Overview of the Manufacturing Methods of Solid Dispersion Technology for Improving the Solubility of Poorly Water-Soluble Drugs and Application to Anticancer Drugs

An Investigation into the Effect of Maltitol, Sorbitol, and Xylitol on the Formation of Carbamazepine Solid Dispersions Through Thermal Processing

Background: Carbamazepine (CBZ) is a Biopharmaceutical Classification System (BCS) class II drug, that is practically insoluble in water, influencing the oral bioavailability. Polyols are highly hydrophilic crystalline carriers studied for their success in developing solid dispersions (SDs) for improved solubility and dissolution rate. Polyols are generally regarded as safe (GRAS) and maltitol (MAL), xylitol (XYL) and sorbitol (SOR) are among the approved polyols for market use. While xylitol (XYL) and sorbitol, have shown promise in improving the solubility and dissolution rates of poorly soluble drugs, their full potential in the context of improving the solubility of carbamazepine have not been thoroughly investigated. To the best of our knowledge, maltitol (MAL) was not studied previously as a carrier for preparing SDs. Hence, the purpose of this study was to investigate their use in the preparation of CBZ SDs by the fusion method. Methods: CBZ-polyol SDs were prepared in varying molar ratios (2:1, 1:1 and 1:2) and characterised for solid-state nature, solubility and in-vitro dissolution rate. Results: Solid-state characterisation of the CBZ-polyol SDs revealed the existence of the SDs as continuous glass suspensions with fine CBZ crystallites suspended in the amorphous polyol carriers. Among the polyols studied, XYL exhibited good miscibility with CBZ and showed significant improvement in the solubility and dissolution rate. The prepared SDs showed a 2 to 6-folds increase in CBZ solubility and 1.4 to 1.9-folds increase in dissolution rate in comparison with pure CBZ. Conclusions: The study explains the possible use of polyols (XYL and SOR) based SDs of BCS Class II drugs with good glass forming ability for enhanced solubility and dissolution.

Beyond In Vivo, Pharmaceutical Molecule Production in Cell-Free Systems and the Use of Noncanonical Amino Acids Therein

Throughout history, we have looked to nature to discover and copy pharmaceutical solutions to prevent and heal diseases. Due to the advances in metabolic engineering and the production of pharmaceutical proteins in different host cells, we have moved from mimicking nature to the delicate engineering of cells and proteins. We can now produce novel drug molecules, which are fusions of small chemical drugs and proteins. Currently we are at the brink of yet another step to venture beyond nature's border with the use of unnatural amino acids and manufacturing without the use of living cells using cell-free systems. In this review, we summarize the progress and limitations of the last decades in the development of pharmaceutical protein development, production in cells, and cell-free systems. We also discuss possible future directions of the field.

Enhanced dissolution and antibacterial potential of cinacalcet hydrochloride via ternary solid dispersions

Cinacalcet hydrochloride (HCl), a calcium-sensing receptor agonist used to treat hyperparathyroidism, suffers from poor solubility, reducing its bioavailability. Recently, cinacalcet HCl has been probed for repurposing as antibacterial agent. This work investigates cinacalcet HCl's potential as an antibacterial agent and provides a formulation to improve the drug dissolution. Solid dispersion formulations using Poloxamer 407, with and without Soluplus®, were prepared via solvent evaporation and hot melt congealing methods. The resulting formulations were analyzed using differential scanning calorimetry, FTIR spectroscopy, X-ray powder diffraction, and dissolution studies. These formulations significantly enhanced cinacalcet HCl dissolution compared to the unprocessed form, achieving up to a 15-fold increase in Q5 (percent of cinacalcet HCl dissolved after 5 min). The dissolution efficiency rose from 28% for the pure drug to 94.8 and 87.8% for formulations F6 and F7, respectively. Microbiological evaluations confirmed the antibacterial effect of cinacalcet HCl, which was notably increased in the Poloxamer 407 and Soluplus® hybrid formulation (F7) with a MIC of 64-128 µg/ml. Antibiofilm activity was also observed, with qRT-PCR indicating downregulation of biofilm genes (icaA, icaD, and fnbA). This study introduces a cinacalcet HCl formulation prepared using a scalable, green approach, demonstrating significant potential for antimicrobial applications.

Computer-driven formulation development of Ginsenoside Rh2 ternary solid dispersion

(20 S)-Ginsenoside Rh2 is a natural saponin derived from Panax ginseng Meyer (P. ginseng), which showed significantly potent anticancer properties. However, its low water solubility and bioavailability strongly restrict its pharmaceutical applications. The aim of current research is to develop a modified (20 S)-Ginsenoside Rh2 formulation with high solubility, dissolution rate and bioavailability by combined computational and experimental methodology. The "PharmSD" model was employed to predict the optimal polymer for (20 S)-Ginsenoside Rh2 solid dispersion formulations. The solubility of (20 S)-Ginsenoside Rh2 in various polymers was assessed, and the optimal ternary solid dispersion was evaluated across different dissolution mediums. Characterization techniques included the Powder X-ray diffraction (PXRD) and Fourier transform infrared spectroscopy (FTIR). Molecular dynamics simulations were employed to elucidate the formation mechanism of the solid dispersion and the interactions among active pharmaceutical ingredient (API) and excipient molecules. Cell and animal experiments were conducted to evaluate the in vivo performance of the modified formulation. The "PharmSD" solid dispersion model identified Gelucire 44/14 as the most effective polymer for enhancing the dissolution rate of Rh2. Subsequent experiment also confirmed that Gelucire 44/14 outperformed the other selected polymers. Moreover, the addition of the third component, sodium dodecyl sulfate (SDS), in the ternary solid dispersion formulation significantly amplified dissolution rates than the binary systems. Characterization experiments revealed that the API existed in an amorphous state and interacted via hydrogen bonding with SDS and Gelucire. Moreover, molecular modeling results provided additional evidence of hydrogen bonding interactions between the API and excipient molecules within the optimal ternary solid dispersion. Cell experiments demonstrated efflux ratio (EfR) of Rh2 ternary solid dispersion was lower than that of pure Rh2. In vivo experiments revealed that the modified formulation substantially improved the absorption of Rh2 in rats. Our research successfully developed an optimal ternary solid dispersion for Rh2 with high solubility, dissolution rate and bioavailability by integrated computational and experimental tools. The combination of Artificial Intelligence (AI) technology and molecular dynamics simulation is a wise way to support the future formulation development.

Adsorption kinetics and solubilisation of ciprofloxacin in quaternary ammonium-based surface-active compounds: experimental and computational study

The adsorption and aggregation of amphiphiles at different solvent interfaces are of great scientific and technological importance. In this study, interfacial tension measurements of surface-active compounds-ionic liquid 2-dodecyl-2,2dimethylethanolammonium bromide (12Cho.Br) and cationic surfactant cetyltrimethylammonium bromide (CTAB)-were conducted both in the absence and presence of ciprofloxacin (CIP). Equilibrium interfacial tension (EIFT) measurements and conductivity data demonstrate the effect of CIP on the critical micellar concentration and surface excess concentration of 12Cho.Br and CTAB. Additionally, dynamic interfacial tension (DIFT) measurements were performed to compare the interfacial tension of pure 12Cho.Br and CTAB solutions, as well as those in the presence of the drug (with and without 0.3% acetic acid), as a function of time. The DIFT analysis revealed that the adsorption of 12Cho.Br and CTAB at the air-water interface followed a mixed diffusion-adsorption controlled mechanism. The adsorption processes of 12Cho.Br and CTAB molecules were studied over short time intervals (t → 0) and longer time intervals (t → ∞). The adsorption behaviour was correlated with concentration and the presence of energy barriers. In the presence of CIP, the diffusion coefficient was compared to that of the pure 12Cho.Br and CTAB systems to assess its effect on adsorption and to validate the participation of CIP in DIFT relaxations. Additionally, DIFT measurements were employed to investigate CIP solubility in different SAC systems. Data from the relaxation profiles across a range of concentrations were used to determine the solubility limit of the drug molecules. The solubility data obtained from DIFT correlates strongly with the UV spectroscopy results. Furthermore, DFT calculations provide insights into the frontier orbital structures and physicochemical parameters of complex formations.

High-Throughput Microarray Approaches for Predicting the Stability of Drug-Polymer Solid Dispersions

Amorphous solid dispersions (ASDs) offer a well-recognized strategy to improve the effective solubility and, hence, bioavailability of poorly soluble drugs. In this study, we developed an extensive library of a significant number of solid dispersion formulations using a library of chemically diverse drugs combined with a water-soluble polymer (polyvinylpyrrolidone vinyl acetate, PVPVA) at different loadings. These formulations were printed as microarrays of solid dispersion formulations, utilizing minimal material amounts (nanograms). They were subjected to a six-month stability study under accelerated conditions (40 °C and 75% relative humidity). Physical stability outcomes varied significantly among the different drug-polymer combinations, with stability ranging from immediate drug crystallization to several days of stability. The comprehensive data set obtained from this high-throughput screening was used to construct multiple linear regression models to correlate the stability of ASDs with the physicochemical properties of the used Active Pharmaceutical Ingredients (APIs). Our findings reveal that increased stability of ASDs is associated with a lower number of hydrogen bond acceptors alongside a higher overall count of heteroatoms and oxygen atoms in the drug molecules. This suggests that, while heteroatoms and oxygen are abundant, their role as hydrogen bond acceptors is limited due to their specific chemical environments, contributing to overall stability. Additionally, drugs with lower melting points formed more stable ASDs within the polymer matrix. This study, hence, highlights the importance of minimizing repulsive drug-polymer interactions to yield a physically stable ASD. The developed models, validated through Leave-One-Out Cross-Validation, demonstrated good predictability of stability trends. Hence, the high-throughput 2D inkjet printing technique that was used to manufacture the microarrays proved valuable for assessing drug-polymer crystallization onset risks and predicting stability outcomes. In conclusion, this study demonstrates a novel approach to solid dispersion formulation physical stability screening, enhancing efficiency, minimizing material requirements, and expanding the range of samples evaluated. Our findings provide insights into the critical physicochemical properties influencing ASD stability, offering a significant advancement in developing stable ASDs.

Solid dispersion of alectinib HCl: preclinical evaluation for improving bioavailability and establishing an IVIVC model

OBJECTIVE

Alectinib HCl (ALB-HCl) is a BCS class IV molecule with low solubility and low oral bioavailability. Owing to its low bioavailability, a high dose of ALB-HCl is recommended with food to meet clinical efficacy. Thus, there is a need for a delivery system to overcome the bioavailability concerns.

METHODS

Three solid dispersion (SD) formulations (I, II, and III) were evaluated for in-vitro dissolution and in-vivo pharmacokinetics (PK) study in Wistar rats. An in-vitro and in-vivo correlation (IVIVC) model was developed to establish a relationship between in-vitro dissolution data and in-vivo PK data. The formulations were subjected to stability studies.

RESULTS

All formulations showed enhanced dissolution in all the media except Formulation I in FaSSIF media. In-vivo PK studies displayed that Formulation I was inferior to API alone. Formulations II and III (amorphous SD [ASD]) exhibited two-fold higher Cmax and AUC0-last than API alone. Level A IVIVC model was established for Cmax and AUC0-last with an acceptable % prediction error (PE). When evaluated for external predictability, the model was found validated for Cmax (% PE <10%), however, it was inconclusive for AUC0-last (%PE -14.03). Stability studies showed ASD formulations were stable during storage.

CONCLUSION

A stable ASD formulation of ALB-HCl was successfully developed with improved bioavailability. Developing an IVIVC model can act as a surrogate to predict in-vivo performance. The selection of formulation components in ASD shall be rationalized for bioavailability and stability before clinical evaluation.

Quantitative Analysis of Physical Stability Mechanisms of Amorphous Solid Dispersions by Molecular Dynamic Simulation

Amorphous solid dispersions (ASDs) represent a promising strategy for enhancing the solubility of poorly soluble drugs. However, the mechanisms underlying the physical stability of ASDs remain insufficiently understood. This study aims to investigate these mechanisms and propose quantitative thresholds to predict the maximum stable drug loading using molecular dynamics simulations. Poly(vinylpyrrolidone) (PVP) and poly (vinylpyrrolidone-co-vinyl acetate) (PVPVA64) are selected as polymeric carriers, while naproxen and acetaminophen serve as model drugs, resulting in the formulation of 18 distinct ASDs across four types for comparison with experimental results. Our findings indicate that the molecular mobility of active pharmaceutical ingredients (APIs) is the primary determinant of solid dispersion stability. High polymer concentrations limit drug molecular mobility through spatial structural constraints and ASD viscosity. As drug loading increases, the polymer concentration reaches a critical threshold (C*), beyond which drug-rich regions form, leading to potential aggregation, rearrangement, and recrystallization of drug molecules into more energetically stable forms. Notably, both the interaction energy and diffusion coefficient show sharp fluctuations at the maximum stable drug loading, which can serve as predictive indicators for ASD stability. Additionally, a search strategy is used to identify potential pre-crystalline sites. By integrating kinetic, thermodynamic, and pre-crystalline analyses through molecular dynamics simulations, this study provides a foundation for more accurate predictions of ASD stability, significantly aiding future formulation development.

Solubilization techniques used for poorly water-soluble drugs

About 40% of approved drugs and nearly 90% of drug candidates are poorly water-soluble drugs. Low solubility reduces the drugability. Effectively improving the solubility and bioavailability of poorly water-soluble drugs is a critical issue that needs to be urgently addressed in drug development and application. This review briefly introduces the conventional solubilization techniques such as solubilizers, hydrotropes, cosolvents, prodrugs, salt modification, micronization, cyclodextrin inclusion, solid dispersions, and details the crystallization strategies, ionic liquids, and polymer-based, lipid-based, and inorganic-based carriers in improving solubility and bioavailability. Some of the most commonly used approved carrier materials for solubilization techniques are presented. Several approved poorly water-soluble drugs using solubilization techniques are summarized. Furthermore, this review summarizes the solubilization mechanism of each solubilization technique, reviews the latest research advances and challenges, and evaluates the potential for clinical translation. This review could guide the selection of a solubilization approach, dosage form, and administration route for poorly water-soluble drugs. Moreover, we discuss several promising solubilization techniques attracting increasing attention worldwide.

Oral Bioavailability Enhancement of Poorly Soluble Drug by Amorphous Solid Dispersion Using Sucrose Acetate Isobutyrate

The focus of the present work was to develop amorphous solid dispersion (ASD) formulation of aprepitant (APT) using sucrose acetate isobutyrate (SAIB) excipient, evaluate for physicochemical attributes, stability, and bioavailability, and compared with hydroxypropyl methylcellulose (HPMC) based formulation. Various formulations of APT were prepared by solvent evaporation method and characterized for physiochemical and in-vivo performance attributes such as dissolution, drug phase, stability, and bioavailability. X-ray powder diffraction indicated crystalline drug conversion into amorphous phase. Dissolution varied as a function of drug:SAIB:excipient proportion. The dissolution was more than 80% in the optimized formulation (F10) and comparable to HPMC based formulation (F13). Stability of F10 and F13 formulations stored at 25 C/60% and 40°C/75% RH for three months were comparable. Both ASD formulations (F10 and F13) were bioequivalent as indicated by the pharmacokinetic parameters Cmax and AUC0-∞. Cmax and AUC0-∞ of F10 and F13 formulations were 2.52 ± 0.39, and 2.74 ± 0.32 μg/ml, and 26.59 ± 0.39, and 24.79 ± 6.02 μg/ml.h, respectively. Furthermore, the bioavailability of ASD formulation was more than twofold of the formulation containing crystalline phase of the drug. In conclusion, stability and oral bioavailability of SAIB based ASD formulation is comparable to HPMC-based formulation of poorly soluble drugs.

Efficient Improvement of Eugenol Water Solubility by Spray Drying Encapsulation in Soluplus® and Lutrol F 127

Herein, we present an elegant and simple method for significant improvement of eugenol water solubility using the polymers Soluplus® and Lutrol F 127 as carriers and spray drying as an encapsulation method. The formulations were optimized by adding myo-inositol-a sweetening agent-and Aerosil® 200 (colloidal, fumed silica)-an anticaking agent. The highest encapsulation efficiency of 97.9-98.2% was found for the samples containing 5% eugenol with respect to the mass of Soluplus®. The encapsulation efficiencies of the spray-dried samples with 15% eugenol are around 90%. Although lowering the yield, the addition of Lutrol F 127 results in a more regular particle shape and enhanced powder flowability. The presence of Aerosil® 200 and myo-inositol also improves the rheological powder properties. The obtained formulations can be used in various dosage forms like powders, granules, capsules, creams, and gels.

Unlocking the Potential of Camel Milk-Derived Exosomes as Novel Delivery Systems: Enhanced Bioavailability of ARV-825 PROTAC for Cancer Therapy

This study investigates the use of camel milk-derived exosomes (CMEs) as carriers for ARV-825, an anticancer agent targeting bromodomain-containing protein 4 (BRD4), in oral chemotherapy. CMEs were isolated and characterized, and ARV-825-loaded CME formulations were prepared and evaluated through various in vitro and in vivo tests. The ARV-825-CME formulation exhibited an entrapment efficiency of 42.75 ± 5.05%, a particle size of 136.8 ± 1.94 nm, and a zeta potential of -32.75 ± 0.70 mV, ensuring stability and sustained drug release. In vitro studies showed a 5.4-fold enhancement in drug release kinetics compared to the free ARV-825 solution. Permeability studies indicated a 3.2-fold increase in apparent permeability, suggesting improved cellular uptake. Cytotoxicity assays demonstrated potent anticancer activity, with IC50 values decreasing by 1.5 to 2-fold in cancer cell lines SF8628 DIPG and H1975R (resistant to Osimertinib). In vivo pharmacokinetic studies in Sprague-Dawley rats revealed superior systemic absorption and bioavailability of ARV-825 from CMEs, with a 2.55-fold increase in plasma concentration and a 5.56-fold increase in AUC. Distribution studies confirmed absorption through the ileum. This research highlights the potential of CMEs as a promising delivery platform for ARV-825, enhancing its therapeutic efficacy and offering a novel approach to cancer treatment.

Preparation, Characterization and Evaluation of Nintedanib Amorphous Solid Dispersions with Enhanced Oral Bioavailability

The dissolution and bioavailability challenges posed by poorly water-soluble drugs continue to drive innovation in pharmaceutical formulation design. Nintedanib (NDNB) is a typical BCS class II drug that has been utilized to treat idiopathic pulmonary fibrosis (IPF). Due to the low solubility, its oral bioavailability is relatively low, limiting its therapeutical effectiveness. It is crucial to enhance the dissolution and the oral bioavailability of NDNB. In this study, we focused on the preparation of amorphous solid dispersions (ASD) using hot melt extrusion (HME). The formulation employed Kollidon® VA64 (VA64) as the polymer matrix, blended with the NDNB at a ratio of 9:1. HME was conducted at temperatures ranging from 80 °C to 220 °C. The successful preparation of ASD was confirmed through various tests including polarized light microscopy (PLM), X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), and thermogravimetric analysis (TGA). The in-vitro cumulative release of NDNB-ASD in 2 h in a pH 6.8 medium was 8.3-fold higher than that of NDNB (p < 0.0001). In a pH 7.4 medium, it was 10 times higher (p < 0.0001). In the in-vivo pharmacokinetic experiments, the area under curve (AUC) of NDNB-ASD was 5.3-fold higher than that of NDNB and 2.2 times higher than that of commercially available soft capsules (Ofev®) (p < 0.0001). There was no recrystallization after 6 months under accelarated storage test. Our study indicated that NDNB-ASD can enhance the absorption of NDNB, thus providing a promising method to improve NDNB bioavailability in oral dosages.

Solid Dispersions Obtained by Ball Milling as Delivery Platform of Etodolac, a Model Poorly Soluble Drug

Poor water solubility of drugs is a limiting factor for their bioavailability and pharmacological activity. Many approaches are known to improve drug solubility, and among them, the physical method, solid dispersions (SDs), is applied. SDs are physical mixtures of a drug and a carrier, sometimes with the addition of a surfactant, which can be obtained by milling, cryomilling, spray-drying, or lyophilization processes. In this study, solid dispersions with etodolac (ETD-SDs) were prepared by the milling method using different carriers, such as hypromellose, polyvinylpyrrolidone, copovidone, urea, and mannitol. Solubility studies, dissolution tests, morphological assessment, thermal analysis, and FTIR imaging were applied to evaluate the SD properties. It was shown that the ball-milling process can be applied to obtain SDs with ETD. All designed ETD-SDs were characterized by higher water solubility and a faster dissolution rate compared to unprocessed ETD. SDs with amorphous carriers (HPMC, PVP, and PVP/VA) provided greater ETD solubility than dispersions with crystalline features (urea and mannitol). FTIR spectra confirmed the compatibility of ETD with tested carriers.

Bioavailability enhancement of coenzyme Q10: An update of novel approaches

Coenzyme Q10 (CoQ10) is an essential, lipid-soluble vitamin involved in electron transport in the oxidoreductive reactions of the mitochondrial respiratory chain. Structurally, the quinone ring is connected to an isoprenoid moiety, which has a high molecular weight. Over the years, coenzyme Q10 has become relevant in the treatment of several diseases, like neurodegenerative disorders, coronary diseases, diabetes, hypercholesterolemia, cancer, and others. According to studies, CoQ10 supplementation might be beneficial in the treatment of CoQ10 deficiencies and disorders associated with oxidative stress. However, the water-insoluble nature of CoQ10 is a major hindrance to successful supplementation. So far, many advancements in CoQ10 bioavailability enhancement have been developed using novel drug carriers such as solid dispersion, liposomes, micelles, nanoparticles, nanoemulsions, self-emulsifying drug systems, or various innovative approaches (CoQ10 complexation with proteins). This article aims to provide an update on methods to improve CoQ10 solubility and bioavailability.

Spectroscopic characterization and pharmacokinetic evaluation of amorphous solid dispersions of glibenclamide for bioavailability enhancement in Wistar rats

Oral bioavailability of glibenclamide (Glb) was appreciably improved by the formation of an amorphous solid dispersion with Poloxamer-188 (P-188). Poloxamer-188 substantially enhanced the solubility and thereby the dissolution rate of the biopharmaceutics classification system (BCS) class II drug Glb and simultaneously exhibited a better stabilizing effect of the amorphous solid dispersion prepared by the solvent evaporation method. The physical state of the dispersed Glb in the polymeric matrix was characterized by differential scanning calorimetry, X-ray diffraction, scanning electron microscope and Fourier transform infrared studies. In vitro drug release in buffer (pH 7.2) revealed that the amorphous solid dispersion at a Glb-P-188 ratio of 1:6 (SDE4) improved the dissolution of Glb by 90% within 3 h. A pharmacokinetic study of the solid dispersion formulation SDE4 in Wistar rats showed that the oral bioavailability of the drug was greatly increased as compared with the market tablet formulation, Daonil®. The formulation SDE4 resulted in an AUC0-24h ~2-fold higher. The SDE4 formulation was found to be stable during the study period of 6 months.

Advances in nanobubbles for cancer theranostics: Delivery, imaging and therapy

Maximizing treatment efficacy and forecasting patient prognosis in cancer necessitates the strategic use of targeted therapy, coupled with the prompt precise detection of malignant tumors. Theutilizationof gaseous systems as an adaptable platform for creating nanobubbles (NBs) has garnered significant attention as theranostics, which involve combining contrast chemicals typically used for imaging with pharmaceuticals to diagnose and treattumorssynergistically in apersonalizedmanner for each patient. This review specifically examines the utilization of oxygen NBsplatforms as a theranostic weapon in the field of oncology. We thoroughly examine the key factors that impact the effectiveness of NBs preparations and the consequences of these treatment methods. This review extensively examines recent advancements in composition schemes, advanced developments in pre-clinical phases, and other groundbreaking inventions in the area of NBs. Moreover, this review offers a thorough examination of the optimistic future possibilities, addressing prospective methods for improvement and incorporation into widely accepted therapeutic practices. As we explore the ever-changing field of cancer theranostics, the incorporation of oxygen NBs appears as a promising development, providing new opportunities for precision medicine and marking a revolutionary age in cancer research and therapy.

Ligand-conjugated multiwalled carbon nanotubes for cancer targeted drug delivery

Multiwalled carbon nanotubes (MWCNTs) are at the forefront of nanotechnology-based advancements in cancer therapy, particularly in the field of targeted drug delivery. The nanotubes are characterized by their concentric graphene layers, which give them outstanding structural strength. They can deliver substantial doses of therapeutic agents, potentially reducing treatment frequency and improving patient compliance. MWCNTs' diminutive size and modifiable surface enable them to have a high drug loading capacity and penetrate biological barriers. As a result of the extensive research on these nanomaterials, they have been studied extensively as synthetic and chemically functionalized molecules, which can be combined with various ligands (such as folic acid, antibodies, peptides, mannose, galactose, polymers) and linkers, and to deliver anticancer drugs, including but not limited to paclitaxel, docetaxel, cisplatin, doxorubicin, tamoxifen, methotrexate, quercetin and others, to cancer cells. This functionalization facilitates selective targeting of cancer cells, as these ligands bind to specific receptors overexpressed in tumor cells. By sparing non-cancerous cells and delivering the therapeutic payload precisely to cancer cells, this therapeutic payload delivery ability reduces chemotherapy systemic toxicity. There is great potential for MWCNTs to be used as targeted delivery systems for drugs. In this review, we discuss techniques for functionalizing and conjugating MWCNTs to drugs using natural and biomacromolecular linkers, which can bind to the cancer cells' receptors/biomolecules. Using MWCNTs to administer cancer drugs is a transformative approach to cancer treatment that combines nanotechnology and pharmacotherapy. It is an exciting and rich field of research to explore and optimize MWCNTs for drug delivery purposes, which could result in significant benefits for cancer patients.

Investigation of Stabilized Amorphous Solid Dispersions to Improve Oral Olaparib Absorption

In this study, we investigated the formulation of stable solid dispersions to enhance the bioavailability of olaparib (OLA), a therapeutic agent for ovarian cancer and breast cancer characterized as a BCS class IV drug with low solubility and low permeability. Various polymers were screened based on solubility tests, and OLA-loaded solid dispersions were prepared using spray drying. The physicochemical properties of these dispersions were investigated via scanning electron microscopy (SEM), differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and Fourier Transform Infrared Spectroscopy (FT-IR). Subsequent dissolution tests, along with assessments of morphological and crystallinity changes in aqueous solutions, led to the selection of a hypromellose (HPMC)-based OLA solid dispersion as the optimal formulation. HPMC was effective at maintaining the supersaturation of OLA in aqueous solutions and exhibited a stable amorphous state without recrystallization. In an in vivo study, this HPMC-based OLA solid dispersion significantly enhanced bioavailability, increasing AUC0-24 by 4.19-fold and Cmax by more than 10.68-fold compared to OLA drug powder (crystalline OLA). Our results highlight the effectiveness of HPMC-based solid dispersions in enhancing the oral bioavailability of OLA and suggest that they could be an effective tool for the development of oral drug formulations.

A comparative study on the preparation and evaluation of solubilizing systems for silymarin

Silymarin (SM) exhibits clinical efficacy in treating liver injuries, cirrhosis, and chronic hepatitis. However, its limited water solubility and low bioavailability hinder its therapeutic potential. The primary objective of this study was to compare the in vitro and in vivo characteristics of the four distinct SM solubilization systems, namely SM solid dispersion (SM-SD), SM phospholipid complex (SM-PC), SM sulfobutyl ether-β-cyclodextrin inclusion complex (SM-SBE-β-CDIC) and SM self-microemulsifying drug delivery system (SM-SMEDDS) to provide further insights into their potential for enhancing the solubility and bioavailability of SM. The formation of SM-SD, SM-PC, and SM-SBE-β-CDIC was thoroughly characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and powder X-ray diffractometry (PXRD) techniques to analyze the changes in their microscopic structure, molecular structure, and crystalline state. The particle size and polydispersity index (PDI) of SM-SMEDDS were 71.6 ± 1.57 nm, and 0.13 ± 0.03, respectively. The self-emulsifying time of SM-SMEDDS was 3.0 ± 0.3 min. SM-SMEDDS exhibited an improved in vitro dissolution rate and demonstrated the highest relative bioavailability compared to pure SM, SM-SD, SM-PC, SM-SBE-β-CDIC, and Legalon®. Consequently, SMEDDS shows promise as a drug delivery system for orally administered SM, offering enhanced solubility and bioavailability.

Designing starch-based fenofibrate formulations using the melting method

Fenofibrate (FNF) is used to treat hyperlipidemia. However, FNF is a poorly water-soluble drug, and the dosage of commercial products is relatively high at 160 mg in a Lipidil® tablet. Therefore, this study aimed to develop an FNF-solid dispersion (SD) that solubilizes and stabilizes FNF. The melting method that uses the low melting point of FNF was employed. The dissolution percentage of FNF in the optimal formulation (SD2) increased by 1.2-, 1.3-, and 1.3-fold at 5 min compared to that of Lipidil® and increased by 2.0-, 2.1-, and 2.0-fold compared to the pure FNF in pH 1.2 media, distilled water, and pH 6.8 buffer, which included 0.025 M sodium lauryl sulfate, respectively. The SD2 formulation showed a dissolution percentage of nearly 100 % in all dissolution media after 60 min. The physicochemical properties of the SD2 formulation exhibited slight changes in the melting point and crystallinity of FNF. Moreover, the stability of the SD2 formulation was maintained for six months. In particular, it was challenging to secure stability when starch#1500 was excluded from the SD2 formulation. In conclusion, the dissolution percentage of FNF in the SD2 formulation was improved owing to the weak binding force between FNF and the excipients, stability was secured, and favorable results are expected in future animal experiments.

Nutraceutical delivery systems to improve the bioaccessibility and bioavailability of lycopene: A review

Lycopene is a promising biological functional component with various biological activities and excellent pharmacological activities. However, its low water solubility and stability lead to low oral bioavailability, which limits its edible and medicinal research. Then, it is necessary to explore effective methods to protect lycopene from destruction and further exploit its potential benefits. The absorption of lycopene in vivo is affected by solubility, stability, isomer type, emulsifying ability, difficulty in forming micelles in vivo, and interaction with food components. Emulsions, pickering emulsions, micelles, liposomes, bigels, beasds, solid dispersions, microcapsules, nanoparticles, electrospinning and other drug delivery systems can be used as good strategies to improve the stability and bioavailability of lycopene. In this paper, the absorption process of lycopene in vivo and the factors affecting its bioavailability were discussed, and the preparation strategies for improving the stability, bioavailability, and health benefits of lycopene were reviewed, to provide some clues and references for the full utilization of lycopene in the field of health. However, there are still various unresolved mysteries regarding the metabolism of lycopene. The safety and in vivo studies of various preparations should be further explored, and the above technologies also face the challenge of industrial production.

Strategies to Improve the Transdermal Delivery of Poorly Water-Soluble Non-Steroidal Anti-Inflammatory Drugs

The transdermal delivery of non-steroidal anti-inflammatory drugs (NSAIDs) has the potential to overcome some of the major disadvantages relating to oral NSAID usage, such as gastrointestinal adverse events and compliance. However, the poor solubility of many of the newer NSAIDs creates challenges in incorporating the drugs into formulations suitable for application to skin and may limit transdermal permeation, particularly if the goal is therapeutic systemic drug concentrations. This review is an overview of the various strategies used to increase the solubility of poorly soluble NSAIDs and enhance their permeation through skin, such as the modification of the vehicle, the modification of or bypassing the barrier function of the skin, and using advanced nano-sized formulations. Furthermore, the simple yet highly versatile microemulsion system has been found to be a cost-effective and highly successful technology to deliver poorly water-soluble NSAIDs.

A novel Posaconazole oral formulation using spray dried solid dispersion technology: in-vitro and in-vivo study

SD (solid dispersion) technology is one of the well-recognized solubility enhancement methods; but the use of versatile carriers in ASD (amorphous SD) to achieve the added advantage of modified release along with solubility improvement is an emerging area of exploration. Spray drying is a widely used technology with excellent scalability and product attributes. The SD carriers explored were Soluplus®, possessing excellent solubilization properties that may enhance bioavailability and is suitable for innovative processing, and Gelucire 43/01, a lipid polymer utilized in a non-effervescent-based floating gastro-retentive DDS for the modified release of API. The CPPs of spray drying were screened during preliminary trials, and the formulation variables were optimized using a 32 Full Factorial Design. All nine batches were evaluated for % yield, % drug content, flow properties, floating behavior, saturation solubility, and in-vitro drug release in 0.1 N HCl. The optimized batch characterized based on DSC (differential scanning calorimetry) and PXRD (powder X-ray diffraction) confirmed the amorphous nature of entrapped drug in SDD (spray-dried dispersion). Particle size analysis and SEM (scanning electron microscopy) demonstrated micron size irregular shaped particles. Residual solvent analysis by GCMS-HS confirmed the elimination of organic solvents from SDD. The optimized batch was found stable after 6 months stability study as per ICH guidelines. In-vivo roentgenography study in New Zealand white rabbit showed the residence of SDD in gastric environment for sufficient time. The pharmacokinetic study was performed in male Sprague-Dawley rats to determine the bioavailability of developed SDD based product in fasting and fed conditions, and to compare the data with marketed Noxafil formulation. The current research is focused on the development of a novel ternary SDD (spray-dried dispersion)-based gastro-retentive formulation for an anti-fungal drug Posaconazole.

Freeze-drying revolution: unleashing the potential of lyophilization in advancing drug delivery systems

Lyophilization also known as freeze-drying is a technique that has been employed to enhance the long-term durability of nanoparticles (NPs) that are utilized for drug delivery applications. This method is used to prevent their instability in suspension. However, this dehydration process can cause stress to the NPs, which can be alleviated by the incorporation of excipients like cryoprotectants and lyoprotectants. Nevertheless, the freeze-drying of NPs is often based on empirical principles without considering the physical-chemical properties of the formulations and the engineering principles of freeze-drying. For this reason, it is crucial to optimize the formulations and the freeze-drying cycle to obtain a good lyophilizate and ensure the preservation of NPs stability. Moreover, proper characterization of the lyophilizate and NPs is of utmost importance in achieving these goals. This review aims to update the recent advancements, including innovative formulations and novel approaches, contributing to the progress in this field, to obtain the maximum stability of formulations. Additionally, we critically analyze the limitations of lyophilization and discuss potential future directions. It addresses the challenges faced by researchers and suggests avenues for further research to overcome these limitations. In conclusion, this review is a valuable contribution to the understanding of the parameters involved in the freeze-drying of NPs. It will definitely aid future studies in obtaining lyophilized NPs with good quality and enhanced drug delivery and therapeutic benefits.

Revolutionizing Cancer Treatment: Biopolymer-Based Aerogels as Smart Platforms for Targeted Drug Delivery

Cancer stands as a leading cause of global mortality, with chemotherapy being a pivotal treatment approach, either alone or in conjunction with other therapies. The primary goal of these therapies is to inhibit the growth of cancer cells specifically, while minimizing harm to healthy dividing cells. Conventional treatments, often causing patient discomfort due to side effects, have led researchers to explore innovative, targeted cancer cell therapies. Thus, biopolymer-based aerogels emerge as innovative platforms, showcasing unique properties that respond intelligently to diverse stimuli. This responsiveness enables precise control over the release of anticancer drugs, enhancing therapeutic outcomes. The significance of these aerogels lies in their ability to offer targeted drug delivery with increased efficacy, biocompatibility, and a high drug payload. In this comprehensive review, the author discuss the role of biopolymer-based aerogels as an emerging functionalized platforms in anticancer drug delivery. The review addresses the unique properties of biopolymer-based aerogels showing their smart behavior in responding to different stimuli including temperature, pH, magnetic and redox potential to control anticancer drug release. Finally, the review discusses the application of different biopolymer-based aerogel in delivering different anticancer drugs and also discusses the potential of these platforms in gene delivery applications.

Application of Biomaterials in the Development of Hydrogel-Forming Microneedles Integrated with a Cyclodextrin Drug Reservoir for Improved Pharmacokinetic Profiles of Telmisartan

Telmisartan (TEL) is a promising antihypertensive agent among other angiotensin receptor blockers. However, its oral application is limited by its poor water solubility. This study presents the successful utilization of biomaterial-based hydrogel-forming microneedles integrated with a direct compressed tablet reservoir (HFMN-DCT) for the transdermal delivery of telmisartan in the treatment of hypertension. The combination of PVP, PVA, and tartaric acid was used in the HFMN formulation. A range of cross-linking temperatures and times were employed to optimize the characteristics of the HFMN. The HFMN exhibited excellent swelling capacity, mechanical strength, and insertion properties. Additionally, the poorly soluble characteristic of TEL was improved by the inclusion complex formulation with β-cyclodextrin (βCD). Phase solubility analysis showed an Ap-type diagram, indicating a higher-order complex between TEL and βCD, with respect to βCD. A ratio of TEL:βCD of 1:4 mM demonstrates the highest solubility enhancement of TEL. The inclusion complex formation was confirmed by FTIR, XRD, DSC, and molecular docking studies. A significantly higher release of TEL (up to 20-fold) from the inclusion complex was observed in the in vitro release study. Subsequently, a DCT reservoir was developed using various concentrations of sodium starch glycolate. Essentially, both the HFMN and DCT reservoir exhibit hemocompatibility and did not induce any skin irritation. The optimized combination of the HFMN-DCT reservoir showed an ex vivo permeation profile of 83.275 ± 2.405%. Notably, the proposed system showed superior pharmacokinetic profiles in the in vivo investigation using male Wistar rats. Overall, this study highlights the potential of HFMN-DCT reservoir systems as a versatile platform for transdermal drug delivery applications.

The Fabrication, Drug Loading, and Release Behavior of Porous Mannitol

Porous materials are widely used as an effective strategy for the solubilization of insoluble drugs. In order to improve the solubility and bioavailability of low water-solubility drugs, it is necessary to prepare porous materials. Mannitol is one of the most popular excipients in food and drug formulations. In this study, porous mannitol was investigated as a drug carrier for low water solubility drugs. Its fabrication, drug loading, and drug release mechanisms were investigated. Porous mannitol was fabricated using the co-spray-antisolvent process and utilizing polyvinylpyrrolidone K30 (PVP K30) as the template agent. Porous mannitol particles were prepared by changing the proportion of the template agent, spraying the particles with mannitol, and eluting with ethanol in order to regulate their pore structure. In subsequent studies, porous mannitol morphology and characteristics were determined systematically. Furthermore, curcumin and ibuprofen, two poorly water-soluble drugs, were loaded into porous mannitol, and their release profiles were analyzed. The results of the study indicated that porous mannitol can be prepared using PVP K30 as a template and that the amount of template agent can be adjusted in order to control the structure of the porous mannitol. When the template agent was added in amounts of 1%, 3%, and 5%, the mannitol pore size increased by 167.80%, 95.16%, and 163.98%, respectively, compared to raw mannitol. Molecular docking revealed that mannitol and drugs are adsorbents and adhere to each other by force interaction. The cumulative dissolution of curcumin and ibuprofen-loaded porous mannitol reached 69% and 70%, respectively. The release mechanism of curcumin and ibuprofen from drug-loaded mannitol was suitable for the Korsmeyer-Peppas kinetic model. In summary, the co-spray-antisolvent method proved effective in fabricating porous materials rapidly, and porous mannitol had a remarkable effect on drug solubilization. The results obtained are conducive to the development of porous materials.

Empowering the Battle: Bioenhancers as Allies Against Cancer Drug Resistance

BACKGROUND

Drug resistance has been a great hindrance in the path of counteracting diseases like cancer and is driven by drugs misuse and overuse. In terms of cancer, resistance has been developed due to cellular changes, altered growth activation pathways, increased expression of efflux proteins, and changes in the local physiology of cancer (blood supply, tissue hydrodynamics, increased mutation rate/epigenetics, tumor cell heterogeneity). One of the approaches to address these challenges is the use of bioenhancers, which can overcome drug resistance, thereby improving bioavailability (BA).

CONCLUSION

Bioenhancers when combined with drugs can elicit pharmacological activity. They are generally combined with therapeutic agents at low doses, which increase the BA or therapeutic activity of active pharmaceutical ingredient (API). This review sheds light on the synthesis and classification of bio-enhancers. It also discusses different applications of bio-enhancers like piperine, ginger, quercetin, curcumin, etc. in the treatment of cancer. The review also presents some of the recent advancements in terms of nanocarriers for delivering API combined with bioenhancers.

Febuxostat solubilization and stabilization approach using solid dispersion method: Synergistic effect of dicalcium phosphate dehydrate and chitosan

Drug solubilization studies are continuously being conducted. Febuxostat (FBX) has a low solubility in water. This study aims to develop a stable FBX-solid dispersion (SD) formulation using a solvent evaporation method. The solubilization strategy of FBX is to develope an optimal FBX-SD formulation by selecting a solubilizer and carrier through the screening method. The final selected solubilizer, macrogol 15 hydroxystearate and polyoxyl 15 hydroxystearate (Kolliphor® HS-15), is widely used in the pharmaceutical industry as a nonionic solubilizing and emulsifying agent and has low toxicity. Especially when commonly used in developing lipophilic drug formulations, it dissolves well in water and ethyl alcohol. The optimal composition ratio of the formulation (SD4) was FBX:HS-15®:granular dicalcium phosphate dehydrate (DCP-D): A synthetic magnesium aluminometasilicate (Neusilin®UFL2):chitosan = 1:3:3:1:1 (w/w) and showed 3.0-, 2.3-, and 1.1-fold higher dissolution (%) of FBX compared to that of the Feburic tab® in pH 1.2 media, distilled water (DW), and pH 6.8 buffer, respectively. Also, in vitro release and in vitro permeability in SD4 formulation showed higher than that of Feburic tab®. Based on its stability over 6 months, it was confirmed that chitosan acted as a stabilizer. Moreover, due to weak intermolecular interactions, FBX in the SD4 formulation was considered to exist in a mixed state of amorphous and crystalline FBX. In conclusion, the improved dissolution (%) and stability of FBX in SD4 formulation were secured through the synergistic effect of excipients.

Solid Dispersion Incorporated into Dissolving Microneedles for Improved Antifungal Activity of Amphotericin B: In Vivo Study in a Fungal Keratitis Model

Fungal keratitis (FK) is a fungal infection of the cornea, which is part of the eye and causes corneal ulcers and an increased risk of permanent blindness, which is often found in Candida albicans species. Amphotericin B (AMB), which is a group of polyenes as the first-line treatment of FK, is effective in annihilating C. albicans. However, AMB preparations such as eye drops and ointments have major drawbacks, for instance, requiring more frequent administrations, loss of the drug by the drainage process, and rapid elimination in the precornea, which result in low bioavailability of the drug. An ocular dissolving microneedle containing the solid dispersion amphotericin B (DMN-SD-AMB) had been developed using a mixture of poly(vinyl alcohol) (PVA) and poly(vinylpyrrolidone) (PVP) polymers, while the solid dispersion AMB (SD-AMB) was contained in the needle as a drug. This study aims to determine the most optimal and safest DMN-SD-AMB formula for the treatment of FK in the eye as well as a solution to overcome the low bioavailability of AMB eye drops and ointment preparations. SD-AMB had been successfully developed, which was characterized by increased antifungal activity and drug release in vitro compared to other treatments. Furthermore, DMN-SD-AMB studies had also been successfully performed with the best formulation, which exhibited the best ex vivo corneal permeation profile and antifungal activity as well as being safe from eye irritation. In addition, an in vivo antifungal activity using a rabbit infection model shows that the number of fungal colonies was 0.98 ± 0.11 log10 CFU/mL (F3), 5.76 ± 0.32 log10 CFU/mL (AMB eye drops), 4.01 ± 0.28 log10 CFU/mL (AMB ointments), and 9.09 ± 0.65 log10 CFU/mL (control), which differed significantly (p < 0.05). All of these results evidence that DMN-SD-AMB is a new approach to developing intraocular preparations for the treatment of FK.

Self-emulsifying micelles as a drug nanocarrier system for itraconazole oral bioavailability enhancement; in vitro and in vivo assessment

Itraconazole (ITZ) is a renowned antifungal medication, however its therapeutic efficacy is limited by low solubility and oral bioavailability. The current research work attempted to augment the oral bioavailability of ITZ by incorporating into self-emulsifying micelles (SEMCs). To fabricate the SEMCs, various preparation techniques including physical mixture, melt-emulsification, solvent evaporation and kneading, were opted by using different weight ratio of drug and solubilizers i.e. Gelucire-50/13 or Gelucire-44/14 and characterized both in vitro and in vivo. The prepared SEMCs were found to be in the size range from 63.4 ± 5.2 to 284.2 ± 19.5 nm with surface charges ranging from -16 ± 1.2 to -27 ± 2.0 mV. The drug solubility was improved to a reasonable extent with all investigated formulations, however, SEMCs in group 6 prepared by kneading method (KMG6) using Gelucire-44/14: drug (10:1 presented 87.6 folds' increase (964.93 ± 2 μg/mL) compared to solubility of crystalline ITZ (11 ± 2 μg/mL) through kneading method. In addition, KMG6 SEMCs shows the fast drug release compared to other SEMCs. Further, KMG6 SEMCs also exhibited 5.12-fold higher relative intestinal serosal fluid absorption compared to crystalline ITZ. The pharmacokinetic parameters such Cmax, AUC and Tmax of KMG6 SEMCs significantly improved compared to crystalline ITZ. In conclusion, the manipulation of ITZ solubility, dissolution rate and absorption using SEMCs is a promising strategy for bioavailability enhancement.

Strategies to improve the stability of amorphous solid dispersions in view of the hot melt extrusion (HME) method

Oral administration of drugs is preferred over other routes for several reasons: it is non-invasive, easy to administer, and easy to store. However, drug formulation for oral administration is often hindered by the drug's poor solubility, which limits its bioavailability and reduces its commercial value. As a solution, amorphous solid dispersion (ASD) was introduced as a drug formulation method that improves drug solubility by changing the molecular structure of the drugs from crystalline to amorphous. The hot melt extrusion (HME) method is emerging in the pharmaceutical industry as an alternative to manufacture ASD. However, despite solving solubility issues, ASD also exposes the drug to a high risk of crystallisation, either during processing or storage. Formulating a successful oral administration drug using ASD requires optimisation of the formulation, polymers, and HME manufacturing processes applied. This review presents some important considerations in ASD formulation, including strategies to improve the stability of the final product using HME to allow more new drugs to be formulated using this method.

ADMET and Solubility Analysis of New 5-Nitroisatine-Based Inhibitors of CDK2 Enzymes

The development of new substances with the ability to interact with a biological target is only the first stage in the process of the creation of new drugs. The 5-nitroisatin derivatives considered in this study are new inhibitors of cyclin-dependent kinase 2 (CDK2) intended for anticancer therapy. The research, carried out based on the ADMET (absorption, distribution, metabolism, excretion, toxicity) methods, allowed a basic assessment of the physicochemical parameters of the tested drugs to be made. The collected data clearly showed the good oral absorption, membrane permeability, and bioavailability of the tested substances. The analysis of the metabolite activity and toxicity of the tested drugs did not show any critical hazards in terms of the toxicity of the tested substances. The substances' low solubility in water meant that extended studies tested compounds were required, which helped to select solvents with a high dissolving capacity of the examined substances, such as DMSO or NMP. The use of aqueous binary mixtures based on these two solvents allowed a relatively high solubility with significantly reduced toxicity and environmental index compared to pure solvents to be maintained, which is important in the context of the search for green solvents for pharmaceutical use.

Modification of the Physicochemical Properties of Active Pharmaceutical Ingredients via Lyophilization

Bioavailability is an important biopharmaceutical characteristic of active pharmaceutical ingredients (APIs) that is often correlated with their solubility in water. One of the methods of increasing solubility is freeze drying (lyophilization). The article provides a systematic review of studies published from 2012 to 2022 aimed at optimizing the properties of active pharmaceutical ingredients by freeze drying. This review was carried out in accordance with the recommendations of Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA). In general, 141 modifications of 36 APIs attributed to 12 pharmacological groups were reported in selected publications. To characterize the products of phase modification after lyophilization, a complex of analytical methods was used, including microscopic, thermal, X-ray, and spectral approaches. Solubility and pharmacokinetic parameters were assessed. There is a tendency to increase solubility due to the amorphization of APIs during lyophilization. Thus, the alcohol lyophilizate of dihydroquercetin is "soluble" in water compared to the initial substance belonging to the category "very poorly soluble". Based on the analysis of the literature, it can be argued that lyophilization is a promising method for optimizing the properties of APIs.

Sugars and Polyols of Natural Origin as Carriers for Solubility and Dissolution Enhancement

Crystalline carriers such as dextrose, sucrose, galactose, mannitol, sorbitol, and isomalt have been reported to increase the solubility, and dissolution rates of poorly soluble drugs when employed as carriers in solid dispersions (SDs). However, synthetic polymers dominate the preparation of drugs: excipient SDs have been created in recent years, but these polymer-based SDs exhibit the major drawback of recrystallisation upon storage. Also, the use of high-molecular-weight polymers with increased chain lengths brings forth problems such as increased viscosity and unnecessary bulkiness in the resulting dosage form. An ideal SD carrier should be hydrophilic, non-hygroscopic, have high hydrogen-bonding propensity, have a high glass transition temperature (Tg), and be safe to use. This review discusses sugars and polyols as suitable carriers for SDs, as they possess several ideal characteristics. Recently, the use of low-molecular-weight excipients has gained much interest in developing SDs. However, there are limited options available for safe, low molecular excipients, which opens the door again for sugars and polyols. The major points of this review focus on the successes and failures of employing sugars and polyols in the preparation of SDs in the past, recent advances, and potential future applications for the solubility enhancement of poorly water-soluble drugs.

Emerging Applications of Hydroxypropyl Methylcellulose Acetate Succinate: Different Aspects in Drug Delivery and Its Commercial Potential

Hydroxypropyl methylcellulose acetate succinate (HPMCAS) has multi-disciplinary applications spanning across the development of drug delivery systems, in 3D printing, and in tissue engineering, etc. HPMCAS helps in maintaining the drug in a super-saturated condition by inhibiting its precipitation, thereby increasing the rate and extent of dissolution in the aqueous media. HPMCAS has several distinctive characteristics, such as being amphiphilic in nature, having an ionization pH, and a succinyl and acetyl substitution ratio, all of which are beneficial while developing formulations. This review provides insights regarding the various types of formulations being developed using HPMCAS, including amorphous solid dispersion (ASD), amorphous nanoparticles, dry coating, and 3D printing, along with their applicability in drug delivery and biomedical fields. Furthermore, HPMCAS, compared with other carbohydrate polymers, shows several benefits in drug delivery, including proficiency in imparting stable ASD with a high dissolution rate, being easily processable, and enhancing bioavailability. The various commercially available formulations, regulatory considerations, and key patents containing the HPMCAS have been discussed in this review.

Review of industrially recognized polymers and manufacturing processes for amorphous solid dispersion based formulations

Evolving therapeutic landscape through combinatorial chemistry and high throughput screening have resulted in an increased number of poorly soluble drugs. Drug delivery strategies quickly adapted to convert these drugs into successful therapies. Amorphous solid dispersion (ASD) technology is widely employed as a drug delivery strategy by pharmaceutical industries to overcome the challenges associated with these poorly soluble drugs. The development of ASD formulation requires an understanding of polymers and manufacturing techniques. A review of US FDA-approved ASD-based products revealed that only a limited number of polymers and manufacturing technologies are employed by pharmaceutical industries. This review provides a comprehensive guide for the selection and overview of polymers and manufacturing technologies adopted by pharmaceutical industries for ASD formulation. The various employed polymers with their underlying mechanisms for solution-state and solid-state stability are discussed. ASD manufacturing techniques, primarily implemented by pharmaceutical industries for commercialization, are presented in Quality by Design (QbD) format. An overview of novel excipients and progress in manufacturing technologies are also discussed. This review provides insights to the researchers on the industrially accepted polymers and manufacturing technology for ASD formulation that has translated these challenging drugs into successful therapies.

Molecular Dynamics Simulations of Selected Amorphous Stilbenoids and Their Amorphous Solid Dispersions with Poly(Vinylpyrrolidone)

Amorphous solid dispersions (ASDs) are one of the promising strategies to improve the solubility and dissolution rate of poorly soluble compounds. In this study, Molecular Dynamics simulations were used to investigate the interactions between three selected stilbenoids with important biological activity (resveratrol, pinostilbene and pterostilbene) and poly(vinylpyrrolidone). The analysis of the pair distribution functions and hydrogen bond distributions reveals a significant weakening of the hydrogen bond network of the stilbenoids in ASDs compared to the pure (no polymer) amorphous systems. This is accompanied by an increase in the mobility of the stilbenoid molecules in the ASDs, both in the translational dynamics determined from the molecular mean square displacements, and in the molecular reorientations followed by analysing several torsional distributions.

Amorphous Solid Dispersion as Drug Delivery Vehicles in Cancer

Cancer treatment has improved over the past decades, but a major challenge lies in drug formulation, specifically for oral administration. Most anticancer drugs have poor water solubility which can affect their bioavailability. This causes suboptimal pharmacokinetic performance, resulting in limited efficacy and safety when administered orally. As a result, it is essential to develop a strategy to modify the solubility of anticancer drugs in oral formulations to improve their efficacy and safety. A promising approach that can be implemented is amorphous solid dispersion (ASD) which can enhance the aqueous solubility and bioavailability of poorly water-soluble drugs. The addition of a polymer can cause stability in the formulations and maintain a high supersaturation in bulk medium. Therefore, this study aimed to summarize and elucidate the mechanisms and impact of an amorphous solid dispersion system on cancer therapy. To gather relevant information, a comprehensive search was conducted using keywords such as "anticancer drug" and "amorphous solid dispersion" in the PubMed, Scopus, and Google Scholar databases. The review provides an overview and discussion of the issues related to the ASD system used to improve the bioavailability of anticancer drugs based on molecular pharmaceutics. A thorough understanding of anticancer drugs in this system at a molecular level is imperative for the rational design of the products.

Developing Nanosuspension Loaded with Azelastine for Potential Nasal Drug Delivery: Determination of Proinflammatory Interleukin IL-4 mRNA Expression and Industrial Scale-Up Strategy

In order to increase bioavailability and intranasal absorbance, the current work set out to create azelastine nasal spray based on nanosuspension. Chondroitin was utilized as a polymer to prepare azelastine nanosuspension through the precipitation procedure. A size of 500 nm and a polydispersity index of 0.276 with a negative potential (-20 mV) were achieved. X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, thermal analysis including differential scanning calorimetry and thermogravimetric analysis, in vitro release, and diffusion studies were used to characterize the optimized nanosuspension. MTT assay was used to assess the viability of the cells, and hemolysis assay was used to assess the blood compatibility. Using RNA extraction and reverse transcription polymerase chain reaction, the levels of the anti-inflammatory cytokine IL-4, which is most closely related to cytokines in allergic rhinitis, were measured in mouse lungs. The drug dissolution and diffusion study indicated 2.0-fold increase compared to pure reference sample. Therefore, the azelastine nanosuspension could be suggested as a practical and simple nanosystem for intranasal delivery with improved permeability and bioavailability. The outcome obtained in this study indicated that azelastine nanosuspension has great potential to treat allergic rhinitis as intranasal treatment.

Advances in lipid-based carriers for cancer therapeutics: Liposomes, exosomes and hybrid exosomes

Cancer has recently surpassed heart disease as the leading cause of deaths worldwide for the age group 45-65 and has been the primary focus for biomedical researchers. Presently, the drugs involved in the first-line cancer therapy are raising concerns due to high toxicity and lack of selectivity to cancer cells. There has been a significant increase in research with innovative nano formulations to entrap the therapeutic payload to enhance efficacy and eliminate or minimize toxic effects. Lipid-based carriers stand out due to their unique structural properties and biocompatible nature. The two main leaders of lipid-based drug carriers: long known liposomes and comparatively new exosomes have been well-researched. The similarity between the two lipid-based carriers is the vesicular structure with the core's capability to carry the payload. While liposomes utilize chemically derived and altered phospholipid components, the exosomes are naturally occurring vesicles with inherent lipids, proteins, and nucleic acids. More recently, researchers have focused on developing hybrid exosomes by fusing liposomes and exosomes. Combining these two types of vesicles may offer some advantages such as high drug loading, targeted cellular uptake, biocompatibility, controlled release, stability in harsh conditions and low immunogenicity.

Recent Advances in Zein-Based Nanocarriers for Precise Cancer Therapy

Cancer has emerged as a leading cause of death worldwide. However, the pursuit of precise cancer therapy and high-efficiency delivery of antitumor drugs remains an enormous obstacle. The major challenge is the lack of a smart drug delivery system with the advantages of biodegradability, biocompatibility, stability, targeting and response release. Zein, a plant-based protein, possesses a unique self-assembly ability to encapsulate anticancer drugs directly or indirectly. Using zein as a nanotherapeutic pharmaceutic preparation can protect anticancer drugs from harsh environments, such as sunlight, stomach acid and pepsin. Moreover, the surface functionalization of zein is easily realized, which can endow it with targeting and stimulus-responsive release capacity. Hence, zein is an ideal nanocarrier for the precise delivery of anticancer drugs. Combined with our previous research experiences, we attempt to review the current state of the preparation of zein-based nanocarriers for anticancer drug delivery. The challenges, solutions and development trends of zein-based nanocarriers for precise cancer therapy are discussed. This review will provide a guideline for precise cancer therapy in the future.

Finding the Right Solvent: A Novel Screening Protocol for Identifying Environmentally Friendly and Cost-Effective Options for Benzenesulfonamide

This study investigated the solubility of benzenesulfonamide (BSA) as a model compound using experimental and computational methods. New experimental solubility data were collected in the solvents DMSO, DMF, 4FM, and their binary mixtures with water. The predictive model was constructed based on the best-performing regression models trained on available experimental data, and their hyperparameters were optimized using a newly developed Python code. To evaluate the models, a novel scoring function was formulated, considering not only the accuracy but also the bias-variance tradeoff through a learning curve analysis. An ensemble approach was adopted by selecting the top-performing regression models for test and validation subsets. The obtained model accurately back-calculated the experimental data and was used to predict the solubility of BSA in 2067 potential solvents. The analysis of the entire solvent space focused on the identification of solvents with high solubility, a low environmental impact, and affordability, leading to a refined list of potential candidates that meet all three requirements. The proposed procedure has general applicability and can significantly improve the quality and speed of experimental solvent screening.

Preformulation study for the selection of a suitable polymer for the development of ellagic acid-based solid dispersion using hot-melt extrusion

Ellagic acid is one of the most studied polyphenolic compounds due to its numerous promising therapeutic properties. However, this therapeutic potential remains difficult to exploit owing to its low solubility and low permeability, resulting in low oral bioavailability. In order to allow an effective therapeutic application of EA, it is therefore necessary to develop strategies that sufficiently enhance its solubility, dissolution rate and bioavailability. For this purpose, solid dispersions based on pre-selected polymers such as Eudragit® EPO, Soluplus® and Kollidon® VA 64, with 5% w/w ellagic acid loading were prepared by hot extrusion and characterized by X-ray diffraction, FTIR spectroscopy and in vitro dissolution tests in order to select the most suitable polymer for future investigations. The results showed that Eudragit® EPO was the most promising polymer for ellagic acid solid dispersions development because its extrudates allowed to obtain a solution supersaturated in ellagic acid that was stable for at least 90 min. Moreover, the resulting apparent solubility was 20 times higher than the actual solubility of ellagic acid. The extrudates also showed a high dissolution rate of ellagic acid (96.25% in 15 min), compared to the corresponding physical mixture (6.52% in 15 min) or the pure drug (1.56% in 15 min). Furthermore, increasing the loading rate of ellagic acid up to 12% in extrudates based on this polymer did not negatively influence its release profile through dissolution tests.

Strategies for oral delivery of bioactive peptides with focus on debittering and masking

Protein hydrolysis is a process used in the food industry to generate bioactive peptides of low molecular weight and with additional health benefits, such as antihypertensive, antidiabetic, and antioxidant properties that are often associated with their content on hydrophobic amino acids. This results in an increased bitterness of the products, making them less desirable for their use in food formulations. This review summarizes the main dietary sources of bitter bioactive peptides, including methods to determine their bitterness, such as the Q-values and electronic tongue; and the main factors and mechanisms underlying the bitterness of these compounds. The main strategies currently used to improve the taste and oral delivery of bioactive peptides are also discussed together with the main advantages and drawbacks of each technique. Debittering and masking techniques are reported in detail, including active carbon treatments, alcohol extraction, isoelectric precipitation, chromatographic methods, and additional hydrolytic processes. Other masking or blocking techniques, including the use of inhibitors, such as modified starch, taurine, glycine, and polyphosphates, as well as chemical modifications, such as amination, deamination, acetylation, or cross-linking were also discussed. The findings of this work highlight encapsulation as a highly effective method for masking the bitter taste and promoting the bioactivity of peptides compared to other traditional debittering and masking processes. In conclusion, the article suggests that advanced encapsulation technologies can serve as an effective means to mitigate the bitterness associated with bioactive peptides, while simultaneously preserving their biological activity, increasing their viability in the development of functional foods and pharmaceuticals.

Advancement in Solubilization Approaches: A Step towards Bioavailability Enhancement of Poorly Soluble Drugs

A drug's aqueous solubility is defined as the ability to dissolve in a particular solvent, and it is currently a major hurdle in bringing new drug molecules to the market. According to some estimates, up to 40% of commercialized products and 70-90% of drug candidates in the development stage are poorly soluble, which results in low bioavailability, diminished therapeutic effects, and dosage escalation. Because of this, solubility must be taken into consideration when developing and fabricating pharmaceutical products. To date, a number of approaches have been investigated to address the problem of poor solubility. This review article attempts to summarize several conventional methods utilized to increase the solubility of poorly soluble drugs. These methods include the principles of physical and chemical approaches such as particle size reduction, solid dispersion, supercritical fluid technology, cryogenic technology, inclusion complex formation techniques, and floating granules. It includes structural modification (i.e., prodrug, salt formation, co-crystallization, use of co-solvents, hydrotrophy, polymorphs, amorphous solid dispersions, and pH variation). Various nanotechnological approaches such as liposomes, nanoparticles, dendrimers, micelles, metal organic frameworks, nanogels, nanoemulsions, nanosuspension, carbon nanotubes, and so forth have also been widely investigated for solubility enhancement. All these approaches have brought forward the enhancement of the bioavailability of orally administered drugs by improving the solubility of poorly water-soluble drugs. However, the solubility issues have not been completely resolved, owing to several challenges associated with current approaches, such as reproducibility in large scale production. Considering that there is no universal approach for solving solubility issues, more research is needed to simplify the existing technologies, which could increase the number of commercially available products employing these techniques.

Hydrogel-forming microarray patches with solid dispersion reservoirs for transdermal long-acting microdepot delivery of a hydrophobic drug

Hydrogel-forming microarray patches (HF-MAPs) are used to circumvent the skin barrier and facilitate the noninvasive transdermal delivery of many hydrophilic substances. However, their use in the delivery of hydrophobic agents is a challenging task. This work demonstrates, for the first time, the successful transdermal long-acting delivery of the hydrophobic atorvastatin (ATR) via HF-MAPs using poly(ethylene)glycol (PEG)-based solid dispersion (SD) reservoirs. PEG-based SDs of ATR were able to completely dissolve within 90 s in vitro. Ex vivo results showed that 2.05 ± 0.23 mg of ATR/0.5 cm² patch was delivered to the receiver compartment of Franz cells after 24 h. The in vivo study, conducted using Sprague Dawley rats, proved the versatility of HF-MAPs in delivering and maintaining therapeutically-relevant concentrations (> 20 ng·mL^-1) of ATR over 14 days, following a single HF-MAP application for 24 h. The long-acting delivery of ATR suggests the successful formation of hydrophobic microdepots within the skin, allowing for the subsequent sustained delivery as they gradually dissolve over time, as shown in this work. When compared to the oral group, the use of the HF-MAP formulation improved the overall pharmacokinetics profile of ATR in plasma, where significantly higher AUC values resulting in ∼10-fold higher systemic exposure levels were obtained. This novel system offers a promising, minimally-invasive, long-acting alternative delivery system for ATR that is capable of enhancing patient compliance and therapeutic outcomes. It also proposes a unique promising platform for the long-acting transdermal delivery of other hydrophobic agents.

Preparation of Apixaban Solid Dispersion for the Enhancement of Apixaban Solubility and Permeability

(1) Background: Solid dispersion (SD) can help increase the bioavailability of poorly water-soluble drugs. Meanwhile, apixaban (APX)—a new anticoagulation drug—has low water solubility (0.028 mg/mL) and low intestinal permeability (0.9 × 10−6 cm/s across Caco-2 colonic cells), thus resulting in a low oral bioavailability of <50%; (2) Methods: To solve the drawbacks of conventional APX products, a novel SD of APX in Soluplus® was prepared, characterized by differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and Fourier transform infrared (FTIR) spectroscopy techniques and evaluated for its solubility, intestinal permeability and pharmacokinetic performance. (3) Results: The crystallinity of the prepared APX SD was confirmed. The saturation solubility and apparent permeability coefficient increased 5.9 and 2.54 times compared to that of raw APX, respectively. After oral administration to the rats, the bioavailability of APX SD was improved by 2.31-fold compared to that of APX suspension (4) Conclusions: The present study introduced a new APX SD that potentially exhibits better solubility and permeability, thus increasing APX’s bioavailability.