VO2 Nanostructures for Batteries and Supercapacitors: A Review

Recent Advances of VO2 in Sensors and Actuators

Vanadium dioxide (VO2) stands out for its versatility in numerous applications, thanks to its unique reversible insulator-to-metal phase transition. This transition can be initiated by various stimuli, leading to significant alterations in the material's characteristics, including its resistivity and optical properties. As the interest in the material is growing year by year, the purpose of this review is to explore the trends and current state of progress on some of the applications proposed for VO2 in the field of sensors and actuators using literature review methods. Some key applications identified are resistive sensors such as strain, temperature, light, gas concentration, and thermal fluid flow sensors for microfluidics and mechanical microactuators. Several critical challenges have been recognized in the field, including the expanded investigation of VO2-based applications across multiple domains, exploring various methods to enhance device performance such as modifying the phase transition temperature, advancing the fabrication techniques for VO2 structures, and developing innovative modelling approaches. Current research in the field shows a variety of different sensors, actuators, and material combinations, leading to different sensor and actuator performance input ranges and output sensitivities.

Cytotoxicity of vanadium dioxide nanoparticles to human embryonic kidney cell line: Compared with vanadium(IV/V) ions

Vanadium dioxide (VO2) is a class of thermochromic material with potential applications in various fields. Massive production and wide application of VO2 raise the concern of its potential toxicity to human, which has not been fully understood. Herein, a commercial VO2 nanomaterial (S-VO2) was studied for its potential toxicity to human embryonic kidney cell line HEK293, and two most common vanadium ions, V(IV) and V(V), were used for comparison to reveal the related mechanism. Our results indicate that S-VO2 induces dose-dependent cellular viability loss mainly through the dissolved V ions of S-VO2 outside the cell rather than S-VO2 particles inside the cell. The dissolved V ions of S-VO2 overproduce reactive oxygen species to trigger apoptosis and proliferation inhibition via several signaling pathways of cell physiology, such as MAPK and PI3K-Akt, among others. All bioassays indicate that the differences in toxicity between S-VO2, V(IV), and V(V) in HEK293 cells are very small, supporting that the toxicity is mainly due to the dissolved V ions, in the form of V(V) and/or V(IV), but the V(V)'s behavior is more similar to S-VO2 according to the gene expression analysis. This study reveals the toxicity mechanism of nanosized VO2 at the molecular level and the role of dissolution of VO2, providing valuable information for safe applications of vanadium oxides.

Charge Puddles Driven Complex Crossover of Magnetoresistance in Non-Topological Sulfur Doped Antimony Selenide Nanowires

A race to achieve a crossover from positive to negative magnetoresistance is intense in the field of nanostructured materials to reduce the size of memory devices. Here, the unusual complex magnetoresistance in nonmagnetic sulfur-doped Sb2 Se3  nanowires is demonstrated. Intentionally, sulfur is doped in such a way to nearly achieve the charge neutrality point that is evident from switching of carrier type from p-type to n-type at 13 K as inferred from the low-temperature thermoelectric power measurements. A change from 3D variable range hopping (VRH) to power law transport with α = 0.18  in resistivity measurement signifies a Luttinger liquid transport with weak links through the nanowires. Interestingly, high magnetic field induced negative magnetoresistance (NMR) occurring in hole dominated temperature regimes can only be explained by invoking the concept of charge puddles. Spot energy dispersive spectroscopy (EDS), magnetic force microscopy (MFM) measurements, Tmott  and Regel plot indicate an enhanced disorder in these sulfurized nanowires that are found to be the precursor for the formation of these charge puddles. Tunability of conducting states in these nanowires is investigated in the light of interplay of carrier type, magnetic field, temperature, and intricate intra-inter wire transport that makes this nanowires potential for large scale spintronic devices.

Morphology Controlled Deposition of Vanadium Oxide (VOx) Nanoparticles on the Surface of Highly Reduced Graphene Oxide for the Photocatalytic Degradation of Hazardous Organic Dyes

Semiconducting nanomaterials based heterogeneous photocatalysis represent a low-cost, versatile technique for environmental remediation, including pollution mitigation, energy management and other environmental aspects. Herein, we demonstrate the syntheses of various heterogeneous photocatalysts based on highly reduced graphene oxide (HRG) and vanadium oxide (VOx)-based nanocomposites (HRG-VOx). Different shapes (rod, sheet and urchin forms) of VOx nanoparticles were successfully fabricated on the surface of HRG under solvo-/hydrothermal conditions by varying the amount of water and ethanol. The high concentration of water in the mixture resulted in the formation of rod-shaped VOx nanoparticles, whereas increasing the amount of ethanol led to the production of VOx sheets. The solvothermal condition using pure ethanol as solvent produced VOx nano-urchins on the surface of HRG. The as-prepared hybrid materials were characterized using various spectroscopic and microscopic techniques, including X-ray diffraction, UV-vis, FTIR, SEM and TEM analyses. The photocatalytic activities of different HRG-VOx nanocomposites were investigated for the photodegradation of methylene blue (MB) and methyl orange (MO). The experimental data revealed that all HRG-VOx composite-based photocatalysts demonstrated excellent performance toward the photocatalytic degradation of the organic dyes. Among all photocatalysts studied, the HRG-VOx nanocomposite consisting of urchin-shaped VOx nanoparticles (HRG-VOx-U) demonstrated superior photocatalytic properties towards the degradation of dyes.

Beaded CoSe2-C Nanofibers for High-Performance Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries are regarded as highly promising energy storage devices due to their high theoretical specific capacity and high energy density. Nevertheless, the commercial application of Li-S batteries is still restricted by poor electrochemical performance. Herein, beaded nanofibers (BNFs) consisting of carbon and CoSe2 nanoparticles (CoSe2/C BNFs) were prepared by electrospinning combined with carbonization and selenization. Benefitting from the synergistic effect of physical adsorption and chemical catalysis, the CoSe2/C BNFs can effectively inhibit the shuttle effect of lithium polysulfides and improve the rate performance and cycle stability of Li-S batteries. The three-dimensional conductive network provides a fast electron and ion transport pathway as well as sufficient space for alleviating the volume change. CoSe2 can not only effectively adsorb the lithium polysulfides but also accelerate their conversion reaction. The CoSe2/C BNFs-S cathode has a high reversible discharge specific capacity of 919.2 mAh g-1 at 0.1 C and presents excellent cycle stability with a low-capacity decay rate of 0.05% per cycle for 600 cycles at 1 C. The combination of the beaded carbon nanofibers and polar metal selenides sheds light on designing high-performance sulfur-based cathodes.

Does Water-in-Salt Electrolyte Subdue Issues of Zn Batteries?

Zn-metal batteries (ZnBs) are safe and sustainable because of their operability in aqueous electrolytes, abundance of Zn, and recyclability. However, the thermodynamic instability of Zn metal in aqueous electrolytes is a major bottleneck for its commercialization. As such, Zn deposition (Zn2+ → Zn(s)) is continuously accompanied by the hydrogen evolution reaction (HER) (2H+ → H2 ) and dendritic growth that further accentuate the HER. Consequently, the local pH around the Zn electrode increases and promotes the formation of inactive and/or poorly conductive Zn passivation species (Zn + 2H2 O → Zn(OH)2 + H2 ) on the Zn. This aggravates the consumption of Zn and electrolyte and degrades the performance of ZnB. To propel HER beyond its thermodynamic potential (0 V vs standard hydrogen electrode (SHE) at pH 0), the concept of water-in-salt-electrolyte (WISE) has been employed in ZnBs. Since the publication of the first article on WISE for ZnB in 2016, this research area has progressed continuously. Here, an overview and discussion on this promising research direction for accelerating the maturity of ZnBs is provided. The review briefly describes the current issues with conventional aqueous electrolyte in ZnBs, including a historic overview and basic understanding of WISE. Furthermore, the application scenarios of WISE in ZnBs are detailed, with the description of various key mechanisms (e.g., side reactions, Zn electrodeposition, anions or cations intercalation in metal oxide or graphite, and ion transport at low temperature).

Overview of the oxygen vacancy effect in bimetallic spinel and perovskite oxide electrode materials for high-performance supercapacitors

Bimetallic spinel and perovskite metal oxide materials are advanced electrode materials for supercapacitor (SC) applications because of their low-cost, distinct crystal structures, eco-friendly nature, and high conductivity. However, they suffer from the disadvantages of poor ion-diffusion kinetics and pulverization issues during cyclability tests. Along with a deeper understanding of redox chemistry, the role of oxygen vacancies (OVs) in electrode materials to support the reaction kinetics for excellence in SCs must be clarified. In this review, we highlight for the first time the importance of OVs and summarize various design strategies for the preparation of advanced bimetallic spinel oxides and perovskites with improved electrochemical performances for SC applications. With new insights, we envision that the SC research community would endeavor to utilize the benefits of OVs effectively for the development of high-performance SCs.

Stable structure and fast ion diffusion: N-doped VO2 3D porous nanoflowers for applications in ultrafast rechargeable aqueous zinc-ion batteries

Aqueous rechargeable zinc-ion batteries (ARZIBs) are promising candidates for fast-charging energy-storage systems. The issues of stronger interactions between Zn²⁺ and the cathode for ultrafast ARZIBs can be partially addressed by enhancing mass transfer and ion diffusion of the cathode. Herein, via thermal oxidation for the first time, N-doped VO₂ porous nanoflowers with short ion diffusion paths and improved electrical conductivity were synthesized as ARZIBs cathode materials. The introduction of nitrogen derived from the vanadium-based-zeolite imidazolyl framework (V-ZIF) contributes to enhanced electrical conductivity and faster ion diffusion, while the thermal oxidation of the VS₂ precursor assists the final product in exhibiting a more stable three-dimensional nanoflower structure. In particular, the N-doped VO₂ cathode shows excellent cycle stability and superior rate capability with the delivered capacities of 165.02 mAh g^-1 and 85 mAh g^-1, at 10 A g^-1 and 30 A g^-1, and the capacity retention of 91.4% after 2200 cycles and 99% after 9000 cycles, respectively. Remarkably, the battery takes less than 10 s to be fully charged at 30 A g^-1. Hence, this work provides a new avenue for designing unique nanostructured vanadium oxides and developing electrode materials suitable for ultrafast charging.

2D Zinc Oxide - Synthesis, Methodologies, Reaction Mechanism, and Applications

Zinc oxide (ZnO) is a thermally stable n-type semiconducting material. ZnO 2D nanosheets have mainly gained substantial attention due to their unique properties, such as direct bandgap and strong excitonic binding energy at room temperature. These are widely utilized in piezotronics, energy storage, photodetectors, light-emitting diodes, solar cells, gas sensors, and photocatalysis. Notably, the chemical properties and performances of ZnO nanosheets largely depend on the nano-structuring that can be regulated and controlled through modulating synthetic strategies. Two synthetic approaches, top-down and bottom-up, are mainly employed for preparing ZnO 2D nanomaterials. However, owing to better results in producing defect-free nanostructures, homogenous chemical composition, etc., the bottom-up approach is extensively used compared to the top-down method for preparing ZnO 2D nanosheets. This review presents a comprehensive study on designing and developing 2D ZnO nanomaterials, followed by accenting its potential applications. To begin with, various synthetic strategies and attributes of ZnO 2D nanosheets are discussed, followed by focusing on methodologies and reaction mechanisms. Then, their deliberation toward batteries, supercapacitors, electronics/optoelectronics, photocatalysis, sensing, and piezoelectronic platforms are further discussed. Finally, the challenges and future opportunities are featured based on its current development.

Phase-engineered cathode for super-stable potassium storage

The crystal phase structure of cathode material plays an important role in the cell performance. During cycling, the cathode material experiences immense stress due to phase transformation, resulting in capacity degradation. Here, we show phase-engineered VO₂ as an improved potassium-ion battery cathode; specifically, the amorphous VO₂ exhibits superior K storage ability, while the crystalline M phase VO₂ cannot even store K⁺ ions stably. In contrast to other crystal phases, amorphous VO₂ exhibits alleviated volume variation and improved electrochemical performance, leading to a maximum capacity of 111 mAh g^-1 delivered at 20 mA g^-1 and over 8 months of operation with good coulombic efficiency at 100 mA g^-1. The capacity retention reaches 80% after 8500 cycles at 500 mA g^-1. This work illustrates the effectiveness and superiority of phase engineering and provides meaningful insights into material optimization for rechargeable batteries.

Active optical modulation of quasi-BICs in Si-VO2 hybrid metasurfaces

Active optical modulation breaks the limitation of a passive device, providing a new, to the best of our knowledge, alternative to achieve high-performance optical devices. The phase-change material vanadium dioxide (VO₂) plays an important role in the active device due to its unique reversible phase transition. In this work, we numerically investigate the optical modulation in resonant Si-VO₂ hybrid metasurfaces. The optical bound states in the continuum (BICs) in an Si dimer nanobar metasurface are studied. The quasi-BICs resonator with high quality factor (Q-factor) can be excited by rotating one of the dimer nanobars. The multipole response and near-field distribution confirm that magnetic dipoles dominate this resonance. Moreover, a dynamically tunable optical resonance is achieved by integrating a VO₂ thin film to this quasi-BICs Si nanostructure. With the increase of temperature, VO₂ gradually changes from the dielectric state to metal state, and the optical response exhibits a significant change. Then, the modulation of the transmission spectrum is calculated. Situations where VO₂ is located in different positions are also discussed. A relative transmission modulation of 180% is achieved. These results fully confirm that the VO₂ film shows an excellent ability to modulate the quasi-BICs resonator. Our work provides a route for the active modulation of resonant optical devices.

Vanadium Dioxide Nanosheets Supported on Carbonized Cotton Fabric as Bifunctional Textiles for Flexible Pressure Sensors and Zinc-Ion Batteries

Flexible pressure sensors and aqueous batteries have been widely used in the rapid development of wearable electronics. The synergistic functionalities of versatile materials with multidimensional architectures are recognized to have a significant impact on the performance of flexible electronics. Herein, a facile hydrothermal strategy was demonstrated to conformally grow vanadium dioxide nanosheets on carbonized cotton fabrics (VO₂/CCotton), which is a candidate material used in flexible piezoresistive sensors. As a result, the VO₂/CCotton-based pressure sensor behaved with high sensitivity (S = 7.12 kPa^-1 in the pressure range of 0-2.0 kPa) and a stable sensing ability in a wide pressure scale of 0-120 kPa. Further practical applications were performed in monitoring delicate physiological signals as well, such as twisting, blowing, and voice vibration recognitions. In addition, another application for energy storage was investigated as well. A quasi-solid-state aqueous zinc-ion battery was assembled with VO₂/CCotton as the cathode and a film of Zn nanosheets/carbon nanotube as the anode. A capacity as high as 301.5 mAh g^-1 and remarkable durability of 88.7% capacity retention after 5000 cycles at 10 A g^-1 were found. These exceptional outcomes are attributed to the unique three-dimensional architecture and the prominent synergetic effects of CCotton and VO₂ and allow for the proposal of novel guidelines for next-generation multifunctional flexible electronics.

The Lattice Distortion, Defect Evolution and Electrochemical Performance Improvement in Zn-VO2(B) Nanorods

Cathode materials of energy storage batteries have attracted extensive attention because of the importance in deciding the rate performance and long cycle property of batteries. Herein, we report a simple and environmentally friendly solvothermal method to prepare Zn-doped VO₂(B) cathode materials. The introduction of zinc ions can effectively regulate the lattice structure, surface morphology and internal defect state of Zn-VO₂(B) nano materials. The sample with Zn content x = 1.5% has smaller cell volume and grain size, and higher concentration of vacancy defects. These microstructures ensure the structural stability during ion embedding process and, thus, this sample shows excellent electrochemical performances. The capacitance retention rate still maintains 88% after 1000 cycles at the current density of 0.1 A·g^-1. The enhanced performances of Zn-doped VO₂(B) samples may lay a foundation for the improvement of electrochemical performances of VO₂(B) cathode materials for energy storage batteries in the future.

Emerging Electrochromic Materials and Devices for Future Displays

With the rapid development of optoelectronic fields, electrochromic (EC) materials and devices have received remarkable attention and have shown attractive potential for use in emerging wearable and portable electronics, electronic papers/billboards, see-through displays, and other new-generation displays, due to the advantages of low power consumption, easy viewing, flexibility, stretchability, etc. Despite continuous progress in related fields, determining how to make electrochromics truly meet the requirements of mature displays (e.g., ideal overall performance) has been a long-term problem. Therefore, the commercialization of relevant high-quality products is still in its infancy. In this review, we will focus on the progress in emerging EC materials and devices for potential displays, including two mainstream EC display prototypes (segmented displays and pixel displays) and their commercial applications. Among these topics, the related materials/devices, EC performance, construction approaches, and processing techniques are comprehensively disscussed and reviewed. We also outline the current barriers with possible solutions and discuss the future of this field.

Element doping: a marvelous strategy for pioneering the smart applications of VO2

Smart materials are leading the future of materials by virtue of their autonomous response behavior to external stimuli; it is widely believed their development and application will bring a new revolution. Among them, vanadium dioxide (VO₂) is a special one showing a unique multi-stimulus responsive metal-insulator transition (MIT) accompanied by a structural phase transition (SPT) with striking changes of physical properties including optical, electrical and thermal properties, etc., making it ideal for smart windows, micro-bolometers, actuators, etc. Since the attractive performances of VO₂ are rooted in MIT behavior (coupled with SPT), element doping becomes a powerful tool in tailoring VO₂ performance. Oriented on the practical requirements, element-doped VO₂ is more promising and competitive in terms of performance, prospect, and cost. Here we focus specifically on element-doped VO₂, the recent progress and potential challenges of which are discussed. We devote attention to the crucial roles of element doping in modulating the properties and driving the practicality of VO₂, aiming to inspire current research to pioneer new applications of VO₂.

Will Vanadium-Based Electrode Materials Become the Future Choice for Metal-Ion Batteries?

Metal-ion batteries have emerged as promising candidates for energy storage system due to their unlimited resources and competitive price/performance ratio. Vanadium-based compounds have diverse oxidation states rendering various open-frameworks for ions storage. To date, some vanadium-based polyanionic compounds have shown great potential as high-performance electrode materials. However, there has been a growing concern regarding the cost and environmental risk of vanadium. In this Review, all links in the industry chain of vanadium-based electrodes were comprehensively summarized, starting with an analysis of the resources, applications, and price fluctuation of vanadium. The manufacturing processes of the vanadium extraction and recovery technologies were discussed. Moreover, the commercial potentials of some typical electrode materials were critically appraised. Finally, the environmental impact and sustainability of the industry chain were evaluated. This critical Review will provide a clear vision of the prospects and challenges of developing vanadium-based electrode materials.

One-Step Route to Fe2O3 and FeSe2 Nanoparticles Loaded on Carbon-Sheet for Lithium Storage

Iron-based anode materials, such as Fe₂O₃ and FeSe₂ have attracted widespread attention for lithium-ion batteries due to their high capacities. However, the capacity decays seriously because of poor conductivity and severe volume expansion. Designing nanostructures combined with carbon are effective means to improve cycling stability. In this work, ultra-small Fe₂O₃ nanoparticles loaded on a carbon framework were synthesized through a one-step thermal decomposition of the commercial C₁₅H₂₁FeO₆ [Iron (III) acetylacetonate], which could be served as the source of Fe, O, and C. As an anode material, the Fe₂O₃@C anode delivers a specific capacity of 747.8 mAh g⁻¹ after 200 cycles at 200 mA g⁻¹ and 577.8 mAh g⁻¹ after 365 cycles at 500 mA g⁻¹. When selenium powder was introduced into the reaction system, the FeSe₂ nano-rods encapsulated in the carbon shell were obtained, which also displayed a relatively good performance in lithium storage capacity (852 mAh g⁻¹ after 150 cycles under the current density of 100 mA·g⁻¹). This study may provide an alternative way to prepare other carbon-composited metal compounds, such as FeN_x@C, FeP_x@C, and FeS_x@C, and found their applications in the field of electrochemistry.

VO2 as a Highly Efficient Electrocatalyst for the Oxygen Evolution Reaction

Herein, we report high electrocatalytic activity of monoclinic VO₂ (M1 phase) for the oxygen evolution reaction (OER) for the first time. The single-phase VO₂ (M1) nanoparticles are prepared in the form of uniformly covering the surface of individual carbon fibers constituting a carbon fiber paper (CFP). The VO₂ nanoparticles reveal the metal-insulator phase transition at ca. 65 °C (heating) and 62 °C (cooling) with low thermal hysteresis, indicating a high concentration of structural defect which is considered a grain boundary among VO₂ nanoparticles with some particle coalescence. Consequently, the VO₂/CFP shows a high electrocatalytic OER activity with the lowest η₁₀ (350 mV) and Tafel slope (46 mV/dec) values in a 1 M aqueous solution of KOH as compared to those of the vacuum annealed V₂O₅ and the hydrothermally grown VO₂ (M1), α-V₂O₅, and γ′-V₂O₅. The catalytically active site is considered V⁴⁺ components and V^4+/5+ redox couples in VO₂. The oxidation state of V⁴⁺ is revealed to be more favorable to the OER catalysis compared to that of V⁵⁺ in vanadium oxide through comparative studies. Furthermore, the amount of V⁵⁺ component is found to be increased on the surface of VO₂ catalyst during the OER, giving rise to the performance degradation. This work suggests V⁴⁺ and its redox couple as a novel active component for the OER in metal-oxide electrocatalysts.

Improvement of Lithium Storage Performance of Silica Anode by Using Ketjen Black as Functional Conductive Agent

In this paper, SiO₂ aerogels were prepared by a sol–gel method. Using Ketjen Black (KB), Super P (SP) and Acetylene Black (AB) as a conductive agent, respectively, the effects of the structure and morphology of the three conductive agents on the electrochemical performance of SiO₂ gel anode were systematically investigated and compared. The results show that KB provides far better cycling and rate performance than SP and AB for SiO₂ anode electrodes, with a reversible specific capacity of 351.4 mA h g⁻¹ at 0.2 A g⁻¹ after 200 cycles and a stable 311.7 mA h g⁻¹ at 1.0 A g⁻¹ after 500 cycles. The enhanced mechanism of the lithium storage performance of SiO₂-KB anode was also proposed.

Block copolymer-assisted synthesis of VO2 (B) microflowers for supercapacitor applications

Nanoporous metal oxides are appealing candidates for energy storage applications as they can interact with guest species from inner and outer surfaces, leading to improved energy and power density performance. We have synthesized VO₂ (B) microflowers with a stable phase and tailored porous structures utilizing block copolymers to achieve excellent supercapacitor performance.

Tuning of Optical Phonons in α-MoO3-VO2 Multilayers

Merging the properties of VO₂ and van der Waals (vdW) materials has given rise to novel tunable photonic devices. Despite recent studies on the effect of the phase change of VO₂ on tuning near-field optical response of phonon polaritons in the infrared range, active tuning of optical phonons (OPhs) using far-field techniques has been scarce. Here, we investigate the tunability of OPhs of α-MoO₃ in a multilayer structure with VO₂. Our experiments show the frequency and intensity tuning of 2 cm^-1 and 11% for OPhs in the [100] direction and 2 cm^-1 and 28% for OPhs in the [010] crystal direction of α-MoO₃. Using the effective medium theory and dielectric models of each layer, we verify these findings with simulations. We then use loss tangent analysis and remove the effect of the substrate to understand the origin of these spectral characteristics. We expect that these findings will assist in intelligently designing tunable photonic devices for infrared applications, such as tunable camouflage and radiative cooling devices.

Commercialization-Driven Electrodes Design for Lithium Batteries: Basic Guidance, Opportunities, and Perspectives

Current lithium-ion battery technology is approaching the theoretical energy density limitation, which is challenged by the increasing requirements of ever-growing energy storage market of electric vehicles, hybrid electric vehicles, and portable electronic devices. Although great progresses are made on tailoring the electrode materials from methodology to mechanism to meet the practical demands, sluggish mass transport, and charge transfer dynamics are the main bottlenecks when increasing the areal/volumetric loading multiple times to commercial level. Thus, this review presents the state-of-the-art developments on rational design of the commercialization-driven electrodes for lithium batteries. First, the basic guidance and challenges (such as electrode mechanical instability, sluggish charge diffusion, deteriorated performance, and safety concerns) on constructing the industry-required high mass loading electrodes toward commercialization are discussed. Second, the corresponding design strategies on cathode/anode electrode materials with high mass loading are proposed to overcome these challenges without compromising energy density and cycling durability, including electrode architecture, integrated configuration, interface engineering, mechanical compression, and Li metal protection. Finally, the future trends and perspectives on commercialization-driven electrodes are offered. These design principles and potential strategies are also promising to be applied in other energy storage and conversion systems, such as supercapacitors, and other metal-ion batteries.

Effects of VO2 nanoparticles on human liver HepG2 cells: Cytotoxicity, genotoxicity, and glucose and lipid metabolism disorders

The rapid development of smart materials stimulates the production of vanadium dioxide (VO₂) nanomaterials. This significantly increases the population exposure to VO₂ nanomaterials via different pathways, and thus urges us to pay more attentions to their biosafety. Liver is the primary accumulation organ of nanomaterials in vivo, but the knowledge of effects of VO₂ nanomaterials on the liver is extremely lacking. In this work, we comprehensively evaluated the effects of a commercial VO₂ nanoparticle, S-VO₂, in a liver cell line HepG2 to illuminate the potential hepatic toxicity of VO₂ nanomaterials. The results indicated that S-VO₂ was cytotoxic and genotoxic to HepG2 cells, mainly by inhibiting the cell proliferation. Apoptosis was observed at higher dose of S-VO₂, while DNA damage was detected at all tested concentrations. S-VO₂ particles were internalized by HepG2 cells and kept almost intact inside cells. Both the particle and dissolved species of S-VO₂ contributed to the observed toxicities. They induced the overproduction of ROS, and then caused the mitochondrial dysfunction, ATP synthesis interruption, and DNA damages, consequently arrested the cell cycle in G2/M phase and inhibited the proliferation of HepG2 cells. The S-VO₂ exposure also resulted in the upregulations of glucose uptake and lipid content in HepG2 cells, which were attributed to the ROS production and autophagy flux block, respectively. Our findings offer valuable insights into the liver toxicity of VO₂ nanomaterials, benefiting their safely practical applications.

Oxygen Defect Hydrated Vanadium Dioxide/Graphene as a Superior Cathode for Aqueous Zn Batteries

Zinc ion batteries have become a new type of energy storage device because of the low cost and high safety. Among the various cathode materials, vanadium-oxygen compounds stand out due to their high theoretical capacity and variable chemistry valence state. Here, we construct a 3D spongy hydrated vanadium dioxide composite (O_d-HVO/rG) with abundant oxygen vacancy defects and graphene modifications. Thanks to the stable structure and abundant active sites, O_d-HVO/rG exhibits superior electrochemical properties. In aqueous electrolyte, the O_d-HVO/rG cathode provides high initial charging capacity (428.6 mAh/g at 0.1 A/g), impressive rate performance (186 mAh/g even at 20 A/g), and cycling stability, which can still maintain 197.5 mAh/g after 2000 cycles at 10 A/g. Also, the superior specific energy of 245.3 Wh/kg and specific power of 14142.7 W/kg are achieved. In addition, MXene/O_d-HVO/rG cathode materials are prepared and PAM/ZnSO₄ hydrogel electrolytes are applied to assemble flexible soft pack quasi-solid-state zinc ion batteries, which also exhibit excellent flexibility and cycling stability (206.6 mAh/g after 2000 cycles). This work lays the foundation for advances in rechargeable aqueous zinc ion batteries, while revealing the potential for practical applications of flexible energy storage devices.