The influence of hydroxypropyl methylcellulose (HPMC) molecular weight, concentration and effect of food on in vivo erosion behavior of HPMC matrix tablets

Probing the interplay between drug saturation, processing temperature and microstructure of amorphous solid dispersions with synchrotron X-ray phase-contrast tomography

The impact of drug saturation and processing regime on the microstructure of amorphous solid dispersions (ASDs) produced by hot-melt extrusion (HME) has been investigated. By exploring various combinations of drug loadings and processing temperatures, a range of drug saturation points were obtained by HME. The process was monitored with an in-line low-frequency Raman probe to construct the respective solubility phase diagram (i.e., solubility of crystalline drug in molten/soften polymer). The resulting ASDs were analysed with synchrotron X-ray phase-contrast micro computed tomography (Sync-XPC-μCT) in conjunction with a tailored image segmentation strategy to extract quantitative and qualitative descriptors. Despite minimal elemental variability between the drug (paracetamol) and the polymer (HPMC), Sync-XPC-μCT provided sufficient contrast to identify multiple structural domains, including drug-rich crystalline clusters, impurities, polymer-related heterogeneities and voids/pores. Supersaturated ASDs (> 20 wt% drug loading) displayed higher structural complexity and showed a plethora of highly defective API-rich crystalline domains upon ageing, which were absent in the undersaturated ASDs. Beyond its impact on the API physical state, the HME processing regime influenced the degree of homogeneity within the polymer fraction, as well as total porosity, size, shape and pore connectivity. By correlating with fundamental API-polymer solubility data, this study offers additional insight into the dynamics of the drug's solubilisation process during extrusion and the subsequent formation of microstructures within the ASD system, which have potential implications on product performance and stability.

Development of intestinal colonic drug delivery systems for diverticular disease: A QbD approach

This study aimed to advance the development of intestinal colon-coated sustained-release matrix tablets of metronidazole for diverticulitis treatment, employing the Quality by Design (QbD) methodology. Comprehensive Risk analysis and Risk evaluation were conducted to assess the potential risks associated with Critical Material Attributes (CMA) and Critical Process Parameters (CPP). Ishikawa diagram, color-coded risk classification and the Risk Priority Number (RPN) were used as tools for risk evaluation. A Design of Experiments (DoE) was executed using a fractional factorial design, incorporating five key factors derived from the Risk analysis and Risk evaluation. Two levels and a central point were established for each factor, resulting in 28 batches of coated tablets. The manufacturing process involved direct compression, followed by a coating process using pH-dependent or time-dependent polymers. Characterization and dissolution studies were conducted on all batches, and the obtained results underwent analysis of variance (ANOVA). The findings demonstrated the robustness and reproducibility of both the direct compression and coating processes. Statistical analysis identified HPMC/chitosan ratio, blending time, coating polymer, and coating weight gain as factors significantly impacting drug release. A Design Space was established to delineate the interplay of these factors, offering insights into various combinations influencing drug release behavior. Thus, the design space for 10 % weight gain formulations includes a range of HPMC/CH ratios between 2.7-3 and mixing times between 10 and 12 min; for 20 % weight gain formulations it includes a range of HPMC/CH ratios up to 2 and mixing times between 10 and 16 min. Multiple Linear Regression between technological and biopharmaceutical variables were optimized facilitating scale-up operations. Batches with a 10 % weight increase and varied HPMC viscosity grades and coating polymers achieve ∼50 % drug release at 24 h; however, batches with a 20 % weight increase along, with either high proportions of HPMC and short blending times or low proportions of HPMC and longer blending times, achieve slow release of metronidazole. This study contributes to optimizing metronidazole colonic delivery systems, enhancing their potential efficacy in diverticulitis treatment.

Prolongation of the gastric residence time of caffeine after administration in fed state: Comparison of effervescent granules with an extended release tablet

The aim of the present study was to investigate the gastroretentive capacity of different formulation principles. This was indirectly determined by the absorption behavior of caffeine from the dosage forms. A slow and continuous appearance of caffeine in the saliva of healthy volunteers was used as a parameter for a prolonged gastric retention time. For this purpose, a four-way study was conducted with twelve healthy volunteers using the following test procedures: (1) Effervescent granules with 240 mL of still water administered in fed state, (2) effervescent granules with 20 mL of still water in fed state, (3) extended release (ER) tablet with 240 mL of still water in fed state, and (4) effervescent granules with 240 mL of still water in fasted state. The initial rise of the caffeine concentrations was more pronounced after the intake of the effervescent granules in the fed state compared to that of the ER tablets. However, tmax tended to be shorter in the fed study arms following administration of the ER tablet compared to the granules. Overall, the application of active pharmaceutical ingredients formulated as effervescent granules seems to be a promising approach to increase their gastric residence time after intake in fed state.

Fabrication of gastro-floating sustained-release etoricoxib and famotidine tablets: design, optimization, in-vitro, and in-vivo evaluation

In this study, a new gastro-floating sustained-release tablet (GFT) with a combination of Etoricoxib (ET) and Famotidine (FM) was successfully developed. GFTs were prepared by using a combination of hydrophilic swellable natural/semi-synthetic polymers as a controlled-release layer. Through a 24 full factorial statistical experimental design, the effects of formulation factors on the release of GFTs were conducted. The ideal floating tablet (FT) comprised konjac-gum (150 mg), guar-gum (26.57 mg), xanthan-gum (54.17 mg), and HPMC-K15-M (69.25 mg). The ideal FT exhibited a high swelling index (SI) (297.7%) and rapid FLT (around 50 s) in 0.1 N HCl as well as controlled release of ET (22.43% in 1 h and 77.47% in 8 h) and FM (24.89% in 1 h and 93.82% in 8 h) with the absence of any drug-excipient interactions. The AUC0∼72 (ng h/mL) of ET and FM in the GFTs were approximately double-fold of the market, respectively. The relative bioavailability was (207.48 ± 12.02% and 208.51 ± 13.11%) compared with commercial tablets. The X-ray imaging showed a promising buoyancy ability for approximately 8 h. These findings revealed the successful preparation of the sustained-release floating tablet with improved dual drug delivery.

Fingerprinting of hydroxy propyl methyl cellulose by comprehensive two-dimensional liquid chromatography-mass spectrometry of monomers resulting from acid hydrolysis

Hydroxypropyl methyl cellulose (HPMC) is a type of cellulose derivative with properties that render it useful in e.g. food, cosmetics, and pharmaceutical industry. The substitution degree and composition of the β-glucose subunits of HPMC affect its physical and functional properties, but HPMC characterization is challenging due to its high structural heterogeneity, including many isomers. In this study, comprehensive two-dimensional liquid chromatography-mass spectrometry was used to examine substituted glucose monomers originating from complete acid hydrolysis of HPMC. Resolution between the different monomers was achieved using a C18 and cyano column in the first and second LC dimension, respectively. The data analysis process was structured to obtain fingerprints of the monomers of interest. The results revealed that isomers of the respective monomers could be selectively separated based on the position of substituents. The examination of two industrial HPMC products revealed differences in overall monomer composition. While both products contained monomers with a similar degree of substitution, they exhibited distinct regioselectivity.

Polymer Tablet Matrix Systems for the Controlled Release of Dry Betula pendula Leaf Extract

The aim of the study was to develop polymer matrix tablets with modified release of dry Betula pendula leaf extract and to investigate basic parameters influencing the drug release pattern. To fully assess the statistical significance of the influence of the individual factors in the tablet formulation development as well as the combination of them, Tukey's tests and a complete 33 factor analysis of variance (ANOVA) were applied. The following three factors were studied at three levels (low, medium and high): influence of the hydrophobic/hydrophilic polymer ratio Ethylcellulose (EC)/Hydroxypropyl methylcellulose (HPMC) (40/60, 25/75 and 10/90), influence of HPMC molecular weight (500 kDa, 750 kDa and 1150 kDa), and influence of the compression force applied (1 t, 1.5 t and 2 t). The effect of these varied parameters on the drug release parameter t80 was evaluated statistically. Twenty-seven tablet models were formulated, including all possible combinations of the variables. The obtained drug release profiles demonstrated that a 25/75 (EC/HPMC) ratio was the most suitable for prolonging the release process. Increasing the molecular weight of HMPC from 500 kDa to 750-1150 kDa and applying higher compression force significantly influenced the studied t80 values and caused sustained drug release (t80 up to 7.97 h). The combination of the hydrophilic HPMC polymer with the hydrophobic EC can result in the formation of a promising drug-carrying matrix, offering effective control of the drug release process.

Rheological and mechanical properties of hydroxypropyl methylcellulose-based hydrogels and cryogels controlled by AOT and SDS micelles

HYPOTHESIS

The type and concentration of surfactants affect the rheological behavior of hydroxypropyl methylcellulose (HPMC) chains in hydrogels, influencing the microstructure and mechanical properties of HPMC cryogels.

EXPERIMENTS

Hydrogels and cryogels containing HPMC, AOT (bis (2-ethylhexyl) sodium sulfosuccinate or dioctyl sulfosuccinate salt sodium, two C8 chains and sulfosuccinate head group), SDS (sodium dodecyl sulfate, one C12 chain and sulfate head group), and sodium sulfate (salt, no hydrophobic chain) at different concentrations were investigated using small-angle X-ray scattering (SAXS), scanning electron microscopy (SEM), rheological measurements, and compressive tests.

FINDINGS

SDS micelles bound to the HPMC chains building "bead necklaces", increasing considerably the storage modulus G' values of the hydrogels and the compressive modulus E values of the corresponding cryogels. The dangling SDS micelles promoted multiple junction points among the HPMC chains. AOT micelles and HPMC chains did not form "bead necklaces". Although AOT increased the G' values of the hydrogels, the resulting cryogels were softer than pure HPMC cryogels. The AOT micelles are probably embedded between HPMC chains. The AOT short double chains rendered softness and low friction to the cryogel cell walls. Therefore, this work demonstrated that the structure of the surfactant tail can tune the rheological behavior of HPMC hydrogels and hence the microstructure of the resulting cryogels.

Surface Modifiers on Composite Particles for Direct Compaction

Direct compaction (DC) is considered to be the most effective method of tablet production. However, only a small number of the active pharmaceutical ingredients (APIs) can be successfully manufactured into tablets using DC since most APIs lack adequate functional properties to meet DC requirements. The use of suitable modifiers and appropriate co-processing technologies can provide a promising approach for the preparation of composite particles with high functional properties. The purpose of this review is to provide an overview and classification of different modifiers and their multiple combinations that may improve API tableting properties or prepare composite excipients with appropriate co-processed technology, as well as discuss the corresponding modification mechanism. Moreover, it provides solutions for selecting appropriate modifiers and co-processing technologies to prepare composite particles with improved properties.

Mini-tablets as technological strategy for modified release of morphine sulfate

The aim of this study was to use intelligent formulation design for development of mini-tablets for modified release of morphine sulfate. A formulation (F1) was proposed using the Hiperstart® software. Based on the suggested formulation, two other formulations (F2 and F3) were prepared: one for modified and another for immediate drug release. The powders were characterized as bulk and tapped density, Hausner's factor and compressibility index analyzes. Mini-tablets were directly compressed and characterized as hardness, friability, size, and weight variation. The in vitro drug release profile was carried out according to the apparatus 1 of USP. Formulations showed good flow properties, and the mini-tablets displayed characteristics according to the specified. In comparison to F3 (immediate release), F1 and F2 displayed slower drug release time, showing the efficiency of the matrix formed. F3 displayed 90% of drug released up to 10 min, while F1 and F2 required 240 min. The results highlight the importance to use intelligent formulation design for the development of improved mini-tablet matrices. Formulation F1 was found to be suitable for modified morphine sulfate release. Further studies with more formulations are necessary for production of optimized mini-tablets with suitable prolonged morphine sulfate release.

Development of a long-acting tablet with ticagrelor high-loaded nanostructured lipid carriers

Ticagrelor (TCG), an antiplatelet agent, has low solubility and permeability; thus, there are many trials to apply the pharmaceutical technology for the enhancement of TCG solubility and permeability. Herein, we have developed the TCG high-loaded nanostructured lipid carrier (HL-NLC) and solidified the HL-NLC to develop the oral tablet. The HL-NLC was successfully fabricated and optimized with a particle size of 164.5 nm, a PDI of 0.199, an encapsulation efficiency of 98.5%, and a drug loading of 16.4%. For the solidification of HL-NLC (S-HL-NLC), the adsorbent was determined based on the physical properties of the S-HL-NLC, such as bulk density, tap density, angle of repose, Hausner ratio, Carr's index, and drug content. Florite R was chosen because of its excellent adsorption capacity, excellent physical properties, and solubility of the powder after manufacturing. Using an S-HL-NLC, the S-HL-NLC tablet with HPMC 4 K was prepared, which is showed a released extent of more than 90% at 24 h. Thus, we have developed the sustained release tablet containing the TCG-loaded HL-NLC. Moreover, the formulations have exhibited no cytotoxicity against Caco-2 cells and improved the cellular uptake of TCG. In pharmacokinetic study, compared with raw TCG, the bioavailability of HL-NLC and S-HL-NLC was increased by 293% and 323%, respectively. In conclusion, we successfully developed the TCG high-loaded NLC tablet, that exhibited a sustained release profile and enhanced oral bioavailability.

Simultaneous Determination of Active Pharmaceutical Ingredients and Water-Soluble Polymers: Analysis of Dissolution Profiles from Sustained-Release Formulations and Mechanisms Involved

The dissolution behaviors of base excipients from sustained-release formulations have been investigated using various methodologies. However, the dissolution of polymers has not been fully evaluated because differences between formulations are still verified only by the release of active pharmaceutical ingredients (APIs). In our previous study, we proposed a quick and simultaneous analysis of dissolved APIs and water-soluble polymers by ultra HPLC using charged aerosol and photodiode array detectors. The purpose of this study was to verify whether the analysis system could be adapted to other water-soluble polymers. Dissolution tests were conducted using matrix model tablets prepared from three polymers and three APIs (propranolol, ranitidine, and cilostazol) with different solubilities. The dissolution profiles of the polymers and APIs were determined using the proposed analysis system and compared. The results clarified differences in the dissolution behaviors of the APIs and polymers. The polymers, especially hydroxypropyl cellulose, exhibited the dissolution properties characteristic of each model formulation. Propranolol and ranitidine showed the diffusion type, while cilostazol showed the erosion type release mechanism due to their different solubilities. The release of cilostazol was delayed in all models compared to the polymer, which may be due to the aggregation of cilostazol in the gel layer. This analytical method can be used to study the dissolution behavior (diffusion or erosion) of APIs from matrix tablets containing various polymers. This method will provide useful information on release control, which will make it easier and more efficient to design appropriate formulations and analyze the release mechanisms.

Budding Multi-matrix Technology-a Retrospective Approach, Deep Insights, and Future Perspectives

The human race is consistently striving for achieving good health and eliminate disease-causing factors. For the last few decades, scientists have been endeavoring to invent and innovate technologies that can substitute the conventional dosage forms and enable targeted and prolonged drug release at a particular site. The novel multi-matrix technology is a type of matrix formulation where the formulation is embraced to have a matrix system with multiple number of matrices. The MMX technology embraces with a combination of outer hydrophilic layer and amphiphilic/lipophilic core layer, within which drug is encapsulated followed by enteric coating for extended/targeted release at the required site. In comparison to conventional oral drug delivery systems and other drug delivery systems, multi-matrix (MMX) technology formulations afford many advantages. Additionally, it attributes for targeting strategy aimed at the colon and offers modified prolonged drug release. Thus, it has emerged rapidly as a potential alternative option in targeted oral drug delivery. However, the development of this MMX technology formulations is a exigent task and also has its own set of limitations. Due to its promising advantages and colon targeting strategy over the other colon targeted drug delivery systems, premier global companies are exploiting its potential. This article review deep insights into the formulation procedures, drug delivery mechanism, advantages, limitations, safety and efficacy studies of various marketed drug formulations of MMX technology including regulatory perspectives and future perspectives.

Quick and Simultaneous Analysis of Dissolved Active Pharmaceutical Ingredients and Formulation Excipients from the Dissolution Test Utilizing UHPLC and Charged Aerosol Detector

The objective of the study is to develop a quick and simultaneous analysis system for the dissolution of the active pharmaceutical ingredient (API) and the formulation excipient in samples from the dissolution test by UHPLC using the charged aerosol and PDA detectors. The combination of two columns for size-exclusion chromatography (SEC) and the equipment of the charged aerosol detector allowed the quick determination of various water-soluble polymers. Three model sustained-release tablets, each containing a different API of different water solubility (propranolol (soluble), ranitidine (very soluble), and cilostazol (practically insoluble)), were prepared from polyethylene oxide (PEO) matrix to verify the applicability and utility of the analysis system. The dissolution of propranolol was the same as that of PEO, indicating that the diffusion rate of propranolol was consistent with the erosion rate of the PEO and that the dissolution of PRO was based on diffusion. Ranitidine was released faster than PEO, suggesting that ranitidine was diffused through the gel layer of PEO early upon contact with the dissolution medium and before PEO gel erosion. Cilostazol was released slower as compared to PEO, indicating that cilostazol dissolution was based on the polymer's erosion. These results suggested that the analysis system developed in this study is a precise and valid tool to study the dissolution behavior of both APIs and excipients. Optimization of the SEC column for the appropriate separation of APIs and excipients makes the analysis system more efficient and convenient to study the drug release mechanisms and to design formulations.

Development of a furosemide-containing expandable system for gastric retention

More than 50 years ago, the first gastroretentive dosage forms came up. Since then, no practical and at the same time reliable gastroretentive system is available on market. A major obstacle in the development of novel gastroretentive systems is the lack of proper predictive test methods. In the present work, we aimed at developing and fully characterizing an expandable gastroretentive system containing furosemide as model drug. On the one hand, we used well-established in vitro tests for drug dissolution and gastroretentive properties (paddle apparatus, swelling characteristics). On the other hand, we used two novel models (dissolution stress test device, mechanical antrum model) to assess these properties under biorelevant conditions. Moreover, we performed an in vivo study under fed and fasted conditions that combined blood sampling and a high-resolution imaging technique (magnetic marker monitoring) to determine gastrointestinal location with the assessment of a pharmacodynamic endpoint (urinary sodium excretion). In vitro dissolution tests confirmed prolonged drug release over more than 8 h independent from pH and with slight pressure sensitivity. Swelling studies indicated good swelling behavior within 4 h along with medium gastroretentive properties as determined with the mechanical antrum model. In vivo imaging showed prolonged gastric residence time after fed compared to fasted administration (481 min vs 38 min). Comparison of geometric means of AUC_o-tlast of the model drug confirmed this observation with 10 times higher value after fed administration. Urinary excretion of sodium well reflected the increased sodium-reuptake inhibition due to higher furosemide exposure under fed conditions. However, the poor performance after fasted intake of the system is in line with data from several other gastroretentive formulations. The present study highlighted the value of novel test methods during the development of gastroretentive formulations. Yet, a system with reproducible gastroretentive properties especially under fasted conditions has to be designed.

Release kinetics of hydroxypropyl methylcellulose governing drug release and hydrodynamic changes of matrix tablet

BACKGROUND

Hydrophilic hydroxypropyl methylcellulose (HPMC) matrix tablets are the standard role model of the oral controlled-release formulation. Nevertheless, the HPMC kinetics for the mechanistic understanding of drug release and hydrodynamic behaviors are rarely investigated. This study aims to investigate the release behaviors of both HPMC and paracetamol (model drug) from the hydrophilic matrix tablet.

METHODS

Two different viscosity grades of HPMC were used (Low viscosity: 6 cps, High viscosity: 4,000 cps). Three different ratios of drug/HPMC (H:38.08%, M:22.85%, and L:15.23% (w/w) of HPMC amounts in total weight) matrix tablets were prepared by wet granulation technique. The release profiles of the drug and HPMC in a matrix tablet were quantitatively analyzed by HPLC and 1H-nuclear magnetic resonance (NMR) spectroscopy. The hydrodynamic changes of HPMC were determined by the gravimetric behaviors such as swelling and erosion rates, gel layer thickness, front movement data,and distributive near-infrared (NIR) chemical imaging of HPMC in a matrix tablet during the dissolution process.

RESULTS

High viscosity HPMC tablets showed slower release of HPMC than the release rate of drug, suggesting that drug release preceded polymer release.Different hydration phenomenon was qualitatively identified and corresponded to the release profiles. The release behaviors of HPMC and drug in the tablet could be distinguished with the significant difference with fitted dissolution kinetics model (Low viscosity HPMC 6cps; Korsmeyer-Peppas model, High viscosity HPMC 4000cps; Hopfenberg model, Paracetamol; Weibull model) according to the weight of ingredients and types of HPMC.

CONCLUSION

The determination of HPMC polymer release correlating with drug release, hydrodynamic behavior, and NIR chemical imaging of HPMC can provide new insights into the drug release-modulating mechanism in the hydrophilic matrix system.

Ophthalmic In Situ Gels with Balsam Poplar Buds Extract: Formulation, Rheological Characterization, and Quality Evaluation

Balsam poplar buds are a raw material with a high content of polyphenols. Various polyphenols are known for their anti-inflammatory and antioxidant properties. In this study, an aqueous extract of balsam poplar buds was prepared in order to use environmentally friendly and non-aggressive solvents. The aqueous extract was lyophilized, and a 1% aqueous solution of lyophilized balsam poplar buds extract (L1) was prepared. L1 solution was used as a source of polyphenols for the production of ophthalmic in situ gels, so as to develop a product featuring antioxidant properties. Poloxamer 407 (P407) and hydroxypropyl methylcellulose (HPMC) were selected as gelling agents for the in situ gels. In order to select the formulations with the best conditions of use, formulations of different polymer concentrations (P407—10%, 12%, 15%; HPMC—0.5%, 0.75%) were prepared, choosing the same amount of the active polyphenol source L1. The physicochemical properties, rheological parameters, stability, and irritant effect on the rabbit corneal cell line (SIRC) were evaluated. Formulations in which P407 and HMPC concentrations were 10/0.75% and 12%/0.75% reached a gelation point close to the ocular surface temperature; the gels remained stable for 30 days and did not cause an irritant effect on the SIRC cell line.

Gel Strength of Hydrophilic Matrix Tablets in Terms of In Vitro Robustness

PURPOSE

The purpose of this study was to correlate the gel strength of swollen matrix tablets with their in vitro robustness against agitation intensity and applied mechanical forces. Five commercial products, i.e. Glucophage®, Alfuzosin®, Tromphyllin®, Preductal® MR and Quetiapin® formulated as water-soluble/erodible matrix tablets were investigated.

METHODS

Effect of agitation speed (50-150 rpm) on drug release, hydration/erosion and gel strength was investigated using USP paddle apparatus II. The gel strength of matrix tablets during dissolution at different conditions was characterized by a texture analyzer.

RESULTS

Commercial tablets formulated with HPMC of higher viscosity, such as K15M or K100M, demonstrated the gel strength in swollen state >0.02 MPa. In this case, the release mechanism was predominantly diffusional and, therefore, not affected by stirring speed and mechanical stress. In contrast, the Quetiapin® matrix tablet, formulated with HPMC K 4 M in amount of approx. 25%, demonstrated the gel strength dropped below 0.02 MPa after 6 h of release. In this case, the drug was predominantly released via erosional mechanism and very susceptible to stirring speed.

CONCLUSION

Sufficient gel strength of swollen tablets is an important prerequisite for unchanged in vitro performance in consideration of mechanical stress.

Probing the Release of Bupropion and Naltrexone Hydrochloride Salts from Biopolymeric Matrices of Diverse Chemical Structures

In the last decades, the notion of including excipients in the formulations, as inert substances aiding production processes, has changed and they are recently viewed as multifunctional discrete entities. It is now well documented that excipients serve several roles, spreading from the stabilization and modified release, to providing biocompatible properties and targeting moieties. The aim of this study was to develop matrix-based oral drug delivery systems of bupropion hydrochloride (BUP·HCl) and naltrexone hydrochloride (NTX·HCl), suitable for releasing these active substances in a modified manner, providing a stable level of drug release, which is simultaneously therapeutically effective and non-toxic, thus reducing side effects, after a single dose administration, throughout the gastrointestinal tract. The new formulations, employing hydroxypropylmethycellulose (HPMC K15M) (a cellulosic polymer, which, generally hydrates to form a gelatinous layer that is critical to prevent wetting and rapid drug release from the matrices), poly(methacylic acid-co-ethyl acrylate) 1:1 (Eudragit^® L100-55: effective for site specific drug delivery in intestine), poly(ethylene oxide) (PEO) (7 × 10⁶: a high molecular weight polymer, water-soluble, in micro-granular powder form), as the rate controlling polymers, were chosen to lead to a "soothing out" release pattern of these drugs, at 0 ≤ t ≤ 120 min. Moreover, the release of the two drugs from the ulvan-based tablets, was found to follow the desired profile, throughout the entire course of the dissolution experiments.

Hydroxypropyl methylcellulose: Physicochemical properties and ocular drug delivery formulations

Hydroxypropyl methylcellulose (HPMC) is a cellulose ether widely used in drug formulations due to its biocompatibility, uncharged nature, solubility in water and thermoplastic behavior. Particularly for ocular and ophthalmic formulations, HPMC is applied as viscosity enhancer agent in eye drops, gelling agent in injections, and polymeric matrix in films, filaments and inserts. The different therapeutic approaches are necessary due to the complex anatomic structure of the eye. The natural ocular barriers and the low drug permeation into the circulatory system make the drug administration challenging. This review presents the eye anatomy and the usual local routes of drugs administration, which are facilitated by the physicochemical properties of HPMC. The relationship between chemical structure and physicochemical properties of HPMC is displayed. The different types of formulations (local application) including HPMC for ocular drug delivery are discussed with basis on recent literature reports and patents.

Manipulation of the Glass Transition Properties of a High-Solid System Made of Acrylic Acid-N,N'-Methylenebisacrylamide Copolymer Grafted on Hydroxypropyl Methyl Cellulose

Crosslinking of hydroxypropyl methyl cellulose (HPMC) and acrylic acid (AAc) was carried out at various compositions to develop a high-solid matrix with variable glass transition properties. The matrix was synthesized by the copolymerisation of two monomers, AAc and N,N′-methylenebisacrylamide (MBA) and their grafting onto HMPC. Potassium persulfate (K₂S₂O₈) was used to initiate the free radical polymerization reaction and tetramethylethylenediamine (TEMED) to accelerate radical polymerisation. Structural properties of the network were investigated with Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), modulated differential scanning calorimetry (MDSC), small-deformation dynamic oscillation in-shear, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The results show the formation of a cohesive macromolecular entity that is highly amorphous. There is a considerable manipulation of the rheological and calorimetric glass transition temperatures as a function of the amount of added acrylic acid, which is followed upon heating by an extensive rubbery plateau. Complementary TGA work demonstrates that the initial composition of all the HPMC-AAc networks is maintained up to 200 °C, an outcome that bodes well for applications of targeted bioactive compound delivery.

Promising Swellable Floating Bupropion Tablets: Formulation, in vitro/in vivo Evaluation and Comparative Pharmacokinetic Study in Human Volunteers

Purpose

Bupropion is an antidepressant drug that facilitates weight loss. It is a highly water-soluble drug that needs multiple dosing, so it is considered a potential candidate for oral controlled-release dosage form. The aim of this research was to formulate and evaluate satiety-inducing swellable floating bupropion tablets by direct compression targeting depression associated with eating disorders. Various combinations of natural and semi-synthetic hydrogels were selected to achieve maximum swelling and remaining buoyant in the stomach. This synergistically enhances weight loss by increasing satiety.

Methods

An I-optimal mixture design was conducted to establish the optimal quantitative composition of tablets. Friability, floating lag time, swelling index after 4 and 8 hours, along with the percent of bupropion released at 1 and 8 hours were selected as dependent variables. The optimized formulation was characterized by physicochemical properties, thermal stability, and chemical interaction. In vivo radiographic evaluation of gastric residence besides, the oral bioavailability relative to marketed Wellbutrin^® sustained-release tablets were investigated using human volunteers.

Results

The optimized formulation (73.3 mg xanthan, 120 mg glucomannan, 8.4 mg tamarind kernel powder, 78.3 mg HPMC K15M) was achieved with the overall desirability equals 0.782. In vivo radiographic study showed that formulation was retained for >8 hours in the stomach. Compared with the marketed BUP tablets, the C_max was almost the same with a significant increase (p =0.004) for T_max.

Conclusion

Using combinations of these hydrogels would be promising gastroretentive delivery systems in the control of bupropion rate release with enhanced floating and swelling features.

Scintigraphic evaluation of the in vivo performance of dry-coated delayed-release tablets in humans

We characterized the gastrointestinal (GI) transit and drug release characteristics of dry-coated delayed-release tablets under both prandial states in humans using a gamma scintigraphy approach. We also estimated the onset time of drug release from the dry-coated tablets after dissolution of the outer layer in a clinical study, and compared findings with those of in vitro release testing. The dry-coated tablets used in this study were composed of a core containing radiolabeled resin (111-Indium) and a gel forming outer layer made of polyethylene oxide and polyethylene glycol. The dry-coated tablets were administered to human subjects in the fasted and fed state (30 min after ingestion of a standard breakfast radiolabeled with 99m-Technetium). Gastric emptying time, small intestinal transit time, and onset of radioactivity release in the GI tract were estimated from scintigraphic imaging. Release characteristics of the radiolabel from the dry-coated tablets were also assessed in in vitro dissolution testing using a USP apparatus 2 (paddle). Ingestion of food affected the gastric emptying time of the dry-coated tablets but not small intestinal transit. Onset timing of the release of radioactivity from the core of two different formulas of dry-coated tablets was characterized. The onset timing of drug release in the fasted subjects was markedly similar to that in the in vitro dissolution testing at a paddle rate of 200 rpm.

Biopharmaceutical Understanding of Excipient Variability on Drug Apparent Solubility Based on Drug Physicochemical Properties: Case Study-Hypromellose (HPMC)

Identification of the biopharmaceutical risks of excipients and excipient variability on oral drug performance can be beneficial for the development of robust oral drug formulations. The current study investigated the impact of Hypromellose (HPMC) presence and varying viscosity type, when used as a binder in immediate release formulations, on the apparent solubility of drugs with wide range of physicochemical properties (drug ionization, drug lipophilicity, drug aqueous solubility). The role of physiological conditions on the impact of excipients on drug apparent solubility was assessed with the use of pharmacopoeia (compendial) and biorelevant media. Presence of HPMC affected drug solubility according to the physicochemical properties of studied compounds. The possible combined effects of polymer adsorption (drug shielding effect) or the formation of a polymeric viscous layer around drug particles may have retarded drug dissolution leading to reduced apparent solubility of highly soluble and/or highly ionized compounds and were pronounced mainly at early time points. Increase in the apparent solubility of poorly soluble low ionized drugs containing a neutral amine group was observed which may relate to enhanced drug solubilization or reduced drug precipitation. The use of multivariate data analysis confirmed the importance of drug physicochemical properties on the impact of excipients on drug apparent solubility and revealed that changes in HPMC material properties or amount may not be critical for oral drug performance when HPMC is used as a binder. The construction of a roadmap combining drug, excipient, and medium characteristics allowed the identification of the cases where HPMC presence may present risks in oral drug performance and bioavailability.

Assessment of the effect of polymers combination and effervescent component on the drug release of swellable gastro-floating tablet formulation through compartmental modeling-based approach

The aim of this research was to assess the effect of polymer blend and effervescent components on the floating and swelling behaviors of swellable gastro-floating formulation as well as the drug release through a compartmental modeling analysis. Swellable gastro-floating formulation of freely water-soluble drug, metformin HCl as a drug model, was formulated and developed using D-optimal design. Polymer combination between interpolymer complex (IPC) (poly-vinyl acetate-copolymer methacrylate) and hydroxy propyl methyl cellulose (HPMC), and effervescent components were studied and optimized in this work. Several factors affecting the drug release behavior were determined e.g. swelling behavior, erosion behavior, and floating behavior were studied as well as the drug release through compartmental modeling analysis. The results revealed that the hydrophilic polymer was responsible for gas entrapment formed from effervescent reaction, meanwhile IPC contributed on maintaining the swollen matrix integrity through intermolecular polymer interaction. In addition, effervescent components played fundamental role in the formation of porous system as well as inducing burst release effect. Compartmental modeling provided different outlook about the drug release. Presence of IPC at a high proportion (10-15%) of the polymer blend modulated the changes of pattern of the drug release kinetics and mechanism. Finally, compartmental modeling-based approach was more adequate to describe the drug release kinetics and mechanism compared to the monophasic equation model correlating with process understanding of the drug release from swellable gastro-floating formulation.

Spray-Dried Amorphous Solid Dispersions of Atorvastatin Calcium for Improved Supersaturation and Oral Bioavailability

Over the past few decades, the amorphous solid dispersions (ASDs) technique has emerged as a promising strategy to enhance the in vitro/in vivo characteristic of hydrophobic drugs. The low aqueous solubility and poor bioavailability of atorvastatin calcium (ATO), a lipid-lowering drug, present challenges for effective drug delivery. The objective of this work was to improve the aqueous solubility, in vitro dissolution, and oral absorption of ATO with amorphous solid dispersion technique prepared by spray-drying method. The optimized ternary formulation comprising of ATO; hydroxypropyl methylcellulose (HPMC), as a hydrophilic polymer; and sodium lauryl sulfate (SLS), as a surfactant, at a weight ratio of 1/1/0.1, showed significant improvement in aqueous solubility by ~18-fold compared to that of the free drug, and a cumulative release of 94.09% compared to a release of 59.32% of the free drug. Further, physicochemical studies via scanning electron microscopy, differential scanning calorimetry, and powder X-ray diffraction revealed a change from the crystalline state of the free drug to its amorphous state in the ASD. Pharmacokinetic analysis in rats demonstrated 1.68- and 2.39-fold increments in AUC and Cmax, respectively, in the ASD over the free drug. Altogether, hydrophilic carrier-based ASDs prepared by the spray-drying technique represent a promising strategy to improve the biopharmaceutical performance of poorly soluble drugs.

In Vitro and In Vivo Test Methods for the Evaluation of Gastroretentive Dosage Forms

More than 50 years ago, the first concepts for gastroretentive drug delivery systems were developed. Despite extensive research in this field, there is no single formulation concept for which reliable gastroretention has been demonstrated under different prandial conditions. Thus, gastroretention remains the holy grail of oral drug delivery. One of the major reasons for the various setbacks in this field is the lack of predictive in vitro and in vivo test methods used during preclinical development. In most cases, human gastrointestinal physiology is not properly considered, which leads to the application of inappropriate in vitro and animal models. Moreover, conditions in the stomach are often not fully understood. Important aspects such as the kinetics of fluid volumes, gastric pH or mechanical stresses have to be considered in a realistic manner, otherwise, the gastroretentive potential as well as drug release of novel formulations cannot be assessed correctly in preclinical studies. This review, therefore, highlights the most important aspects of human gastrointestinal physiology and discusses their potential implications for the evaluation of gastroretentive drug delivery systems.

Sources, Extraction and Biomedical Properties of Polysaccharides

In the recent era, bioactive compounds from plants have received great attention because of their vital health-related activities, such as antimicrobial activity, antioxidant activity, anticoagulant activity, anti-diabetic activity, UV protection, antiviral activity, hypoglycemia, etc. Previous studies have already shown that polysaccharides found in plants are not likely to be toxic. Based on these inspirational comments, most research focused on the isolation, identification, and bioactivities of polysaccharides. A large number of biologically active polysaccharides have been isolated with varying structural and biological activities. In this review, a comprehensive summary is provided of the recent developments in the physical and chemical properties as well as biological activities of polysaccharides from a number of important natural sources, such as wheat bran, orange peel, barely, fungi, algae, lichen, etc. This review also focused on biomedical applications of polysaccharides. The contents presented in this review will be useful as a reference for future research as well as for the extraction and application of these bioactive polysaccharides as a therapeutic agent.

Novel Hot Melt Extruded Matrices of Hydroxypropyl Cellulose and Amorphous Felodipine-Plasticized Hydroxypropyl Methylcellulose as Controlled Release Systems

Hydroxypropyl methylcellulose (HPMC) is a hydrophilic retarding-release polymer with the limited application in hot melt extrusion (HME) due to its high glass transition temperature (T_g 181-191°C) and melt viscosity. The aim of this study is to develop hot melt extruded matrices using hydroxypropyl cellulose (HPC) and felodipine (FLDP) with HPMC for controlled release and explore the relations of their specialty, processability, and structure with the product properties. Results showed that FLDP/HPC_EF/HPMC can be extruded at 160°C with torques not more than 0.5 N·m. The extruded matrices of FLDP/HPC_EF/HPMC_K15M (10:45:45 and 30:35:35) achieved the controlled release for 24 h. Rheological behaviors demonstrated that HPC_EF and FLDP were miscible with HPMC_K15M, attaining maximum 30% FLDP soluble in the molten mixtures. HPC_EF and FLDP decreased the complex viscosity and plasticized HPMC_K15M to improve the extrusion processing. DSC and FT-IR indicated that the molten soluble FLDP was amorphous in the extruded matrices by hydrogen bonding with HPC_EF/HPMC_K15M. SEM/energy-dispersive X-ray microanalysis illustrated that the microstructure of extrudates was surface dense and interior loose, and FLDP was homogenously dispersed. Three-point bending test revealed that the plasticizers of HPC_EF and FLDP contributed differently to the mechanical properties. HPC_EF decreased the flexural modulus of HPMC_K15M while that of HPC_EF/HPMC_K15M was increased by FLDP. Besides controlled release, low moisture absorption and enhanced stability were also the correlated achievements. Therefore, HPC_EF-combined poorly water-soluble drugs to plasticize HPMC_K15M provide an alternative novel potential approach to realize the controlled-release delivery via HME.

Reducing Burst Release Effect of Freely Water-Soluble Drug Incorporated into Gastro-Floating Formulation Below HPMC Threshold Concentration Through Interpolymer Complex

Undesired-burst release effect is observed in a freely water-soluble drug formulated into a gastro-floating formulation with effervescent (GFFE) delivery system. In order to address this limitation, interpolymer complex (IPC) of two swellable and non-soluble polymers, poly-ammonium methacrylate and poly-vinyl acetate, was incorporated into hydroxypropyl methyl cellulose (HPMC)-based matrix GFFE. This research studied the effect and interaction of the IPC-HPMC blending on the drug release of GFFE using a freely water-soluble drug, metformin HCl, under different threshold concentration levels and curing effect. The interaction between the IPC and HPMC was characterized using vibrational spectroscopy and thermal analyses under curing and swelling conditions. Anti-solvent followed by lyophilization had better physicochemical and physicomechanic properties than spray dying technique. The interaction was observed by a specific shifting of the vibrational peaks and alteration of the thermal behavior pattern. These effects altered the drug release behavior. Thereafter, the IPC reduced burst release effects in the initial time and during testing, and the IPC improved the HPMC matrix robustness under mechanical stress testing below threshold concentration of HPMC matrix formulated in the GFFE.

The mechanisms of pharmacokinetic food-drug interactions - A perspective from the UNGAP group

The simultaneous intake of food and drugs can have a strong impact on drug release, absorption, distribution, metabolism and/or elimination and consequently, on the efficacy and safety of pharmacotherapy. As such, food-drug interactions are one of the main challenges in oral drug administration. Whereas pharmacokinetic (PK) food-drug interactions can have a variety of causes, pharmacodynamic (PD) food-drug interactions occur due to specific pharmacological interactions between a drug and particular drinks or food. In recent years, extensive efforts were made to elucidate the mechanisms that drive pharmacokinetic food-drug interactions. Their occurrence depends mainly on the properties of the drug substance, the formulation and a multitude of physiological factors. Every intake of food or drink changes the physiological conditions in the human gastrointestinal tract. Therefore, a precise understanding of how different foods and drinks affect the processes of drug absorption, distribution, metabolism and/or elimination as well as formulation performance is important in order to be able to predict and avoid such interactions. Furthermore, it must be considered that beverages such as milk, grapefruit juice and alcohol can also lead to specific food-drug interactions. In this regard, the growing use of food supplements and functional food requires urgent attention in oral pharmacotherapy. Recently, a new consortium in Understanding Gastrointestinal Absorption-related Processes (UNGAP) was established through COST, a funding organisation of the European Union supporting translational research across Europe. In this review of the UNGAP Working group "Food-Drug Interface", the different mechanisms that can lead to pharmacokinetic food-drug interactions are discussed and summarised from different expert perspectives.

Optimal Selection of Incoming Materials from the Inventory for Achieving the Target Drug Release Profile of High Drug Load Sustained-Release Matrix Tablet

In the pharmaceutical process, raw material (including APIs and excipients) variability can be delivered to the final product, and lead to batch-to-batch and lot-to-lot variances in its quality, finally impacting the efficacy of the drug. In this paper, the Panax notoginseng saponins (PNS) sustained-release matrix tablet was taken as the model formulation. Hydroxypropyl methylcellulose with the viscosity of 4000 mPa·s (HPMCK4M) from different vendors and batches were collected and their physical properties were characterized by the SeDeM methodology. The in-vitro dissolution profiles of active pharmaceutical ingredients (APIs) from matrix tablets made up of different batches HPMC K4M displayed significant variations. Multi-block partial least squares (MB-PLS) modeling results further demonstrated that physical properties of excipients played dominant roles in the drug release. In order to achieve the target drug release profile with respect to those far from the criteria, the optimal selection method of incoming materials from the available was established and validated. This study provided novel insights into the control of the input variability of the process and amplified the application of the SeDeM expert system, emphasizing the importance of the physical information of the raw materials in the drug manufacturing process.

Physiological Considerations and In Vitro Strategies for Evaluating the Influence of Food on Drug Release from Extended-Release Formulations

Food effects on oral drug bioavailability are a consequence of the complex interplay between drug, formulation and human gastrointestinal (GI) physiology. Accordingly, the prediction of the direction and the extent of food effects is often difficult. With respect to novel formulations, biorelevant in vitro methods can be extremely powerful tools to simulate the effect of food-induced changes on the physiological GI conditions on drug release and absorption. However, the selection of suitable in vitro methods should be based on a thorough understanding not only of human GI physiology but also of the drug and formulation properties. This review focuses on in vitro methods that can be applied to evaluate the effect of food intake on drug release from extended release (ER) products during preclinical formulation development. With the aid of different examples, it will be demonstrated that the combined and targeted use of various biorelevant in vitro methods can be extremely useful for understanding drug release from ER products in the fed state and to be able to forecast formulation-associated risks such as dose dumping in early stages of formulation development.

The impact of food intake on the luminal environment and performance of oral drug products with a view to in vitro and in silico simulations: a PEARRL review

Objectives

Using the type of meal and dosing conditions suggested by regulatory agencies as a basis, this review has two specific objectives: first, to summarize our understanding on the impact of food intake on luminal environment and drug product performance and second, to summarize the usefulness and limitations of available in vitro and in silico methodologies for the evaluation of drug product performance after food intake.

Key findings

Characterization of the luminal environment and studies evaluating product performance in the lumen, under conditions suggested by regulatory agencies for simulating the fed state, are limited. Various in vitro methodologies have been proposed for evaluating drug product performance in the fed state, but systematic validation is lacking. Physiologically based pharmacokinetic (PBPK) modelling approaches require the use of in vitro biorelevant data and, to date, have been used primarily for investigating the mechanisms via which an already observed food effect is mediated.

Summary

Better understanding of the impact of changes induced by the meal administration conditions suggested by regulatory agencies on the luminal fate of the drug product is needed. Relevant information will be useful for optimizing the in vitro test methods and increasing the usefulness of PBPK modelling methodologies.

Setting up multivariate specifications on critical raw material attributes to ensure consistent drug dissolution from high drug-load sustained-release matrix tablet

The purpose of this study was to describe the raw material variability that influenced the in-vitro dissolution behavior of high drug-load sustained-release matrix tablet and to ensure the consistent quality of the final product. The Panax notoginseng saponins (PNS) - hydroxypropyl methylcellulose - anhydrous lactose - magnesium stearate (57:20:23:0.5%, w/w) was used as the model formulation. PNS extract powders with lot-to-lot and source-to-source differences were collected to cover the common cause variations and their physicochemical properties were characterized by the chromatographic fingerprints and the SeDeM expert system. It was found that the release behavior of active pharmaceutical ingredients (APIs) in PNS from different batches exhibited considerable variations. Latent variable modeling results demonstrated that the physical properties of raw materials played major roles in predicting the drug dissolution. PNS extracts with high specific surface area, the width of particle size distribution and hygroscopicity or low moisture content led to an increase in drug release. In order to perform efficient pass/fail judgments for incoming new materials, multivariate specifications of critical material attributes (CMAs) were established and the multivariate design space in line with the quality by design (QbD) principles was explored to achieve the release target.

Facile development, characterization, and optimization of new metformin-loaded nanocarrier system for efficient colon cancer adjunct therapy

PURPOSE

Metformin hydrochloride (MF) repurposing as adjuvant anticancer therapy for colorectal cancer (CRC) proved effective. Several studies attempted to develop MF-loaded nanoparticles (NPs), however the entrapment efficiency (EE%) was poor. Thus, the present study aimed at the facile development of a new series of chitosan (CS)-based semi-interpenetrating network (semi-IPN) NPs incorporating Pluronic^® nanomicelles as nanocarriers for enhanced entrapment and sustained release of MF for efficient treatment of CRC.

METHODS

The NPs were prepared by ionic gelation and subsequently characterized using FTIR, DSC, TEM, and DLS. A full factorial design was also adopted to study the effect of various formulation variables on EE%, particle size, and zeta-potential of NPs.

RESULTS

NPs had a spherical shape and a mean particle size ranging between 135 and 220 nm. FTIR and DSC studies results were indicative of successful ionic gelation with the drug being dispersed in its amorphous form within CS-Pluronic^® matrix. Maximum EE% reaching 57.00 ± 12.90% was achieved using Pluronic^®-123 based NPs. NPs exhibited a sustained release profile over 48 h. The MF-loaded NPs sensitized RKO CRC cells relative to drug alone.

CONCLUSION

The reported results highlighted the novel utility of the developed NPs in the arena of colon cancer treatment.

In Vitro and In Vivo Modeling of Hydroxypropyl Methylcellulose (HPMC) Matrix Tablet Erosion Under Fasting and Postprandial Status

Purpose

To develop a model linking in vitro and in vivo erosion of extended release tablets under fasting and postprandial status.

Methods

A nonlinear mixed-effects model was developed from the in vitro erosion profiles of four hydroxypropyl methylcellulose (HPMC) matrix tablets studied under a range of experimental conditions. The model was used to predict in vivo erosion of the HPMC matrix tablets in different locations of the gastrointestinal tract, determined by magnetic marker monitoring. In each gastrointestinal segment the pH was set to physiological values and mechanical stress was estimated in USP2 apparatus rotation speed equivalent.

Results

Erosion was best described by a Michaelis–Menten type model. The maximal HPMC release rate (V_MAX) was affected by pH, mechanical stress, HPMC and calcium hydrogen phosphate content. The amount of HPMC left at which the release rate is half of V_MAX depended on pH and calcium hydrogen phosphate. Mechanical stress was estimated for stomach (39.5 rpm), proximal (93.3 rpm) and distal (31.1 rpm) small intestine and colon (9.99 rpm).

Conclusions

The in silico model accurately predicted the erosion profiles of HPMC matrix tablets under fasting and postprandial status and can be used to facilitate future development of extended release tablets.

Electronic supplementary material

The online version of this article (doi:10.1007/s11095-017-2113-7) contains supplementary material, which is available to authorized users.