Synthesis of Eco-friendly Cobalt Nanoparticles Using Celosia argentea Plant Extract and Their Efficacy Studies as Antioxidant, Antibacterial, Hemolytic and Catalytical Agent

A review on the green synthesis of metal (Ag, Cu, and Au) and metal oxide (ZnO, MgO, Co3O4, and TiO2) nanoparticles using plant extracts for developing antimicrobial properties

Green synthesis (GS) is a vital method for producing metal nanoparticles with antimicrobial properties. Unlike traditional methods, green synthesis utilizes natural substances, such as plant extracts, microorganisms, etc., to create nanoparticles. This eco-friendly approach results in non-toxic and biocompatible nanoparticles with superior antimicrobial activity. This paper reviews the prospects of green synthesis of metal nanoparticles of silver (Ag), copper (Cu), gold (Au) and metal oxide nanoparticles of zinc (ZnO), magnesium (MgO), cobalt (Co3O4), and titanium (TiO2) using plant extracts from tissues of leaves, barks, roots, etc., antibacterial mechanisms of metal and metal oxide nanoparticles, and obstacles and factors that need to be considered to overcome the limitations of the green synthesis process. The clean surfaces and minimal chemical residues of these nanoparticles contribute to their effectiveness. Certain metals exhibit enhanced antibacterial properties only in GS methods due to the presence of bioactive compounds from natural reducing agents such as Au and MgO. GS improves TiO2 antibacterial properties under visible light, while it would be impossible without UV activation. These nanoparticles have important antimicrobial properties for treating microbial infections and combating antibiotic resistance against bacteria, fungi, and viruses by disrupting microbial membranes, generating ROS, and interfering with DNA and protein synthesis. Nanoscale size and large surface area make them critical for developing advanced antimicrobial treatments. They are effective antibacterial agents for treating infections, suitable in water purification systems, and fostering innovation by creating green, economically viable antibacterial materials. Therefore, green synthesis of metal and metal oxide nanoparticles for antibacterial agents supports several United Nations Sustainable Development Goals (SDGs), including health improvement, sustainability, and innovation.

Formulation and Evaluation of Licorice-Extract-Enhanced Chitosan, PVA, and Gelatin-Derived Hydrogels for Wound Dressing

Wound infections remain a significant clinical challenge, impeding healing and causing deterioration. Recently, multifunctional hydrogel dressings have gained interest as an effective treatment to treat infections efficiently and enhance wound recovery. The present research is focused on the development of composite hydrogels comprising chitosan (CS), polyvinyl alcohol (PVA), gelatin (GEL) and licorice extract (LE), using the freeze gelation technique. The resulting composite hydrogels of CS/PVA/GEL incorporating LE were characterized by FTIR, XRD and SEM. FTIR analysis confirmed the presence of specific functional groups within the molecules. XRD exhibited the amorphous nature of hydrogels. SEM analysis revealed that increasing the CS ratio in hydrogels created a more porous structure with a smaller pore size. All the hydrogels demonstrated oxygen permeability, which is crucial for the healing process. Among the synthesized hydrogels, MM-2 containing PVA (20 mL) and LE (4 mL) demonstrated superior performance with a water retention capacity of 440% and moisture content of 91%. This exceptional result can be attributed to the higher proportion of PVA and the material's porous structure, which enhances its hydrophilic properties. The synthesized hydrogels showed good antibacterial potential against three selected strains of bacteria including Bacillus subtilis (B. subtilis), Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The hydrogels' cytotoxicity levels were assessed through hemolysis assay and the results demonstrated that all hydrogels were non-toxic. The hydrolytic breakdown revealed that the interconnected hydrogels with licorice components exhibited slow degradation, making them more appropriate for long-term wound treatment. Specifically, MM-4 demonstrated a 74% degradation rate and displayed 75% antioxidant activity, indicating its potential effectiveness for chronic wound applications. These characteristics of synthesized CS/PVA/GEL/LE-derived hydrogels suggest their potential use as a promising candidate for wound care applications.

A narrative review on the use of Green synthesized metallic nanoparticles for targeted cancer therapy

Cancer is a leading cause of death worldwide. While traditional and synthetic medical therapies are in place for cancer treatment, their effectiveness is hindered by various limitations, such as toxic side effects, limited availability, and high costs. In recent years, a promising alternative approach has emerged in the form of green-synthesized metallic nanoparticles (MNPs), which offer targeted cancer therapy. These nanoparticles (NPs) have garnered significant attention from cancer researchers owing to their natural or surface-induced anticancer properties, versatility of metals as agents, and eco-friendly nature. This approach may positively impact healthy cells surrounding the cancerous cells. Green-synthesized MNPs have gained popularity in cancer management because of their ease of handling in the laboratory and the affordability of starting materials compared to synthetic methods. This review analyzes green-synthesized MNPs for targeted cancer therapy, highlighting tumor-targeting strategies, synthesis methods, and clinical challenges. Unlike general reviews, it compares plant-, microbial-, and enzyme-mediated synthesis approaches, emphasizing their impact on nanoparticle stability, functionalization, and interactions with the tumor microenvironment for enhanced therapeutic efficacy.

Biosynthesis and health promoting traits of green synthesized cobalt oxide nanoparticles

Nanomedical applications have increased significantly. This work aimed to fabricate and characterize cobalt oxide nanoparticles (CoOnps) synthesized biologically via aqueous Alhagi maurorum extract and evaluate their cytotoxic and antimicrobial impacts. Green-synthesized CoOnps were prepared and analyzed using UV-Vis spectrophotometer UV-vis, Scanning electron microscopy (SEM), Transmission electron microscopy TEM, Energy dispersive X-ray analysis EDAX, Fourier transform infrared, FTIR, and X-ray diffraction (XRD). In vitro traits of green-synthesized CoOnps were studied on ovarian cancer cells (SKOV3) using a Sulforhodamine B (SRB) method. The cytotoxic effect and IC50 were estimated. Moreover, concentrations of 10, 30, 40, 70, 100, 200, 300, 400 and 500 μg/mL CoOnps were applied to investigate their antimicrobial effect against Listeria, Staphylococcus aureus and Streptococcus as gram +ve pathogenic bacteria, Bifidobacterium bifidum 2203, Bifidobacterium bifidum LMG 10,645, Bifidobacterium breve LMC 017, Bifidobacterium angulatum 2238 and Bifidobacterium longum ATCC 15,707 as probiotics, E. coli as gram -ve bacterial model and yeast strain Candida albicans. CoOnps showed anti-ovarian cancer effects at 24.02 μg/mL. Furthermore, it exerted antimicrobial activity versus Listeria, Streptococcus, S. aureus, and E. coli were 31.66 ± 0.88, 24.33 ± 2.08, 25.66 ± 0.33, and 33.00 ± 6.08; however, they did not suppress the growth of Candida albicans and all tested Bifidobacterial strains up to concentrations of 500 μg/mL with significant difference compared to all concentrations p < 0.05. Green synthesis of CoOnps is a low-cost, eco-friendly and easily prepared method. Its impressive features as cytotoxic SKOV3, a cell line ovarian cancer and antibacterial effect for some gram +ve and -ve bacteria, besides maintaining probiotics, could candidate them as competitive agents for medical, pharmacological, agricultural and food applications.

Unveiling the diverse bioactivity of cobalt oxide nanoparticles produced through carboxymethyl cellulose extraction

This study explores an eco-friendly method for synthesizing Cobalt oxide nanoparticles (Co3O4NPs) using extracted carboxymethyl cellulose (CMC) as a reducing and stabilizing agent. The Co3O4NPs, characterized via various analyses, demonstrated a crystalline structure with sizes ranging from 10.9 to 28.2 nm. Microscopic imaging confirmed a uniform spherical morphology with an average diameter of 27.2 nm. The biological activities of Co3O4NPs were investigated extensively, highlighting their superior antibacterial efficacy compared to amoxicillin-clavulanic acid. These nanoparticles exhibited potent antioxidant properties and demonstrated safety for potential applications based on erythrocyte viability results. Additionally, Co3O4NPs displayed significant potency against Michigan Cancer Foundation-7 (MCF-7) breast cancer cells and showed promising α-amylase enzyme inhibitory activity, highlighting their multifunctional therapeutic potential as antioxidant, antibacterial, anticancer, and alpha-amylase inhibition assay.

Magnetic and visible light-induced novel green synthesized magnetic Co3O4 photocatalysts via sunflower seed meal extract for anionic and cationic dye removal by adsorption assisted photocatalytic degradation

This study was aimed at the preparation of m-Co3O4 NPs (magnetic Co3O4 nanoparticles) from sunflower seed meal (SFSM) which is the waste of sunflower seed oil factories, and their application as a photocatalyst for the adsorption assistant photocatalysis degradation of methylene blue (MB), and direct yellow-50 (DY-50) under the visible irradiations. Also, the photocatalytic performance of m-Co3O4 NPs was evaluated in synthetic wastewater. The produced m-Co3O4 NPs were ferromagnetic with a saturation magnetization value of 4.3 emu g-1 and the degradation of cationic MB and anionic DY-50 dyes by 100% and 93% in 20 min and 35 min, respectively, by adsorption-assisted photocatalytic process under visible light was achieved. The reactions were found to be pseudo-second-order equation for the adsorption-assisted photocatalytic process for both dyes. The photocatalytic activity of m-Co3O4 NPs decreased slightly even after five repeated cycles. These results show that the m-Co3O4 NPs can be used successfully in dye treatment in wastewater with their adsorption-assisted photocatalytic properties, activation by visible light, magnetic separability, and low-cost production.

From green chemistry to biomedicine: the sustainable symphony of cobalt oxide nanoparticles

Deciphering the importance of nanostructures in advanced technologies for a broad application spectrum has far-reaching implications for humans and the environment. Cost-effective, abundant cobalt oxide nanoparticles (NPs) are among the most attractive and extensively utilized materials in biomedical sciences due to their high chemical stability, and biocompatibility. However, the methods used to develop the NPs are hazardous for human health and the environment. This article precisely examines diverse green synthesis methods employing plant extracts and microbial sources, shedding light on their mechanism, and eco-friendly attributes with more emphasis on biocompatible properties accompanied by their challenges and avenues for further research. An in-depth analysis of the synthesized cobalt oxide NPs by various characterization techniques reveals their multifaceted functionalities including cytotoxicity, larvicidal, antileishmanial, hemolytic, anticoagulating, thrombolytic, anticancer and drug sensing abilities. This revelatory and visionary article helps researchers to contribute to advancing sustainable practices in nanomaterial synthesis and illustrates the potential of biogenically derived cobalt oxide NPs in fostering green and efficient technologies for biomedical applications.

Synthesis of bimetallic oxides (SrO-CoO) nanoparticles decorated polyacrylamide hydrogels for controlled drug release and wound healing applications

Hydrogels are polymeric structures characterized by their three-dimensional nature, insolubility in aqueous media, and remarkable ability to absorb significant amounts of water. Owing to their exceptional biocompatibility with living tissues, hydrogels find extensive use in various biomedical applications. Guggul gum grafted polyacrylamide hydrogels (SG) were prepared and green synthesized SrO, CoO and SrO-CoO nanoparticles (NPs) were incorporated with hydrogels (SrG, CoG, Sr-CoG) respectively. The fabricated hydrogels were characterized by various analytical techniques such as FTIR, XRD and SEM. XRD results confirmed the presence of Sr and Co metal nanoparticles in the fabricated hydrogels matrix, SrG pattern showed diffraction peaks at 2θ = 30°, 36.59°, 44.11°, 50.22° and 62.20° while CoG peaks appeared at 2θ = 36.59°, 42.32°, 61.18°, 74.05° and 77.08°. SG, SrG, CoG and Sr-CoG hydrogels showed 11%, 32%, 23% and 45% radical scavenging activity respectively as compared to standard BHT (Butylated hydroxyl toluene). In vitro drug release tests results showed that SG, SrG, CoG and Sr-CoG exhibited 21%, 16%, 13% and 10% sustained release of naproxen respectively. The results revealed that SrO and CoO nanoparticles dopped hydrogels possessed good wound healing potential as compared to conventional hydrogels, which provides great potential in clinical treatment for wounds.

Green Organo-Photooxidative Method for the Degradation of Methylene Blue Dye

This study used an organophoto-oxidative material to degrade the toxic azo dye, methylene blue (MB), due to its hazardous effects on aquatic life and humans. MB is traditionally degraded using metal-based catalysts, resulting in high costs. Several organic acids were screened for organo-photooxidative applications against various azo dyes, and ascorbic acid (AA), also known as vitamin C, was found to be best for degradation due to its high photooxidative activity. It is an eco-friendly, edible, and efficient photooxidative material. A photocatalytic box has been developed for the study of organo-photooxidative activity. It was found that when AA was added, degradation efficiency increased from 42 to 95% within 240 min. Different characterization techniques, such as HPLC and GC-MS, were used after degradation for the structural elucidation of degraded products. DFT study was done for the investigation of the mechanistic study behind the degradation process. A statistical tool, RSM, was used for the optimization of parameters (concentration of dye, catalyst, and time). This study develops sustainable and effective solutions for wastewater treatment.

Investigation of the in vitro biological activities of polyethylene glycol-based thermally stable polyurethane elastomers

The intense urge to replace conventional polymers with ecofriendly monomers is a step towards green products. The novelty of this study is the extraction of starch from the biowaste of wheat bran (WB) and banana peel (BP) for use as a monomer in the form of chain extenders. For the synthesis of polyurethane (PU) elastomers, polyethylene glycol (PEG) bearing an average molecular weight Mn = 1000 g mol-1 was used as a macrodiol, which was reacted with isophorone diisocyanate (IPDI) to develop NCO-terminated prepolymer chains. These prepolymer chains were terminated with chain extenders. Two series of linear PU elastomers were prepared by varying the concentration of chain extenders (0.5-2.5 mol%), inducing a variation of 40 to 70 wt% in the hard segment (HS). Fourier-transform infrared (FTIR) spectroscopy confirmed the formation of urethane linkages. Thermal gravimetric analysis (TGA) showed a thermal stability of up to 250 °C. Dynamic mechanical analysis (DMA) revealed a storage modulus (E') of up to 140 MPa. Furthermore, the hemolytic activities of up to 8.97 ± 0.1% were recorded. The inhibition of biofilm formation was investigated against E. coli and S. aureus (%), which was supported by phase contrast microscopy.

Fabrication and In Vitro Biological Assay of Thermo-Mechanically Tuned Chitosan Reinforced Polyurethane Composites

The progressive trend of utilizing bioactive materials constitutes diverse materials exhibiting biocompatibility. The innovative aspect of this research is the tuning of the thermo-mechanical behavior of polyurethane (PU) composites with improved biocompatibility for vibrant applications. Polycaprolactone (CAPA) Mn = 2000 g-mol-1 was used as a macrodiol, along with toluene diisocyanate (TDI) and hexamethylene diisocyanate (HMDI), to develop prepolymer chains, which were terminated with 1,4 butane diol (BD). The matrix was reinforced with various concentrations of chitosan (1-5 wt %). Two series of PU composites (PUT/PUH) based on aromatic and aliphatic diisocyanate were prepared by varying the hard segment (HS) ratio from 5 to 30 (wt %). The Fourier-transformed infrared (FTIR) spectroscopy showed the absence of an NCO peak at 1730 cm-1 in order to confirm polymer chain termination. Thermal gravimetric analysis (TGA) showed optimum weight loss up to 500 °C. Dynamic mechanical analysis (DMA) showed the complex modulus (E*) ≥ 200 MPa. The scanning electron microscope (SEM) proved the ordered structure and uniform distribution of chain extender in PU. The hemolytic activities were recorded up to 15.8 ± 1.5% for the PUH series. The optimum values for the inhibition of biofilm formation were recorded as 46.3 ± 1.8% against E. coli and S. aureus (%), which was supported by phase contrast microscopy.

Prevalence of Cobalt in the Environment and Its Role in Biological Processes

Cobalt (Co) is an essential trace element for humans and other animals, but high doses can be harmful to human health. It is present in some foods such as green vegetables, various spices, meat, milk products, seafood, and eggs, and in drinking water. Co is necessary for the metabolism of human beings and animals due to its key role in the formation of vitamin B12, also known as cobalamin, the biological reservoir of Co. In high concentrations, Co may cause some health issues such as vomiting, nausea, diarrhea, bleeding, low blood pressure, heart diseases, thyroid damage, hair loss, bone defects, and the inhibition of some enzyme activities. Conversely, Co deficiency can lead to anorexia, chronic swelling, and detrimental anemia. Co nanoparticles have different and various biomedical applications thanks to their antioxidant, antimicrobial, anticancer, and antidiabetic properties. In addition, Co and cobalt oxide nanoparticles can be used in lithium-ion batteries, as a catalyst, a carrier for targeted drug delivery, a gas sensor, an electronic thin film, and in energy storage. Accumulation of Co in agriculture and humans, due to natural and anthropogenic factors, represents a global problem affecting water quality and human and animal health. Besides the common chelating agents used for Co intoxication, phytoremediation is an interesting environmental technology for cleaning up soil contaminated with Co. The occurrence of Co in the environment is discussed and its involvement in biological processes is underlined. Toxicological aspects related to Co are also examined in this review.

Green synthesized cobalt nanoparticles from Trianthema portulacastrum L. as a novel antimicrobials and antioxidants

Trianthema portulacastrum is a dietary and medicinal plant that has gained substantial importance due to its pharmacological properties. This plant was used for its various healing properties since the ancient period in ayurvedic system of medicine. The green synthesis technique is an eco-friendly as well as cost effective technique which can produce more biocompatible nanoparticles when compared with those fabricated by physio-chemical methods. Therefore, nanoparticles produced by green synthesis are credible alternatives to those which are produced by conventional synthesis techniques. This research mainly aims to produce nanoparticles with the methanolic leaf extract of T. portulacastrum. The optimized nanoparticles were further analyzed for anti-fungal, anti-bacterial and antioxidant properties. Disk diffusion assay was used for the determination of the antimicrobial property and on the other hand, DPPH radical scavenging assay as well as hydrogen peroxide scavenging activity proved the antioxidant property of the formulation. The study revealed that Escherichia coli (gram negative strain) shows greater zone of inhibition when compared with Bacillus subtilis (gram positive bacteria). The nanoparticles have also been reported to show significant anti-fungal activity against the strains of Aspergillus niger and Fusarium oxysporum which proves its desirability for its further use against both bacterial as well as fungal infections. The novel formulation can be explored dually as antimicrobial and antioxidant agent.

Pharmacological Activities and In-Silico Studies of Bioactive Compounds Identified in Organic Fractions of the Methanolic Extract of Citrullus Colocynthis

Medicinal plants have been extensively exploited for their immense pharmacological and immune-supporting potential. Fruit of Citrullus colocynthis has several active secondary metabolites such as phenolics, flavonoids, and essential oils that are used in traditional medicines as antidiabetic, anti-inflammatory, antioxidant, and antimicrobial agents. In this study, phytoconstituents in organic fractions (n-hexane, chloroform, and ethyl acetate) of the methanolic extract of C. colocynthis were analyzed and identified by FT-IR, HPLC, and GC-MS analysis. Ethyl acetate fraction showed the highest antioxidant scavenging (76 ± .769%) and anti-inflammatory (40 ± .473%) activities at the concentration of 3 mg/mL. Similarly, antidiabetic effect was measured by inhibition of α-amylase where, ethyl acetate fraction (77 ± .844%) exhibited the highest antidiabetic activity. Among all organic fractions, ethyl acetate exhibited strong antimicrobial potential followed by n-hexane and chloroform fractions against selected pathogenic bacteria. Various concentrations of the ethyl acetate extract were tested in-vivo for cytotoxicity and results indicated minor morphological changes in liver cells including ballooning, fatty droplets, and slight accumulation of extracellular matrix even at concentrations of 400 mg/kg. In-silico study showed that stigmasta-7,16-dien-3-ol had a strong interaction with COX-1 and COX-2 to reduce inflammation. The abovementioned results indicate the pharmacological strengths of C. colocynthis to fight several diseases.

Biodegradable and hemocompatible alginate/okra hydrogel films with promising stability and biological attributes

Currently, combinations of natural polymers and semi-synthetic biomolecules have gained attention for food-packaging, drug delivery, coatings, and biomedical applications. In this work, cross-linking property of two biopolymers was employed for the fabrication of hydrogel films. Sodium alginate (SAlg) and Okra gel (OkG) were used in different ratios (95:05, 75:25 and 85:15) to synthesize hydrogel films by solvent-casting method. Formation of the films was confirmed by FTIR and Raman techniques which specified the interaction between biomolecules of SAlg and OkG. XRD pattern has shown the presence of both amorphous and micro-crystalline phases in the hydrogel films and SEM studies have shown porosity, amorphousness and agglomerated morphology. TGA and DSC analyses revealed degradation of the film at 420 °C and stability studies using PBS buffer indicated stability and hydrophilic nature of hydrogel films. In-vitro degradation test was also performed for 10 weeks through the incubation of hydrogel-films in simulated body fluid and the effect of pH and temperature was also studied. Results have shown worth-some influence of okra gel on the fabricated films. Hemolytic and antioxidant activities of the gels were also determined and being non-toxic, all these ratios were found suitable for biomedical applications; especially 85:15 have shown maximum potential.

Pharmacological assessment of Co3O4, CuO, NiO and ZnO nanoparticles via antibacterial, anti-biofilm and anti-quorum sensing activities

Infectious diseases have risen dramatically as a result of the resistance of many common antibiotics. Nanotechnology provides a new avenue of investigation for the development of antimicrobial agents that effectively combat infection. The combined effects of metal-based nanoparticles (NPs) are known to have intense antibacterial activities. However, a comprehensive analysis of some NPs regarding these activities is still unavailable. This study uses the aqueous chemical growth method to synthesize Co₃O₄, CuO, NiO and ZnO NPs. The prepared materials were characterized by scanning electron microscopy, transmission electron microscopy and X-ray diffraction techniques. The antibacterial activities of NPs were tested against Gram-positive and Gram-negative bacteria using the microdilution method, such as the minimum inhibitory concentration (MIC) method. The best MIC value among all the metal oxide NPs was 0.63 against Staphylococcus epidermidis ATCC12228 through ZnO NPs. The other metal oxide NPs also showed satisfactory MIC values against different test bacteria. In addition, the biofilm inhibition and antiquorum sensing activities of NPs were also examined. The present study presents a novel approach for the relative analysis of metal-based NPs in antimicrobial studies, demonstrating their potential for bacteria removal from water and wastewater.

Phytobioactive compounds as therapeutic agents for human diseases: A review

Phytobioactive compounds are plant secondary metabolites and bioactive compounds abundantly present in medicinal plants and have remarkable therapeutic potential. Oxidative stress and antibiotic resistance are major causes of present-day ailments such as diabetes, atherosclerosis, cardiovascular disorders, cancer, and inflammation. The data for this review were collected from Google Scholar, PubMed, Directory of Open Access Journals (DOAJ), and Science Direct by using keywords: "Medicinal plants, Phytobioactive compounds, Polyphenols, Alkaloids, Carotenoids etc." Several studies have reported the pharmacological and therapeutic potential of the phytobioactives. Polyphenols, alkaloids, terpenes, and polysaccharides isolated from medicinal plants showed remarkable antioxidant, anticancer, cytotoxic, anti-inflammatory, cardioprotective, hepatoprotective, immunomodulatory, neuroprotective, and antidiabetic activities. This literature review was planned to provide comprehensive insight into the biopharmacological and therapeutic potential of phytobioactive compounds. The techniques used for the extraction and isolation of phytobioactive compounds, and bioassays required for their biological activities such as antioxidant, antimicrobial, anti-inflammatory, and cytotoxic activities, have been discussed. Characterization techniques for the structural elucidation of phytobioactive compounds such as HPLC, TLC, FTIR, GC-MS/MS, and NMR have also been discussed. This review concludes that phytobioactive compounds may be used as potential alternative to synthetic compounds as therapeutic agents for the treatment of various diseases.

Synergistic Antibacterial Screening of Cymbopogon citratus and Azadirachta indica: Phytochemical Profiling and Antioxidant and Hemolytic Activities

Current studies were performed to investigate the phytochemistry, synergistic antibacterial, antioxidant, and hemolytic activities of ethanolic and aqueous extracts of Azadirachta indica (EA and WA) and Cymbopogon citratus (EC and WC) leaves. Fourier transform infrared data verified the existence of alcoholic, carboxylic, aldehydic, phenyl, and bromo moieties in plant leaves. The ethanolic extracts (EA and EC) were significantly richer in phenolics and flavonoids as compared to the aqueous extracts (WA and WC). The ethanolic extract of C. citratus (EC) contained higher concentrations of caffeic acid (1.432 mg/g), synapic acid (6.743 mg/g), and benzoic acid (7.431 mg/g) as compared to all other extracts, whereas chlorogenic acid (0.311 mg/g) was present only in the aqueous extract of A. indica (WA). Food preservative properties of C. citratus can be due to the presence of benzoic acid (7.431 mg/g). -Gas chromatography-mass spectrometry analysis demonstrated the presence of 36 and 23 compounds in A. indica and C. citratus leaves, respectively. Inductively coupled plasma analysis was used to determine the concentration of 26 metals (Al, As, B, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, Ni, Pb, Sb, Se, Si, Sn, Sr, V, Zn, Zr, Ti); the metal concentrations were higher in aqueous extracts as compared to the ethanolic extracts. The extracts were generally richer in calcium (3000-7858 ppm), potassium (13662-53,750 ppm), and sodium (3181-8445 ppm) and hence can be used in food supplements as a source of these metals. Antioxidant potential (DDPH method) of C. citratus ethanolic extract was the highest (74.50 ± 0.66%), whereas it was the lowest (32.22 ± 0.28%) for the aqueous extract of A. indica. Synergistic inhibition of bacteria (Staphylococcus aureus and Escherichia coli) was observed when the aqueous extracts of both the plants were mixed together in certain ratios (v/v). The highest antibacterial potential was exhibited by the pure extract of C. citratus, which was even higher than that of the standard drug (ciprofloxacin). The plant extracts and their mixtures were more active against S. aureus as compared to E. coli. No toxic hemolytic effects were observed for the investigated extracts indicating their safe medicinal uses for human beings.

Metal-Organic Framework Functionalized Bioceramic Scaffolds with Antioxidative Activity for Enhanced Osteochondral Regeneration

Osteoarthritis (OA) is a degenerative disease that often causes cartilage lesions and even osteochondral damage. Osteochondral defects induced by OA are accompanied by an inflammatory arthrosis microenvironment with overproduced reactive oxygen species (ROS), resulting in the exacerbation of defects and difficulty regenerating osteochondral tissues. Therefore, it is urgently needed to develop osteochondral scaffolds that can not only promote the integrated regeneration of cartilage and subchondral bone, but also possess ROS-scavenging ability to protect tissues from oxidative stress. Herein, zinc-cobalt bimetallic organic framework (Zn/Co-MOF) functionalized bioceramic scaffolds are designed for repairing osteochondral defects under OA environment. By functionalizing Zn/Co-MOF on the 3D-printed beta-tricalcium phosphate (β-TCP) scaffolds, the Zn/Co-MOF functionalized β-TCP (MOF-TCP) scaffolds with broad-spectrum ROS-scavenging ability are successfully developed. Benefiting from its catalytic active sites and degradation products, Zn/Co-MOF endows the scaffolds with excellent antioxidative and anti-inflammatory properties to protect cells from ROS invasion, as well as dual-bioactivities of simultaneously inducing osteogenic and chondrogenic differentiation in vitro. Furthermore, in vivo results confirm that MOF-TCP scaffolds accelerate the integrated regeneration of cartilage and subchondral bone in severe osteochondral defects. This study offers a promising strategy for treating defects induced by OA as well as other inflammatory diseases.

Synthesis, Characterization and Biological Activities of Zinc Oxide Nanoparticles Derived from Secondary Metabolites of Lentinula edodes

Zinc oxide nanoparticles (ZnO NPs) are the second most prevalent metal oxide, owing to their characteristics of low cost, safe, and easily prepared. ZnO NPs have been found to exhibit unique properties which show their potential to be used in various therapies. Numerous techniques have been devised for the manufacture of zinc oxide because it is one of the nanomaterials that has received major research interest. Mushroom sources are proven to be efficient, ecologically friendly, inexpensive, and safe for humankind. In the current study, an aqueous fraction of methanolic extract of Lentinula edodes (L. edoes) was used to synthesize ZnO NPs. The biosynthesis of ZnO NPs was achieved by using the reducing and capping capability of an L. edodes aqueous fraction. Bioactive compounds from mushroom, such as flavonoids and polyphenolic compounds, are used in the green synthesis process to biologically reduce metal ions or metal oxides to metal NPs. Biogenically synthesized ZnO NPs were further characterized by using UV-Vis, FTIR, HPLC, XRD, SEM, EDX, zeta sizer and zeta potential analyses. The FTIR showed the functional group at the spectra in the range 3550-3200 cm^-1 indicated the presence of the hydroxyl (OH) group, while bands in the range 1720-1706 cm^-1 indicated C=O carboxylic stretches bonds. Furthermore, the XRD pattern of ZnO NPs created in the current study was found to be nanocrystals which are hexagonal. The SEM analysis of ZnO NPs showed spherical shapes and size distributions in the range 90-148 nm. Biologically synthesized ZnO NPs have substantial biological activities including antioxidant, antimicrobial, antipyretic, antidiabetic and anti-inflammatory potential. Biological activities showed significant antioxidant (65.7 ± 1.09), antidiabetic (85.18 ± 0.48), and anti-inflammatory potential (86.45 ± 0.60) at 300 µg inhibition in paw inflammation of (1.1 ± 0.06) and yeast-induced pyrexia (97.4 ± 0.51) at 10 mg in a dose-dependent manner. The outcomes of this research indicated that ZnO NPs significantly reduced inflammation and have the ability to scavenge free radicals and prevent protein denaturation, while also indicating their possible use in food and nutraceutical applications to treat various ailments.

Green synthesized cobalt oxide nanoparticles with photocatalytic activity towards dye removal

The present study aimed at the synthesis of cobalt oxide nanoparticles (CONPs) mediated by leaf extract of Muntingia calabura using a rapid and simple method and evaluation of its photocatalytic activity against methylene blue (MB) dye. UV-vis absorption spectrum showed multiple peaks with an optical band gap of 2.05 eV, which was concordant with the literature. FESEM image signified the irregular-shaped, clusters of CONPs, and EDX confirmed the existence of the Co and O elements. The sharp peaks of XRD spectrum corroborated the crystalline nature with a mean crystallite size of 27.59 nm. Raman spectrum substantiated the purity and structural defects. XPS signified the presence of Co in different oxidation states. FTIR image revealed the presence of various phytochemicals present on the surface and the bands at 515 and 630 cm^-1 designated the characteristic Co-O bonds. VSM studies confirmed the antiferromagnetic property with negligible hysteresis. The high BET specific surface area (10.31 m²/g) and the mesoporous nature of the pores of CONPs signified the presence of a large number of active sites, thus, indicating their suitability as photocatalysts. The CONPs degraded 88% of 10 mg/L MB dye within 300 min of exposure to sunlight. The degradation of MB dye occurred due to the formation of hydroxyl free radicals on exposure to sunlight, which followed first-order kinetics with rate constant of 0.0065 min^-1. Hence, the CONPs synthesized herein could be applied to degrade other xenobiotics and the treatment of industrial wastewater and environmentally polluted samples.

Cobalt nanoparticles synthesizing potential of orange peel aqueous extract and their antimicrobial and antioxidant activity

The ability of cobalt nanoparticles (CoNPs) to absorb electromagnetic waves led to their use as potential biomedical agents in recent years. The properties of magnetic fluid containing cobalt nanoparticles are extraordinary. Hence, this research was designed to evaluate the Co(NO₃)₂ reducing the potential of orange peel aqueous extract and assessed their antimicrobial and antioxidant activities. The aqueous extract derived from orange peel had the potential to fabricate the CoNPs from 1 M Co(NO₃)₂ and the synthesized CoNPs were successfully characterized by standard nanoparticles characterization techniques such as UV-vis spectrophotometer, Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), and Dynamic light scattering (DLS) analyses. The FTIR analysis revealed that the synthesized CoNPs were capped with active functional groups. It was characterized by predominant peaks corresponding to carbonyl (CO), amide (CO = ), and C-O of alcohols or phenols. The size and shape of CoNPs were found as 14.2-22.7 nm and octahedral, respectively, under SEM analysis. Furthermore, at increased concentration, the CoNPs demonstrated remarkable antimicrobial activity against common bacterial (Escherichia coli, Staphylococcus aureus,Bacillus subtilis, and Klebsiella pneumoniae) and fungal (Aspergillus niger) pathogens. Furthermore, these CoNPs also showed considerable in-vitro antioxidant activities against various free articles such as 2,2-diphenyl-1-picrylhydrazyl (DPPH), and Hydrogen Peroxide (H₂O₂). These results suggest that OP aqueous extract synthesized CoNPs possess considerable biomedical applications.

Advances of Cobalt Nanomaterials as Anti-Infection Agents, Drug Carriers, and Immunomodulators for Potential Infectious Disease Treatment

Infectious diseases remain the most serious public health issue, which requires the development of more effective strategies for infectious control. As a kind of ultra-trace element, cobalt is essential to the metabolism of different organisms. In recent decades, nanotechnology has attracted increasing attention worldwide due to its wide application in different areas, including medicine. Based on the important biological roles of cobalt, cobalt nanomaterials have recently been widely developed for their attractive biomedical applications. With advantages such as low costs in preparation, hypotoxicity, photothermal conversion abilities, and high drug loading ability, cobalt nanomaterials have been proven to show promising potential in anticancer and anti-infection treatment. In this review, we summarize the characters of cobalt nanomaterials, followed by the advances in their biological functions and mechanisms. More importantly, we emphatically discuss the potential of cobalt nanomaterials as anti-infectious agents, drug carriers, and immunomodulators for anti-infection treatments, which might be helpful to facilitate progress in future research of anti-infection therapy.

Marine Algae Extract (Grateloupia Sparsa) for the Green Synthesis of Co3O4NPs: Antioxidant, Antibacterial, Anticancer, and Hemolytic Activities

The aqueous extract of red algae was used for bio-inspired manufacturing of cobalt oxide nanoparticles (Co3O4NPs) and for antioxidant, antibacterial, hemolytic potency, and anticancer activity. Typical, characterization techniques include UV-Vis, SEM, EDAX, TEM, FTIR, XRD, and TGA. Using an X-ray diffraction assay, the size of the Co3O4NPs crystal was determined to range from 23.2 to 11.8 nm. Based on TEM and SEM pictures, biosynthesized Co3O4NPs' had a homogeneous spherical morphology with a 28.8 to 7.6 nm average diameter. Furthermore, Co3O4NPs biological properties were investigated, including determining the antibacterial potency using the zone of inhibition (ZOI) method and determining the minimal inhibitory concentration (MIC). The antibacterial activity of Co3O4NPs was higher than that of the ciprofloxacin standard. Alternatively, scavenging of DPPH free radical investigation was carried out to test the antioxidant capacitance of Co3O4NPs, revealing significant antioxidant ability. The biosynthesized Co3O4NPs have a dose-dependent effect on erythrocyte viability, indicating that this technique is harmless. Furthermore, bioinspired Co3O4NPs effectively against HepG2 cancer cells (IC50: 201.3 μg/ml). Co3O4NPs would be a therapeutic aid due to their antioxidant, antibacterial, and anticancer properties.

Anticancer cytotoxicity and antifungal abilities of green-synthesized cobalt hydroxide (Co(OH)2) nanoparticles using Lantana camara L

Background

Green synthesis of metal nanoparticles with pharmaceutical applications is the current focus in the field of nanomedicine. This study aims at use of Lantanacamara L as a source of green reducing agent toward synthesis of cobalt nanoparticles.

Results

Fe3+-reducing assay demonstrated that Lantana camara methanol extract (LCM) has significant electron transfer potential. Gas chromatography mass spectroscopy (GC–MS) analysis of the crude extracts revealed the presence of 7 known and 17 unknown phytochemicals in LCM. Synthesis of cobalt nanoparticles was confirmed based on color change of reaction mixture from light brown to dark brown. UV–visible spectrometry analysis showed that the synthesized particles had a λmax at 267.5 nm. Based on the two theta (2θ) and Miller indices (hkl) values obtained in XRD analysis, the particles were confirmed to be cobalt hydroxide (Co(OH)2) nanoparticles. Further dynamic light scattering (DLS) analysis showed that the average size of the Co(OH)2 nanoparticles is 180 nm. SEM image analysis of the particles revealed that they are spherical mass of feather-like structure, contributing toward increased surface area of the particles. Further, the pharmaceutical potential of the Co(OH)2 nanoparticles was evaluated against eukaryotic cancer and fungal cells. MTT cytotoxicity analysis showed that Co(OH)2 nanoparticles have selective toxicity toward HCT-116 cancer cells with an IC50 value of 25 µg/ml and reduced cytotoxicity to non-cancerous VERO cells with an IC50 value of 200 µg/ml suggesting that the particles possess selective anti-cancerous cytotoxicity. Additionally, the particles demonstrated significant antifungal activity against 5 human fungal pathogens.

Conclusions

Results of this study conclude that green-synthesized Co(OH)2 nanoparticles using Lantanacamara L possess excellent eukaryotic cytotoxicity against cancer cells and fungal pathogens.

Methods for Green Synthesis of Metallic Nanoparticles Using Plant Extracts and their Biological Applications - A Review

Nanotechnology, a fast-developing branch of science, is gaining extensive popularity among researchers simply because of the multitude of applications it can offer. In recent years, biological synthesis has been widely used instead of physical and chemical synthesis methods, which often produce toxic products. These synthesis methods are now being commonly adapted to discover new applications of nanoparticles synthesized using plant extracts. In this review, we elucidate the various ways by which nanoparticles can be biologically synthesized. We further discuss the applications of these nanoparticles.

Ultrasound Assisted Extraction and Characterization of Bioactives From Verbascum thapsus Roots to Evaluate Their Antioxidant and Medicinal Potential

Worldwide, Verbascum thapsus is used for the treatment of various ailments owing to the presence of bioactives of therapeutic potential. Current study was planned to extract bioactives from V thapsus roots using methanol and water as solvents under stimulated effect of ultrasonic waves and characterize them to evaluate their potential benefits. Proximate analysis explored the presence of significant contents of protein, fats, fiber, organic and inorganic minerals. Fourier transform infrared spectra and high-performance liquid chromatography chromatogram indicated the presence of different phytochemicals having antioxidant potential as evidenced by total phenolic contents, total flavonoids content and 2,2-diphenyl-1-picrylhydrazyl activity of both extracts. Both extracts displayed excellent antimicrobial potential against Staphylococcus aureus (S aureus) and Fusarium Solani (F solani). Aqueous and methanolic extracts exhibited higher inhibition of biofilm made by Bacillus subtilis (B subtilis) as 55.09 and 61.58%, respectively in comparison to biofilm of Escherichia coli ( E coli) as 48.11 and 36.51%, respectively. Methanol extract exhibited anti-amylase activity (IC50 5.26 ± .31 μg/mL) with an inhibition rate of 68.11% whereas IC50 of aqueous extract was 6.59 ± .53 μg/mL with an inhibition rate of 63.53%. Inhibitory potential against α-glucosidase (IC50 3.70 ± .94 ppm) was demonstrated by methanol extract in comparison to aqueous extract (IC50 7.58 ± .15). The study concluded that V thapsus roots have significant medicinal potential due to the presence of variety of bioactive molecules and can be used in pharmaceutical preparations.

Evaluating the antibacterial effect of cobalt nanoparticles against multi-drug resistant pathogens

This study aimed to estimate the effect of cobalt nanoparticles (Co NPs) with different concentrations against multidrug-resistant (MDR) pathogenic bacteria. Three isolates of Staphylococcus aureus (gram-positive), Proteus spp. (gram-negative), and Escherichia coli (gram-negative) bacteria were extracted from various clinical examples utilizing routine methods on bacteriological culture media. The antibacterial sensitivity of commercial antibiotics such as Ciprofloxacin, Cefotaxime, Gentamycin, and Amoxicillin was broken down on a Muller Hinton agar plate and evaluated using the disk diffusion method. The study results demonstrated the antibacterial effect of the Co NPs against the bacterial isolates with three different concentrations utilized in the study. The results indicated that the Co NPs showed the highest antibacterial activity when utilizing 100 μg/ml against Escherichia coli followed by Proteus spp and Staphylococcus aureus with zones of inhibition measured as 22.2±0.1 mm, 20.3±0.15 mm, and 15.8±0.1 mm; respectively. Co NPs at a 100 μg/mL concentration showed higher inhibition zones than several common antibiotics except for Ciprofloxacin, which demonstrated better antibacterial activity against the bacterial isolates employed in this study. Scanning Electron Microscope (SEM)and X-Ray diffraction (XRD)studies confirmed that Cobalt nanoparticles (Co NPs) were synthesized from cobalt sulphate solution with a size ranging from 40 nm to 60 nm. The nanoparticles showed a crystalline structure with a round shape and smooth surface. The antibacterial resistance of Co NPs against three common bacteria such as Staphylococcus aureus, Proteus spp, and Escherichia coli was assessed in this study. The optimum concentration of the Co NPs was identified as 100 μg/ml, which could provide a similar or higher antibacterial effect.

Exploring the therapeutic potential of Hibiscus rosa sinensis synthesized cobalt oxide (Co3O4-NPs) and magnesium oxide nanoparticles (MgO-NPs)

Herein, we present a green, economic and ecofriendly protocol for synthesis of cobalt oxide (Co3O4-NPs) and magnesium oxide nanoparticles (MgO-NPs) for multifaceted biomedical applications. In the study, a simple aqueous leaf extract of Hibiscus rosa sinensis, was employed for the facile one pot synthesis of Co3O4-NPs and MgO-NPs. The well characterized NPs were explored for multiple biomedical applications including bactericidal activity against urinary tract infection (UTI) isolates, leishmaniasis, larvicidal, antidiabetic antioxidant and biocompatibility studies. Our results showed that both the NPs were highly active against multidrug resistant UTI isolates as compared to traditional antibiotics and induced significant zone of inhibition against Proteus Vulgaris, Pseudomonas Aurigenosa and E.coli. The NPs, in particular Co3O4-NPs also showed significant larvicidal activity against the Aedes Aegypti, the mosquitoes involve in the transmission of Dengue fever. Similarly, excellent leishmanicidal activity was also observed against both the promastigote and amastigote forms of the parasite. Furthermore, the particles also exhibited considerable antidiabetic activity by inhibiting α-amylase and α-glucosidase enzymes. The biosynthesized NPs were found to be excellent antioxidant and biocompatible nanomaterials. Owing to ecofriendly synthesis, non-toxic and biocompatible nature, the Hibiscus rosa sinensis synthesized Co3O4-NPs and MgO-NPs can be exploited as potential candidates for multiple biomedical applications.

Green fabrication of Co and Co3O4 nanoparticles and their biomedical applications: A review

Nanotechnology is the fabrication, characterization, and potential application of various materials at the nanoscale. Over the past few decades, nanomaterials have attracted researchers from different fields because of their high surface-to-volume ratio and other unique and remarkable properties. Cobalt and cobalt oxide nanoparticles (NPs) have various biomedical applications because of their distinctive antioxidant, antimicrobial, antifungal, anticancer, larvicidal, antileishmanial, anticholinergic, wound healing, and antidiabetic properties. In addition to biomedical applications, cobalt and cobalt oxide NPs have been widely used in lithium-ion batteries, pigments and dyes, electronic thin film, capacitors, gas sensors, heterogeneous catalysis, and for environmental remediation purposes. Different chemical and physical approaches have been used to synthesize cobalt and cobalt oxide NPs; however, these methods could be associated with eco-toxicity, cost-effectiveness, high energy, and time consumption. Recently, an eco-friendly, safe, easy, and simple method has been developed by researchers, which uses biotic resources such as plant extract, microorganisms, algae, and other biomolecules such as starch and gelatin. Such biogenic cobalt and cobalt oxide NPs offer more advantages over other physicochemically synthesized methods. In this review, we have summarized the recent literature for the understanding of green synthesis of cobalt and cobalt oxide NPs, their characterization, and various biomedical applications.

Synthesis, spectroscopic properties, crystal structures, DFT studies, and the antibacterial and enzyme inhibitory properties of a complex of Co(II) 3,5-difluorobenzoate with 3-pyridinol

A new complex, [Co(DFB)2(3-Pyr)2(H2O)2] (where DFB = 3,5-difluorobenzoate, 3-Pyr = 3-pyridinol), is synthesized and characterized using different techniques (elemental analysis, Fourier transform infrared spectroscopy, and single-crystal X-ray diffraction). Looking at the crystal structure of the complexes, the cobalt atom is coordinated by two nitrogen atoms from two 3-Pyr ligands, two carboxylate oxygen atoms from two DFB anions, and two oxygen atoms from two water molecules. The complex has distorted octahedral geometry around the cobalt atom center complex and crystallizes in the P21/n space group (monoclinic system). Geometry optimization, frequency analysis, and energy quantum chemical calculations on the complex are performed by Density Functional Theory [B3LYP/6-31G (d,p) basis set] to predict the molecular properties. The novel complex is tested against the metabolic isoenzymes human carbonic anhydrases I and II. The novel complex shows Ki values of 317.26 ± 23.25 µM against hCA I and 255.41 ± 48.05 µM against hCA II; the IC50 values for these isoenzymes are 274.37 and 204.33 µM.