Optically selective catalyst design with minimized thermal emission for facilitating photothermal catalysis

Converting solar energy into fuels is pursued as an attractive route to reduce dependence on fossil fuel. In this context, photothermal catalysis is a very promising approach through converting photons into heat to drive catalytic reactions. There are mainly three key factors that govern the photothermal catalysis performance: maximized solar absorption, minimized thermal emission and excellent catalytic property of catalyst. However, the previous research has focused on improving solar absorption and catalytic performance of catalyst, largely neglected the optimization of thermal emission. Here, we demonstrate an optically selective catalyst based Ti3C2Tx Janus design, that enables minimized thermal emission, maximized solar absorption and good catalytic activity simultaneously, thereby achieving excellent photothermal catalytic performance. When applied to Sabatier reaction and reverse water-gas shift (RWGS) as demonstrations, we obtain an approximately 300% increase in catalytic yield through reducing the thermal emission of catalyst by ~70% under the same irradiation intensity. It is worth noting that the CO2 methanation yield reaches 3317.2 mmol gRu-1 h-1 at light power of 2 W cm-2, setting a performance record among catalysts without active supports. We expect that this design opens up a new pathway for the development of high-performance photothermal catalysts.

Recent Advances in Non-Ti MXenes: Synthesis, Properties, and Novel Applications

One of the most fascinating 2D nanomaterials (NMs) ever found is various members of MXene family. Among them, the titanium-based MXenes, with more than 70% of publication-related investigations, are comparatively well studied, producing fundamental foundation for the 2D MXene family members with flexible properties, familiar with a variety of advanced novel technological applications. Nonetheless, there are still more candidates among transitional metals (TMs) that can function as MXene NMs in ways that go well beyond those that are now recognized. Systematized details of the preparations, characteristics, limitations, significant discoveries, and uses of the novel M-based MXenes (M-MXenes), where M stands for non-Ti TMs (M = Sc, V, Cr, Y, Zr, Nb, Mo, Hf, Ta, W, and Lu), are given. The exceptional qualities of the 2D non-Ti MXene outperform standard Ti-MXene in several applications. There is many advancement in top-down as well as bottom-up production of MXenes family members, which allows for exact control of the M-characteristics MXene NMs to contain cutting-edge applications. This study offers a systematic evaluation of existing research, covering everything in producing complex M-MXenes from primary limitations to the characterization and selection of their applications in accordance with their novel features. The development of double metal combinations, extension of additional metal candidates beyond group-(III-VI)B family, and subsequent development of the 2D TM carbide/TMs nitride/TM carbonitrides to 2D metal boride family are also included in this overview. The possibilities and further recommendations for the way of non-Ti MXene NMs are in the synthesis of NMs will discuss in detail in this critical evaluation.

Indirect and direct electronic transitions and electron transport properties of van der Waals NbOCl2

In this paper, the optical and electron transport properties of the two-dimensional (2D) van der Waals (vdW) niobium oxide dichloride (NbOCl2) crystal with extremely high second-order nonlinear coefficients are investigated theoretically. We found that the strong absorption of NbOCl2 in the infrared region is caused by the indirect transition accompanied by phonons and confirmed that the interaction between layers is very weak. However, the study of electron transport properties shows that the interlayer interaction of NbOCl2 has a certain degree of influence on the scalability of electrical and optical properties. Because of the strong anisotropy of the NbOCl2 material, it will be a more optimized choice for constructing on-chip photoelectric or thermal devices in the Nb-Cl-Nb direction.

Semiconducting Properties of Delaminated Titanium Nitride Ti4N3Tx MXene with Gate-Tunable Electrical Conductivity

MXenes have garnered significant attention due to their atomically thin two-dimensional structure with metallic electronic properties. However, it has not yet been fully achieved to discover semiconducting MXenes to implement them into gate-tunable electronics such as field-effect transistors and phototransistors. Here, a semiconducting Ti4N3Tx MXene synthesized by using a modified oxygen-assisted molten salt etching method under ambient conditions, is reported. The oxygen-rich synthesis environment significantly enhances the etching reaction rate and selectivity of Al from a Ti4AlN3 MAX phase, resulting in well-delaminated and highly crystalline Ti4N3Tx MXene with minimal defects and high content of F and O, which led to its improved hydrophobicity and thermal stability. Notably, the synthesized Ti4N3Tx MXene exhibited p-type semiconducting characteristics, including gate-tunable electrical conductivity, with a current on-off ratio of 5 × 103 and a hole mobility of ∼0.008 cm2 V-1 s-1 at 243 K. The semiconducting property crucial for thin-film transistor applications is evidently associated with the surface terminations and the partial substitution of oxygen in the nitrogen lattice, as corroborated by density functional theory (DFT) calculations. Furthermore, the synthesized Ti4N3Tx exhibits strong light absorption characteristics and photocurrent generation. These findings highlight the delaminated Ti4N3Tx as an emerging two-dimensional semiconducting material for potential electronic and optoelectronic applications.

Soft, Multifunctional MXene-Coated Fiber Microelectrodes for Biointerfacing

Flexible fiber-based microelectrodes allow safe and chronic investigation and modulation of electrically active cells and tissues. Compared to planar electrodes, they enhance targeting precision while minimizing side effects from the device-tissue mechanical mismatch. However, the current manufacturing methods face scalability, reproducibility, and handling challenges, hindering large-scale deployment. Furthermore, only a few designs can record electrical and biochemical signals necessary for understanding and interacting with complex biological systems. In this study, we present a method that utilizes the electrical conductivity and easy processability of MXenes, a diverse family of two-dimensional nanomaterials, to apply a thin layer of MXene coating continuously to commercial nylon filaments (30-300 μm in diameter) at a rapid speed (up to 15 mm/s), achieving a linear resistance below 10 Ω/cm. The MXene-coated filaments are then batch-processed into free-standing fiber microelectrodes with excellent flexibility, durability, and consistent performance even when knotted. We demonstrate the electrochemical properties of these fiber electrodes and their hydrogen peroxide (H2O2) sensing capability and showcase their applications in vivo (rodent) and ex vivo (bladder tissue). This scalable process fabricates high-performance microfiber electrodes that can be easily customized and deployed in diverse bioelectronic monitoring and stimulation studies, contributing to a deeper understanding of health and disease.

MXenes and MXene-Based Metal Hydrides for Solid-State Hydrogen Storage: A Review

Hydrogen-driven energy is fascinating among the everlasting energy sources, particularly for stationary and onboard transportation applications. Efficient hydrogen storage presents a key challenge to accomplishing the sustainability goals of hydrogen economy. In this regard, solid-state hydrogen storage in nanomaterials, either physically or chemically adsorbed, has been considered a safe path to establishing sustainability goals. Though metal hydrides have been extensively explored, they fail to comply with the set targets for practical utilization. Recently, MXenes, both in bare form and hybrid state with metal hydrides, have proven their flair in ascertaining the hydrides' theoretical and experimental hydrogen storage capabilities far beyond the fancy materials and current state-of-the-art technologies. This review encompasses the significant accomplishments achieved by MXenes (primarily in 2019-2024) for enhancing the hydrogen storage performance of various metal hydride materials such as MgH2, AlH3, Mg(BH4)2, LiBH4, alanates, and composite hydrides. It also discusses the bottlenecks of metal hydrides for hydrogen storage, the potential use of MXenes hybrids, and their challenges, such as reversibility, H2 losses, slow kinetics, and thermodynamic barriers. Finally, it concludes with a detailed roadmap and recommendations for mechanistic-driven future studies propelling toward a breakthrough in solid material-driven hydrogen storage using cost-effective, efficient, and long-lasting solutions.

Recent Progress in Thermoplastic Polyurethane/MXene Nanocomposites: Preparation, Flame-Retardant Properties and Applications

MXene, a promising two-dimensional nanomaterial, exhibits significant potential across various applications due to its multilayered structure, metal-like conductivity, solution processability, and surface functionalization capabilities. These remarkable properties facilitate the integration of MXenes and MXene-based materials into high-performance polymer composites. Regarding this, a comprehensive and well-structured up-to-date review is essential to provide an in-depth understanding of MXene/thermoplastic polyurethane nanocomposites. This review discusses various synthetic and modification methods of MXenes, current research progress and future potential on MXene/thermoplastic polyurethane nanocomposites, existing knowledge gaps, and further development. The main focus is on discussing strategies for modifying MXene-based compounds and their flame-retardant efficiency, with particular emphasis on understanding their mechanisms within the TPU matrix. Ultimately, this review addresses current challenges and suggests future directions for the practical utilization of these materials.

The synthesis and supercapacitor application of flexible free-standing Ti3C2Tx, Mo2TiC2Tx, and V4C3Tx MXene films

MXenes represent a fascinating category of two-dimensional materials made up of transition metal carbides and nitrides, currently attracting significant research attention, especially in energy storage. However, the electrochemical properties of MXene materials with varying elemental compositions may exhibit significant differences. In order to optimally select types of MXenes that are more suitable for energy storage and explore their energy storage mechanisms, three kinds of different elemental compositions of delaminated MXenes (d-Ti3C2Tx, d-Mo2TiC2Tx, and d-V4C3Tx) were prepared by solid-phase synthesis, liquid-phase etching, and mechanical exfoliation method, successively. The obtained single-layer or few-layer MXene nanosheets were self-assembled into flexible free-standing film electrodes via vacuum-assisted filtration, and the detailed material preparation and characterization can guide the synthesis of more MXenes. Furthermore, we conducted a comprehensive study on the effects of various aqueous electrolytes (3 M H2SO4, 3 M KOH, and 3 M Na2SO4) and temperatures (0 °C, 20 °C, and 40 °C) on their electrochemical performance. This work optimized the MXene types that are more suitable for electrochemical energy storage application (d-Ti3C2Tx and d-V4C3Tx), and also found that the V4C3Tx MXene has excellent rate performance and long cycling performance, and has guiding significance for the development of MXene materials in energy storage. More significantly, the d-V4C3Tx MXene exhibits exceptional specific capacitance in both acidic and alkaline electrolytes, reaching 292.0 F g-1 in 3 M H2SO4, the highest among the three types of MXenes, and 184.3 F g-1 in 3 M KOH, far surpassing the performance of the d-Mo2TiC2Tx and d-Ti3C2Tx MXenes (less than 100 F g-1 at 2 mV s-1). Furthermore, this reveals that H+ intercalation/deintercalation, showing pseudocapacitance characteristics, along with the large interlayer spacing play a vital role in energy storage for MXenes, and an asymmetric configuration is an effective means to improve the energy density of aqueous supercapacitors. The comparative analysis aims to enhance the understanding of MXene materials' potential in advanced energy storage systems.

Two-Dimensional M-Chalcogene Family with Tunable Superconducting, Topological, and Magnetic Properties

An interesting question is whether chalcogen atoms can emulate the role of carbon or boron elements stabilized between two transition metal layers, as observed in MXenes or MBenes. Here, we predict a new family of two-dimensional ternary compounds M4XY2 (where M = Pd, Y, Zr, etc.; X = S, Se, Te; and Y = Cl, Br, I), named M-chalcogene. Through first-principles calculations, we reveal diverse physical properties in these compounds, including superconducting, topological, and magnetic characteristics, where the bilayer transition metals play crucial roles. Moreover, the expected helical edge states and superconducting transition temperatures in Pd4SCl2 can be finely tuned by strains. Additionally, the Ti4SCl2 is predicted to be a topological insulator and shows promise as a gas sensor candidate for certain exotic gases. Our findings expand two-dimensional material families and provide promising platforms for diverse physical phenomena with efficient tunability by external stimuli for various applications.

V-MXenes for Energy Storage/Conversion Applications

MXenes, a two-dimensional (2D) material, exhibit excellent optical, electrical, chemical, mechanical, and electrochemical properties. Titanium-based MXene (Ti-MXene) has been extensively studied and serves as the foundation for 2D MXenes. However, other transition metals possess the potential to offer excellent properties in various applications. This comprehensive review aims to provide an overview of the properties, challenges, key findings, and applications of less-explored vanadium-based MXenes (V-MXenes) and their composites. The current trends in V-MXene and their composites for energy storage and conversion applications have been thoroughly summarized. Overall, this review offers valuable insights, identifies potential opportunities, and provides key suggestions for future advancements in the MXenes and energy storage/conversion applications.

Surface termination effects on Raman spectra of Ti3C2Tx MXenes: an in situ UHV analysis

Ti3C2Tx MXenes have typically a mixed surface termination of oxygen, hydroxyl and fluorine groups (Tx). In this work, we investigate the influence of the surface termination on the vibrational properties of Ti3C2Tx by performing thermal desorption and in situ Raman spectroscopy in ultra-high-vacuum (UHV). Significant changes in the Raman spectra occur after annealing above 600 °C, correlated with the desorption of approximately 80% of the fluorine termination, as confirmed by mass spectrometry and X-ray photoemission spectra. In particular, the intense Raman mode at 203 cm-1, usually attributed to a Ti-C-layer stretching vibration, is strongly damped upon fluorine desorption, while the broad spectral features between 220 and 680 cm-1, usually attributed to surface group vibrations, are not changing significantly. We show that the Raman spectra and the change induced by fluorine desorption are well represented by the phonon density of states instead of zone-center phonon modes. Disorder-induced Raman scattering strongly contributes to the Raman spectra. Moreover, due to the metallic nature of MXenes, charge density fluctuation scattering contributes as well. We show that the two scattering mechanisms, deformation potential and charge density fluctuation, may lead to opposite interpretations concerning the symmetry of the fluorine-related mode at 203 cm-1. This study provides new insights into the interpretation of the Raman spectra of MXenes, especially regarding the relation between surface chemistry and vibrational spectroscopy.

Applications of 2D Nanomaterials in Neural Interface

Neural interfaces are crucial conduits between neural tissues and external devices, enabling the recording and modulation of neural activity. However, with increasing demand, simple neural interfaces are no longer adequate to meet the requirements for precision, functionality, and safety. There are three main challenges in fabricating advanced neural interfaces: sensitivity, heat management, and biocompatibility. The electrical, chemical, and optical properties of 2D nanomaterials enhance the sensitivity of various types of neural interfaces, while the newly developed interfaces do not exhibit adverse reactions in terms of heat management and biocompatibility. Additionally, 2D nanomaterials can further improve the functionality of these interfaces, including magnetic resonance imaging (MRI) compatibility, stretchability, and drug delivery. In this review, we examine the recent applications of 2D nanomaterials in neural interfaces, focusing on their contributions to enhancing performance and functionality. Finally, we summarize the advantages and disadvantages of these nanomaterials, analyze the importance of biocompatibility testing for 2D nanomaterials, and propose that improving and developing composite material structures to enhance interface performance will continue to lead the forefront of this field.

Mechanism of the Terahertz Wave-MXene Interaction and Surface/Interface Chemistry of MXene for Terahertz Absorption and Shielding

ConspectusOver the past two decades, terahertz (THz) technology has undergone rapid development, driven by advancements and the growing demand for THz applications across various scientific and technological domains. As the cornerstone of THz technology, strong THz-matter interactions, especially realized as high THz intrinsic absorption in nanometer-thick materials, play a highly important role in various applications including but not limited to THz absorption/shielding, detection, etc. The rigorous electromagnetic theory has posited a maximum intrinsic absorption of 50% for electromagnetic waves by thin films, and the succinct impedance matching condition has also been formulated to guide the design of highly intrinsically absorbing materials. However, these theories face challenges when applied to the THz spectrum with an ultrabroad bandwidth. Existing thin films typically achieve a maximum intrinsic absorption within a narrow frequency range, significantly limiting the performance of THz absorbers and detectors. To date, both theoretical frameworks and experimental solutions are lacking in overcoming the challenge of achieving broadband maximum intrinsic absorption in the THz regime.In this Account, we describe how two-dimensional (2D) transition-metal carbide and/or nitride (MXene) films with nanometer thickness can realize the maximum intrinsic absorption in the ultrabroad THz band, which successfully addresses the forementioned longstanding issue. Surprisingly, traditional DC impedance matching theory fails to explain this phenomenon, while we instead propose a novel theory of AC impedance matching to provide a satisfactory explanation. By delving into the microscopic transport behavior of free electrons in MXene, we discover that intraflake transport dominates terahertz conductivity under THz wave excitation, while interflake transport primarily dictates DC conductivity. This not only elucidates the significant disparities between DC and AC impedance in MXenes but also underscores the suitability of AC impedance matching for achieving broadband THz absorption limits. Furthermore, we identify a high electron concentration and short relaxation time as crucial factors for achieving broadband maximum absorption in the THz regime. Although approaching the THz intrinsic absorbing limits, it still faces hurdles to the use of MXene in practical applications. First, diverse and uncontrollable terminations exist on the surface of MXene stemming from the synthesis process, which largely influence the electron structure and THz absorbing property of MXene. Second, MXene suffers from poor stability in the presence of oxygen and water. To address the above issues, we have undertaken distinctive works to precisely control the terminations and suppress the oxidation of MXene even at high temperature through surface and interface chemistry, such as low-temperature Lewis basic halide treatment and building a Ti3C2Tx/extracted bentonite (EB) interface. For practical application consideration, we proposed a copolymer-polyacrylic latex (PAL)-based MXene waterborne paint (MWP) with a strong intermolecular polar interaction between MWP and the substrate provided by the cyano group in PAL. This not only has strong THz EMI shielding/absorption efficiency but also can easily adhere to various substrates that are commonly used in the THz band. These studies may have significant implications for future applications of MXene nanofilms in THz optoelectronic devices.

Aptamer-Modified Nb2C Multifunctional Nanomedicine for Targeted Photothermal/Chemotherapy Combined Therapy of Tumor

The poor delivery efficiency of nanotherapeutic drugs and their potential off-target toxicity significantly limit their effectiveness and extensive application. An active targeting system with high efficiency and few side effects is a promising strategy for tumor therapy. Herein, a multifunctional nanomedicine Nb2C-PAA-DOX@Apt-M (NDA-M) was constructed for targeted photothermal/chemotherapy (PTT/CHT) combined tumor therapy. The specific targeting ability of aptamer could effectively enhance the absorption of nanomedicine by the MCF-7 cell. By employing Apt-M, the NDA-M nanosheets demonstrated targeted delivery to MCF-7 cells, resulting in enhanced intracellular drug concentration. Under 1060 nm laser irradiation, a rapid temperature increase of the NDA-M was observed within the tumor region to achieve PTT. Meanwhile, CHT was triggered when DOX release was induced by photothermal/acid stimulation. The experimental results demonstrated that aptamer-mediated targeting achieved enhanced PTT/CHT efficacy both in vitro and in vivo. Notably, NDA-M induced complete ablation of solid tumors without any adverse side effects in mice. This study demonstrated new and promising tactics for the development of nanomaterials for targeted tumor therapy.

Enhancing electrochemiluminescence for chloramphenicol detection based on the synergistic effect of doped Ti3C2 with ultrasound

Chloramphenicol (CAP) is known to be harmful to the environment and food, posing a threat to human health. Developing an effective and convenient method for detecting CAP is crucial. An electrochemiluminescence (ECL) biosensor has been designed for sensitive detection of CAP. The improved ECL behavior was attributed to the synergistic effect of N and P co-doped Ti3C2-Apt1 (N, P-Ti3C2-Apt1) nanoprobes and high intensity focused ultrasound (HIFU) pretreatment. The doping of N and P could improve the electrochemical performance of Ti3C2. HIFU pretreatment generated more reactive oxygen species (ROS) in the luminol-O2 system. N, P-Ti3C2 could aggregate and catalyze ROS, causing an increase in ECL intensity. Furthermore, N, P-Ti3C2 as a carrier loaded more aptamer, which could recognize CAP with high specificity. The detection limit was 0.01 ng/mL. This biosensor has been successfully applied in milk and environmental water samples, highlighting its potential in the field of food and environmental analysis.

Tuning the Surface Stability and Li/Na Storage of MXenes by Controlling the Surface Termination Coverage

2D transition metal carbides and/or nitrides, MXenes, are a class of widely studied materials with great potential for energy storage applications. The control of surface chemistry is an effective approach for preparing novel MXenes and modifying their electrochemical properties. However, an in-depth and systematic atomic-scale study of the effect of surface termination on MXene stability and electrochemical performance is scarce and thus is highly desired. Here, through high-throughput first-principles calculations, 28 stable chalcogen-functionalized M2CTz (M = V, Nb, and Ta, T = S, Se, and Te) under different chemical environments are identified. The reduction of termination coverage improves electrical conductivity but weakens in-plane stiffness. Intriguingly, based on charge transfer mechanism, the diffusion barrier of lithium/sodium atoms on the M2CTz exhibits a volcano-like relationship with termination coverage, and the ion diffusion channel formed in half termination coverage greatly accelerates lithium ion diffusion and returns to or exceeds sodium ion diffusion rate at full termination coverage. V2CSe2/Nb2CSz not only displays the large lithium/sodium capacity (592/409-466 mAhg-1) but also exhibits low barrier energy and open-circuit voltage, suggesting a promising candidate anode material for lithium/sodium-ion batteries. These findings provide insights into the design and fabrication of MXenes and tuning the electrochemical performance of MXenes by controlling termination coverage.

A Flexible Skin Bionic Thermally Comfortable Wearable for Machine Learning-Facilitated Ultrasensitive Sensing

Tremendous popularity is observed for multifunctional flexible electronics with appealing applications in intelligent electronic skins, human-machine interfaces, and healthcare sensing. However, the reported sensing electronics, mostly can hardly provide ultrasensitive sensing sensitivity, wider sensing range, and robust cycling stability simultaneously, and are limited of efficient heat conduction out from the contacted skin interface after wearing flexible electronics on human skin to satisfy thermal comfort of human skin. Inspired from the ultrasensitive tactile perception microstructure (epidermis/spinosum/signal transmission) of human skin, a flexible comfortably wearable ultrasensitive electronics is hereby prepared from thermal conductive boron nitride nanosheets-incorporated polyurethane elastomer matrix with MXene nanosheets-coated surface microdomes as epidermis/spinosum layers assembled with interdigitated electrode as sensing signal transmission layer. It demonstrates appealing sensing performance with ultrasensitive sensitivity (≈288.95 kPa-1), up to 300 kPa sensing range, and up to 20 000 sensing cycles from obvious contact area variation between microdome microstructures and the contact electrode under external compression. Furthermore, the bioinspired electronics present advanced thermal management by timely efficient thermal dissipation out from the contacted skin surface to meet human skin thermal comfort with the incorporated thermal conductive boron nitride nanosheets. Thus, it is vitally promising in wearable artificial electronic skins, intelligent human-interactive sensing, and personal health management.

Flexible Conformally Bioadhesive MXene Hydrogel Electronics for Machine Learning-Facilitated Human-Interactive Sensing

Wearable epidermic electronics assembled from conductive hydrogels are attracting various research attention for their seamless integration with human body for conformally real-time health monitoring, clinical diagnostics and medical treatment, and human-interactive sensing. Nevertheless, it remains a tremendous challenge to simultaneously achieve conformally bioadhesive epidermic electronics with remarkable self-adhesiveness, reliable ultraviolet (UV) protection ability, and admirable sensing performance for high-fidelity epidermal electrophysiological signals monitoring, along with timely photothermal therapeutic performances after medical diagnostic sensing, as well as efficient antibacterial activity and reliable hemostatic effect for potential medical therapy. Herein, a conformally bioadhesive hydrogel-based epidermic sensor, featuring superior self-adhesiveness and excellent UV-protection performance, is developed by dexterously assembling conducting MXene nanosheets network with biological hydrogel polymer network for conformally stably attaching onto human skin for high-quality recording of various epidermal electrophysiological signals with high signal-to-noise ratios (SNR) and low interfacial impedance for intelligent medical diagnosis and smart human-machine interface. Moreover, a smart sign language gesture recognition platform based on collected electromyogram (EMG) signals is designed for hassle-free communication with hearing-impaired people with the help of advanced machine learning algorithms. Meanwhile, the bioadhesive MXene hydrogel possesses reliable antibacterial capability, excellent biocompatibility, and effective hemostasis properties for promising bacterial-infected wound bleeding.

MXenes with ordered triatomic-layer borate polyanion terminations

Surface terminations profoundly influence the intrinsic properties of MXenes, but existing terminations are limited to monoatomic layers or simple groups, showing disordered arrangements and inferior stability. Here we present the synthesis of MXenes with triatomic-layer borate polyanion terminations (OBO terminations) through a flux-assisted eutectic molten etching approach. During the synthesis, Lewis acidic salts act as the etching agent to obtain the MXene backbone, while borax generates BO2- species, which cap the MXene surface with an O-B-O configuration. In contrast to conventional chlorine/oxygen-terminated Nb2C with localized charge transport, OBO-terminated Nb2C features band transport described by the Drude model, exhibiting a 15-fold increase in electrical conductivity and a 10-fold improvement in charge mobility at the d.c. limit. This transition is attributed to surface ordering that effectively mitigates charge carrier backscattering and trapping. Additionally, OBO terminations provide Ti3C2 MXene with substantially enriched Li+-hosting sites and thereby a large charge-storage capacity of 420 mAh g-1. Our findings illustrate the potential of intricate termination configurations in MXenes and their applications for (opto)electronics and energy storage.

Universal Intercalation/Alloying Hybrid Mechanism with -ICOHP Criterion in MAX Toward Steadily Ascending Lithium-Ion Batteries

Profiting from the unique atomic laminated structure, metallic conductivity, and superior mechanical properties, transition metal carbides and nitrides named MAX phases have shown great potential as anodes in lithium-ion batteries. However, the complexity of MAX configurations poses a challenge. To accelerate such application, a minus integrated crystal orbital Hamilton populations descriptor is innovatively proposed to rapidly evaluate the lithium storage potential of various MAX, along with density functional theory computations. It confirms that surface A-element atoms bound to lithium ions have odds of escaping from MAX. Interestingly, the activated A-element atoms enhance the reversible uptake of lithium ions by MAX anodes through an efficient alloying reaction. As an experimental verification, the charge compensation and SnxLiy phase evolution of designed Zr2SnC MAX with optimized structure is visualized via in situ synchrotron radiation XRD and XAFS technique, which further clarifies the theoretically expected intercalation/alloying hybrid storage mechanism. Notably, Zr2SnC electrodes achieve remarkably 219.8% negative capacity attenuation over 3200 cycles at 1 A g-1. In principle, this work provides a reference for the design and development of advanced MAX electrodes, which is essential to explore diversified applications of the MAX family in specific energy fields.

Nanoarchitectonics in Advanced Membranes for Enhanced Osmotic Energy Harvesting

Osmotic energy, often referred to as "blue energy", is the energy generated from the mixing of solutions with different salt concentrations, offering a vast, renewable, and environmentally friendly energy resource. The efficacy of osmotic power production considerably relies on the performance of the transmembrane process, which depends on ionic conductivity and the capability to differentiate between positive and negative ions. Recent advancements have led to the development of membrane materials featuring precisely tailored ion transport nanochannels, enabling high-efficiency osmotic energy harvesting. In this review, ion diffusion in confined nanochannels and the rational design and optimization of membrane architecture are explored. Furthermore, structural optimization of the membrane to mitigate transport resistance and the concentration polarization effect for enhancing osmotic energy harvesting is highlighted. Finally, an outlook on the challenges that lie ahead is provided, and the potential applications of osmotic energy conversion are outlined. This review offers a comprehensive viewpoint on the evolving prospects of osmotic energy conversion.

A mechanically robust spiral fiber with ionic-electronic coupling for multimodal energy harvesting

Wearable electronics are some of the most promising technologies with the potential to transform many aspects of human life such as smart healthcare and intelligent communication. The design of self-powered fabrics with the ability to efficiently harvest energy from the ambient environment would not only be beneficial for their integration with textiles, but would also reduce the environmental impact of wearable technologies by eliminating their need for disposable batteries. Herein, inspired by classical Archimedean spirals, we report a metastructured fiber fabricated by scrolling followed by cold drawing of a bilayer thin film of an MXene and a solid polymer electrolyte. The obtained composite fibers with a typical spiral metastructure (SMFs) exhibit high efficiency for dispersing external stress, resulting in simultaneously high specific mechanical strength and toughness. Furthermore, the alternating layers of the MXene and polymer electrolyte form a unique, tandem ionic-electronic coupling device, enabling SMFs to generate electricity from diverse environmental parameters, such as mechanical vibrations, moisture gradients, and temperature differences. This work presents a design rule for assembling planar architectures into robust fibrous metastructures, and introduces the concept of ionic-electronic coupling fibers for efficient multimodal energy harvesting, which have great potential in the field of self-powered wearable electronics.

Alkali cation stabilization of defects in 2D MXenes at ambient and elevated temperatures

Transition metal carbides have been adopted in energy storage, conversion, and extreme environment applications. Advancements in their 2D counterparts, known as MXenes, enable the design of unique structures at the ~1 nm thickness scale. Alkali cations have been essential in MXenes manufacturing processing, storage, and applications, however, exact interactions of these cations with MXenes are not fully understood. In this study, using Ti3C2Tx, Mo2TiC2Tx, and Mo2Ti2C3Tx MXenes, we present how transition metal vacancy sites are occupied by alkali cations, and their effect on MXene structure stabilization to control MXene's phase transition. We examine this behavior using in situ high-temperature x-ray diffraction and scanning transmission electron microscopy, ex situ techniques such as atomic-layer resolution secondary ion mass spectrometry, and density functional theory simulations. In MXenes, this represents an advance in fundamentals of cation interactions on their 2D basal planes for MXenes stabilization and applications. Broadly, this study demonstrates a potential new tool for ideal phase-property relationships of ceramics at the atomic scale.

MXene Composite Electromagnetic Shielding Materials: The Latest Research Status

MXene emerges as a premier candidate for electromagnetic shielding owing to its unique properties as a novel two-dimensional material. Its exceptional electrical conductivity, chemical reactivity, surface tunability, and facile processing render it highly suitable for diverse electromagnetic shielding applications. The research status of MXene and MXene-based electromagnetic shielding materials is systematically discussed in this paper. First, the research status of MXene as a single-component electromagnetic shielding material is briefly introduced. Subsequently, the research status of composite structures constructed by MXene with polymers, carbon derivatives, and ferrites is introduced in detail. Furthermore, the research progress of MXene-based ternary and quaternary composite electromagnetic shielding materials is further focused. Finally, the application of MXene-based composite electromagnetic shielding materials is prospected. A deeper understanding of MXene's electromagnetic shielding properties is facilitated by this paper, providing the direction for the future development of two-dimensional materials in the design and processing of electromagnetic shielding materials.

Unlocking the Potential of MXene in Catalysis: Decorated Mo2CTx Catalyst for Ammonia Synthesis under Mild Conditions

Ammonia, which is one of the most important chemicals for the synthesis of dyes, pharmaceuticals, and fertilizers, is produced by the reaction of molecular hydrogen with nitrogen, over an iron-based catalyst at 400-500 °C under pressure of over 100 bar. Decreasing the operating temperature and pressure of this highly energy-intensive process, developed by Haber and Bosch over 100 years ago, would decrease energy consumption in the world. In this work, we used two-dimensional Mo2CTx MXene as a support for a cobalt-based catalyst. The MXene functionalized by Co showed catalytic activity for ammonia synthesis from H2 and N2 at temperatures as low as 250 °C, without any pretreatment. The developed catalyst was highly active for ammonia synthesis, demonstrating a high rate of up to 9500 μmol g-1active phase h-1 at 400 °C under ambient pressure in steady-state conditions, and did not suffer from any deactivation after 15 days of reaction. The apparent activation energy (Ea) was found to be in the range of 68-74 kJ mol-1, which is in line with values reported for highly active catalysts. This improved catalyst may decrease the energy consumption in the synthesis of ammonia and its derivatives, as well as facilitate the use of ammonia as a hydrogen carrier for renewable energy storage.

MXene Supported Surface Plasmon Polaritons for Optical Microfiber Ammonia Sensing

The properties of surface plasmons are notoriously dependent on the supporting materials system. However, new capabilities cannot be obtained until the technique of surface plasmon enabled by advanced two-dimensional materials is well understood. Herein, we present the experimental demonstration of surface plasmon polaritons (SPPs) supported by single-layered MXene flakes (Ti3C2Tx) coating on an optical microfiber and its application as an ammonia gas sensor. Enabled by its high controllability of chemical composition, unique atomistically thin layered structure, and metallic-level conductivity, MXene is capable of supporting not only plasmon resonances across a wide range of wavelengths but also a selective sensing mechanism through frequency modulation. Theoretical modeling and optics experiments reveal that, upon adsorbing ammonia molecules, the free electron motion at the interface between the SiO2 microfiber and the MXene coating is modulated (i.e., the modulation of the SPPs under applied light), thus inducing a variation in the evanescent field. Consequently, a wavelength shift is produced, effectively realizing a selective and highly sensitive ammonia sensor with a 100 ppm detection limit. The MXene supported SPPs open a promising path for the application of advanced optical techniques toward gas and chemical analysis.

Fabrication of innovative multifunctional dye using MXene nanosheets

The increasing demand for natural and safer alternatives to traditional hair dyes has led to the investigation of nanomaterials as potential candidates for hair coloring applications. MXene nanosheets have emerged as a promising alternative in this context due to their unique optical and electronic properties. In this study, we aimed to evaluate the potential of Ti3C2Tx (Tx = -O, -OH, -F, etc.) MXene nanosheets as a hair dye. MXene nanosheet-based dyes have been demonstrated to exhibit not only coloring capabilities but also additional properties such as antistatic properties, heat dissipation, and electromagnetic wave shielding. Additionally, surface modification of MXene using collagen reduces the surface roughness of hair and upregulates keratinocyte markers KRT5 and KRT14, demonstrating the potential for tuning its physicochemical and biological properties. This conceptual advancement highlights the potential of MXene nanosheets to go beyond simple cosmetic improvements and provide improved comfort and safety by preventing the presence of hazardous ingredients and solvents while providing versatility.

Strong and Tough MXene Bridging-induced Conductive Nacre

Nacre is a classic model, providing an inspiration for fabricating high-performance bulk nanocomposites with the two-dimensional platelets. However, the "brick" of nacre, aragonite platelet, is an ideal building block for making high-performance bulk nanocomposites. Herein, we demonstrated a strong and tough conductive nacre through reassembling aragonite platelets with bridged by MXene nanosheets and hydrogen bonding, not only providing high mechanical properties but also excellent electrical conductivity. The flexural strength and fracture toughness of the obtained conductive nacre reach ~282 MPa and ~6.3 MPa m1/2, which is 1.6 and 1.6 times higher than that of natural nacre, respectively. These properties are attributed to densification and high orientation degree of the conductive nacre, which is effectively induced by the combined interactions of hydrogen bonding and MXene nanosheets bridging. The crack propagations in conductive nacre are effectively inhibited through crack deflection with hydrogen bonding, and MXene nanosheets bridging between aragonite platelets. In addition, our conductive nacre also provides a self-monitoring function for structural damage and offers exceptional electromagnetic interference shielding performance. Our strategy of reassembling the aragonite platelets exfoliated from waste nacre into high-performance artificial nacre, provides an avenue for fabricating high-performance bulk nanocomposites through the sustainable reutilization of shell resources.

A Visible-Light-Driven Self-Powered Nodularin-R Biosensing Platform Controlled by an Integrated Portable Photoelectrochemical Detection Device

The presence of nodularin-R (NOD-R) in water has gained considerable attention because of its widespread distribution and high toxicity. In this study, an accurate and rapid visible-light-driven self-powered photoelectrochemical (PEC) biosensor was developed by integrating a portable paper-based electrode with a custom-built miniaturized PEC detection device. The newly designed system successfully achieved on-site detection of NOD-R in real water samples based on PEC technology. First, target recognition triggers the initiation of the hybridization chain reaction to generate double-stranded DNA. The thus-formed double-stranded DNA entrapped methylene blue (MB), and the dye molecules were irradiated with visible light for conversion to leuco-MB in the presence of ascorbic acid. The resulting leuco-MB species significantly amplified the PEC signal output of TiO2-MXene, enabling NOD-R detection. Under optimal conditions, the proposed PEC assay strategy demonstrated NOD-R detection within a concentration range from 20 fg mL-1 to 10 ng mL-1 with a detection limit of 19.6 fg mL-1. In addition, a custom-built miniaturized PEC detection device conveniently integrates the detection component with the light source, enabling the real-time collection of results via a wireless module. This innovative self-powered PEC platform provides significant advancements in smooth and intelligent detection compared to traditional PEC detection devices.

Self-Assembled MXene Supported on Carbonization-Free Wood for a Symmetrical All-Wood Eco-Supercapacitor

As an emerging two-dimensional (2D) material, MXene has garnered significant interest in advanced energy storage systems, yet the stackable structure, poor mechanical stability, and lack of moldability limit its large-scale applications. To address this challenge, herein, the self-assembly of MXene on carbonization-free wood was obtained to serve as high-performance electrodes for symmetrical all-wood eco-supercapacitors by a steam-driven self-assembly method. This method can be implemented in a low-temperature environment, significantly simplifying traditional high-temperature annealing processes and generating minimal impact on the environment, human health, and resource consumption. The environmentally friendly steam-driven self-assembly strategy can be further extended into various wood-based electrodes, regardless of the types and structures of wood. As a typical platform electrode, the optimized MXene@delignified balsa wood (MDBW) achieves high areal capacitance and specific capacitance values of 2.99 F cm-2 and 580.55 F g-1 at an extensive mass loading of 5.16 mg cm-2, respectively, with almost loss-free capacitance after 10,000 cycles at 50 mA cm-2. In addition, an all-solid-state symmetrical all-wood eco-supercapacitor was further assembled based on MDBW-20 as both positive and negative electrodes to achieve a high energy density of 19.22 μWh cm-2 at a power density of 0.58 mW cm-2. This work provides an effective strategy to optimize wood-based electrodes for the practical application of biomass eco-supercapacitors.

"Hard" Emulsion-Induced Interface Super-Assembly: A General Strategy for Two-Dimensional Hierarchically Porous Metal-Organic Framework Nanoarchitectures

Two-dimensional (2D) hierarchically porous metal-organic framework (MOF) nanoarchitectures with tailorable meso-/macropores hold great promise for enhancing mass transfer kinetics, augmenting accessible active sites, and thereby boosting performance in heterogeneous catalysis. However, achieving the general synthesis of 2D free-standing MOF nanosheets with controllable hierarchical porosity and thickness remains a challenging task. Herein, we present an ingenious "hard" emulsion-induced interface super-assembly strategy for preparing 2D hierarchically porous UiO-66-NH2 nanosheets with highly accessible pore channels, tunable meso-/macropore sizes, and adjustable thicknesses. The methodology relies on transforming the geometric shape of oil droplet templates within appropriate oil-in-water emulsions from conventional zero-dimensional (0D) "soft" liquid spheres to 2D "hard" solid sheets below the oil's melting/freezing point. Subsequent surfactant exchange on the surface of 2D "hard" emulsions facilitates the heterogeneous nucleation and interfacial super-assembly of in situ formed mesostructured MOF nanocomposites, serving as structural units, in a loosely packed manner to produce 2D MOF nanosheets with multimodal micro/meso-/macroporous systems. Importantly, this strategy can be extended to prepare other 2D hierarchically porous MOF nanosheets by altering metal-oxo clusters and organic ligands. Benefiting from fast mass transfer and highly accessible Lewis acidic sites, the resultant 2D hierarchically porous UiO-66-NH2 nanosheets deliver a fabulous catalytic yield of approximately 96% on the CO2 cycloaddition of glycidyl-2-methylphenyl ether, far exceeding the yield of approximately 29% achieved using conventional UiO-66-NH2 microporous crystals. This "hard" emulsion-induced interface super-assembly strategy paves a new path toward the rational construction of elaborate 2D nanoarchitecture of hierarchical MOFs with tailored physicochemical properties for diverse potential applications.

Strain-free MoS2/ZrGe2N4 van der Waals Heterostructure: Tunable Electronic Properties with Type-II Band Alignment

Vertically stacked van der Waals heterostructures (vdW-HS) amplify the scope of 2D materials for emerging technological applications, such as nanodevices and solar cells. Here, we present a first-principles study on the formation energy and electronic properties of the heterobilayer (HBL) MoS2/ZrGe2N4, which forms a strain-free vdW-HS thanks to the identical lattice parameters of its constituents. This system has an indirect band gap with type-II band alignment, with the highest occupied and lowest unoccupied states localized on MoS2 and ZrGe2N4, respectively. Biaxial strain, which generally reduces the band gap regardless of compression or expansion, is applied to tune the electronic properties of the HBL. A small amount of tensile strain (>1%) leads to an indirect-to-direct transition, thereby shifting the band edges at the center of the Brillouin zone and leading to optical absorption in the visible region. These results suggest the potential application of HBL MoS2/ZrGe2N4 in optoelectronic devices.

Unlocking Ultrahigh Initial Coulombic Efficiency of MXene Anode via Presodiation and Electrolyte Optimization

The low initial Coulombic efficiency (ICE) greatly hinders the practical application of MXenes in sodium-ion batteries. Herein, theoretical calculations confirm that -F and -OH terminations as well as the tetramethylammonium ion (TMA+) intercalator in sediment Ti3C2Tx (s-Ti3C2Tx) MXene possess strong interaction with Na+, which impedes Na+ desorption during the charging process and results in low ICE. Consequently, Na+-intercalated sediment Ti3C2Tx (Na-s-Ti3C2Tx) is constructed through Na2S·9H2O treatment of s-Ti3C2Tx. Specifically, Na+ can first exchange with TMA+ of s-Ti3C2Tx and then combine with -F and -OH terminations, thus leading to the elimination of TMA+ and preshielding of -F and -OH. As expected, the resulting Na-s-Ti3C2Tx anode delivers considerably boosted ICE values of around 71% in carbonate-based electrolytes relative to s-Ti3C2Tx. Furthermore, electrolyte optimization is employed to improve ICE, and the results demonstrate that an ultrahigh ICE value of 94.0% is obtained for Na-s-Ti3C2Tx in the NaPF6-diglyme electrolyte. More importantly, Na-s-Ti3C2Tx exhibits a lower Na+ migration barrier and higher electronic conductivity compared with s-Ti3C2Tx based on theoretical calculations. In addition, the cyclic stability and rate performance of the Na-s-Ti3C2Tx anode in various electrolytes are comprehensively explored. The presented simple strategy in boosting ICE significantly enhances the commercialization prospect of MXenes in advanced batteries.

Stabilizing Ti3C2Tx MXene flakes in air by removing confined water

MXenes have demonstrated potential for various applications owing to their tunable surface chemistry and metallic conductivity. However, high temperatures can accelerate MXene film oxidation in air. Understanding the mechanisms of MXene oxidation at elevated temperatures, which is still limited, is critical in improving their thermal stability for high-temperature applications. Here, we demonstrate that Ti[Formula: see text]C[Formula: see text]T[Formula: see text] MXene monoflakes have exceptional thermal stability at temperatures up to 600[Formula: see text]C in air, while multiflakes readily oxidize in air at 300[Formula: see text]C. Density functional theory calculations indicate that confined water between Ti[Formula: see text]C[Formula: see text]T[Formula: see text] flakes has higher removal energy than surface water and can thus persist to higher temperatures, leading to oxidation. We demonstrate that the amount of confined water correlates with the degree of oxidation in stacked flakes. Confined water can be fully removed by vacuum annealing Ti[Formula: see text]C[Formula: see text]T[Formula: see text] films at 600[Formula: see text]C, resulting in substantial stability improvement in multiflake films (can withstand 600[Formula: see text]C in air). These findings provide fundamental insights into the kinetics of confined water and its role in Ti[Formula: see text]C[Formula: see text]T[Formula: see text] oxidation. This work enables the use of stable monoflake MXenes in high-temperature applications and provides guidelines for proper vacuum annealing of multiflake films to enhance their stability.

Ultrastrong MXene film induced by sequential bridging with liquid metal

Assembling titanium carbide (Ti3C2Tx) MXene nanosheets into macroscopic films presents challenges, including voids, low orientation degree, and weak interfacial interactions, which reduce mechanical performance. We demonstrate an ultrastrong macroscopic MXene film using liquid metal (LM) and bacterial cellulose (BC) to sequentially bridge MXene nanosheets (an LBM film), achieving a tensile strength of 908.4 megapascals. A layer-by-layer approach using repeated cycles of blade coating improves the orientation degree to 0.935 in the LBM film, while a LM with good deformability reduces voids into porosity of 5.4%. The interfacial interactions are enhanced by the hydrogen bonding from BC and the coordination bonding with LM, which improves the stress-transfer efficiency. Sequential bridging provides an avenue for assembling other two-dimensional nanosheets into high-performance materials.

Porous hybrid encapsulation enables high-rate lithium storage for a micron-sized SiO anode

Establishing a durable interfacial layer between an electrode and electrolyte to enable micron-sized silicon-based lithium-ion battery (LIB) anodes to achieve superior electrochemical performance is highly desired. Recent studies have shown that heterogeneous encapsulation with enhanced ion/electron transport is an effective strategy. However, the structural design of the existing hetero-coated interface lacks a reasonable ion/electron transport channel, resulting in high interfacial impedance. Herein, we designed a heterogenous MXene-mesoporous polypyrrole (mPPy) encapsulation layer onto micron-sized SiO particles. The MXene coating layer functions as a bridging interface that can build a strong chemical link to internal SiO via covalent bonding, thus reinforcing interfacial charge transfer rate. Meanwhile, it forms a dynamic connection with the outer mPPy through hydrogen bonding, which contributes to high interfacial Li+ concentration and ion/electron coupling transport rate. Accordingly, the as-prepared SiO@MXene@mPPy anode delivers a boosted specific capacity of 673.9 mA h g-1 at 2 A g-1 after 1000 cycles and high-rate capability of 777.4 mA h g-1 at 5 A g-1. Further, electrochemical kinetic analysis indicates that the MXene@mPPy coating layer shows a pseudocapacitance controlled Li storage mechanism, thereby displaying improved high-rate capability. This porous hybrid encapsulation strategy offers new possibilities for a micron-sized SiO anode to achieve an excellent performance.

Recent Developments and Challenges in Solid-Contact Ion-Selective Electrodes

Solid-contact ion-selective electrodes (SC-ISEs) have the advantages of easy miniaturization, even chip integration, easy carrying, strong stability, and more favorable detection in complex environments. They have been widely used in conjunction with portable, wearable, and intelligent detection devices, as well as in on-site analysis and timely monitoring in the fields of environment, industry, and medicine. This article provides a comprehensive review of the composition of sensors based on redox capacitive and double-layer capacitive SC-ISEs, as well as the ion-electron transduction mechanisms in the solid-contact (SC) layer, particularly focusing on strategies proposed in the past three years (since 2021) for optimizing the performance of SC-ISEs. These strategies include the construction of ion-selective membranes, SC layer, and conductive substrates. Finally, the future research direction and possibilities in this field are discussed and prospected.

Dual-Responsive MXene-Functionalized Wool Yarn Artificial Muscles

Fiber-based artificial muscles are promising for smart textiles capable of sensing, interacting, and adapting to environmental stimuli. However, the application of current artificial muscle-based textiles in wearable and engineering fields has largely remained a constraint due to the limited deformation, restrictive stimulation, and uncomfortable. Here, dual-responsive yarn muscles with high contractile actuation force are fabricated by incorporating a very small fraction (<1 wt.%) of Ti3C2Tx MXene/cellulose nanofibers (CNF) composites into self-plied and twisted wool yarns. They can lift and lower a load exceeding 3400 times their own weight when stimulated by moisture and photothermal. Furthermore, the yarn muscles are coiled homochirally or heterochirally to produce spring-like muscles, which generated over 550% elongation or 83% contraction under the photothermal stimulation. The actuation mechanism, involving photothermal/moisture-mechanical energy conversion, is clarified by a combination of experiments and finite element simulations. Specifically, MXene/CNF composites serve as both photothermal and hygroscopic agents to accelerate water evaporation under near-infrared (NIR) light and moisture absorption from ambient air. Due to their low-cost facile fabrication, large scalable dimensions, and robust strength coupled with dual responsiveness, these soft actuators are attractive for intelligent textiles and devices such as self-adaptive textiles, soft robotics, and wearable information encryption.

MXene-Stabilized VS2 Nanostructures for High-Performance Aqueous Zinc Ion Storage

Aqueous zinc-ion batteries (AZIBs) based on vanadium oxides or sulfides are promising candidates for large-scale rechargeable energy storage due to their ease of fabrication, low cost, and high safety. However, the commercial application of vanadium-based electrode materials has been hindered by challenging problems such as poor cyclability and low-rate performance. To this regard, sophisticated nanostructure engineering technology is used to adeptly incorporate VS2 nanosheets into the MXene interlayers to create a stable 2D heterogeneous layered structure. The MXene nanosheets exhibit stable interactions with VS2 nanosheets, while intercalation between nanosheets effectively increases the interlayer spacing, further enhancing their stability in AZIBs. Benefiting from the heterogeneous layered structure with high conductivity, excellent electron/ion transport, and abundant reactive sites, the free-standing VS2/Ti3C2Tz composite film can be used as both the cathode and the anode of AZIBs. Specifically, the VS2/Ti3C2Tz cathode presents a high specific capacity of 285 mAh g-1 at 0.2 A g-1. Furthermore, the flexible Zn-metal free in-plane VS2/Ti3C2Tz//MnO2/CNT AZIBs deliver high operation voltage (2.0 V) and impressive long-term cycling stability (with a capacity retention of 97% after 5000 cycles) which outperforms almost all reported Vanadium-based electrodes for AZIBs. The effective modulation of the material structure through nanocomposite engineering effectively enhances the stability of VS2, which shows great potential in Zn2+ storage. This work will hasten and stimulate further development of such composite material in the direction of energy storage.

Multifunctional SnO2 QDs/MXene Heterostructures as Laminar Interlayers for Improved Polysulfide Conversion and Lithium Plating Behavior

Poor cycling stability in lithium-sulfur (Li-S) batteries necessitates advanced electrode/electrolyte design and innovative interlayer architectures. Heterogeneous catalysis has emerged as a promising approach, leveraging the adsorption and catalytic performance on lithium polysulfides (LiPSs) to inhibit LiPSs shuttling and improve redox kinetics. In this study, we report an ultrathin and laminar SnO2@MXene heterostructure interlayer (SnO2@MX), where SnO2 quantum dots (QDs) are uniformly distributed across the MXene layer. The combined structure of SnO2 QDs and MXene, along with the creation of numerous active boundary sites with coordination electron environments, plays a critical role in manipulating the catalytic kinetics of sulfur species. The Li-S cell with the SnO2@MX-modified separator not only demonstrates superior electrochemical performance compared to cells with a bare separator but also induces homogeneous Li deposition during cycling. As a result, an areal capacity of 7.6 mAh cm-2 under a sulfur loading of 7.5 mg cm-2 and a high stability over 500 cycles are achieved. Our work demonstrates a feasible strategy of utilizing a laminar separator interlayer for advanced Li-S batteries awaiting commercialization and may shed light on the understanding of heterostructure catalysis with enhanced reaction kinetics.

Advancements in MXene Composite Materials for Wearable Sensors: A Review

In recent years, advancements in the Internet of Things (IoT), manufacturing processes, and material synthesis technologies have positioned flexible sensors as critical components in wearable devices. These developments are propelling wearable technologies based on flexible sensors towards higher intelligence, convenience, superior performance, and biocompatibility. Recently, two-dimensional nanomaterials known as MXenes have garnered extensive attention due to their excellent mechanical properties, outstanding electrical conductivity, large specific surface area, and abundant surface functional groups. These notable attributes confer significant potential on MXenes for applications in strain sensing, pressure measurement, gas detection, etc. Furthermore, polymer substrates such as polydimethylsiloxane (PDMS), polyurethane (PU), and thermoplastic polyurethane (TPU) are extensively utilized as support materials for MXene and its composites due to their light weight, flexibility, and ease of processing, thereby enhancing the overall performance and wearability of the sensors. This paper reviews the latest advancements in MXene and its composites within the domains of strain sensors, pressure sensors, and gas sensors. We present numerous recent case studies of MXene composite material-based wearable sensors and discuss the optimization of materials and structures for MXene composite material-based wearable sensors, offering strategies and methods to enhance the development of MXene composite material-based wearable sensors. Finally, we summarize the current progress of MXene wearable sensors and project future trends and analyses.

Covalent Bonding of MXene/COF Heterojunction for Ultralong Cycling Li-Ion Battery Electrodes

Covalent organic frameworks (COFs) have emerged as promising renewable electrode materials for LIBs and gained significant attention, but their capacity has been limited by the densely packed 2D layer structures, low active site availability, and poor electronic conductivity. Combining COFs with high-conductivity MXenes is an effective strategy to enhance their electrochemical performance. Nevertheless, simply gluing them without conformal growth and covalent linkage restricts the number of redox-active sites and the structural stability of the composite. Therefore, in this study, a covalently assembled 3D COF on Ti3C2 MXenes (Ti3C2@COF) is synthesized and serves as an ultralong cycling electrode material for LIBs. Due to the covalent bonding between the COF and Ti3C2, the Ti3C2@COF composite exhibits excellent stability, good conductivity, and a unique 3D cavity structure that enables stable Li+ storage and rapid ion transport. As a result, the Ti3C2-supported 3D COF nanosheets deliver a high specific capacity of 490 mAh g-1 at 0.1 A g-1, along with an ultralong cyclability of 10,000 cycles at 1 A g-1. This work may inspire a wide range of 3D COF designs for high-performance electrode materials.

Beyond graphene: exploring the potential of MXene anodes for enhanced lithium-sulfur battery performance

The high theoretical energy density of Li-S batteries makes them a viable option for energy storage systems in the near future. Considering the challenges associated with sulfur's dielectric properties and the synthesis of soluble polysulfides during Li-S battery cycling, the exceptional ability of MXene materials to overcome these challenges has led to a recent surge in the usage of these materials as anodes in Li-S batteries. The methods for enhancing anode performance in Li-S batteries via the use of MXene interfaces are thoroughly investigated in this study. This study covers a wide range of techniques such as surface functionalization, heteroatom doping, and composite structure design for enhancing MXene interfaces. Examining challenges and potential downsides of MXene-based anodes offers a thorough overview of the current state of the field. This review encompasses recent findings and provides a thorough analysis of advantages and disadvantages of adding MXene interfaces to improve anode performance to assist researchers and practitioners working in this field. This review contributes significantly to ongoing efforts for the development of reliable and effective energy storage solutions for the future.

Ultrastable Organic Anode Enabled by Electrochemically Active MXene Binder toward Advanced Potassium Ion Storage

Conjugated carbonyl compounds are regarded as promising organic anode materials for potassium ion batteries (PIBs) due to their rich redox sites, excellent reversibility, and structural tunability, but their low electrical conductivity and severe solubility in organic electrolytes have substantially restricted their practical application. Herein, 2D MXene is utilized as an electrochemically active binder to fabricate perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) electrodes for high-performance PIBs. MXene, coupled with Super-P particles, served as a binder and conductive matrix to facilitate rapid ion and electron transport, restrain the solubility of PTCDA, promote potassium adsorption, and alleviate the volume expansion of PTCDA during potassiation. Consequently, the PTCDA electrode bonded by the MXene/Super-P system delivers excellent potassium storage performance in terms of a high capacity of 462 mAh g-1 at 50 mA g-1, superior rate capability of 116.3 mAh g-1 at 2000 mA g-1, and stable cycle performance over 3000 cycles with a low capacity decay rate of ∼0.0033% per cycle. When configured with the PTCDA@450 cathode, an all-PTCDA potassium ion full cell delivers a maximum energy density of 179.5 Wh kg-1, indicating the superiority of MXene as an electrochemically active binder to promote the practical application of organic anodes for PIBs.

Multifunctional MXene/Carbon Nanotube Janus Film for Electromagnetic Shielding and Infrared Shielding/Detection in Harsh Environments

Multifunctional, flexible, and robust thin films capable of operating in demanding harsh temperature environments are crucial for various cutting-edge applications. This study presents a multifunctional Janus film integrating highly-crystalline Ti3C2Tx MXene and mechanically-robust carbon nanotube (CNT) film through strong hydrogen bonding. The hybrid film not only exhibits high electrical conductivity (4250 S cm-1), but also demonstrates robust mechanical strength and durability in both extremely low and high temperature environments, showing exceptional resistance to thermal shock. This hybrid Janus film of 15 μm thickness reveals remarkable multifunctionality, including efficient electromagnetic shielding effectiveness of 72 dB in X band frequency range, excellent infrared (IR) shielding capability with an average emissivity of 0.09 (a minimal value of 0.02), superior thermal camouflage performance over a wide temperature range (- 1 to 300 °C) achieving a notable reduction in the radiated temperature by 243 °C against a background temperature of 300 °C, and outstanding IR detection capability characterized by a 44% increase in resistance when exposed to 250 W IR radiation. This multifunctional MXene/CNT Janus film offers a feasible solution for electromagnetic shielding and IR shielding/detection under challenging conditions.

M4X3 MXenes: Application in Energy Storage Devices

MXene has garnered widespread recognition in the scientific community due to its remarkable properties, including excellent thermal stability, high conductivity, good hydrophilicity and dispersibility, easy processability, tunable surface properties, and admirable flexibility. MXenes have been categorized into different families based on the number of M and X layers in Mn+1Xn, such as M2X, M3X2, M4X3, and, recently, M5X4. Among these families, M2X and M3X2, particularly Ti3C2, have been greatly explored while limited studies have been given to M5X4 MXene synthesis. Meanwhile, studies on the M4X3 MXene family have developed recently, hence, demanding a compilation of evaluated studies. Herein, this review provides a systematic overview of the latest advancements in M4X3 MXenes, focusing on their properties and applications in energy storage devices. The objective of this review is to provide guidance to researchers on fostering M4X3 MXene-based nanomaterials, not only for energy storage devices but also for broader applications.

Manganese Oxides with Different Morphologies In Situ Anchored onto Ti3C2Tx Nanosheets: Highly Effective Decontamination toward Sulfur Mustard Simulants

Manganese oxides with porous structure and abundant active sites show potential in degrading sulfur mustard (HD). However, there is an interface effect between the oily liquid HD and nano oxides, and the powder is prone to agglomeration, which leads to incomplete contact and limited degradation ability. Here, we demonstrate a simple hydrothermal method for preparing MnO2/Ti3C2 composites to address this problem. The influence of morphology and crystal structure on performance are examined. Herein, flower-like MnO2 is loaded onto the surface or interlayer of Ti3C2-MXene nanosheets during in situ formation, significantly expanding the specific surface area. It also provides abundant acid-base sites and oxygen vacancies for the degradation of simulants 2-chloro-ethyl-ethyl thioether (2-CEES) without external energy, resulting in a reaction half-life as fast as 12.5 min. The relationship between structure and performance is clearly elaborated through temperature-programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS), and X-ray absorption fine structure (XAFS) analyses. Based on in situ attenuated total reflection-Fourier transform infrared (ATR-FTIR) analysis, gas chromatography-mass spectrometry (GC-MS) analysis, and density functional theory (DFT) calculation, the proposed degradation pathway of the 2-CEES molecule is a synergistic effect of hydrolysis, elimination, and oxidation. Furthermore, the products are nontoxic or low toxic. Metal oxide/MXene composites are first illustrated for their potential use in degrading sulfur mustard, suggesting new insights into these materials as novel decontamination for decomposing chemical warfare agents.

Ultrasensitive electrochemical sensor based on synergistic effect of Ag@MXene and antifouling cyclic multifunctional peptide for PD-L1 detection in serum

A sensing interface co-constructed from the two-dimensional conductive material (Ag@MXene) and an antifouling cyclic multifunctional peptide (CP) is described. While the large surface area of Ag@MXene loads more CP probes, CP binds to Ag@MXene to form a fouling barrier and ensure the structural rigidity of the targeting sequence. This strategy synergistically enhances the biosensor's sensitivity and resistance to contamination. The SPR results showed that the binding affinity of the CP to the target was 6.23 times higher than that of the antifouling straight-chain multifunctional peptide (SP) to the target. In the 10 mg/mL BSA electrochemical fouling test, the fouling resistance of Ag@MXene + CP (composite sensing interface of CP combined with Ag@MXene) was 30 times higher than that of the bare electrode. The designed electrochemical sensor exhibited good selectivity and wide dynamic response range at PD-L1 concentrations from 0.1 to 50 ng/mL. The lowest detection limit was 24.54 pg/mL (S/N = 3). Antifouling 2D materials with a substantial specific surface area, coupled with non-straight chain antifouling multifunctional peptides, offer a wide scope for investigating the sensitivity and antifouling properties of electrochemical sensors.

Additive-Free Anode with High Stability: Nb2CTx MXene Prepared by HCl-LiF Hydrothermal Etching for Lithium-Ion Batteries

MXenes, represented by Ti3C2Tx, have been widely studied in the electrochemical energy storage fields, including lithium-ion batteries, for their unique two-dimensional structure, tunable surface chemistry, and excellent electrical conductivity. Recently, Nb2CTx, as a new type of MXene, has attracted more and more attention due to its high theoretical specific capacity of 542 mAh g-1. However, the preparation of few-layer Nb2CTx nanosheets with high-quality remains a challenge, which limits their research and application. In this work, high-quality few-layer Nb2CTx nanosheets with a large lateral size and a high conductivity of up to 500 S cm-1 were prepared by a simple HCl-LiF hydrothermal etching method, which is 2 orders of magnitude higher than that of previously reported Nb2CTx. Furthermore, from its aqueous ink, the viscosity-tunable organic few-layer Nb2CTx ink was prepared by HCl-induced flocculation and N-methyl-2-pyrrolidone treatment. When using the organic few-layer Nb2CTx ink as an additive-free anode of lithium-ion batteries, it showed excellent cycling performance with a reversible specific capacity of 524.0 mAh g-1 after 500 cycles at 0.5 A g-1 and 444.0 mAh g-1 after 5000 cycles at 1 A g-1. For rate performance, a specific capacity of 159.8 mAh g-1 was obtained at a high current density of 5 A g-1, and an excellent capacity retention rate of about 95.65% was achieved when the current density returned to 0.5 A g-1. This work presents a simple and scalable process for the preparation of high-quality Nb2CTx and its aqueous/organic ink, which demonstrates important application potential as electrodes for electrochemical energy storage devices.