Anode biofilm transcriptomics reveals outer surface components essential for high density current production in Geobacter sulfurreducens fuel cells

The role of CsrA in controls the extracellular electron transfer and biofilm production in Geobacter sulfurreducens

CsrA is a post-transcriptional regulator that controls biofilm formation, virulence, carbon metabolism, and motility, among other phenotypes in bacteria. CsrA has been extensively studied in γ-proteobacteria and firmicutes, However the cellular processes controlled for regulation in δ-proteobacteria remain unknown. In this work, we constructed and characterized the ΔcsrA mutant strain in Geobacter sulfurreducens to determine the involvement of the CsrA protein in the regulation of biofilm and extracellular electron transfer. The ΔcsrA mutant strain shows higher rates of insoluble Fe(III) reduction than the wild type using acetate as electron donor and the growth with fumarate and soluble (Fe(III)) was similar to wild type. Biofilm quantification and characterization by confocal laser scanning microscopy, showed that the ΔcsrA mutant produces up to twice as much biofilm as the wild type strain and more than 95% viable cells. Transcriptome analysis by RNA-seq showed that in ΔcsrA biofilms developed on an inert support, differentially expressed 244 genes (103 upregulated and 141 downregulated), including those related to extracellular electron transfer, exopolysaccharide synthesis, c-di-GMP synthesis and degradation. To validate the transcriptome data, RT-qPCR confirmed the differential expression of several selected genes in the ΔcsrA strain. Also, current production in microbial fuel cells was performed and the ΔcsrA strain produced 45-50% more current than the wild type. To identify the genes that changed expression in the ΔcsrA strain in the graphite electrodes in an MFC, a transcriptome analysis was performed 181 genes changed their expression in the ΔcsrA biofilms, of which 113 genes were differentially expressed only in MFC and 68 genes changed their expression as well as the transcriptome of biofilms grown on glass. In silico analysis of the 5'-UTR regions revealed that 76 genes that changed expression in the RNA-seq analysis have a consensus sequence for CsrA binding. To our knowledge this is the first report describing the involvement of CsrA in the regulation of extracellular electron transfer and biofilm in a member of the δ-proteobacteria.

Electroactive biofilm communities in microbial fuel cells for the synergistic treatment of wastewater and bioelectricity generation

Increasing industrialization and urbanization have contributed to a significant rise in wastewater discharge and exerted extensive pressure on the existing natural energy resources. Microbial fuel cell (MFC) is a sustainable technology that utilizes wastewater for electricity generation. MFC comprises a bioelectrochemical system employing electroactive biofilms of several aerobic and anaerobic bacteria, such as Geobacter sulfurreducens, Shewanella oneidensis, Pseudomonas aeruginosa, and Ochrobacterum pseudiintermedium. Since the electroactive biofilms constitute a vital part of the MFC, it is crucial to understand the biofilm-mediated pollutant metabolism and electron transfer mechanisms. Engineering electroactive biofilm communities for improved biofilm formation and extracellular polymeric substances (EPS) secretion can positively impact the bioelectrochemical system and improve fuel cell performance. This review article summarizes the role of electroactive bacterial communities in MFC for wastewater treatment and bioelectricity generation. A significant focus has been laid on understanding the composition, structure, and function of electroactive biofilms in MFC. Various electron transport mechanisms, including direct electron transfer (DET), indirect electron transfer (IET), and long-distance electron transfer (LDET), have been discussed. A detailed summary of the optimization of process parameters and genetic engineering strategies for improving the performance of MFC has been provided. Lastly, the applications of MFC for wastewater treatment, bioelectricity generation, and biosensor development have been reviewed.

Electro-bioremediation of wastewater: Transitioning the focus on pure cultures to elucidate the missing mechanistic insights upon electro-assisted biodegradation of exemplary pollutants

Electro-bioremediation of exemplary water pollutants such as nitrogenous, phosphorous, and sulphurous compounds, hydrocarbons, metals and azo dyes has already been studied at a macro-scale level using mixed cultures. The technology has been generally established as a proof of concept at the technology readiness level (TRL) of 3, and there are already specific cases where the technology reached TRL 5. However, this technology is less utilized compared to traditional approaches. Although, mixed cultures result in high electro-biodegradation efficiency, their use hinders process' mechanistic insights which are better determined through pure cultures studies. This knowledge can lead to improved technologies. Therefore, this manuscript focuses on the specific pollutants' electro-biodegradation by pure cultures, assessing the availability of information regarding genes, enzymes, proteins and metabolites involved. Furthermore, studies characterizing the dominant genera or species are assessed, in which the available information at molecular level is evaluated. In total, less than 40 studies were found which were predominantly focused on the electro-biodegradation potential rather than the mechanistic insights. This highlights a gap in the field featuring a motivation to transitioning the focus on the study of pure cultures to unravel the mechanistic insights. Therefore, specific actions are suggested. Characterization of the mixed cultures followed by microorganisms' isolation is crucial. Thus, electroactive and biodegradation characteristics will be revealed using omics, genome annotation and transcriptional kinetics. This can lead to optimization at the microbiological level through genetic engineering, synthetic biology, mathematical modelling and strategic building of co-cultures. This research focus offers new avenues for sustainable wastewater treatment.

Biology-Based Synthesis of Nickel Single Atoms on the Surface of Geobacter sulfurreducens as an Efficient Electrocatalyst for Alkaline Water Electrolysis

Single-atom metal catalysts are promising electrocatalysts for water electrolysis. Nickel-based electrocatalysts have shown attractive application prospects for water electrolysis. However, synthesizing stable Ni single atoms using chemical and physical approaches remains a practical challenge. Here, a facile and precise method for synthesizing stable nickel single atoms on the surface of Geobacter sulfurreducens using a microbial-mediated extracellular electron transfer (EET) process is demonstrated. It is shown that G. sulfurreducens can effectively anchor nickel single atoms on their surface. X-ray absorption near-edge structure and Fourier-transformed extended X-ray absorption fine structure spectroscopy confirm that the nickel single atom is coordinated to nitrogen in the cytochromes. The as-synthesized nickel single atoms on G. sulfurreducens exhibit excellent bifunctional catalytic properties for alkaline water electrolysis with low overpotential (η) to achieve current density (10 mA cm-2) for both hydrogen evolution reactions (η = 80 mV) and oxygen evolution reaction (η = 330 mV) with minimal catalyst loading of 0.0015 mg Ni cm-2. The nickel single-atom catalyst shows long-term stability at a constant electrode potential. This synthesis method based on the EET capability of electroactive bacteria provides a simple and scalable approach for producing low-cost and highly efficient nonnoble transition metal single-atom catalysts for practical applications.

Specific interaction of resorufin to outer-membrane cytochrome OmcE of Geobacter sulfurreducens: A new insight on artificial electron mediators in promoting extracellular electron transfer

Bioelectrochemical system (BES) is a unique biotechnology for wastewater treatment and energy recovery, and extracellular electron transfer (EET) between microbe and electrode is the key to optimize the performance of BESs. Resazurin is an effective artificial compound that can promote EET in BESs, but the way how it transports electrons is not fully understood. In this study differential pulse voltammetry revealed that the redox potential of resorufin (RR) (intermediate of resazurin reduction, actual electron mediator) within Geobacter sulfurreducens biofilm was positively shifted by 100 mV than that of free RR, and this shift was attenuated by the mutation of outer-membrane cytochrome gene omcE but not by omcS and omcZ mutation, indicating that RR specifically interacted with OmcE. By using heterologously expressed OmcE monomers in Escherichia coli, it was found that RR bonded with OmcE monomers with a moderate intensity (dissociation constant of 720 nM), and their interaction obviously increased the content of α helix in OmcE monomers. Biomolecular analysis indicated that heme II of OmcE monomer might be the binding site for RR (binding energy of -7.01 kJ/mol), which were favorable for electron transfer within OmcE-RR complex. Comparative transcriptomics showed that RZ addition significantly upregulated the expression of omcE, periplasmic cytochrome gene ppcB, and outer-membrane genes omaB, ombB and omcB, thus, it was hypothesized that OmcE-bound RR might serve as potential electron acceptor of OmbB-OmaB-OmcB porin complex which passes electrons across outer membrane. Our work demonstrated a new pathway of artificial electron mediators in facilitating EET in Geobacter species, which may guide the application of electron mediator in improving the performance of BESs.

Simultaneous Reduction and Methylation of Nanoparticulate Mercury: The Critical Role of Extracellular Electron Transfer

Mercury nanoparticles are abundant in natural environments. Yet, understanding their contribution to global biogeochemical cycling of mercury remains elusive. Here, we show that microbial transformation of nanoparticulate divalent mercury can be an important source of elemental and methylmercury.Geobacter sulfurreducensPCA, a model bacterium predominant in anoxic environments (e.g., paddy soils), simultaneously reduces and methylates nanoparticulate Hg(II). Moreover, the relative prevalence of these two competing processes and the dominant transformation pathways differ markedly between nanoparticulate Hg(II) and its dissolved and bulk-sized counterparts. Notably, even when intracellular reduction of Hg(II) nanoparticles is constrained by cross-membrane transport (a rate-limiting step that also regulates methylation), the overall Hg(0) formation remains substantial due to extracellular electron transfer. With multiple lines of evidence based on microscopic and electrochemical analyses, gene knockout experiments, and theoretical calculations, we show that nanoparticulate Hg(II) is preferentially associated with c-type cytochromes on cell membranes and has a higher propensity for accepting electrons from the heme groups than adsorbed ionic Hg(II), which explains the surprisingly larger extent of reduction of nanoparticles than dissolved Hg(II) at relatively high mercury loadings. These findings have important implications for the assessment of global mercury budgets as well as the bioavailability of nanominerals and mineral nanoparticles.

Ethanol-type anaerobic digestion enhanced methanogenic performance by stimulating direct interspecies electron transfer and interspecies hydrogen transfer

Ethanol pre-fermentation of food waste effectively alleviates acidification; however, its effects on interspecies electron transfer remain unknown. This study configured the feed according to COD ratios of ethanol: sodium acetate: sodium propionate: sodium butyrate of 5:2:1.5:1.5 (ethanol-type anaerobic digestion) and 0:5:2.5:2.5 (control), and conducted semi-continuous anaerobic digestion (AD) experiments. The results showed that ethanol-type AD increased maximum tolerable organic loading rate (OLR) to 6.0 gCOD/L/d, and increased the methane production by 1.2-14.8 times compared to the control at OLRs of 1.0-5.0 gCOD/L/d. The abundance of the pilA gene, which was associated with direct interspecies electron transfer (DIET), increased by 5.6 times during ethanol-type AD. Hydrogenase genes related to interspecies hydrogen transfer (IHT), including hydA-B, hoxH-Y, hnd, ech, and ehb, were upregulated during ethanol-type AD. Ethanol-type AD improved methanogenic performance and enhanced microbial metabolism by stimulating DIET and IHT.

The robustness of porin-cytochrome gene clusters from Geobacter metallireducens in extracellular electron transfer

To investigate their roles in extracellular electron transfer (EET), the porin-cytochrome (pcc) gene clusters Gmet0825-0828, Gmet0908-0910, and Gmet0911-0913 of the Gram-negative bacterium Geobacter metallireducens were deleted. Failure to delete all pcc gene clusters at the same time suggested their essential roles in extracellular reduction of Fe(III)-citrate by G. metallireducens. Deletion of Gmet0825-0828 had no impact on bacterial reduction of Fe(III)-citrate but diminished bacterial reduction of ferrihydrite and abolished anode reduction and direct interspecies electron transfer (DIET) to Methanosarcina barkeri and Geobacter sulfurreducens. Although it had no impact on the bacterial reduction of Fe(III)-citrate, deletion of Gmet0908-0910 delayed ferrihydrite reduction, abolished anode reduction, and diminished DIET. Deletion of Gmet0911-0913 had little impact on DIET but diminished bacterial reductions of Fe(III)-citrate, ferrihydrite, and anodes. Most importantly, deletions of both Gmet0825-0828 and Gmet0908-0910 restored bacterial reduction of ferrihydrite and anodes and DIET. Enhanced expression of Gmet0911-0913 in this double mutant when grown in coculture with G. sulfurreducens ΔhybLΔfdnG suggested that this cluster might compensate for impaired EET functions of deleting Gmet0825-0828 and Gmet0908-0910. Thus, these pcc gene clusters played essential, distinct, overlapping, and compensatory roles in EET of G. metallireducens that are difficult to characterize as deletion of some clusters affected expression of others. The robustness of these pcc gene clusters enabled G. metallireducens to mediate EET to different acceptors for anaerobic growth even when two of its three pcc gene clusters were inactivated by mutation. The results from this investigation provide new insights into the roles of pcc gene clusters in bacterial EET.

IMPORTANCE

The Gram-negative bacterium Geobacter metallireducens is of environmental and biotechnological significance. Crucial to the unique physiology of G. metallireducens is its extracellular electron transfer (EET) capability. This investigation sheds new light on the robust roles of the three porin-cytochrome (pcc) gene clusters, which are directly involved in EET across the bacterial outer membrane, in the EET of G. metallireducens. In addition to their essential roles, these gene clusters also play distinct, overlapping, and compensatory roles in the EET of G. metallireducens. The distinct roles of the pcc gene clusters enable G. metallireducens to mediate EET to a diverse group of electron acceptors for anaerobic respirations. The overlapping and compensatory roles of the pcc gene clusters enable G. metallireducens to maintain and restore its EET capability for anaerobic growth when one or two of its three pcc gene clusters are deleted from the genome.

Novel Insights on Extracellular Electron Transfer Networks in the Desulfovibrionaceae Family: Unveiling the Potential Significance of Horizontal Gene Transfer

Some sulfate-reducing bacteria (SRB), mainly belonging to the Desulfovibrionaceae family, have evolved the capability to conserve energy through microbial extracellular electron transfer (EET), suggesting that this process may be more widespread than previously believed. While previous evidence has shown that mobile genetic elements drive the plasticity and evolution of SRB and iron-reducing bacteria (FeRB), few have investigated the shared molecular mechanisms related to EET. To address this, we analyzed the prevalence and abundance of EET elements and how they contributed to their differentiation among 42 members of the Desulfovibrionaceae family and 23 and 59 members of Geobacteraceae and Shewanellaceae, respectively. Proteins involved in EET, such as the cytochromes PpcA and CymA, the outer membrane protein OmpJ, and the iron-sulfur cluster-binding CbcT, exhibited widespread distribution within Desulfovibrionaceae. Some of these showed modular diversification. Additional evidence revealed that horizontal gene transfer was involved in the acquiring and losing of critical genes, increasing the diversification and plasticity between the three families. The results suggest that specific EET genes were widely disseminated through horizontal transfer, where some changes reflected environmental adaptations. These findings enhance our comprehension of the evolution and distribution of proteins involved in EET processes, shedding light on their role in iron and sulfur biogeochemical cycling.

Expression of filaments of the Geobacter extracellular cytochrome OmcS in Shewanella oneidensis

The physiological role of Geobacter sulfurreducens extracellular cytochrome filaments is a matter of debate and the development of proposed electronic device applications of cytochrome filaments awaits methods for large-scale cytochrome nanowire production. Functional studies in G. sulfurreducens are stymied by the broad diversity of redox-active proteins on the outer cell surface and the redundancy and plasticity of extracellular electron transport routes. G. sulfurreducens is a poor chassis for producing cytochrome nanowires for electronics because of its slow, low-yield, anaerobic growth. Here we report that filaments of the G. sulfurreducens cytochrome OmcS can be heterologously expressed in Shewanella oneidensis. Multiple lines of evidence demonstrated that a strain of S. oneidensis, expressing the G. sulfurreducens OmcS gene on a plasmid, localized OmcS on the outer cell surface. Atomic force microscopy revealed filaments with the unique morphology of OmcS filaments emanating from cells. Electron transfer to OmcS appeared to require a functional outer-membrane porin-cytochrome conduit. The results suggest that S. oneidensis, which grows rapidly to high culture densities under aerobic conditions, may be suitable for the development of a chassis for producing cytochrome nanowires for electronics applications and may also be a good model microbe for elucidating cytochrome filament function in anaerobic extracellular electron transfer.

Significance of a minor pilin PilV in biofilm cohesion of Geobacter sulfurreducens

Bacterial adhesion plays a vital role in forming and shaping the structure of electroactive biofilms that are essential for the performance of bioelectrochemical systems (BESs). Type IV pili are known to mediate cell adhesion in many Gram-negative bacteria, but the mechanism of pili-mediated cell adhesion of Geobacter species on anode surface remains unclear. Herein, a minor pilin PilV2 was found to be essential for cell adhesion ability of Geobacter sulfurreducens since the lack of pilV2 gene depressed the cell adhesion capability by 81.2% in microplate and the anodic biofilm density by 23.1 % at -0.1 V and 37.7 % at -0.3 V in BESs. The less cohesiveness of mutant biofilms increased the charge transfer resistance and biofilm resistance, which correspondingly lowered current generation of the pilV2-deficient strain by up to 63.2 % compared with that of the wild-type strain in BESs. The deletion of pilV2 posed an insignificant effect on the production of extracellular polysaccharides, pili, extracellular cytochromes and electron shuttles that are involved in biofilm formation or extracellular electron transfer (EET) process. This study demonstrated the significance of pilV2 gene in cell adhesion and biofilm formation of G. sulfurreducens, as well as the importance of pili-mediated adhesion for EET of electroactive biofilm.

Influence of support materials on the electroactive behavior, structure and gene expression of wild type and GSU1771-deficient mutant of Geobacter sulfurreducens biofilms

Geobacter sulfurreducens DL1 is a metal-reducing dissimilatory bacterium frequently used to produce electricity in bioelectrochemical systems (BES). The biofilm formed on electrodes is one of the most important factors for efficient electron transfer; this is possible due to the production of type IV pili and c-type cytochromes that allow it to carry out extracellular electron transfer (EET) to final acceptors. In this study, we analyzed the biofilm formed on different support materials (glass, hematite (Fe2O3) on glass, fluorine-doped tin oxide (FTO) semiconductor glass, Fe2O3 on FTO, graphite, and stainless steel) by G. sulfurreducens DL1 (WT) and GSU1771-deficient strain mutant (Δgsu1771). GSU1771 is a transcriptional regulator that controls the expression of several genes involved in electron transfer. Different approaches and experimental tests were carried out with the biofilms grown on the different support materials including structure analysis by confocal laser scanning microscopy (CLSM), characterization of electrochemical activity, and quantification of relative gene expression by RT-qPCR. The gene expression of selected genes involved in EET was analyzed, observing an overexpression of pgcA, omcS, omcM, and omcF from Δgsu1771 biofilms compared to those from WT, also the overexpression of the epsH gene, which is involved in exopolysaccharide synthesis. Although we observed that for the Δgsu1771 mutant strain, the associated redox processes are similar to the WT strain, and more current is produced, we think that this could be associated with a higher relative expression of certain genes involved in EET and in the production of exopolysaccharides despite the chemical environment where the biofilm develops. This study supports that G. sulfurreducens is capable of adapting to the electrochemical environment where it grows.

Quantifying Geobacter sulfurreducens growth: A mathematical model based on acetate concentration as an oxidizing substrate

We developed a mathematical model to simulate dynamics associated with the proliferation of Geobacter and ultimately optimize cellular operation by analyzing the interaction of its components. The model comprises two segments: an initial part comprising a logistic form and a subsequent segment that incorporates acetate oxidation as a saturation term for the microbial nutrient medium. Given that four parameters can be obtained by minimizing the square root of the mean square error between experimental Geobacter growth and the mathematical model, the model underscores the importance of incorporating nonlinear terms. The determined parameter values closely align with experimental data, providing insights into the mechanisms that govern Geobacter proliferation. Furthermore, the model has been transformed into a scaleless equation with only two parameters to simplify the exploration of qualitative properties. This allowed us to conduct stability analysis of the fixed point and construct a co-dimension two bifurcation diagram.

Lack of physiological evidence for cytochrome filaments functioning as conduits for extracellular electron transfer

Extracellular cytochrome filaments are proposed to serve as conduits for long-range extracellular electron transfer. The primary functional physiological evidence has been the reported inhibition of Geobacter sulfurreducens Fe(III) oxide reduction when the gene for the filament-forming cytochrome OmcS is deleted. Here we report that the OmcS-deficient strain from that original report reduces Fe(III) oxide as well as the wild-type, as does a triple mutant in which the genes for the other known filament-forming cytochromes were also deleted. The triple cytochrome mutant displayed filaments with the same 3 nm diameter morphology and conductance as those produced by Escherichia coli heterologously expressing the G. sulfurreducens PilA pilin gene. Fe(III) oxide reduction was inhibited when the pilin gene in cytochrome-deficient mutants was modified to yield poorly conductive 3 nm diameter filaments. The results are consistent with the concept that 3 nm diameter electrically conductive pili (e-pili) are required for G. sulfurreducens long-range extracellular electron transfer. In contrast, rigorous physiological functional evidence is lacking for cytochrome filaments serving as conduits for long-range electron transport.

IMPORTANCE

Unraveling microbial extracellular electron transfer mechanisms has profound implications for environmental processes and advancing biological applications. This study on Geobacter sulfurreducens challenges prevailing beliefs on cytochrome filaments as crucial components thought to facilitate long-range electron transport. The discovery of an OmcS-deficient strain's unexpected effectiveness in Fe(III) oxide reduction prompted a reevaluation of the key conduits for extracellular electron transfer. By exploring the impact of genetic modifications on G. sulfurreducens' performance, this research sheds light on the importance of 3-nm diameter electrically conductive pili in Fe(III) oxide reduction. Reassessing these mechanisms is essential for uncovering the true drivers of extracellular electron transfer in microbial systems, offering insights that could revolutionize applications across diverse fields.

Widespread extracellular electron transfer pathways for charging microbial cytochrome OmcS nanowires via periplasmic cytochromes PpcABCDE

Extracellular electron transfer (EET) via microbial nanowires drives globally-important environmental processes and biotechnological applications for bioenergy, bioremediation, and bioelectronics. Due to highly-redundant and complex EET pathways, it is unclear how microbes wire electrons rapidly (>106 s-1) from the inner-membrane through outer-surface nanowires directly to an external environment despite a crowded periplasm and slow (<105 s-1) electron diffusion among periplasmic cytochromes. Here, we show that Geobacter sulfurreducens periplasmic cytochromes PpcABCDE inject electrons directly into OmcS nanowires by binding transiently with differing efficiencies, with the least-abundant cytochrome (PpcC) showing the highest efficiency. Remarkably, this defined nanowire-charging pathway is evolutionarily conserved in phylogenetically-diverse bacteria capable of EET. OmcS heme reduction potentials are within 200 mV of each other, with a midpoint 82 mV-higher than reported previously. This could explain efficient EET over micrometres at ultrafast (<200 fs) rates with negligible energy loss. Engineering this minimal nanowire-charging pathway may yield microbial chassis with improved performance.

Stimulating bioelectric generation and recovery of toxic metals through benthic microbial fuel cell driven by local sago (Cycas revoluta) waste

Benthic microbial fuel cell (BMFC) is the most promising type of bioelectrochemical approach for producing electrons and protons from natural organic waste. In the present work, a single-chamber BMFC was used, containing sago (Cycas revoluta) waste as the organic feed for microorganisms. The local wastewater was supplemented with heavy metal ions (Pb2+, Cd2+, Cr3+, Ni2+, Co2+, Ag+, and Cu2+) and used as an inoculation source to evaluate the performance of BMFC against the toxic metal remediations. According to the experimental results, the maximum power density obtained was 42.55 mW/m2 within 25 days of the BMFC operation. The maximum remediation efficiency of the metal ion removal from the wastewater was found to be 99.30% (Ag+). The conductive pili-type bacteria species (Acinetobacter species, Leucobacter species, Bacillus species, Proteus species. and Klebsiella pneumoniae) were found in the present study during isolation and identification processes. This study's multiple parameter optimization revealed that pH 7 and room temperature is the best condition for optimal performance. Finally, this study included the mechanism, future recommendations, and concluding remarks.

Bioelectrocatalytic Synthesis: Concepts and Applications

Bioelectrocatalytic synthesis is the conversion of electrical energy into value-added products using biocatalysts. These methods merge the specificity and selectivity of biocatalysis and energy-related electrocatalysis to address challenges in the sustainable synthesis of pharmaceuticals, commodity chemicals, fuels, feedstocks and fertilizers. However, the specialized experimental setups and domain knowledge for bioelectrocatalysis pose a significant barrier to adoption. This review introduces key concepts of bioelectrosynthetic systems. We provide a tutorial on the methods of biocatalyst utilization, the setup of bioelectrosynthetic cells, and the analytical methods for assessing bioelectrocatalysts. Key applications of bioelectrosynthesis in ammonia production and small-molecule synthesis are outlined for both enzymatic and microbial systems. This review serves as a necessary introduction and resource for the non-specialist interested in bioelectrosynthetic research.

Global transcriptional analysis of Geobacter sulfurreducens gsu1771 mutant biofilm grown on two different support structures

Electroactive biofilms formation by the metal-reducing bacterium Geobacter sulfurreducens is a step crucial for bioelectricity generation and bioremediation. The transcriptional regulator GSU1771 controls the expression of essential genes involved in electron transfer and biofilm formation in G. sulfurreducens, with GSU1771-deficient producing thicker and more electroactive biofilms. Here, RNA-seq analyses were conducted to compare the global gene expression patterns of wild-type and Δgsu1771 mutant biofilms grown on non-conductive (glass) and conductive (graphite electrode) materials. The Δgsu1771 biofilm grown on the glass surface exhibited 467 differentially expressed (DE) genes (167 upregulated and 300 downregulated) versus the wild-type biofilm. In contrast, the Δgsu1771 biofilm grown on the graphite electrode exhibited 119 DE genes (79 upregulated and 40 downregulated) versus the wild-type biofilm. Among these DE genes, 67 were also differentially expressed in the Δgsu1771 biofilm grown on glass (56 with the same regulation and 11 exhibiting counter-regulation). Among the upregulated genes in the Δgsu1771 biofilms, we identified potential target genes involved in exopolysaccharide synthesis (gsu1961-63, gsu1959, gsu1972-73, gsu1976-77). RT-qPCR analyses were then conducted to confirm the differential expression of a selection of genes of interest. DNA-protein binding assays demonstrated the direct binding of the GSU1771 regulator to the promoter region of pgcA, pulF, relA, and gsu3356. Furthermore, heme-staining and western blotting revealed an increase in c-type cytochromes including OmcS and OmcZ in Δgsu1771 biofilms. Collectively, our findings demonstrated that GSU1771 is a global regulator that controls extracellular electron transfer and exopolysaccharide synthesis in G. sulfurreducens, which is crucial for electroconductive biofilm development.

Mechanisms of magnetic sensing and regulating extracellular electron transfer of electroactive bacteria under magnetic fields

Electroactive bacteria can display notable plasticity in their response to magnetic field (MF), which prompted bioelectrochemical system as promising candidates for magnetic sensor applications. In this study, we explored the sensing and stimulatory effect of MF on current generation by Geobacter sulfurreducens, and elucidated the related molecular mechanism at the transcriptomic level. MF treatment significantly enhanced electricity generation and overall energy efficiency of G. sulfurreducens by 50 % and 22 %, respectively. The response of current to MFs was instantaneous and reversible. Cyclic voltammetry analysis of the anode biofilm revealed that the redox couples changed from -0.31 to -0.39 V (vs. Ag/AgCl), suggesting that MFs could alter electron transfer related components. Differential gene expression analysis further verified this hypothesis, genes associated with electron transfer were upregulated in G. sulfurreducens under MF treatment relative to the control group, specifically, genes encoding periplasmic c-type cytochromes (ppcA and ppcD), outer membrane cytochrome (omcF, omcZ, omcB), pili (pilA-C, pilM, and pilV2), and ribosome. The enhanced bacterial extracellular electron transfer process was also linked to the overexpression of the NADH dehydrogenase I subunit, the ABC transporter, transcriptional regulation, and ATP synthase. Overall, our findings shed light on the molecular mechanism underlying the effects of magnetic field stimuli on EAB and provide a theoretical basis for its further application in magnetic sensors and other biological system.

The varied roles of pilA-N, omcE, omcS, omcT, and omcZ in extracellular electron transfer by Geobacter sulfurreducens

Geobacter sulfurreducens mediates extracellular electron transfer (EET) reactions with different substrates, such as solid-phase Fe(III)-containing minerals, anodes and the cells of Geobacter metallireducens. To compare their roles in EET, the pilA-N, omcE, omcS, omcT and omcZ genes of G. sulfurreducens were systematically deleted. All mutants showed impaired and varied ability to form biofilms on nonconductive surface. Deletion of omcE also impaired bacterial ability to reduce ferrihydrite, but its impacts on the ability for anode reduction and the co-culture of G. metallireducens-G. sulfurreducens were minimal. The mutant without omcS showed diminished ability to reduce ferrihydrite and to form the co-culture, but was able to regain its ability to reduce anodes. Deletion of omcT, omcZ or pilA-N alone impaired bacterial ability to reduce ferrihydrite and anodes and to form the co-culture. Deletion of all tested genes abolished bacterial ability to reduce ferrihydrite and anodes. Triple-deletion of all omcS, omcT and omcZ abolished the ability of G. sulfurreducens to co-culture with G. metallireducens. However, deletion of only omcZ or pilA-N or both omcS and omcT abolished the ability of G. sulfurreducens without hydrogenase gene hybL to co-culture with G. metallireducens, which show their indispensable roles in direct electron transfer from G. metallireducens to G. sulfurreducens. Thus, the roles of pilA-N, omcE, omcS, omcT and omcZ for G. sulfurreducens in EET vary substantially, which also suggest that possession of PilA-N and multiple cytochromes of different structures enables G. sulfurreducens to mediate EET reactions efficiently with substrates of different properties.

Cytochrome gene expression shifts in Geobacter sulfurreducens to maximize energy conservation in response to changes in redox conditions

Previous studies have identified that Geobacter sulfurreducens has three different electron transfer pathways for respiration, and it switches between these pathways to adapt to the redox potential of its electron acceptor. However, only a small fraction of the electron carriers from each pathway have been identified. In this study, we combined electrochemical and gene expression data to identify electron carriers in the inner membrane, periplasm, outer membrane, and exterior of the cell that may be induced by the use of the three different electron transfer pathways. Cyclic voltammetry was performed on thin biofilms grown on anodes poised at different redox potentials, providing a quantitative assessment of the relative use of three electron-transfer pathways in each condition (catalytic midpoint potentials (EKAs) of -0.227 V [Low], -0.15 V [Medium], -0.1 V [High] vs. SHE). Transcriptomic analyses as a function of electrochemical signals or fumarate utilization showed differential induction in inner membrane (Medium: cbcL), periplasmic (Low: ppcB/ppcE, Medium: ppcA), outer membrane (Low: extA/extC, Medium: extJ/extK, Fumarate: extF/extG), and extracellular (Medium: omcZ, High/Fumarate: omcS/omcT) cytochromes, suggesting the pathway signals are associated with complex transcriptomic responses in genes across the electron transfer pathway. Our method combining electrochemical modeling and transcriptomics could be adapted to better understand electron transport in other electroactive organisms with complex metabolisms.

Multi-heme cytochrome-mediated extracellular electron transfer by the anaerobic methanotroph 'Candidatus Methanoperedens nitroreducens'

Anaerobic methanotrophic archaea (ANME) carry out anaerobic oxidation of methane, thus playing a crucial role in the methane cycle. Previous genomic evidence indicates that multi-heme c-type cytochromes (MHCs) may facilitate the extracellular electron transfer (EET) from ANME to different electron sinks. Here, we provide experimental evidence supporting cytochrome-mediated EET for the reduction of metals and electrodes by 'Candidatus Methanoperedens nitroreducens', an ANME acclimated to nitrate reduction. Ferrous iron-targeted fluorescent assays, metatranscriptomics, and single-cell imaging suggest that 'Ca. M. nitroreducens' uses surface-localized redox-active cytochromes for metal reduction. Electrochemical and Raman spectroscopic analyses also support the involvement of c-type cytochrome-mediated EET for electrode reduction. Furthermore, several genes encoding menaquinone cytochrome type-c oxidoreductases and extracellular MHCs are differentially expressed when different electron acceptors are used.

Electron Transfer Beyond the Outer Membrane: Putting Electrons to Rest

Extracellular electron transfer (EET) is the physiological process that enables the reduction or oxidation of molecules and minerals beyond the surface of a microbial cell. The first bacteria characterized with this capability were Shewanella and Geobacter, both reported to couple their growth to the reduction of iron or manganese oxide minerals located extracellularly. A key difference between EET and nearly every other respiratory activity on Earth is the need to transfer electrons beyond the cell membrane. The past decade has resolved how well-conserved strategies conduct electrons from the inner membrane to the outer surface. However, recent data suggest a much wider and less well understood collection of mechanisms enabling electron transfer to distant acceptors. This review reflects the current state of knowledge from Shewanella and Geobacter, specifically focusing on transfer across the outer membrane and beyond-an activity that enables reduction of highly variable minerals, electrodes, and even other organisms.

Bioenergy Generation and Phenol Degradation through Microbial Fuel Cells Energized by Domestic Organic Waste

Microbial fuel cells (MFCs) seem to have emerged in recent years to degrade the organic pollutants from wastewater. The current research also focused on phenol biodegradation using MFCs. According to the US Environmental Protection Agency (EPA), phenol is a priority pollutant to remediate due to its potential adverse effects on human health. At the same time, the present study focused on the weakness of MFCs, which is the low generation of electrons due to the organic substrate. The present study used rotten rice as an organic substrate to empower the MFC's functional capacity to degrade the phenol while simultaneously generating bioenergy. In 19 days of operation, the phenol degradation efficiency was 70% at a current density of 17.10 mA/m² and a voltage of 199 mV. The electrochemical analysis showed that the internal resistance was 312.58 Ω and the maximum specific capacitance value was 0.00020 F/g on day 30, which demonstrated mature biofilm production and its stability throughout the operation. The biofilm study and bacterial identification process revealed that the presence of conductive pili species (Bacillus genus) are the most dominant on the anode electrode. However, the present study also explained well the oxidation mechanism of rotten rice with phenol degradation. The most critical challenges for future recommendations are also enclosed in a separate section for the research community with concluding remarks.

Recent advances in enrichment, isolation, and bio-electrochemical activity evaluation of exoelectrogenic microorganisms

Exoelectrogenic microorganisms (EEMs) catalyzed the conversion of chemical energy to electrical energy via extracellular electron transfer (EET) mechanisms, which underlay diverse bio-electrochemical systems (BES) applications in clean energy development, environment and health monitoring, wearable/implantable devices powering, and sustainable chemicals production, thereby attracting increasing attentions from academic and industrial communities in the recent decades. However, knowledge of EEMs is still in its infancy as only ~100 EEMs of bacteria, archaea, and eukaryotes have been identified, motivating the screening and capture of new EEMs. This review presents a systematic summarization on EEM screening technologies in terms of enrichment, isolation, and bio-electrochemical activity evaluation. We first generalize the distribution characteristics of known EEMs, which provide a basis for EEM screening. Then, we summarize EET mechanisms and the principles underlying various technological approaches to the enrichment, isolation, and bio-electrochemical activity of EEMs, in which a comprehensive analysis of the applicability, accuracy, and efficiency of each technology is reviewed. Finally, we provide a future perspective on EEM screening and bio-electrochemical activity evaluation by focusing on (i) novel EET mechanisms for developing the next-generation EEM screening technologies, and (ii) integration of meta-omics approaches and bioinformatics analyses to explore nonculturable EEMs. This review promotes the development of advanced technologies to capture new EEMs.

In Situ Enhanced Yields of Microbial Nanowires: The Key Role of Environmental Stress

The conductive microbial nanowires of Geobacter sulfurreducens serve as a model for long-range extracellular electron transfer (EET), which is considered a revolutionary "green" nanomaterial in the fields of bioelectronics, renewable energy, and bioremediation. However, there is no efficient pathway to induce microorganisms to express a large amount of microbial nanowires. Here, several strategies have been used to successfully induce the expression of microbial nanowires. Microbial nanowire expression was closely related to the concentration of electron acceptors. The microbial nanowire was around 17.02 μm in length, more than 3 times compared to its own length. The graphite electrode was used as an alternative electron acceptor by G. sulfurreducens, which obtained a fast start-up time of 44 h in microbial fuel cells (MFCs). Meanwhile, Fe(III) citrate-coated sugarcane carbon and biochar were prepared to test the applicability of these strategies in the actual microbial community. The unsatisfied EET efficiency between c-type cytochrome and extracellular insoluble electron receptors promoted the expression of microbial nanowires. Hence, microbial nanowires were proposed to be an effective survival strategy for G. sulfurreducens to cope with various environmental stresses. Based on this top-down strategy of artificially constructed microbial environmental stress, this study is of great significance for exploring more efficient methods to induce microbial nanowires expression.

Biophotoelectrochemical process co-driven by dead microalgae and live bacteria

Anaerobic reduction processes in natural waters can be promoted by dead microalgae that have been attributed to nutrient substances provided by the decomposition of dead microalgae for other microorganisms. However, previous reports have not considered that dead microalgae may also serve as photosensitizers to drive microbial reduction processes. Here we demonstrate a photoelectric synergistic linkage between dead microalgae and bacteria capable of extracellular electron transfer (EET). Illumination of dead Raphidocelis subcapitata resulted in two-fold increase in the rate of anaerobic bioreduction by pure Geobacter sulfurreducens, suggesting that photoelectrons generated from the illuminated dead microalgae were transferred to the EET-capable microorganisms. Similar phenomena were observed in NO3- reduction driven by irradiated dead Chlorella vulgaris and living Shewanella oneidensis, and Cr(VI) reduction driven by irradiated dead Raphidocelis subcapitata and living Bacillus subtilis. Enhancement of bioreduction was also seen when the killed microalgae were illuminated in mixed-culture lake water, suggesting that EET-capable bacteria were naturally present and this phenomenon is common in post-bloom systems. The intracellular ferredoxin-NADP+-reductase is inactivated in the dead microalgae, allowing the production and extracellular transfer of photoelectrons. The use of mutant strains confirmed that the electron transport pathway requires multiheme cytochromes. Taken together, these results suggest a heretofore overlooked biophotoelectrochemical process jointly mediated by illumination of dead microalgae and live EET-capable bacteria in natural ecosystems, which may add an important component in the energetics of bioreduction phenomena particularly in microalgae-enriched environments.

Nitrogen Fixation and Ammonium Assimilation Pathway Expression of Geobacter sulfurreducens Changes in Response to the Anode Potential in Microbial Electrochemical Cells

Nitrogen gas (N2) fixation in the anode-respiring bacterium Geobacter sulfurreducens occurs through complex, multistep processes. Optimizing ammonium (NH4+) production from this bacterium in microbial electrochemical technologies (METs) requires an understanding of how those processes are regulated in response to electrical driving forces. In this study, we quantified gene expression levels (via RNA sequencing) of G. sulfurreducens growing on anodes fixed at two different potentials (-0.15 V and +0.15 V versus standard hydrogen electrode). The anode potential had a significant impact on the expression levels of N2 fixation genes. At -0.15 V, the expression of nitrogenase genes, such as nifH, nifD, and nifK, significantly increased relative to that at +0.15 V, as well as genes associated with NH4+ uptake and transformation, such as glutamine and glutamate synthetases. Metabolite analysis confirmed that both of these organic compounds were present in significantly higher intracellular concentrations at -0.15 V. N2 fixation rates (estimated using the acetylene reduction assay and normalized to total protein) were significantly larger at -0.15 V. Genes expressing flavin-based electron bifurcation complexes, such as electron-transferring flavoproteins (EtfAB) and the NADH-dependent ferredoxin:NADP reductase (NfnAB), were also significantly upregulated at -0.15 V, suggesting that these mechanisms may be involved in N2 fixation at that potential. Our results show that in energy-constrained situations (i.e., low anode potential), the cells increase per-cell respiration and N2 fixation rates. We hypothesize that at -0.15 V, they increase N2 fixation activity to help maintain redox homeostasis, and they leverage electron bifurcation as a strategy to optimize energy generation and use. IMPORTANCE Biological nitrogen fixation coupled with ammonium recovery provides a sustainable alternative to the carbon-, water-, and energy-intensive Haber-Bosch process. Aerobic biological nitrogen fixation technologies are hindered by oxygen gas inhibition of the nitrogenase enzyme. Electrically driving biological nitrogen fixation in anaerobic microbial electrochemical technologies overcomes this challenge. Using Geobacter sulfurreducens as a model exoelectrogenic diazotroph, we show that the anode potential in microbial electrochemical technologies has a significant impact on nitrogen gas fixation rates, ammonium assimilation pathways, and expression of genes associated with nitrogen gas fixation. These findings have important implications for understanding regulatory pathways of nitrogen gas fixation and will help identify target genes and operational strategies to enhance ammonium production in microbial electrochemical technologies.

Enhancing electrical outputs of the fuel cells with Geobacter sulferreducens by overexpressing nanowire proteins

Protein nanowires are critical electroactive components for electron transfer of Geobacter sulfurreducens biofilm. To determine the applicability of the nanowire proteins in improving bioelectricity production, their genes including pilA, omcZ, omcS and omcT were overexpressed in G. sulfurreducens. The voltage outputs of the constructed strains were higher than that of the control strain with the empty vector (0.470-0.578 vs. 0.355 V) in microbial fuel cells (MFCs). As a result, the power density of the constructed strains (i.e. 1.39-1.58 W m^-2 ) also increased by 2.62- to 2.97-fold as compared to that of the control strain. Overexpression of nanowire proteins also improved biofilm formation on electrodes with increased protein amount and thickness of biofilms. The normalized power outputs of the constructed strains were 0.18-0.20 W g^-1 that increased by 74% to 93% from that of the control strain. Bioelectrochemical analyses further revealed that the biofilms and MFCs with the constructed strains had stronger electroactivity and smaller internal resistance, respectively. Collectively, these results demonstrate for the first time that overexpression of nanowire proteins increases the biomass and electroactivity of anode-attached microbial biofilms. Moreover, this study provides a new way for enhancing the electrical outputs of MFCs.

Periodic step polarization accelerates electron recovery by electroactive biofilms (EABs)

Relatively low rate of electron recovery is one of the factors that limit the advancement of bioelectrochemical systems. Here, new periodic polarizations were investigated with electroactive biofilms (EABs) enriched from activated sludge and Geobacter sulfurreducens biofilms. When representative anode potentials (E_a ) were applied, redox centers with midpoint potentials (E_mid ) higher than E_a were identified by localized cyclic voltammetry. The electrons held by these redox centers were accessible when E_a was raised to 0.4 V (vs. Ag/AgCl). New periodic polarizations that discharge at 0.4 V recovered electrons faster than normal periodic and fixed-potential polarizations. The best-performing periodic step polarization accelerated electron recovery by 23%-24% and 12%-76% with EABs and G. sulfurreducens biofilms, respectively, compared to the fixed-potential polarization. Quantitative reverse transcription polymerase chain reaction showed an increased abundance of omcZ mRNA transcripts from G. sulfurreducens after periodic step polarization. Therefore, both the rate of energy recovery by EABs and the performance of bioelectrochemical systems can be enhanced by improving the polarization schemes.

Optimization of biofilm conductance measurement with two-electrode microbial electrochemical cells (MECs)

This study was conducted to develop a standardized and consistent method for biofilm conductance measurement for an improved comprehension of extracellular electron transfer. Biofilm conductance (2.12 ± 0.25 × 10^-4 S) with and without a fixed anode potential did not show significant difference. The conductance showed a sigmoidal relationship with anode potential. The current-voltage profile of the tested biofilm at applied voltage larger than 100 mV showed deviation from Ohm's law. Up to 69% decrease in biofilm conductance and deviation from Ohm's law were observed in the current-voltage profile when the measurement time increased. By choosing the voltage range (0- 100 mV) and step (25 mV), measurement time (100-s at each voltage step), and anode control mode, these operation settings were found more suitable for consistent and accurate biofilm conductance measurement in the 2-Au MEC system. This represents the first study that comprehensively evaluated the environmental and instrumental parameters for biofilm conductance measurement.

Structure of Geobacter cytochrome OmcZ identifies mechanism of nanowire assembly and conductivity

OmcZ nanowires produced by Geobacter species have high electron conductivity (>30 S cm-1). Of 111 cytochromes present in G. sulfurreducens, OmcZ is the only known nanowire-forming cytochrome essential for the formation of high-current-density biofilms that require long-distance (>10 µm) extracellular electron transport. However, the mechanisms underlying OmcZ nanowire assembly and high conductivity are unknown. Here we report a 3.5-Å-resolution cryogenic electron microscopy structure for OmcZ nanowires. Our structure reveals linear and closely stacked haems that may account for conductivity. Surface-exposed haems and charge interactions explain how OmcZ nanowires bind to diverse extracellular electron acceptors and how organization of nanowire network re-arranges in different biochemical environments. In vitro studies explain how G. sulfurreducens employ a serine protease to control the assembly of OmcZ monomers into nanowires. We find that both OmcZ and serine protease are widespread in environmentally important bacteria and archaea, thus establishing a prevalence of nanowire biogenesis across diverse species and environments.

Geobacter sulfurreducens' Unique Metabolism Results in Cells with a High Iron and Lipid Content

Geobacter sulfurreducens is a ubiquitous iron-reducing bacterium in soils, and in engineered systems, it can respire an electrode to produce measurable electric current. Its unique metabolism, heavily dependent on an extensive network of cytochromes, requires a unique cell composition. In this work, we used metallomics, cell fraction and elemental analyses, and transcriptomics to study and analyze the cell composition of G. sulfurreducens. Elemental composition studies (C, H, O, N, and ash content) showed high C:O and H:O ratios of approximately 1.7:1 and 0.25:1, indicative of more reduced cell composition that is consistent with high lipid content. Our study shows that G. sulfurreducens cells have a large amount of iron (2 ± 0.2 μg/g dry weight) and lipids (32 ± 0.5% dry weight/dry weight) and that this composition does not change whether the cells are grown with a soluble or an insoluble electron acceptor. The high iron concentration, higher than similar microorganisms, is attributed to the production of cytochromes that are abundant in transcriptomic analyses in both solid and soluble electron acceptor growth. The unique cell composition of G. sulfurreducens must be considered when growing this microorganism for lab studies and commercial applications. IMPORTANCE Geobacter sulfurreducens is an electroactive microorganism. In nature, it grows on metallic minerals by transferring electrons to them, effectively "breathing" metals. In a manmade system, it respires an electrode to produce an electric current. It has become a model organism for the study of electroactive organisms. There are potential biotechnological applications of an organism that can bridge the gap between biology and electrical signal and, as a ubiquitous iron reducer in soils around the world, G. sulfurreducens has an impact on the global iron cycle. We measured the concentrations of metals, macromolecules, and basic elements in G. sulfurreducens to define this organism's composition. We also used gene expression data to discuss which proteins those metals could be associated with. We found that G. sulfurreducens has a large amount of lipid and iron compared to other bacteria-these observations are important for future microbiologists and biotechnologists working with the organism.

Detoxification mechanisms of electroactive microorganisms under toxicity stress: A review

Remediation of environmental toxic pollutants has attracted extensive attention in recent years. Microbial bioremediation has been an important technology for removing toxic pollutants. However, microbial activity is also susceptible to toxicity stress in the process of intracellular detoxification, which significantly reduces microbial activity. Electroactive microorganisms (EAMs) can detoxify toxic pollutants extracellularly to a certain extent, which is related to their unique extracellular electron transfer (EET) function. In this review, the extracellular and intracellular aspects of the EAMs’ detoxification mechanisms are explored separately. Additionally, various strategies for enhancing the effect of extracellular detoxification are discussed. Finally, future research directions are proposed based on the bottlenecks encountered in the current studies. This review can contribute to the development of toxic pollutants remediation technologies based on EAMs, and provide theoretical and technical support for future practical engineering applications.

Synthetic Biology Toolbox, Including a Single-Plasmid CRISPR-Cas9 System to Biologically Engineer the Electrogenic, Metal-Resistant Bacterium Cupriavidus metallidurans CH34

Cupriavidus metallidurans CH34 exhibits extraordinary metabolic versatility, including chemolithoautotrophic growth; degradation of BTEX (benzene, toluene, ethylbenzene, xylene); high resistance to numerous metals; biomineralization of gold, platinum, silver, and uranium; and accumulation of polyhydroxybutyrate (PHB). These qualities make it a valuable host for biotechnological applications such as bioremediation, bioprocessing, and the generation of bioelectricity in microbial fuel cells (MFCs). However, the lack of genetic tools for strain development and studying its fundamental physiology represents a bottleneck to boosting its commercial applications. In this study, inducible and constitutive promoter libraries were built and characterized, providing the first comprehensive list of biological parts that can be used to regulate protein expression and optimize the CRISPR-Cas9 genome editing tools for this host. A single-plasmid CRISPR-Cas9 system that can be delivered by both conjugation and electroporation was developed, and its efficiency was demonstrated by successfully targeting the pyrE locus. The CRISPR-Cas9 system was next used to target candidate genes encoding type IV pili, hypothesized by us to be involved in extracellular electron transfer (EET) in this organism. Single and double deletion strains (ΔpilA, ΔpilE, and ΔpilAE) were successfully generated. Additionally, the CRISPR-Cas9 tool was validated for constructing genomic insertions (ΔpilAE::gfp and ΔpilAE::λ_Prgfp). Finally, as type IV pili are believed to play an important role in extracellular electron transfer to solid surfaces, C. metallidurans CH34 ΔpilAE was further studied by means of cyclic voltammetry using disposable screen-printed carbon electrodes. Under these conditions, we demonstrated that C. metallidurans CH34 could generate extracellular currents; however, no difference in the intensity of the current peaks was found in the ΔpilAE double deletion strain when compared to the wild type. This finding suggests that the deleted type IV pili candidate genes are not involved in extracellular electron transfer under these conditions. Nevertheless, these experiments revealed the presence of different redox centers likely to be involved in both mediated electron transfer (MET) and direct electron transfer (DET), the first interpretation of extracellular electron transfer mechanisms in C. metallidurans CH34.

Biomolecular Insights into Extracellular Pollutant Reduction Pathways of Geobacter sulfurreducens Using a Base Editor System

Geobacter species are critically involved in elemental biogeochemical cycling and environmental bioremediation processes via extracellular electron transfer (EET), but the underlying biomolecular mechanisms remain elusive due to lack of effective analytical tools to explore into complicated EET networks. Here, a simple and highly efficient cytosine base editor was developed for engineering of the slow-growing Geobacter sulfurreducens (a doubling time of 5 h with acetate as the electron donor and fumarate as the electron acceptor). A single-plasmid cytosine base editor (pYYDT-BE) was constructed in G. sulfurreducens by fusing cytosine deaminase, Cas9 nickase, and a uracil glycosylase inhibitor. This system enabled single-locus editing at 100% efficiency and showed obvious preference at the cytosines in a TC, AC, or CC context than in a GC context. Gene inactivation tests confirmed that it could effectively edit 87.7-93.4% genes of the entire genome in nine model Geobacter species. With the aid of this base editor to construct a series of G. sulfurreducens mutants, we unveiled important roles of both pili and outer membrane c-type cytochromes in long-range EET, thereby providing important evidence to clarify the long-term controversy surrounding their specific roles. Furthermore, we find that pili were also involved in the extracellular reduction of uranium and clarified the key roles of the ExtHIJKL conduit complex and outer membrane c-type cytochromes in the selenite reduction process. This work developed an effective base editor tool for the genetic modification of Geobacter species and provided new insights into the EET network, which lay a basis for a better understanding and engineering of these microbes to favor environmental applications.

Structure of Geobacter OmcZ filaments suggests extracellular cytochrome polymers evolved independently multiple times

While early genetic and low-resolution structural observations suggested that extracellular conductive filaments on metal-reducing organisms such as Geobacter were composed of type IV pili, it has now been established that bacterial c-type cytochromes can polymerize to form extracellular filaments capable of long-range electron transport. Atomic structures exist for two such cytochrome filaments, formed from the hexaheme cytochrome OmcS and the tetraheme cytochrome OmcE. Due to the highly conserved heme packing within the central OmcS and OmcE cores, and shared pattern of heme coordination between subunits, it has been suggested that these polymers have a common origin. We have now used cryo-electron microscopy (cryo-EM) to determine the structure of a third extracellular filament, formed from the Geobacter sulfurreducens octaheme cytochrome, OmcZ. In contrast to the linear heme chains in OmcS and OmcE from the same organism, the packing of hemes, heme:heme angles, and between-subunit heme coordination is quite different in OmcZ. A branched heme arrangement within OmcZ leads to a highly surface exposed heme in every subunit, which may account for the formation of conductive biofilm networks, and explain the higher measured conductivity of OmcZ filaments. This new structural evidence suggests that conductive cytochrome polymers arose independently on more than one occasion from different ancestral multiheme proteins.

Different outer membrane c-type cytochromes are involved in direct interspecies electron transfer to Geobacter or Methanosarcina species

Direct interspecies electron transfer (DIET) may be most important in methanogenic environments, but mechanistic studies of DIET to date have primarily focused on cocultures in which fumarate was the terminal electron acceptor. To better understand DIET with methanogens, the transcriptome of Geobacter metallireducens during DIET-based growth with G. sulfurreducens reducing fumarate was compared with G. metallireducens grown in coculture with diverse Methanosarcina. The transcriptome of G. metallireducens cocultured with G. sulfurreducens was significantly different from those with Methanosarcina. Furthermore, the transcriptome of G. metallireducens grown with Methanosarcina barkeri, which lacks outer-surface c-type cytochromes, differed from those of G. metallireducens cocultured with M. acetivorans or M. subterranea, which have an outer-surface c-type cytochrome that serves as an electrical connect for DIET. Differences in G. metallireducens expression patterns for genes involved in extracellular electron transfer were particularly notable. Cocultures with c-type cytochrome deletion mutant strains, ∆Gmet_0930, ∆Gmet_0557 and ∆Gmet_2896, never became established with G. sulfurreducens but adapted to grow with all three Methanosarcina. Two porin-cytochrome complexes, PccF and PccG, were important for DIET; however, PccG was more important for growth with Methanosarcina. Unlike cocultures with G. sulfurreducens and M. acetivorans, electrically conductive pili were not needed for growth with M. barkeri. Shewanella oneidensis, another electroactive microbe with abundant outer-surface c-type cytochromes, did not grow via DIET. The results demonstrate that the presence of outer-surface c-type cytochromes does not necessarily confer the capacity for DIET and emphasize the impact of the electron-accepting partner on the physiology of the electron-donating DIET partner.

Effect of nickel (II) on the performance of anodic electroactive biofilms in bioelectrochemical systems

The impact of nickel (Ni²⁺) on the performance of anodic electroactive biofilms (EABs) in the bioelectrochemical system (BES) was investigated in this study. Although it has been reported that Ni²⁺ influences microorganisms in a number of ways, it is unknown how its presence in the anode of a BES affects extracellular electron transfer (EET) of EABs, microbial viability, and the bacterial community. Results revealed that the addition of Ni²⁺ decreased power output from 673.24 ± 12.40 mW/m² at 0 mg/L to 179.26 ± 9.05 mW/m² at 80 mg/L. The metal and chemical oxygen demand removal efficiencies of the microbial fuel cells (MFCs) declined as Ni²⁺ concentration increased, which could be attributed to decreased microbial viability as revealed by SEM and CLSM. FTIR analysis revealed the involvement of various microbial biofilm functional groups, including hydroxyl, amides, methyl, amine, and carboxyl, in the uptake of Ni²⁺. The presence of Ni²⁺ on the anodic biofilms was confirmed by SEM-EDS and XPS analyses. CV demonstrated that the electron transfer performance of the anodic biofilms was negatively correlated with the various Ni²⁺ concentrations. EIS showed that the internal resistance of the MFCs increased with increasing Ni²⁺ concentration, resulting in a decrease in power output. High-throughput sequencing results revealed a decrease in Geobacter and an increase in Desulfovibrio in response to Ni²⁺ concentrations of 10, 20, 40, and 80 mg/L. Furthermore, the various Ni²⁺ concentrations decreased the expression of EET-related genes. The Ni²⁺-fed MFCs had a higher abundance of the nikR gene than the control group, which was important for Ni²⁺ resistance. This work advances our understanding of Ni²⁺ inhibition on EABs, as well as the concurrent removal of organic matter and Ni²⁺ from wastewater.

Cryo-EM structure of an extracellular Geobacter OmcE cytochrome filament reveals tetrahaem packing

Electrically conductive appendages from the anaerobic bacterium Geobacter sulfurreducens were first observed two decades ago, with genetic and biochemical data suggesting that conductive fibres were type IV pili. Recently, an extracellular conductive filament of G. sulfurreducens was found to contain polymerized c-type cytochrome OmcS subunits, not pilin subunits. Here we report that G. sulfurreducens also produces a second, thinner appendage comprised of cytochrome OmcE subunits and solve its structure using cryo-electron microscopy at ~4.3 Å resolution. Although OmcE and OmcS subunits have no overall sequence or structural similarities, upon polymerization both form filaments that share a conserved haem packing arrangement in which haems are coordinated by histidines in adjacent subunits. Unlike OmcS filaments, OmcE filaments are highly glycosylated. In extracellular fractions from G. sulfurreducens, we detected type IV pili comprising PilA-N and -C chains, along with abundant B-DNA. OmcE is the second cytochrome filament to be characterized using structural and biophysical methods. We propose that there is a broad class of conductive bacterial appendages with conserved haem packing (rather than sequence homology) that enable long-distance electron transport to chemicals or other microbial cells.

R-based method for quantitative analysis of biofilm thickness by using confocal laser scanning microscopy

Microscopy is mostly the method of choice to analyse biofilms. Due to the high local heterogeneity of biofilms, single and punctual analyses only give an incomplete insight into the local distribution of biofilms. In order to retrieve statistically significant results a quantitative method for biofilm thickness measurements was developed based on confocal laser scanning microscopy and the programming language R. The R-script allows the analysis of large image volumes with little hands-on work and outputs statistical information on homogeneity of surface coverage and overall biofilm thickness. The applicability of the script was shown in microbial fuel cell experiments. It was found that Geobacter sulfurreducens responds differently to poised anodes of different material so that the optimum potential for MFC on poised ITO anodes had to be identified with respect to maximum current density, biofilm thickness and MFC start-up time. Thereby, a positive correlation between current density and biofilm thickness was found, but with no direct link to the applied potential. The optimum potential turned out to be +0.1 V versus SHE. The script proved to be a valuable stand-alone tool to quantify biofilm thickness in a statistically valid manner, which is required in many studies.

S-Doped NiFe2O4 Nanosheets Regulated Microbial Community of Suspension for Constructing High Electroactive Consortia

Iron-based nanomaterials (NMs) are increasingly used to promote extracellular electron transfer (EET) for energy production in bioelectrochemical systems (BESs). However, the composition and roles of planktonic bacteria in the solution regulated by iron-based NMs have rarely been taken into account. Herein, the changes of the microbial community in the solution by S-doped NiFe₂O₄ anodes have been demonstrated and used for constructing electroactive consortia on normal carbon cloth anodes, which could achieve the same level of electricity generation as NMs-mediated biofilm, as indicated by the significantly high voltage response (0.64 V) and power density (3.5 W m⁻²), whereas with different microbial diversity and connections. Network analysis showed that the introduction of iron-based NMs made Geobacter positively interact with f_Rhodocyclaceae, improving the competitiveness of the consortium (Geobacter and f_Rhodocyclaceae). Additionally, planktonic bacteria regulated by S-doped anode alone cannot hinder the stimulation of Geobacter by electricity and acetate, while the assistance of lining biofilm enhanced the cooperation of sulfur-oxidizing bacteria (SOB) and fermentative bacteria (FB), thus promoting the electroactivity of microbial consortia. This study reveals the effect of S-doped NiFe₂O₄ NMs on the network of microbial communities in MFCs and highlights the importance of globality of microbial community, which provides a feasible solution for the safer and more economical environmental applications of NMs.

GSU1771 regulates extracellular electron transfer and electroactive biofilm formation in Geobacter sulfurreducens: Genetic and electrochemical characterization

Type IV pili and the >100c-type cytochromes in Geobacter sulfurreducens are essential for extracellular electron transfer (EET) towards metal oxides and electrodes. A previous report about a mutation in the gsu1771 gene indicated an enhanced reduction of insoluble Fe(III) oxides coupled with increased pilA expression. Herein, a marker-free gsu1771-deficient mutant was constructed and characterized to assess the role of this regulator in EET and the formation of electroactive biofilms. Deleting this gene delayed microbial growth in the acetate/fumarate media (electron donor and acceptor, respectively). However, this mutant reduced soluble and insoluble Fe(III) oxides more efficiently. Heme staining, western blot, and RT-qPCR analyses demonstrated that GSU1771 regulates the transcription of several genes (including pilA) and many c-type cytochromes involved in EET, suggesting the broad regulatory role of this protein. DNA-protein binding assays indicated that GSU1771 directly regulates the transcription of pilA, omcE, omcS, and omcZ. Additionally, gsu1771-deficient mutant biofilms are thicker than wild-type strains. Electrochemical studies revealed that the current produced by this biofilm was markedly higher than the wild-type strains (approximately 100-fold). Thus, demonstrating the role of GSU1771 in the EET pathway and establishing a methodology to develop highly electroactive G. sulfurreducens mutants.

Exopolysaccharides matrix affects the process of extracellular electron transfer in electroactive biofilm

The applications of bioelectrochemical systems (BESs) in the field of environment and energy are achieved through the bioelectrocatalytic process of electroactive biofilms. As a primary component of biofilm, the role of exopolysaccharides in electroactive biofilm in BESs is poorly understood. This study constructed an exopolysaccharides-deficient Geobacter sulfurreducens-based BES to explore the role of exopolysaccharides in electroactive biofilm. Compared with the wild type, the mutant biofilm expressing less exopolysaccharides decreased the capacity of current generation. In the mutant biofilm, the content of exopolysaccharides decreased significantly, resulting in a thinner biofilm and lower cell viability compared with the wild-type biofilm. However, the mutant with overexpressed pili developed a mature biofilm with extended time, which indicating the importance of exopolysaccharides for early biofilm formation and the compensatory role of pili in biofilm formation. The mutant biofilm had less content of c-type cytochromes (c-Cyts) and lower electrochemical activity of extracellular polymeric substances than the wild-type biofilm, suggesting a function of exopolysaccharides anchoring extracellular c-Cyts that essential to extracellular electron transfer (EET) in electroactive biofilms. Our findings demonstrated the essential role of exopolysaccharides in the process of EET in electroactive biofilm, which contributed to a better understanding and optimization of the performance of BESs.

Anode respiration-dependent biological nitrogen fixation by Geobacter sulfurreducens

The present nitrogen fixation industry is usually energy-intensive and environmentally detrimental. Therefore, it is appealing to find alternatives. Here, we achieved both a synchronized biological nitrogen fixation and electric energy production by using Geobacter sulfurreducens in a microbial electrochemical system. The results showed that G. sulfurreducens was able to fix nitrogen depending on anode respiration, producing a maximum current density of 0.17 ± 0.015 mA cm^-2 and a nitrogen-fixing activity of ca. 0.78 μmol C₂H₄ mg protein^-1 h^-1, thereby achieving a net total nitrogen-fixing rate of ca. 5.6 mg L^-1 day^-1. Specifically, nitrogen fixation did not impair coulombic efficiency. Transcriptomic and metabolic analyses demonstrated that anode respiration provided sufficient energy to drive nitrogen fixation, and in turn nitrogen fixation promoted anode respiration of the cell by increasing acetate catabolism but reducing acetate anabolism. Furthermore, we showed that G. sulfurreducens could be supplied in a bioelectrochemical system for N-deficient wastewater treatment to relieve N-deficiency stress contributing to the formation of an electroactive biofilm, thereby simultaneously achieving nitrogen fixation, current generation and dissoluble organic carbon removal. Our study revealed a synergistic effect between biological nitrogen fixation and current generation by G. sulfurreducens, providing a green nitrogen fixation alternative through shifting the nitrogen fixation field from energy consumption to energy production and having implications for N-deficient wastewater treatment.

Biofilm Biology and Engineering of Geobacter and Shewanella spp. for Energy Applications

Geobacter and Shewanella spp. were discovered in late 1980s as dissimilatory metal-reducing microorganisms that can transfer electrons from cytoplasmic respiratory oxidation reactions to external metal-containing minerals. In addition to mineral-based electron acceptors, Geobacter and Shewanella spp. also can transfer electrons to electrodes. The microorganisms that have abilities to transfer electrons to electrodes are known as exoelectrogens. Because of their remarkable abilities of electron transfer, Geobacter and Shewanella spp. have been the two most well studied groups of exoelectrogens. They are widely used in bioelectrochemical systems (BESs) for various biotechnological applications, such as bioelectricity generation via microbial fuel cells. These applications mostly associate with Geobacter and Shewanella biofilms grown on the surfaces of electrodes. Geobacter and Shewanella biofilms are electrically conductive, which is conferred by matrix-associated electroactive components such as c-type cytochromes and electrically conductive nanowires. The thickness and electroactivity of Geobacter and Shewanella biofilms have a significant impact on electron transfer efficiency in BESs. In this review, we first briefly discuss the roles of planktonic and biofilm-forming Geobacter and Shewanella cells in BESs, and then review biofilm biology with the focus on biofilm development, biofilm matrix, heterogeneity in biofilm and signaling regulatory systems mediating formation of Geobacter and Shewanella biofilms. Finally, we discuss strategies of Geobacter and Shewanella biofilm engineering for improving electron transfer efficiency to obtain enhanced BES performance.