Algae and indigenous bacteria consortium in treatment of shrimp wastewater: A study for resource recovery in sustainable aquaculture system

Shrimp production facilities produce large quantities of wastewater, which consists of organic and inorganic pollutants. High concentrations of these pollutants in shrimp wastewater cause serious environmental problems and, therefore, a method of treating this wastewater is an important research topic. This study investigated the impact of algae and indigenous bacteria on treating shrimp wastewater. A total of four different microalgae cultures, including Chlorococcum minutus, Porphyridum cruentum, Chlorella vulgaris and Chlorella reinhardtii along with two cyanobacterial cultures, Microcystis aeruginosa and Fishcherella muscicola were used with indigenous bacterial cultures to treat shrimp wastewater. The highest soluble chemical oxygen demand (sCOD) removal rate (95%) was observed in the samples that were incubated using F. muscicola. Total dissolved nitrogen was degraded >90% in the C. vulgaris, M. aeruginosa, and C. reinhardtii seeded samples. Dissolved organic nitrogen removal was significantly higher for C. vulgaris (93%) as compared to other treatments. Similarly, phosphate degradation was very successful for all the algae-bacteria consortium (>99%). Moreover, the degradation kinetics were calculated, and the lowest half-life (t1/2) for sCOD (5 days) was recorded for the samples seeded with M. aeruginosa. Similarly, treatment with F. muscicola and C. reinhardtii showed the lowest t1/2 of NH3-N (2.9 days) and phosphate (2.7 days) values. Overall, the results from this study suggest that the symbiotic relationship between indigenous bacteria and algae significantly enhanced the process of shrimp wastewater treatment within 21 days of incubation. The outcome of this study supports resource recovery in the aquaculture sector and could be beneficial to treat a large-scale shrimp facility's wastewater worldwide.

Life cycle assessment on environmental feasibility of microalgae-based wastewater treatment for shrimp recirculating aquaculture systems

This life cycle assessment (LCA) study analyzed the environmental consequences of integrating microalgae-based wastewater treatment into a shrimp farm with recirculating aquaculture systems (RAS). Microalgae treatment produced <10 % of the system's freshwater eutrophication potential (FEP), marine eutrophication potential (MEP) and global warming potential, which was dominantly contributed by electricity use. Microalgae treatment performed comparably to activated sludge treatment for FEP reduction, and was more effective in remediating marine eutrophication. Replacing coal in electricity mix, particularly with renewables, reduced the system's impacts by up to 90-99 %. Performing the LCA based on system expansion generally obtained higher impacts compared to allocation. Utilizing algal biomass for biogas production reduced the MEP; however, production of feed ingredient and biodiesel were not environmentally beneficial. This study proved the use of microalgae for aquaculture wastewater treatment to be environmentally feasible, the results can guide more sustainable RAS operations and design of full-scale microalgae treatment.

Biodegradability and bioavailability of dissolved substances in aquaculture effluent: Performance of indigenous bacteria, cyanobacteria, and green microalgae

Aquaculture is a controlled aquatic farming sector and one of the most important human food sources. Fish farming is one of the predominant, fast-growing sectors that supply seafood products worldwide. Along with its benefits, aquaculture practices can discharge large quantities of nutrients into the environment through non-treated or poorly treated wastewater. This study aims to understand the nutrient composition of fish wastewater and the use of indigenous bacteria, cyanobacteria, and microalgae as an alternative biological treatment method. Wastewater samples from a local fish farming facility were collected and treated using six different species of cyanobacteria and microalgae include Chroococcus minutus, Porphyridium cruentum, Chlorella vulgaris, Microcystis aeruginosa, Chlamydomonas reinhardtii, and Fischerella muscicola. All the samples were incubated for 21 days, and the following parameters were measured weekly: Chemical oxygen demand (COD), phosphate, total dissolved nitrogen, and dissolved inorganic nitrogen. In addition, dissolved organic nitrogen (DON), bioavailable DON (ABDON), and biodegradable DON (BDON) were calculated from the mass-balance equations. Colorimetric and digestive methods were used for the parameter measurements. The results showed that C. reinhardtii reduced the soluble COD concentration by 74.6 %, DON by 94.3 %, and phosphorous by more than 99 %. Moreover, M. aeruginosa, and C. minutus significantly reduced inorganic nitrogen species (>99 %). This alternative fish wastewater treatment method was explored to gain insight into fish wastewater nutrient composition and to create a sustainable alternative to conventional fish wastewater treatment methods.

Treatment and optimization of high-strength egg-wash wastewater effluent using electrocoagulation and electrooxidation methods

Egg-washing wastewater contains a high concentration of nutrition and organic matter since eggs are broken during the washing and cleaning processes. Moreover, the wastewater contains small amounts of detergents or sanitizing agents. These contaminants may pose environmental challenges when they are not properly managed or treated. The study scrutinizes the efficiency of electrocoagulation (EO) and electrooxidation (EO) approaches for egg-wash wastewater treatment. The response surface methodology was employed to optimize the operational parameters. The removal efficiencies of soluble chemical oxygen demand (sCOD 90%), ammonia (NH3-N 91%), nitrate (NO3--N 97%), nitrite (NO2--N 89.3%), total dissolved nitrogen (TDN 91%), and phosphate (90%) were measured under various treatment conditions. The optimum treatment conditions achieved in the combined EC + EO process were pH 6.0, current density 20 mA cm-2, and electrolysis time of 60 min, respectively. Degradation kinetics of the egg-wash pollutants showed a significant reduction in half-life (t1/2) with EO (after EC-Aluminum) at 15 min, 12 min, 17 min, and 15 min for sCOD, NO2--N. NO3--N, and TDN, respectively. Whereas the half-life of NH3-N (18 min) and phosphate (17 min) reduced significantly with the EO (after EC-iron). Al and Fe electrodes coupled with boron-doped diamond were found efficient for pollutant removal. Environmental implication. Egg-wash wastewater has a high protein content and contains nutrients that are essential for living organisms. While these compounds can be valuable for agricultural use by increasing soil phosphate concentration, they can also become an issue if the excess nutrients are not properly managed. The soil has a threshold limit for holding phosphate, and any excess amount may be transported through surface runoff or contaminate groundwater through leachate, potentially affecting aquatic ecosystems and water quality. This study explores the efficiency of electrocoagulation and electrooxidation methods in treating egg-wash wastewater. These methods aim to remove pollutants and reduce their environmental impact.

Biofilm formation in xenobiotic-degrading microorganisms

The increased presence of xenobiotics affects living organisms and the environment at large on a global scale. Microbial degradation is effective for the removal of xenobiotics from the ecosystem. In natural habitats, biofilms are formed by single or multiple populations attached to biotic/abiotic surfaces and interfaces. The attachment of microbial cells to these surfaces is possible via the matrix of extracellular polymeric substances (EPSs). However, the molecular machinery underlying the development of biofilms differs depending on the microbial species. Biofilms act as biocatalysts and degrade xenobiotic compounds, thereby removing them from the environment. Quorum sensing (QS) helps with biofilm formation and is linked to the development of biofilms in natural contaminated sites. To date, scant information is available about the biofilm-mediated degradation of toxic chemicals from the environment. Therefore, we review novel insights into the impact of microbial biofilms in xenobiotic contamination remediation, the regulation of biofilms in contaminated sites, and the implications for large-scale xenobiotic compound treatment.

Bacteriophage-based biosensors for detection of pathogenic microbes in wastewater

Wastewater is discarded from several sources, including industry, livestock, fertilizer application, and municipal waste. If the disposed of wastewater has not been treated and processed before discharge to the environment, pathogenic microorganisms and toxic chemicals are accumulated in the disposal area and transported into the surface waters. The presence of harmful microbes is responsible for thousands of human deaths related to water-born contamination every year. To be able to take the necessary step and quick action against the possible presence of harmful microorganisms and substances, there is a need to improve the effective speed of identification and treatment of these problems. Biosensors are such devices that can give quantitative information within a short period of time. There have been several biosensors developed to measure certain parameters and microorganisms. The discovered biosensors can be utilized for the detection of axenic and mixed microbial strains from the wastewaters. Biosensors can further be developed for specific conditions and environments with an in-depth understanding of microbial organization and interaction within that community. In this regard, bacteriophage-based biosensors have become a possibility to identify specific live bacteria in an infected environment. This paper has investigated the current scenario of microbial community analysis and biosensor development in identifying the presence of pathogenic microorganisms.

Functional and Tableting Properties of Alkali-Isolated and Phosphorylated Barnyard Millet (Echinochloa esculenta) Starch

The functional and tableting properties of barnyard millet starch (Echinochloa esculenta) were investigated in its native (alkali-treated) and chemically modified (phosphorylated) states. The grains were pulverized, soaked, and ground before filtration to separate starch and protein. Multiple NaOH treatments were performed. The starch was washed, neutralized, and dried. Sodium tripolyphosphate (STPP) and sodium sulfate were used to modify the starch, followed by maceration, washing, and drying to remove unreacted chemicals. The amylose content of alkali-treated barnyard millet starch increased by 19.96 ± 3.56% w/w. The amount of protein, the kind of starch used, and the size of the starch granules, all affected the ability of the starch granules to swell up. It was observed that alkali-extracted barnyard millet starch (AZS) has a swelling power of 194.3 ± 0.0064% w/w. The swelling capacity of treated starch was lesser as compared to the native alkali barnyard millet starch. Decrement in swelling power of phosphorylated starch was observed due to tightening of bonds in the molecular structure. The moisture content of the excipients may affect the overall stability of the formulation. The moisture content of the AZS was found to be 15.336 ± 1.012% w/w. Compared to AZS, cross-linked barnyard millet starch had a moisture content that was up to 20% lower than AZS. The Hausner ratio for phosphorylated starch was found to be 1.25, which indicates marked flow property. Similar morphologies could be seen in the alkali-isolated barnyard millet starch and the cross-linked/phosphorylated barnyard millet that was cross-linked using a mixture of sodium sulfate and sodium tripolyphosphate. The modest degree of substitution would have no effect on the surface morphology as shown by the scanning electron microscopic study. The crushing and compacting abilities of modified barnyard millet starch were also improved, but its friability and rate of disintegration were decreased. The whole study revealed that after cross-linking, barnyard millet had good tableting properties and it can be used as an excipient in drug delivery.

Plasma Modification Techniques for Natural Polymer-Based Drug Delivery Systems

Natural polymers have attracted significant attention in drug delivery applications due to their biocompatibility, biodegradability, and versatility. However, their surface properties often limit their use as drug delivery vehicles, as they may exhibit poor wettability, weak adhesion, and inadequate drug loading and release. Plasma treatment is a promising surface modification technique that can overcome these limitations by introducing various functional groups onto the natural polymer surface, thus enhancing its physicochemical and biological properties. This review provides a critical overview of recent advances in the plasma modification of natural polymer-based drug delivery systems, with a focus on controllable plasma treatment techniques. The review covers the fundamental principles of plasma generation, process control, and characterization of plasma-treated natural polymer surfaces. It discusses the various applications of plasma-modified natural polymer-based drug delivery systems, including improved biocompatibility, controlled drug release, and targeted drug delivery. The challenges and emerging trends in the field of plasma modification of natural polymer-based drug delivery systems are also highlighted. The review concludes with a discussion of the potential of controllable plasma treatment as a versatile and effective tool for the surface functionalization of natural polymer-based drug delivery systems.

Cyanophage-cyanobacterial interactions for sustainable aquatic environment

Cyanobacteria are a type of bloom-forming phytoplankton that cause environmental problems in aquatic ecosystems worldwide. Cyanobacterial harmful algal blooms (cyanoHAB) often produce cyanotoxins that affect public health by contaminating surface waters and drinking water reservoirs. Conventional drinking water treatment plants are ineffective in treating cyanotoxins, even though some treatment methods are available. Therefore, innovative and advanced treatment methods are required to control cyanoHABs and their cyanotoxins. The goal of this review paper is to provide insight into the use of cyanophages as an effective form of biological control method for the removal of cyanoHABs in aquatic systems. Moreover, the review contains information on cyanobacterial blooms, cyanophage-cyanobacteria interactions, including infection mechanisms, as well as examples of different types of cyanobacteria and cyanophages. Moreover, the real-life application of cyanophages in marine and freshwater environments and the mode of action of cyanophages were compiled.

High-efficiency degradation of methomyl by the novel bacterial consortium MF0904: Performance, structural analysis, metabolic pathways, and environmental bioremediation

Methomyl is a widely used carbamate pesticide, which has adverse biological effects and poses a serious threat to ecological environments and human health. Several bacterial isolates have been investigated for removing methomyl from environment. However, low degradation efficiency and poor environmental adaptability of pure cultures severely limits their potential for bioremediation of methomyl-contaminated environment. Here, a novel microbial consortium, MF0904, can degrade 100% of 25 mg/L methomyl within 96 h, an efficiency higher than that of any other consortia or pure microbes reported so far. The sequencing analysis revealed that Pandoraea, Stenotrophomonas and Paracoccus were the predominant members of MF0904 in the degradation process, suggesting that these genera might play pivotal roles in methomyl biodegradation. Moreover, five new metabolites including ethanamine, 1,2-dimethyldisulfane, 2-hydroxyacetonitrile, N-hydroxyacetamide, and acetaldehyde were identified using gas chromatography-mass spectrometry, indicating that methomyl could be degraded firstly by hydrolysis of its ester bond, followed by cleavage of the C-S ring and subsequent metabolism. Furthermore, MF0904 can successfully colonize and substantially enhance methomyl degradation in different soils, with complete degradation of 25 mg/L methomyl within 96 and 72 h in sterile and nonsterile soil, respectively. Together, the discovery of microbial consortium MF0904 fills a gap in the synergistic metabolism of methomyl at the community level and provides a potential candidate for bioremediation applications.

Esterase and ALDH dehydrogenase-based pesticide degradation by Bacillus brevis 1B from a contaminated environment

The isolated bacterial strain (Bacillus brevis strain 1 B) showed a maximum tolerated level of 450 mg L^-1 of the selected pesticides namely: imidacloprid, fipronil, cypermethrin, and sulfosulfuron. Within 15 days of the experiment, strain 1 B was able to reduce up to 95% of a pesticide mixture (20 mg L^-1) in a carbon-deficient medium (minimal medium). The optimal conditions obtained using Response Surface Methodology (RSM) were: inoculums; 2.0 × 10⁷ CFU mL^-1, shaking speed; 120 rpm, and pesticide concentration; 80 mg L^-1. After 15 days of soil-based bioremediation using strain 1 B, the degradation pattern for imidacloprid, fipronil, cypermethrin, sulfosulfuron, and control was 99, 98.5, 94, 91.67, and 7%, respectively. Gas chromatography-mass spectrometry (GC-MS) analysis was used to determine the intermediate metabolites of cypermethrin with bacterial 1 B as 2-cyclopenten-1-one, 2-methylpyrrolidine, 2-oxonanone, 2-pentenoic acid, 2-penten-1-ol, hexadecanoic acid or palmitic acid, pentadecanoic acid, 3-cyclopentylpropionic acid, and 2-dimethyl. Furthermore, genes encoding aldehyde dehydrogenase (ALDH) and esterase were expressed under stress conditions and connected to pesticide bioremediation. Hence the efficacy of Bacillus brevis (1 B) could be employed for the bioremediation of pesticide mixtures and other toxic substances (dye, polyaromatic hydrocarbon, etc.) from contaminated sites.

Developments and application of chitosan-based adsorbents for wastewater treatments

Water quality is deteriorating continuously as increasing levels of toxic inorganic and organic contaminants mostly discharging into the aquatic environment. Removal of such pollutants from the water system is an emerging research area. During the past few years use of biodegradable and biocompatible natural additives has attracted considerable attention to alleviate pollutants from wastewater. The chitosan and its composites emerged as a promising adsorbents due to their low price, abundance, amino, and hydroxyl groups, as well as their potential to remove various toxins from wastewater. However, a few challenges associated with its practical use include lack of selectivity, low mechanical strength, and solubility in acidic medium. Therefore, several approaches for modification have been explored to improve the physicochemical properties of chitosan for wastewater treatment. Chitosan nanocomposites found effective for the removal of metals, pharmaceuticals, pesticides, microplastics from the wastewaters. Nanoparticle doped with chitosan in the form of nano-biocomposites has recently gained much attention and proven a successful tool for water purification. Hence, applying chitosan-based adsorbents with numerous modifications is a cutting-edge approach to eliminating toxic pollutants from aquatic systems with the global aim of making potable water available worldwide. This review presents an overview of distinct materials and methods for developing novel chitosan-based nanocomposites for wastewater treatment.

Current insights into the microbial degradation of nicosulfuron: Strains, metabolic pathways, and molecular mechanisms

Nicosulfuron is among the sulfonylurea herbicides that are widely used to control annual and perennial grass weeds in cornfields. However, nicosulfuron residues in the environment are likely to cause long-lasting harmful environmental and biological effects. Nicosulfuron degrades via photo-degradation, chemical hydrolysis, and microbial degradation. The latter is crucial for pesticide degradation and has become an essential strategy to remove nicosulfuron residues from the environment. Most previous studies have focused on the screening, degradation characteristics, and degradation pathways of biodegrader microorganisms. The isolated nicosulfuron-degrading strains include Bacillus, Pseudomonas, Klebsiella, Alcaligenes, Rhodopseudomonas, Ochrobactrum, Micrococcus, Serratia, Penicillium, Aspergillus, among others, all of which have good degradation efficiency. Two main intermediates, 2-amino-4,6-dimethoxypyrimidine (ADMP) and 2-aminosulfonyl-N,N-dimethylnicotinamide (ASDM), are produced during microbial degradation and are derived from the C-N, C-S, and S-N bond breaks on the sulfonylurea bridge, covering almost every bacterial degradation pathway. In addition, enzymes related to the degradation of nicosulfuron have been identified successively, including the manganese ABC transporter (hydrolase), Flavin-containing monooxygenase (oxidase), and E3 (esterase). Further in-depth studies based on molecular biology and genetics are needed to elaborate on their role in the evolution of novel catabolic pathways and the microbial degradation of nicosulfuron. To date, few reviews have focused on the microbial degradation and degradation mechanisms of nicosulfuron. This review summarizes recent advances in nicosulfuron degradation and comprehensively discusses the potential of nicosulfuron-degrading microorganisms for bioremediating contaminated environments, providing a reference for further research development on nicosulfuron biodegradation in the future.

Identification of Eight High Yielding Strains via Morpho-Molecular Characterization of Thirty-Three Wild Strains of Calocybe indica

Calocybe indica, generally referred as milky mushroom, is one of the edible mushroom species suitable for cultivation in the tropical and sub-tropical regions of the world. However, lack of potential high yielding strains has limited its wider adaptability. To overcome this limitation, in this study, the germplasms of C. indica from different geographical regions of India were characterized based on their morphological, molecular and agronomical attributes. Internal transcribed spacers (ITS1 and ITS4)-based PCR amplification, sequencing and nucleotide analysis confirmed the identity of all the studied strains as C. indica. Further, evaluation of these strains for morphological and yield parameters led to the identification of eight high yielding strains in comparison to the control (DMRO-302). Moreover, genetic diversity analysis of these thirty-three strains was performed using ten sequence-related amplified polymorphism (SRAP) markers/combinations. The Unweighted Pair-group Method with Arithmetic Averages (UPGMA)-based phylogenetic analysis categorized the thirty-three strains along with the control into three clusters. Cluster I possesses the maximum number of strains. Among the high yielding strains, high antioxidant activity and phenol content was recorded in DMRO-54, while maximum protein content was observed in DMRO-202 and DMRO-299 as compared with the control strain. The outcome of this study will help the mushroom breeders and growers in commercializing C. indica.

An integration of algae-mediated wastewater treatment and resource recovery through anaerobic digestion

Eutrophication is one of the major emerging challenges in aquatic environment. Industrial facilities, including food, textile, leather, and paper, generate a significant amount of wastewater during their manufacturing process. Discharge of nutrient-rich industrial effluent into aquatic systems causes eutrophication, eventually disturbs the aquatic system. On the other hand, algae provide a sustainable approach to treat wastewater, while the resultant biomass may be used to produce biofuel and other valuable products such as biofertilizers. This review aims to provide new insight into the application of algal bloom biomass for biogas and biofertilizer production. The literature review suggests that algae can treat all types of wastewater (high strength, low strength, and industrial). However, algal growth and remediation potential mainly depend on growth media composition and operation conditions such as light intensity, wavelength, light/dark cycle, temperature, pH, and mixing. Further, the open pond raceways are cost-effective compared to closed photobioreactors, thus commercially applied for biomass generation. Additionally, converting wastewater-grown algal biomass into methane-rich biogas through anaerobic digestion seems appealing. Environmental factors such as substrate, inoculum-to-substrate ratio, pH, temperature, organic loading rate, hydraulic retention time, and carbon/nitrogen ratio significantly impact the anaerobic digestion process and biogas production. Overall, further pilot-scale studies are required to warrant the real-world applicability of the closed-loop phycoremediation coupled biofuel production technology.

Comprehensive understanding of electrochemical treatment systems combined with biological processes for wastewater remediation

The presence of toxic pollutants in wastewater discharge can affect the environment negatively due to presence of the organic and inorganic contaminants. The application of the electrochemical process in wastewater treatment is promising, specifically in treating these harmful pollutants from the aquatic environment. This review focused on recent applications of the electrochemical process for the remediation of such harmful pollutants from aquatic environments. Furthermore, the process conditions that affect the electrochemical process performance are evaluated, and the appropriate treatment processes are suggested according to the presence of organic and inorganic contaminants. Electrocoagulation, electrooxidation, and electro-Fenton applications in wastewater have shown effective performance with high removal rates. The disadvantages of these processes are the formation of toxic intermediate metabolites, high energy consumption, and sludge generation. To overcome such disadvantages combined ecotechnologies can be applied in large-scale wastewater pollutants removal. The combination of electrochemical and biological treatment has gained importance, increased removal performance remarkably, and decreased operational costs. The critical discussion with depth information in this review could be beneficial for wastewater treatment plant operators throughout the world.

Spinal infections in the north-east of Scotland: a retrospective analysis

INTRODUCTION

Spinal infection (SI) is uncommon and patients present with varied clinical features. In this review, the presentation, investigation, treatment and outcome of patients with SI in the north-east of Scotland were assessed.

METHODS

Electronic medical records of adult patients with SI hospitalised at a health board in the north-east of Scotland between 2014 and 2018 were analysed retrospectively. Collected variables included demographics, presenting clinical features, risk factors, comorbidities, admission blood results, microbiological investigations, imaging, treatment and outcomes.

RESULTS

Seventy-two patients were included. Mean age (±sd) was 63.3 years (±14.5). The lumbar spine was the most commonly involved region (51.4%). Back pain (84.7%), altered mobility (33.3%) and fever (29.2%) were the most frequent presenting features. Thoracic spine involvement (p = 0.041), urinary symptoms (p = 0.033), cauda equina syndrome (CES) (p = 0.027) and limb weakness (p = 0.026) were associated with poorer outcome. A better outcome was associated with back pain at presentation (p = 0.03) and underlying malignancy (p = 0.045). Diabetes (15.3%), recent falls (15.3%) and immunosuppression (12.5%) were common. A likely causative organism was found in 54 patients (75.0%) and Staphylococcus aureus was isolated in 41.7% of patients. Penicillins were used in 56.3% of patients and 20.8% underwent surgery. Outcomes were full recovery (38.2%), residual symptoms or neurological deficits (50.0%), paraplegia (4.4%) and death (7.4%).

CONCLUSIONS

Poorer outcomes occurred in patients with thoracic disease, limb weakness, urinary symptoms or CES, whereas better outcomes were associated with the presence of back pain on presentation and malignancy. This analysis highlights the diagnostic and therapeutic challenges of SI, alerting clinicians to key factors associated with prognosis.

Cellular Response and Molecular Mechanism of Glyphosate Degradation by Chryseobacterium sp. Y16C

Glyphosate is one of the most widely used herbicides worldwide. Unfortunately, the continuous use of glyphosate has resulted in serious environmental contamination and raised public concern about its impact on human health. In our previous study, Chryseobacterium sp. Y16C was isolated and characterized as an efficient degrader that can completely degrade glyphosate. However, the biochemical and molecular mechanisms underlying its glyphosate biodegradation ability remain unclear. In this study, the physiological response of Y16C to glyphosate stimulation was characterized at the cellular level. The results indicated that, in the process of glyphosate degradation, Y16C induced a series of physiological responses in the membrane potential, reactive oxygen species levels, and apoptosis. The antioxidant system of Y16C was activated to alleviate the oxidative damage caused by glyphosate. Furthermore, a novel gene, goW, was expressed in response to glyphosate. The gene product, GOW, is an enzyme that catalyzes glyphosate degradation, with putative structural similarities to glycine oxidase. GOW encodes 508 amino acids, with an isoelectric point of 5.33 and a molecular weight of 57.2 kDa, which indicates that it is a glycine oxidase. GOW displays maximum enzyme activity at 30 °C and pH 7.0. Additionally, most of the metal ions exhibited little influence on the enzyme activity except for Cu²⁺. Finally, with glyphosate as the substrate, the catalytic efficiency of GOW was higher than that of glycine, although opposite results were observed for the affinity. Taken together, the current study provides new insights to deeply understand and reveal the mechanisms of glyphosate degradation in bacteria.

Rapid Biodegradation of the Organophosphorus Insecticide Acephate by a Novel Strain Burkholderia sp. A11 and Its Impact on the Structure of the Indigenous Microbial Community

The acephate-degrading microbes that are currently available are not optimal. In this study, Burkholderia sp. A11, an efficient degrader of acephate, presented an acephate-removal efficiency of 83.36% within 56 h (100 mg·L^-1). The A11 strain has a broad substrate tolerance and presents a good removal effect in the concentration range 10-1600 mg·L^-1. Six metabolites from the degradation of acephate were identified, among which the main products were methamidophos, acetamide, acetic acid, methanethiol, and dimethyl disulfide. The main degradation pathways involved include amide bond breaking and phosphate bond hydrolysis. Moreover, strain A11 successfully colonized and substantially accelerated acephate degradation in different soils, degrading over 90% of acephate (50-200 mg·kg^-1) within 120 h. 16S rDNA sequencing results further confirmed that the strain A11 gradually occupied a dominant position in the soil microbial communities, causing slight changes in the diversity and composition of the indigenous soil microbial community structure.

Phosphorylation of Alkali Extracted Mandua Starch by STPP/STMP for Improving Digestion Resistibility

The chemical modifications of starch granules have been adopted to improve the characteristics, viz., paste clarity, resistant starch content, thermal stability, and so forth. The modified starch has been applied as a biopolymer in developing various preparations of food, nutraceutical, and pharmaceutical importance. The present work is focused on phosphorylation of alkali extracted mandua starch for improving digestion resistibility. The phosphorylation of mandua starch extracted from grains of Eleusine coracana (family Poaceae) was carried out by sodium tripolyphosphate/sodium trimetaphosphate at alkaline pH. After chemical treatment of mandua starch, the resistant starch (RS) content was increased significantly. The digestibility of chemically modified starch (CMS) was decreased down after treating by the phosphorylation process. The digestibility of CMS and alkali extracted mandua starch (AMS) in simulated intestinal fluid was found to be 32.64 ± 1.98% w/w and 61.12 ± 2.54% w/w, respectively. After chemical modification of mandua starch, a decrement was observed in amylose content, water-binding capacity, and swelling power. In the three-stage decomposition pattern of CMS studied by thermal gravimetric analysis, the significant changes in decomposition behavior also affirmed the impact of cross-linking in the improvement of stability of internal structure and resistibility of starch. In Fourier transform infrared (FTIR), the formation of the P=O bond was observed in CMS at 1250 cm^-1. The acute and sub-acute toxicity studies in terms of behavioral, haematological, and enzymological parameters for CMS were not different significantly from AMS and control (p > 0.05). The cellular architecture of the liver and the kidney were found normal after consumption of CMS. The results revealed that significant increment in RS fraction occurred after cross-linking of mandua starch. The prepared starch may be applied in developing various formulations of food and pharmaceutical importance.

Bacteriophage-based biocontrol technology to enhance the efficiency of wastewater treatment and reduce targeted bacterial biofilms

Wastewater treatment is an essential process for public health and a sustainable ecosystem. Inadequate wastewater treatment can lead to the release of organic and inorganic pollutants and pathogenic bacteria into the receiving waters which could be further utilized for recreation purposes. The interaction between bacteriophage and bacteria in a wastewater treatment plant plays a major role in maintaining the treatment process. Phage therapy has been proposed as an alternative to conventional treatment methods as bacteriophages can be used on specific targets and leave useful bacteria unharmed. The bacterial species, which are responsible for bulking, foaming, and biofilm formation in a wastewater treatment plant (WWTP) have been identified and their respective phages are isolated to control their growth. Phages with lytic life cycles are preferred to lysogenic. Lytic phages can kill the specific target as they lyse the cell, infect most of the hosts, and have an immediate effect on controlling problems caused by bacteria in a WWTP. The bacteriophages such as T7, SPI1, GTE7, PhaxI, MAG1, MAG2, ϕPh_Se01, ϕPh_Se02, and Bxb1 have been investigated for the removal of bacterial biofilms from wastewater. Novel experimental setups have improved the efficiency of phage therapy in small-scale and pilot-scale experiments. Much more in-depth knowledge of the microbial community and their interaction would help promote the usage of phage therapy in large-scale wastewater treatments. This paper has covered the recent advancements in phage therapy as an effective biocontrol of pathogenic bacteria in the wastewater treatment process and has looked at certain shortcomings that have to be improved.

Bioremediation potential of laccase for catalysis of glyphosate, isoproturon, lignin, and parathion: Molecular docking, dynamics, and simulation

The present study aimed to investigate the catalytic degradation produced by laccase in the detoxification of glyphosate, isoproturon, lignin polymer, and parathion. We explored laccase-glyphosate, laccase-lignin polymer, laccase-isoproturon, and laccase-parathion using molecular docking (MD) and molecular dynamics simulation (MDS) approaches. The results suggest that laccase interacts well with glyphosate, lignin polymer, isoproturon, and parathion during biodegradation. We calculated the root mean square deviations (RMSD) of laccase-glyphosate, laccase-lignin polymer, laccase-isoproturon, and laccase-parathion as 0.24 ± 0.02, 0.59 ± 0.32, 0.43 ± 0.07, and 0.43 ± 0.06 nm, respectively. In an aqueous solution, the stability of laccase with glyphosate, lignin polymer, isoproturon, and parathion is mediated through the formation of hydrophobic interactions, hydrogen bonds, and van der Waals interactions. The presence of xenobiotic toxic compounds in the active site changed the conformation of laccase. MDS of the laccase-substrate complexes confirmed their stability during catalytic degradation. Laccase assay results confirmed that the degradation of syringol, dihydroconiferyl alcohol, guaiacol, parathion, isoproturon, and glyphosate were 100%, 99.31%, 95.69%, 60.96%, 54.51%, and 48.34% within 2 h, respectively. Taken together, we describe a novel method to understand the molecular-level biodegradation of xenobiotic compounds through laccase and its potential application in contaminant removal.

Environmental occurrence, toxicity concerns, and biodegradation of neonicotinoid insecticides

Neonicotinoids (NEOs) are fourth generation pesticides, which emerged after organophosphates, pyrethroids, and carbamates and they are widely used in vegetables, fruits, cotton, rice, and other industrial crops to control insect pests. NEOs are considered ideal substitutes for highly toxic pesticides. Multiple studies have reported NEOs have harmful impacts on non-target biological targets, such as bees, aquatic animals, birds, and mammals. Thus, the remediation of neonicotinoid-sullied environments has gradually become a concern. Microbial degradation is a key natural method for eliminating neonicotinoid insecticides, as biodegradation is an effective, practical, and environmentally friendly strategy for the removal of pesticide residues. To date, several neonicotinoid-degrading strains have been isolated from the environment, including Stenotrophomonas maltophilia, Bacillus thuringiensis, Ensifer meliloti, Pseudomonas stutzeri, Variovorax boronicumulans, and Fusarium sp., and their degradation properties have been investigated. Furthermore, the metabolism and degradation pathways of neonicotinoids have been broadly detailed. Imidacloprid can form 6-chloronicotinic acid via the oxidative cleavage of guanidine residues, and it is then finally converted to non-toxic carbon dioxide. Acetamiprid can also be demethylated to remove cyanoimine (=N-CN) to form a less toxic intermediate metabolite. A few studies have discussed the neonicotinoid toxicity and microbial degradation in contaminated environments. This review is focused on providing an in-depth understanding of neonicotinoid toxicity, microbial degradation, catabolic pathways, and information related to the remediation process of NEOs. Future research directions are also proposed to provide a scientific basis for the risk assessment and removal of these pesticides.

Cyanophage technology in removal of cyanobacteria mediated harmful algal blooms: A novel and eco-friendly method

Cyanophages are highly abundant specific viruses that infect cyanobacterial cells. In recent years, the cyanophages and cyanobacteria interactions drew attention to environmental restoration due to their discovery in marine and freshwater systems. Cyanobacterial harmful algal blooms (cyanoHABs) are increasing throughout the world and contaminating aquatic ecosystems. The blooms cause severe environmental problems including unpleasant odors and cyanotoxin production. Cyanotoxins have been reported to be lethal agents for living beings and can harm animals, people, aquatic species, recreational activities, and drinking water reservoirs. Biological remediation of cyanoHABs in aquatic systems is a sustainable and eco-friendly approach to increasing surface water quality. Therefore, this study compiles the fragmented information with the solution of removal of cyanoHABs using cyanophage therapy techniques. To date, scant information exists in terms of bloom formation, cyanophage occurrence, and mode of action to remediate cyanoHABs. Overall, this study illustrates cyanobacterial toxin production and its impacts on the environment, the mechanisms involved in the cyanophage-cyanobacteria interaction, and the application of cyanophages for the removal of toxic cyanobacterial blooms.

System biology analysis of endosulfan biodegradation in bacteria and its effect in other living systems: modeling and simulation studies

Endosulfan is a broadly applied cyclodiene insecticide which has been in use across 80 countries since last 5 decades. Owing to its recalcitrant nature, endosulfan residues have been reported from air, water and soil causing toxicity to various non-target organisms. Microbial decontamination of endosulfan has been reported previously by several authors. In the current study, we have evaluated the pathways of endosulfan degradation and its hazardous impact on other living beings including insects, humans, plants, aquatic life and environment by in-silico methods. For establishment of the endosulfan metabolism in different ecosystems, cell designer was employed. The established model was thereafter assessed and simulated to understand the biochemical and physiological metabolism of the endosulfan in various systems of the network. Topological investigation analysis of the endosulfan metabolism validated the presence of 207 nodes and 274 edges in the network. We have concluded that biomagnification of the endosulfan generally occurs in the various elements of the ecosystem. Dynamics study of endosulfan degrading enzymes suggested the important role of monooxygenase I, II and hydrolase in endosulfan bioremediation. Endosulfan shows toxicity in human beings, fishes and plants, however it is biodegraded by the microbes. To date, there are no reports of in- silico analysis of bioremediation of endosulfan and its hazardous effects on the environment. Thus, this report can be important in terms of modelling and simulation of biodegradation network of endosulfan and similar compounds and their impact on several other systems.Communicated by Ramaswamy H. Sarma.

Electro-oxidation of heavy metals contaminated water using banana waste-derived activated carbon and Fe3O4 nanocomposites

The main objective of this study was to banana waste-derived activated carbon (BWAC) make a high pore surface area was prepared and composited with Fe₃O₄ via a facile hydrothermal method. Various physiochemical characteristics of the prepared samples were evaluated using XRD, FTIR, FESEM, Raman Spectroscopy and XPS analysis. In addition, cyclic voltammetry and electrochemical impedance spectroscopy analyses were performed to determine the electrochemical properties of the prepared samples. The Fe₃O₄/BWAC sample showed a higher capacitance (285 F g^-1) than BWAC at the same scan rate of 10 mV s^-1. The capacitive deionization (CDI) cell configuration was varied, and its electro-sorption and defluoridization efficiencies were analyzed during the lead (Pb²⁺) removal 90%. An asymmetric combination of electrodes in the CDI cell exhibited better heavy metal removal performance, possibly due to the synergistic effect of the high surface area and the balance between the active adsorption site and the overlapping effect of the EDL. As a result, Fe₃O₄/BWAC could be a potential resource for supercapacitors and CDI electrodes, and the novel Fe₃O₄/BWAC nanocomposites outstanding performance suggests that they could be helpful for future energy storage and environmental applications.

Insights into the microbial degradation and resistance mechanisms of glyphosate

Glyphosate, as one of the broad-spectrum herbicides for controlling annual and perennial weeds, is widely distributed in various environments and seriously threatens the safety of human beings and ecology. Glyphosate is currently degraded by abiotic and biotic methods, such as adsorption, photolysis, ozone oxidation, and microbial degradation. Of these, microbial degradation has become the most promising method to treat glyphosate because of its high efficiency and environmental protection. Microorganisms are capable of using glyphosate as a phosphorus, nitrogen, or carbon source and subsequently degrade glyphosate into harmless products by cleaving C-N and C-P bonds, in which enzymes and functional genes related to glyphosate degradation play an indispensable role. There have been many studies on the abiotic and biotic treatment technologies, microbial degradation pathways and intermediate products of glyphosate, but the related enzymes and functional genes involved in the glyphosate degradation pathways have not been further discussed. There is little information on the resistance mechanisms of bacteria and fungi to glyphosate, and previous investigations of resistance mechanisms have mainly focused on how bacteria resist glyphosate damage. Therefore, this review explores the microorganisms, enzymes and functional genes related to the microbial degradation of glyphosate and discusses the pathways of microbial degradation and the resistance mechanisms of microorganisms to glyphosate. This review is expected to provide reference for the application and improvement of the microbial degradation of glyphosate in microbial remediation.

Estimation of shelf-life of Balachaturbhadrika syrup containing different sweetening agents

Background: Stability being the potential of any particular preparation in a noteworthy container/closure set up to abide within its physical, microbiological, chemical, toxicological, therapeutic stipulations which is invariably manifested in respect of shelf-life. Main aim of present analysis is to ascertain the shelf-life of Balachaturbhadrika Syrup prepared with different sweetening agent viz. Sugar (Sample I), Jaggery (Sample II), Honey (Sample III) and Stevia (Sample IV). The study was performed under accelerated storage conditions. Methods: Accelerated stability study was conducted for 3 months as per ICH guideline QA1 (R2) and the changes in physico-chemical traits viz. pH, refractive index, specific gravity, alcohol content and sedimentation rate were inscripted for quadruple alliance of 0, 15, 30 and 90 days. The statistical analysis was done using mean ± SEM, student paired t- test and Analysis of Variance (ANOVA). Results: Remarkable changes were found in both organoleptic and physico-chemical traits. Extrapolated shelf-life of Sample I, II, III and IV from physico-chemical attributes in conformity with the weather conditions prevailing in India were 73.514 month (6.12 year), 76.080 month (6.340 year), 58.05 month (4.83 year) and 37.05 month (3.09 year) respectively. Conclusion: The syrups prepared using Sugar, Jaggery and Honey were found to be more stable than those prepared using Stevia as the value of physical parameters was found more prominent for honey, jaggery and sugar.

Effects of Free or Immobilized Bacterium Stenotrophomonas acidaminiphila Y4B on Glyphosate Degradation Performance and Indigenous Microbial Community Structure

The overuse of glyphosate has resulted in serious environmental contamination. Thus, effective techniques to remove glyphosate from the environment are required. Herein, we isolated a novel strain Stenotrophomonas acidaminiphila Y4B, which completely degraded glyphosate and its major metabolite aminomethylphosphonic acid (AMPA). Y4B degraded glyphosate over a broad concentration range (50-800 mg L^-1), with a degradation efficiency of over 98% within 72 h (50 mg L^-1). Y4B degraded glyphosate via the AMPA pathway by cleaving the C-N bond, followed by degradation of AMPA and subsequent metabolism. Y4B demonstrated strong competitiveness and substantially accelerated the degradation of glyphosate in different soils, degrading 71.93 and 89.81% of glyphosate (400 mg kg^-1) within 5 days in sterile and nonsterile soils, respectively. The immobilized cells of Y4B were more efficient than their free cells and they displayed excellent biodegradation efficiency in a sediment-water system. Taken together, Y4B is an ideal degrader for the bioremediation of glyphosate-contaminated sites.

Novel mechanism and degradation kinetics of allethrin using Bacillus megaterium strain HLJ7 in contaminated soil/water environments

As a common pyrethroid insecticide, allethrin is widely used for various purposes in agriculture and home applications. At present, allethrin residues have been frequently detected worldwide, yet little is known about the kinetics and degradation mechanisms of this insecticide. In this study, a highly efficient allethrin-degrading bacterium, Bacillus megaterium strain HLJ7, was obtained through enrichment culture technology. Strain HLJ7 can remove 96.5% of 50 mg L^-1 allethrin in minimal medium within 11 days. The first-order kinetic analysis of degradation demonstrated that the half-life of allethrin degradation by strain HLJ7 was 3.56 days, which was significantly shorter than the 55.89 days of the control. The Box-Behnken design of the response surface method optimized the degradation conditions for strain HLJ7: temperature 32.18 °C, pH value 7.52, and inoculation amount 1.31 × 10⁷ CFU mL^-1. Using Andrews equation, the optimal concentration of strain HLJ7 to metabolize allethrin was determined to be 21.15 mg L^-1, and the maximum specific degradation rate (q_max), half-rate constant (K_s) and inhibition coefficient (K_i) were calculated to be 1.80 d^-1, 1.85 mg L^-1 and 68.13 mg L^-1, respectively. Gas chromatography-mass spectrometry identified five intermediate metabolites, suggesting that allethrin could be degraded firstly by cleavage of its carboxylester bond, followed by degradation of the five-carbon ring and subsequent metabolism. The results of soil remediation experiments showed that strain HLJ7 has excellent bioremediation potential in the soils. After 15 days of treatment, about 70.8% of the initial allethrin (50 mg kg^-1) was removed and converted into nontoxic intermediate metabolites, and its half-life was significantly reduced in the soils. Taken together, these findings shed light on the degradation mechanisms of allethrin and also highlight the promising potentials of B. megaterium HLJ7 in bioremediation of allethrin-comtaminated environment.

Microalgae-based removal of pollutants from wastewaters: Occurrence, toxicity and circular economy

The natural and anthropogenic sources of water bodies are contaminated with diverse categories of pollutants such as antibiotics, pharmaceuticals, pesticides, heavy metals, organic compounds, and other industrial chemicals. Depending on the type and the origin of the pollutants, the degree of contamination can be categorized into lower to higher concentrations. Therefore, the removal of hazardous chemicals from the environment is an important aspect. The physical, chemical and biological approaches have been developed and implemented to treat wastewaters. The microbial and algal treatment methods have emerged as a growing field due to their eco-friendly and sustainable approach. Particularly, microalgae emerged as a potential organism for the treatment of contaminated water bodies. The microalgae of the genera Chlorella, Anabaena, Ankistrodesmus, Aphanizomenon, Arthrospira, Botryococcus, Chlamydomonas, Chlorogloeopsis, Dunaliella, Haematococcus, Isochrysis, Nannochloropsis, Porphyridium, Synechococcus, Scenedesmus, and Spirulina reported for the wastewater treatment and biomass production. Microalgae have the potential for adsorption, bioaccumulation, and biodegradation. The microalgal strains can mitigate the hazardous chemicals via their diverse cellular mechanisms. Applications of the microalgae strains were found to be effective for sustainable developments and circular economy due to the production of biomass with the utilization of pollutants.

Identification of Key Regulatory Pathways of Basidiocarp Formation in Pleurotus spp. Using Modeling, Simulation and System Biology Studies

Pleurotus (Oyster mushroom) is an important cultivated edible mushroom across the world. It has several therapeutic effects as it contains various useful bio-molecules. The cultivation and crop management of these basidiomycete fungi depends on many extrinsic and intrinsic factors such as substrate composition, growing environment, enzymatic properties, and the genetic makeup, etc. Moreover, for efficient crop production, a comprehensive understanding of the fundamental properties viz. intrinsic–extrinsic factors and genotype-environment interaction analysis is required. The present study explores the basidiocarp formation biology in Pleurotus mushroom using an in silico response to the environmental factors and involvement of the major regulatory genes. The predictive model developed in this study indicates involvement of the key regulatory pathways in the pinhead to fruit body development process. Notably, the major regulatory pathways involved in the conversion of mycelium aggregation to pinhead formation and White Collar protein (PoWC1) binding flavin-chromophore (FAD) to activate respiratory enzymes. Overall, cell differentiation and higher expression of respiratory enzymes are the two important steps for basidiocarp formation. PoWC1 and pofst genes were participate in the structural changes process. Besides this, the PoWC1 gene is also involved in the respiratory requirement, while the OLYA6 gene is the triggering point of fruiting. The findings of the present study could be utilized to understand the detailed mechanism associated with the basidiocarp formation and to cultivate mushrooms at a sustainable level.

Preclinical Safety Assessment of Chemically Cross-Linked Modified Mandua Starch: Acute and Sub-Acute Oral Toxicity Studies in Swiss Albino Mice

In the present era, 28 days of repeated-dose-toxicity study following the Organization for Economic Cooperation and Development (OECD) guidelines 407 is compulsory for every drug to go through phase 1 clinical trials. The increasing demand for high-resistant starch containing nutraceuticals and the applicability of modified starch in development of targeted drug delivery inspired us to investigate the toxic profile of mandua starch chemically cross-linked by epichlorohydrin and compare it with alkali-isolated starch in healthy adult Swiss albino mice, which can be the first step for exploring the use of epichlorohydrin-cross-linked mandua starch (ECC-MS) as a pharmaceutical excipient. Histopathological examinations of the kidney and liver did not expose noteworthy abnormalities in the treated mice. There were no clinical and mortality symptoms of toxicity observed during the repeated-dose-toxicity study. The oral consumption of ECC-MS did not pose any harm as it was neither lethal nor had any harmful hematological, biochemical, psychological, anatomical, and behavioral effects. The use of ECC-MS and alkali-isolated mandua starch (AMS) was found safe at a dose of 2000 mg/kg body weight in the acute toxicity study and at doses of 2000, 1500, and 1000 mg/kg body weight in the sub-acute toxicity study as no detrimental effects were observed after oral administration in mice for 14 and 28 days, respectively.

Himalayan Microbiomes for Agro-environmental Sustainability: Current Perspectives and Future Challenges

The Himalayas are one of the most mystical, yet least studied terrains of the world. One of Earth's greatest multifaceted and diverse montane ecosystems is also one of the thirty-four global biodiversity hotspots of the world. These are supposed to have been uplifted about 60-70 million years ago and support, distinct environments, physiography, a variety of orogeny, and great biological diversity (plants, animals, and microbes). Microbes are the pioneer colonizer of the Himalayas that are involved in various bio-geological cycles and play various significant roles. The applications of Himalayan microbiomes inhabiting in lesser to greater Himalayas have been recognized. The researchers explored the applications of indigenous microbiomes in both agricultural and environmental sectors. In agriculture, microbiomes from Himalayan regions have been suggested as better biofertilizers and biopesticides for the crops growing at low temperature and mountainous areas as they help in the alleviation of cold stress and other biotic stresses. Along with alleviation of low temperature, Himalayan microbes also have the capability to enhance plant growth by availing the soluble form of nutrients like nitrogen, phosphorus, potassium, zinc, and iron. These microbes have been recognized for producing plant growth regulators (abscisic acid, auxin, cytokinin, ethylene, and gibberellins). These microbes have been reported for bioremediating the diverse pollutants (pesticides, heavy metals, and xenobiotics) for environmental sustainability. In the current perspectives, present review provides a detailed discussion on the ecology, biodiversity, and adaptive features of the native Himalayan microbiomes in view to achieve agro-environmental sustainability.

Algae in wastewater treatment, mechanism, and application of biomass for production of value-added product

The pollutants can enter water bodies at various point and non-point sources, and wastewater discharge remains a major pathway. Wastewater treatment effectively reduces contaminants, it is expensive and requires an eco-friendly and sustainable alternative approach to reduce treatment costs. Algae have recently emerged as a potentially cost-effective method to remediate toxic pollutants through the mechanism of biosorption, bioaccumulation, and intracellular degradation. Hence, before discharging the wastewater into the natural environment better solutions for environmental resource recovery and sustainable developments can be applied. More importantly, algae are a potential feedstock material for various industrial applications such as biofuel production. Currently, researchers are developing algae as a source for pharmaceuticals, biofuels, food additives, and bio-fertilizers. This review mainly focused on the potential of algae and their specific mechanisms involved in wastewater treatment and energy recovery systems leading to important industrial precursors. The review is highly beneficial for scientists, wastewater treatment plant operators, freshwater managers, and industrial communities to support the sustainable development of natural resources.

Indigenous bacterial consortium-mediated cypermethrin degradation in the presence of organic amendments and Zea mays plants

Cypermethrin is a toxic pyrethroid insecticide that is widely used in agricultural and household activities. One of the most serious issues is its persistence in the environment, because it is easily transported to the soil and aquatic ecosystem. The biodegradation of cypermethrin is emerging as an environmentally friendly method for large-scale treatment. This study examined the application of a novel binary bacterial combination-based (Bacillus thuringiensis strain SG4 and Bacillus sp. strain SG2) approach used for the enhanced degradation of cypermethrin from the environment. The bacterial strains degraded cypermethrin (80% and 85%) in the presence of external nitrogen sources (KNO₃ and NaNO₃). Furthermore, when immobilized in agar disc beads, the co-culture degraded cypermethrin (91.3%) with a half-life (t_1/2) of 4.3 days compared to 4.9 days using sodium alginate beads. Cereal straw, farmyard manure, press mud compost, fresh cow dung, and gypsum were used as organic amendments in the soil to stimulate cypermethrin degradation. Cereal straw promoted the fastest cypermethrin degradation among the different organic amendments tested, with a t_1/2 of 4.4 days. The impact of cypermethrin-degrading bacterial consortium on cypermethrin rhizoremediation was also investigated. Bacterial inoculums exhibited beneficial effects on plant biomass. Moreover, Zea mays and the bacterial partnership substantially enhanced cypermethrin degradation in soil. Six intermediate metabolites were detected during the degradation of cypermethrin, indicating that cypermethrin could be degraded first by the hydrolysis of its carboxyl ester bond, followed by the cleavage of the diaryl linkage and subsequent metabolism. Our findings highlight the promising potential and advantages of the bacterial consortium for the bioremediation of a cypermethrin-contaminated environment.

Structural Modifications and Strategies for Native Starch for Applications in Advanced Drug Delivery

Pharmaceutical excipients are compounds or substances other than API which are added to a dosage form, these excipients basically act as carriers, binders, bulk forming agents, colorants, and flavouring agents, and few excipients are even used to enhance the activity of active pharmaceutical ingredient (API) and various more properties. However, despite of these properties, there are problems with the synthetic excipients such as the possibility of causing toxicity, inflammation, autoimmune responses, lack of intrinsic bioactivity and biocompatibility, expensive procedures for synthesis, and water solubility. However, starch as an excipient can overcome all these problems in one go. It is inexpensive, there is no toxicity or immune response, and it is biocompatible in nature. It is very less used as an excipient because of its high digestibility and swelling index, high glycemic index, paste clarity, film-forming property, crystalline properties, etc. All these properties of starch can be altered by a few modification processes such as physical modification, genetic modification, and chemical modification, which can be used to reduce its digestibility and glycemic index of starch, improve its film-forming properties, and increase its paste clarity. Changes in some of the molecular bonds which improve its properties such as binding, crystalline structure, and retrogradation make starch perfect to be used as a pharmaceutical excipient. This research work provides the structural modifications of native starch which can be applicable in advanced drug delivery. The major contributions of the paper are advances in the modification of native starch molecules such as physically, chemically, enzymatically, and genetically traditional crop modification to yield a novel molecule with significant potential for use in the pharmaceutical industry for targeted drug delivery systems.

Assessment of free radicals and reactive oxygen species milieu in nanoparticles adjuvanted outer membrane proteins vaccine against Salmonella typhi

In this study, calcium phosphate nanoparticles-based (STCNV) and montanide oil adjuvant vaccine (STOAV) containing outer membrane proteins (Omps) of S. Typhi were evaluated for inducing oxidative stress indicators [reduced glutathione (GSH), lipid peroxidation (LPO), catalase, superoxide dismutase (SOD), and total protein] in the tissues of mice after vaccination. The GSH levels though slightly high in the liver, kidney, and lungs of STCNV group were not significantly different from STOAV and the control group (STC). There was no significant difference in LPO levels in any group for any tissue. The significantly lower activities of catalase were observed in the kidney and lungs of the STCNV group as compared to STOAV and STC group, while in the liver, STCNV group revealed lower catalase activity in comparison to the control group. No significant difference in the SOD activities between the two vaccinated groups was observed. The total protein contents in all the organs showed no significant difference in the vaccinated and the control group. The vaccines may induce long-term inflammatory response and consequently damage vital organs; this study revealed no long-term oxidative stress in all the three vital organs, suggesting that these vaccines may not cause oxidative damages in the vital organs of mice.

Tetracycline bioremediation using the novel Serratia marcescens strain WW1 isolated from a wastewater treatment plant

Tetracycline pollution is an emerging threat in aquatic and terrestrial environments because of its widespread applications in human disease, livestock, and aquaculture. Present study, investigated the tetracycline degrading novel Serratia marcescens strain WW1, which was isolated from a wastewater treatment plant (WWTP). Toxicity analysis of tetracycline with strain WW1 indicates that its intermediate metabolites are not toxic for the indicator bacteria and algae. The degradation conditions for the tetracycline optimized using response surface methodology (RSM) were determined as: pH 6.0; temperature, 36 °C; tetracycline concentration, 20 mg L^-1; and inoculum size, 100 μL (OD∼0.5). The strain WW1 was able to utilize tetracycline during the growth phase, and it degraded 89.5% of the tetracycline within 48 h. The degradation kinetics suggested the strain perform significant tetracycline removal with half-life (t_1/2) 239.04 and 12.44 h in control and treatments. Tetracycline and its intermediates were analyzed using High Performance Liquid Chromatography (HPLC) and Liquid Chromatography-Mass Spectroscopy (LC-MS). It was observed that strain WW1 could efficiently metabolize the tetracycline within 48 h of experiment. The ability of strain WW1 to degrade tetracycline justifies its use as an environmentally-useful bacterium. Therefore, the present study demonstrated that the degradation of antibiotics is possible using indigenous microbial strains.

Characterization of a novel glyphosate-degrading bacterial species, Chryseobacterium sp. Y16C, and evaluation of its effects on microbial communities in glyphosate-contaminated soil

Widespread use of the herbicide glyphosate in agriculture has resulted in serious environmental problems. Thus, environment-friendly technological solutions are urgently needed for the removal of residual glyphosate from soil. Here, we successfully isolated a novel bacterial strain, Chryseobacterium sp. Y16C, which efficiently degrades glyphosate and its main metabolite aminomethylphosphonic acid (AMPA). Strain Y16C was found to completely degrade glyphosate at 400 mg·L-1 concentration within four days. Kinetics analysis indicated that glyphosate biodegradation was concentration-dependent, with a maximum specific degradation rate, half-saturation constant, and inhibition constant of 0.91459 d-1, 15.79796 mg·L-1, and 290.28133 mg·L-1, respectively. AMPA was identified as the major degradation product of glyphosate degradation, suggesting that glyphosate was first degraded via cleavage of its C-N bond prior to subsequent metabolic degradation. Strain Y16C was also found to tolerate and degrade AMPA at concentrations up to 800 mg·L-1. Moreover, strain Y16C accelerated glyphosate degradation in soil indirectly by inducing a slight alteration in the diversity and composition of soil microbial community. Taken together, our results suggest that strain Y16C may be a potential microbial agent for bioremediation of glyphosate-contaminated soil.

Biotechnological tools to elucidate the mechanism of pesticide degradation in the environment

Pesticides are widely used in agriculture, households, and industries; however, they have caused severe negative effects on the environment and human health. To clean up pesticide contaminated sites, various technological strategies, i.e. physicochemical and biological, are currently being used throughout the world. Biological approaches have proven to be a viable method for decontaminating pesticide-contaminated soils and water environments. The biological process eliminates contaminants by utilizing microorganisms' catabolic ability. Pesticide degradation rates are influenced by a variety of factors, including the pesticide's structure, concentration, solubility in water, soil type, land use pattern, and microbial activity in the soil. There is currently a knowledge gap in this field of study because researchers are unable to gather collective information on the factors affecting microbial growth, metabolic pathways, optimal conditions for degradation, and genomic, transcriptomic, and proteomic changes caused by pesticide stress on the microbial communities. The use of advanced tools and omics technology in research can bridge the existing gap in our knowledge regarding the bioremediation of pesticides. This review provides new insights on the research gaps and offers potential solutions for pesticide removal from the environment through the use of various microbe-mediated technologies.

Microbial Interventions in Bioremediation of Heavy Metal Contaminants in Agroecosystem

Soil naturally comprises heavy metals but due to the rapid industrialization and anthropogenic events such as uncontrolled use of agrochemicals their concentration is heightened up to a large extent across the world. Heavy metals are non-biodegradable and persistent in nature thereby disrupting the environment and causing huge health threats to humans. Exploiting microorganisms for the removal of heavy metal is a promising approach to combat these adverse consequences. The microbial remediation is very crucial to prevent the leaching of heavy metal or mobilization into the ecosystem, as well as to make heavy metal extraction simpler. In this scenario, technological breakthroughs in microbes-based heavy metals have pushed bioremediation as a promising alternative to standard approaches. So, to counteract the deleterious effects of these toxic metals, some microorganisms have evolved different mechanisms of detoxification. This review aims to scrutinize the routes that are responsible for the heavy metal(loid)s contamination of agricultural land, provides a vital assessment of microorganism bioremediation capability. We have summarized various processes of heavy metal bioremediation, such as biosorption, bioleaching, biomineralization, biotransformation, and intracellular accumulation, as well as the use of genetically modified microbes and immobilized microbial cells for heavy metal removal.

Biofilm-mediated bioremediation is a powerful tool for the removal of environmental pollutants

Biofilm-mediated bioremediation is an attractive approach for the elimination of environmental pollutants, because of its wide adaptability, biomass, and excellent capacity to absorb, immobilize, or degrade contaminants. Biofilms are assemblages of individual or mixed microbial cells adhering to a living or non-living surface in an aqueous environment. Biofilm-forming microorganisms have excellent survival under exposure to harsh environmental stressors, can compete for nutrients, exhibit greater tolerance to pollutants compared to free-floating planktonic cells, and provide a protective environment for cells. Biofilm communities are thus capable of sorption and metabolization of organic pollutants and heavy metals through a well-controlled expression pattern of genes governed by quorum sensing. The involvement of quorum sensing and chemotaxis in biofilms can enhance the bioremediation kinetics with the help of signaling molecules, the transfer of genetic material, and metabolites. This review provides in-depth knowledge of the process of biofilm formation in microorganisms, their regulatory mechanisms of interaction, and their importance and application as powerful bioremediation agents in the biodegradation of environmental pollutants, including hydrocarbons, pesticides, and heavy metals.

Microbial adaptation and impact into the pesticide's degradation

The imprudent use of agrochemicals to control agriculture and household pests is unsafe for the environment. Hence, to protect the environment and diversity of living organisms, the degradation of pesticides has received widespread attention. There are different physical, chemical, and biological methods used to remediate pesticides in contaminated sites. Compared to other methods, biological approaches and their associated techniques are more effective, less expensive and eco-friendly. Microbes secrete several enzymes that can attach pesticides, break down organic compounds, and then convert toxic substances into carbon and water. Thus, there is a lack of knowledge regarding the functional genes and genomic potential of microbial species for the removal of emerging pollutants. Here we address the knowledge gaps by highlighting systematic biology and their role in adaptation of microbial species from agricultural soils with a history of pesticide usage and profiling shifts in functional genes and microbial taxa abundance. Moreover, by co-metabolism, the microbial species fulfill their nutritional requirements and perform more efficiently than single microbial-free cells. But in an open environment, free cells of microbes are not much prominent in the degradation process due to environmental conditions, incompatibilities with mechanical equipment and difficulties associated with evenly distributing inoculum through the agroecosystem. This review highlights emerging techniques involving the removal of pesticides in a field-scale environment like immobilization, biobed, biocomposites, biochar, biofilms, and bioreactors. In these techniques, different microbial cells, enzymes, natural fibers, and strains are used for the effective biodegradation of xenobiotic pesticides.