The presence of contaminations in sewage sludge - The current situation

Comparative life cycle assessment of sewage sludge drying by solar and thermal drying technologies

Sewage sludge management is a critical challenge requiring sustainable treatment solutions. Drying is an essential pre-treatment step for utilizing sludge in waste-to-energy systems. Although drying is an essential step in sludge management, it has often been represented in a simplified manner using general assumptions in life cycle assessment (LCA) studies aimed at evaluating environmental impacts and greenhouse gas emissions. In many assessments, sludge drying has been identified as the most environmentally burdensome stage of sludge management due to its high energy demand, with solar drying frequently proposed as a low-energy alternative. Given these findings, optimizing the environmental performance of the sludge drying process is crucial for reducing the overall life cycle impacts of sludge management. Accordingly, this study aims to compare the environmental impacts of thermal drying technologies (belt, fluidized bed, and rotary) and solar drying using a gate-to-gate LCA approach. Additionally, impact reduction scenarios were assessed, including renewable energy integration and adjusting the final solids content of sludge. The LCA was performed using the ReCiPe 2016 Endpoint (H) method. Results indicate that using photovoltaic electricity and waste-incineration steam can significantly lower the environmental impacts of belt and rotary dryers, making them comparable to solar drying. On the other hand, solar drying's high land demand remains a major limitation. These findings provide key insights for decision-makers, helping optimize sludge drying processes with lower environmental impacts. The study highlights the importance of technology-specific strategies and renewable energy integration in wastewater treatment plants.

Py-Azo-decorated covalent organic frameworks as a structure-responsive mass spectrometry probe for high-sensitivity and high-throughput screening of trace toxic chemicals in complex samples

A Py-azo-decorated covalent organic framework (Py-Azo-COF) was utilized as a structure-responsive probe for SALDI-TOF MS analysis. Benefiting from its unique structure, the Py-Azo-COF probe exhibited high affinity, sensitivity (LOD: 2-200 fg mL-1), reproducibility, salt tolerance, and low background interference, enabling efficient screening of diverse trace toxic chemicals in complex samples.

Effects of thermal treatment and anaerobic digestion on pathogen and ARG removal in bio-solids from a co-treatment plant for sewage and fecal sludge

This study assesses the bacterial pathogen load in secondary sludge from a sewage treatment plant that co-processes fecal sludge with municipal wastewater over 1 year. It also examines how anaerobic digestion and temperature treatment affect pathogens (including bacteria and nematodes) and antibiotic-resistance genes in secondary sludge. Furthermore, it assesses the impact of bacterial pathogen survival during co-digestion of secondary sludge with food waste, bakery waste, and flower waste. A fluctuating viable pathogenic bacterial count with no consistent trend was observed during the 1-year period. Staphylococcus spp. remained consistently abundant with log values of 6.2-7.4 CFU/g TS. Meanwhile, E. coli and Salmonella spp. ranged from 1.3 to 4.6 and 2.7 to 4.6 log CFU/g TS, respectively, significantly exceeding the Class A biosolid limits. Mesophilic anaerobic digestion for 21 days showed limited pathogen removal, requiring 55 days for complete elimination of Gram-negative bacteria, while Staphylococcus spp. exhibited only a 0.4-log reduction. Treatment at 70 °C for 60 min reduced 2-4 log units (p < 0.05) of all Gram-negative bacteria tested, whereas 100 °C for 30 min was required to eliminate Staphylococcus spp. Complete eradication was not achieved for ARGs or nematodes after anaerobic digestion or treatment at 100 °C for up to 90 min. Co-digestion of secondary sludge with food, bakery, and flower waste over 21 days effectively eliminated most bacterial pathogens, achieving complete removal (up to 100%) of Salmonella spp., E. coli, Vibrio spp., and Klebsiella spp. Meanwhile, Staphylococcus spp. persisted during co-digestion, where the extent of reduction varied with the co-substrate used.

Enhancement of the Plant-Accessible Phosphate Fraction in Sewage Sludge Ashes by Na+ or K+ Addition Prior to Combustion

With the aim of transforming sewage sludge into a P-fertiliser material in a single combustion step, the chemical processes underlying sewage sludge combustion were analysed using powder X-ray diffraction (P-XRD), infrared spectroscopy (IR), thermogravimetric (TGA) as well as elemental analyses (EA). In addition to the combustion of sewage sludge on its own ("mono-combustion"), additions of different additives prior to the combustion step were also carried out. Based on the very positive effects of the additives sodium and potassium carbonate on the obtained ashes concerning their phosphate solubilities in neutral ammonium citrate (NAC) solution, sewage sludge combustions after additions of Na2CO3 or K2CO3 were investigated in detail. We found that these additions altered the main phosphate-containing product found in the ashes from whitlockite (Ca9(Mg,Fe)(PO3OH)(PO4)6), a hardly plant-accessible species, to other phosphate containing compounds such as buchwaldite (CaNaPO4), which is known for a long time as a very good P-source for plants. Consecutive greenhouse experiments with maize (Zea mays L.) as test plant confirmed the results of the chemical analyses and demonstrated that Na- or K-ashes obtained from a "co-combustion" of sewage sludge mixed with alkali carbonates exhibit relative P-fertilising efficiencies of up to ~80 % in comparison to commercial superphosphate, making these materials promising surrogate phosphate mineral sources for agricultural production.

Decontamination of Sewage Wastewater by an Aeration Method Utilizing Water Hardness-Reducing Spirulina platensis

This study investigates the potential of Spirulina platensis, a blue-green algae species, for the remediation of sewage wastewater, providing a sustainable approach to wastewater management. Over a 20-day period, with aeration at 3 L/min, Spirulina effectively reduced key pollutants, including chemical oxygen demand (COD), phosphate, nitrate, magnesium, and other impurities. Advanced analyses using FTIR, SEM, and EDX revealed that the primary mechanism of remediation was the adsorption of contaminants onto Spirulina. In addition, rapid photosynthetic growth under sunlight (200-400 μmol photons/m2/s) facilitated nutrient absorption while producing high-value biomass rich in proteins and essential nutrients. This dual-purpose approach not only purifies wastewater but also enables resource recovery, reducing the need for chemical fertilizers and promoting circular economy practices. Furthermore, the process contributes to carbon sequestration, offering a viable method to lower greenhouse gas emissions. The findings highlight Spirulina platensis as an eco-friendly, innovative solution with significant environmental and socio-economic benefits.

Dioxin-like polychlorinated biphenyls (dl-PCB) in hydrochars and biochars: Review of recent evidence, pollution levels, critical gaps, formation mechanisms and regulations

Contamination of chars with dioxin-like polychlorinated biphenyls (dl-PCB) significantly limits their use and hinders their deployment in the circular bioeconomy, specifically in applications that may lead to dietary exposure. Here, for the first time, we review the levels of contamination of chars produced from pyrolysis and hydrothermal carbonisation (HTC) with dl-PCB congeners. We conduct a detailed and critical examination of the role played by the processing parameters, such as temperature and residence time, and the reaction mechanisms, to detoxify the biomass under an oxygen-free atmosphere during its valorisation. The PCB-based toxicity of biomass depends mostly on the abundance of dl-PCB in the raw material, and on the dechlorination and other transformation processes that operate during the treatment. The key dechlorination steps make the toxicity of hydrochars pass through a maximum with increasing treatment time, whereas the toxicity of biochars in pyrolysis decreases monotonically. Pyrolysis displays more complex mechanistic pathways of volatilisation, dechlorination, degradation of PCB rings, minor de novo formation of dl-PCB in case of air leaks, and concentrating persistent organic pollutants (POP) in char matrices. In contrast, the mechanisms responsible for the evolution of toxicity in HTC processes comprise the dechlorination, possible chlorine position shift, and biomass densification. The kinetic model developed in this review affords insight into the evolution of the hydrochar toxicity that depends on process temperature and treatment time. The dl-PCB concentrations in treated biomass generally range from 1.06 ng WHO2005-TEQ (kg DM)-1 to 11.7 ng WHO2005-TEQ (kg DM)-1, whereas for biochars produced from contaminated sediments the toxicity varies from 0.00662 ng WHO1998-TEQ (kg DM)-1 to 1.42 ng WHO1998-TEQ (kg DM)-1. DM stands for dry matter, TEQ for toxic equivalency, and WHO1998 means the application of the toxic equivalency factors (TEF) set by the World Health Organization (WHO) in 1998 to calculate the TEQ. Finally, we identify the crucial gaps in the literature, review the regulations governing the use of biomass in feed and in the environment, and provide suggestions for future research. The findings in this article provide both the technical understanding of how to minimise the formation of dl-PCB in the production of chars and suggest modifications to the current guidelines. The latter will increase the consumer's trust in valorised biomass, leading to its wider acceptance in the circular bioeconomy as feed supplements and soil additives.

Heavy metal(loid)s and nutrients in sewage sludge in Portugal - Suitability for use in agricultural soils and assessment of potential risks

The presence of heavy metal(loid)s in sewage sludge is a cause of concern and an obstacle to its agricultural valorisation. This study analysed the elemental composition of sewage sludge from 42 Portuguese wastewater treatment plants (WWTPs) during summer and winter, investigating heavy metal(loid) contamination, nutrient content, and potential risks related to sludge application to agricultural soils. Levels of 8 heavy metal(loid)s were investigated, ranging from not detected (Hg) to 5120 mg kg-1 dw (Zn), decreasing in the order Zn > Cu > Cr > Ni > Pb > As>Cd > Hg. The legal requirements for agricultural use of sludge were overall met, but elevated levels of Zn and Cu, linked to industrial sources, exceeded the permitted limits in 3 WWTPs. On average, N, P, K, Mg, and Ca comprised 80 % of the sludge nutrient profile. No seasonal variations were found, but sludge composition varied with WWTP size, wastewater origin, and between thickened and digested samples. Environmental hazard indicators showed significant sludge contamination with Zn, Cu, and Cd. However, the geoaccumulation index, potential ecological risk indicators, and risk characterization ratios showed no significant risks to sludge-amended soils, assuming a single application of 5 tons ha-1. Human health risk assessment for workers handling sewage sludge identified dermal contact as the main route of exposure, with non-carcinogenic risk for Cr and carcinogenic risk for Ni and Cr at the highest reported levels. Sewage sludge produced in Portugal was considered suitable for agricultural use, provided that it is closely monitored and well-managed to meet the needs of crops and receiving soils, while mitigating environmental risks.

Microbial extracellular polymeric substances in the environment, technology and medicine

Microbial biofilms exhibit a self-produced matrix of extracellular polymeric substances (EPS), including polysaccharides, proteins, extracellular DNA and lipids. EPS promote interactions of the biofilm with other cells and sorption of organics, metals and chemical pollutants, and they facilitate cell adhesion at interfaces and ensure matrix cohesion. EPS have roles in various natural environments, such as soils, sediments and marine habitats. In addition, EPS are relevant in technical environments, such as wastewater and drinking water treatment facilities, and water distribution systems, and they contribute to biofouling and microbially influenced corrosion. In medicine, EPS protect pathogens within the biofilm against the host immune system and antimicrobials, and emerging evidence suggests that EPS can represent potential virulence factors. By contrast, EPS yield a wide range of valuable products that include their role in self-repairing concrete. In this Review, we aim to explore EPS as a functional unit of biofilms in the environment, in technology and in medicine.

Antimicrobial agents in agricultural fertilizers produced from sewage sludge - A cause for concern?

The production of organic-mineral fertilizers from sewage sludge is one of the ecological options in their management. Though, pharmaceuticals and their derivatives, which accumulate in the sludge, could be a problem due to their impacts on the environment. This manuscript aimed at better understanding of risks posed by antimicrobial agents (AAs) in sludge-based fertilizers. Sewage sludge and sewage-based fertilizers (from two sewage treatment plants in two cities in Poland) were tested for 99 AAs. 26 AAs were detected in the sludge at concentrations reaching 112,000 μg/kg. Several AAs were successfully removed during the sludge treatment process (sulfasalazine, sulfapyridine, isoniazid, isonicotinic acid, erythromycin, clarithromycin, erythromycin N-desmethyl, clarithromycin N-desmethyl, azithromycin N-desmethyl, emtricitabine, ANP) with reduction ranging from 34 % to 96,5 %. It is worth noting that penicillin V and ofloxacin/levofloxacin were recorded at higher concentrations in the fertilizer than in the sludge, which indicates the process of concentration of these AAs as a result of drying the fertilizer. Penicillin V content increased by 153 % and 191 % in WWTP 1 and WWTP 2 samples, respectively. The level of ofloxacin/levofloxacin increased by 70 % in fertilizer from WWTP 1, and decreased by 40 % in fertilizer from WWTP 2. The AAs leaching test revealed that 7 AAs (isoniazid, sulfapyridine, ofloxacin/levofloxacin, clindamycin, azithromycin, isonicotinic acid, pyrazinoic acid 5-hydroxy-) have potential to leach into the receiving soil environment after sludge-based fertilizer application. The risk factor (RQ) for sulfapyridine, ofloxacin/levofloxacin, isonicotinic acid and linezolid was too low to estimate, below 0.1, so the risk has mild environmental impacts. An RQ value of isoniazid and clindamycin ranging from 0.1 to 1.0 indicates a low risk to soil. Azithromycin RQ >36 denoted a high environmental risk. This warrants further study to understand risks from AAs present in sludge-based products.

Parasites in Sewage: Legal Requirements and Diagnostic Tools

Despite the vast amount of water on Earth, only a small percent is suitable for consumption, and these resources are diminishing. Moreover, water resources are unevenly distributed, leading to significant disparities in access to drinking water between countries and populations. Increasing consumption and the expanding human population necessitate the development of novel wastewater treatment technologies and the use of water treatment byproducts in other areas, such as fertilisers. However, water treatment sludge often cannot be used to enhance crop production due to the presence of parasite eggs, particularly from roundworms (Ascaridae family), which are resistant to environmental factors and can pose a threat for several years. Legislation prohibits the use of sludge containing parasite eggs as fertiliser. In some cases, water may not contain parasite eggs but larvae, which require different detection methods. Additionally, the presence of eggs does not necessarily indicate danger since they may lose infectivity due to prolonged storage or exposure to chemical compounds in the sewage. This paper reviews European Union regulations on wastewater treatment, the selected parasitic diseases related to the presence of parasites in wastewater, the spectrum of detection methods, and highlights differences in viability and invasiveness, which is intended to draw attention to the need to determine both biological properties of parasites.

In-utero exposure to real-life environmental chemicals disrupts gene expression within the hypothalamo-pituitary-gonadal axis of prepubertal and adult rams

Environmental chemicals (ECs) have been associated with a broad range of disorders and diseases. Daily exposure to various ECs in the environment, or real-life exposure, has raised significant public health concerns. Utilizing the biosolids-treated pasture (BTP) sheep model, this study demonstrates that in-utero exposure to a real-life EC mixture disrupts hypothalamo-pituitary-gonadal (HPG) axis gene expression and reproductive traits in prepubertal (8-week-old, 8w) and adult (11-month-old) male sheep. Ewes were maintained on either BTP or pastures fertilized with inorganic fertilizer [control (C)] from approximately one month prior to insemination until around parturition. Thereafter, all animals were kept under control conditions. Effects on reproductive parameters including testosterone concentrations and the expression of key genes in the HPG axis were evaluated in eight-week-old and adult male offspring from both C and biosolids-exposed (B) groups. Results showed that, at 8w, relative to C (n = 11), B males (n = 11) had lower body weight, and altered testicular expression of HSD3B1, LHR and HSD17B3, BMP4, ABP, P27kip and CELF1. Principal component analysis (PCA) identified two 8w B subgroups, based on hypothalamic expression of GnRH, ESR1, and AR, and pituitary expression of KISSR. The two subgroups also exhibited different serum testosterone concentrations. The largest biosolids effects were observed in the hypothalamus of adult rams with NKB, ESR1, KISS1, AR, DLK1 and GNRH1 mRNA expression differing between B (n = 10) and C (n = 11) rams. Testicular steroidogenic enzymes CYP11A1 and HSD3B1 mRNA expression also differed between exposure groups. PCA identified two adult B subgroups, with BS1 (n = 6) displaying hypothalamic effects and BS2 (n = 4) both hypothalamic and testicular effects. The subgroups also differed in circulating testosterone concentrations. These findings demonstrate that exposure to a real-life EC mixture may predispose some males to infertility, by disrupting key functional HPG markers before puberty with consequent downstream effects on steroid hormones and spermatogenesis.

Simultaneous targeted and non-targeted analysis of contaminants in fertilizers in Quebec, Canada

In this study, an LC-MS based analytical method was developed and validated for the simultaneous targeted analysis (14 bisphenols and 14 plasticizers) and suspect screening of other plastic-related contaminants in various types of fertilizers. The ultrasound-assisted extraction method showed overall satisfactory performances, achieving a median absolute recovery of 85 % for the target compounds in different types of fertilizers. The method was applied to sixteen different types of fertilizers, including fertilizing residual materials (n = 8 types), one cattle manure, and seven mineral fertilizers collected in Quebec, Canada in 2022 and 2023. Relatively higher levels of the targeted bisphenols and plasticizers were detected in some fertilizing residual materials, such as municipal biosolids and deinking residues. 4-Hydroxyphenyl 4-isoprooxyphenylsulfone (D-8) and bis(2-ethylhexyl) phthalate (DEHP) were dominant contaminants in these matrixes, with concentrations up to 35.6 and 64.7 μg g-1 dw, respectively. A non-targeted workflow was successfully applied to municipal biosolids and deinking residues, and >30 contaminants were identified across multiple chemical families at level 1 identification confidence, with most of them previously unreported in various types of fertilizers. For example, new color developers, N-(2-((Phenylcarbamoyl)amino)phenyl)benzenesulfonamide (NKK-1304) and 2,4-bis(phenylsulfonyl)phenol (DBSP), were reported in deinking residues. This work illustrates the complexity of the contaminant mixtures in fertilizers such as municipal biosolids and deinking residues.

PFAS, PCBs, PCDD/Fs, PAHs and extractable organic fluorine in bio-based fertilizers, amended soils and plants: Exposure assessment and temporal trends

Bio-based fertilizers (BBFs) produced from organic waste contribute to closed-loop nutrient cycles and circular agriculture. However, persistent organic contaminants, such as per- and poly-fluoroalkyl substances (PFAS), polychlorobiphenyls (PCBs), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), as well as polyaromatic hydrocarbons (PAHs) can be present in organic waste or be formed during valorization processes. Consequently, these hazardous substances may be introduced into agricultural soils and the food chain via BBFs. This study assessed the exposure of 84 target substances and extractable organic fluorine (EOF) in 19 BBFs produced from different types of waste, including agricultural and food industrial waste, sewage sludge, and biowaste, and through various types of valorization methods, including hygienization at low temperatures (<150 °C) as well as pyrolysis and incineration at elevated temperatures (150-900 °C). The concentrations in BBFs (ΣPFOS & PFOA: <30 μg kg-1, Σ6PCBs: <15 μg kg-1, Σ11PAHs: <3 mg kg-1, Σ17PCDD/Fs: <4 ng TEQ kg-1) were found to be below the strictest thresholds used in individual EU countries, with only one exception (pyrolyzed sewage sludge, Σ11PAHs: 5.9 mg kg-1). Five BBFs produced from sewage sludge or chicken manure contained high concentrations of EOF (>140 μg kg-1), so monitoring of more PFAS is recommended. The calculated expected concentrations in soils after one BBF application (e.g. PFOS: <0.05 μg kg-1) fell below background contamination levels (PFOS: 2.7 μg kg-1) elsewhere in the literature. This was confirmed by the analysis of BBF-amended soils from field experiments (Finland and Austria). Studies on target legacy contaminants in sewage sludge were reviewed, indicating a general decreasing trend in concentration with an apparent half-life ranging from 4 (PFOS) to 9 (PCDD/Fs) years. Modelled cumulative concentrations of the target contaminants in agricultural soils indicated low long-term risks. Concentrations estimated and analyzed in cereal grains were low, indicating that exposure by cereal consumption is well below tolerable daily intakes.

Perspectives on innovative non-fertilizer applications of sewage sludge for mitigating environmental and health hazards

As waste production increases and resources become limited, sewage sludge presents a valuable resource with potential beyond traditional land use and incineration. This review emphasizes exploring innovative non-fertilizer applications of sewage sludges and advocates for viewing wastewater treatment plants as sources of valuable feedstock and carbon sequestration. Innovative uses include integrating sewage sludge into construction materials such as asphalt pavements, geopolymer, cementitious composites, and masonry blocks. These methods not only immobilize heavy metals and mitigate environmental hazards but also support carbon sequestration, contrasting with incineration and land application methods that release carbon into the atmosphere. The review also addresses emerging technologies like bio-adhesives, bio-binders for asphalt, hydrogels, bioplastics, and corrosion inhibitors. It highlights the recovery of valuable materials from sewage sludge, including phosphorus, oils, metals, cellulose, and polyhydroxyalkanoates as well as enzyme production. By focusing on these non-fertilizer applications, this review presents a compelling case for re-envisioning wastewater treatment plants as sources of valuable feedstock and carbon sequestration, supporting global efforts to manage waste effectively and enhance sustainability.

Comparison of antimicrobial resistant Enterobacterales isolates from the dairy production environment in low and high zinc containing regions

Heavy metals occur naturally in the environment, and their concentration varies in soil across different regions. However, the presence of heavy metals may influence the antimicrobial resistance (AMR) in bacterial populations. Therefore, the objective of this study was to investigate and characterise the antimicrobial resistance profiles of Enterobacterales in soil and bovine milk filters from high and low zinc-containing regions in Ireland. In total, 50 soil samples and 29 milk filters were collected from two geographic locations with varying soil zinc concentrations. Samples were cultured for the enumeration and detection of Enterobacterales. Specifically, extended-spectrum beta-lactamase-producing Enterobacterales, carbapenem-resistant Enterobacterales and ciprofloxacin-resistant Enterobacterales were isolated using selective media. Species identification was performed using MALDI-TOF. The phenotypic resistance profiles of selected Enterobacterales were determined by disk diffusion testing, following EUCAST and CLSI criteria; while, the genotypic resistance profiles of the same isolates were determined by whole genome sequencing (WGS). Heavy metal concentrations were also measured for all soil samples. A total of 40 antimicrobial resistant Enterobacterales were identified in soil (n = 31) and milk filters (n = 9). The predominant species detected in the high zinc-containing region was Escherichia coli in both sample types (soil n = 10, milk filters n = 2), while in the low zinc-containing region Serratia fonticola was predominant in soil samples (n = 8) and E. coli in milk filters (n = 4). Ten E. coli isolates identified from soil samples in the high zinc-containing region were multidrug resistant, showing resistance to all the antimicrobials tested, except for carbapenems. The WGS findings confirmed the phenotypic resistance results. Moreover, zinc resistance-associated genes and genes encoding for efflux pumps were identified. The current study revealed distinct phenotypic resistance profiles of Enterobacterales in low and high zinc-containing regions, and highlighted the benefit of utilising milk filters for AMR surveillance in dairy production.

Potential for nutrients reuse, carbon sequestration, and CO2 emissions reduction in the practice of domestic and industrial wastewater recycling into agricultural soils: A review

This review assesses the feasibility of reusing treated wastewater for irrigation in agricultural soils as a strategy for nutrients recycling and mitigation of CO2 emissions. Through a literature review, it was examined wastewater sources enriched with carbon and nutrients, including municipal wastewater and associated sludge, vinasse, swine wastewater, as well as wastewater from the food industry and paper and pulp production. The review also explores the dynamics of organic matter within the soil, discussing the aspects related to its potential conversion to CO2 or long-term storage. It was found that industrial wastewaters, owing to their higher organic matter and recalcitrance, exhibit greater potential for carbon storage. However, the presence of pollutants in wastewater necessitates careful consideration, particularly concerning their impact on soil quality. Toxic metals, microplastics, and organic compounds emerged as significant contaminants that could accumulate in the soil, posing risks to ecosystem health. To mitigate the environmental impacts, it was evaluated various wastewater treatment technologies and their associated carbon emissions. While advanced treatments may effectively reduce the contaminant load and mitigate soil impacts, their adoption is often associated with an increase in CO2 emissions. Membrane bioreactors, microfiltration, ultrafiltration, and up-flow anaerobic sludge blanket reactors were identified as promising technologies with lower carbon footprints. Looking ahead, future research should aim to enhance the understanding of carbon dynamics in soil and validate the environmental impacts of treated wastewater disposal. Despite remaining uncertainties, the literature indicates a positive outlook for wastewater recycling in soil, offering a viable strategy for carbon storage and mitigation of greenhouse gas emissions.

Novel Insights into Alkyl Polyglucoside Biosurfactant Promoting Anaerobic Dark Fermentation for Hydrogen Production in Sludge

Anaerobic fermentation of excess sludge (ES) for hydrogen production is a crucial strategy for resource utilization and environmentally friendly treatment. However, the low hydrolysis efficiency of ES and the depletion of produced hydrogen have become the limiting factors for low hydrogen yield. This study innovatively applied the bio-based surfactant alkyl polyglucoside (APG) to enhance the efficiency of dark fermentation for hydrogen production from ES. When the APG content was 100 mg/g (calculated based on total suspended solids), the maximum hydrogen production reached 17.8 mL/g VSS, approximately 3.7 times that in the control group. Mechanistic analysis revealed that APG promoted the release of organic matter from ES. APG also facilitated the release of soluble protein and soluble polysaccharide, increasing the organic matter reduction rate to 34.8%, significantly higher than other groups. APG enhanced the accumulation of volatile fatty acids and promoted the proportion of small molecular carboxylic acids. Enzyme activity analysis revealed that APG promoted the activity of hydrolytic enzymes but inhibited the activity of hydrogen-consuming enzymes. The research results provide a green and environmentally friendly strategy for the efficient resource utilization of ES.

Occurrence and dissipation mechanisms of organic contaminants during sewage sludge anaerobic digestion: A critical review

Sewage sludge, a complex mixture of contaminants and pathogenic agents, necessitates treatment or stabilization like anaerobic digestion (AD) before safe disposal. AD-derived products (solid digestate and liquid fraction) can be used as fertilizers. During AD, biogas is also produced, and used for energy purposes. All these fractions can be contaminated with various compounds, whose amount depends on the feedstocks used in AD (and their mutual proportions). This paper reviews studies on the distribution of organic contaminants across AD fractions (solid digestate, liquid fraction, and biogas), delving into the mechanisms behind contaminant dissipation and proposing future research directions. AD proves to be a relatively effective method for removing polychlorinated biphenyls, polycyclic aromatic hydrocarbons, pharmaceuticals, antibiotic resistance genes and hydrocarbons. Contaminants are predominantly removed through biodegradation, but many compounds, especially hydrophobic (e.g. per- and polyfluoroalkyl substances), are also sorbed onto digestate particles. The process of sorption is suggested to reduce the bioavailability of contaminants. As a result of sorption, contaminants accumulate in the largest amount in the solid digestate, whereas in smaller amounts in the other AD products. Polar pharmaceuticals (e.g. metformin) are particularly leached, while volatile methylsiloxanes and polycyclic aromatic hydrocarbons, characterized by a high Henry's law constant, are volatilized into the biogas. The removal of compounds can be affected by AD operational parameters, the type of sludge, physicochemical properties of contaminants, and the sludge pretreatment used.

Metal nanoparticles and pesticides under global climate change: Assessing the combined effects of multiple abiotic stressors on soil microbial ecosystems

The soil is a vital resource that hosts many microorganisms crucial in biogeochemical cycles and ecosystem health. However, human activities such as the use of metal nanoparticles (MNPs), pesticides and the impacts of global climate change (GCCh) can significantly affect soil microbial communities (SMC). For many years, pesticides and, more recently, nanoparticles have contributed to sustainable agriculture to ensure continuous food production to sustain the significant growth of the world population and, therefore, the demand for food. Pesticides have a recognized pest control capacity. On the other hand, nanoparticles have demonstrated a high ability to improve water and nutrient retention, promote plant growth, and control pests. However, it has been reported that their accumulation in agricultural soils can also adversely affect the environment and soil microbial health. In addition, climate change, with its variations in temperature and extreme water conditions, can lead to drought and increased soil salinity, modifying both soil conditions and the composition and function of microbial communities. Abiotic stressors can interact and synergistically or additively affect soil microorganisms, significantly impacting soil functioning and the capacity to provide ecosystem services. Therefore, this work reviewed the current scientific literature to understand how multiple stressors interact and affect the SMC. In addition, the importance of molecular tools such as metagenomics, metatranscriptomics, proteomics, or metabolomics in the study of the responses of SMC to exposure to multiple abiotic stressors was examined. Future research directions were also proposed, focusing on exploring the complex interactions between stressors and their long-term effects and developing strategies for sustainable soil management. These efforts will contribute to the preservation of soil health and the promotion of sustainable agricultural practices.

Lignin: A valuable and promising bio-based absorbent for dye removal applications

The importance of environmental issues and the existence of humans have led to the recognition of environmental concerns as the main risk to modern life. Notably, one major concern for protecting and managing the environment and human health is the presence of dyes in wastewater. Therefore, before discharging wastewater into mainstream water, it is crucial to remove dyes. Among all lignocellulosic materials, lignin is a highly fragrant biopolymer. Its abundant availability, complex structure, and numerous functional moieties, including hydroxyl, carboxyl, and phenolic, are used in different chemicals and applications. Based on this, lignin is a very useful green material for adsorption, specifically in removing both heavy metals and organic pollutants from wastewater. This article describes the use of lignin-based adsorbents as a recent breakthrough in the removal of dye from aqueous solutions. On the other hand, the review intends to encourage readers to study both established and novel avenues in lignin-based dye removal materials.

Biochar from Co-Pyrolyzed Municipal Sewage Sludge (MSS): Part 1: Evaluating Types of Co-Substrates and Co-Pyrolysis Conditions

With the increasing production of municipal sewage sludge (MSS) worldwide, the development of efficient and sustainable strategies for its management is crucial. Pyrolysis of MSS offers several benefits, including volume reduction, pathogen elimination, and energy recovery through the production of biochar, syngas, and bio-oil. However, the process can be limited by the composition of the MSS, which can affect the quality of the biochar. Co-pyrolysis has emerged as a promising solution for the sustainable management of MSS, reducing the toxicity of biochar and improving its physical and chemical properties to expand its potential applications. This review discusses the status of MSS as a feedstock for biochar production. It describes the types and properties of various co-substrates grouped according to European biochar certification requirements, including those from forestry and wood processing, agriculture, food processing residues, recycling, anaerobic digestion, and other sources. In addition, the review addresses the optimization of co-pyrolysis conditions, including the type of furnace, mixing ratio of MSS and co-substrate, co-pyrolysis temperature, residence time, heating rate, type of inert gas, and flow rate. This overview shows the potential of different biomass types for the upgrading of MSS biochar and provides a basis for research into new co-substrates. This approach not only mitigates the environmental impact of MSS but also contributes to the wider goal of achieving a circular economy in MSS management.

Guidelines for efficient nitrogen preservation in sewage sludge-based fertilizers

This study explores sustainable methods to mitigate nitrogen (N) loss in agriculture amid rising food demands and limited arable land. It examines sewage sludge (SS) as an alternative to synthetic N fertilizers. SS is rich in nitrogen (4.21 ± 0.42 %) and phosphorus (3.60 ± 0.72 %), making it suitable for nutrient recovery and soil enhancement. Unfavorable sludge management methods result in the loss of 950,000 tons of nitrogen, meeting almost 10 % of the EU's nitrogen fertilization demand. This research evaluates SS treatment methods, including chemical conversion, thermal treatment, and biological composting, focusing on nitrogen conservation efficiency. Results show nitrogen loss during hydrolysis is minimized at pH 4 to 8 but increases significantly as ammonia (NH3) at pH 9 to 11, ranging from 4.2 % to 9 %. Neutralizing the hydrolysate is crucial; using solid KOH resulted in 13.5 % nitrogen loss, 11 times more than using slightly alkaline ash (1.22 %). Adding ash during drying reduced nitrogen emissions by 30 % compared to traditional drying at 105 °C. Improving the C/N ratio with food residues reduced nitrogen losses by 46.3 % during composting. These findings highlight the importance of pH control in chemical processes and temperature regulation in thermal treatments. Adding residues from other processes, such as biomass combustion waste, enhances SS processing conditions. Understanding nitrogen retention mechanisms is crucial for the environmental sustainability of SS usage. Efficient nitrogen retention strategies improve the fertilization value of SS and reduce its environmental footprint by lowering greenhouse gas emissions, particularly ammonia. Reducing nitrogen loss during SS treatment significantly lowers ammonia emissions, a major contributor to greenhouse gas emissions. These results help determine optimal methods for managing and processing SS to minimize emissions and increase agricultural usability.

Biotechnological polyphosphate as an opportunity to contribute to the circularization of the phosphate economy

Polyphosphates, chains of polymerized phosphate subunits, are used as food additives for various applications such as conservation, water retention, and pH buffering. Currently, the value chain of phosphates is linear, based on mining fossil phosphate rock, which is anticipated to be depleted in a few hundred years. With no replacement available, a transition to a circular phosphate economy, to which biological systems can contribute, is required. Baker's yeast can hyperaccumulate phosphate from various phosphate-rich waste streams and form polyphosphates, which can be used directly or as polyphosphate-rich yeast extract with enhanced properties in the food industry. By maturing the technology to an industrial level and allowing upcycled waste streams for food applications, substantial contributions to a sustainable phosphate economy can be achieved.

Heavy metals and potential health risk assessment of Lactuca sativa and Daucus carrota from soil treated with organic manures and chemical fertilizer

The large-scale production of food crops with heavy application of chemical fertilizers in the effort to meet the astronomical increase in food demands may be counterproductive to the goal of food security. This study investigated the effect of different soil treatments on the levels of heavy metals (Cr, Cu, Fe, Ni, Pb, and Zn) in two types of vegetables Lactuca sativa (lettuce) and Daucus carrota (carrot). The potential carcinogenic and non-carcinogenic health risks from their consumption were also evaluated. Planting experiment was set up in a randomized block design, with different soil treatments of soil + cow dung (CD), soil + sewage sludge (SS), soil + chemical fertilizer (nitrogen-phosphorus-potassium (NPK)), and untreated soil (UNTRD). The vegetables were harvested at maturity, washed with distilled water, and subjected to an acid digestion process before the levels of heavy metals were measured by inductively coupled plasma spectrometry (ICP-MS). The mean concentrations of the metals in the vegetables across all treatments were below the maximum permissible limits. The pattern of heavy metal accumulation by the vegetables suggested that the lettuce from SS treatment accumulated higher concentrations of heavy metals like Cr (0.20 mg/kg), Cu (3.91 mg/kg), Ni (0.33 mg/kg), and Zn (20.44 mg/kg) than carrot, with highest concentrations of Fe (90.89 mg/kg) and Pb (0.16 mg/kg) recorded in lettuce from NPK treatment. The bioaccumulation factor (BAF) showed that lettuce, a leafy vegetable, has bioaccumulated more heavy metals than carrot, a root vegetable. The BAF was generally below the threshold value of 1 in both vegetables, except in lettuce from NPK and CD treatments and carrot from NPK treatments, with BAF values of 1.6, 1.69, and 1.39, respectively. The cancer risk assessment factors were well below the unacceptable maximum range of 10-4 suggesting that consuming these vegetables might not expose an individual to potential risk of cancer development. The hazard quotient estimations were below the threshold values of 1 for all heavy metals; however, the hazard index (HI) values of 1.27 and 1.58 for lettuce from NPK and SS treatments indicate a potential non-carcinogenic health risk to consumers from intake of all the heavy metals.

Occurrence and fate of pharmaceuticals and personal care products in a wastewater treatment plant with Bacillus bio-reactor treatment

Pharmaceuticals and personal care products (PPCPs) have attracted wide attention due to their environmental impacts and health risks. PPCPs released through wastewater treatment plants (WWTPs) are estimated to be 80 %. Nevertheless, the occurrence of PPCPs in the WWTPs equipped with Bacillus spec.-based bioreactors (BBR) treatment system remains unclear. In this study, sludge and waste water samples were collected during separate winter and summer sampling campaigns from a typical BBR treatment system. The results indicate that out of 58 target PPCPs, 27 compounds were detected in the waste water (0.06-1900 ng/L), and 23 were found in the sludge (0.6-7755 ng/g dw). Paraxanthine was the chemical of the highest abundance in the influent due to the high consumption of the parent compounds caffeine and theobromine. The profile for PPCPs in the wastewater and sludge exhibited no seasonal variation. Overall, the removal of target PPCPs in summer is more effective than the winter. In the BBR bio-reactor, it was found that selected PPCPs (at ng/L level) can be completely removed. The efficiency for individual PPCP removal was increased from 1.0 % to 50 % in this unit, after target specific adjustments of the process. The effective removal of selected PPCPs by the BBR treatment system is explained by combined sorption and biodegradation processing. The re-occurrence of PPCPs in the wastewater was monitored. Negative removal efficiency was explained by the cleavage of Phase II metabolites after the biotransformation process, and the lack of equilibrium for PPCPs in the sludge of the second clarifier. A compound specific risk quotient (RQ) was calculated and applied for studying the potential environmental risks. Diphenhydramine is found with the highest environmental risk in wastewater, and 15 other PPCPs show negligible risks in sewage sludge.

Thermo-catalytic pyrolysis of sewage sludge and techno-economic analysis: The effect of synthetic zeolites and natural sourced catalysts

This work focuses to the value added utilization of animal sewage sludge into gases, bio-oil and char using synthetic zeolite (ZSM-5 and Y-zeolite) and natural sourced (diatomite, kaolin, perlite) materials as catalysts. Pyrolysis was performed in a one-stage bench-scale reactor at temperatures of 400 and 600 °C. The catalyst was mixed with the raw material before the pyrolysis. Catalysts had a significant effect on the yield of products, because the amount of volatile products was higher in their presence, than without them. In case of kaolin, due to the structural transformation occurring between 500-600 °C, a significant increase in activity was observed in terms of pyrolysis reactions resulting in volatiles. The hydrogen content of the gas products increased significantly at a temperature of 600 °C and in thermo-catalysts pyrolysis. In the presence of catalysts, bio-oil had more favourable properties.

Understanding nitrogen dynamics in the Brazilian beef industry: A comprehensive decadal analysis

Brazil stands as a prominent beef producer and exporter, witnessing major transformations and expansions in its production chain over the past 20 years. These changes have prompted concerns regarding waste generation and environmental pressure. This study employs material flow analysis (MFA) to quantify nitrogen flows throughout the cattle slaughter process and subsequent beef consumption in Brazil, spanning from 2011 to 2021. The analysis encompasses co-production streams like leather, tallow, viscera, and blood. Nitrogen use efficiency (NUE) and the nitrogen cascade indicator (NCI) were used to evaluate efficiency and nitrogen accumulation in the production chain. Nitrogen inputs in the system increased by 8.47 %, while beef production rose by 7.29 %. In contrast, per capita beef consumption decreased by 1.29 kg, despite an overall consumption increase of 2.84 %, attributed to population growth in Brazil. Beef exports witnessed a notable surge of 86.03 %. Conversely, human excreta and food waste losses experienced increments of 10.88 % and 2.84 %, respectively. Examining NUE reveals the highest values during the slaughter phase (90 %), followed by processing, transportation, and storage stages (79-88 %). The consumption phase exhibited the lowest NUE values (29-34 %). Regarding the cumulative nitrogen effect, the NCI varied between 77 % and 82 % throughout the study period. This highlights opportunities for enhancing nitrogen use efficiency, particularly by addressing food waste at the consumer level. Notably, the study observes nitrogen accumulation across the Brazilian beef production chain, potentially contributing to the nitrogen cascade effect and heightening environmental pressure. Recognizing these dynamics provides avenues for targeted improvements, emphasizing the need to address nitrogen-related challenges and enhance sustainability in the beef production and consumption landscape.

Evaluating the effectiveness of sulfidated nano zerovalent iron and sludge co-application for reducing metal mobility in contaminated soil

Sewage sludge has long been applied to soils as a fertilizer yet may be enriched with leachable metal(loid)s and other pollutants. Sulfidated nanoscale zerovalent iron (S-nZVI) has proven effective at metal sorption; however, risks associated with the use of engineered nanoparticles cannot be neglected. This study investigated the effects of the co-application of composted sewage sludge with S-nZVI for the stabilization of Cd, Pb, Fe, Zn. Five treatments (control, Fe grit, composted sludge, S-nZVI, composted sludge and S-nZVI), two leaching fluids; synthetic precipitation leaching procedure (SPLP) and toxicity characteristic leaching procedure (TCLP) fluid were used, samples were incubated at different time intervals of 1 week, 1, 3, and 6 months. Fe grit proved most efficient in reducing the concentration of extractable metals in the batch experiment; the mixture of composted sludge and S-nZVI was the most effective in reducing the leachability of metals in the column systems, while S-nZVI was the most efficient for reducing about 80% of Zn concentration in soil solution. Thus, the combination of two amendments, S-nZVI incorporated with composted sewage sludge and Fe grit proved most effective at reducing metal leaching and possibly lowering the associated risks. Future work should investigate the longer-term efficiency of this combination.

Waste to resource: Mining antimicrobial peptides in sludge from metagenomes using machine learning

The emergence of antibiotic-resistant bacteria poses a huge threat to the treatment of infections. Antimicrobial peptides are a class of short peptides that widely exist in organisms and are considered as potential substitutes for traditional antibiotics. Here, we use metagenomics combined with machine learning to find antimicrobial peptides from environmental metagenomes and successfully obtained 16,044,909 predicted AMPs. We compared the abundance of potential antimicrobial peptides in natural environments and engineered environments, and found that engineered environments also have great potential. Further, we chose sludge as a typical engineered environmental sample, and tried to mine antimicrobial peptides from it. Through metaproteome analysis and correlation analysis, we mined 27 candidate AMPs from sludge. We successfully synthesized 25 peptides by chemical synthesis, and experimentally verified that 21 peptides had antibacterial activity against the 4 strains tested. Our work highlights the potential for mining new antimicrobial peptides from engineered environments and demonstrates the effectiveness of mining antimicrobial peptides from sludge.

Effect and potential mechanisms of sludge-derived chromium, nickel, and lead on soil nitrification: Implications for sustainable land utilization of digested sludge

Increasing occurrence of heavy metals (HMs) in sewage sludge threatens its widespread land utilization in China due to its potential impact on nutrient cycling in soil, requiring a better understanding of HM-induced impacts on nitrification. Herein, lab-scale experiments were conducted over 185-day, evaluating the effect of sludge-derived chromium (Cr3+), nickel (Ni2+), and lead (Pb2+) on soil nitrification at different concentrations. Quantitative polymerase chain reaction and linear regression results revealed an inhibitory sequence of gene abundance by HMs' labile fraction: ammonia-oxidizing bacteria (AOB)-ammonia monooxygenase (amoA)> nitrite oxidoreductase subunit alpha (nxrA)> nitrite oxidoreductase subunit beta (nxrB). The toxicity of HMs' incremental labile fraction decreased in the order of Ni2+>Cr3+>Pb2+, with respective threshold values of 5.01, 24.03 and 38.42 mg·kg-1. Furthermore, extending incubation time reduced HMs inhibition on ammonia oxidation, mainly related to their fraction bound to carbonate minerals. Random Forest analysis, variation partitioning analysis, and Mantel test indicated that soil physicochemical properties primarily affected nitrification genes, especially in the test of Cr3+ on AOB-amoA, nxrA, nxrB, Ni2+ for complete ammonia-oxidizing bacteria-amoA, and Pb2+ for nxrA and nxrB. These findings underline the importance of labile HMs fractions and soil physicochemical properties to nitrification, guiding the establishment of HM control standards for sludge utilization.

A review of the influence of heat drying, alkaline treatment, and composting on biosolids characteristics and their impacts on nitrogen dynamics in biosolids-amended soils

Application of biosolids to agricultural land has gained increasing attention due to their rich nutrient content. There are a variety of treatment processes for converting sewage sludge to biosolids. Different treatment processes can change the physicochemical properties of the raw sewage sludge and affect the dynamics of nutrient release in biosolids-amended soils. This paper reviews heat drying, alkaline treatment, and composting as biosolids treatment processes and discusses the effects of these treatments on biosolid nitrogen (N) content and availability. Most N in the biosolids remain in organic forms, regardless of biosolids treatment type but considerable variation exists in the mean values of total N and mineralizable N across different types of biosolids. The highest mean total N content was recorded in heat-dried biosolids (HDB) (4.92%), followed by composted biosolids (CB) (2.25%) and alkaline-treated biosolids (ATB) (2.14%). The mean mineralizable N value was similar between HDB and ATB, with a broader range of mineralizable N in ATB. The lowest N availability was observed in CB. Although many models have been extensively studied for predicting potential N mineralization in soils amended with organic amendments, limited research has attempted to model soil N mineralization following biosolids application. With biosolids being a popular, economical, and eco-friendly alternative to chemical N-fertilizers, understanding biosolids treatment effects on biosolids properties is important for developing a sound biosolids management system. Moreover, modeling N mineralization in biosolids-amended soils is essential for the adoption of sustainable farming practices that maximize the agronomic value of all types of biosolids.

Co-composting of sewage sludge as an effective technology for the production of substrates with reduced content of pharmaceutical residues

Sewage sludge is a valuable source of elements such as phosphorus and nitrogen. At the same time, heavy metals, emerging organic compounds, micropollutants (pharmaceuticals, pesticides, PCPs, microplastics), or some potentially dangerous bacteria can be present. In this study, the sewage sludge was aerobically treated by composting with other materials (co-composted), and the resulting substrate was tested for suitability of its use in agriculture. Closer attention was focused on the pharmaceuticals (non-steroidal antiphlogistics, sartanes, antiepileptics, caffeine, and nicotine metabolites) content and ecotoxicity of the resulting substrates in the individual phases of sludge co-composting. It has been verified that during co-composting there is a potential for reduction of the content of pharmaceutical in the substrates up to 90 %. The course of the temperature in the thermophilic phase is decisive. Growth and ecotoxicity experiments demonstrated that with a suitable co-composting procedure, the resulting stabilized matter is suitable as a substrate for use in plant production, and the risk of using sewage sludge on agricultural land is substantially reduced.

Assisting role of carbonaceous skeleton in sludge thermal hydrolysis and press filtration

As a key step in disposal and reutilization, sludge dewatering is very difficult, since extracellular polymers substances (EPS) binds the water, and compressible organic matter deforms and causes water filtration channels to collapse. Sludge dewaterability was demonstrated to enhance by carbonaceous skeleton (CSkel)-assisted thermal hydrolysis in our previously study. This work further investigated the assisting role of different types of CSkel in EPS decomposition during sludge thermal hydrolysis stage and channels reformation during press filtration stage. Two major types of CSkel, lignocellulosic waste (waste sawdust, waste straw, processing by-product) and protein-rich waste (shrimp shells, jatropha oil cake), were selected. The experimental results showed that in the thermal hydrolysis stage, the decomposition of lignocellulosic waste would increase fatty acids production by 28%, resulting in an acidic environment that reduced the total amount of three hydrophilic amino acids, i.e., glycine, serine and threonine. These promoted the release of water from the sludge. In the press filtration stage, average pore size of sludge was reduced by approximately 87% and nanoscale holes began to appear and increase. Assisting of CSkel rebuilt the filtration channels which brought good connectivity between the pores in sludge cake. Lignocellulosic waste proved significantly more effective than protein-rich waste in achieving a water removal rate of 88.63% under 1 MPa. This study provided a basis for selecting suitable CSkel to optimize sludge dewatering for subsequent utilization.

Micropollutants in biochar produced from sewage sludge: A systematic review on the impact of pyrolysis operating conditions

Biochar obtained from sewage sludge serves as a valuable soil amendment in agriculture, enhancing soil properties by increasing the nutrient content, cation exchange capacity, water retention, and oxygen transmission. However, its utilisation is hampered by the presence of micropollutants such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated dibenzodioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polychlorinated biphenyls (PCBs), and volatile organic compounds (VOCs). Previous studies indicate that the type and amount of micropollutants can be significantly adjusted by selecting the right process parameters. This literature review provides an overview of how (1) pyrolysis temperature, (2) carrier gas flow and type, (3) heating rate, and (4) residence time affect the concentration of micropollutants in biochar produced from sewage sludge. The micropollutants targeted are those listed by the European Biochar Certificate (EBC) and by the International Biochar Institution (IBI), including PAHs, PCDD/Fs, PCBs and VOCs. In addition, per- and poly-fluoroalkyl substances (PFAS) are also considered due to their presence in sewage sludge. The findings suggest that higher pyrolysis temperatures reduce micropollutant levels. Moreover, the injection of a carrier gas (N2 or CO2) during the pyrolysis and cooling processes effectively lowers PAHs and PCDD/Fs, by reducing the contact of biochar with oxygen, which is crucial in mitigating micropollutants. Nevertheless, limited available data impedes an assessment of the impact of these parameters on PFAS in biochar. In addition, further research is essential to understand the effects of carrier gas type, heating rate, and residence time in order to determine the optimal pyrolysis process parameters for generating clean biochar.

New insights into vermiremediation of sewage sludge: The effect of earthworms on micropollutants and vice versa

Vermicomposting represents an environmentally friendly method for the treatment of various types of biowastes, including sewage sludge (SS), as documented in numerous studies. However, there are few papers providing insights into the mechanisms and toxicity effects involved in SS vermicomposting to present a comprehensive overview of the process. In this work, the vermiremediation of SS containing various micropollutants, including pharmaceuticals, personal care products, endocrine disruptors, and per/polyfluoroalkyl substances, was studied. Two SSs originating from different wastewater treatment plants (WWTP1 and WWTP2) were mixed with a bulking agent, moistened straw, at ratios of 0, 25, 50, and 75% SS. Eisenia andrei earthworms were introduced into the mixtures, and after six weeks, the resulting materials were subjected to various types of chemical and toxicological analyses, including conventional assays (mortality, weight) as well as tissue- and cell-level assays, such as malondialdehyde production, cytotoxicity tests and gene expression assays. Through the vermiremediation process significant removal of diclofenac (90%), metoprolol (88%), telmisartan (62%), and triclosan (81%) was achieved. Although the concentrations of micropollutants were substantially different in the original SS samples, the micropollutants vermiaccumulated to a similar extent over the incubation period. The earthworms substantially eliminated the present bacterial populations, especially in the 75% SS treatments, in which the average declines were 90 and 79% for WWTP1 and WWTP2, respectively. To the best of our knowledge, this is the first study to investigate the vermiremediation of such a large group of micropollutants in real SS samples and provide a thorough evaluation of the effect of SS on earthworms at tissue and cellular level.

Effects of Mixtures of Engineered Nanoparticles and Cocontaminants on Anaerobic Digestion

The widespread application of nanotechnology inevitably leads to an increased release of engineered nanoparticles (ENPs) into the environment. Due to their specific physicochemical properties, ENPs may interact with other contaminants and exert combined effects on the microbial community and metabolism of anaerobic digestion (AD), an important process for organic waste reduction, stabilization, and bioenergy recovery. However, the complicated interactions between ENPs and other contaminants as well as their combined effects on AD are often overlooked. This review therefore focuses on the co-occurrence of ENPs and cocontaminants in the AD process. The key interactions between ENPs and cocontaminants and their combined influences on AD are summarized from the available literature, including the critical mechanisms and influencing factors. Some sulfides, coagulants, and chelating agents have a dramatic "detoxification" effect on the inhibition effect of ENPs on AD. However, some antibiotics and surfactants increase the inhibition of ENPs on AD. The reasons for these differences may be related to the interactive effects between ENPs and cocontaminants, changes of key enzyme activities, adenosine triphosphate (ATP) levels, reactive oxygen species (ROS) production, and microbial communities. New scientific opportunities for a better understanding of the coexistence in real world situations are converging on the scale of nanoparticles.

Physiological impact of personal care product constituents on non-target aquatic organisms

Personal care products (PCPs) are products used in cleaning, beautification, grooming, and personal hygiene. The rise in diversity, usage, and availability of PCPs has resulted in their higher accumulation in the environment. Thus, these constitute an emerging category of environmental contaminants due to the potential of its constituents (chemical and non-chemical) to induce various physiological effects even at lower concentrations (ng/L). For analyzing the impact of the PCPs constituents on the non-target organism about 300 article including research articles, review articles and guidelines were studied from 2000 to 2023. This review aims to firstly discuss the fate and accumulation of PCPs in the aquatic environment and organisms; secondly provides overview of environmental risks that are linked to PCPs; thirdly review the trends, current status of regulations and risks associated with PCPs and finally discuss the knowledge gaps and future perspectives for future research. The article discusses important constituents of PCPs such as antimicrobials, cleansing agents and disinfectants, fragrances, insect repellent, moisturizers, plasticizers, preservatives, surfactants, UV filters, and UV stabilizers. Each of them has been found to display certain toxic impact on the aquatic organisms especially the plasticizers and UV filters. These continuously and persistently release biologically active and inactive components which interferes with the physiological system of the non-target organism such as fish, corals, shrimps, bivalves, algae, etc. With a rise in the number of toxicity reports, concerns are being raised over the potential impacts of these contaminant on aquatic organism and humans. The rate of adoption of nanotechnology in PCPs is greater than the evaluation of the safety risk associated with the nano-additives. Hence, this review article presents the current state of knowledge on PCPs in aquatic ecosystems.

The role of marine pollution on the emergence of fish bacterial diseases

Marine pollution and bacterial disease outbreaks are two closely related dilemmas that impact marine fish production from fisheries and mariculture. Oil, heavy metals, agrochemicals, sewage, medical wastes, plastics, algal blooms, atmospheric pollutants, mariculture-related pollutants, as well as thermal and noise pollution are the most threatening marine pollutants. The release of these pollutants into the marine aquatic environment leads to significant ecological degradation and a range of non-infectious disorders in fish. Marine pollutants trigger numerous fish bacterial diseases by increasing microbial multiplication in the aquatic environment and suppressing fish immune defense mechanisms. The greater part of these microorganisms is naturally occurring in the aquatic environment. Most disease outbreaks are caused by opportunistic bacterial agents that attack stressed fish. Some infections are more serious and occur in the absence of environmental stressors. Gram-negative bacteria are the most frequent causes of these epizootics, while gram-positive bacterial agents rank second on the critical pathogens list. Vibrio spp., Photobacterium damselae subsp. Piscicida, Tenacibaculum maritimum, Edwardsiella spp., Streptococcus spp., Renibacterium salmoninarum, Pseudomonas spp., Aeromonas spp., and Mycobacterium spp. Are the most dangerous pathogens that attack fish in polluted marine aquatic environments. Effective management strategies and stringent regulations are required to prevent or mitigate the impacts of marine pollutants on aquatic animal health. This review will increase stakeholder awareness about marine pollutants and their impacts on aquatic animal health. It will support competent authorities in developing effective management strategies to mitigate marine pollution, promote the sustainability of commercial marine fisheries, and protect aquatic animal health.

Bacteriophage-based biosensors for detection of pathogenic microbes in wastewater

Wastewater is discarded from several sources, including industry, livestock, fertilizer application, and municipal waste. If the disposed of wastewater has not been treated and processed before discharge to the environment, pathogenic microorganisms and toxic chemicals are accumulated in the disposal area and transported into the surface waters. The presence of harmful microbes is responsible for thousands of human deaths related to water-born contamination every year. To be able to take the necessary step and quick action against the possible presence of harmful microorganisms and substances, there is a need to improve the effective speed of identification and treatment of these problems. Biosensors are such devices that can give quantitative information within a short period of time. There have been several biosensors developed to measure certain parameters and microorganisms. The discovered biosensors can be utilized for the detection of axenic and mixed microbial strains from the wastewaters. Biosensors can further be developed for specific conditions and environments with an in-depth understanding of microbial organization and interaction within that community. In this regard, bacteriophage-based biosensors have become a possibility to identify specific live bacteria in an infected environment. This paper has investigated the current scenario of microbial community analysis and biosensor development in identifying the presence of pathogenic microorganisms.

Unlocking fertilization potential of anaerobically digested sewage sludge centrate for protein-rich rice cultivation with composted sludge amendment

The use of composted sewage sludge (CSS) and centrate as alternatives to synthetic fertilizers in rice cultivation holds great promise. This study aims to determine the effects of varying doses and timings of centrate derived from anaerobically digested sewage sludge on rice yield, nutrient quality, and soil fertility when applied as a topdressing to rice fields fertilized with CSS. At the panicle initiation (PI) stage, 100, 300, and 500 kg N ha-1 of centrate topdressing (CT100, CT300, and CT500, respectively) was applied. In addition, different topdressing timings at a total dose of 500 kg N ha-1 were evaluated, including a two-split application (40% at active tillering (AT) and 60% at PI; CT500S2) and a three-split application (40% at AT + 40% at PI + 20% at heading; CT500S3). At a rate of 160 kg N ha-1, CSS was used as a base fertilizer in all treatments. A control treatment received synthetic fertilizers at a rate of 160 kg N ha-1 as a base application and 100 kg N ha-1 as a topdressing. Results showed that CSS-treated rice plants exhibited a lower N status and leaf chlorophyll content during the vegetative growth stage; however, the split application of centrate topdressing improved plant N status, resulting in an increase in biomass and grain yield. Centrate and CSS tended to increase the mineral content of rice; nevertheless, a significant accumulation of As in grains raised concerns about food safety. Combining CSS and centrate has the potential to increase rice production, improve grain nutritional value, and decrease reliance on synthetic fertilizers. However, it is essential to optimize this fertilization, mitigate environmental risks, and ensure food safety by employing appropriate fertilization dosing and timing as well as appropriate field management strategies.

From the importance of organic carbon in reproduction tests with Eisenia fetida

The standard Eisenia fetida chronic toxicity reproduction test is normalized and needs up to 8 weeks of experimentation. Many matrixes have shown toxic effects on the earthworms' survey, growth and reproduction. But the food factor may affect the organisms' responses to contaminated media in such tests. We try to evaluate the effect, or not, of the organic carbon content present in the environment, as spreadable organic wastes added in soil, on the reproduction test of Eisenia fetida. We confirm the influence of the organic matter content on earthworm reproduction. This "food" factor must be considered when studying environmental samples rich in organic matter, since that could mask potentially harmful effects. To minimize this potential "food" effect during reproduction tests, we recommend an inverse gradient of organic matter contribution by the "horse dung" food applied in all conditions according to the dose of agricultural amendments tested.

Hydrothermal carbonization of milk/dairy processing sludge: Fate of plant nutrients

Dairy processing sludge (DPS) is a byproduct generated in wastewater treatment plants located in dairy (milk) processing companies (waste activated sludge). DPS presents challenges in terms of its management (as biosolids) due to its high moisture content, prolonged storage required, uncontrolled nutrient loss and accumulation of certain substances in soil in the proximity of dairy companies. This study investigates the potential of hydrothermal carbonization (HTC) for recovery of nutrients in the form of solid hydrochar (biochar) produced from DPS originating from four different dairy processing companies. The HTC tests were carried out at 160 °C, 180 °C, 200 °C and 220 °C, and a residence time of 1h. The elemental properties of hydrochars (biochars), the content of primary and secondary nutrients, as well as contaminants were examined. The transformation of phosphorus in DPS during HTC was investigated. The fraction of plant available phosphorus was determined. The properties of hydrochar (biochar) were compared against the European Union Fertilizing Products Regulation. The findings of this study demonstrate that the content of nutrient in hydrochars (biochars) meet the requirements for organo-mineral fertilizer with nitrogen and phosphorus as the declared nutrients (13.9-26.7%). Further research on plant growth and field tests are needed to fully assess the agronomic potential of HTC hydrochar (biochar).

Characterization and ecotoxicological risk assessment of sewage sludge from industrial and non-industrial cities

The present study highlights the occurrence and the temporal variations of physicochemical properties, and heavy metals in the sludge from sewage treatment plants (STPs) located in industrial (two sites) and non-industrial (one site) cities of Haryana, India. The sludge was acidic (5.59) to neutral (7.21) with a mean EC of 7.4 dS m-1. Prominent heavy metals present in the sewage sludge from industrial sites were Cd, Ni, and Cr with maximum values of 2.83, 1449.0, and 3918.5 mg kg-1, respectively. The contamination and enrichment factor better explained the buildup of Ni, Cr, and Cu in the sewage sludge from industrial sites. The pH, total carbon, phosphorus, and other water-soluble anions, viz. SO42-, Cl-, HCO3-, and PO43-, were the most important attributes of sludge controlling the binding and removal of the metals with particulate matters during the phase separation in STPs. These attributes explained about 90% of the variation in Cd, Ni, Cr, Cu, Mn, and Zn content of the sludge from different STPs. Sludge from the non-industrial site had a low potential ecological risk index of 74.0 compared to a very high-risk index of 2186.5 associated with the industrial sites. This study concludes that besides the concentration of the heavy metals, the enrichment factor coupled with geo-accumulation or ecological risk index can effectively categorize the sludge. However, these indices need to be linked with bioaccumulation, bioaccessibility, and biomass quality under different agroecologies for guiding the safer use of sewage sludge in agriculture.

Assessing the chronic toxicity of spreading organic amendments on agricultural soil: Tests on earthworms and plants

Recycling organic wastes on agricultural soils improves the soil quality, but the environmental and health impact of these organic amendments closely depends on their origins, their bio-physicochemical characteristics and the considered organisms potentially affected. The aim of this study was to assess the potential chronic ecotoxicity of spreading organic amendments on agricultural soils. To do this, we characterized three different organic amendments: sewage sludge from an urban wastewater treatment plant, cow manure and liquid dairy manure. Their chronic ecotoxicity was studied through assays exposing earthworms of the species Eisenia fetida and two plants: Medicago sativa and Sinapis alba. Of the three amendments, the sewage sludge presented the highest concentrations of micropollutants and a considerable fraction of available and biodegradable organic matter. The cow manure and liquid dairy manure had lower chemical contamination and similar characteristics with lower biodegradable fractions of their organic matter. No chronic phytotoxicity was evidenced: on the contrary, particularly with sewage sludge, the germination rate and aerial and root biomass of the two plants increased. Considering earthworms, their biomass increased considerably during the reproduction assays in soil amended with sewage sludge, which contained the more bioavailable organic matter. Nonetheless, the earthworms presented an inhibition close to 78% of the production of juveniles when exposed to sewage sludge exceeding 20 g.kg-1 DW (that means 2 times the agronomic dose). This reprotoxic effect was also observed in the presence of liquid dairy manure, but not with cow manure. At the end of the assays, the glycogen and protein reserves in earthworms exposed to sewage sludge were inferior to that of control earthworms, respectively around 50% and 30%. For the earthworms exposed to liquid dairy manure, protein and lipid reserves increased. In the case of liquid dairy manure, this reprotoxic effect did not appear to be linked to the presence of micropollutants. In conclusion, our results confirm the need to use several ecotoxicity assays at different biological levels and with different biological models to assess the ecotoxic impacts of soil amendments. Indeed, although certain organic wastes present a strong nutritional potential for both plants and earthworms, a not inconsiderable risk was apparent for the reproduction of the latter. An integrated ecotoxicity criterion that takes into account a weighted sum of the different results would guide the utilization of organic amendments while ensuring the good health of agricultural ecosystems.

A new simpler and reliable method for determining mineral oil in sewage sludge: Influence of biogenic compounds for the quantitative analysis of C10-C40 hydrocarbons

The characterization of organic contaminants in sewage sludge is a fundamental step to address the relevant most appropriate management practice. In this perspective, C10-C40 hydrocarbon content was considered in Italy a crucial parameter to be considered, in spite of its irrelevance in the literature. The very complex mixture of organic substances of both biogenic and anthropogenic origin the sludge is made up of makes sewage sludge a matrix of uniqueness nature, and the analytic determination of hydrocarbon content through conventional procedures may be subjected to overestimation. In this work, optimization of two conventional protocols for the determination of mineral oil (EN14039 and IRSA CNR gravimetric method) were run with attention to anthropogenic compounds potentially affecting the C10-C40 mineral hydrocarbons determination. Effects from the first manipulations of sewage sludge samples to extraction procedure and clean-up operations were investigated. A new simple procedure was set up and tested on 30 samples from different wastewater treatment plants (WWTPs). Through a simple extraction with hexane (12 mL per 2 g of dried sludge, acidified with HCl conc.) at room temperature for 2 h, followed by a clean-up on Florisil column (10 mL-2 g) a confident determination of C10-C40 were obtained with respect to conventional optimized procedures. Variability within the range 0.06-9.49% was calculated with respect to the average value determined using three different methods, with an average value of 2.48 ± 2.37%, demonstrating the robustness of the determination. Up to 3% of the total hydrocarbons were identified as naturally occurring, namely terpenes, squalenes and deoxygenized sterols, passed through the clean-up Florisil column. A significant incidence (up to 75%) of the final overall C10-C40 content was found to be related to the C10-C20 component, originally present in the commercial polyelectrolytes in emulsion, widely used for conditioning before mechanical dewatering.

A review on the fate and effects of contaminants in biosolids applied on land: Hazards and government regulatory policies

The increase in world population growth and its resultant increase in industrial production to meet its need, have continued to raise the volume of wastewater received by treatment plant facilities. This has expectedly, led to an upsurge in the volume of sewage sludge and biosolids generated from wastewater treatment systems. Biosolids are best managed by application on land because of their agronomic benefits. However, this usage has been discovered to negatively affect humans and impact the environment due to the accumulation of minute concentrations of contaminants still present in the biosolid after treatment, hence the need for government regulations. This review article examined the fate and effects of pollutants, especially persistent organic pollutants (PoPs) of concern and emerging contaminants found in biosolids used for land applications, and also discussed government regulations on biosolid reuse from the perspectives of the two major regulations governing biosolid land application-the EU's Sludge Directive and USEPA's Part 503 Rule, in an attempt to draw attention to their outdated contents since enactment, as they do not currently meet the challenges of biosolid land application and thus, require a comprehensive update. Any update efforts should focus on USEPA's Part 503 Rule, which is less stringent on the allowable concentration of biosolid pollutants. Furthermore, an update should include specific regulations on new and emerging contaminants and persistent organic pollutants (PoPs) such as microplastics, pharmaceutical and personal care products (P&PCPs), surfactants, endocrine-disrupting chemicals, flame retardants, pathogens, and organic pollutants; further reduction of heavy metal standard limits, and consideration of soil phosphate-metal interactions to regulate biosolid agronomic loading rate. Future biosolid research should focus on the concentration of TCS, TCC, and emerging pharmaceuticals, as well as Microplastic transport in biosolid-amended soils, soil-plant transfer mechanism, and metabolism of PFAs in the soils; all of which will inform government policies on biosolid application on land.

Concentration of the main persistent organic pollutants in sewage sludge in relation to wastewater treatment plant parameters and sludge stabilisation

Concentration of 16 polycyclic aromatic hydrocarbons (PAHs), 7 polychlorinated biphenyls (PCBs), and 11 organochlorine pesticides (OCPs) in sewage sludge from 40 wastewater treatment plants (WWTPs) was investigated. Relationship between pollutant sludge contents, main WWTP parameters and type of sludge stabilisation was carefully evaluated. Average load of PAHs, PCBs, and OCPs in different sludges from Czech Republic was 3096, 95.7 and 76.1 μg/kg dry weight, respectively. There were moderate/strong correlations among the individual tested pollutants in sludge (r = 0.40-0.76). Relationship between total pollutant contents in sludge, common WWTP parameters and sludge stabilisation was not evident. Only individual pollutants such anthracene and PCB 52 correlated significantly (P < 0.05) with biochemical oxygen demand (r = -0.35) and chemical oxygen demand removal efficiencies (r = -0.35), suggesting recalcitrance to degradation during wastewater treatment. When sorted according to the design capacity, a linear correlation between WWTP size and pollutant contents in sludge was evident with growing WWTP capacity. Our study indicated that WWTPs with anaerobic digestion are prone to accumulate a statistically higher content of PAHs and PCBs (P < 0.05) in digested sludges compared to aerobically digested ones. The influence of anaerobic digestion temperature of treated sludge on tested pollutants was not evident.

Urban sewage sludge stabilization by alkalization-composting-vermicomposting process: Crop-livestock residue use

Waste management practices are vital for human health and the environment in a world where natural resources stress is expected to increase with the growth of population. Our study aimed to evaluate the potential use of crop-livestock residue as a bulking agent associated with the ideal level of hydrated lime for the stabilization and sanitization of urban sewage sludge through the alkalization-composting process. Therefore, we determined the alkalization efficiency on the heavy metal concentration in urban sewage sludge, quantified the viable eggs of helminths in pure and alkalized sludge, and measured the rate of earthworms (Eisenia fetida) surviving in the vermicomposting process using different levels of alkalized urban sewage sludge associated with crop-livestock residue. Four sequential trials were carried out in a completely randomized design with three replicates. The lime alkalization reduced the levels of Ba, As, Pb, Cu, Cr, Mo, Ni, and Zn compared to the pure urban sewage sludge. Using 30% w/w of lime in the urban sewage sludge (SS-30) for composting process reduced the viable helminth eggs by 71, 72, and 69% for sugarcane bagasse (Saccharum officinarum; SB), fresh chopped Napier-grass (Pennisetum purpureum; NG), and bovine ruminal content (BR), respectively. The ideal level of hydrated lime for stabilization and sanitization of urban sewage sludge was found to be 30%, which was able to reduce the heavy metals. The residues have the potential as a bulking agent for the composting of urban sewage sludge when associated with alkalization. The lime alkalization decreases the total number of helminth eggs and the number of viable eggs. The possibility of starting a vermicomposting using the mixtures is promising, evidenced by the earthworm survival in composting urban sewage sludge mixed with crop-livestock residues after 45 days of composting. The earthworm survival is maintained by an association of at least 80% of the crop-livestock residues.

Multi-pollutants (organic and inorganic) removal potential of scenedesmus species on municipal sewage water and analyzed their phycoremediation mechanisms

Municipal sledge water is a combination of residential wastewater, industrial effluent, and precipitation water. The water quality parameters analyses results demonstrated that most of the parameters (pH: 5.6 ± 0.3, Turbidity: 102.31 ± 2.8 mg L^-1, TH: 946.38 ± 3.7 mg L^-1, BOD: 295.63 ± 5.4 mg L^-1, COD: 482.41 ± 4.9 mg L^-1, Ca: 278.74 ± 1.8 mg L^-1, SO₄^2-: 559.64 ± 11.4 mg L^-1, Cd: 18.56 ± 1.37 mg L^-1, Cr: 31.25 ± 1.49 mg L^-1, Pb: 21.45 ± 1.12 mg L^-1, and Zn: 48.65 ± 1.56 mg L^-1) were considerably increased in quantities with slightly acidic in condition. The in-vitro phycoremediation study was carried out for two weeks with pre-identified Scenedesmus sp. Biomass in different groups of treatments (A, B, C, and D). Interestingly, most of the physicochemical parameters were significantly reduced in group C (4 × 10³ cells mL^-1) treated municipal sledge water in a shorter treatment period than in the other treatment groups. The phycoremediation percentage of group C were found as pH: 32.85%, EC:52.81%, TDS: 31.32%, TH: 25.58%, BOD:34.02%, COD:26.47%, Ni: 58.94%, Ca:44.75%, K: 42.74%, Mg:39.52%, Na: 36.55%, Fe: 68%, Cl: 37.03%, SO₄^2-: 16.77%, PO₄^3-: 43.15%, F: 55.55%, Cd:44.88%, Cr:37.21%, Pb:43.8%, and Zn:33.17%. These findings suggest that increased biomass from Scenedesmus sp. Can be used to significantly remediate municipal sledge water and that the obtained biomass and treated sledge can be used as feedstock's for bio fuel as well as bio fertilizer, respectively.

Mini-review of sewage sludge parameters related to system modelling

System modelling of sewage sludge (SS) treatment attracts a growing interest for better comparison and optimisation of technologies. However, SS parameters need to be generalised to be used in holistic assessments, since scattered data may inhibit the development and interpretation of system models. A review of the literature on SS parameters relevant to modelling SS treatment systems revealed 208 datasets published in 162 publicly available scientific papers. We treated thickened and dewatered sludge in the same data analysis, but in some cases, this was an incorrect assumption. The compositional data showed significant variations, but most of the data subscribed to a lognormal distribution, albeit with varying levels of significance. On average, the thickened sludge contained 3.3 ± 1.7% total solid (TS), and the dewatered sludge contained 21.0 ± 6.7% TS. For the combined data, the average Ash content was 32.4 ± 11.8% of TS. Other characteristic parameters were the lower heating value (LHV) of 22.1 ± 2.1 MJ kg^-1 volatile solid (VS) and the biochemical methane potential (BMP) of 0.25 ± 0.11 m³ CH₄ kg^-1 VS. Fertiliser-related elements were on average 53.3 ± 9.3% C in VS, 6.8 ± 2.2% N in VS, 6.7 ± 2.4% P in Ash and 1.7 ± 1.3% K in Ash. The data reviewed herein provide a good basis for assessing the generality of individual SS data and for selecting key parameters for modelling SS treatment systems. However, the review reveals a need for the better characterisation of SS in the future.