Graphene-Oxide-Based Electrochemical Sensors for the Sensitive Detection of Pharmaceutical Drug Naproxen

Cellulose-based potentiometric sensor array for simultaneous determination of non-steroidal anti-inflammatory drugs in human serum and saliva samples

A cellulose based potentiometric sensor array with four selective conductive molecularly imprinted polymers (CMIPs) as sensing elements for the determination of nonsteroidal anti-inflammatory drugs (NSAIDs) (ibuprofen (IBP), diclofenac (DIC), naproxen (NAP), and salicylic acid (SA)) simultaneously in biological fluids was introduced. For that purpose, cellulose papers became chemically conductive first. Subsequently, an electrochemical method fabricated a layer based on polypyrrole as a selective recognition element for each drug on the paper's substrate. Additionally, a cellulose-based adsorbent was fabricated and utilized in electrochemically controlled solid-phase microextraction (EC-SPME) for real sample clean-up before sensor array determination. Also, factors affecting the performance of the cellulose-based EC-SPME device were optimized. In the detection process, anionic Nernstian compliance for drugs was gained at -56.1 to -59.27 mV decade-1. Good linearities were achieved within the range of 0.12-1688 μM with the determination coefficients, R2 ≥ 0.99, and the limits of detection values (LODs) were 0.05 to 0.25 μM. The effectiveness and reliability of a cellulose-based sensor array device for identifying pharmaceuticals in human serum and saliva samples were examined. Accordingly, it was discovered that the cellulose-based sensor array was a revolutionary production device for the effective, versatile, and selective determination of NSAIDs in biological fluids simultaneously.

Sensitive Electrochemical Determination of Vanillin Using a Bimetallic Hydroxide and Reduced Graphene Oxide Nanocomposite

Vanillin (VAN) is an organic compound which not only functions as a flavoring and fragrance enhancer in some foods but also has antioxidant, anti-inflammatory, anti-cancer, and anti-depressant effects. However, the excessive use of VAN can be associated with negative side effects on human health. As a result, it is crucial to find a reliable method for the rapid determination of VAN to enhance food safety. Herein, we developed a sensor using Ni and Co bimetallic hydroxide and reduced graphene oxide nanostructure (NiCo(OH)2.rGO). Our prepared material was characterized using various physico-chemical techniques. The electrocatalytic efficiency of the NiCo(OH)2.rGO-modified glassy carbon electrode was investigated using cyclic and square wave voltammetry. The developed sensor showed a limit of detection of 6.1 nM and a linear range of 5-140 nM. The synergistic effect of NiCo(OH)2 and rGO improved the active sites and enhanced its catalytic efficiency. The practical applicability of the prepared sensor was investigated for the determination of VAN in food samples such as biscuits and chocolates, showing promise in practical applications.

Electrochemically reduced graphene oxide integrated with carboxylated-8-carboxamidoquinoline: A platform for highly sensitive voltammetric detection of Zn(II) ion by screen-printed carbon electrode

Zinc has been demonstrated to boost immune response during SAR-CoV-2 infection, where it prevents coronavirus multiplication. Clinical investigations have testified to its beneficial effects on respiratory health and its deficiency may reduce immune function. A highly sensitive detection of Zn(II) ion via differential pulse voltammetry (DPV) utilizing an environmentally friendly modified screen-printed carbon electrode (SPCE) of electrochemically reduced graphene oxide (ErGO) embedded with carboxylated-8-carboxamidoquinoline (CACQ) as Zn(II) chelating ligand. The green CACQ/ErGO-modified SPCE was characterized by spectroscopy techniques, such as Fourier-transform infrared (FTIR) spectroscopy, Raman spectroscopy, and field-emission scanning electron microscopy with energy dispersive X-ray (FESEM-EDX). The modified electrode-solution interface was studied by electrochemical cyclic voltammetry (CV) and DPV methods. The CACQ-modified wrinkled ErGO electrode conferred a large surface-to-volume ratio with multiple binding sites resulting in greater opportunity for multiple dative covalent binding events with Zn(II) via coordination chemistry, and considerably accelerated the electron transfer rate at the electrode surface. The green Zn(II) sensor demonstrated a quick response time (60 s), broad linear range [1 pM-1 μM Zn(II) ion], a limit of detection (LOD) of 0.53 pM, 35 days of storage period (≥80% of its initial response retained), good reproducibility [relative standard deviation (RSD) = 3.4%], and repeatability (RSD = 4.4%). The developed electrode was applied to determine Zn(II) ion concentration in dietary supplement samples, and the results were in good agreement with those obtained from inductively coupled plasma-mass spectrometry (ICP-MS).

Advances in electrochemical sensors for naproxen detection: Mechanisms, performance factors, and emerging challenges

Naproxen (NAP), a nonsteroidal anti-inflammatory, analgesic, and antipyretic drug, has fewer side effects than similar drugs due to its aryl acetic acid structure. For this reason, it is widely prescribed to manage fever, short-term and long-term pain, and musculoskeletal disorders. However, its use has complications such as changes in kidney function, severe gastrointestinal lesions, and increased bleeding after surgery. In addition, the toxicity of NAP or its metabolites affects the organisms in the ecosystem. Therefore, it is necessary to determine the pharmaceutical quality of produced NAP and measure its amount in living organisms and the environment. Spectroscopy, chromatography, and electrochemical methods have been used to determine NAP. Electrochemical methods have attracted more attention due to their low cost, easy sample preparation, availability, sensitivity, and acceptable results. In addition, using nanomaterials for NAP oxidation results in high surface-to-volume, high available active sites, low cost, and long-term usability with high sensitivity. In this review, electrochemical-based methods for NAP analysis and sensing have been reviewed. Also, the influential factors in NAP identification and evaluation, and their oxidation mechanism have been discussed.

Lab-on-a-chip paper-based electrochemically assisted solid-phase microextraction and ion selective sensor for determination of naproxen in biological fluid samples

BACKGROUND

The integration of paper-based analytical devices with lab-on-a-chip technology has opened up new possibilities for miniaturized, rapid, low cost and portable diagnostic testing in resource limited settings. This work introduces an integrated lab-on-a-chip platform coupling paper-based analytical devices (LOC-PADs) for dual usage: electrochemically controlled solid-phase microextraction (EC-SPME) and determination of naproxen (NAP) by potentiometric ion-selective electrode (ISE) in biological samples.

RESULTS

Conductive papers were successfully fabricated by a chemical procedure. Thereupon, a conducting molecularly imprinted polymer (CMIP) film based on PPy and an anionic model drug (NAP) as a template were applied to the conductive paper substrate via electrochemical methods. A microfluidic chip device was employed to assess the analytical performance of the fabricated paper-based CMIP. The designed chip is divided into two parts with a microfluidic channel between them. The first chamber is an extraction zone for EC-SPME of NAP by using the CMIP paper as a selective sorbent. The second chamber is the detection zone and consists of a paper-based NAP ion selective sensor for potentiometric detection of drug. The analytical process was investigated and optimized for each chamber. Remarkable selectivity towards NAP was achieved in the concentration range from 4.0 × 10-7 to 1.0 × 10-2 mol L-1 with determination coefficient (R2 = 0.99) and the limit of detection (LOD) was 2.0 × 10-7 mol L-1. Anionic Nernstian compliance was gained -58.5 ± 0.5 mV decade-1, and response time in the detection step was 7s for ISE. Satisfactory spiking recovery values within the acceptable range of 90-110 % with RSDs ≤7 % were achieved for the analysis of real samples with fully portable LOC device.

SIGNIFICANCE

The LOC-PADs were favorably used for selective extraction and determination of NAP in serum and saliva samples, respectively. EC-SPME caused sample clean-up, reduced or eliminated different interferences and enhanced selective response of ISE as detection zone of device. Integration of EC-SPME and ISE in a single chip enabled easy and fast determination of trace amounts of NAP in limited real sample volumes, and fully portable advantages.

Sensitive electrochemical detection of methimazole based on a unique copper and exfoliated graphene oxide nanocomposite

Herein, we report the creation of a novel sensitive electrochemical sensing platform based on a copper and exfoliated graphene oxide (Cu-eGO) nanocomposite using a facile synthesis technique, which simultaneously removes the sodium ions that result from the exfoliation process to generate eGO from graphite. This novel Cu-eGO nanocomposite was characterized via SEM, EDX, Raman and XPS. The Cu-eGO/GCE exhibited much greater activity for the electrochemical oxidation of methimazole than the eGO/GCE or bare GCE. The electrochemical properties and kinetics involved in the oxidation of methimazole at the Cu-eGO were examined using voltammetry and electrochemical impedance spectroscopy (EIS). This Cu-eGO based sensing platform demonstrated high sensitivity at 1.32 μAμM-1cm-2, a low limit of detection at 0.06 μM, robust stability, and strong anti-interference against potential interferents that may exist in biological systems for the detection of methimazole. The developed electrochemical sensor was successfully employed in blood serum samples that mimicked real biological environments, showing its high applicability.

Rich-silicon rice husk ash increases iron plaque formation and decreases cadmium and arsenic accumulation in rice seedlings

Combined Cd (cadmium) and As (arsenic) pollution in cultivated land affects the safety of crops production and endangers human health. Rice (Oryza sativa L.) is a crop that uptakes Si (silicon), and Si can effectively promote rice growth and mitigate heavy metal toxicity. This study examined the effect and mechanism of Si-rich amendment (HA) prepared by aerobic combustion of rice husk on Cd and As accumulation in iron plaque and rice seedlings via hydroponic experiments. HA enhanced the vitality of rice growth because of its Si content and increased the amount of amorphous fraction iron plaques, furthermore, Cd content was decreased while the As was increased in both amorphous fraction and crystalline fraction iron plaques, resulting in the contents of Cd and As decreases by 10.0%-38.3% and 9.6%-42.8% for the shoots, and by 13.4%-45.2% and 9.9%-20.0% for the roots, respectively. In addition, X-ray diffraction and X-ray photoelectron spectroscopy illustrated significantly more Fe2O, MnO2 and MnO in the iron plaque after HA supply and the simultaneous existence of Mn-As and Mn-Si compounds. This result revealed less Cd from iron plaque and more As retention with HA supply, reducing the amount of Cd and As up taking and accumulation by rice seedlings. HA is beneficial to rice growth and reduce the absorption of heavy metals in plants. At the same time, HA is environmentally friendly, it can be used for the remediation of paddy fields contaminated by Cd and As.

Real samples sensitive dopamine sensor based on poly 1,3-benzothiazol-2-yl((4-carboxlicphenyl)hydrazono)acetonitrile on a glassy carbon electrode

Herein, a novel electrochemical sensor that was used for the first time for sensitive and selective detection of dopamine (DA) was fabricated. The new sensor is based on the decoration of the glassy carbon electrode surface (GC) with a polymer film of 1,3-Benzothiazol-2-yl((4-carboxlicphenyl)hydrazono)) acetonitrile (poly(BTCA). The prepared (poly(BTCA) was examined by using different techniques such as 1H NMR, 13C NMR, FTIR, and UV-visible spectroscopy. The electrochemical investigations of DA were assessed using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The results obtained showed that the modifier increased the electrocatalytic efficiency with a noticeable increase in the oxidation peak current of DA in 0.1 M phosphate buffer solution (PBS) at an optimum pH of 7.0 and scan rate of 200 mV/s when compared to unmodified GC. The new sensor displays a good performance for detecting DA with a limit of detection (LOD 3σ), and limit of quantification (LOQ 10σ) are 0.28 nM and 94 nM respectively. The peak current of DA is linearly proportional to the concentration in the range from 0.1 to 10.0 µM. Additionally, the fabricated electrode showed sufficient reproducibility, stability, and selectivity for DA detection in the presence of different interferents. The proposed poly(BTCA)/GCE sensor was effectively applied to detect DA in the biological samples.

Role of Graphene in Surface Plasmon Resonance-Based Biosensors

This work explores the transformative role of graphene in enhancing the performance of surface plasmon resonance (SPR)-based biosensors. The motivation for this review stems from the growing interest in the unique properties of graphene, such as high surface area, excellent electrical conductivity, and versatile functionalization capabilities, which offer significant potential to improve the sensitivity, specificity, and stability of SPR biosensors. This review systematically analyzes studies published between 2010 and 2023, covering key metrics of biosensor performance. The findings reveal that the integration of graphene consistently enhances sensitivity. Specificity, although less frequently reported numerically, showed promising results, with high specificity achieved at sub-nanomolar concentrations. Stability enhancements are also significant, attributed to the protective properties of graphene and improved biomolecule adsorption. Future research should focus on mechanistic insights, optimization of integration techniques, practical application testing, scalable fabrication methods, and comprehensive comparative studies. Our findings provide a foundation for future research, aiming to further optimize and harness the unique physical properties of graphene to meet the demands of sensitive, specific, stable, and rapid biosensing in various practical applications.

Metal-Based Nanomaterials for the Sensing of NSAIDS

Cadmium sulfide and zinc oxide nanoparticles were prepared, characterized and used as electrode modifiers for the sensing of two non-steroidal anti-inflammatory drugs (NSAIDs): naproxen and mobic. The structural and morphological characterization of the synthesized nanoparticles was carried out by XRD, UV-Vis spectroscopy, FTIR and scanning electron microscopy. The electrode's enhanced surface area facilitated the signal amplification of the selected NSAIDs. The CdS-modified glassy carbon electrode (GCE) enhanced the electro-oxidation signals of naproxen to four times that of the bare GCE, while the ZnO-modified GCE led to a two-fold enhancement in the electro-oxidation signals of mobic. The oxidation of both NSAIDs occurred in a pH-dependent manner, suggesting the involvement of protons in their electron transfer reactions. The experimental conditions for the sensing of naproxen and mobic were optimized and, under optimized conditions, the modified electrode surface demonstrated the qualities of sensitivity and selectivity, and a fast responsiveness to the target NSAIDs.

ZnO-Enhanced Reduced Graphene Oxide Electrodes from Cocoa Shell: Nanoarchitectonics Platform for Photoelectrocatalytic Detection of Methylene Blue

In this study, we report the successful preparation of reduced graphene oxide modified zinc oxide (rGO-ZnO) composites from cocoa shells. Synthesis of rGO-ZnO was carried out using the Hummer method and thermal reduction. The electrode material was comprehensively characterized using fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy & Energy Dispersive X-ray (SEM-EDX). The photoelectrocatalytic performance of the prepared composite electrodes was evaluated using various electrochemical techniques, including Linear Sweep Voltammetry (LSV), Cyclic Voltammetry (CV), and Multi Pulse Amperometry (MPA). The FTIR analysis of rGO-ZnO exhibited distinct bands corresponding to C-O at 1022 cm-1, C=C at 1600 cm-1, and Zn-O at 455 cm-1. The XRD analysis revealed characteristic peaks at 26.6º, 29.2º, 36.2º, 44.04º, 47.58º, and 64.4º, confirming the presence of key crystalline phases. SEM-EDX analysis of rGO-ZnO revealed a rough surface morphology with bright white and black regions, signifying the coexistence of ZnO and rGO with carbon, oxygen, and zinc contents of 78.98%, 17.46%, and 3.56%, respectively. The investigations involved the photoelectrochemical profiles of methylene blue organic dyes at different concentrations, ranging from 0.5 ppm to 3.0 ppm. The acquired findings offer valuable understanding into the photoelectrocatalytic effectiveness of the composite electrodes containing rGO-ZnO, suggesting their potential use in potential scenarios involving the revitalization of the environment in industrial water systems.

Concentration-Dependent Photocatalytic Upcycling of Poly(ethylene terephthalate) Plastic Waste

Photocatalytic plastic waste upcycling into value-added feedstock is a promising way to mitigate the environmental issues caused by the nondegradable nature of plastic waste. Here, we developed a MoS2/g-C3N4 photocatalyst that can efficiently upcycle poly(ethylene terephthalate) (PET) into valuable organic chemicals. Interestingly, the conversion mechanism is concentration-dependent. For instance, at a low ethylene glycol (EG) concentration (7.96 mM), acetate is the main product. Unexpectedly, the conversion of PET water bottle hydrolysate with only 7.96 mM ethylene glycol (EG) can produce a 4 times higher amount of acetate (704.59 nmol) than the conversion of 300 mM EG (174.50 nmol), while at a higher EG concentration (300 mM), formate is the dominant product. Herein, a 40 times higher EG concentration (300 mM compared to 7.96 mM) would produce only ∼3 times more formate (179 nmol compared to 51.86 nmol). In addition, under natural sunlight conditions, comparable amounts of liquid and gaseous products are produced when commercial PET plastics are employed. Overall, the photocatalytic PET conversion process is quite efficient under a low concentration of EG in PET hydrolysate, indicating the enormous potential of this photocatalysis strategy for real plastics upcycling.

Nanostructured material-based optical and electrochemical detection of amoxicillin antibiotic

The penicillin derivative amoxicillin (AMX) plays an important role in treating various types of infections caused by bacteria. However, excessive use of AMX may have negative health effects. Therefore, it is of utmost importance to detect and quantify the AMX in pharmaceutical drugs, biological fluids, and environmental samples with high sensitivity. Therefore, this review article provides valuable and up-to-date information on nanostructured material-based optical and electrochemical sensors to detect AMX in various biological and chemical samples. The role of using different nanostructured materials on the performance of important optical sensors such as colorimetric sensors, fluorescence sensors, surface-enhanced Raman scattering sensors, chemiluminescence/electroluminescence sensors, optical immunosensors, optical fibre-based sensors, and several important electrochemical sensors based on different electrode types have been discussed. Moreover, nanocomposites, polymer, and MXenes-based electrochemical sensors have also been discussed, in which such materials are being used to further enhance the sensitivity of these sensors. Furthermore, nanocomposite-based photo-electrochemical sensors and the market availability of biosensors including AMX have also been discussed briefly. Finally, the conclusion, challenges, and future perspectives of the above-mentioned sensing techniques for AMX detection are presented.

Electrochemical Chemically Based Sensors and Emerging Enzymatic Biosensors for Antidepressant Drug Detection: A Review

Major depressive disorder is a widespread condition with antidepressants as the main pharmacological treatment. However, some patients experience concerning adverse reactions or have an inadequate response to treatment. Analytical chromatographic techniques, among other techniques, are valuable tools for investigating medication complications, including those associated with antidepressants. Nevertheless, there is a growing need to address the limitations associated with these techniques. In recent years, electrochemical (bio)sensors have garnered significant attention due to their lower cost, portability, and precision. Electrochemical (bio)sensors can be used for various applications related to depression, such as monitoring the levels of antidepressants in biological and in environmental samples. They can provide accurate and rapid results, which could facilitate personalized treatment and improve patient outcomes. This state-of-the-art literature review aims to explore the latest advancements in the electrochemical detection of antidepressants. The review focuses on two types of electrochemical sensors: Chemically modified sensors and enzyme-based biosensors. The referred papers are carefully categorized according to their respective sensor type. The review examines the differences between the two sensing methods, highlights their unique features and limitations, and provides an in-depth analysis of each sensor.

Recent advances in electrochemical determination of anticancer drug 5-fluorouracil

Reliable, rapid, highly selective and sensitive analytical methods for the determination of antineoplastic agent 5-fluorouracil (5-FU) in human body fluids (blood serum/plasma and urine) are required to improve the chemotherapy regimen to reduce its toxicity and improve efficacy. Nowadays, electrochemical techniques provide a powerful analytical tool for 5-FU detection systems. This comprehensive review covers the advances in the development of electrochemical sensors for the quantitative determination of 5-FU, mainly focused on original studies reported from 2015 to date. We have summarized recent trends in the electrochemical sensor systems applied for the analysis of 5-FU in pharmaceutical formulations and biological samples, and critically evaluated the key performance metrics of these sensors (limit of detection, linear range, stability and recovery). Challenges and future outlooks in this field have also been discussed.

Laser-induced graphene-based electrochemical biosensors for environmental applications: a perspective

Biosensors are miniaturized devices that provide the advantage of in situ and point-of-care monitoring of analytes of interest. Electrochemical biosensors use the mechanism of oxidation-reduction reactions and measurement of corresponding electron transfer as changes in current, voltage, or other parameters using different electrochemical techniques. The use of electrochemically active materials is critical for the effective functioning of electrochemical biosensors. Laser-induced graphene (LIG) has garnered increasing interest in biosensor development and improvement due to its high electrical conductivity, specific surface area, and simple and scalable fabrication process. The effort of this perspective is to understand the existing classes of analytes and the mechanisms of their detection using LIG-based biosensors. The manuscript has highlighted the potential use of LIG, its modifications, and its use with various receptors for sensing various environmental pollutants. Although the conventional graphene-based sensors effectively detect trace levels for many analytes in different applications, the chemical and energy-intensive fabrication and time-consuming processes make it imperative to explore a low-cost and scalable option such as LIG for biosensors production. The focus of these potential biosensors has been kept on detection analytes of environmental significance such as heavy metals ions, organic and inorganic compounds, fertilizers, pesticides, pathogens, and antibiotics. The use of LIG directly as an electrode, its modifications with nanomaterials and polymers, and its combination with bioreceptors such as aptamers and polymers has been summarized. The strengths, weaknesses, opportunities, and threats analysis has also been done to understand the viability of incorporating LIG-based electrochemical biosensors for environmental applications.

Electrochemical Exfoliation of Graphite to Graphene-Based Nanomaterials

Here, we report on a new automated electrochemical process for the production of graphene oxide (GO) from graphite though electrochemical exfoliation. The effects of the electrolyte and applied voltage were investigated and optimized. The morphology, structure and composition of the electrochemically exfoliated GO (EGO) were probed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy dispersive X-ray (EDX) spectroscopy, X-ray photoelectron spectroscopy (XPS), FTIR spectroscopy and Raman spectroscopy. Important metrics such as the oxygen content (25.3 at.%), defect density (I_D/I_G = 0.85) and number of layers of the formed EGO were determined. The EGO was also compared with the GO prepared using the traditional chemical method, demonstrating the effectiveness of the automated electrochemical process. The electrochemical properties of the EGO, CGO and other carbon-based materials were further investigated and compared. The automated electrochemical exfoliation of natural graphite powder demonstrated in the present study does not require any binders; it is facile, cost-effective and easy to scale up for a large-scale production of graphene-based nanomaterials for various applications.

Advanced Material Engineering to Tailor Nucleation and Growth towards Uniform Deposition for Anode-Less Lithium Metal Batteries

Anode-less lithium metal batteries (ALMBs), whether employing liquid or solid electrolytes, have significant advantages such as lowered costs and increased energy density over lithium metal batteries (LMBs). Among many issues, dendrite growth and non-uniform plating which results in poor coulombic efficiency are the key issues that viciously decrease the longevity of the ALMBs. As a result, lowering the nucleation barrier and facilitating lithium growth towards uniform plating is even more critical in ALMBs. While extensive reviews have focused to describe strategies to achieve high performance in LMBs and ALMBs, this review focuses on strategies designed to directly facilitate nucleation and growth of dendrite-free ALMBs. The review begins with a discussion of the primary components of ALMBs, followed by a brief theoretical analysis of the nucleation and growth mechanism for ALMBs. The review then emphasizes key examples for each strategy in order to highlight the mechanisms and rationale that facilitate lithium plating. By comparing the structure and mechanisms of key materials, the review discusses their benefits and drawbacks. Finally, major trends and key findings are summarized, as well as an outlook on the scientific and economic gaps in ALMBs.

A scientometric study on application of electrochemical sensors for detection of pesticide using graphene-based electrode modifiers

Pesticide testing is an important topic in environmental protection and food safety. The development of green, accurate and reliable pesticide residue detection methods is an important technical support for implementing of agricultural quality supervision. Electrochemical sensors are a very promising analytical method for pesticide detection due to their high sensitivity, speed, low cost and portability. Performance enhancement of electrochemical sensors is often accompanied by research advances in materials science. Among them, carbon material is a very important electrode material for the fabrication of electrochemical sensors. The discovery of graphene makes it the most promising candidate among carbon materials for sensor performance enhancement. The topic of this review is the use of graphene-modified electrochemical sensors for pesticide detection in the last decade. Traditional literature summaries and bibliometric analyses were used for an in-depth analysis of this topic. In addition to the introduction of different sensor types and performance comparisons, this review also parses the authors' country, keywords and publication frequency. The related research experienced rapid growth several years ago and has now reached a relatively stable stage. We also discuss the perspectives on this topic.

Electrochemical Sensor Based on Ni-Co Layered Double Hydroxide Hollow Nanostructures for Ultrasensitive Detection of Sumatriptan and Naproxen

In this work, Ni-Co layered double hydroxide (Ni-Co LDH) hollow nanostructures were synthesized and characterized by X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), and Fourier-transform infrared spectroscopy (FT-IR) techniques. A screen-printed electrode (SPE) surface was modified with as-fabricated Ni-Co LDHs to achieve a new sensing platform for determination of sumatriptan. The electrochemical behavior of the Ni-Co LDH-modified SPE (Ni-CO LDH/SPE) for sumatriptan determination was investigated using voltammetric methods. Compared with bare SPE, the presence of Ni-Co LDH was effective in the enhancement of electron transport rate between the electrode and analyte, as well as in the significant reduction of the overpotential of sumatriptan oxidation. Differential pulse voltammetry (DPV) was applied to perform a quantitative analysis of sumatriptan. The linearity range was found to be between 0.01 and 435.0 μM. The limits of detection (LOD) and sensitivity were 0.002 ± 0.0001 μM and 0.1017 ± 0.0001 μA/μM, respectively. In addition, the performance of the Ni-CO LDH/SPE for the determination of sumatriptan in the presence of naproxen was studied. Simultaneous analysis of sumatriptan with naproxen showed well-separated peaks leading to a quick and selective analysis of sumatriptan. Furthermore, the practical applicability of the prepared Ni-CO LDH/SPE sensor was examined in pharmaceutical and biological samples with satisfactory recovery results.

Electrochemical DNA sensors for drug determination

In this review, recent achievements in the development of the DNA biosensors developed for the drug determination have been presented with particular emphasis to the main principles of their assembling and signal measurement approaches. The design of the DNA sensors is considered with characterization of auxiliary components and their necessity for the biosensor operation. Carbon nanomaterials, metals and their complexes as well as electropolymerized polymers are briefly described in the assembly of DNA sensors. The performance of the DNA sensors is summarized within 2017-2022 for various drugs and factors influencing the sensitivity and selectivity of the response are discussed. Special attention is paid to the mechanism of the signal generation and possible drawbacks in the analysis of real samples.

Molecularly imprinted copolymer/reduced graphene oxide for the electrochemical detection of herbicide propachlor

The toxicity of propachlor (PROP) with its chloroacetanilide members is reported. Rapid and sensitive detection of PROP is critical for ecotoxicity evaluation and the removal process. A novel voltammetric sensor is developed based on imprinted poly (o-phenylene diamine-co-pyrrole) (o-PD-co-Py) and electrochemically reduced graphene oxide (ERGO) to detect PROP at a trace level. The use of ERGO provides a high density of imprinted cavities for better sensitivity. The imprinted layer of poly (o-PD-co-Py) improves the selectivity of the sensor. The electrode modification was characterized by scanning electron microscopy and electrochemical approaches. The working parameters of the sensor were investigated and optimized. The redox behavior of an external probe of [Fe(CN)6]3−/4− was recorded as the sensor signal for PROP selective binding. The proposed sensor presented wide linear responses to logarithmic PROP concentrations from 0.1 pM to 0.1 µM with a LOD of 0.08 pM. The sensor’s selectivity against some interference was demonstrated. This sensor was applied successfully to detect PROP in spiked water (lake and tap), red tea, and soil samples with good recoveries and reasonable RSD % values.

Graphical abstract

An effective, novel, and cheap carbon paste electrode for naproxen estimation

Herein, a carbon paste electrode (CPE) modified with poly(reduced-o-nitrobenzoic acid [r-o-NBA]) supported in graphene quantum dots (GQDs) was fabricated for the first time. The fabricated electrode’s surface morphology and composition were characterised by scanning electron microscope and transmission electron microscope. The poly(r-o-NBA)/GQDs/CPE showed high electrocatalytic activity towards the oxidation of naproxen (NPX) using cyclic and differential pulse voltammetric methods. The effect of scan rate on the oxidation peak of NPX suggests that the electrode process was typically diffusion-controlled. In addition, the effect of pH reflects the participation of protons in the oxidation process of NPX. The peak current is linearly proportional to the concentration of NPX ranging from 1.0 to 100.0 µM, with the correlation coefficient (R 2), sensitivity, limit of detection (3σ), and limit of quantification (10σ) being 0.9995, 0.419 µA·µM−1·cm−2, 0.672, and 2.241 µM, respectively. Using chronoamperometry, the diffusion coefficient of NPX at the poly(r-o-NBA)/GQDs/CPE was estimated to be 5.36 × 10−6 cm2·s−1. The proposed electrode has good reproducibility, stability, and high selectivity for NPX oxidation. The obtained recovery range (96.7–102.0%) means that the proposed sensor performed satisfactorily when applied for the detection of NPX in its pharmaceutical formulations.

E.P.A.S.S: Electroanalytical Pillbox Assessment Sensor System, A Case Study Using Metformin Hydrochloride

Adulteration of medications is an emerging and significant threat to human health and well-being, even though adulterants are still often not considered seriously in clinical or forensic toxicology. Screening of drug adulterations is a major challenge and concern for regulatory authorities worldwide. Metformin hydrochloride, an important drug to treat diabetes, is found to be adulterated worldwide and a major reason to worry about the health and safety procedure. We have demonstrated a first-of-a-kind electrochemical biomedical device utilizing exfoliated graphene oxide (GO)─Nafion-modified customized gold screen-printed electrodes (spiral electrochemical notification-coupled electrode, SENCE), driven by electrochemical adsorptive stripping voltammetry, to identify the trace level adulteration in metformin. The GO-Nafion-SPE interface has been characterized by powder X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, energy-dispersive X-ray analysis, and Fourier transform infrared. Custom-made screen-printed SENCEs have been functionalized with GO nanoparticles (transducer) to obtain a fingerprint signal response of metformin using differential pulse voltammetry. A linear calibrated dose response has been obtained with n = 3 repetitions with a low limit of detection of 10 ppm for metformin. We have used the sensing response as a function of adulteration, and it is extensively supported by rigorous statistical analysis along with the help of the machine learning tool. This is a first-of-its-kind IoT-enabled electrochemical sensor and analysis platform that can detect drug adulteration as a low, medium, and high output.

Electrochemical Sensing of Vanillin Based on Fluorine-Doped Reduced Graphene Oxide Decorated with Gold Nanoparticles

4-hydroxy-3-methoxybenzaldehyde (vanillin) is a biophenol compound that is relatively abundant in the world’s most popular flavoring ingredient, natural vanilla. As a powerful antioxidant chemical with beneficial antimicrobial properties, vanillin is not only used as a flavoring agent in food, beverages, perfumery, and pharmaceutical products, it may also be employed as a food-preserving agent, and to fight against yeast and molds. The widespread use of vanilla in major industries warrants the need to develop simple and cost-effective strategies for the quantitative determination of its major component, vanillin. Herein, we explore the applications of a selective and sensitive electrochemical sensor (Au electrodeposited on a fluorine-doped reduced-graphene-oxide-modified glassy-carbon electrode (Au/F-rGO/GCE)) for the detection of vanillin. The electrochemical performance and analytical capabilities of this novel electrochemical sensor were investigated using electrochemical techniques including cyclic voltammetry and differential pulse voltammetry. The excellent sensitivity, selectivity, and reproducibility of the proposed electrochemical sensor may be attributed to the high conductivity and surface area of the formed nanocomposite. The high performance of the sensor developed in the present study was further demonstrated with real-sample analysis.

A state-of-the-art review on graphene-based nanomaterials to determine antibiotics by electrochemical techniques

Antibiotics might build up into the human body by foodstuff metabolism, posing a serious threat to human health and safety. Establishing simple and sensitive technology for quick antibiotic evaluation is thus extremely important. Nanomaterials (or NMTs) with the advantage of possessing merits such as remarkable optical, thermal, mechanical, and electrical capabilities have been highlighted as a piece of the best promising materials for rising new paths in the creation of the future generation biosensors. This paper presents the most recent advances in the use of graphene NMTs-based biosensors to determine antibiotics. Gr-NMTs (or graphene nanomaterials) have been used in the development of a biosensor for the electrochemical signal-transducing process. The rising issues and potential chances of this field are contained to give a plan for forthcoming research orientations. As a result, this review provides a comprehensive evaluation of the nanostructured electrochemical sensing approach for antibiotic residues in various systems. In this review, various electrochemical techniques such as CV, DPV, Stripping, EIS, LSV, chronoamperometry, SWV were employed to determine antibiotics. Additionally, this also demonstrates how graphene nanomaterials are employed to detect antibiotics.

A poly-(L-serine)/reduced graphene oxide-Nafion supported on glassy carbon (PLS/rGO-Nafion/GCE) electrode for the detection of naproxen in aqueous solutions

A new electrode was constructed via the anodic electropolymerization of poly-(L-serine) (PLS) on an rGO-Nafion-modified glassy carbon electrode (GCE) for the detection of the emerging organic contaminant naproxen (NPX). The morphology, crystal phase, and surface elements of the electrode were investigated with SEM, TEM, XRD, Raman, ATR-FTIR, zeta potential, C-H-O, and XPS analyses. Results of the surface analysis showed a porous structure resembling graphene sheets inside the Nafion/GCE architecture. Various electrochemical parameters, including scan rate, pH, and NPX concentration, were studied to evaluate the performance of the electrode. The synergistic effect of PLS and rGO-Nafion greatly facilitated the catalytic oxidation of NPX on PLS/rGO-Nafion/GCE. Electrochemical NPX oxidation was a one-electron transfer and adsorption limited process. The optimal working potential was 0.92 V vs. Ag/AgCl. The oxidation current of NPX increased with the increase in the concentration of analyte and scan rate but decreased with pH. The modified electrode exhibited excellent linearity with respect to NPX concentration in the range of 4.3 to 87 μM and limit of detection of 0.23 μM (S/N = 3). The PLS/rGO-Nafion/GCE is a fast, sensitive, reliable, and economical electrode for the detection of NPX in water.

Elucidating the roles of oxygen functional groups and defect density of electrochemically exfoliated GO on the kinetic parameters towards furazolidone detection

Using electrochemically exfoliated graphene oxide (GO)-modified screen-printed carbon electrodes for the detection of furazolidone (FZD), a nitrofuran antibiotic, was explored. In this study, we designed some GO samples possessing different oxygen functional group content/defect density by using ultrasonic irradiation or microwave techniques as supporting tools. The difference in physical characteristics of GO led to the remarkable change in kinetic parameters (electron transfer rate constant (k_s) and transfer coefficient (α)) of electron transfer reactions at K₃/K₄ probes as well as the FZD analyte. Obtained results reveal that the GO-ultrasonic sample showed the highest electrochemical response toward FZD detection owing to the increase in defect density and number of edges in the GO nanosheets under ultrasonic irradiation. The proposed electrochemical nanosensor enabled the monitoring of FZD in the linear range from 1 μM to 100 μM with an electrochemical sensitivity of 1.03 μA μM⁻¹ cm⁻². Tuning suitable electronic structures of GO suggests the potentiality of advanced GO-based electrochemical nanosensor development in food-producing animal safety monitoring applications.

In this study, we have investigated the role of changes in the microstructure of graphene oxide (GO) on the analytical kinetic parameters of GO-based electrochemical sensors for detection of furazolidone (FZD) antibiotic drug.

Sensitive electrochemical detection of metabisulphite in gastrointestinal fluids

Electrochemical detection of metabisulphite in simulated gastrointestinal fluids.

Voltammetric detection of sumatriptan in the presence of naproxen using Fe3O4@ZIF-8 nanoparticles modified screen printed graphite electrode

A novel electrochemical sensing platform was designed and prepared for the simultaneous detection of sumatriptan and naproxen by exploiting the prowess of the Fe₃O₄@ZIF-8 nanoparticles (NPs); as-synthesized Fe₃O₄@ZIF-8 NPs were characterized by energy-dispersive X-ray spectroscopy, fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy (FESEM), transmission electron microscopy and thermal gravimetric analysis. The immobilized Fe₃O₄@ZIF-8 NPs on a screen printed graphite electrode (SPGE) was evaluated electrochemically via cyclic voltammetry, linear sweep voltammetry, and differential pulse voltammetry as well as chronoamprometery means; Fe₃O₄@ZIF-8/SPGE exhibited good sensing performance for sumatriptan in a range of 0.035–475.0 µM with detection limit of 0.012 µM. Also, Fe₃O₄@ZIF-8/SPGE exhibited good sensing performance for naproxen in a range of 0.1–700.0 µM with detection limit of 0.03 µM. The modified electrode showed two separate oxidative peaks at 620 mV for sumatriptan and at 830 mV for naproxen with a peak potential separation of 210 mV which was large enough to detect the two drugs simultaneously besides being stable in the long-run with considerable reproducibility. Real sample analyses were carried out to identify the function of fabricated electrode in sensing applications wherein trace amounts of sumatriptan and naproxen could be identified in these samples.

Highly sensitive and selective detection of naproxen via molecularly imprinted carbon dots as a fluorescent sensor

The overuse and inappropriate discharge of naproxen, a common anti-inflammatory medication and an emerging contaminant in water, is detrimental to human health and bodies of water. Here, we design a fluorescent sensor based on molecularly imprinted carbon dots (CDs) for highly selective detection of trace amounts of naproxen. The CDs were encapsulated into the pores of silica through a sol–gel based method and provide fluorescent signal. After removal of the template molecules, a molecularly imprinted polymer layer was formed and the fluorescence of the CDs sensor was selectively quenched by naproxen. A detection limit of as low as 0.03 μM and a linear range of 0.05–4 μM for detecting naproxen in aqueous solution were obtained. High recoveries of naproxen levels in waste water and urine samples for practical application were also achieved. In addition, the accurate detection performance of sensor was maintained during the UV degradation of naproxen.

A highly selective fluorescent sensor for naproxen utilizes carbon dots as the fluorophore and molecularly imprinted polymer to provide the recognition sites. The fluorescence of carbon dots can be selectively quenched by naproxen.

Simultaneous electrochemical detection of guanine and adenine using reduced graphene oxide decorated with AuPt nanoclusters

A rapid and sensitive electrochemical sensing platform is reported based on bimetallic gold-platinum nanoclusters (AuPtNCs) dispersed on reduced graphene oxide (rGO) for the simultaneous detection of guanine and adenine using square wave voltammetry (SWV). The synthesis of AuPtNCs-rGO nanocomposite was achieved by a simultaneous reduction of graphene oxide (GO) and metal ions (Au³⁺ and Pt⁴⁺) in an aqueous solution. The developed AuPtNCs-rGO electrochemical sensor with the optimized 50:50 bimetallic (Au:Pt) nanoclusters exhibited an outstanding electrocatalytic performance towards the simultaneous oxidation of guanine and adenine without the aid of any enzymes or mediators in physiological pH. The electrochemical sensor platform showed low detection limits of 60 nM and 100 nM (S/N = 3) for guanine and adenine, respectively, with high sensitivity and an extensive linear range from 1.0 μM to 0.2 mM for both guanine and adenine. The interference from the most common electrochemically active interferents, including ascorbic acid, uric acid, and dopamine, was almost negligible. The simultaneous sensing of guanine and adenine in denatured Salmon Sperm DNA sample was successfully achieved using the proposed platform, showing that the AuPtNCs-rGO nanocomposite could provide auspicious clinical diagnosis and biomedical applications.

Graphene Oxide Nanoparticles Modified Paper Electrode as a Biosensing Platform for Detection of the htrA Gene of O. tsutsugamushi

The unique structural and electrochemical properties of graphene oxide (GO) make it an ideal material for the fabrication of biosensing devices. Therefore, in the present study, graphene oxide nanoparticles modified paper electrodes were used as a low-cost matrix for the development of an amperometric DNA sensor. The graphene oxide was synthesized using the modified hummers method and drop cast on a screen-printed paper electrode (SPPE) to enhance its electrochemical properties. Further, the GO/SPPE electrode was modified with a 5′NH2 labeled ssDNA probe specific to the htrA gene of Orientia tsutsugamushi using carbodiimide cross-linking chemistry. The synthesized GO was characterized using UV-Vis, FTIR, and XRD. The layer-by-layer modification of the paper electrode was monitored via FE-SEM, cyclic voltammetry, and electrochemical impedance spectroscopy (EIS). The sensor response after hybridization with single-stranded genomic DNA (ssGDNA) of O. tsutsugamushi was recorded using differential pulse voltammetry (DPV). Methylene blue (1 mM in PBS buffer, pH 7.2) was used as a hybridization indicator and [Fe(CN)₆]^−3/−4 (2.5 mM in PBS buffer, pH 7.2) as a redox probe during electrochemical measurements. The developed DNA sensor shows excellent sensitivity (1228.4 µA/cm²/ng) and LOD (20 pg/µL) for detection of O. tsutsugamushi GDNA using differential pulse voltammetry (DPV).

Impacts of COVID-19 pandemic on the wastewater pathway into surface water: A review

With global number of cases 106 million and death toll surpassing 2.3 million as of mid-February 2021, the COVID-19 pandemic is certainly one of the major threats that humankind have faced in modern history. As the scientific community navigates through the overwhelming avalanche of information on the multiple health impacts caused by the pandemic, new reports start to emerge on significant ancillary effects associated with the treatment of the virus. Besides the evident health impacts, other emerging impacts related to the COVID-19 pandemic, such as water-related impacts, merits in-depth investigation. This includes strategies for the identification of these impacts and technologies to mitigate them, and to prevent further impacts not only in water ecosystems, but also in relation to human health. This paper has critically reviewed currently available knowledge on the most significant potential impacts of the COVID-19 pandemic on the wastewater pathway into surface water, as well as technologies that may serve to counteract the major threats posed, key perspectives and challenges. Additionally, current knowledge gaps and potential directions for further research and development are identified. While the COVID-19 pandemic is an ongoing and rapidly evolving situation, compiling current knowledge of potential links between wastewater and surface water pathways as related to environmental impacts and relevant associated technologies, as presented in this review, is a critical step to guide future research in this area.

An ultrasensitive electrochemical sensor for the detection of acetaminophen via a three-dimensional hierarchical nanoporous gold wire electrode

Acetaminophen is one of the most commonly used non-steroidal anti-inflammatory drugs worldwide. However, due to the increasing popularity of this drug, overdosing and the contamination of ambient waterways have emerged as major issues. Here, we report on a reliable, ultrasensitive, and easy-to-use sensor for the electrochemical detection of acetaminophen. This sensor employs a gold wire electrode with a unique three-dimensional hierachical nanoporous structure, fabricated using a dissolution, disproportion and deposition procedure. In consideration of optimal sensitivity and reproducibility, the most suitable nanoporous gold electrode was employed for the detection of acetamiophen among a set of nanoporous electrodes made under different reaction times. It was found that the pore size, film thickness, and electrochemically active surface area (ECSA) played major roles in the fouling resistance of the developed sensor. The ECSA of the selected sensor was increased by 15.8 times after the post-treatment. The 3D nanoporous electrode demonstrated excellent performance for the detection of acetaminophen with a low detection limit of 3.37 nM, and a strong anti-interference capability. The developed nanoporous Au electrode proved effective for the detection of acetaminophen in real sheep serum, which confirmed its promising application for medical diagnostics and pollutant surveilliance in source waters.

Construction and Application of Graphene Oxide-Bovine Serum Albumin Modified Extended Gate Field Effect Transistor Chiral Sensor

Chirality is an essential natural attribute of organisms. Chiral molecules exhibit differences in biochemical processes, pharmacodynamics, and toxicological properties, and their enantioselective recognition plays an important role in explaining life science processes and guiding drug design. Herein, we developed an ultra-sensitive enantiomer recognition platform based on an extended-gate metal-oxide semiconductor field-effect-transistor (Nafion–GO@BSA–EG-MOSFET) that achieved effective chiral resolution of ultra-sensitive Lysine (Lys) and α-Methylbenzylamine (α-Met) enantiodiscrimination at the femtomole level. Bovine serum albumin (BSA) was immobilized on the surface of graphene oxide (GO) through amide bond coupling to prepare the GO@BSA complex. GO@BSA was drop-cast on deposited Au surfaces with a Nafion solution to afford the extended-gate sensing unit. Effective recognition of chiral enantiomers of mandelic acid (MA), tartaric acid (TA), tryptophan (Trp), Lys and α-Met was realized. Moreover, the introduction of GO reduced non-specific adsorption, and the chiral resolution concentration of α-Met reached the level of picomole in a 5-fold diluted fetal bovine serum (FBS). Finally, the chiral recognition mechanism of the as-fabricated sensor was proposed.

Molecular Mechanisms on the Selectivity Enhancement of Ascorbic Acid, Dopamine, and Uric Acid by Serine Oligomers Decoration on Graphene Oxide: A Molecular Dynamics Study

The selectivity in the simultaneous detection of ascorbic acid (AA), dopamine (DA), and uric acid (UA) has been an open problem in the biosensing field. Many surface modification methods were carried out for glassy carbon electrodes (GCE), including the use of graphene oxide and amino acids as a selective layer. In this work, molecular dynamics (MD) simulations were performed to investigate the role of serine oligomers on the selectivity of the AA, DA, and UA analytes. Our models consisted of a graphene oxide (GO) sheet under a solvent environment. Serine tetramers were added into the simulation box and were adsorbed on the GO surface. Then, the adsorption of each analyte on the mixed surface was monitored from MD trajectories. It was found that the adsorption of AA was preferred by serine oligomers due to the largest number of hydrogen-bond forming functional groups of AA, causing a 10-fold increase of hydrogen bonds by the tetraserine adsorption layer. UA was the least preferred due to its highest aromaticity. Finally, the role of hydrogen bonds on the electron transfer selectivity of biosensors was discussed with some previous studies. AA radicals received electrons from serine through hydrogen bonds that promoted oxidation reaction and caused the negative shifts and separation of the oxidation potential in experiments, as DA and UA were less affected by serine. Agreement of the in vitro and in silico results could lead to other in silico designs of selective layers to detect other types of analyte molecules.

The Application of Nanomaterials for the Electrochemical Detection of Antibiotics: A Review

Antibiotics can accumulate through food metabolism in the human body which may have a significant effect on human safety and health. It is therefore highly beneficial to establish easy and sensitive approaches for rapid assessment of antibiotic amounts. In the development of next-generation biosensors, nanomaterials (NMs) with outstanding thermal, mechanical, optical, and electrical properties have been identified as one of the most hopeful materials for opening new gates. This study discusses the latest developments in the identification of antibiotics by nanomaterial-constructed biosensors. The construction of biosensors for electrochemical signal-transducing mechanisms has been utilized in various types of nanomaterials, including quantum dots (QDs), metal-organic frameworks (MOFs), magnetic nanoparticles (NPs), metal nanomaterials, and carbon nanomaterials. To provide an outline for future study directions, the existing problems and future opportunities in this area are also included. The current review, therefore, summarizes an in-depth assessment of the nanostructured electrochemical sensing method for residues of antibiotics in different systems.

Nanomaterial-based electrochemical sensors and biosensors for the detection of pharmaceutical compounds

The surging growth of the pharmaceutical industry is a result of the rapidly increasing human population, which has inevitably led to new biomedical and environmental issues. Aside from the quality control of pharmaceutical production and drug delivery, there is an urgent need for precise, sensitive, portable, and cost-effective technologies to track patient overdosing and to monitor ambient water sources and wastewater for pharmaceutical pollutants. The development of advanced nanomaterial-based electrochemical sensors and biosensors for the detection of pharmaceutical compounds has garnered immense attention due to their advantages, such as high sensitivity and selectivity, real-time monitoring, and ease of use. This review article surveys state-of-the-art nanomaterials-based electrochemical sensors and biosensors for the detection and quantification of six classes of significant pharmaceutical compounds, including anti-inflammatory, anti-depressant, anti-bacterial, anti-viral, anti-fungal, and anti-cancer drugs. Important factors such as sensor/analyte interactions, design rationale, fabrication, characterization, sensitivity, and selectivity are discussed. Strategies for the development of high-performance electrochemical sensors and biosensors tailored toward specific pharmaceuticals are highlighted to provide readers and scientists with an extensive toolbox for the detection of a wide range of pharmaceuticals. Our aims are two-fold: (i) to inspire readers by further elucidating the properties and functionalities of existing nanomaterials for the detection of pharmaceuticals; and (ii) to provide examples of the potential opportunities that these devices have for the advanced sensing of pharmaceutical compounds toward safeguarding human health and ecosystems on a global scale.

Synthesis and Electrochemical Study of Three-Dimensional Graphene-Based Nanomaterials for Energy Applications

Graphene is an attractive soft material for various applications due to its unique and exclusive properties. The processing and preservation of 2D graphene at large scales is challenging due to its inherent propensity for layer restacking. Three-dimensional graphene-based nanomaterials (3D-GNMs) preserve their structures while improving processability along with providing enhanced characteristics, which exhibit some notable advantages over 2D graphene. This feature article presents recent trends in the fabrication and characterization of 3D-GNMs toward the study of their morphologies, structures, functional groups, and chemical compositions using scanning electron microscopy, X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. Owing to the attractive properties of 3D-GNMs, which include high surface areas, porous structures, improved electrical conductivity, high mechanical strength, and robust structures, they have generated tremendous interest for various applications such as energy storage, sensors, and energy conversion. This article summarizes the most recent advances in electrochemical applications of 3D-GNMs, pertaining to energy storage, where they can serve as supercapacitor electrode materials and energy conversion as oxygen reduction reaction catalysts, along with an outlook.