Potential biotechnological application of microalgae: a critical review

Amino Acid and Carotenoid Profiles of Chlorella vulgaris During Two-Stage Cultivation at Different Salinities

Microalgae are valuable sources of bioactive compounds. However, their production requires strategies to enhance metabolic responses. This study explores how Chlorella vulgaris responds to different salinity conditions using a two-stage cultivation strategy, assessing the change in amino acid and carotenoid content on microalgae over time. First, microalgae were cultivated under optimal conditions, followed by exposure to different salinity levels (150 mM and 300 mM NaCl). Growth kinetics, nutrient uptake, and biochemical composition were analysed, revealing distinct salinity-induced responses. Similar specific growth rates were achieved across all assays, while nitrate removal improved under salinity and phosphate uptake decreased. Amino acid profiling showed significant declines in the content of several compounds and carotenoid content also presented declining trends, although moderate salinity mitigated degradation in key pigments. Principal component analysis identified high correlations between amino acids and carotenoids contents, forming groups of compounds with similar variations. These findings contribute to a better understanding of the salinity-induced response of C. vulgaris, offering insights for biotechnology applications. By optimising cultivation conditions, salinity could enhance bioactive compound retention, supporting the development of sustainable microalgae-based products.

Optimization of co-valorisation techniques for dairy and paper pulp wastewater in the cultivation of Chlorococcum sp. with a focus on mixture design, microwave-assisted pretreatment, and bioethanol production

This study optimized biomass and lipid accumulation using mixed dairy and paper-pulp wastewater for the cultivation of Chlorococcum sp. The obtained microalgal biomass was thereafter subjected to microwave-assisted pretreatment for optimal fermentable sugar release. Microwave power (100-700 W), pretreatment time (1-7 min), and acid-liquid ratio (1-5 %) were the input parameters for the pretreatment optimization study. The wastewater mixture ratios (25:75, 50:50, 100:0) of dairy and paper-pulp wastewater (DWW and PWW respectively) were achieved using simplex lattice mixture design to obtain high biomass and lipid accumulation in Chlorococcum sp cultivation. The model recommended a mixture of 64.69 % DWW and 35.31 % PWW for optimal biomass concentration, and a ratio of 34.21 % DWW and 65.79 % PWW for maximum lipid accumulation, predicting biomass concentration of 1.17 g/L and lipid accumulation of 0.39 g/g. Experimental validation resulted in biomass concentration and lipid accumulation 0.94 g/L and 0.39 g/g, respectively. Moreover, the experimental confirmation of the predicted fermentable sugar (11.14 g/L) yielded 15.67 g/L with pretreatment set points of 2.52 % HCl for 4.06 min at 700 W. Additionally, the prospect of the optimized pretreated microalgal biomass for bioethanol production (7.85 g/L) was achieved. Findings from this study could facilitate the implementation of DWW and PWW wastewaters utilization that could significantly lower the use of scarce potable water in keeping with portable water, energy, and environmental sustainability nexus towards the realisation of a circular bioeconomy.

Effect of UV-C Irradiation on Growth, Photosynthetic Pigments, and Lipid Profile of Chlorella sorokiniana

Chlorella sorokiniana holds significant industrial relevance owing to its lipid profile. Consequently, the objective of this investigation was to enhance growth, lipid content, and photosynthetic pigment production through the application of UV-C irradiation. The growth parameters of microalgae demonstrated an increase in response to concentration. After 35 days of incubation, cells exposed to UV-C for 8 min produced the most biomass at 2.2 g/l. Additionally, the chlorophyll content demonstrated a comparable pattern, with the highest concentrations of chlorophyll a (4.99 mg/l), chlorophyll b (6.22 mg/l), and total chlorophyll (11.21 mg/l) observed in cells incubated for 35 days and exposed to UV-C for 8 min. The lipid profile, nevertheless, demonstrated minor fluctuations. Specifically, the relative abundance of frequently occurring lipid compounds was found to be greater in cells treated with UV-C compared to the control group, and the most significant increase was obtained in 15-day culture exposed to UV-C for 8 min. However, after 35 days of incubation, this abundance decreased in cells exposed to UV-C for more than 4 min. Additionally, the observation of specific lipid compounds presented solely in cells obtained from algal cultures treated with UV-C was made. Consequently, drawing from the results obtained in the current investigation, it is possible to deduce that UV-C can be utilised to augment the overall development and yield of significant metabolites in microalgae. Furthermore, these microalgae can be converted into single-cell bioreactors to facilitate the production of lipids utilised in a variety of applications, a process that could be refined to cater to industrial demands.

Global omics study of Tetraselmis chuii reveals time-related metabolic adaptations upon oxidative stress

Microalgae species encounter oxidative stress in their natural environments, prompting the development of species-specific adaptation mechanisms. Understanding these mechanisms can offer valuable insights for biotechnological applications in microalgal metabolic manipulation. In this study, we investigated the response of Tetraselmis chuii, an industrially important microalga, to H2O2-induced oxidative stress. Exposure to 0.5-mM H2O2 resulted in reduced cell viability, and higher concentrations led to a drastic decline. After 1 h of exposure to H2O2, photosynthetic capacity (Qy) was negatively impacted, and this reduction intensified after 6 h of continuous stress. Global multi-omics analysis revealed that T. chuii rapidly responded to H2O2-induced oxidative stress within the first hour, causing significant changes in both transcriptomic and metabolomic profiles. Among the cellular functions negatively affected were carbon and energy flow, with photosynthesis-related PSBQ having a 2.4-fold downregulation, pyruvate kinase decreased by 1.5-fold, and urea content reduced by threefold. Prolonged exposure to H2O2 incurred a high energy cost, leading to unsuccessful attempts to enhance carbon metabolism, as depicted, for example, by the upregulation of photosystems-related PETC and PETJ by more than twofold. These findings indicate that T. chuii quickly responds to oxidative stress, but extended exposure can have detrimental effects on its cellular functions. KEY POINTS: • 0.5-mM H2O2-induced oxidative stress strongly affects T. chuii • Distinct short- and long-term adaptation mechanisms are induced • Major metabolic adaptations occur within the first hour of exposure.

Integrated processes for olive mill wastewater treatment and its revalorization for microalgae culture

The olive oil industry generates 30 million cubic meters of olive mill wastewaters (OMWWs) annually. OMWWs are a major environmental concern in the Mediterranean region due to their high organic matter content, suspended solids, unpleasant odor, and dark color. The application of primary treatments such as coagulation-flocculation, adsorption, and hybrid systems combining coagulation-flocculation with adsorption has enabled to remove part of the organic matter, color, turbidity, and growth-inhibiting compounds from OMWWs. Among these methods, the hybrid system combining activated carbon and chitosan has proven to be the best removal efficiency. Subsequently, secondary treatment involving the cultivation of Chlorella sp. on OMWWs pretreated with chitosan achieved the highest maximal specific growth rate (0.513 ± 0.022 day⁻1) and biomass productivity (0.621 ± 0.021 g/L/day). Notably, the fatty acids (FA) profile produced by Chlorella sp. cells grown under these conditions differed, underscoring the potential of OMWWs as a microalgal growth medium. This innovative approach not only addresses environmental issues but also opens new avenues for sustainable bioproducts.

Utilizing CO2 in industrial off-gas for microalgae cultivation: considerations and solutions

The utilization of microalgae to treat carbon dioxide (CO2)-rich industrial off-gas has been suggested as both beneficial for emissions reduction and economically favorable for the production of microalgal products. Common sources of off-gases include coal combustion (2-15% CO2), cement production (8-15% CO2), coke production (18-23% CO2), and ore smelting (6-7% CO2). However, industrial off-gas also commonly contains other acid gas components [typically nitrogen oxides (NOX) and sulfur dioxide (SO2)] and metals that could inhibit microalgae growth and productivity. To utilize industrial off-gas effectively in microalgae cultivation systems, a number of solutions have been proposed to overcome potential inhibitions. These include bioprospecting to identify suitable strains, genetic modification to improve specific cellular characteristics, chemical additions, and bioreactor designs and operating procedures.In this review, results from microalgae experiments related to utilizing off-gas are presented, and the outcomes of different conditions discussed along with potential solutions to resolve limitations associated with the application of off-gas.

Antimicrobial Activity of Arthrospira (Former Spirulina) and Dunaliella Related to Recognized Antimicrobial Bioactive Compounds

With the increasing rate of the antimicrobial resistance phenomenon, natural products gain our attention as potential drug candidates. Apart from being used as nutraceuticals and for biotechnological purposes, microalgae and phytoplankton have well-recognized antimicrobial compounds and proved anti-infectious potential. In this review, we comprehensively outline the antimicrobial activity of one genus of cyanobacteria (Arthrospira, formerly Spirulina) and of eukaryotic microalgae (Dunaliella). Both, especially Arthrospira, are mostly used as nutraceuticals and as a source of antioxidants for health supplements, cancer therapy and cosmetics. Their diverse bioactive compounds provide other bioactivities and potential for various medical applications. Their antibacterial and antifungal activity vary in a broad range and are strain specific. There are strains of Arthrospira platensis with very potent activity and minimum inhibitory concentrations (MICs) as low as 2-15 µg/mL against bacterial fish pathogens including Bacillus and Vibrio spp. Arthrospira sp. has demonstrated an inhibition zone (IZ) of 50 mm against Staphylococcus aureus. Remarkable is the substantial amount of in vivo studies of Arthrospira showing it to be very promising for preventing vibriosis in shrimp and Helicobacter pylori infection and for wound healing. The innovative laser irradiation of the chlorophyll it releases can cause photodynamic destruction of bacteria. Dunaliella salina has exhibited MIC values lower than 300 µg/mL and an IZ value of 25.4 mm on different bacteria, while Dunaliella tertiolecta has demonstrated MIC values of 25 and 50 μg/mL against some Staphylococcus spp. These values fulfill the criteria for significant antimicrobial activity and sometimes are comparable or exceed the activity of the control antibiotics. The bioactive compounds which are responsible for that action are fatty acids including PUFAs, polysaccharides, glycosides, peptides, neophytadiene, etc. Cyanobacteria, such as Arthrospira, also particularly have antimicrobial flavonoids, terpenes, alkaloids, saponins, quinones and some unique-to-them compounds, such as phycobiliproteins, polyhydroxybutyrate, the peptide microcystin, etc. These metabolites can be optimized by using stress factors in a two-step process of fermentation in closed photobioreactors (PBRs).

Influence of pH and dissolved oxygen control strategies on the performance of pilot-scale microalgae raceways using fertilizer or wastewater as the nutrient source

Dissolved oxygen concentration and pH are controllable and cost-effective variables that determine the success of microalgae-related processes. The present study compares different control strategies for pH and dissolved oxygen in pilot-scale microalgae production systems. Two 80 m2 raceway reactors were used, one operated with freshwater plus fertilizer and the other with wastewater as the nutrient source. Both were in semi-continuous mode at a fixed dilution rate of 0.2 day-1. A comparison between the classical On-Off and more advanced pH control strategies, such as PI and Event-based control, was performed, focusing on biomass productivity and the influence of all the process parameters on microalgae growth; "No control" of pH was also assayed. The results show that Event-based control was the best algorithm when using freshwater plus fertilizer. In contrast, no significant differences were observed using the different control strategies when wastewater was the nutrient source. These experiments were performed through selective control strategy, prioritizing pH over dissolved oxygen; however, it was demonstrated that they did not allow to achieve satisfactory dissolved oxygen removal results, especially for the fertilizer system. After modifying the gas diffuser configuration and improving the mass transfer, independent on-off strategies have been developed, permitting effective control of both variables and increasing productivity by up to 20% in both systems. Concluding, a detailed analysis of the energy demand for each strategy implemented in terms of gas consumption and gas flow to biomass ratio is provided.

Microalgae as a Sustainable Source of Antioxidants in Animal Nutrition, Health and Livestock Development

Microalgae are a renewable and sustainable source of bioactive compounds, such as essential amino acids, polyunsaturated fatty acids, and antioxidant compounds, that have been documented to have beneficial effects on nutrition and health. Among these natural products, the demand for natural antioxidants, as an alternative to synthetic antioxidants, has increased. The antioxidant activity of microalgae significantly varies between species and depends on growth conditions. In the last decade, microalgae have been explored in livestock animals as feed additives with the aim of improving both animals' health and performance as well as product quality and the environmental impact of livestock. These findings are highly dependent on the composition of microalgae strain and their amount in the diet. The use of carbohydrate-active enzymes can increase nutrient bioavailability as a consequence of recalcitrant microalgae cell wall degradation, making it a promising strategy for monogastric nutrition for improving livestock productivity. The use of microalgae as an alternative to conventional feedstuffs is becoming increasingly important due to food-feed competition, land degradation, water deprivation, and climate change. However, the cost-effective production and use of microalgae is a major challenge in the near future, and their cultivation technology should be improved by reducing production costs, thus increasing profitability.

Innovative and sustainable cultivation strategy for the production of Spirulina platensis using anaerobic digestates diluted with residual geothermal water

The following study investigates the possibility of growing the Spirulina platensis (S. platensis) cyanobacteria on two agro-industrial anaerobic digestion (AD) digestates diluted with geothermal water. The two digestates (FAWD: Food and Agricultural Wastes Digestate and CDD: Cheese Diary Digestate) were selected based on their different chemical characteristics, attributed to the type of feedstock and the operating conditions used during the AD process. In the first part of the study, a screening experiment was performed in 200 mL glass tubes to evaluate the appropriate dilution factor to generate the maximum S. platensis growth using both AD digestates individually and geothermal water as sustainable alternative dilution agent. Based on the different growth parameters measured, dilution rates of 5x and 40x were chosen for CDD and FAWD respectively, as a trade-off between growth performances and quantity of water to use. Volumetric productivities of 33 ± 1 mg/L/d and 56 ± 8 mg/L/d combined with maximal concentrations of 0.52 ± 0.02 g/L and 0.69 ± 0.02 g/L were achieved when cultivating S. platensis on CDD and FAWD, respectively. In the second part, the selected experimental results were scaled-up to 6 L flat panels bioreactors and S. platensis biomass productivities of 71 and 101 mg/L/d were obtained for CDD and FAWD, respectively using sodium bicarbonate as inorganic carbon source. When regulating the pH to 8.5 with carbon dioxide (CO2) injection, cultures were able to produce up to 1.13 g/L and 0.79 g/L of S. platensis corresponding to biomass productivities of 81 and 136 mg/L/d for CDD and FAWD, respectively. In addition, S. platensis properly assimilated the ammonium present in the digestate-based culture media, with removal efficiency up to 98% in the case of the CDD substrate. The characterization of the final S. platensis biomass revealed the presence of high concentration of carbohydrates (48.6-70.3 % of dry weight) in the culture supplemented with both AD digestates. The experimental findings show the potential of reusing liquid digestate, CO2 as well as geothermal water for the sustainable production of carbohydrate-rich S. platensis biomass.

Cyanobacteria as a Valuable Natural Resource for Improved Agriculture, Environment, and Plant Protection

Taking into consideration, the challenges faced by the environment and agro-ecosystem make increased for suggestions more reliable methods to help increase food security and deal with difficult environmental problems. Environmental factors play a critical role in the growth, development, and productivity of crop plants. Unfavorable changes in these factors, such as abiotic stresses, can result in plant growth deficiencies, yield reductions, long-lasting damage, and even death of the plants. In reflection of this, cyanobacteria are now considered important microorganisms that can improve the fertility of soils and the productivity of crop plants due to their different features like photosynthesis, great biomass yield, ability to fix the atmospheric N2, capability to grow on non-arable lands, and varied water sources. Furthermore, numerous cyanobacteria consist of biologically active substances like pigments, amino acids, polysaccharides, phytohormones, and vitamins that support plant growth enhancement. Many studies have exposed the probable role of these compounds in the alleviation of abiotic stress in crop plants and have concluded with evidence of physiological, biochemical, and molecular mechanisms that confirm that cyanobacteria can decrease the stress and induce plant growth. This review discussed the promising effects of cyanobacteria and their possible mode of action to control the growth and development of crop plants as an effective method to overcome different stresses.

Graphical Abstract

Robust control designs for microalgae cultivation in continuous photobioreactors

Microalgae are used to produce renewable biofuels and high-value components and in bioremediation and CO2 sequestration tasks. These increasing applications, in conjunction with a desirable constant large-scale productivity, motivate the development and application of practical controllers. This paper addresses the application of robust control schemes for microalgae cultivation in continuous photobioreactors. Due to the model uncertainties and external perturbations, robust control designs are required to guarantee the desired microalgae productivity. Furthermore, simple controller designs are desirable for practical implementation purposes. Therefore, two robust control designs are applied and evaluated in this paper for two relevant case studies of microalgae cultivation in photobioreactors. The first control design is based on an enhanced simple-input output model with uncertain estimation. The second control design is the robust nonlinear model predictive control considering different uncertain scenarios. Numerical simulations of two case studies aimed at lipid production and CO2 capture under different conditions are presented to evaluate the robust closed-loop performance.

Bioactive compounds by microalgae and potentials for the management of some human disease conditions

Microalgae biomasses are excellent sources of diverse bioactive compounds such as lipids, polysaccharides, carotenoids, vitamins, phenolics and phycobiliproteins. Large-scale production of these bioactive substances would require microalgae cultivation either in open-culture systems or closed-culture systems. Some of these bioactive compounds (such as polysaccharides, phycobiliproteins and lipids) are produced during their active growth phase. They appear to have antibacterial, antifungal, antiviral, antioxidative, anticancer, neuroprotective and chemo-preventive activities. These properties confer on microalgae the potential for use in the treatment and/or management of several neurologic and cell dysfunction-related disease conditions, including Alzheimer's disease (AD), AIDS and COVID-19, as shown in this review. Although several health benefits have been highlighted, there appears to be a consensus in the literature that the field of microalgae is still fledgling, and more research needs to be carried out to ascertain the mechanisms of action that underpin the effectiveness of microalgal compounds. In this review, two biosynthetic pathways were modeled to help elucidate the mode of action of the bioactive compounds from microalgae and their products. These are carotenoid and phycobilin proteins biosynthetic pathways. The education of the public on the importance of microalgae backed with empirical scientific evidence will go a long way to ensure that the benefits from research investigations are quickly rolled out. The potential application of these microalgae to some human disease conditions was highlighted.

Selenium-binding Protein 1 (SBD1): A stress response regulator in Chlamydomonas reinhardtii

Selenium-binding proteins (SBPs) represent a ubiquitous protein family implicated in various environmental stress responses, although the exact molecular and physiological role of the SBP family remains elusive. In this work, we report the identification and characterization of CrSBD1, an SBP homolog from the model microalgae Chlamydomonas reinhardtii. Growth analysis of the C. reinhardtii sbd1 mutant strain revealed that the absence of a functional CrSBD1 resulted in increased growth under mild oxidative stress conditions, although cell viability rapidly declined at higher hydrogen peroxide (H2O2) concentrations. Furthermore, a combined global transcriptomic and metabolomic analysis indicated that the sbd1 mutant exhibited a dramatic quenching of the molecular and biochemical responses upon H2O2-induced oxidative stress when compared to the wild-type. Our results indicate that CrSBD1 represents a cell regulator, which is involved in the modulation of C. reinhardtii early responses to oxidative stress. We assert that CrSBD1 acts as a member of an extensive and conserved protein-protein interaction network including Fructose-bisphosphate aldolase 3, Cysteine endopeptidase 2, and Glutaredoxin 6 proteins, as indicated by yeast two-hybrid assays.

The Potential of the Marine Microalga Diacronema lutheri in the Prevention of Obesity and Metabolic Syndrome in High-Fat-Fed Wistar Rats

Long-chain polyunsaturated fatty acids n-3 series (n-3 LC-PUFAs), especially eicosapentaenoic and docosahexaenoic acids, are known to exert preventive effects on obesity and metabolic syndrome. Mainly consumed in the form of fish oil, LC-PUFAs n-3 are also found in significant quantities in other sources such as certain microalgae. The aim of this study was to evaluate the effects of Diacronema lutheri (Dia), a microalga rich in n-3 LC-PUFAs, on metabolic disorders associated with obesity. Three groups of male Wistar rats (n = 6 per group) were submitted for eight weeks to a standard diet or high-fat and high-fructose diet (HF), supplemented or not with 12% of Dia (HF-Dia). Compared to HF rats, HF-Dia rats showed a 41% decrease in plasma triacylglycerol (TAG) and an increase in plasma cholesterol (+35%) as well as in high-density lipoprotein cholesterol (+51%) without change to low-density lipoprotein cholesterol levels. Although fasting glycemia did not change, glucose and insulin tolerance tests highlighted an improvement in glucose and insulin homeostasis. Dia supplementation restored body weight and fat mass, and decreased levels of liver TAG (−75%) and cholesterol (−84%). In HF-Dia rats, leptin was decreased (−30%) below the control level corresponding to a reduction of 68% compared to HF rats. Similarly, the anti-inflammatory cytokines interleukin-4 (IL-4) and IL-10 were restored up to control levels, corresponding to a 74% and 58% increase in HF rats, respectively. In contrast, the level of IL-6 remained similar in the HF and HF-Dia groups and about twice that of the control. In conclusion, these results indicated that the D. lutheri microalga may be beneficial for the prevention of weight gain and improvement in lipid and glucose homeostasis.

Microalgae Bioactive Compounds to Topical Applications Products-A Review

Microalgae are complex photosynthetic organisms found in marine and freshwater environments that produce valuable metabolites. Microalgae-derived metabolites have gained remarkable attention in different industrial biotechnological processes and pharmaceutical and cosmetic industries due to their multiple properties, including antioxidant, anti-aging, anti-cancer, phycoimmunomodulatory, anti-inflammatory, and antimicrobial activities. These properties are recognized as promising components for state-of-the-art cosmetics and cosmeceutical formulations. Efforts are being made to develop natural, non-toxic, and environmentally friendly products that replace synthetic products. This review summarizes some potential cosmeceutical applications of microalgae-derived biomolecules, their mechanisms of action, and extraction methods.

Uptake of Cu2+ by unicellular microalga Chlorella vulgaris from synthetic wastewaters is attenuated by polystyrene microspheres

Aquatic and terrestrial ecosystems are receiving micro- and macro-plastic pollutants alarmingly from various anthropogenic activities. The complications caused by microplastics are largely unexplored and need substantial studies. In the current study, we investigated the repressive effects of negatively and positively charged polystyrene microspheres of two variable sizes (0.05 and 0.5 μm) on functioning of unicellular green microalgae. For the purpose, a pollution-resistant microalgal species was isolated and identified by 18 S rRNA gene sequencing as Chlorella vulgaris. The functioning of the pure-cultured microalgal cells was then assessed in terms of their better metal (Cu²⁺) uptake potential with and without the provision of PS microspheres. The algal cells up took Cu²⁺ significantly (90% at 75 mg/L) after 15 days of aerobic incubation. However, positively charged polystyrene microspheres remarkably affected the uptake of Cu²⁺ and it was comparatively reduced to almost 50%, while negatively charged microspheres couldn't influence the Cu²⁺ uptake potential of C. vulgaris. In addition, size of the microspheres insignificantly affected the metal uptake potential of the microalgae. Unveiled facts of this investigation will be helpful for designing economical and efficient remedial systems based on the in-situ implication of microalgae.

High-value biochemical products & applications of freshwater eukaryotic microalgae

A shift in public perception of the health and nutritional benefits of organic supplements and skin care products has led to a surge in high-value products being extracted from microalgae. Traditional forms of microalgae products were proteins, lipids and carbohydrates. However, in recent times the extraction of carotenoids (pigments), polyunsaturated acids (PUFAs), vitamins, phytosterols and polyphenols has increased significantly. Despite the diversity of products most research has failed to scale up production to industrial scale due to economic constraints and productivity capacities. It is clear that the main market drivers are the pharmaceutical and nutraceutical industries. This paper reviews the high-value products produced from freshwater eukaryotic microalgae. In addition, the paper also considers the biochemical properties of eukaryotic microalgae to provide a comparative analysis of different strains based on their high-value product content.

Microalgae harvesting techniques: updates and recent technological interventions

Microalgal biomass has garnered attention as a renewable and sustainable resource for producing biodiesel. The harvesting of microalgal biomass is a significant bottleneck being faced by the industries as it is the crucial cost driver in the downstream processing of biomass. Bioharvesting of microalgal biomass mediated by: microbial, animal, and plant-based polymeric flocculants has gained a higher probability of utility in accumulation due to: its higher dewatering potential, less toxicity, and ecofriendly properties. The present review summarizes the key challenges and the technological advancements associated with various such harvesting techniques. The economic and technical aspects of different microalgal harvesting techniques, particularly the cationic polymeric flocculant-based harvesting of microalgal biomass, are also discussed. Furthermore, interactions of flocculants with microalgal biomass and the effects of these interactions on metabolite and lipid extractions are discussed to offer a promising solution for suitability in selecting the most efficient and economical method of microalgal biomass harvesting for cost-effective biodiesel production.

Algae biotechnology for industrial wastewater treatment, bioenergy production, and high-value bioproducts

A growing world population is causing hazardous compounds to form at an increasingly rapid rate, calling for ecological action. Wastewater management and treatment is an expensive process that requires appropriate integration technology to make it more feasible and cost-effective. Algae are of great interest as potential feedstocks for various applications, including environmental sustainability, biofuel production, and the manufacture of high-value bioproducts. Bioremediation with microalgae is a potential approach to reduce wastewater pollution. The need for effective nutrient recovery, greenhouse gas reduction, wastewater treatment, and biomass reuse has led to a wide interest in the use of microalgae for wastewater treatment. Furthermore, algae biomass can be used to produce bioenergy and high-value bioproducts. The use of microalgae as medicine (production of bioactive and medicinal compounds), biofuels, biofertilizers, and food additives has been explored by researchers around the world. Technological and economic barriers currently prevent the commercial use of algae, and optimal downstream processes are needed to reduce production costs. Therefore, the simultaneous use of microalgae for wastewater treatment and biofuel production could be an economical approach to address these issues. This article provides an overview of algae and their application in bioremediation, bioenergy production, and bioactive compound production. It also highlights the current problems and opportunities in the algae-based sector, which has recently become quite promising.

Revealing Lipid Body Formation and its Subcellular Reorganization in Oleaginous Microalgae Using Correlative Optical Microscopy and Infrared Nanospectroscopy

The purpose of this work is to develop an integrated imaging approach to characterize without labeling at the sub-cellular level the formation of lipid body droplets (LBs) in microalgae undergoing nitrogen starvation. First conventional optical microscopy approaches, gas chromatography, and turbidimetry measurements allowed to monitor the biomass and the total lipid content in the oleaginous microalgae Parachlorella kesslerii during the starvation process. Then a local analysis of the LBs was proposed using an innovative infrared nanospectroscopy technique called atomic force microscopy-based infrared spectroscopy (AFM-IR). This label-free technique assessed the formation of LBs and allowed to look into the LB composition thanks to the acquisition of local infrared spectra. Last correlative measurements using fluorescence microscopy and AFM-IR were performed to investigate the subcellular reorganization of LB and the chloroplasts.

Bioenergy from dairy manure: technologies, challenges and opportunities

Dairy manure (DM) is a kind of cheap cellulosic biomass resource which includes lignocellulose and mineral nutrients. Random stacks not only leads damage to the environment, but also results in waste of natural resources. The traditional ways to use DM include returning it to the soil or acting as a fertilizer, which could reduce environmental pollution to some extent. However, the resource utilization rate is not high and socio-economic performance is not utilized. To expand the application of DM, more and more attention has been paid to explore its potential as bioenergy or bio-chemicals production. This article presented a comprehensive review of different types of bioenergy production from DM and provided a general overview for bioenergy production. Importantly, this paper discussed potentials of DM as candidate feedstocks not only for biogas, bioethanol, biohydrogen, microbial fuel cell, lactic acid, and fumaric acid production by microbial technology, but also for bio-oil and biochar production through apyrolysis process. Additionally, the use of manure for replacing freshwater or nutrients for algae cultivation and cellulase production were also discussed. Overall, DM could be a novel suitable material for future biorefinery. Importantly, considerable efforts and further extensive research on overcoming technical bottlenecks like pretreatment, the effective release of fermentable sugars, the absence of robust organisms for fermentation, energy balance, and life cycle assessment should be needed to develop a comprehensive biorefinery model.

Study on Spirulina platensis growth employing non-linear analysis of biomass kinetic models

Spirulina platensis has been considered a promising source of food supplement to combat malnutrition worldwide. Numerous investigations have stated its immune activity, ability to absorb CO2 during the growth period, and antioxidant potential. Well-known theoretical biomass kinetic model sheds are capable of qualitative analysis of the fast microalgae growth. In this regard, we considered eight popular biomass models: Monod, Haldane, Andrews & Noack, Teissier, Hinshelwood, Yano & Koga, Webb and, Aiba model comprising analytical investigation within the numerical simulation. Besides, in this study, we establish a new mathematical biomass growth model by merging the well-known Hinshelwood and Yano & Koga models. We explored the most suitable Spirulina growth model to minimize the overstated and understated growth trends in the assorted eight biomass kinetic models. Our findings show microalgae biomass growth and substrate diminishes along with time, and these results were compared with available experimental data. Results present a high value of R2(0.9862), a low value of RSS (0.0813), AIC (-9.7277), and BIC (-8.2148) implied significantly fitted with the investigated data for the growth of Spirulina platensis compared with popular eight studied models.

Treatment of clean in place (CIP) wastewater using microalgae: Nutrient upcycling and value-added byproducts production

CIP wastewater is one of the major wastewater streams from the food industry, and its treatment is generally expensive, requiring a large effort to reduce its typically high nitrogen (N), and phosphorus (P) contents. Microalgae-based wastewater treatment is increasingly explored as a more sustainable alternative to the conventional methods, due to the added benefit of nutrient upcycling and value-added biomass production. For the first time, four microalgae species were used to treat CIP wastewater high in N (565.5 mg NO₃^--N/l) and P (98.0 mg PO₄^3--P/l). An intermittent biomass harvesting strategy was adopted in this study to enhance the purification of CIP water and redirection of nutrients into algal biomass. Over 93 days operation, N removal efficiency was 52.1 ± 2.9%, 54.8 ± 2.5%, 50.0 ± 2.3% and 48.3 ± 0.5%, and P removal efficiency was 65.5 ± 10.0%, 79.4 ± 6.1%, 61.8 ± 2.5% and 69.1 ± 7.7% for Chlamydomonas reinhardtii, Chlorella vulgaris, Scenedesmus obliquus and wastewater borne microalgae, respectively. After the first (acclimatization) and second growth cycles, cell growth and nutrient removal slowed down but increased again after adding trace nutrients, indicating the lack of trace elements after the first two growth cycles. In the fourth and fifth batch runs, both algal growth rate and nutrient removal rate decreased despite adding trace nutrients and/or increasing light intensity, this being a consequence of the excreted soluble algal products accumulating during long-term operation. S. obliquus had the highest protein concentration of 44.5 ± 9.8% DW, while C. vulgaris accumulated the highest total lipid content (15.6 ± 0.9%, DW). In this proof-of-concept study, the cultivation of microalgae in CIP wastewater with an intermittent harvest of the accumulated algal biomass is demonstrated and it outlines the potential of microalgae to sustainably treat effluents with extremely high nutrients concentration while producing the food-grade algae biomass.

Oxidation of Terpenoids to Achieve High-Value Flavor and Fragrances—Questioning Microalgae Oxidative Capabilities in the Biotransformation of the Sesquiterpene Valencene and of Selected Natural Apocarotenoids

Natural flavor and fragrance market size is expected to grow steadily due to the rising consumer demand of natural ingredients. This market request is guided by the general opinion that the production of natural compounds leads to a reduction of pollution, with inherent advantages for the environment and people’s health. The biotransformation reactions have gained high relevance in the production of natural products. In this context, few pieces of research have described the role of microalgae in the oxidation of terpenoids. In this present study, we questioned the role of microalgal based oxidation in the synthesis of high-value flavors and fragrances. This study investigated the role of three different microalgae strains, Chlorella sp. (211.8b and 211.8p) and Chlorococcum sp. (JB3), in the oxidation of different terpenoid substrates: α-ionone, β-ionone, theaspirane and valencene. Unfortunately, the experimental data showed that the microalgal strains used are not responsible for the substrate oxidation. In fact, our experiments demonstrate that the transformation of the four starting compounds is a photochemical reaction that involves the oxygen as oxidant. Even though these findings cast a shadow on the use of these microorganisms for an industrial purpose, they open a new possible strategy to easily obtain nootkatone in a natural way by just using an aqueous medium, oxygen and light.

Improving Microalgae Research and Marketing in the European Atlantic Area: Analysis of Major Gaps and Barriers Limiting Sector Development

Microalgae and cyanobacteria represent a diverse renewable resource with significant potential for the industrial production of goods and services with high added value. However, scientific, technical/technological, legislative and market gaps and barriers still limit the growth of these markets in Europe and the number of exploited species. We conducted an in-depth survey of European microalgae researchers, experts and stakeholders to identify these limitations and to discuss strategies, recommendations and guidelines to overcome these barriers. Here, we present the findings of this study which detail the main promising markets for microalgae and cyanobacteria in the coming decades, an updated SWOT analysis of the sector, the current opportunities, limitations, risks and threats for microalgae research and market sectors in Europe, a traffic light analysis for a quick assessment of market opportunities for each microalgae sector and detailed recommendations/guidelines for overcoming the scientific, technical/technological, legislative and market gaps and barriers.

Microalgal Cell Biofactory-Therapeutic, Nutraceutical and Functional Food Applications

Microalgae are multifaceted photosynthetic microorganisms with emerging business potential. They are present ubiquitously in terrestrial and aquatic environments with rich species diversity and are capable of producing significant biomass. Traditionally, microalgal biomass is being used as food and feed in many countries around the globe. The production of microalgal-based bioactive compounds at an industrial scale through biotechnological interventions is gaining interest more recently. The present review provides a detailed overview of the key algal metabolites, which plays a crucial role in nutraceutical, functional foods, and animal/aquaculture feed industries. Bioactive compounds of microalgae known to exhibit antioxidant, antimicrobial, antitumor, and immunomodulatory effects were comprehensively reviewed. The potential microalgal species and biological extracts against human pathogens were also discussed. Further, current technologies involved in upstream and downstream bioprocessing including cultivation, harvesting, and cell disruption were documented. Establishing microalgae as an alternative supplement would complement the sustainable and environmental requirements in the framework of human health and well-being.

Extraction, Properties, and Applications of Bioactive Compounds Obtained from Microalgae

With the increase in the global population, getting new sources of food is essential. One of the solutions can be found in the oceans due to algae. Microalgae are aquatic photosynthetic organisms used mainly due to their variety of bioactive compounds. The consumption of microalgae has been carried out for centuries and is recommended by organizations, such as OMS and FAO, due to its nutritional value and its properties. Based on the existing literature, there is substantial evidence of the nutritional quality of the algae as well as their functional elements. However, much quantification is still necessary, as well as studying possible adverse effects. The present review describes the compounds of alimentary interest present in these algae as well as different extraction techniques assisted by different energetic mechanisms (such as heat, supercritical-fluid, microwave, ultrasound, enzymes, electric field, high hydrostatic pressure, among others). The most challenging and crucial issues are reducing microalgae growth cost and optimizing extraction techniques. This review aimed a better understanding of the uses of microalgae for new researches in nutrition. Since the use of microalgae is still a field in which there is much to discover, it is likely that more benefits will be found in its consumption.

Microalgae starch: A promising raw material for the bioethanol production

Ethanol is currently the most successful biofuel and can be produced from microalgal biomass (third-generation). Ethanol from microalgal biomass has advantages because it does not use arable land and reduces environmental impacts through the sequestration of CO₂ from the atmosphere. In this way, micro and macroalgal starch, which is structurally similar to that from higher plants can be considered a promise raw material for the production of bioethanol. Thus, strategies can be used to intensify the carbohydrate concentration in the microalgal biomass enabling the production of third-generation bioethanol. The microalgae biomass can be destined to biorefineries so that the residual biomass generated from the extraction processes is used for the production of high value-added products. Therefore, the process will have an impact on reducing the production costs and the generation of waste. In this context, this review aims to bring concepts and perspectives on the production of third-generation bioethanol, demonstrating the microalgal biomass potential as a carbon source to produce bioethanol and supply part of the world energy demand. The main factors that influence the microalgal cultivation and fermentation process, as well as the processes of transformation of biomass into the easily fermentable substrate are also discussed.

Development of a constitutive and an auto-inducible high-yield expression system for recombinant protein production in the microalga Nannochloropsis oceanica

Photoautotrophic microalgae offer a great potential as novel hosts for efficient recombinant protein production. Nannochloropsis oceanica produces an extraordinarily high content of polyunsaturated fatty acids, and its robust growth characteristics, published genome sequence and efficient nuclear transformation make N. oceanica a promising candidate for biotechnological applications. To establish a robust and flexible system for recombinant protein production, we cloned six endogenous, potentially constitutive or inducible promoters from N. oceanica strain CCMP1779 and investigated their strength using monomeric Venus as reporter gene. Microscopic pre-screening of individual transformants revealed that the promoters of elongation factor (EF), tubulin (TUB) and nitrate reductase (NR) enabled high reporter gene expression. Comparative quantitative analyses of transformant populations by flow cytometry and qRT-PCR demonstrated the highest Venus expression from the EF promoter and the NR promoter if extended by an N-terminal 14-amino acid leader sequence. The kinetics of reporter gene expression were analysed during photobioreactor cultivation, achieving Venus yields of 0.3% (for EF) and 4.9% (for NR::LS) of total soluble protein. Since inducible expression systems enable the production of toxic proteins, we developed an auto-induction medium for the NR promoter transformants. By switching the N source from ammonium to nitrate in the presence of low ammonium concentrations, the starting point of Venus induction could be fine-tuned and shifted towards exponential growth phase while maintaining high recombinant protein yields. Taken together, we demonstrate that a model recombinant protein can be produced robustly and at very high levels in N. oceanica not only under constitutive but also under auto-inducible cultivation conditions. KEY POINTS: • Nannochloropsis oceanica might serve as host for recombinant protein production. • Comparative promoter strength analyses were conducted for twelve different constructs. • Robust high-yield recombinant protein production was achieved under constitutive conditions. • The nitrate reductase promoter enabled protein production under auto-induction conditions.

A novel fed-batch strategy enhances lipid and astaxanthin productivity without compromising biomass of Chromochloris zofingiensis

To improve lipid and astaxanthin productivity without compromising biomass during the whole cultivation period, carbon-dependent kinetics involving nitrogen stress was applied under excess light to elevate intracellular carbon availability and metabolic activity of Chromochloris zofingiensis. Results suggested that fed-batch strategy proposed could increase lipid and astaxanthin productivity to 457.1 and 2.0 mg L^-1 d^-1, respectively. Biomass productivity at 1084.3 mg L^-1 d^-1 was comparable with that under suitable condition. Then ¹³C tracer-based metabolic flux analysis (¹³C-MFA) demonstrated that central carbon metabolism provided ATP, NADPH and carbon availability for lipid biosynthesis during the strategy. In combination with targeted metabolite analysis, ¹³C-MFA revealed that the strategy improved precursor content for lipid biosynthesis and elevated path rate to synthesize C16:0 and C18:0. The enhanced lipid content potentially accounted for the high biomass productivity. Therefore, comprehensively understanding relationships between carbon availability and carbon conversion could precisely design strategy for productivity improvements during cultivation.

Analysis of Scientific Research Driving Microalgae Market Opportunities in Europe

A bibliographic database of scientific papers published by authors affiliated to research institutions worldwide, especially focused in Europe and in the European Atlantic Area, and containing the keywords "microalga(e)" or "phytoplankton" was built. A corpus of 79,020 publications was obtained and analyzed using the Orbit Intellixir software to characterize the research trends related to microalgae markets, markets opportunities and technologies that could have important impacts on markets evolution. Six major markets opportunities, the production of biofuels, bioplastics, biofertilizers, nutraceuticals, pharmaceuticals and cosmetics, and two fast-evolving technological domains driving markets evolution, microalgae harvesting and extraction technologies and production of genetically modified (GM-)microalgae, were highlighted. We here present an advanced analysis of these research domains to give an updated overview of scientific concepts driving microalgae markets.

Enhancement of biofuel production by microalgae using cement flue gas as substrate

The cement industry generates a substantial amount of gaseous pollutants that cannot be treated efficiently and economically using standard techniques. Microalgae, a promising bioremediation and biodegradation agent used as feedstock for biofuel production, can be used for the biotreatment of cement flue gas. In specific, components of cement flue gas such as carbon dioxide, nitrogen, and sulfur oxides are shown to serve as nutrients for microalgae. Microalgae also have the capacity to sequestrate heavy metals present in cement kiln dust, adding further benefits. This work provides an extensive overview of multiple approaches taken in the inclusion of microalgae biofuel production in the cement sector. In addition, factors influencing the production of microalgal biomass are also described in such an integrated plant. In addition, process limitations such as the adverse impact of flue gas on medium pH, exhaust gas toxicity, and efficient delivery of carbon dioxide to media are also discussed. Finally, the article concludes by proposing the future potential for incorporating the microalgae biofuel plant into the cement sector.

Microalgal Growth in Paper Industry Effluent: Coupling Biomass Production with Nutrients Removal

Paper and pulp industries produce effluents with high phosphorus concentrations, which need to be treated before their discharge in watercourses. The use of microalgae for this purpose has attracted the attention of researchers because: (i) microalgae can assimilate phosphorus (one of the main nutrients for their growth); and (ii) growing on effluents can significantly reduce the costs and environmental impact of microalgal biomass production. This study evaluated the growth and ability of Chlorella vulgaris to remove the phosphorus from a secondary-treated effluent of a Portuguese paper company. Batch experiments were performed for 11 days using different dilutions of the effluent to evaluate its inhibitory effect on microalgae. Results showed that the non-diluted effluent inhibited microalgal growth, indicating that this bioremediation process is possible after a previous dilution of the effluent. Regarding phosphorus removal, promising results were achieved, especially in the experiments conducted with the most diluted effluent: removal efficiencies obtained in these conditions were (54 ± 1)%. Another interesting finding of this study was microalgal growth in flakes’ form (mainly due to the compounds present in the effluent and to the pH values achieved), which can be an important economic advantage for biomass recovery after the remediation step.

A review of high value-added molecules production by microalgae in light of the classification

This work reviews applications of high added value molecules produced from microalgae. Older forms of valorization - health food and quality feed, polyunsaturated fatty acids, pigments, carbohydrates - are currently penetrating their markets. They are driven by desirable properties: texturer and dye for food industry, antioxidant for cosmetics and the appetite of the general public for biosourced compounds. Most recent developments, such as peptides, vitamins, polyphenols, phytosterols and phytohormones, are struggling to meet their market and reach economical competitiveness. Still they are pushed forward by the very powerful driver that is pharmaceutical industry. In addition this work also proposes to link microalgae phyla and related potential applications. This is done through highlighting of which bioactive compounds can be found in which phyla. While some seem to be restricted to aquaculture, Cyanobacteria, Chlorophyta and Rhodophyta show great promises.

Protective Action of Ostreococcus tauri and Phaeodactylum tricornutum Extracts towards Benzo[a]Pyrene-Induced Cytotoxicity in Endothelial Cells

Marine microalgae are known to be a source of bioactive molecules of interest to human health, such as n-3 polyunsaturated fatty acids (n-3 PUFAs) and carotenoids. The fact that some of these natural compounds are known to exhibit anti-inflammatory, antioxidant, anti-proliferative, and apoptosis-inducing effects, demonstrates their potential use in preventing cancers and cardiovascular diseases (CVDs). Benzo[a]pyrene (B[a]P), a polycyclic aromatic hydrocarbon (PAH), is an ubiquitous environmental pollutant known to contribute to the development or aggravation of human diseases, such as cancer, CVDs, and immune dysfunction. Most of these deleterious effects are related to the activation of the polycyclic aromatic hydrocarbon receptor (AhR). In this context, two ethanolic microalgal extracts with concentrations of 0.1 to 5 µg/mL are tested, Ostreoccoccus tauri (OT) and Phaeodactylum tricornutum (PT), in order to evaluate and compare their potential effects towards B[a]P-induced toxicity in endothelial HMEC-1 cells. Our results indicate that the OT extract can influence the toxicity of B[a]P. Indeed, apoptosis and the production of extracellular vesicles were decreased, likely through the reduction of the expression of CYP1A1, a B[a]P bioactivation enzyme. Furthermore, the B[a]P-induced expression of the inflammatory cytokines IL-8 and IL1-β was reduced. The PT extract only inhibited the expression of the B[a]P-induced cytokine IL-8 expression. The OT extract therefore seems to be a good candidate for counteracting the B[a]P toxicity.

High-value chemicals from Botryococcus braunii and their current applications - A review

Botryococcus braunii is known for its high yield of extracellular hydrocarbons and polysaccharides. Hydrocarbons, especially botryococcenes and squalene can be used as not only fuels but also alternative feedstock for other fossil-based products. Exopolysaccharides excreted from B. braunii can be used as scaffolds for polyesters production, and have a notable potential for synthesis of nanoparticles. B. braunii is also a rich source of carotenoids, especially the unique secondary carotenoids such as botryoxanthins that have never been found in other microalgae. The morphology, physiology, and outer cell walls of B. braunii are complex. Understanding the colony structure shall provide insights into the mechanism of cell growth and chemicals secretion. It is possible to improve the production economics of the alga with advanced culture systems. Moreover, investigation of metabolic pathways for B. braunii may help us understand their regulation and provide valuable information for strain selection and optimal production of high-value chemicals.

Recent Advances in Microalgae Peptides: Cardiovascular Health Benefits and Analysis

There is now great interest in food protein hydrolysates and food-derived peptides, because they may provide numerous health benefits. Among other foodstuffs, microalgae appear to be sustainable sources of proteins and bioactive peptides that can be exploited in foods and functional formulations. This review considers protein hydrolysates and individual peptides that may be relevant in cardiovascular disease prevention because they mimic the functions of mediators involved in pathologic processes that represent relevant risk factors for cardiovascular disease development, such as hypercholesterolemia, hypertension, diabetes, inflammation, and oxidative status. Some of these peptides are also multifunctional (i.e., they offer more than one benefit). Moreover, the most efficient techniques for protein extraction and hydrolyzation are commented on, as well as the best methodologies for high-throughput detection and quantification. Finally, current challenges and critical issues are discussed.

Liquid Biphasic Systems for Oil-Rich Algae Bioproducts Processing

Oleaginous algae are nowadays of significance for industrial biotechnology applications and for the welfare of society. Tremendous efforts have been put into the development of economically feasible and effective downstream processing techniques in algae research. Currently, Liquid Biphasic Systems (LBSs) are receiving much attention from academia and industry for their potential as green and effective downstream processing methods. This article serves to review the applications of LBSs (LBS and Liquid Biphasic Flotation System (LBFS)) in the separation, recovery and purification of algae products, as well as their basic working principles. Moreover, cell disruptive technologies incorporated into LBSs in algae research are reported. This review provides insights into the downstream processing in algae industrial biotechnology which could be beneficial for algae biorefinement.

Current states and challenges of salt-affected soil remediation by cyanobacteria

Natural and human activities lead to soil degradation and soil salinization. The decrease of farmlands threatens food security. There are approximately 1 billion ha salt-affected soils all over of world, which can be made available resources after chemical, physical and biological remediation. Nostoc, Anabaena and other cyanobacterial species have outstanding capabilities, such as the ability to fix nitrogen from the air, produce an extracellular matrix and produce compatible solutes. The remediation of salt-affected soil is a complex and difficult task. During the past years, much new research has been conducted that shows that cyanobacteria are effective for salt-affected soil remediation in laboratory studies and field trials. The related mechanisms for both salt tolerance and salt-affected soil remediation were also evaluated from the perspective of biochemistry, molecular biology and systems biology. The effect of cyanobacteria on salt-affected soil is related to nitrogen fixation and other mechanisms. There are complicated interactions among cyanobacteria, bacteria, fungi and the soil. The interaction between cyanobacteria and salt-tolerant plants should be considered if the cyanobacterium is utilized to improve the soil fertility in addition to performing soil remediation. It is critical to re-establish the micro-ecology in salt-affected soils and improve the salt affected soil remediation efficiency. The first challenge is the selection of suitable cyanobacterial strain. The co-culture of cyanobacteria and bacteria is also potential approach. The cultivation of cyanobacteria on a large scale should be optimized to improve productivity and decrease cost. The development of bio-remediating agents for salt-affected soil remediation also relies on other technical problems, such as harvesting and contamination control. The application of cyanobacteria in salt-affected soil remediation will reconstruct green agriculture and promote the sustainable development of human society.

Nitrogen modulation under chemostat cultivation mode induces biomass and lipid production by Chlorella vulgaris and reduces antenna pigment accumulation

Algal growth limitation in large-scale cultivation mostly results from high level synthesis of photosynthetic pigments, owing to self-shading effects and attenuation of light distribution. To overcome this problem, here we investigated the influence of nitrogen modulation on changes in antenna pigments as well as biomass and lipid production by Chlorella vulgaris under a chemostat continuous cultivation mode. The production of algal antenna pigments, including chlorophylls and carotenoids, was promoted in a total nitrogen (TN) concentration-dependent manner. Maximum algal biomass and lipid production were obtained from 70 mg/L of TN concentration along with a significant increase in light transmittance and reduction in antenna pigments. Furthermore, the composition of polyunsaturated fatty acids remarkably augmented at low TN concentrations. These results suggest that the reduction in algal antenna pigment synthesis via modulation of nitrogen concentration may serve as an effective strategy to enhance algal biomass and lipid production.