Recreating the tumor microenvironment in a bilayer, hyaluronic acid hydrogel construct for the growth of prostate cancer spheroids

Bioengineered Tumor-Stroma Prostate Cancer In Vitro Models for Screening Therapeutics

Cancer-associated fibroblasts are increasingly recognized to have a high impact on prostate tumor growth and drug resistance. Here, we bioengineered organotypic prostate cancer 3D in vitro models to better understand tumor-stroma interplay, the metabolomic profile underlying such interactions, and their impact on standard-of-care therapeutics performance. The assembly of robust and uniform spheroids was evaluated and compared in monotypic PC-3 and heterotypic microtumors comprised of either a healthy or malignant stroma and prostate cancer cells. Our findings demonstrate that the precise inclusion of prostate cancer stromal elements is crucial to generating robust PC-3 prostate cancer spheroids with reproducible morphology and size. The inclusion of cancer-associated fibroblasts promoted the establishment of more compact microtumors exhibiting characteristic expression of major proteins. Exometabolomic profile analysis also highlighted the impact of stromal cells on tumor models metabolism. The optimized heterotypic spheroids were additionally exploited for screening standard-of-care therapeutics, exhibiting a higher resistance when compared to their monotypic counterparts. Our findings demonstrate that including stromal elements in PC-3 prostate cancer models is crucial for their use as increasingly organotypic testing platforms, being relevant for screening candidate anti-cancer therapeutics and for the discovery of potential combinations with emerging anti-stroma therapies.

TGFβ1 and RGD Cooperatively Regulate SMAD2/3-Mediated Oncogenic Effects in Prostate Cancer Cells in Bio-Orthogonally Constructed Hydrogels

To recapitulate prostate cancer metastasis, DU145 cells were cultured in a hyaluronic acid-based, bio-orthogonally constructed, protease-degradable hydrogels. In the presence of a covalently conjugated integrin-binding peptide (GRGDSP), DU145 cells formed tumoroids and exhibited small protrusions. Upon addition of soluble transforming growth factor beta 1 (TGFβ1), cells underwent morphological changes to form extended interconnected cellular networks. Contrarily, in RGD-free hydrogels, cells maintained spherical structures even in the presence of TGFβ1. In RGD-conjugated hydrogels, TGFβ1 induced nuclear localization of SMAD2/3, upregulating a wide range of TGFβ1 target genes and proteins. Prolonged exposure to TGFβ1 led to matrix remodeling and induced epithelial-to-mesenchymal transition in DU145 cells, with loss of epithelial markers and gain of mesenchymal markers. A pharmacological inhibitor of TGFβRI/ALK5, SB-431542, attenuated TGFβ1-induced morphological changes, abrogated nuclear localization of SMAD2/3, and restored the expression of key epithelial markers. Our findings highlight the cooperative role of TGFβ1 signaling and integrin-binding peptide in the acquisition of an aggressive phenotype and the promotion of tumor progression.

Tumor Spheroids, Tumor Organoids, Tumor Explants, and Tumoroids: What Are the Differences between Them?

Three-dimensional (3D) cell cultures that mimic tumor microenvironment have become an essential tool in cancer research and drug response analysis, significantly enhancing our understanding of tumor biology and advancing personalized medicine. Currently, the most widely mentioned 3D multicellular culture models include spheroids, organoids, tumor explants, and tumoroids. These 3D structures, exploited for various applications, are generated from cancer and non-cancer cells of different origin using multiple techniques. However, despite extensive research and numerous studies, consistent definitions of these 3D culture models are not clearly established. The manuscript provides a comprehensive overview of these models, detailing brief history of their research, unique biological characteristics, advantages, limitations, and specific applications.

Hyaluronan-Based Hydrogels for 3D Modeling of Tumor Tissues

Although routine two-dimensional (2D) cell culture techniques have advanced basic cancer research owing to their simplicity, cost-effectiveness, and reproducibility, they have limitations that necessitate the development of advanced three-dimensional (3D) tumor models that better recapitulate the tumor microenvironment. Various biomaterials have been used to establish these 3D models, enabling the study of cancer cell behavior within different matrices. Hyaluronic acid (HA), a key component of the extracellular matrix (ECM) in tumor tissues, has been widely studied and employed in the development of multiple cancer models. This review first examines the role of HA in tumors, including its function as an ECM component and regulator of signaling pathways that affect tumor progression. It then explores HA-based models for various cancers, focusing on HA as a central component of the 3D matrix and its mobilization within the matrix for targeted studies of cell behavior and drug testing. The tumor models discussed included those for breast cancer, glioblastoma, fibrosarcoma, gastric cancer, hepatocellular carcinoma, and melanoma. The review concludes with a discussion of future prospects for developing more robust and high-throughput HA-based models to more accurately mimic the tumor microenvironment and improve drug testing. Impact Statement This review underscores the transformative potential of hyaluronic acid (HA)-based hydrogels in developing advanced tumor models. By exploring HA's dual role as a critical extracellular matrix component and a regulator of cancer cell dynamics, we highlight its unique contributions to replicating the tumor microenvironment. The recent advancements in HA-based models provide new opportunities for more accurate studies of cancer cell behavior and drug responses. Looking ahead, these innovations pave the way for high-throughput, biomimetic platforms that could revolutionize drug testing and accelerate the discovery of effective cancer therapies.

TempEasy 3D Hydrogel Coculture System Provides Mechanistic Insights into Prostate Cancer Bone Metastasis

Patients diagnosed with advanced prostate cancer (PCa) often experience incurable bone metastases; however, a lack of relevant experimental models has hampered the study of disease mechanisms and the development of therapeutic strategies. In this study, we employed the recently established Temperature-based Easy-separable (TempEasy) 3D cell coculture system to investigate PCa bone metastasis. Through coculturing PCa and bone cells for 7 days, our results showed a reduction in PCa cell proliferation, an increase in neovascularization, and an enhanced metastasis potential when cocultured with bone cells. Additionally, we observed increased cell proliferation, higher stemness, and decreased bone matrix protein expression in bone cells when cocultured with PCa cells. Furthermore, we demonstrated that the stiffness of the extracellular matrix had a negligible impact on molecular responses in both primary (PCa cells) and distant malignant (bone cells) sites. The TempEasy 3D hydrogel coculture system is an easy-to-use and versatile coculture system that provides valuable insights into the mechanisms of cell-cell communication and interaction in cancer metastasis.

Tumor Organoids: The Era of Personalized Medicine

The strategies of future medicine are aimed to modernize and integrate quality approaches including early molecular-genetic profiling, identification of new therapeutic targets and adapting design for clinical trials, personalized drug screening (PDS) to help predict and individualize patient treatment regimens. In the past decade, organoid models have emerged as an innovative in vitro platform with the potential to realize the concept of patient-centered medicine. Organoids are spatially restricted three-dimensional clusters of cells ex vivo that self-organize into complex functional structures through genetically programmed determination, which is crucial for reconstructing the architecture of the primary tissue and organs. Currently, there are several strategies to create three-dimensional (3D) tumor systems using (i) surgically resected patient tissue (PDTOs, patient-derived tumor organoids) or (ii) single tumor cells circulating in the patient's blood. Successful application of 3D tumor models obtained by co-culturing autologous tumor organoids (PDTOs) and peripheral blood lymphocytes have been demonstrated in a number of studies. Such models simulate a 3D tumor architecture in vivo and contain all cell types characteristic of this tissue, including immune system cells and stem cells. Components of the tumor microenvironment, such as fibroblasts and immune system cells, affect tumor growth and its drug resistance. In this review, we analyzed the evolution of tumor models from two-dimensional (2D) cell cultures and laboratory animals to 3D tissue-specific tumor organoids, their significance in identifying mechanisms of antitumor response and drug resistance, and use of these models in drug screening and development of precision methods in cancer treatment.

3D tumor spheroids: morphological alterations a yardstick to anti-cancer drug response

Tumor spheroids are one of the well-characterized 3D culture systems bearing close resemblance to the physiological tissue organization and complexity of avascular solid tumor stage with hypoxic core. They hold a wide-spread application in the field of pharmaceutical science and anti-cancer drug research. However, the difficulty in determining optimal technique for the generation of spheroids with uniform size and shape, evaluation of experimental outputs, or mass production often limits their usage in anti-cancer research and in high-throughput drug screening. In recent times, several studies have demonstrated various simple techniques for generating uniform-size 3D spheroids, including the hanging drop (HD), liquid overlay technique (LOT), and microfluidic approaches. Morphological alterations apart from biochemical assays, and staining techniques are suitably employed for the evaluation of experimental outcomes within 3D spheroid models. Morphological alterations in response to effective anti-cancer drug treatment in 3D tumor spheroids such as reduced spheroid size, loss of spheroid compactness and integrity or smooth surface, are highly reliable. These alterations can significantly reduce the need for biochemical assays and staining techniques, resulting in both time and cost savings. The present article specifically covers a variety of available procedures in spheroid generation. For practical applicability, we have supplemented our review study with the generation of glioblastoma U87 spheroids using HD and LOT methods. Additionally, we have also incorporated the outcome of U87 spheroid treatment with doxorubicin on spheroid morphology.

Alternative Non-Mammalian Animal and Cellular Methods for the Study of Host-Fungal Interactions

In the study of fungal pathogenesis, alternative methods have gained prominence due to recent global legislation restricting the use of mammalian animals in research. The principle of the 3 Rs (replacement, reduction, and refinement) is integrated into regulations and guidelines governing animal experimentation in nearly all countries. This principle advocates substituting vertebrate animals with other invertebrate organisms, embryos, microorganisms, or cell cultures. This review addresses host-fungus interactions by employing three-dimensional (3D) cultures, which offer more faithful replication of the in vivo environment, and by utilizing alternative animal models to replace traditional mammals. Among these alternative models, species like Caenorhabditis elegans and Danio rerio share approximately 75% of their genes with humans. Furthermore, models such as Galleria mellonella and Tenebrio molitor demonstrate similarities in their innate immune systems as well as anatomical and physiological barriers, resembling those found in mammalian organisms.

3D-Printed Tumor-on-Chip for the Culture of Colorectal Cancer Microspheres: Mass Transport Characterization and Anti-Cancer Drug Assays

Tumor-on-chips have become an effective resource in cancer research. However, their widespread use remains limited due to issues related to their practicality in fabrication and use. To address some of these limitations, we introduce a 3D-printed chip, which is large enough to host ~1 cm3 of tissue and fosters well-mixed conditions in the liquid niche, while still enabling the formation of the concentration profiles that occur in real tissues due to diffusive transport. We compared the mass transport performance in its rhomboidal culture chamber when empty, when filled with GelMA/alginate hydrogel microbeads, or when occupied with a monolithic piece of hydrogel with a central channel, allowing communication between the inlet and outlet. We show that our chip filled with hydrogel microspheres in the culture chamber promotes adequate mixing and enhanced distribution of culture media. In proof-of-concept pharmacological assays, we biofabricated hydrogel microspheres containing embedded Caco2 cells, which developed into microtumors. Microtumors cultured in the device developed throughout the 10-day culture showing >75% of viability. Microtumors subjected to 5-fluorouracil treatment displayed <20% cell survival and lower VEGF-A and E-cadherin expression than untreated controls. Overall, our tumor-on-chip device proved suitable for studying cancer biology and performing drug response assays.

Recent methods of droplet microfluidics and their applications in spheroids and organoids

Droplet microfluidic techniques have long been known as a high-throughput approach for cell manipulation. The capacity to compartmentalize cells into picolitre droplets in microfluidic devices has opened up a range of new ways to extract information from cells. Spheroids and organoids are crucial in vitro three-dimensional cell culture models that physiologically mimic natural tissues and organs. With the aid of developments in cell biology and materials science, droplet microfluidics has been applied to construct spheroids and organoids in numerous formats. In this article, we divide droplet microfluidic approaches for managing spheroids and organoids into three categories based on the droplet module format: liquid droplet, microparticle, and microcapsule. We discuss current advances in the use of droplet microfluidics for the generation of tumour spheroids, stem cell spheroids, and organoids, as well as the downstream applications of these methods in high-throughput screening and tissue engineering.

HYDRHA: Hydrogels of hyaluronic acid. New biomedical approaches in cancer, neurodegenerative diseases, and tissue engineering

In the last decade, hyaluronic acid (HA) has attracted an ever-growing interest in the biomedical engineering field as a biocompatible, biodegradable, and chemically versatile molecule. In fact, HA is a major component of the extracellular matrix (ECM) and is essential for the maintenance of cellular homeostasis and crosstalk. Innovative experimental strategies in vitro and in vivo using three-dimensional (3D) HA systems have been increasingly reported in studies of diseases, replacement of tissue and organ damage, repairing wounds, and encapsulating stem cells for tissue regeneration. The present work aims to give an overview and comparison of recent work carried out on HA systems showing advantages, limitations, and their complementarity, for a comprehensive characterization of their use. A special attention is paid to the use of HA in three important areas: cancer, diseases of the central nervous system (CNS), and tissue regeneration, discussing the most innovative experimental strategies. Finally, perspectives within and beyond these research fields are discussed.

Three-dimensional in vitro culture models in oncology research

Cancer is a multifactorial disease that is responsible for 10 million deaths per year. The intra- and inter-heterogeneity of malignant tumors make it difficult to develop single targeted approaches. Similarly, their diversity requires various models to investigate the mechanisms involved in cancer initiation, progression, drug resistance and recurrence. Of the in vitro cell-based models, monolayer adherent (also known as 2D culture) cell cultures have been used for the longest time. However, it appears that they are often less appropriate than the three-dimensional (3D) cell culture approach for mimicking the biological behavior of tumor cells, in particular the mechanisms leading to therapeutic escape and drug resistance. Multicellular tumor spheroids are widely used to study cancers in 3D, and can be generated by a multiplicity of techniques, such as liquid-based and scaffold-based 3D cultures, microfluidics and bioprinting. Organoids are more complex 3D models than multicellular tumor spheroids because they are generated from stem cells isolated from patients and are considered as powerful tools to reproduce the disease development in vitro. The present review provides an overview of the various 3D culture models that have been set up to study cancer development and drug response. The advantages of 3D models compared to 2D cell cultures, the limitations, and the fields of application of these models and their techniques of production are also discussed.

Multiple Cell Cultures for MRI Analysis

Magnetic resonance imaging (MRI) is an imaging method that enables diagnostics. In recent years, this technique has been widely used for research using cell cultures used in pharmaceutical science to understand the distribution of various drugs in a variety of biological samples, from cellular models to tissues. MRI's dynamic development in recent years, in addition to diagnostics, has allowed the method to be implemented to assess response to applied therapies. Conventional MRI imaging provides anatomical and pathological information. Due to advanced technology, MRI provides physiological information. The use of cell cultures is very important in the process of testing new synthesized drugs, cancer research, and stem cell research, among others. Two-dimensional (2D) cell cultures conducted under laboratory conditions, although they provide a lot of information, do not reflect the basic characteristics of the tumor. To replicate the tumor microenvironment in science, a three-dimensional (3D) culture of tumor cells was developed. This makes it possible to reproduce in vivo conditions where, in addition, there is a complex and dynamic process of cell-to-cell communication and cell-matrix interaction. In this work, we reviewed current research in 2D and 3D cultures and their use in MRI studies. Articles for each section were collected from PubMed, ScienceDirect, Web of Science, and Google Scholar.

A Tumor Accelerator Based on Multicomponent Bone Scaffolds and Cancer Cell Homing

Bone tissue attracts cancer cell homing biologically, mechanically, or chemically. It is difficult and time consuming to identify their complex cross-talk using existed methods. In this study, a multi-component bone matrix was fabricated using gelatin, hydroxyapatite (HAp), and epidermal growth factor (EGF) as raw materials to investigate how “acellular” bone matrix affects cancer cell homing in bone. Then, EGF-responsive cancer cells were cultured with the scaffold in a dynamical bioreactor. For different culture periods, the effects of HAp, gelatin, and EGF on the cell adhesion, proliferation, 3D growth, and migration of cancer were evaluated. The results indicated that a small amount of calcium ion released from the scaffolds accelerated cancer MDA-MB-231 adhesion on the surface of inner pores. Moreover, degradable gelatin key caused cancer cell growth on the scaffold surface to turn into a 3D aggregation. Despite this, the formation of cancer spheroids was slow, and required 14 days of dynamic culture. Thankfully, EGF promoted cancer cell adhesion, proliferation, and migration, and cancer spheroids were observed only after 3-day culture. We concluded that the combination of the multiple components in this scaffold allows cancer cells to meet multiple requirements of cancer dynamic progression.

3D Printed Solutions for Spheroid Engineering and Cancer Research

In multicellular organisms, cells are organized in a 3-dimensional framework and this is essential for organogenesis and tissue morphogenesis. Systems to recapitulate 3D cell growth are therefore vital for understanding development and cancer biology. Cells organized in 3D environments can evolve certain phenotypic traits valuable to physiologically relevant models that cannot be accessed in 2D culture. Cellular spheroids constitute an important aspect of in vitro tumor biology and they are usually prepared using the hanging drop method. Here a 3D printed approach is demonstrated to fabricate bespoke hanging drop devices for the culture of tumor cells. The design attributes of the hanging drop device take into account the need for high-throughput, high efficacy in spheroid formation, and automation. Specifically, in this study, custom-fit, modularized hanging drop devices comprising of inserts (Q-serts) were designed and fabricated using fused filament deposition (FFD). The utility of the Q-serts in the engineering of unicellular and multicellular spheroids-synthetic tumor microenvironment mimics (STEMs)—was established using human (cancer) cells. The culture of spheroids was automated using a pipetting robot and bioprinted using a custom bioink based on carboxylated agarose to simulate a tumor microenvironment (TME). The spheroids were characterized using light microscopy and histology. They showed good morphological and structural integrity and had high viability throughout the entire workflow. The systems and workflow presented here represent a user-focused 3D printing-driven spheroid culture platform which can be reliably reproduced in any research environment and scaled to- and on-demand. The standardization of spheroid preparation, handling, and culture should eliminate user-dependent variables, and have a positive impact on translational research to enable direct comparison of scientific findings.

3D Cell Cultures: Evolution of an Ancient Tool for New Applications

Recently, research is undergoing a drastic change in the application of the animal model as a unique investigation strategy, considering an alternative approach for the development of science for the future. Although conventional monolayer cell cultures represent an established and widely used in vitro method, the lack of tissue architecture and the complexity of such a model fails to inform true biological processes in vivo. Recent advances in cell culture techniques have revolutionized in vitro culture tools for biomedical research by creating powerful three-dimensional (3D) models to recapitulate cell heterogeneity, structure and functions of primary tissues. These models also bridge the gap between traditional two-dimensional (2D) single-layer cultures and animal models. 3D culture systems allow researchers to recreate human organs and diseases in one dish and thus holds great promise for many applications such as regenerative medicine, drug discovery, precision medicine, and cancer research, and gene expression studies. Bioengineering has made an important contribution in the context of 3D systems using scaffolds that help mimic the microenvironments in which cells naturally reside, supporting the mechanical, physical and biochemical requirements for cellular growth and function. We therefore speak of models based on organoids, bioreactors, organ-on-a-chip up to bioprinting and each of these systems provides its own advantages and applications. All of these techniques prove to be excellent candidates for the development of alternative methods for animal testing, as well as revolutionizing cell culture technology. 3D systems will therefore be able to provide new ideas for the study of cellular interactions both in basic and more specialized research, in compliance with the 3R principle. In this review, we provide a comparison of 2D cell culture with 3D cell culture, provide details of some of the different 3D culture techniques currently available by discussing their strengths as well as their potential applications.

Evaluation of the Anti-Histoplasma capsulatum Activity of Indole and Nitrofuran Derivatives and Their Pharmacological Safety in Three-Dimensional Cell Cultures

Histoplasma capsulatum is a fungus that causes histoplasmosis. The increased evolution of microbial resistance and the adverse effects of current antifungals help new drugs to emerge. In this work, fifty-four nitrofurans and indoles were tested against the H. capsulatum EH-315 strain. Compounds with a minimum inhibitory concentration (MIC₉₀) equal to or lower than 7.81 µg/mL were selected to evaluate their MIC₉₀ on ATCC G217-B strain and their minimum fungicide concentration (MFC) on both strains. The quantification of membrane ergosterol, cell wall integrity, the production of reactive oxygen species, and the induction of death by necrosis–apoptosis was performed to investigate the mechanism of action of compounds 7, 11, and 32. These compounds could reduce the extracted sterol and induce necrotic cell death, similarly to itraconazole. Moreover, 7 and 11 damaged the cell wall, causing flaws in the contour (11), or changing the size and shape of the fungal cell wall (7). Furthermore, 7 and 32 induced reactive oxygen species (ROS) formation higher than 11 and control. Finally, the cytotoxicity was measured in two models of cell culture, i.e., monolayers (cells are flat) and a three-dimensional (3D) model, where they present a spheroidal conformation. Cytotoxicity assays in the 3D model showed a lower toxicity in the compounds than those performed on cell monolayers. Overall, these results suggest that derivatives of nitrofurans and indoles are promising compounds for the treatment of histoplasmosis.

Polymeric Hydrogels for In Vitro 3D Ovarian Cancer Modeling

Ovarian cancer (OC) grows and interacts constantly with a complex microenvironment, in which immune cells, fibroblasts, blood vessels, signal molecules and the extracellular matrix (ECM) coexist. This heterogeneous environment provides structural and biochemical support to the surrounding cells and undergoes constant and dynamic remodeling that actively promotes tumor initiation, progression, and metastasis. Despite the fact that traditional 2D cell culture systems have led to relevant medical advances in cancer research, 3D cell culture models could open new possibilities for the development of an in vitro tumor microenvironment more closely reproducing that observed in vivo. The implementation of materials science and technology into cancer research has enabled significant progress in the study of cancer progression and drug screening, through the development of polymeric scaffold-based 3D models closely recapitulating the physiopathological features of native tumor tissue. This article provides an overview of state-of-the-art in vitro tumor models with a particular focus on 3D OC cell culture in pre-clinical studies. The most representative OC models described in the literature are presented with a focus on hydrogel-based scaffolds, which guarantee soft tissue-like physical properties as well as a suitable 3D microenvironment for cell growth. Hydrogel-forming polymers of either natural or synthetic origin investigated in this context are described by highlighting their source of extraction, physical-chemical properties, and application for 3D ovarian cancer cell culture.

Recent Advances in Three-Dimensional Stem Cell Culture Systems and Applications

Cell culture is one of the most core and fundamental techniques employed in the fields of biology and medicine. At present, although the two-dimensional cell culture method is commonly used in vitro, it is quite different from the cell growth microenvironment in vivo. In recent years, the limitations of two-dimensional culture and the advantages of three-dimensional culture have increasingly attracted more and more attentions. Compared to two-dimensional culture, three-dimensional culture system is better to realistically simulate the local microenvironment of cells, promote the exchange of information among cells and the extracellular matrix (ECM), and retain the original biological characteristics of stem cells. In this review, we first present three-dimensional cell culture methods from two aspects: a scaffold-free culture system and a scaffold-based culture system. The culture method and cell characterizations will be summarized. Then the application of three-dimensional cell culture system is further explored, such as in the fields of drug screening, organoids and assembloids. Finally, the directions for future research of three-dimensional cell culture are stated briefly.

Photo-crosslinked hyaluronic acid hydrogel as a biomimic extracellular matrix to recapitulate in vivo features of breast cancer cells

2D cell culture is widely utilized to develop anti-cancer drugs and to explore the mechanisms of cancer tumorigenesis and development. However, the findings obtained from 2D culture often fail to provide guidance for clinical tumor treatments since it cannot precisely replicate the features of real tumors. 3D tumor models capable of recapitulating native tumor microenvironments have been proved to be a promising alternative technique. Herein, we constructed a breast tumor model from novel hyaluronic acid (HA) hydrogel which was prepared through photocrosslinking of methacrylated HA. The hydrogel was used as a biomimetic extracellular matrix to incubate MCF-7 cells. It was found that methacrylation degree had great effects on hydrogel's microstructure, mechanical performances, and liquid-absorbing and degradation abilities. Optimized hydrogel exhibited highly porous morphology, high equilibrium swelling ratio, suitable mechanical properties, and hyaluronidase-responsive degradation behavior. The results demonstrated that the HA hydrogel facilitated MCF-7 cell proliferation and growth in an aggregation manner. Furthermore, 3D-cultured MCF-7 cells not only up-regulated the expression of VEGF, bFGF and interleukin-8 but exhibited greater invasion and tumorigenesis capabilities compared with 2D-cultured cells. Therefore, the HA hydrogel is a reliable substitute for tumor model construction.

Impact of bisphenol A (BPA) on cells and tissues at the human materno-fetal interface

Bisphenol A (BPA) is an endocrine disruptor extensively used in the production of polycarbonate plastics and epoxy resins and a component of liquid and food containers. It is a hazard in the prenatal period because of its presence in the placenta, fetal membranes, amniotic fluid, maternal and fetal blood and its ability to cross the placenta and reach the fetus. Estimation of the risk of BPA exposure during in utero life is extremely important in order to prevent complications of pregnancy and fetal growth. This review describes in vitro models of the human materno-fetal interface. It also outlines the effects of BPA at doses indicated as "physiological", namely at the concentrations found in the general population, and at "supraphysiological" and "subphysiological" doses, i.e. above and below the physiological range. This work will help clarify the discrepancies observed in studies on the effects of BPA on human reproduction and pregnancy, and it will be useful for the choice of appropriate in vitro models for future studies aimed at identifying the potential impact of BPA on specific functional processes.

Biomimetic stiffening of cell-laden hydrogels via sequential thiol-ene and hydrazone click reactions

Hydrogels with dynamically tunable crosslinking are invaluable for directing stem cell fate and mimicking a stiffening matrix during fibrosis or tumor development. The increases in matrix stiffness during tissue development are often accompanied by the accumulation of extracellular matrices (e.g., collagen, hyaluronic acid (HA)), a phenomenon that has received little attention in the development of dynamic hydrogels. In this contribution, we present a gelatin-based cell-laden hydrogel system capable of being dynamically stiffened while accumulating HA, a key glycosaminoglycans (GAG) increasingly deposited by stromal cells during tumor progression. Central to this strategy is the synthesis of a dually-modified gelatin macromer - gelatin-norbornene-carbohydrazide (GelNB-CH), which is susceptible to both thiol-norbornene photopolymerization and hydrazone click chemistry. We demonstrate that the crosslinking density of cell-laden thiol-norbornene hydrogels can be dynamically tuned via simple incubation with aldehyde-bearing macromers (e.g., oxidized dextran (oDex) or oHA). The GelNB-CH hydrogel system is highly cytocompatible, as demonstrated by in situ encapsulation of pancreatic cancer cells (PCC) and cancer-associated fibroblasts (CAF). This unique dynamic stiffening scheme provides a platform to study tandem accumulation of HA and elevation in matrix stiffness in the pancreatic tumor microenvironment. STATEMENT OF SIGNIFICANCE: Hydrogels permitting on-demand and secondary crosslinking are ideal for mimicking a stiffening tumor microenvironment (TME). However, none of the current dynamic hydrogels account for both stiffening and accumulation of hyaluronic acid (HA), a major extracellular matrix component increasingly deposited in tumor stromal tissues, including pancreatic ductal adenocarcinoma (PDAC). The current work addresses this gap by developing a dynamic hydrogel system capable of simultaneously increasing stiffness and HA accumulation. This is achieved by a new gelatin macromer permitting sequential thiol-norbornene (for primary network crosslinking) and hydrazone click chemistry (for bioinert or biomimetic stiffening with oxidized dextran (oDex) or oHA, respectively). The results of this study provide new insights into how dynamically changing physicochemical matrix properties guide cancer cell fate processes.

Meet me halfway: Are in vitro 3D cancer models on the way to replace in vivo models for nanomedicine development?

The complexity and diversity of the biochemical processes that occur during tumorigenesis and metastasis are frequently over-simplified in the traditional in vitro cell cultures. Two-dimensional cultures limit researchers' experimental observations and frequently give rise to misleading and contradictory results. Therefore, in order to overcome the limitations of in vitro studies and bridge the translational gap to in vivo applications, 3D models of cancer were developed in the last decades. The three dimensions of the tumor, including its cellular and extracellular microenvironment, are recreated by combining co-cultures of cancer and stromal cells in 3D hydrogel-based growth factors-inclusive scaffolds. More complex 3D cultures, containing functional blood vasculature, can integrate in the system external stimuli (e.g. oxygen and nutrient deprivation, cytokines, growth factors) along with drugs, or other therapeutic compounds. In this scenario, cell signaling pathways, metastatic cascade steps, cell differentiation and self-renewal, tumor-microenvironment interactions, and precision and personalized medicine, are among the wide range of biological applications that can be studied. Here, we discuss a broad variety of strategies exploited by scientists to create in vitro 3D cancer models that resemble as much as possible the biology and patho-physiology of in vivo tumors and predict faithfully the treatment outcome.

Imitating Hypoxia and Tumor Microenvironment with Immune Evasion by Employing Three Dimensional in vitro Cellular Models: Impressive Tool in Drug Discovery

The heterogeneous tumor microenvironment is exceptionally perplexing and not wholly comprehended. Different multifaceted alignments lead to the generation of oxygen destitute situations within the tumor niche that modulate numerous intrinsic tumor microenvironments. Disentangling these communications is vital for scheming practical therapeutic approaches that can successfully decrease tumor allied chemotherapy resistance by utilizing the innate capability of the immune system. Several research groups have concerned with a protruding role for oxygen metabolism along with hypoxia in the immunity of healthy tissue. Hypoxia in addition to hypoxia-inducible factors (HIFs) in the tumor microenvironment plays an important part in tumor progression and endurance. Although numerous hypoxia-focused therapies have shown promising outcomes both in vitro and in vivo these outcomes have not effectively translated into clinical preliminaries. Distinctive cell culture techniques have utilized as an in vitro model for tumor niche along with tumor microenvironment and proficient in more precisely recreating tumor genomic profiles as well as envisaging therapeutic response. To study the dynamics of tumor immune evasion, three-dimensional (3D) cell cultures are more physiologically important to the hypoxic tumor microenvironment. Recent research has revealed new information and insights into our fundamental understanding of immune systems, as well as novel results that have been established as potential therapeutic targets. There are a lot of patented 3D cell culture techniques which will be highlighted in this review. At present notable 3D cell culture procedures in the hypoxic tumor microenvironment, discourse open doors to accommodate both drug repurposing, advancement, and divulgence of new medications and will deliberate the 3D cell culture methods into standard prescription disclosure especially in the field of cancer biology which will be discussing here.

Engineering 3D Cortical Spheroids for an In Vitro Ischemic Stroke Model

Three-dimensional (3D) spheroids composed of brain cells have shown great potential to mimic the pathophysiology of the brain. However, a 3D spheroidal brain-disease model for cerebral ischemia has not been reported. This study investigated an ultralow attachment (ULA) surface-mediated formation of 3D cortical spheroids using primary rat cortical cells to recapitulate the cerebral ischemic responses in stroke by oxygen-glucose deprivation-reoxygenation (OGD-R) treatment. Comparison between two-dimensional (2D) and 3D cell culture models confirmed the better performance of the 3D cortical spheroids as normal brain models. The cortical cells cultured in 3D maintained their healthy physiological morphology of a less activated state and suppressed mRNA expressions of pathological stroke markers, S100B, IL-1β, and MBP, selected based on in vivo stroke model. Interestingly, the spheroids formed on the ULA surface exhibited striking aggregation dynamics involving active cell-substrate interactions, whereas those formed on the agarose surface aggregated passively by the convective flow of the media. Accordingly, ULA spheroids manifested a layered arrangement of neurons and astrocytes with higher expressions of integrin β1, integrin α5, N-cadherin, and fibronectin than the agarose spheroids. OGD-R-induced stroke model of the ULA spheroids successfully mimicked the ischemic response as evidenced by the upregulated mRNA expressions of the key markers for stroke, S100B, IL-1β, and MBP. Our study suggested that structurally and functionally distinct cortical spheroids could be generated by simply tuning the cell-substrate binding activities during dynamic spheroidal formation, which should be an essential factor to consider in establishing a brain-disease model.

Hyaluronic acid-based hydrogels to study cancer cell behaviors

Hyaluronic acid (HA) is a natural polysaccharide and a key component of the extracellular matrix (ECM) in many tissues. Therefore, HA-based biomaterials are extensively utilized to create three dimensional ECM mimics to study cell behaviors in vitro. Specifically, derivatives of HA have been commonly used to fabricate hydrogels with controllable properties. In this review, we discuss the various chemistries employed to fabricate HA-based hydrogels as a tunable matrix to mimic the cancer microenvironment and subsequently study cancer cell behaviors in vitro. These include Michael-addition reactions, photo-crosslinking, carbodiimide chemistry, and Diels-Alder chemistry. The utility of these HA-based hydrogels to examine cancer cell behaviors such as proliferation, migration, and invasion in vitro in various types of cancer are highlighted. Overall, such hydrogels provide a biomimetic material-based platform to probe cell-matrix interactions in cancer cells in vitro and study the mechanisms associated with cancer progression.

3D Modeling of Epithelial Tumors-The Synergy between Materials Engineering, 3D Bioprinting, High-Content Imaging, and Nanotechnology

The current statistics on cancer show that 90% of all human cancers originate from epithelial cells. Breast and prostate cancer are examples of common tumors of epithelial origin that would benefit from improved drug treatment strategies. About 90% of preclinically approved drugs fail in clinical trials, partially due to the use of too simplified in vitro models and a lack of mimicking the tumor microenvironment in drug efficacy testing. This review focuses on the origin and mechanism of epithelial cancers, followed by experimental models designed to recapitulate the epithelial cancer structure and microenvironment, such as 2D and 3D cell culture models and animal models. A specific focus is put on novel technologies for cell culture of spheroids, organoids, and 3D-printed tissue-like models utilizing biomaterials of natural or synthetic origins. Further emphasis is laid on high-content imaging technologies that are used in the field to visualize in vitro models and their morphology. The associated technological advancements and challenges are also discussed. Finally, the review gives an insight into the potential of exploiting nanotechnological approaches in epithelial cancer research both as tools in tumor modeling and how they can be utilized for the development of nanotherapeutics.

Advances in removing mass transport limitations for more physiologically relevant in vitro 3D cell constructs

Spheroids and organoids are promising models for biomedical applications ranging from human disease modeling to drug discovery. A main goal of these 3D cell-based platforms is to recapitulate important physiological parameters of their in vivo organ counterparts. One way to achieve improved biomimetic architectures and functions is to culture cells at higher density and larger total numbers. However, poor nutrient and waste transport lead to low stability, survival, and functionality over extended periods of time, presenting outstanding challenges in this field. Fortunately, important improvements in culture strategies have enhanced the survival and function of cells within engineered microtissues/organs. Here, we first discuss the challenges of growing large spheroids/organoids with a focus on mass transport limitations, then highlight recent tools and methodologies that are available for producing and sustaining functional 3D in vitro models. This information points toward the fact that there is a critical need for the continued development of novel cell culture strategies that address mass transport in a physiologically relevant human setting to generate long-lasting and large-sized spheroids/organoids.

In vitro engineering of a bone metastases model allows for study of the effects of antiandrogen therapies in advanced prostate cancer

While androgen-targeted therapies are routinely used in advanced prostate cancer (PCa), their effect is poorly understood in treating bone metastatic lesions and ultimately results in the development of metastatic castrate resistant prostate cancer (mCRPC). Here, we used an all-human microtissue-engineered model of mineralized metastatic tissue combining human osteoprogenitor cells, 3D printing and prostate cancer cells, to assess the effects of the antiandrogens, bicalutamide, and enzalutamide in this microenvironment. We demonstrate that cancer/bone stroma interactions and antiandrogens drive cancer progression in a mineralized microenvironment. Probing the bone microenvironment with enzalutamide led to stronger cancer cell adaptive responses and osteomimicry than bicalutamide. Enzalutamide presented with better treatment response, in line with enzalutamide delaying time to bone-related events and enzalutamide extending survival in mCRPC. The all-human microtissue-engineered model of mineralized metastatic tissue presented here represents a substantial advance to dissect the role of the bone tumor microenvironment and responses to therapies for mCPRC.

Engineering confining microenvironment for studying cancer metastasis

The physical microenvironment of cells plays a fundamental role in regulating cellular behavior and cell fate, especially in the context of cancer metastasis. For example, capillary deformation can destroy arrested circulating tumor cells while the dense extracellular matrix can form a physical barrier for invading cancer cells. Understanding how metastatic cancer cells overcome the challenges brought forth by physical confinement can help in developing better therapeutics that can put a stop to this migratory stage of the metastatic cascade. Numerous in vivo and in vitro assays have been developed to recapitulate the metastatic processes and study cancer cell migration in a confining microenvironment. In this review, we summarize some of the representative techniques and the exciting new findings. We critically review the advantages, as well as challenges associated with these tools and methodologies, and provide a guide on the applications that they are most suited for. We hope future efforts that push forward our current understanding on metastasis under confinement can lead to novel and more effective diagnostic and therapeutic strategies against this dreaded disease.

Natural and Synthetic Biomaterials for Engineering Multicellular Tumor Spheroids

The lack of in vitro models that represent the native tumor microenvironment is a significant challenge for cancer research. Two-dimensional (2D) monolayer culture has long been the standard for in vitro cell-based studies. However, differences between 2D culture and the in vivo environment have led to poor translation of cancer research from in vitro to in vivo models, slowing the progress of the field. Recent advances in three-dimensional (3D) culture have improved the ability of in vitro culture to replicate in vivo conditions. Although 3D cultures still cannot achieve the complexity of the in vivo environment, they can still better replicate the cell-cell and cell-matrix interactions of solid tumors. Multicellular tumor spheroids (MCTS) are three-dimensional (3D) clusters of cells with tumor-like features such as oxygen gradients and drug resistance, and represent an important translational tool for cancer research. Accordingly, natural and synthetic polymers, including collagen, hyaluronic acid, Matrigel^®, polyethylene glycol (PEG), alginate and chitosan, have been used to form and study MCTS for improved clinical translatability. This review evaluates the current state of biomaterial-based MCTS formation, including advantages and disadvantages of the different biomaterials and their recent applications to the field of cancer research, with a focus on the past five years.

Three-Dimensional Cell Cultures as an In Vitro Tool for Prostate Cancer Modeling and Drug Discovery

In the last decade, three-dimensional (3D) cell culture technology has gained a lot of interest due to its ability to better recapitulate the in vivo organization and microenvironment of in vitro cultured cancer cells. In particular, 3D tumor models have demonstrated several different characteristics compared with traditional two-dimensional (2D) cultures and have provided an interesting link between the latter and animal experiments. Indeed, 3D cell cultures represent a useful platform for the identification of the biological features of cancer cells as well as for the screening of novel antitumor agents. The present review is aimed at summarizing the most common 3D cell culture methods and applications, with a focus on prostate cancer modeling and drug discovery.

Constructing a Biomaterial to Simulate Extracellular Drug Transport in Solid Tumors

Designing an in vitro model of the tumor extracellular microenvironment to screen intratumoral drugs is an active challenge. As recent clinical successes of human intratumoral therapies stimulate research on intratumoral delivery, a need for a 3D tumor model to screen intratumoral therapies arises. When injecting the drug formulation directly into the tumor, the biophysics affecting intratumoral retention must be considered; especially for biologic therapies, which may be dominated by extracellular transport mechanisms. Fibrotic regions in solid tumors are typically rich in collagen I fibers. Using shear rheology, head and neck tumors with higher collagen density show a higher stiffness. Similarly, the stiffness of the hyaluronic acid (HA) hydrogel models is increased by adding collagen fibers to model the bulk biomechanical properties of solid tumors. HA hydrogels are then used as intratumoral injection site simulators to model in vitro the retention of glatiramer acetate (GA) and polyethylene glycol (PEG) administered intratumorally. Both compounds are also injected in murine tumors and retention is studied ex vivo for comparison. Retention of GA in the hydrogels is significantly longer than PEG, analogous to the solid tumors, suggesting the utility of HA hydrogels with collagen I fibers for screening extracellular drug transport after intratumoral administration.

Bioprinting of in vitro tumor models for personalized cancer treatment: a review

Studying biological characteristics of tumors and evaluating the treatment effects require appropriate in vitro tumor models. However, the occurrence, progression, and migration of tumors involve spatiotemporal changes, cell-microenvironment and cell-cell interactions, and signal transmission in cells, which makes the construction of in vitro tumor models extremely challenging. In the past few years, advances in biomaterials and tissue engineering methods, especially development of the bioprinting technology, have paved the way for innovative platform technologies for in vitro cancer research. Bioprinting can accurately control the distribution of cells, active molecules, and biomaterials. Furthermore, this technology recapitulates the key characteristics of the tumor microenvironment and constructs in vitro tumor models with bionic structures and physiological systems. These models can be used as robust platforms to study tumor initiation, interaction with the microenvironment, angiogenesis, motility and invasion, as well as intra- and extravasation. Bioprinted tumor models can also be used for high-throughput drug screening and validation and provide the possibility for personalized cancer treatment research. This review describes the basic characteristics of the tumor and its microenvironment and focuses on the importance and relevance of bioprinting technology in the construction of tumor models. Research progress in the bioprinting of monocellular, multicellular, and personalized tumor models is discussed, and comprehensive application of bioprinting in preclinical drug screening and innovative therapy is reviewed. Finally, we offer our perspective on the shortcomings of the existing models and explore new technologies to outline the direction of future development and application prospects of next-generation tumor models.

Alginate Microencapsulation for Three-Dimensional In Vitro Cell Culture

Advances in microscale 3D cell culture systems have helped to elucidate cellular physiology, understand mechanisms of stem cell differentiation, produce pathophysiological models, and reveal important cell-cell and cell-matrix interactions. An important consideration for such studies is the choice of material for encapsulating cells and associated extracellular matrix (ECM). This Review focuses on the use of alginate hydrogels, which are versatile owing to their simple gelation process following an ionic cross-linking mechanism in situ, with no need for procedures that can be potentially toxic to cells, such as heating, the use of solvents, and UV exposure. This Review aims to give some perspectives, particularly to researchers who typically work more with poly(dimethylsiloxane) (PDMS), on the use of alginate as an alternative material to construct microphysiological cell culture systems. More specifically, this Review describes how physicochemical characteristics of alginate hydrogels can be tuned with regards to their biocompatibility, porosity, mechanical strength, ligand presentation, and biodegradability. A number of cell culture applications are also described, and these are subcategorized according to whether the alginate material is used to homogeneously embed cells, to micropattern multiple cellular microenvironments, or to provide an outer shell that creates a space in the core for cells and other ECM components. The Review ends with perspectives on future challenges and opportunities for 3D cell culture applications.

Heparin-based hydrogel scaffolding alters the transcriptomic profile and increases the chemoresistance of MDA-MB-231 triple-negative breast cancer cells

The tumor microenvironment plays a critical role in the proliferation and chemoresistance of cancer cells. Growth factors (GFs) are known to interact with the extracellular matrix (ECM) via heparin binding sites, and these associations influence cell behavior. In the present study, we demonstrate the ability to define signals presented by the scaffold by pre-mixing growth factors, such as epidermal growth factor, into the heparin-based (HP-B) hydrogel prior to gelation. In the 3D biomimetic microenvironment, breast cancer cells formed spheroids within 24 hours of initial seeding. Despite higher number of proliferating cells in 2D cultures, 3D spheroids exhibited a higher degree of chemoresistance after 72 hours. Further, our RNA sequencing results highlighted the phenotypic changes influenced by solid-phase GF presentation. Wnt/β-catenin and TGF-β signaling were upregulated in the cells grown in the hydrogel, while apoptosis, IL2-STAT5 and PI3K-AKT-mTOR signaling were downregulated. With emerging technologies for precision medicine in cancer, this nature of fine-tuning the microenvironment is paramount for cultivation and downstream characterization of primary cancer cells and rare circulating tumor cells (CTCs), and effective screening of chemotherapeutic agents.

Hyaluronic acid binding to CD44S is indiscriminate of molecular weight

The ubiquitous presence of hyaluronic acid (HA) in the extracellular matrix (ECM) of both healthy and diseased tissues underscores its importance in human physiology. Previous studies suggest that HA can be used as a probe to qualitatively monitor cell surface levels of CD44 and other important HA receptors; however, these studies use mixtures of HA at various molecular weights. Using fluorescently labeled HA, we evaluated the apparent differences of low (25 kilodalton) and high (700 kilodalton) molecular weight HA interacting with breast cancer cell lines of varying levels of CD44. Our results confirm that CD44 expression and the apparent level of HA interaction correlates with molecular weight. Importantly, we show that HA only binds a small fraction of the major CD44 isoform, CD44S, on cell surfaces and that CD44S interactions account for <50% of the total HA bound to cell surfaces. Although increased fluorescence level correlates with higher molecular weight of HA, this appears to be an artifact of chain length and not a result of multivalent binding between HA and CD44S. Accordingly, we verify that HA binding characteristics of cell surfaces is similar to previous artificial membrane models which proposed that HA anchors to CD44S and forms a non-binding corona of HA that extends beyond the surface.

Assessing the Advantages, Limitations and Potential of Human Primary Prostate Epithelial Cells as a Pre-clinical Model for Prostate Cancer Research

Choosing an appropriate cell model(s) is the first decision to be made before starting a new project or programme of study. Here, we address the rationale that can be behind this decision and we summarize the current cell models that are used to study prostate cancer. Researchers face the challenge of choosing a model that recapitulates the complexity and heterogeneity of prostate cancer. The use of primary prostate epithelial cells cultured from patient tissue is discussed, and the necessity for close clinical-academic collaboration in order to do this is highlighted. Finally, a novel quantitative phase imaging technique is described, along with the potential for cell characterization to not only include gene expression and protein markers but also morphological features, cell behaviour and kinetic activity.

Induction of Fibrogenic Phenotype in Human Mesenchymal Stem Cells by Connective Tissue Growth Factor in a Hydrogel Model of Soft Connective Tissue

Scar formation is the typical endpoint of wound healing in adult mammalian tissues. An overactive or prolonged fibrogenic response following injury leads to excessive deposition of fibrotic proteins that promote tissue contraction and scar formation. Although well-defined in the dermal tissue, the progression of fibrosis is less explored in other connective tissues, such as the vocal fold. To establish a physiologically relevant 3D model of loose connective tissue fibrosis, we have developed a synthetic extracellular matrix using hyaluronic acid (HA) and peptidic building blocks carrying complementary functional groups. The resultant network was cell adhesive and protease degradable, exhibiting viscoelastic properties similar to the human vocal fold. Human mesenchymal stem cells (hMSCs) were encapsulated in the HA matrix as single cells or multicellular aggregates and cultured in pro-fibrotic media containing connective tissue growth factor (CTGF) for up to 21 days. hMSCs treated with CTGF-supplemented media exhibited an increased expression of fibrogenic markers and ECM proteins associated with scarring. Incorporation of α-smooth muscle actin into F-actin stress fibers was also observed. Furthermore, CTGF treatment increased the migratory capacity of hMSCs as compared to the CTGF-free control groups, indicative of the development of a myofibroblast phenotype. Addition of an inhibitor of the mitogen-activated protein kinase (MAPK) pathway attenuated cellular expression of fibrotic markers and related ECM proteins. Overall, this study demonstrates that CTGF promotes the development of a fibrogenic phenotype in hMSCs encapsulated within an HA matrix and that the MAPK pathway is a potential target for future therapeutic endeavors towards limiting scar formation in loose connective tissues.

An integrated cell printing system for the construction of heterogeneous tissue models

A new three-dimensional (3D) cell printing system was developed and investigated to organize multiple cells/biomaterials with a control precision within 100 μm. This system can be used for the in vitro construction of heterogeneous tissue models. The proposed printing system was achieved by the integration of extrusion printing and alternating viscous and inertial force jetting (AVIFJ) techniques using dual-nozzle switching. In this technique, hydrogels containing high cell densities were extruded using extrusion printing, while droplets containing single cells were precisely manipulated using AVIFJ. The droplets that contained single cells were at the scale of pico-liters and could be accurately positioned at the micron scale. Stable hydrogel structures with adjustable diameters were also printed, with cell viabilities exceeding 90% after printing. A heterogeneous tumor model that contained spheroids and human umbilical vein endothelial cells (HUVECs) was then constructed using the established integrated cell printing system in a stepwise or simultaneous fashion. HUVEC-loaded droplets were observed to locate around the preformed tumor spheroids as designed. Cells and spheroids in the model maintained high cell viability and sustained growth throughout the culture period. The ELISA results of albumin production also proved that the spheroids maintained increased cellular function during the culture. These results demonstrated the feasibility of this integrated 3D printing system for the engineering of in vitro heterogeneous tissue models for future biological and pathological studies. STATEMENT OF SIGNIFICANCE: Addressing the challenge of multi-scale printing in the construction of heterogeneous tissue models, a new 3D cell printing system was developed to organize cells/biomaterials of a control precision within 100 μm. AVIFJ was integrated with extrusion printing, thereby achieving the construction of cell interactions between single cells and spheroids, the manipulation of single cells in a 3D microenvironment with high accuracy, and the real-time on-demand printing. The printed heterogeneous tumor model maintained cell viability, sustained cell growth, and increased cell function during 7 days of culture. We believed that this work would benefit the production of functional artificial tissues, enabling the construction of more biomimetic cell arrangements and microenvironment to support cell functions.

In-air production of 3D co-culture tumor spheroid hydrogels for expedited drug screening

Three-dimensional (3D) in vitro tumor spheroids are becoming popular as pre-clinical platforms for testing the performance of existing drugs or for discovery of innovative anti-cancer therapeutics. This focus is correlated with in vitro 3D tumor models ability to mimic the multicellular compact structure and spatial architecture of human solid tumors. However, these microphysiological systems generally lack the pre-existence of tumor-ECM, a critical aspect that can affect the overall therapeutic performance and the decision of advancing candidate drugs to later stages of the pipeline. Aiming to face this drawback and mimic tumors-ECM, herein we rapidly fabricated in-air hyaluronan-methacrylate (HA-MA) and gelatin-methacrylate (GelMA) photocrosslinkable 3D spheroid microgels by using superhydrophobic surfaces. These platforms were used for establishing heterotypic 3D co-culture models of prostate cancer cells (PC-3) and human osteoblasts (hOB) to mimic prostate cancer-to-bone metastasis cellular heterogeneity and the tumor-ECM microenvironment. 3D microgel microtumors morphology, size and cell number were easily controlled via digital droplet generation on polystyrene superhydrophobic surfaces and under solvent-free conditions when compared to microfluidics or electrospray. Co-culture 3D microgels formed by 2.5%HA-MA-5%GelMA and 5%HA-MA-5%GelMA ratios showed the highest calcium deposition after 14 days of culture, evidencing osteoblasts viability and the establishment of functional mineralization in the 3D hydrogel matrix. Cisplatin cytotoxicity evaluation showed that 3D microgels are more resistant to platin chemotherapeutics than single or co-culture 3D multicellular spheroid counterparts. Overall, our findings indicate that solvent-free, in-air produced 3D microgel microenvironments are cost-effective and robust tumor mimicking platforms for in vitro high-throughput screening of therapeutics targeted to prostate-to-bone metastasis microenvironments. STATEMENT OF SIGNIFICANCE: The generation of robust microphysiological systems that recapitulate the complexity of the metastatic prostate-to-bone tumor microenvironment is crucial for pre-clinical evaluation of new therapeutics that can eradicate these secondary tumors. In this study, we employed superhydrophobic (SH) surfaces to rapidly fabricate photocrosslinkable hyaluronan-methacrylate/gelatin-methacrylate 3D spheroid microgels for prostate cancer cells and human osteoblasts co-culture models that simultaneously mimic the cellular and ECM tumor components. The use of SH platforms overcomes the issues of standard in-liquid microgel production technologies by providing a robust control over 3D microgels size/morphology and cell-cell co-encapsulation numbers, while avoiding the use of oil-based microgel droplets generation. Overall, SH surfaces allowed a solvent-free, cost-effective, reproducible and adaptable fabrication of heterotypic 3D spherical microgels for high throughput drug screening.

Review on biofabrication and applications of heterogeneous tumor models

Resolving the origin and development of tumor heterogeneity has proven to be a crucial challenge in cancer research. In vitro tumor models have been widely used for both scientific and clinical research. Currently, tumor models based on 2D cell culture, animal models, and 3D cell-laden constructs are widely used. Heterogeneous tumor models, which consist of more than one cell type and mimic cell-cell as well as cell-matrix interactions, are attracting increasing attention. Heterogeneous tumor models can serve as pathological models to study the microenvironment and tumor development such as tumorigenesis, invasiveness, and malignancy. They also provide disease models for drug screening and personalized therapy. In this review, the current techniques, models, and oncological applications regarding 3D heterogeneous tumor models are summarized and discussed.

Spatial Patterning of Molecular Cues and Vascular Cells in Fully Integrated Hydrogel Channels via Interfacial Bioorthogonal Cross-Linking

Fully integrated hydrogel channels were fabricated via interfacial bioorthogonal cross-linking, a diffusion-controlled method for the creation and patterning of synthetic matrices based on the rapid bioorthogonal reaction between s-tetrazines (Tz) and trans-cyclooctene (TCO) dienophiles. Injecting an aqueous solution of a bisTCO cross-linker into a reservoir of tetrazine-modified hyaluronic acid (HA-Tz), while simultaneously drawing the syringe needle through the reservoir, yielded a cross-linked hydrogel channel that was mechanically robust. Fluorescent tags and biochemical signals were spatially patterned into the channel wall through time-dependent perfusion of TCO-conjugated molecules into the lumen of the channel. Different cell populations were spatially encapsulated in the channel wall via temporal alteration of cells in the HA-Tz reservoir. The interfacial approach enabled the spatial patterning of vascular cells, including human abdominal aorta endothelial cells, aortic vascular smooth muscle cells, and aortic adventitial fibroblasts, into the hydrogel channels with high viability and proper morphology in the anatomical order found in human arteries. The bioorthogonal platform does not rely on external triggers and represents the first step toward the engineering of functional and implantable arteries.

A novel ex vivo tumor system identifies Src-mediated invasion and metastasis in mesenchymal tumor cells in non-small cell lung cancer

Lung cancer is the foremost cause of cancer related deaths in the U.S. It is a heterogeneous disease composed of genetically and phenotypically distinct tumor cells surrounded by heterotypic cells and extracellular matrix dynamically interacting with the tumor cells. Research in lung cancer is often restricted to patient-derived tumor specimens, in vitro cell cultures and limited animal models, which fail to capture the cellular or microenvironment heterogeneity of the tumor. Therefore, our knowledge is primarily focused on cancer-cell autonomous aberrations. For a fundamental understanding of lung cancer progression and an exploration of therapeutic options, we focused our efforts to develop an Ex Vivo Tumor platform to culture tumors in 3D matrices, which retains tumor cell heterogeneity arising due to in vivo selection pressure and environmental influences and recapitulate responses of tumor cells to external manipulations. To establish this model, implanted syngeneic murine tumors from a mutant KRAS/p53 model were harvested to yield multicellular tumor aggregates followed by culture in 3D extracellular matrices. Using this system, we identified Src signaling as an important driver of invasion and metastasis in lung cancer and demonstrate that EVTs are a robust experimental tool bridging the gap between conventional in vitro and in vivo models.

Chitosan/hyaluronic acid multilayer films are biocompatible substrate for Wharton's jelly derived stem cells

Background

Discovery of mesenchymal stem cells (MSCs) in various adult human tissues opened the way to new therapeutic strategies involving tissue engineering from these cells. More recently, vascular substitutes have opened the era of vascular engineering by making replacement vessels from purely biological material. The objective of our study was to create a vascular substitute from MSCs using a multilayer polyelectrolyte film based on natural polymers (Chitosan and Hyaluronic Acid).

Methods

Biocompatibility and cellular behavior were evaluated in this study using MSCs from the Wharton's jelly (WJ) of human umbilical cords. WJ-MSCs adherence was assessed and cells morphology was investigated by Scanning Electron Microscopy (SEM) and actin visualization (Phalloidin).

Results

The number of WJ-MSCs seeded on the (CHI/HA)₁₀ films was greater than the number of cells seeded on the collagen, as the spectrophotometric measurement showed a large cell proliferation on (CHI/HA)₁₀ in comparison with collagen. After adhesion, WJ-MSCs showed a fibroblastic morphology on CHI/HA as for control (collagen I). These results were confirmed by cytoskeleton staining.

Conclusions

The biocompatibility of WJ-MSCs and (CHI/HA)₁₀ showed the possibility to combine the use of WJ-MSCs and (CHI/HA)₁₀ films in vascular tissue engineering.

Rapid Bioorthogonal Chemistry Enables in Situ Modulation of the Stem Cell Behavior in 3D without External Triggers

Chemical modification of engineered microenvironments surrounding living cells represents a means for directing cellular behaviors through cell-matrix interactions. Presented here is a temporally controlled method for modulating the properties of biomimetic, synthetic extracellular matrices (ECM) during live cell culture employing the rapid, bioorthogonal tetrazine ligation with trans-cyclooctene (TCO) dienophiles. This approach is diffusion-controlled, cytocompatible, and does not rely on light, catalysts, or other external triggers. Human bone-marrow-derived mesenchymal stem cells (hMSCs) were initially entrapped in a hydrogel prepared using hyaluronic acid carrying sulfhydryl groups (HA-SH) and a hydrophilic polymer bearing both acrylate and tetrazine groups (POM-AT). Inclusion of a matrix metalloprotease (MMP)-degradable peptidic cross-linker enabled hMSC-mediated remodeling of the synthetic environment. The resultant network displayed dangling tetrazine groups for subsequent conjugation with TCO derivatives. Two days later, the stiffness of the matrix was increased by adding chemically modified HA carrying multiple copies of TCO (HA-TCO) to the hMSC growth media surrounding the cell-laden gel construct. In response, cells developed small processes radially around the cell body without a significant alteration of the overall shape. By contrast, modification of the 3D matrix with a TCO-tagged cell-adhesive motif caused the resident cells to undergo significant actin polymerization, changing from a rounded shape to spindle morphology with long cellular processes. After additional 7 days of culture in the growth media, quantitative analysis showed that, at the mRNA level, RGD tagging upregulated cellular expression of MMP1, but downregulated the expression of collagen I/III and tenascin C. RGD tagging, however, was not sufficient to induce the classic osteoblastic, chondrogenic, adipogenic, or fibroblastic/myofibroblastic differentiation. The modular approach allows facile manipulation of synthetic ECM to modulate cell behavior, thus potentially applicable to the engineering of functional tissues or tissue models.