Structural characterization of cell wall pectin fractions in ripe strawberry fruits using AFM

Characterisation of phenolic compounds and polysaccharides in strawberry: Cultivar and harvest effects and their correlation with nectar colour stability

Low colour stability in strawberry nectar during storage led to the study of polyphenols and polysaccharides in fruit and their potential role in colour after processing in relation with cultivar, ripening stage and harvest time. Cultivar had a significant effect on both polyphenols and cell wall polysaccharides. Anthocyanins and proanthocyanidins (PACs), including procyanidin and propelargonidin, were the main polyphenols in strawberry. Ripening and late harvest increased anthocyanin contents and reduced PACs contents whereas changes in other polyphenols were minor. Cell walls were mainly composed of cellulose, highly methylated pectins rich in arabinan and galactan side chains, and xyloglucan. Ripening and late harvest increased the loss of pectin side chains, yet these effects were cultivar-dependent. Overripe samples from late harvest exhibited greater colour stability after nectar production. Strawberries with a high content in anthocyanins, low content of PACs, and with pectins rich in galactose, were correlated with nectars of higher colour stability.

Cobalt polygalacturonates and the pharmacological composition based on them: Preparation, properties and cytotoxicity

The aim of the present study was to obtain new metal complexes of citrus pectin with cobalt ions based on potassium polygalacturonate and to prepare a new pharmacological composition (PC) PGKCo: PGNaCo (1:1) with antitumor activity based on potassium cobalt polygalacturonate (PGKCo) and sodium cobalt polygalacturonate (PGNaCo). The study of the effect of PGKCo, PGNaCo and PC on the cell viability of tumor cell lines of different genesis in vitro showed that the obtained compounds are soluble in water and exhibit selective cytotoxic activity against the tumor cell lines of human lung carcinoma A549, breast adenocarcinoma MCF-7 and cervical carcinoma M-HeLa, with no significant toxic effect on normal human cells. The possible mechanism of action of the investigated PC on M-HeLa cancer cells was investigated. The mechanism of action of PC was found to be associated with cell cycle arrest in the G0/G1 phase and the induction of apoptosis through the mitochondrial pathway. The results obtained indicate the potential for the non-toxic compounds (PGKCo, PGNaCo and PC) to be developed as drugs for the complex treatment of oncologic diseases.

Isolation, characterization and palliative effect of D-gal-induced liver injury of Stropharia rugosoannulata exopolysaccharide

In this study, a homogeneous polysaccharide component, namely SREP-1, was purified from Stropharia rugosoannulata fermentation broth. SREP-1 was identified as a novel water-soluble neutral polysaccharide, with a molecular weight of 9.6 kDa. Monosaccharide composition analysis showed that SREP-1 was composed of glucose, galactose and mannose in a molar ratio of 78.6: 13.6: 7.8. The primary structure was elucidated through FT-IR, methylation analysis and NMR spectroscopy, revealing a backbone of →4)-α-D-Glcp-(1 → and →4,6)-α-D-Glcp-(1 → residues, and →6)-α-D-Galp-(1→, β-D-Manp-(1 → and α-D-Glcp-(→1 residues for the branched chains. Results indicated that SREP-1 possessed an amorphous globular-like structure, good thermally stability and triple-helix conformation in water. In vivo results showed that SREP-1 reversed D-galactose (D-gal)-induced body weight and organ indexes decrease, and alleviated liver damage according to improved histopathology and declined indicators in serum. Amelioration of oxidative stress and abnormal inflammation of aging liver might be due to the elevated nuclear factor-erythroid 2-related factor 2 (Nrf2) expression and decreased that of nuclear factor-κB p65 (NF-κB p65). Interestingly, the beneficial effects of SREP-1 were abolished after pretreatment with antibiotics. Our findings demonstrated that the role of SREP-1 in attenuating aging-related liver injury might involve the regulation of Nrf2-NF-κB signaling pathway and its prebiotic effect.

Structural characterization of a pectin-like polysaccharide from Clematis chinensis Osbeck and its anti-rheumatoid arthritis activity

Clematis chinensis Osbeck is a traditional Chinese medicine to treat rheumatic arthritis (RA). We hypothesized that C. chinensis polysaccharide, as a bioactive ingredient, might have the anti-RA function. However, the structure and bioactivity of C. chinensis polysaccharides are less explored. A pectin-like polysaccharide CCPB-2-2 was isolated from C. chinensis root. The putative chemical structure of CCPB-2-2 was characterized through monosaccharide composition, uronic acid reduction, partial acid hydrolysis, methylation reaction, and nuclear magnetic resonance spectroscopy. CCPB-2-2 was composed of the RG-I domain of the pectin moiety and the non-pectin moiety with a backbone with →3)-β-D-Galp-(1→, →6)-β-D-Galp-(1→, →4)-α-D-GlcAp-(1→, →4)-α-D-Glcp-(1→, →4,6)-α-D-Glcp-(1→, →4)-β-D-Galp-(1→, and →3,6)-α-D-Manp-(1→ residues. Moreover, the anti-RA activity of CCPB-2-2 was evaluated in MH7A cells. CCPB-2-2 could inhibit lipopolysaccharide-induced MH7A cell proliferation, down-regulate the expression of pro-inflammatory factors (interleukin-6, interleukin-8, and interleukin-1 beta) and matrix metalloproteinase genes (matrix metallopeptidase 1 and matrix metallopeptidase 3), regulate apoptosis proteins (B-cell lymphoma-2-associated X and B-cell lymphoma-2) and inhibit cell migration. In conclusion, C. chinensis polysaccharide CCPB-2-2 exhibited great potential as a drug candidate for the treatment of RA, which is worth of further research and development.

Chrysanthemum morifolium Ramat. as a traditional tea material: Unraveling the influence of kill-green process on drying characteristics, phytochemical compounds, and volatile profile

The dried capitulum of chrysanthemums is a traditional material in scented tea, and the kill-green process is a critical step in determining their quality. However, the changes in the physicochemical properties during kill-green and the mechanisms by which these changes affect drying characteristics, metabolic components, and aroma profiles remain unclear. Therefore, this study investigated the changes in water status, polyphenol oxidase and peroxidase activities, and microstructure during high-humidity air impingement kill-green (HHAIK) and steam kill-green (SK), and their effects on drying behavior, color, phytochemicals, and volatile profile of dried chrysanthemums. Results showed that the kill-green process increased the freedom degree of immobile water, reduced the relative content of free water, and induced microstructure alterations, thus enhancing the water diffusion and shortening the subsequent drying time by up to 46.15 %. Compared to SK, HHAIK more rapidly inactivated PPO and POD, causing an improved color profile of dried samples. Dried samples treated with HHAIK for 60 s exhibited higher retention of 9 individual phenolics, total sugar, amino acids, and volatile compounds, thus resulting in higher sensorial acceptance than those treated with SK for 60 s. This study offers theoretical insights and technical support for the future development of high-quality chrysanthemum products.

Transformation of cell wall pectin profile during postharvest ripening process alters drying behavior and regulates the sugar content of dried plums

This study evaluated the effects of postharvest ripening (0-6 days, D0-6) on cell wall pectin profile, infrared-assisted hot air-drying characteristics, and sugar content. Results showed that during postharvest ripening progress, the content of water-soluble pectin (WSP) and chelate-soluble pectin (CSP) increased while the content of Na2CO3-soluble pectin (NSP) and hemicellulose (HC) decreased. In addition, the average molecular weight of WSP increased while the average molecular weight of NSP decreased. Secondly, the drying time of plums with different postharvest ripening periods was in the order: D3 < D4 < D2 < D1 < D0 < D5 < D6. Furthermore, the sugar content of dried plums was mainly influenced by drying time, with three stages of sugar changes observed, tied to moisture content: (1) Sucrose hydrolyzes (50-85%); (2) Fructose and glucose degrade (15-50%); (3) Sorbitol degrades (15-42%). These findings indicate that the transformation of cell wall pectin profile during the postharvest ripening process alters drying behavior and regulates the sugar content of dried plums. CHEMICAL COMPOUNDS STUDIED IN THIS ARTICLE: Galacturonic acid (PubChem CID: 439215); Acetone (PubChem CID: 180); Distilled water (PubChem CID: 962); Trans-1,2-Diaminocyclohexane-N, N, N, N'-tetraacetic acid (PubChem CID: 2723845); Na2CO3 (PubChem CID: 10340); Glucose (PubChem CID: 5793); fructose (PubChem CID: 2723872) sucrose (PubChem CID: 5988) sorbitol (PubChem CID: 5780) and Sodium borohydride (PubChem CID: 4311764).

Evolution and modeling of texture changes and drying kinetics of bamboo shoots under high-humidity air-impingement blanching

This study investigated the effect of hot water blanching (HWB), high-humidity air-impingement blanching (HHAIB), different HHAIB blanching times (2, 4, 6, 8, and 10 min), and different HHAIB blanching temperatures (80, 85, 90, and 95°C) on texture quality, lignin content, weight loss, color, microstructure, and drying kinetics of bamboo shoots. After HWB treatment, the lignin content of bamboo shoots was apparently lower than that of HHAIB and the samples obtained the highest weight loss value of 6.13%. Both the texture values (brittleness and chewiness) and lignin content of bamboo shoots exhibited an overall downward trend as the HHAIB blanching time and blanching temperature increased. Specifically, the lignin content of bamboo shoots decreased from 5.59% to 4.58% with an increase in HHAIB blanching time from 2 to 10 min and dropped from 5.48% to 4.63% as HHAIB blanching temperature increased from 80 to 85°C, respectively. The lignin content was proved to be positively correlated (p < 0.05) with texture attributes (brittleness and chewiness). A second polynomial model was obtained for fitting the variation kinetics of lignin content during thermal processing. Reducing the HHAIB blanching time and blanching temperature would obtain a lower weight loss and a better color performance (ΔE and L*). Additionally, microstructure observation revealed that the distribution density of microchannels initially increased and then decreased with the extension of blanching time, while it continuously became firmer as HHAIB blanching temperature increased. Overall, the optimal processing parameters were achieved under the HHAIB blanching temperature of 85°C for 6 min, ensuring a high-quality performance of bamboo shoot products.

Chitosan-based sustainable packaging and coating technologies for strawberry preservation: A review

Strawberry fruits are popular all over the world due to their rich organoleptic properties and enormous health benefits. However, it is highly susceptible to postharvest spoilage due to various factors, including moisture loss, nutrient oxidation, and microbial spoilage. Recently, various researchers have studied the effect of chitosan-based flexible films and surface coatings on the shelf life of strawberries. Despite various reviews providing general information on the effects of chitosan-based films and coatings on various food products, no review has focused solely on their effects on postharvest preservation and the shelf life of strawberries. The purpose of this review is to summarize the current research on chitosan-based formulations for extending the shelf life of strawberries. Chitosan, a cationic carbohydrate polymer, possesses excellent properties such as film formation, mechanical strength, non-toxicity, biodegradability, edibility, UV-blocking ability, antioxidant activity, and antibacterial functionality, justifying its potential as packaging/coating material for fresh agricultural products, including strawberries. This review covers the various factors responsible for strawberry spoilage and the properties of chitosan that help counteract these factors. Additionally, the advantages of chitosan-based preservation technology compared to existing strawberry preservation methods were explained, efficiency was evaluated, and future research directions were suggested.

Transcriptome analysis integrated with changes in cell wall polysaccharides of different fresh-cut chili pepper cultivars during storage reveals the softening mechanism

Cell wall disassembly and transcriptomic changes during storage of two fresh-cut chili pepper cultivars displaying contrasting softening rates were investigated. Results showed that Hangjiao No. 2 (HJ-2) softened more rapidly than Lafeng No. 3 (LF-3). Compared with LF-3, HJ-2 had a higher content of WSP, more side chains of RG-I in three pectin fractions, and higher activities of PME, PL, and β-Gal at day-0. During storage, HJ-2 showed more markable pectin solubilization, more severe degradation in CSP and NSP, and greater loss of side chains from RG-I in three pectin fractions, which were correlated with increased activities of PG and α-L-Af. Furthermore, the higher up-regulation of PG (LOC107870605, LOC107851416) and α-L-Af (LOC107848776, LOC107856612) were screened in HJ-2. In conclusion, the different softening rate between cultivars was not only due to the fundamental differences in pectin structure but also pectin degradation regulated by related enzymes and gene expression levels.

Development of Hematite Nano Ellipsoids/Pectin Composite Films for Green Packaging Applications

Synthetic packaging materials are known to cause serious environmental and human health problems. Among the eco-friendly biopolymers from nonfood sources that are suitable for packaging applications, pectin is a promising candidate. However, native pectin films (NPF) exhibit poor mechanical strength, high hydrophilicity, and poor gas diffusion barrier properties. These shortcomings offset the advantages of pectin as a potential packaging material. To address these limitations, in this study, hematite nano ellipsoids (HNEs) were incorporated as fillers to reinforce native pectin films. This reinforcement resulted in substantial improvements in the mechanical properties, hydrophobicity, thermal stability, barrier properties, and optical attributes of pectin films. Compared to NPF, the pectin-hematite composite film exhibited a 35% increase in tensile strength, a 30° increase in contact angle, a 6-fold increase in the oxygen diffusion barrier properties, and a 20% increase in the water vapor barrier properties. This study presents a sustainable, biocompatible, and biodegradable packaging solution by capitalizing on eco-friendly biopolymer and nanoparticle engineering.

Structural and rheological properties of diluted alkali soluble pectin from apple and carrot

Pectin, a complex polysaccharide found in plant cell walls, plays a crucial role in various industries due to its functional properties. The diluted alkali-soluble pectin (DASP) fractions that result from the stepwise extraction of apples and carrots were studied to evaluate their structural and rheological properties. Homogalacturonan and rhamnogalacturonan I, in different proportions, were the main pectin domains that composed DASP from both materials. Atomic force microscopy revealed that the molecules of apple DASP were longer and more branched. A persistence length greater than 40 nm indicated that the pectin molecules deposited on mica behaved as stiff molecules. The weight-averaged molar mass was similar for both samples. Intrinsic viscosity values of 194.91 mL·g-1 and 186.79 mL·g-1 were obtained for apple and carrot DASP, respectively. Rheological measurements showed greater structural strength for apple-extracted pectin, whereas carrot pectin was characterized by a higher linear viscoelasticity limit. This comparison showed that the pectin fractions extracted by diluted alkali are structurally different and have different rheological properties depending on their botanical origin. The acquired insights can enhance the customized use of pectin residue and support further investigations in industries relying on pectin applications.

Advances in strawberry postharvest preservation and packaging: A comprehensive review

Strawberries spoil rapidly after harvest due to factors such as the ripening process, weight loss, and, most importantly, microbial contamination. Traditionally, several methods are used to preserve strawberries after harvest and extend their shelf life, including thermal, plasma, radiation, chemical, and biological treatments. Although these methods are effective, they are a concern from the perspective of safety and consumer acceptance of the treated food. To address these issues, more advanced environment-friendly technologies have been developed over the past decades, including modified and controlled atmosphere packaging, active biopolymer-based packaging, or edible coating formulations. This method can not only significantly extend the shelf life of fruit but also solve safety concerns. Some studies have shown that combining two or more of these technologies can significantly extend the shelf life of strawberries, which could significantly contribute to expanding the global supply chain for delicious fruit. Despite the large number of studies underway in this field of research, no systematic review has been published discussing these advances. This review aims to cover important information about postharvest physiology, decay factors, and preservation methods of strawberry fruits. It is a pioneering work that integrates, relates, and discusses all information on the postharvest fate and handling of strawberries in one place. Additionally, commercially used techniques were discussed to provide insight into current developments in strawberry preservation and suggest future research directions in this field of study. This review aims to enrich the knowledge of academic and industrial researchers, scientists, and students on trends and developments in postharvest preservation and packaging of strawberry fruits.

The Isolation, Structural Characterization and Anti-Inflammatory Potentials of Neutral Polysaccharides from the Roots of Isatis indigotica Fort

Polysaccharides have been assessed as a potential natural active component in Chinese herbal medicine with anti-inflammatory properties. However, the complex and indefinite structures of polysaccharides limit their applications. This study explains the structures and anti-inflammatory potentials of three neutral polysaccharides, RIP-A1 (Mw 1.8 × 104 Da), RIP-B1 (Mw 7.4 × 104 Da) and RIP-B2 (Mw 9.3 × 104 Da), which were isolated from the roots of Isatis indigotica Fort. with sequenced ultrafiltration membrane columns, DEAE-52 and Sephadex G-100. The planar structures and microstructures of RIP-A1, RIP-B1 and RIP-B2 were further determined by HPGPC, GC-MS, methylation analysis, FT-IR, SEM and AFM, in which the structure of RIP-A1 was elucidated in detail using 1D/2D NMR. The Raw 264.7 cells were used for the anti-inflammatory activity in vitro. The results showed that RIP-A1, RIP-B1 and RIP-B2 are all neutral polysaccharides, with RIP-A1 having the smallest Mw and the simplest monosaccharide composition of the three. RIP-A1 is mainly composed of Ara and Gal, except for a small quantity of Rha. Its main structure is covered with glycosidic linkages of T-α-Araf, 1,2-α-Rhap, 1,5-α-Araf, T-β-Galp, 1,2,4-α-Rhap, 1,3,5-α-Araf and 1,6-β-Galp with 0.33:0.12:1.02:0.09:0.45:11.41:10.23. RIP-A1 significantly inhibited pro-inflammatory cytokines (NO, TNF-α, IL-6 and IL-1β) and increased anti-inflammatory cytokines (IL-4) in LPS-stimulated RAW 264.7 cells. Moreover, RIP-A1 could significantly inhibit the mRNA expression of TNF-α, IL-6 and L-1β. It could also activate IKK, p65 and IκBα (the components of the NF-κB signaling pathway). In conclusion, the above results show the structural characterization and anti-inflammatory potentials of RIP-A1 as an effective natural anti-inflammatory drug.

Effect of enzymatic modification on the structure and rheological properties of diluted alkali-soluble pectin fraction rich in RG-I

This study focuses on pectin covalently linked in cell walls from two sources, apples and carrots, that was extracted using diluted alkali, and it describes changes in the rheological properties of diluted alkali-soluble pectin (DASP) due to enzymatic treatment. Given DASP's richness of rhamnogalacturonan I (RG-I), RG-I acetyl esterase (RGAE), rhamnogalacturonan endolyase (RGL), and arabinofuranosidase (ABF) were employed in various combinations for targeted degradation of RG-I pectin chains. Enzymatic degradations were followed by structural studies of pectin molecules using atomic force microscopy (AFM) as well as measurements of rheological and spectral properties. AFM imaging revealed a significant increase in the length of branched molecules after incubation with ABF, suggesting that arabinose side chains limit RG-I aggregation. Structural modifications were confirmed by changes in the intensity of bands in the pectin fingerprint and anomeric region on Fourier transform infrared spectra. ABF treatment led to a decrease in the stability of pectic gels, while the simultaneous use of ABF, RGAE, and RGL enzymes did not increase the degree of aggregation compared to the control sample. These findings suggest that the association of pectin chains within the DASP fraction may rely significantly on intermolecular interactions. Two mechanisms are proposed, which involve side chains as short-range attachment points or an extended linear homogalacturonan conformation favoring inter-chain interactions over self-association.

Physicochemical and antioxidant properties of pectin fractions extracted from lemon (Citrus Eureka) peels

Pectin, a natural polysaccharide, holds versatile applications in food and pharmaceuticals. However, there is a need for further exploration into extracting novel functional fractions and characterizing them thoroughly. In this study, a sequential extraction approach was used to obtain three distinct lemon pectin (LP) fractions from lemon peels (Citrus Eureka): LP extracted with sodium acetate (LP-SA), LP extracted with ethylenediaminetetraacetic acid (LP-EDTA), and LP extracted with sodium carbonate and sodium borohydride (LP-SS). Comprehensive analysis revealed low methyl-esterification in all fractions. LP-SA and LP-SS displayed characteristics of rhamnogalacturonan-I type pectin, while LP-EDTA mainly consisted of homogalacturonan pectin. Notably, LP-SA formed self-aggregated particles with rough surfaces, LP-EDTA showed interlocking linear structures with smooth planes, and LP-SS exhibited branch chain structures with smooth surfaces. Bioactivity analysis indicated that LP-SA had significant apparent viscosity and ABTS radical scavenging activity, while both LP-EDTA and LP-SS showed excellent thermal stability according to thermogravimetric analysis (TGA). Furthermore, LP-SS exhibited remarkable gel-forming ability and significant hydroxyl free radicals scavenging activity. In conclusion, this study presents a novel method for extracting various lemon pectin fractions with unique structural and bioactive properties, contributing insights for advanced applications in the food and pharmaceutical sectors.

Effect of exogenous melatonin on antioxidant properties and fruit softening of 'Fengtang' plum fruit (Prunus salicina Lindl.) during storage at room temperature

'Fengtang' plums soften quickly and lose flavor after harvest. This study comprehensively evaluated the effect of exogenous melatonin on the fruit quality of 'Fengtang' plums. According to our findings, exogenous melatonin prevented plum fruit from losing water, delayed the decline in firmness, and preserved a high TSS/TA level. Additionally, exogenous melatonin also enhanced the activity of antioxidant enzymes and increased the non-enzymatic antioxidants, thereby further increasing the antioxidant capacity of plum fruit. Notably, exogenous melatonin delayed the degradation of covalent soluble pectin (CSP), cellulose, and hemicellulose, as well as the rise in water-soluble pectin (WSP) concentration and the activity of cell wall degrading enzymes. Further investigation using atomic force microscopy (AFM) revealed that the chain-like structure of ionic-soluble pectin (ISP) and the self-assembly network structures of CSP were depolymerized, and melatonin treatment retarded the depolymerization of pectin structures. Our results showed that exogenous melatonin preserved the postharvest quality of plum fruits by controlling fruit softness and antioxidant capacity during storage.

Optimization of ultrasound-assisted extraction of Imperata cylindrica polysaccharides and evaluation of its anti-oxidant and amelioration of uric acid stimulated cell apoptosis

An efficient, cost-effective and environmentally friendly ultrasound-assisted hot water method for Imperata cylindrica polysaccharide (ICPs) extraction was developed. According to the response surface results, the optimal ultrasonic time was 85 min, ultrasonic power was 192.75 W, temperature was 90.74 °C, liquid-solid ratio was 26.1, and polysaccharide yield was 28.50 %. The polysaccharide mainly consisted of arabinose (Ara), galactose (Gal), and glucose (Glc), with a molecular weight of 62.3 kDa. Ultrasound-assisted extraction of Imperata cylindrica polysaccharide (UICP) exhibited stronger anti-oxidant activity and ability to ameliorate cellular damage due to uric acid stimulation compared with traditional hot water extraction of Imperata cylindrica polysaccharide (ICPC-b). It also exhibited higher thermal stability, indicating its potential value for applications in the food industry.

In situ sono-rheometric assessment of procaine-loaded calcium pectinate hydrogel for enhanced drug releasing under ultrasound stimulation

Ultrasound (US) triggered alterations in the viscoelastic behavior of the procaine-loaded ionically gelatinized pectin hydrogel matrix, and drug release was observed using a sono-device rheometer. The gel softened immediately upon activation of the ultrasound operated at 43 kHz and remained in a softened state throughout the irradiation. Upon cessation of ultrasound, the gel promptly reverted to its original hardness. This cycle of softening was consistently observed in ionically crosslinked pectin hydrogels, resulting in the promotion of procaine release, particularly with higher US power and lower calcium concentration. As the amount of loaded procaine increased, the gel weakened due to ion exchange with the calcium crosslinker and procaine. The most substantial release efficiency, reaching 82 % with a concentration of 32 μg/ml, was achieved when the hydrogels contained 0.03 % procaine within the gelatinized hydrogel medicine at a calcium concentration of 0.9 M, representing a six-fold increase compared to that without US. Notably, US exposure affected the 3D porous structure and degradation rate, leading to hydrogel collapse and facilitating medicine release. Additionally, the procaine-loaded pectin hydrogels with 0.9 M calcium exhibited improved fibroblast cell viability, indicating non-toxicity compared to those hydrogels prepared at a higher Ca2+ concentration of 2.4 M.

Intelligent flexible manipulator system based on flexible tactile sensing (IFMSFTS) for kiwifruit ripeness classification

BACKGROUND

Consumers all throughout the world enjoy kiwifruit. After harvest, there are as much as 20-25% of kiwifruit lost along the entire industrial chain. An intelligent flexible manipulator system based on flexible tactile sensing (IFMSFTS) was created to automatically and intelligently classify kiwifruit ripeness in order to minimize loss.

RESULT

The flexible manipulator is coupled with the flexible tactile sensor. When kiwifruits are being gripped by the manipulator, the flexible sensor perceives their firmness, and the mapping relationship between firmness and ripeness allows for the prediction and evaluation of the kiwifruit's ripeness. Principal component analysis (PCA) is employed to minimize the dimension of the sample firmness data set. K-Nearest neighbor (KNN) and support vector machine (SVM) classifiers are utilized to train and test the data. The findings indicate that PCA-KNN's classification accuracy is 97.5% and PCA-SVM's classification accuracy is 96.24%. The first is a better fit.

CONCLUSION

IFMSFTS can precisely classify ripeness, effectively address the issue of fruit loss, and realize the sustainable and clean production of fruit by sensing the firmness of kiwifruit and relying on the mapping link between firmness and ripeness. © 2023 Society of Chemical Industry.

New insight into pectic fractions of cell wall: Impact of extraction on pectin structure and in vitro gut fermentation

Pectic polysaccharides modulate gut fermentation ability, which is determined by structural characteristics. In this work, apple pectins were extracted by HCl (HAEP), NaOH (AEP), cellulase (EAEP), and in parallel cell wall pectic fractions were sequentially extracted by water (WEP), chelator (CEP) and NaOH (NEP). The aim is to comprehensively compare the impact of extraction on pectin structure and gut fermentation behavior. Results showed that high content of galacturonic acid (90.65 mol%) and large molecular weight (675 kg/mol) were detected in the HAEP. Molecular morphology of the HAEP presented high linearity, while AEP, EAEP and WEP exhibited compact filamentous structures with highly branched patterns. The AEP was characterized by high yield (33.1 g/100 g d.b.), moderate molecular weight (304 kg/mol) and large extent of rhamnogalacturonan-I region (24.88 %) with low degree of branching (1.77). After in vitro simulated gut fermentation for 24 h, total content of short-chain fatty acid (SCFA) generated with the AEP supplement increased to 36.8 mmol/L, followed by EAEP, HAEP and WEP (25.2, 24.2 and 20.3 mmol/L, respectively). Meanwhile, WEP simultaneously produced the highest ammonia content (22.4 mmol/L). This investigation suggests that the fermentation of AEP produces more beneficial SCFA and less ammonia, thus indicating a better gut fermentation property.

Transcriptome analysis reveals genes related to the synthesis and metabolism of cell wall polysaccharides in goji berry (Lycium barbarum L.) from various regions

BACKGROUND

In goji berries (Lycium barbarum L.), the cell wall properties and ripening environment affect fruit quality and their economic benefits. However, the mechanism underlying the cell wall remains to be fully elucidated.

RESULTS

The results showed that total sugar content was higher in Qinghai berries (13.87%, P < 0.01), whereas cellulose content peaked in Zhongning berries (28%, P < 0.05). Arabinose, galactose, and galacturonic acid were the principal components of the cell wall polysaccharides in goji berries. Among them, the content of galactose in Zhongning was significantly the highest (P < 0.05). Interestingly, we found that highly expressed β-glucosidase and lowly expressed endoglucanase led to cellulose accumulation by RNA-sequencing analysis. The expression analysis results suggested that pectate lyase and pectinesterase enzymes could be major factors related to higher galactose and galacturonic acid contents in Zhongning compared to in Qinghai and Gansu. The starch and sucrose metabolism pathway, pentose and glucuronate interconversions pathway, and galactose metabolism pathway played a significant role in cell wall polysaccharide synthesis and metabolism.

CONCLUSION

In the present study, we aimed to provide some insights into the cell wall on polysaccharide composition, structural features, and gene analysis in goji berries from Zhongning, Qinghai, and Gansu in China. These results might help to clarify the molecular function of the major genes in the cell wall polysaccharides of goji berries and provide a solid foundation for further study. © 2023 Society of Chemical Industry.

Potential role of cell wall pectin polysaccharides, water state, and cellular structure on twice "increase-decrease" texture changes during kohlrabi pickling process

Pickled kohlrabi is a traditional and favored vegetable product in China. During pickling, the hardness, springiness, and chewiness of kohlrabi all experienced a typical change with twice "increase-decrease" trend. However, little is known about its mechanism. In this study, in situ analysis including immunofluorescence, low field nuclear magnetic, and transmission electron microscopy were used to explore the effects of cell wall pectin, water state, and cellular structure on kohlrabi texture changes during pickling. Results revealed that at the early stage, due to the rapid loss of water after three times salting, the cells shrank and the interstitial space reduced, resulting in the first increase on kohlrabi texture. Subsequently, the dehydration-rehydration caused by the first brine processing resulted in the first decrease on kohlrabi texture. Then under the action of PME enzyme, more low-esterified pectin was produced, and chelate-soluble pectin with more branched structure was further formed, leading to another elevation of the sample texture. As the pickling continued, under the combined action of PG and PME, the molecular weight of pectin was decreased and the rigidity of the cell tissue was destroyed, caused kohlrabi texture continued to decline. These researches could provide important information and guidance for better maintaining the texture of pickled vegetables during processing.

Structural analysis and attenuates hyperuricemic nephropathy of dextran from the Imperata cylindrica Beauv. var. major (Nees) C. E. Hubb

ICPC-a was from the Imperata cylindrica with a molecular weight of 45 kDa, which was composed of α-D-1,3-Glcp and α-D-1,6-Glcp. The ICPC-a showed thermal stability, maintaining its structural integrity up to 220°C. X-ray diffraction analysis confirmed its amorphous nature, while scanning electron microscopy revealed a layered morphology. ICPC-a significantly ameliorated uric acid stimulation-induced HK-2 cell injury and apoptosis and reduced uric acid levels in mice with hyperuricemic nephropathy. ICPC-a protected against renal injury by inhibiting lipid peroxidation levels, increasing antioxidant damage and defense levels, inhibiting secretion of pro-inflammatory factors, regulating purine metabolism, PI3K-Akt signaling pathway, NF-κB signaling pathway, inflammatory bowel disease, mTOR signaling pathway, and MAPK signaling pathway. These findings indicate that ICPC-a is a promising natural substance with multiple targets, multiple pathways of action, and without toxicity, making it a valuable subject for further research and development.

Pectin-interactions and the digestive stability of anthocyanins in thermal and non-thermal processed strawberry pulp

This study investigated the digestive stability of anthocyanins (ACNs) and their interaction with three pectin fractions-water-soluble pectin (WSP), cyclohexanetrans-1,2-diamine tetra-acetic acid-soluble pectin (CSP), and sodium carbonate-soluble pectin (NSP)-in strawberry pulp processed by pasteurization (PS), ultrasound (US), electron beam (EB) irradiation, and high pressure (HP). Compared with the control group, the ACNs content increased to the highest level (312.89 mg/mL), but the retention rate of ACNs in the simulated intestine decreased significantly after US treatment. The monosaccharide compositions indicated that the WSP and CSP possessed more homogalacturonan (HG) domains than the NSP, which contains more rhamngalacturonan-I (RG-I) domains. The microstructure of US-treated pectin was damaged and fragmented. Comprehensive analysis showed that the retention rate of ACNs was closely related to the pectin structure, primarily reflected by the degree of linearity and the integrity of structure. These results revealed the structure-activity relationship between ACNs and pectin during pulp processing.

Viscoelastic Analysis of Pectin Hydrogels Regenerated from Citrus Pomelo Waste by Gelling Effects of Calcium Ion Crosslinking at Different pHs

Pectin was extracted from citrus pomelo waste, and the effects of calcium ions (Ca2+) on the gelation and hydrogels properties were investigated over a pH range of 3.2-8 by using viscoelastic analysis. The gelatinization of Ca2+-pectin was examined at concentrations of 0.9, 1.8, 2.4, and 3.6 M of Ca2+ in aqueous pectin solutions of 1%, 2%, 3%, and 4%. The gel transition of Ca2+-pectin solution to hydrogels was determined by measuring the storage modulus (G') and loss modulus (G") under mechanical strain from 0.01 to 100%. In a hydrogel of 3% pectin at Ca2+ = 2.4 M, as pH increased to 7, the G' at 0.01 strain % was 3 × 104 Pa, and 3 × 103 Pa at pH 5, indicating that the crosslinking weakened at acidic pH. Due to the crosslinking between the calcium ions and the ionized carboxylic acid groups of pectin, the resulting hydrogel became stiff. When the mechanical strain % was in the range of 0.01-1%, G' was unchanged and G" was an order of magnitude smaller than G', indicating that the mechanical stress was relieved by the gel. In the range of 1-100%, the gel deformation progressed and both the moduli values were dropped. Collapse from the gel state to the solution state occurred at 1-10 strain %, but the softer hydrogels with G' of 103 Pa had a larger strain % than the stiffer hydrogels with G' of 104 Pa.

Isolation, purification, structural characterization, and hypoglycemic activity assessment of polysaccharides from Hovenia dulcis (Guai Zao)

Hovenia dulcis polysaccharides (HDPs) have a variety of important biological activities associated with potential applications in food engineering, pharmacy science, and health care. Herein, we isolated and purified polysaccharides from H. dulcis. Chemical composition analysis revealed that the purified polysaccharides (HDPs-2A) were composed of different molar ratios of mannose, Rha, GalA, GlcA, Glc, Gal, and Ara and had a molecular weight of 372.91 kDa. The structure of HDPs-2A was assessed by FT-IR, periodate oxidation, Smith degradation, methylation analysis, and NMR, allowing us to determine that the backbone of HDPs-2A is composed primarily of →5)-α-L-Araf-(1→, →5)-α-L-Araf-(1→, →3,5)-α-L-Araf-(1→, →6)-β-D-Galp-(1→, →3,6)-β-D-Galp-(1→, T-β-D-Galp, →3)-β-D-Galp-(1→, and T-α-D-Glcp. The results of atomic force microscopy (AFM) showed that HDPs-2A present an irregular polymer particle morphology in water. X-ray diffraction (XRD) results showed that HDPs-2A have a single crystal structure. Finally, we demonstrated that HDPs-2A have a good therapeutic effect on a rat model of type 2 diabetes.

Structure and functionality of Rhamnogalacturonan I in the cell wall and in solution: A review

Rhamnogalacturonan I (RG-I) belongs to the pectin family and is found in many plant cell wall types at different growth stages. It plays a significant role in cell wall and plant biomechanics and shows a gelling ability in solution. However, it has a significantly more complicated structure than smooth homogalacturonan (HG) and its variability due to plant source and physiological state contributes to the fact that RG-I's structure and function is still not so well known. Since functionality is a product of structure, we present a comprehensive review concerning the chemical structure and conformation of RG-I, its functions in plants and properties in solutions.

Sodium bicarbonate reduces the cooked hardness of lotus rhizome via side chain rearrangement and pectin degradation

In this study, 0.1% (W/V) sodium bicarbonate (SB) solution was used to soften lotus rhizome, and the mechanism was characterized by monoclonal antibodies labeling (mAbs) and atomic force microscopy (AFM). The results showed that the cell wall of lotus rhizome was disintegrated under SB treatment. In addition, the mAbs results revealed that low-esterified homogalacturonan (HG) at the tricellular junction was degraded, the rearrangement of Ara and the interaction between Gal and cellulose may be related to the texture changes. Compared with distilled water treatment, SB treatment reduced the relative content of pectin from 34.1% to 19.1% while increased that of cellulose from 65.9% to 80.9%. AFM results revealed that the height of CSF skeleton decreased from about 32 nm to 1.5 nm. These results clearly demonstrate that cooking with 0.1% SB can soften lotus rhizome through degradation of pectin and arrangement of side chains of rhamnogalacturonan-Ⅰ (RG-Ⅰ).

Structure characterization and lipid-lowering activity of a homogeneous heteropolysaccharide from sweet tea (Rubus Suavissmus S. Lee)

Sweet tea (Rubus Suavissmus S. Lee) is consumed as herbal tea in southwestern China, which has multiple functions such as relieving cough, alleviating allergic responses, and clearing away heat. Here we report the structure and lipid-lowering activity of a sweet tea polysaccharide (STP-60a). STP-60a is a homogeneous heteropolysaccharide with a molecular weight of 9.16 × 10⁴ Da, and composed of rhamnose, arabinose, glucose, galactose and glucuronic acid. The main backbone of STP-60a consists of β-L-Rhap-(1→, →3)-β-D-Galp-(1→, →4)-β-D-Glcp-UA-(1→, →3,6)-β-D-Galp-(1→, →6)-β-D-Galp-(1→, →3)-4-OAc-β-L-Arap-(1→, →3)-α-L-Araf-(1→ and the side chain are α-L-Araf-(1→ and →3)-α-D-Glcp-(1→. Using Caenorhabditis elegans (C. elegans) in a high-sugar diet as a model, we found that STP-60a significantly reduced the fat accumulation in the intestine of C. elegans, and extensively affected lipolysis, fatty acid synthesis and β-oxidation processes. In addition, sbp-1 and nhr-49 were essential for STP-60a to exert a lipid-lowering effect.

Structural properties of diluted alkali-soluble pectin from Pyrus communis L. in water and salt solutions

The self-assembly and gelation of low-methoxyl diluted alkali-soluble pectin (LM DASP) from pear fruit (Pyrus communis L. cv. Conference) was studied in water and salt solutions (NaCl and CaCl₂, constant ionic strength) without pH adjustment at 20 °C. The samples at different LM DASP concentrations were characterized using rheological tests, Fourier-transform infrared spectroscopy, dual-angle dynamic light scattering and atomic force microscopy. LM DASP from pear fruit (Pyrus communis L.) showed gelling ability. The indices (aggregation index and shape factor) based on light scattering may be useful for the characterization of structural changes in polysaccharide suspension, particularly for the determination of a gel point. The results obtained may be important for the food, cosmetic and pharmaceutical industries where pectin is used as a texturizer, an encapsulating agent, a carrier of bioactive substances or a gelling agent.

The viability of complex coacervate encapsulated probiotics during simulated sequential gastrointestinal digestion affected by wall materials and drying methods

The objective of this study was to investigate the impact of protein type (sodium caseinate and pea protein isolate) and protein to sugar beet pectin mixing ratio (5 : 1 and 2 : 1) on complex coacervate formation, as well as the impact of the finishing technology (freeze-drying and spray-drying) for improving the viability of encapsulated Lactobacillus rhamnosus GG (LGG) in complex coacervates during simulated sequential gastrointestinal (GI) digestion. The physicochemical properties of LGG encapsulated microcapsules in liquid and powder form were evaluated. The state diagram and ζ-potential results indicated that pH 3.0 was the optimum pH for coacervate formation in the current systems. Confocal laser scanning microscopy (CLSM), viscoelastic analysis, and Fourier transform infrared spectroscopy (FTIR) confirmed that the gel-like network structure of the complex coacervates was successfully formed between the protein and SBP at pH 3.0 through electrostatic interaction. In terms of physiochemical properties and viability of LGG encapsulated in the microcapsule powder, the drying method played a crucial role on particle size, microstructure and death rate of encapsulated LGG during simulated sequential GI digestion compared to protein type and biopolymer mixing ratio. For example, the microstructure of spray-dried microcapsules exhibited smaller spherical particles with some cavities, whereas the larger particle size of freeze-dried samples showed a porous sponge network structure with larger particle sizes. As a result, spray-dried LGG microcapsules generally had a lower death rate during simulated sequential gastrointestinal digestion compared to their freeze-dried counterparts. Among all samples, spray-dried PPI-SBP microcapsules demonstrated superior performance against cell loss and maintained more than 7.5 log CFU per g viable cells after digestion.

Fruit Characteristics, Peel Nutritional Compositions, and Their Relationships with Mango Peel Pectin Quality

Mango peel, a byproduct from the mango processing industry, is a potential source of food-grade mango peel pectin (MPP). Nonetheless, the influence of fruit physical characteristics and phytochemicals of peels on their correspondent pectin level has never been examined, particularly when high-quality food additives are of commercial need. Subsequently, the ultimate aim of the present study was to comprehend their relationship using chemometric data analyses as part of raw material sourcing criteria. Principal component analysis (PCA) advised that mangoes of 'mahachanok' and 'nam dok mai' could be distinguished from 'chok anan' and 'kaew' on the basis of physiology, peel morphology, and phytochemical characteristics. Only pectin extracted from mango var. 'chok anan' was classified as low-methoxyl type (Mox value ~4%). Using the partial least-squares (PLS) regression, the multivariate correlation between the fruit and peel properties and the degree of esterification (DE) value was reported at R² > 0.9 and Q² > 0.8. The coefficient factors illustrated that yields of byproducts such as seed and total biomass negatively influenced DE values, while they were positively correlated with crude fiber and xylose contents of the peels. Overall, it is interesting to highlight that, regardless of the differences in fruit varieties, the amount of biomass and peel proximate properties can be proficiently applied to establish classification of desirable properties of the industrial MPP.

Aggregation and weak gel formation by pectic polysaccharide homogalacturonan

This study presents a novel model of homogalacturonan (HG) based on the dissipative particle dynamics (DPD). The model was applied to investigate the mechanism of self-aggregation of low-methoxylated homogalacturonan in aqueous solutions in the absence of cations. The coarse-grained model provided new insights into the structural features of HG aggregates and networks in aqueous solutions. Depending on the properties and concentration of polysaccharides, two major patterns of self-assembly were observed for HG - ellipsoidal aggregates and a continuous three-dimensional network. Simulations showed that a decrease in the degree of dissociation of HG results in a higher rate of self-aggregation, as well as facilitating the formation of larger assemblies or thicker nanofilaments depending on the type of final self-assembly. Simulations of polysaccharides of different chain lengths suggested the existence of a structural threshold for the formation of a spatial network for HG consisting of less than 35 GalA units.

Impact of ice structuring protein on myofibrillar protein aggregation behaviour and structural property of quick-frozen patty during frozen storage

The goal of this study was to explore the cryoprotective effect of ice structuring protein (ISP) on the aggregation behaviour and structural changes of myofibrillar protein (MP) from quick-frozen pork patties during frozen storage. Frozen storage causes the formation of large protein aggregates and weakens MP structures. After adding ISP into patties, MP had a more stable aggregation system, which was manifested by a uniform particle size distribution and significantly higher absolute zeta potential (11.71 mV) than the control (9.56 mV) (P < 0.05). Atomic force microscopy results showed that the surface roughness of MP aggregation decreased by 9.78% with ISP after freezing for 180 d. Additionally, compared to patties without ISP, the MP carbonyl content from the ISP-treated patty decreased by 32%, and the free amino content increased by 14.99% during frozen storage. Results from circular dichroism spectroscopy and fluorescence spectroscopy showed that MP secondary and tertiary structure stability in patties improved with ISP. Overall, ISP has the potential to improve MP aggregation and structural stability during frozen storage.

The primary, secondary, and structures of higher levels of pectin polysaccharides

Pectin is a heteropolysaccharide abundant in the cell wall of plants and is obtained mainly from fruit (citrus and apple), thus its properties are particularly prone to changes occurring during ripening process. Properties of pectin depend on the string-like structure (conformation, stiffness) of the molecules that determines their mutual interaction and with the surrounding environment. Therefore, in this review the primary, secondary, and structures of higher levels of pectin chains are discussed in relation to external factors including crosslinking mechanisms. The review shows that the primary structure of pectin is relatively well known, however, we still know little about the conformation and properties of the more realistic systems of higher orders involving side chains, functional groups, and complexes of pectin domains. In particular, there is lack of knowledge on the influence of postharvest changes and extraction method on the primary and secondary structure of pectin that would affect conformation in a given environment and assembly to higher structural levels. Exploring the above-mentioned issues will allow to improve our understanding of pectin functionality and will help to tailor new functionalities for the food industry based on natural but often biologically variable source. The review also demonstrates that atomic force microscopy is a very convenient and adequate tool for the evaluation of pectin conformation since it allows for the relatively straightforward stretching of the pectin molecule in order to measure the force-extension curve which is directly related to its stiffness or flexibility.

A water-soluble selenium-enriched polysaccharide produced by Pleurotus ostreatus: Purification, characterization, antioxidant and antitumor activities in vitro

The development and application of new selenium-enriched polysaccharides has become a critical topic in recent years. In this study, a natural selenium-enriched polysaccharide fraction (Se-POP-21) produced by Pleurotus ostreatus was purified, characterized, and investigated the antioxidant and antitumor activities in vitro. The Se-POP-21 was mainly composed of mannose, glucose, galactose and arabinose, with a molar ratio of 18.01:2.40:26.15:7.34, of which molecular weight was 15,888 Da and the selenium content was 5.31 μg/g. Spectral analysis demonstrated that Se-POP-21 represented a non-triple helix pyranopolysaccharide and selenium occurred in the form of C-O-Se and SeO. Molecular size and morphology studies showed that Se-POP-21 exhibited a spherical shape with a particle size distribution between 100 and 200 nm, even though Se-POP-21 aggregates were also found with a size between 500 and 600 nm. In addition, Se-POP-21 showed strong scavenging capacity to DPPH and hydroxyl radical. More, cell experiments showed that Se-POP-21 could reduce viability of A549, SKOV3, HepG2 and MCF-7 cells, induce apoptosis and inhibit metastasis of A549 cells. A potential mechanism was that Se-POP-21 inhibited the epithelial-to-mesenchymal transition of cancer cells. Se-POP-21 featured no significant effect on normal cells. Se-POP-21 showed great potential to develop into a natural antioxidant or low-toxic antitumor drug.

Rheological characterization of RG-I chicory root pectin extracted by hot alkali and chelators

This work aimed to extract gelatinous chicory root pectin (CRP) and evaluated the rheological behavior of the dispersions and gels. CRP was extracted by citric acid (CEP), alkaline (AEP), ammonium oxalate (OEP) and sodium citrate (SEP). The yield, molecular weight (Mw) and the degree of esterification (DE) of pectin samples varied from 8.8 to 14.8% (w/w), 204 to 336 k Da and 4.0 to 47.4%, respectively. AFM studies showed self-organize on mica of CEP, revealing a random coil conformation due to the interaction of multiple branching, whereas, AEP exhibited long linear filamentous structures. The flow behavior study verified the pseudoplastic character of CEP and SEP at 25 °C, while OEP and AEP belonged to dilatant fluid, besides, a closed hysteresis loop was observed when the CEP concentration increased to 1.5%. OEP gel was thermo insensitive and stiff, AEP gel presented most sensitive to calcium ion but more brittle, and SEP was observed a weak syneresis in spite of the poor gelation property. The texture analysis indicated OEP gel had a superior firmness and chewiness. These findings demonstrated that CRP may be attractive as a thickener or gelling agent to modulate textures of sugar-free and calcium content food.

Optimization of pectinase-assisted extraction of Annona muricata L. juice and the effect of liquefaction on its pectin structure

BACKGROUND

Soursop (Annona muricata L.) is an underutilized tropical and subtropical fruit with high nutritional and therapeutic benefits. This fruit is faced with enormous post-harvest losses due to its high perishability. This work was aimed to optimize the pectinase-assisted extraction conditions of soursop juice using Doehlert design and to study the effect of pectinase on its pectin structure.

RESULTS

The predicted models were validated for all the responses studied and the regression coefficients ranged from 0.905 to 0.987 (P ≤ 0.05). An incubation time of 172 min, enzyme concentration of 0.04% (w/w) and incubation temperature at 42.9 °C were found to be the optimal conditions for soursop juice extraction, which resulted in 75.20%, 3.74, 7.35 °Brix, 87.06%T, and 0.44% MAE for soursop juice yield (%), pH, total soluble solids (TSS) (°Brix), clarity (%T) and titratable acidity (% malic acid equivalent, MAE), respectively. Morphologically, untreated soursop pulp presented a non-uniform spherical surface; enzyme hydrolyzed soursop exhibited ruptured and wrinkled surface; meanwhile for the different pectin obtained, untreated soursop pectin depicted porous surface and enzyme hydrolyzed soursop pectin showed whirling rough surface. Fourier-transform infrared (FTIR) confirmed the presence of similar chemical group stretching and vibrations in commercial pectin and soursop pectin.

CONCLUSION

Under the optimum conditions, the numerical predictions were similar to the experimental data obtained, thus confirming the validity of the models. Application of enzyme treatment caused the breakdown of pectin structure as illustrated by scanning electron microscopy (SEM) and FTIR analyses.

Structural, physicochemical and emulsifying properties of sweet potato pectin treated by high hydrostatic pressure and/or pectinase: a comparative study

BACKGROUND

Sweet potato (Ipomoea batatas L.) is the sixth most important food crop in the world, and China is the largest producer. Large amounts of sweet potato residues are generated during starch extraction, leading to environmental pollution and resource waste. However, these residues can be used as a viable source for pectin extraction. As a natural biopolymer with high molecular weight and complex structure, the usefulness of pectin has been limited, and it needs to be modified in order to improve its physicochemical properties, thus expanding its applications in the food industry. Therefore, the reported study was conducted to modify sweet potato pectin (SPP) using high hydrostatic pressure (HHP) and/or pectinase treatment, and to determine the effects of such treatment on structural, physicochemical and emulsifying properties.

RESULTS

The results demonstrated that the molecular weight of SPP decreased following HHP and pectinase treatment, which was evidenced using scanning electron microscopy and atomic force microscopy. The degree of esterification was also decreased, confirmed by decreased intensity of the peak at 1739 cm^-1 in the Fourier transform infrared spectrum and decreased peaks at 3.6 and 3.8 ppm in the ¹ H NMR spectrum. Moreover, the content of monosaccharides and uronic acids increased and emulsifying properties improved after HHP and pectinase treatment.

CONCLUSIONS

HHP-assisted pectinase treatment could be used as novel technique for the modification of pectin to give better emulsifying properties with great potential for application in the food industry. © 2020 Society of Chemical Industry.