Coal fly ash as a resource for rare earth elements

Hazard profiles, distribution trends, and sources tracing of rare earth elements in dust of kindergartens in Beijing

Children, the most vulnerable group in urban populations, are susceptible to the effects of pollution in urban environments. It is significant to evaluate the influence of rare earth elements (REEs) from kindergartens dust (KD) in Beijing on children's health. This study collected surface dust from 73 kindergartens in 16 districts of the mega-city of Beijing, and the concentrations of 14 REEs in KD, including La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu, were detected. The contamination levels, source apportionment, and health exposure risk of REEs were comprehensively investigated. The results indicate that the contamination levels of 14 REEs are within the acceptable range. Nevertheless, Eu, Ce, La, Pr, Nd, Gd, and Sm show high enrichment due to anthropogenic influence. Besides, KD is rich in light rare earth elements (LREEs) (90.97 mg kg-1) compared to heavy rare earth elements (HREEs) (8.65 mg kg-1). The distribution parameter patterns of REEs suggest that complicated anthropogenic sources influence the enrichment of REEs in KD. The main sources of REEs in KD include natural sources (40.64%), mixed high-tech industries and construction (33.89%), and mixed coal-fired, historical industrial, and transportation sources (26.47%). The primary pathway for daily intake of REEs in children is through ingestion, which presents a low but not negligible health risk. This study provides guidance for the effective risk management of REEs in KD.

Evaluating emissions and air quality implications of residential waste incineration

In Europe mainly at winter season the PM levels exceed air quality limits, which correlated with the operation of solid-fired boilers. More and more people are returning to using these devices due to energy shortage caused by the pandemic and regional conflicts. In addition, the phenomena of co-burning fuels and municipal waste in residential boilers in primarily fuel poverty households increases further the amount of pollutants in the atmosphere. This study aims to correlate the quantity and quality of air pollutants with the type of fuel (wood and wastes) burned. Combustion experiments were conducted using oak fuel mixed with three waste groups: (1) plastics (PP, HDPE, PET); (2) textiles (polyester-PES, cotton-COT); and (3) papers (cardboard-CARD, glossy coated paper-GCP, 84C/PAP). The addition of waste to wood fuel altered the morphology of emitted particles. While waste burning doesn't always increase particle quantity, it significantly raises PAH concentrations. A strong relationship exists between waste type, particle morphology, and PAH quality, where with lower molecular weight PAHs linked to tar agglomerates and higher ones to soot agglomerates with inorganic crystals.

Assessing the Potential of Rare Earth Elements in Bottom Ash from Coal Combustion in Poland

The aim of the research was to assess the potential of bottom ash from Polish coal-fired power plants as an alternative source of rare earth elements (REY). The potential of these ashes was compared with fly ash from the same coal combustion cycle. The phase and chemical composition, as well as REY, were determined using: X-ray diffraction and inductively coupled plasma mass spectrometry. The tested ashes were classified as inert-low pozzolanic and inert-medium pozzolanic, as well as sialic and ferrosialic, with enrichment in detrital material. The phase and chemical composition of bottom ash was similar to fly ash from the same fuel combustion cycle. The REY content in the ash was 199-286 ppm and was lower than the average for global deposits, and the threshold value was considered profitable for recovery from coal. Bottom ash's importance as a potential source of REY will increase by recovering these metals from separated amorphous glass and mullite and grains rich in Al, Mg, K, and P. The industrial value of bottom ash as an alternative source of REY was similar to fly ash from the same fuel combustion cycle.

Elevated levels of environmental radioactivity in fluvial sediment: origin and health risk assessment

To study the geogenic processes of naturally occurring radioactive materials' (NORMs') distribution, a transboundary Himalayan river (Punarbhaba) is chosen due to its trivial anthropogenic impacts. In explaining the genesis of radionuclides, transition elements (Sc, Ti, V, and Fe), rare-earth-elements (REEs: La, Eu, Ce, Yb, Sm, and Lu), Ta, Hf, Th, and U were analysed in 30 riverbed sediments collected from the Bangladeshi portion of the river. Elemental abundances and NORMs' activity were measured by neutron activation analysis and HPGe-gamma-spectrometry, respectively. Averagen=30 radioactivity concentrations of 226Ra (68.4 Bq kg-1), 232Th (85.7 Bq kg-1), and 40K (918 Bq kg-1) were 2.0-2.3-fold higher, which show elevated results compared to the corresponding world mean values. Additionally, mean-REE abundances were 1.02-1.38-times higher than those of crustal origin. Elevated (relative to earth-crust) ratios of Th/U (=3.95 ± 1.84) and 232Th/40K and statistical demonstrations invoke Th-dominant heavy minerals, indicating the role of kaolinite clay mineral abundance/granitic presence. However, Th/Yb, La/V, Hf/Sc, and Th/Sc ratios reveal the presence of felsic abundances, hydrodynamic sorting, and recycling of sedimentary minerals. Geo-environmental indices demonstrated the enrichment of chemical elements in heavy minerals, whereas radiological indices presented ionizing radiation concerns, e.g., the average absorbed-gamma-dose rate (123.1 nGy h-1) was 2.24-fold higher compared to the threshold value which might cause chronic health impacts depending on the degree of exposure. The mean excess lifetime cancer risk value for carcinogen exposure was 5.29 × 10-4 S v-1, which is ∼2-times greater than the suggested threshold. Therefore, plausible extraction of heavy minerals and using residues as building materials can alleviate the two-reconciling problems: (1) radiological risk management and (2) fluvial navigability.

Predicting rare earth elements concentration in coal ashes with multi-task neural networks

The increasing demand for rare earth elements (REEs) makes them a scarce strategic resource for technical developments. In that regard, harvesting REEs from coal ashes-a waste byproduct from coal power plants-offers an alternative solution to conventional ore-based extraction. However, this approach is bottlenecked by our ability to screen coal ashes bearing large concentrations of REEs from feedstocks-since measuring the REE content in ashes is a time-consuming and costly task requiring advanced analytical tools. Here, we propose a machine learning approach to predict the REE contents based on the bulk composition of coal ashes, easily measurable under the routine testing protocol. We introduce a multi-task neural network that simultaneously predicts the contents of different REEs. Compared to the single-task model, this model exhibits notably improved accuracy and reduced sensitivity to noise. Further model analyses reveal key data patterns for screening coal ashes with high REE concentrations. Additionally, we showcase the utilization of transfer learning to improve the adaptability of our model to coal ashes from a distinct source.

Concentration, speciation and risk effects of multiple environmentally sensitive trace elements in respirable fine-grained fly ash

Respirable fine-grained fly ash (RFA) is captured very inefficiently by existing air purification devices of power plant, leading to increasing concerns regarding their migration and subsequent interaction with body due to fine particle size and its complex toxic composition. Trace elements of RFA in three groups with five different sizes between 8-13 µm were analyzed in terms of available concentration, speciation and risk effects. The concentration, pollution level and ecological risk level of elements in RFA were related to particle sizes. Chronic non-carcinogenic effect risk (NER) and carcinogenic effect risk (CER) were negatively correlated with particle size. The individual weight of exposed subjects, corresponding trace elements concentration and ingestion rate in RFA were three significant variables influencing CER. NER and CER had a tenfold exaggerated effect when calculated using total element concentration of RFA. In addition to individual differences and exposure conditions, trace element properties, speciation and available concentration were the dominant factor responsible for ecological and environmental effects of trace elements in RFA, following the order As>Ni, Mn>Cr>Pb>Cu>Zn. Results of this work highlight the effects and differences of trace elements in RFA on ecology and health, and provide a basis for further pollution control and human health warning.

Rare Earths-The Answer to Everything

Rare earths, scandium, yttrium, and the fifteen lanthanoids from lanthanum to lutetium, are classified as critical metals because of their ubiquity in daily life. They are present in magnets in cars, especially electric cars; green electricity generating systems and computers; in steel manufacturing; in glass and light emission materials especially for safety lighting and lasers; in exhaust emission catalysts and supports; catalysts in artificial rubber production; in agriculture and animal husbandry; in health and especially cancer diagnosis and treatment; and in a variety of materials and electronic products essential to modern living. They have the potential to replace toxic chromates for corrosion inhibition, in magnetic refrigeration, a variety of new materials, and their role in agriculture may expand. This review examines their role in sustainability, the environment, recycling, corrosion inhibition, crop production, animal feedstocks, catalysis, health, and materials, as well as considering future uses.

Ecological and Health Risks Attributed to Rare Earth Elements in Coal Fly Ash

The occurrence and distribution of yttrium and rare earth elements (REYs), along with major elements and heavy metal(loid)s (HMs) in coal fly ash (CFA) from five coal-fired power plants (CFPPs), were analyzed, and the REY-associated ecological and health risks were assessed. The individual REYs in CFA were abundant in the following order: Ce > La > Nd > Y > Pr > Gd > Sm > Dy > Er > Yb > Eu > Ho > Tb > Tm > Lu. The total REY content ranged from 135 to 362 mg/kg, averaging 302 mg/kg. The mean light-to-heavy REY ratio was 4.1, indicating prevalent light REY enrichment in CFA. Significantly positive correlations between the REYs suggested that they coexist and share similar origins in CFA. REYs were estimated to pose low to moderate ecological risks, with risk index (RI) values ranging from 66 to 245. The hazard index (HI) and target cancer risk (TCR) of REYs from CFA, estimated to be higher for children (HIc = 0.15, TCRc = 8.4 × 10-16) than for adults (HIa = 0.017, TCRa = 3.6 × 10-16), were well below the safety limits (HI = 1, TCR = 1.0 × 10-6). However, the danger to human health posed by HMs in the same CFA samples (HIc = 5.74, TCRc = 2.6 × 10-4, TCRa = 1.1 × 10-4) exceeded the safe thresholds (excl. HIa = 0.63). The mean RI and HI attributed to REYs in CFA were 14% and 2.6%, respectively, of the total risks that include HMs.

Spatial Variability of Rare Earth Elements in Groundwater in the Vicinity of a Coal-Fired Power Plant and Associated Health Risk

This study investigated the occurrence and distribution of rare earth elements (REEs), including 14 lanthanoids, scandium (Sc), and yttrium (Y), in groundwater around a large coal-fired thermal power plant (TPP). The ICP-MS technique was used to analyze 16 REEs in groundwater samples collected from monitoring wells. REE concentrations ranged from 59.9 to 758 ng/L, with an average of 290 ng/L. The most abundant was Sc, followed by La, accounting for 54.2% and 21.4% of the total REE concentration, respectively. Geospatial analysis revealed the REE enrichment at several hotspots near the TPP. The highest REE concentrations were observed near the TPP and ash landfill, decreasing with the distance from the plant and the landfill. REE fractionation ratios and anomalies suggested the Light REE dominance, comprising over 78% of the total REEs. Correlation and principal component analyses indicated similar behavior and sources for most REEs. Health risk assessment found hazard indices (HI) of 1.36 × 10-3 and 1.98 × 10-3 for adults and children, respectively, which are far below the permissible limit (HI = 1). Likewise, incremental lifetime cancer risks (ILCR) were all below 1 × 10-6. Nevertheless, ongoing ash disposal and potential accumulation in the environment could elevate the REE exposure over time.

Analysis of enrichment, correlation, and leaching patterns of rare earth elements in coal fly ash assisted by statistical measures

Coal fly ash (CFA) is a typical industrial solid waste, which has recently been reported to contain rare earth elements (REEs). REEs are important materials in many industrial fields. Therefore, extracting REEs from CFA becomes a win-win strategy to both make full use of CFA and reclaim REEs. However, the stable crystalline structure of CFA is hard to break, which limits the extraction of REEs. The inter-correlation and the leaching patterns of the REEs in CFA also remain unclear. In this work, REEs were enriched by desilication, and the correlation and the influences of multiple acids of the leached REEs were investigated. It was found that desilication could increase the leachable amount of REEs from 137.37 ppm to 346.12 ppm. The light rare earth elements (LREEs) were less inter-correlated than heavy rare earth elements (HREEs) and desilication enhanced the leaching of LREEs more than that of HREEs. The ratio and type of the leaching acids both influenced the extraction of REEs from CFA: HCl and HF played important roles in the extraction from the untreated CFA while HNO3 and HF were more decisive for the desilicated CFA. In addition, we used statistical analysis to quantificationally confirm that desilication and acids both significantly influenced the extraction of REEs. This work provides evidence for the enrichment of REEs in CFA and acid choosing when leaching REEs from CFA.

Geochemical characteristics of the Rajmahal coals in Dhulia North Block, Eastern India: implication to their utilization and environment

The borehole coal samples of Dhulia North Block from the Rajmahal Basin, Eastern India, were systematically analyzed based on the chemical composition and concentration of major and trace elements (including rare earth elements, REEs) to assess the distribution of REEs and their environmental implications with utilization potential. The Dhulia North Block coals are characterized by the predominant major oxides of SiO2, Al2O3, and Fe2O3, accounting for 94% of the total ash composition, indicating the presence of quartz, clay-rich minerals, and pyrite. Compared with the average world coal ash, the total REE content in the analyzed samples ranged from 341.0 to 810.4 ppm, which is substantially higher. Hot humid climate conditions with intermediate igneous source rocks of the basin were demonstrated by the major oxide ratios (Al2O3/TiO2 < 20) and plots of TiO2 with Al2O3 and Zr. The redox-sensitive elements such as V, Ni, Cr, and Co found in the Dhulia North Block coal indicate that an oxic sedimentary environment existed in the basin when coal was formed. The low sulfur content (1% in most samples) indicates freshwater conditions in the basin at the time of organic matter deposition. The outlook coefficient (Coutl) varies between 0.7 and 1.6, indicating that the Dhulia North Block coals are a prospective source of REEs. The Dhulia North Block coals are characterized by low H/C and O/C atomic ratios ranging from 0.56 to 0.90 and 0.10 to 0.22, respectively, and contain type-III kerogens, indicating gas-prone source rock. Further, the basic-to-acid oxide ratio suggested that Dhulia North Block coals were suitable for utilization during combustion processes.

Rare earth elements in soil around coal mining and utilization: Contamination, characteristics, and effect of soil physicochemical properties

REEs are emerging contaminants, and soils nearby coal and coal ash with high REEs composition are vulnerable to REEs contamination. Besides, coal industry alters surrounding soil characteristics. However, there is information paucity about REEs contamination and geochemical behaviors along with soil characteristics around coal industrial areas, which are essential for understanding their toxicity and mobilization. The study was conducted in soils surrounding Kriel coal-fired power plant (KCM) and Greenside coal mining in Witbank (GSCM), South Africa. Multivariate statistical analysis, pollution and fractionation indices, and BCR sequential extraction were applied. The ∑REEs in the soils were compared to abundance of ∑REEs in the upper earth's crust (UEC), and slightly higher ∑REEs were found in KCM but slightly lower in GSCM. Generally, LREEs are abundant. The REEs in the soils were normalized using the Post-Archean Australian Shale (PAAS) and then Eu and Gd in KCM and Gd in GSCM were >1. Contamination assessment revealed slightly to moderately contaminated soils by REEs. ∑REEs in KCM was significantly correlated with soil particle sizes of 2.00-50.00 μm, Al₂O₃, Fe₂O₃, and MnO, while with 2.00-3.00 μm and Al₂O₃ in GSCM. Fractionation characteristics showed a positive Ce anomaly with positive linear regressions with Fe₂O₃ and MnO. In contrast, a negative Eu anomaly was found with positive linear regressions with Al, Ca, and Mg-oxides. Oxidizable fractioned REEs accounted for 32.33% of the ∑REEs in GSCM and 35.85% in KCM, and their high EF suggest enrichment that could be due to coal mining and utilization. Most soil physicochemical properties appear to be negatively correlated with the exchangeable REEs. Overall, the soils are contaminated by REEs, and characteristics of the REEs are considerably influenced by the major elements oxide, U, and Th contents. Therefore, more attention should be paid to REEs contamination and impacts around coal mining and utilization.

Green Approach for Rare Earth Element (REE) Recovery from Coal Fly Ash

Due to the growing demands of rare earth elements (REEs) and the vulnerability of REEs to potential supply disruption, there have been increasing interests in recovering REEs from waste streams such as coal fly ash (CFA). Meanwhile, CFA as a large industrial waste stream in the United States (U.S.) poses significant environmental and economic burdens. Recovery of REEs from CFA is a promising solution to the REE scarcity issue and also brings opportunities for CFA management. This study demonstrates a green system for REE recovery from Class F and C CFA that consists of three modules: REE leaching using citrate, REE separation and concentration using oxalate, and zeolite synthesis using secondary wastes from Modules I and II. In Module I, ∼10 and 60% REEs were leached from the Class F and C CFA samples, respectively, using citrate at pH 4. In Module II, the addition of oxalate selectively precipitated and concentrated REEs from the leachate via the formation of weddellite (CaC₂O₄·2H₂O), while other trace metals remained in solution. In Module III, zeolite was synthesized using wastes from Modules I and II. This study is characterized by the successful recovery of REEs and upcycling of secondary wastes, which addresses both REE recovery and CFA management challenges.

Investigation of water treatment sludge for the treatment of saline water: Batch studies

In this study, water treatment sludge was investigated through batch modes for the treatment of saline water to meet livestock drinking consents. The water quality was assessed using water quality index (WQI).The kinetic data was best described by the Pseudo - Second - Order model and the equilibrium isotherm by the Freundlich model. The maximum removal efficiency was 51.5 ± 0.65%, 22.6 ± 0.5% and 100% for Sulphates (SO4 2-), Chloride (Cl-), and Nitrates (NO3 -), respectively. The maximum removal efficiency of sodium (Na) and nickel (Ni) was 100% each at 0.4g dose and that of manganese (Mn) was 87.5% at 1.2g dose. The effect of temperature revealed that the adsorption capacity for anions, decreased with increasing temperature, whereas for the cations the adsorption capacities increased with increasing temperature. The water treatment sludge reduced the total dissolved solids (TDS) and electrical conductivity (EC) from the initial values of 19600 mgL-1 and 38900 μScm-1 to 98 mgL-1 and 1728 μScm-1,respectively. The Water Quality Indices were 37.35 and 7.57, before and after treatment, respectively. Water treatment sludge can be used for the pre-treatment process before using conventional treatment technologies. Pilot scale investigations should be conducted before field trials.

Zeolite Composite Materials from Fly Ash: An Assessment of Physicochemical and Adsorption Properties

Waste fly ash, with both low (with the addition of vermiculite) and high contents of unburned coal, were subjected to hydrothermal syntheses aiming to obtain zeolite composite materials-zeolite + vermiculite (NaX-Ver) and zeolite + unburned carbon (NaX-C). The composites were compared with parent zeolite obtained from waste fly ash with a low content of unburned carbon (NaX-FA). In this study, the physicochemical characteristics of the obtained materials were evaluated. The potential application of the investigated zeolites for the adsorption of ammonium ions from aqueous solutions was determined. Composite NaX-Ver and parent zeolite NaX-FA were characterized by comparable adsorption capacities toward ammonium ions of 38.46 and 40.00 mg (NH₄⁺) g^-1, respectively. The nearly 2-fold lower adsorption capacity of composite NaX-C (21.05 mg (NH₄⁺) g^-1) was probably a result of the lower availability of ion exchange sites within the material. Adsorbents were also regenerated using 1 M NaCl solution at a pH of 10 and subjected to 3 cycles of adsorption-desorption experiments, which proved only a small reduction in adsorption properties. This study follows the current trend of waste utilization (fly ash) and the removal of pollutants from aqueous solutions with respect to their reuse, which remains in line with the goals of the circular economy.

Scandium, yttrium, and lanthanide occurrence in Cantharellus cibarius and C. minor mushrooms

There is a dearth of data on rare earth elements (REE), yttrium and scandium in foods which extends also to baseline datasets for edible wild mushrooms, though this has started to change in the last decade. Concentrations and shale normalized patterns of REE and Y (REY) were studied by using inductively coupled plasma-quadrupole mass spectrometer in 22 pools (2235 specimens) of Cantharellus cibarius (Golden Chanterelle) collected in Poland and also a pool of C. minor (Small Chanterelle) (153 specimens) from Yunnan (Chinese Province). The total REY plus Sc varied in C. cibarius from 10 to 593 µg kg-1 dw whereas that for the Yunnan's C. minor was 2072 µg kg-1 dw. C. minor from Yunnan has higher REY and Sc compared to the C. cibarius. Sc concentrations in twenty C. cibarius pools were below 1 µg kg-1 dw, but 17 and 27 µg kg-1 dw were detected at the other two sites and 66 µg kg-1 dw was detected in C. minor. The median Y content of C. cibarius and C. minor was 22 µg kg-1 dw and 200 µg kg-1 dw. The difference in REY and Sc concentrations and shale normalized patterns between mushrooms from Poland and Yunnan seems to reflect the regional difference in concentration and composition of these elements in the soil bedrock.

A critical review on mechanochemical processing of fly ash and fly ash-derived materials

Fly ash (FA) is a solid, fine powder that constitutes a by-product obtained when coal, biomass, municipal solid waste or a mixture of these are combusted. This review article focuses on the mechanochemistry of coal fly ash (CFA), as well as highlights the issue of fly ash from municipal solid waste (MSW). In general, FA is regarded as a waste of public concern (since it contains hazardous components), which is primarily consumed in the construction industry, as well as in chemical synthesis and environmental engineering. However, the actual amount of FA recycled is still less than the amount produced, with the reuse rate of only up to 30 %. Due to its relatively low reactivity and heterogeneity, FA is commonly landfilled in huge quantities. Nevertheless, the physical and chemical properties of FA can be tailored, for example, by mechanical forces, ultimately leading to a higher value-added product. Currently, mechanochemistry (MC) is drawing attention in chemical synthesis, pollution remediation and waste management, especially as a possible solution for various drawbacks of conventional syntheses and processes. Mechanochemical processing of FA can be considered eco-friendly, inexpensive and efficient, in particular for processing tons of readily available fly ash already stored in ponds or landfills. With the aim of highlighting the hidden potential and facilitating the favorable use of FA, this article deals with FA as an environmentally challenging material, FA reactivity and recycling through mechanochemical processing, mechanochemical stabilization of heavy metals in FA, as well as up-to-date challenges for life cycle assessment (LCA) in evaluating FA-derived materials. Furthermore, all these full-potential aspects of FA mechanochemistry have not been addressed before, which is a valuable contribution to the existing literature.

Challenges and opportunities for sustainable valorization of rare earth metals from anthropogenic waste

Progressively and projected integration of rare earth metals (REMs) in modern technologies, especially in the clean energy, consumer electronics, aerospace, automotive, and defense sectors, place REMs as critical raw materials in the supply chain and strategic metal from the fourth industrial revolution perspective. Current REM production from the primary mineral resources in the supply chain versus industrial demand is at a bottleneck. Alternatively, REM-bearing anthropogenic wastes are pertinent and potent to addressing the critical supply chain bottleneck. Although secondary REM resources are prudent to address the critical supply chain bottleneck, the absence of effective and efficient technologies to recover these REMs from anthropogenic waste imposes challenges and provides opportunities. Hence, this review analyses and discusses the significance of anthropogenic wastes for REM recovery, the status of recycling technologies for sustainable valorization of REMs, challenges, and opportunities. The current review covers the potential quantitative REM wealth locked in various anthropogenic waste like (i) spent rare earth permanent magnets, (ii) spent batteries, (iii) spent tri-band REM phosphors, (iv) bauxite industry residue red mud, (v) blast furnace slag and (v) coal mines, and coal byproducts and status of valorization technologies for circularizing the REMs. In industrial waste like red mud, steelmaking slag, blast furnace slag, and coal fly ash typically 109,000, 2000, 39,000, and 354,000 tons of REM get scrapped, respectively, in a conservative estimation. In the years 2020 and 2021, respectively, 240,000 and 280,000 tons of REM were produced by mine production in contrast to 504,000 tons of REM that were scrapped with REM-bearing industrial waste. This review revealed that total REM currently getting scrapped with anthropogenic waste versus projected REM demand for the years 2022, 2023, 2024, and 2025 could be standing at 2.66, 2.51, 2.37, and 2.23, respectively. Our investigation revealed that efficient recovery of REMs from anthropogenic waste is significant and promising but associated with challenges like lack of industrial-scale valorization process, lack of a clear strategy, road map, policy, effort, funding, and diversified research.

Occurrence, bio-concentration and distribution of rare earth elements in wild mushrooms

Using validated methodology, this study explores the bioconcentration potential and status of rare earth elements (REE) and yttrium (Y) in wild mushrooms collected from Belarus, China and Poland and in the associated forest topsoil. Baseline data for REE and Y distributions in the morphological parts of the fruiting bodies of Caloboletus calopus, Cantharellus cibarius, Craterellus cornucopioides, Imleria badia, Laccaria amethystina, Lactifluus piperatus, Leccinum scabrum and Suillus grevillei are presented. REE were in the range of 14 to 42 mg kg^-1 dw in forest topsoil and from 35 to 48 mg kg^-1 dw in profiled soil layers from the Sobowidz site in Poland. Forest topsoil sampled in Belarus contained 67 mg kg^-1 dw. Yttrium concentrations in soil ranged from 2.9 to 10 mg kg^-1 dw. The median REE concentration in wild mushrooms was around 200 μg kg^-1 dw (20 μg kg^-1 fresh weight). This implies negligible dietary intake even for high level consumers. The bioconcentration factors (BCF) of individual REE and Y ranged from 0.0002 to 0.0229, showing bio-exclusion. The BCF tended to be similar for groups of REE (La to Tb and Dy to Lu) depending on the mushroom species and site. REE from Dy to Lu were better bioconcentrated than those from La to Tb. The similarity of the BCFs of individual REE by species at a given site implies the same absorption pathway, although a lower concentration in the topsoil favoured bioconcentration. REE and Y concentrations varied between species as well as within the same species between sites. Their accumulation in mushrooms appears to reflect condition at the site of collection, and may also be species-specific but confirming this would require further investigation of different species, topsoils and sites.

Abundance, spatial variation, and sources of rare earth elements in soils around ion-adsorbed rare earth mining areas

Rare earth elements (REEs) concentrated in soils have attracted increasing attention about their impact on soil health as emerging contaminants. However, the sources of REEs enriched in soils are diverse and need to be further investigated. Here, surface soil samples were collected from southern Jiangxi Province, China. REEs contents and soil physicochemical properties were determined, and cerium (Ce) and europium (Eu) anomalies were calculated. Moreover, we established a model to further identify the main sources of REEs accumulation in the studied soils. Results show that the abundance of soil REEs reveals larger spatial variation, suggesting spatially heterogeneous distribution of REEs. The median content of light REEs in soils (154.5 mg kg^-1) of the study area was higher than that of heavy REEs and yttrium (35.8 mg kg^-1). In addition, most of the soil samples present negative Ce anomalies and all the soil samples present negative Eu anomalies implying the combined effect of weathering and potential exogenous inputs on soil REEs. Positive matrix factorization modeling reveals that soil REEs content is primarily influenced by soil parent materials. Potential anthropogenic sources include mining-related leachate, traffic exhaust, and industrial dust. These results demonstrate that the identification of sources of soil REEs is an important starting point for targeted REEs sources management and regulation of excessive and potentially harmful REEs levels in the soil.

Geochemical, mineralogical and toxicological characteristics of coal fly ash and its environmental impacts

Coal and coal-based products (by-products), along with other fossil fuels should be used with caution because of their impact on human health and the global climate. In the light of the environmental impact these fossil fuels cause, it's essential to understand the elemental configuration of coal-derived samples and their impact on the ecosystem. Some reports in past have described, geochemical and mineralogical physiognomies of fly-ash and their impact on the environment. However, a comprehensive investigation of various aspects of fly ash like geochemistry, mineralogy, morphology, and toxicological effects has been very sparse and the present study reports the above aspects. The ICP-OES studies confirm the presence of various elements (Al, Ca, Fe, Mg, Na, P, S, Si, and Ti) in the samples. The XRD analysis exposed the presence of minerals like Quartz, H-Hematite, Anatase, Muscovite, and Rutile, in addition to the various phases such as amorphous and crystalline in the fly-ash. Specific samples also possessed Ilmenite which is uncommon in many other samples. Chromium and lead, the well-known heavy metals to cause soil and water pollution in the neighbourhood were found to be existing in higher concentrations in the fly-ash samples, whereas cadmium was found to be the least among the toxic elements found in the samples. The samples were subjected to FE-SEM analysis, which reveals the presence of irregularly shaped minerals and unburnt carbon known to reduce the burning efficiency of coal, especially in power plants. Toxicology studies reported in the work suggested that fly-ash is toxic to the environment at higher concentrations than at lower concentrations.

Rare Earth Elements in Boletus edulis (King Bolete) Mushrooms from Lowland and Montane Areas in Poland

Mining/exploitation and commercial applications of the rare-earth elements (REEs: La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu) in the past 3 decades have raised concerns about their emissions to the environment, possible accumulation in food webs, and occupational/environmental health effects. The occurrence and distribution of REEs Y and Sc in the fruitbodies of Boletus edulis collected from geographically diverse regions in Poland were studied in 14 composite samples that were derived from 261 whole fruiting bodies. Individual REE median concentrations ranged from 0.4-95 µg kg-1 dry weight (dw). The summed REE concentrations varied widely, with a median value of 310 µg kg-1 dw and a range of 87 to 758 µg kg-1. The Sc and Y median concentrations (dw) were 35 and 42 µg kg-1, respectively. Ce, La, and Nd, with median values of 95, 51, and 32 µg kg-1, respectively, showed the highest occurrence. B. edulis collected from a forested area formerly used as a military shooting range-possibly a historically contaminated site-had an elevated summed REE content of 1796 µg kg-1. REE concentrations were generally low in Polish King Bolete. Dietary intake from a mushroom meal was negligible, posing no health risk to consumers.

Enrichment and occurrence form of rare earth elements during coal and coal gangue combustion

Coal ash has emerged as an important alternative source for rare earth elements (REEs). The enrichment and occurrence form of REEs among coal combustion products are of great significance for both technical design and economic evaluation of recovering REEs from the coal ash. Here, the enrichment and occurrence form of REEs in the ash were investigated. Compared with ashes from muffle furnace, coal fly ash (CFA) from power plants involved higher enrichment ratio of REEs, which was explained by the fractionation of coal ashes to concentrate REEs in finer CFA, higher combustion temperature to vaporize more volatile elements, and longer residence time of fly ash to absorb REEs in the gas. In addition, CFA samples were analyzed by sequence chemical extraction procedure (SCEP) and scanning electron microscope with an energy dispersive spectrometer (SEM-EDX), which revealed the important role of aluminum in the occurrence form of REEs compared with Si in aluminosilicates of CFA. This conclusion was further confirmed by thermodynamic equilibrium calculation, which also agreed qualitatively with the observation that REEs mainly existed in the solid phase. Both experimental and computational results of this work provided insights to understand the distribution of REEs in CFA and optimize their extraction processes.

Optimization of Iron Removal in the Recovery of Rare-Earth Elements from Coal Fly Ash Using a Recyclable Ionic Liquid

Rare-earth elements (REEs) are essential for modern technologies, and the United States currently lacks a secure domestic supply. Coal combustion residuals, specifically coal fly ash (CFA), can be a potential source. Our previous work demonstrated that REEs could be preferentially extracted from CFA using the ionic liquid (IL) betainium bis(trifluoromethylsulfonyl)imide ([Hbet][Tf₂N]), and the process yielded a mildly acidic REE-rich solution with coextracted Fe and regenerated IL. In this study, we investigated three strategies to limit Fe coextraction: magnetic separation, complexing salts, and ascorbic acid (AA) reduction. Magnetic separation of CFA was ineffective in significantly lowering the Fe content in the IL phase. When NaCl was used instead of NaNO₃ during extraction, chloride complexation lowered iron distribution to the IL phase over the aqueous phase (D_Fe) by five folds, from ∼75 to ∼14, while REE leaching (L_REEs) and recovery (R_REEs) both increased. Using AA for iron reduction lowered the overall amount of Fe extracted and further decreased D_Fe to ∼0.16, effectively shifting Fe preference from the IL phase to the aqueous phase. Combining the strategies of NaCl, AA, and supplemental betaine addition, leaching and extraction of REEs from CFA by [Hbet][Tf₂N] were achieved in higher efficiency for REE recovery with minimized Fe concentration.

Integrative Study Assessing Space and Time Variations with Emphasis on Rare Earth Element (REE) Distribution and Their Potential on Ashes from Commercial (Colombian) Coal

The increasing demand for rare earth elements (REEs), which is associated with their economic importance and the supply risk, has motivated the research for alternative secondary sources of these elements. Coal and coal combustion ash have been pointed out as promising REE raw materials. This research seeks to understand REE fractionation, from feed coals to ashes, considering seasonal variations, and to assess the trends within the ash fractions that can be used for further beneficiation processes. Colombian commercial feed coals, combustion ashes, and their respective fractions were sampled from a Portuguese power plant and were characterized via petrographical, mineralogical, and chemical analyses. The total REE concentrations in the feed coals studied range between 6.97 and 23.15 ppm, while, in the ashes, they vary from 159.9 to 266.6 ppm. Fly ash (FA) from electrostatic precipitator (ESP) presented higher concentrations than the bottom (BA) and economizer (ECO) ashes. Furthermore, REEs and the LREE/HREE ratio increased slightly towards the back rows of the ESP. In the feed coals, the REEs are significantly correlated with ash, and they occur in micrometric phosphate minerals intermixed with clays. In the ashes, the REEs were mostly detected in micrometric particles, with P and Al-Si as the major components. The results from the fractioned samples show that the REEs were enriched in the fine (<25 µm) and nonmagnetic fractions of the ESP FA. A single trial combining sieving and magnetic separation enabled the attainment of a REE recovery of 53%, and a final enrichment factor of 1.25. Coal combustion ashes and their respective size fractions are promising REE raw materials; however, the REE oxide concentrations are below the economical cutoff of 1000 ppm.

Remediation of Azure A Dye from Aqueous Solution by Using Surface-Modified Coal Fly Ash Extracted Ferrospheres by Mineral Acids and Toxicity Assessment

The Indian coal fly ash (CFA) is composed of 5-15% ferrous fractions. The variation in percentage depends on the source of coal and the operating conditions of the thermal power plants. The present research work reports the recovery of ferrous particles from CFA by the wet magnetic separation method. The morphological, elemental, and chemical properties of the extracted ferrous fractions were analyzed. In order to achieve surface-modified ferrospheres, the extracted ferrospheres were treated with concentrated HCl followed by sonication. The instrumental analysis reported the ferrous composition is around 16% by weight and belongs to class F. The toxicity of CFA was determined on normal human lung (BEAS-2B) cells using MTS assay. The results showed that CFA’s induced cell toxicity in a dose-dependent manner. The ferrous particles were spherically shaped with various sizes ranging from 200 nm to 7000 nm. It was crystalline in nature and is a mixture of hematite and magnetite. The particles were found to be associated with alumina, silica, oxygen, and traces of Ca, Mg, Ti, and C. The surface-modified ferrospheres were used for the remediation of Azure A dye by batch adsorption study. The removal percentage of dye was 25.03%, within 30 minutes at neutral pH, i.e., 7.2. The surface-modified ferrospheres show potential as an alternate, more economical, and reusable adsorbent for the remediation of Azure A dye in the industries or in common effluent treatment plants. Moreover, the recovery of surface-modified ferrospheres using an external magnet and the reuse of the particles make the material much economical for dye removal at an industrial scale.

Impact of Soil Inoculation with Bacillus amyloliquefaciens FZB42 on the Phytoaccumulation of Germanium, Rare Earth Elements, and Potentially Toxic Elements

Bioaugmentation promises benefits for agricultural production as well as for remediation and phytomining approaches. Thus, this study investigated the effect of soil inoculation with the commercially available product RhizoVital^®42, which contains Bacillus amyloliquefaciens FZB42, on nutrient uptake and plant biomass production as well as on the phytoaccumulation of potentially toxic elements, germanium, and rare earth elements (REEs). Zea mays and Fagopyrum esculentum were selected as model plants, and after harvest, the element uptake was compared between plants grown on inoculated versus reference soil. The results indicate an enrichment of B. amyloliquefaciens in inoculated soils as well as no significant impact on the inherent bacterial community composition. For F. esculentum, inoculation increased the accumulation of most nutrients and As, Cu, Pb, Co, and REEs (significant for Ca, Cu, and Co with 40%, 2042%, and 383%, respectively), while it slightly decreased the uptake of Ge, Cr, and Fe. For Z. mays, soil inoculation decreased the accumulation of Cr, Pb, Co, Ge, and REEs (significant for Co with 57%) but showed an insignificant increased uptake of Cu, As, and nutrient elements. Summarily, the results suggest that bioaugmentation with B. amyloliquefaciens is safe and has the potential to enhance/reduce the phytoaccumulation of some elements and the effects of inoculation are plant specific.

A review on mineralogical speciation, global occurrence and distribution of rare earths and Yttrium (REY) in coal ash

Abstract

Rare earths and Yttrium (REY) are a group of critical metals essential for this electronic and digital era. China is the leading producer of REY with more than 90% of global export. Mines of REY are limited and the need for green and efficient energies have augmented the demand of REY and it is putting enormous pressure on global production. REY market is predicted to grow from USD 5.3 billion in 2021 to 9.6 billion by 2026, at a CAGR (Compound Annual Growth Rate) of 12.3%. The need for permanent magnets is propelling the demand of the critical group REY and is expected to rise gradually in the coming years. In the present review, we have summarized the minable REY resources and their applications. The requirement for alternative resource is pivotal to meet our future needs. We have extensively reviewed the studies of REY in coal fly ash (CFA). A comprehensive analysis has been done for the REY resources worldwide for the last several decades in coal ash (CFA and bottom ash) and divulged into the application, speciation and distribution for major coal-consuming countries like China, India, USA, Russia, UK, Poland, etc., individually. We have also made a comparative global study and inferred potential extractable coal ash resources using various parameters such as global average, critical percentage (C_p), outlook coefficient (C_out), etc., for a better understanding of economic exploitation.

Research highlights

We have put up enormous effort to synthesize rare earth elemental data of coal ash from different coal-consuming countries. Following are the major highlights of this review article.

We have compiled data on occurrence of Rare Earths and Yttrium (REY) in coal ash from 13 countries such as China, India, USA, UK, Poland, etc.

Up-to-date global data of mined REY resources and reserves have been compiled.

Broad characterization and classifications of REY have been introduced.

Comprehensive analysis of application, speciation and environmental impact of REY in coal ash have also been compiled.

Comparative study has been done using parameters such as global average, critical percentage, outlook coefficient, etc. These parameters would help in determining ideal candidates for beneficial extraction of REY.

This study would serve as a knowledge resource centre for new research related to REY.

Fast Screening of Coal Fly Ash with Potential for Rare Earth Element Recovery by Electron Paramagnetic Resonance Spectroscopy

Rare earth elements (REYs) are in increasing global demand, but their mining is costly and environmentally destructive. Coal fly ash (CFA) is a promising alternative source of REYs, but it is necessary to identify CFA with sufficiently high REY concentrations. This study proposes the use of electron paramagnetic resonance (EPR) spectroscopy as part of a simple method to identify CFAs with adequate REY concentrations. The EPR spectra of CFA samples taken from 186 Chinese commercial coal-fired power plants were analyzed. The results suggest that CFAs without evident 6-fold resonances are worth recycling (REY concentrations of 416 ± 108 mg/kg), while those with conspicuous 6-fold resonances are not worth recycling (REY concentrations of 55 ± 26 mg/kg). This is probably due to isomorphic substitution of Ca(II) for Mn(II) and REY(III), resulting in low concentrations of Mn(II) and REY(III) in Ca-rich CFAs. This EPR evaluation method does not require specialized sample preparation, professional skills, or secondary data analysis and has potential global significance in the fast screening of CFAs with REY-recycling potential.

Selected Critical Raw Materials in Waste from Coal Gasification in Poland

In an effort to identify new sources of critical raw materials (CRMs) possibility of recovering selected CRMs from Polish coals, chars, and ashes resulting from the combustion of coals and chars was investigated. The samples were collected from pilot fluidized bed gasification systems. The search for CRMs in coal gasification wastes has not been widely reported before. The study used 2 bituminous coal and 1 lignite sample; the concentration of individual critical raw materials (CRMs) was analyzed using the ICP-MS method. The obtained results were compared with Clarke values in coal ash and in the Earth’s crust, and with the adopted cut-off grade. As shown by the analysis, the highest concentrations of CRMs can be found in fly ash, mainly in samples from the eastern part of the Upper Silesian Coal Basin. This applies mostly to Be, Cs, or Sb due to the fact that their concentrations were found to be higher than the Clarke value in the Earth’s crust; the mentioned fly ashes could be used as potential sources of critical elements if appropriate recovery technologies are developed. In addition, the tested materials have elevated Se, Pb, Ni concentrations, but their recovery is currently not economically viable. Compared to the currently adopted cut-off grade levels, there are no critical elements in the analyzed coal gasification waste that could be recovered.

Toward the Circular Economy of Rare Earth Elements: A Review of Abundance, Extraction, Applications, and Environmental Impacts

Rare earth elements (REEs) are increasingly critical to the high-technology and low-carbon economy. With a shift to sustainable socioeconomic development that aims to be less fossil fuel dependent, global demand for REEs continues to rise, despite their uncertain supply chain and high environmental impact of production. Here, we review recent research on REEs, including global reserve assessment, REE-based applications, major REE production pathways, environmental impacts, and the potential to leverage circular economies within the REE industry. The main objective of this review is to provide an overall socioeconomic and environmental perspective of the REE industry with a central focus on environmental impacts of various REE-related activities. The literature reveals significant interest in extracting REEs from secondary materials (e.g., tailings, bauxite residues, coal combustion ash) and electronic wastes. However, some of these REE recovery processes are not yet economically profitable and environmental-friendly. Continued technological advancements and increasing demands for REEs may entice countries with recently discovered REE reserves to break the current monopolistic REE supply chain. Furthermore, the sustainability of REE usage may also depend on consumer awareness of environmental and human health impacts associated with end-of-life electronics that contain REEs. On the other hand, REEs may show promise in sustainable agriculture and environmental applications. Nevertheless, further research on REE ecotoxicological impacts is required to establish environmental regulations that protect the environment and human health.

Methods of Ensuring Energy Security with the Use of Hard Coal—The Case of Poland

In this article, the authors present methods based on hard coal that may ensure energy security for European Union countries. The research was carried out based on the example of Poland. The main reason for which coal is being gradually withdrawn from the energy mixes in EU countries is its negative impact on the natural environment and the health of citizens and economic factors related to domestic fuel production. The authors propose the creation of energy–chemical clusters as a solution to these problems. It is assumed that the clusters would operate following the principles of the circular economy. We also propose methods for the optimization of the production and transport costs within the cluster. Then, we conduct profitability analysis of the proposed waste management methods. At the level of the designated cluster, using network algorithms enabled us to reduce the transport costs by at least 50%. It is possible to obtain rare earth elements (REEs) worth USD 22,970 from 1 Mg of ash. At the level of the analyzed cluster, this leads to an annual profit of USD 3.5 billion. The profit related to algae production at the cluster level is approximately USD 2.5 bn.

Spatial distribution of multielements including lanthanides in sediments of Iron Gate I Reservoir in the Danube River

Recent studies show that lanthanides (Ln) are becoming emerging pollutants due to their wide application in new technologies, but their environmental fate, transport, and possible accumulation are still relatively unknown. This study aims to determine major and trace elements including Ln in the Danube River sediment which either belong or close to the Iron Gate Reservoir. The Iron Gate Reservoir is characterized by accumulation of sediments as an effect of building hydropower dam Iron Gate I. The surface sediments were collected on the Danube River-1141 to 864 km and three tributaries along this waterway. Two samples of deep sediments were used for comparison. The results indicate the significant upward enrichment of Zn, Sb, Cr, Nd, and Dy in sediments belongs to the Iron Gate Reservoir. The sample 4-Smed is labelled as a hot spot of contamination with Zn, Cr, As, Sb, Nd, and Dy. Also, a trend of increasing concentration in the time period from 1995 to 2016 was found for elements Zn, Cr, and Ni in sediment samples in the Iron Gate Reservoir. Chemometric analysis shows the grouping of sample sites into clusters characterized by the following properties: (i) increased concentration of all measured elements (samples within the Iron Gate Reservoir); (ii) increased Cu concentration (11-Pek); and (iii) lower concentrations of the measured elements (deep sediments). The data presented hereby contribute to the monitoring of pollution of the River Danube sediments and give the first view of Ln profile in the studied sediments.

The Behaviour of Rare Earth Elements from South African Coal Fly Ash during Enrichment Processes: Wet, Magnetic Separation and Zeolitisation

Rare earth elements (REEs) are essential raw materials in a variety of industries including clean energy technologies such as electric vehicles and wind turbines. This places an ever-increasing demand on global rare earth element production. Coal fly ash (CFA) possesses appreciable levels of REEs. CFA, a waste by-product of coal combustion, is therefore a readily available source of REEs that does not require mining. CFA valorisation to zeolites has been achieved via various synthesis pathways. This study aimed to evaluate one such pathway by monitoring how REEs partition during CFA processing by the wet, magnetic separation process and zeolitisation. South African CFA was subjected to wet, magnetic separation and subsequent zeolitisation of the nonmagnetic fraction (NMF); solid products were characterised by XRD, SEM, XRF and LA-ICP-MS. The wet, magnetic separation process resulted in the partitioning of a specific set of transition metals (such as Fe, Mn, Cr, V, Ni, Zn, Cu, Co and Mo) into the magnetic fraction (MF) of CFA, while REEs partitioned into the NMF with a total REE content of 530.2 ppm; thus, the matrix elements of CFA were extracted with ease. Zeolitisation resulted in a solid zeolite product (hydroxysodalite) with a total REE content of 537.6 ppm. The process of zeolitisation also resulted in the selective enrichment of Ce (259.1 ppm) into the solid zeolite product (hydroxysodalite), while other REEs were largely partitioned into the liquid phase. CFA valorisation by wet, magnetic separation and zeolitisation therefore allowed for the partitioning of REEs into various extraction products while recovering the matrix elements of CFA such as Fe, Si and Al. The findings of this study highlight the geopolitical importance of REEs in terms of the development of alternative processes for REE recovery from waste and alternative sources, which may potentially give countries that employ and develop the technology a key advantage in the production of REEs for the global market.

Geochemical Occurrence of Rare Earth Elements in Mining Waste and Mine Water: A Review

Μining waste, processing by-products and mine water discharges pose a serious threat to the environment as in many cases they contain high concentrations of toxic substances. However, they may also be valuable resources. The main target of the current review is the comparative study of the occurrence of rare earth elements (REE) in mining waste and mine water discharges produced from the exploitation of coal, bauxite, phosphate rock and other ore deposits. Coal combustion ashes, bauxite residue and phosphogypsum present high percentages of critical REEs (up to 41% of the total REE content) with ΣREY content ranging from 77 to 1957.7 ppm. The total REE concentrations in mine discharges from different coal and ore mining areas around the globe are also characterised by a high range of concentrations from 0.25 to 9.8 ppm and from 1.6 to 24.8 ppm, respectively. Acid mine discharges and their associated natural and treatment precipitates seem to be also promising sources of REE if their extraction is coupled with the simultaneous removal of toxic pollutants.

Combustion wastes from thermal power stations and household stoves: A comparison of properties, mineralogical and chemical composition, and element mobilization by water and fertilizers

Wood and coal combustion generate wastes, which may negatively influence the environment. However, studies concerning coal combustion products serving as soil additives are currently in progress. Hence, this study was conducted to compare properties (mineralogy, metallic element content, and rare earth element content) of combustion wastes of different genesis (ash and soot after wood and coal combustion in households, ash from thermal power stations) and to assess possible risk posed to the soil environment when used as soil additive. This study demonstrated the diversity of chemical and mineralogical features of ashes of household genesis originating from thermal power stations. Ash from household stoves showed a higher concentration of metallic elements (i.e., Zn) compared to those originating from thermal power stations. Antimony (Sb) content in household ash can serve as an indicator of plastic (polyethylene) combustion, which is legally prohibited. Leaching tests using water and common mineral fertilizers showed that ammonium sulfate mobilizes metallic elements (Cu, Zn, Pb) more significantly than potassium nitrate or deionized water. The leaching of metallic elements from household stove's ash certainly excludes the possibility of applying the ash as a soil additive even when the ash contains a source of beneficial elements for plants (i.e., Ca).

Preferential Recovery of Rare-Earth Elements from Coal Fly Ash Using a Recyclable Ionic Liquid

Recent global geopolitical tensions have exacerbated the scarcity of rare-earth elements (REEs), which are critical across many industries. REE-rich coal fly ash (CFA), a coal combustion residual, has been proposed as a potential source. Conventional REE-CFA recovery methods are energy- and material-intensive and leach elements indiscriminately. This study has developed a new valorization process based on the ionic liquid (IL) betainium bis(trifluoromethylsulfonyl)imide ([Hbet][Tf₂N]) for preferential extraction of REEs from different CFAs. Efficient extraction relies on [Hbet][Tf₂N]'s thermomorphic behavior with water: upon heating, water and the IL form a single liquid phase, and REEs are leached from CFA via a proton-exchange mechanism. Upon cooling, the water and IL separate, and leached elements partition between the two phases. REEs were preferentially extracted over bulk elements from CFAs into the IL phase and then recovered in a subsequent mild-acid stripping step, regenerating the IL. Alkaline pretreatment significantly improved REE leaching efficiency from recalcitrant Class-F CFAs, and additional betaine improved REE and bulk element separation. Weathered CFA showed slightly higher REE leaching efficiency than unweathered CFA, and Class-C CFA demonstrated higher leaching efficiency but less selective partitioning than Class-F CFAs. Significantly, this method consistently exhibits a particularly high extraction efficiency for scandium across different CFAs.

Utilization of low-calcium fly ash via direct aqueous carbonation with a low-energy input: Determination of carbonation reaction and evaluation of the potential for CO2 sequestration and utilization

Environmental impacts from coal-fired power generation that produces large amounts of CO₂ and fly ash are of great interest. To reduce negative environmental impacts, fly ash utilization was investigated via a direct aqueous carbonation with a low-energy input in which the alkali calcium content in the fly ash reacted with CO₂ to form carbonate. Raw fly ash was characterized to understand the potential for direct aqueous carbonation of fly ash. The performance of the fly ash as a calcium source for direct aqueous carbonation at atmospheric pressure was investigated for different solid-liquid ratios and introduced CO₂ concentrations. Variations in fly ash elemental composition, reaction solution pH, CO₂ concentration in the reactor outlet, CO₂ uptake efficiency, CaCO₃ content and degree of carbonation were used to illustrate this process reaction. The maximum CO₂ uptake efficiency was ~0.016 g-CO₂/g-fly ash. This value was compared with previous studies, and the CO₂ uptake efficiency was comparable despite the use of a low-energy input method, i.e., direct aqueous carbonation with atmospheric pressure and unconcentrated CO₂. The calculated maximum degree of carbonation was 31.0%, which corresponds to 0.0063 g-CO₂/g-fly ash. Carbonated product characterization confirmed the carbonation reaction mechanism and safety for further utilization. A comparison of CO₂ uptake efficiency in this work with previous work, and considering the energy input and reactive species content, is provided. An assessment of the CO₂ reduction potential is provided.

Influence of the Anionic Zinc-Adeninate Metal-Organic Framework Structure on the Luminescent Detection of Rare Earth Ions in Aqueous Streams

Rare earth elements (REEs) are critical to numerous technologies; however, a combination of increasing demand, environmental concerns, and monopolistic marketplace conditions has spurred interest in boosting the domestic REE production from sources such as coal utilization byproducts. The economic viability of this approach requires rapid, inexpensive, and sensitive analytical techniques capable of characterizing the REE content during resource exploration and downstream REE processing (e.g., analyzing REE separation, concentration, and purification production steps). Luminescence-based sensors are attractive because many REEs may be sensitized to produce element-specific emission. Hence, a single material may simultaneously detect and distinguish multiple REEs. Metal-organic frameworks (MOFs) can sensitize multiple REEs, but their viability has been hindered by sensitivity and selectivity challenges. Understanding how the MOF structure impacts the REE sensing efficacy is critical to the rational design of new sensors. Here, we evaluate the sensing performance of seven different anionic zinc-adeninate MOFs with different organic linkers and/or structures for the visible-emitting REEs Tb, Dy, Sm, and Eu. The choice of a linker determines which REEs are sensitized and significantly influences their sensitivity and selectivity against competing species (here, Fe(II) and HCl). For a given linker, structural changes to the MOF can further fine-tune the performance. The MOFs produce some of the lowest detection limits (sub-10 ppb for Tb) reported for the aqueous sensitization-based REE detection. Importantly, the most selective MOFs demonstrated the ability to sensitize the REE signal at sub-ppm levels in a REE-spiked acid mine drainage matrix, highlighting their potential for use in real-world sensing applications.

Characteristics of Some Selected Methods of Rare Earth Elements Recovery from Coal Fly Ashes

The article covers the issues related to the characteristics, application, and some methods of rare earth elements (REEs) recovery from coal fly ashes. REEs are elements with growing demand and a very wide range of application, especially when it comes to modern technologies. The conducted analysis and price forecast proved the existing upward tendency, and this confirmed the need to search for new REE sources, among industrial waste (proecological effect). The development of the REE recovery technology would involve solving several problems related to REE speciation, optimization of factors controlling their extractivity and selection of the REE separation method from obtained extraction solutions with a very extreme pH and complicated composition. The paper presented advantages and disadvantages of usually used methods of REE separation from coal fly ashes, like physical and acid–base leaching. It was also presented alternative REE recovery techniques in the form of membrane and biological methods and based on ion liquids (ILs) or chelating agents. The directions of further modifications, which will allow the efficient REE recovery were presented. The aim of this article was to propose specific solutions based on the creation of appropriate multistage method of REE recovery. It will be a combination of magnetic and size separation, acid–base leaching (including roasting in justified cases), removal of matrix elements with ILs (Al, Si, and Fe), and finally REE membrane separation, allowing one to obtain the appropriate process efficiency.

Silicon-hybrid carbon dots derived from rice husk: promising fluorescent probes for trivalent rare earth element ions in aqueous media

As a novel fluorescence probe, Si–CDs could not only be applied to distinguish four groups of different rare earth element ions (REEs) but also exhibit a rapid and sensitive response towards individual Tb3+,Eu3+ and Dy3+.

A review on fly ash from coal-fired power plants: chemical composition, regulations, and health evidence

Throughout the world, coal is responsible for generating approximately 38% of power. Coal ash, a waste product, generated from the combustion of coal, consists of fly ash, bottom ash, boiler slag, and flue gas desulfurization material. Fly ash, which is the main component of coal ash, is composed of spherical particulate matter with diameters that range from 0.1 μm to >100 μm. Fly ash is predominately composed of silica, aluminum, iron, calcium, and oxygen, but the particles may also contain heavy metals such as arsenic and lead at trace levels. Most nations throughout the world do not consider fly ash a hazardous waste and therefore regulations on its disposal and storage are lacking. Fly ash that is not beneficially reused in products such as concrete is stored in landfills and surface impoundments. Fugitive dust emissions and leaching of metals into groundwater from landfills and surface impoundments may put people at risk for exposure. There are limited epidemiological studies regarding the health effects of fly ash exposure. In this article, the authors provide an overview of fly ash, its chemical composition, the regulations from nations generating the greatest amount of fly ash, and epidemiological evidence regarding the health impacts associated with exposure to fly ash.