Evaluation of remodeling and geometry on the biomechanical properties of nacreous bivalve shells

Mollusks have developed a broad diversity of shelled structures to protect against challenges imposed by biological interactions(e.g., predation) and constraints (e.g., [Formula: see text]-induced ocean acidification and wave-forces). Although the study of shell biomechanical properties with nacreous microstructure has provided understanding about the role of shell integrity and functionality on mollusk performance and survival, there are no studies, to our knowledge, that delve into the variability of these properties during the mollusk ontogeny, between both shells of bivalves or across the shell length. In this study, using as a model the intertidal mussel Perumytilus purpuratus to obtain, for the first time, the mechanical properties of its shells with nacreous microstructure; we perform uniaxial compression tests oriented in three orthogonal axes corresponding to the orthotropic directions of the shell material behavior (thickness, longitudinal, and transversal). Thus, we evaluated whether the shell material's stress and strain strength and elastic modulus showed differences in mechanical behavior in mussels of different sizes, between valves, and across the shell length. Our results showed that the biomechanical properties of the material building the P. purpuratus shells are symmetrical in both valves and homogeneous across the shell length. However, uniaxial compression tests performed across the shell thickness showed that biomechanical performance depends on the shell size (aging); and that mechanical properties such as the elastic modulus, maximum stress, and strain become degraded during ontogeny. SEM observations evidenced that compression induced a tortuous fracture with a delamination effect on the aragonite mineralogical structure of the shell. Findings suggest that P. purpuratus may become vulnerable to durophagous predators and wave forces in older stages, with implications in mussel beds ecology and biodiversity of intertidal habitats.

Mechanical adaptation of brachiopod shells via hydration-induced structural changes

The function-optimized properties of biominerals arise from the hierarchical organization of primary building blocks. Alteration of properties in response to environmental stresses generally involves time-intensive processes of resorption and reprecipitation of mineral in the underlying organic scaffold. Here, we report that the load-bearing shells of the brachiopod Discinisca tenuis are an exception to this process. These shells can dynamically modulate their mechanical properties in response to a change in environment, switching from hard and stiff when dry to malleable when hydrated within minutes. Using ptychographic X-ray tomography, electron microscopy and spectroscopy, we describe their hierarchical structure and composition as a function of hydration to understand the structural motifs that generate this adaptability. Key is a complementary set of structural modifications, starting with the swelling of an organic matrix on the micron level via nanocrystal reorganization and ending in an intercalation process on the molecular level in response to hydration.

Climate variation during the Holocene influenced the skeletal properties of Chamelea gallina shells in the North Adriatic Sea (Italy)

Understanding how marine taxa will respond to near-future climate changes is one of the main challenges for management of coastal ecosystem services. Ecological studies that investigate relationships between the environment and shell properties of commercially important marine species are commonly restricted to latitudinal gradients or small-scale laboratory experiments. This paper aimed to explore the variations in shell features and growth of the edible bivalve Chamelea gallina from the Holocene sedimentary succession to present-day thanatocoenosis of the Po Plain-Adriatic Sea system (Italy). Comparing the Holocene sub-fossil record to modern thanatocoenoses allowed obtaining an insight of shell variations dynamics on a millennial temporal scale. Five shoreface-related assemblages rich in C. gallina were considered: two from the Middle Holocene, when regional sea surface temperatures were higher than today, representing a possible analogue for the near-future global warming, one from the Late Holocene and two from the present-day. We investigated shell biometry and skeletal properties in relation to the valve length of C. gallina. Juveniles were found to be more porous than adults in all horizons. This suggested that C. gallina promoted an accelerated shell accretion with a higher porosity and lower density at the expense of mechanically fragile shells. A positive correlation between sea surface temperature and both micro-density and bulk density were found, with modern specimens being less dense, likely due to lower aragonite saturation state at lower temperature, which could ultimately increase the energetic costs of shell formation. Since no variation was observed in shell CaCO₃ polymorphism (100% aragonite) or in compositional parameters among the analyzed horizons, the observed dynamics in skeletal parameters are likely not driven by a diagenetic recrystallization of the shell mineral phase. This study contributes to understand the response of C. gallina to climate-driven environmental shifts and offers insights for assessing anthropogenic impacts on this economic relevant species.

Measuring strain in the exoskeleton of spiders-virtues and caveats

The measurement of cuticular strain during locomotion using foil strain gauges provides information both on the loads of the exoskeleton bears and the adaptive value of the specific location of natural strain detectors (slit sense organs). Here, we critically review available literature. In tethered animals, by applying loads to the metatarsus tip, strain and mechanical sensitivity (S = strain/load) induced at various sites in the tibia were determined. The loci of the lyriform organs close to the tibia-metatarsus joint did not stand out by high strain. The strains induced at various sites during free locomotion can be interpreted based on S and, beyond the joint region, on beam theory. Spiders avoided laterad loading of the tibia-metatarsus joint during slow locomotion. Balancing body weight, joint flexors caused compressive strain at the posterior and dorsal tibia. While climbing upside down strain measurements indicate strong flexor activity. In future studies, a precise calculation and quantitative determination of strain at the sites of the lyriform organs will profit from more detailed data on the overall strain distribution, morphology, and material properties. The values and caveats of the strain gauge technology, the only one applicable to freely moving spiders, are discussed.

Two fatty acid synthase genes from the integument contribute to cuticular hydrocarbon biosynthesis and cuticle permeability in Locusta migratoria

Lipids of the insect cuticle have important roles in resistance against the arid environment and invasion of foreign substances. Fatty acid synthase (FAS) is an important enzyme of the insect lipid synthesis pathway. In the present study, we identified three FAS genes from transcriptome data of the migratory locust, Locusta migratoria, based on bioinformatics analyses. Among them, two FAS genes (LmFAS1 and LmFAS3) are highly expressed in the integument of fifth instar nymphs. Suppression of LmFAS1 and LmFAS3 by RNA interference caused lethality during ecdysis or shortly after moulting. The weight of the locusts and the content of lipid droplets were reduced compared with those of the control. The results of gas chromatography-mass spectrometry analysis showed that knockdown of LmFAS3 led to a decrease of both cuticular hydrocarbons and inner hydrocarbons (CHCs and IHCs) contents, especially the content of methyl branched hydrocarbons. By contrast, knockdown of LmFAS1 only resulted in a decrease in the IHC content, but not that of CHCs. By consequence, in LmFAS1- and LmFAS3-suppressed locusts, hydrocarbon deficiency reduced desiccation resistance and enhanced cuticle permeability and sensitivity to insecticides. These results indicate that LmFAS1 and LmFAS3 are essential for hydrocarbon production and cuticle permeability, which play influential roles in waterproofing the insect cuticle.

The fatty acid elongase gene LmELO7 is required for hydrocarbon biosynthesis and cuticle permeability in the migratory locust, Locusta migratoria

Insect cuticular lipids are a complex cocktail of highly diverse cuticular hydrocarbons (CHCs), which form a hydrophobic surface coat to maintain water balance and to prevent desiccation and penetration of exogenous substances. Fatty acid elongases (ELOs) are key enzymes that participate in a common CHC synthesis pathway in insects. However, the importance of ELOs for CHC synthesis and function remains understudied. Using transcriptomic data, we have identified seven ELO genes (LmELO1-7) in the migratory locust Locusta migratoria. We determined their tissue-specific and temporal expression profiles in fifth instar nymphs. As we are interested in cuticle barrier formation, we performed RNA interference against LmELO7, which is mainly expressed in the integument. Suppression of LmELO7 significantly decreased its expression and caused lethality during or shortly after molting. CHC quantification by GC-MS analysis indicated that suppression of LmELO7 resulted in a decrease in total CHC amounts. By consequence, CHC deficiency reduced desiccation resistance and enhanced cuticle permeability in LmELO7-suppressed L. migratoria. Interestingly, LmELO7 expression is induced at low air humidity. Our results indicate that LmELO7 plays a vital role in the production of CHCs and, hence, cuticle permeability. Induction of LmELO7 expression in drought conditions suggests a key role of this gene in regulating desiccation resistance. This work is expected to help developing new strategies for insect pest management based on CHC function.

Acoustic behaviour of male European lobsters (Homarus gammarus) during agonistic encounters

Previous studies have demonstrated that male European lobsters (Homarus gammarus) use chemical and visual signals as a means of intraspecific communication during agonistic encounters. In this study, we show that they also produce buzzing sounds during these encounters. This result was missed in earlier studies because low-frequency buzzing sounds are highly attenuated in tanks, and are thus difficult to detect with hydrophones. To address this issue, we designed a behavioural tank experiment using hydrophones, with accelerometers placed on the lobsters to directly detect their carapace vibrations (i.e. the sources of the buzzing sounds). While we found that both dominant and submissive individuals produced carapace vibrations during every agonistic encounter, very few of the associated buzzing sounds (15%) were recorded by the hydrophones. This difference is explained by their high attenuation in tanks. We then used the method of algorithmic complexity to analyse the carapace vibration sequences as call-and-response signals between dominant and submissive individuals. Even though some intriguing patterns appeared for closely size-matched pairs (<5 mm carapace length difference), the results of the analysis did not permit us to infer that the processes underlying these sequences could be differentiated from random ones. Thus, such results prevented any conclusions about acoustic communication. This concurs with both the high attenuation of the buzzing sounds during the experiments and the poor understanding of acoustic perception by lobsters. New approaches that circumvent tank acoustic issues are now required to validate the existence of acoustic communication in lobsters.

Gene functions in adult cuticle pigmentation of the yellow mealworm, Tenebrio molitor

In many arthropod species including insects, the cuticle tanning pathway for both pigmentation and sclerotization begins with tyrosine and is responsible for production of both melanin- and quinoid-type pigments, some of which are major pigments for body coloration. In this study we identified and cloned cDNAs of the yellow mealworm, Tenebrio molitor, encoding seven key enzymes involved in this pathway including tyrosine hydroxylase (TmTH), DOPA decarboxylase (TmDDC), laccase 2 (TmLac2), Yellow-y (TmY-y), arylalkylamine N-acetyltransferase (TmAANAT1), aspartate 1-decarboxylase (TmADC) and N-β-alanyldopamine synthase (Tmebony). Expression profiles of these genes during development were analyzed by real-time PCR, revealing development-specific patterns of expression. Loss of function mediated by RNAi of either 1) TmTH or TmLac2, 2) TmDDC or TmY-y, and 3) TmAANAT1, TmADC or Tmebony resulted in pale/white, light yellow/brown and dark/black adult body coloration, respectively. In addition, there are three distinct layer/regional pigmentation differences in rigid types of adult cuticle, a brownish outer exocuticle (EX), a dark pigmented middle mesocuticle (ME) and a transparent inner endocuticle (EN). Decreases in pigmentation of the EX and/or ME layers were observed after RNAi of TmDDC or TmY-y. In TmADC- or Tmebony-deficient adults, a darker pigmented EX layer was observed. In TmAANAT1-deficient adults, trabeculae formed between the dorsal and ventral elytral cuticles as well as the transparent EN layer became highly pigmented. These results demonstrate that knocking down the level of gene expression of specific enzymes of this tyrosine metabolic pathway leads to abnormal pigmentation in individual layers and substructure of the rigid adult exoskeleton of T. molitor.

Testing Species Assignments in Extant Terebratulide Brachiopods: A Three-dimensional Geometric Morphometric Analysis of Long-Looped Brachidia

Species of terebratulide brachiopods have been largely characterized qualitatively on the basis of morphology. Furthermore, species-level morphological variability has rarely been analyzed within a quantitative framework. The objective of our research is to quantify morphological variation to test the validity of extant named species of terebratulide brachiopods, focusing on the lophophore-supporting structures—the “long loops.” Long loops are the most distinctive and complex morphological feature in terebratellidine brachiopods and are considered to be phylogenetically and taxonomically informative. We studied eight species with problematic species identities in three genera distributed in the North Pacific: Laqueus, Terebratalia, and Dallinella. Given how geometrically complex long loops are, we generated 3D models from computed tomography (CT) scans of specimens of these eight species and analyzed them using 3D geometric morphometrics. Our goal was to determine ranges of variation and to test whether species are clearly distinguishable from one another in morphospace and statistically. Previous studies have suggested that some species might be overly split and are indistinguishable. Our results show that these extant species of terebratellidines can be reliably distinguished on the basis of quantitative loop morphometrics. Using 3D geometric morphometric methods, we demonstrate the utility of CT beyond purely descriptive imaging purposes in testing the morphometric validity of named species. It is crucial to treat species described and named from qualitative morphology as working hypotheses to be tested; many macroevolutionary studies depend upon the accurate assessment of species in order to identify and seek to explain macroevolutionary patterns. Our results provide quantitative documentation of the distinction of these species and thus engender greater confidence in their use to characterize macroevolutionary patterns among extant terebratellidine brachiopods. These methods, however, require further testing in extinct terebratellidines, which only rarely preserve the delicate long loop in three dimensions. In addition, molecular analyses of extant terebratellidines will test the species delimitations supported by the morphometric analyses presented in this study. [Species determination; morphological variability; 3D geometric morphometrics; terebratulide brachiopods; long loops.]

Behavioural Responses of Unio tumidus Freshwater Mussels to Pesticide Contamination

A pesticide is a chemical substance used for the disposal of pests, such as insects, weeds, invertebrates, or rodents. Pesticides interfere with the normal metabolism of the target species; however, some of them may inadvertently affect organisms other than those targeted. Increased quantities of pesticides in water disturb various ecological processes and may increase the mortality rate of various native species of flora and fauna. One of the groups of organisms that are at the greatest risk from the adverse effects of pesticides is the bivalves. This study was designed to assess the behavioural reaction of bivalves to widespread pesticides. As a representative example, the Polish native Unio tumidus (Philipsson 1788) was used. The study investigated different groups of toxic pesticides, such as herbicides (lenacil), insecticides (thiacloprid, DDT and dichlorvos), and fungicides (tebuconazole), in concentrations of 10 mg L^-1. The results showed various behavioural reactions of bivalves to the pesticides. The most evident were activity time and shell opening rate. Moreover, as a result of DDVP contamination, effects were recorded in terms of shell opening level as well as rapid onset of death. Among the five analysed plant protection products, the most toxic was DDVP. Its presence caused adductor muscle paralysis in all analysed individuals. The least toxic pesticides were DDT and thiacloprid. A strong reaction to lenacil was observed especially in the shell opening rate. Tebuconazole caused significant reductions in activity. Despite the fact that the impact of pesticides on ecosystems is under regular observation, with the use of a wide range of scientific techniques, the use of bivalves was shown to have considerable potential for water quality monitoring.

Potential nitrous oxide production by marine shellfish in response to warming and nutrient enrichment

Bivalves facilitate microbial nitrogen cycling, which can produce nitrous oxide (N2O), a potent greenhouse gas. Potential N₂O production by three marine bivalves (Mytilus edulis, Mercenaria mercenaria and Crassostrea virginica) was measured in the laboratory including responses to nitrogen (N) loading and/or warming over short-terms (up to 14 or 28 days). N additions (targeting 100 μM-N ammonium nitrate) or warming (22 °C) individually and in combination were applied with experimental controls (20 μM-N, 19 °C). N₂O production rates were higher with N additions for all species, but warming lacked significant direct effects. Ammonium and nitrate concentrations varied but were consistent with nitrification as a potential N₂O source for all bivalves. Highest N₂O emissions (7.5 nmol N₂O g^-1 h^-1) were from M. edulis under hypoxic conditions coincident with a drop in pH. Macro-epifauna on M. edulis did not significantly alter N₂O production. Thus, under short-term hypoxic conditions, micro-organisms in M. edulis guts may be a particularly significant source of N₂O.

Macro-to-nanoscale investigation of wall-plate joints in the acorn barnacle Semibalanus balanoides: correlative imaging, biological form and function, and bioinspiration

Correlative imaging combines information from multiple modalities (physical-chemical-mechanical properties) at various length scales (centimetre to nanometre) to understand the complex biological materials across dimensions (2D-3D). Here, we have used numerous coupled systems: X-ray microscopy (XRM), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), optical light microscopy (LM) and focused ion beam (FIB-SEM) microscopy to ascertain the microstructural and crystallographic properties of the wall-plate joints in the barnacle Semibalanus balanoides. The exoskeleton is composed of six interlocking wall plates, and the interlocks between neighbouring plates (alae) allow barnacles to expand and grow while remaining sealed and structurally strong. Our results indicate that the ala contain functionally graded orientations and microstructures in their crystallography, which has implications for naturally functioning microstructures, potential natural strengthening and preferred oriented biomineralization. Elongated grains at the outer edge of the ala are oriented perpendicularly to the contact surface, and the c-axis rotates with the radius of the ala. Additionally, we identify for the first time three-dimensional nanoscale ala pore networks revealing that the pores are only visible at the tip of the ala and that pore thickening occurs on the inside (soft bodied) edge of the plates. The pore networks appear to have the same orientation as the oriented crystallography, and we deduce that the pore networks are probably organic channels and pockets, which are involved with the biomineralization process. Understanding these multiscale features contributes towards an understanding of the structural architecture in barnacles, but also their consideration for bioinspiration of human-made materials. The work demonstrates that correlative methods spanning different length scales, dimensions and modes enable the extension of the structure-property relationships in materials to form and function of organisms.

A computational framework for the morpho-elastic development of molluskan shells by surface and volume growth

Mollusk shells are an ideal model system for understanding the morpho-elastic basis of morphological evolution of invertebrates’ exoskeletons. During the formation of the shell, the mantle tissue secretes proteins and minerals that calcify to form a new incremental layer of the exoskeleton. Most of the existing literature on the morphology of mollusks is descriptive. The mathematical understanding of the underlying coupling between pre-existing shell morphology, de novo surface deposition and morpho-elastic volume growth is at a nascent stage, primarily limited to reduced geometric representations. Here, we propose a general, three-dimensional computational framework coupling pre-existing morphology, incremental surface growth by accretion, and morpho-elastic volume growth. We exercise this framework by applying it to explain the stepwise morphogenesis of seashells during growth: new material surfaces are laid down by accretive growth on the mantle whose form is determined by its morpho-elastic growth. Calcification of the newest surfaces extends the shell as well as creates a new scaffold that constrains the next growth step. We study the effects of surface and volumetric growth rates, and of previously deposited shell geometries on the resulting modes of mantle deformation, and therefore of the developing shell’s morphology. Connections are made to a range of complex shells ornamentations.

Molluska are the second most diversified phylum of the animal kingdom, and their evolutionary success can be partly attributed to the hard shell that provides both protection and support to the soft body. The distinctive anatomical features of these hard shells are their rich pigmentation patterns and complex structural ornamentations. While the pigmentation patterns are primarily of biochemical origin, the ornamentations result from mechanical deformation of the mantle due to growth induced forces. This mechanical basis of “growth and form” has been previously investigated using simplified morpho-mechanical models, but restricted to reduced geometric representations. Here we propose a three-dimensional computational framework coupling morphology, incremental surface growth by accretion, and morpho-elastic volume growth, to enable an improved representation of the growth and structural parameters controlling the evolution of these ornamentations. We study the effects of growth rates, and of previously deposited shell geometries on the resulting modes of mantle deformation, and present a “phase diagram” of morphogenesis in molluskan shells. Our main motivation for focusing on generic physical processes involved in development is that they may shape living beings in a predictive way and partly determine the spectrum of forms that have been and could have been generated during evolution.

From the raw bar to the bench: Bivalves as models for human health

Bivalves, from raw oysters to steamed clams, are popular choices among seafood lovers and once limited to the coastal areas. The rapid growth of the aquaculture industry and improvement in the preservation and transport of seafood have enabled them to be readily available anywhere in the world. Over the years, oysters, mussels, scallops, and clams have been the focus of research for improving the production, managing resources, and investigating basic biological and ecological questions. During this decade, an impressive amount of information using high-throughput genomic, transcriptomic and proteomic technologies has been produced in various classes of the Mollusca group, and it is anticipated that basic and applied research will significantly benefit from this resource. One aspect that is also taking momentum is the use of bivalves as a model system for human health. In this review, we highlight some of the aspects of the biology of bivalves that have direct implications in human health including the shell formation, stem cells and cell differentiation, the ability to fight opportunistic and specific pathogens in the absence of adaptive immunity, as source of alternative drugs, mucosal immunity and, microbiome turnover, toxicology, and cancer research. There is still a long way to go; however, the next time you order a dozen oysters at your favorite raw bar, think about a tasty model organism that will not only please your palate but also help unlock multiple aspects of molluscan biology and improve human health.

Bending and branching of calcite laths in the foliated microstructure of pectinoidean bivalves occurs at coherent crystal lattice orientation

Foliated calcite is widely employed by some important pteriomorph bivalve groups as a construction material. It is made from calcite laths, which are inclined at a low angle to the internal shell surface, although their arrangement is different among the different groups. They are strictly ordered into folia in the anomiids, fully independent in scallops, and display an intermediate arrangement in oysters. Pectinids have particularly narrow laths characterized by their ability to change their growth direction by bending or winding, as well as to bifurcate and polyfurcate. Electron backscatter analysis indicates that the c-axes of laths are at a high, though variable, angle to the growth direction, and that the laths grow preferentially along the projection of an intermediate axis between two a-axes, although they can grow in any intermediate direction. Their main surfaces are not particular crystallographic faces. Analyses done directly on the lath surfaces demonstrate that, during the bending/branching events, all crystallographic axes remain invariant. The growth flexibility of pectinid laths makes them an excellent space-filling material, well suited to level off small irregularities of the shell growth surface. We hypothesize that the exceptional ability of laths to change their direction may be promoted by the mode of growth of biogenic calcite, from a precursor liquid phase induced by organic molecules.

Genome-wide identification, characterization and expression analysis of the MITF gene in Yesso scallops (Patinopecten yessoensis) with different shell colors

The microphthalmia-associated transcription factor (MITF) is the center of the regulator network of melanin synthesis in vertebrates. However, the role of MITF in shell color formation is poorly studied in mollusks. In the present study, an MITF gene, PyMITF, was first identified at the whole-genome level in Yesso scallop (Patinopecten yessoensis), an evolutionarily and economically important species, the shell color of which shows polymorphism. The PyMITF is a large gene spanning ~37 kb in the genome with 7 introns and 8 exons. A basic helix-loop-helix leucine zipper (bHLH-LZ) domain was detected in the PyMITF protein sequence, which can bind the canonical E-box sequence in the promoter region of the downstream genes. Phylogenetic analysis of the MITFs among vertebrates and invertebrates revealed that the molecular evolution of MITFs was consistent with the species taxonomy. Different expression levels of PyMITF were detected among different shell color strains, indicating the important role of PyMITF involved in shell pigmentation. Besides, PyMITF was expressed at a significantly higher level in the central mantle than that in the edge mantle, proving the participation of the central mantle in shell color formation in molecular level for the first time. The work provides valuable information for the molecular mechanism study of shell color formation.

A comparison of the cuticular properties of the female ticks Ixodes pacificus and Amblyomma hebraeum (Acari: Ixodidae) throughout the feeding period

The mechanical properties of the cuticle of Ixodes pacificus (Ip) are compared to those of Amblyomma hebraeum (Ah) from our earlier work. The 10-fold size difference between the species is expected to lead to significant differences in mechanical properties, because cuticular stretch depends on high internal hydrostatic pressure during the rapid phase of engorgement. We demonstrate here: (1) The cuticle of partially fed Ip is less stiff and viscous than that of Ah. (2) A stretch-recoil cycle in both ticks consists of recoverable deformation (ESv) and permanent deformation (ESp); ESp is higher in Ip, and increases sharply during the slow phase of engorgement, but not in Ah. (3) Injected dopamine (DA) increases ESp and reduces all measures of stiffness and viscosity, suggesting that a catecholaminergic neurotransmitter plays a fundamental role in modulating mechanical properties of the cuticle. However, unlike Ah, DA's effect was not different from that of the control (1.2% NaCl). Mere insertion of the needle may have punctured the gut, causing the release of perhaps a catecholamine that increases ESp, an hypothesis supported by the fact that inserting a needle without any injection also caused an increase in ESp. (4) Stretch reduces ESp, but subjecting loops to pH 6.5 in vitro restores it. (5) Despite the smaller size of Ip, later onset of the rapid phase of engorgement, a thinner cuticle and different mechanical properties all reduce the internal pressure needed for stretch.

Effects of Shape and Orientation of Pore Canals on Mechanical Behaviors of Lobster Cuticles

The work is to investigate the relationships between the microstructures and mechanical behaviors of lobster cuticles and reveal the inner mechanisms of the anisotropic mechanical properties of the cuticles and give the helpful guidance for the design of high-performance man-made composites. First, the tensile mechanical properties of the longitudinal and transverse specimens of the cuticles of American lobsters were tested with a mechanical-testing instrument. It is was found that the fracture strength and elastic modulus of the longitudinal specimens are distinctly larger than those of the transverse specimens. Then, the microstructural characteristics of the fracture surfaces of the specimens were observed with scanning electron microscope. It was observed that the pore canals in the cuticles are elliptic and their orientations are along the longitudinal orientation of the cuticles. Furthermore, the stresses and micro-damage of the longitudinal and transverse specimens were calculated with the rule of progressive damage by finite element method. It was revealed that the shape and orientation of the pore canals in the cuticles give rise to the anisotropic mechanical property of the cuticles and ensure that the cuticles possess the largest fracture strength and elastic modulus along their largest main-stress orientation.

The influence of habitat preferences on shell morphology in ecophenotypes of Trochulus hispidus complex

Trochulus hispidus and T. sericeus are hairy snails widely distributed in Europe. They differ in shell morphology and are usually found in various land habitats. However, their morphology does not match genetic distance as they do not form distinct clades. Therefore, it is interesting to determine to what extent environmental factors can control their phenotypes. We analysed the morphological traits and many environmental features of their habitats to find relationships between these parameters and explain ecological reasons for this plasticity. We found many statistically significant correlations between morphological traits and environmental variables. Illumination, forestation, precipitation and temperature occurred the most important features discriminating habitats of these snails. It turned out that T. sericeus prefers forests and moist shaded places, while T. hispidus chooses more dry habitats and open areas exposed to the sun. T. sericeus is also probably more tolerant to low and variable temperatures. The hair durability is also correlated with their habitats: the shell of T. hispidus is mostly hairless but hairs almost always cover the shell of T. sericeus. These results support the hypothesis that the lack of hairs is associated with the loss of a potential adaptive function due to the change from wet to dry habitats. The hairs facilitate the adherence of snails to herbaceous plants during feeding when the humidity levels are high. The morphological divergence of T. hispidus and T. sericeus is the result of phenotypic plasticity and selection associated with the habitat, which affect both the shell shape and the hair durability. Since T. hispidus and T. sericeus do to not represent separate biological species and their variability has no genetic basis, they should be considered as ecophenotypes. This and our previous studies suggest that phenotypic plasticity in widely distributed Trochulus species is quite common and may have been of ancestral origin.

D1 dopamine receptor is involved in shell formation in larvae of Pacific oyster Crassostrea gigas

Dopamine (DA), a significant member of catecholamines, is reported to induce biomineralization of calcium carbonate vaterite microspheres via dopamine receptor (DR) in bivalves, implying the modulation of dopaminergic system on shell formation during larval development. In this research, a homologue of D1 type DR (CgD1DR-1) was identified from oyster Crassostrea gigas, whose full length cDNA was 1197 bp. It was widely expressed in various tissues of C. gigas, with the significantly higher levels in hepatopancreas, mantle, muscle and gill. During developmental stages, the mRNA transcripts of CgD1DR-1 in D-shape larvae were obviously higher (p < 0.05) than those in trochophore and umbo larvae, and CO₂ exposure could inhibit the synthesis of DA and mRNA expression of CgD1DR-1. After cell transfection and DA treatment, intracellular cAMP in cells with the expression of CgD1DR-1 increased significantly (p < 0.05). Furthermore, the incubation with SCH 23390 for the blockage of CgD1DR-1 significantly restrained the expressions of six shell formation-related genes including CgTyrosinase-1, CgTyrosinase-3, CgChitinaseLP, CgAMC, CgBMP and CgBMPR in trochophore and D-shape larvae. These results jointly suggested that DA together with its receptor CgD1DR-1 might be involved in shell formation during oyster larval development from trochophore to D-shape larvae, and CO₂-induced ocean acidification (OA) might influence marine bivalves by inhibiting the DA-D1DR pathway to prohibit their shell formation.

Optimal age of the donor graft tissue in relation to cultured pearl phenotypes in the mollusc, Pinctada margaritifera

Ageing is defined as the progressive decline in tissue and organ functions over time. This study aims to evaluate the ageing effect on cultured pearl quality phenotypes (including size and quality traits) in the graft-recipient animal model: Pinctada margaritifera. For this, eight uniform grafting experiments were designed using two hatchery-produced pearl oyster families as donors, which were followed through time, between 7 and 30 months in age. For each age category, 20 donors were studied for each culture site giving a total of 2400 grafted oysters. Several phenotypic measurements were made: 1) donor family growth performance from shell size records, 2) pearl size and corresponding quality traits, and 3) expression of some genes related to biomineralization processes on both the mantle graft and on pearl sac tissues. Results showed that: 1) donor age has an impact on pearl size, with grafts coming from the youngest donors yielding the biggest pearls; and 2) grafts from donors between 12 and 18 months in age produced pearls of the highest quality (grade and surface quality), a result supported by an analysis where the level of expression for a panel of genes associated with biomineralization was greatest in donors within the 12 to 18 months age group. These results indicate that donors aged between 12 and 18 months have high potential for biomineralisation and nacre deposition, and likely produce larger and higher quality cultured pearls than older donors.

Armours for soft bodies: how far can bioinspiration take us?

The development of armour is as old as the dawn of civilization. Early man looked to natural structures to harvest or replicate for protection, leaning on millennia of evolutionary developments in natural protection. Since the advent of more modern weaponry, Armor development has seemingly been driven more by materials research than bio-inspiration. However, parallels can still be drawn between modern bullet-protective armours and natural defensive structures. Soft armour for handgun and fragmentation threats can be likened to mammalian skin, and similarly, hard armour can be compared with exoskeletons and turtle shells. Via bio-inspiration, it may be possible to develop structures previously un-researched for ballistic protection. This review will cover current modern ballistic protective structures focusing on energy dissipation and absorption methods, and their natural analogues. As all armour is a compromise between weight, flexibility and protection, the imbricated structure of scaled skin will be presented as a better balance between these factors.

A cuticle protein from the Pacific white shrimp Litopenaeus vannamei involved in WSSV infection

White spot syndrome virus (WSSV) is a major viral pathogen in global shrimp farming, causing huge economic damage. Through penetrating the outer surface of the target tissues, WSSV enters into the cells of the target tissue to complete the replication process in the host. In the present study, a cuticle protein gene from Litopenaeus vannamei, designated as LvAMP13.4, was identified and proved to be involved in WSSV invasion. The deduced amino acid sequence of LvAMP13.4 contained a signal peptide and a conserved chitin-binding domain type 4 (ChBD4). This cuticle protein gene was mainly expressed in stomach, gill and epidermis. The expression level of LvAMP13.4 was significantly changed during WSSV infection. Silencing of LvAMP13.4 by dsRNA interference apparently reduced the mortality rate and the WSSV copy number in shrimp upon WSSV infection. Furthermore, yeast two-hybrid system and Co-IP assay were performed to confirm that LvAMP13.4 could interact with the major envelop protein VP24 of WSSV. These data indicated that LvAMP13.4 was involved in the invasion process of WSSV through interaction with VP24. The present results could provide new insights for us in understanding the role of host cuticle proteins during virus invasion.

Influence of water temperature and food on the last stages of cultured pearl mineralization from the black-lip pearl oyster Pinctada margaritifera

Environmental parameters, such as food level and water temperature, have been shown to be major factors influencing pearl oyster shell growth and molecular mechanisms involved in this biomineralization process. The present study investigates the effect of food level (i.e., microalgal concentration) and water temperature, in laboratory controlled conditions, on the last stages of pearl mineralization in order to assess their impact on pearl quality. To this end, grafted pearl oysters were fed at different levels of food and subjected to different water temperatures one month prior to harvest to evaluate the effect of these factors on 1) pearl and shell deposition rate, 2) expression of genes involved in biomineralization in pearl sacs, 3) nacre ultrastructure (tablet thickness and number of tablets deposited per day) and 4) pearl quality traits. Our results revealed that high water temperature stimulates both shell and pearl deposition rates. However, low water temperature led to thinner nacre tablets, a lower number of tablets deposited per day and impacted pearl quality with better luster and fewer defects. Conversely, the two tested food level had no significant effects on shell and pearl growth, pearl nacre ultrastructure or pearl quality. However, one gene, Aspein, was significantly downregulated in high food levels. These results will be helpful for the pearl industry. A wise strategy to increase pearl quality would be to rear pearl oysters at a high water temperature to increase pearl growth and consequently pearl size; and to harvest pearls after a period of low water temperature to enhance luster and to reduce the number of defects.

Effects of ocean acidification with pCO2 diurnal fluctuations on survival and larval shell formation of Ezo abalone, Haliotis discus hannai

This study assessed the effects of constant and diurnally fluctuating pCO₂ on development and shell formation of larval abalone Haliotis discus hannai. The larvae was exposed to different pCO₂ conditions; constant [450, 800, or 1200 μatm in the first experiment (Exp. I), 450 or 780 μatm in the second experiment (Exp. II)] or diurnally fluctuating pCO₂ (800 ± 400 or 1200 ± 400 μatm in Exp. I, 450 ± 80, 780 ± 200 or 780 ± 400 μatm in Exp. II). Mortality, malformation rates or shell length of larval abalone were not significantly different among the 450, 800, and 800 ± 400 μatm pCO₂ treatments. Meanwhile, significantly higher malformation rates and smaller shells were detected in the 1200 and 1200 ± 400 μatm pCO₂ treatments than in the 450 μatm pCO₂ treatment. The negative impacts were greater in the 1200 ± 400 μatm than in the 1200 μatm. Shell length and malformation rate of larval abalone were related with aragonite saturation state (Ω-aragonite) in experimental seawater, and greatly changed around 1.1 of Ω-aragonite which corresponded to 1000-1300 μatm pCO₂. These results indicate that there is a pCO₂ threshold associated with Ω-aragonite in the seawater, and that pCO₂ fluctuations produce additional negative impacts on abalone when above the threshold. Clear relationships were detected between abalone fitness and the integrated pCO₂ value over the threshold, indicating that the effects of OA on development and shell formation of larval abalone can be determined by intensity and time of exposure to pCO₂ over the threshold.

Curvature-Induced Instabilities of Shells

Induced by proteins within the cell membrane or by differential growth, heating, or swelling, spontaneous curvatures can drastically affect the morphology of thin bodies and induce mechanical instabilities. Yet, the interaction of spontaneous curvature and geometric frustration in curved shells remains poorly understood. Via a combination of precision experiments on elastomeric spherical shells, simulations, and theory, we show how a spontaneous curvature induces a rotational symmetry-breaking buckling as well as a snapping instability reminiscent of the Venus fly trap closure mechanism. The instabilities, and their dependence on geometry, are rationalized by reducing the spontaneous curvature to an effective mechanical load. This formulation reveals a combined pressurelike term in the bulk and a torquelike term in the boundary, allowing scaling predictions for the instabilities that are in excellent agreement with experiments and simulations. Moreover, the effective pressure analogy suggests a curvature-induced subcritical buckling in closed shells. We determine the critical buckling curvature via a linear stability analysis that accounts for the combination of residual membrane and bending stresses. The prominent role of geometry in our findings suggests the applicability of the results over a wide range of scales.

Biomechanical properties of predator-induced body armour in the freshwater crustacean Daphnia

The freshwater crustacean Daphnia is known for its ability to develop inducible morphological defences that thwart predators. These defences are developed only in the presence of predators and are realized as morphological shape alterations e.g. 'neckteeth' in D. pulex and 'crests' in D. longicephala. Both are discussed to hamper capture, handling or consumption by interfering with the predator's prey capture devices. Additionally, D. pulex and some other daphniids were found to armour-up and develop structural alterations resulting in increased carapace stiffness. We used scanning transmission electron microscopy (STEM) and confocal laser scanning microscopy (CLSM) to identify predator-induced structural and shape alterations. We found species specific structural changes accompanying the known shape alterations. The cuticle becomes highly laminated (i.e. an increased number of layers) in both species during predator exposure. Using nano- and micro-indentation as well as finite element analysis (FEA) we determined both: the structure's and shape's contribution to the carapace's mechanical resistance. From our results we conclude that only structural alterations are responsible for increased carapace stiffness, whereas shape alterations appear to pose handling difficulties during prey capture. Therefore, these defences act independently at different stages during predation.

Co-Option and De Novo Gene Evolution Underlie Molluscan Shell Diversity

Molluscs fabricate shells of incredible diversity and complexity by localized secretions from the dorsal epithelium of the mantle. Although distantly related molluscs express remarkably different secreted gene products, it remains unclear if the evolution of shell structure and pattern is underpinned by the differential co-option of conserved genes or the integration of lineage-specific genes into the mantle regulatory program. To address this, we compare the mantle transcriptomes of 11 bivalves and gastropods of varying relatedness. We find that each species, including four Pinctada (pearl oyster) species that diverged within the last 20 Ma, expresses a unique mantle secretome. Lineage- or species-specific genes comprise a large proportion of each species’ mantle secretome. A majority of these secreted proteins have unique domain architectures that include repetitive, low complexity domains (RLCDs), which evolve rapidly, and have a proclivity to expand, contract and rearrange in the genome. There are also a large number of secretome genes expressed in the mantle that arose before the origin of gastropods and bivalves. Each species expresses a unique set of these more ancient genes consistent with their independent co-option into these mantle gene regulatory networks. From this analysis, we infer lineage-specific secretomes underlie shell diversity, and include both rapidly evolving RLCD-containing proteins, and the continual recruitment and loss of both ancient and recently evolved genes into the periphery of the regulatory network controlling gene expression in the mantle epithelium.

Beetle Exoskeleton May Facilitate Body Heat Acting Differentially across the Electromagnetic Spectrum

Exoskeletons of beetles and their associated morphological characteristics can serve many different functions, including thermoregulation. We study the thermal role of the exoskeleton in 13 Geotrupidae dung beetle species using heating experiments under controlled conditions. The main purpose was to measure the influence of heating sources (solar radiance vs. infrared), animal position (dorsal exposure vs. ventral exposure), species identity, and phylogenetic relationships on internal asymptotic temperatures and heating rates. The thermal response was significantly influenced by phylogenetic relatedness, although it was not affected by the apterous condition. The asymptotic internal temperature of specimens was not affected by the thoracic volume but was significantly higher under simulated sunlight conditions than under infrared radiation and when exposed dorsally as opposed to ventrally. There was thus a significant interaction between heating source and body position. Heating rate was negatively and significantly influenced by thoracic volume, and, although insignificantly slower under simulated sunlight, it was significantly affected by body position, being faster under dorsal exposure. The results constitute the first evidence supporting the hypothesis that the beetle exoskeleton acts differentially across the electromagnetic spectrum determining internal body temperatures. This interesting finding suggests the existence of a kind of passive physiology imposed by the exoskeleton and body size, where interspecific relationships play a minor role.

Ocean acidification adversely influences metabolism, extracellular pH and calcification of an economically important marine bivalve, Tegillarca granosa

Oceanic uptake of CO₂ from the atmosphere has significantly reduced surface seawater pH and altered the carbonate chemistry within, leading to global Ocean Acidification (OA). The blood clam, Tegillarca granosa, is an economically and ecologically significant marine bivalve that is widely distributed along the coastal and estuarine areas of Asia. To investigate the physiological responses to OA, blood clams were exposed to ambient and three reduced seawater pH levels (8.1, 7.8, 7.6 and 7.4) for 40 days, respectively. Results obtained suggest that OA suppresses the feeding activity and aerobic metabolism, but elevates proteins catabolism of blood clams. OA also causes extracellular acidosis and decreases haemolymph Ca²⁺ concentration. In addition, our data also suggest that OA impairs the calcification process and inner shell surface integrity. Overall, OA adversely influences metabolism, acid-base status and calcification of blood clams, subsequently leading to a decrease in the fitness of this marine bivalve species.

Diversity of Cuticular Micro- and Nanostructures on Insects: Properties, Functions, and Potential Applications

Insects exhibit a fascinating and diverse range of micro- and nanoarchitectures on their cuticle. Beyond the spectacular beauty of such minute structures lie surfaces evolutionarily modified to act as multifunctional interfaces that must contend with a hostile, challenging environment, driving adaption so that these can then become favorable. Numerous cuticular structures have been discovered this century; and of equal importance are the properties, functions, and potential applications that have been a key focus in many recent studies. The vast range of insect structuring, from the most simplistic topographies to the most elegant and geometrically complex forms, affords us with an exhaustive library of natural templates and free technologies to borrow, replicate, and employ for a range of applications. Of particular importance are structures that imbue cuticle with antiwetting properties, self-cleaning abilities, antireflection, enhanced color, adhesion, and antimicrobial and specific cell-attachment properties.

Exoskeletal cuticle of cavernicolous and epigean terrestrial isopods: A review and perspectives

Comparative ultrastructural studies of the integument in terrestrial isopod crustaceans show that specific environmental adaptations of different eco-morphotypes are reflected in cuticle structure. The biphasic molting in isopods is a valuable experimental model for studies of cuticular matrix secretion and degradation in the same animal. The aim of this review is to show structural and functional adaptations of the tergal cuticle in terrestrial isopods inhabiting cave habitats. Exoskeletal cuticle thickness, the number of cuticular layers, epicuticle structure, mineralization, pigmentation and complexity of sensory structures are compared, with greater focus on the well-studied cave trichoniscid Titanethes albus. A large number of thinner cuticular layers in cave isopods compared to fewer thicker cuticular layers in related epigean species of similar body-sizes is explained as a specific adaptation to the cavernicolous life style. The epicuticle structure and composition are compared in relation to their potential waterproofing capacity in different environments. Cuticle mineralization is described from the functional point of view as well as from the aspect of different calcium storage sites and calcium dynamics during the molt cycle. We also discuss the nature and reduction of pigmentation in the cave environment and outline perspectives for future research.

Insights from the Shell Proteome: Biomineralization to Adaptation

Bivalves have evolved a range of complex shell forming mechanisms that are reflected by their incredible diversity in shell mineralogy and microstructures. A suite of proteins exported to the shell matrix space plays a significant role in controlling these features, in addition to underpinning some of the physical properties of the shell itself. Although, there is a general consensus that a minimum basic protein tool kit is required for shell construction, to date, this remains undefined. In this study, the shell matrix proteins (SMPs) of four highly divergent bivalves (The Pacific oyster, Crassostrea gigas; the blue mussel, Mytilus edulis; the clam, Mya truncata, and the king scallop, Pecten maximus) were analyzed in an identical fashion using proteomics pipeline. This enabled us to identify the critical elements of a "basic tool kit" for calcification processes, which were conserved across the taxa irrespective of the shell morphology and arrangement of the crystal surfaces. In addition, protein domains controlling the crystal layers specific to aragonite and calcite were also identified. Intriguingly, a significant number of the identified SMPs contained domains related to immune functions. These were often are unique to each species implying their involvement not only in immunity, but also environmental adaptation. This suggests that the SMPs are selectively exported in a complex mix to endow the shell with both mechanical protection and biochemical defense.

Damage, repair and regeneration in insect cuticle: The story so far, and possibilities for the future

The exoskeleton of an insect can contain countless specializations across an individual, across developmental stages, and across the class Insecta. Hence, the exoskeleton's building material cuticle must perform a vast variety of functions. Cuticle displays a wide range of material properties which are determined by several known factors: the amount and orientation of the chitin fibres, the constituents and degree of cross-linking and hydration of the protein matrix, the relative amounts of exo- and endocuticle, and the shape of the structures themselves. In comparison to other natural materials such as wood and mammal bone, relatively few investigations into the mechanical properties of insect cuticle have been carried out. Of these, very few have focussed on the need for repair and its effectiveness at restoring mechanical stability to the cuticle. Insect body parts are often subject to prolonged repeated cyclic loads when running and flying, as well as more extreme "emergency" behaviours necessary for survival such as jumping, wedging (squeezing through small holes) and righting (when overturned). What effects have these actions on the cuticle itself? How close to the limits of failure does an insect push its body parts? Can an insect recover from minor or major damage to its exoskeleton "bones"? No current research has answered these questions conclusively.

Cuticle morphogenesis in crustacean embryonic and postembryonic stages

The crustacean cuticle is a chitin-based extracellular matrix, produced in general by epidermal cells and ectodermally derived epithelial cells of the digestive tract. Cuticle morphogenesis is an integrative part of embryonic and postembryonic development and it was studied in several groups of crustaceans, but mainly with a focus on one selected aspect of morphogenesis. Early studies were focused mainly on in vivo or histological observations of embryonic or larval molt cycles and more recently, some ultrastructural studies of the cuticle differentiation during development were performed. The aim of this paper is to review data on exoskeletal and gut cuticle formation during embryonic and postembryonic development in crustaceans, obtained in different developmental stages of different species and to bring together and discuss different aspects of cuticle morphogenesis, namely data on the morphology, ultrastructure, composition, connections to muscles and molt cycles in relation to cuticle differentiation. Based on the comparative evaluation of microscopic analyses of cuticle in crustacean embryonic and postembryonic stages, common principles of cuticle morphogenesis during development are discussed. Additional studies are suggested to further clarify this topic and to connect the new knowledge to related fields.

Ion transport peptide (ITP) regulates wing expansion and cuticle melanism in the brown planthopper, Nilaparvata lugens

Ion transport peptide (ITP) and its alternatively spliced homologous ITP-like (ITPL) products play important roles in various insect developmental processes. We found for the first time that alternative 5' untranslated regions (5' UTRs) of ITPL (NilluITPLs-1, -2, -3 and -4) control spatiotemporal expression in the brown planthopper, Nilaparvata lugens, as demonstrated by reverse-transcription quantitative PCR. By using an alternative 5' UTR, NilluITPL-1 was expressed exclusively in the male reproductive system, resulting in the production of the NilluITPL seminal fluid protein. Interestingly, NilluITPLs-3 and -4 were expressed exclusively in the integument, indicating a specialized function for NilluITPL during ecdysis and eclosion. We investigated the functions of NilluITP and NilluITPL using RNA interference (RNAi). We did not observe apparent phenotypes when expression of NilluITPLs was suppressed. However, when NilluITP expression was suppressed, the insect exhibited melanism and failed wing expansion, indicating that NilluITP is a neuropeptide associated with wing expansion in addition to bursicon. Additionally, in contrast to bursicon, the insects showed increased melanism when NilluITP was eliminated by RNAi. Unlike previous studies of ITP/ITPL in other species, NilluITP was very important in the control of N. lugens postecdysial behaviours but was not critical during ecdysis. Thus, the functions of ITP and ITPL are more complex in insects than previously thought.

Functional adaptation of crustacean exoskeletal elements through structural and compositional diversity: a combined experimental and theoretical study

The crustacean cuticle is a composite material that covers the whole animal and forms the continuous exoskeleton. Nano-fibers composed of chitin and protein molecules form most of the organic matrix of the cuticle that, at the macroscale, is organized in up to eight hierarchical levels. At least two of them, the exo- and endocuticle, contain a mineral phase of mainly Mg-calcite, amorphous calcium carbonate and phosphate. The high number of hierarchical levels and the compositional diversity provide a high degree of freedom for varying the physical, in particular mechanical, properties of the material. This makes the cuticle a versatile material ideally suited to form a variety of skeletal elements that are adapted to different functions and the eco-physiological strains of individual species. This review presents our recent analytical, experimental and theoretical studies on the cuticle, summarising at which hierarchical levels structure and composition are modified to achieve the required physical properties. We describe our multi-scale hierarchical modeling approach based on the results from these studies, aiming at systematically predicting the structure-composition-property relations of cuticle composites from the molecular level to the macro-scale. This modeling approach provides a tool to facilitate the development of optimized biomimetic materials within a knowledge-based design approach.

[EXOSKELETON ABNORMALITIES IN TAIGA TICK FEMALES FROM POPULATIONS OF THE ASIATIC PART OF RUSSIA]

Studies of the phenotypic structure of Ixodes persulcatus (Schulze, 1930) populations in relation to their exoskeleton abnormalities are important in both theoretical and practical respects. The data on the species' population structure in Asiatic part of Russia are fragmentary. The goal of the study was to describe taiga tick population structure based on the pattern of females' exoskeleton abnormalities revealed in Asiatic part of Russia. A total of 3872 I. persulcatus females from 16 geographically remote sites of Far Eastern, Siberian, and Ural Federal Districts (FEFD, SFD, and UFD accordingly) were studied. It was demonstrated that all the populations possessed specimens with exoskeleton abnormalities. The «shagreen skin» abnormality was dominant in all these areas. At the same time, the percentage of abnormalities among the specimens collected to the north of 55°N is considerably higher (63.4 ± 3.39 %) than that of samples from the SFD southward territories (33.1 ± 3.43 %). The frequency of abnormalities in its turn is lower (24.4 ± 1.93 %) in the females from the territories with moderate monsoon and moderate continental climate (FEFD) than that in specimens from SFD and UFD areas with sharp continental climate. Thus, such polymorphism of the females' exoskeleton structure may reflect the natural phenogeographical variability of the character rather than the result of the anthropogenic impact. 403

Impact of high pCO2 on shell structure of the bivalve Cerastoderma edule

Raised atmospheric emissions of carbon dioxide (CO2) result in an increased ocean pCO2 level and decreased carbonate saturation state. Ocean acidification potentially represents a major threat to calcifying organisms, specifically mollusks. The present study focuses on the impact of elevated pCO2 on shell microstructural and mechanical properties of the bivalve Cerastoderma edule. The mollusks were collected from the Baltic Sea and kept in flow-through systems at six different pCO2 levels from 900 μatm (control) to 24,400 μatm. Extreme pCO2 levels were used to determine the effects of potential leaks from the carbon capture and sequestration sites where CO2 is stored in sub-seabed geological formations. Two approaches were combined to determine the effects of the acidified conditions: (1) Shell microstructures and dissolution damage were analyzed using scanning electron microscopy (SEM) and (2) shell hardness was tested using nanoindentation. Microstructures of specimens reared at different pCO2 levels do not show significant changes in their size and shape. Likewise, the increase of pCO2 does not affect shell hardness. However, dissolution of ontogenetically younger portions of the shell becomes more severe with the increase of pCO2. Irrespective of pCO2, strong negative correlations exist between microstructure size and shell mechanics. An additional sample from the North Sea revealed the same microstructural-mechanical interdependency as the shells from the Baltic Sea. Our findings suggest that the skeletal structure of C. edule is not intensely influenced by pCO2 variations. Furthermore, our study indicates that naturally occurring shell mechanical property depends on the shell architecture at μm-scale.

Push or Pull? The light-weight architecture of the Daphnia pulex carapace is adapted to withstand tension, not compression

Daphnia (Crustacea, Cladocera) are well known for their ability to form morphological adaptations to defend against predators. In addition to spines and helmets, the carapace itself is a protective structure encapsulating the main body, but not the head. It is formed by a double layer of the integument interconnected by small pillars and hemolymphatic space in between. A second function of the carapace is respiration, which is performed through its proximal integument. The interconnecting pillars were previously described as providing higher mechanical stability against compressive forces. Following this hypothesis, we analyzed the carapace structure of D. pulex using histochemistry in combination with light and electron microscopy. We found the distal integument of the carapace to be significantly thicker than the proximal. The pillars appear fibrous with slim waists and broad, sometimes branched bases where they meet the integument layers. The fibrous structure and the slim-waisted shape of the pillars indicate a high capacity for withstanding tensile rather than compressive forces. In conclusion they are more ligaments than pillars. Therefore, we measured the hemolymphatic gauge pressure in D. longicephala and indeed found the hemocoel to have a pressure above ambient. Our results offer a new mechanistic explanation of the high rigidity of the daphniid carapace, which is probably the result of a light-weight construction consisting of two integuments bound together by ligaments and inflated by a hydrostatic hyper-pressure in the hemocoel. J. Morphol. 277:1320-1328, 2016. © 2016 Wiley Periodicals, Inc.

Biomineralization changes with food supply confer juvenile scallops (Argopecten purpuratus) resistance to ocean acidification

Future ocean acidification (OA) will affect physiological traits of marine species, with calcifying species being particularly vulnerable. As OA entails high energy demands, particularly during the rapid juvenile growth phase, food supply may play a key role in the response of marine organisms to OA. We experimentally evaluated the role of food supply in modulating physiological responses and biomineralization processes in juveniles of the Chilean scallop, Argopecten purpuratus, that were exposed to control (pH ~ 8.0) and low pH (pH ~ 7.6) conditions using three food supply treatments (high, intermediate, and low). We found that pH and food levels had additive effects on the physiological response of the juvenile scallops. Metabolic rates, shell growth, net calcification, and ingestion rates increased significantly at low pH conditions, independent of food. These physiological responses increased significantly in organisms exposed to intermediate and high levels of food supply. Hence, food supply seems to play a major role modulating organismal response by providing the energetic means to bolster the physiological response of OA stress. On the contrary, the relative expression of chitin synthase, a functional molecule for biomineralization, increased significantly in scallops exposed to low food supply and low pH, which resulted in a thicker periostracum enriched with chitin polysaccharides. Under reduced food and low pH conditions, the adaptive organismal response was to trade-off growth for the expression of biomineralization molecules and altering of the organic composition of shell periostracum, suggesting that the future performance of these calcifiers will depend on the trajectories of both OA and food supply. Thus, incorporating a suite of traits and multiple stressors in future studies of the adaptive organismal response may provide key insights on OA impacts on marine calcifiers.

Buckling prevention strategies in nature as inspiration for improving percutaneous instruments: a review

A typical mechanical failure mode observed in slender percutaneous instruments, such as needles and guidewires, is buckling. Buckling is observed when the axial compressive force that is required to penetrate certain tissue types exceeds the critical load of the instrument and manifests itself by sudden lateral deflection of the instrument. In nature, several organisms are able to penetrate substrates without buckling while using apparatuses with diameters smaller than those of off-the-shelf available percutaneous needles and guidewires. In this study we reviewed the apparatuses and buckling prevention strategies employed by biological organisms to penetrate substrates such as wood and skin. A subdivision is made between buckling prevention strategies that focus on increasing the critical load of the penetration tool and strategies that focus on decreasing the penetration load of the substrate. In total, 28 buckling prevention strategies were identified and categorized. Most organisms appear to be using a combination of buckling prevention strategies simultaneously. Integration and combination of these biological buckling prevention strategies in percutaneous instruments may contribute to increasing the success rate of percutaneous interventions.

Stress tolerance during diapause and quiescence of the brine shrimp, Artemia

Oviparously developing embryos of the brine shrimp, Artemia, arrest at gastrulation and are released from females as cysts before entering diapause, a state of dormancy and stress tolerance. Diapause is terminated by an external signal, and growth resumes if conditions are permissible. However, if circumstances are unfavorable, cysts enter quiescence, a dormant stage that continues as long as adverse conditions persist. Artemia embryos in diapause and quiescence are remarkably resistant to environmental and physiological stressors, withstanding desiccation, cold, heat, oxidation, ultraviolet radiation, and years of anoxia at ambient temperature when fully hydrated. Cysts have adapted to stress in several ways; they are surrounded by a rigid cell wall impermeable to most chemical compounds and which functions as a shield against ultraviolet radiation. Artemia cysts contain large amounts of trehalose, a non-reducing sugar thought to preserve membranes and proteins during desiccation by replacing water molecules and/or contributing to vitrification. Late embryogenesis abundant proteins similar to those in seeds and other anhydrobiotic organisms are found in cysts, and they safeguard cell organelles and proteins during desiccation. Artemia cysts contain abundant amounts of p26, a small heat shock protein, and artemin, a ferritin homologue, both ATP-independent molecular chaperones important in stress tolerance. The evidence provided in this review supports the conclusion that it is the interplay of these protective elements that make Artemia one of the most stress tolerant of all metazoan organisms.

Buckling failures in insect exoskeletons

Thin walled tubes are often used for load-bearing structures, in nature and in engineering, because they offer good resistance to bending and torsion at relatively low weight. However, when loaded in bending they are prone to failure by buckling. It is difficult to predict the loading conditions which cause buckling, especially for tubes whose cross sections are not simple shapes. Insights into buckling prevention might be gained by studying this phenomenon in the exoskeletons of insects and other arthropods. We investigated the leg segments (tibiae) of five different insects: the locust (Schistocerca gergaria), American cockroach (Periplaneta americana), death's head cockroach (Blaberus discoidalis), stick insect (Parapachymorpha zomproi) and bumblebee (Bombus terrestris audax). These were tested to failure in cantilever bending and modelled using finite element analysis (FEA). The tibiae of the locust and the cockroaches were found to be approximately circular in shape. Their buckling loads were well predicted by linear elastic FEA, and also by one of the analytical solutions available in the literature for elastic buckling. The legs of the stick insect are also circular in cross section but have several prominent longitudinal ridges. We hypothesised that these ridges might protect the legs against buckling but we found that this was not the case: the loads necessary for elastic buckling were not reached in practice because yield occurred in the material, causing plastic buckling. The legs of bees have a non-circular cross section due to a pollen-carrying feature (the corbicula). We found that this did not significantly affect their resistance to buckling. Our results imply that buckling is the dominant failure mode in the tibia of insects; it likely to be a significant consideration for other arthropods and any organisms with stiff exoskeletons. The interactions displayed here between material properties and cross sectional geometry may provide insights for the biomimetic design of engineering structures using thin walled tubes.

Mantle Branch-Specific RNA Sequences of Moon Scallop Amusium pleuronectes to Identify Shell Color-Associated Genes

Amusium pleuronectes (Linnaeus) that secretes red- and white-colored valves in two branches of mantle tissues is an excellent model for shell color research. High-throughput transcriptome sequencing and profiling were applied in this project to reveal the detailed molecular mechanism of this phenotype differentiation. In this study, 50,796,780 and 54,361,178 clean reads were generated from the left branch (secreting red valve, RS) and right branch (secreting white valve, WS) using the Illumina Hiseq 2000 platform. De novo assembly generated 149,375 and 176,652 unigenes with an average length of 764 bp and 698 bp in RS and WS, respectively. Kyoto encyclopedia of genes and genomes (KEGG) metabolic pathway analysis indicated that the differentially expressed genes were involved in 228 signaling pathways, and 43 genes were significantly enriched (P<0.01). Nineteen of 20 differentially expressed vitellogenin genes showed significantly high expression in RS, which suggested that they probably played a crucial role in organic pigment assembly and transportation of the shell. Moreover, 687 crystal formation-related (or biomineralization-related) genes were detected in A. pleuronectes, among which 144 genes exhibited significant difference between the two branches. Those genes could be classified into shell matrix framework participants, crystal nucleation and growth-related elements, upstream regulation factors, Ca level regulators, and other classifications. We also identified putative SNP and SSR markers from these samples which provided the markers for genetic diversity analysis, genetic linkage, QTL analysis. These results provide insight into the complexity of shell color differentiation in A. pleuronectes so as valuable resources for further research.

Modelling cephalopod-inspired pulsed-jet locomotion for underwater soft robots

Cephalopods (i.e., octopuses and squids) are being looked upon as a source of inspiration for the development of unmanned underwater vehicles. One kind of cephalopod-inspired soft-bodied vehicle developed by the authors entails a hollow, elastic shell capable of performing a routine of recursive ingestion and expulsion of discrete slugs of fluids which enable the vehicle to propel itself in water. The vehicle performances were found to depend largely on the elastic response of the shell to the actuation cycle, thus motivating the development of a coupled propulsion-elastodynamics model of such vehicles. The model is developed and validated against a set of experimental results performed with the existing cephalopod-inspired prototypes. A metric of the efficiency of the propulsion routine which accounts for the elastic energy contribution during the ingestion/expulsion phases of the actuation is formulated. Demonstration on the use of this model to estimate the efficiency of the propulsion routine for various pulsation frequencies and for different morphologies of the vehicles are provided. This metric of efficiency, employed in association with the present elastodynamics model, provides a useful tool for performing a priori energetic analysis which encompass both the design specifications and the actuation pattern of this new kind of underwater vehicle.

Microstructure and micromechanics of the heart urchin test from X-ray tomography

The microstructure of many echinoid species has long fascinated scientists because of its high porosity and outstanding mechanical properties. We have used X-ray microtomography to examine the test of Echinocardium cordatum (heart urchin), a burrowing cousin of the more commonly known sea urchins. Three dimensional imaging demonstrates that the bulk of the test is composed of only two distinct, highly porous, fenestrated regions (stereom), in which the thickness of the struts is constant. Different degrees of porosity are achieved by varying the spacing of the struts. Drawing an analogy to vertebrate trabecular bone, where for example, human bone has a connectivity density of ≈1/mm(3), we measure up to 150,000 strut connections per mm(3). Simulations of mechanical loading using finite element calculations indicate that the test performs at very close to the optimum expected for foams, highlighting the functional link between structure and mechanical properties.

Intrinsic hierarchical structural imperfections in a natural ceramic of bivalve shell with distinctly graded properties

Despite the extensive investigation on the structure of natural biological materials, insufficient attention has been paid to the structural imperfections by which the mechanical properties of synthetic materials are dominated. In this study, the structure of bivalve Saxidomus purpuratus shell has been systematically characterized quantitatively on multiple length scales from millimeter to sub-nanometer. It is revealed that hierarchical imperfections are intrinsically involved in the crossed-lamellar structure of the shell despite its periodically packed platelets. In particular, various favorable characters which are always pursued in synthetic materials, e.g. nanotwins and low-angle misorientations, have been incorporated herein. The possible contributions of these imperfections to mechanical properties are further discussed. It is suggested that the imperfections may serve as structural adaptations, rather than detrimental defects in the real sense, to help improve the mechanical properties of natural biological materials. This study may aid in understanding the optimizing strategies of structure and properties designed by nature, and accordingly, provide inspiration for the design of synthetic materials.

Built to fight: variable loading conditions and stress distribution in stag beetle jaws

Designing very robust structures in an efficient way is a reoccurring challenge in engineering. For male stag beetle weaponry, the solution to this problem was evolved by natural and sexual selection. Stag beetle armature is adapted to perform under extreme circumstances: male stag beetles fight pugnacious battles over females, by using their extremely large jaws as ferocious weapons. During violent encounters, these jaws have to withstand forces with a wide range of unpredictable directions at several application points. We constructed 1020 finite element models with different input forces to investigate how the male jaws are structurally adapted to avoid failure. The cross-sectional shape of the jaw is adapted to provide robustness against the reaction forces of biting. Nevertheless, the jaw's shape cannot prevent the fact that bite forces induce relatively high material stresses compared to other force directions. Also, males do not confine themselves in combats to bite with the most robust jaw regions. Both observations emphasize the usefulness of bite force modulation to avoid jaw failure. This is likely effectuated by a sensory network in the jaw exoskeleton, as sensor densities are nicely correlated to the maximal material stress caused by 510 different loading directions. Probably, stag beetles use this sensory information to adjust their fighting strategy as well. Finally, male jaws also need to resist the forceful bites inflicted by opponents. Even though this loading applies at other locations along the jaw, and bends the jaw in the opposite direction, our models show that the jaws are equally robust against these external forces as they are against the forces caused by their own biting.