Variation in Morphology and Airborne Dispersal of the Urticating Apparatus of Ochrogaster lunifer (Lepidoptera: Notodontidae), an Australian Processionary Caterpillar, and Implications for Livestock and Humans

True setae borne on the abdominal tergites of Ochrogaster lunifer Herrich-Schӓffer caterpillars are the agents of an irritating contact dermatitis, osteomyelitis, ophthalmia, and severe allergic reactions in humans, and are the cause of Equine Amnionitis and Fetal Loss in Australia. The setae are detached and readily dislodge from the integument whereby they disperse throughout the environment. To better understand the true setae of O. lunifer as agents of medical and veterinary concern, we studied their characteristics and distance dispersed. Whereas members of the European Thaumetopoeinae have been widely studied, their southern-hemisphere counterparts such as O. lunifer are not well known despite their harmfulness and known medical and veterinary importance. The caterpillar's investment in true setae increased with age and size, and two distinct size classes co-occurred in setae fields. A previously undescribed morphological type of true seta was found on the first abdominal segment. All true setae were calculated to travel long distances in the air even under light breeze conditions. Our results show there is a high risk of exposure to airborne urticating setae within 100 m of elevated caterpillar activity, and a likely risk of exposure for some kilometers in the direction of the prevailing breeze. This information should be used to inform management strategies in areas where urticating processionary caterpillars are active, and especially during periods of an outbreak.

Associations Between the Small Hive Beetle and the Yeast Kodamaea ohmeri Throughout the Host Life Cycle

The small hive beetle, Aethina tumida Murray (Coleoptera: Nitidulidae), is a pest of colonies of social bees, including the honeybee Apis mellifera L. (Hymenoptera: Apidae). We investigated A. tumida oviposition behavior and development and found that it laid eggs in clutches that ranged in size (3-75 eggs per clutch) and that when fed on hive products in laboratory culture (27°C; RH 65%; 12:12 (L:D) h) it completed three larval instars before pupation. The yeast Kodamaea ohmeri (Etchells & Bell) Y. Yamada, T. Suzuki, M. Matsuda & K. Mikata (Ascomycota: Saccharomycotina) is associated with A. tumida, but the exact nature of this relationship is unknown. We examined the association in host eggs, larvae, pupae, and adults to establish its extent and potential specificity and determined the likely mechanism of vertical transmission. K. ohmeri was detected in egg mucilage and on host cuticle and from internal preparations of A. tumida at every stage of development. Based on colony forming unit (CFU) counts, the K. ohmeri densities varied significantly between developmental stages; the highest internal density was recorded in third instar larvae. Presence of K. ohmeri within adult A. tumida was not affected by contamination of the cuticle by the yeast during the larval and pupal stages nor by the mated status of the adult. This deepened understanding of A. tumida ovipositional behavior and larval development along with a better understanding of the relationship between K. ohmeri and its host is important for the development of management strategies for this important pest.

Morphological comparison of the ampullae of Lorenzini of three sympatric benthic rays

This study investigated and compared the morphology of the electrosensory system of three species of benthic rays. Neotrygon trigonoides, Hemitrygon fluviorum and Maculabatis toshi inhabit similar habitats within Moreton Bay, Queensland, Australia. Like all elasmobranchs, they possess the ability to detect weak electrical fields using their ampullae of Lorenzini. Macroscopically, the ampullary organs of all three species are aggregated in three bilaterally paired clusters: the mandibular, hyoid and superficial ophthalmic clusters. The hyoid and superficial ophthalmic clusters of ampullae arise from both dorsal and ventral ampullary pores. The dorsal pores are typically larger than the ventral pores in all three species, except for the posterior ventral pores of the hyoid grouping. Ampullary canals arising from the hyoid cluster possessed a quasi-sinusoidal shape, but otherwise appeared similar to the canals described for other elasmobranchs. Ultrastructure of the ampullae of Lorenzini of the three species was studied using a combination of light, confocal and electron microscopy. All possess ampullae of the alveolar type. In N. trigonoides and M. toshi, each ampullary canal terminates in three to five sensory chambers, each comprising several alveoli lined with receptor and supportive cells and eight to 11 sensory chambers in H. fluviorum. Receptor cells of all three species possess a similar organization to those of other elasmobranchs and were enveloped by large, apically nucleated supportive cells protruding well into the alveolar sacs. The luminally extended chassis of supportive cells protruding dramatically into the ampullary lumen had not previously been documented for any elasmobranch species.

Insect Analogue to the Lotus Leaf: A Planthopper Wing Membrane Incorporating a Low-Adhesion, Nonwetting, Superhydrophobic, Bactericidal, and Biocompatible Surface

Nature has produced many intriguing and spectacular surfaces at the micro- and nanoscales. These small surface decorations act for a singular or, in most cases, a range of functions. The minute landscape found on the lotus leaf is one such example, displaying antiwetting behavior and low adhesion with foreign particulate matter. Indeed the lotus leaf has often been considered the "benchmark" for such properties. One could expect that there are animal counterparts of this self-drying and self-cleaning surface system. In this study, we show that the planthopper insect wing (Desudaba danae) exhibits a remarkable architectural similarity to the lotus leaf surface. Not only does the wing demonstrate a topographical likeness, but some surface properties are also expressed, such as nonwetting behavior and low adhering forces with contaminants. In addition, the insect-wing cuticle exhibits an antibacterial property in which Gram-negative bacteria (Porphyromonas gingivalis) are killed over many consecutive waves of attacks over 7 days. In contrast, eukaryote cell associations, upon contact with the insect membrane, lead to a formation of integrated cell sheets (e.g., among human stem cells (SHED-MSC) and human dermal fibroblasts (HDF)). The multifunctional features of the insect membrane provide a potential natural template for man-made applications in which specific control of liquid, solid, and biological contacts is desired and required. Moreover, the planthopper wing cuticle provides a "new" natural surface with which numerous interfacial properties can be explored for a range of comparative studies with both natural and man-made materials.

Diversity of Cuticular Micro- and Nanostructures on Insects: Properties, Functions, and Potential Applications

Insects exhibit a fascinating and diverse range of micro- and nanoarchitectures on their cuticle. Beyond the spectacular beauty of such minute structures lie surfaces evolutionarily modified to act as multifunctional interfaces that must contend with a hostile, challenging environment, driving adaption so that these can then become favorable. Numerous cuticular structures have been discovered this century; and of equal importance are the properties, functions, and potential applications that have been a key focus in many recent studies. The vast range of insect structuring, from the most simplistic topographies to the most elegant and geometrically complex forms, affords us with an exhaustive library of natural templates and free technologies to borrow, replicate, and employ for a range of applications. Of particular importance are structures that imbue cuticle with antiwetting properties, self-cleaning abilities, antireflection, enhanced color, adhesion, and antimicrobial and specific cell-attachment properties.

The urticating setae of Ochrogaster lunifer, an Australian processionary caterpillar of veterinary importance

The bag-shelter moth, Ochrogaster lunifer Herrich-Schaffer (Lepidoptera: Notodontidae), is associated with a condition called equine amnionitis and fetal loss (EAFL) on horse farms in Australia. Setal fragments from O. lunifer larvae have been identified in the placentas of experimentally aborted fetuses and their dams, and in clinical abortions. The gregarious larvae build silken nests in which large numbers cohabit over spring, summer and autumn. The final instars disperse to pupation sites in the ground where they overwinter. Field-collected O. lunifer larvae, their nests and nearby soil were examined using light and electron microscopy to identify setae likely to cause EAFL and to determine where and how many were present. Microtrichia, barbed hairs and true setae were found on the exoskeletons of the larvae. True setae matching the majority of setal fragments described from equine tissue were found on third to eighth instar larvae or exuviae. The number of true setae increased with the age of the larva; eighth instars carried around 2.0-2.5 million true setae. The exuvia of the pre-pupal instar was incorporated into the pupal chamber. The major sources of setae are likely to be nests, dispersing pre-pupal larvae and their exuviae, and pupal chambers.

Contaminant adhesion (aerial/ground biofouling) on the skin of a gecko

In this study, we have investigated the micro- and nano-structuring and contaminant adhesional forces of the outer skin layer of the ground dwelling gecko--Lucasium steindachneri. The lizard's skin displayed a high density of hairs with lengths up to 4 μm which were spherically capped with a radius of curvature typically less than 30 nm. The adhesion of artificial hydrophilic (silica) and hydrophobic (C18) spherical particles and natural pollen grains were measured by atomic force microscopy and demonstrated extremely low values comparable to those recorded on superhydrophobic insects. The lizard scales which exhibited a three-tier hierarchical architecture demonstrated higher adhesion than the trough regions between scales. The two-tier roughness of the troughs comprising folding of the skin (wrinkling) limits the number of contacting hairs with particles of the dimensions used in our study. The gecko skin architecture on both the dorsal and trough regions demonstrates an optimized topography for minimizing solid-solid and solid-liquid particle contact area, as well as facilitating a variety of particulate removal mechanisms including water-assisted processes. These contrasting skin topographies may also be optimized for other functions such as increased structural integrity, levels of wear protection and flexibility of skin for movement and growth. While single hair adhesion is low, contributions of many thousands of individual hairs (especially on the abdominal scale surface and if deformation occurs) may potentially aid in providing additional adhesional capabilities (sticking ability) for some gecko species when interacting with environmental substrates such as rocks, foliage and even man-made structuring.

Removal mechanisms of dew via self-propulsion off the gecko skin

Condensation resulting in the formation of water films or droplets is an unavoidable process on the cuticle or skin of many organisms. This process generally occurs under humid conditions when the temperature drops below the dew point. In this study, we have investigated dew conditions on the skin of the gecko Lucasium steindachneri. When condensation occurs, we show that small dew drops, as opposed to a thin film, form on the lizard's scales. As the droplets grow in size and merge, they can undergo self-propulsion off the skin and in the process can be carried away a sufficient distance to freely engage with external forces. We show that factors such as gravity, wind and fog provide mechanisms to remove these small droplets off the gecko skin surface. The formation of small droplets and subsequent removal from the skin may aid in reducing microbial contact (e.g. bacteria, fungi) and limit conducive growth conditions under humid environments. As well as providing an inhospitable microclimate for microorganisms, the formation and removal of small droplets may also potentially aid in other areas such as reduction and cleaning of some surface contaminants consisting of single or multiple aggregates of particles.

A gecko skin micro/nano structure - A low adhesion, superhydrophobic, anti-wetting, self-cleaning, biocompatible, antibacterial surface

Geckos, and specifically their feet, have attracted significant attention in recent times with the focus centred around their remarkable adhesional properties. Little attention however has been dedicated to the other remaining regions of the lizard body. In this paper we present preliminary investigations into a number of notable interfacial properties of the gecko skin focusing on solid and aqueous interactions. We show that the skin of the box-patterned gecko (Lucasium sp.) consists of dome shaped scales arranged in a hexagonal patterning. The scales comprise of spinules (hairs), from several hundred nanometres to several microns in length, with a sub-micron spacing and a small radius of curvature typically from 10 to 20 nm. This micro and nano structure of the skin exhibited ultralow adhesion with contaminating particles. The topography also provides a superhydrophobic, anti-wetting barrier which can self clean by the action of low velocity rolling or impacting droplets of various size ranges from microns to several millimetres. Water droplets which are sufficiently small (10-100 μm) can easily access valleys between the scales for efficient self-cleaning and due to their dimensions can self-propel off the surface enhancing their mobility and cleaning effect. In addition, we demonstrate that the gecko skin has an antibacterial action where Gram-negative bacteria (Porphyromonas gingivalis) are killed when exposed to the surface however eukaryotic cell compatibility (with human stem cells) is demonstrated. The multifunctional features of the gecko skin provide a potential natural template for man-made applications where specific control of liquid, solid and biological contacts is required.

Firing the sting: chemically induced discharge of cnidae reveals novel proteins and peptides from box jellyfish (Chironex fleckeri) venom

Cnidarian venom research has lagged behind other toxinological fields due to technical difficulties in recovery of the complex venom from the microscopic nematocysts. Here we report a newly developed rapid, repeatable and cost effective technique of venom preparation, using ethanol to induce nematocyst discharge and to recover venom contents in one step. Our model species was the Australian box jellyfish (Chironex fleckeri), which has a notable impact on public health. By utilizing scanning electron microscopy and light microscopy, we examined nematocyst external morphology before and after ethanol treatment and verified nematocyst discharge. Further, to investigate nematocyst content or "venom" recovery, we utilized both top-down and bottom-up transcriptomics-proteomics approaches and compared the proteome profile of this new ethanol recovery based method to a previously reported high activity and recovery protocol, based upon density purified intact cnidae and pressure induced disruption. In addition to recovering previously characterized box jellyfish toxins, including CfTX-A/B and CfTX-1, we recovered putative metalloproteases and novel expression of a small serine protease inhibitor. This study not only reveals a much more complex toxin profile of Australian box jellyfish venom but also suggests that ethanol extraction method could augment future cnidarian venom proteomics research efforts.

The comparative morphology of epidermal glands in Pentatomoidea (Heteroptera)

The Heteroptera show a diversity of glands associated with the epidermis. They have multiple roles including the production of noxious scents. Here, we examine the cellular arrangement and cytoskeletal components of the scent glands of pentatomoid Heteroptera in three families, Pentatomidae (stink bugs), Tessaratomidae, and Scutelleridae (shield-backed bugs or jewel bugs). The glands are; (1) the dorsal abdominal glands, (2) the tubular glands of the composite metathoracic gland, and (3) the accessory gland component of the composite metathoracic gland. The dorsal abdominal glands are at their largest in nymphs and decrease in size in adults. The metathoracic gland is an adult-specific gland unit with a reservoir and multiple types of gland cells. The accessory gland is composed of many unicellular glands concentrated in a sinuous line across the reservoir wall. The lateral tubular gland is composed of two-cell units. The dorsal abdominal glands of nymphs are composed of three-cell units with a prominent cuticular component derived from the saccule cell sitting between the duct and receiving canal. The cuticular components that channel secretion from the microvilli of the secretory cell to the exterior differ in the three gland types. The significance of the numbers of cells comprising gland units is related to the role of cells in regenerating the cuticular components of the glands at moulting in nymphs.

Comparing the secretory pathway in honeybee venom and hypopharyngeal glands

We provide insights into the secretory pathway of arthropod gland systems by comparing the royal jelly-producing hypopharyngeal glands and the venom-producing glands of the honeybee, Apis mellifera. These glands have different functions and different product release characteristics, but both belong to the class 3 types of insect glands, each being composed of two cells, a secretory cell and a microduct-forming cell. The hypopharyngeal secretory cells possess an extremely elongate tubular invagination that is filled with a cuticular structure, the end-apparatus, anchored against the cell membrane by a conspicuous series of actin rings. In contrast, venom glands have no actin rings, but instead have an actin-rich brush border surrounding the comparatively short and narrow end-apparatus. We relate these cytoskeletal differences to the production system and utilisation of secretions; venom is stored in a reservoir whereas royal jelly and enzymes are produced on demand. Fluorescence-based characterisation of the actin cytoskeleton combined with scanning electron microscopy of the end-apparatus allows for detailed characterisation of the point of secretion release in insect class 3 glands.

Generalist insects behave in a jasmonate-dependent manner on their host plants, leaving induced areas quickly and staying longer on distant parts

Plants are sessile, so have evolved sensitive ways to detect attacking herbivores and sophisticated strategies to effectively defend themselves. Insect herbivory induces synthesis of the phytohormone jasmonic acid which activates downstream metabolic pathways for various chemical defences such as toxins and digestion inhibitors. Insects are also sophisticated animals, and many have coevolved physiological adaptations that negate this induced plant defence. Insect behaviour has rarely been studied in the context of induced plant defence, although behavioural adaptation to induced plant chemistry may allow insects to bypass the host's defence system. By visualizing jasmonate-responsive gene expression within whole plants, we uncovered spatial and temporal limits to the systemic spread of plant chemical defence following herbivory. By carefully tracking insect movement, we found induced changes in plant chemistry were detected by generalist Helicoverpa armigera insects which then modified their behaviour in response, moving away from induced parts and staying longer on uninduced parts of the same plant. This study reveals that there are plant-wide signals rapidly generated following herbivory that allow insects to detect the heterogeneity of plant chemical defences. Some insects use these signals to move around the plant, avoiding localized sites of induction and staying ahead of induced toxic metabolites.

Contrasting micro/nano architecture on termite wings: two divergent strategies for optimising success of colonisation flights

Many termite species typically fly during or shortly after rain periods. Local precipitation will ensure water will be present when establishing a new colony after the initial flight. Here we show how different species of termite utilise two distinct and contrasting strategies for optimising the success of the colonisation flight. Nasutitermes sp. and Microcerotermes sp. fly during rain periods and adopt hydrophobic structuring/‘technologies’ on their wings to contend with a moving canvas of droplets in daylight hours. Schedorhinotermes sp. fly after rain periods (typically at night) and thus do not come into contact with mobile droplets. These termites, in contrast, display hydrophilic structuring on their wings with a small scale roughness which is not dimensionally sufficient to introduce an increase in hydrophobicity. The lack of hydrophobicity allows the termite to be hydrophilicly captured at locations where water may be present in large quantities; sufficient for the initial colonization period. The high wettability of the termite cuticle (Schedorhinotermes sp.) indicates that the membrane has a high surface energy and thus will also have strong attractions with solid particles. To investigate this the termite wings were also interacted with both artificial and natural contaminants in the form of hydrophilic silicon beads of various sizes, 4 µm C₁₈ beads and three differently structured pollens. These were compared to the superhydrophobic surface of the planthopper (Desudaba psittacus) and a native Si wafer surface. The termite cuticle demonstrated higher adhesive interactions with all particles in comparison to those measured on the plant hopper.

Non-wetting wings and legs of the cranefly aided by fine structures of the cuticle

Non-wetting surfaces are imperative to the survival of terrestrial and semi-aquatic insects as they afford resistance to wetting by rain and other liquid surfaces that insects may encounter. Thus, there is an evolutionary pay-off for these insects to adopt hydrophobic technologies, especially on contacting surfaces such as legs and wings. The cranefly is a weak flier, with many species typically found in wet/moist environments where they lay eggs. Water droplets placed on this insect's wings will spontaneously roll off the surface. In addition, the insect can stand on water bodies without its legs penetrating the water surface. The legs and wings of this insect possess thousands of tiny hairs with intricate surface topographies comprising a series of ridges running longitudinally along the long axis of the hair fibre. Here we demonstrate that this fine hair structure enhances the ability of the hairs to resist penetration into water bodies.

A dual layer hair array of the brown lacewing: repelling water at different length scales

Additional weight due to contamination (water and/or contaminating particles) can potentially have a detrimental effect on the flight capabilities of large winged insects such as butterflies and dragonflies. Insects where the wing surface area-body mass ratio is very high will be even more susceptible to these effects. Water droplets tend to move spontaneously off the wing surface of these insects. In the case of the brown lacewing, the drops effectively encounter a dual bed of hair springs with a topographical structure which aids in the hairs resisting penetration into water bodies. In this article, we demonstrate experimentally how this protective defense system employed by the brown lacewing (Micromus tasmaniae) aids in resisting contamination from water and how the micro- and nanostructures found on these hairs are responsible for quickly shedding water from the wing which demonstrates an active liquid-repelling surface.

Fouling of nanostructured insect cuticle: adhesion of natural and artificial contaminants

The adhesional properties of contaminating particles of scales of various lengths were investigated for a wide range of micro- and nanostructured insect wing cuticles. The contaminating particles consisted of artificial hydrophilic (silica) and spherical hydrophobic (C(18)) particles, and natural pollen grains. Insect wing cuticle architectures with an open micro-/nanostructure framework demonstrated topographies for minimising solid-solid and solid-liquid contact areas. Such structuring of the wing membranes allows for a variety of removal mechanisms to contend with particle contact, such as wind and self-cleaning droplet interactions. Cuticles exhibiting high contact angles showed considerably lower particle adhesional forces than more hydrophilic insect surfaces. Values as low as 3 nN were recorded in air for silica of ~28 nm in diameter and <25 nN for silica particles 30 μm in diameter. A similar adhesional trend was also observed for contact with pollen particles.

Experimental determination of the efficiency of nanostructuring on non-wetting legs of the water strider

Water striders demonstrate an amazing talent which enables them to effectively "row" across water surfaces without immobilization. This ability has previously been ascribed to the wax-like chemistry of the small hairs (setae) found on the legs, and theoretically attributed to the nano/microscaled hierarchical architecture of individual seta using the Cassie-Baxter equations. Here we show experimentally the strength of the contribution of the seta surface architecture to superhydrophobicity by maintaining identical surface chemistry (thin and thick coating of the setae with polydimethylsiloxane). Atomic force microscopy-based force and adhesion measurements of single uncoated and coated seta interacting with water quantitatively demonstrate the efficiency of the topographical component of the setae for repelling water.

The movement and distribution of Helicoverpa armigera (Hübner) larvae on pea plants is affected by egg placement and flowering

The distribution and movement of 1st instar Helicoverpa armigera (Hübner) (Lepidoptera: Noctuidae) larvae on whole garden pea (Pisum sativum L.) plants were determined in glasshouse trials. This economically-important herbivore attacks a wide variety of agricultural, horticultural and indigenous plants. To investigate the mechanisms underlying larval intra-plant movement, we used early-flowering and wild-type plant genotypes and placed eggs at different vertical heights within the plants, one egg per plant. Leaf water and nitrogen content and cuticle hardness were measured at the different plant heights. Of 92 individual larvae, 41% did not move from the node of eclosion, 49% moved upwards and 10% moved downwards with the distance moved being between zero and ten plant nodes. Larvae from eggs placed on the lower third of the plant left the natal leaf more often and moved further than larvae from eggs placed in the middle or upper thirds. The low nutritive value of leaves was the most likely explanation for more movement away from lower plant regions. Although larvae on flowering plants did not move further up or down than larvae on non-flowering plants, they more often departed the leaflet (within a leaf) where they eclosed. The final distribution of larvae was affected by plant genotype, with larvae on flowering plants found less often on leaflets and more often on stipules, tendrils and reproductive structures. Understanding intra-plant movement by herbivorous insects under natural conditions is important because such movement determines the value of economic loss to host crops. Knowing the behaviour underlying the spatial distribution of herbivores on plants will assist us to interpret field data and should lead to better informed pest management decisions.

The role of micro/nano channel structuring in repelling water on cuticle arrays of the lacewing

Non-wetting surfaces help in the survival of terrestrial and semi-aquatic insects. Some insects encounter wetting by rain, through contact with water collected on foliage, or in ponds, rivers or streams. There is an evolutionary pay-off for such insects to adopt hydrophobic structuring especially on regions that contact water, such as legs or large surface areas such as wings. Here we investigate lacewings which are good candidates for getting trapped to water because of a large wing surface area-to-body mass ratio. The lacewing utilises a variety of structures/mechanisms to contend with water contact. The first level involves small hairs (macrotrichia) that project from veins on the wings and collectively hold up droplets of water above the wing surface. This defence against wetting is aided by longitudinal ridges and troughs along the hair shaft. We show, by coating single hairs with a hydrophobic polymer (similar in hydrophobicity to insect cuticle), that the channels significantly contribute to repel water droplets. Beneath the array of hairs lies a dense netting on the cuticle wing surface which reduces contact with smaller droplets. The study has implications for both insect biology and biomimetic surfaces such as light weight superhydrophobic materials.

How micro/nanoarchitecture facilitates anti-wetting: an elegant hierarchical design on the termite wing

The termite is an insect which is a weak flier, has a large wing area in relation to its body mass, and many species typically fly during rain or storm periods. Water droplets placed on these insects' wings will spontaneously roll off the surface. Here we show how the intricate hierarchical array design of these insect wings achieves anti-wetting properties with water bodies of various sizes by reducing contact area and thus adhesion. To repel large droplets, the termite uses an array of hairs with a specially designed nanoarchitecture, which we demonstrate is critical for this function. By coating single hairs with a polymer of varying thicknesses (with a similar hydrophobicity to insect cuticle), we demonstrate that hairs of the same chemistry and with the complete nanoarchitecture show the greatest resistance to penetrating water bodies. The wings also consist of an underlying non-wetting membrane substructure comprising an array of star-shaped microstructures which minimize interaction with micro-sized droplets of water. The sophisticated micro/nanostructured hierarchy on the termite wing membrane not only results in non-wetting at different length scales but also demonstrates a design for weight and material minimization while achieving this state. Elucidating the function of such structures has implications for understanding insect biology and the evolution of wings.

Structure, composition and properties of naturally occurring non-calcified crustacean cuticle

Crustaceans are known for their hard, calcified exoskeleton; however some regions appear different in colour and opacity. These include leg and cheliped tips in the grapsid crab, Metopograpsus frontalis. The chelipeds and leg tips contain only trace levels of calcium but a significant mass of the halogens, chlorine (Cl) and bromine (Br). In contrast, the carapace is heavily calcified and contains only a trace mass of Cl and no Br. In transverse section across the non-calcified tip regions of cheliped and leg the mass percent of halogens varies with position. As such, the exoskeleton of M. frontalis provides a useful model to examine a possible correlation of halogen concentration with the physical properties of hardness (H) and reduced elastic modulus (E(r)), within a chitin-based matrix. Previously published work suggests a correlation exists between Cl concentration and hardness in similar tissues that contain a metal (e.g. zinc). However, in M. frontalis H and E(r) did not vary significantly across cheliped or leg tip despite differences in halogen concentration. The non-calcified regions of M. frontalis are less hard and less stiff than the carapace but equivalent to values found for insect cuticle lacking metals. Cheliped tips showed a complex morphological layering that differed from leg tips.

Insect mandibles—comparative mechanical properties and links with metal incorporation

A number of arthropod taxa contain metals in their mandibles (jaws), such as zinc, manganese, iron, and calcium. The occurrence of zinc and its co-located halogen chlorine have been studied in relation to the mechanical properties and shown to be linked in a direct fashion with increasing concentration. Hardness along with elastic modulus (stiffness) has also been linked to zinc and halogen concentration in some marine polychaete worms. The metal appears to be incorporated within the biological matrix, possibly bonding with proteins. However, the comparative advantage of metal inclusion has not been tested. It is possible that without metals, alternative mechanisms are used to achieve hardness of equal value in similar 'tools' such as mandibles. This question has direct bearing on the significance of metal hardening. In the present article, we compare across mandibles from six termite species, including samples with major zinc concentration, minor manganese, and no metals. Nanoindentation, electron microscopy, and electron microanalysis are used to assess metal concentration, form, and mechanical properties. The data demonstrate that termite mandibles lacking metals when fully developed have lower values for hardness and elastic modulus. Zinc is linked to a relative 20% increase in hardness when compared with mandibles devoid of metals. The similar transition metal, manganese, found in minor concentrations, is not linked to any significant increase in these mechanical properties. This raises the question of the function of manganese, which is as commonly found in insect mandibles as zinc and often located in the same mandibles.

Insect odour perception: recognition of odour components by flower foraging moths

Odours emitted by flowers are complex blends of volatile compounds. These odours are learnt by flower-visiting insect species, improving their recognition of rewarding flowers and thus foraging efficiency. We investigated the flexibility of floral odour learning by testing whether adult moths recognize single compounds common to flowers on which they forage. Dual choice preference tests on Helicoverpa armigera moths allowed free flying moths to forage on one of three flower species; Argyranthemum frutescens (federation daisy), Cajanus cajan (pigeonpea) or Nicotiana tabacum (tobacco). Results showed that, (i) a benzenoid (phenylacetaldehyde) and a monoterpene (linalool) were subsequently recognized after visits to flowers that emitted these volatile constituents, (ii) in a preference test, other monoterpenes in the flowers' odour did not affect the moths' ability to recognize the monoterpene linalool and (iii) relative preferences for two volatiles changed after foraging experience on a single flower species that emitted both volatiles. The importance of using free flying insects and real flowers to understand the mechanisms involved in floral odour learning in nature are discussed in the context of our findings.

Unicellular pheromone glands of the pentatomid bug Nezara viridula (Heteroptera: Insecta): ultrastructure, classification, and proposed function

Male Nezara viridula produce sex pheromones from many independent single cells, each with a duct that opens onto the ventral abdominal surface. Despite the presence of a long duct and an associated end complex (in the form of a cupule and microvillus saccule), the structural organization of the cells that comprise the gland conform to Class 1 epidermal gland cell classification : a single cell surrounds the entire secretory complex. Each cuticular cupule contains a central bed of filaments and opens into a narrow tubular ductule that leads from the base of the cupule through the epidermis to the cuticle to open externally as a pore. The cuticle of the cupule is continuous with that of the ductule and has the appearance of three layers, although the inner (middle) layer may be a gap formed during construction of the complex. In young adult males, just molted, the ultrastructure of the cells and their inclusions indicate that they are not active. The region of the cell that is distal to the abdominal cuticle is reduced and the proximal region, surrounding the duct, is enlarged when compared with sexually mature (3-4 weeks old) adult males. At maturity the pheromone cells are enlarged distally around the cupule, but are reduced to a narrow sleeve proximally, around the ductule. Two characteristic cell profiles are evident, based on the shape of the cupule and the organelle content. Type A shows a broad opening to the cupule, an abundance of mitochondria, and few vesicular bodies. Type B has an elongated, narrow, vase-like opening to the cupule, few mitochondria, and numerous vesicular bodies. Type B cells are smaller and more abundant than Type A. Distribution within the epidermal layer also differs. It is likely that the different types represent cells producing different secretion profiles. However, the secretions retained by the standard fixation protocol within mature cells of both types look similar and appear to collect as crystalline bodies within the lumen. This may represent a common storage mechanism.

Structure and ultrastructure of the silk glands and spinneret of Helicoverpa armigera (Hübner) (Lepidoptera: Noctuidae)

This study provides comprehensive documentation of silk production in the pest moth Helicoverpa armigera from gland secretion to extrusion of silk thread. The structure of the silk glands, accessory structures and extrusion apparatus are reported. The general schema of the paired silk glands follows that found for Lepidoptera. Morphology of the duct, silk press, muscle attachments and spigot are presented as a three-dimensional reconstruction and the cuticular crescent-shaped profile of the silk press is demonstrated in both open and closed forms with attendant muscle blocks, allowing advances in our knowledge of how the silk press functions to regulate the extrusion of silk. Growth of the spigot across instars is documented showing a distinctive developmental pattern for this extrusion device. Its shape and structure are related to use and load-bearing activity.

Unicellular pheromone glands of the pentatomid bugNezara viridula (Heteroptera: Insecta): Ultrastructure, classification, and proposed function

Male Nezara viridula produce sex pheromones from many independent single cells, each with a duct that opens onto the ventral abdominal surface. Despite the presence of a long duct and an associated end complex (in the form of a cupule and microvillus saccule), the structural organization of the cells that comprise the gland conform to Class 1 epidermal gland cell classification : a single cell surrounds the entire secretory complex. Each cuticular cupule contains a central bed of filaments and opens into a narrow tubular ductule that leads from the base of the cupule through the epidermis to the cuticle to open externally as a pore. The cuticle of the cupule is continuous with that of the ductule and has the appearance of three layers, although the inner (middle) layer may be a gap formed during construction of the complex. In young adult males, just molted, the ultrastructure of the cells and their inclusions indicate that they are not active. The region of the cell that is distal to the abdominal cuticle is reduced and the proximal region, surrounding the duct, is enlarged when compared with sexually mature (3-4 weeks old) adult males. At maturity the pheromone cells are enlarged distally around the cupule, but are reduced to a narrow sleeve proximally, around the ductule. Two characteristic cell profiles are evident, based on the shape of the cupule and the organelle content. Type A shows a broad opening to the cupule, an abundance of mitochondria, and few vesicular bodies. Type B has an elongated, narrow, vase-like opening to the cupule, few mitochondria, and numerous vesicular bodies. Type B cells are smaller and more abundant than Type A. Distribution within the epidermal layer also differs. It is likely that the different types represent cells producing different secretion profiles. However, the secretions retained by the standard fixation protocol within mature cells of both types look similar and appear to collect as crystalline bodies within the lumen. This may represent a common storage mechanism.

Discrepancy between antennal and behavioral responses for enantiomers of alpha-pinene: electrophysiology and behavior of Helicoverpa armigera (Lepidoptera)

The ability of adult cotton bollworm, Helicoverpa armigera (Hübner), to distinguish and respond to enantiomers of alpha-pinene was investigated with electrophysiological and behavioral methods. Electroantennogram recordings using mixtures of the enantiomers at saturating dose levels, and single unit electrophysiology, indicated that the two forms were detected by the same receptor neurons. The relative size of the electroantennogram response was higher for the (-) compared to the (+) form, indicating greater affinity for the (-) form at the level of the dendrites. Behavioral assays investigated the ability of moths to discriminate between, and respond to the (+) and (-) forms of alpha-pinene. Moths with no odor conditioning showed an innate preference for (+)-alpha-pinene. This preference displayed by naive moths was not significantly different from the preferences of moths conditioned on (+)-alpha-pinene. However, we found a significant difference in preference between moths conditioned on the (-) enantiomer compared to naive moths and moths conditioned on (+)-alpha-pinene, showing that learning plays an important role in the behavioral response. Moths are less able to distinguish between enantiomers of alpha-pinene than different odors (e.g., phenylacetaldehyde versus (-)-alpha-pinene) in learning experiments. The relevance of receptor discrimination of enantiomers and learning ability of the moths in host plant choice is discussed.

Novel Cuticular Hydrocarbons from the Cane Beetle Antitrogus parvulus4,6,8,10,16-Penta- and 4,6,8,10,16,18-HexamethyldocosanesUnprecedented anti-anti-anti-Stereochemistry in the 4,6,8,10-Methyltetrad

The major cuticular hydrocarbons from the cane beetle species Antitrogus parvulus are 4,6,8,10,16-penta- and 4,6,8,10,16,18-hexamethyldocosanes, 1 and 2, respectively. Stereoisomers of 2,4,6,8-tetramethylundecanal of established relative stereochemistry were derived from 2,4,6-trimethylphenol and were then coupled with appropriate methyl-substituted phosphoranes 62 and 25 to furnish alkenes, which on reduction provided diastereomers of 1 and 2, respectively. Capillary gas chromatography, mass spectrometry, and high resolution 13C NMR spectroscopy confirmed 1 as either 84a or 84b and 2 as either 15a or 15b. The novelty of these structures and their relative stereochemistry is briefly related to polyketide assembly.

4,6,8,10,16-penta- and 4,6,8,10,16,18-hexamethyldocosanes from the cane beetle antitrogusparvulus--cuticular hydrocarbons with unprecedented structure and stereochemistry

The major cuticular hydrocarbons from the cane beetle species Antitrogus parvulus were deduced to be 4,6,8,10,16,18-hexa- and 4,6,8,10,16-pentamethyldocosanes 2 and 3, respectively. Isomers of 2,4,6,8-tetramethylundecanal 27, 36, and 37, derived from 2,4,6-trimethylphenol, were coupled with the phosphoranes 28 and 29 to furnish alkenes and, by reduction, diastereomers of 2 and 3. Chromatographic and spectroscopic comparisons confirmed 2 as either 6a or 6b and 3 as either 34a or 34b. [structure: see text]

Mechanism of adhesion and detachment at the anterior end of Merizocotyle icopae (Monogenea: Monocotylidae) including ultrastructure of the anterior adhesive matrix

The anterior adhesive mechanism was studied for Merizocotyle icopae (Monogenea: Monocotylidae). Adult anterior apertures can open and close. In addition, duct endings terminating within the apertures are everted or retracted depending on the stage of attachment. Adhesive in adults is synthesized from all 3 secretory types (rod-shaped, small and large spheroidal bodies) found within anterior apertures. All exit together and undergo mixing to produce the adhesive matrix, a process that depletes duct contents. A greater number of ducts carrying rod-shaped bodies is depleted than ducts containing spheroidal bodies which changes the ratio of secretory types present on detachment. Detachment involves elongation of duct endings and secretion of additional matrix as the worm pulls away from the substrate. The change in secretory type ratio putatively modifies the properties of the secreted matrix enabling detachment. Only after detachment do ducts refill. During attachment, individual secretory bodies undergo morphological changes. The larval and adult adhesive matrix differs. Anterior adhesive in oncomiracidia does not show fibres with banding whereas banded fibres comprise a large part of adult adhesive. The data suggest that this is the result of adult spheroidal secretions modifying the way in which the adult adhesive matrix forms.

Mechanism of adhesion and detachment at the anterior end of Neoheterocotyle rhinobatidis and Troglocephalus rhinobatidis (Monogenea: Monopisthocotylea: Monocotylidae)

The anterior adhesion and detachment mechanisms observed for Neoheterocotyle rhinobatidis and Troglocephalus rhinobatidis (Monogenea: Monocotylidae) appear similar to those observed for the two other monopisthocotylean monogenean species with anterior apertures for which published data are available. This supports the theory that monogeneans with apertures may utilise a common mechanism. Adult anterior apertures can open and close and duct endings can evert during the adhesion phase and retract during detachment and searching behaviour. The adhesive is comprised of two secretory types, rod-shaped and spheroidal bodies, found within anterior apertures. These exit together and undergo mixing to produce the adhesive matrix in which elongate membranes from rod-shaped bodies are seen intermixed with a granular electrondense matrix. The morphology of the adhesive matrix differs from that found for some other monogenean taxa. Anterior detachment by these monocotylids appears to involve a depletion of rod-shaped bodies in ducts and mechanical withdrawal of the anterior end.

A comparison of the anterior adhesive system in the oncomiracidium and adult of the monogenean parasite Menizocotyle icopae (Monocotylidae)

The anterior adhesive system of the oncomiracidium and adult of Merizocotyle icopae (Monogenea: Monocotylidae) were compared. The oncomiracidium has one ventrally placed aperture on either side of the head near the anterior extremity. In the adult, there are three ventrally placed apertures on either side of the head region. Both systems have three types of electron-dense secretory bodies opening into each aperture. A rod-shaped secretion (S1) and a small electron dense ovoid secretion (S2) are common to larvae and adults. The third secretion type differs: in adults, it is a large, spherical (S3) type but in larvae, it is an ovoid (S4) body. S4 bodies do occur in adults, but appear to be secreted as a general body secretion. An additional anteromedian secretion (S5) is also present in the oncomiracidium, but is not secreted into the anterior apertures. Homology and function of secretions are discussed.

A suite of novel allenes from Australian melolonthine scarab beetles. Structure, synthesis, and stereochemistry

A suite of allenic hydrocarbons, previously unknown as a molecular class from insects, has been characterized from several Australian melolonthine scarab beetles. The allenes are represented by the formula CH(3)(CH(2))(n)()CH=*=CH(CH(2))(7)CH(3) with n being 11-15, 17 and 19, and thus, all have Delta(9,10)-unsaturation. These structures have been confirmed by syntheses and comparisons of spectral and chromatographic properties with those of the natural components. The enantiomers of (+/-)-Delta(9.10)-tricosadiene and Delta(9,10)-pentacosadiene were separable on a modified beta-cyclodextrin column (gas chromatography), and the natural Delta(9,10)-tricosadiene (n = 11) and Delta(9,10)-pentacosadiene (n = 13) were shown to be of >85% ee. Syntheses of nonracemic allenes of known predominating chirality were acquired using both organotin chemistry and sulfonylhydrazine intermediates, and comparisons then demonstrated that the natural allenes were predominantly (R)-configured.

Application of quantitative analytical electron microscopy to the mineral content of insect cuticle

Quantification of calcium in the cuticle of the fly larva Exeretonevra angustifrons was undertaken at the micron scale using wavelength dispersive X-ray microanalysis, analytical standards, and a full matrix correction. Calcium and phosphorus were found to be present in the exoskeleton in a ratio that indicates amorphous calcium phosphate. This was confirmed through electron diffraction of the calcium-containing tissue. Due to the pragmatic difficulties of measuring light elements, it is not uncommon in the field of entomology to neglect the use of matrix corrections when performing microanalysis of bulk insect specimens. To determine, firstly, whether such a strategy affects the outcome and secondly, which matrix correction is preferable, phi-rho (z) and ZAF matrix corrections were contrasted with each other and without matrix correction. The best estimate of the mineral phase was found to be given by using the phi-rho (z) correction. When no correction was made, the ratio of Ca to P fell outside the range for amorphous calcium phosphate, possibly leading to flawed interpretation of the mineral form when used on its own.

Preliminary characterisation and extraction of anterior adhesive secretion in monogenean (platyhelminth) parasites

Secreted anterior adhesives, used for temporary attachment to epithelial surfaces of fishes (skin and gills) by some monogenean (platyhelminth) parasites have been partially characterised. Adhesive is composed of protein. Amino acid composition has been determined for seven monopisthocotylean monogeneans. Six of these belong to the Monocotylidae and one species, Entobdella soleae (van Beneden et Hesse, 1864) Johnston, 1929, is a member of the Capsalidae. Histochemistry shows that the adhesive does not contain polysaccharides, including acid mucins, or lipids. The adhesive before secretion and in its secreted form contains no dihydroxyphenylalanine (dopa). Secreted adhesive is highly insoluble, but has a soft consistency and is mechanically removable from glass surfaces. Generally there are high levels of glycine and alanine, low levels of tyrosine and methionine, and histidine is often absent. However, amino acid content varies between species, the biggest differences evident when the monocotylid monogeneans were compared with E. soleae. Monogenean adhesive shows similarity in amino acid profile with adhesives from starfish, limpets and barnacles. However, there are some differences in individual amino acids in the temporary adhesive secretions of, on the one hand, the monogeneans and, on the other hand, the starfish and limpets. These differences may reflect the fact that monogeneans, unlike starfish and barnacles, attach to living tissue (tissue adhesion). A method of extracting unsecreted adhesive was investigated for use in further characterisation studies on monogenean glues.

Olfaction in the Queensland fruit fly, Bactrocera tryoni. II: Response spectra and temporal encoding characteristics of the carbon dioxide receptors

Single-unit electrophysiology was used to record the nerve impulses from the carbon dioxide receptors of female Queensland fruit flies, Bactroera tryoni. The receptors responded to stimulation in a phasic-tonic manner and also had a period of inhibition of the nerve impulses after the end of stimulation. at high stimulus intensities. The cell responding to carbon dioxide was presented with a range of environmental odorants and found to respond to methyl butyrate and 2-butanone. The coding characteristics of the carbon dioxide cell and the ability to detect other odorants are discussed, with particular reference to the known behavior of the fly.

Olfaction in the Queensland fruit fly, Bactrocera tryoni. I: Identification of olfactory receptor neuron types responding to environmental odors

The electroantennogram method was used to investigate the number of distinct olfactory receptor neuron types responding to a range of behaviorally active volatile chemicals in gravid Queensland fruit flies, Bactrocera tryoni. Three receptor neuron types were identified. One type responds to methyl butyrate, 2-butanone, farnesene, and carbon dioxide; a second to ethanol; and a third to n-butyric acid and ammonia. The receptor neuron type responding to methyl butyrate, 2-butanone, farnesene, and carbon dioxide consists of three subtypes. The presence of a limited number of receptor neuron types responding to a diverse set of chemicals and the reception of carbon dioxide by a receptor neuron type that responds to other odorants are novel aspects of the peripheral olfactory discrimination process.

Adhesive secretions in the Platyhelminthes

This review is the first to draw together knowledge about bioadhesives secreted by a group of parasites. Mechanisms of mechanical attachment are well known among parasites, but some can also attach to host surfaces by chemical means using a thin layer of adhesive material secreted at the parasite-host interface. Attachment by adhesives to living surfaces has not been studied in detail previously. A significant volume of research has determined much about the chemistry and nature of bioadhesives secreted by various marine macroinvertebrates from different phyla for attachment to inert substrates. Mussels and barnacles are sessile and adhere permanently, whereas starfish display temporary but firm adhesion during locomotion, feeding and burrowing. We focus on the Platyhelminthes that comprises the largely free-living Turbellaria and the wholly parasitic Monogenea, Cestoda, Digenea and Aspidogastrea. The term tissue adhesion is introduced to describe attachment by adhesives to epithelial surfaces such as fish epidermis and the lining of the vertebrate gut. These living layers regenerate rapidly, secrete mucus, are a site for immune activity and are therefore especially hostile environments for organisms that inhabit them, presenting a significant challenge for adhesion. Not all platyhelminths adhere to living surfaces and types of adhesion to inert substrates by the free-living turbellarians are also reviewed. Tissue adhesion is particularly well exemplified by monopisthocotylean monogeneans, parasites that are especially mobile as larvae, juveniles and adults on the epidermis of the body and gill surfaces of fish. These monogeneans secrete adhesives from the anterior end when they move from site to site, but some have secondarily developed adhesives at the posterior end to supplement or replace mechanical attachment by hooks and/or by suction. The temporary but tenacious anterior adhesives of monogeneans display remarkable properties of instant attachment to and detachment from their host fish surfaces. In contrast to the mobility of turbellarians and monopisthocotylean monogeneans and the simplicity of their direct life cycles, the largely endoparasitic Cestoda and Digenea are considered to be less mobile as adults. The complex cestode and digenean life cycles, involving intermediate hosts, place different demands on their various stages. Diverse, mostly anterior, gland cells in larvae, metacestodes and adults of the true tapeworms (Eucestoda), and in larval and adult Gyrocotylidea and Amphilinidea are reviewed. Conspicuous gland cells, mostly but not exclusively at the anterior end, in miracidia, cercariae and adults of digeneans and in cotylocidia and adults of aspidogastreans are also reviewed. Unlike turbellarians and monogeneans, accounts of unequivocal adhesive secretions in the Cestoda, but especially in the Digenea and Aspidogastrea, are relatively rare. The primary purpose of many conspicuous glands in the different stages of these mostly endoparasitic flatworms is for penetration into, or escape from, different hosts in their life cycle. We provide a detailed review of current knowledge about adhesion (in the sense of a thin layer of chemical material) in the Platyhelminthes including uses among eggs, larval, juvenile and adult stages. Information on structure, morphology and ultrastructure of the various adhesive systems that have been described is reviewed. Application of the 'duo gland' model is discussed. Comparisons are made between the little that is known about the chemistry of flatworm adhesives and the significant knowledge of the chemical nature of other invertebrate bioadhesives, especially those from marine macroinvertebrates. The potential importance of adhesives in parasitism is discussed. (ABSTRACT TRUNCATED)