Assessment of Pollen Viability for Wheat

Magnesium fertilization reduces high-temperature damages during anthesis in spring wheat (Triticum aestivum L.) by affecting pollen viability and seed weight

Terminal heat during reproductive stages of wheat (Triticum aestivum L.) limits the productivity of the crop. Magnesium (Mg) is an essential macronutrient that is involved in many physiological and biochemical processes to affect photosynthesis and seed weight. The present study comparatively evaluated Mg applied to soil (80 kg MgSO4·7H2O ha-1) and to plant foliage (4% w/v) in improving wheat performance under terminal heat. Wheat crop was grown in two sets of treatments until the booting stage, and then one set of plants was shifted to a glasshouse (±5 °C) at the booting stage to grow until maturity in comparison to control plants kept under ambient warehouse condition. Heat stress reduced the pollen viability while foliar- and soil-applied Mg improved it by 3% and 6% under heat stress, respectively, compared to the control without Mg treatment. The 100-seed weight, spike length, and biological yield reduced by 39%, 19%, and 50% under heat stress; however, foliar and soil application increased 100-seed weight by 45% and 40%, spike length by 8% and 5%, and biological yield by 35% and 25% under heat stress, respectively. Soil Mg showed maximum SPAD chlorophyll values; however, response was statistically similar to that of foliar Mg as compared to the control without Mg supply. Membrane stability decreased (4%) due to heat stress while foliar and soil treatments improved membrane stability by 8% and 5% compared to that of the control, respectively. Thus, Mg application through soil or plant foliage can be an effective way to reduce negative impacts of terminal heat in wheat by improving pollen viability at anthesis and 100-seed weight that was attributed to increased chlorophyll contents during anthesis.

Deep learning-based high-throughput detection of in vitro germination to assess pollen viability from microscopic images

In vitro pollen germination is considered the most efficient method to assess pollen viability. The pollen germination frequency and pollen tube length, which are key indicators of pollen viability, should be accurately measured during in vitro culture. In this study, a Mask R-CNN model trained using microscopic images of tree peony (Paeonia suffruticosa) pollen has been proposed to rapidly detect the pollen germination rate and pollen tube length. To reduce the workload during image acquisition, images of synthesized crossed pollen tubes were added to the training dataset, significantly improving the model accuracy in recognizing crossed pollen tubes. At an Intersection over Union threshold of 50%, a mean average precision of 0.949 was achieved. The performance of the model was verified using 120 testing images. The R2 value of the linear regression model using detected pollen germination frequency against the ground truth was 0.909 and that using average pollen tube length was 0.958. Further, the model was successfully applied to two other plant species, indicating a good generalizability and potential to be applied widely.

Pollen viability, longevity, and function in angiosperms: key drivers and prospects for improvement

Pollen grains are central to sexual plant reproduction and their viability and longevity/storage are critical for plant physiology, ecology, plant breeding, and many plant product industries. Our goal is to present progress in assessing pollen viability/longevity along with recent advances in our understanding of the intrinsic and environmental factors that determine pollen performance: the capacity of the pollen grain to be stored, germinate, produce a pollen tube, and fertilize the ovule. We review current methods to measure pollen viability, with an eye toward advancing basic research and biotechnological applications. Importantly, we review recent advances in our understanding of how basic aspects of pollen/stigma development, pollen molecular composition, and intra- and intercellular signaling systems interact with the environment to determine pollen performance. Our goal is to point to key questions for future research, especially given that climate change will directly impact pollen viability/longevity. We find that the viability and longevity of pollen are highly sensitive to environmental conditions that affect complex interactions between maternal and paternal tissues and internal pollen physiological events. As pollen viability and longevity are critical factors for food security and adaptation to climate change, we highlight the need to develop further basic research for better understanding the complex molecular mechanisms that modulate pollen viability and applied research on developing new methods to maintain or improve pollen viability and longevity.

Characterization of pollen tube development in distant hybridization of Chinese cork oak (Quercus variabilis L.)

MAIN CONCLUSION

This work mainly found that the stigma and style of Q. variabilis did not completely lose the specific recognition towards heterologous pollen, a fact which is different from previous studies. Quercus is the foundation species in the Northern Hemisphere, with extreme prevalence for interspecific hybridization. It is not yet entirely understood whether or how the pollen tube-female tissue interaction contributes to the "extensive hybridization" in oaks. Pollen storage conditions correlate with distant hybridization. We conducted hybridization experiments with Q. variabilis as female and Q. variabilis and Q. mongolica as male parents. And the differences in pollen tube (PT) development between intra- and distant interspecific hybridization were studied by fluorescence microscopy and scanning electron microscopy (SEM). Our results showed that -20 °C allowed pollen of both species to maintain some viability. Both Q. variabilis and Q. mongolica pollen germinated profusely on the stigmas. SEM results indicated that in the intraspecific hybridization, Q. variabilis pollen started to germinate at 6 h after pollination (hap), PTs elongated significantly at 12 hap, and entered the stigma at 24 hap. By contrast, Q. mongolica pollen germinated at 15 hap, and the PTs entered the stigma at 27 hap. By fluorescence microscopical studies it was observed that some PTs of Q. variabilis gathered at the style-joining at 96 hap, unlike the Q. mongolica which reached the style junction at 144 hap. The above results indicate that the abundant germination of heterologous pollen (HP) on the stigma and the "Feeble specificity recognition" of the stigma and transmitting tract to HP may create opportunities for the "extensive hybridization" of oaks. This work provides a sexual developmental reference for clarifying the causes of Quercus "extensive hybridization".

Electrical Characterization and Analysis of Single Cells and Related Applications

Biological parameters extracted from electrical signals from various body parts have been used for many years to analyze the human body and its behavior. In addition, electrical signals from cancer cell lines, normal cells, and viruses, among others, have been widely used for the detection of various diseases. Single-cell parameters such as cell and cytoplasmic conductivity, relaxation frequency, and membrane capacitance are important. There are many techniques available to characterize biomaterials, such as nanotechnology, microstrip cavity resonance measurement, etc. This article reviews single-cell isolation and sorting techniques, such as the micropipette separation method, separation and sorting system (dual electrophoretic array system), DEPArray sorting system (dielectrophoretic array system), cell selector sorting system, and microfluidic and valve devices, and discusses their respective advantages and disadvantages. Furthermore, it summarizes common single-cell electrical manipulations, such as single-cell amperometry (SCA), electrical impedance sensing (EIS), impedance flow cytometry (IFC), cell-based electrical impedance (CEI), microelectromechanical systems (MEMS), and integrated microelectrode array (IMA). The article also enumerates the application and significance of single-cell electrochemical analysis from the perspectives of CTC liquid biopsy, recombinant adenovirus, tumor cells like lung cancer DTCs (LC-DTCs), and single-cell metabolomics analysis. The paper concludes with a discussion of the current limitations faced by single-cell analysis techniques along with future directions and potential application scenarios.

A Novel Method for Stimulating Cannabis sativa L. Male Flowers from Female Plants

Female hemp plants are desired in floral hemp operations due to their higher cannabinoid contents. To produce feminized seeds, a critical step of inducing fertile male flowers on female plants is performed. In feminized seed production, freshly mixed STS (silver thiosulfate + sodium thiosulfate) is applied to female plants as an ethylene inhibitor to induce male flowers. However, the short-shelf stability of the STS buffer can cause difficulty in the application and inconsistent results. Alternative methods with improved accessibility and stable buffers will be beneficial for the hemp industry and hemp breeders. A commercially available floriculture product, Chrysal ALESCO®, contains silver nitrate, the same active ingredient as STS but with increased shelf stability. This study compares Chrysal ALESCO® to the traditional STS standard methods for male flower induction on female plants and their pollen quality. The two treatments were applied to six female hemp accessions with three replicates investigated, and the male flower counts and pollen quality were compared. No statistically significant difference was discovered in their male flower counts; the STS-treated plant produced an average of 478.18 male flowers, and the Chrysal ALESCO®-treated plant produced an average of 498.24 male flowers per plant. Fluorescein diacetate (FDA) and acetocarmine stains were used to investigate the pollen quality (non-aborted rate) of two chosen genotypes. FDA-stained pollen of Chrysal ALESCO® showed a significantly higher non-aborted rate than the pollen of traditional STS-treated plants (p < 0.001); however, only a marginally higher non-aborted rate was discovered by acetocarmine staining (p = 0.0892). In summary, Chrysal ALESCO® performed equally to traditional STS treatment at male flower counts and better or equally in pollen quality. With better shelf stability and easy application, ALESCO® can be a viable alternative option for stimulating male flowers on female hemp plants.

Optimization of In Vitro Germination, Viability Tests and Storage of Paeonia ostii Pollen

Paeonia ostii is an important woody oil crop mainly cross-pollinated. However, the low yield has become an important factor restricting the industrial development of P. ostii. Cross-pollination has become one of the important measures to increase the seed yield. Therefore, conservation of pollen with high vitality is crucial to ensure successful pollination of P. ostii. In this study, we found an effective methodological system to assess the viability, ability to germinate, and optimal storage conditions of P. ostii pollen grains. The optimal medium in vitro was 50 g/L sucrose, 100 mg/L boric acid, 50 g/L PEG6000, 100 mg/L potassium nitrate, 300 mg/L calcium nitrate, and 200 mg/L magnesium sulfate at pH 5.4. Optimal germination condition in vitro was achieved at 25 °C for 120 min, allowing easy observation of the germination percentage and length of the pollen tubes. In addition, the viability of pollen grains was assessed by comparing nine staining methods. Among them, MTT, TTC, benzidine-H₂O₂, and FDA were effective to distinguish between viable and non-viable pollen, and the results of the FDA staining method were similar to the pollen germination percentage in vitro. After evaluation of pollen storage, thawing and rehydration experiments showed that thawing at 4 °C for 30 min and rehydration at 25 °C for 30 min increased the germination percentage of pollen grains stored at low temperatures. The low-temperature storage experiments showed that 4 °C was suitable for short-term storage of P. ostii pollen grains, while -80 °C was suitable for long-term storage. This is the first report on the in vitro germination, viability tests, and storage of P. ostii pollen grains, which will provide useful information for P. ostii germplasm conservation and artificial pollination.

The Effects of Growth Modification on Pollen Development in Spring Barley (Hordeum vulgare L.) Genotypes with Contrasting Drought Tolerance

Drought stress inducing pollen sterility can reduce crop yield worldwide. The regulatory crosstalk associated with the effects of drought on pollen formation at the cellular level has not been explored in detail so far. In this study, we performed morphological and cytoembryological analysis of anther perturbations and examined pollen development in two spring barley genotypes that differ in earliness and drought tolerance. The Syrian breeding line CamB (drought-tolerant) and the European cultivar Lubuski (drought-sensitive) were used as experimental materials to analyze the drought-induced changes in yield performance, chlorophyll fluorescence kinetics, the pollen grain micromorphology and ultrastructure during critical stages of plant development. In addition, fluctuations in HvGAMYB expression were studied, as this transcription factor is closely associated with the development of the anther. In the experiments, the studied plants were affected by drought, as was confirmed by the analyses of yield performance and chlorophyll fluorescence kinetics. However, contrary to our expectations, the pollen development of plants grown under specific conditions was not severely affected. The results also suggest that growth modification, as well as the perturbation in light distribution, can affect the HvGAMYB expression. This study demonstrated that the duration of the vegetation period can influence plant drought responses and, as a consequence, the processes associated with pollen development as every growth modification changes the dynamics of drought effects as well as the duration of plant exposition to drought.

The effects of heading time on yield performance and HvGAMYB expression in spring barley subjected to drought

In the lifetime of a plant, flowering is not only an essential part of the reproductive process but also a critical developmental stage that can be vulnerable to environmental stresses. To ensure survival during drought, plants accelerate the flowering process, and this response is known as "drought escape." HvGAMYB-transcription factor associated, among others, with flowering process and anther development in barley-has also an important role in developmental modification and yield performance in plants subjected to stressed conditions. Due to the fact that information about the mechanisms associated both with the flowering acceleration and the anther or pollen disruption is limited, the exploration of the potential HvGAMYB role in flower development may shed light on pollen and spike morphology formations in plants grown under unfavorable water conditions. The aim of this study was to characterize differences in responses to drought among early- and late-heading barley genotypes. These two subgroups of plants-differentiated in terms of phenology-were analyzed, and traits linked to plant phenotype, physiology, and yield were investigated. In our study, the drought stress reactions of two barley subgroups showed a wide range of diversity in terms of yield performance, anther morphology, chlorophyll fluorescence kinetics, and pollen viability. The studied plants exhibited different yield performances under control and drought conditions. Moreover, the random distribution of genotypes on the biplot showing variability of OJIP parameters in the second developmental point of our investigation revealed that prolonged drought stress caused that among early- and late-heading plants, the studied genotypes exhibited different responses to applied stress conditions. The results of this study also showed that the HvGAMYB expression level was correlated positively with traits associated with lateral spike morphology in the second developmental point of this investigation, which showed that this association occurred only under prolonged drought and highlighted the drought stress duration effect on the HvGAMYB expression level.

A Simple Micromilled Microfluidic Impedance Cytometer with Vertical Parallel Electrodes for Cell Viability Analysis

Microfluidic impedance cytometry has been demonstrated as an effective platform for single cell analysis, taking advantage of microfabricated features and dielectric cell sensing methods. In this study, we present a simple microfluidic device to improve the sensitivity, accuracy, and throughput of single suspension cell viability analysis using vertical sidewall electrodes fabricated by a widely accessible negative manufacturing method. A microchannel milled through a 75 µm platinum wire, which was embedded into poly-methyl-methacrylate (PMMA), created a pair of parallel vertical sidewall platinum electrodes. Jurkat cells were interrogated in a custom low-conductivity buffer (1.2 ± 0.04 mS/cm) to reduce current leakage and increase device sensitivity. Confirmed by live/dead staining and electron microscopy, a single optimum excitation frequency of 2 MHz was identified at which live and dead cells were discriminated based on the disruption in the cell membrane associated with cell death. At this frequency, live cells were found to exhibit changes in the impedance phase with no appreciable change in magnitude, while dead cells displayed the opposite behavior. Correlated with video microscopy, a computational algorithm was created that could identify cell detection events and determine cell viability status by application of a mathematical correlation method.

Pollen viability-based heat susceptibility index (HSIpv): A useful selection criterion for heat-tolerant genotypes in wheat

Terminal heat stress during reproductive stage in wheat (Triticum aestivum L.) causes pollen grain sterility and has a drastic impact on wheat crop production. Finding genotypes with high pollen viability under heat stress is crucial to cope with the impact of climate change through developing heat-tolerant cultivars. To assess the effect of terminal heat stress on pollen viability in a panel of spring wheat genotypes (N = 200), RCBD (randomized complete block design) field trials were conducted under normal and heat stress conditions for two consecutive years (2020-2021 and 2021-2022). Analysis of variance showed significant variation in genotypes, treatments, and genotype × treatment interaction. Fifty and 46 genotypes were categorized as heat tolerant (HSI _pv < 0.5) in the first and second year, respectively. Twelve genotypes, namely, Chenab-70, Pari-73, Pak-81, MH-21, Punjab-76, NIFA-Aman, NUWYT-63, Swabi-1, Nisnan-21, Frontana, Amin-2000, and Pirsabak-2004, were found to be heat tolerant across the years. The violin plot displayed a trend of improvement in heat tolerance (HSI _pv < 0.5) over the period of time in many modern wheat varieties. However, some modern wheat varieties released after 2001 such as Janbaz-09 (57%), Ghazi-2019 (57%), and Sindhu-16 (43%) had very low pollen viability under heat stress conditions. The results of phenotypic coefficient of variance (PCV%), genotypic coefficient of variance (GCV%), broad sense heritability (h² _bs), and genetic advance (GA) suggested the major contribution of genetic factors in controlling pollen viability trait. Higher values of h² _bs and GA under heat stress conditions suggested pollen viability as a heat tolerance trait controlled by additive genetic effects. Taken together, these results suggested pollen viability as a useful trait for selection in early generations under elevated temperatures. The genotypes identified as heat tolerant in both years can be used as genetic resources for breeding cultivars with higher pollen viability under elevated temperature conditions.

Optimization of culture medium for in vitro germination and storage conditions of Exochorda racemosa pollen

Pollen morphology, pollen vigor, and long-term pollen storage are critical for plant cross-breeding and genetic improvement of Exochorda racemosa. We developed a protocol for viability determination and storage of E. racemosa pollen for breeding new varieties. The medium components for E. racemosa pollen germination was optimized by using an Orthogonal Assay Test Strategy (OATS). The germination rates of E. racemosa pollen were investigated after storing at different temperatures and different storage periods. The size of E. racemosa pollen was medium with three germination ditches, and the sculptural type of pollen was striate. Red ink and 2,3,5-triphenyl tetrazolium chloride (TTC) can effectively distinguish viable pollen from the unviable pollen of E. racemosa. The most suitable medium (CK2) for E. racemosa was composed of 150 g· L^-1 sucrose, 100 mg·L^-1 boric acid, 150 mg· L^-1 Ca(NO₃)₂ and 50 mg· L^-1 GA₃. Low-temperature stress produced the greater inhibition of pollen tube growth compared with high-temperature conditions. The CK2 medium at pH 6.5 resulted in the highest pollen germination rate and most extended pollen tube length. The optimal temperature for storage of dried pollen was -80°C (P < 0.01), and the germination rate was 53.60% after storage for 390 days. Thawing in a 35°C water bath produced the best viability of E. racemosa pollen after storage at -20°C and -80°C. The short-term storage of E. racemosa fresh pollen at 4°C was better than that at -20°C and -80°C (P < 0.01). It is possible to evaluate pollen quality and store pollen grains for E. racemosa by the parameters defined in this study.

AtZAT4, a C2H2-Type Zinc Finger Transcription Factor from Arabidopsis thaliana, Is Involved in Pollen and Seed Development

Pollen plays an essential role in plant fertility by delivering the male gametes to the embryo sac before double fertilization. In several plant species, including Arabidopsis, C2H2-type zinc-finger transcription factors (TFs) have been involved in different stages of pollen development and maturation. ZINC FINGER of Arabidopsis thaliana 4 (AtZAT4) is homologous to such TFs and subcellular localization analysis has revealed that AtZAT4 is located in the nucleus. Moreover, analysis of AtZAT4 expression revealed strong levels of it in flowers and siliques, suggesting a role of the encoded protein in the regulation of genes that are associated with reproductive development. We characterized a T-DNA insertional heterozygous mutant Atzat4 (+/−). The relative gene expression analysis of Atzat4 (+/−) showed significant transcript reductions in flowers and siliques. Furthermore, the Atzat4 (+/−) phenotypic characterization revealed defects in the male germline, showing a reduction in pollen tube germination and elongation. Atzat4 (+/−) presented reduced fertility, characterized by a smaller silique size compared to the wild type (WT), and a lower number of seeds per silique. Additionally, seeds displayed lower viability and germination. Altogether, our data suggest a role for AtZAT4 in fertilization and seed viability, through the regulation of gene expression associated with reproductive development.

Methods for characterizing pollen fitness in Cannabis sativa L

Pollen grains are male gametophytes, an ephemeral haploid generation of plants, that commonly engage in competition for a limited supply of ovules. Since variation in reproductive capabilities among male gametophytes may influence the direction and pace of evolution in populations, we must be able to quantify the relative fitness of gametophytes from different sires. To explore this, we estimated the relative fitness of groups of male gametophytes in a dioecious, wind-pollinated model system, Cannabis sativa, by characterizing the non-abortion rate (measured via chemical staining) and viability (measured via in vitro germination) of pollen from multiple sires. Pollen viability quickly declined within two weeks of anther dehiscence, and pollen stored under freezer conditions did not germinate regardless of storage time. In contrast, pollen non-abortion rates declined slowly and persisted longer than the lifetime of a sporophyte plant under both room temperature and freezer conditions. Pollen samples that underwent both viability and non-abortion rate analysis displayed no significant correlation, implying that researchers cannot predict pollen viability from non-abortion rates, nor infer male gametophytic fitness from a single measure. Our work demonstrates two independent, differential approaches to measure proxies of male fitness in C. sativa.

Pollen viability as a potential trait for screening heat-tolerant wheat (Triticum aestivum L.)

High temperature during reproductive stage of winter crops causes sterility of pollen grains and reduced yield. It is essential to find the genotypes with higher pollen viability, as it is most sensitive to temperature extremes. A field study was conducted with wheat (Triticum aestivum L.) genotypes to understand the effect of high temperature on pollen viability and grain yield for 2years under timely (TS) and late sown (LS) conditions. A strong correlation was observed between higher pollen viability and higher grain yield under heat stress condition. Genotypes like K7903, HD2932, WH730 and RAJ3765 showed higher pollen viability, whereas DBW17, HUW468, RAJ4014 and UP2425 had lower pollen viability under LS condition. Further, the quantification of antioxidant enzymes activity mainly, Super oxide dismutase (SOD), Catalase (CAT), Peroxidase (POD) and Glutathione peroxidase (GPX) has showed significant variation among study genotypes. Thus, the identified high pollen viability genotypes can serve as a potential source for trait based breeding under heat stress in wheat. The present study is a first of its kind to assess more number of wheat genotypes for pollen viability and antioxidants activity under field condition. It also confirms that pollen viability can be used as a potential trait to screen genotypes for heat stress tolerance in wheat.

A protocol for Chenopodium quinoa pollen germination

BACKGROUND

Quinoa is an increasingly popular seed crop frequently studied for its tolerance to various abiotic stresses as well as its susceptibility to heat. Estimations of quinoa pollen viability through staining methods have resulted in conflicting results. A more effective alternative to stains is to estimate pollen viability through in vitro germination. Here we report a method for in vitro quinoa pollen germination that could be used to understand the impact of various stresses on quinoa fertility and therefore seed yield or to identify male-sterile lines for breeding.

RESULTS

A semi-automated method to count germinating pollen was developed in PlantCV, which can be widely used by the community. Pollen collected on day 4 after first anthesis at zeitgeber time 5 was optimum for pollen germination with an average germination of 68% for accession QQ74 (PI 614886). The optimal length of pollen incubation was found to be 48 h, because it maximizes germination rates while minimizing contamination. The pollen germination medium's pH, boric acid, and sucrose concentrations were optimized. The highest germination rates were obtained with 16% sucrose, 0.03% boric acid, 0.007% calcium nitrate, and pH 5.5. This medium was tested on quinoa accessions QQ74, and cherry vanilla with 68%, and 64% germination efficiencies, respectively.

CONCLUSIONS

We provide an in vitro pollen germination method for quinoa with average germination rates of 64 and 68% on the two accessions tested. This method is a valuable tool to estimate pollen viability in quinoa, and to test how stress affects quinoa fertility. We also developed an image analysis tool to semi-automate the process of counting germinating pollen. Quinoa produces many new flowers during most of its panicle development period, leading to significant variation in pollen maturity and viability between different flowers of the same panicle. Therefore, collecting pollen at 4 days after first anthesis is very important to collect more uniformly developed pollen and to obtain high germination rates.

Impact of drying and cooling rate on the survival of the desiccation-sensitive wheat pollen

Fast-drying and cooling induce fast intracellular water loss and reduced ice-crystal formation, which may promote the formation of intracellular glasses that might improve the likelihood of wheat pollen survival. Long-term storage of pollen is important for the fertilization of spatially or temporally isolated female parents, especially in hybrid breeding. Wheat pollen is dehydration-sensitive and rapidly loses viability after shedding. To preserve wheat pollen, we hypothesized that fast-drying and cooling rates would increase the rate of intracellular water content (WC) removal, decrease intracellular ice-crystal formation, and increase viability after exposure to ultra-low temperatures. Therefore, we compared slow air-drying with fast-drying (dry air flow) and found significant correlations between pollen WC and viability (r = 0.92, P < 0.001); significant differences in WCs after specific drying times; and comparable viabilities after drying to specific WCs. Fast-drying to WCs at which ice melting events were not detected (ΔH = 0 J mg^-1 DW, < 0.28 mg H₂O mg^-1 DW) reduced pollen viability to 1.2 ± 1.0%, but when drying to 0.39 mg H₂O mg^-1 DW, some viable pollen was detected (39.4 ± 17.9%). Fast cooling (150 °C min^-1) of fast-dried pollen to 0.91 ± 0.11 mg H₂O mg^-1 DW induced less and a delay of ice-crystal formation during cryomicroscopic-video-recordings compared to slow cooling (1 °C min^-1), but viability was low (4.5-6.1%) and comparable between cooling rates. Our data support that the combination of fast-drying and cooling rates may enable the survival of wheat pollen likely due to (1) a reduction of the time pollen would be exposed to drying-related deleterious biochemical changes and (2) an inhibition of intracellular ice-crystal formation, but additional research is needed to obtain higher pollen survival after cooling.

Potential of Impedance Flow Cytometry to Assess the Viability and Quantity of Cannabis sativa L. Pollen

Over the last decade, efforts to breed new Cannabis sativa L. cultivars with high Cannabidiol (CBD) and other non-psychoactive cannabinoids with low tetrahydrocannabinol (THC) levels have increased. In this context, the identification of the viability and quantity of pollen, which represents the fitness of male gametophytes, to accomplish successful pollination is of high importance. The present study aims to evaluate the potential of impedance flow cytometry (IFC) for the assessment of pollen viability (PV) and total number of pollen cells (TPC) in two phytocannabinoid-rich cannabis genotypes, KANADA (KAN) and A4 treated with two different chemical solutions, silver thiosulfate solution (STS) and gibberellic acid (GA3). Pollen was collected over a period of 8 to 24 days after flowering (DAF) in a greenhouse experiment. Impedance flow cytometry (IFC) technology was used with Cannabis sativa to assess the viability and quantity of pollen. The results showed that the number of flowers per plant was highest at 24 DAF for both genotypes, A4 (317.78) and KAN (189.74). TPC induced by STS was significantly higher compared to GA3 over the collection period of 8 to 24 DAF with the highest mean TPC of 1.54 × 105 at 14 DAF. STS showed significantly higher viability of pollen compared to GA3 in genotype KAN, with the highest PV of 78.18% 11 DAF. Genotype A4 also showed significantly higher PV with STS at 8 (45.66%), 14 (77.88%), 18 (79.37%), and 24 (51.92%) DAF compared to GA3. Furthermore, counting the numbers of flowers did not provide insights into the quality and quantity of pollen; the results showed that PV was highest at 18 DAF with A4; however, the number of flowers per plant was 150.33 at 18 DAF and was thus not the maximum of produced flowers within the experiment. IFC technology successfully estimated the TPC and differentiated between viable and non-viable cells over a period of 8 to 24 DAF in tested genotypes of Cannabis sativa. IFC seems to be an efficient and reliable method to estimate PV, opening new chances for plant breeding and plant production processes in cannabis.

Recent Advances in Electrical Impedance Sensing Technology for Single-Cell Analysis

Cellular heterogeneity is of significance in cell-based assays for life science, biomedicine and clinical diagnostics. Electrical impedance sensing technology has become a powerful tool, allowing for rapid, non-invasive, and label-free acquisition of electrical parameters of single cells. These electrical parameters, i.e., equivalent cell resistance, membrane capacitance and cytoplasm conductivity, are closely related to cellular biophysical properties and dynamic activities, such as size, morphology, membrane intactness, growth state, and proliferation. This review summarizes basic principles, analytical models and design concepts of single-cell impedance sensing devices, including impedance flow cytometry (IFC) to detect flow-through single cells and electrical impedance spectroscopy (EIS) to monitor immobilized single cells. Then, recent advances of both electrical impedance sensing systems applied in cell recognition, cell counting, viability detection, phenotypic assay, cell screening, and other cell detection are presented. Finally, prospects of impedance sensing technology in single-cell analysis are discussed.

Two Is Company, but Four Is a Party-Challenges of Tetraploidization for Cell Wall Dynamics and Efficient Tip-Growth in Pollen

Some cells grow by an intricately coordinated process called tip-growth, which allows the formation of long tubular structures by a remarkable increase in cell surface-to-volume ratio and cell expansion across vast distances. On a broad evolutionary scale, tip-growth has been extraordinarily successful, as indicated by its recurrent 're-discovery' throughout evolutionary time in all major land plant taxa which allowed for the functional diversification of tip-growing cell types across gametophytic and sporophytic life-phases. All major land plant lineages have experienced (recurrent) polyploidization events and subsequent re-diploidization that may have positively contributed to plant adaptive evolutionary processes. How individual cells respond to genome-doubling on a shorter evolutionary scale has not been addressed as elaborately. Nevertheless, it is clear that when polyploids first form, they face numerous important challenges that must be overcome for lineages to persist. Evidence in the literature suggests that tip-growth is one of those processes. Here, I discuss the literature to present hypotheses about how polyploidization events may challenge efficient tip-growth and strategies which may overcome them: I first review the complex and multi-layered processes by which tip-growing cells maintain their cell wall integrity and steady growth. I will then discuss how they may be affected by the cellular changes that accompany genome-doubling. Finally, I will depict possible mechanisms polyploid plants may evolve to compensate for the effects caused by genome-doubling to regain diploid-like growth, particularly focusing on cell wall dynamics and the subcellular machinery they are controlled by.

Impact of Storage Temperature on Pollen Viability and Germinability of Four Serbian Autochthon Apple Cultivars

Globalization has drastically reduced the number of autochthon apple cultivars in the Serbian market and most of them have nearly disappeared; however, some of these cultivars, such as Petrovača, Budimka, Kolačara Pozna, and Kožara, have extraordinary quality, good pomological characteristics, and pest and disease resistance. The present study was conducted to develop a protocol for the storage of pollen for further use in the conservation and breeding of these cultivars. Viability and germination of the mature pollen were tested in vitro, at four storage temperatures (20, 4, -20, and -80°C), right after harvest or 1, 2, 3, 4, 5, and 6 months after storage. Differences in fresh pollen viability and germination between cultivars were statistically significant and ranged from 60 to 88% and 59 to 98%, respectively. Fresh pollen of cv. Budimka showed the highest viability and germination in comparison with other cultivars, especially cv. Kožara. Pollen viability and germination decreased over the storage period, and it was the lowest after 6 months of storage at room temperature in all tested cultivars. Storage at 4°C prolonged the pollen viability and germinability of 1-5 fold, depending on the cultivar and treatment duration; however, the pollen longevity of all cultivars was significantly extended when stored at -20 or -80°C. After 6 months, pollen of cv. Budimka stored at -20 and -80°C showed 14-15 fold higher germination rates in relation to pollen storage at room temperature for the same period. The results of the present study suggest that the pollen of these apple cultivars could be efficiently maintained at -20°C and could be further used for breeding purposes, e.g., for crossings between cultivars that flower at different times of the year.

Novel Metrics to Characterize In Vitro Pollen Tube Growth Performance of Apple Cultivars

In vitro germination assays are frequently used in screening trials to evaluate the pollen viability of pollinizers. To be effective, screening trials must have defined threshold criteria, from which individuals can then be assessed. However, despite decades of research on pollen viability, no established threshold is available to categorize apple cultivars based on their in vitro pollen tube lengths. This study aimed to identify and characterize the subgroups of cultivars based on their pollen tube growth performance. In vitro pollen tube lengths of 41 individuals were determined by incubating samples on artificial germination media at 15 and 25 °C. A six-number summary statistic was calculated, and hierarchical clustering on principal component (HCPC) analysis was used to determine and characterize subgroups. Furthermore, a decision tree model was used to predict class membership for future datasets. HCPC analysis partitioned the 41 individuals into three subgroups with different performances. The decision tree quickly predicted the cluster membership based on the second quartile at 15 °C and the third quartile at 25 °C. The thresholds from the decision tree can be used to characterize new observations. The use of the methods will be demonstrated using a case study with 29 apple accessions.

A Compendium of in vitro Germination Media for Pollen Research

The correct choice of in vitro pollen germination media (PGM) is crucial in basic and applied pollen research. However, the methodological gaps (e.g., strong focus of current research on model species and cultivated plants along with the lack of general rules for developing a PGM) makes experimenting with pollen difficult. We closed these gaps by compiling a compendium of optimized in vitro PGM recipes from more than 1800 articles published in English, German, and Russian from 1926 to 2019. The compendium includes 1572 PGM recipes successfully used to germinate pollen grains or produce pollen tubes in 816 species representing 412 genera and 114 families (both monocots and dicots). Among the 110 components recorded from the different PGM recipes, sucrose (89% of species), H₃BO₃ (77%), Ca²⁺ (59%), Mg²⁺ (44%), and K⁺ (39%) were the most commonly used PGM components. PGM pH was reported in 35% of all studies reviewed. Also, we identified some general rules for creating PGM for various groups of species differing in area of research (wild and cultivated species), phylogenetic relatedness (angiosperms vs. gymnosperms, dicots vs. monocots), pollen physiology (bi- and tri-cellular), biochemistry (starchy vs. starchless pollen grains), and stigma properties (dry vs. wet), and compared the component requirements. Sucrose, calcium, and magnesium concentrations were significantly different across most categories indicating that pollen sensitivity to sugar and mineral requirements in PGM is highly group-specific and should be accounted for when composing new PGM. This compendium is an important data resource on PGM and can facilitate future pollen research.

The potential of resilient carbon dynamics for stabilizing crop reproductive development and productivity during heat stress

Impaired carbon metabolism and reproductive development constrain crop productivity during heat stress. Reproductive development is energy intensive, and its requirement for respiratory substrates rises as associated metabolism increases with temperature. Understanding how these processes are integrated and the extent to which they contribute to the maintenance of yield during and following periods of elevated temperatures is important for developing climate-resilient crops. Recent studies are beginning to demonstrate links between processes underlying carbon dynamics and reproduction during heat stress, consequently a summation of research that has been reported thus far and an evaluation of purported associations are needed to guide and stimulate future research. To this end, we review recent studies relating to source-sink dynamics, non-foliar photosynthesis and net carbon gain as pivotal in understanding how to improve reproductive development and crop productivity during heat stress. Rapid and precise phenotyping during narrow phenological windows will be important for understanding mechanisms underlying these processes, thus we discuss the development of relevant high-throughput phenotyping approaches that will allow for more informed decision-making regarding future crop improvement.

Productivity performance of peach trees, insecticidal and antibacterial bioactivities of leaf extracts as affected by nanofertilizers foliar application

The current study was performed on eight years old peach (Prunus persica L. Batsch) trees cv. Florida prince to study the influence of spraying of commercial nano fertilizer on vegetative growth, pollen grain viability, yield, and fruit quality of the "Florida prince" peach cultivar. Furthermore, extracts from the nanofertilizer treated leaves were studied for their bioactivity as insecticidal or bactericidal activities against some stored grain insects and plant bacterial pathogens. Seventy uniform peach trees were sprayed three time as follow: before flowering; during full bloom, and one month later in addition using the water as a control. Commercial silver particales (Ag NPs) at 10, 12.5, and 15 mL/L and zinc particales (Zn NPs) at 2.5, 5 and 7.5 mL/L as recommended level in a randomized complete block design in ten replicates/trees. Spraying Ag NP at 15 mL/L increased shoot diameter, leaf area, total chlorophyll, flower percentage, fruit yield and fruit physical and chemical characteristics, followed by Ag NPs at 12.5 mL/L and Zn NPs at 7.5 mL/L. Moreover, Zn and Ag NPs caused a highly significant effect on pollen viability. Different type of pollen aberrations were detected by Zn NPs treatment. The commercial Ag NPs showed a high increase in pollen viability without any aberrations. The Ag NPs significantly increased the pollen size, and the spores also increased and separated in different localities, searching about the egg for pollination and fertilization. Peach leaves extract was examined for their insecticidal activity against rice weevil (Sitophilus oryzea L.) and the lesser grain borer (Rhyzopertha dominica, Fabricius) by fumigation method. The antibacterial activity of all treatments was also performed against molecularly identified bacteria. Ag NPs treated leaves extract at concentration 3000 µg/mL were moderate sufficient to inhibit all the bacterial isolates with inhibition zone (IZ) ranged 6-8.67 mm with high efficiency of acetone extracts from leaves treated with Ag NPs compared with Zn NPs. Also, S. oryzae was more susceptible to acetone extracts from leaves treated with both nanomaterials than R. dominica.

Genome-Wide Association and Prediction of Male and Female Floral Hybrid Potential Traits in Elite Spring Bread Wheat Genotypes

Hybrid wheat breeding is one of the most promising technologies for further sustainable yield increases. However, the cleistogamous nature of wheat displays a major bottleneck for a successful hybrid breeding program. Thus, an optimized breeding strategy by developing appropriate parental lines with favorable floral trait combinations is the best way to enhance the outcrossing ability. This study, therefore, aimed to dissect the genetic basis of various floral traits using genome-wide association study (GWAS) and to assess the potential of genome-wide prediction (GP) for anther extrusion (AE), visual anther extrusion (VAE), pollen mass (PM), pollen shedding (PSH), pollen viability (PV), anther length (AL), openness of the flower (OPF), duration of floret opening (DFO) and stigma length. To this end, we employed 196 ICARDA spring bread wheat lines evaluated for three years and genotyped with 10,477 polymorphic SNP. In total, 70 significant markers were identified associated to the various assessed traits at FDR ≤ 0.05 contributing a minor to large proportion of the phenotypic variance (8–26.9%), affecting the traits either positively or negatively. GWAS revealed multi-marker-based associations among AE, VAE, PM, OPF and DFO, most likely linked markers, suggesting a potential genomic region controlling the genetic association of these complex traits. Of these markers, Kukri_rep_c103359_233 and wsnp_Ex_rep_c107911_91350930 deserve particular attention. The consistently significant markers with large effect could be useful for marker-assisted selection. Genomic selection revealed medium to high prediction accuracy ranging between 52% and 92% for the assessed traits with the least and maximum value observed for stigma length and visual anther extrusion, respectively. This indicates the feasibility to implement genomic selection to predict the performance of hybrid floral traits with high reliability.

Optimized Protocol for In Vitro Pollen Germination in Yam (Dioscorea spp.)

Yam (Dioscorea spp.) plants are mostly dioecious and sometimes monoecious. Low, irregular, and asynchronous flowering of the genotypes are critical problems in yam breeding. Selecting suitable pollen parents and preserving yam pollen for future use are potential means of controlling these constraints and optimizing hybridization practice in yam breeding programs. However, implementing such procedures requires a robust protocol for pollen collection and viability testing to monitor pollen quality in the field and in storage. This study, therefore, aimed at optimizing the pollen germination assessment protocol for yam. The standard medium composition was stepwisely modified, the optimal growth condition was tested, and in vivo predictions were made. This study showed that the differences in yam pollen germination percentage are primarily linked to the genotype and growing conditions (i.e., medium viscosity, incubation temperature, and time to use) rather than the medium composition. The inclusion of polyethylene glycol (PEG) in the culture medium caused 67–75% inhibition of germination in D. alata. Although the in vivo fertilization was dependent on female parents, the in vitro germination test predicted the percentage fruit set at 25.2–79.7% and 26.4–59.7% accuracy for D. rotundata and D. alata genotypes, respectively. This study provides a reliable in vitro yam pollen germination protocol to support pollen management and preservation efforts in yam breeding.

Flow cytometric analysis of pollen and spores: An overview of applications and methodology

Pollen grains are the male gametophytes in a seed-plant life cycle. Their small, particulate nature and crucial role in plant reproduction have made them an attractive object of study using flow cytometry (FCM), with a wide range of applications existing in the literature. While methodological considerations for many of these overlap with those for other tissue types (e.g., general considerations for the measurement of nuclear DNA content), the relative complexity of pollen compared to single cells presents some unique challenges. We consider these here in the context of both the identification and isolation of pollen and its subunits, and the types of research applications. While the discussion here mostly concerns pollen, the general principles described here can be extended to apply to spores in ferns, lycophytes, and bryophytes. In addition to recommendations provided in more general studies, some recurring and notable issues related specifically to pollen and spores are highlighted.

Single-cell microfluidic impedance cytometry: from raw signals to cell phenotypes using data analytics

The biophysical analysis of single-cells by microfluidic impedance cytometry is emerging as a label-free and high-throughput means to stratify the heterogeneity of cellular systems based on their electrophysiology. Emerging applications range from fundamental life-science and drug assessment research to point-of-care diagnostics and precision medicine. Recently, novel chip designs and data analytic strategies are laying the foundation for multiparametric cell characterization and subpopulation distinction, which are essential to understand biological function, follow disease progression and monitor cell behaviour in microsystems. In this tutorial review, we present a comparative survey of the approaches to elucidate cellular and subcellular features from impedance cytometry data, covering the related subjects of device design, data analytics (i.e., signal processing, dielectric modelling, population clustering), and phenotyping applications. We give special emphasis to the exciting recent developments of the technique (timeframe 2017-2020) and provide our perspective on future challenges and directions. Its synergistic application with microfluidic separation, sensor science and machine learning can form an essential toolkit for label-free quantification and isolation of subpopulations to stratify heterogeneous biosystems.

Light promoted brown staining of protoplasm by Ag+ is ideal to test wheat pollen viability rapidly

Pollen viability is crucial for wheat breeding programs. The unique potential of the protoplasm of live cells to turn brown due to the synthesis of silver nanoparticles (AgNPs) through rapid photoreduction of Ag+, was exploited for testing wheat pollen viability. Ag+-viability test medium (consisting of 0.5 mM AgNO3 and 300 mM KNO3) incubated with wheat pollen turned brown within 2 min under intense light (~600 μmol photon flux density m-2s-1), but not in dark. The brown medium displayed AgNPs-specific surface plasmon resonance band in its absorption spectrum. Light microscopic studies showed the presence of uniformly stained brown protoplasm in viable pollen incubated with Ag+-viability medium in the presence of light. Investigations with transmission electron microscope coupled with energy dispersive X-ray established the presence of distinct 5-35 nm NPs composed of Ag. Powder X-ray diffraction analysis revealed that AgNPs were crystalline and biphasic composed of Ag0 and Ag2O. Conversely, non-viable pollen and heat-killed pollen did not turn brown on incubation with Ag+-medium in light. We believe that the viable wheat pollen turn brown rapidly by bio-transforming Ag+ to AgNPs through photoreduction. Our findings furnish a novel simplest and rapid method for testing wheat pollen viability.

Hazelnut Pollen Phenotyping Using Label-Free Impedance Flow Cytometry

Impedance flow cytometry (IFC) is a versatile lab-on-chip technology which enables fast and label-free analysis of pollen grains in various plant species, promising new research possibilities in agriculture and plant breeding. Hazelnut is a monoecious, anemophilous species, exhibiting sporophytic self-incompatibility. Its pollen is dispersed by wind in midwinter when temperatures are still low and relative humidity is usually high. Previous research found that hazelnut can be characterized by high degrees of pollen sterility following a reciprocal chromosome translocation occurring in some cultivated genotypes. In this study, IFC was used for the first time to characterize hazelnut pollen biology. IFC was validated via dye exclusion in microscopy and employed to (i) follow pollen hydration over time to define the best pre-hydration treatment for pollen viability evaluation; (ii) test hazelnut pollen viability and sterility on 33 cultivars grown in a collection field located in central Italy, and two wild hazelnuts. The accessions were also characterized by their amount and distribution of catkins in the tree canopy. Pollen sterility rate greatly varied among hazelnut accessions, with one main group of highly sterile cultivars and a second group, comprising wild genotypes and the remaining cultivars, producing good quality pollen. The results support the hypothesis of recurring reciprocal translocation events in Corylus avellana cultivars, leading to the observed gametic semi-sterility. The measured hazelnut pollen viability was also strongly influenced by pollen hydration (R adj 2 = 0.83, P ≤ 0.0001) and reached its maximum at around 6 h of pre-hydration in humid chambers. Viable and dead pollen were best discriminated at around the same time of pollen pre-hydration, suggesting that high humidity levels are required for hazelnut pollen to maintain its functionality. Altogether, our results detail the value of impedance flow cytometry for high throughput phenotyping of hazelnut pollen. Further research is required to clarify the causes of pollen sterility in hazelnut, to confirm the role of reciprocal chromosome translocations and to investigate its effects on plant productivity.