Hyperporous Sponge Interconnected by Hierarchical Carbon Nanotubes as a High-Performance Potassium-Ion Battery Anode

Constructing 3D Zincophilic Skeleton in Nitrogen-Doped Carbon Hybrid Fibers for Dendrite-Free Zn Anodes

The Zn dendrite growth and side reactions are two major issues for the practical use of Zn metal anodes (ZMAs). Herein, an N-doped carbon-based hybrid fiber with the 3D porous skeleton and the zincophilic Cu nanoparticles (denoted as Cu@HLCF) is developed for stable ZMAs. The zincophilic Cu particles in the skeleton work as the active sites to facilitate uniform Zn nucleation. Meanwhile, the abundant pores in the framework of the hybrid fibers provide a large space to relieve the structural stress and suppress the dendrite growth. Moreover, the good mechanical characteristics of the hybrid fiber ensure its high potential applications for flexible electronics. Theoretical analysis results disclose the strong interaction between Zn and Cu sites, and experimental results demonstrate the low voltage hysteresis, high reversibility, and dendrite-free behavior of the Cu@HLCF host for Zn plating/stripping. Moreover, the solid-state Zn-ion battery (ZIB) assembled with a Cu@HLCF/Zn anode shows the prominent flexibility, impressively reliability, and outstanding cycling capability. Therefore, this work not only provides a novel design for the efficient and stable Zn metal anode but also promotes the development of flexible power sources for flexible electronics.

Low-strain and ultra-long cycle stability large-diameter soft carbon microsphere potassium ion anode

Potassium-ion batteries (PIBs) with high potassium abundance, low redox potential of K/K+ and similar energy storage mechanism to lithium-ion batteries are potential candidates for large-scale energy storage in the future. However, due to the large size of K+ (1.38 Å), PIBs exhibit poor kinetics in existing commercial graphite anode materials system. Additionally, they can degrade the material structure and induce significant volume effects, leading to material fragmentation and pulverization in the process of long cycling. It is not straightforward to achieve compatibility with existing potassium anode systems, which forces us to develop new high-performance, low-strain anode materials with outstanding structural stability. Hence, nitrogen doping low-strain and large diameter soft carbon microspheres (NDCS) anodes were successfully developed to meet the demands of high-performance PIBs. Due to its large diameter and low strain characteristics, the Coulomb efficiency is as high as 98.7 %, and the capacity retention is close to 70 % after 4000 cycles at a current density of 1 A/g. Furthermore, we employed advanced computed tomography (CT) techniques to enhance the comprehension of electrochemically driven reactions from the surface to the bulk. This work provides a promising and viable technical solution for exploring PIBs anode materials with low strain and long cycling capabilities to meet the requirements of various application scenarios.

Biomass-Derived Carbon Materials for Electrochemical Energy Storage

The environmental impact from the waste disposal has been widely concerned around the world. The conversion of wastes to useful resources is important for the sustainable society. As a typical family of wastes, biomass materials basically composed of collagen, protein and lignin are considered as useful resources for recycle and reuse. In recent years, the development of carbon material derived from biomasses, such as plants, crops, animals and their application in electrochemical energy storage have attracted extensive attention. Through the selection of the appropriate biomass, the optimization of the activation method and the control of the pyrolysis temperatures, carbon materials with desired features, such as high-specific surface area, variable porous framework, and controllable heteroatom-doping have been fabricated. Herein, this review summarized the preparation methods, morphologies, heteroatoms doping in the plant/animal-derived carbonaceous materials, and their application as electrode materials for secondary batteries and supercapacitors, and as electrode support for lithium-sulfur batteries. The challenges and prospects for the controllable synthesis and large-scale application of biomass-derived carbonaceous materials have also been outlooked.

Revealing the Charge Storage Mechanism in Porous Carbon to Achieve Efficient K Ion Storage

Constructing a porous structure is considered an appealing strategy to improve the electrochemical properties of carbon anodes for potassium-ion batteries (PIBs). Nevertheless, the correlation between electrochemical K-storage performance and pore structure has not been well elucidated, which hinders the development of high-performance carbon anodes. Herein, various porous carbons are synthesized with porosity structures ranging from micropores to micro/mesopores and mesopores, and systematic investigations are conducted to establish a relationship between pore characteristics and K-storage performance. It is found that micropores fail to afford accessible active sites for K ion storage, whereas mesopores can provide abundant surface adsorption sites, and the enlarged interlayer spacing facilitates the intercalation process, thus resulting in significantly improved K-storage performances. Consequently, PCa electrode with a prominent mesoporous structure achieves the highest reversible capacity of 421.7 mAh g-1 and an excellent rate capability of 191.8 mAh g-1 at 5 C. Furthermore, the assembled potassium-ion hybrid capacitor realizes an impressive energy density of 151.7 Wh kg-1 at a power density of 398 W kg-1. The proposed work not only deepens the understanding of potassium storage in carbon materials with distinctive porosities but also paves a path toward developing high-performance anodes for PIBs with customized energy storage capabilities.

Role of iron oxide in retarding the graphitization of de-oiled asphaltenes for amorphous carbon

The solvent deasphalting (SDA) process is widely recognized as a significant technology in processing inferior oil. However, de-oiled asphaltene (DOA), which accounts for about 30% of feedstocks, is not well utilized in conventional processing methods to date. Considering its complicated structure and high heteroatom and metal contents, DOA is suitable for preparing amorphous carbon. Herein, we obtained amorphous carbon from inferior de-oiled asphaltene through direct carbonization of a mixture of DOA and Fe2O3 and revealed the mechanism of iron oxide in retarding graphitization to increase the disordered structure content. After the addition of Fe2O3, XRD results showed that the content of amorphous carbon increased from 25.57% to 59.48%, and a higher defect degree could also be observed in Raman spectra, thus resulting in better electrochemical performance in Na-ion half-cells. As a coke core, Fe2O3 could accelerate the polycondensation of asphaltene molecules; meanwhile, oxygen species derived from Fe2O3 could capture excess H free radicals in the initial pyrolysis stage, which inhibited the formation of planar polycyclic aromatic molecules and weakened π-π interactions. Moreover, O atoms could embed into the carbon skeleton by reacting with DOA at higher temperatures, which could further twist and break the intact carbon layer. Both of the factors enhanced the proportion of amorphous carbon. This work not only provides a new understanding of controlling the carbonization process, but it also promotes the development of the SDA process.

Robust Micro-Sized and Defect-Rich Carbon-Carbon Composites as Advanced Anodes for Potassium-Ion Batteries

Pitch-derived carbon (PC) anode features the merits of low-cost, rich edge-defect sites, and tunable crystallization degree for potassium ion batteries (PIBs). However, gaining the PC anode with both rich edge-defect sites and robust structure remains challenging. Herein, micro-sized and robust PC/expanded-graphite (EG) composites (EGC) with rich edge-defect sites are massively synthesized via melting impregnation and confined pyrolysis. The PC is in situ encapsulated in micro-sized EG skeleton with robust chemical bonds between PC and EG after thermal treatment, endowing the structural stability as micro-sized carbon-carbon composites. The confinement effect originating from EG skeleton could suppress the crystallization degree of the PC and contribute rich edge-defect sites in EGC composites. Additionally, the EG skeleton inside EGC could form continuous electronic conduction nets and establish low-tortuosity carbonaceous electrodes, facilitating rapid electron/ion migration. While applied in PIBs, the EGC anode delivers a reversible capacity that up to 338.5 mAh g-1 at 0.1 A g-1 , superior rate performance of 127.5 mAh g-1 at 5.0 A g-1 , and long-term stability with 204.8 mAh g-1 retain after 700 cycles at 1.0 A g-1 . This novel strategy highlights an interesting category of heterogeneous carbon-carbon composite materials to keep pace with the demand for the future PIBs industry.

Investigating K+ Storage Behavior of Highly Graphitized Carbon Fibers as Anodes for a Potassium-Ion Battery

Many problems of potassium-ion batteries (PIBs) are hidden under a low mass load of the active material. However, developing research based on areal capacity is challenging for PIBs, due to the lack of an anode capable of delivering a stable capacity of more than 1 mAh cm-2. This work investigates the K+ storage behavior of highly graphitized carbon fibers (HG-CF), which exhibit automatic structural adjustments to mitigate voltage polarization. The created defects and residual K+ in the structure favor the reversible insertion/deinsertion of K+. HG-GF after structural adjustment realizes a capacity of 2 mAh (1.13 cm-2) without K deposition and a stable cyclic stability (>500 h). In situ X-ray diffraction and in situ Raman spectra were used to detect defect formation and structural evolution during cycles. This work demonstrates the feasibility of HG-GF as an anode for PIBs and provides a suitable anode for further research of PIBs based on areal capacity.

Advancements and Prospects of Graphite Anode for Potassium-Ion Batteries

Potassium-ion batteries (KIBs) have recently attracted considerable attention owing to their resource abundance, low cost and environmental friendliness. Graphite as a mature commercial anode material for lithium-ion batteries, has been proved as a promising anode candidate for KIBs by reversible forming potassium-graphite intercalation compounds. However, large volume expansion and sluggish K+ kinetics caused by the incompatibility between large radius of K+ and the small interlayer spacing of graphite, result in the poor cycle stability and rate performances, hindering its practical application. Extensive research efforts have focused on improving the potassium storage performance of graphite anodes. This review provides an overview of recent advances in addressing these challenges and optimizing the electrochemical performance of graphite anodes for KIBs. Various strategies to improve the electrochemical performance of graphite and graphitic carbon anodes, such as microcrystalline regulation, heteroatom doping, morphological adjustment, and coating modification, are discussed, while the critical issues and challenges associated with graphite anodes and the prospects for their advancement in KIBs are highlighted. The review offers valuable guidelines for rational structural design and promotes the commercial development of high-performance graphite anode materials for KIBs.

Sustainable Polyvinyl Chloride-Derived Soft Carbon Anodes for Potassium-Ion Storage: Electrochemical Behaviors and Mechanism

Soft carbon is a promising anode material for potassium-ion batteries due to its favorable properties such as low cost, high conductivity, stable capacity, and low potential platform. Polyvinyl chloride, as a white pollutant, is a soft carbon precursor that can be carbonized at varying temperatures to produce soft carbons with controllable defect and crystal structures. This work investigates the effect of carbonization temperature on the crystalline structures of the obtained soft carbons. In situ Raman spectroscopy was used to elucidate the adsorption-intercalation charge storage mechanism of potassium ions in soft carbons. Soft carbons prepared at the temperature of 800 °C have a defect-rich, short-range ordered structure, which provides optimal intercalation and adsorption sites for potassium ions, resulting in a satisfactory capacity of 302 mAh g-1 . This work presents new possibilities for designing soft carbon materials from recycling plastics for potassium-ion batteries.

Pseudocapacitive Potassium-Ion Intercalation Enabled by Topologically Defective Soft Carbon toward High-Rate, Large-Areal-Capacity, and Low-Temperature Potassium-Ion Batteries

Carbonaceous materials are widely investigated as anodes for potassium-ion batteries (PIBs). However, the inferior rate capability, low areal capacity, and limited working temperature caused by sluggish K-ions diffusion kinetics are still primary challenges for carbon-based anodes. Herein, a simple temperature-programmed co-pyrolysis strategy is proposed for the efficient synthesis of topologically defective soft carbon (TDSC) based on inexpensive pitch and melamine. The skeletons of TDSC are optimized with shortened graphite-like microcrystals, enlarged interlayer spacing, and abundant topological defects (e.g., pentagons, heptagons, and octagons), which endow TDSC with fast pseudocapacitive K-ion intercalation behavior. Meanwhile, micrometer-sized structure can reduce the electrolyte degradation over particle surface and avoid unnecessary voids, ensuring a high initial Coulombic efficiency as well as high energy density. These synergistic structural advantages contribute to excellent rate capability (116 mA h g-1 at 20 C), impressive areal capacity (1.83 mA h cm-2 with a mass loading of 8.32 mg cm-2 ), long-term cycling stability (capacity retention of 91.8% after 1200 h cycling), and low working temperature (-10 °C) of TDSC anodes, demonstrating great potential for the practical application of PIBs.

Short-Range Graphitic Nanodomains in Hypocrystalline Carbon Nanotubes Realize Fast Potassium Ion Migration and Multidirection Stress Release

Defect-rich carbon materials are considered as one of the most promising anodes for potassium-ion batteries due to their enormous adsorption sites of K+ , while the realization of both rate capability and cycling stability is still greatly limited by unstable electrochemical kinetics and inevitable structure degradation. Herein, an Fe3+ -induced hydrothermal-pyrolysis strategy is reported to construct well-tailored hybrid carbon nanotubes network architecture (PP-CNT), in which the short-range graphitic nanodomains are in-situ localized in the pea pod shape hypocrystalline carbon. The N,O codoped hypocrystalline carbon region contributes to abundant defect sites for potassium ion storage, ensuring high reversible capacity. Meanwhile, the short-range graphitic nanodomains with expanded interlayer spacing facilitate stable K+ migration and fast electron transfer. Furthermore, the finite element analysis confirms the volume expansion caused by K+ intercalation can be availably buffered due to the multidirection stress release effect of the unique porous pea pod shape, endowing carbon nanotubes with superior structural integrity. Consequently, the PP-CNT anode exhibits superior potassium-storage performance, including high reversible capacity, exceptional rate capability, and ultralong cycling stability. This work opens a new avenue for the fabrication of advanced carbon materials for achieving durable and fast potassium storage.

Two dimensional MnPSe3 layer stacking composites with superior storage performance for alkali metal-ion batteries

Two-dimensional MnPSe₃ Van der Waals stacked in an ABC sequence has abundant and low-cost Mn resources, but has yet to exhibit expected performance as an electrode material in battery devices. Here, we report a 2D/2D composite consisting of few layer MnPSe₃ nanosheets and graphite through a high energy ball milling method for uses on the anodes alkali metal-ion batteries, including lithium ion battery (LIB) and potassium ion battery (PIB). These unique 2D/2D layer nanostructures, with MnPSe₃ layers hierarchically stacked in graphite, can successfully overcome the severe aggregation due to restacking during charge/discharge cycles. Moreover, density functional theory (DFT) calculations show that the band gap of the MnPSe₃/graphite hybrid is as low as 0.07 eV, confirming that the combination of MnPSe₃ and graphite efficiently reduces the ion migration energy barrier. As a result, MnPSe₃/graphite stacking composites achieve a discharge capacity of 488.1 mA h g^-1 after 500 cycles at 2000 mA g^-1 in LIB, and 236.7 mA h g^-1 after 700 cycles at 250 mA g^-1 in PIB. Moreover, the analysis of electrochemical, kinetics, reactions mechanism, DFT, and full cell applications were investigated deeply. This work strongly supports the possibility of MnPSe₃/graphite hybrid as a promising candidate for alkali ion batteries, and makes important improvements for the application of two-dimensional MPCh₃ layer materials in storage systems.

Regulating the Wettability of Hard Carbon through Open Mesochannels for Enhanced K+ Storage

Hard carbons are deemed as promising anode materials for high-performance potassium-ion battery, but their commercialization is still hindered by the insufficient K⁺ transfer kinetics and poor potassiophilicity. Herein, these issues are addressed by improving the wettability of hard carbon, which can be achieved by the introduction of open mesochannels. A series of such hollow mesoporous carbon capsules with different dimensions are synthesized, which exhibit markedly enhanced wettability with electrolyte compared to the microporous counterparts. Various characterizations confirm its effects on promoting the kinetics and potassiophilicity of as-synthesized carbons, which can be additionally improved by S-doping. As a result, the 2D mesoporous carbon anode exhibits excellent rate capability (122.2 mAh g^-1 at 4 A g^-1 ), high reversible capacity (396.6 mAh g^-1 at 0.1 A g^-1 after 200 cycles), and outstanding cycling stability (197.0 mAh g^-1 at 2 A g^-1 after 1400 cycles). In addition, the hollow mesoporous architecture can effectively buffer the volume expansion and thus stabilize the carbon anodes, as visualized by in situ transmission electron microscopy. This work provides new insight for enhanced K⁺ storage performance from the perspective of anode wettability with electrolyte, as well as a universal anode design that combines mesochannels architecture with heteroatom doping.

Bio-inspired non-conjugated poly(carbonylpyridinium) as anode material for high-performance alkali-ion (Li+, Na+, and K+) batteries

The integration of multiple electron-accepting skeletons into polymeric structures is the forefront of materials research for high-energy sustainable energy storage. Herein, we report the synthesis of two novel non-conjugated polymers (NCP1 and NCP2) and a model small molecule (M1) incorporated with bio-derived 4-elecron-uptaking carbonylpyridinium redox-units for alkali-ion batteries. Compared to model small molecules, the polymers exhibited improved battery performance when applied as anode materials for Li-, Na-, and K-ion batteries (LIBs/SIBs/KIBs) owing to their high electrochemical activity and effective ability to suppress dissolution. By judicious selection of the benzothiadiazole redox-active linker, the performance of NCP2 was further enhanced, delivering the highest capacity and the best cycling stability; at mass loadings of up to 3.5 and 4.7 mg cm^-2, the specific capacity remained at 215 and 150 mAh g^-1 after 200 cycles, respectively. The Li⁺/Na⁺/K⁺ insertion/extraction mechanisms of NCP2 were elucidated based on experimental analyses. The insertion/extraction of Li⁺ was much faster than that of Na⁺ and K⁺. This study broadens the family of bio-derived carbonylpyridinium-based polymer materials for next-generation electrochemical energy storage applications.

Energy Storage Mechanism of C12-3-3 with High-Capacity and High-Rate Performance for Li/Mg Batteries

The low specific capacity and Mg non-affinity of graphite limit the energy density of ion rechargeable batteries. Here, we first identify that the monolayer C12-3-3 in sp2-sp3 carbon hybridization with high Li/Mg affinity is an appropriate anode material for Li-ion batteries and Mg-ion batteries via the first-principles simulations. The monolayer C12-3-3 can achieve high specific capacities of 1181 mAh/g for Li and 739 mAh/g for Mg, higher than those of most previous anodes. The Li storage reaction is an "adsorption-conversion-intercalation mechanism", while the Mg storage reaction is an "adsorption mechanism". The 2D carbon material of C12-3-3 displays fast diffusion kinetics with low diffusion barriers of 0.41 eV for Li and 0.21 eV for Mg. As a new carbon-based anode material, the monolayer C12-3-3 will promote the practical application of batteries with high-capacity and high-rate performance.

Defect Engineering of Disordered Carbon Anodes with Ultra-High Heteroatom Doping Through a Supermolecule-Mediated Strategy for Potassium-Ion Hybrid Capacitors

Amorphous carbons are promising anodes for high-rate potassium-ion batteries. Most low-temperature annealed amorphous carbons display unsatisfactory capacities. Heteroatom-induced defect engineering of amorphous carbons could enhance their reversible capacities. Nevertheless, most lignocellulose biomasses lack heteroatoms, making it a challenge to design highly heteroatom-doped carbons (> 10 at%). Herein, we report a new preparation strategy for amorphous carbon anodes. Nitrogen/sulfur co-doped lignin-derived porous carbons (NSLPC) with ultra-high nitrogen doping levels (21.6 at% of N and 0.8 at% of S) from renewable lignin biomacromolecule precursors were prepared through a supramolecule-mediated pyrolysis strategy. This supermolecule/lignin composite decomposes forming a covalently bonded graphitic carbon/amorphous carbon intermediate product, which induces the formation of high heteroatom doping in the obtained NSLPC. This unique pyrolysis chemistry and high heteroatom doping of NSLPC enable abundant defective active sites for the adsorption of K+ and improved kinetics. The NSLPC anode delivered a high reversible capacity of 419 mAh g‒1 and superior cycling stability (capacity retention of 96.6% at 1 A g‒1 for 1000 cycles). Potassium-ion hybrid capacitors assembled by NSLPC anode exhibited excellent cycling stability (91% capacity retention for 2000 cycles) and a high energy density of 71 Wh kg-1 at a power density of 92 W kg-1.

Understanding the Predominant Potassium-Ion Intercalation Mechanism of Single-Phased Bimetal Oxides by in Situ Magnetometry

The electrochemical performance of electrode materials is largely dependent on the structural and chemical evolutions during the charge-discharge processes. Hence, revealing ion storage chemistry could enlighten mechanistic understanding and offer guidance for rational design for energy storage materials. Here, we investigate the mechanisms of potassium (K)-ion storage in the promising bimetal oxide materials by in situ magnetometry. We focus on a single-phased hollow FeTiO₃ (SPH-FTO) hexagonal prism synthesized through a complexing-reagent assisted approach and find that the K-ion storage in this compound occurs predominantly with an intercalation mechanism and fractionally a conversion mechanism. We also demonstrate a K-ion hybrid capacitor assembled with the prepared SPH-FTO hexagonal prism anode and activated carbon cathode, delivering a high energy density and high power density as well as extraordinary cycling stability. This new understanding is used to showcase the inherently high K-ion storage properties from the earth-abundant FeTiO₃.

Processable Potassium-Carbon Nanotube Film with a Three-Dimensional Structure for Ultrastable Metallic Potassium Anodes

K metal holds great promise as the ultimate anode candidate for K-ion batteries because of its high theoretical capacity and low operating potential. However, due to its high viscosity and poor mechanical processability, it remains challenging to manufacture potassium anodes with precise parameters by a simple and executable method. In this work, a high-performance potassium-carbon nanotubes (K@CNTs) composite film electrode with a three-dimensional (3D) skeleton and superior processability is prepared by simply incorporating CNTs into molten potassium. The in situ potassiation reaction between CNTs and molten K formed potassium carbide (KC₈) so as to obtain a solid-liquid mixture, which can reduce the surface tension of molten potassium and promote the preparation of the K@CNTs film electrode. The composite electrode can be molded into a variety of shapes and thicknesses in accurate dimensions. The porous, well-conducting CNTs act as a 3D skeleton uniformly distributed in the K metal, providing adequate surface and space to accommodate and attract K metal, thereby inhibiting the growth of the potassium dendrites and the volume expansion upon cycling. As a result, the K@CNTs composite anode exhibits excellent cyclability and rate capability in both symmetric and full cells. The superior processability and excellent electrochemical performance make this composite an ideal anode candidate for commercial applications in potassium metal batteries.

A Fast-Charging and High-Temperature All-Organic Rechargeable Potassium Battery

Developing fast-charging, high-temperature, and sustainable batteries is critical for the large-scale deployment of energy storage devices in electric vehicles, grid-scale electrical energy storage, and high temperature regions. Here, a transition metal-free all-organic rechargeable potassium battery (RPB) based on abundant and sustainable organic electrode materials (OEMs) and potassium resources for fast-charging and high-temperature applications is demonstrated. N-doped graphene and a 2.8 m potassium hexafluorophosphate (KPF₆ ) in diethylene glycol dimethyl ether (DEGDME) electrolyte are employed to mitigate the dissolution of OEMs, enhance the electrode conductivity, accommodate large volume change, and form stable solid electrolyte interphase in the all-organic RPB. At room temperature, the RPB delivers a high specific capacity of 188.1 mAh g^-1 at 50 mA g^-1 and superior cycle life of 6000 and 50000 cycles at 1 and 5 A g^-1 , respectively, demonstrating an ultra-stable and fast-charging all-organic battery. The impressive performance at room temperature is extended to high temperatures, where the high-mass-loading (6.5 mg cm^-2 ) all-organic RPB exhibits high-rate capability up to 2 A g^-1 and a long lifetime of 500 cycles at 70-100 °C, demonstrating a superb fast-charging and high-temperature battery. The cell configuration demonstrated in this work shows great promise for practical applications of sustainable batteries at extreme conditions.

Superelastic 3D Assembled Clay/Graphene Aerogels for Continuous Solar Desalination and Oil/Organic Solvent Absorption

Superelastic, arbitrary-shaped, and 3D assembled clay/graphene aerogels (CGAs) are fabricated using commercial foam as sacrificial skeleton. The CGAs possess superelasticity under compressive strain of 95% and compressive stress of 0.09-0.23 MPa. The use of clay as skeletal support significantly reduces the use of graphene by 50%. The hydrophobic CGAs show high solvent absorption capacity of 186-519 times its own weight. Moreover, both the compression and combustion methods can be adopted for reusing the CGAs. In particular, it is demonstrated a design of 3D assembled hydrophilic CGA equipped with salt collection system for continuous solar desalination. Due to energy recovery and brine transport management promoted by this design, the 3D assembled CGA system exhibits an extremely high evaporation rate of 4.11 kg m^-2  h^-1 and excellent salt-resistant property without salt precipitation even in 20 wt% brine for continuous 36 h illumination (1 kW m^-2 ), which is the best reported result from the solar desalination devices. More importantly, salts can be collected conveniently by squeezing and drying the solution out of the salt collection system. The work provides new insights into the design of 3D assembled CGAs and advances their applications in continuous solar desalination and efficient oil/organic solvent adsorption.

Jujube Shell Based-Porous Carbon Composites Double-Doped by MnO2 and Ti3C2Tx: The Effect of Double Pseudocapacitive Doping on Electrochemical Properties

In this study, manganese-containing porous carbon was synthesized from jujube shells by two-step carbonization and activation and was then covered with Ti₃C₂Tx to obtain double-doped biomass composites. In order to improve the interfacial properties (surface tension and wettability) between Ti₃C₂Tx and porous carbon, the effects of two media (deionized water and acetone solution) on the electrochemical properties of the composites were compared. The acetone solution changed the surface rheology of Ti₃C₂Tx and porous carbon, and the decreased surface tension and the increased wettability contributed to the ordered growth of 2D-Ti₃C₂Tx on the surface of the porous carbon. Raman analysis shows the relatively higher graphitization degree of JSPC&Ti₃C₂Tx (acetone). Compared with JSPC&Ti₃C₂Tx, JSPC&Ti₃C₂Tx (acetone) can maintain better rectangle-like properties even at a higher scanning rate. Under the effect of the acetone solution, the pseudocapacitive ratio of JSPC&Ti₃C₂Tx (acetone) increased from 10.1% to 30.7%. At the current density of 0.5 A/g, the specific capacitance of JSPC&Ti₃C₂Tx (acetone) achieved 96.83 F/g, and the specific capacitance of 58.17 F/g was maintained even at the high current density (10 A/g), which shows excellent magnification. Under the condition of the current density of 10 A/g, JSPC&Ti₃C₂Tx (acetone) can obtain a power density of 52,000 W/kg while maintaining an energy density of 8.74 Wh/kg. After 2000 cycles, the symmetrical button battery assembled with this material can still have a capacitance retention rate of more than 90%. This method realized the deep utilization of green and low-cost raw materials by using biomass as the precursor of composite materials and promoted the further development of carbon-based supercapacitor electrode materials.

Non-negligible Influence of Oxygen in Hard Carbon as an Anode Material for Potassium-Ion Batteries

The development of potassium-ion batteries (PIBs) has been impeded by the lack of an appropriate carbon anode material that could accommodate K⁺ with a large ionic radius. Hard carbon with low cost and larger interlayer spacing is a promising anode material for PIBs. However, the impact of oxygen-containing functional groups in hard carbon (HC) is less reported. Herein, a hypercrosslinked polymer (HCLP) is prepared and used for the synthesis of microporous hard carbons with superior structural stability and abundant oxygen-containing functional groups and defects, in which the crosslinking agent provided copious oxygen atoms. It is found that a large number of C═O groups and micropores provide more storage sites for K⁺. The surface-controlled process is dominated by the reversible reaction of C═O + K⁺ + e^- ↔ C-O-K, which directly increases the capacity contribution. The HCs obtained at 600 °C exhibit good cycling and rate performance with an initial specific capacity of about 254.3 mAh g^-1 and the capacity retention of 83.2% after 200 cycles at 50 mA g^-1. The capacity reached up to 121 mAh g^-1 at 2 A g^-1. A possible capacitive-adsorption mechanism is proposed by kinetic analysis. The redox reaction mechanism between C═O and K⁺ at the HC is clearly also revealed.

Tailoring Nitrogen Species in Disk-Like Carbon Anode Towards Superior Potassium Ion Storage

Carbon materials, as promising anode candidates for K⁺ storage due to their low cost, abundant sources, and high physicochemical stability, however, encounter limited specific capacity and unfavorable cycling stability that seriously hinder their practical applications. Herein, a feasible strategy to tailor and stabilize the nitrogen species in unique P/N co-doped disk-like carbon through the Sn incorporation (P/N_Sn -CD) is presented, which can largely enhance the specific capacity and cycling capability for K⁺ storage. Specifically, it delivers a high specific capacity of 439.3 mAh g^-1 at 0.1 A g^-1 and ultra-stable cycling capability with a capacity retention of 93.5% at 5000 mA g^-1 over 5000 cycles for K⁺ storage. The underlying mechanism for the superior K⁺ storage performance is investigated by systematical experimental data combined with theoretical simulation results, which can be derived from the increased edge-nitrogen species, improved content and stability of P/N heteroatoms, and enhanced ionic/electronic kinetics. After coupling P/N_Sn -CD anode with activated carbon cathode, the KIHCs can deliver a high energy density of 171.7 Wh kg^-1 at 106.8 W kg^-1 , a superior power density (14027.0 W kg^-1 with 31.2 Wh kg^-1 retained), and ultra-stable lifespan (89.7% retention after 30 K cycles with cycled at 2 A g^-1 ).

Nano-Structured Carbon: Its Synthesis from Renewable Agricultural Sources and Important Applications

Carbon materials are versatile in nature due to their unique and modifiable surface and ease of production. Nanostructured carbon materials are gaining importance due to their high surface area for application in the energy, biotechnology, biomedical, and environmental fields. According to their structures, carbon allotropes are classified as carbon nanodots, carbon nanoparticles, graphene, oxide, carbon nanotubes, and fullerenes. They are synthesized via several methods, including pyrolysis, microwave method, hydrothermal synthesis, and chemical vapor deposition, and the use of renewable and cheaper agricultural feedstocks and reactants is increasing for reducing cost and simplifying production. This review explores the nanostructured carbon detailed investigation of sources and their relevant reports. Many of the renewable sources are covered as focused here, such as sugar cane waste, pineapple, its solid biomass, rise husk, date palm, nicotine tabacum stems, lapsi seed stone, rubber-seed shell, coconut shell, and orange peels. The main focus of this work is on the various methods used to synthesize these carbon materials from agricultural waste materials, and their important applications for energy storage devices, optoelectronics, biosensors, and polymer coatings.

Ultralight Heat-Insulating, Electrically Conductive Carbon Fibrous Sponges for Wearable Mechanosensing Devices with Advanced Warming Function

Ultralight highly porous sponges are attractive for electronic devices due to superelasticity, outstanding resilience, and thermal insulation. However, fabricating an ultralight conductive sponge with low thermal conductivity, mechanical flexibility, and piezoresistivity, as well as adjustable heating behavior, is still a challenge. Here, an ultralight carbon nanofibrous sponge fabricated by pyrolyzing a graphene oxide coated polyimide sponge is reported. The resulting carbon sponge demonstrates a high electrical conductivity of 0.03-4.72 S m^-1 and a low thermal conductivity of 0.027-0.038 W m^-1 K^-1 (20 °C, in ambient air), as well as a low density to ∼6 mg cm^-3. Additionally, the sponge exhibits mechanical flexibility, stability, excellent piezoresistivity, and an adjustable heating behavior. Hence, it could be utilized as a sensing device, including thermal management, making them promising for use in smart sportswear, human-machine interfaces, and wearable healthcare devices.

Controllable construction of hierarchically porous carbon composite of nanosheet network for advanced dual-carbon potassium-ion capacitors

Benefitting from the abundance and inexpensive nature of potassium resources, potassium-ion energy storage technology is considered a potential alternative to current lithium-ion systems. Potassium-ion capacitors (PICs) as a burgeoning K-ion electrochemical energy storage device, are capable of delivering high energy at high power without sacrificing lifespan. However, owing to the sluggish kinetics and significant volume change induced by the large K⁺-diameter, matched electrode materials with good ion accessibility and fast K⁺ intercalation/deintercalation capability are urgently desired. In this work, pine needles and graphene oxide (GO) are utilized as precursors to fabricate oxygen-doped activated carbon/graphene (OAC/G) porous nanosheet composites. The introduction of GO not only induces the generation of interconnected nanosheet network, but also increases the oxygen-doping content of the composite, thus expanding the graphite interlayer spacing. Experimental analysis combined with first-principle calculations reveal the transport/storage mechanism of K⁺ in the OAC/G composite anode, demonstrating that the high surface area, sufficient reactive sites, enlarged interlayer distance and open channels in the porous nanosheet network contribute to rapid and effective K⁺ diffusion and storage. When incorporated with pine needle-activated carbon as cathode, the assembled dual-carbon PICs can function at a high voltage of 5 V, exhibiting a high energy density of 156.7 Wh kg^-1 at a power density of 500 W kg^-1 along with a satisfied cycle life, which highlights their potential application in economic and advanced PICs.

High-Yielding Preparation of Hierarchically Branched Carbon Nanotubes Derived from Zeolitic Imidazolate Frameworks for Enhanced Electrochemical K+ Storage

Branched carbon nanotube is regarded as a very promising anode material of K-ion batteries, while the high-yielding preparation still remains challenging. We here demonstrate a facile approach for synthesizing N-doped...

Fast-Charging Nonaqueous Potassium-Ion Batteries Enabled by Rational Construction of Oxygen-Rich Porous Nanofiber Anodes

Practical applications of carbon anodes in high-power potassium-ion batteries (PIBs) were hampered by their limited rate properties, due to the sluggish K⁺ transport kinetics in the bulk. Constructing convenient ion/electron transfer channels in the electrode is of great importance to realize fast charge/discharge rates. Here, cross-linked porous carbon nanofibers (inner porous carbon nanotubes and outer soft carbon layer) modified with oxygen-containing functional groups were well designed as anodes to realize robust de-/potassiation kinetics. The novel anode delivered excellent rate capabilities (107 mAh g^-1 at 20 A g^-1 and 78 mAh g^-1 at 40 A g^-1) and superior cycling stability (76% capacity retention after 14,000 cycles at 2 A g^-1). In situ XRD measurement, in situ Raman spectra, and galvanostatic intermittent titration verified its surface-dominated potassium storage behavior with fast de-/potassiation kinetics, excellent reversibility, and rapid ion/electron transport. Moreover, theoretical investigation revealed that the carboxyl groups in the carbon offered additional capacitive adsorption sites for K⁺, thus significantly enhancing the reversible capacity. Surprisingly, a full cell using the anode and perylene-3,4,9,10-tetracarboxylic dianhydride cathode achieved an outstanding power density of 23,750 W kg^-1 and superior fast charge/slow discharge performance.

Regulation of nitrogen configurations and content in 3D porous carbons for improved lithium storage

The incorporation of active nitrogen species in carbon materials has been widely demonstrated as a viable means to produce superior lithium storage materials, while the precise regulation of nitrogen configurations as well as their content still remains a formidable challenge. Herein, nitrogen-free porous carbon frameworks were synthesized by a self-templating strategy from disodium citrate, and post-annealing yielded 10.4 at% N that was primarily pyrrolic-N and pyridinic-N with an atomic ratio of about 3 : 1, with negligible inactive graphitic-N. A gravimetric capacity of 570 mA h g^-1 at a current density of 4 A g^-1 was measured for a Li half-cell based on the as-prepared N-doped 3D carbon materials. Lithium-ion capacitors with this N-doped carbon as the anode and commercial AC as the cathode yielded energy densities of 58.9 and 142.6 W h kg^-1 with the corresponding power densities of 7400 and 185 W kg^-1, respectively. We suggest that the carbon materials with high content of pyrrolic-N and pyridinic-N especially pyrrolic-N have improved lithium storage.

Boosting potassium-storage performance via confining highly dispersed molybdenum dioxide nanoparticles within N-doped porous carbon nano-octahedrons

The development of durable and stable metal oxide anodes for potassium ion batteries (PIBs) has been hampered by poor electrochemical performance and ambiguous reaction mechanisms. Herein, we design and fabricate molybdenum dioxide (MoO₂)@N-doped porous carbon (NPC) nano-octahedrons through metal-organic frameworks derived strategy for PIBs with MoO₂ nanoparticles confined within NPC nano-octahedrons. Benefiting from the synergistic effect of nanoparticle level of MoO₂ and N-doped carbon porous nano-octahedrons, the MoO₂@NPC electrode exhibits superior electron/ion transport kinetics, excellent structural integrity, and impressive potassium-ion storage performance with enhanced cyclic stability and high-rate capability. The density functional theory calculations and experiment test proved that MoO₂@NPC has a higher affinity of potassium and higher conductivity than MoO₂ and N-doped carbon electrodes. Kinetics analysis revealed that surface pseudocapacitive contributions are greatly enhanced for MoO₂@NPC nano-octahedrons. In-situ and ex-situ analysis confirmed an intercalation reaction mechanism of MoO₂@NPC for potassium ion storage. Furthermore, the assembled MoO₂@NPC//perylenetetracarboxylic dianhydride (PTCDA) full cell exhibits good cycling stability with 72.6 mAh g^-1 retained at 100 mA g^-1 over 200 cycles. Therefore, this work present here not only evidences an effective and viable structural engineering strategy for enhancing the electrochemical behavior of MoO₂ material in PIBs, but also gives a comprehensive insight of kinetic and mechanism for potassium ion interaction with metal oxide.

A Flexible Multi-Channel Hollow CNT/Carbon Nanofiber Composites with S/N Co-Doping for Sodium/Potassium Ion Energy Storage

Carbon fibrous materials are the promising candidate for the anode of flexible sodium-ion batteries and potassium-ion batteries due to the structural advantages. However, the progress of mechanically robust anode materials with high electrochemical properties is still unsatisfactory for the flexible electrodes. Herein, the comprehensive design of the morphology with unique multi-channel hollow 1D/1D carbon nanotube/carbon nanofiber network and the lattice structure of carbon with S/N co-doping has been proposed. Benefiting from the enlarged interlayer spacing and the flexible fibrous network, the S/N doped carbon nanotube/carbon nanofiber composites (CNT/SNCF) possess not only high conductivity but also good structural stability during sodiation and potassiation processes. When used as anode materials in SIBs and PIBs, the free-standing CNT/SNCF electrodes exhibit high discharge capacities (274.1 and 212.5 mA h g^-1 at 1 A/g after 1000 cycles, respectively), superior cycle stability (150.4 and 100.1 mA h g^-1 at 5 A/g after 5000 cycles, respectively) and rate performance (109.3 mA h g^-1 at 10 A/g and 108.7 mA h g^-1 at 5 A/g, respectively), showing great prospects in flexible energy storage devices.

High Capacity and Fast Kinetics of Potassium-Ion Batteries Boosted by Nitrogen-Doped Mesoporous Carbon Spheres

In view of rich potassium resources and their working potential, potassium-ion batteries (PIBs) are deemed as next generation rechargeable batteries. Owing to carbon materials with the preponderance of durability and economic price, they are widely employed in PIBs anode materials. Currently, porosity design and heteroatom doping as efficacious improvement strategies have been applied to the structural design of carbon materials to improve their electrochemical performances. Herein, nitrogen-doped mesoporous carbon spheres (MCS) are synthesized by a facile hard template method. The MCS demonstrate larger interlayer spacing in a short range, high specific surface area, abundant mesoporous structures and active sites, enhancing K-ion migration and diffusion. Furthermore, we screen out the pyrolysis temperature of 900 °C and the pore diameter of 7 nm as optimized conditions for MCS to improve performances. In detail, the optimized MCS-7-900 electrode achieves high rate capacity (107.9 mAh g^-1 at 5000 mA g^-1) and stably brings about 3600 cycles at 1000 mA g^-1. According to electrochemical kinetic analysis, the capacitive-controlled effects play dominant roles in total storage mechanism. Additionally, the full-cell equipped MCS-7-900 as anode is successfully constructed to evaluate the practicality of MCS.

Facile Preparation of MoS2 Nanocomposites for Efficient Potassium-Ion Batteries by Grinding-Promoted Intercalation Exfoliation

Efficient exfoliations of bulk molybdenum disulfide (MoS₂ ) into few-layered nanosheets in pure phase are highly attractive because of the promising applications of the resulted 2D materials in diversified optoelectronic devices. Here, a new exfoliation method is presented to prepare semiconductive 2D hexagonal phase (2H phase) MoS₂ -cellulose nanocrystal (CNC) nanocomposites using grinding-promoted intercalation exfoliation (GPIE). This method with facile grinding of the bulk MoS₂ and CNC powder followed by conventional liquid-phase exfoliation in water can not only efficiently exfoliate 2H-MoS₂ nanosheets, but also produce the 2H-MoS₂ /CNC 2D nanocomposites simultaneously. Interestingly, the intercalated CNC sandwiched in MoS₂ nanosheets increases the interlayer spacing of 2H-MoS₂ , providing perfect conditions to accommodate the large-sized ions. Therefore, these nanocomposites are good anode materials of potassium-ion batteries (KIBs), showing a high reversible capacity of 203 mAh g^-1 at 200 mA g^-1 after 300 cycles, a good reversible capacity of 114 mAh g^-1 at 500 mA g^-1 , and a low decay of 0.02% per cycle over 1500 cycles. With these impressive KIB performances, this efficient GPIE method will open up a new avenue to prepare pure-phase MoS₂ and promising 2D nanocomposites for high-performance device applications.

High-Performance Joule Heating and Electromagnetic Shielding Properties of Anisotropic Carbon Scaffolds

Highly efficient electrical heaters along with excellent electromagnetic interference (EMI) shielding properties are urgently required for the progress of miniaturization electronics, artificial intelligence, and smart heating management setups. Herein, lignin removal, which comprises two efficient and versatile steps, followed by carbonization produces multifunctional carbon monoliths derived from natural wood. The obtained carbonized wood exhibits a high specific surface area (655.14 m²/g) and electrical (17.5 S/cm) and thermal conductivity (0.58 W/m·K), superhydrophilicity (contact angle of ∼0°), and excellent EMI shielding ability and Joule heating performance. The high electrical conductivity renders a low-voltage-actuated Joule heating performance and fascinating EMI shielding effectiveness of 55 dB, primarily resulting from the absorption mechanism. Moreover, regulation of the carbonized woods derived from the longitudinal to the radial direction enables transformation of hydrophilicity, strong thermal conductivity, and absorption-dominated EMI shielding to hydrophobicity, thermal insulation, and reflection-dominated EMI shielding. This is attributed to the unique anisotropic microstructure of carbon scaffolds. It is believed that these multifunctional carbon scaffolds can be used for intelligent electronics, EMI shielding, and thermal heating instruments.

3D tremella-like nitrogen-doped carbon encapsulated few-layer MoS2 for lithium-ion batteries

MoS₂ is regarded as an attractive anode material for lithium-ion batteries due to its layered structure and high theoretical specific capacity. Its unsatisfied conductivity and the considerable volume change during the charge and discharge process, however, limits its rate performance and cycling stability. Herein, 3D tremella-like nitrogen-doped carbon encapsulated few-layer MoS₂ (MoS₂@NC) hybrid is obtained via a unique strategy with simultaneously poly-dopamine carbonization, and molybdenum oxide specifies sulfurization. The three-dimensional porous nitrogen-doped carbon served both as a mechanical supporting structure for stabilization of few-layers MoS₂ and a good electron conductor. The MoS₂@NC exhibits enhanced high rate performance with a specific capacity of 208.7 mAh g^-1 at a current density of 10 A g^-1 and stable cycling performance with a capacity retention rate of 85.7% after 1000 cycles at 2 A g^-1.

Application-Driven Carbon Nanotube Functional Materials

Carbon nanotube functional materials (CNTFMs) represent an important research field in transforming nanoscience and nanotechnology into practical applications, with potential impact in a wide realm of science, technology, and engineering. In this review, we combine the state-of-the-art research activities of CNTFMs with the application prospect, to highlight critical issues and identify future challenges. We focus on macroscopic long fibers, thin films, and bulk sponges which are typical CNTFMs in different dimensions with distinct characteristics, and also cover a variety of derived composite/hierarchical materials. Critical issues related to their structures, properties, and applications as robust conductive skeletons or high-performance flexible electrodes in mechanical and electronic devices, advanced energy conversion and storage systems, and environmental areas have been discussed specifically. Finally, possible solutions and directions are proposed for overcoming current obstacles and promoting future efforts in the field.

State-of-the-art anodes of potassium-ion batteries: synthesis, chemistry, and applications

The growing demand for green energy has fueled the exploration of sustainable and eco-friendly energy storage systems. To date, the primary focus has been solely on the enhancement of lithium-ion battery (LIB) technologies. Recently, the increasing demand and uneven distribution of lithium resources have prompted extensive attention toward the development of other advanced battery systems. As a promising alternative to LIBs, potassium-ion batteries (KIBs) have attracted considerable interest over the past years owing to their resource abundance, low cost, and high working voltage. Capitalizing on the significant research and technological advancements of LIBs, KIBs have undergone rapid development, especially the anode component, and diverse synthesis techniques, potassiation chemistry, and energy storage applications have been systematically investigated and proposed. In this review, the necessity of exploring superior anode materials is highlighted, and representative KIB anodes as well as various structural construction approaches are summarized. Furthermore, critical issues, challenges, and perspectives of KIB anodes are meticulously organized and presented. With a strengthened understanding of the associated potassiation chemistry, the composition and microstructural modification of KIB anodes could be significantly improved.

Recent progress in electrochemical performance of binder-free anodes for potassium-ion batteries

Potassium ion batteries (PIBs) are regarded as one of the most promising candidates for large-scale stationary energy storage beyond lithium-ion batteries (LIBs), owing to the abundance of potassium resources and low cost. Unfortunately, the practical application of PIBs is severely restricted by their poor rate capacity and unsatisfactory cycle performance. In traditional electrodes, a binder usually plays an important role in integrating individual active materials with conductive additives. Nevertheless, binders are not only generally electrochemically inactive but also insulating, which is unfavorable for improving overall energy density and cycling stability. To this end, in terms of both improved electronic conductivity and electrochemical reaction reversibility, binder-free electrodes offer great potential for high-performance PIBs. Moreover, the anode is a crucial configuration to determine full cell electrochemical performance. Therefore, this review analyzes in detail the electrochemical properties of the different type binder-free anodes, including carbon-based substrates (graphene, carbon nanotubes, carbon nanofibers, and so on), MXene-based substrates and metal-based substrates (Cu and Ni). More importantly, the recent progress, critical issues, challenges, and perspectives in binder-free electrodes for PIBs are further discussed. This review will provide theoretical guidance for the synthesis of high-performance anode materials and promote the further development of PIBs.