Ultralight Magnetic and Dielectric Aerogels Achieved by Metal-Organic Framework Initiated Gelation of Graphene Oxide for Enhanced Microwave Absorption

MOFs-based aerogels and their derivatives for water treatment: A review

Metal-organic frameworks (MOFs) are a class of environmental nano-materials composed of metal ions and organic ligands with remarkable physical and chemical properties, such as huge specific surface area as well as abundant pore volume. Based on their unique structures and properties, MOFs have demonstrated potential applications in the fields of adsorption, gas storage, separation membranes, and catalysis, and have become popular candidates in water treatment technologies. However, MOFs particles in powder form are prone to agglomeration and adhesion effects in water, which leads to problems such as difficult separation and secondary pollution. As an ideal carrier for MOFs, aerogels exhibit a unique three-dimensional interconnected pore structure, which endows aerogels with high porosity properties and excellent adsorption capacity. Researchers have skillfully combined MOFs with aerogels to create a new type of MOF aerogel composites (MOFACs). These composites are converted into highly porous and high-strength carbon aerogels through a high-temperature pyrolysis process in an inert environment. These carbon aerogels not only retain the high catalytic efficiency of MOFs, but also inherit the advantages of aerogels in terms of light weight, low density and easy handling. This paper reviews various types of MOFACs, each of which possesses different chemical compositions and physical properties, thus adapting to different applications. The paper also discusses the applications of MOFACs and carbon aerogels in water treatment for catalysis, selective adsorption and solid phase microextraction.

Enhancing Interfacial Polarization through Electron Accumulation in Carbon Nanotube-Encapsulated α-Fe2O3 for Highly Efficient Microwave Absorption

Interface polarization (one of the slow polarizations) is considered the primary mechanism driving microwave absorption (MA), but limitations in material composition and microstructure design often lead to weak interfacial polarization relaxation. In this work, we developed an interesting heterostructure consisting of carbon nanotube-encapsulated α-Fe2O3 nanocolumns (CNTs@α-Fe2O3). The curvature effects of CNTs induce a built-in electric field between CNTs and α-Fe2O3 nanocolumns, facilitating effective interface polarization. Under microwave irradiation, electron accumulation at the interfaces, driven by the energy-level mismatch between the two materials, further strengthens interface polarization, leading to a highly efficient MA performance. This heterostructured material achieves a minimum reflection loss of -74.1 dB at a thickness of 1.8 mm and an effective absorption bandwidth (reflection loss ≤ -10 dB) of 5.2 GHz (11.9 ∼ 17.1 GHz) at a thickness of only 1.5 mm. X-ray photoelectron spectroscopy and Raman scattering show a distinct blueshift in the Fe 2p binding energy and the A1g mode energy (exclusively associated with Fe atom vibrations), suggesting substantial charge transfer and redistribution at the interface associated with enhanced interface polarization. This work provides insights into interface polarization through the strategic design of energy levels and materials.

Activating Basal Plane Inert Sites of Iron Telluride for Motivational Electromagnetic Microwave Absorption

The basal plane inert sites and inadequate intrinsic dielectric relaxation are the major bottlenecks limiting the electromagnetic microwave (EMW) absorption performance of transition metal tellurides (TMTs). Here, an effective dual defect model based on electron polarization relaxation is established on iron telluride (FeTe) flakes via one-step O2 plasma treatment. Therefore, the basal plane inert sites of FeTe are activated by Te vacancies and O incorporation, which form abundant polarization centers, resulting in charge redistribution and increased dipole site density, thereby effectively optimizing dielectric relaxation loss. Consequently, the optimal EMW attenuation performance achieves a minimum reflection loss exceeding -69.6 dB at a thickness of 2.2 mm, with an absorption bandwidth of up to 4.9 GHz at a thickness of 1.3 mm. Besides, FeTe with dual defect exhibits a prominent radar cross-section reduction of 42 dBsm, indicating excellent radar wave attenuation capability. This study illustrates an innovative model system for elucidating dielectric relaxation loss mechanisms and provides a feasible approach to developing high-loss TMTs-based absorbers.

Graphene Oxide Research: Current Developments and Future Directions

Graphene oxide (GO), a pivotal derivative of graphene, has revolutionized nanotechnology with its tunable physicochemical properties and interdisciplinary applications in energy storage, environmental remediation, and biomedicine. Despite its exponential research growth, existing reviews remain fragmented, lacking holistic insights into evolving synthesis-application linkages, global collaboration patterns, and emerging convergence trends. This study bridges these gaps through a scientometric analysis of 14,124 peer-reviewed articles (2022-2025) from the Web of Science Core Collection, utilizing CiteSpace for co-occurrence network mapping, burst detection, and cluster analysis. Key findings reveal (1) a thematic shift from traditional synthesis optimization (e.g., Hummers' method) toward driven material design and sustainable applications like GO membranes for water purification; (2) China's dominance in publication output (38.5%) contrasts with the U.S. and Europe's leadership in global collaborations; (3) interdisciplinary journals such as Chemical Engineering Journal (centrality: 0.25) and emerging clusters like "circular economy" signal transformative priorities; and (4) critical gaps in scalability, ecological safety, and cost-effective production hinder industrial translation. This work provides a roadmap for aligning research with sustainability goals, fostering global partnerships, and accelerating innovations in scalable nanotechnology.

Dimensional Design of Cellulose Aerogels with Schottky Contact for Efficient Microwave Absorption

Cellulose aerogels, as a novel class of carbon-based materials, exhibit immense potential in the field of microwave absorption (MWA) due to their biocompatibility, low density, unique porous structure, and tunable architecture. However, the development of multi-dimensional components with specialized heterogeneous structures, which are based on cellulose aerogels, remains a significant challenge. This 0D/1D/3D structural configuration facilitates tunable electromagnetic properties and favorable impedance matching. The Schottky contact at the ZnO/Ni interface, in particular, induces a strong interfacial polarization, and the multi-dimensional structural design results in multiple heterointerfaces. Density functional theory (DFT) calculations reveal that the unique Schottky contact induces a Schottky barrier that causes band bending, facilitating the directed migration of electrons at the interface and the formation of an internal electric field, thus significantly accelerating the multipolar relaxation process. As anticipated, the CCMC/ZnO@Ni aerogel exhibits a minimum reflection loss (RLmin) value of -64.0 dB at 13.9 GHz at a thickness of 2.0 mm, and its effective absorption bandwidth (EAB) reaches 4.9 GHz. This work gives valuable guidance and inspiration for the design of multi-dimensional materials that are composed of dimensional gradient structures, which holds great application potential for electromagnetic wave (EMW) attenuation.

Heterointerface between Carbon Nano-Onions and Fluorinated Boron Nitride Nanostructures for Improved Microwave Absorption Properties

Carbon-based materials are considered to be promising candidates for lightweight microwave absorption materials (MAMs). However, single carbon-based materials cannot meet the requirements of wide effective absorption bandwidth (EAB) and strong microwave absorption due to the missing magnetic loss. Combining with lightweight magnetic materials via rational design of microstructures attends to be an effective way to achieve high-performance microwave absorption. In this study, core-shell carbon nano-onions@fluorinated boron nitrides (CNOs@F-BNNOs) nanocomposites with N-C and F-B bridging were obtained by a simple in situ pyrolytic polymerization as well as a hydrothermal fluorination strategy and exhibited excellent microwave absorption properties. Furthermore, the results indicate that the addition of F-BNNOs not only improves polarization loss and optimizes impedance matching but also enhances the magnetic loss effect, thereby improving the electromagnetic wave absorption performance (EWAP). Among these compositions, CNOs@F-BNNOs achieve an excellent minimum reflection loss (RLmin) value of -43.23 dB at 17.23 GHz, with an EAB of 10.54 GHz at a thickness of 2.80 mm. Additionally, CNOs@F-BNNOs have excellent thermal conductivity. Therefore, this work presents a novel approach to constructing lightweight, efficient, and promising core-shell microwave absorption materials (MAMs).

Synthesis, Electrical Conductivity, and Wave-Absorption Performances of Bamboo-Based Composites Co-Doped with Graphene Oxide and Polyaniline

Bamboo was carbonized and further modified via co-doping with graphene oxide (GO) and polyaniline (PANI) to prepare microwave absorption composites (GO/PANI/CB) by in situ polymerization of 1R-(-)-Camphorsulfonic acid (L-CSA). The conductivity of GO/PANI/CB reached 2.17 ± 0.05 S/cm under the optimized process conditions. The oxygen-containing group of GO reacts with PANI to form hydrogen bonds and thus polymerize. The GO and PANI particles covered the carbonized bamboo (CB) surface in a disordered aggregation form. Based on the measuring method of the vector network analyzer (VNA), the microwave-absorption performance of GO/PANI/CB was investigated. With 30% addition of GO/PANI/CB, the minimum reflection loss (RLmin) at 7.12 GHz with a thickness of 3.5 mm of samples reached -49.83 dB. The effective absorption bandwidth (<-10 dB) is as high as 4.72 GHz with a frequency range of 11.68-16.40 GHz and a thickness of 2 mm. Compared with many PANI based electromagnetic wave absorbing materials reported in recent years, GO/PANI/CB provides improved microwave-absorption performance while maintaining high absorption bandwidth. GO/PANI/CB exhibited the advantages of simple preparation, low cost, renewability, light texture, thinness, wide absorption bandwidth, and strong absorption ability, and can be used for new microwave absorption materials.

Current progress and frontiers in three-dimensional macroporous carbon-based aerogels for electromagnetic wave absorption: a review

In the present era of rapid development in electronic information technology, electromagnetic (EM) pollution is increasingly receiving widespread concerns due to its potential threats to electronic devices and human health. EM wave absorbing materials (EWAMs) play an increasingly important role in preventing exposure to EM waves because they can attenuate incident EM waves through sustainable energy dissipation. Among the numerous EWAMs developed in recent years, three-dimensional (3D) macroporous carbon-based aerogels have been considered one of the most promising candidates as high-performance EWAMs not only due to their flexible component options and the beneficial synergies between their different components but also for their open skeletons, which provide a unique structural contribution to accelerating the consumption of EM waves. In this review, we focus on the current progress of 3D macroporous carbon-based aerogels toward EM absorption and highlight different strategies for their preparation, including biomass transformation, template method, hydrothermal/solvothermal self-assembly, polymer foaming, and metal-organic frameworks (MOFs) topological transformation. Moreover, we discuss and analyze the effects of composition, optimization and structural engineering on their EM absorption performances. After a comprehensive evaluation of the performance of 3D macroporous carbon-based aerogels, we further propose some challenges and perspectives for the development of 3D macroporous carbon-based aerogels, and envision their broad application prospects in the future.

Metal-Organic Framework and Covalent-Organic Framework-Based Aerogels: Synthesis, Functionality, and Applications

Metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs)-based aerogels are garnering significant attention owing to their unique chemical and structural properties. These materials harmoniously combine the advantages of MOFs and COFs-such as high surface area, customizable porosity, and varied chemical functionality-with the lightweight and structured porosity characteristic of aerogels. This combination opens up new avenues for advanced applications in fields where material efficiency and enhanced functionality are critical. This review provides a comparative overview of the synthetic strategies utilized to produce pristine MOF/COF aerogels as well as MOF/COF-based hybrid aerogels, which are functionalized with molecular precursors and nanoscale materials. The versatility of these aerogels positions them as promising candidates for addressing complex challenges in environmental remediation, energy storage and conversion, sustainable water-energy technologies, and chemical separations. Furthermore, this study discusses the current challenges and future prospects related to the synthesis techniques and applications of MOF/COF aerogels.

Preparation of cellulose derived carbon/reduced graphene oxide composite aerogels for broadband and efficient microwave dissipation

The development of cellulose derived carbon-based composite aerogels with light weight, broad bandwidth and strong absorption remains a challenging task. In this work, the cellulose derived carbon/reduced graphene oxide composite aerogels were prepared by a two-stage process of chemical crosslinking and high-temperature carbonization. The results revealed that the as-fabricated binary composite aerogels had a unique lightweight characteristic and three-dimensional porous network structure, which was chemically crosslinked by epichlorohydrin. Furthermore, the weight concentration of graphene oxide (GO) had a notable influence on the electromagnetic parameters and microwave absorption properties of the composite aerogels. The obtained binary composite aerogel possessed the optimal microwave dissipation capability when the concentration of GO was 1.5 mg/mL. Remarkably, the minimum reflection loss reached -50.42 dB at a thickness of 2.47 mm and a filling ratio of 17.5 wt%. Concurrently, the composite aerogel with a comparable thickness of 2.73 mm showed a wide effective absorption bandwidth of 7.28 GHz, spanning the total Ku-band and extending into a portion of the X-band. The radar cross section contribution of binary composite aerogels in the far-field was also simulated by computer simulation technique. In addition, the potential microwave attenuation mechanism was proposed. It was believed that the results of this paper would offer a reference for the preparation of cellulose derived carbon-based composite aerogels as efficient and broadband microwave absorbers.

Comprehensive insights into the application of graphene-based aerogels for metals removal from aqueous media: Surface chemistry, mechanisms, and key features

Efficient removal of heavy metals and other toxic metal pollutants from wastewater is essential to protect human health and the surrounding vulnerable ecosystems. Therefore, significant efforts have been invested in developing practical and sustainable tools to address this issue, including high-performance adsorbents. In this respect, within the last few years, graphene-based aerogels/xerogels/cryogels (GBAs) have emerged and drawn significant attention as excellent materials for removing and recovering harmful and valuable metals from different aqueous media. Such an upward trend is mainly due to the features of the aerogel materials combined with the properties of the graphene derivatives within the aerogel's network, including the GBAs' unique three-dimensional (3D) porous structure, high porosity, low density, large specific surface area, exceptional electron mobility, adjustable and rich surface chemistry, remarkable mechanical features, and tremendous stability. This review offers a comprehensive analysis of the fundamental and practical aspects and phenomena related to the application of GBAs for metals removal. Herein, we cover all types of (bottom-up) synthesized GBAs, including true microporous graphene-based aerogels as well as other 3D graphene-based open-cell interconnected mesoporous and macroporous aerogels, foams, and sponges. Indeed, we provide insights into the fundamental understanding of the GBAs' suitability for such an important application by revealing the mechanisms involved in metals removal and the factors inducing and controlling the highly selective behavior of these distinctive adsorbents. Besides conventional adsorptive pathways, we critically analyzed the ability of GBAs to electrochemically capture metal pollutants (i.e., electrosorption) as well as their efficiency in metals detoxification through reductive mechanisms (i.e., adsorption-reduction-readsorption). We also covered the reusability aspect of graphene aerogels (GAs)-based adsorbents, which is strongly linked to the GBAs' outstanding stability and efficient desorption of captured metals. Furthermore, in view of their numerous practical and environmental benefits, the development and application of magnetically recoverable GAs for metals removal is also highlighted. Moreover, we shed light on the potential practical and scalable implementation of GBAs by evaluating their performance in continuous metals removal processes while highlighting the GBAs' versatility demonstrated by their ability to remove multiple contaminants along with metal pollutants from wastewater media. Finally, this review provides readers with an accessible overview and critical discussion of major recent achievements regarding the development and applications of GAs-based adsorbents for metal ions removal. Along with our recommendations and suggestions for potential future work and new research directions and opportunities, this review aims to serve as a valuable resource for researchers in the field of wastewater treatment and inspire further progress towards developing next-generation high-performance GBAs and expanding their application.

Interface/Dipole Polarized Antibiotics-Loaded Fe3O4/PB Nanoparticles for Non-Invasive Therapy of Osteomyelitis Under Medical Microwave Irradiation

Due to their poor light penetration, photothermal therapy and photodynamic therapy are ineffective in treating deep tissue infections, such as osteomyelitis caused by Staphylococcus aureus (S. aureus). Here, a microwave (MW)-responsive magnetic targeting composite system consisting of ferric oxide (Fe3O4)/Prussian blue (PB) nanoparticles, gentamicin (Gent), and biodegradable poly(lactic-co-glycolic acid) (PLGA) is reported. The PLGA/Fe3O4/PB/Gent complex is used in combination with MW thermal therapy (MTT), MW dynamic therapy (MDT), and chemotherapy (CT) to treat acute osteomyelitis infected with S. aureus-infected. The powerful antibacterial effect of the PLGA/Fe3O4/PB/Gent is determined by the synergistic effects of heat and reactive oxygen species (ROS) generation by the Fe3O4/PB nanoparticles under MW irradiation and the effective release of Gent at the infection site via magnetic targeting. The antibacterial mechanism of the PLGA/Fe3O4/PB/Gent under MW irradiation is analyzed using bacterial transcriptome RNA sequencing. The MW heat and ROS reduce the activity of the protein transporters on the bacterial membrane, along with the transport of various ions and the acceleration of phosphate metabolism, which can lead to increased permeability of the bacterial membrane, damage the ribosome and DNA, and accompany the internal protein efflux of the bacteria, thus effectively killing the bacteria.

Recent Progress in MOF-Aerogel Fabrication and Applications

Recent advancements in metal-organic frameworks (MOFs) underscore their significant potential in chemical and materials research, owing to their remarkable properties and diverse structures. Despite challenges like intrinsic brittleness, powdered crystalline nature, and limited stability impeding direct applications, MOF-based aerogels have shown superior performance in various areas, particularly in water treatment and contaminant removal. This review highlights the latest progress in MOF-based aerogels, with a focus on hybrid systems incorporating materials like graphene, carbon nanotube, silica, and cellulose in MOF aerogels, which enhance their functional properties. The manifold advantages of MOF-based aerogels in energy storage, adsorption, and catalysis are discussed, with an emphasizing on their improved stability, processability, and ease of handling. This review aims to unlock the potential of MOF-based aerogels and their real-world applications. Aerogels are expected to reshape the technological landscape of MOFs through enhanced stability, adaptability, and efficiency.

Designing Electronic Structures of Multiscale Helical Converters for Tailored Ultrabroad Electromagnetic Absorption

Atomic-scale doping strategies and structure design play pivotal roles in tailoring the electronic structure and physicochemical property of electromagnetic wave absorption (EMWA) materials. However, the relationship between configuration and electromagnetic (EM) loss mechanism has remained elusive. Herein, drawing inspiration from the DNA transcription process, we report the successful synthesis of novel in situ Mn/N co-doped helical carbon nanotubes with ultrabroad EMWA capability. Theoretical calculation and EM simulation confirm that the orbital coupling and spin polarization of the Mn-N4-C configuration, along with cross polarization generated by the helical structure, endow the helical converters with enhanced EM loss. As a result, HMC-8 demonstrates outstanding EMWA performance, achieving a minimum reflection loss of -63.13 dB at an ultralow thickness of 1.29 mm. Through precise tuning of the graphite domain size, HMC-7 achieves an effective absorption bandwidth (EAB) of 6.08 GHz at 2.02 mm thickness. Furthermore, constructing macroscale gradient metamaterials enables an ultrabroadband EAB of 12.16 GHz at a thickness of only 5.00 mm, with the maximum radar cross section reduction value reaching 36.4 dB m2. This innovative approach not only advances the understanding of metal-nonmetal co-doping but also realizes broadband EMWA, thus contributing to the development of EMWA mechanisms and applications.

Graphene-Wrapped Magnetic Multichamber Ti3C2Tx Spheres for Stable Broadband Microwave Absorption

Two-dimensional transition metal carbides/nitrides (MXenes) have aroused widespread interest in the field of microwave absorption because of their unique layered structures. However, the inherent aggregation, poor impedance matching, and low chemical stability of MXenes inevitably obstruct their practical applications. Herein, a multichamber Fe3O4/Ti3C2Tx@reduced graphene oxide (FT@RGO) hierarchical structure was constructed through self-assembly and sacrificial template strategies where the Ti3C2Tx nanosheets were assembled into hollow microspheres that were decorated with Fe3O4 nanospheres and wrapped by RGO nanosheets. The massive heterointerfaces and interior cavities favor enhanced microwave absorption performance via interfacial polarization, multiple scattering/reflections, and dielectric-magnetic synergistic effects. Consequently, the synthesized ultralight FT@RGO foam (0.009 g/cm3) presents superior microwave absorption ability with the minimum reflection loss of -50.5 dB at the matching thickness of 2.5 mm and effective absorption bandwidth of 8.0 GHz covering the frequency range of 10.0-18.0 GHz at the thickness of 2 mm. Furthermore, the encapsulation of hollow Ti3C2Tx spheres by RGO nanosheets avoids direct contact with external air, which considerably improves the stability of Ti3C2Tx and ensures the long-term application of FT@RGO foam in a conventional environment. This work provides a reference for the structural design of MXene-based materials as broadband and durable microwave absorbers.

Customized Pore Creation Strategies for Hyperelastic, Robust, Insulating Multifunctional MXene Aerogels for Microwave Absorption

The construction of heterogeneous microstructure and the selection of multicomponents have turned into a research hotspot in developing ultralight, multifunctional, high-efficiency electromagnetic wave absorbing (EMA) materials. Although aerogels are promising materials to fulfill the above requirements, the increase in functional fillers inevitably leads to the deterioration of intrinsic properties. Tuning the electromagnetic properties from the structural design point of view remains a difficult challenge. Herein, we design customized pore creation strategies via introducing sacrificial templates to optimize the conductive path and construct the discontinuous dielectric medium, increasing dielectric loss and achieving efficient microwave absorption properties. A 3D porous composite (MEM) was crafted, which encapsulated an EVA/FeCoNi (EVA/MNPs) framework with Ti3C2Tx MXene coating by employing a direct heated cross-linking and immersion method. Controllable adjustment of the conductive network inside the porous structure and regulation of the dielectric character are achieved by porosity variation. Eventually, the MEM-5 with a porosity of 66.67% realizes RLmin of -39.2 dB (2.2 mm) and can cover the entire X band. Moreover, through off-axis electronic holography and the calculation of conduction loss and polarization loss, the dielectric property is deeply investigated, and the inner mechanism of optimization is pointed out. Thanks to the inherent characteristic of EVA and the porous structure, MEM-5 showed excellent thermal insulating and superior compressibility, which can maintain 60 °C on a 90-100 °C continuous heating stage and reached a maximum compressive strength of 60.12 kPa at 50% strain. Conceivably, this work provides a facile method for the fabrication of highly efficient microwave absorbers applied under complex conditions.

Multifunctional carbon aerogels loaded with pea-pod-like carbon nanotubes for outstanding electromagnetic wave absorption performance

Although ordered porous carbon materials (PCMs) have shown promising potential in the field of electromagnetic wave absorption (EWA), creating multifunctional PCMs with outstanding microwave absorption performance remains a significant challenge. Herein, ordered porous carbon aerogels loaded with pea-pod-like nitrogen-doped carbon nanotubes (CNTs) were fabricated via orientation freeze-drying followed by high-temperature pyrolysis. The optimized aerogel exhibits extraordinary EWA performance with a broad effective absorption bandwidth of 7.68 GHz and exceptionally strong absorption of -91.58 dB at a low filling ratio of only 3 wt%, which is the largest absorption strength among all known aerogels to date. The exceptional EWA performance is attributed to the synergistic effect of abundant loss mechanisms resulting from a unique pod-like structure in ordered porous carbon aerogel, where nitrogen-doped CNTs encapsulate magnetic alloy nanoparticles. Optimized aerogel exhibits superior compressive elasticity, thermal insulation, and light weight, laying the groundwork for designing practical next-generation EWA materials.

The Surface Confinement of FeO Assists in the Generation of Singlet Oxygen and High-Valent Metal-Oxo Species for Enhanced Fenton-Like Catalysis

Transition metal compounds (TMCs) have long been potential candidate catalysts in persulfate-based advanced oxidation process (PS-AOPs) due to their Fenton-like catalyze ability for radical generation. However, the mechanism involved in TMCs-catalyzed nonradical PS-AOPs remains obscure. Herein, the growth of FeO on the Fe3O4/carbon precursor is regulated by restricted pyrolysis of MIL-88A template to activate peroxymonosulfate (PMS) for tetracycline (TC) removal. The higher FeO incorporation conferred a 2.6 times higher degradation performance than that catalyzed by Fe3O4 and also a higher interference resistance to anions or natural organic matter. Unexpectedly, the quenching experiment, probe method, and electron paramagnetic resonance quantitatively revealed that the FeO reassigned high nonradical species (1O2 and FeIV═O) generation to replace original radical system created by Fe3O4. Density functional theory calculation interpreted that PMS molecular on strongly-adsorbed (200) and (220) facets of FeO enjoyed unique polarized electronic reception for surface confinement effect, thus the retained peroxide bond energetically supported the production of 1O2 and FeIV═O. This work promotes the mechanism understanding of TMCs-induced surface-catalyzed persulfate activation and enables them better perform catalytic properties in wastewater treatment.

Activating Excellent Electromagnetic Wave Absorption of Micromorphology-Optimized Cu/C Nanocomposite Fibers via a Metal-Organic Framework Template-Assisted Strategy

Morphological engineering is crucial for conceiving high-efficiency electromagnetic wave (EMW) absorption materials. However, for carbon fiber-based composites, the management of micromorphology is significantly astricted by complex fabrication. It remains highly challenging to clarify the micromorphological influences on the EMW loss mechanism of carbon fiber-based absorption materials. In this work, micromorphology-optimized Cu/C nanocomposite fibers are prepared by virtue of a metal-organic framework (MOF) template-assisted strategy. Through skillfully grafting the morphology-regulation capacity of MOFs onto composite fibers, the Oswald maturation and particle distribution issues of Cu nanoparticles are settled, and the efficient electron transport pathways are established by the bead-like structure of the fiber matrix. Compared to prepared conventional Cu/C nanocomposite fibers, the MOF template-assisted strategy stimulates a remarkable leap in EMW absorption performance. The minimum reflection loss value of Cu/C-40 can reach -64.5 dB, 15.96 times lower than that of a conventional sample (Cu/C-2). The maximum effective absorption bandwidth extends to 6.08 GHz, contrasting the ineffective performance of Cu/C-2. Systematic research demonstrates that the enabled graphite-catalytic function of Cu nanoparticles collaborated with an optimized conductive network structure plays a pivotal role in creating field-induced leakage currents, facilitating conductive loss, the primary contributor to EMW dissipation. This work establishes a correlation mechanism between micromorphology and EMW loss, presenting a compelling example of customizable carbon fiber-based absorbers.

3D-Printed MOF Monoliths: Fabrication Strategies and Environmental Applications

Metal-organic frameworks (MOFs) have been extensively considered as one of the most promising types of porous and crystalline organic-inorganic materials, thanks to their large specific surface area, high porosity, tailorable structures and compositions, diverse functionalities, and well-controlled pore/size distribution. However, most developed MOFs are in powder forms, which still have some technical challenges, including abrasion, dustiness, low packing densities, clogging, mass/heat transfer limitation, environmental pollution, and mechanical instability during the packing process, that restrict their applicability in industrial applications. Therefore, in recent years, attention has focused on techniques to convert MOF powders into macroscopic materials like beads, membranes, monoliths, gel/sponges, and nanofibers to overcome these challenges.Three-dimensional (3D) printing technology has achieved much interest because it can produce many high-resolution macroscopic frameworks with complex shapes and geometries from digital models. Therefore, this review summarizes the combination of different 3D printing strategies with MOFs and MOF-based materials for fabricating 3D-printed MOF monoliths and their environmental applications, emphasizing water treatment and gas adsorption/separation applications. Herein, the various strategies for the fabrication of 3D-printed MOF monoliths, such as direct ink writing, seed-assisted in-situ growth, coordination replication from solid precursors, matrix incorporation, selective laser sintering, and digital light processing, are described with the relevant examples. Finally, future directions and challenges of 3D-printed MOF monoliths are also presented to better plan future trajectories in the shaping of MOF materials with improved control over the structure, composition, and textural properties of 3D-printed MOF monoliths.

Facile Synthesis of Novel Magnetic Janus Graphene Oxide for Efficient and Recyclable Demulsification of Crude Oil-in-Water Emulsion

Nanoparticles have been widely applied to treat emulsion-containing wastewater in the form of chemical demulsifiers, such as SiO2, Fe3O4, and graphene oxide (GO). Owing to their asymmetric structures and selective adsorption, Janus nanoparticles show greater application potential in many fields. In the present work, the novel magnetic Janus graphene oxide (MJGO) nanoparticle was successfully prepared by grafting magnetic Fe3O4 to the surface of the JGO, and its demulsifying ability to treat a crude oil-in-water emulsion was evaluated. The MJGO structure and its magnetic intensity were verified by Fourier-transform infrared spectra (FTIR), transmission electron microscopy (TEM), X-ray diffraction (XRD), and magnetization saturation (MS) tests. Compared with GO and JGO, MJGO displayed the superior efficiency (>96%) to demulsify the crude oil-in-water emulsion, which can be attributed to the reduced electrostatic repulsion between MJGO and the emulsion droplets. Furthermore, the effects of pH and temperature on the demulsification performance of MJGO were also studied. Lastly, the recyclability of MJGO largely reduced the cost of demulsifiers in separating crude oil and water. The current research presents an efficient and recyclable demulsifier, which provides a new perspective for the structural design of nanomaterials and their application in the field of demulsification.

Intelligent Tunable Wave-Absorbing CNTs/VO2/ANF Composite Aerogels Based on Temperature-Driving

The development of new electromagnetic absorbing materials is the main strategy to address electromagnetic radiation. Once traditional electromagnetic wave-absorbing materials are prepared, it is difficult to dynamically change their electromagnetic wave-absorbing performance. Facing the complexity of the information age and the rapid development of modern radar, it is significant to develop intelligent modulation of electromagnetic wave-absorbing materials. Here, CNTs/VO2/ANF composite aerogels with dynamic frequency tunability and switchable absorption on/off were synthesized. Based on the phase change behavior of VO2, the degree of polarization and interfacial effects of multiple heterogeneous interfaces between VO2 and CNTs and aramid nanofibers (ANFs) were modulated at different temperatures. With the increase in temperature (from 25 to 200 °C), the maximum absorption frequency of the frequency tunable aerogel is modulated from 12.24 to 8.56 GHz in the X-band, and the absorption intensity remains stable. The maximum effective switching bandwidth (ΔEAB) of the wave-absorbing switchable aerogel is 3.70 GHz. This study provides insights into intelligent electromagnetic wave absorption performance and paves the way for temperature-driven application of intelligent modulation of electromagnetic absorbers.

Multi-interfaced Ni/C@RGO/PTFE composites for electromagnetic protection applications with high environmental stability and durability

To efficiently address the growing electromagnetic pollution problem, it is urgently required to research high-performance electromagnetic materials that can effectively absorb or shield electromagnetic waves. In addition, the stability and durability of electromagnetic materials in complex practical environments is also an issue that needs to be noticed. Therefore, the starting point for our problem-solving is how to endow magnetic/dielectric multi-interfaced composite materials with excellent electromagnetic protection capability and environmental stability. In this study, magnetic/dielectric multi-interfaced Ni/carbon@reduced graphene oxide/polytetrafluoroethylene (Ni/C@RGO/PTFE) composites were developed to utilize as excellent EWA (electromagnetic wave absorption) and EMI (electromagnetic interference) shielding materials. Due to their diverse heterogeneous interfaces, rich conductive networks, and multiple loss mechanisms, the Ni/C@RGO/PTFE composite exhibits an optimal reflection loss of -61.48 dB and an effective absorption bandwidth of 7.20 GHz, with a filler loading of 5 wt%. Furthermore, Ni/C@RGO/PTFE composite films have an optimal absorption effectiveness value of 9.50 dB and an absorption coefficient of 0.49. Moreover, Ni/C@RGO/PTFE can hold high EWA performance in various corrosive media and maintain more than 90% of EMI shielding effectiveness, which can be attributed to the carbon coating and PTFE matrix acting as dual protective barriers for the susceptible metal Ni, thus obviously improving the stability and durability of composites. Overall, this work presents an effective strategy for the growth of high-performance EWA and EMI shielding materials with outstanding environmental stability and durability, which have wide application prospects in the future.

The Influence of Retreated Lithium Slag with a High Content of Alkali, Sulfate and Fluoride on the Composition and the Microstructure of Autoclaved Aerated Concrete

In this paper, the possibility of retreated lithium slag (RTLS) with a high content of alkali, sulfate and fluoride as a partial replacement for fly ash (FA) to produce autoclaved aerated concrete (AAC) was investigated. The influence of the RTLS dosage on the AAC performance were examined. The composition and microstructure of hydrates as well as the microstructure of the RTLS-FA-based AAC compositions were determined by XRD, FTIR, TG-DSC and SEM. The results illustrated that the incorporation of RTLS changed the crystal structure and the microstructure of the tobermorite. With increased RTLS contents, the morphology of tobermorite was changed, and the grass-like tobermorite gradually transformed into network-like tobermorite. The newly formed tobermorite improved the mechanical performance of the AAC. Compared with the RTLS10, the content of tobermorite in the RTLS30 increased by 8.6%.

Interface Engineering-Modulated Nanoscale Bimetallic CoFe-MIL-88A In-Situ-Grown on 2D V2CTx MXene for Electrocatalytic Nitrogen Reduction

The electrochemical nitrogen reduction reaction (eNRR) provides a sustainable green development route for the nitrogen-neutral cycle. In this work, bimetallic CoFe-MIL-88A with two active sites (Fe, Co) were immobilized on a 2D V2CTx MXene surface by in situ growth method to achieve the purpose of the control interface. A large number of heterostructures are formed between small CoFe-MIL-88A and V2CTx, which regulate the electron transfer between the catalyst interfaces. The adsorption and activation of nitrogen on the active sites were enhanced, and the NRR reaction kinetics was accelerated. CoFe-MIL-88A is tightly arranged on V2CTx, which makes CoFe-MIL-88A/V2CTx have better hydrophobicity and can significantly inhibit the hydrogen evolution reaction. The synergistic effect of multicatalytic active sites and multi-interface structure of CoFe-MIL-88A/V2CTx MXene is propitious to nitrogen efficiently and stably to convert into ammonia under environmental conditions with superior selectivity and good catalytic activity. The NH3 yield rate is 29.47 μg h-1 mgcat-1 at -0.3 V vs RHE, and the Faradaic efficiency (FE) is 28.86% at -0.1 V vs RHE. The catalytic mechanism was verified to conform to the distal pathway. This work will provide a new way to develop an MXene-based electrocatalyst for eNRR.

Interface-induced dual-pinning mechanism enhances low-frequency electromagnetic wave loss

Improving the absorption of electromagnetic waves at low-frequency bands (2-8 GHz) is crucial for the increasing electromagnetic (EM) pollution brought about by the innovation of the fifth generation (5G) communication technology. However, the poor impedance matching and intrinsic attenuation of material in low-frequency bands hinders the development of low-frequency electromagnetic wave absorbing (EMWA) materials. Here we propose an interface-induced dual-pinning mechanism and establish a magnetoelectric bias interface by constructing bilayer core-shell structures of NiFe2O4 (NFO)@BiFeO3 (BFO)@polypyrrole (PPy). Such heterogeneous interface could induce distinct magnetic pinning of the magnetic moment in the ferromagnetic NFO and dielectric pinning of the dipole rotation in PPy. The establishment of the dual-pinning effect resulted in optimized impedance and enhanced attenuation at low-frequency bands, leading to better EMWA performance. The minimum reflection loss (RLmin) at thickness of 4.43 mm reaches -65.30 dB (the optimal absorption efficiency of 99.99997%), and the effective absorption bandwidth (EAB) can almost cover C-band (4.72 ~ 7.04 GHz) with low filling of 15.0 wt.%. This work proposes a mechanism to optimize low-frequency impedance matching with electromagnetic wave (EMW) loss and pave an avenue for the research of high-performance low-frequency absorbers.

Freeze-Cast Ni-MOF Nanobelts/Chitosan-Derived Magnetic Carbon Aerogels for Broadband Electromagnetic Wave Absorption

The exceptional benefits of carbon aerogels, including their low density and tunable electrical characteristics, infuse new life into the realm of creating ultralight electromagnetic wave absorbers. The clever conceptualization and straightforward production of carbon-based aerogels, which marry aligned microporous architecture with nanoscale heterointerfaces and atomic-scale defects, are vital for effective multiscale microwave response. We present an uncomplicated synthesis method for crafting aligned porous Ni@C nanobelts anchored on N, S-doped carbon aerogels (Ni@C/NSCAs), featuring multiscale structural intricacies─achieved through the pyrolysis of freeze-cast Ni-MOF nanobelts and chitosan aerogel composites. The well-ordered porous configuration, combined with multiple heterointerfaces adopting a "nanoparticles-nanobelts-nanosheets" contact schema, along with a wealth of defects, adeptly modulates conductive, polarization, and magnetic losses to realize an equilibrium in impedance matching. This magnetically doped carbon aerogel showcases an impressive effective absorption bandwidth of 8.96 GHz and a minimum reflection loss of -68.82 dB, while maintaining an exceptionally low filler content of 1.75 wt %. Additionally, the applied coating exhibits an astonishing radar cross-section reduction of 51.7 dB m2, signifying its superior radar wave scattering capabilities. These results offer key insights into the attainment of broad-spectrum microwave absorption features by enhancing the multiscale structure of current aerogels.

Metal-organic frameworks with fine-tuned interlayer spacing for microwave absorption

Designing a functional, conductive metal-organic framework (cMOF) is highly desired. Substantial efforts have been dedicated to increasing the intralayer conjugation of the cMOFs, while less dedication has been made to tuning the interlayer charge transport of the metal-organic nanosheets for the controllable dielectric property. Here, we construct a series of conductive bimetallic organic frameworks of (ZnxCu3-x) (hexahydroxytriphenylene)2 (ZnCu-HHTP) to allow for fine-tuned interlayer spacing of two-dimensional frameworks, by adjusting the ratios of Zn and Cu metal ions. This approach for atomistic interlayer design allows for the finely control of the charge transport, band structure, and dielectric properties of the cMOF. As a result, Zn3Cu1-HHTP, with an optimal dielectric property, exhibits high-efficiency absorption in the gigahertz microwave range, achieving an ultra-strong reflection loss of -81.62 decibels. This study not only advances the understanding of the microstructure-function relationships in cMOFs but also offers a generic nanotechnology-based approach to achieving controllable interlayer spacing in MOFs for the targeted applications.

Thermodynamic and kinetic analysis of the response surface method for phenol removal from aqueous solution using graphene oxide-polyacrylonitrile nanofiber mats

Phenolic compound even at low concentrations, are considered to be priority pollutants due to their significant toxicity. Electrospinning was used to create a polyacrylonitril (PAN) nanofiber, which was then impregnated with graphene oxide (GO). After a preliminary investigation into the electrospinning parameters (e.g., using various voltages and polymer concentrations), the electrospun nanofibres were tuned, this study evaluated the effectiveness of these materials in removing phenolic compounds from wastewater through adsorption. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) were used to analyze the synthesized nanofiber mats. The scanning electron microscopy (SEM) analysis revealed that the structure of nanofiber mats was altered by the addition of graphene oxide (GO) in different ratios. Specifically, the surface of the fibres exhibited increased roughness, and the diameter of the fibres also experienced an increase. The average diameter of the fibres was measured to be (134.9 ± 21.43 nm) for the PAN/2.5% GO composite and (198 ± 33.94 nm) for the PAN/5% GO composite. FTIR spectra of the PAN/GO nanocomposites nanofiber displayed distinct peaks associated with graphene oxide (GO). These included a wide peak at 3400 cm-1, related to the presence of hydroxyl (O-H) groups, as well as peaks on 1600 as well as 1000 cm-1, which indicated the existence of epoxy groups. In this study response surface methodology (RSM) was implemented. To enhance the efficiency of removing substances, it is necessary to optimise parameters such as pH, contact time, and dosage of the adsorbent. The optimum pH for removing phenol via all nanofiber mats was determined to be 7, while at a dose of 2 mg dose adsorbents maximum removals for pure PAN, PAN/2.5 GO, and PAN/5 GO were 61.3941, 77.2118, and 92.76139%, respectively. All the adsorbents obey Langmuir isotherm model, and the empirical adsorption findings were fitted with the second-order model kinetically, also non-linear Elovich model. The maximal monolayer adsorption capacities for PAN, PAN/2.5 GO, and PAN/5 GO were found to be 57.4, 66.18, and 69.7 mg/g, respectively. Thermodynamic studies discovered that the adsorption of phenol on all adsorbents nanofiber mats was exothermic, the adsorption of phenol on nanofiber mats decreases as the temperature increases. All the adsorbents exhibit negative enthalpy and entropy. The PAN/GO composite's superior phenol removal suggested that it could be used as a latent adsorbent for efficient phenol removal from water and wastewater streams.

Hierarchical-Bioinspired MOFs Enhanced Electromagnetic Wave Absorption

Proteins exhibit complex and diverse multi-dimensional structures, along with a wide range of functional groups capable of binding metal ions. By harnessing the unique characteristics of proteins, it is possible to enhance the synthesis of metal-organic frameworks (MOFs) and modify their morphology. Here, the utilization of biomineralized bovine serum albumin (BSA) protein as a template for synthesizing Mil-100 with superior microwave absorption (MA) properties is investigated. The multi-dimensional structure and abundant functional groups of biomineralized BSA protein make it an ideal candidate for guiding the synthesis of Mil-100 with intricate network structures. The BSA@Mil-100 synthesized using this method exhibits exceptional uniformity and monodispersity of nanocrystals. The findings suggest that the BSA protein template significantly influences the regulation of nanocrystal and microstructure formation of Mil-100, resulting in a highly uniform and monodisperse structure. Notably, the synthesized 2-BSA@Mil-100 demonstrates a high reflection loss value of -58 dB at 8.85 GHz, along with a maximum effective absorption bandwidth value of 6.79 GHz, spanning from 6.01 to 12.8 GHz. Overall, this study highlights the potential of utilizing BSA protein as a template for MOF synthesis, offering an effective strategy for the design and development of high-performance MA materials.

Two-Dimensional Cr5Te8@Graphite Heterostructure for Efficient Electromagnetic Microwave Absorption

Two-dimensional (2D) transition metal chalcogenides (TMCs) hold great promise as novel microwave absorption materials owing to their interlayer interactions and unique magnetoelectric properties. However, overcoming the impedance mismatch at the low loading is still a challenge for TMCs due to the restricted loss pathways caused by their high-density characteristic. Here, an interface engineering based on the heterostructure of 2D Cr5Te8 and graphite is in situ constructed via a one-step chemical vapor deposit to modulate impedance matching and introduce multiple attenuation mechanisms. Intriguingly, the Cr5Te8@EG (ECT) heterostructure exhibits a minimum reflection loss of up to - 57.6 dB at 15.4 GHz with a thin thickness of only 1.4 mm under a low filling rate of 10%. The density functional theory calculations confirm that the splendid performance of ECT heterostructure primarily derives from charge redistribution at the abundant intimate interfaces, thereby reinforcing interfacial polarization loss. Furthermore, the ECT coating displays a remarkable radar cross section reduction of 31.9 dB m2, demonstrating a great radar microwave scattering ability. This work sheds light on the interfacial coupled stimulus response mechanism of TMC-based heterogeneous structures and provides a feasible strategy to manipulate high-quality TMCs for excellent microwave absorbers.

Graphene-like structure of bio-carbon with CoFe Prussian blue derivative composites for enhanced microwave absorption

Traditional carbon materials such as graphene are often applied in the field of electromagnetic wave (EMW) absorption but they have unbalanced impedance matching and high conductivity. Bio-carbon with graphene-like structure derived from apples has many advantages over graphene: it can be prepared in large quantities and the abundant heteroatoms present in the lattice can provide many polarization phenomena. Herein, Prussian blue analogue (PBA) as a source of magnetic component was combined with bio-carbon or reduced graphene oxide (rGO) to study the EMW absorption properties. The fabricated BC/CFC-12-7 displayed performance with a minimum reflection loss (RLmin) of -72.57 dB and a wide effective absorption bandwidth (EAB) of 5.25 GHz with an ultra-thin and nearly equal matching thickness at 1.61 mm. The results show that the good EMW absorption property of bio-carbon composites comes from good conduction loss, large relaxation polarization loss especially from pyridinic-N, and better impedance matching. The optimized radar cross section is found to be -33.55 dB m2 in the far-field condition using CST. This work explored the advantages of bio-carbon as a novel EMW absorbing material compared with graphene and provided ideas for realizing high-performance EMW absorbing materials in the future.

Boosting Conductive Loss and Magnetic Coupling Based on "Size Modulation Engineering" toward Lower-Frequency Microwave Absorption

The rational design of absorber size is a promising strategy for obtaining excellent electromagnetic wave (EMW) absorption performance. However, achieving controllable tuning of the material size through simple methods is challenging and the associated EMW attenuation mechanisms are still unclear. In this study, the sizes of metal-organic frameworks (MOFs) are successfully tailored by changing the growth time and the molar ratio of iron (Fe)/organic ligands. The lateral and vertical lengths of MOFs vary in the range of 200 nm to 2 µm and 100 nm to 1 µm, respectively. Both experiments and simulations confirm that the decrease of MOF size favors the formation of more conductive networks, which is beneficial for improving the conductivity loss. Meanwhile, the micromagnetic simulation reveals that the magnetic coupling can be effectively enhanced by the decrease of MOF size, which is conducive to the improvement of magnetic loss, especially in low-frequency range. The reflection loss of Fe-based MOFs with optimized size reaches -46.4 dB at 6.2 GHz with an effective absorption bandwidth of 3.1 GHz. This work illustrates the important role of size effect in EMW dissipation and provides an effective strategy for enhancing the low-frequency EMW absorption performance.

Advances of Electrochemical and Electrochemiluminescent Sensors Based on Covalent Organic Frameworks

Covalent organic frameworks (COFs), a rapidly developing category of crystalline conjugated organic polymers, possess highly ordered structures, large specific surface areas, stable chemical properties, and tunable pore microenvironments. Since the first report of boroxine/boronate ester-linked COFs in 2005, COFs have rapidly gained popularity, showing important application prospects in various fields, such as sensing, catalysis, separation, and energy storage. Among them, COFs-based electrochemical (EC) sensors with upgraded analytical performance are arousing extensive interest. In this review, therefore, we summarize the basic properties and the general synthesis methods of COFs used in the field of electroanalytical chemistry, with special emphasis on their usages in the fabrication of chemical sensors, ions sensors, immunosensors, and aptasensors. Notably, the emerged COFs in the electrochemiluminescence (ECL) realm are thoroughly covered along with their preliminary applications. Additionally, final conclusions on state-of-the-art COFs are provided in terms of EC and ECL sensors, as well as challenges and prospects for extending and improving the research and applications of COFs in electroanalytical chemistry.

Efficient Electromagnetic Wave Absorption and Thermal Infrared Stealth in PVTMS@MWCNT Nano-Aerogel via Abundant Nano-Sized Cavities and Attenuation Interfaces

Pre-polymerized vinyl trimethoxy silane (PVTMS)@MWCNT nano-aerogel system was constructed via radical polymerization, sol-gel transition and supercritical CO2 drying. The fabricated organic-inorganic hybrid PVTMS@MWCNT aerogel structure shows nano-pore size (30-40 nm), high specific surface area (559 m2 g-1), high void fraction (91.7%) and enhanced mechanical property: (1) the nano-pore size is beneficial for efficiently blocking thermal conduction and thermal convection via Knudsen effect (beneficial for infrared (IR) stealth); (2) the heterogeneous interface was beneficial for IR reflection (beneficial for IR stealth) and MWCNT polarization loss (beneficial for electromagnetic wave (EMW) attenuation); (3) the high void fraction was beneficial for enhancing thermal insulation (beneficial for IR stealth) and EMW impedance match (beneficial for EMW attenuation). Guided by the above theoretical design strategy, PVTMS@MWCNT nano-aerogel shows superior EMW absorption property (cover all Ku-band) and thermal IR stealth property (ΔT reached 60.7 °C). Followed by a facial combination of the above nano-aerogel with graphene film of high electrical conductivity, an extremely high electromagnetic interference shielding material (66.5 dB, 2.06 mm thickness) with superior absorption performance of an average absorption-to-reflection (A/R) coefficient ratio of 25.4 and a low reflection bandwidth of 4.1 GHz (A/R ratio more than 10) was experimentally obtained in this work.

Multi-interfacial engineering in the hierarchical self-assembled micro-nano dielectric aerogel for wide-band absorption and low infrared emissivity

Radar-infrared (IR) compatible stealth can satisfy the characteristics of excellent electromagnetic wave attenuation property and low infrared emissivity. However, concurrently satisfying these demands is still a great challenge at present. Herein, multi-interfacial engineering strategy was proposed for the preparation of radar-IR compatible stealth materials. ZnO has a high electron binding energy and a large band gap at room temperature, and doping with sulphide can increase the concentration of unconstrained carriers. Therefore, bimetallic sulphide aerogels loaded with ZnO were prepared by means of carbonization and vulcanization, combined with freeze-drying method. When the filling ratio is 20 %, an absorption bandwidth (fe) of 6.62 GHz at a matching thickness of 2.0 mm and a reduction in IR emissivity from 0.920 to 0.539 in the 8-14 μm band are achieved. This work provides a guidance to design and synthesize high-performance absorbers by multi-interfacial engineering for IR-radar compatible stealth application.

Dual Resonance Behavior and Enhanced Microwave Absorption Performance of Fe3O4@C@MoS2 Composites with Shape Magnetic Anisotropy

Ternary hierarchical Fe3O4@C@MoS2 composites and binary hierarchical Fe3O4@C composites were successfully fabricated by a modified mixed solvothermal method, a self-oxidation polymerization method, and a hydrothermal process. Their magnetic properties and microwave absorption performance were investigated. Dual resonance behavior was observed in the Fe3O4@C@MoS2 composites. One of the resonances was attributed to natural resonance with a resonance frequency of 2.58 GHz, which was much higher than that for Fe3O4 bulk (1.5 GHz). The other originated from the superparamagnetic/ferromagnetic relaxation with a resonance frequency of 12.45 GHz. The minimum reflection loss (RLmin) reached -64.30 dB with a matched thickness of 2.24 mm at 11.64 GHz, and the maximum effective absorption bandwidth (EABmax) covered 6.39 GHz with a matched thickness of 1.89 mm. In addition, the maximum Radar cross section (RCS) reduction value reached 31.90 dB m2 at a scattering angle of 0°. Electron holography analysis confirmed a dense magnetic absorption network in the Fe3O4@C@MoS2 composites. The boost in microwave absorption performance was caused by the synergistic effects of magnetic and dielectric properties owing to the ternary hierarchical structure, shape magnetic anisotropy, and incorporation of 1T/2H MoS2. Besides, the binary hierarchical Fe3O4@C composites also exhibited good absorbing performance caused by natural resonance, with an RLmin of -52.90 dB at 5.80 mm, an EABmax of 5.98 GHz at 3.38 mm, and a relatively high RCS reduction value of 13.04 dB m2 at θ = 20°. This work paves the way for designing multicomponent hierarchical absorbers with broadband and intensive microwave absorption.

In-Situ Fabrication of Sustainable-N-Doped-Carbon-Nanotube-Encapsulated CoNi Heterogenous Nanocomposites for High-Efficiency Electromagnetic Wave Absorption

Developing carbon encapsulated magnetic composites with rational design of microstructure for achieving high-performance electromagnetic wave (EMW) absorption in a facile, sustainable, and energy-efficiency approach is highly demanded yet remains challenging. Here, a type of N-doped carbon nanotube (CNT) encapsulated CoNi alloy nanocomposites with diverse heterostructures are synthesized via the facile, sustainable autocatalytic pyrolysis of porous CoNi-layered double hydroxide/melamine. Specifically, the formation mechanism of the encapsulated structure and the effects of heterogenous microstructure and composition on the EMW absorption performance are ascertained. With the presence of melamine, CoNi alloy emerges its autocatalysis effect to generate N-doped CNTs, leading to unique heterostructure and high oxidation stability. The abundant heterogeneous interfaces induce strong interfacial polarization to EMWs and optimize impedance matching characteristic. Combined with the inherent high conductive and magnetic loss capabilities, the nanocomposites accomplish a high-efficiency EMW absorption performance even at a low filling ratio. The minimum reflection loss of -84.0 dB at the thickness of 3.2 mm and a maximum effective bandwidth of 4.3 GHz are obtained, comparable to the best EMW absorbers. Integrated with the facile, controllable, and sustainable preparation approach of the heterogenous nanocomposites, the work shows a great promise of the nanocarbon encapsulation protocol for achieving lightweight, high-performance EMW absorption materials.

A Review of Nitrogen-Doped Graphene Aerogel in Electromagnetic Wave Absorption

Graphene aerogels (GAs) possess a remarkable capability to absorb electromagnetic waves (EMWs) due to their favorable dielectric characteristics and unique porous structure. Nevertheless, the introduction of nitrogen atoms into graphene aerogels can result in improved impedance matching. In recent years, nitrogen-doped graphene aerogels (NGAs) have emerged as promising materials, particularly when combined with magnetic metals, magnetic oxides, carbon nanotubes, and polymers, forming innovative composite systems with excellent multi-functional and broadband absorption properties. This paper provides a comprehensive summary of the synthesis methods and the EMW absorption mechanism of NGAs, along with an overview of the absorption properties of nitrogen-doped graphene-based aerogels. Furthermore, this study sheds light on the potential challenges that NGAs may encounter. By highlighting the substantial contribution of NGAs in the field of EMW absorption, this study aims to facilitate the innovative development of NGAs toward achieving broadband absorption, lightweight characteristics, and multifunctionality.

Preparation of MoS2/MXene/NC Porous Composite Microspheres with Wrinkled Surface and Their Microwave Absorption Performances

In this paper, a MoS2/MXene/N-doped carbon (NC) porous composite microsphere with a wrinkled surface was designed and constructed. Lithium fluoride exfoliation and lithium-ion etching fabricated two types of 2D assembly elements, MXene (Ti3C2Tx) and MoS2 nanosheets. The two nanosheets were self-assembled by an ultrasonic spray technique with high-temperature reduction, and MoS2/MXene microspheres with 3Dwrinkled shapes were obtained. The coating of the surface NC layer was achieved by the carbonization of a polydopamine (PDA) precursor formed by the self-polymerization of dopamine. The amount of PDA coating and raw material ratio significantly affect the microstructure and electromagnetic wave absorption performance. The optimal MXene to MoS2 mass ratio is 5:1, and the optimal coating time and filler amount are 8 h and 40%. MoS2/MXene/NC composite microspheres exhibit excellent absorption performance with low reflection losses (RLmin) of -52.9 dB at 6.4 GHz and high adequate absorption bandwidths of 5.2 GHz. By adjusting the thickness of the absorber, the full coverage of the C-Ku band (4-18 GHz) can be achieved. As a new composite absorber, it has significant potential applications.

Harnessing Pseudo-Jahn-Teller Disordering of Monoclinic Birnessite for Excited Interfacial Polarization and Local Magnetic Domains

The symmetry in a polymorph is one of the most important elements for determining the inherent lattice nature. The MnO2 host tends to high-symmetry MnO6 octahedra as a result of the electronic structure t2g 3 eg 0 of Mn4+ ions, displaying an ordered structure accompanying with poor polarization loss and limiting its application toward high-performance microwave absorbers. Here, a pseudo-Jahn-Teller (PJT) distortion and PJT disordering design with abundant self-forming interfaces and local magnetic domains in the monoclinic birnessite-MnO2 host is first reported. The PJT distortion can give rise to asymmetric MnO6 octahedra, inducing the formation of interfaces and increased electron spin magnetic moment in the lattice. The resultant birnessite with PJT distortions and PJT disordering delivers an outstanding reflection loss value of -42.5 dB at an ultralow thickness of 1.7 mm, mainly derived from the excited interfacial polarization and magnetic loss. This work demonstrates an effective approach in regulating the lattice structure of birnessite for boosting microwave absorption performance.

State of the art and prospects of Fe3O4/carbon microwave absorbing composites from the dimension and structure perspective

At present, to solve the threat of electromagnetic wave (EMW) radiation pollution to human health, intelligent control and information security, tremendous efforts have been made to manufacture EMW absorbing materials. For ideal microwave absorption materials (MAMs), it is generally necessary not only to pursue strong microwave absorption (MA) over wide effective absorption bandwidth (EAB), but also to take into account the requirements of light weight, thin matching thickness and chemical stability characteristics. It has been found that magnetite (Fe3O4) is the most promising MAM to absorb and dissipate EMW among various absorbers, because of its good mechanical and chemical stability, controllable morphology, high Curie temperature, easy preparation, economy and excellent magnetic properties. However, the application performance of Fe3O4 absorber with single composition is limited by its easy agglomeration, eddy current, high density, and impedance mismatch. In addition, achieving efficient MA metrics with low absorber loading remains a huge challenge. To overcome these limitations, conjugation with dielectric carbon-based materials and special structural designs have been extensively explored as viable solutions to optimize the microwave absorption performance (MAP) of Fe3O4. This paper reviews the recent research progress of Fe3O4/carbon MAMs, and then the influence of dimensions and structures regulations on the MAPs are introduced in detail. Finally, the current existing problems and future development direction of Fe3O4/carbon composites in the field of MA are also presented.

A review on composite strategy of MOF derivatives for improving electromagnetic wave absorption

To address the electromagnetic wave (EMW) pollution issues caused by the development of electronics and wireless communication technology, it is urgent to develop efficient EMW-absorbing materials. With controllable composition, diverse structure, high porosity, and large specific surface area, metal-organic framework (MOF) derivatives have sparked the infinite passion and creativity of researchers in the electromagnetic field. Against the challenges of poor inherent impedance matching and insufficient attenuation capability of pure MOF derivative, designing and developing MOF derivative-based composites by compounding MOF with other materials, such as graphene, CNTs, MXene, and so on, has been an effective strategy for constructing high-efficiency EMW absorbing materials. This review systematically expounds the research progress of MOF derivative-based composite strategies, and discusses the challenges and opportunities faced by MOF derivatives in the field of EMW absorption. This work can provide some good ideas for researchers to design and prepare high-efficiency MOF-based EMW absorbing materials in applications of next-generation electronics and aerospace.

Recent Progress in MOF-Based Electrochemical Sensors for Non-Enzymatic Glucose Detection

In recent years, substantial advancements have been made in the development of enzyme-free glucose sensors utilizing pristine metal-organic frameworks (MOFs) and their combinations. This paper provides a comprehensive exploration of various MOF-based glucose sensors, encompassing monometallic MOF sensors as well as multi-metal MOF combinations. These approaches demonstrate improved glucose detection capabilities, facilitated by the augmented surface area and availability of active sites within the MOF structures. Furthermore, the paper delves into the application of MOF complexes and derivatives in enzyme-free glucose sensing. Derivatives incorporating carbon or metal components, such as carbon cloth synthesis, rGO-MOF composites, and core-shell structures incorporating noble metals, exhibit enhanced electrochemical performance. Additionally, the integration of MOFs with foams or biomolecules, such as porphyrins, enhances the electrocatalytic properties for glucose detection. Finally, this paper concludes with an outlook on the future development prospects of enzyme-free glucose MOF sensors.

Boosting Interfacial Polarization Through Heterointerface Engineering in MXene/Graphene Intercalated-Based Microspheres for Electromagnetic Wave Absorption

Multi-layer 2D material assemblies provide a great number of interfaces beneficial for electromagnetic wave absorption. However, avoiding agglomeration and achieving layer-by-layer ordered intercalation remain challenging. Here, 3D reduced graphene oxide (rGO)/MXene/TiO2/Fe2C lightweight porous microspheres with periodical intercalated structures and pronounced interfacial effects were constructed by spray-freeze-drying and microwave irradiation based on the Maxwell-Wagner effect. Such approach reinforced interfacial effects via defects introduction, porous skeleton, multi-layer assembly and multi-component system, leading to synergistic loss mechanisms. The abundant 2D/2D/0D/0D intercalated heterojunctions in the microspheres provide a high density of polarization charges while generating abundant polarization sites, resulting in boosted interfacial polarization, which is verified by CST Microwave Studio simulations. By precisely tuning the 2D nanosheets intercalation in the heterostructures, both the polarization loss and impedance matching improve significantly. At a low filler loading of 5 wt%, the polarization loss rate exceeds 70%, and a minimum reflection loss (RLmin) of -67.4 dB can be achieved. Moreover, radar cross-section simulations further confirm the attenuation ability of the optimized porous microspheres. These results not only provide novel insights into understanding and enhancing interfacial effects, but also constitute an attractive platform for implementing heterointerface engineering based on customized 2D hierarchical architectures.

Core-shell FeCo@carbon nanocages encapsulated in biomass-derived carbon aerogel: Architecture design and interface engineering of lightweight, anti-corrosion and superior microwave absorption

The development of multifunctional microwave absorbing materials for practical applications in complex environments is a challenging research hotspot. Herein, the core-shell structure FeCo@C nanocages were successfully anchored on the surface of biomass-derived carbon (BDC) from pleurotus eryngii (PE) via freeze-drying and electrostatic self-assembly process, achieving lightweight, anti-corrosive, and excellent absorption properties. The superior versatility benefits from the large specific surface area, high conductivity, three-dimensional cross-linked networks, and appropriate impedance matching characteristics. The as-prepared aerogel realizes a minimum reflection loss (RL_min) of -69.5 dB with a corresponding effective absorption bandwidth (EAB) of 8.6 GHz at 2.9 mm. Simultaneously, the computer simulation technique (CST) further proves that the multifunctional material can dissipate microwave energy in actual applications. More importantly, the special heterostructure of aerogel endows excellent resistance to acid, alkali, salt medium, allowing potential applications of the microwave absorbing materials under complex environmental conditions.

Highly dispersed Co/Co9S8 nanoparticles encapsulated in S, N co-doped longan shell-derived hierarchical porous carbon for corrosion-resistant, waterproof high-performance microwave absorption

It is highly desirable, but challenging to develop multifunctional electromagnetic wave (EMW) absorbing material for practical applications in some harsh environments. Herein, we successfully embedded highly dispersed Co/Co₉S₈ nanoparticles into a three-dimensional (3D) honeycomb porous carbon skeleton (the carbon skeleton is derived from longan shell-derived S, N co-doped porous carbon) as a multifunctional material with outstanding EMW absorption properties, hydrophobicity and corrosion resistance. Its superior versatility is attributed to synergistic effects of the S and N dopants, large specific surface area, abundant carbon defects, and 3D porous characteristics. Minimal reflection loss (RL_min) and efficient absorption bandwidth (EAB) of the optimized material as EMW absorbers can achieve -59.9 dB and 6.8 GHz at a thickness of 2.7 mm, respectively, which are superior to most of the reported carbon-based absorbents. Meanwhile, theoretical simulations of the radar scattering cross section (RCS) further confirm that this multifunctional material has outstanding EMW attenuation performance and actual application potential. In addition, the material possesses strong hydrophobicity (124°) and anti-corrosion properties, expanding the scope of potential applications of microwave absorbers. Therefore, this work provides an effective development strategy for the design of anti-corrosion, super-hydrophobic, and high-performance EMW absorbing materials.

Heterostructure tailoring of carbon nanotubes grown on prismatic NiCo clusters for high-efficiency electromagnetic absorption

The employment of electromagnetic (EM) absorbers integrating elaborate architecture, enhanced microwave absorption and multifunctional features remains a formidable challenge in practical applications including military stealth and incoming 5G electronic information era. Herein, a novel microwave absorber has been fabricated by in-situ growing carbon nanotubes (CNTs) on the prismatic nickel-cobalt (NiCo) clusters derived from Ni-Co layered double hydroxides (NiCo-LDH) via catalytic carbonization of ethyl acetate. The NiCo/CNTs composites with highly porous texture could provide sufficient open space to balance the impedance and introduce magnetic loss mechanism. Accordingly, the absorbers achieved remarkable EM absorption performance with a minimum reflection loss of -46.2 dB at 1.5 mm and broad bandwidth of 5.8 GHz owing to synergistic magnetic-dielectric effects and distinct structural merits. The NiCo/CNTs absorber manifests superior radar wave attenuation by the radar cross section simulation and density functional theory (DFT) was also performed to elucidate the potential mechanisms of the heterostructure formation and performance enhancement in the NiCo/CNTs composites. This work is expected to provide new insights or inspirations to modulate EM properties by rationally designing heterostructure for the elimination of severe EM pollution.

Morphology engineering of defective graphene for microwave absorption

Graphene with abundant defects has been considered as the most lightweight electromagnetic functional materials. Although important, the dominant electromagnetic response of defective graphene with diverse morphologies is rarely the focus of existing research. Herein, the defective graphene with two-dimensional planar structure (2D-ps) and three-dimensional continuous network (3D-cn) morphologies were dexterously designed with 2D mixing and 3D filled systems of polymeric matrix. A comparison between the topologies of defective graphene-based nanofillers and the microwave attenuation behaviors was examined. Defective graphene with 3D-cn morphology can achieve ultralow filling content and broadband absorption, which is attributed to the presence of numerous pore structures that promote impedance matching, induce continuous conduction loss and provide multiple reflection and scattering sites for electromagnetic wave attenuation. Comparatively, by virtue of the increased filling content of 2D-ps, the dielectric losses primarily originate from the dielectric genes, including aggregation-induced-charge transport, abundant defect and dipole polarization, resulting in good microwave absorption at low thickness and low frequency. Therefore, this work provides a pioneering insight into morphology engineering of defective graphene microwave absorbers, and it will guide future exploration of customizing high-performance microwave absorption materials based on graphene-based low-dimensional building blocks.

Fabrication of an Ultralight Ni-MOF-rGO Aerogel with Both Dielectric and Magnetic Performances for Enhanced Microwave Absorption: Microspheres with Hollow Structure Grow onto the GO Nanosheets

An ultralight Ni-MOF-rGO aerogel which possess the merits of not only broad bandwidth and strong absorption but also lightweight and thin matching thickness is fabricated through a hydrothermal treatment, freeze-drying, and annealing procedure. The Ni@C microspheres are dispersed randomly and evenly on the graphene oxide (GO) nanosheets, which can be proved through SEM and TEM results. The electromagnetic parameters of the composite can be adjusted by changing the mass ratio of the MOF and GO to endow the material with both good impedance matching and superior electromagnetic wave absorption performances. Consequently, the resulting composite shows outstanding microwave absorption performance, which achieves strong absorption (-51.19 dB) and broad effective absorption bandwidth (6.32 GHz) with a thickness of 1.9 mm while the filling content is only 2 wt %. In addition, the multiple loss mechanisms of the Ni-MOF-rGO aerogel are illustrated, including conduction loss, dipolar polarization, interfacial polarization, magnetic resonance, and eddy current loss. In a word, the extraordinary microwave absorption performance is ascribed to the synergistic effects of the unique multiple layered structure of GO and the hollow core-shell structure of the Ni@C microsphere. This work demonstrates that the ultralight aerogel with excellent electromagnetic wave absorption performance is a promising strategy for microwave absorption application.