Metadata Stewardship in Nanosafety Research: Community-Driven Organisation of Metadata Schemas to Support FAIR Nanoscience Data

The emergence of nanoinformatics as a key component of nanotechnology and nanosafety assessment for the prediction of engineered nanomaterials (NMs) properties, interactions, and hazards, and for grouping and read-across to reduce reliance on animal testing, has put the spotlight firmly on the need for access to high-quality, curated datasets. To date, the focus has been around what constitutes data quality and completeness, on the development of minimum reporting standards, and on the FAIR (findable, accessible, interoperable, and reusable) data principles. However, moving from the theoretical realm to practical implementation requires human intervention, which will be facilitated by the definition of clear roles and responsibilities across the complete data lifecycle and a deeper appreciation of what metadata is, and how to capture and index it. Here, we demonstrate, using specific worked case studies, how to organise the nano-community efforts to define metadata schemas, by organising the data management cycle as a joint effort of all players (data creators, analysts, curators, managers, and customers) supervised by the newly defined role of data shepherd. We propose that once researchers understand their tasks and responsibilities, they will naturally apply the available tools. Two case studies are presented (modelling of particle agglomeration for dose metrics, and consensus for NM dissolution), along with a survey of the currently implemented metadata schema in existing nanosafety databases. We conclude by offering recommendations on the steps forward and the needed workflows for metadata capture to ensure FAIR nanosafety data.

Integration among databases and data sets to support productive nanotechnology: Challenges and recommendations

Many groups within the broad field of nanoinformatics are already developing data repositories and analytical tools driven by their individual organizational goals. Integrating these data resources across disciplines and with non-nanotechnology resources can support multiple objectives by enabling the reuse of the same information. Integration can also serve as the impetus for novel scientific discoveries by providing the framework to support deeper data analyses. This article discusses current data integration practices in nanoinformatics and in comparable mature fields, and nanotechnology-specific challenges impacting data integration. Based on results from a nanoinformatics-community-wide survey, recommendations for achieving integration of existing operational nanotechnology resources are presented. Nanotechnology-specific data integration challenges, if effectively resolved, can foster the application and validation of nanotechnology within and across disciplines. This paper is one of a series of articles by the Nanomaterial Data Curation Initiative that address data issues such as data curation workflows, data completeness and quality, curator responsibilities, and metadata.

Interpreting Mobile and Handheld Air Sensor Readings in Relation to Air Quality Standards and Health Effect Reference Values: Tackling the Challenges

The US Environmental Protection Agency (EPA) and other federal agencies face a number of challenges in interpreting and reconciling short-duration (seconds to minutes) readings from mobile and handheld air sensors with the longer duration averages (hours to days) associated with the National Ambient Air Quality Standards (NAAQS) for the criteria pollutants-particulate matter (PM), ozone, carbon monoxide, lead, nitrogen oxides, and sulfur oxides. Similar issues are equally relevant to the hazardous air pollutants (HAPs) where chemical-specific health effect reference values are the best indicators of exposure limits; values which are often based on a lifetime of continuous exposure. A multi-agency, staff-level Air Sensors Health Group (ASHG) was convened in 2013. ASHG represents a multi-institutional collaboration of Federal agencies devoted to discovery and discussion of sensor technologies, interpretation of sensor data, defining the state of sensor-related science across each institution, and provides consultation on how sensors might effectively be used to meet a wide range of research and decision support needs. ASHG focuses on several fronts: improving the understanding of what hand-held sensor technologies may be able to deliver; communicating what hand-held sensor readings can provide to a number of audiences; the challenges of how to integrate data generated by multiple entities using new and unproven technologies; and defining best practices in communicating health-related messages to various audiences. This review summarizes the challenges, successes, and promising tools of those initial ASHG efforts and Federal agency progress on crafting similar products for use with other NAAQS pollutants and the HAPs. NOTE: The opinions expressed are those of the authors and do not necessary represent the opinions of their Federal Agencies or the US Government. Mention of product names does not constitute endorsement.

SPECIFIC BLOOD ABSORPTION PARAMETERS FOR 239PUO2 AND 238PUO2 NANOPARTICLES AND IMPACTS ON BIOASSAY INTERPRETATION

Specific absorption parameters for 239PuO2 and 238PuO2 have been determined based on available biokinetic data from studies in rodents, and the impacts of these parameters on bioassay interpretation and dosimetry after inhalation of nanoPuO2 materials have been evaluated. Calculations of activities after an acute intake of nanoparticles of 239PuO2 and 238PuO2 are compared with the corresponding calculations using standard default absorption parameters using the International Commission on Radiological Protection (ICRP) 66 respiratory tract model. Committed effective doses are also evaluated and compared. In this case, it was found that interpretation of bioassay measurements with the assumption that the biokinetic behaviour of PuO2 nanoparticles is the same as that of micrometre-sized particles can result in an overprediction of the committed effective dose by two orders of magnitude. Although in this case the use of the default assumptions (5 µm AMAD, Type S) for assessing dose following inhalation exposure to airborne PuO2 nanoparticles appears to be conservative, the evaluation of situations involving PuO2 nanoparticles that may have different particle size and solubility properties should prudently follow the ICRP recommendation to obtain and use additional, material-specific information whenever possible.

Adaptive Visual Sort and Summary of Micrographic Images of Nanoparticles for Forensic Analysis

Image classification of nanoparticles from scanning electron microscopes for nuclear forensic analysis is a long, time consuming process. Months of analyst time may initially be required to sift through images in order to categorize morphological characteristics associated with nanoparticle identification. Subsequent assessment of newly acquired images against identified characteristics can be equally time consuming. We present INStINCt, our Intelligent Signature Canvas, as a framework for quickly organizing image data in a web-based canvas framework that partitions images based on features derived from convolutional neural networks. This work is demonstrated using particle images from an aerosol study conducted by Pacific Northwest National Laboratory under the auspices of the U.S. Army Public Health Command to determine depleted uranium aerosol doses and risks.

INHALED AEROSOL DOSIMETRY: SOME CURRENT RESEARCH NEEDS

After the presentation of 60 papers at the conference "Advancing Aerosol Dosimetry Research" (October 24-25, 2014 in Irvine, CA, USA), attendees submitted written descriptions of needed research. About 40 research needs were submitted. The suggestions fell into six broad categories: 1) Access to detailed anatomic data; 2) Access to subject-specific aerosol deposition datasets; 3) Improving current inhaled aerosol deposition models; 4) Some current experimental data needs and hot topics; 5) Linking exposure and deposition modeling to health endpoints; and 6) Developing guidelines for appropriate validation of dosimetry and risk assessment models. Summaries of suggestions are provided here as an update on research needs related to inhaled aerosol dosimetry modeling. Taken together, the recommendations support the overarching need for increased collaborations between dose modelers and those that use the models for risk assessments, aerosol medicine applications, design of toxicology experiments, and extrapolation across species. This paper is only a snapshot in time of perceived research needs from the conference attendees; it does not carry the approval of any agency or other group that plans research priorities or that funds research.

Bridging the gap between exposure assessment and inhalation toxicology: Some insights from the carbon nanotube experience

The early incorporation of exposure assessment can be invaluable to help design, prioritize, and interpret toxicological studies or outcomes. The sum total of the exposure assessment findings combined with preliminary toxicology results allows for exposure-informed toxicological study design and the findings can then be integrated, together with available epidemiologic data, to provide health effect relevance. With regard to engineered nanomaterial inhalation toxicology in particular, a single type of material (e.g. carbon nanotube, graphene) can have a vast array of physicochemical characteristics resulting in the potential for varying toxicities. To compound the matter, the methodologies necessary to establish a material adequate for in vivo exposure testing raises questions on the applicability of the outcomes. From insights gained from evaluating carbon nanotubes, we recommend the following integrated approach involving exposure-informed hazard assessment and hazard-informed exposure assessment especially for materials as diverse as engineered nanomaterials: 1) market-informed identification of potential hazards and potentially exposed populations, 2) initial toxicity screening to drive prioritized assessments of exposure, 3) development of exposure assessment-informed chronic and sub-chronic in vivo studies, and 4) conduct of exposure- and hazard-informed epidemiological studies.

Use of the "Exposome" in the Practice of Epidemiology: A Primer on -Omic Technologies

The exposome has been defined as the totality of exposures individuals experience over the course of their lives and how those exposures affect health. Three domains of the exposome have been identified: internal, specific external, and general external. Internal factors are those that are unique to the individual, and specific external factors include occupational exposures and lifestyle factors. The general external domain includes sociodemographic factors such as educational level and financial status. Eliciting information on the exposome is daunting and not feasible at present; the undertaking may never be fully realized. A variety of tools have been identified to measure the exposome. Biomarker measurements will be one of the major tools in exposomic studies. However, exposure data can also be obtained from other sources such as sensors, geographic information systems, and conventional tools such as survey instruments. Proof-of-concept studies are being conducted that show the promise of exposomic investigation and the integration of different kinds of data. The inherent value of exposomic data in epidemiologic studies is that they can provide greater understanding of the relationships among a broad range of chemical and other risk factors and health conditions and ultimately lead to more effective and efficient disease prevention and control.

How should the completeness and quality of curated nanomaterial data be evaluated?

Nanotechnology is of increasing significance. Curation of nanomaterial data into electronic databases offers opportunities to better understand and predict nanomaterials' behaviour. This supports innovation in, and regulation of, nanotechnology. It is commonly understood that curated data need to be sufficiently complete and of sufficient quality to serve their intended purpose. However, assessing data completeness and quality is non-trivial in general and is arguably especially difficult in the nanoscience area, given its highly multidisciplinary nature. The current article, part of the Nanomaterial Data Curation Initiative series, addresses how to assess the completeness and quality of (curated) nanomaterial data. In order to address this key challenge, a variety of related issues are discussed: the meaning and importance of data completeness and quality, existing approaches to their assessment and the key challenges associated with evaluating the completeness and quality of curated nanomaterial data. Considerations which are specific to the nanoscience area and lessons which can be learned from other relevant scientific disciplines are considered. Hence, the scope of this discussion ranges from physicochemical characterisation requirements for nanomaterials and interference of nanomaterials with nanotoxicology assays to broader issues such as minimum information checklists, toxicology data quality schemes and computational approaches that facilitate evaluation of the completeness and quality of (curated) data. This discussion is informed by a literature review and a survey of key nanomaterial data curation stakeholders. Finally, drawing upon this discussion, recommendations are presented concerning the central question: how should the completeness and quality of curated nanomaterial data be evaluated?

Toward the Responsible Development and Commercialization of Sensor Nanotechnologies

Nanotechnology-enabled sensors (or nanosensors) will play an important role in enabling the progression toward ubiquitous information systems as the Internet of Things (IoT) emerges. Nanosensors offer new, miniaturized solutions in physiochemical and biological sensing that enable increased sensitivity, specificity, and multiplexing capability, all with the compelling economic drivers of low cost and high-energy efficiency. In the United States, Federal agencies participating in the National Nanotechnology Initiative (NNI) "Nanotechnology for Sensors and Sensors for Nanotechnology: Improving and Protecting Health, Safety, and the Environment" Nanotechnology Signature Initiative (the Sensors NSI), address both the opportunity of using nanotechnology to advance sensor development and the challenges of developing sensors to keep pace with the increasingly widespread use of engineered nanomaterials. This perspective article will introduce and provide background on the NNI signature initiative on sensors. Recent efforts by the Sensors NSI aimed at promoting the successful development and commercialization of nanosensors will be reviewed and examples of sensor nanotechnologies will be highlighted. Future directions and critical challenges for sensor development will also be discussed.

Commentary on the contributions and future role of occupational exposure science in a vision and strategy for the discipline of exposure science

Exposure science is a holistic concept without prejudice to exposure source. Traditionally, measurements aimed at mitigating environmental exposures have not included exposures in the workplace, instead considering such exposures to be an internal affair between workers and their employers. Similarly, occupational (or industrial) hygiene has not typically accounted for environmental contributions to poor health at work. Many persons spend a significant amount of their lifetime in the workplace, where they maybe exposed to more numerous chemicals at higher levels than elsewhere in their environment. In addition, workplace chemical exposures and other exogenous stressors may increase epigenetic and germline modifications that are passed on to future generations. We provide a brief history of the development of exposure science from its roots in the assessment of workplace exposures, including an appendix where we detail current resources for education and training in exposure science offered through occupational hygiene organizations. We describe existing successful collaborations between occupational and environmental practitioners in the field of exposure science, which may serve as a model for future interactions. Finally, we provide an integrated vision for the field of exposure science, emphasizing interagency collaboration, the need for complete exposure information in epidemiological studies, and the importance of integrating occupational, environmental, and residential assessments. Our goal is to encourage communication and spur additional collaboration between the fields of occupational and environmental exposure assessment. Providing a more comprehensive approach to exposure science is critical to the study of the "exposome", which conceptualizes the totality of exposures throughout a person's life, not only chemical, but also from diet, stress, drugs, infection, and so on, and the individual response.

Turning Numbers into Knowledge: Sensors for Safety, Health, Well-being, and Productivity

The industrial hygiene community has witnessed exponential growth in the use of sensors, especially by individuals. Remote wireless sensors are now monitoring worker health, the environment, agriculture, work sites, disaster relief, and "smart" buildings and facilities.

Application of an informatics-based decision-making framework and process to the assessment of radiation safety in nanotechnology

The National Council on Radiation Protection and Measurements (NCRP) established NCRP Scientific Committee 2-6 to develop a report on the current state of knowledge and guidance for radiation safety programs involved with nanotechnology. Nanotechnology is the understanding and control of matter at the nanoscale, at dimensions between ∼1 and 100 nm, where unique phenomena enable novel applications. While the full report is in preparation, this paper presents and applies an informatics-based decision-making framework and process through which the radiation protection community can anticipate that nano-enabled applications, processes, nanomaterials, and nanoparticles are likely to become present or are already present in radiation-related activities; recognize specific situations where environmental and worker safety, health, well-being, and productivity may be affected by nano-related activities; evaluate how radiation protection practices may need to be altered to improve protection; control information, interpretations, assumptions, and conclusions to implement scientifically sound decisions and actions; and confirm that desired protection outcomes have been achieved. This generally applicable framework and supporting process can be continuously applied to achieve health and safety at the convergence of nanotechnology and radiation-related activities.

The Nanomaterial Data Curation Initiative: A collaborative approach to assessing, evaluating, and advancing the state of the field

The Nanomaterial Data Curation Initiative (NDCI), a project of the National Cancer Informatics Program Nanotechnology Working Group (NCIP NanoWG), explores the critical aspect of data curation within the development of informatics approaches to understanding nanomaterial behavior. Data repositories and tools for integrating and interrogating complex nanomaterial datasets are gaining widespread interest, with multiple projects now appearing in the US and the EU. Even in these early stages of development, a single common aspect shared across all nanoinformatics resources is that data must be curated into them. Through exploration of sub-topics related to all activities necessary to enable, execute, and improve the curation process, the NDCI will provide a substantive analysis of nanomaterial data curation itself, as well as a platform for multiple other important discussions to advance the field of nanoinformatics. This article outlines the NDCI project and lays the foundation for a series of papers on nanomaterial data curation. The NDCI purpose is to: 1) present and evaluate the current state of nanomaterial data curation across the field on multiple specific data curation topics, 2) propose ways to leverage and advance progress for both individual efforts and the nanomaterial data community as a whole, and 3) provide opportunities for similar publication series on the details of the interactive needs and workflows of data customers, data creators, and data analysts. Initial responses from stakeholder liaisons throughout the nanoinformatics community reveal a shared view that it will be critical to focus on integration of datasets with specific orientation toward the purposes for which the individual resources were created, as well as the purpose for integrating multiple resources. Early acknowledgement and undertaking of complex topics such as uncertainty, reproducibility, and interoperability is proposed as an important path to addressing key challenges within the nanomaterial community, such as reducing collateral negative impacts and decreasing the time from development to market for this new class of technologies.

Opportunities and challenges of nanotechnology in the green economy

In a world of finite resources and ecosystem capacity, the prevailing model of economic growth, founded on ever-increasing consumption of resources and emission pollutants, cannot be sustained any longer. In this context, the "green economy" concept has offered the opportunity to change the way that society manages the interaction of the environmental and economic domains. To enable society to build and sustain a green economy, the associated concept of "green nanotechnology" aims to exploit nano-innovations in materials science and engineering to generate products and processes that are energy efficient as well as economically and environmentally sustainable. These applications are expected to impact a large range of economic sectors, such as energy production and storage, clean up-technologies, as well as construction and related infrastructure industries. These solutions may offer the opportunities to reduce pressure on raw materials trading on renewable energy, to improve power delivery systems to be more reliable, efficient and safe as well as to use unconventional water sources or nano-enabled construction products therefore providing better ecosystem and livelihood conditions.However, the benefits of incorporating nanomaterials in green products and processes may bring challenges with them for environmental, health and safety risks, ethical and social issues, as well as uncertainty concerning market and consumer acceptance. Therefore, our aim is to examine the relationships among guiding principles for a green economy and opportunities for introducing nano-applications in this field as well as to critically analyze their practical challenges, especially related to the impact that they may have on the health and safety of workers involved in this innovative sector. These are principally due to the not fully known nanomaterial hazardous properties, as well as to the difficulties in characterizing exposure and defining emerging risks for the workforce. Interestingly, this review proposes action strategies for the assessment, management and communication of risks aimed to precautionary adopt preventive measures including formation and training of employees, collective and personal protective equipment, health surveillance programs to protect the health and safety of nano-workers. It finally underlines the importance that occupational health considerations will have on achieving an effectively sustainable development of nanotechnology.

Nanoinformatics workshop report: Current resources, community needs, and the proposal of a collaborative framework for data sharing and information integration

The quantity of information on nanomaterial properties and behavior continues to grow rapidly. Without a concerted effort to collect, organize and mine disparate information coming out of current research efforts, the value and effective use of this information will be limited at best. Data will not be translated to knowledge. At worst, erroneous conclusions will be drawn and future research may be misdirected. Nanoinformatics can be a powerful approach to enhance the value of global information in nanoscience and nanotechnology. Much progress has been made through grassroots efforts in nanoinformatics resulting in a multitude of resources and tools for nanoscience researchers. In 2012, the nanoinformatics community believed it was important to critically evaluate and refine currently available nanoinformatics approaches in order to best inform the science and support the future of predictive nanotechnology. The Greener Nano 2012: Nanoinformatics Tools and Resources Workshop brought together informatics groups with materials scientists active in nanoscience research to evaluate and reflect on the tools and resources that have recently emerged in support of predictive nanotechnology. The workshop goals were to establish a better understanding of current nanoinformatics approaches and to clearly define immediate and projected informatics infrastructure needs of the nanotechnology community. The theme of nanotechnology environmental health and safety (nanoEHS) was used to provide real-world, concrete examples on how informatics can be utilized to advance our knowledge and guide nanoscience. The benefit here is that the same properties that impact the performance of products could also be the properties that inform EHS. From a decision management standpoint, the dual use of such data should be considered a priority. Key outcomes include a proposed collaborative framework for data collection, data sharing and information integration.

Exposures and cross-shift lung function declines in wildland firefighters

Respiratory problems are common among wildland firefighters. However, there are few studies directly linking occupational exposures to respiratory effects in this population. Our objective was to characterize wildland fire fighting occupational exposures and assess their associations with cross-shift changes in lung function. We studied 17 members of the Alpine Interagency Hotshot Crew with environmental sampling and pulmonary function testing during a large wildfire. We characterized particles by examining size distribution and mass concentration, and conducting elemental and morphological analyses. We examined associations between cross-shift lung function change and various analytes, including levoglucosan, an indicator of wood smoke from burning biomass. The levoglucosan component of the wildfire aerosol showed a predominantly bimodal size distribution: a coarse particle mode with a mass median aerodynamic diameter about 12 μm and a fine particle mode with a mass median aerodynamic diameter < 0.5 μm. Levoglucosan was found mainly in the respirable fraction and its concentration was higher for fire line construction operations than for mop-up operations. Larger cross-shift declines in forced expiratory volume in one second were associated with exposure to higher concentrations of respirable levoglucosan (p < 0.05). Paired analyses of real-time personal air sampling measurements indicated that higher carbon monoxide (CO) concentrations were correlated with higher particulate concentrations when examined by mean values, but not by individual data points. However, low CO concentrations did not provide reliable assurance of concomitantly low particulate concentrations. We conclude that inhalation of fine smoke particles is associated with acute lung function decline in some wildland firefighters. Based on short-term findings, it appears important to address possible long-term respiratory health issues for wildland firefighters. [Supplementary materials are available for this article. Go to the publisher's online edition of Journal of Occupational and Environmental Hygiene for the following free supplemental resources: a file containing additional information on historical studies of wildland fire exposures, a file containing the daily-exposure-severity questionnaire completed by wildland firefighter participants at the end of each day, and a file containing additional details of the investigation of correlations between carbon monoxide concentrations and other measured exposure factors in the current study.].

Informatics and standards for nanomedicine technology

There are several issues to be addressed concerning the management and effective use of information (or data), generated from nanotechnology studies in biomedical research and medicine. These data are large in volume, diverse in content, and are beset with gaps and ambiguities in the description and characterization of nanomaterials. In this work, we have reviewed three areas of nanomedicine informatics: information resources; taxonomies, controlled vocabularies, and ontologies; and information standards. Informatics methods and standards in each of these areas are critical for enabling collaboration; data sharing; unambiguous representation and interpretation of data; semantic (meaningful) search and integration of data; and for ensuring data quality, reliability, and reproducibility. In particular, we have considered four types of information standards in this article, which are standard characterization protocols, common terminology standards, minimum information standards, and standard data communication (exchange) formats. Currently, because of gaps and ambiguities in the data, it is also difficult to apply computational methods and machine learning techniques to analyze, interpret, and recognize patterns in data that are high dimensional in nature, and also to relate variations in nanomaterial properties to variations in their chemical composition, synthesis, characterization protocols, and so on. Progress toward resolving the issues of information management in nanomedicine using informatics methods and standards discussed in this article will be essential to the rapidly growing field of nanomedicine informatics.

Certification of beryllium mass fraction in SRM 1877 Beryllium Oxide Powder using high-performance inductively coupled plasma optical emission spectrometry with exact matching

High-performance inductively coupled plasma optical emission spectrometry (HP-ICP-OES) was used to certify the Be mass fraction in National Institute of Standards and Technology (NIST) Standard Reference Material (SRM) 1877 Beryllium Oxide Powder. The certified value and expanded uncertainty expressed at a 95% confidence level is (0.3576 +/- 0.0024) g/g. To obtain best results, the Be mass fractions, Mn (internal standard) mass fractions, and matrix compositions of the calibration solutions were carefully matched to those of the sample solutions for each individual HP-ICP-OES analysis. This "exact matching" approach was used because experience at NIST has shown that it often affords improved accuracy and precision in HP-ICP-OES analysis. NIST has never published these observations. Due to the toxicity of BeO and the difficulty of containing the very fine powder material, sets of solutions for HP-ICP-OES analysis were prepared by laboratories collaborating with NIST who have the experience and equipment needed to work with the material safely. Each laboratory utilized a unique digestion protocol(s). After preparing the sets of solutions, the collaborating laboratories shipped them to NIST for HP-ICP-OES analysis. NIST provided the collaborating laboratories with solution preparation kits and spreadsheets to help establish traceability of the HP-ICP-OES results to the International System of Units (SI) and to allow exact matching to be accomplished. The agreement observed among the four individual Be mass fraction values determined from the sets of solutions prepared by the collaborating laboratories was 0.074% relative (1s of mean). The excellent agreement provides a measure of confidence in the robustness of each of the digestion procedures, as well as in the certified Be mass fraction value. The analytical benefits of using exact matching for this particular certification were investigated. Results show that exactly matching the matrix compositions of the standards to the samples for each HP-ICP-OES analysis was critical to obtaining the excellent agreement observed among the individual Be mass fraction values and also helped to minimize bias and uncertainty in the certified value. Unlike previous NIST studies, exactly matching the Be and Mn mass fractions of the standards to the samples for this particular certification appears to have had little effect on the data.

Characterization of exposures to airborne nanoscale particles during friction stir welding of aluminum

Friction stir welding (FSW) is considered one of the most significant developments in joining technology over the last half century. Its industrial applications are growing steadily and so are the number of workers using this technology. To date, there are no reports on airborne exposures during FSW. The objective of this study was to investigate possible emissions of nanoscale (<100 nm) and fine (<1 microm) aerosols during FSW of two aluminum alloys in a laboratory setting and characterize their physicochemical composition. Several instruments measured size distributions (5 nm to 20 microm) with 1-s resolution, lung deposited surface areas, and PM(2.5) concentrations at the source and at the breathing zone (BZ). A wide range aerosol sampling system positioned at the BZ collected integrated samples in 12 stages (2 nm to 20 microm) that were analyzed for several metals using inductively coupled plasma mass spectrometry. Airborne aerosol was directly collected onto several transmission electron microscope grids and the morphology and chemical composition of collected particles were characterized extensively. FSW generates high concentrations of ultrafine and submicrometer particles. The size distribution was bimodal, with maxima at approximately 30 and approximately 550 nm. The mean total particle number concentration at the 30 nm peak was relatively stable at approximately 4.0 x 10(5) particles cm(-3), whereas the arithmetic mean counts at the 550 nm peak varied between 1500 and 7200 particles cm(-3), depending on the test conditions. The BZ concentrations were lower than the source concentrations by 10-100 times at their respective peak maxima and showed higher variability. The daylong average metal-specific concentrations were 2.0 (Zn), 1.4 (Al), and 0.24 (Fe) microg m(-3); the estimated average peak concentrations were an order of magnitude higher. Potential for significant exposures to fine and ultrafine aerosols, particularly of Al, Fe, and Zn, during FSW may exist, especially in larger scale industrial operations.

Validation of analytical methods and instrumentation for beryllium measurement: review and summary of available guides, procedures, and protocols

This document provides a listing of available sources that can be used to validate analytical methods and/or instrumentation for beryllium determination. A literature review was conducted of available standard methods and publications used for method validation and/or quality control. An annotated listing of the articles, papers, and books reviewed is given in the Appendix. Available validation documents and guides are listed therein; each has a brief description of application and use. In the referenced sources, there are varying approaches to validation and varying descriptions of the validation process at different stages in method development. This discussion focuses on validation and verification of fully developed methods and instrumentation that have been offered for use or approval by other laboratories or official consensus bodies such as ASTM International, the International Standards Organization, the International Electrotechnical Commission, and the Association of Official Analytical Chemists. This review was conducted as part of a collaborative effort to investigate and improve the state of validation for measuring beryllium in the workplace and the environment. Documents and publications from the United States and Europe are included.

Aerosol sampling system for collection of Capstone depleted uranium particles in a high-energy environment

The Capstone Depleted Uranium (DU) Aerosol Study was undertaken to obtain aerosol samples resulting from a large-caliber DU penetrator striking an Abrams or Bradley test vehicle. The sampling strategy was designed to (1) optimize the performance of the samplers and maintain their integrity in the extreme environment created during perforation of an armored vehicle by a DU penetrator, (2) collect aerosols as a function of time post perforation, and (3) obtain size-classified samples for analysis of chemical composition, particle morphology, and solubility in lung fluid. This paper describes the experimental setup and sampling methodologies used to achieve these objectives. Custom-designed arrays of sampling heads were secured to the inside of the target in locations approximating the breathing zones of the crew locations in the test vehicles. Each array was designed to support nine filter cassettes and nine cascade impactors mounted with quick-disconnect fittings. Shielding and sampler placement strategies were used to minimize sampler loss caused by the penetrator impact and the resulting fragments of eroded penetrator and perforated armor. A cyclone train was used to collect larger quantities of DU aerosol for measurement of chemical composition and solubility. A moving filter sample was used to obtain semicontinuous samples for DU concentration determination. Control for the air samplers was provided by five remotely located valve control and pressure monitoring units located inside and around the test vehicle. These units were connected to a computer interface chassis and controlled using a customized LabVIEW engineering computer control program. The aerosol sampling arrays and control systems for the Capstone study provided the needed aerosol samples for physicochemical analysis, and the resultant data were used for risk assessment of exposure to DU aerosol.

Raw single-wall carbon nanotubes induce oxidative stress and activate MAPKs, AP-1, NF-kappaB, and Akt in normal and malignant human mesothelial cells

BACKGROUND

Single-wall carbon nanotubes (SWCNTs), with their unique physicochemical and mechanical properties, have many potential new applications in medicine and industry. There has been great concern subsequent to preliminary investigations of the toxicity, biopersistence, pathogenicity, and ability of SWCNTs to translocate to subpleural areas. These results compel studies of potential interactions of SWCNTs with mesothelial cells.

OBJECTIVE

Exposure to asbestos is the primary cause of malignant mesothelioma in 80-90% of individuals who develop the disease. Because the mesothelial cells are the primary target cells of asbestos-induced molecular changes mediated through an oxidant-linked mechanism, we used normal mesothelial and malignant mesothelial cells to investigate alterations in molecular signaling in response to a commercially manufactured SWCNT.

METHODS

In the present study, we exposed mesothelial cells to SWCNTs and investigated reactive oxygen species (ROS) generation, cell viability, DNA damage, histone H2AX phosphorylation, activation of poly(ADP-ribose) polymerase 1 (PARP-1), stimulation of extracellular signal-regulated kinase (ERKs), Jun N-terminal kinases (JNKs), protein p38, and activation of activator protein-1 (AP-1), nuclear factor kappaB (NF-kappaB), and protein serine-threonine kinase (Akt).

RESULTS

Exposure to SWCNTs induced ROS generation, increased cell death, enhanced DNA damage and H2AX phosphorylation, and activated PARP, AP-1, NF-kappaB, p38, and Akt in a dose-dependent manner. These events recapitulate some of the key molecular events involved in mesothelioma development associated with asbestos exposure.

CONCLUSIONS

The cellular and molecular findings reported here do suggest that SWCNTs can cause potentially adverse cellular responses in mesothelial cells through activation of molecular signaling associated with oxidative stress, which is of sufficient significance to warrant in vivo animal exposure studies.

Differences in estimates of size distribution of beryllium powder materials using phase contrast microscopy, scanning electron microscopy, and liquid suspension counter techniques

Accurate characterization of the physicochemical properties of aerosols generated for inhalation toxicology studies is essential for obtaining meaningful results. Great emphasis must also be placed on characterizing particle properties of materials as administered in inhalation studies. Thus, research is needed to identify a suite of techniques capable of characterizing the multiple particle properties (i.e., size, mass, surface area, number) of a material that may influence toxicity. The purpose of this study was to characterize the morphology and investigate the size distribution of a model toxicant, beryllium. Beryllium metal, oxides, and alloy particles were aerodynamically size-separated using an aerosol cyclone, imaged dry using scanning electron microscopy (SEM), then characterized using phase contrast microscopy (PCM), a liquid suspension particle counter (LPC), and computer-controlled SEM (CCSEM). Beryllium metal powder was compact with smaller sub-micrometer size particles attached to the surface of larger particles, whereas the beryllium oxides and alloy particles were clusters of primary particles. As expected, the geometric mean (GM) diameter of metal powder determined using PCM decreased with aerodynamic size, but when suspended in liquid for LPC or CCSEM analysis, the GM diameter decreased by a factor of two (p < 0.001). This observation suggested that the smaller submicrometer size particles attached to the surface of larger particles and/or particle agglomerates detach in liquid, thereby shifting the particle size distribution downward. The GM diameters of the oxide materials were similar regardless of sizing technique, but observed differences were generally significant (p < 0.001). For oxides, aerodynamic cluster size will dictate deposition in the lung, but primary particle size may influence biological activity. The GM diameter of alloy particles determined using PCM became smaller with decreasing aerodynamic size fraction; however, when suspended in liquid for CCSEM and LPC analyses, GM particle size decreased by a factor of two (p < 0.001) suggesting that alloy particles detach in liquid. Detachment of particles in liquid could have significance for the expected versus actual size (and number) distribution of aerosol delivered to an exposure subject. Thus, a suite of complimentary analytical techniques may be necessary for estimating size distribution. Consideration should be given to thoroughly understanding the influence of any liquid vehicle which may alter the expected aerosol size distribution.

A theoretical framework for evaluating analytical digestion methods for poorly soluble particulate beryllium

Complete digestion of all chemical forms and sizes of particulate analytes in environmental samples is usually necessary to obtain accurate results with atomic spectroscopy. In the current study, we investigate the physicochemical properties of beryllium particles likely to be encountered in samples collected from different occupational environments and present a hypothesis that a dissolution theory can be used as a conceptual framework to guide development of strategies for digestion procedures. For monodisperse single-chemical constituent primary particles, such as those encountered when handling some types of beryllium oxide (BeO) powder, theory predicts that a digestion procedure is sufficient when it completely dissolves all primary particles, independent of cluster size. For polydisperse single-chemical constituent particles, such as those encountered during the handling of some types of beryllium metal powder, theory predicts that a digestion procedure is sufficient only when it completely dissolves the largest particle in the sample. For samples with unknown or multi-chemical constituent particles and with particles having undefined sizes, e.g., fume emissions from a copper-beryllium alloy furnace operation or dust from a beryl ore crushing operation, a surface area-limited and single-constituent-dependent dissolution theory may not predict complete dissolution, thereby requiring non-routine robust treatment procedures with post-digestion filtration, followed by examination of residual particulate material. Additionally, for beryllium, and likely other poorly soluble materials, particulate reference materials of various chemical forms and size distributions are needed to better evaluate and harmonize analytical digestion procedures. Figure Generation of aerosol particles during machining of beryllium oxide.

Exposure Pathway Assessment at a Copper–Beryllium Alloy Facility

Controlling beryllium inhalation exposures to comply with regulatory levels (2 micro g m(-3) of air) does not appear to prevent beryllium sensitization and chronic beryllium disease (CBD). Additionally, it has proven difficult to establish a clear inhalation exposure-response relationship for beryllium sensitization and CBD. Thus, skin may be an important route of exposure that leads to beryllium sensitization. A 2000 survey had identified prevalence of sensitization (7%) and CBD (4%) in a beryllium alloy facility. An improved particulate migration control program, including dermal protection in production areas, was completed in 2002 at the facility. The purpose of this study was to evaluate levels of beryllium in workplace air, on work surfaces, on cotton gloves worn by employees over nitrile gloves, and on necks and faces of employees subsequent to implementation of the program. Over a 6 day period, we collected general area air samples (n = 10), wipes from routinely handled work surfaces (n = 252), thin cotton glove samples (n = 113) worn by employees, and neck wipes (n = 109) and face wipes (n = 109) from the same employees. In production, production support and office areas geometric mean (GM) levels of beryllium were 0.95, 0.59 and 0.05 micro g per 100 cm(2) on work surfaces; 42.8, 73.8 and 0.07 micro g per sample on cotton gloves; 0.07, 0.09 and 0.003 micro g on necks; and 0.07, 0.12 and 0.003 micro g on faces, respectively. Correlations were strong between beryllium in air and on work surfaces (r = 0.79), and between beryllium on cotton gloves and on work surfaces (0.86), necks (0.87) and faces (0.86). This study demonstrates that, even with the implementation of control measures to reduce skin contact with beryllium as part of a comprehensive workplace protection program, measurable levels of beryllium continue to reach the skin of workers in production and production support areas. Based on our current understanding of the multiple exposure pathways that may lead to sensitization, we support prudent control practices such as use of protective gloves to minimize skin exposure to beryllium salts and fine particles.

Effects of aerosolized feedyard dust that contains natural endotoxins on adult sheep

OBJECTIVE

To determine the clinical, clinicopathologic, and histologic effects of aerosolized feedyard dust that contains natural endotoxins on adult sheep.

ANIMALS

Eighteen 3-year-old Saint Croix sheep.

PROCEDURE

A prospective randomized controlled study was conducted. There were 2 treatment groups (dust-endotoxin group, n = 9; control group, 9). Aerosolized feedyard dust was provided continuously during a 4-hour period for each application (once in week 1, 3 times in week 2, and 7 times in week 3) to sheep in a semiairtight tent. All sheep were euthanatized and necropsied 8 hours after the treatment group received the last dust treatment. Variables measured before and after each dust treatment were rectal temperature, total WBC count, and concentrations of fibrinogen and haptoglobin.

RESULTS

Mean amount of dust administered during each treatment was 451 g/4 h. Filter collection indicated 51 mg of dust/m3 and 7,423 ng of endotoxin. Mean rectal temperature at 8 hours (40.4 C) and mean WBC counts 12 and 24 hours after dust treatment were significantly higher for the treated group than the means of the respective variables for the control group. Similar responses were observed with repeated dust-endotoxin treatments; however, with each subsequent treatment, there was a diminished response. Sheep in the treatment group had generalized alveolar septal thickening and hypercellularity.

CONCLUSIONS AND CLINICAL RELEVANCE

Feedyard dust induced a temporary febrile response and leukocytosis in sheep in the treatment group. Exposure to dust that contains endotoxins may be a stressor preceding acute infectious respiratory tract disease of marketed sheep.

Differences in dissolution behavior in a phagolysosomal simulant fluid for single-constituent and multi-constituent materials associated with beryllium sensitization and chronic beryllium disease

Particle dissolution within macrophage phagolysosomes is hypothesized to be an important source of dissolved beryllium for input to the cell-mediated immune reaction associated with development of beryllium sensitization and chronic beryllium disease (CBD). To better understand the dissolution of beryllium materials associated with elevated prevalence of sensitization and CBD, single-constituent (beryllium oxide (BeO) particles sampled from a screener operation, finished product BeO powder, finish product beryllium metal powder) and multi-constituent (particles sampled from an arc furnace during processing of copper-beryllium alloy) aerosol materials were studied. Dissolution rates were measured using phagolysosomal simulant fluid (PSF) in a static dissolution technique and then normalized to measured values of specific surface area to calculate a chemical dissolution rate constant (k) for each material. Values of k, in g/(cm2 day), for screener BeO particles (1.3 +/- 1.9 x 10(-8)) and for BeO powder (1.1 +/- 0.5 x 10(-8)) were similar (p = 0.45). The value of k observed for beryllium metal powder (1.1 +/- 1.4 x 10(-7)) was significantly greater than observed for the BeO materials (p < 0.0003). For arc furnace particles, k (1.6 +/- 0.6 x 10(-7)) was significantly greater than observed for the BeO materials (p < 0.00001), despite the fact that the chemical form of beryllium in the aerosol was BeO. These results suggest that dissolution of beryllium differs among physicochemical forms of beryllium and direct measurement of dissolution is needed for multi-constituent aerosol. Additional studies of the dissolution behavior of beryllium materials in a variety of mixture configurations will aid in developing exposure-response models to improve understanding of the risk of beryllium sensitization and CBD.

Bioavailability of beryllium oxide particles: an in vitro study in the murine J774A.1 macrophage cell line model

Beryllium metal and its oxide and alloys are materials of industrial significance with recognized adverse effects on worker health. Currently, the degree of risk associated with exposure to these materials in the workplace is assessed through measurement of beryllium aerosol mass concentration. Compliance with the current mass-based occupational exposure limit has proven ineffective at eliminating the occurrence of chronic beryllium disease (CBD). The rationale for this research was to examine the mechanism of beryllium bioavailability, which may be pertinent to risk. The authors tested the hypothesis in vitro that dissolution of particles engulfed by macrophages is greater than dissolution in cellular medium alone. Physicochemical changes were evaluated in vitro for well-characterized high-purity beryllium oxide (BeO) particles in cell-free media alone and engulfed by and retained within murine J774A.1 monocyte-macrophage cells. The BeO particles were from a commercially available powder and consisted of diffuse clusters (aerodynamic diameter range 1.5 to 2.5 microm) of 200-nm diameter primary particles. Following incubation for 124 to 144 hours, particles were recovered and recharacterized. Recovered particles were similar in morphology, chemical composition, and size relative to the original material, confirming the relatively insoluble nature of the BeO particles. Measurable levels of dissolved beryllium, representing 0.3% to 4.8% of the estimated total beryllium mass added, were measured in the recovered intracellular fluid. Dissolved beryllium was not detected in the extracellular media. The BeO chemical dissolution rate constant in the J774A. 1 cells was 2.1 +/- 1.7 x 10(-8)g/(cm2 . day). In contrast, the BeO chemical dissolution rate constant in cell-free media was < 8.1 x 10(-9)g/(cm2 . day). In vivo, beryllium dissolved by macrophages may be released in the pulmonary alveolar environment, in the lymphatic system after transport of beryllium by macrophages, or in the alveolar interstitium after migration and dissolution of beryllium particles in tissue. These findings demonstrate a mechanism of bioavailability for beryllium, are consistent with previously observed results in canine alveolar macrophages, and provide insights into additional research needs to understand and prevent beryllium sensitization and CBD.

Characterization of phagolysosomal simulant fluid for study of beryllium aerosol particle dissolution

A simulant of phagolysosomal fluid is needed for beryllium particle dissolution research because intraphagolysosomal dissolution is believed to be a necessary step in the cellular immune response associated with development of chronic beryllium disease. Thus, we refined and characterized a potassium hydrogen phthalate (KHP) buffered solution with pH 4.55, termed phagolysosomal simulant fluid (PSF), for use in a static dissolution technique. To characterize the simulant, beryllium dissolution in PSF was compared to dissolution in the J774A.1 murine cell line. The effects of ionic composition, buffer strength, and the presence of the antifungal agent alkylbenzyldimethylammonium chloride (ABDC) on beryllium dissolution in PSF were evaluated. Beryllium dissolution in PSF was not different from dissolution in the J774A.1 murine cell line (p = 0.78) or from dissolution in another simulant having the same pH but different ionic composition (p = 0.73). A buffer concentration of 0.01-M KHP did not appear adequate to maintain pH under all conditions. There was no difference between dissolution in PSF with 0.01-M KHP and 0.02-M KHP (p = 0.12). At 0.04-M KHP, beryllium dissolution was increased relative to 0.02-M KHP (p = 0.02). Use of a 0.02-M KHP buffer concentration in the standard formulation for PSF provided stability in pH without alteration of the dissolution rate. The presence of ABDC did not influence beryllium dissolution in PSF (p = 0.35). PSF appears to be a useful and appropriate model of in vitro beryllium dissolution when using a static dissolution technique. In addition, the critical approach used to evaluate and adjust the composition of PSF may serve as a framework for characterizing PSF to study dissolution of other metal and oxide particles.

Characterization of plutonium aerosol collected during an accident

This study determined the plutonium particle size distribution and dissolution rate of PuO2 aerosol collected during the 16 March 2000 release of an undetermined amount of PuO2 in a room within a plutonium facility at Los Alamos National Laboratory. The facility has been in operation since 1978 to support the development, fabrication, and testing of Pu heat sources for the U.S. Department of Energy. Several workers were in the room at the time of the release and in vivo study of five of the workers began the day after the exposure event. Four of the subjects subsequently received chelation therapy. Over 30 fixed air filter samplers (FASs) and four continuous air monitors (CAMs) were operating in the room during the radiological release. One 47-mm-diameter glass fiber FAS filter and one 25-cm-diameter mixed cellulose ester CAM filter containing Pu aerosol from the incident were examined in the study described here. Total alpha radioactivity on the filters was determined by gross alpha counting. Isotopic identification of the Pu was made by alpha spectrometry. Film autoradiography was used to characterize the spatial distribution of alpha-emitting particles on the filters. Track-etch autoradiography was used to estimate the distribution of alpha radioactivity in individual plutonium particles on the filters for particle size measurement. The glass fiber filter was then cut into six sections. Particles from two sections were resuspended in alcohol, dispersed as an aerosol using a Lovelace nebulizer, and characterized by aerodynamic diameter using a Lovelace Multi-jet cascade impactor. The measured activity median aerodynamic diameter from the cascade impactor was 4.8 mum with a geometric standard deviation of 1.5. That agreed with the size distribution obtained from the alpha track detection technique. The remaining four filter sections were used in an in vitro dissolution study with synthetic serum ultrafiltrate. The retention of undissolved Pu was consistent with a biphasic exponential function. The majority of the Pu dissolved with a half-time of 900 d. The information on particle size distribution and solubility from this study was useful in assigning a radiation dose to the exposed workers, supporting the decision to administer chelation therapy, and providing a model for characterizing accident-associated aerosols in the future.

Characterization of physicochemical properties of beryllium aerosols associated with prevalence of chronic beryllium disease

Little is known about the physicochemical properties of beryllium aerosols associated with increased risk of beryllium sensitization and chronic beryllium disease (CBD). Such information is needed to evaluate whether airborne mass of beryllium is the appropriate metric of exposure or alternatively to provide a scientific basis for using information on particle size, surface area, and chemistry to support an improved exposure limit based on bioavailability through the inhalation and dermal routes of exposure. Thus, we used a suite of analytical techniques to characterize aerodynamically size-fractionated beryllium particles and powders that have been associated in epidemiological studies with higher prevalence of CBD. Aerosol particles were sampled from the ventilation systems of production lines for powders of beryllium metal and beryllium oxide and for ingots of copper-beryllium alloy. End product powders from the metal and oxide production lines were also collected. Particles released during production of beryllium metal were found to be complex, having heterogeneous composition, including reactive species such as fluorine. Powders from beryllium metal production were of high purity with only a minor component of beryllium oxide. Both particles and powders from oxide production were high-purity oxide. Particles released during production of copper-beryllium alloy were heterogeneous, being predominantly copper oxides. Thus, all particles and powders contain at least some beryllium in the form of beryllium oxide. These data justify efforts to thoroughly characterize beryllium aerosol properties when performing exposure assessments. The data also suggest that differences in particle chemical composition, size, number, and surface area may influence bioavailability of beryllium and contribute to risk of CBD. However, a scientific basis does not yet exist to replace mass as the current metric of exposure.

Efficacy of a technique for exposing the mouse lung to particles aspirated from the pharynx

Recent studies have demonstrated that the mouse lung can be exposed to soluble antigens by aspiration of these antigens from the pharynx. This simple technique avoids the trauma associated with intratracheal instillation. In this study, the pharyngeal aspiration technique was validated for exposing the mouse lung to respirable particles. Using respirable fluorescent amine-modified polystyrene latex beads and beryllium oxide particles, we investigated the localization of aspirated particles within the lung and the relationship between the amount of material placed in the pharynx and the amount deposited in the lung. For exposure, mice were anesthetized with isoflurane in a bell jar, placed on a slant board, and the tongue was gently held in full extension while a 50-microl suspension of particles was pipetted onto the base of the tongue. Tongue restraint was maintained until at least two breaths were completed. Less than a minute after exposure, all mice awoke from anesthesia without visible sequela. There were no significant differences in particle distribution between the left and right side of the lung (p=.16). Particles were widely disseminated in a peribronchiolar pattern within the alveolar region. There was a linear and significant correlation (r2=.99) between the amount administered and the amount deposited in the lung. In beryllium-exposed mice, measurable lung beryllium was 77.5 to 88.2% of the administered beryllium. These findings demonstrate that following aspiration of pharyngeal deposited particles, exposures to the deep lung are repeatable, technically simple, and highly correlated to the administered dose.

Surface area of respirable beryllium metal, oxide, and copper alloy aerosols and implications for assessment of exposure risk of chronic beryllium disease

The continued occurrence of chronic beryllium disease (CBD) suggests the current occupational exposure limit of 2 microg beryllium per cubic meter of air does not adequately protect workers. This study examined the morphology and measured the particle surface area of aerodynamically size-separated powders and process-sampled particles of beryllium metal, beryllium oxide, and copper-beryllium alloy. The beryllium metal powder consisted of compact particles, whereas the beryllium oxide powder and particles were clusters of smaller primary particles. Specific surface area (SSA) results for all samples (N=30) varied by a factor of 37, from 0.56 +/- 0.07 m(2)/g (for the 0.4-0.7 microm size fraction of the process-sampled reduction furnace particles) to 20.8 +/- 0.4 m(2)/g (for the </=0.4 microm size fraction of the metal powder). Large relative differences in SSA were observed as a function of particle size for the powder of beryllium metal, from 4.0 +/- 0.01 m(2)/g (for the particle size fraction >6 microm) to 20.8 +/- 0.44 m(2)/g (for the particle size fraction </=0.4 microm). In contrast, little relative difference in SSA (<25%) was observed as a function of particle size for the beryllium oxide powder and particles collected from the screening operation. The SSA of beryllium metal powder decreases with increasing particle size, as expected for compact particles, and the SSA of the beryllium oxide powders and particles remains constant as a function of particle size, which might be expected for clustered particles. These associations illustrate how process-related factors can influence the morphology and SSA of beryllium materials. To avoid errors in predicting bioavailability of beryllium and the associated risks for CBD, the mechanisms of particle formation should be understood and the SSA of beryllium particles should be measured directly.

Effects of aerosolized dust in goats on lung clearance of Pasteurella and Mannheimia species

The objective was to determine whether the inhalation of large quantities of feedyard dust predisposed the animals to pulmonary bacterial proliferation. Two control groups, C1 and C2, did not receive dust treatments, and two principal groups (P1 and P2) received a total of 14 dust treatments each. The C1 and P1 groups of goats each received a transthoracic challenge of live Mannheimia haemolytica (4 x 10(6) colony forming units, CFU) The C2 and P2 groups of goats each received a transthoracic challenge of live Pasteurella multocida (1.0 x 10(6) CFU/goat). The results showed that dusted animals had fever when compared with non-dusted controls. In addition, dusted animals demonstrated a leukocytosis with neutrophilia after the first dust treatment that was not sustainable. Finally, dusted animals demonstrated pulmonary clearance of two potential bacterial pathogens that was not significantly different from that shown by control (not dusted) animals.

Implanted depleted uranium fragments cause soft tissue sarcomas in the muscles of rats

In this study, we determined the carcinogenicity of depleted uranium (DU) metal fragments containing 0.75% titanium in muscle tissues of rats. The results have important implications for the medical management of Gulf War veterans who were wounded with DU fragments and who retain fragments in their soft tissues. We compared the tissue reactions in rats to the carcinogenicity of a tantalum metal (Ta), as a negative foreign-body control, and to a colloidal suspension of radioactive thorium dioxide ((232)Th), Thorotrast, as a positive radioactive control. DU was surgically implanted in the thigh muscles of male Wistar rats as four squares (2.5 x 2.5 x 1.5 mm or 5.0 x 5.0 x 1.5 mm) or four pellets (2.0 x 1.0 mm diameter) per rat. Ta was similarly implanted as four squares (5.0 x 5.0 x 1.1 mm) per rat. Thorotrast was injected at two sites in the thigh muscles of each rat. Control rats had only a surgical implantation procedure. Each treatment group included 50 rats. A connective tissue capsule formed around the metal implants, but not around the Thorotrast. Radiographs demonstrated corrosion of the DU implants shortly after implantation. At later times, rarifactions in the radiographic profiles correlated with proliferative tissue responses. After lifetime observation, the incidence of soft tissue sarcomas increased significantly around the 5.0 x 5.0 mm squares of DU and the positive control, Thorotrast. A slightly increased incidence occurred in rats implanted with the 2.5 x 2.5 mm DU squares and with 5.0 x 5.0 mm squares of Ta. No tumors were seen in rats with 2.0 x 1.0 mm diameter DU pellets or in the surgical controls. These results indicate that DU fragments of sufficient size cause localized proliferative reactions and soft tissue sarcomas that can be detected with radiography in the muscles of rats.