved functionality. The purpose of using these inorganic nanomaterials is primarily due to their chemical nature, enhanced by large surface areas and quantum size phenomena. Functional properties of nanoparticles can be implemented to macro-scale components to produce silk-based hybrid materials, while spider silk fibers can serve as a matrix to combine the benefits of the functional components. Therefore, it is not surprising that hybrid materials based on spider silk and inorganic nanomaterials are considered extremely promising for potentially attractive applications in various fields, from optics and photonics to tissue regeneration. This review summarizes and discusses evidence of the use of various kinds of inorganic compounds in spider silk modification intended for a multitude of applications. It also provides an insight into approaches for obtaining hybrid silk-based materials via 3D printing.

Polymerization-induced self-assembly for the fabrication of polymeric nano-objects with enhanced structural stability by cross-linking

This review discusses the strategies of core-cross-linking in most of the PISA literatures (including post-polymerization cross-linking, photo-cross-linking and in situ cross-linking) and the applications of the cross-linked nano-objects.

Hydroxyl-rich macromolecules enable the bio-inspired synthesis of single crystal nanocomposites

Acidic macromolecules are traditionally considered key to calcium carbonate biomineralisation and have long been first choice in the bio-inspired synthesis of crystalline materials. Here, we challenge this view and demonstrate that low-charge macromolecules can vastly outperform their acidic counterparts in the synthesis of nanocomposites. Using gold nanoparticles functionalised with low charge, hydroxyl-rich proteins and homopolymers as growth additives, we show that extremely high concentrations of nanoparticles can be incorporated within calcite single crystals, while maintaining the continuity of the lattice and the original rhombohedral morphologies of the crystals. The nanoparticles are perfectly dispersed within the host crystal and at high concentrations are so closely apposed that they exhibit plasmon coupling and induce an unexpected contraction of the crystal lattice. The versatility of this strategy is then demonstrated by extension to alternative host crystals. This simple and scalable occlusion approach opens the door to a novel class of single crystal nanocomposites.

Biomimetic macroscopic mesocrystalline films produced by oriented assembly of nanorods under magnetic field

Millimeter-scale mesocrystals and cross-lamellae mimicking the nanostructure of seashells were produced on a substrate through the three-dimensionally oriented assembly of c-axis-elongated calcite nanorods ∼50 nm wide and ∼500-1000 nm long by combining arrangement with evaporation-driven capillary force and alignment under an intense magnetic field.

Encapsulation of Plant Viral Particles in Calcite Crystals

The concept of biomineralization and encapsulation of organic molecules into inorganic matrices to alter and enhance their physical properties has been evolved and perfected in natural systems. Being inspired by the natural biomineralization of foreign components into calcite, here the inclusion of a plant virus, cowpea mosaic virus (CPMV) of 5.4% by mass into crystals of calcite is reported. The viral particles are labeled with a fluorescent tag (Alexa Fluor 532), and are observed within the calcite matrix using confocal fluorescence microscopy. Upon encapsulation, the calcite crystals exhibit an irregular and aggregated morphology, as visualized with atomic force and electron microscopy. The viral particles protected inside the calcite crystals are able to resist harsh chemical agents. While spherical viral particles such as CPMV can be easily included in calcite, viruses such as the tobacco mosaic virus are not compatible with the host, presumably due to their high aspect ratio. The results provide a simple and scalable method to incorporate viral particles into inorganic matrix, and could prove useful in thermal stabilization of sensitive viral biological agents such as vaccines in the future.

Biomineralization of varied calcium carbonate crystals by the synergistic effect of silk fibroin/magnesium ions in a microbial system

The influence of silk fibroin (SF) and magnesium ions (Mg²⁺) on calcium carbonate (CaCO₃) bio-mineralization has been investigated.

Revealing crystalline domains in a mollusc shell single-crystalline prism

Biomineralization integrates complex processes leading to an extraordinary diversity of calcareous biomineral crystalline architectures, in intriguing contrast with the consistent presence of a sub-micrometric granular structure. Hence, gaining access to the crystalline architecture at the mesoscale, that is, over a few granules, is key to building realistic biomineralization scenarios. Here we provide the nanoscale spatial arrangement of the crystalline structure within the 'single-crystalline' prisms of the prismatic layer of a Pinctada margaritifera shell, exploiting three-dimensional X-ray Bragg ptychography microscopy. We reveal the details of the mesocrystalline organization, evidencing a crystalline coherence extending over a few granules. We additionally prove the existence of larger iso-oriented crystalline domains, slightly misoriented with respect to each other, around one unique rotation axis, and whose shapes are correlated with iso-strain domains. The highlighted mesocrystalline properties support recent biomineralization models involving partial fusion of oriented nanoparticle assembly and/or liquid droplet precursors.

Biomineralization of calcium carbonate in the cell wall of Lithothamnion crispatum (Hapalidiales, Rhodophyta): correlation between the organic matrix and the mineral phase

Over the past few decades, progress has been made toward understanding the mechanisms of coralline algae mineralization. However, the relationship between the mineral phase and the organic matrix in coralline algae has not yet been thoroughly examined. The aim of this study was to describe the cell wall ultrastructure of Lithothamnion crispatum, a cosmopolitan rhodolith-forming coralline algal species collected near Salvador (Brazil), and examine the relationship between the organic matrix and the nucleation and growth/shape modulation of calcium carbonate crystals. A nanostructured pattern was observed in L. crispatum along the cell walls. At the nanoscale, the crystals from L. crispatum consisted of several single crystallites assembled and associated with organic material. The crystallites in the bulk of the cell wall had a high level of spatial organization. However, the crystals displayed cleavages in the (104) faces after ultrathin sectioning with a microtome. This organism is an important model for biomineralization studies as the crystallographic data do not fit in any of the general biomineralization processes described for other organisms. Biomineralization in L. crispatum is dependent on both the soluble and the insoluble organic matrix, which are involved in the control of mineral formation and organizational patterns through an organic matrix-mediated process. This knowledge concerning the mineral composition and organizational patterns of crystals within the cell walls should be taken into account in future studies of changing ocean conditions as they represent important factors influencing the physico-chemical interactions between rhodoliths and the environment in coralline reefs.

Hierarchical textures on aragonitic shells of the hyaline radial foraminifer Hoeglundina elegans

Aragonitic shells of a hyaline radial foraminifer Hoeglundina elegans consist of a thin top layer and micrometer-scale columnar domains that are regarded as bundled pillars comprising iso-oriented nanograins.

3D visualization of additive occlusion and tunable full-spectrum fluorescence in calcite

From biomineralization to synthesis, organic additives provide an effective means of controlling crystallization processes. There is growing evidence that these additives are often occluded within the crystal lattice. This promises an elegant means of creating nanocomposites and tuning physical properties. Here we use the incorporation of sulfonated fluorescent dyes to gain new understanding of additive occlusion in calcite (CaCO₃), and to link morphological changes to occlusion mechanisms. We demonstrate that these additives are incorporated within specific zones, as defined by the growth conditions, and show how occlusion can govern changes in crystal shape. Fluorescence spectroscopy and lifetime imaging microscopy also show that the dyes experience unique local environments within different zones. Our strategy is then extended to simultaneously incorporate mixtures of dyes, whose fluorescence cascade creates calcite nanoparticles that fluoresce white. This offers a simple strategy for generating biocompatible and stable fluorescent nanoparticles whose output can be tuned as required.

Introducing organic guests to a crystal is a convenient way to tailor its properties. Here, the authors occlude fluorescent dyes within calcite to reveal that additives can occupy distinct zones of a crystal, and strategically embed green, blue, and red dyes to create white fluorescent calcite.

Occlusion of Sulfate-Based Diblock Copolymer Nanoparticles within Calcite: Effect of Varying the Surface Density of Anionic Stabilizer Chains

Polymerization-induced self-assembly (PISA) offers a highly versatile and efficient route to a wide range of organic nanoparticles. In this article, we demonstrate for the first time that poly(ammonium 2-sulfatoethyl methacrylate)-poly(benzyl methacrylate) [PSEM–PBzMA] diblock copolymer nanoparticles can be prepared with either a high or low PSEM stabilizer surface density using either RAFT dispersion polymerization in a 2:1 v/v ethanol/water mixture or RAFT aqueous emulsion polymerization, respectively. We then use these model nanoparticles to gain new insight into a key topic in materials chemistry: the occlusion of organic additives into inorganic crystals. Substantial differences are observed for the extent of occlusion of these two types of anionic nanoparticles into calcite (CaCO₃), which serves as a suitable model host crystal. A low PSEM stabilizer surface density leads to uniform nanoparticle occlusion within calcite at up to 7.5% w/w (16% v/v), while minimal occlusion occurs when using nanoparticles with a high PSEM stabilizer surface density. This counter-intuitive observation suggests that an optimum anionic surface density is required for efficient occlusion, which provides a hitherto unexpected design rule for the incorporation of nanoparticles within crystals.

Bioinspired Synthesis of CaCO3 Superstructures through a Novel Hydrogel Composite Membranes Mineralization Platform: A Comprehensive View

Hydrogel composite membranes (HCMs) are used as novel mineralization platforms for the bioinspired synthesis of CaCO3 superstructures. A comprehensive statistical analysis of the experimental results reveals quantitative relationships between crystallization conditions and crystal texture and a strong selectivity toward complex morphologies when monomers bearing carboxyl and hydroxyl groups are used together in the hydrogel layer synthesis in HCMs.

Intracrystalline inclusions within single crystalline hosts: from biomineralization to bio-inspired crystal growth

A review of the inclusion of organic matter within single crystalline hosts: from biogenic minerals to bio-inspired nanohybrid single crystal composites.