Dispersibility and Photochemical Stability of Delaminated MXene Flakes in Water

Detection of d-Amino Acids in Saliva for Gastric Cancer Diagnosis Using Pt/MXene Plasmonic Nanozymes

Developing noninvasive strategies for gastric cancer diagnosis is urgent since the current clinical methods usually cause discomfort and risk of infection to patients. Herein, we develop a noninvasive and highly sensitive method for detecting d-amino acids (DAAs) in saliva as a potential biomarker for early gastric cancer diagnosis. By using a novel Pt/Ti3C2Tx nanozyme probe, we demonstrate enhanced peroxidase-like activity and photothermal performance under near-infrared (NIR) light irradiation. This probe effectively catalyzes the conversion of H2O2, produced by the reaction of DAA and DAA oxidase, into reactive oxygen species, significantly accelerating the catalytic oxidation of 3,3',5,5'-tetramethylbenzidine to its oxidized state. The depth of the resulting blue color is directly proportional to the DAA concentration in the saliva. Our method not only ensures high sensitivity and specificity for DAA detection but also establishes a dual-mode detection platform that enhances both colorimetric and thermal signals under NIR light irradiation. This platform has been successfully applied in the analysis of 45 clinical saliva samples, confirming its feasibility and diagnostic accuracy for early gastric cancer screening. This study offers a rapid and noninvasive diagnostic approach for clinical patients with gastric cancer, providing a promising alternative to current invasive methods.

Biological and environmental degradation of two-dimensional materials

As the use of two-dimensional materials continues to grow, so too does the need to understand the environmental and biological impact of such materials. Degradation is a critical step in the life cycle of any material, but the majority of such knowledge is obtained from test tube and in vitro studies. Therefore, there remains a gap in understanding the degradability of two-dimensional materials in complex systems (in vivo) and in different ambient environments. In this Review, we highlight the need for more data-driven studies on the degradation of two-dimensional materials, including their kinetics, by-products, stability and possible downstream effects. Although challenging, building an understanding of the degradation profiles of different advanced materials in various environments at the chemical and molecular level is essential.

Subtle 2D/2D MXene-Based Heterostructures for High-Performance Electrocatalytic Water Splitting

Developing efficient electrocatalysts is significant for the commercial application of electrocatalytic water splitting. 2D materials have presented great prospects in electrocatalysis for their high surface-to-volume ratio and tunable electronic properties. Particularly, MXene emerges as one of the most promising candidates for electrocatalysts, exhibiting unique advantages of hydrophilicity, outstanding conductivity, and exceptional stability. However, it suffers from lacking catalytic active sites, poor oxidation resistance, and easy stacking, leading to a significant suppression of the catalytic performance. Combining MXene with other 2D materials is an effective way to tackle the aforementioned drawbacks. In this review, the focus is on the accurate synthesis of 2D/2D MXene-based catalysts toward electrocatalytic water splitting. First, the mechanisms of electrocatalytic water splitting and the relative properties and preparation methods of MXenes are introduced to offer the basis for accurate synthesis of 2D/2D MXene-based catalysts. Then, the accurate synthesis methods for various categories of 2D/2D MXene-based catalysts, such as wet-chemical, phase-transformation, electrodeposition, etc., are systematically elaborated. Furthermore, in-depth investigations are conducted into the internal interactions and structure-performance relationship of 2D/2D MXene-based catalysts. Finally, the current challenges and future opportunities are proposed for the development of 2D/2D MXene-based catalysts, aiming to enlighten these promising nanomaterials for electrocatalytic water splitting.

Anisotropic conductive eutectogels for strain sensing and triboelectric nanogeneration in extreme environments

Conductive hydrogels have attracted widespread attention for their promising application prospects in portable and flexible electronic devices. However, hydrogels commonly suffer from problems such as solvent volatilization and freezing at low temperatures. Inspired by tissues such as human muscles, tendons, and ligaments, this study proposes a facile method to produce anisotropic conductive strong and tough eutectogels through directional freezing integrated with solvent substitution (DFSS) strategy. Eutectogels with anisotropic characteristics exhibit a highly anisotropic structure, conferring distinctive anisotropic mechanical properties and electrical conductivity. The prepared anisotropic PVA-M-DES eutectogels exhibit excellent mechanical properties (high strength of 6.31 MPa, high toughness of 20.75 MJ m-3, elastic modulus of 2.36 MPa, and fracture strain of 596%), high conductivity (0.17 S m-1), excellent anti-freezing and anti-drying properties. Environment-tolerant anisotropic PVA-M-DES eutectogels can be assembled into strain sensor and triboelectric nanogenerator to achieve real-time monitoring of various human motions and have potential applications in wearable electronics, personal healthcare, energy harvesting, and human-machine interfaces.

High-Performance Yet Sustainable Triboelectric Nanogenerator Based on Sulfur-Rich Polymer Composite with MXene Segregated Structure

State-of-the-art triboelectric nanogenerators (TENGs) typically employ fluoropolymers, highly negative chargeable materials in triboelectric series. However, many researchers nowadays are concerned about environmental pollution caused by poly-and per-fluoroalkyl substances (PFAS) due to their critical immunotoxicity as fluoropolymers are likely to release PFAS into the ecosystem during their life cycle. Herein, a sulfur-rich polymer (SRP)/MXene composite, offering high-performance yet sustainable TENG is developed. Value-addition of sulfur into SRP-based TENG has huge advantages since sulfur is abundant waste from petroleum refining and possesses the highest electron affinity (-200 kJ mol-1) among polymerizable atoms. MXene segregated structure is introduced into SRP to achieve homogeneous distribution without electrical percolation by utilizing below 0.5 wt% of MXene, resulting in a significantly enhanced dielectric constant without a drastic increase of dielectric loss. Due to homogeneous MXene distribution, SRP/MXene composite-based TENG demonstrates 2.9 times and 19.5 times enhances peak voltage and peak current compared to previous SRP-based TENGs. Additionally, it exhibits reusability without critical reduction of modulus and TENG performance due to dynamically exchangeable disulfide bonds. Finally, after the corona discharging and scaling-up process to a 4-inch wafer size, SRP/MXene composite-based TENG exhibits an 8.4 times improvement in peak power density, reaching 3.80 W m-2 compared to previous SRP-based TENGs.

MXenes for Zinc-Based Electrochemical Energy Storage Devices

As an economical and safer alternative to lithium, zinc (Zn) is promising for realizing new high-performance electrochemical energy storage devices, such as Zn-ion batteries, Zn-ion hybrid capacitors, and Zn-air batteries. Well-designed electrodes are needed to enable efficient Zn electrochemistry for energy storage. Two-dimensional transition metal carbides and nitrides (MXenes) are emerging materials with unique electrical, mechanical, and electrochemical properties and versatile surface chemistry. They are potential material candidates for constructing high-performance electrodes of Zn-based energy storage devices. This review first briefly introduces the working mechanisms of the three Zn-based energy storage devices. Then, the recent progress on the synthesis, chemical functionalization, and structural design of MXene-based electrodes is summarized. Their performance in Zn-based devices is analyzed to establish relations between material properties, electrode structures, and device performance. Last, several research topics are proposed to be addressed for developing practical MXene-based electrodes for Zn-based energy storage devices to enable their commercialization and broad adoption in the near future.

Comparative Effects of Hydrazine and Thermal Reduction Methods on Electromagnetic Interference Shielding Characteristics in Foamed Titanium Carbonitride MXene Films

The urgent need for the development of micro-thin shields against electromagnetic interference (EMI) has sparked interest in MXene materials owing to their metallic electrical conductivity and ease of film processing. Meanwhile, postprocessing treatments can potentially exert profound impacts on their shielding effectiveness (SE). This work comprehensively compares two reduction methods, hydrazine versus thermal, to fabricate foamed titanium carbonitride (Ti3CNTx) MXene films for efficient EMI shielding. Upon treatment of ≈ 100 µm-thick MXene films, gaseous transformations of oxygen-containing surface groups induce highly porous structures (up to ≈ 74.0% porosity). The controlled application of hydrazine and heat allows precise regulation of the reduction processes, enabling tailored control over the morphology, thickness, chemistry, and electrical properties of the MXene films. Accordingly, the EMI SE values are theoretically and experimentally determined. The treated MXene films exhibit significantly enhanced SE values compared to the pristine MXene film (≈ 52.2 dB), with ≈ 38% and ≈ 83% maximum improvements for the hydrazine and heat-treated samples, respectively. Particularly, heat treatment is more effective in terms of this enhancement such that an SE of 118.4 dB is achieved at 14.3 GHz, unprecedented for synthetic materials. Overall, the findings of this work hold significant practical implications for advancing high-performance, non-metallic EMI shielding materials.

MXene-supported MIL-88A(Fe) as persulfate activator for removal of tetracycline

The poor conductivity, poor stability, and agglomeration of iron-based metal organic framework MIL-88A(Fe) limit its application as persulfate (PS) activator in water purification. Herein, MXene-supported MIL-88A(Fe) composites (M88A/MX) were synthesized to enhance its adsorption and catalytic capability for tetracycline (TC) removal. Scanning electron microscope (SEM), X-ray diffractometer (XRD), Fourier transform infrared spectrometer (FT-IR), and X-ray photoelectron spectroscopy (XPS) were used to characterize prepared materials, confirming the successful attachment of MIL-88A(Fe) to the surface of MXene. M88A/MX-0.2 composites, prepared with 0.2 g MXene addition, exhibit optimal degradation efficiency, reaching 98% under conditions of 0.2 g/L M88A/MX-0.2, 1.0 mM PS, 20 ppm TC, and pH 5. The degradation rate constants of M88A/MX-0.2 were 0.03217 min-1, which was much higher than that of MIL-88A(Fe) (0.00159 min-1) and MXene (0.00626 min-1). The removal effects of reaction parameters, such as dosage of M88A/MX-0.2 and PS; initial solution pH; and the presence of the common co-existing constituents (humic acid and the inorganic anions) were investigated in detail. Additionally, the reuse of M88A/MX-0.2 showed that the composites had good cycling stability by recurrent experiments. The results of electron paramagnetic resonance (EPR) and quenching experiments indicated that ·OH, ·SO4-, and ·O2- were involved in the M88A/MX-0.2/PS system where persulfate oxidation process was activated with prepared M88A/MX-0.2. In addition, the intermediates of photocatalytic degradation were determined by HPLC-MS, and the possible degradation pathways of the target molecules were inferred. This study offered a new avenue for sulfate-based degradation of Fe-based metal organic framework.

Effect of surface functionalization on DNA sequencing using MXene-based nanopores

As one of the most promising types of label-free nanopores has great potential for DNA sequencing via fast detection of different DNA bases. As one of the most promising types of label-free nanopores, two-dimensional nanopore materials have been developed over the past two decades. However, how to detect different DNA bases efficiently and accurately is still a challenging problem. In the present work, the translocation of four homogeneous DNA strands (i.e., poly(A)20, poly(C)20, poly(G)20, and poly(T)20) through two-dimensional transition-metal carbide (MXene) membrane nanopores with different surface terminal groups is investigated via all-atom molecular dynamics simulations. Interestingly, it is found that the four types of bases can be distinguished by different ion currents and dwell times when they are transported through the Ti3C2(OH)2 nanopore. This is mainly attributed to the different orientation and position distributions of the bases, the hydrogen bonding inside the MXene nanopore, and the interaction of the ssDNA with the nanopore. The present study enhances the understanding of the interaction between DNA strands and MXene nanopores with different functional groups, which may provide useful guidelines for the design of MXene-based devices for DNA sequencing in the future.

Architecture of Vanadium-Based MXene Dysregulating Tumor Redox Homeostasis for Amplified Nanozyme Catalytic/Photothermal Therapy

Taking the significance of the special microenvironment for tumor cell survival into account, disrupting tumor redox homeostasis is highly prospective for improving therapeutic efficacy. Herein, a multifunctional 2D vanadium-based MXene nanoplatform, V4 C3 /atovaquone@bovine albumin (V4 C3 /ATO@BSA, abbreviated as VAB) has been elaborately constructed for ATO-enhanced nanozyme catalytic/photothermal therapy. The redox homeostasis within the tumor cells is eventually disrupted, showing a remarkable anti-tumor effect. The VAB nanoplatform with mixed vanadium valence states can induce a cascade of catalyzed reactions in the tumor microenvironment, generating plenty of reactive oxygen species (ROS) with effective glutathione consumption to amplify oxidative stress. Meanwhile, the stable and strong photothermal effect of VAB under near-infrared irradiation not only causes the necrosis of tumor cells, but also improves its peroxidase-like activity. In addition, the release of ATO can effectively alleviate endogenous oxygen consumption to limit triphosadenine formation and inhibit mitochondrial respiration. As a result, the expression of heat shock proteins is effectively suppressed to overcome thermoresistance and the production of ROS can be further promoted due to mitochondrial injury. Moreover, VAB also presents high photoacoustic and photothermal imaging performances. In brief, the multifunctional nanoplatform can provide ATO-enhanced nanozyme catalytic/photothermal therapy with broadening the biomedical applications of vanadium-based MXene.

3D Assembly of MXene Networks using a Ceramic Backbone with Controlled Porosity

Transition metal carbides (MXenes) are novel 2D nanomaterials with exceptional properties, promising significant impact in applications such as energy storage, catalysis, and energy conversion. A major barrier preventing the widespread use of MXenes is the lack of methods for assembling MXene in 3D space without significant restacking, which degrades their performance. Here, this challenge is successfully overcome by introducing a novel material system: a 3D network of MXene formed on a porous ceramic backbone. The backbone dictates the network's 3D architecture while providing mechanical strength, gas/liquid permeability, and other beneficial properties. Freeze casting is used to fabricate a silica backbone with open pores and controlled porosity. Next, capilary flow is used to infiltrate MXene into the backbone from a dispersion. The system is then dried to conformally coat the pore walls with MXene, creating an interconnected 3D-MXene network. The fabrication approach is reproducible, and the MXene-infiltrated porous silica (MX-PS) system is highly conductive (e.g., 340 S m-1 ). The electrical conductivity of MX-PS is controlled by the porosity distribution, MXene concentration, and the number of infiltration cycles. Sandwich-type supercapacitors with MX-PS electrodes are shown to produce excellent areal capacitance (7.24 F cm-2 ) and energy density (0.32 mWh cm-2 ) with only 6% added MXene mass. This approach of creating 3D architectures of 2D nanomaterials will significantly impact many engineering applications.

Biomacromolecular and Toxicity Responses of Bacteria upon the Nano-Bio Interfacial Interactions with Ti3C2Tx Nanosheets

The biomolecular responses of bacteria to 2D nanosheets that result from nano-bio interfacial interactions remain to be thoroughly examined. Herein, Fourier transform infrared (FTIR) multivariate and 2D correlation analyses were performed to assess the composition and conformational changes in bacterial biomacromolecules (lipids, polysaccharides, and carbohydrates) upon exposure to Ti3C2Tx nanosheets. General toxicity assays, 3D excitation-emission matrix fluorescence analyses, extended Derjaguin-Landau-Verwey-Overbeek theory interaction calculations, and isothermal titration calorimetry were also performed. Our results demonstrate that Ti3C2Tx nanosheets considerably impact Gram-positive bacteria (Bacillus subtilis), causing oxidative damage and inactivation by preferentially interacting with and disrupting the cell walls. The bilayer membrane structure of Gram-negative bacteria (Escherichia coli) endows them with increased resistance to Ti3C2Tx nanosheets. The unmodified nanosheets had a higher affinity to bacterial protein components with lower toxicity due to their susceptibility to oxidation. Surface modification with KOH or hydrazine (HMH), particularly HMH, induced stronger dispersion, antioxidation, and affinity to bacterial phospholipids, which resulted in severe cell membrane lipid peroxidation and bacterial inactivation. These findings provide valuable insight into nano-bio interfacial interactions, which can facilitate the development of antimicrobial and antifouling surfaces and contribute to the evaluation of the environmental risks of nanomaterials.

MXenes Antibacterial Properties and Applications: A Review and Perspective

The mutations of bacteria due to the excessive use of antibiotics, and generation of antibiotic-resistant bacteria have made the development of new antibacterial compounds a necessity. MXenes have emerged as biocompatible transition metal carbide structures with extensive biomedical applications. This is related to the MXenes' unique combination of properties, including multifarious elemental compositions, 2D-layered structure, large surface area, abundant surface terminations, and excellent photothermal and photoelectronic properties. The focus of this review is the antibacterial application of MXenes, which has attracted the attention of researchers since 2016. A quick overview of the synthesis strategies of MXenes is provided and then summarizes the effect of various factors (including structural properties, optical properties, surface charges, flake size, and dispersibility) on the biocidal activity of MXenes. The main mechanisms for deactivating bacteria by MXenes are discussed in detail including rupturing of the bacterial membrane by sharp edges of MXenes nanoflakes, generating the reactive oxygen species (ROS), and photothermal deactivating of bacteria. Hybridization of MXenes with other organic and inorganic materials can result in materials with improved biocidal activities for different applications such as wound dressings and water purification. Finally, the challenges and perspectives of MXene nanomaterials as biocidal agents are presented.

Role of extracellular polymeric substances in the aggregation and biological response of micro(nano)plastics with different functional groups and sizes

In this work, the effects of extracellular polymeric substances (EPS) on the aggregation and biological responses of different micro(nano)plastics (MNPs, <1000 µm) were investigated. EPS increased the colloidal stability of PS MPs in NaCl or CaCl₂. For the three PS NPs (PS-NH₂, PS-COOH, and PS-naked), EPS also enhanced their colloidal stabilities in the presence of NaCl. However, the effect of CaCl₂ on the colloidal stabilities of PS NPs in the presence of EPS depended on their surface functional groups. In CaCl₂, both Derjaguin-Landau-Verwey-Overbeek theory and molecular bridging explained the interaction between MNPs (both NPs and MPs) and EPS. Laser Direct Infrared and scanning electron microscope imaging showed that opalescent EPS corona formed on PS MPs via intermolecular-bridging by Ca²⁺, and the critical coagulation concentrations (70 mM in NaCl, 1.5 mM in CaCl₂) in EPS were much lower than that for PS NPs (1000 mM for NaCl; 65 mM for CaCl₂). PS-NH₂ NPs showed the highest increase in the growth of bacteria (Bacillus subtilis), followed by PS MPs and PS-naked NPs, while PS-COOH NPs had no significant effect. Biological response of PS NPs was unaffected by EPS, while EPS further enhanced the positive effects of PS MPs on bacterial growth.

A Review of Advancing Two-Dimensional Material Membranes for Ultrafast and Highly Selective Liquid Separation

Membrane-based nanotechnology possesses high separation efficiency, low economic and energy consumption, continuous operation modes and environmental benefits, and has been utilized in various separation fields. Two-dimensional nanomaterials (2DNMs) with unique atomic thickness have rapidly emerged as ideal building blocks to develop high-performance separation membranes. By rationally tailoring and precisely controlling the nanochannels and/or nanoporous apertures of 2DNMs, 2DNM-based membranes are capable of exhibiting unprecedentedly high permeation and selectivity properties. In this review, the latest breakthroughs in using 2DNM-based membranes as nanosheets and laminar membranes are summarized, including their fabrication, structure design, transport behavior, separation mechanisms, and applications in liquid separations. Examples of advanced 2D material (graphene family, 2D TMDs, MXenes, metal-organic frameworks, and covalent organic framework nanosheets) membrane designs with remarkably perm-selective properties are highlighted. Additionally, the development of strategies used to functionalize membranes with 2DNMs are discussed. Finally, current technical challenges and emerging research directions of advancing 2DNM membranes for liquid separation are shared.

Insight into UV-induced simultaneous photocatalytic degradation of Ti3C2Tx MXene and reduction of U(VI)

With the development of MXene as the efficient adsorbent for U(VI), the tendency of MXene coming into contact with U(VI) in wastewaters increases. Motivated by UV light irradiation applied in wastewater treatments, the UV light induced photochemical co-transformation of Ti₃C₂T_x MXene and U(VI) is studied. To clarify the role of U(VI) induced Ti₃C₂T_x aggregation in phototransformation of Ti₃C₂T_x, the aggregation kinetics of Ti₃C₂T_x in the presence of various valent radioactive ions are investigated, obtaining the critical coagulation concentrations (CCC) of Ti₃C₂T_x for Cs⁺, Sr²⁺, UO₂²⁺, Eu³⁺, and Th⁴⁺. Besides, the colloidal stability of UV-induced Ti₃C₂T_x as a function of standing time is discussed. The results show that the aggregation behavior of Ti₃C₂T_x induced by radioactive ions follows the classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory and the Schulze-Hardy rule. The UV irradiation will change the physicochemical properties and colloidal stabilities of Ti₃C₂T_x. Furthermore, the degradation of Ti₃C₂T_x can be accelerated by UV irradiation and further promoted by the presence of U(VI). The removal of U(VI) is highest in the case of Ti₃C₂T_x combined with UV irradiation via adsorption and reduction. This study provides an example demonstrating that the simultaneous transformation of Ti₃C₂T_x (adsorbent) and U(VI) (adsorbate) to mild toxic components.

Biotransformation of 2D Nanomaterials through Stimulated Bacterial Respiration-Produced Extracellular Reactive Oxygen Species: A Common but Overlooked Process

The biotransformation of 2D nanomaterials is still poorly understood, although their environmental fates are becoming an increasing concern with their broad applications. Here, we found that Ti₃C₂T_x nanosheets, a typical 2D nanomaterial, could be oxidized by reactive oxygen species (ROS) produced by both Gram-negative (Escherichia coli and Shewanella oneidensis) and Gram-positive (Bacillus subtilis) bacteria, with the formation of titanium dioxide (TiO₂) on the nanosheet surfaces and impairment of structural integrity. Specifically, Ti₃C₂T_x nanosheets stimulated bacterial respiration Complex I, leading to increased generation of extracellular O₂^•- and the formation of H₂O₂ and ^•OH via Fenton-like reactions, which intensified the oxidation of the nanosheets. Surface modifications with KOH and hydrazine (HMH), especially HMH, could limit bacterial oxidation of the nanosheets. These findings reveal a common but overlooked process in which oxygen-respiring bacteria are capable of oxidizing 2D nanosheets, providing new knowledge for environmental fate evaluation and future design of functional 2D nanomaterials.

Aqueous MXene/Xanthan Gum Hybrid Inks for Screen-Printing Electromagnetic Shielding, Joule Heater, and Piezoresistive Sensor

MXenes have exhibited potential for application in flexible devices owing to their remarkable electronic, optical, and mechanical properties. Printing strategies have emerged as a facile route for additive manufacturing of MXene-based devices, which relies on the rational design of functional inks with appropriate rheological properties. Herein, aqueous MXene/xanthan gum hybrid inks with tunable viscosity, excellent printability, and long-term stability are designed. Screen-printed flexible MXene films using such hybrid inks exhibit a high conductivity up to 4.8 × 10⁴  S m^-1 , which is suitable to construct multifunctional devices mainly including electromagnetic shielding, Joule heaters, and piezoresistive sensors. The average electromagnetic interference (EMI) shielding value can reach to 40.1 dB. In the Joule heater, the heating rate of printed MXene film can reach 20 °C s^-1 under a driving voltage of 4 V, with a highest steady-state temperature of 130.8 °C. An MXene-based piezoresistive sensor prepared by the printing interdigital electrode also presents good sensing performance with a short response time of 130 ms and wide pressure region up to 30 kPa. As a result, screen-printed MXene film exhibits reinforced multifunctional performance, which is promising for application in the next-generation of intelligent and wearable devices.

Optimized Anticorrosion of Polypyrrole Coating by Inverted-Electrode Strategy: Experimental and Molecular Dynamics Investigations

To improve the poor adhesion and the ensuing insufficient anticorrosion efficacy of electropolymerized polypyrrole (PPy) on copper surface, an inverted-electrode strategy was applied after the passivation procedure, for which the compact coating (PPy-I) was deposited on the substrate in a cathodic window. Morphological and physical characterizations revealed that PPy-I exerted satisfactory adhesion strength and suitable thickness and conductivity compared with the analogue prepared via the traditional protocol (PPy-T). Potentiodynamic polarization, electrochemical impedance spectroscopy and frequency modulation were employed to ascertain the propitious protection of PPy-I for copper in artificial seawater (ASW). Due to the dominant electroactivity, the PPy-I-coated sample possessed higher apparent current density and lower charge transfer resistance than its PPy-T-protected counterpart, which maintained the passivation of the substrate. Surface analysis also supported the viability of PPy-I for copper in ASW for a well-protected surface with inferior water wettability. Molecular dynamics simulations evidenced that PPy-I with the higher density retained efficient anticorrosion capacity on copper at elevated temperatures. Therein, the derived time-dependent spatial diffusion trajectories of ions were locally confined with low diffusion coefficients. Highly twisted pore passages and anodic protection behavior arising respectively from the tight coating architecture and electroactivity contributed to the adequate corrosion resistance of PPy-I-coated copper.

H2S sensing under various humidity conditions with Ag nanoparticle functionalized Ti3C2Tx MXene field-effect transistors

Despite the critical need to monitor H₂S, a hazardous gas, in environmental and medical settings, there are currently no reliable methods for rapid and sufficiently discriminative H₂S detection in real-world humid environments. Herein, targeted hybridizing of Ti₃C₂T_x MXene with Ag nanoparticles on a field-effect transistor (FET) platform has led to a step change in MXene sensing performance down to ppb levels, and enabled the very high selectivity and fast response/recovery time under room temperature for H₂S detection in humid conditions. For the first time, we present a novel relative humidity (RH) self-calibration strategy for the accurate detection of H₂S. This strategy can eliminate the influence of humidity and enables the accurate quantitative detection of gas in the total RH range. We further elucidate that the superior H₂S sensing performance is attributed to the electron and chemical sensitization effects. This study opens new avenues for the development of high-performance MXene-based sensors and offers a viable approach for addressing real-world humidity effect for gas sensors generally.

2D metal carbides and nitrides (MXenes) for sensors and biosensors

MXenes are layered two-dimensional (2D) materials discovered in 2011 (Ti₃C₂X) and are otherwise called 2D transition metal carbides, carbonitrides, and nitrides. These 2D layered materials have been in the limelight for a decade due to their interesting properties such as large surface area, high ion transport, biocompatibility, and low diffusion barrier. Therefore, MXenes are widely preferred by researchers for applications in electronics, sensing, biosensing, electrocatalysis, super-capacitors and fuel cells. There are a number of methods available for the bulk synthesis of MXene-based nanomaterials. In addition, the possibility of structural modification as required and its outstanding surface chemistry offer a fascinating interface for the development of novel biosensors. In this review, we specifically discuss important MXene synthesis routes. Moreover, critical parameters such as surface functionalization that can dictate the mechanical, electronic, magnetic, and optical properties of MXenes are also discussed. Following this, methods available for the surface functionalization and modification strategies of MXenes are also discussed. Furthermore, the emergence of gas, electrochemical, and optical biosensors based on MXenes since its first report is discussed in detail. Finally, future directions of MXenes biosensors for critical applications are discussed.

Two-dimensional Ti3C2 MXene-based nanostructures for emerging optoelectronic applications

Since the first discovery of Ti₃C₂ in 2011, two-dimensional (2D) transition-metal carbides, carbonitrides and nitrides, known as MXenes, have attracted significant attention. Due to their outstanding electronic, optical, mechanical, and thermal properties, versatile structures and surface chemistries, Ti₃C₂ MXenes have emerged as new candidates with great potential for applications in optoelectronic devices, such as photovoltaics, photodetectors and photoelectrochemical devices. The excellent metallic conductivity, high anisotropic carrier mobility, good structural and chemical stabilities, high optical transmittance, excellent mechanical strength, tunable work functions, and wide range of optical absorption properties of Ti₃C₂ MXene nanostructures are the key to their success in a number of electronic and photonic device applications. Herein, we summarize the fundamental properties and preparation of pure Ti₃C₂ MXenes, functionalized Ti₃C₂ MXenes and their hybrid nanocomposites, as well as their optoelectronic applications. In the end, the perspective and current challenges of Ti₃C₂ MXenes toward the development of advanced MXene-based nanostructures are briefly discussed for future optoelectronic applications.

Construction of Bi2O2CO3/Ti3C2 heterojunctions for enhancing the visible-light photocatalytic activity of tetracycline degradation

Bi₂O₂CO₃ (BOC) was successfully loaded on a highly conductive Ti₃C₂ surface by the hydrothermal method, forming a unique BOC/Ti₃C₂ heterostructure. The use of advanced characterization methods reveals the composition, morphology and photoelectric properties of the material. The results show that the interface formed by close contact between BOC and Ti₃C₂ provides an effective channel for charge transfer between the two. Importantly, the photocatalytic degradation efficiency of BOC/Ti₃C₂ for tetracycline (TC) is ~80%, which is significantly higher than the degradation efficiency of pure BOC and pure Ti₃C₂ for TC. In addition, BOC/Ti₃C₂ still has high catalytic activity in the degradation of complex mixed antibiotics. This is because BOC and Ti₃C₂ have large specific surface areas, high light absorption capacity and efficient carrier separation after recombination. At the same time, the detected superoxide radicals (O^2-) and holes (h⁺) are the main active substances. The degradation pathway and catalytic mechanism of the photocatalytic degradation of TC by BOC/Ti₃C₂ are further explained. This research designed and developed a BOC/Ti₃C₂ composite material for the photocatalytic degradation of tetracycline and mixed antibiotic wastewater, providing experimental methods and ideas for actual wastewater treatment.

Rational Design of Two-Dimensional Transition Metal Carbide/Nitride (MXene) Hybrids and Nanocomposites for Catalytic Energy Storage and Conversion

Electro-, photo-, and photoelectrocatalysis play a critical role toward the realization of a sustainable energy economy. They facilitate numerous redox reactions in energy storage and conversion systems, enabling the production of chemical feedstock and clean fuels from abundant resources like water, carbon dioxide, and nitrogen. One major obstacle for their large-scale implementation is the scarcity of cost-effective, durable, and efficient catalysts. A family of two-dimensional transition metal carbides, nitrides, and carbonitrides (MXenes) has recently emerged as promising earth-abundant candidates for large-area catalytic energy storage and conversion due to their unique properties of hydrophilicity, high metallic conductivity, and ease of production by solution processing. To take full advantage of these desirable properties, MXenes have been combined with other materials to form MXene hybrids with significantly enhanced catalytic performances beyond the sum of their individual components. MXene hybridization tunes the electronic structure toward optimal binding of redox active species to improve intrinsic activity while increasing the density and accessibility of active sites. This review outlines recent strategies in the design of MXene hybrids for industrially relevant electrocatalytic, photocatalytic, and photoelectrocatalytic applications such as water splitting, metal-air/sulfur batteries, carbon dioxide reduction, and nitrogen reduction. By clarifying the roles of individual material components in the MXene hybrids, we provide design strategies to synergistically couple MXenes with associated materials for highly efficient and durable catalytic applications. We conclude by highlighting key gaps in the current understanding of MXene hybrids to guide future MXene hybrid designs in catalytic energy storage and conversion applications.