Keratin Biomembranes as a Model for Studying Onychomycosis

Difficulties in obtaining human nails that are large enough for examining the penetration of drug formulations led us to produce keratin films regenerated from human hair. We assume that these films can simulate human nail plates in drug penetration and permeation tests and can serve as a biological model for studying onychomycosis. The films were formed from keratin extracted from human hair using dithiothreitol, urea and thiourea. The obtained keratin extract was dispensed into Teflon rings and dried at 40 °C and then cured at 110 °C. The structure, surface morphology, chemical characterization and thermal stability of the films were characterized and were compared to those of human nail, hair and bovine hoof samples using SDS-electrophoresis, scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The structure of the obtained films was found to be closer to human nails than to hair or bovine hooves. The keratin films were infected with Trichophyton rubrum and were proven to be appropriate for serving as a model for studying onychomycosis.

Characterization of inter-crystallite peptides in human enamel rods reveals contribution by the Y allele of amelogenin

Proteins of the inter-rod sheath and peptides within the narrow inter-crystallite space of the rod structure are considered largely responsible for visco-elastic and visco-plastic properties of enamel. The present study was designed to investigate putative peptides of the inter-crystallite space. Entities of 1-6 kDa extracted from enamel rods of erupted permanent teeth were analysed by mass spectrometry (MS) and shown to comprise N-terminal amelogenin (AMEL) peptides either containing or not containing exon 4 product. Other dominant entities consisted of an N-terminal peptide from ameloblastin (AMBN) and a series of the most hydrophobic peptides from serum albumin (ALBN). Amelogenin peptides encoded by the Y-chromosome allele were strongly detected in Enamel from male teeth. Location of N-terminal AMEL peptides as well as AMBN and ALBN, between apatite crystallites, was disclosed by immunogold scanning electron microscopy (SEM). Density plots confirmed the relative abundance of these products including exon 4+ AMEL peptides that have greater capacity for binding to hydroxyapatite. Hydrophilic X and Y peptides encoded in exon 4 differ only in substitution of non-polar isoleucine in Y for polar threonine in X with reduced disruption of the hydrophobic N-terminal structure in the Y form. Despite similarity of X and Y alleles of AMEL the non-coding region upstream from exon 4 shows significant variation with implications for segregation of processing of transcripts from exon 4. Detection of fragments from multiple additional proteins including keratins (KER), fetuin A (FETUA), proteinases and proteinase inhibitors, likely reflect biochemical events during enamel formation.

Mechanics of soft epithelial keratin networks depend on modular filament assembly kinetics

Structural adaptability is a pivotal requirement of cytoskeletal structures, enabling their reorganization to meet the cellular needs. Shear stress, for instance, results in large morphological network changes of the human soft epithelial keratin pair K8:K18, and is accompanied by an increase in keratin phosphorylation levels. Yet the mechanisms responsible for the disruption of the network structure in vivo remain poorly understood. To understand the effect of the stress-related site-specific phosphorylation of the K8:K18 pair, we created phosphomimicry mutants - K8(S431E), K8(S73E), K18(S52E) - in vitro, and investigated the various steps of keratin assembly from monomer to network structure using fluorescence and electron microscopy, and using rheology characterized their network mechanical properties. We find that the addition of a charged group produces networks with depleted intra-connectivity, which translates to a mechanically weaker and more deformable network. This large variation in network structure is achieved by the formation of shorter mutant filaments, which exhibit differing assembly kinetics and a manifestly reduced capacity to form the extended structures characteristic of the wild-type system. The similarity in outcome for all the phosphomimicry mutants explored points to a more general mechanism of structural modulation of intermediate filaments via phosphorylation. Understanding the role of kinetic effects in the construction of these cytoskeletal biopolymer networks is critical to elucidating their structure-function properties, providing new insight for the design of keratin-inspired biomaterials.

STATEMENT OF SIGNIFICANCE

Structural remodeling of cytoskeletal networks accompanies many cellular processes. Interestingly, levels of phosphorylation of the human soft epithelial keratin pair K8:K18 increase during their stress-related structural remodeling. Our multi-scale study sheds light on the poorly understood mechanism with which site-specific phosphorylation induces disruption of the keratin network structure in vivo. We show how phosphorylation reduces keratin filament length, an effect that propagates through to the mesoscopic structure, resulting in the formation of connectivity-depleted and mechanically weaker networks. We determine that the intrinsically-set filament-to-filament attractions that drive bundle assembly give rise to the structural variability by enabling the formation of kinetically-arrested structures. Overall, our results shed light on how self-assembled intermediate filament structures can be tailored to exhibit different structural functionalities.

Comparative Study of Ultrasonication-Induced and Naturally Self-Assembled Silk Fibroin-Wool Keratin Hydrogel Biomaterials

This study reports the formation of biocompatible hydrogels using protein polymers from natural silk cocoon fibroins and sheep wool keratins. Silk fibroin protein contains β-sheet secondary structures, allowing for the formation of physical cross-linkers in the hydrogels. Comparative studies were performed on two groups of samples. In the first group, ultrasonication was used to induce a quick gelation of a protein aqueous solution, enhancing the ability of Bombyx mori silk fibroin chains to quickly entrap the wool keratin protein molecules homogenously. In the second group, silk/keratin mixtures were left at room temperature for days, resulting in naturally-assembled gelled solutions. It was found that silk/wool blended solutions can form hydrogels at different mixing ratios, with perfectly interconnected gel structure when the wool content was less than 30 weight percent (wt %) for the first group (ultrasonication), and 10 wt % for the second group (natural gel). Differential scanning calorimetry (DSC) and temperature modulated DSC (TMDSC) were used to confirm that the fibroin/keratin hydrogel system was well-blended without phase separation. Fourier transform infrared spectroscopy (FTIR) was used to investigate the secondary structures of blended protein gels. It was found that intermolecular β-sheet contents significantly increase as the system contains more silk for both groups of samples, resulting in stable crystalline cross-linkers in the blended hydrogel structures. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to analyze the samples' characteristic morphology on both micro- and nanoscales, which showed that ultrasonic waves can significantly enhance the cross-linker formation and avoid phase separation between silk and keratin molecules in the blended systems. With the ability to form cross-linkages non-chemically, these silk/wool hydrogels may be economically useful for various biomedical applications, thanks to the good biocompatibility of protein molecules and the various characteristics of hydrogel systems.

X-rays Reveal the Internal Structure of Keratin Bundles in Whole Cells

In recent years, X-ray imaging of biological cells has emerged as a complementary alternative to fluorescence and electron microscopy. Different techniques were established and successfully applied to macromolecular assemblies and structures in cells. However, while the resolution is reaching the nanometer scale, the dose is increasing. It is essential to develop strategies to overcome or reduce radiation damage. Here we approach this intrinsic problem by combing two different X-ray techniques, namely ptychography and nanodiffraction, in one experiment and on the same sample. We acquire low dose ptychography overview images of whole cells at a resolution of 65 nm. We subsequently record high-resolution nanodiffraction data from regions of interest. By comparing images from the two modalities, we can exclude strong effects of radiation damage on the specimen. From the diffraction data we retrieve quantitative structural information from intracellular bundles of keratin intermediate filaments such as a filament radius of 5 nm, hexagonal geometric arrangement with an interfilament distance of 14 nm and bundle diameters on the order of 70 nm. Thus, we present an appealing combined approach to answer a broad range of questions in soft-matter physics, biophysics and biology.

Biological armors under impact--effect of keratin coating, and synthetic bio-inspired analogues

A number of biological armors, such as turtle shells, consist of a strong exoskeleton covered with a thin keratin coating. The mechanical role upon impact of this keratin coating has surprisingly not been investigated thus far. Low-velocity impact tests on the turtle shell reveal a unique toughening phenomenon attributed to the thin covering keratin layer, the presence of which noticeably improves the fracture energy and shell integrity. Synthetic substrate/coating analogues were subsequently prepared and exhibit an impact behavior similar to the biological ones. The results of the present study may improve our understanding, and even future designs, of impact-tolerant structures.

Mechanics of individual keratin bundles in living cells

Along with microtubules and microfilaments, intermediate filaments are a major component of the eukaryotic cytoskeleton and play a key role in cell mechanics. In cells, keratin intermediate filaments form networks of bundles that are sparser in structure and have lower connectivity than, for example, actin networks. Because of this, bending and buckling play an important role in these networks. Buckling events, which occur due to compressive intracellular forces and cross-talk between the keratin network and other cytoskeletal components, are measured here in situ. By applying a mechanical model for the bundled filaments, we can access the mechanical properties of both the keratin bundles themselves and the surrounding cytosol. Bundling is characterized by a coupling parameter that describes the strength of the linkage between the individual filaments within a bundle. Our findings suggest that coupling between the filaments is mostly complete, although it becomes weaker for thicker bundles, with some relative movement allowed.

Localization of human hair structural lipids using nanoscale infrared spectroscopy and imaging

Atomic force microscopy (AFM) and infrared (IR) spectroscopy have been combined in a single instrument (AFM-IR) capable of producing IR spectra and absorption images at a sub-micrometer spatial resolution. This new device enables human hair to be spectroscopically characterized at levels not previously possible. In particular, it was possible to determine the location of structural lipids in the cuticle and cortex of hair. Samples of human hair were embedded, cross-sectioned, and mounted on ZnSe prisms. A tunable IR laser generating pulses of the order of 10 ns was used to excite sample films. Short duration thermomechanical waves, due to infrared absorption and resulting thermal expansion, were studied by monitoring the resulting excitation of the contact resonance modes of the AFM cantilever. Differences are observed in the IR absorbance intensity of long-chain methylene-containing functional groups between the outer cuticle, middle cortex, and inner medulla of the hair. An accumulation of structural lipids is clearly observed at the individual cuticle layer boundaries. This method should prove useful in the future for understanding the penetration mechanism of substances into hair as well as elucidating the chemical nature of alteration or possible damage according to depth and hair morphology.

Interspecies comparison of morphology, ultrastructure, and proteome of mammalian keratin fibers of similar diameter

Sheep wool has traditionally been viewed as the representative mammalian keratin fiber for the purposes of describing morphology and protein composition. We have investigated narrow fibers from the under-hairs of a range of species both closely and distantly related to sheep, comparing structure and protein composition. Within this group, curvature was negatively correlated with diameter for all but mohair. The cortical cell types present in alpaca, rabbit, and mohair fibers differed structurally from wool, primarily in terms of their macrofibril architecture. Except for rabbit, each species' fibers contained three cell types, and except for mohair, cell types were distributed asymmetrically across the cortex. In mohair, the cell types were distributed annularly, and each cell type had regions in which intermediate filaments were packed into highly aligned hexagonal mosaics, much like the mesocortex in wool. Coupled with this, were differences in the protein profiles; the rabbit fiber contained extra keratins and keratin associated proteins, while only subtle differences were noted between mohair and Merino fibers. In both rabbit and mohair fibers, the relative abundance of keratin K85 was lower than that of Merino. These results suggest that there may be links between relative protein composition and fiber morphology, albeit complex ones.

Plasma treatment induced wetting transitions on biological tissue (pigeon feathers)

We report first the wetting transition from superhydrophobicity to superhydrophilicity observed on nitrogen and air plasma irradiated biological tissue (pigeon feathers). Non-irradiated feathers demonstrate pronounced Cassie-Baxter ("fakir") wetting characterized by high apparent contact angles and low sliding angles. Plasma-irradiated feathers are superhydrophilic. Plasma treatment does not affect the barbs/barbules keratin-built network constituting pigeon pennae, but it changes the Young, advancing and receding angles of the tissue. The mechanism of wetting transition is discussed.

Refractive index and dispersion of butterfly chitin and bird keratin measured by polarizing interference microscopy

Using Jamin-Lebedeff interference microscopy, we measured the wavelength dependence of the refractive index of butterfly wing scales and bird feathers. The refractive index values of the glass scales of the butterfly Graphium sarpedon are, at wavelengths 400, 500 and 600 nm, 1.572, 1.552 and 1.541, and those of the feather barbules of the white goose Anas anas domestica are 1.569, 1.556 and 1.548, respectively. The dispersion spectra of the chitin in the butterfly scales and the keratin in the bird barbules are well described by the Cauchy equation n(λ) = A + B/λ(2), with A = 1.517 and B = 8.80·10(3) nm(2) for the butterfly chitin and A = 1.532 and B = 5.89·10(3) nm(2) for the bird keratin.

Preparation and characterization of hair keratin/gelatin blend films

Abstract: Keratin solution was extracted from human hairs and used as subject for preparation of keratin/gelatin blend films. This study was aimed to explore the suitable method using for keratin extraction and extend to study the blend film properties. The blend films were prepared by simple evaporation method. After homogeneously mixed between keratin and gelatin solution at different ratios, the solution were placed on the plates and left in an oven at 40 degrees C for 3 days. All of the films were then analyzed for their morphology, secondary structures and thermal properties by using SEM, FTIR and TGA, respectively. The result from SEM images showed that native keratin films have the highest rough surface compared to other films. In addition, the smooth surface of films gradually increased when the gelatin content increased. Keratin blending with gelatin showed structural changes, especially at the absorption bands of 3300-2900 cm(-1) as well as the amide I, II and III regions. Moreover, thermal properties of the keratin films were enhanced by blending with gelatin. This study suggested that gelatin help to improve some properties of keratin while still remain its strength.

A case of Leukonychia with scanning electron microscope observation

Leukonychia is a medical term for white discoloration appearing on nails. The pathophysiologic mechanisms that cause white discoloration are not entirely clear. We processed a case of leukonychia with scanning electron microscope observation and found many crispy, obviously dissociated "layers" in the lower part of the white nail plate. The dissociated "layers" were composed of thick, loose, coarse keratin bundles intertwined with each other. We believe the dissociated "layers" are related to the clinically noted white discoloration appearing on the nails.

Novel electron tomographic methods to study the morphology of keratin filament networks

The three-dimensional (3D) keratin filament network of pancreatic carcinoma cells was investigated with different electron microscopical approaches. Semithin sections of high-pressure frozen and freeze substituted cells were analyzed with scanning transmission electron microscope (STEM) tomography. Preservation of subcellular structures was excellent, and keratin filaments could be observed; however, it was impossible to three-dimensionally track the individual filaments. To obtain a better signal-to-noise ratio in transmission mode, we observed ultrathin sections of high-pressure frozen and freeze substituted samples with low-voltage (30 kV) STEM. Contrast was improved compared to 300 kV, and individual filaments could be observed. The filament network of samples prepared by detergent extraction was imaged by high-resolution scanning electron microscopy (SEM) with very good signal-to-noise ratio using the secondary electron signal and the 3D structure could be elucidated by SEM tomography. In freeze-dried samples it was possible to discern between keratin filaments and actin filaments because the helical arrangement of actin subunits in the F-actin could be resolved. When comparing the network structures of the differently prepared samples, we found no obvious differences in filament length and branching, indicating that the intermediate filament network is less susceptible to preparation artifacts than the actin network.

Biomaterials from wool wastes: characterization of cortical cells/chitosan composite

Anisotropic cortical cells were extracted from waste wool fibres by formic acid-ultrasonic treatment and successively included in different proportions in a chitosan matrix to make film-forming composites, suitable for film casting and filament spinning. The morphological, chemical, thermal and mechanical properties of the composite film were investigated by scanning electron microscopy (SEM), light microscopy, X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, differential scanning calorimetric (DSC) and tensile tests, respectively. The cortical cells/chitosan composite is capable of forming translucent composite films with acceptable mechanical and thermal properties. The chitosan composite film with addition of 30 wt.% cortical cells showed values of 29.6 +/- 2.9 MPa for ultimate strength, 5.6 +/- 0.3% for ultimate elongation and 35.3 +/- 1.4 MPa for Young's modulus, all higher than that of the pure chitosan film. DSC results revealed that the decomposition temperature of the composite film shifted to a higher temperature compared to the base materials, by increasing the mass fraction of cortical cells. XRD patterns showed that the crystallinity of biocomposite films increased with the addition of cortical cells. In addition, the FT-IR spectra of the composite film indicated that no chemical reaction occurs between cortical cells and chitosan; only a physical mixture of its constituents was present.

The cell membrane complex: three related but different cellular cohesion components of mammalian hair fibers

The structure, chemistry and physical properties of the cell membrane complex (CMC) of keratin fibers are reviewed, highlighting differences in the three types of CMC. Starting with Rogers' initial description of the CMC in animal hairs, several important developments have occurred that will be described, adding new details to this important structure in mammalian hair fibers. These developments show that essentially all of the covalently bound fatty acids of the beta layers are in the cuticle and exist as monolayers. The beta layers of the cortex are bilayers that are not covalently bonded but are attached by ionic and polar linkages on one side to the cortical cell membranes and on the other side to the delta layer. The delta layer between cortical cells consists of five sublayers; its proteins are clearly different from the delta layer that exists between cuticle cells. The cell membranes of cuticle cells are also markedly different from the cell membranes of cortical cells. Models with supporting evidence are presented for the three different types of cell membrane complex: cuticle-cuticle CMC, cuticle-cortex CMC, and cortex-cortex CMC.

Characterization of the structure and composition of gecko adhesive setae

The ability of certain reptiles to adhere to vertical (and hang from horizontal) surfaces has been attributed to the presence of specialized adhesive setae on their feet. Structural and compositional studies of such adhesive setae will contribute significantly towards the design of biomimetic fibrillar adhesive materials. The results of electron microscopy analyses of the structure of such setae are presented, indicating their formation from aggregates of proteinaceous fibrils held together by a matrix and potentially surrounded by a limiting proteinaceous sheath. Microbeam X-ray diffraction analysis has shown conclusively that the only ordered protein constituent in these structures exhibits a diffraction pattern characteristic of beta-keratin. Raman microscopy of individual setae, however, clearly shows the presence of additional protein constituents, some of which may be identified as alpha-keratins. Electrophoretic analysis of solubilized setal proteins supports these conclusions, indicating the presence of a group of low-molecular-weight beta-keratins (14-20 kDa), together with alpha-keratins, and this interpretation is supported by immunological analyses.

The structure of acquired aural cholesteatoma as revealed by scanning electron microscopy

The structural features of cells, their surfaces and the extracellular matrix were investigated in acquired aural cholesteatoma. Cholesteatomas surgically removed from 30 patients were examined by a scanning electron microscope (SEM). The predominant part of a cholesteatoma was composed of stratified squamous epithelium, showing extensive chaotic desquamation. The surface sculpture of the keratinocytes and corneocytes varied from parallel ridges, irregular microplicae and mirovilli, to flat grooves and pits and a completely smooth surface. Sheetlike lamellar structures, probably representing an intercellular lipid-forming permeability barrier, were also observed. Small crystals located in the perimatrix were observed in one case. According to the SEM observations, cholesteatoma epithelium is characterised by abnormal and uncoordinated keratinisation, with a predominance of the advanced stages of the process.

Characterization of keratins and associated proteins involved in the corneification of crocodilian epidermis

Crocodilian keratinocytes accumulate keratin and form a corneous cell envelope of which the composition is poorly known. The present immunological study characterizes the molecular weight, isoelectric point (pI) and the protein pattern of alpha- and beta-keratins in the epidermis of crocodilians. Some acidic alpha-keratins of 47-68 kDa are present. Cross-reactive bands for loricrin (70, 66, 55 kDa), sciellin (66, 55-57 kDa), and filaggrin-AE2-positive keratins (67, 55 kDa) are detected while caveolin is absent. These proteins may participate in the formation of the cornified cell membranes, especially in hinge regions among scales. Beta-keratins of 17-20 kDa and of prevalent basic pI (7.0-8.4) are also present. Acidic beta-keratins of 10-16 kDa are scarce and may represent altered forms of the original basic proteins. Crocodilian beta-keratins are not recognized by a lizard beta-keratin antibody (A68B), and by a turtle beta-keratin antibody (A685). This result indicates that these antibodies recognize specific epitopes in different reptiles. Conversely, crocodilian beta-keratins cross-react with the Beta-universal antibody indicating they share a specific 20 amino acid epitope with avian beta-keratins. Although crocodilian beta-keratins are larger proteins than those present in birds our results indicate presence of shared epitopes between avian and crocodilian beta-keratins which give good indication for the future determination of the sequence of these proteins.

A role for tissue transglutaminase in stabilization of membrane-cytoskeletal particles shed from the human placenta

Tissue transglutaminase (TGM2; also known as TG2 or tTG) localizes to the syncytial microvillous membrane (MVM) of the human placenta, the primary interface between maternal and fetal tissue. To identify TGM2 substrates in the MVM, membrane vesicles were prepared and labeled with biotinylated acyl donor or acceptor probes. Biotinylated species were selected on an avidin affinity matrix and identified by mass spectrometry of tryptic peptides. The most abundant were cytoskeletal (actin, tubulin, and cytokeratin) and membrane-associated (annexins, integrins, and placental alkaline phosphatase) proteins. During pregnancy, apoptotic particulate material, the end product of the trophoblast life cycle, is shed from the MVM into maternal circulation. Shed material was isolated from primary trophoblast cultures in which syncytial-like masses develop by fusion. A substantial fraction of actin in the particles was in the form of covalent polymeric aggregates, in contrast to cellular actin, which dissociated completely into monomer in SDS-PAGE. When cells were cultured in the presence of transglutaminase inhibitors, actin in the shed particles remained exclusively in monomeric form, and a reduction in trophoblast intercellular fusion and differentiation was observed. These findings suggest that transglutaminase-mediated cross-linking stabilizes the particulate material shed from the placenta.

Structural analysis of vimentin and keratin intermediate filaments by cryo-electron tomography

Intermediate filaments are a large and structurally diverse group of cellular filaments that are classified into five different groups. They are referred to as intermediate filaments (IFs) because they are intermediate in diameter between the two other cytoskeletal filament systems that is filamentous actin and microtubules. The basic building block of IFs is a predominantly alpha-helical rod with variable length globular N- and C-terminal domains. On the ultra-structural level there are two major differences between IFs and microtubules or actin filaments: IFs are non-polar, and they do not exhibit large globular domains. IF molecules associate via a coiled-coil interaction into dimers and higher oligomers. Structural investigations into the molecular building plan of IFs have been performed with a variety of biophysical and imaging methods such as negative staining and metal-shadowing electron microscopy (EM), mass determination by scanning transmission EM, X-ray crystallography on fragments of the IF stalk and low-angle X-ray scattering. The actual packing of IF dimers into a long filament varies between the different families. Typically the dimers form so called protofibrils that further assemble into a filament. Here we introduce new cryo-imaging methods for structural investigations of IFs in vitro and in vivo, i.e., cryo-electron microscopy and cryo-electron tomography, as well as associated techniques such as the preparation and handling of vitrified sections of cellular specimens.

p38 MAPK-dependent shaping of the keratin cytoskeleton in cultured cells

Plasticity of the resilient keratin intermediate filament cytoskeleton is an important prerequisite for epithelial tissue homeostasis. Here, the contribution of stress-activated p38 MAPK to keratin network organization was examined in cultured cells. It was observed that phosphorylated p38 colocalized with keratin granules that were rapidly formed in response to orthovanadate. The same p38^p recruitment was noted during mitosis, in various stress situations and in cells producing mutant keratins. In all these situations keratin 8 became phosphorylated on S73, a well-known p38 target site. To demonstrate that p38-dependent keratin phosphorylation determines keratin organization, p38 activity was pharmacologically and genetically modulated: up-regulation induced keratin granule formation, whereas down-regulation prevented keratin filament network disassembly. Furthermore, transient p38 inhibition also inhibited keratin filament precursor formation and mutant keratin granule dissolution. Collectively, the rapid and reversible effects of p38 activity on keratin phosphorylation and organization in diverse physiological, stress, and pathological situations identify p38-dependent signalling as a major intermediate filament–regulating pathway.

Intermediate filaments: a role in epithelial polarity

Intermediate filaments have long been considered mechanical components of the cell that provide resistance to deformation stress. Practical experimental problems, including insolubility, lack of good pharmacological antagonists, and the paucity of powerful genetic models have handicapped the research of other functions. In single-layered epithelial cells, keratin intermediate filaments are cortical, either apically polarized or apico-lateral. This review analyzes phenotypes of genetic manipulations of simple epithelial cell keratins in mice and Caenorhabditis elegans that strongly suggest a role of keratins in apico-basal polarization and membrane traffic. Published evidence that intermediate filaments can act as scaffolds for proteins involved in membrane traffic and signaling is also discussed. Such a scaffolding function would generate a highly polarized compartment within the cytoplasm of simple epithelial cells. While in most cases mechanistic explanations for the keratin-null or overexpression phenotypes are still missing, it is hoped that investigators will be encouraged to study these as yet poorly understood functions of intermediate filaments.

Organization of cytokeratin cytoskeleton and germ plasm in the vegetal cortex of Xenopus laevis oocytes depends on coding and non-coding RNAs: three-dimensional and ultrastructural analysis

Recent studies discovered a novel structural role of RNA in maintaining the integrity of the mitotic spindle and cellular cytoskeleton. In Xenopus laevis, non-coding Xlsirts and coding VegT RNAs play a structural role in anchoring localized RNAs, maintaining the organization of the cytokeratin cytoskeleton and germinal granules in the oocyte vegetal cortex and in subsequent development of the germline in the embryo. We studied the ultrastructural effects of antisense oligonucleotide driven ablation of Xlsirts and VegT RNAs on the organization of the cytokeratin, germ plasm and other components of the vegetal cortex. We developed a novel method to immunolabel and visualize cytokeratin at the electron microscopy level, which allowed us to reconstruct the ultrastructural organization of the cytokeratin network relative to the components of the vegetal cortex in Xenopus oocytes. The removal of Xlsirts and VegT RNAs not only disrupts the cytokeratin cytoskeleton but also has a profound transcript-specific effect on the anchoring and distribution of germ plasm islands and their germinal granules and the arrangement of yolk platelets within the vegetal cortex. We suggest that the cytokeratin cytoskeleton plays a role in anchoring of germ plasm islands within the vegetal cortex and germinal granules within the germ plasm islands.

Hair—the most sophisticated biological composite material

Hair is a proteinaceous fibre with a strongly hierarchical organization of subunits, from the alpha-keratin chains, via intermediate filaments, to the fibre. The chemistry of the different morphological compartments results in exciting physical properties, including the hydrophilic/hydrophobic paradox. The present tutorial review will be of interest for protein- as well as polymer chemists, who want to learn from nature, and also for biochemists interested in the cytoskeleton and particularly in intermediate filaments; it also presents a scientific basis for hair cosmetics.

[Preliminary study of chicken calamus conduit as a scaffold material for tissue engineering]

OBJECTIVE

To observe the unique structural features of chicken calamus keratin (CCK) conduit as a candidate scaffold material for tissue engineering and its in vivo degradation and histocompatibility after its implantation into living tissues.

METHODS

Chicken calami were taken from healthy chickens and treated through sequential, controllable physical and biochemical procedures for preparation of three types of CCK conduits, namely CCK-I (mildly treated), CCK-II (moderately treated) and CCK-III (intensely treated). Light microscopy (LM) and scanning electron microscopy (SEM) were performed for morphological observation. Each of these three types of CCK pieces (experimental group) and the untreated ones (control group) was implanted into the dorsal muscular tissue on both sides of SD rats, respectively. Routine tissue sectioning and HE stain were performed to identify the morphological changes under light microscope. Each of the CCK threads (experimental group) and the untreated chicken calamus threads (control group) was also grafted within the sciatic nerve bundles of SD rats, respectively.

RESULTS

The wall of the chicken calamus was composed of 4 compact parts from inside to outside on cross sections, namely the innermost basophilic homogenous coarse line, 3-5 layers of acidophilic corneum, 60-100 layers of circular keratin tracts containing massive pigment granules, and 10-20 outmost layers of keratin tracts with only a few pigment granules. The three-dimensional surface features of chicken calamus identified by SEM, as compared with untreated chicken calamus, was characterized by loose arrangement containing horizontal and vertical keratins with obvious pores of different sizes and depths on its surface. At 8 weeks after implantation into the muscular tissue in experimental groups, the CCK grafts were degraded into thin filaments or/and dispersed pieces and fine granules with the appearance of blood vessels, which facilitated the absorption of the degradation products; at 12 weeks, the grafts were markedly degraded into tiny fragments. In the control group, in contrast, the grafts remains intact throughout the experiment. After implantation of the material into the nerve bundles, similar cell infiltration and tissue responses to the grafts were observed as compared to those occur in intramuscular grafting. The degradation products did not seem to cause nerve tissue degeneration or necrosis.

CONCLUSIONS

Fresh chicken calamus is a natural tube composed of multi-layered compact keratin tracts with pigment granules and small amount of matrix, and is non-absorbable in vivo, and therefore does not favor the purpose for use directly as a candidate biological scaffold. After proper treatment, the chicken calamus becomes loosely arranged porous material, and can be degraded and absorbed in vivo without resulting in tissue degradation or necrosis, suggesting its potential for applications in tissue engineering.

Study on the Conversion of Wool Keratin by Steam Explosion

A wool fiber sample was submitted to chemical-free steam explosion in view of potential exploitation of keratin-based industrial and farm wastes. Fiber keratin was converted into a dark-yellow sludge that was submitted to phase separation by filtration, centrifugation, and precipitation of the soluble materials from the supernatant liquid. The resulting products, when compared with the original wool, showed the extent of disruption of the histology structure, reduction of the molecular weight to water-soluble peptides and free amino acids, and change of the structure of the remainder of the protein associated with breaking of disulfide bonds and decomposition of the high-sulfur-content protein fraction.

Induction of three-dimensional assembly and increase in apoptosis of human endothelial cells by simulated microgravity: impact of vascular endothelial growth factor

Endothelial cells play a crucial role in the pathogenesis of many diseases and are highly sensitive to low gravity conditions. Using a three-dimensional random positioning machine (clinostat) we investigated effects of simulated weightlessness on the human EA.hy926 cell line (4, 12, 24, 48 and 72 h) and addressed the impact of exposure to VEGF (10 ng/ml). Simulated microgravity resulted in an increase in extracellular matrix proteins (ECMP) and altered cytoskeletal components such as microtubules (alpha-tubulin) and intermediate filaments (cytokeratin). Within the initial 4 h, both simulated microgravity and VEGF, alone, enhanced the expression of ECMP (collagen type I, fibronectin, osteopontin, laminin) and flk-1 protein. Synergistic effects between microgravity and VEGF were not seen. After 12 h, microgravity further enhanced all proteins mentioned above. Moreover, clinorotated endothelial cells showed morphological and biochemical signs of apoptosis after 4 h, which were further increased after 72 h. VEGF significantly attenuated apoptosis as demonstrated by DAPI staining, TUNEL flow cytometry and electron microscopy. Caspase-3, Bax, Fas, and 85-kDa apoptosis-related cleavage fragments were clearly reduced by VEGF. After 72 h, most surviving endothelial cells had assembled to three-dimensional tubular structures. Simulated weightlessness induced apoptosis and increased the amount of ECMP. VEGF develops a cell-protective influence on endothelial cells exposed to simulated microgravity.

In vitro reconstruction of a three-dimensional middle ear mucosal organ and its in vivo transplantation

CONCLUSIONS

These experimental findings suggest the feasibility of artificial middle ear mucosa grafting as an effective treatment for achieving mucosal regeneration after middle ear surgery.

OBJECTIVES

Postoperative mucosal regeneration of tympanic cavity and mastoid cavity is of great importance after middle ear surgery. We reconstructed in vitro a three-dimensional middle ear mucosal organ, and assessed its feasibility for regenerative medicine of middle ear-related diseases.

MATERIALS AND METHODS

Epithelial cells and fibroblasts were isolated from the middle ear mucosa of rats and propagated by subculturing. An artificial middle ear mucosal organ was reconstructed by overlaying the middle ear epithelial cells on three-dimensional lattices of a collagen gel that had been repopulated with the fibroblasts. In addition, the artificial organ was implanted in the middle ear cavity of rats.

RESULTS

The artificial middle ear mucosa consisted of the single layer of epithelial cells, the basal membrane, and the underlying connective tissue. Electron microscopy revealed the presence of tight junctions and adherence junctions on the apical side, and adhesion complexes made of desmosomes. The reconstituted mucosa expressed genes of mucin, strongly suggesting that the artificial middle ear mucosa was capable of secreting mucus proteins. The DiI-labeled artificial middle ear mucosa implanted into the middle ear cavity was well engrafted and associated with host tissues.

Interleukin-6 promotes human epidermal keratinocyte proliferation and keratin cytoskeleton reorganization in culture

We have studied the effects of interleukin-6 (IL-6) on human epidermal keratinocytes by using serum-free culture conditions that allow the serial transfer, differentiation, and formation of well-organized multilayered epithelia. IL-6 at 2.5 ng/ml or higher concentrations promoted keratinocyte proliferation, with an ED(50) of about 15 ng/ml and a maximum effect at 50 ng/ml. IL-6 was 10-fold less potent than epidermal growth factor (EGF) or transforming growth factor-alpha (TGF-alpha) and supported keratinocyte growth for up to eight cumulative cell generations. IL-6-treated keratinocytes formed highly stratified colonies with a narrower proliferative/migratory rim than those keratinocytes stimulated with EGF or TGF-alpha; confluent epithelial sheets treated with IL-6 also underwent an increase in the number of cell layers. We also examined the effect of IL-6 on the keratin cytoskeleton. Immunostaining with anti-K16 monoclonal antibodies showed that the keratin network was aggregated and reorganized around cell nucleus and that this was not attributable to changes in keratin levels. This is the first report concerning the induction of the reorganization of keratin intermediate filaments by IL-6 in human epidermal keratinocytes.

Iridescent plumage in satin bowerbirds: structure, mechanisms and nanostructural predictors of individual variation in colour

Iridescence is produced by coherent scattering of light waves from alternating layers of materials of different refractive indices. In birds,iridescent colours are produced by feather barbules when light is scattered from alternating layers of keratin, melanin and air. The structure and organization of these layers, and hence the appearance of bird species with different types of plumage iridescence, varies extensively. One principal distinction between different types of iridescent colours is whether they are produced by a single pair of layers or by multiple pairs of layers. Multi-layer iridescence, such as that displayed by hummingbirds, has been relatively well characterized, but single-layer iridescence has only recently been modeled successfully. Here we use electron microscopy, spectrometry and thin-film optical modeling to investigate the glossy, ultraviolet-blue iridescent plumage colouration of adult male satin bowerbirds Ptilonorhynchus violaceus minor. The flattened barbules of adult males are composed of a superficial keratin layer overlying a melanin layer that is several granules thick. A thin-film model based on the thickness of the keratin layer and its two associated interfaces (air/keratin and keratin/melanin) generates predicted reflectance spectra that closely match measured spectra. In addition, hues predicted from this model are positively correlated with measured hues. As predicted from our thin-film model, measured hues shifted to shorter wavelengths at increasing angles of incidence and reflectance. Moreover, we found that individual variation in barbule nanostructure can predict measured variation in both hue and UV-chroma. Thus,we have characterized the microstructure of satin bowerbird barbules,uncovered the mechanisms responsible for producing ultraviolet iridescence in these barbules, and provided the first evidence of a nanostructural basis for individual variation in iridescent plumage colour.

In vivo formation steps of the hard alpha-keratin intermediate filament along a hair follicle: evidence for structural polymorphism

Several aspects of the intermediate filaments' molecular architecture remain mysterious despite decades of study. The growth process and the final architecture may depend on the physical, chemical, and biochemical environment. Aiming at clarifying this issue, we have revisited the structure of the human hair follicle by means of X-ray microdiffraction. We conclude that the histology-based growth zones along the follicle are correlated to the fine architecture of the filaments deduced from X-ray microdiffraction. Our analysis reveals the existence of two major polymorph intermediate filament architectures. Just above the bulb, the filaments are characterized by a diameter of 100 Angstroms and a low-density core. The following zone upwards is characterized by the lateral aggregation of the filaments into a compact network of filaments, by a contraction of their diameter (to 75 Angstroms) and by the setting up of a long-range longitudinal ordering. In the upper zone, the small structural change associated with the tissue hardening likely concerns the terminal domains. The architecture of the intermediate filament in the upper zones could be specific to hard alpha-keratin whilst the other architecture found in the lower zone could be representative for intermediate filaments in a different environment.

Effect of formic acid exposure on keratin fiber derived from poultry feather biomass

Converting poultry feather biomass into useful products presents a new avenue of utilization of agricultural waste material. However, not much is understood about the poultry feather structure or methods to process it. In this study, formic acid vapor is systematically allowed to penetrate the feather fiber structure, which is composed of keratin. The diffusion kinetics show Fickian behavior during absorption. After very long times, i.e., greater than 10(3)h, the absorption experiments are stopped and the formic acid is allowed to desorb from the keratin material. The desorption kinetics of formic acid out of the keratin fiber do not mirror the absorption kinetics, indicating a change in the keratin microstructure. DSC and NMR spectroscopy analyses on the keratin fiber show a reduction in the area of the crystalline melting peak and solubilization of amino acids upon formic acid exposure. This indicates that the crystallinity is disrupted resulting in more amorphous fraction in the keratin polymer.

Fitting of random tessellation models to keratin filament networks

The role of specific structural patterns in keratin filament networks for regulating biophysical properties of epithelial cells is poorly understood. This is at least partially due to a lack of methods for the analysis of filament network morphology. We have previously developed a statistical approach to the analysis of keratin filament networks imaged by scanning electron microscopy. The segmentation of images in this study resulted in graph structures, i.e. tessellations, whose structural characteristics are now further investigated by iteratively fitting geometrical statistical models. An optimal model as well as corresponding optimal parameters are detected from a given set of possible random tessellation models, i.e. Poisson-Line tessellations (PLT), Poisson-Voronoi tessellations (PVT) and Poisson-Delaunay tessellations (PDT). Using this method, we investigated the remodeling of keratin filament networks in pancreatic cancer cells in response to transforming growth factor alpha (TGFalpha), which is involved in pancreatic cancer progression. The results indicate that the fitting of random tessellation models represents a suitable method for the description of complex filament networks.

Quantitative analysis of keratin filament networks in scanning electron microscopy images of cancer cells

The keratin filament network is an important part of the cytoskeleton. It is involved in the regulation of shape and viscoelasticity of epithelial cells. The morphology of keratin networks depends on post-translational modifications of keratin monomers. In-vitro studies indicated that network characteristics, such as filament crosslink density, determines the biophysical properties of the filament network. This report presents a quantitative method for the morphological analysis of keratin filament networks. Visualization of filaments was based on prefixation extraction of epithelial cells and scanning electron microscopy (SEM). SEM images were processed by a skeletonization algorithm to obtain a graph structure that represents individual filaments as well as their connections. This method was applied to investigate the effects of transforming growth factor alpha (TGFalpha) on the morphology of keratin networks in pancreatic cancer cells. TGFalpha contributes to pancreatic cancer progression and activates signalling pathways phosphorylating keratin monomers. Using this new method, a significant alteration to the keratin network morphology could be detected in response to TGFalpha.

Exploring the mechanical behavior of single intermediate filaments

Intermediate filaments (IFs) are structural elements of eukaryotic cells with distinct mechanical properties. Tissue integrity is severely impaired, in particular in skin and muscle, when IFs are either absent or malfunctioning due to mutations. Our knowledge on the mechanical properties of IFs is mainly based on tensile testing of macroscopic fibers and on the rheology of IF networks. At the single filament level, the only piece of data available is a measure of the persistence length of vimentin IFs. Here, we have employed an atomic force microscopy (AFM) based protocol to directly probe the mechanical properties of single cytoplasmic IFs when adsorbed to a solid support in physiological buffer environment. Three IF types were studied in vitro: recombinant murine desmin, recombinant human keratin K5/K14 and neurofilaments isolated from rat brains, which are composed of the neurofilament triplet proteins NF-L, NF-M and NF-H. Depending on the experimental conditions, the AFM tip was used to laterally displace or to stretch single IFs on the support they had been adsorbed to. Upon applying force, IFs were stretched on average 2.6-fold. The maximum stretching that we encountered was 3.6-fold. A large reduction of the apparent filament diameter was observed concomitantly. The observed mechanical properties therefore suggest that IFs may indeed function as mechanical shock absorbers in vivo.

Basal-like Cells Constitute the Proliferating Cell Population in Cystic Fibrosis Airways

RATIONALE

Cystic fibrosis airways are recurrently exposed to noxious stimuli, leading to epithelial injury. Previous reports suggest that cystic fibrosis airway epithelia may respond to injury by increasing proliferation.

OBJECTIVES

We sought to determine the characteristics of the proliferating cell population in cystic fibrosis airways.

METHODS

Six cystic fibrosis and six normal lung sections from lung transplant recipients or lung surgery were obtained from the Duke Hospital pathology archives. Sections containing bronchi were evaluated for epithelial cell proliferation using immunohistochemistry for a nuclear proliferation antigen, Ki-67, and image analysis; immunohistochemistry for basal cells using a cytokeratin 5/14 antibody; and immunohistochemistry for the epidermal growth factor receptor and ErbB2, two receptor tyrosine kinases implicated in epithelial proliferation and differentiation.

RESULTS

Overall, cystic fibrosis sections had a greater proliferation index than control sections with 25.1 +/- 2.1% positively staining nuclei/total nuclei compared with control sections, 4.6 +/- 0.9% (p = 0.002). In cystic fibrosis sections only, there were areas of hyperplastic cuboidal cells adjacent to normal pseudostratified columnar epithelial sections; in these areas of epithelial hyperplasia, there was uniform Ki-67 staining, indicating a zone of proliferating cells. The proliferating cell population also expressed the basal cell cytokeratins 5/14 and epidermal growth factor receptor. Expression of ErbB2 was diminished in the proliferating cells.

CONCLUSIONS

Our results suggest that basal-like cells, expressing the epidermal growth factor receptor, constitute the proliferating cell population in cystic fibrosis airways.

The three-dimensional structure of trichocyte (hard alpha-) keratin intermediate filaments: features of the molecular packing deduced from the sites of induced crosslinks

The spatial distribution of the crosslinks that can be induced between lysine residues in trichocyte (alpha-) keratin intermediate filaments (IF) using disulfosuccinimidyl tartrate has been analyzed in detail and the results used to provide information about the three-dimensional (3-D) structure. The pattern of inter-molecular interactions derived from earlier studies is essentially two-dimensional in that it involves projection on to a cylinder followed by unwrapping to give a sheet. Crosslinks are observed between molecular strands four apart and it is shown that this can only occur if the paths of the molecular strands through the IF are systematically distorted. These crosslinks are clustered axially at intervals of around 15 nm, a value closely related to the pitch length of the constituent coiled-coil molecules in the rod domains. The number of crosslinks between adjacent molecular strands shows a striking difference depending on lateral direction and provides support for the concept of a head-to-tail stacking of tetramers defined by the A(CN) mode of packing to form protofilament substructures in the fully formed IF. Each protofilament would consist of a pair of oppositely directed molecular strands stabilized by A(11) and A(22) interactions identified in earlier work. A detailed model for the IF in the reduced state comprising a ring of eight protofilaments is suggested. When combined with earlier studies of crosslink formation in the oxidized state, the present findings lead to the conclusion that there is a major reorganization of the molecular packing within the protofilaments during keratinization in vivo. Taken in conjunction with existing X-ray data on the fully keratinized structures, the new evidence for a protofilament substructure also enables a detailed 3-D model for the mature IF to be suggested.

Ichthyosis bullosa of Siemens: its correct diagnosis facilitated by molecular genetic testing

Ichthyosis bullosa of Siemens (IBS, MIM 146800) is a unique congenital ichthyosis characterized by mild epidermal hyperkeratosis over flexural areas, blister formation and the development of superficially denuded areas of hyperkeratotic skin. It is clinically difficult to distinguish severe IBS from mild bullous congenital ichthyosiform erythroderma (BCIE, MIM 113800). In the current literature, 19 IBS families with keratin 2e (K2e) mutations have been reported, despite only five IBS families having been reported before the first identification of K2e mutation in 1994. We studied four patients from three Japanese IBS families. They had previously been misdiagnosed as having BCIE before the correct diagnosis was made after mutation detection. To detect the pathogenic mutations, we performed direct sequencing of the entire coding regions of KRT2E encoding K2e in the patients and healthy family members. K2e mutations, a 1469T-->C transition (L490P) and a 1477G-->A transition (E493K) within the conserved 2B helix termination motif of the rod domain were detected in the families and the definite diagnosis of IBS was made in the four cases. The present results indicate that IBS is not such a rare entity as was previously thought, and accurate diagnosis is now available by mutation analysis.

A small surface hydrophobic stripe in the coiled-coil domain of type I keratins mediates tetramer stability

Intermediate filaments (IFs) are fibrous polymers encoded by a large family of differentially expressed genes that provide crucial structural support in the cytoplasm and nucleus in higher eukaryotes. The mechanisms involved in bringing together ∼16 elongated coiled-coil dimers to form an IF are poorly defined. Available evidence suggests that tetramer subunits play a key role during IF assembly and regulation. Through molecular modeling and site-directed mutagenesis, we document a hitherto unnoticed hydrophobic stripe exposed at the surface of coiled-coil keratin heterodimers that contributes to the extraordinary stability of heterotetramers. The inability of K16 to form urea-stable tetramers in vitro correlates with an increase in its turnover rate in vivo. The data presented support a specific conformation for the assembly competent IF tetramer, provide a molecular basis for their differential stability in vitro, and point to the physiological relevance associated with this property in vivo.

The formation of wrinkles caused by transition of keratin intermediate filaments after repetitive UVB exposure

It has been reported that the formation of wrinkles involves changes in the elastic properties of the dermis due to the denaturation of elastic fibers. Several studies have shown that the hydration condition of the stratum corneum is also important in wrinkle formation. It is, however, still unclear how the stratum corneum contributes to wrinkle formation. Here we investigated the relationship between the formation of wrinkles and changes in the physical properties and condition of the skin after repetitive ultraviolet B (UVB) irradiation of hairless mice (HR/ICR). Repetitive UVB irradiation caused wrinkles on the dorsal skin of the mice. The elasticity (E') of the stratum corneum of UVB-irradiated mice was significantly lower than that of age-matched control (unirradiated) mice. UVB exposure also caused a deterioration of the fibrous ultrastructure of keratin intermediate filaments (KIFs) in the skin. We conclude that the deterioration of KIFs in the stratum corneum caused by repetitive UVB irradiation decreases the elastic properties of the stratum corneum, resulting in the formation of wrinkles.

Inhibition of basement membrane formation by a nidogen-binding laminin gamma1-chain fragment in human skin-organotypic cocultures

Basement membranes generally determine different tissue compartments in complex organs, such as skin, playing not only an important structural but also a regulatory role. We have previously demonstrated the formation of a regular basement membrane in organotypic three-dimensional (3D)-cocultures of human skin keratinocytes and fibroblasts by indirect immunofluorescence and transmission electron microscopy. In this assembly process, cross-linking of type IV collagen and the laminin gamma1 chain by nidogen is considered a crucial step. For a functional proof, we have now competitively inhibited nidogen binding to laminin in 3D-cocultures with a recombinant laminin gamma1 fragment (gamma1III3-5 module) spanning this binding site. Repeated treatment abolished the deposition of nidogen at the epithelial-matrix interface but also greatly perturbed the presence of other matrix constituents such as laminin and perlecan. This effect persisted over the entire observation period of 10 to 21 days. In contrast, some components of the basement membrane zone were only moderately affected, with the laminin-5 isoform (gamma2 chain), type IV collagen and integrin alpha6ss4 still showing a distinct staining at their regular position, when seen by light microscopy. Furthermore, epidermal morphology and differentiation remained largely normal as indicated by the regular location of keratins K1/K10 and also of late differentiation markers. Ultrastructural examination demonstrated that the gamma1 fragment completely suppressed any formation of basement membrane structures (lamina densa) and also of hemidesmosomal adhesion complexes. As a consequence of hemidesmosome deficiency, keratin filament bundles were not attached to the ventral basal cell aspect. These findings were further substantiated by immuno-electron microscopy, revealing either loss or drastic reduction and dislocation of basement membrane and hemidesmosomal components. Taken together, in this simplified human skin model (representing a 'closed system') a functional link has been demonstrated between compound structures of the extra- and intracellular space at the junctional zone providing a basis to interfere at distinct points and in a controlled fashion.

Characterization of beta-keratins and associated proteins in adult and regenerating epidermis of lizards

Reptilian epidermis contains two types of keratin, soft (alpha) and hard (beta). The biosynthesis and molecular weight of beta-keratin during differentiation of lizard epidermis have been studied by autoradiography, immunocytochemistry and immunoblotting. Tritiated proline is mainly incorporated into differentiating and maturing beta-keratin cells with a pattern similar to that observed after immunostaining with a chicken beta-keratin antibody. While the antibody labels a mature form of beta-keratin incorporated in large filaments, the autoradiographic analysis shows that beta-keratin is produced within the first 30 min in ribosomes, and is later packed into large filaments. Also the dermis incorporates high amount of proline for the synthesis of collagen. The skin was separated into epidermis and dermis, which were analyzed separately by protein extraction and electrophoresis. In the epidermal extract proline-labeled proteic bands at 10, 15, 18-20, 42-45, 52-56, 85-90 and 120 kDa appear at 1, 3 and 5 h post-injection. The comparison with the dermal extract shows only the 85-90 and 120 kDa bands, which correspond to collagen. Probably the glycine-rich sequences of collagen present also in beta-keratins are weakly recognized by the beta-1 antibody. Immunoblotting with the beta-keratin antibody identifies proteic bands according to the isolation method. After-saline or urea-thiol extraction bands at 10-15, 18-20, 40, 55 and 62 kDa appear. After extraction and carboxymethylation, weak bands at 10-15, 18-20 and 30-32 kDa are present in some preparations, while in others also bands at 55 and 62 kDa are present. It appears that the lowermost bands at 10-20 kDa are simple beta-keratins, while those at 42-56 kDa are complex or polymeric forms of beta-keratins. The smallest beta-keratins (10-20 kDa) may be early synthesized proteins that are polymerized into larger beta-keratins which are then packed to form larger filaments. Some proline-labeled bands differ from those produced after injection of tritiated histidine. The latter treatment does not show 10-20 kDa labeled proteins, but tends to show bands at 27, 30-33, 40-42 and 50-62 kDa. Histidine-labeled proteins mainly localize in keratohyalin-like granules and dark keratin bundles of clear-oberhautchen layers of lizard epidermis, and their composition is probably different from that of beta-keratin.

Novel approach to fabricate keratin sponge scaffolds with controlled pore size and porosity

A compression-molding/particulate-leaching (CM/PL) method was developed to fabricate S-sulfo keratin sponges with the controlled pore size and porosity. The S-sulfo keratin was extracted from wool and was then spray-dried to give S-sulfo keratin powder. The S-sulfo keratin powder mixed with urea in advance was compression-molded together with the sieved NaCl particulates above the melting temperature of urea. The following removal of the salts and urea in water created the sponges composed of interconnected pores and the continuous S-sulfo keratin matrix. The S-sulfo keratin sponges were strong enough to handle and water-insoluble. By contrast, the sponges prepared without urea were very fragile and readily collapsed, because most of S-sulfo keratin matrix remained powdery. The pore size was in good accordance with the size of the salts, indicating that the pores were formed by leaching-out the salts. The S-sulfo keratin sponges with the regulated sizes of pores (<100, 100-300 and 300-500 microm) were fabricated, all of which had more than 90% of the porosity. Thus, CM/PL method is able to give the S-sulfo keratin sponge with the desired pore size and porosity, which might be a good scaffold for the cells in tissue engineering.

Preparation and physicochemical properties of compression-molded keratin films

The S-sulfo keratin was extracted from wool and was then spray-dried to give S-sulfo keratin powder. Differential scanning calorimetry analysis showed that the glass transition temperature of S-sulfo keratins became lowered with the increase of moisture content, while perfectly dried S-sulfo keratin powder did not give thermal transition in the temperature range 30-130 degrees C. The compression molding of the S-sulfo keratin powder supplemented with one-tenth weight of water afforded a plastic-like transparent proteinous film above the glass transition temperature. The film obtained from the powder without water addition or compression molded below glass transition temperature partly remained powdery. The film compression molded at 120 degrees C gave the maximum ultimate strength and Young's modulus, 27.8 +/- 2.9 and 1218 +/- 80 MPa, respectively. Obtained film was insoluble and slightly swelled in water, but, in the presence of reducing agent, the film significantly swelled at pH 7.0 and even dissolved at pH 9.0, suggesting the relevance of abundant disulfide linkage. The film supported the mammalian cell adhesion and proliferation, demonstrating the biocompatibility of S-sulfo keratin films.

Identification of novel principles of keratin filament network turnover in living cells

It is generally assumed that turnover of the keratin filament system occurs by exchange of subunits along its entire length throughout the cytoplasm. We now present evidence that a circumscribed submembranous compartment is actually the main site for network replenishment. This conclusion is based on the following observations in living cells synthesizing fluorescent keratin polypeptides: 1) Small keratin granules originate in close proximity to the plasma membrane and move toward the cell center in a continuous motion while elongating into flexible rod-like fragments that fuse with each other and integrate into the peripheral KF network. 2) Recurrence of fluorescence after photobleaching is first seen in the cell periphery where keratin filaments are born that translocate subsequently as part of the network toward the cell center. 3) Partial keratin network reformation after orthovanadate-induced disruption is restricted to a distinct peripheral zone in which either keratin granules or keratin filaments are transiently formed. These findings extend earlier investigations of mitotic cells in which de novo keratin network formation was shown to originate from the cell cortex. Taken together, our results demonstrate that the keratin filament system is not homogeneous but is organized into temporally and spatially distinct subdomains. Furthermore, the cortical localization of the regulatory cues for keratin filament turnover provides an ideal way to adjust the epithelial cytoskeleton to dynamic cellular processes.

Hair follicle differentiation and regulation

Ten years ago, Hardy (1992) wrote a timely review on the major features of hair follicle development and hair growth which she referred to as a secret life. Many of these secrets are now being revealed. The information discussed in this brief review comprises the structure of the hair and hair follicle, the continuing characterisation of the genes for keratin and keratin associated proteins, the determination of the location of their expression in the different cell layers of the hair follicle, molecular signals which control keratin gene expression and post-translational events in the terminal stages of hair formation.